//***************************************************************************** // // hw_pwm.h - Defines and Macros for Pulse Width Modulation (PWM) ports // // Copyright (c) 2005-2009 Luminary Micro, Inc. All rights reserved. // Software License Agreement // // Luminary Micro, Inc. (LMI) is supplying this software for use solely and // exclusively on LMI's microcontroller products. // // The software is owned by LMI and/or its suppliers, and is protected under // applicable copyright laws. All rights are reserved. You may not combine // this software with "viral" open-source software in order to form a larger // program. Any use in violation of the foregoing restrictions may subject // the user to criminal sanctions under applicable laws, as well as to civil // liability for the breach of the terms and conditions of this license. // // THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED // OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF // MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. // LMI SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR // CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. // // This is part of revision 4694 of the Stellaris Firmware Development Package. // //***************************************************************************** #ifndef __HW_PWM_H__ #define __HW_PWM_H__ //***************************************************************************** // // The following are defines for the PWM Module Register offsets. // //***************************************************************************** #define PWM_O_CTL 0x00000000 // PWM Master Control register #define PWM_O_SYNC 0x00000004 // PWM Time Base Sync register #define PWM_O_ENABLE 0x00000008 // PWM Output Enable register #define PWM_O_INVERT 0x0000000C // PWM Output Inversion register #define PWM_O_FAULT 0x00000010 // PWM Output Fault register #define PWM_O_INTEN 0x00000014 // PWM Interrupt Enable register #define PWM_O_RIS 0x00000018 // PWM Interrupt Raw Status reg. #define PWM_O_ISC 0x0000001C // PWM Interrupt Status register #define PWM_O_STATUS 0x00000020 // PWM Status register #define PWM_O_FAULTVAL 0x00000024 // PWM Fault Condition Value #define PWM_O_0_CTL 0x00000040 // PWM0 Control #define PWM_O_0_INTEN 0x00000044 // PWM0 Interrupt and Trigger // Enable #define PWM_O_0_RIS 0x00000048 // PWM0 Raw Interrupt Status #define PWM_O_0_ISC 0x0000004C // PWM0 Interrupt Status and Clear #define PWM_O_0_LOAD 0x00000050 // PWM0 Load #define PWM_O_0_COUNT 0x00000054 // PWM0 Counter #define PWM_O_0_CMPA 0x00000058 // PWM0 Compare A #define PWM_O_0_CMPB 0x0000005C // PWM0 Compare B #define PWM_O_0_GENA 0x00000060 // PWM0 Generator A Control #define PWM_O_0_GENB 0x00000064 // PWM0 Generator B Control #define PWM_O_0_DBCTL 0x00000068 // PWM0 Dead-Band Control #define PWM_O_0_DBRISE 0x0000006C // PWM0 Dead-Band Rising-Edge Delay #define PWM_O_0_DBFALL 0x00000070 // PWM0 Dead-Band // Falling-Edge-Delay #define PWM_O_0_FLTSRC0 0x00000074 // PWM0 Fault Source 0 #define PWM_O_0_FLTSRC1 0x00000078 // PWM0 Fault Source 1 #define PWM_O_0_MINFLTPER 0x0000007C // PWM0 Minimum Fault Period #define PWM_O_1_CTL 0x00000080 // PWM1 Control #define PWM_O_1_INTEN 0x00000084 // PWM1 Interrupt Enable #define PWM_O_1_RIS 0x00000088 // PWM1 Raw Interrupt Status #define PWM_O_1_ISC 0x0000008C // PWM1 Interrupt Status and Clear #define PWM_O_1_LOAD 0x00000090 // PWM1 Load #define PWM_O_1_COUNT 0x00000094 // PWM1 Counter #define PWM_O_1_CMPA 0x00000098 // PWM1 Compare A #define PWM_O_1_CMPB 0x0000009C // PWM1 Compare B #define PWM_O_1_GENA 0x000000A0 // PWM1 Generator A Control #define PWM_O_1_GENB 0x000000A4 // PWM1 Generator B Control #define PWM_O_1_DBCTL 0x000000A8 // PWM1 Dead-Band Control #define PWM_O_1_DBRISE 0x000000AC // PWM1 Dead-Band Rising-Edge Delay #define PWM_O_1_DBFALL 0x000000B0 // PWM1 Dead-Band // Falling-Edge-Delay #define PWM_O_1_FLTSRC0 0x000000B4 // PWM1 Fault Source 0 #define PWM_O_1_FLTSRC1 0x000000B8 // PWM1 Fault Source 1 #define PWM_O_1_MINFLTPER 0x000000BC // PWM1 Minimum Fault Period #define PWM_O_2_CTL 0x000000C0 // PWM2 Control #define PWM_O_2_INTEN 0x000000C4 // PWM2 InterruptEnable #define PWM_O_2_RIS 0x000000C8 // PWM2 Raw Interrupt Status #define PWM_O_2_ISC 0x000000CC // PWM2 Interrupt Status and Clear #define PWM_O_2_LOAD 0x000000D0 // PWM2 Load #define PWM_O_2_COUNT 0x000000D4 // PWM2 Counter #define PWM_O_2_CMPA 0x000000D8 // PWM2 Compare A #define PWM_O_2_CMPB 0x000000DC // PWM2 Compare