/*
 * Copyright (c) 2006-2021, RT-Thread Development Team
 *
 * SPDX-License-Identifier: Apache-2.0
 *
 * Change Logs:
 * Date           Author            Notes
 * 2020-10-14     Dozingfiretruck   first version
 */

#include "board.h"

#ifdef BSP_USING_ON_CHIP_FLASH
#include "drv_config.h"
#include "drv_flash.h"

#if defined(PKG_USING_FAL)
#include "fal.h"
#endif

//#define DRV_DEBUG
#define LOG_TAG                "drv.flash"
#include <drv_log.h>

/**
  * @brief  Gets the page of a given address
  * @param  Addr: Address of the FLASH Memory
  * @retval The page of a given address
  */
static uint32_t GetPage(uint32_t addr)
{
    uint32_t page = 0;
    page = RT_ALIGN_DOWN(addr-STM32_FLASH_START_ADRESS, FLASH_PAGE_SIZE)/FLASH_PAGE_SIZE;
    return page;
}

/**
 * Read data from flash.
 * @note This operation's units is word.
 *
 * @param addr flash address
 * @param buf buffer to store read data
 * @param size read bytes size
 *
 * @return result
 */
int stm32_flash_read(rt_uint32_t addr, rt_uint8_t *buf, size_t size)
{
    size_t i;

    if ((addr + size) > STM32_FLASH_END_ADDRESS)
    {
        LOG_E("read outrange flash size! addr is (0x%p)", (void*)(addr + size));
        return -RT_EINVAL;
    }

    for (i = 0; i < size; i++, buf++, addr++)
    {
        *buf = *(rt_uint8_t *) addr;
    }

    return size;
}

/**
 * Write data to flash.
 * @note This operation's units is word.
 * @note This operation must after erase. @see flash_erase.
 *
 * @param addr flash address
 * @param buf the write data buffer
 * @param size write bytes size
 *
 * @return result
 */

int stm32_flash_write(rt_uint32_t addr, const uint8_t *buf, size_t size)
{
    size_t i, j;
    rt_err_t result = 0;
    rt_uint64_t write_data = 0, temp_data = 0;

    if ((addr + size) > STM32_FLASH_END_ADDRESS)
    {
        LOG_E("ERROR: write outrange flash size! addr is (0x%p)\n", (void*)(addr + size));
        return -RT_EINVAL;
    }

    if(addr % 8 != 0)
    {
        LOG_E("write addr must be 8-byte alignment");
        return -RT_EINVAL;
    }

    HAL_FLASH_Unlock();

    __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | FLASH_FLAG_PGSERR);

    if (size < 1)
    {
        return -RT_ERROR;
    }

    for (i = 0; i < size;)
    {
        if ((size - i) < 8)
        {
            for (j = 0; (size - i) > 0; i++, j++)
            {
                temp_data = *buf;
                write_data = (write_data) | (temp_data << 8 * j);
                buf ++;
            }
        }
        else
        {
            for (j = 0; j < 8; j++, i++)
            {
                temp_data = *buf;
                write_data = (write_data) | (temp_data << 8 * j);
                buf ++;
            }
        }

        /* write data */
        if (HAL_FLASH_Program(FLASH_TYPEPROGRAM_DOUBLEWORD, addr, write_data) == HAL_OK)
        {
            /* Check the written value */
            if (*(uint64_t*)addr != write_data)
            {
                LOG_E("ERROR: write data != read data\n");
                result = -RT_ERROR;
                goto __exit;
            }
        }
        else
        {
            result = -RT_ERROR;
            goto __exit;
        }

        temp_data = 0;
        write_data = 0;

        addr += 8;
    }

__exit:
    HAL_FLASH_Lock();
    if (result != 0)
    {
        return result;
    }

    return size;
}

/**
 * Erase data on flash.
 * @note This operation is irreversible.
 * @note This operation's units is different which on many chips.
 *
 * @param addr flash address
 * @param size erase bytes size
 *
 * @return result
 */
int stm32_flash_erase(rt_uint32_t addr, size_t size)
{
    rt_err_t result = RT_EOK;
    uint32_t PAGEError = 0;

    /*Variable used for Erase procedure*/
    FLASH_EraseInitTypeDef EraseInitStruct;

    if ((addr + size) > STM32_FLASH_END_ADDRESS)
    {
        LOG_E("ERROR: erase outrange flash size! addr is (0x%p)\n", (void *)(addr + size));
        return -RT_EINVAL;
    }

    HAL_FLASH_Unlock();

    /* Fill EraseInit structure*/
    EraseInitStruct.TypeErase   = FLASH_TYPEERASE_PAGES;
    EraseInitStruct.Page                = GetPage(addr);
    EraseInitStruct.NbPages     = (size + FLASH_PAGE_SIZE - 1) / FLASH_PAGE_SIZE;

    if (HAL_FLASHEx_Erase(&EraseInitStruct, &PAGEError) != HAL_OK)
    {
        result = -RT_ERROR;
        goto __exit;
    }

__exit:
    HAL_FLASH_Lock();

    if (result != RT_EOK)
    {
        return result;
    }

    LOG_D("erase done: addr (0x%p), size %d", (void*)addr, size);
    return size;
}

#if defined(PKG_USING_FAL)

static int fal_flash_read(long offset, rt_uint8_t *buf, size_t size);
static int fal_flash_write(long offset, const rt_uint8_t *buf, size_t size);
static int fal_flash_erase(long offset, size_t size);

const struct fal_flash_dev stm32_onchip_flash = { "onchip_flash", STM32_FLASH_START_ADRESS, STM32_FLASH_SIZE, FLASH_PAGE_SIZE, {NULL, fal_flash_read, fal_flash_write, fal_flash_erase} };

static int fal_flash_read(long offset, rt_uint8_t *buf, size_t size)
{
    return stm32_flash_read(stm32_onchip_flash.addr + offset, buf, size);
}

static int fal_flash_write(long offset, const rt_uint8_t *buf, size_t size)
{
    return stm32_flash_write(stm32_onchip_flash.addr + offset, buf, size);
}

static int fal_flash_erase(long offset, size_t size)
{
    return stm32_flash_erase(stm32_onchip_flash.addr + offset, size);
}

#endif
#endif /* BSP_USING_ON_CHIP_FLASH */