Skip to content

P
Paddle

机器未来 / Paddle
与 Fork 源项目一致

Fork自 PaddlePaddle / Paddle

通知 1
Star 1
Fork 0
P
Paddle
提交 04a35150 编写于 作者: Y yangyaming
浏览文件
操作

Remove MulValu* and reduce time cost for unit test.

上级 07f3f07f
显示空白变更内容
内联 并排
Showing with 3 addition and 531 deletion
paddle/function/MulValueOp.cpp 已删除 100644 → 0
浏览文件 @ 07f3f07f
/* Copyright (c) 2016 PaddlePaddle Authors. All Rights Reserve.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License. */
#include "MulValueOp.h"
#include "paddle/function/TensorShape.h"
namespace paddle {
template <>
void MulValue<DEVICE_TYPE_CPU>(real* outputs,
const real* inputs,
const real* indices,
const TensorShape shape,
const FuncConfig& conf) {
real value = conf.get<real>("value");
int number = shape[0];
int channel = shape[1];
int height = shape[2];
int width = shape[3];
memcpy(outputs, inputs, number * channel * height * width * sizeof(real));
for (int n = 0; n < number; ++n) {
// indices start from 1
int offset = n * 6;
for (int c = indices[offset] - 1; c < indices[offset + 1]; ++c) {
for (int h = indices[offset + 2] - 1; h < indices[offset + 3]; ++h) {
for (int w = indices[offset + 4] - 1; w < indices[offset + 5]; ++w) {
int idx = ((n * channel + c) * height + h) * width + w;
outputs[idx] *= value;
}
}
}
}
}
template <>
void MulValueGrad<DEVICE_TYPE_CPU>(const real* inGrad,
real* outGrad,
const real* indices,
const TensorShape shape,
const FuncConfig& conf) {
real value = conf.get<real>("value");
int number = shape[0];
int channel = shape[1];
int height = shape[2];
int width = shape[3];
for (int n = 0; n < number; ++n) {
for (int c = 0; c < channel; ++c) {
for (int h = 0; h < height; ++h) {
for (int w = 0; w < width; ++w) {
int idx = ((n * channel + c) * height + h) * width + w;
int offset = n * 6;
if (c >= (indices[offset] - 1) && c <= (indices[offset + 1] - 1) &&
h >= (indices[offset + 2] - 1) &&
h <= (indices[offset + 3] - 1) &&
w >= (indices[offset + 4] - 1) &&
w <= (indices[offset + 5] - 1)) {
outGrad[idx] += inGrad[idx] * value;
} else {
outGrad[idx] += inGrad[idx];
}
}
}
}
}
}
/**
* \brief For each instance, MulValue can be used to multiply a value to a
* specified sub continuous region. By providing start index and end
* index for C/H/W, you can specify the location and shape of the region.
*
* Argument in this Function:
* \param inputs A 4-D tensor with shape [N, C, H, W], only one input.
* \param indices A 2-D tensor with shape [N, 6], indicates the sub region.
* \param outputs A 4-D tensor with same shape as inputs, output value.
*/
template <DeviceType Device>
class MulValueFunc : public FunctionBase {
public:
void init(const FuncConfig& config) override { conf_ = config; }
void calc(const BufferArgs& inputs, const BufferArgs& outputs) override {
CHECK_EQ(2UL, inputs.size());
CHECK_EQ(1UL, outputs.size());
CHECK_EQ(outputs[0].getArgType(), ASSIGN_TO);
TensorShape shape = inputs[0].shape();
MulValue<Device>(outputs[0].data<real>(),
inputs[0].data<real>(),
inputs[1].data<real>(),
shape,
conf_);
}
private:
FuncConfig conf_;
};
/**
* \brief The backward propagation of MulValue Function.
*
* Argument in this Function:
* \param inputs A 4-D tensor with shape [N, C, H, W], output gradient.
* \param indices A 2-D tensor with shape [N, 6], indicates the sub region.
* \param outputs A 4-D tensor with shape [N, C, H, W], gradient of input value.