B #define PWM_O_2_GENA 0x000000E0 // PWM2 Generator A Control #define PWM_O_2_GENB 0x000000E4 // PWM2 Generator B Control #define PWM_O_2_DBCTL 0x000000E8 // PWM2 Dead-Band Control #define PWM_O_2_DBRISE 0x000000EC // PWM2 Dead-Band Rising-Edge Delay #define PWM_O_2_DBFALL 0x000000F0 // PWM2 Dead-Band // Falling-Edge-Delay #define PWM_O_2_FLTSRC0 0x000000F4 // PWM2 Fault Source 0 #define PWM_O_2_FLTSRC1 0x000000F8 // PWM2 Fault Source 1 #define PWM_O_2_MINFLTPER 0x000000FC // PWM2 Minimum Fault Period #define PWM_O_3_CTL 0x00000100 // PWM3 Control #define PWM_O_3_INTEN 0x00000104 // PWM3 Interrupt and Trigger // Enable #define PWM_O_3_RIS 0x00000108 // PWM3 Raw Interrupt Status #define PWM_O_3_ISC 0x0000010C // PWM3 Interrupt Status and Clear #define PWM_O_3_LOAD 0x00000110 // PWM3 Load #define PWM_O_3_COUNT 0x00000114 // PWM3 Counter #define PWM_O_3_CMPA 0x00000118 // PWM3 Compare A #define PWM_O_3_CMPB 0x0000011C // PWM3 Compare B #define PWM_O_3_GENA 0x00000120 // PWM3 Generator A Control #define PWM_O_3_GENB 0x00000124 // PWM3 Generator B Control #define PWM_O_3_DBCTL 0x00000128 // PWM3 Dead-Band Control #define PWM_O_3_DBRISE 0x0000012C // PWM3 Dead-Band Rising-Edge Delay #define PWM_O_3_DBFALL 0x00000130 // PWM3 Dead-Band // Falling-Edge-Delay #define PWM_O_3_FLTSRC0 0x00000134 // PWM3 Fault Source 0 #define PWM_O_3_FLTSRC1 0x00000138 // PWM3 Fault Source 1 #define PWM_O_3_MINFLTPER 0x0000013C // PWM3 Minimum Fault Period #define PWM_O_0_FLTSEN 0x00000800 // PWM0 Fault Pin Logic Sense #define PWM_O_0_FLTSTAT0 0x00000804 // PWM0 Fault Status 0 #define PWM_O_0_FLTSTAT1 0x00000808 // PWM0 Fault Status 1 #define PWM_O_1_FLTSEN 0x00000880 // PWM1 Fault Pin Logic Sense #define PWM_O_1_FLTSTAT0 0x00000884 // PWM1 Fault Status 0 #define PWM_O_1_FLTSTAT1 0x00000888 // PWM1 Fault Status 1 #define PWM_O_2_FLTSEN 0x00000900 // PWM2 Fault Pin Logic Sense #define PWM_O_2_FLTSTAT0 0x00000904 // PWM2 Fault Status 0 #define PWM_O_2_FLTSTAT1 0x00000908 // PWM2 Fault Status 1 #define PWM_O_3_FLTSEN 0x00000980 // PWM3 Fault Pin Logic Sense #define PWM_O_3_FLTSTAT0 0x00000984 // PWM3 Fault Status 0 #define PWM_O_3_FLTSTAT1 0x00000988 // PWM3 Fault Status 1 //***************************************************************************** // // The following are defines for the bit fields in the PWM Master Control // register. // //***************************************************************************** #define PWM_CTL_GLOBALSYNC3 0x00000008 // Update PWM Generator 3. #define PWM_CTL_GLOBALSYNC2 0x00000004 // Update PWM Generator 2. #define PWM_CTL_GLOBALSYNC1 0x00000002 // Update PWM Generator 1. #define PWM_CTL_GLOBALSYNC0 0x00000001 // Update PWM Generator 0. //***************************************************************************** // // The following are defines for the bit fields in the PWM Time Base Sync // register. // //***************************************************************************** #define PWM_SYNC_SYNC3 0x00000008 // Reset generator 3 counter #define PWM_SYNC_SYNC2 0x00000004 // Reset generator 2 counter #define PWM_SYNC_SYNC1 0x00000002 // Reset generator 1 counter #define PWM_SYNC_SYNC0 0x00000001 // Reset generator 0 counter //***************************************************************************** // // The following are defines for the bit fields in the PWM Output Enable // register. // //***************************************************************************** #define PWM_ENABLE_PWM7EN 0x00000080 // PWM7 pin enable #define PWM_ENABLE_PWM6EN 0x00000040 // PWM6 pin enable #define PWM_ENABLE_PWM5EN 0x00000020 // PWM5 pin enable #define PWM_ENABLE_PWM4EN 0x00000010 // PWM4 pin enable #define PWM_ENABLE_PWM3EN 0x00000008 // PWM3 pin enable #define PWM_ENABLE_PWM2EN 0x00000004 // PWM2 pin enable #define PWM_ENABLE_PWM1EN 0x00000002 // PWM1 pin enable #define PWM_ENABLE_PWM0EN 0x00000001 // PWM0 pin enable //***************************************************************************** // // The following are defines for the bit fields in the PWM Inversion register. // //***************************************************************************** #define PWM_INVERT_PWM7INV 0x00000080 // PWM7 pin invert #define PWM_INVERT_PWM6INV 0x00000040 // PWM6 pin invert #define PWM_INVERT_PWM5INV 0x00000020 // PWM5 pin invert #define PWM_INVERT_PWM4INV 0x00000010 // PWM4 pin invert #define PWM_INVERT_PWM3INV 0x00000008 // PWM3 pin invert #define PWM_INVERT_PWM2INV 0x00000004 // PWM2 pin invert #define