diff --git a/bsp/lm3s_9b9x/Libraries/SConscript b/bsp/lm3s_9b9x/Libraries/SConscript new file mode 100644 index 0000000000000000000000000000000000000000..96ed07572485e161e33cae896f6b5f8afcdfc1e3 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/SConscript @@ -0,0 +1,36 @@ +Import('RTT_ROOT') +Import('rtconfig') +from building import * + +# The set of source files associated with this SConscript file. +src = Split(""" + driverlib/adc.c + driverlib/can.c + driverlib/comp.c + driverlib/cpu.c + driverlib/epi.c + driverlib/ethernet.c + driverlib/flash.c + driverlib/gpio.c + driverlib/hibernate.c + driverlib/i2c.c + driverlib/i2s.c + driverlib/interrupt.c + driverlib/mpu.c + driverlib/pwm.c + driverlib/qei.c + driverlib/ssi.c + driverlib/sysctl.c + driverlib/systick.c + driverlib/timer.c + driverlib/uart.c + driverlib/udma.c + driverlib/usb.c + driverlib/watchdog.c +""") + +CPPPATH = [RTT_ROOT + '/bsp/lm3s/Libraries/inc', RTT_ROOT + '/bsp/lm3s/Libraries', RTT_ROOT + '/bsp/lm3s/Libraries/driverlib'] + +group = DefineGroup('library', src, depend = [''], CPPPATH = CPPPATH) + +Return('group') diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/adc.c b/bsp/lm3s_9b9x/Libraries/driverlib/adc.c new file mode 100644 index 0000000000000000000000000000000000000000..d0729a8636fcb265295bda8332f77040c0c4df30 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/adc.c @@ -0,0 +1,1470 @@ +//***************************************************************************** +// +// adc.c - Driver for the ADC. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +//***************************************************************************** +// +//! \addtogroup adc_api +//! @{ +// +//***************************************************************************** + +#include "inc/hw_adc.h" +#include "inc/hw_ints.h" +#include "inc/hw_memmap.h" +#include "inc/hw_types.h" +#include "driverlib/adc.h" +#include "driverlib/debug.h" +#include "driverlib/interrupt.h" + +//***************************************************************************** +// +// These defines are used by the ADC driver to simplify access to the ADC +// sequencer's registers. +// +//***************************************************************************** +#define ADC_SEQ (ADC_O_SSMUX0) +#define ADC_SEQ_STEP (ADC_O_SSMUX1 - ADC_O_SSMUX0) +#define ADC_SSMUX (ADC_O_SSMUX0 - ADC_O_SSMUX0) +#define ADC_SSCTL (ADC_O_SSCTL0 - ADC_O_SSMUX0) +#define ADC_SSFIFO (ADC_O_SSFIFO0 - ADC_O_SSMUX0) +#define ADC_SSFSTAT (ADC_O_SSFSTAT0 - ADC_O_SSMUX0) +#define ADC_SSOP (ADC_O_SSOP0 - ADC_O_SSMUX0) +#define ADC_SSDC (ADC_O_SSDC0 - ADC_O_SSMUX0) + +//***************************************************************************** +// +// The currently configured software oversampling factor for each of the ADC +// sequencers. +// +//***************************************************************************** +static unsigned char g_pucOversampleFactor[3]; + +//***************************************************************************** +// +//! Registers an interrupt handler for an ADC interrupt. +//! +//! \param ulBase is the base address of the ADC module. +//! \param ulSequenceNum is the sample sequence number. +//! \param pfnHandler is a pointer to the function to be called when the +//! ADC sample sequence interrupt occurs. +//! +//! This function sets the handler to be called when a sample sequence +//! interrupt occurs. This will enable the global interrupt in the interrupt +//! controller; the sequence interrupt must be enabled with ADCIntEnable(). It +//! is the interrupt handler's responsibility to clear the interrupt source via +//! ADCIntClear(). +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +ADCIntRegister(unsigned long ulBase, unsigned long ulSequenceNum, + void (*pfnHandler)(void)) +{ + unsigned long ulInt; + + // + // Check the arguments. + // + ASSERT((ulBase == ADC0_BASE) || (ulBase == ADC1_BASE)); + ASSERT(ulSequenceNum < 4); + + // + // Determine the interrupt to register based on the sequence number. + // + ulInt = ((ulBase == ADC0_BASE) ? (INT_ADC0SS0 + ulSequenceNum) : + (INT_ADC1SS0 + ulSequenceNum)); + + // + // Register the interrupt handler. + // + IntRegister(ulInt, pfnHandler); + + // + // Enable the timer interrupt. + // + IntEnable(ulInt); +} + +//***************************************************************************** +// +//! Unregisters the interrupt handler for an ADC interrupt. +//! +//! \param ulBase is the base address of the ADC module. +//! \param ulSequenceNum is the sample sequence number. +//! +//! This function unregisters the interrupt handler. This will disable the +//! global interrupt in the interrupt controller; the sequence interrupt must +//! be disabled via ADCIntDisable(). +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +ADCIntUnregister(unsigned long ulBase, unsigned long ulSequenceNum) +{ + unsigned long ulInt; + + // + // Check the arguments. + // + ASSERT((ulBase == ADC0_BASE) || (ulBase == ADC1_BASE)); + ASSERT(ulSequenceNum < 4); + + // + // Determine the interrupt to unregister based on the sequence number. + // + ulInt = ((ulBase == ADC0_BASE) ? (INT_ADC0SS0 + ulSequenceNum) : + (INT_ADC1SS0 + ulSequenceNum)); + + // + // Disable the interrupt. + // + IntDisable(ulInt); + + // + // Unregister the interrupt handler. + // + IntUnregister(ulInt); +} + +//***************************************************************************** +// +//! Disables a sample sequence interrupt. +//! +//! \param ulBase is the base address of the ADC module. +//! \param ulSequenceNum is the sample sequence number. +//! +//! This function disables the requested sample sequence interrupt. +//! +//! \return None. +// +//***************************************************************************** +void +ADCIntDisable(unsigned long ulBase, unsigned long ulSequenceNum) +{ + // + // Check the arguments. + // + ASSERT((ulBase == ADC0_BASE) || (ulBase == ADC1_BASE)); + ASSERT(ulSequenceNum < 4); + + // + // Disable this sample sequence interrupt. + // + HWREG(ulBase + ADC_O_IM) &= ~(1 << ulSequenceNum); +} + +//***************************************************************************** +// +//! Enables a sample sequence interrupt. +//! +//! \param ulBase is the base address of the ADC module. +//! \param ulSequenceNum is the sample sequence number. +//! +//! This function enables the requested sample sequence interrupt. Any +//! outstanding interrupts are cleared before enabling the sample sequence +//! interrupt. +//! +//! \return None. +// +//***************************************************************************** +void +ADCIntEnable(unsigned long ulBase, unsigned long ulSequenceNum) +{ + // + // Check the arguments. + // + ASSERT((ulBase == ADC0_BASE) || (ulBase == ADC1_BASE)); + ASSERT(ulSequenceNum < 4); + + // + // Clear any outstanding interrupts on this sample sequence. + // + HWREG(ulBase + ADC_O_ISC) = 1 << ulSequenceNum; + + // + // Enable this sample sequence interrupt. + // + HWREG(ulBase + ADC_O_IM) |= 1 << ulSequenceNum; +} + +//***************************************************************************** +// +//! Gets the current interrupt status. +//! +//! \param ulBase is the base address of the ADC module. +//! \param ulSequenceNum is the sample sequence number. +//! \param bMasked is false if the raw interrupt status is required and true if +//! the masked interrupt status is required. +//! +//! This returns the interrupt status for the specified sample sequence. +//! Either the raw interrupt status or the status of interrupts that are +//! allowed to reflect to the processor can be returned. +//! +//! \return The current raw or masked interrupt status. +// +//***************************************************************************** +unsigned long +ADCIntStatus(unsigned long ulBase, unsigned long ulSequenceNum, + tBoolean bMasked) +{ + unsigned long ulTemp; + + // + // Check the arguments. + // + ASSERT((ulBase == ADC0_BASE) || (ulBase == ADC1_BASE)); + ASSERT(ulSequenceNum < 4); + + // + // Return either the interrupt status or the raw interrupt status as + // requested. + // + if(bMasked) + { + ulTemp = HWREG(ulBase + ADC_O_ISC) & (0x10001 << ulSequenceNum); + } + else + { + ulTemp = HWREG(ulBase + ADC_O_RIS) & (0x10000 | (1 << ulSequenceNum)); + + // + // If the digital comparator status bit is set, reflect it to the + // appropriate sequence bit. + // + if(ulTemp & 0x10000) + { + ulTemp |= 0xF0000; + ulTemp &= ~(0x10000 << ulSequenceNum); + } + } + + // + // Return the interrupt status + // + return(ulTemp); +} + +//***************************************************************************** +// +//! Clears sample sequence interrupt source. +//! +//! \param ulBase is the base address of the ADC module. +//! \param ulSequenceNum is the sample sequence number. +//! +//! The specified sample sequence interrupt is cleared, so that it no longer +//! asserts. This must be done in the interrupt handler to keep it from being +//! called again immediately upon exit. +//! +//! \note Since there is a write buffer in the Cortex-M3 processor, it may take +//! several clock cycles before the interrupt source is actually cleared. +//! Therefore, it is recommended that the interrupt source be cleared early in +//! the interrupt handler (as opposed to the very last action) to avoid +//! returning from the interrupt handler before the interrupt source is +//! actually cleared. Failure to do so may result in the interrupt handler +//! being immediately reentered (since NVIC still sees the interrupt source +//! asserted). +//! +//! \return None. +// +//***************************************************************************** +void +ADCIntClear(unsigned long ulBase, unsigned long ulSequenceNum) +{ + // + // Check the arugments. + // + ASSERT((ulBase == ADC0_BASE) || (ulBase == ADC1_BASE)); + ASSERT(ulSequenceNum < 4); + + // + // Clear the interrupt. + // + HWREG(ulBase + ADC_O_ISC) = 1 << ulSequenceNum; +} + +//***************************************************************************** +// +//! Enables a sample sequence. +//! +//! \param ulBase is the base address of the ADC module. +//! \param ulSequenceNum is the sample sequence number. +//! +//! Allows the specified sample sequence to be captured when its trigger is +//! detected. A sample sequence must be configured before it is enabled. +//! +//! \return None. +// +//***************************************************************************** +void +ADCSequenceEnable(unsigned long ulBase, unsigned long ulSequenceNum) +{ + // + // Check the arugments. + // + ASSERT((ulBase == ADC0_BASE) || (ulBase == ADC1_BASE)); + ASSERT(ulSequenceNum < 4); + + // + // Enable the specified sequence. + // + HWREG(ulBase + ADC_O_ACTSS) |= 1 << ulSequenceNum; +} + +//***************************************************************************** +// +//! Disables a sample sequence. +//! +//! \param ulBase is the base address of the ADC module. +//! \param ulSequenceNum is the sample sequence number. +//! +//! Prevents the specified sample sequence from being captured when its trigger +//! is detected. A sample sequence should be disabled before it is configured. +//! +//! \return None. +// +//***************************************************************************** +void +ADCSequenceDisable(unsigned long ulBase, unsigned long ulSequenceNum) +{ + // + // Check the arugments. + // + ASSERT((ulBase == ADC0_BASE) || (ulBase == ADC1_BASE)); + ASSERT(ulSequenceNum < 4); + + // + // Disable the specified sequences. + // + HWREG(ulBase + ADC_O_ACTSS) &= ~(1 << ulSequenceNum); +} + +//***************************************************************************** +// +//! Configures the trigger source and priority of a sample sequence. +//! +//! \param ulBase is the base address of the ADC module. +//! \param ulSequenceNum is the sample sequence number. +//! \param ulTrigger is the trigger source that initiates the sample sequence; +//! must be one of the \b ADC_TRIGGER_* values. +//! \param ulPriority is the relative priority of the sample sequence with +//! respect to the other sample sequences. +//! +//! This function configures the initiation criteria for a sample sequence. +//! Valid sample sequences range from zero to three; sequence zero will capture +//! up to eight samples, sequences one and two will capture up to four samples, +//! and sequence three will capture a single sample. The trigger condition and +//! priority (with respect to other sample sequence execution) is set. +//! +//! The \e ulTrigger parameter can take on the following values: +//! +//! - \b ADC_TRIGGER_PROCESSOR - A trigger generated by the processor, via the +//! ADCProcessorTrigger() function. +//! - \b ADC_TRIGGER_COMP0 - A trigger generated by the first analog +//! comparator; configured with ComparatorConfigure(). +//! - \b ADC_TRIGGER_COMP1 - A trigger generated by the second analog +//! comparator; configured with ComparatorConfigure(). +//! - \b ADC_TRIGGER_COMP2 - A trigger generated by the third analog +//! comparator; configured with ComparatorConfigure(). +//! - \b ADC_TRIGGER_EXTERNAL - A trigger generated by an input from the Port +//! B4 pin. +//! - \b ADC_TRIGGER_TIMER - A trigger generated by a timer; configured with +//! TimerControlTrigger(). +//! - \b ADC_TRIGGER_PWM0 - A trigger generated by the first PWM generator; +//! configured with PWMGenIntTrigEnable(). +//! - \b ADC_TRIGGER_PWM1 - A trigger generated by the second PWM generator; +//! configured with PWMGenIntTrigEnable(). +//! - \b ADC_TRIGGER_PWM2 - A trigger generated by the third PWM generator; +//! configured with PWMGenIntTrigEnable(). +//! - \b ADC_TRIGGER_PWM3 - A trigger generated by the fourth PWM generator; +//! configured with PWMGenIntTrigEnable(). +//! - \b ADC_TRIGGER_ALWAYS - A trigger that is always asserted, causing the +//! sample sequence to capture repeatedly (so long as +//! there is not a higher priority source active). +//! +//! Note that not all trigger sources are available on all Stellaris family +//! members; consult the data sheet for the device in question to determine the +//! availability of triggers. +//! +//! The \e ulPriority parameter is a value between 0 and 3, where 0 represents +//! the highest priority and 3 the lowest. Note that when programming the +//! priority among a set of sample sequences, each must have unique priority; +//! it is up to the caller to guarantee the uniqueness of the priorities. +//! +//! \return None. +// +//***************************************************************************** +void +ADCSequenceConfigure(unsigned long ulBase, unsigned long ulSequenceNum, + unsigned long ulTrigger, unsigned long ulPriority) +{ + // + // Check the arugments. + // + ASSERT((ulBase == ADC0_BASE) || (ulBase == ADC1_BASE)); + ASSERT(ulSequenceNum < 4); + ASSERT((ulTrigger == ADC_TRIGGER_PROCESSOR) || + (ulTrigger == ADC_TRIGGER_COMP0) || + (ulTrigger == ADC_TRIGGER_COMP1) || + (ulTrigger == ADC_TRIGGER_COMP2) || + (ulTrigger == ADC_TRIGGER_EXTERNAL) || + (ulTrigger == ADC_TRIGGER_TIMER) || + (ulTrigger == ADC_TRIGGER_PWM0) || + (ulTrigger == ADC_TRIGGER_PWM1) || + (ulTrigger == ADC_TRIGGER_PWM2) || + (ulTrigger == ADC_TRIGGER_PWM3) || + (ulTrigger == ADC_TRIGGER_ALWAYS)); + ASSERT(ulPriority < 4); + + // + // Compute the shift for the bits that control this sample sequence. + // + ulSequenceNum *= 4; + + // + // Set the trigger event for this sample sequence. + // + HWREG(ulBase + ADC_O_EMUX) = ((HWREG(ulBase + ADC_O_EMUX) & + ~(0xf << ulSequenceNum)) | + ((ulTrigger & 0xf) << ulSequenceNum)); + + // + // Set the priority for this sample sequence. + // + HWREG(ulBase + ADC_O_SSPRI) = ((HWREG(ulBase + ADC_O_SSPRI) & + ~(0xf << ulSequenceNum)) | + ((ulPriority & 0x3) << ulSequenceNum)); +} + +//***************************************************************************** +// +//! Configure a step of the sample sequencer. +//! +//! \param ulBase is the base address of the ADC module. +//! \param ulSequenceNum is the sample sequence number. +//! \param ulStep is the step to be configured. +//! \param ulConfig is the configuration of this step; must be a logical OR of +//! \b ADC_CTL_TS, \b ADC_CTL_IE, \b ADC_CTL_END, \b ADC_CTL_D, and one of the +//! input channel selects (\b ADC_CTL_CH0 through \b ADC_CTL_CH15). For parts +//! with the digital comparator feature, the follow values may also be OR'd +//! into the \e ulConfig value to enable the digital comparater feature: +//! \b ADC_CTL_CE and one of the comparater selects (\b ADC_CTL_CMP0 through +//! \b ADC_CTL_CMP7). +//! +//! This function will set the configuration of the ADC for one step of a +//! sample sequence. The ADC can be configured for single-ended or +//! differential operation (the \b ADC_CTL_D bit selects differential +//! operation when set), the channel to be sampled can be chosen (the +//! \b ADC_CTL_CH0 through \b ADC_CTL_CH15 values), and the internal +//! temperature sensor can be selected (the \b ADC_CTL_TS bit). Additionally, +//! this step can be defined as the last in the sequence (the \b ADC_CTL_END +//! bit) and it can be configured to cause an interrupt when the step is +//! complete (the \b ADC_CTL_IE bit). If the digital comparators are present +//! on the device, this step may also be configured send the ADC sample to +//! the selected comparator (the \b ADC_CTL_CMP0 through \b ADC_CTL_CMP7 +//! values) by using the \b ADC_CTL_CE bit. The configuration is used by the +//! ADC at the appropriate time when the trigger for this sequence occurs. +//! +//! \note If the Digitial Comparator is present and enabled using the +//! \b ADC_CTL_CE bit, the ADC sample will NOT be written into the ADC +//! sequence data FIFO. +//! +//! The \e ulStep parameter determines the order in which the samples are +//! captured by the ADC when the trigger occurs. It can range from zero to +//! seven for the first sample sequence, from zero to three for the second and +//! third sample sequence, and can only be zero for the fourth sample sequence. +//! +//! Differential mode only works with adjacent channel pairs (for example, 0 +//! and 1). The channel select must be the number of the channel pair to +//! sample (for example, \b ADC_CTL_CH0 for 0 and 1, or \b ADC_CTL_CH1 for 2 +//! and 3) or undefined results will be returned by the ADC. Additionally, if +//! differential mode is selected when the temperature sensor is being sampled, +//! undefined results will be returned by the ADC. +//! +//! It is the responsibility of the caller to ensure that a valid configuration +//! is specified; this function does not check the validity of the specified +//! configuration. +//! +//! \return None. +// +//***************************************************************************** +void +ADCSequenceStepConfigure(unsigned long ulBase, unsigned long ulSequenceNum, + unsigned long ulStep, unsigned long ulConfig) +{ + unsigned long ulTemp; + + // + // Check the arugments. + // + ASSERT((ulBase == ADC0_BASE) || (ulBase == ADC1_BASE)); + ASSERT(ulSequenceNum < 4); + ASSERT(((ulSequenceNum == 0) && (ulStep < 8)) || + ((ulSequenceNum == 1) && (ulStep < 4)) || + ((ulSequenceNum == 2) && (ulStep < 4)) || + ((ulSequenceNum == 3) && (ulStep < 1))); + + // + // Get the offset of the sequence to be configured. + // + ulBase += ADC_SEQ + (ADC_SEQ_STEP * ulSequenceNum); + + // + // Compute the shift for the bits that control this step. + // + ulStep *= 4; + + // + // Set the analog mux value for this step. + // + HWREG(ulBase + ADC_SSMUX) = ((HWREG(ulBase + ADC_SSMUX) & + ~(0x0000000f << ulStep)) | + ((ulConfig & 0x0f) << ulStep)); + + // + // Set the control value for this step. + // + HWREG(ulBase + ADC_SSCTL) = ((HWREG(ulBase + ADC_SSCTL) & + ~(0x0000000f << ulStep)) | + (((ulConfig & 0xf0) >> 4) << ulStep)); + + // + // Enable digital comparator if specified in the ulConfig bit-fields. + // + if(ulConfig & 0x000F0000) + { + // + // Program the comparator for the specified step. + // + ulTemp = HWREG(ulBase + ADC_SSDC); + ulTemp &= ~(0xF << ulStep); + ulTemp |= (((ulConfig & 0x00070000) >> 16) << ulStep); + HWREG(ulBase + ADC_SSDC) = ulTemp; + + // + // Enable the comparator. + // + ulTemp = HWREG(ulBase + ADC_SSOP); + ulTemp |= (1 << ulStep); + HWREG(ulBase + ADC_SSOP) = ulTemp; + } + + // + // Disable digital comparator if not specified. + // + else + { + ulTemp = HWREG(ulBase + ADC_SSOP); + ulTemp &= ~(1 << ulStep); + HWREG(ulBase + ADC_SSOP) = ulTemp; + } +} + +//***************************************************************************** +// +//! Determines if a sample sequence overflow occurred. +//! +//! \param ulBase is the base address of the ADC module. +//! \param ulSequenceNum is the sample sequence number. +//! +//! This determines if a sample sequence overflow has occurred. This will +//! happen if the captured samples are not read from the FIFO before the next +//! trigger occurs. +//! +//! \return Returns zero if there was not an overflow, and non-zero if there +//! was. +// +//***************************************************************************** +long +ADCSequenceOverflow(unsigned long ulBase, unsigned long ulSequenceNum) +{ + // + // Check the arguments. + // + ASSERT((ulBase == ADC0_BASE) || (ulBase == ADC1_BASE)); + ASSERT(ulSequenceNum < 4); + + // + // Determine if there was an overflow on this sequence. + // + return(HWREG(ulBase + ADC_O_OSTAT) & (1 << ulSequenceNum)); +} + +//***************************************************************************** +// +//! Clears the overflow condition on a sample sequence. +//! +//! \param ulBase is the base address of the ADC module. +//! \param ulSequenceNum is the sample sequence number. +//! +//! This will clear an overflow condition on one of the sample sequences. The +//! overflow condition must be cleared in order to detect a subsequent overflow +//! condition (it otherwise causes no harm). +//! +//! \return None. +// +//***************************************************************************** +void +ADCSequenceOverflowClear(unsigned long ulBase, unsigned long ulSequenceNum) +{ + // + // Check the arguments. + // + ASSERT((ulBase == ADC0_BASE) || (ulBase == ADC1_BASE)); + ASSERT(ulSequenceNum < 4); + + // + // Clear the overflow condition for this sequence. + // + HWREG(ulBase + ADC_O_OSTAT) = 1 << ulSequenceNum; +} + +//***************************************************************************** +// +//! Determines if a sample sequence underflow occurred. +//! +//! \param ulBase is the base address of the ADC module. +//! \param ulSequenceNum is the sample sequence number. +//! +//! This determines if a sample sequence underflow has occurred. This will +//! happen if too many samples are read from the FIFO. +//! +//! \return Returns zero if there was not an underflow, and non-zero if there +//! was. +// +//***************************************************************************** +long +ADCSequenceUnderflow(unsigned long ulBase, unsigned long ulSequenceNum) +{ + // + // Check the arguments. + // + ASSERT((ulBase == ADC0_BASE) || (ulBase == ADC1_BASE)); + ASSERT(ulSequenceNum < 4); + + // + // Determine if there was an underflow on this sequence. + // + return(HWREG(ulBase + ADC_O_USTAT) & (1 << ulSequenceNum)); +} + +//***************************************************************************** +// +//! Clears the underflow condition on a sample sequence. +//! +//! \param ulBase is the base address of the ADC module. +//! \param ulSequenceNum is the sample sequence number. +//! +//! This will clear an underflow condition on one of the sample sequences. The +//! underflow condition must be cleared in order to detect a subsequent +//! underflow condition (it otherwise causes no harm). +//! +//! \return None. +// +//***************************************************************************** +void +ADCSequenceUnderflowClear(unsigned long ulBase, unsigned long ulSequenceNum) +{ + // + // Check the arguments. + // + ASSERT((ulBase == ADC0_BASE) || (ulBase == ADC1_BASE)); + ASSERT(ulSequenceNum < 4); + + // + // Clear the underflow condition for this sequence. + // + HWREG(ulBase + ADC_O_USTAT) = 1 << ulSequenceNum; +} + +//***************************************************************************** +// +//! Gets the captured data for a sample sequence. +//! +//! \param ulBase is the base address of the ADC module. +//! \param ulSequenceNum is the sample sequence number. +//! \param pulBuffer is the address where the data is stored. +//! +//! This function copies data from the specified sample sequence output FIFO to +//! a memory resident buffer. The number of samples available in the hardware +//! FIFO are copied into the buffer, which is assumed to be large enough to +//! hold that many samples. This will only return the samples that are +//! presently available, which may not be the entire sample sequence if it is +//! in the process of being executed. +//! +//! \return Returns the number of samples copied to the buffer. +// +//***************************************************************************** +long +ADCSequenceDataGet(unsigned long ulBase, unsigned long ulSequenceNum, + unsigned long *pulBuffer) +{ + unsigned long ulCount; + + // + // Check the arguments. + // + ASSERT((ulBase == ADC0_BASE) || (ulBase == ADC1_BASE)); + ASSERT(ulSequenceNum < 4); + + // + // Get the offset of the sequence to be read. + // + ulBase += ADC_SEQ + (ADC_SEQ_STEP * ulSequenceNum); + + // + // Read samples from the FIFO until it is empty. + // + ulCount = 0; + while(!(HWREG(ulBase + ADC_SSFSTAT) & ADC_SSFSTAT0_EMPTY) && (ulCount < 8)) + { + // + // Read the FIFO and copy it to the destination. + // + *pulBuffer++ = HWREG(ulBase + ADC_SSFIFO); + + // + // Increment the count of samples read. + // + ulCount++; + } + + // + // Return the number of samples read. + // + return(ulCount); +} + +//***************************************************************************** +// +//! Causes a processor trigger for a sample sequence. +//! +//! \param ulBase is the base address of the ADC module. +//! \param ulSequenceNum is the sample sequence number, with +//! \b ADC_TRIGGER_WAIT or \b ADC_TRIGGER_SIGNAL optionally ORed into it. +//! +//! This function triggers a processor-initiated sample sequence if the sample +//! sequence trigger is configured to \b ADC_TRIGGER_PROCESSOR. If +//! \b ADC_TRIGGER_WAIT is ORed into the sequence number, the +//! processor-initiated trigger is delayed until a later processor-initiated +//! trigger to a different ADC module that specifies \b ADC_TRIGGER_SIGNAL, +//! allowing multiple ADCs to start from a processor-initiated trigger in a +//! synchronous manner. +//! +//! \return None. +// +//***************************************************************************** +void +ADCProcessorTrigger(unsigned long ulBase, unsigned long ulSequenceNum) +{ + // + // Check the arguments. + // + ASSERT((ulBase == ADC0_BASE) || (ulBase == ADC1_BASE)); + ASSERT((ulSequenceNum & 0xf) < 4); + + // + // Generate a processor trigger for this sample sequence. + // + HWREG(ulBase + ADC_O_PSSI) = ((ulSequenceNum & 0xffff0000) | + (1 << (ulSequenceNum & 0xf))); +} + +//***************************************************************************** +// +//! Configures the software oversampling factor of the ADC. +//! +//! \param ulBase is the base address of the ADC module. +//! \param ulSequenceNum is the sample sequence number. +//! \param ulFactor is the number of samples to be averaged. +//! +//! This function configures the software oversampling for the ADC, which can +//! be used to provide better resolution on the sampled data. Oversampling is +//! accomplished by averaging multiple samples from the same analog input. +//! Three different oversampling rates are supported; 2x, 4x, and 8x. +//! +//! Oversampling is only supported on the sample sequencers that are more than +//! one sample in depth (that is, the fourth sample sequencer is not +//! supported). Oversampling by 2x (for example) divides the depth of the +//! sample sequencer by two; so 2x oversampling on the first sample sequencer +//! can only provide four samples per trigger. This also means that 8x +//! oversampling is only available on the first sample sequencer. +//! +//! \return None. +// +//***************************************************************************** +void +ADCSoftwareOversampleConfigure(unsigned long ulBase, + unsigned long ulSequenceNum, + unsigned long ulFactor) +{ + unsigned long ulValue; + + // + // Check the arguments. + // + ASSERT((ulBase == ADC0_BASE) || (ulBase == ADC1_BASE)); + ASSERT(ulSequenceNum < 3); + ASSERT(((ulFactor == 2) || (ulFactor == 4) || (ulFactor == 8)) && + ((ulSequenceNum == 0) || (ulFactor != 8))); + + // + // Convert the oversampling factor to a shift factor. + // + for(ulValue = 0, ulFactor >>= 1; ulFactor; ulValue++, ulFactor >>= 1) + { + } + + // + // Save the sfiht factor. + // + g_pucOversampleFactor[ulSequenceNum] = ulValue; +} + +//***************************************************************************** +// +//! Configures a step of the software oversampled sequencer. +//! +//! \param ulBase is the base address of the ADC module. +//! \param ulSequenceNum is the sample sequence number. +//! \param ulStep is the step to be configured. +//! \param ulConfig is the configuration of this step. +//! +//! This function configures a step of the sample sequencer when using the +//! software oversampling feature. The number of steps available depends on +//! the oversampling factor set by ADCSoftwareOversampleConfigure(). The value +//! of \e ulConfig is the same as defined for ADCSequenceStepConfigure(). +//! +//! \return None. +// +//***************************************************************************** +void +ADCSoftwareOversampleStepConfigure(unsigned long ulBase, + unsigned long ulSequenceNum, + unsigned long ulStep, + unsigned long ulConfig) +{ + // + // Check the arguments. + // + ASSERT((ulBase == ADC0_BASE) || (ulBase == ADC1_BASE)); + ASSERT(ulSequenceNum < 3); + ASSERT(((ulSequenceNum == 0) && + (ulStep < (8 >> g_pucOversampleFactor[ulSequenceNum]))) || + (ulStep < (4 >> g_pucOversampleFactor[ulSequenceNum]))); + + // + // Get the offset of the sequence to be configured. + // + ulBase += ADC_SEQ + (ADC_SEQ_STEP * ulSequenceNum); + + // + // Compute the shift for the bits that control this step. + // + ulStep *= 4 << g_pucOversampleFactor[ulSequenceNum]; + + // + // Loop through the hardware steps that make up this step of the software + // oversampled sequence. + // + for(ulSequenceNum = 1 << g_pucOversampleFactor[ulSequenceNum]; + ulSequenceNum; ulSequenceNum--) + { + // + // Set the analog mux value for this step. + // + HWREG(ulBase + ADC_SSMUX) = ((HWREG(ulBase + ADC_SSMUX) & + ~(0x0000000f << ulStep)) | + ((ulConfig & 0x0f) << ulStep)); + + // + // Set the control value for this step. + // + HWREG(ulBase + ADC_SSCTL) = ((HWREG(ulBase + ADC_SSCTL) & + ~(0x0000000f << ulStep)) | + (((ulConfig & 0xf0) >> 4) << ulStep)); + if(ulSequenceNum != 1) + { + HWREG(ulBase + ADC_SSCTL) &= ~((ADC_SSCTL0_IE0 | + ADC_SSCTL0_END0) << ulStep); + } + + // + // Go to the next hardware step. + // + ulStep += 4; + } +} + +//***************************************************************************** +// +//! Gets the captured data for a sample sequence using software oversampling. +//! +//! \param ulBase is the base address of the ADC module. +//! \param ulSequenceNum is the sample sequence number. +//! \param pulBuffer is the address where the data is stored. +//! \param ulCount is the number of samples to be read. +//! +//! This function copies data from the specified sample sequence output FIFO to +//! a memory resident buffer with software oversampling applied. The requested +//! number of samples are copied into the data buffer; if there are not enough +//! samples in the hardware FIFO to satisfy this many oversampled data items +//! then incorrect results will be returned. It is the caller's responsibility +//! to read only the samples that are available and wait until enough data is +//! available, for example as a result of receiving an interrupt. +//! +//! \return None. +// +//***************************************************************************** +void +ADCSoftwareOversampleDataGet(unsigned long ulBase, unsigned long ulSequenceNum, + unsigned long *pulBuffer, unsigned long ulCount) +{ + unsigned long ulIdx, ulAccum; + + // + // Check the arguments. + // + ASSERT((ulBase == ADC0_BASE) || (ulBase == ADC1_BASE)); + ASSERT(ulSequenceNum < 3); + ASSERT(((ulSequenceNum == 0) && + (ulCount < (8 >> g_pucOversampleFactor[ulSequenceNum]))) || + (ulCount < (4 >> g_pucOversampleFactor[ulSequenceNum]))); + + // + // Get the offset of the sequence to be read. + // + ulBase += ADC_SEQ + (ADC_SEQ_STEP * ulSequenceNum); + + // + // Read the samples from the FIFO until it is empty. + // + while(ulCount--) + { + // + // Compute the sum of the samples. + // + ulAccum = 0; + for(ulIdx = 1 << g_pucOversampleFactor[ulSequenceNum]; ulIdx; ulIdx--) + { + // + // Read the FIFO and add it to the accumulator. + // + ulAccum += HWREG(ulBase + ADC_SSFIFO); + } + + // + // Write the averaged sample to the output buffer. + // + *pulBuffer++ = ulAccum >> g_pucOversampleFactor[ulSequenceNum]; + } +} + +//***************************************************************************** +// +//! Configures the hardware oversampling factor of the ADC. +//! +//! \param ulBase is the base address of the ADC module. +//! \param ulFactor is the number of samples to be averaged. +//! +//! This function configures the hardware oversampling for the ADC, which can +//! be used to provide better resolution on the sampled data. Oversampling is +//! accomplished by averaging multiple samples from the same analog input. Six +//! different oversampling rates are supported; 2x, 4x, 8x, 16x, 32x, and 64x. +//! Specifying an oversampling factor of zero will disable hardware +//! oversampling. +//! +//! Hardware oversampling applies uniformly to all sample sequencers. It does +//! not reduce the depth of the sample sequencers like the software +//! oversampling APIs; each sample written into the sample sequence FIFO is a +//! fully oversampled analog input reading. +//! +//! Enabling hardware averaging increases the precision of the ADC at the cost +//! of throughput. For example, enabling 4x oversampling reduces the +//! throughput of a 250 Ksps ADC to 62.5 Ksps. +//! +//! \note Hardware oversampling is available beginning with Rev C0 of the +//! Stellaris microcontroller. +//! +//! \return None. +// +//***************************************************************************** +void +ADCHardwareOversampleConfigure(unsigned long ulBase, unsigned long ulFactor) +{ + unsigned long ulValue; + + // + // Check the arguments. + // + ASSERT((ulBase == ADC0_BASE) || (ulBase == ADC1_BASE)); + ASSERT(((ulFactor == 0) || (ulFactor == 2) || (ulFactor == 4) || + (ulFactor == 8) || (ulFactor == 16) || (ulFactor == 32) || + (ulFactor == 64))); + + // + // Convert the oversampling factor to a shift factor. + // + for(ulValue = 0, ulFactor >>= 1; ulFactor; ulValue++, ulFactor >>= 1) + { + } + + // + // Write the shift factor to the ADC to configure the hardware oversampler. + // + HWREG(ulBase + ADC_O_SAC) = ulValue; +} + +//***************************************************************************** +// +//! Configures an ADC digital comparator. +//! +//! \param ulBase is the base address of the ADC module. +//! \param ulComp is the index of the comparator to configure. +//! \param ulConfig is the configuration of the comparator. +//! +//! This function will configure a comparator. The \e ulConfig parameter is +//! the result of a logical OR operation between the \b ADC_COMP_TRIG_xxx, and +//! \b ADC_COMP_INT_xxx values. +//! +//! The \b ADC_COMP_TRIG_xxx term can take on the following values: +//! +//! - \b ADC_COMP_TRIG_NONE to never trigger PWM fault condition. +//! - \b ADC_COMP_TRIG_LOW_ALWAYS to always trigger PWM fault condition when +//! ADC output is in the low-band. +//! - \b ADC_COMP_TRIG_LOW_ONCE to trigger PWM fault condition once when ADC +//! output transitions into the low-band. +//! - \b ADC_COMP_TRIG_LOW_HALWAYS to always trigger PWM fault condition when +//! ADC output is in the low-band only if ADC output has been in the high-band +//! since the last trigger output. +//! - \b ADC_COMP_TRIG_LOW_HONCE to trigger PWM fault condition once when ADC +//! output transitions into low-band only if ADC output has been in the +//! high-band since the last trigger output. +//! - \b ADC_COMP_TRIG_MID_ALWAYS to always trigger PWM fault condition when +//! ADC output is in the mid-band. +//! - \b ADC_COMP_TRIG_MID_ONCE to trigger PWM fault condition once when ADC +//! output transitions into the mid-band. +//! - \b ADC_COMP_TRIG_HIGH_ALWAYS to always trigger PWM fault condition when +//! ADC output is in the high-band. +//! - \b ADC_COMP_TRIG_HIGH_ONCE to trigger PWM fault condition once when ADC +//! output transitions into the high-band. +//! - \b ADC_COMP_TRIG_HIGH_HALWAYS to always trigger PWM fault condition when +//! ADC output is in the high-band only if ADC output has been in the low-band +//! since the last trigger output. +//! - \b ADC_COMP_TRIG_HIGH_HONCE to trigger PWM fault condition once when ADC +//! output transitions into high-band only if ADC output has been in the +//! low-band since the last trigger output. +//! +//! The \b ADC_COMP_INT_xxx term can take on the following values: +//! +//! - \b ADC_COMP_INT_NONE to never generate ADC interrupt. +//! - \b ADC_COMP_INT_LOW_ALWAYS to always generate ADC interrupt when ADC +//! output is in the low-band. +//! - \b ADC_COMP_INT_LOW_ONCE to generate ADC interrupt once when ADC output +//! transitions into the low-band. +//! - \b ADC_COMP__INT_LOW_HALWAYS to always generate ADC interrupt when ADC +//! output is in the low-band only if ADC output has been in the high-band +//! since the last trigger output. +//! - \b ADC_COMP_INT_LOW_HONCE to generate ADC interrupt once when ADC output +//! transitions into low-band only if ADC output has been in the high-band +//! since the last trigger output. +//! - \b ADC_COMP_INT_MID_ALWAYS to always generate ADC interrupt when ADC +//! output is in the mid-band. +//! - \b ADC_COMP_INT_MID_ONCE to generate ADC interrupt once when ADC output +//! transitions into the mid-band. +//! - \b ADC_COMP_INT_HIGH_ALWAYS to always generate ADC interrupt when ADC +//! output is in the high-band. +//! - \b ADC_COMP_INT_HIGH_ONCE to generate ADC interrupt once when ADC output +//! transitions into the high-band. +//! - \b ADC_COMP_INT_HIGH_HALWAYS to always generate ADC interrupt when ADC +//! output is in the high-band only if ADC output has been in the low-band +//! since the last trigger output. +//! - \b ADC_COMP_INT_HIGH_HONCE to generate ADC interrupt once when ADC output +//! transitions into high-band only if ADC output has been in the low-band +//! since the last trigger output. +//! +//! \return None. +// +//***************************************************************************** +void +ADCComparatorConfigure(unsigned long ulBase, unsigned long ulComp, + unsigned long ulConfig) +{ + // + // Check the arguments. + // + ASSERT((ulBase == ADC0_BASE) || (ulBase == ADC1_BASE)); + ASSERT(ulComp < 8); + + // + // Save the new setting. + // + HWREG(ulBase + ADC_O_DCCTL0 + (ulComp * 4)) = ulConfig; +} + +//***************************************************************************** +// +//! Defines the ADC digital comparator regions. +//! +//! \param ulBase is the base address of the ADC module. +//! \param ulComp is the index of the comparator to configure. +//! \param ulLowRef is the reference point