[bsp][stm32] Add stm32g431-st-necleo and stm32f429-st-disco to stm32/README.md

.travis.yml

@@ -91,6 +91,7 @@ env:
   - RTT_BSP='stm32/stm32f429-armfly-v6' RTT_TOOL_CHAIN='sourcery-arm'
   - RTT_BSP='stm32/stm32f429-atk-apollo' RTT_TOOL_CHAIN='sourcery-arm'
   - RTT_BSP='stm32/stm32f429-fire-challenger' RTT_TOOL_CHAIN='sourcery-arm'
+  - RTT_BSP='stm32/stm32f429-st-disco' RTT_TOOL_CHAIN='sourcery-arm'
   - RTT_BSP='stm32/stm32f446-st-nucleo' RTT_TOOL_CHAIN='sourcery-arm'
   - RTT_BSP='stm32/stm32f469-st-disco' RTT_TOOL_CHAIN='sourcery-arm'
   - RTT_BSP='stm32/stm32f746-st-disco' RTT_TOOL_CHAIN='sourcery-arm'

bsp/stm32/README.md

@@ -22,6 +22,7 @@ STM32 系列 BSP 目前支持情况如下表所示：
 | [stm32f407-atk-explorer](stm32f407-atk-explorer) | 正点原子 F407 探索者开发板 |
 | [stm32f411-st-nucleo](stm32f411-st-nucleo/) | ST 官方 STM32F411-Nucleo-64 开发板 |
 | [stm32f427-robomaster-a](stm32f427-robomaster-a/) |大疆公司 RoboMaster A型开发板|
+| [stm32f429-st-disco](stm32f429-st-disco) | ST 官方 STM32F429-discovery 开发板 |
 | [stm32f429-atk-apollo](stm32f429-atk-apollo)      | 正点原子 F429 阿波罗开发板 |
 | [stm32f429-fire-challenger](stm32f429-fire-challenger/) | 野火 F429 挑战者开发板 |
 | [stm32f429-armfly-v6](stm32f429-armfly-v6) | 安富莱 F429-v6 开发板 |
@@ -35,6 +36,8 @@ STM32 系列 BSP 目前支持情况如下表所示：
 | [stm32f769-st-disco](stm32f769-st-disco) | ST 官方 STM32f769-discovery 开发板 |
 | **G0 系列** |  |
 | [stm32g071-st-nucleo](stm32g071-st-nucleo) | ST 官方 STM32G071-nucleo 开发板 |
+| **G4 系列** |  |
+| [stm32g431-st-nucleo](stm32g431-st-nucleo) | ST 官方 STM32G431-nucleo 开发板 |
 | **H7 系列** |  |
 | [stm32h743-atk-apollo](stm32h743-atk-apollo) | 正点原子 h743 阿波罗开发板 |
 | [stm32h743-st-nucleo](stm32h743-st-nucleo) | ST 官方 STM32H743-nucleo 开发板 |

bsp/stm32/stm32f429-st-disco/.config

@@ -393,14 +393,6 @@ CONFIG_SOC_SERIES_STM32F4=y
 #
 CONFIG_SOC_STM32F429ZI=y
 
-#
-# Onboard Peripheral Drivers
-#
-# CONFIG_BSP_USING_SDRAM is not set
-# CONFIG_BSP_USING_LCD_MIPI is not set
-# CONFIG_BSP_USING_LCD_OTM8009A is not set
-# CONFIG_BSP_USING_TOUCH is not set
-
 #
 # On-chip Peripheral Drivers
 #
@@ -411,9 +403,7 @@ CONFIG_BSP_USING_UART1=y
 # CONFIG_BSP_USING_I2C1 is not set
 # CONFIG_BSP_USING_SPI is not set
 # CONFIG_BSP_USING_QSPI is not set
-# CONFIG_BSP_USING_ON_CHIP_FLASH is not set
 # CONFIG_BSP_USING_FMC is not set
-# CONFIG_BSP_USING_SDIO is not set
 # CONFIG_BSP_USING_USBD_FS is not set
 # CONFIG_BSP_USING_LTDC is not set
 # CONFIG_BSP_USING_RNG is not set

bsp/stm32/stm32f429-st-disco/board/Kconfig

@@ -7,37 +7,6 @@ config SOC_STM32F429ZI
     select RT_USING_USER_MAIN
     default y
 
-menu "Onboard Peripheral Drivers"
-    config BSP_USING_SDRAM
-        bool "Enable SDRAM"
-        select BSP_USING_FMC
-        default n
-
-    config BSP_USING_LCD_MIPI
-        bool
-        default n
-        
-    config BSP_USING_LCD_OTM8009A
-        bool "Enable LCD OTM8009A"
-        select BSP_USING_SDRAM
-        select BSP_USING_LTDC
-        select BSP_USING_LCD_MIPI
-        default n
-        
-    config BSP_USING_TOUCH
-        bool "Enable TOUCH"
-        select BSP_USING_I2C1
-        default n
-        if BSP_USING_TOUCH
-            config BSP_TOUCH_INT_PIN
-                int "Touch interrupt pin"
-                default 149
-            config BSP_I2C_NAME
-                string "I2C Bus Name"
-                default "i2c1"
-        endif
-endmenu
-
 menu "On-chip Peripheral Drivers"
     config BSP_USING_GPIO
         bool "Enable GPIO"
@@ -66,7 +35,6 @@ menu "On-chip Peripheral Drivers"
         select RT_USING_PIN
         default n
         if BSP_USING_I2C1 
-            comment "Notice: PB8 --> 24; PB9 --> 25" 
             config BSP_I2C1_SCL_PIN
                 int "I2C1 scl pin number"
                 range 1 176
@@ -104,20 +72,10 @@ menu "On-chip Peripheral Drivers"
         select RT_USING_SPI
         default n
 
-    config BSP_USING_ON_CHIP_FLASH
-        bool "Enable on-chip FLASH"
-        default n
-
     config BSP_USING_FMC
         bool "Enable FMC"
         default n
 
-    config BSP_USING_SDIO
-        bool "Enable SDIO"
-        select RT_USING_SDIO
-        select RT_USING_DFS
-        default n
-
     config BSP_USING_USBD_FS
         bool "Enable OTGFS as USB device"
         select RT_USING_USB_DEVICE

bsp/stm32/stm32f429-st-disco/rtconfig.h

@@ -165,9 +165,6 @@
 
 #define SOC_STM32F429ZI
 
-/* Onboard Peripheral Drivers */
-
-
 /* On-chip Peripheral Drivers */
 
 #define BSP_USING_GPIO