PWM_INVERT_PWM1INV 0x00000002 // PWM1 pin invert #define PWM_INVERT_PWM0INV 0x00000001 // PWM0 pin invert //***************************************************************************** // // The following are defines for the bit fields in the PWM Fault register. // //***************************************************************************** #define PWM_FAULT_FAULT7 0x00000080 // PWM7 pin fault #define PWM_FAULT_FAULT6 0x00000040 // PWM6 pin fault #define PWM_FAULT_FAULT5 0x00000020 // PWM5 pin fault #define PWM_FAULT_FAULT4 0x00000010 // PWM4 pin fault #define PWM_FAULT_FAULT3 0x00000008 // PWM3 pin fault #define PWM_FAULT_FAULT2 0x00000004 // PWM2 pin fault #define PWM_FAULT_FAULT1 0x00000002 // PWM1 pin fault #define PWM_FAULT_FAULT0 0x00000001 // PWM0 pin fault //***************************************************************************** // // The following are defines for the bit fields in the PWM Status register. // //***************************************************************************** #define PWM_STATUS_FAULT3 0x00000008 // Fault3 Interrupt Status. #define PWM_STATUS_FAULT2 0x00000004 // Fault2 Interrupt Status. #define PWM_STATUS_FAULT1 0x00000002 // Fault1 Interrupt Status. #define PWM_STATUS_FAULT0 0x00000001 // Fault0 Interrupt Status. //***************************************************************************** // // The following are defines for the PWM Generator standard offsets. // //***************************************************************************** #define PWM_O_X_CTL 0x00000000 // Gen Control Reg #define PWM_O_X_INTEN 0x00000004 // Gen Int/Trig Enable Reg #define PWM_O_X_RIS 0x00000008 // Gen Raw Int Status Reg #define PWM_O_X_ISC 0x0000000C // Gen Int Status Reg #define PWM_O_X_LOAD 0x00000010 // Gen Load Reg #define PWM_O_X_COUNT 0x00000014 // Gen Counter Reg #define PWM_O_X_CMPA 0x00000018 // Gen Compare A Reg #define PWM_O_X_CMPB 0x0000001C // Gen Compare B Reg #define PWM_O_X_GENA 0x00000020 // Gen Generator A Ctrl Reg #define PWM_O_X_GENB 0x00000024 // Gen Generator B Ctrl Reg #define PWM_O_X_DBCTL 0x00000028 // Gen Dead Band Ctrl Reg #define PWM_O_X_DBRISE 0x0000002C // Gen DB Rising Edge Delay Reg #define PWM_O_X_DBFALL 0x00000030 // Gen DB Falling Edge Delay Reg #define PWM_O_X_FLTSRC0 0x00000034 // Fault pin, comparator condition #define PWM_O_X_FLTSRC1 0x00000038 // Digital comparator condition #define PWM_O_X_MINFLTPER 0x0000003C // Fault minimum period extension #define PWM_GEN_0_OFFSET 0x00000040 // PWM0 base #define PWM_GEN_1_OFFSET 0x00000080 // PWM1 base #define PWM_GEN_2_OFFSET 0x000000C0 // PWM2 base #define PWM_GEN_3_OFFSET 0x00000100 // PWM3 base //***************************************************************************** // // The following are defines for the PWM_X Control Register bit definitions. // //***************************************************************************** #define PWM_X_CTL_LATCH 0x00040000 // Latch Fault Input. #define PWM_X_CTL_MINFLTPER 0x00020000 // Minimum fault period enabled #define PWM_X_CTL_FLTSRC 0x00010000 // Fault Condition Source. #define PWM_X_CTL_DBFALLUPD_M 0x0000C000 // Specifies the update mode for // the PWMnDBFALL register. #define PWM_X_CTL_DBFALLUPD_I 0x00000000 // Immediate #define PWM_X_CTL_DBFALLUPD_LS 0x00008000 // Locally Synchronized #define PWM_X_CTL_DBFALLUPD_GS 0x0000C000 // Globally Synchronized #define PWM_X_CTL_DBRISEUPD_M 0x00003000 // PWMnDBRISE Update Mode. #define PWM_X_CTL_DBRISEUPD_I 0x00000000 // Immediate #define PWM_X_CTL_DBRISEUPD_LS 0x00002000 // Locally Synchronized #define PWM_X_CTL_DBRISEUPD_GS 0x00003000 // Globally Synchronized #define PWM_X_CTL_DBCTLUPD_M 0x00000C00 // PWMnDBCTL Update Mode. #define PWM_X_CTL_DBCTLUPD_I 0x00000000 // Immediate #define PWM_X_CTL_DBCTLUPD_LS 0x00000800 // Locally Synchronized #define PWM_X_CTL_DBCTLUPD_GS 0x00000C00 // Globally Synchronized #define PWM_X_CTL_GENBUPD_M 0x00000300 // PWMnGENB Update Mode. #define PWM_X_CTL_GENBUPD_I 0x00000000 // Immediate #define PWM_X_CTL_GENBUPD_LS 0x00000200 // Locally Synchronized #define PWM_X_CTL_GENBUPD_GS 0x00000300 // Globally Synchronized #define PWM_X_CTL_GENAUPD_M 0x000000C0 // PWMnGENA Update Mode. #define PWM_X_CTL_GENAUPD_I 0x00000000 // Immediate #define PWM_X_CTL_GENAUPD_LS 0x00000080 // Locally Synchronized #define PWM_X_CTL_GENAUPD_GS 0x000000C0 // Globally Synchronized #define PWM_X_CTL_CMPBUPD 0x00000020 // Update mode for comp B reg #define PWM_X_CTL_CMPAUPD 0x00000010 // Update mode for