for the low/mid band threshold. +//! \param ulHighRef is the reference point for the mid/high band threshold. +//! +//! The ADC digital comparator operation is based on three ADC value regions: +//! - \b low-band is defined as any ADC value less than or equal to the +//! \e ulLowRef value. +//! - \b mid-band is defined as any ADC value greater than the \e ulLowRef +//! value but less than or equal to the \e ulHighRef value. +//! - \b high-band is defined as any ADC value greater than the \e ulHighRef +//! value. +//! +//! \return None. +// +//***************************************************************************** +void +ADCComparatorRegionSet(unsigned long ulBase, unsigned long ulComp, + unsigned long ulLowRef, unsigned long ulHighRef) +{ + // + // Check the arguments. + // + ASSERT((ulBase == ADC0_BASE) || (ulBase == ADC1_BASE)); + ASSERT(ulComp < 8); + ASSERT((ulLowRef < 1024) && (ulLowRef <= ulHighRef)); + ASSERT(ulHighRef < 1024); + + // + // Save the new region settings. + // + HWREG(ulBase + ADC_O_DCCMP0 + (ulComp * 4)) = (ulHighRef << 16) | ulLowRef; +} + +//***************************************************************************** +// +//! Resets the current ADC digital comparator conditions. +//! +//! \param ulBase is the base address of the ADC module. +//! \param ulComp is the index of the comparator. +//! \param bTrigger is the flag to indicate reset of Trigger conditions. +//! \param bInterrupt is the flag to indicate reset of Interrupt conditions. +//! +//! Because the digital comparator uses current and previous ADC values, this +//! function is provide to allow the comparator to be reset to its initial +//! value to prevent stale data from being used when a sequence is enabled. +//! +//! \return None. +// +//***************************************************************************** +void +ADCComparatorReset(unsigned long ulBase, unsigned long ulComp, + tBoolean bTrigger, tBoolean bInterrupt) +{ + unsigned long ulTemp = 0; + + // + // Check the arguments. + // + ASSERT((ulBase == ADC0_BASE) || (ulBase == ADC1_BASE)); + ASSERT(ulComp < 8); + + // + // Set the appropriate bits to reset the trigger and/or interrupt + // comparator conditions. + // + if(bTrigger) + { + ulTemp |= (1 << (16 + ulComp)); + } + if(bInterrupt) + { + ulTemp |= (1 << ulComp); + } + + HWREG(ulBase + ADC_O_DCRIC) = ulTemp; +} + +//***************************************************************************** +// +//! Disables a sample sequence comparator interrupt. +//! +//! \param ulBase is the base address of the ADC module. +//! \param ulSequenceNum is the sample sequence number. +//! +//! This function disables the requested sample sequence comparator interrupt. +//! +//! \return None. +// +//***************************************************************************** +void +ADCComparatorIntDisable(unsigned long ulBase, unsigned long ulSequenceNum) +{ + // + // Check the arguments. + // + ASSERT((ulBase == ADC0_BASE) || (ulBase == ADC1_BASE)); + ASSERT(ulSequenceNum < 4); + + // + // Disable this sample sequence comparator interrupt. + // + HWREG(ulBase + ADC_O_IM) &= ~(0x10000 << ulSequenceNum); +} + +//***************************************************************************** +// +//! Enables a sample sequence comparator interrupt. +//! +//! \param ulBase is the base address of the ADC module. +//! \param ulSequenceNum is the sample sequence number. +//! +//! This function enables the requested sample sequence comparator interrupt. +//! +//! \return None. +// +//***************************************************************************** +void +ADCComparatorIntEnable(unsigned long ulBase, unsigned long ulSequenceNum) +{ + // + // Check the arguments. + // + ASSERT((ulBase == ADC0_BASE) || (ulBase == ADC1_BASE)); + ASSERT(ulSequenceNum < 4); + + // + // Enable this sample sequence interrupt. + // + HWREG(ulBase + ADC_O_IM) |= 0x10000 << ulSequenceNum; +} + +//***************************************************************************** +// +//! Gets the current comparator interrupt status. +//! +//! \param ulBase is the base address of the ADC module. +//! +//! This returns the digitial comparator interrupt status bits. This status +//! is sequence agnostic. +//! +//! \return The current comparator interrupt status. +// +//***************************************************************************** +unsigned long +ADCComparatorIntStatus(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == ADC0_BASE) || (ulBase == ADC1_BASE)); + + // + // Return the digitial comparator interrupt status. + // + return(HWREG(ulBase + ADC_O_DCISC)); +} + +//***************************************************************************** +// +//! Clears sample sequence comparator interrupt source. +//! +//! \param ulBase is the base address of the ADC module. +//! \param ulStatus is the bit-mapped interrupts status to clear. +//! +//! The specified interrupt status is cleared. +//! +//! \return None. +// +//***************************************************************************** +void +ADCComparatorIntClear(unsigned long ulBase, unsigned long ulStatus) +{ + // + // Check the arguments. + // + ASSERT((ulBase == ADC0_BASE) || (ulBase == ADC1_BASE)); + + // + // Clear the interrupt. + // + HWREG(ulBase + ADC_O_DCISC) = ulStatus; +} + +//***************************************************************************** +// +//! Selects the ADC reference. +//! +//! \param ulBase is the base address of the ADC module. +//! \param ulRef is the reference to use. +//! +//! The ADC reference is set as specified by \e ulRef. It must be one of +//! \b ADC_REF_INT or \b ADC_REF_EXT_3V, for internal or external reference. +//! If \b ADC_REF_INT is chosen, then an internal 3V reference is used and +//! no external reference is needed. If \b ADC_REF_EXT_3V is chosen, then a 3V +//! reference must be supplied to the AVREF pin. +//! +//! \note The ADC reference can only be selected on parts that have an external +//! reference. Consult the data sheet for your part to determine if there is +//! an external reference. +//! +//! \return None. +// +//***************************************************************************** +void +ADCReferenceSet(unsigned long ulBase, unsigned long ulRef) +{ + // + // Check the arguments. + // + ASSERT((ulBase == ADC0_BASE) || (ulBase == ADC1_BASE)); + ASSERT((ulRef == ADC_REF_INT) || (ulRef == ADC_REF_EXT_3V)); + + // + // Set the reference. + // + HWREG(ulBase + ADC_O_CTL) = (HWREG(ulBase + ADC_O_CTL) & ~ADC_CTL_VREF) | + ulRef; +} + +//***************************************************************************** +// +//! Returns the current setting of the ADC reference. +//! +//! \param ulBase is the base address of the ADC module. +//! +//! Returns the value of the ADC reference setting. The returned value will be +//! one of \b ADC_REF_INT or \b ADC_REF_EXT_3V. +//! +//! \note The value returned by this function is only meaningful if used on a +//! part that is capable of using an external reference. Consult the data +//! sheet for your part to determine if it has an external reference input. +//! +//! \return The current setting of the ADC reference. +// +//***************************************************************************** +unsigned long +ADCReferenceGet(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == ADC0_BASE) || (ulBase == ADC1_BASE)); + + // + // Return the value of the reference. + // + return(HWREG(ulBase + ADC_O_CTL) & ADC_CTL_VREF); +} + +//***************************************************************************** +// +//! Sets the phase delay between a trigger and the start of a sequence. +//! +//! \param ulBase is the base address of the ADC module. +//! \param ulPhase is the phase delay, specified as one of \b ADC_PHASE_0, +//! \b ADC_PHASE_22_5, \b ADC_PHASE_45, \b ADC_PHASE_67_5, \b ADC_PHASE_90, +//! \b ADC_PHASE_112_5, \b ADC_PHASE_135, \b ADC_PHASE_157_5, \b ADC_PHASE_180, +//! \b ADC_PHASE_202_5, \b ADC_PHASE_225, \b ADC_PHASE_247_5, \b ADC_PHASE_270, +//! \b ADC_PHASE_292_5, \b ADC_PHASE_315, or \b ADC_PHASE_337_5. +//! +//! This function sets the phase delay between the detection of an ADC trigger +//! event and the start of the sample sequence. By selecting a different phase +//! delay for a pair of ADC modules (such as \b ADC_PHASE_0 and +//! \b ADC_PHASE_180) and having each ADC module sample the same analog input, +//! it is possible to increase the sampling rate of the analog input (with +//! samples N, N+2, N+4, and so on, coming from the first ADC and samples N+1, +//! N+3, N+5, and so on, coming from the second ADC). The ADC module has a +//! single phase delay that is applied to all sample sequences within that +//! module. +//! +//! \note This capability is not available on all parts. +//! +//! \return None. +// +//***************************************************************************** +void +ADCPhaseDelaySet(unsigned long ulBase, unsigned long ulPhase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == ADC0_BASE) || (ulBase == ADC1_BASE)); + ASSERT((ulPhase == ADC_PHASE_0) || (ulPhase == ADC_PHASE_22_5) || + (ulPhase == ADC_PHASE_45) || (ulPhase == ADC_PHASE_67_5) || + (ulPhase == ADC_PHASE_90) || (ulPhase == ADC_PHASE_112_5) || + (ulPhase == ADC_PHASE_135) || (ulPhase == ADC_PHASE_157_5) || + (ulPhase == ADC_PHASE_180) || (ulPhase == ADC_PHASE_202_5) || + (ulPhase == ADC_PHASE_225) || (ulPhase == ADC_PHASE_247_5) || + (ulPhase == ADC_PHASE_270) || (ulPhase == ADC_PHASE_292_5) || + (ulPhase == ADC_PHASE_315) || (ulPhase == ADC_PHASE_337_5)); + + // + // Set the phase delay. + // + HWREG(ulBase + ADC_O_SPC) = ulPhase; +} + +//***************************************************************************** +// +//! Gets the phase delay between a trigger and the start of a sequence. +//! +//! \param ulBase is the base address of the ADC module. +//! +//! This function gets the current phase delay between the detection of an ADC +//! trigger event and the start of the sample sequence. +//! +//! \return Returns the phase delay, specified as one of \b ADC_PHASE_0, +//! \b ADC_PHASE_22_5, \b ADC_PHASE_45, \b ADC_PHASE_67_5, \b ADC_PHASE_90, +//! \b ADC_PHASE_112_5, \b ADC_PHASE_135, \b ADC_PHASE_157_5, \b ADC_PHASE_180, +//! \b ADC_PHASE_202_5, \b ADC_PHASE_225, \b ADC_PHASE_247_5, \b ADC_PHASE_270, +//! \b ADC_PHASE_292_5, \b ADC_PHASE_315, or \b ADC_PHASE_337_5. +// +//***************************************************************************** +unsigned long +ADCPhaseDelayGet(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == ADC0_BASE) || (ulBase == ADC1_BASE)); + + // + // Return the phase delay. + // + return(HWREG(ulBase + ADC_O_SPC)); +} + +//***************************************************************************** +// +// Close the Doxygen group. +//! @} +// +//***************************************************************************** diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/adc.h b/bsp/lm3s_9b9x/Libraries/driverlib/adc.h new file mode 100644 index 0000000000000000000000000000000000000000..4b70cf97d1f7395be5e483404fa44705ede6a065 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/adc.h @@ -0,0 +1,258 @@ +//***************************************************************************** +// +// adc.h - ADC headers for using the ADC driver functions. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +#ifndef __ADC_H__ +#define __ADC_H__ + +//***************************************************************************** +// +// If building with a C++ compiler, make all of the definitions in this header +// have a C binding. +// +//***************************************************************************** +#ifdef __cplusplus +extern "C" +{ +#endif + +//***************************************************************************** +// +// Values that can be passed to ADCSequenceConfigure as the ulTrigger +// parameter. +// +//***************************************************************************** +#define ADC_TRIGGER_PROCESSOR 0x00000000 // Processor event +#define ADC_TRIGGER_COMP0 0x00000001 // Analog comparator 0 event +#define ADC_TRIGGER_COMP1 0x00000002 // Analog comparator 1 event +#define ADC_TRIGGER_COMP2 0x00000003 // Analog comparator 2 event +#define ADC_TRIGGER_EXTERNAL 0x00000004 // External event +#define ADC_TRIGGER_TIMER 0x00000005 // Timer event +#define ADC_TRIGGER_PWM0 0x00000006 // PWM0 event +#define ADC_TRIGGER_PWM1 0x00000007 // PWM1 event +#define ADC_TRIGGER_PWM2 0x00000008 // PWM2 event +#define ADC_TRIGGER_PWM3 0x00000009 // PWM3 event +#define ADC_TRIGGER_ALWAYS 0x0000000F // Always event + +//***************************************************************************** +// +// Values that can be passed to ADCSequenceStepConfigure as the ulConfig +// parameter. +// +//***************************************************************************** +#define ADC_CTL_TS 0x00000080 // Temperature sensor select +#define ADC_CTL_IE 0x00000040 // Interrupt enable +#define ADC_CTL_END 0x00000020 // Sequence end select +#define ADC_CTL_D 0x00000010 // Differential select +#define ADC_CTL_CH0 0x00000000 // Input channel 0 +#define ADC_CTL_CH1 0x00000001 // Input channel 1 +#define ADC_CTL_CH2 0x00000002 // Input channel 2 +#define ADC_CTL_CH3 0x00000003 // Input channel 3 +#define ADC_CTL_CH4 0x00000004 // Input channel 4 +#define ADC_CTL_CH5 0x00000005 // Input channel 5 +#define ADC_CTL_CH6 0x00000006 // Input channel 6 +#define ADC_CTL_CH7 0x00000007 // Input channel 7 +#define ADC_CTL_CH8 0x00000008 // Input channel 8 +#define ADC_CTL_CH9 0x00000009 // Input channel 9 +#define ADC_CTL_CH10 0x0000000A // Input channel 10 +#define ADC_CTL_CH11 0x0000000B // Input channel 11 +#define ADC_CTL_CH12 0x0000000C // Input channel 12 +#define ADC_CTL_CH13 0x0000000D // Input channel 13 +#define ADC_CTL_CH14 0x0000000E // Input channel 14 +#define ADC_CTL_CH15 0x0000000F // Input channel 15 +#define ADC_CTL_CMP0 0x00080000 // Select Comparator 0 +#define ADC_CTL_CMP1 0x00090000 // Select Comparator 1 +#define ADC_CTL_CMP2 0x000A0000 // Select Comparator 2 +#define ADC_CTL_CMP3 0x000B0000 // Select Comparator 3 +#define ADC_CTL_CMP4 0x000C0000 // Select Comparator 4 +#define ADC_CTL_CMP5 0x000D0000 // Select Comparator 5 +#define ADC_CTL_CMP6 0x000E0000 // Select Comparator 6 +#define ADC_CTL_CMP7 0x000F0000 // Select Comparator 7 + +//***************************************************************************** +// +// Values that can be passed to ADCComparatorConfigure as part of the +// ulConfig parameter. +// +//***************************************************************************** +#define ADC_COMP_TRIG_NONE 0x00000000 // Trigger Disabled +#define ADC_COMP_TRIG_LOW_ALWAYS \ + 0x00001000 // Trigger Low Always +#define ADC_COMP_TRIG_LOW_ONCE 0x00001100 // Trigger Low Once +#define ADC_COMP_TRIG_LOW_HALWAYS \ + 0x00001200 // Trigger Low Always (Hysteresis) +#define ADC_COMP_TRIG_LOW_HONCE 0x00001300 // Trigger Low Once (Hysteresis) +#define ADC_COMP_TRIG_MID_ALWAYS \ + 0x00001400 // Trigger Mid Always +#define ADC_COMP_TRIG_MID_ONCE 0x00001500 // Trigger Mid Once +#define ADC_COMP_TRIG_HIGH_ALWAYS \ + 0x00001C00 // Trigger High Always +#define ADC_COMP_TRIG_HIGH_ONCE 0x00001D00 // Trigger High Once +#define ADC_COMP_TRIG_HIGH_HALWAYS \ + 0x00001E00 // Trigger High Always (Hysteresis) +#define ADC_COMP_TRIG_HIGH_HONCE \ + 0x00001F00 // Trigger High Once (Hysteresis) + +#define ADC_COMP_INT_NONE 0x00000000 // Interrupt Disabled +#define ADC_COMP_INT_LOW_ALWAYS \ + 0x00000010 // Interrupt Low Always +#define ADC_COMP_INT_LOW_ONCE 0x00000011 // Interrupt Low Once +#define ADC_COMP_INT_LOW_HALWAYS \ + 0x00000012 // Interrupt Low Always + // (Hysteresis) +#define ADC_COMP_INT_LOW_HONCE 0x00000013 // Interrupt Low Once (Hysteresis) +#define ADC_COMP_INT_MID_ALWAYS \ + 0x00000014 // Interrupt Mid Always +#define ADC_COMP_INT_MID_ONCE 0x00000015 // Interrupt Mid Once +#define ADC_COMP_INT_HIGH_ALWAYS \ + 0x0000001C // Interrupt High Always +#define ADC_COMP_INT_HIGH_ONCE 0x0000001D // Interrupt High Once +#define ADC_COMP_INT_HIGH_HALWAYS \ + 0x0000001E // Interrupt High Always + // (Hysteresis) +#define ADC_COMP_INT_HIGH_HONCE \ + 0x0000001F // Interrupt High Once (Hysteresis) + +//***************************************************************************** +// +// Values that can be used to modify the sequence number passed to +// ADCProcessorTrigger in order to get cross-module synchronous processor +// triggers. +// +//***************************************************************************** +#define ADC_TRIGGER_WAIT 0x08000000 // Wait for the synchronous trigger +#define ADC_TRIGGER_SIGNAL 0x80000000 // Signal the synchronous trigger + +//***************************************************************************** +// +// Values that can be passed to ADCPhaseDelaySet as the ulPhase parameter and +// returned from ADCPhaseDelayGet. +// +//***************************************************************************** +#define ADC_PHASE_0 0x00000000 // 0 degrees +#define ADC_PHASE_22_5 0x00000001 // 22.5 degrees +#define ADC_PHASE_45 0x00000002 // 45 degrees +#define ADC_PHASE_67_5 0x00000003 // 67.5 degrees +#define ADC_PHASE_90 0x00000004 // 90 degrees +#define ADC_PHASE_112_5 0x00000005 // 112.5 degrees +#define ADC_PHASE_135 0x00000006 // 135 degrees +#define ADC_PHASE_157_5 0x00000007 // 157.5 degrees +#define ADC_PHASE_180 0x00000008 // 180 degrees +#define ADC_PHASE_202_5 0x00000009 // 202.5 degrees +#define ADC_PHASE_225 0x0000000A // 225 degrees +#define ADC_PHASE_247_5 0x0000000B // 247.5 degrees +#define ADC_PHASE_270 0x0000000C // 270 degrees +#define ADC_PHASE_292_5 0x0000000D // 292.5 degrees +#define ADC_PHASE_315 0x0000000E // 315 degrees +#define ADC_PHASE_337_5 0x0000000F // 337.5 degrees + +//***************************************************************************** +// +// Values that can be passed to ADCReferenceSet as the ulRef parameter. +// +//***************************************************************************** +#define ADC_REF_INT 0x00000000 // Internal reference +#define ADC_REF_EXT_3V 0x00000001 // External 3V reference + +//***************************************************************************** +// +// Prototypes for the APIs. +// +//***************************************************************************** +extern void ADCIntRegister(unsigned long ulBase, unsigned long ulSequenceNum, + void (*pfnHandler)(void)); +extern void ADCIntUnregister(unsigned long ulBase, + unsigned long ulSequenceNum); +extern void ADCIntDisable(unsigned long ulBase, unsigned long ulSequenceNum); +extern void ADCIntEnable(unsigned long ulBase, unsigned long ulSequenceNum); +extern unsigned long ADCIntStatus(unsigned long ulBase, + unsigned long ulSequenceNum, + tBoolean bMasked); +extern void ADCIntClear(unsigned long ulBase, unsigned long ulSequenceNum); +extern void ADCSequenceEnable(unsigned long ulBase, + unsigned long ulSequenceNum); +extern void ADCSequenceDisable(unsigned long ulBase, + unsigned long ulSequenceNum); +extern void ADCSequenceConfigure(unsigned long ulBase, + unsigned long ulSequenceNum, + unsigned long ulTrigger, + unsigned long ulPriority); +extern void ADCSequenceStepConfigure(unsigned long ulBase, + unsigned long ulSequenceNum, + unsigned long ulStep, + unsigned long ulConfig); +extern long ADCSequenceOverflow(unsigned long ulBase, + unsigned long ulSequenceNum); +extern void ADCSequenceOverflowClear(unsigned long ulBase, + unsigned long ulSequenceNum); +extern long ADCSequenceUnderflow(unsigned long ulBase, + unsigned long ulSequenceNum); +extern void ADCSequenceUnderflowClear(unsigned long ulBase, + unsigned long ulSequenceNum); +extern long ADCSequenceDataGet(unsigned long ulBase, + unsigned long ulSequenceNum, + unsigned long *pulBuffer); +extern void ADCProcessorTrigger(unsigned long