*/
template <DeviceType Device>
class MulValueGradFunc : public FunctionBase {
public:
void init(const FuncConfig& config) override { conf_ = config; }
void calc(const BufferArgs& inputs, const BufferArgs& outputs) override {
CHECK_EQ(2UL, inputs.size());
CHECK_EQ(1UL, outputs.size());
CHECK_EQ(outputs[0].getArgType(), ADD_TO);
TensorShape shape = inputs[0].shape();
MulValueGrad<Device>(inputs[0].data<real>(),
outputs[0].data<real>(),
inputs[1].data<real>(),
shape,
conf_);
}
private:
FuncConfig conf_;
};
REGISTER_TYPED_FUNC(MulValue, CPU, MulValueFunc);
REGISTER_TYPED_FUNC(MulValueGrad, CPU, MulValueGradFunc);
#ifdef PADDLE_WITH_CUDA
REGISTER_TYPED_FUNC(MulValue, GPU, MulValueFunc);
REGISTER_TYPED_FUNC(MulValueGrad, GPU, MulValueGradFunc);
#endif
} // namespace paddle
paddle/function/MulValueOp.h 已删除 100644 → 0
浏览文件 @ 07f3f07f
/* Copyright (c) 2016 PaddlePaddle Authors. All Rights Reserve.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License. */
#pragma once
#include "Function.h"
namespace paddle {
/**
* \brief Function to multiply a value to values in specified sub continuous
* region. Indices must be provided to indcate the location and shape of
* the region and the multiplied value is passed by configure variable.
*
*
* \param[out] outputs Output value.
* \param[in] inputs Input data which contains NCHW information.
* \param[in] indices Indices data to indcate the sub region.
* \param[in] shape Tensor shape of input value.
* \param[in] conf Configure variable which contains the multiplied value.
*/
template <DeviceType Device>
void MulValue(real* outputs,
const real* inputs,
const real* indices,
const TensorShape shape,
const FuncConfig& conf);
/**
* \brief Back propagation function of MulValue.
*
* \param[out] inGrad Gradients of previous layer.
* \param[in] outGrad Output gradient.
* \param[in] indices Indices data.
* \param[in] shape The Shape of input tensor.
* \param[in] conf Configure variable.
*/
template <DeviceType Device>
void MulValueGrad(const real* inGrad,
real* outGrad,
const real* indices,
const TensorShape shape,
const FuncConfig& conf);
} // namespace paddle
paddle/function/MulValueOpGpu.cu 已删除 100644 → 0
浏览文件 @ 07f3f07f
/* Copyright (c) 2016 PaddlePaddle Authors. All Rights Reserve.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License. */
#include "MulValueOp.h"
#include "hl_base.h"
namespace paddle {
__global__ void KeMulValue(real* outputs,
const real* inputs,
const real* indices,
real value,
int channel,
int height,
int width,
int nthreads) {
const int idx = threadIdx.x + blockIdx.x * blockDim.x;
if (idx < nthreads) {
const int w = idx % width;
const int h = (idx / width) % height;
const int c = (idx / width / height) % channel;
const int n = idx / width / height / channel;
const int offset = n * 6;
if (c >= (indices[offset] - 1) && c <= (indices[offset + 1] - 1) &&
h >= (indices[offset + 2] - 1) && h <= (indices[offset + 3] - 1) &&
w >= (indices[offset + 4] - 1) && w <= (indices[offset + 5] - 1)) {
outputs[idx] = inputs[idx] * value;
} else {
outputs[idx] = inputs[idx];
}
}
}
template <>
void MulValue<DEVICE_TYPE_GPU>(real* outputs,
const real* inputs,
const real* indices,
const TensorShape shape,
const FuncConfig& conf) {
real value = conf.get<real>("value");
int number = shape[0];
int channel = shape[1];
int height = shape[2];
int width = shape[3];
size_t nth = number * channel * height * width;
int blockSize = 1024;
int gridSize = (nth + blockSize - 1) / blockSize;
KeMulValue<<<gridSize, blockSize, 0, STREAM_DEFAULT>>>(
outputs, inputs, indices, value, channel, height, width, nth);
CHECK_SYNC("MulValue");
}
__global__ void KeMulValueDiff(const real* inGrad,
real* outGrad,