comp A reg #define PWM_X_CTL_LOADUPD 0x00000008 // Update mode for the load reg #define PWM_X_CTL_DEBUG 0x00000004 // Debug mode #define PWM_X_CTL_MODE 0x00000002 // Counter mode, down or up/down #define PWM_X_CTL_ENABLE 0x00000001 // Master enable for gen block //***************************************************************************** // // The following are defines for the PWM Generator extended offsets. // //***************************************************************************** #define PWM_O_X_FLTSEN 0x00000000 // Fault logic sense #define PWM_O_X_FLTSTAT0 0x00000004 // Pin and comparator status #define PWM_O_X_FLTSTAT1 0x00000008 // Digital comparator status #define PWM_EXT_0_OFFSET 0x00000800 // PWM0 extended base #define PWM_EXT_1_OFFSET 0x00000880 // PWM1 extended base #define PWM_EXT_2_OFFSET 0x00000900 // PWM2 extended base #define PWM_EXT_3_OFFSET 0x00000980 // PWM3 extended base //***************************************************************************** // // The following are defines for the PWM_X Interrupt/Trigger Enable Register // bit definitions. // //***************************************************************************** #define PWM_X_INTEN_TRCMPBD 0x00002000 // Trig if COUNT = CMPB D #define PWM_X_INTEN_TRCMPBU 0x00001000 // Trig if COUNT = CMPB U #define PWM_X_INTEN_TRCMPAD 0x00000800 // Trig if COUNT = CMPA D #define PWM_X_INTEN_TRCMPAU 0x00000400 // Trig if COUNT = CMPA U #define PWM_X_INTEN_TRCNTLOAD 0x00000200 // Trig if COUNT = LOAD #define PWM_X_INTEN_TRCNTZERO 0x00000100 // Trig if COUNT = 0 #define PWM_X_INTEN_INTCMPBD 0x00000020 // Int if COUNT = CMPA D #define PWM_X_INTEN_INTCMPBU 0x00000010 // Int if COUNT = CMPA U #define PWM_X_INTEN_INTCMPAD 0x00000008 // Int if COUNT = CMPA D #define PWM_X_INTEN_INTCMPAU 0x00000004 // Int if COUNT = CMPA U #define PWM_X_INTEN_INTCNTLOAD 0x00000002 // Int if COUNT = LOAD #define PWM_X_INTEN_INTCNTZERO 0x00000001 // Int if COUNT = 0 //***************************************************************************** // // The following are defines for the PWM_X Raw Interrupt Status Register bit // definitions. // //***************************************************************************** #define PWM_X_RIS_INTCMPBD 0x00000020 // PWM_X_COUNT = PWM_X_CMPB D int #define PWM_X_RIS_INTCMPBU 0x00000010 // PWM_X_COUNT = PWM_X_CMPB U int #define PWM_X_RIS_INTCMPAD 0x00000008 // PWM_X_COUNT = PWM_X_CMPA D int #define PWM_X_RIS_INTCMPAU 0x00000004 // PWM_X_COUNT = PWM_X_CMPA U int #define PWM_X_RIS_INTCNTLOAD 0x00000002 // PWM_X_COUNT = PWM_X_LOAD int #define PWM_X_RIS_INTCNTZERO 0x00000001 // PWM_X_COUNT = 0 int //***************************************************************************** // // The following are defines for the bit fields in the PWM_O_INTEN register. // //***************************************************************************** #define PWM_INTEN_INTFAULT3 0x00080000 // Interrupt Fault 3. #define PWM_INTEN_INTFAULT2 0x00040000 // Interrupt Fault 2. #define PWM_INTEN_INTFAULT1 0x00020000 // Interrupt Fault 1. #define PWM_INTEN_INTFAULT 0x00010000 // Fault Interrupt Enable. #define PWM_INTEN_INTFAULT0 0x00010000 // Interrupt Fault 0. #define PWM_INTEN_INTPWM3 0x00000008 // PWM3 Interrupt Enable. #define PWM_INTEN_INTPWM2 0x00000004 // PWM2 Interrupt Enable. #define PWM_INTEN_INTPWM1 0x00000002 // PWM1 Interrupt Enable. #define PWM_INTEN_INTPWM0 0x00000001 // PWM0 Interrupt Enable. //***************************************************************************** // // The following are defines for the bit fields in the PWM_O_RIS register. // //***************************************************************************** #define PWM_RIS_INTFAULT3 0x00080000 // Interrupt Fault PWM 3. #define PWM_RIS_INTFAULT2 0x00040000 // Interrupt Fault PWM 2. #define PWM_RIS_INTFAULT1 0x00020000 // Interrupt Fault PWM 1. #define PWM_RIS_INTFAULT0 0x00010000 // Interrupt Fault PWM 0. #define PWM_RIS_INTFAULT 0x00010000 // Fault Interrupt Asserted. #define PWM_RIS_INTPWM3 0x00000008 // PWM3 Interrupt Asserted. #define PWM_RIS_INTPWM2 0x00000004 // PWM2 Interrupt Asserted. #define PWM_RIS_INTPWM1 0x00000002 // PWM1 Interrupt Asserted. #define PWM_RIS_INTPWM0 0x00000001 // PWM0 Interrupt Asserted. //***************************************************************************** // // The following are defines for the bit fields in the PWM_O_ISC register. // //***************************************************************************** #define