ulBase, + unsigned long ulSequenceNum); +extern void ADCSoftwareOversampleConfigure(unsigned long ulBase, + unsigned long ulSequenceNum, + unsigned long ulFactor); +extern void ADCSoftwareOversampleStepConfigure(unsigned long ulBase, + unsigned long ulSequenceNum, + unsigned long ulStep, + unsigned long ulConfig); +extern void ADCSoftwareOversampleDataGet(unsigned long ulBase, + unsigned long ulSequenceNum, + unsigned long *pulBuffer, + unsigned long ulCount); +extern void ADCHardwareOversampleConfigure(unsigned long ulBase, + unsigned long ulFactor); +extern void ADCComparatorConfigure(unsigned long ulBase, unsigned long ulComp, + unsigned long ulConfig); +extern void ADCComparatorRegionSet(unsigned long ulBase, unsigned long ulComp, + unsigned long ulLowRef, + unsigned long ulHighRef); +extern void ADCComparatorReset(unsigned long ulBase, unsigned long ulComp, + tBoolean bTrigger, tBoolean bInterrupt); +extern void ADCComparatorIntDisable(unsigned long ulBase, + unsigned long ulSequenceNum); +extern void ADCComparatorIntEnable(unsigned long ulBase, + unsigned long ulSequenceNum); +extern unsigned long ADCComparatorIntStatus(unsigned long ulBase); +extern void ADCComparatorIntClear(unsigned long ulBase, + unsigned long ulStatus); +extern void ADCReferenceSet(unsigned long ulBase, unsigned long ulRef); +extern unsigned long ADCReferenceGet(unsigned long ulBase); +extern void ADCPhaseDelaySet(unsigned long ulBase, unsigned long ulPhase); +extern unsigned long ADCPhaseDelayGet(unsigned long ulBase); + +//***************************************************************************** +// +// Mark the end of the C bindings section for C++ compilers. +// +//***************************************************************************** +#ifdef __cplusplus +} +#endif + +#endif // __ADC_H__ diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/can.c b/bsp/lm3s_9b9x/Libraries/driverlib/can.c new file mode 100644 index 0000000000000000000000000000000000000000..6acb1193c74644ff4481f3a5b523b2747b39b04f --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/can.c @@ -0,0 +1,2250 @@ +//***************************************************************************** +// +// can.c - Driver for the CAN module. +// +// Copyright (c) 2006-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +//***************************************************************************** +// +//! \addtogroup can_api +//! @{ +// +//***************************************************************************** + +#include "inc/hw_can.h" +#include "inc/hw_ints.h" +#include "inc/hw_nvic.h" +#include "inc/hw_memmap.h" +#include "inc/hw_types.h" +#include "driverlib/can.h" +#include "driverlib/debug.h" +#include "driverlib/interrupt.h" + +//***************************************************************************** +// +// This is the maximum number that can be stored as an 11bit Message +// identifier. +// +//***************************************************************************** +#define CAN_MAX_11BIT_MSG_ID 0x7ff + +//***************************************************************************** +// +// This is used as the loop delay for accessing the CAN controller registers. +// +//***************************************************************************** +#define CAN_RW_DELAY 5 + +//***************************************************************************** +// +// The maximum CAN bit timing divisor is 19. +// +//***************************************************************************** +#define CAN_MAX_BIT_DIVISOR 19 + +//***************************************************************************** +// +// The minimum CAN bit timing divisor is 4. +// +//***************************************************************************** +#define CAN_MIN_BIT_DIVISOR 4 + +//***************************************************************************** +// +// The maximum CAN pre-divisor is 1024. +// +//***************************************************************************** +#define CAN_MAX_PRE_DIVISOR 1024 + +//***************************************************************************** +// +// The minimum CAN pre-divisor is 1. +// +//***************************************************************************** +#define CAN_MIN_PRE_DIVISOR 1 + +//***************************************************************************** +// +// Converts a set of CAN bit timing values into the value that needs to be +// programmed into the CAN_BIT register to achieve those timings. +// +//***************************************************************************** +#define CAN_BIT_VALUE(seg1, seg2, sjw) \ + ((((seg1 - 1) << CAN_BIT_TSEG1_S) & \ + CAN_BIT_TSEG1_M) | \ + (((seg2 - 1) << CAN_BIT_TSEG2_S) & \ + CAN_BIT_TSEG2_M) | \ + (((sjw - 1) << CAN_BIT_SJW_S) & \ + CAN_BIT_SJW_M)) + +//***************************************************************************** +// +// This table is used by the CANBitRateSet() API as the register defaults for +// the bit timing values. +// +//***************************************************************************** +static const unsigned short g_usCANBitValues[] = +{ + CAN_BIT_VALUE(2, 1, 1), // 4 clocks/bit + CAN_BIT_VALUE(3, 1, 1), // 5 clocks/bit + CAN_BIT_VALUE(3, 2, 2), // 6 clocks/bit + CAN_BIT_VALUE(4, 2, 2), // 7 clocks/bit + CAN_BIT_VALUE(4, 3, 3), // 8 clocks/bit + CAN_BIT_VALUE(5, 3, 3), // 9 clocks/bit + CAN_BIT_VALUE(5, 4, 4), // 10 clocks/bit + CAN_BIT_VALUE(6, 4, 4), // 11 clocks/bit + CAN_BIT_VALUE(6, 5, 4), // 12 clocks/bit + CAN_BIT_VALUE(7, 5, 4), // 13 clocks/bit + CAN_BIT_VALUE(7, 6, 4), // 14 clocks/bit + CAN_BIT_VALUE(8, 6, 4), // 15 clocks/bit + CAN_BIT_VALUE(8, 7, 4), // 16 clocks/bit + CAN_BIT_VALUE(9, 7, 4), // 17 clocks/bit + CAN_BIT_VALUE(9, 8, 4), // 18 clocks/bit + CAN_BIT_VALUE(10, 8, 4) // 19 clocks/bit +}; + +//***************************************************************************** +// +//! \internal +//! Checks a CAN base address. +//! +//! \param ulBase is the base address of the CAN controller. +//! +//! This function determines if a CAN controller base address is valid. +//! +//! \return Returns \b true if the base address is valid and \b false +//! otherwise. +// +//***************************************************************************** +#ifdef DEBUG +static tBoolean +CANBaseValid(unsigned long ulBase) +{ + return((ulBase == CAN0_BASE) || (ulBase == CAN1_BASE) || + (ulBase == CAN2_BASE)); +} +#endif + +//***************************************************************************** +// +//! \internal +//! +//! Returns the CAN controller interrupt number. +//! +//! \param ulBase is the base address of the selected CAN controller +//! +//! Given a CAN controller base address, returns the corresponding interrupt +//! number. +//! +//! This function replaces the original CANGetIntNumber() API and performs the +//! same actions. A macro is provided in can.h to map the original +//! API to this API. +//! +//! \return Returns a CAN interrupt number, or -1 if \e ulPort is invalid. +// +//***************************************************************************** +static long +CANIntNumberGet(unsigned long ulBase) +{ + long lIntNumber; + + // + // Return the interrupt number for the given CAN controller. + // + switch(ulBase) + { + // + // Return the interrupt number for CAN 0 + // + case CAN0_BASE: + { + lIntNumber = INT_CAN0; + break; + } + + // + // Return the interrupt number for CAN 1 + // + case CAN1_BASE: + { + lIntNumber = INT_CAN1; + break; + } + + // + // Return the interrupt number for CAN 2 + // + case CAN2_BASE: + { + lIntNumber = INT_CAN2; + break; + } + + // + // Return -1 to indicate a bad address was passed in. + // + default: + { + lIntNumber = -1; + } + } + return(lIntNumber); +} + +//***************************************************************************** +// +//! \internal +//! +//! Reads a CAN controller register. +//! +//! \param ulRegAddress is the full address of the CAN register to be read. +//! +//! This function performs the necessary synchronization to read from a CAN +//! controller register. +//! +//! This function replaces the original CANReadReg() API and performs the same +//! actions. A macro is provided in can.h to map the original API to +//! this API. +//! +//! \note This function provides the delay required to access CAN registers. +//! This delay is required when accessing CAN registers directly. +//! +//! \return Returns the value read from the register. +// +//***************************************************************************** +static unsigned long +CANRegRead(unsigned long ulRegAddress) +{ + volatile int iDelay; + unsigned long ulRetVal; + unsigned long ulIntNumber; + unsigned long ulReenableInts; + + // + // Get the CAN interrupt number from the register base address. + // + ulIntNumber = CANIntNumberGet(ulRegAddress & 0xfffff000); + + // + // Make sure that the CAN base address was valid. + // + ASSERT(ulIntNumber != (unsigned long)-1); + + // + // Remember current state so that CAN interrupts are only re-enabled if + // they were already enabled. + // + ulReenableInts = HWREG(NVIC_EN1) & (1 << (ulIntNumber - 48)); + + // + // If the CAN interrupt was enabled then disable it. + // + if(ulReenableInts) + { + IntDisable(ulIntNumber); + } + + // + // Trigger the initial read to the CAN controller. The value returned at + // this point is not valid. + // + HWREG(ulRegAddress); + + // + // This delay is necessary for the CAN have the correct data on the bus. + // + for(iDelay = 0; iDelay < CAN_RW_DELAY; iDelay++) + { + } + + // + // Do the final read that has the valid value of the register. + // + ulRetVal = HWREG(ulRegAddress); + + // + // Enable CAN interrupts if they were enabled before this call. + // + if(ulReenableInts) + { + IntEnable(ulIntNumber); + } + + return(ulRetVal); +} + +//***************************************************************************** +// +//! \internal +//! +//! Writes a CAN controller register. +//! +//! \param ulRegAddress is the full address of the CAN register to be written. +//! \param ulRegValue is the value to write into the register specified by +//! \e ulRegAddress. +//! +//! This function takes care of the synchronization necessary to write to a +//! CAN controller register. +//! +//! This function replaces the original CANWriteReg() API and performs the same +//! actions. A macro is provided in can.h to map the original API to +//! this API. +//! +//! \note The delays in this function are required when accessing CAN registers +//! directly. +//! +//! \return None. +// +//***************************************************************************** +static void +CANRegWrite(unsigned long ulRegAddress, unsigned long ulRegValue) +{ + volatile int iDelay; + + // + // Trigger the initial write to the CAN controller. The value will not make + // it out to the CAN controller for CAN_RW_DELAY cycles. + // + HWREG(ulRegAddress) = ulRegValue; + + // + // Delay to allow the CAN controller to receive the new data. + // + for(iDelay = 0; iDelay < CAN_RW_DELAY; iDelay++) + { + } +} + +//***************************************************************************** +// +//! \internal +//! +//! Copies data from a buffer to the CAN Data registers. +//! +//! \param pucData is a pointer to the data to be written out to the CAN +//! controller's data registers. +//! \param pulRegister is an unsigned long pointer to the first register of the +//! CAN controller's data registers. For example, in order to use the IF1 +//! register set on CAN controller 0, the value would be: \b CAN0_BASE \b + +//! \b CAN_O_IF1DA1. +//! \param iSize is the number of bytes to copy into the CAN controller. +//! +//! This function takes the steps necessary to copy data from a contiguous +//! buffer in memory into the non-contiguous data registers used by the CAN +//! controller. This function is rarely used outside of the CANMessageSet() +//! function. +//! +//! This function replaces the original CANWriteDataReg() API and performs the +//! same actions. A macro is provided in can.h to map the original +//! API to this API. +//! +//! \return None. +// +//***************************************************************************** +static void +CANDataRegWrite(unsigned char *pucData, unsigned long *pulRegister, int iSize) +{ + int iIdx; + unsigned long ulValue; + + // + // Loop always copies 1 or 2 bytes per iteration. + // + for(iIdx = 0; iIdx < iSize; ) + { + + // + // Write out the data 16 bits at a time since this is how the registers + // are aligned in memory. + // + ulValue = pucData[iIdx++]; + + // + // Only write the second byte if needed otherwise it will be zero. + // + if(iIdx < iSize) + { + ulValue |= (pucData[iIdx++] << 8); + } + CANRegWrite((unsigned long)(pulRegister++), ulValue); + } +} + +//***************************************************************************** +// +//! \internal +//! +//! Copies data from a buffer to the CAN Data registers. +//! +//! \param pucData is a pointer to the location to store the data read from the +//! CAN controller's data registers. +//! \param pulRegister is an unsigned long pointer to the first register of the +//! CAN controller's data registers. For example, in order to use the IF1 +//! register set on CAN controller 1, the value would be: \b CAN0_BASE \b + +//! \b CAN_O_IF1DA1. +//! \param iSize is the number of bytes to copy from the CAN controller. +//! +//! This function takes the steps necessary to copy data to a contiguous buffer +//! in memory from the non-contiguous data registers used by the CAN +//! controller. This function is rarely used outside of the CANMessageGet() +//! function. +//! +//! This function replaces the original CANReadDataReg() API and performs the +//! same actions. A macro is provided in can.h to map the original +//! API to this API. +//! +//! \return None. +// +//***************************************************************************** +static void +CANDataRegRead(unsigned char *pucData, unsigned long *pulRegister, int iSize) +{ + int iIdx; + unsigned long ulValue; + + // + // Loop always copies 1 or 2 bytes per iteration. + // + for(iIdx = 0; iIdx < iSize; ) + { + // + // Read out the data 16 bits at a time since this is how the registers + // are aligned in memory. + // + ulValue = CANRegRead((unsigned long)(pulRegister++)); + + // + // Store the first byte. + // + pucData[iIdx++] = (unsigned char)ulValue; + + // + // Only read the second byte if needed. + // + if(iIdx < iSize) + { + pucData[iIdx++] = (unsigned char)(ulValue >> 8); + } + } +} + +//***************************************************************************** +// +//! Initializes the CAN controller after reset. +//! +//! \param ulBase is the base address of the CAN controller. +//! +//! After reset, the CAN controller is left in the disabled state. However, +//! the memory used for message objects contains undefined values and must be +//! cleared prior to enabling the CAN controller the first time. This prevents +//! unwanted transmission or reception of data before the message objects are +//! configured. This function must be called before enabling the controller +//! the first time. +//! +//! \return None. +// +//***************************************************************************** +void +CANInit(unsigned long ulBase) +{ + int iMsg; + + // + // Check the arguments. + // + ASSERT(CANBaseValid(ulBase)); + + // + // Place CAN controller in init state, regardless of previous state. This + // will put controller in idle, and allow the message object RAM to be + // programmed. + // + CANRegWrite(ulBase + CAN_O_CTL, CAN_CTL_INIT); + + // + // Wait for busy bit to clear + // + while(CANRegRead(ulBase + CAN_O_IF1CRQ) & CAN_IF1CRQ_BUSY) + { + } + + // + // Clear the message value bit in the arbitration register. This indicates + // the message is not valid and is a "safe" condition to leave the message + // object. The same arb reg is used to program all the message objects. + // + CANRegWrite(ulBase + CAN_O_IF1CMSK, CAN_IF1CMSK_WRNRD | CAN_IF1CMSK_ARB | + CAN_IF1CMSK_CONTROL); + CANRegWrite(ulBase + CAN_O_IF1ARB2, 0); + CANRegWrite(ulBase + CAN_O_IF1MCTL, 0); + + // + // Loop through to program all 32 message objects + // + for(iMsg = 1; iMsg <= 32; iMsg++) + { + // + // Wait for busy bit to clear + // + while(CANRegRead(ulBase + CAN_O_IF1CRQ) & CAN_IF1CRQ_BUSY) + { + } + + // + // Initiate programming the message object + // + CANRegWrite(ulBase + CAN_O_IF1CRQ, iMsg); + } + + // + // Make sure that the interrupt and new data flags are updated for the + // message objects. + // + CANRegWrite(ulBase + CAN_O_IF1CMSK, CAN_IF1CMSK_NEWDAT | + CAN_IF1CMSK_CLRINTPND); + + // + // Loop through to program all 32 message objects + // + for(iMsg = 1; iMsg <= 32; iMsg++) + { + // + // Wait for busy bit to clear. + // + while(CANRegRead(ulBase + CAN_O_IF1CRQ) & CAN_IF1CRQ_BUSY) + { + } + + // + // Initiate programming the message object + // + CANRegWrite(ulBase + CAN_O_IF1CRQ, iMsg); + } + + // + // Acknowledge any pending status interrupts. + // + CANRegRead(ulBase + CAN_O_STS); +} + +//***************************************************************************** +// +//! Enables the CAN controller. +//! +//! \param ulBase is the base address of the CAN controller to enable. +//! +//! Enables the CAN controller for message processing. Once enabled, the +//! controller will automatically transmit any pending frames, and process any +//! received frames. The controller can be stopped by calling CANDisable(). +//! Prior to calling CANEnable(), CANInit() should have been called to +//! initialize the controller and the CAN bus clock should be configured by +//! calling CANBitTimingSet(). +//! +//! \return None. +// +//***************************************************************************** +void +CANEnable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(CANBaseValid(ulBase)); + + // + // Clear the init bit in the control register. + // + CANRegWrite(ulBase + CAN_O_CTL, + CANRegRead(ulBase + CAN_O_CTL) & ~CAN_CTL_INIT); +} + +//***************************************************************************** +// +//! Disables the CAN controller. +//! +//! \param ulBase is the base address of the CAN controller to disable. +//! +//! Disables the CAN controller for message processing. When disabled, the +//! controller will no longer automatically process data on the CAN bus. The +//! controller can be restarted by calling CANEnable(). The state of the CAN +//! controller and the message objects in the controller are left as they were +//! before this call was made. +//! +//! \return None. +// +//***************************************************************************** +void +CANDisable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(CANBaseValid(ulBase)); + + // + // Set the init bit in the control register. + // + CANRegWrite(ulBase + CAN_O_CTL, + CANRegRead(ulBase + CAN_O_CTL) | CAN_CTL_INIT); +} + +//***************************************************************************** +// +//! Reads the current settings for the CAN controller bit timing. +//! +//! \param ulBase is the base address of the CAN controller. +//! \param pClkParms is a pointer to a structure to hold the timing parameters. +//! +//! This function reads the current configuration of the CAN controller bit +//! clock timing, and stores the resulting information in the structure +//! supplied by the caller. Refer to CANBitTimingSet() for the meaning of the +//! values that are returned in the structure pointed to by \e pClkParms. +//! +//! This function replaces the original CANGetBitTiming() API and performs the +//! same actions. A macro is provided in can.h to map the original +//! API to this API. +//! +//! \return None. +// +//***************************************************************************** +void +CANBitTimingGet(unsigned