const real* indices,
real value,
int channel,
int height,
int width,
int nthreads) {
const int idx = threadIdx.x + blockIdx.x * blockDim.x;
if (idx < nthreads) {
const int w = idx % width;
const int h = (idx / width) % height;
const int c = (idx / width / height) % channel;
const int n = idx / width / height / channel;
const int offset = n * 6;
if (c >= (indices[offset] - 1) && c <= (indices[offset + 1] - 1) &&
h >= (indices[offset + 2] - 1) && h <= (indices[offset + 3] - 1) &&
w >= (indices[offset + 4] - 1) && w <= (indices[offset + 5] - 1)) {
outGrad[idx] += inGrad[idx] * value;
} else {
outGrad[idx] += inGrad[idx];
}
}
}
template <>
void MulValueGrad<DEVICE_TYPE_GPU>(const real* inGrad,
real* outGrad,
const real* indices,
const TensorShape shape,
const FuncConfig& conf) {
real value = conf.get<real>("value");
int number = shape[0];
int channel = shape[1];
int height = shape[2];
int width = shape[3];
size_t nth = number * channel * height * width;
int blockSize = 1024;
int gridSize = (nth + blockSize - 1) / blockSize;
KeMulValueDiff<<<gridSize, blockSize, 0, STREAM_DEFAULT>>>(
inGrad, outGrad, indices, value, channel, height, width, nth);
CHECK_SYNC("MulValueGrad");
}
} // namespace paddle
paddle/function/MulValueOpTest.cpp 已删除 100644 → 0
浏览文件 @ 07f3f07f
/* Copyright (c) 2016 PaddlePaddle Authors. All Rights Reserve.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License. */
#include <gtest/gtest.h>
#include "FunctionTest.h"
namespace paddle {
TEST(MulValue, real) {
for (size_t numSamples : {5, 32}) {
for (size_t channels : {5, 5, 32}) {
for (size_t imgSizeH : {5, 33, 100}) {
for (size_t imgSizeW : {5, 32, 96}) {
for (real value : {-0.5, 0.0, 0.5}) {
for (bool firstHalf : {false, true}) {
VLOG(3) << " numSamples=" << numSamples
<< " channels=" << channels << " imgSizeH=" << imgSizeH
<< " imgSizeW=" << imgSizeW;
for (bool test_grad : {false}) {
CpuGpuFuncCompare compare(
test_grad ? "MulValueGrad" : "MulValue",
FuncConfig().set<real>("value", value));
TensorShape shape{numSamples, channels, imgSizeH, imgSizeW};
TensorShape indicesShape{numSamples, 6};
compare.addInputs(BufferArg(VALUE_TYPE_FLOAT, shape));
compare.addInputs(BufferArg(VALUE_TYPE_FLOAT, indicesShape));
compare.registerInitCallback([=](BufferArg& arg, size_t index) {
if (index == 1) {
real* data = (real*)arg.data();
for (size_t i = 0; i < numSamples; ++i) {
size_t offset = i * 6;
data[offset] = firstHalf ? 1 : (int)channels / 2;
data[offset + 1] =
firstHalf ? (int)channels / 2 : channels;
data[offset + 2] = firstHalf ? 1 : (int)imgSizeH / 2;
data[offset + 3] =
firstHalf ? (int)imgSizeH / 2 : imgSizeH;
data[offset + 4] = firstHalf ? 1 : (int)imgSizeW / 2;
data[offset + 5] =
firstHalf ? (int)imgSizeW / 2 : imgSizeW;
}
}
});
compare.addOutputs(BufferArg(VALUE_TYPE_FLOAT,
shape,
test_grad ? ADD_TO : ASSIGN_TO),
test_grad ? ADD_TO : ASSIGN_TO);
compare.run();
}
}
}
}
}
}
}
}
} // namespace paddle
paddle/function/ScaleSubRegionOpTest.cpp
浏览文件 @ 04a35150
...@@ -19,9 +19,9 @@ namespace paddle { ...@@ -19,9 +19,9 @@ namespace paddle {
TEST(ScaleSubRegion, real) { TEST(ScaleSubRegion, real) {
for (size_t numSamples : {5, 32}) { for (size_t numSamples : {5, 32}) {
for (size_t channels : {5, 5, 32}) { for (size_t channels : {5, 32}) {
for (size_t imgSizeH : {5, 33, 100}) { for (size_t imgSizeH : {5, 33}) {
for (size_t imgSizeW : {5, 32, 96}) { for (size_t imgSizeW : {5, 32}) {
for (real value : {-0.5, 0.0, 0.5}) { for (real value : {-0.5, 0.0, 0.5}) {
for (bool firstHalf : {false, true}) { for (bool firstHalf : {false, true}) {
VLOG(3) << " numSamples=" << numSamples VLOG(3) << " numSamples=" << numSamples
......