PWM_ISC_INTFAULT3 0x00080000 // FAULT3 Interrupt Asserted. #define PWM_ISC_INTFAULT2 0x00040000 // FAULT2 Interrupt Asserted. #define PWM_ISC_INTFAULT1 0x00020000 // FAULT1 Interrupt Asserted. #define PWM_ISC_INTFAULT 0x00010000 // Fault Interrupt Asserted. #define PWM_ISC_INTFAULT0 0x00010000 // FAULT0 Interrupt Asserted. #define PWM_ISC_INTPWM3 0x00000008 // PWM3 Interrupt Status. #define PWM_ISC_INTPWM2 0x00000004 // PWM2 Interrupt Status. #define PWM_ISC_INTPWM1 0x00000002 // PWM1 Interrupt Status. #define PWM_ISC_INTPWM0 0x00000001 // PWM0 Interrupt Status. //***************************************************************************** // // The following are defines for the bit fields in the PWM_O_X_ISC register. // //***************************************************************************** #define PWM_X_ISC_INTCMPBD 0x00000020 // Comparator B Down Interrupt. #define PWM_X_ISC_INTCMPBU 0x00000010 // Comparator B Up Interrupt. #define PWM_X_ISC_INTCMPAD 0x00000008 // Comparator A Down Interrupt. #define PWM_X_ISC_INTCMPAU 0x00000004 // Comparator A Up Interrupt. #define PWM_X_ISC_INTCNTLOAD 0x00000002 // Counter=Load Interrupt. #define PWM_X_ISC_INTCNTZERO 0x00000001 // Counter=0 Interrupt. //***************************************************************************** // // The following are defines for the bit fields in the PWM_O_X_LOAD register. // //***************************************************************************** #define PWM_X_LOAD_M 0x0000FFFF // Counter Load Value. #define PWM_X_LOAD_S 0 //***************************************************************************** // // The following are defines for the bit fields in the PWM_O_X_COUNT register. // //***************************************************************************** #define PWM_X_COUNT_M 0x0000FFFF // Counter Value. #define PWM_X_COUNT_S 0 //***************************************************************************** // // The following are defines for the bit fields in the PWM_O_X_CMPA register. // //***************************************************************************** #define PWM_X_CMPA_M 0x0000FFFF // Comparator A Value. #define PWM_X_CMPA_S 0 //***************************************************************************** // // The following are defines for the bit fields in the PWM_O_X_CMPB register. // //***************************************************************************** #define PWM_X_CMPB_M 0x0000FFFF // Comparator B Value. #define PWM_X_CMPB_S 0 //***************************************************************************** // // The following are defines for the bit fields in the PWM_O_X_GENA register. // //***************************************************************************** #define PWM_X_GENA_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down. #define PWM_X_GENA_ACTCMPBD_NONE \ 0x00000000 // Do nothing. #define PWM_X_GENA_ACTCMPBD_INV 0x00000400 // Invert the output signal. #define PWM_X_GENA_ACTCMPBD_ZERO \ 0x00000800 // Set the output signal to 0. #define PWM_X_GENA_ACTCMPBD_ONE 0x00000C00 // Set the output signal to 1. #define PWM_X_GENA_ACTCMPBU_M 0x00000300 // Action for Comparator B Up. #define PWM_X_GENA_ACTCMPBU_NONE \ 0x00000000 // Do nothing. #define PWM_X_GENA_ACTCMPBU_INV 0x00000100 // Invert the output signal. #define PWM_X_GENA_ACTCMPBU_ZERO \ 0x00000200 // Set the output signal to 0. #define PWM_X_GENA_ACTCMPBU_ONE 0x00000300 // Set the output signal to 1. #define PWM_X_GENA_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down. #define PWM_X_GENA_ACTCMPAD_NONE \ 0x00000000 // Do nothing. #define PWM_X_GENA_ACTCMPAD_INV 0x00000040 // Invert the output signal. #define PWM_X_GENA_ACTCMPAD_ZERO \ 0x00000080 // Set the output signal to 0. #define PWM_X_GENA_ACTCMPAD_ONE 0x000000C0 // Set the output signal to 1. #define PWM_X_GENA_ACTCMPAU_M 0x00000030 // Action for Comparator A Up. #define PWM_X_GENA_ACTCMPAU_NONE \ 0x00000000 // Do nothing. #define PWM_X_GENA_ACTCMPAU_INV 0x00000010 // Invert the output signal. #define PWM_X_GENA_ACTCMPAU_ZERO \ 0x00000020 // Set the output signal to 0. #define PWM_X_GENA_ACTCMPAU_ONE 0x00000030 // Set the output signal to 1. #define PWM_X_GENA_ACTLOAD_M 0x0000000C // Action for Counter=Load. #define PWM_X_GENA_ACTLOAD_NONE 0x00000000 // Do nothing. #define PWM_X_GENA_ACTLOAD_INV 0x00000004 // Invert the output signal. #define PWM_X_GENA_ACTLOAD_ZERO 0x00000008 // Set the output signal to 0. #define PWM_X_GENA_ACTLOAD_ONE 0x0000000C // Set the output signal to 1. #define PWM_X_GENA_ACTZERO_M 0x00000003 // Action for Counter=0. #define PWM_X_GENA_ACTZERO_NONE 0x00000000 // Do nothing. #define PWM_X_GENA_ACTZERO_INV 0x00000001 // Invert the output signal. #define PWM_X_GENA_ACTZERO_ZERO 0x00000002 // Set the output signal to 0. #define PWM_X_GENA_ACTZERO_ONE 0x00000003 // Set the output signal to 1. //***************************************************************************** // // The following are defines for the bit fields in the PWM_O_X_GENB register. // //***************************************************************************** #define PWM_X_GENB_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down. #define PWM_X_GENB_ACTCMPBD_NONE \ 0x00000000 // Do nothing. #define PWM_X_GENB_ACTCMPBD_INV 0x00000400 // Invert the output signal. #define PWM_X_GENB_ACTCMPBD_ZERO \ 0x00000800 // Set the output signal to 0. #define PWM_X_GENB_ACTCMPBD_ONE 0x00000C00 // Set the output signal to 1. #define PWM_X_GENB_ACTCMPBU_M 0x00000300 // Action for Comparator B Up. #define PWM_X_GENB_ACTCMPBU_NONE \ 0x00000000 // Do nothing. #define PWM_X_GENB_ACTCMPBU_INV 0x00000100 // Invert the output signal. #define PWM_X_GENB_ACTCMPBU_ZERO \ 0x00000200 // Set the output signal to 0. #define PWM_X_GENB_ACTCMPBU_ONE 0x00000300 // Set the output signal to 1. #define PWM_X_GENB_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down. #define PWM_X_GENB_ACTCMPAD_NONE \ 0x00000000 // Do nothing. #define PWM_X_GENB_ACTCMPAD_INV 0x00000040 // Invert the output signal. #define PWM_X_GENB_ACTCMPAD_ZERO \ 0x00000080 // Set the output signal to 0. #define PWM_X_GENB_ACTCMPAD_ONE 0x000000C0 // Set the output signal to 1. #define PWM_X_GENB_ACTCMPAU_M 0x00000030 // Action for Comparator A Up. #define PWM_X_GENB_ACTCMPAU_NONE \ 0x00000000 // Do nothing. #define PWM_X_GENB_ACTCMPAU_INV 0x00000010 // Invert the output signal. #define PWM_X_GENB_ACTCMPAU_ZERO \ 0x00000020 // Set the output signal to 0. #define PWM_X_GENB_ACTCMPAU_ONE 0x00000030 // Set the output signal to 1. #define PWM_X_GENB_ACTLOAD_M 0x0000000C // Action for Counter=Load. #define PWM_X_GENB_ACTLOAD_NONE 0x00000000 // Do nothing. #define PWM_X_GENB_ACTLOAD_INV 0x00000004 // Invert the output signal. #define PWM_X_GENB_ACTLOAD_ZERO 0x00000008 // Set the output signal to 0. #define PWM_X_GENB_ACTLOAD_ONE 0x0000000C // Set the output signal to 1. #define PWM_X_GENB_ACTZERO_M 0x00000003 // Action for Counter=0. #define PWM_X_GENB_ACTZERO_NONE 0x00000000 // Do nothing. #define PWM_X_GENB_ACTZERO_INV 0x00000001 // Invert the output signal. #define PWM_X_GENB_ACTZERO_ZERO 0x00000002 // Set the output signal to 0. #define PWM_X_GENB_ACTZERO_ONE 0x00000003 // Set the output signal to 1. //***************************************************************************** // // The following are defines for the bit fields in the PWM_O_X_DBCTL register. // //***************************************************************************** #define PWM_X_DBCTL_ENABLE 0x00000001 // Dead-Band Generator Enable. //***************************************************************************** // // The following are defines for the bit fields in the PWM_O_X_DBRISE register. // //***************************************************************************** #define PWM_X_DBRISE_DELAY_M 0x00000FFF // Dead-Band Rise Delay. #define PWM_X_DBRISE_DELAY_S 0 //***************************************************************************** // // The following are defines for the bit fields in the PWM_O_X_DBFALL register. // //***************************************************************************** #define PWM_X_DBFALL_DELAY_M 0x00000FFF // Dead-Band Fall Delay. #define PWM_X_DBFALL_DELAY_S 0 //***************************************************************************** // // The following are defines for the bit fields in the PWM_O_FAULTVAL register. // //***************************************************************************** #define PWM_FAULTVAL_PWM7 0x00000080 // PWM7 Fault Value. #define PWM_FAULTVAL_PWM6 0x00000040 // PWM6 Fault Value. #define PWM_FAULTVAL_PWM5 0x00000020 // PWM5 Fault Value. #define PWM_FAULTVAL_PWM4 0x00000010 // PWM4 Fault Value. #define PWM_FAULTVAL_PWM3 0x00000008 // PWM3 Fault Value. #define PWM_FAULTVAL_PWM2 0x00000004 // PWM2 Fault Value. #define PWM_FAULTVAL_PWM1 0x00000002 // PWM1 Fault Value. #define PWM_FAULTVAL_PWM0 0x00000001 // PWM0 Fault Value. //***************************************************************************** // // The