long ulBase, tCANBitClkParms *pClkParms) +{ + unsigned int uBitReg; + + // + // Check the arguments. + // + ASSERT(CANBaseValid(ulBase)); + ASSERT(pClkParms != 0); + + // + // Read out all the bit timing values from the CAN controller registers. + // + uBitReg = CANRegRead(ulBase + CAN_O_BIT); + + // + // Set the phase 2 segment. + // + pClkParms->uPhase2Seg = + ((uBitReg & CAN_BIT_TSEG2_M) >> CAN_BIT_TSEG2_S) + 1; + + // + // Set the phase 1 segment. + // + pClkParms->uSyncPropPhase1Seg = + ((uBitReg & CAN_BIT_TSEG1_M) >> CAN_BIT_TSEG1_S) + 1; + + // + // Set the synchronous jump width. + // + pClkParms->uSJW = ((uBitReg & CAN_BIT_SJW_M) >> CAN_BIT_SJW_S) + 1; + + // + // Set the pre-divider for the CAN bus bit clock. + // + pClkParms->uQuantumPrescaler = + ((uBitReg & CAN_BIT_BRP_M) | + ((CANRegRead(ulBase + CAN_O_BRPE) & CAN_BRPE_BRPE_M) << 6)) + 1; +} + +//***************************************************************************** +// +//! This function is used to set the CAN bit timing values to a nominal setting +//! based on a desired bit rate. +//! +//! \param ulBase is the base address of the CAN controller. +//! \param ulSourceClock is the system clock for the device in Hz. +//! \param ulBitRate is the desired bit rate. +//! +//! This function will set the CAN bit timing for the bit rate passed in the +//! \e ulBitRate parameter based on the \e ulSourceClock parameter. Since the +//! CAN clock is based off of the system clock the calling function should pass +//! in the source clock rate either by retrieving it from SysCtlClockGet() or +//! using a specific value in Hz. The CAN bit timing is calculated assuming a +//! minimal amount of propagation delay, which will work for most cases where +//! the network length is short. If tighter timing requirements or longer +//! network lengths are needed, then the CANBitTimingSet() function is +//! available for full customization of all of the CAN bit timing values. +//! Since not all bit rates can be matched exactly, the bit rate is set to the +//! value closest to the desired bit rate without being higher than the +//! \e ulBitRate value. +//! +//! \note On some devices the source clock is fixed at 8MHz so the +//! \e ulSourceClock should be set to 8000000. +//! +//! \return This function returns the bit rate that the CAN controller was +//! configured to use or it returns 0 to indicate that the bit rate was not +//! changed because the requested bit rate was not valid. +//! +//***************************************************************************** +unsigned long +CANBitRateSet(unsigned long ulBase, unsigned long ulSourceClock, + unsigned long ulBitRate) +{ + unsigned long ulDesiredRatio; + unsigned long ulCANBits; + unsigned long ulPreDivide; + unsigned long ulRegValue; + unsigned short usCANCTL; + + // + // Check the arguments. + // + ASSERT(CANBaseValid(ulBase)); + ASSERT(ulSourceClock != 0); + ASSERT(ulBitRate != 0); + + // + // Calculate the desired clock rate. + // + ulDesiredRatio = ulSourceClock / ulBitRate; + + // + // Make sure that the ratio of CAN bit rate to processor clock is not too + // small or too large. + // + ASSERT(ulDesiredRatio <= (CAN_MAX_PRE_DIVISOR * CAN_MAX_BIT_DIVISOR)); + ASSERT(ulDesiredRatio >= (CAN_MIN_PRE_DIVISOR * CAN_MIN_BIT_DIVISOR)); + + // + // Make sure that the Desired Ratio is not too large. This enforces the + // requirement that the bit rate is larger than requested. + // + if((ulSourceClock / ulDesiredRatio) > ulBitRate) + { + ulDesiredRatio += 1; + } + + // + // Check all possible values to find a matching value. + // + while(ulDesiredRatio <= (CAN_MAX_PRE_DIVISOR * CAN_MAX_BIT_DIVISOR)) + { + // + // Loop through all possible CAN bit divisors. + // + for(ulCANBits = CAN_MAX_BIT_DIVISOR; ulCANBits >= CAN_MIN_BIT_DIVISOR; + ulCANBits--) + { + // + // For a given CAN bit divisor save the pre divisor. + // + ulPreDivide = ulDesiredRatio / ulCANBits; + + // + // If the calculated divisors match the desired clock ratio then + // return these bit rate and set the CAN bit timing. + // + if((ulPreDivide * ulCANBits) == ulDesiredRatio) + { + // + // Start building the bit timing value by adding the bit timing + // in time quanta. + // + ulRegValue = g_usCANBitValues[ulCANBits - CAN_MIN_BIT_DIVISOR]; + + // + // To set the bit timing register, the controller must be placed + // in init mode (if not already), and also configuration change + // bit enabled. The state of the register should be saved + // so it can be restored. + // + usCANCTL = CANRegRead(ulBase + CAN_O_CTL); + CANRegWrite(ulBase + CAN_O_CTL, + usCANCTL | CAN_CTL_INIT | CAN_CTL_CCE); + + // + // Now add in the pre-scalar on the bit rate. + // + ulRegValue |= ((ulPreDivide - 1) & CAN_BIT_BRP_M); + + // + // Set the clock bits in the and the lower bits of the + // pre-scalar. + // + CANRegWrite(ulBase + CAN_O_BIT, ulRegValue); + + // + // Set the divider upper bits in the extension register. + // + CANRegWrite(ulBase + CAN_O_BRPE, + ((ulPreDivide - 1) >> 6) & CAN_BRPE_BRPE_M); + + // + // Restore the saved CAN Control register. + // + CANRegWrite(ulBase + CAN_O_CTL, usCANCTL); + + // + // Return the computed bit rate. + // + return(ulSourceClock / ( ulPreDivide * ulCANBits)); + } + } + + // + // Move the divisor up one and look again. Only in rare cases are + // more than 2 loops required to find the value. + // + ulDesiredRatio++; + } + + // + // A valid combination could not be found, so return 0 to indicate that the + // bit rate was not changed. + // + return(0); +} + +//***************************************************************************** +// +//! Configures the CAN controller bit timing. +//! +//! \param ulBase is the base address of the CAN controller. +//! \param pClkParms points to the structure with the clock parameters. +//! +//! Configures the various timing parameters for the CAN bus bit timing: +//! Propagation segment, Phase Buffer 1 segment, Phase Buffer 2 segment, and +//! the Synchronization Jump Width. The values for Propagation and Phase +//! Buffer 1 segments are derived from the combination +//! \e pClkParms->uSyncPropPhase1Seg parameter. Phase Buffer 2 is determined +//! from the \e pClkParms->uPhase2Seg parameter. These two parameters, along +//! with \e pClkParms->uSJW are based in units of bit time quanta. The actual +//! quantum time is determined by the \e pClkParms->uQuantumPrescaler value, +//! which specifies the divisor for the CAN module clock. +//! +//! The total bit time, in quanta, will be the sum of the two Seg parameters, +//! as follows: +//! +//! bit_time_q = uSyncPropPhase1Seg + uPhase2Seg + 1 +//! +//! Note that the Sync_Seg is always one quantum in duration, and will be added +//! to derive the correct duration of Prop_Seg and Phase1_Seg. +//! +//! The equation to determine the actual bit rate is as follows: +//! +//! CAN Clock / +//! ((\e uSyncPropPhase1Seg + \e uPhase2Seg + 1) * (\e uQuantumPrescaler)) +//! +//! This means that with \e uSyncPropPhase1Seg = 4, \e uPhase2Seg = 1, +//! \e uQuantumPrescaler = 2 and an 8 MHz CAN clock, that the bit rate will be +//! (8 MHz) / ((5 + 2 + 1) * 2) or 500 Kbit/sec. +//! +//! This function replaces the original CANSetBitTiming() API and performs the +//! same actions. A macro is provided in can.h to map the original +//! API to this API. +//! +//! \return None. +// +//***************************************************************************** +void +CANBitTimingSet(unsigned long ulBase, tCANBitClkParms *pClkParms) +{ + unsigned int uBitReg; + unsigned int uSavedInit; + + // + // Check the arguments. + // + ASSERT(CANBaseValid(ulBase)); + ASSERT(pClkParms != 0); + + // + // The phase 1 segment must be in the range from 2 to 16. + // + ASSERT((pClkParms->uSyncPropPhase1Seg >= 2) && + (pClkParms->uSyncPropPhase1Seg <= 16)); + + // + // The phase 2 segment must be in the range from 1 to 8. + // + ASSERT((pClkParms->uPhase2Seg >= 1) && (pClkParms->uPhase2Seg <= 8)); + + // + // The synchronous jump windows must be in the range from 1 to 4. + // + ASSERT((pClkParms->uSJW >= 1) && (pClkParms->uSJW <= 4)); + + // + // The CAN clock pre-divider must be in the range from 1 to 1024. + // + ASSERT((pClkParms->uQuantumPrescaler <= 1024) && + (pClkParms->uQuantumPrescaler >= 1)); + + // + // To set the bit timing register, the controller must be placed in init + // mode (if not already), and also configuration change bit enabled. State + // of the init bit should be saved so it can be restored at the end. + // + uSavedInit = CANRegRead(ulBase + CAN_O_CTL); + CANRegWrite(ulBase + CAN_O_CTL, uSavedInit | CAN_CTL_INIT | CAN_CTL_CCE); + + // + // Set the bit fields of the bit timing register according to the parms. + // + uBitReg = (((pClkParms->uPhase2Seg - 1) << CAN_BIT_TSEG2_S) & + CAN_BIT_TSEG2_M); + uBitReg |= (((pClkParms->uSyncPropPhase1Seg - 1) << CAN_BIT_TSEG1_S) & + CAN_BIT_TSEG1_M); + uBitReg |= ((pClkParms->uSJW - 1) << CAN_BIT_SJW_S) & CAN_BIT_SJW_M; + uBitReg |= (pClkParms->uQuantumPrescaler - 1) & CAN_BIT_BRP_M; + CANRegWrite(ulBase + CAN_O_BIT, uBitReg); + + // + // Set the divider upper bits in the extension register. + // + CANRegWrite(ulBase + CAN_O_BRPE, + ((pClkParms->uQuantumPrescaler - 1) >> 6) & CAN_BRPE_BRPE_M); + + // + // Clear the config change bit, and restore the init bit. + // + uSavedInit &= ~CAN_CTL_CCE; + + // + // If Init was not set before, then clear it. + // + if(uSavedInit & CAN_CTL_INIT) + { + uSavedInit &= ~CAN_CTL_INIT; + } + CANRegWrite(ulBase + CAN_O_CTL, uSavedInit); +} + +//***************************************************************************** +// +//! Registers an interrupt handler for the CAN controller. +//! +//! \param ulBase is the base address of the CAN controller. +//! \param pfnHandler is a pointer to the function to be called when the +//! enabled CAN interrupts occur. +//! +//! This function registers the interrupt handler in the interrupt vector +//! table, and enables CAN interrupts on the interrupt controller; specific CAN +//! interrupt sources must be enabled using CANIntEnable(). The interrupt +//! handler being registered must clear the source of the interrupt using +//! CANIntClear(). +//! +//! If the application is using a static interrupt vector table stored in +//! flash, then it is not necessary to register the interrupt handler this way. +//! Instead, IntEnable() should be used to enable CAN interrupts on the +//! interrupt controller. +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +CANIntRegister(unsigned long ulBase, void (*pfnHandler)(void)) +{ + unsigned long ulIntNumber; + + // + // Check the arguments. + // + ASSERT(CANBaseValid(ulBase)); + + // + // Get the actual interrupt number for this CAN controller. + // + ulIntNumber = CANIntNumberGet(ulBase); + + // + // Register the interrupt handler. + // + IntRegister(ulIntNumber, pfnHandler); + + // + // Enable the Ethernet interrupt. + // + IntEnable(ulIntNumber); +} + +//***************************************************************************** +// +//! Unregisters an interrupt handler for the CAN controller. +//! +//! \param ulBase is the base address of the controller. +//! +//! This function unregisters the previously registered interrupt handler and +//! disables the interrupt on the interrupt controller. +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +CANIntUnregister(unsigned long ulBase) +{ + unsigned long ulIntNumber; + + // + // Check the arguments. + // + ASSERT(CANBaseValid(ulBase)); + + // + // Get the actual interrupt number for this CAN controller. + // + ulIntNumber = CANIntNumberGet(ulBase); + + // + // Register the interrupt handler. + // + IntUnregister(ulIntNumber); + + // + // Disable the CAN interrupt. + // + IntDisable(ulIntNumber); +} + +//***************************************************************************** +// +//! Enables individual CAN controller interrupt sources. +//! +//! \param ulBase is the base address of the CAN controller. +//! \param ulIntFlags is the bit mask of the interrupt sources to be enabled. +//! +//! Enables specific interrupt sources of the CAN controller. Only enabled +//! sources will cause a processor interrupt. +//! +//! The \e ulIntFlags parameter is the logical OR of any of the following: +//! +//! - \b CAN_INT_ERROR - a controller error condition has occurred +//! - \b CAN_INT_STATUS - a message transfer has completed, or a bus error has +//! been detected +//! - \b CAN_INT_MASTER - allow CAN controller to generate interrupts +//! +//! In order to generate any interrupts, \b CAN_INT_MASTER must be enabled. +//! Further, for any particular transaction from a message object to generate +//! an interrupt, that message object must have interrupts enabled (see +//! CANMessageSet()). \b CAN_INT_ERROR will generate an interrupt if the +//! controller enters the ``bus off'' condition, or if the error counters reach +//! a limit. \b CAN_INT_STATUS will generate an interrupt under quite a few +//! status conditions and may provide more interrupts than the application +//! needs to handle. When an interrupt occurs, use CANIntStatus() to determine +//! the cause. +//! +//! \return None. +// +//***************************************************************************** +void +CANIntEnable(unsigned long ulBase, unsigned long ulIntFlags) +{ + // + // Check the arguments. + // + ASSERT(CANBaseValid(ulBase)); + ASSERT((ulIntFlags & ~(CAN_CTL_EIE | CAN_CTL_SIE | CAN_CTL_IE)) == 0); + + // + // Enable the specified interrupts. + // + CANRegWrite(ulBase + CAN_O_CTL, + CANRegRead(ulBase + CAN_O_CTL) | ulIntFlags); +} + +//***************************************************************************** +// +//! Disables individual CAN controller interrupt sources. +//! +//! \param ulBase is the base address of the CAN controller. +//! \param ulIntFlags is the bit mask of the interrupt sources to be disabled. +//! +//! Disables the specified CAN controller interrupt sources. Only enabled +//! interrupt sources can cause a processor interrupt. +//! +//! The \e ulIntFlags parameter has the same definition as in the +//! CANIntEnable() function. +//! +//! \return None. +// +//***************************************************************************** +void +CANIntDisable(unsigned long ulBase, unsigned long ulIntFlags) +{ + // + // Check the arguments. + // + ASSERT(CANBaseValid(ulBase)); + ASSERT((ulIntFlags & ~(CAN_CTL_EIE | CAN_CTL_SIE | CAN_CTL_IE)) == 0); + + // + // Disable the specified interrupts. + // + CANRegWrite(ulBase + CAN_O_CTL, + CANRegRead(ulBase + CAN_O_CTL) & ~(ulIntFlags)); +} + +//***************************************************************************** +// +//! Returns the current CAN controller interrupt status. +//! +//! \param ulBase is the base address of the CAN controller. +//! \param eIntStsReg indicates which interrupt status register to read +//! +//! Returns the value of one of two interrupt status registers. The interrupt +//! status register read is determined by the \e eIntStsReg parameter, which +//! can have one of the following values: +//! +//! - \b CAN_INT_STS_CAUSE - indicates the cause of the interrupt +//! - \b CAN_INT_STS_OBJECT - indicates pending interrupts of all message +//! objects +//! +//! \b CAN_INT_STS_CAUSE returns the value of the controller interrupt register +//! and indicates the cause of the interrupt. It will be a value of +//! \b CAN_INT_INTID_STATUS if the cause is a status interrupt. In this case, +//! the status register should be read with the CANStatusGet() function. +//! Calling this function to read the status will also clear the status +//! interrupt. If the value of the interrupt register is in the range 1-32, +//! then this indicates the number of the highest priority message object that +//! has an interrupt pending. The message object interrupt can be cleared by +//! using the CANIntClear() function, or by reading the message using +//! CANMessageGet() in the case of a received message. The interrupt handler +//! can read the interrupt status again to make sure all pending interrupts are +//! cleared before returning from the interrupt. +//! +//! \b CAN_INT_STS_OBJECT returns a bit mask indicating which message objects +//! have pending interrupts. This can be used to discover all of the pending +//! interrupts at once, as opposed to repeatedly reading the interrupt register +//! by using \b CAN_INT_STS_CAUSE. +//! +//! \return Returns the value of one of the interrupt status registers. +// +//***************************************************************************** +unsigned long +CANIntStatus(unsigned long ulBase, tCANIntStsReg eIntStsReg) +{ + unsigned long ulStatus; + + // + // Check the arguments. + // + ASSERT(CANBaseValid(ulBase)); + + // + // See which status the caller is looking for. + // + switch(eIntStsReg) + { + // + // The caller wants the global interrupt status for the CAN controller + // specified by ulBase. + // + case CAN_INT_STS_CAUSE: + { + ulStatus = CANRegRead(ulBase + CAN_O_INT); + break; + } + + // + // The caller wants the current message status interrupt for all + // messages. + // + case CAN_INT_STS_OBJECT: + { + // + // Read and combine both 16 bit values into one 32bit status. + // + ulStatus = (CANRegRead(ulBase + CAN_O_MSG1INT) & + CAN_MSG1INT_INTPND_M); + ulStatus |= (CANRegRead(ulBase + CAN_O_MSG2INT) << 16); + break; + } + + // + // Request was for unknown status so just return 0. + // + default: + { + ulStatus = 0; + break; + } + } + // + // Return the interrupt status value + // + return(ulStatus); +} + +//***************************************************************************** +// +//! Clears a CAN interrupt source. +//! +//! \param ulBase is the base address of the CAN controller. +//! \param ulIntClr is a value indicating which interrupt source to clear. +//! +//! This function can be used to clear a specific interrupt source. The +//! \e ulIntClr parameter should be one of the following values: +//! +//! - \b CAN_INT_INTID_STATUS - Clears a status interrupt. +//! - 1-32 - Clears the specified message object interrupt +//! +//! It is not necessary to use this function to clear an interrupt. This +//! should only be used if the application wants to clear an interrupt source +//! without taking the normal interrupt action. +//! +//! Normally, the status interrupt is cleared by reading the controller status +//! using CANStatusGet(). A specific message object interrupt is normally +//! cleared by reading the message object using CANMessageGet(). +//! +//! \note Since there is a write buffer in the Cortex-M3 processor, it may take +//! several clock cycles before the interrupt source is actually cleared. +//! Therefore, it is recommended that the interrupt source be cleared early in +//! the interrupt handler (as opposed to the very last action) to avoid +//! returning from the interrupt handler before the interrupt source is +//! actually cleared. Failure to do so may result in the interrupt handler +//! being immediately reentered (since NVIC still sees the interrupt source +//! asserted). +//! +//! \return None. +// +//***************************************************************************** +void +CANIntClear(unsigned long ulBase, unsigned long ulIntClr) +{ + // + // Check the arguments. + // + ASSERT(CANBaseValid(ulBase)); + ASSERT((ulIntClr == CAN_INT_INTID_STATUS) || + ((ulIntClr>=1) && (ulIntClr <=32))); + + if(ulIntClr == CAN_INT_INTID_STATUS) + { + // + // Simply read and discard the status to clear the interrupt. + // + CANRegRead(ulBase + CAN_O_STS); + } + else + { + // + // Wait to be sure that this interface is not busy. + // + while(CANRegRead(ulBase + CAN_O_IF1CRQ) & CAN_IF1CRQ_BUSY) + { + } + + // + // Only change the interrupt pending state by setting only the + // CAN_IF1CMSK_CLRINTPND bit. + // + CANRegWrite(ulBase + CAN_O_IF1CMSK, CAN_IF1CMSK_CLRINTPND); + + // + // Send the clear pending