paddle/gserver/layers/MulValueLayer.cpp 已删除 100644 → 0
浏览文件 @ 07f3f07f
/* Copyright (c) 2016 PaddlePaddle Authors. All Rights Reserve.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License. */
#include "MulValueLayer.h"
#include "paddle/utils/Stat.h"
namespace paddle {
REGISTER_LAYER(mul_value, MulValueLayer);
bool MulValueLayer::init(const LayerMap& layerMap,
const ParameterMap& parameterMap) {
Layer::init(layerMap, parameterMap);
CHECK_EQ(static_cast<int>(inputLayers_.size()), 2);
auto& conf = config_.inputs(0).mul_value_conf();
value_ = conf.value();
createFunction(forward_, "MulValue", FuncConfig().set("value", value_));
createFunction(backward_, "MulValueGrad", FuncConfig().set("value", value_));
return true;
}
void MulValueLayer::forward(PassType passType) {
Layer::forward(passType);
auto in0 = getInput(0);
imgH_ = in0.getFrameHeight();
imgW_ = in0.getFrameWidth();
if (imgH_ == 0 || imgW_ == 0) {
auto& conf = config_.inputs(0).mul_value_conf();
imgH_ = conf.image_conf().img_size_y();
imgW_ = conf.image_conf().img_size();
}
MatrixPtr imgV = in0.value;
size_t batchSize = imgV->getHeight();
size_t spatialSize = imgH_ * imgW_;
channelsNum_ = imgV->getWidth() / spatialSize;
shape_ = TensorShape({batchSize, channelsNum_, imgH_, imgW_});
resetOutput(batchSize, imgV->getWidth());
MatrixPtr indicesV = getInputValue(1);
indicesShape_ = TensorShape({batchSize, 6});
REGISTER_TIMER_INFO("MulValueForward", getName().c_str());
BufferArgs inArgs;
BufferArgs outArgs;
inArgs.addArg(*imgV, shape_);
inArgs.addArg(*indicesV, indicesShape_);
MatrixPtr outV = getOutputValue();
outArgs.addArg(*outV, shape_, ASSIGN_TO);
forward_[0]->calc(inArgs, outArgs);
}
void MulValueLayer::backward(const UpdateCallback& callback) {
REGISTER_TIMER_INFO("MulValueBackward", getName().c_str());
BufferArgs inArgs;
BufferArgs outArgs;
inArgs.addArg(*getOutputGrad(), shape_);
inArgs.addArg(*getInputValue(1), indicesShape_);
outArgs.addArg(*getInputGrad(0), shape_, ADD_TO);
backward_[0]->calc(inArgs, outArgs);
}
} // namespace paddle
paddle/gserver/layers/MulValueLayer.h 已删除 100644 → 0
浏览文件 @ 07f3f07f
/* Copyright (c) 2016 PaddlePaddle Authors. All Rights Reserve.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License. */
#pragma once
#include "Layer.h"
namespace paddle {
/**
* \brief For each instance, this layer can be used to multiply a value to a
* specified sub continuous region. By providing start index and end
* index for C/H/W, you can specify the location and shape of the
* region.
*
* input_0: Input value.
* input_1: Indices value to specify the location an shape of the
* region.
*/
class MulValueLayer : public Layer {
public:
explicit MulValueLayer(const LayerConfig& config) : Layer(config) {}
~MulValueLayer() {}
bool init(const LayerMap& layerMap, const ParameterMap& parameterMap);
void forward(PassType passType);
void backward(const UpdateCallback& callback = nullptr);
protected:
TensorShape shape_;
TensorShape indicesShape_;
size_t imgH_;
size_t imgW_;
size_t channelsNum_;
real value_;
};
} // namespace paddle
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或