following are defines for the bit fields in the PWM_O_X_MINFLTPER // register. // //***************************************************************************** #define PWM_X_MINFLTPER_M 0x0000FFFF // Minimum Fault Period. #define PWM_X_MINFLTPER_S 0 //***************************************************************************** // // The following are defines for the bit fields in the PWM_O_X_FLTSEN register. // //***************************************************************************** #define PWM_X_FLTSEN_FAULT3 0x00000008 // Fault3 Sense. #define PWM_X_FLTSEN_FAULT2 0x00000004 // Fault2 Sense. #define PWM_X_FLTSEN_FAULT1 0x00000002 // Fault1 Sense. #define PWM_X_FLTSEN_FAULT0 0x00000001 // Fault0 Sense. //***************************************************************************** // // The following are defines for the bit fields in the PWM_O_X_FLTSRC0 // register. // //***************************************************************************** #define PWM_X_FLTSRC0_FAULT3 0x00000008 // Fault3. #define PWM_X_FLTSRC0_FAULT2 0x00000004 // Fault2. #define PWM_X_FLTSRC0_FAULT1 0x00000002 // Fault1. #define PWM_X_FLTSRC0_FAULT0 0x00000001 // Fault0. //***************************************************************************** // // The following are defines for the bit fields in the PWM_O_X_FLTSTAT0 // register. // //***************************************************************************** #define PWM_X_FLTSTAT0_FAULT3 0x00000008 // Fault Input 3. #define PWM_X_FLTSTAT0_FAULT2 0x00000004 // Fault Input 2. #define PWM_X_FLTSTAT0_FAULT1 0x00000002 // Fault Input 1. #define PWM_X_FLTSTAT0_FAULT0 0x00000001 // Fault Input 0. //***************************************************************************** // // The following are defines for the bit fields in the PWM_O_X_FLTSRC1 // register. // //***************************************************************************** #define PWM_X_FLTSRC1_DCMP7 0x00000080 // Digital Comparator 7. #define PWM_X_FLTSRC1_DCMP6 0x00000040 // Digital Comparator 6. #define PWM_X_FLTSRC1_DCMP5 0x00000020 // Digital Comparator 5. #define PWM_X_FLTSRC1_DCMP4 0x00000010 // Digital Comparator 4. #define PWM_X_FLTSRC1_DCMP3 0x00000008 // Digital Comparator 3. #define PWM_X_FLTSRC1_DCMP2 0x00000004 // Digital Comparator 2. #define PWM_X_FLTSRC1_DCMP1 0x00000002 // Digital Comparator 1. #define PWM_X_FLTSRC1_DCMP0 0x00000001 // Digital Comparator 0. //***************************************************************************** // // The following are defines for the bit fields in the PWM_O_X_FLTSTAT1 // register. // //***************************************************************************** #define PWM_X_FLTSTAT1_DCMP7 0x00000080 // Digital Comparator 7 Trigger. #define PWM_X_FLTSTAT1_DCMP6 0x00000040 // Digital Comparator 6 Trigger. #define PWM_X_FLTSTAT1_DCMP5 0x00000020 // Digital Comparator 5 Trigger. #define PWM_X_FLTSTAT1_DCMP4 0x00000010 // Digital Comparator 4 Trigger. #define PWM_X_FLTSTAT1_DCMP3 0x00000008 // Digital Comparator 3 Trigger. #define PWM_X_FLTSTAT1_DCMP2 0x00000004 // Digital Comparator 2 Trigger. #define PWM_X_FLTSTAT1_DCMP1 0x00000002 // Digital Comparator 1 Trigger. #define PWM_X_FLTSTAT1_DCMP0 0x00000001 // Digital Comparator 0 Trigger. //***************************************************************************** // // The following definitions are deprecated. // //***************************************************************************** #ifndef DEPRECATED //***************************************************************************** // // The following are deprecated defines for the bit fields in the PWM Master // Control register. // //***************************************************************************** #define PWM_CTL_GLOBAL_SYNC2 0x00000004 // Global sync generator 2 #define PWM_CTL_GLOBAL_SYNC1 0x00000002 // Global sync generator 1 #define PWM_CTL_GLOBAL_SYNC0 0x00000001 // Global sync generator 0 //***************************************************************************** // // The following are deprecated defines for the PWM Interrupt Register bit // definitions. // //***************************************************************************** #define PWM_INT_INTFAULT 0x00010000 // Fault interrupt pending //***************************************************************************** // // The following are deprecated defines for the bit fields in the PWM Status // register. // //***************************************************************************** #define PWM_STATUS_FAULT 0x00000001 // Fault status //***************************************************************************** // // The following are deprecated defines for the PWM_X Interrupt Status Register // bit definitions. // //***************************************************************************** #define PWM_X_INT_INTCMPBD 0x00000020 // PWM_X_COUNT = PWM_X_CMPB D rcvd #define PWM_X_INT_INTCMPBU 0x00000010 // PWM_X_COUNT = PWM_X_CMPB U rcvd #define PWM_X_INT_INTCMPAD 0x00000008 // PWM_X_COUNT = PWM_X_CMPA D rcvd #define PWM_X_INT_INTCMPAU 0x00000004 // PWM_X_COUNT = PWM_X_CMPA U rcvd #define PWM_X_INT_INTCNTLOAD 0x00000002 // PWM_X_COUNT = PWM_X_LOAD rcvd #define PWM_X_INT_INTCNTZERO 0x00000001 // PWM_X_COUNT = 0 received //***************************************************************************** // // The following are deprecated defines for the PWM_X Generator A/B Control // Register bit definitions. // //***************************************************************************** #define PWM_X_GEN_Y_ACTCMPBD 0x00000C00 // Act PWM_X_COUNT = PWM_X_CMPB D #define PWM_X_GEN_Y_ACTCMPBU 0x00000300 // Act PWM_X_COUNT = PWM_X_CMPB U #define PWM_X_GEN_Y_ACTCMPAD 0x000000C0 // Act PWM_X_COUNT = PWM_X_CMPA D #define PWM_X_GEN_Y_ACTCMPAU 0x00000030 // Act PWM_X_COUNT = PWM_X_CMPA U #define PWM_X_GEN_Y_ACTLOAD 0x0000000C // Act PWM_X_COUNT = PWM_X_LOAD #define PWM_X_GEN_Y_ACTZERO 0x00000003 // Act PWM_X_COUNT = 0 //***************************************************************************** // // The following are deprecated defines for the PWM_X Generator A/B Control // Register action definitions. // //***************************************************************************** #define PWM_GEN_ACT_ONE 0x00000003 // Set the output signal to one #define PWM_GEN_ACT_ZERO 0x00000002 // Set the output signal to zero #define PWM_GEN_ACT_INV 0x00000001 // Invert the output signal #define PWM_GEN_ACT_NONE 0x00000000 // Do nothing #define PWM_GEN_ACT_B_DN_SHIFT 10 // Shift amount for the B dn action #define PWM_GEN_ACT_B_UP_SHIFT 8 // Shift amount for the B up action #define PWM_GEN_ACT_A_DN_SHIFT 6 // Shift amount for the A dn action #define PWM_GEN_ACT_A_UP_SHIFT 4 // Shift amount for the A up action #define PWM_GEN_ACT_LOAD_SHIFT 2 // Shift amount for the load action #define PWM_GEN_ACT_ZERO_SHIFT 0 // Shift amount for the zero action //***************************************************************************** // // The following are deprecated defines for the PWM_X Dead Band Control // Register bit definitions. // //***************************************************************************** #define PWM_DBCTL_ENABLE 0x00000001 // Enable dead band insertion //***************************************************************************** // // The following are deprecated defines for the PWM Register reset values. // //***************************************************************************** #define PWM_RV_X_DBCTL 0x00000000 // Control the dead band generator #define PWM_RV_STATUS 0x00000000 // Status #define PWM_RV_X_ISC 0x00000000 // Interrupt status and clearing #define PWM_RV_X_RIS 0x00000000 // Raw interrupt status #define PWM_RV_X_CTL 0x00000000 // Master control of the PWM // generator block #define PWM_RV_SYNC 0x00000000 // Counter synch for PWM generators #define PWM_RV_X_DBFALL 0x00000000 // The dead band falling edge delay // count #define PWM_RV_X_INTEN 0x00000000 // Interrupt and trigger enable #define PWM_RV_X_LOAD 0x00000000 // The load value for the counter #define PWM_RV_X_GENA 0x00000000 // Controls PWM generator A #define PWM_RV_CTL 0x00000000 // Master control of the PWM module #define PWM_RV_FAULT 0x00000000 // Fault handling for the PWM // output pins #define PWM_RV_RIS 0x00000000 // Raw interrupt status #define PWM_RV_X_CMPA 0x00000000 // The comparator A value #define PWM_RV_INVERT 0x00000000 // Inversion control for PWM output // pins #define PWM_RV_X_DBRISE 0x00000000 // The dead band rising edge delay // count #define PWM_RV_ENABLE 0x00000000 // Master enable for the PWM output // pins #define PWM_RV_X_GENB 0x00000000 // Controls PWM generator B #define PWM_RV_X_CMPB 0x00000000 // The comparator B value #define PWM_RV_ISC 0x00000000 // Interrupt status and clearing #define PWM_RV_INTEN 0x00000000 // Interrupt enable #define PWM_RV_X_COUNT 0x00000000 // The current counter value #endif #endif // __HW_PWM_H__