interrupt command to the CAN controller. + // + CANRegWrite(ulBase + CAN_O_IF1CRQ, ulIntClr & CAN_IF1CRQ_MNUM_M); + + // + // Wait to be sure that this interface is not busy. + // + while(CANRegRead(ulBase + CAN_O_IF1CRQ) & CAN_IF1CRQ_BUSY) + { + } + } +} + +//***************************************************************************** +// +//! Sets the CAN controller automatic retransmission behavior. +//! +//! \param ulBase is the base address of the CAN controller. +//! \param bAutoRetry enables automatic retransmission. +//! +//! Enables or disables automatic retransmission of messages with detected +//! errors. If \e bAutoRetry is \b true, then automatic retransmission is +//! enabled, otherwise it is disabled. +//! +//! \return None. +// +//***************************************************************************** +void +CANRetrySet(unsigned long ulBase, tBoolean bAutoRetry) +{ + unsigned long ulCtlReg; + + // + // Check the arguments. + // + ASSERT(CANBaseValid(ulBase)); + + ulCtlReg = CANRegRead(ulBase + CAN_O_CTL); + + // + // Conditionally set the DAR bit to enable/disable auto-retry. + // + if(bAutoRetry) + { + // + // Clearing the DAR bit tells the controller to not disable the + // auto-retry of messages which were not transmitted or received + // correctly. + // + ulCtlReg &= ~CAN_CTL_DAR; + } + else + { + // + // Setting the DAR bit tells the controller to disable the auto-retry + // of messages which were not transmitted or received correctly. + // + ulCtlReg |= CAN_CTL_DAR; + } + + CANRegWrite(ulBase + CAN_O_CTL, ulCtlReg); +} + +//***************************************************************************** +// +//! Returns the current setting for automatic retransmission. +//! +//! \param ulBase is the base address of the CAN controller. +//! +//! Reads the current setting for the automatic retransmission in the CAN +//! controller and returns it to the caller. +//! +//! \return Returns \b true if automatic retransmission is enabled, \b false +//! otherwise. +// +//***************************************************************************** +tBoolean +CANRetryGet(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(CANBaseValid(ulBase)); + + // + // Read the disable automatic retry setting from the CAN controller. + // + if(CANRegRead(ulBase + CAN_O_CTL) & CAN_CTL_DAR) + { + // + // Automatic data retransmission is not enabled. + // + return(false); + } + + // + // Automatic data retransmission is enabled. + // + return(true); +} + +//***************************************************************************** +// +//! Reads one of the controller status registers. +//! +//! \param ulBase is the base address of the CAN controller. +//! \param eStatusReg is the status register to read. +//! +//! Reads a status register of the CAN controller and returns it to the caller. +//! The different status registers are: +//! +//! - \b CAN_STS_CONTROL - the main controller status +//! - \b CAN_STS_TXREQUEST - bit mask of objects pending transmission +//! - \b CAN_STS_NEWDAT - bit mask of objects with new data +//! - \b CAN_STS_MSGVAL - bit mask of objects with valid configuration +//! +//! When reading the main controller status register, a pending status +//! interrupt will be cleared. This should be used in the interrupt handler +//! for the CAN controller if the cause is a status interrupt. The controller +//! status register fields are as follows: +//! +//! - \b CAN_STATUS_BUS_OFF - controller is in bus-off condition +//! - \b CAN_STATUS_EWARN - an error counter has reached a limit of at least 96 +//! - \b CAN_STATUS_EPASS - CAN controller is in the error passive state +//! - \b CAN_STATUS_RXOK - a message was received successfully (independent of +//! any message filtering). +//! - \b CAN_STATUS_TXOK - a message was successfully transmitted +//! - \b CAN_STATUS_LEC_MSK - mask of last error code bits (3 bits) +//! - \b CAN_STATUS_LEC_NONE - no error +//! - \b CAN_STATUS_LEC_STUFF - stuffing error detected +//! - \b CAN_STATUS_LEC_FORM - a format error occurred in the fixed format part +//! of a message +//! - \b CAN_STATUS_LEC_ACK - a transmitted message was not acknowledged +//! - \b CAN_STATUS_LEC_BIT1 - dominant level detected when trying to send in +//! recessive mode +//! - \b CAN_STATUS_LEC_BIT0 - recessive level detected when trying to send in +//! dominant mode +//! - \b CAN_STATUS_LEC_CRC - CRC error in received message +//! +//! The remaining status registers are 32-bit bit maps to the message objects. +//! They can be used to quickly obtain information about the status of all the +//! message objects without needing to query each one. They contain the +//! following information: +//! +//! - \b CAN_STS_TXREQUEST - if a message object's TxRequest bit is set, that +//! means that a transmission is pending on that object. The application can +//! use this to determine which objects are still waiting to send a message. +//! - \b CAN_STS_NEWDAT - if a message object's NewDat bit is set, that means +//! that a new message has been received in that object, and has not yet been +//! picked up by the host application +//! - \b CAN_STS_MSGVAL - if a message object's MsgVal bit is set, that means +//! it has a valid configuration programmed. The host application can use this +//! to determine which message objects are empty/unused. +//! +//! \return Returns the value of the status register. +// +//***************************************************************************** +unsigned long +CANStatusGet(unsigned long ulBase, tCANStsReg eStatusReg) +{ + unsigned long ulStatus; + + // + // Check the arguments. + // + ASSERT(CANBaseValid(ulBase)); + + switch(eStatusReg) + { + // + // Just return the global CAN status register since that is what was + // requested. + // + case CAN_STS_CONTROL: + { + ulStatus = CANRegRead(ulBase + CAN_O_STS); + CANRegWrite(ulBase + CAN_O_STS, + ~(CAN_STS_RXOK | CAN_STS_TXOK | CAN_STS_LEC_M)); + break; + } + + // + // Combine the Transmit status bits into one 32bit value. + // + case CAN_STS_TXREQUEST: + { + ulStatus = CANRegRead(ulBase + CAN_O_TXRQ1); + ulStatus |= CANRegRead(ulBase + CAN_O_TXRQ2) << 16; + break; + } + + // + // Combine the New Data status bits into one 32bit value. + // + case CAN_STS_NEWDAT: + { + ulStatus = CANRegRead(ulBase + CAN_O_NWDA1); + ulStatus |= CANRegRead(ulBase + CAN_O_NWDA2) << 16; + break; + } + + // + // Combine the Message valid status bits into one 32bit value. + // + case CAN_STS_MSGVAL: + { + ulStatus = CANRegRead(ulBase + CAN_O_MSG1VAL); + ulStatus |= CANRegRead(ulBase + CAN_O_MSG2VAL) << 16; + break; + } + + // + // Unknown CAN status requested so return 0. + // + default: + { + ulStatus = 0; + break; + } + } + return(ulStatus); +} + +//***************************************************************************** +// +//! Reads the CAN controller error counter register. +//! +//! \param ulBase is the base address of the CAN controller. +//! \param pulRxCount is a pointer to storage for the receive error counter. +//! \param pulTxCount is a pointer to storage for the transmit error counter. +//! +//! Reads the error counter register and returns the transmit and receive error +//! counts to the caller along with a flag indicating if the controller receive +//! counter has reached the error passive limit. The values of the receive and +//! transmit error counters are returned through the pointers provided as +//! parameters. +//! +//! After this call, \e *pulRxCount will hold the current receive error count +//! and \e *pulTxCount will hold the current transmit error count. +//! +//! \return Returns \b true if the receive error count has reached the error +//! passive limit, and \b false if the error count is below the error passive +//! limit. +// +//***************************************************************************** +tBoolean +CANErrCntrGet(unsigned long ulBase, unsigned long *pulRxCount, + unsigned long *pulTxCount) +{ + unsigned long ulCANError; + + // + // Check the arguments. + // + ASSERT(CANBaseValid(ulBase)); + + // + // Read the current count of transmit/receive errors. + // + ulCANError = CANRegRead(ulBase + CAN_O_ERR); + + // + // Extract the error numbers from the register value. + // + *pulRxCount = (ulCANError & CAN_ERR_REC_M) >> CAN_ERR_REC_S; + *pulTxCount = (ulCANError & CAN_ERR_TEC_M) >> CAN_ERR_TEC_S; + + if(ulCANError & CAN_ERR_RP) + { + return(true); + } + return(false); +} + +//***************************************************************************** +// +//! Configures a message object in the CAN controller. +//! +//! \param ulBase is the base address of the CAN controller. +//! \param ulObjID is the object number to configure (1-32). +//! \param pMsgObject is a pointer to a structure containing message object +//! settings. +//! \param eMsgType indicates the type of message for this object. +//! +//! This function is used to configure any one of the 32 message objects in the +//! CAN controller. A message object can be configured as any type of CAN +//! message object as well as several options for automatic transmission and +//! reception. This call also allows the message object to be configured to +//! generate interrupts on completion of message receipt or transmission. The +//! message object can also be configured with a filter/mask so that actions +//! are only taken when a message that meets certain parameters is seen on the +//! CAN bus. +//! +//! The \e eMsgType parameter must be one of the following values: +//! +//! - \b MSG_OBJ_TYPE_TX - CAN transmit message object. +//! - \b MSG_OBJ_TYPE_TX_REMOTE - CAN transmit remote request message object. +//! - \b MSG_OBJ_TYPE_RX - CAN receive message object. +//! - \b MSG_OBJ_TYPE_RX_REMOTE - CAN receive remote request message object. +//! - \b MSG_OBJ_TYPE_RXTX_REMOTE - CAN remote frame receive remote, then +//! transmit message object. +//! +//! The message object pointed to by \e pMsgObject must be populated by the +//! caller, as follows: +//! +//! - \e ulMsgID - contains the message ID, either 11 or 29 bits. +//! - \e ulMsgIDMask - mask of bits from \e ulMsgID that must match if +//! identifier filtering is enabled. +//! - \e ulFlags +//! - Set \b MSG_OBJ_TX_INT_ENABLE flag to enable interrupt on transmission. +//! - Set \b MSG_OBJ_RX_INT_ENABLE flag to enable interrupt on receipt. +//! - Set \b MSG_OBJ_USE_ID_FILTER flag to enable filtering based on the +//! identifier mask specified by \e ulMsgIDMask. +//! - \e ulMsgLen - the number of bytes in the message data. This should be +//! non-zero even for a remote frame; it should match the expected bytes of the +//! data responding data frame. +//! - \e pucMsgData - points to a buffer containing up to 8 bytes of data for a +//! data frame. +//! +//! \b Example: To send a data frame or remote frame(in response to a remote +//! request), take the following steps: +//! +//! -# Set \e eMsgType to \b MSG_OBJ_TYPE_TX. +//! -# Set \e pMsgObject->ulMsgID to the message ID. +//! -# Set \e pMsgObject->ulFlags. Make sure to set \b MSG_OBJ_TX_INT_ENABLE to +//! allow an interrupt to be generated when the message is sent. +//! -# Set \e pMsgObject->ulMsgLen to the number of bytes in the data frame. +//! -# Set \e pMsgObject->pucMsgData to point to an array containing the bytes +//! to send in the message. +//! -# Call this function with \e ulObjID set to one of the 32 object buffers. +//! +//! \b Example: To receive a specific data frame, take the following steps: +//! +//! -# Set \e eMsgObjType to \b MSG_OBJ_TYPE_RX. +//! -# Set \e pMsgObject->ulMsgID to the full message ID, or a partial mask to +//! use partial ID matching. +//! -# Set \e pMsgObject->ulMsgIDMask bits that should be used for masking +//! during comparison. +//! -# Set \e pMsgObject->ulFlags as follows: +//! - Set \b MSG_OBJ_RX_INT_ENABLE flag to be interrupted when the data frame +//! is received. +//! - Set \b MSG_OBJ_USE_ID_FILTER flag to enable identifier based filtering. +//! -# Set \e pMsgObject->ulMsgLen to the number of bytes in the expected data +//! frame. +//! -# The buffer pointed to by \e pMsgObject->pucMsgData is not used by this +//! call as no data is present at the time of the call. +//! -# Call this function with \e ulObjID set to one of the 32 object buffers. +//! +//! If you specify a message object buffer that already contains a message +//! definition, it will be overwritten. +//! +//! \return None. +// +//***************************************************************************** +void +CANMessageSet(unsigned long ulBase, unsigned long ulObjID, + tCANMsgObject *pMsgObject, tMsgObjType eMsgType) +{ + unsigned short usCmdMaskReg; + unsigned short usMaskReg0, usMaskReg1; + unsigned short usArbReg0, usArbReg1; + unsigned short usMsgCtrl; + tBoolean bTransferData; + tBoolean bUseExtendedID; + + bTransferData = 0; + + // + // Check the arguments. + // + ASSERT(CANBaseValid(ulBase)); + ASSERT((ulObjID <= 32) && (ulObjID != 0)); + ASSERT((eMsgType == MSG_OBJ_TYPE_TX) || + (eMsgType == MSG_OBJ_TYPE_TX_REMOTE) || + (eMsgType == MSG_OBJ_TYPE_RX) || + (eMsgType == MSG_OBJ_TYPE_RX_REMOTE) || + (eMsgType == MSG_OBJ_TYPE_TX_REMOTE) || + (eMsgType == MSG_OBJ_TYPE_RXTX_REMOTE)); + + // + // Wait for busy bit to clear + // + while(CANRegRead(ulBase + CAN_O_IF1CRQ) & CAN_IF1CRQ_BUSY) + { + } + + // + // See if we need to use an extended identifier or not. + // + if((pMsgObject->ulMsgID > CAN_MAX_11BIT_MSG_ID) || + (pMsgObject->ulFlags & MSG_OBJ_EXTENDED_ID)) + { + bUseExtendedID = 1; + } + else + { + bUseExtendedID = 0; + } + + // + // This is always a write to the Message object as this call is setting a + // message object. This call will also always set all size bits so it sets + // both data bits. The call will use the CONTROL register to set control + // bits so this bit needs to be set as well. + // + usCmdMaskReg = (CAN_IF1CMSK_WRNRD | CAN_IF1CMSK_DATAA | CAN_IF1CMSK_DATAB | + CAN_IF1CMSK_CONTROL); + + // + // Initialize the values to a known state before filling them in based on + // the type of message object that is being configured. + // + usArbReg0 = 0; + usArbReg1 = 0; + usMsgCtrl = 0; + usMaskReg0 = 0; + usMaskReg1 = 0; + + switch(eMsgType) + { + // + // Transmit message object. + // + case MSG_OBJ_TYPE_TX: + { + // + // Set the TXRQST bit and the reset the rest of the register. + // + usMsgCtrl |= CAN_IF1MCTL_TXRQST; + usArbReg1 = CAN_IF1ARB2_DIR; + bTransferData = 1; + break; + } + + // + // Transmit remote request message object + // + case MSG_OBJ_TYPE_TX_REMOTE: + { + // + // Set the TXRQST bit and the reset the rest of the register. + // + usMsgCtrl |= CAN_IF1MCTL_TXRQST; + usArbReg1 = 0; + break; + } + + // + // Receive message object. + // + case MSG_OBJ_TYPE_RX: + { + // + // This clears the DIR bit along with everything else. The TXRQST + // bit was cleared by defaulting usMsgCtrl to 0. + // + usArbReg1 = 0; + break; + } + + // + // Receive remote request message object. + // + case MSG_OBJ_TYPE_RX_REMOTE: + { + // + // The DIR bit is set to one for remote receivers. The TXRQST bit + // was cleared by defaulting usMsgCtrl to 0. + // + usArbReg1 = CAN_IF1ARB2_DIR; + + // + // Set this object so that it only indicates that a remote frame + // was received and allow for software to handle it by sending back + // a data frame. + // + usMsgCtrl = CAN_IF1MCTL_UMASK; + + // + // Use the full Identifier by default. + // + usMaskReg0 = 0xffff; + usMaskReg1 = 0x1fff; + + // + // Make sure to send the mask to the message object. + // + usCmdMaskReg |= CAN_IF1CMSK_MASK; + break; + } + + // + // Remote frame receive remote, with auto-transmit message object. + // + case MSG_OBJ_TYPE_RXTX_REMOTE: + { + // + // Oddly the DIR bit is set to one for remote receivers. + // + usArbReg1 = CAN_IF1ARB2_DIR; + + // + // Set this object to auto answer if a matching identifier is seen. + // + usMsgCtrl = CAN_IF1MCTL_RMTEN | CAN_IF1MCTL_UMASK; + + // + // The data to be returned needs to be filled in. + // + bTransferData = 1; + break; + } + + // + // This case should never happen due to the ASSERT statement at the + // beginning of this function. + // + default: + { + return; + } + } + + // + // Configure the Mask Registers. + // + if(pMsgObject->ulFlags & MSG_OBJ_USE_ID_FILTER) + { + if(bUseExtendedID) + { + // + // Set the 29 bits of Identifier mask that were requested. + // + usMaskReg0 = pMsgObject->ulMsgIDMask & CAN_IF1MSK1_IDMSK_M; + usMaskReg1 = ((pMsgObject->ulMsgIDMask >> 16) & + CAN_IF1MSK2_IDMSK_M); + } + else + { + // + // Lower 16 bit are unused so set them to zero. + // + usMaskReg0 = 0; + + // + // Put the 11 bit Mask Identifier into the upper bits of the field + // in the register. + // + usMaskReg1 = ((pMsgObject->ulMsgIDMask << 2) & + CAN_IF1MSK2_IDMSK_M); + } + } + + // + // If the caller wants to filter on the extended ID bit then set it. + // + if((pMsgObject->ulFlags & MSG_OBJ_USE_EXT_FILTER) == + MSG_OBJ_USE_EXT_FILTER) + { + usMaskReg1 |= CAN_IF1MSK2_MXTD; + } + + // + // The caller wants to filter on the message direction field. + // + if((pMsgObject->ulFlags & MSG_OBJ_USE_DIR_FILTER) == + MSG_OBJ_USE_DIR_FILTER) + { + usMaskReg1 |= CAN_IF1MSK2_MDIR; + } + + if(pMsgObject->ulFlags & (MSG_OBJ_USE_ID_FILTER | MSG_OBJ_USE_DIR_FILTER | + MSG_OBJ_USE_EXT_FILTER)) + { + // + // Set the UMASK bit to enable using the mask register. + // + usMsgCtrl |= CAN_IF1MCTL_UMASK; + + // + // Set the MASK bit so that this gets transferred to the Message Object. + // + usCmdMaskReg |= CAN_IF1CMSK_MASK; + } + + // + // Set the Arb bit so that this gets transferred to the Message object. + // + usCmdMaskReg |= CAN_IF1CMSK_ARB; + + // + // Configure the Arbitration registers. + // + if(bUseExtendedID) + { + // + // Set the 29 bit version of the Identifier for this message object. + // + usArbReg0 |= pMsgObject->ulMsgID & CAN_IF1ARB1_ID_M; + usArbReg1 |= (pMsgObject->ulMsgID >> 16) & CAN_IF1ARB2_ID_M; + + // + // Mark the message as valid and set the extended ID bit. + // + usArbReg1 |= CAN_IF1ARB2_MSGVAL | CAN_IF1ARB2_XTD; + } + else + { + // + // Set the 11 bit version of the Identifier for this message object. + // The lower 18 bits are set to zero. + // + usArbReg1 |= (pMsgObject->ulMsgID << 2) & CAN_IF1ARB2_ID_M; + + // + // Mark the message as valid. + // + usArbReg1 |= CAN_IF1ARB2_MSGVAL; + } + + // + // Set the data length since this is set for all transfers. This is also a + // single transfer and not a FIFO transfer so set EOB bit. + // + usMsgCtrl |= (pMsgObject->ulMsgLen & CAN_IF1MCTL_DLC_M); + + // + // Mark this as the last entry if this is not the last entry in a FIFO. + // + if((pMsgObject->ulFlags & MSG_OBJ_FIFO) == 0) + { + usMsgCtrl |= CAN_IF1MCTL_EOB; + } + + // + // Enable transmit interrupts if they should be enabled. + // + if(pMsgObject->ulFlags & MSG_OBJ_TX_INT_ENABLE) + { + usMsgCtrl |= CAN_IF1MCTL_TXIE; + } + + // + // Enable receive interrupts if they should be enabled. + // + if(pMsgObject->ulFlags & MSG_OBJ_RX_INT_ENABLE) + { + usMsgCtrl |= CAN_IF1MCTL_RXIE; + } + + // + // Write the data out to the CAN Data registers if needed. + // + if(bTransferData) + { + CANDataRegWrite(pMsgObject->pucMsgData, + (unsigned long *)(ulBase + CAN_O_IF1DA1), + pMsgObject->ulMsgLen); + } + + // + // Write out the registers to program the message object. + // + CANRegWrite(ulBase + CAN_O_IF1CMSK, usCmdMaskReg); + CANRegWrite(ulBase + CAN_O_IF1MSK1, usMaskReg0); + CANRegWrite(ulBase + CAN_O_IF1MSK2, usMaskReg1); + CANRegWrite(ulBase + CAN_O_IF1ARB1, usArbReg0); + CANRegWrite(ulBase + CAN_O_IF1ARB2, usArbReg1); + CANRegWrite(ulBase + CAN_O_IF1MCTL, usMsgCtrl); + + // + // Transfer the message object to the message object specifiec by ulObjID. + // + CANRegWrite(ulBase + CAN_O_IF1CRQ, ulObjID & CAN_IF1CRQ_MNUM_M); + + return; +} + +//***************************************************************************** +// +//! Reads a CAN message from one of the message object buffers. +//! +//! \param ulBase is the base address of the CAN controller. +//! \param ulObjID is the object number to read (1-32). +//! \param pMsgObject points to a structure containing message object fields. +//! \param bClrPendingInt indicates whether an associated interrupt should be +//! cleared. +//! +//! This function is used to read the contents of one of the 32 message objects +//! in the CAN controller, and return it to the caller. The data returned is +//! stored in the fields of the caller-supplied structure pointed to by +//! \e pMsgObject. The data consists of all of the parts of a CAN message, +//! plus some control and status information. +//! +//! Normally this is used to read a message object that has received and stored +//! a CAN message with a certain identifier. However, this could also be used +//! to read the contents of a message object in order to load the fields of the +//! structure in case only part of the structure needs to be changed from a +//! previous setting. +//! +//! When using CANMessageGet, all of the same fields of the structure are +//! populated in the same way as when the CANMessageSet() function is used, +//! with the following exceptions: +//! +//! \e pMsgObject->ulFlags: +//! +//! - \b MSG_OBJ_NEW_DATA indicates if this is new data since the last time it +//! was read +//! - \b MSG_OBJ_DATA_LOST indicates that at least one message was received on +//! this message object, and not read by the host before being overwritten. +//! +//! \return None. +// +//***************************************************************************** +void +CANMessageGet(unsigned long ulBase, unsigned long ulObjID, + tCANMsgObject *pMsgObject, tBoolean bClrPendingInt) +{ + unsigned short usCmdMaskReg; + unsigned short usMaskReg0, usMaskReg1; + unsigned short usArbReg0, usArbReg1; + unsigned short usMsgCtrl; + + // + // Check the arguments. + // + ASSERT(CANBaseValid(ulBase)); + ASSERT((ulObjID <= 32) && (ulObjID != 0)); + + // + // This is always a read to the Message object as this call is setting a + // message object. + // + usCmdMaskReg = (CAN_IF1CMSK_DATAA | CAN_IF1CMSK_DATAB | + CAN_IF1CMSK_CONTROL | CAN_IF1CMSK_MASK | CAN_IF1CMSK_ARB); + + // + // Clear a pending interrupt and new data in a message object. + // + if(bClrPendingInt) + { + usCmdMaskReg |= CAN_IF1CMSK_CLRINTPND; + } + + // + // Set up the request for data from the message object. + // + CANRegWrite(ulBase + CAN_O_IF2CMSK, usCmdMaskReg); + + // + // Transfer the message object to the message object specified by ulObjID. + // + CANRegWrite(ulBase + CAN_O_IF2CRQ, ulObjID & CAN_IF1CRQ_MNUM_M); + + // + // Wait for busy bit to clear + // + while(CANRegRead(ulBase + CAN_O_IF2CRQ) & CAN_IF1CRQ_BUSY) + { + } + + // + // Read out the IF Registers. + // + usMaskReg0 = CANRegRead(ulBase + CAN_O_IF2MSK1); + usMaskReg1 = CANRegRead(ulBase + CAN_O_IF2MSK2); + usArbReg0 = CANRegRead(ulBase + CAN_O_IF2ARB1); + usArbReg1 = CANRegRead(ulBase + CAN_O_IF2ARB2); + usMsgCtrl = CANRegRead(ulBase + CAN_O_IF2MCTL); + + pMsgObject->ulFlags = MSG_OBJ_NO_FLAGS; + + // + // Determine if this is a remote frame by checking the TXRQST and DIR bits. + // + if((!(usMsgCtrl & CAN_IF1MCTL_TXRQST) && (usArbReg1 & CAN_IF1ARB2_DIR)) || + ((usMsgCtrl & CAN_IF1MCTL_TXRQST) && (!(usArbReg1 & CAN_IF1ARB2_DIR)))) + { + pMsgObject->ulFlags |= MSG_OBJ_REMOTE_FRAME; + } + + // + // Get the identifier out of the register, the format depends on size of + // the mask. + // + if(usArbReg1 & CAN_IF1ARB2_XTD) + { + // + // Set the 29 bit version of the Identifier for this message object. + // + pMsgObject->ulMsgID = ((usArbReg1 & CAN_IF1ARB2_ID_M) << 16) | + usArbReg0; + + pMsgObject->ulFlags |= MSG_OBJ_EXTENDED_ID; + } + else + { + // + // The Identifier is an 11 bit value. + // + pMsgObject->ulMsgID = (usArbReg1 & CAN_IF1ARB2_ID_M) >> 2; + } + + // + // Indicate that we lost some data. + // + if(usMsgCtrl & CAN_IF1MCTL_MSGLST) + { + pMsgObject->ulFlags |= MSG_OBJ_DATA_LOST; + } + + // + // Set the flag to indicate if ID masking was used. + // + if(usMsgCtrl & CAN_IF1MCTL_UMASK) + { + if(usArbReg1 & CAN_IF1ARB2_XTD) + { + // + // The Identifier Mask is assumed to also be a 29 bit value. + // + pMsgObject->ulMsgIDMask = + ((usMaskReg1 & CAN_IF1MSK2_IDMSK_M) << 16) | usMaskReg0; + + // + // If this is a fully specified Mask and a remote frame then don't + // set the MSG_OBJ_USE_ID_FILTER because the ID was not really + // filtered. + // + if((pMsgObject->ulMsgIDMask != 0x1fffffff) || + ((pMsgObject->ulFlags & MSG_OBJ_REMOTE_FRAME) == 0)) + { + pMsgObject->ulFlags |= MSG_OBJ_USE_ID_FILTER; + } + } + else + { + // + // The Identifier Mask is assumed to also be an 11 bit value. + // + pMsgObject->ulMsgIDMask = ((usMaskReg1 & CAN_IF1MSK2_IDMSK_M) >> + 2); + + // + // If this is a fully specified Mask and a remote frame then don't + // set the MSG_OBJ_USE_ID_FILTER because the ID was not really + // filtered. + // + if((pMsgObject->ulMsgIDMask != 0x7ff) || + ((pMsgObject->ulFlags & MSG_OBJ_REMOTE_FRAME) == 0)) + { + pMsgObject->ulFlags |= MSG_OBJ_USE_ID_FILTER; + } + } + + // + // Indicate if the extended bit was used in filtering. + // + if(usMaskReg1 & CAN_IF1MSK2_MXTD) + { + pMsgObject->ulFlags |= MSG_OBJ_USE_EXT_FILTER; + } + + // + // Indicate if direction filtering was enabled. + // + if(usMaskReg1 & CAN_IF1MSK2_MDIR) + { + pMsgObject->ulFlags |= MSG_OBJ_USE_DIR_FILTER; + } + } + + // + // Set the interrupt flags. + // + if(usMsgCtrl & CAN_IF1MCTL_TXIE) + { + pMsgObject->ulFlags |= MSG_OBJ_TX_INT_ENABLE; + } + if(usMsgCtrl & CAN_IF1MCTL_RXIE) + { + pMsgObject->ulFlags |= MSG_OBJ_RX_INT_ENABLE; + } + + // + // See if there is new data available. + // + if(usMsgCtrl & CAN_IF1MCTL_NEWDAT) + { + // + // Get the amount of data needed to be read. + // + pMsgObject->ulMsgLen = (usMsgCtrl & CAN_IF1MCTL_DLC_M); + + // + // Don't read any data for a remote frame, there is nothing valid in + // that buffer anyway. + // + if((pMsgObject->ulFlags & MSG_OBJ_REMOTE_FRAME) == 0) + { + // + // Read out the data from the CAN registers. + // + CANDataRegRead(pMsgObject->pucMsgData, + (unsigned long *)(ulBase + CAN_O_IF2DA1), + pMsgObject->ulMsgLen); + } + + // + // Now clear out the new data flag. + // + CANRegWrite(ulBase + CAN_O_IF2CMSK, CAN_IF1CMSK_NEWDAT); + + // + // Transfer the message object to the message object specified by + // ulObjID. + // + CANRegWrite(ulBase + CAN_O_IF2CRQ, ulObjID & CAN_IF1CRQ_MNUM_M); + + // + // Wait for busy bit to clear + // + while(CANRegRead(ulBase + CAN_O_IF2CRQ) & CAN_IF1CRQ_BUSY) + { + } + + // + // Indicate that there is new data in this message. + // + pMsgObject->ulFlags |= MSG_OBJ_NEW_DATA; + } + else + { + // + // Along with the MSG_OBJ_NEW_DATA not being set the amount of data + // needs to be set to zero if none was available. + // + pMsgObject->ulMsgLen = 0; + } +} + +//***************************************************************************** +// +//! Clears a message object so that it is no longer used. +//! +//! \param ulBase is the base address of the CAN controller. +//! \param ulObjID is the message object number to disable (1-32). +//! +//! This function frees the specified message object from use. Once a message +//! object has been ``cleared,'' it will no longer automatically send or +//! receive messages, or generate interrupts. +//! +//! \return None. +// +//***************************************************************************** +void +CANMessageClear(unsigned long ulBase, unsigned long ulObjID) +{ + // + // Check the arguments. + // + ASSERT(CANBaseValid(ulBase)); + ASSERT((ulObjID >= 1) && (ulObjID <= 32)); + + // + // Wait for busy bit to clear + // + while(CANRegRead(ulBase + CAN_O_IF1CRQ) & CAN_IF1CRQ_BUSY) + { + } + + // + // Clear the message value bit in the arbitration register. This indicates + // the message is not valid. + // + CANRegWrite(ulBase + CAN_O_IF1CMSK, CAN_IF1CMSK_WRNRD | CAN_IF1CMSK_ARB); + CANRegWrite(ulBase + CAN_O_IF1ARB1, 0); + CANRegWrite(ulBase + CAN_O_IF1ARB2, 0); + + // + // Initiate programming the message object + // + CANRegWrite(ulBase + CAN_O_IF1CRQ, ulObjID & CAN_IF1CRQ_MNUM_M); +} + +//***************************************************************************** +// +// Close the Doxygen group. +//! @} +// +//***************************************************************************** diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/can.h b/bsp/lm3s_9b9x/Libraries/driverlib/can.h new file mode 100644 index 0000000000000000000000000000000000000000..4913c934bae15393635964a100b85067b3f87b30 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/can.h @@ -0,0 +1,450 @@ +//***************************************************************************** +// +// can.h - Defines and Macros for the CAN controller. +// +// Copyright (c) 2006-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +#ifndef __CAN_H__ +#define __CAN_H__ + +//***************************************************************************** +// +//! \addtogroup can_api +//! @{ +// +//***************************************************************************** + +//***************************************************************************** +// +// If building with a C++ compiler, make all of the definitions in this header +// have a C binding. +// +//***************************************************************************** +#ifdef __cplusplus +extern "C" +{ +#endif + +//***************************************************************************** +// +// Miscellaneous defines for Message ID Types +// +//***************************************************************************** + +//***************************************************************************** +// +// These are the flags used by the tCANMsgObject.ulFlags value when calling the +// CANMessageSet() and CANMessageGet() functions. +// +//***************************************************************************** + +// +//! This definition is used with the tCANMsgObject ulFlags value and indicates +//! that transmit interrupts should be enabled, or are enabled. +// +#define MSG_OBJ_TX_INT_ENABLE 0x00000001 + +// +//! This indicates that receive interrupts should be enabled, or are +//! enabled. +// +#define MSG_OBJ_RX_INT_ENABLE 0x00000002 + +// +//! This indicates that a message object will use or is using an extended +//! identifier. +// +#define MSG_OBJ_EXTENDED_ID 0x00000004 + +// +//! This indicates that a message object will use or is using filtering +//! based on the object's message identifier. +// +#define MSG_OBJ_USE_ID_FILTER 0x00000008 + +// +//! This indicates that new data was available in the message object. +// +#define MSG_OBJ_NEW_DATA 0x00000080 + +// +//! This indicates that data was lost since this message object was last +//! read. +// +#define MSG_OBJ_DATA_LOST 0x00000100 + +// +//! This indicates that a message object will use or is using filtering +//! based on the direction of the transfer. If the direction filtering is +//! used, then ID filtering must also be enabled. +// +#define MSG_OBJ_USE_DIR_FILTER (0x00000010 | MSG_OBJ_USE_ID_FILTER) + +// +//! This indicates that a message object will use or is using message +//! identifier filtering based on the extended identifier. If the extended +//! identifier filtering is used, then ID filtering must also be enabled. +// +#define MSG_OBJ_USE_EXT_FILTER (0x00000020 | MSG_OBJ_USE_ID_FILTER) + +// +//! This indicates that a message object is a remote frame. +// +#define MSG_OBJ_REMOTE_FRAME 0x00000040 + +// +//! This indicates that this message object is part of a FIFO structure and +//! not the final message object in a FIFO. +// +#define MSG_OBJ_FIFO 0x00000200 + +// +//! This indicates that a message object has no flags set. +// +#define MSG_OBJ_NO_FLAGS 0x00000000 + +//***************************************************************************** +// +//! This define is used with the flag values to allow checking only status +//! flags and not configuration flags. +// +//***************************************************************************** +#define MSG_OBJ_STATUS_MASK (MSG_OBJ_NEW_DATA | MSG_OBJ_DATA_LOST) + +//***************************************************************************** +// +//! The structure used for encapsulating all the items associated with a CAN +//! message object in the CAN controller. +// +//***************************************************************************** +typedef struct +{ + // + //! The CAN message identifier used for 11 or 29 bit identifiers. + // + unsigned long ulMsgID; + + // + //! The message identifier mask used when identifier filtering is enabled. + // + unsigned long ulMsgIDMask; + + // + //! This value holds various status flags and settings specified by + //! tCANObjFlags. + // + unsigned long ulFlags; + + // + //! This value is the number of bytes of data in the message object. + // + unsigned long ulMsgLen; + + // + //! This is a pointer to the message object's data. + // + unsigned char *pucMsgData; +} +tCANMsgObject; + +//***************************************************************************** +// +//! This structure is used for encapsulating the values associated with setting +//! up the bit timing for a CAN controller. The structure is used when calling +//! the CANGetBitTiming and CANSetBitTiming functions. +// +//***************************************************************************** +typedef struct +{ + // + //! This value holds the sum of the Synchronization, Propagation, and Phase + //! Buffer 1 segments, measured in time quanta. The valid values for this + //! setting range from 2 to 16. + // + unsigned int uSyncPropPhase1Seg; + + // + //! This value holds the Phase Buffer 2 segment in time quanta. The valid + //! values for this setting range from 1 to 8. + // + unsigned int uPhase2Seg; + + // + //! This value holds the Resynchronization Jump Width in time quanta. The + //! valid values for this setting range from 1 to 4. + // + unsigned int uSJW; + + // + //! This value holds the CAN_CLK divider used to determine time quanta. + //! The valid values for this setting range from 1 to 1023. + // + unsigned int uQuantumPrescaler; +} +tCANBitClkParms; + +//***************************************************************************** +// +//! This data type is used to identify the interrupt status register. This is +//! used when calling the CANIntStatus() function. +// +//***************************************************************************** +typedef enum +{ + // + //! Read the CAN interrupt status information. + // + CAN_INT_STS_CAUSE, + + // + //! Read a message object's interrupt status. + // + CAN_INT_STS_OBJECT +} +tCANIntStsReg; + +//***************************************************************************** +// +//! This data type is used to identify which of several status registers to +//! read when calling the CANStatusGet() function. +// +//***************************************************************************** +typedef enum +{ + // + //! Read the full CAN controller status. + // + CAN_STS_CONTROL, + + // + //! Read the full 32-bit mask of message objects with a transmit request + //! set. + // + CAN_STS_TXREQUEST, + + // + //! Read the full 32-bit mask of message objects with new data available. + // + CAN_STS_NEWDAT, + + // + //! Read the full 32-bit mask of message objects that are enabled. + // + CAN_STS_MSGVAL +} +tCANStsReg; + +//***************************************************************************** +// +// These definitions are used to specify interrupt sources to CANIntEnable() +// and CANIntDisable(). +// +//***************************************************************************** +// +//! This flag is used to allow a CAN controller to generate error +//! interrupts. +// +#define CAN_INT_ERROR 0x00000008 + +// +//! This flag is used to allow a CAN controller to generate status +//! interrupts. +// +#define CAN_INT_STATUS 0x00000004 + +// +//! This flag is used to allow a CAN controller to generate any CAN +//! interrupts. If this is not set, then no interrupts will be generated +//! by the CAN controller. +// +#define CAN_INT_MASTER 0x00000002 + +//***************************************************************************** +// +//! This definition is used to determine the type of message object that will +//! be set up via a call to the CANMessageSet() API. +// +//***************************************************************************** +typedef enum +{ + // + //! Transmit message object. + // + MSG_OBJ_TYPE_TX, + + // + //! Transmit remote request message object + // + MSG_OBJ_TYPE_TX_REMOTE, + + // + //! Receive message object. + // + MSG_OBJ_TYPE_RX, + + // + //! Receive remote request message object. + // + MSG_OBJ_TYPE_RX_REMOTE, + + // + //! Remote frame receive remote, with auto-transmit message object. + // + MSG_OBJ_TYPE_RXTX_REMOTE +} +tMsgObjType; + +//***************************************************************************** +// +// The following enumeration contains all error or status indicators that can +// be returned when calling the CANStatusGet() function. +// +//***************************************************************************** +// +//! CAN controller has entered a Bus Off state. +// +#define CAN_STATUS_BUS_OFF 0x00000080 + +// +//! CAN controller error level has reached warning level. +// +#define CAN_STATUS_EWARN 0x00000040 + +// +//! CAN controller error level has reached error passive level. +// +#define CAN_STATUS_EPASS 0x00000020 + +// +//! A message was received successfully since the last read of this status. +// +#define CAN_STATUS_RXOK 0x00000010 + +// +//! A message was transmitted successfully since the last read of this +//! status. +// +#define CAN_STATUS_TXOK 0x00000008 + +// +//! This is the mask for the last error code field. +// +#define CAN_STATUS_LEC_MSK 0x00000007 + +// +//! There was no error. +// +#define CAN_STATUS_LEC_NONE 0x00000000 + +// +//! A bit stuffing error has occurred. +// +#define CAN_STATUS_LEC_STUFF 0x00000001 + +// +//! A formatting error has occurred. +// +#define CAN_STATUS_LEC_FORM 0x00000002 + +// +//! An acknowledge error has occurred. +// +#define CAN_STATUS_LEC_ACK 0x00000003 + +// +//! The bus remained a bit level of 1 for longer than is allowed. +// +#define CAN_STATUS_LEC_BIT1 0x00000004 + +// +//! The bus remained a bit level of 0 for longer than is allowed. +// +#define CAN_STATUS_LEC_BIT0 0x00000005 + +// +//! A CRC error has occurred. +// +#define CAN_STATUS_LEC_CRC 0x00000006 + +// +//! This is the mask for the CAN Last Error Code (LEC). +// +#define CAN_STATUS_LEC_MASK 0x00000007 + +//***************************************************************************** +// +// API Function prototypes +// +//***************************************************************************** +extern void CANBitTimingGet(unsigned long ulBase, tCANBitClkParms *pClkParms); +extern void CANBitTimingSet(unsigned long ulBase, tCANBitClkParms *pClkParms); +extern unsigned long CANBitRateSet(unsigned long ulBase, + unsigned long ulSourceClock, + unsigned long ulBitRate); +extern void CANDisable(unsigned long ulBase); +extern void CANEnable(unsigned long ulBase); +extern tBoolean CANErrCntrGet(unsigned long ulBase, unsigned long *pulRxCount, + unsigned long *pulTxCount); +extern void CANInit(unsigned long ulBase); +extern void CANIntClear(unsigned long ulBase, unsigned long ulIntClr); +extern void CANIntDisable(unsigned long ulBase, unsigned long ulIntFlags); +extern void CANIntEnable(unsigned long ulBase, unsigned long ulIntFlags); +extern void CANIntRegister(unsigned long ulBase, void (*pfnHandler)(void)); +extern unsigned long CANIntStatus(unsigned long ulBase, + tCANIntStsReg eIntStsReg); +extern void CANIntUnregister(unsigned long ulBase); +extern void CANMessageClear(unsigned long ulBase, unsigned long ulObjID); +extern void CANMessageGet(unsigned long ulBase, unsigned long ulObjID, + tCANMsgObject *pMsgObject, tBoolean bClrPendingInt); +extern void CANMessageSet(unsigned long ulBase, unsigned long ulObjID, + tCANMsgObject *pMsgObject, tMsgObjType eMsgType); +extern tBoolean CANRetryGet(unsigned long ulBase); +extern void CANRetrySet(unsigned long ulBase, tBoolean bAutoRetry); +extern unsigned long CANStatusGet(unsigned long ulBase, tCANStsReg eStatusReg); + +//***************************************************************************** +// +// Several CAN APIs have been renamed, with the original function name being +// deprecated. These defines provide backward compatibility. +// +//***************************************************************************** +#ifndef DEPRECATED +#define CANSetBitTiming(a, b) CANBitTimingSet(a, b) +#define CANGetBitTiming(a, b) CANBitTimingGet(a, b) +#endif + +//***************************************************************************** +// +// Mark the end of the C bindings section for C++ compilers. +// +//***************************************************************************** +#ifdef __cplusplus +} +#endif + +//***************************************************************************** +// +// Close the Doxygen group. +//! @} +// +//***************************************************************************** + +#endif // __CAN_H__ diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/comp.c b/bsp/lm3s_9b9x/Libraries/driverlib/comp.c new file mode 100644 index 0000000000000000000000000000000000000000..0872256dfed94a35f8d782f1d103ea985fb354bd --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/comp.c @@ -0,0 +1,436 @@ +//***************************************************************************** +// +// comp.c - Driver for the analog comparator. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +//***************************************************************************** +// +//! \addtogroup comp_api +//! @{ +// +//***************************************************************************** + +#include "inc/hw_comp.h" +#include "inc/hw_ints.h" +#include "inc/hw_memmap.h" +#include "inc/hw_types.h" +#include "driverlib/comp.h" +#include "driverlib/debug.h" +#include "driverlib/interrupt.h" + +//***************************************************************************** +// +//! Configures a comparator. +//! +//! \param ulBase is the base address of the comparator module. +//! \param ulComp is the index of the comparator to configure. +//! \param ulConfig is the configuration of the comparator. +//! +//! This function will configure a comparator. The \e ulConfig parameter is +//! the result of a logical OR operation between the \b COMP_TRIG_xxx, +//! \b COMP_INT_xxx, \b COMP_ASRCP_xxx, and \b COMP_OUTPUT_xxx values. +//! +//! The \b COMP_TRIG_xxx term can take on the following values: +//! +//! - \b COMP_TRIG_NONE to have no trigger to the ADC. +//! - \b COMP_TRIG_HIGH to trigger the ADC when the comparator output is high. +//! - \b COMP_TRIG_LOW to trigger the ADC when the comparator output is low. +//! - \b COMP_TRIG_FALL to trigger the ADC when the comparator output goes low. +//! - \b COMP_TRIG_RISE to trigger the ADC when the comparator output goes +//! high. +//! - \b COMP_TRIG_BOTH to trigger the ADC when the comparator output goes low +//! or high. +//! +//! The \b COMP_INT_xxx term can take on the following values: +//! +//! - \b COMP_INT_HIGH to generate an interrupt when the comparator output is +//! high. +//! - \b COMP_INT_LOW to generate an interrupt when the comparator output is +//! low. +//! - \b COMP_INT_FALL to generate an interrupt when the comparator output goes +//! low. +//! - \b COMP_INT_RISE to generate an interrupt when the comparator output goes +//! high. +//! - \b COMP_INT_BOTH to generate an interrupt when the comparator output goes +//! low or high. +//! +//! The \b COMP_ASRCP_xxx term can take on the following values: +//! +//! - \b COMP_ASRCP_PIN to use the dedicated Comp+ pin as the reference +//! voltage. +//! - \b COMP_ASRCP_PIN0 to use the Comp0+ pin as the reference voltage (this +//! the same as \b COMP_ASRCP_PIN for the comparator 0). +//! - \b COMP_ASRCP_REF to use the internally generated voltage as the +//! reference voltage. +//! +//! The \b COMP_OUTPUT_xxx term can take on the following values: +//! +//! - \b COMP_OUTPUT_NORMAL to enable a non-inverted output from the comparator +//! to a device pin. +//! - \b COMP_OUTPUT_INVERT to enable an inverted output from the comparator to +//! a device pin. +//! - \b COMP_OUTPUT_NONE is deprecated and behaves the same as +//! \b COMP_OUTPUT_NORMAL. +//! +//! \return None. +// +//***************************************************************************** +void +ComparatorConfigure(unsigned long ulBase, unsigned long ulComp, + unsigned long ulConfig) +{ + // + // Check the arguments. + // + ASSERT(ulBase == COMP_BASE); + ASSERT(ulComp < 3); + + // + // Configure this comparator. + // + HWREG(ulBase + (ulComp * 0x20) + COMP_O_ACCTL0) = ulConfig; +} + +//***************************************************************************** +// +//! Sets the internal reference voltage. +//! +//! \param ulBase is the base address of the comparator module. +//! \param ulRef is the desired reference voltage. +//! +//! This function will set the internal reference voltage value. The voltage +//! is specified as one of the following values: +//! +//! - \b COMP_REF_OFF to turn off the reference voltage +//! - \b COMP_REF_0V to set the reference voltage to 0 V +//! - \b COMP_REF_0_1375V to set the reference voltage to 0.1375 V +//! - \b COMP_REF_0_275V to set the reference voltage to 0.275 V +//! - \b COMP_REF_0_4125V to set the reference voltage to 0.4125 V +//! - \b COMP_REF_0_55V to set the reference voltage to 0.55 V +//! - \b COMP_REF_0_6875V to set the reference voltage to 0.6875 V +//! - \b COMP_REF_0_825V to set the reference voltage to 0.825 V +//! - \b COMP_REF_0_928125V to set the reference voltage to 0.928125 V +//! - \b COMP_REF_0_9625V to set the reference voltage to 0.9625 V +//! - \b COMP_REF_1_03125V to set the reference voltage to 1.03125 V +//! - \b COMP_REF_1_134375V to set the reference voltage to 1.134375 V +//! - \b COMP_REF_1_1V to set the reference voltage to 1.1 V +//! - \b COMP_REF_1_2375V to set the reference voltage to 1.2375 V +//! - \b COMP_REF_1_340625V to set the reference voltage to 1.340625 V +//! - \b COMP_REF_1_375V to set the reference voltage to 1.375 V +//! - \b COMP_REF_1_44375V to set the reference voltage to 1.44375 V +//! - \b COMP_REF_1_5125V to set the reference voltage to 1.5125 V +//! - \b COMP_REF_1_546875V to set the reference voltage to 1.546875 V +//! - \b COMP_REF_1_65V to set the reference voltage to 1.65 V +//! - \b COMP_REF_1_753125V to set the reference voltage to 1.753125 V +//! - \b COMP_REF_1_7875V to set the reference voltage to 1.7875 V +//! - \b COMP_REF_1_85625V to set the reference voltage to 1.85625 V +//! - \b COMP_REF_1_925V to set the reference voltage to 1.925 V +//! - \b COMP_REF_1_959375V to set the reference voltage to 1.959375 V +//! - \b COMP_REF_2_0625V to set the reference voltage to 2.0625 V +//! - \b COMP_REF_2_165625V to set the reference voltage to 2.165625 V +//! - \b COMP_REF_2_26875V to set the reference voltage to 2.26875 V +//! - \b COMP_REF_2_371875V to set the reference voltage to 2.371875 V +//! +//! \return None. +// +//***************************************************************************** +void +ComparatorRefSet(unsigned long ulBase, unsigned long ulRef) +{ + // + // Check the arguments. + // + ASSERT(ulBase == COMP_BASE); + + // + // Set the voltage reference voltage as requested. + // + HWREG(ulBase + COMP_O_ACREFCTL) = ulRef; +} + +//***************************************************************************** +// +//! Gets the current comparator output value. +//! +//! \param ulBase is the base address of the comparator module. +//! \param ulComp is the index of the comparator. +//! +//! This function retrieves the current value of the comparator output. +//! +//! \return Returns \b true if the comparator output is high and \b false if +//! the comparator output is low. +// +//***************************************************************************** +tBoolean +ComparatorValueGet(unsigned long ulBase, unsigned long ulComp) +{ + // + // Check the arguments. + // + ASSERT(ulBase == COMP_BASE); + ASSERT(ulComp < 3); + + // + // Return the appropriate value based on the comparator's present output + // value. + // + if(HWREG(ulBase + (ulComp * 0x20) + COMP_O_ACSTAT0) & COMP_ACSTAT0_OVAL) + { + return(true); + } + else + { + return(false); + } +} + +//***************************************************************************** +// +//! Registers an interrupt handler for the comparator interrupt. +//! +//! \param ulBase is the base address of the comparator module. +//! \param ulComp is the index of the comparator. +//! \param pfnHandler is a pointer to the function to be called when the +//! comparator interrupt occurs. +//! +//! This sets the handler to be called when the comparator interrupt occurs. +//! This will enable the interrupt in the interrupt controller; it is the +//! interrupt-handler's responsibility to clear the interrupt source via +//! ComparatorIntClear(). +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +ComparatorIntRegister(unsigned long ulBase, unsigned long ulComp, + void (*pfnHandler)(void)) +{ + // + // Check the arguments. + // + ASSERT(ulBase == COMP_BASE); + ASSERT(ulComp < 3); + + // + // Register the interrupt handler, returning an error if an error occurs. + // + IntRegister(INT_COMP0 + ulComp, pfnHandler); + + // + // Enable the interrupt in the interrupt controller. + // + IntEnable(INT_COMP0 + ulComp); + + // + // Enable the comparator interrupt. + // + HWREG(ulBase + COMP_O_ACINTEN) |= 1 << ulComp; +} + +//***************************************************************************** +// +//! Unregisters an interrupt handler for a comparator interrupt. +//! +//! \param ulBase is the base address of the comparator module. +//! \param ulComp is the index of the comparator. +//! +//! This function will clear the handler to be called when a comparator +//! interrupt occurs. This will also mask off the interrupt in the interrupt +//! controller so that the interrupt handler no longer is called. +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +ComparatorIntUnregister(unsigned long ulBase, unsigned long ulComp) +{ + // + // Check the arguments. + // + ASSERT(ulBase == COMP_BASE); + ASSERT(ulComp < 3); + + // + // Disable the comparator interrupt. + // + HWREG(ulBase + COMP_O_ACINTEN) &= ~(1 << ulComp); + + // + // Disable the interrupt in the interrupt controller. + // + IntDisable(INT_COMP0 + ulComp); + + // + // Unregister the interrupt handler. + // + IntUnregister(INT_COMP0 + ulComp); +} + +//***************************************************************************** +// +//! Enables the comparator interrupt. +//! +//! \param ulBase is the base address of the comparator module. +//! \param ulComp is the index of the comparator. +//! +//! This function enables generation of an interrupt from the specified +//! comparator. Only comparators whose interrupts are enabled can be reflected +//! to the processor. +//! +//! \return None. +// +//***************************************************************************** +void +ComparatorIntEnable(unsigned long ulBase, unsigned long ulComp) +{ + // + // Check the arguments. + // + ASSERT(ulBase == COMP_BASE); + ASSERT(ulComp < 3); + + // + // Enable the comparator interrupt. + // + HWREG(ulBase + COMP_O_ACINTEN) |= 1 << ulComp; +} + +//***************************************************************************** +// +//! Disables the comparator interrupt. +//! +//! \param ulBase is the base address of the comparator module. +//! \param ulComp is the index of the comparator. +//! +//! This function disables generation of an interrupt from the specified +//! comparator. Only comparators whose interrupts are enabled can be reflected +//! to the processor. +//! +//! \return None. +// +//***************************************************************************** +void +ComparatorIntDisable(unsigned long ulBase, unsigned long ulComp) +{ + // + // Check the arguments. + // + ASSERT(ulBase == COMP_BASE); + ASSERT(ulComp < 3); + + // + // Disable the comparator interrupt. + // + HWREG(ulBase + COMP_O_ACINTEN) &= ~(1 << ulComp); +} + +//***************************************************************************** +// +//! Gets the current interrupt status. +//! +//! \param ulBase is the base address of the comparator module. +//! \param ulComp is the index of the comparator. +//! \param bMasked is \b false if the raw interrupt status is required and +//! \b true if the masked interrupt status is required. +//! +//! This returns the interrupt status for the comparator. Either the raw or +//! the masked interrupt status can be returned. +//! +//! \return \b true if the interrupt is asserted and \b false if it is not +//! asserted. +// +//***************************************************************************** +tBoolean +ComparatorIntStatus(unsigned long ulBase, unsigned long ulComp, + tBoolean bMasked) +{ + // + // Check the arguments. + // + ASSERT(ulBase == COMP_BASE); + ASSERT(ulComp < 3); + + // + // Return either the interrupt status or the raw interrupt status as + // requested. + // + if(bMasked) + { + return(((HWREG(ulBase + COMP_O_ACMIS) >> ulComp) & 1) ? true : false); + } + else + { + return(((HWREG(ulBase + COMP_O_ACRIS) >> ulComp) & 1) ? true : false); + } +} + +//***************************************************************************** +// +//! Clears a comparator interrupt. +//! +//! \param ulBase is the base address of the comparator module. +//! \param ulComp is the index of the comparator. +//! +//! The comparator interrupt is cleared, so that it no longer asserts. This +//! must be done in the interrupt handler to keep it from being called again +//! immediately upon exit. Note that for a level triggered interrupt, the +//! interrupt cannot be cleared until it stops asserting. +//! +//! \note Since there is a write buffer in the Cortex-M3 processor, it may take +//! several clock cycles before the interrupt source is actually cleared. +//! Therefore, it is recommended that the interrupt source be cleared early in +//! the interrupt handler (as opposed to the very last action) to avoid +//! returning from the interrupt handler before the interrupt source is +//! actually cleared. Failure to do so may result in the interrupt handler +//! being immediately reentered (since NVIC still sees the interrupt source +//! asserted). +//! +//! \return None. +// +//***************************************************************************** +void +ComparatorIntClear(unsigned long ulBase, unsigned long ulComp) +{ + // + // Check the arguments. + // + ASSERT(ulBase == COMP_BASE); + ASSERT(ulComp < 3); + + // + // Clear the interrupt. + // + HWREG(ulBase + COMP_O_ACMIS) = 1 << ulComp; +} + +//***************************************************************************** +// +// Close the Doxygen group. +//! @} +// +//***************************************************************************** diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/comp.h b/bsp/lm3s_9b9x/Libraries/driverlib/comp.h new file mode 100644 index 0000000000000000000000000000000000000000..728f4588813b186a3b0c4800b78fb93012f125fa --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/comp.h @@ -0,0 +1,130 @@ +//***************************************************************************** +// +// comp.h - Prototypes for the analog comparator driver. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +#ifndef __COMP_H__ +#define __COMP_H__ + +//***************************************************************************** +// +// If building with a C++ compiler, make all of the definitions in this header +// have a C binding. +// +//***************************************************************************** +#ifdef __cplusplus +extern "C" +{ +#endif + +//***************************************************************************** +// +// Values that can be passed to ComparatorConfigure() as the ulConfig +// parameter. For each group (i.e. COMP_TRIG_xxx, COMP_INT_xxx, etc.), one of +// the values may be selected and combined together with values from the other +// groups via a logical OR. +// +//***************************************************************************** +#define COMP_TRIG_NONE 0x00000000 // No ADC trigger +#define COMP_TRIG_HIGH 0x00000880 // Trigger when high +#define COMP_TRIG_LOW 0x00000800 // Trigger when low +#define COMP_TRIG_FALL 0x00000820 // Trigger on falling edge +#define COMP_TRIG_RISE 0x00000840 // Trigger on rising edge +#define COMP_TRIG_BOTH 0x00000860 // Trigger on both edges +#define COMP_INT_HIGH 0x00000010 // Interrupt when high +#define COMP_INT_LOW 0x00000000 // Interrupt when low +#define COMP_INT_FALL 0x00000004 // Interrupt on falling edge +#define COMP_INT_RISE 0x00000008 // Interrupt on rising edge +#define COMP_INT_BOTH 0x0000000C // Interrupt on both edges +#define COMP_ASRCP_PIN 0x00000000 // Dedicated Comp+ pin +#define COMP_ASRCP_PIN0 0x00000200 // Comp0+ pin +#define COMP_ASRCP_REF 0x00000400 // Internal voltage reference +#ifndef DEPRECATED +#define COMP_OUTPUT_NONE 0x00000000 // No comparator output +#endif +#define COMP_OUTPUT_NORMAL 0x00000000 // Comparator output normal +#define COMP_OUTPUT_INVERT 0x00000002 // Comparator output inverted + +//***************************************************************************** +// +// Values that can be passed to ComparatorSetRef() as the ulRef parameter. +// +//***************************************************************************** +#define COMP_REF_OFF 0x00000000 // Turn off the internal reference +#define COMP_REF_0V 0x00000300 // Internal reference of 0V +#define COMP_REF_0_1375V 0x00000301 // Internal reference of 0.1375V +#define COMP_REF_0_275V 0x00000302 // Internal reference of 0.275V +#define COMP_REF_0_4125V 0x00000303 // Internal reference of 0.4125V +#define COMP_REF_0_55V 0x00000304 // Internal reference of 0.55V +#define COMP_REF_0_6875V 0x00000305 // Internal reference of 0.6875V +#define COMP_REF_0_825V 0x00000306 // Internal reference of 0.825V +#define COMP_REF_0_928125V 0x00000201 // Internal reference of 0.928125V +#define COMP_REF_0_9625V 0x00000307 // Internal reference of 0.9625V +#define COMP_REF_1_03125V 0x00000202 // Internal reference of 1.03125V +#define COMP_REF_1_134375V 0x00000203 // Internal reference of 1.134375V +#define COMP_REF_1_1V 0x00000308 // Internal reference of 1.1V +#define COMP_REF_1_2375V 0x00000309 // Internal reference of 1.2375V +#define COMP_REF_1_340625V 0x00000205 // Internal reference of 1.340625V +#define COMP_REF_1_375V 0x0000030A // Internal reference of 1.375V +#define COMP_REF_1_44375V 0x00000206 // Internal reference of 1.44375V +#define COMP_REF_1_5125V 0x0000030B // Internal reference of 1.5125V +#define COMP_REF_1_546875V 0x00000207 // Internal reference of 1.546875V +#define COMP_REF_1_65V 0x0000030C // Internal reference of 1.65V +#define COMP_REF_1_753125V 0x00000209 // Internal reference of 1.753125V +#define COMP_REF_1_7875V 0x0000030D // Internal reference of 1.7875V +#define COMP_REF_1_85625V 0x0000020A // Internal reference of 1.85625V +#define COMP_REF_1_925V 0x0000030E // Internal reference of 1.925V +#define COMP_REF_1_959375V 0x0000020B // Internal reference of 1.959375V +#define COMP_REF_2_0625V 0x0000030F // Internal reference of 2.0625V +#define COMP_REF_2_165625V 0x0000020D // Internal reference of 2.165625V +#define COMP_REF_2_26875V 0x0000020E // Internal reference of 2.26875V +#define COMP_REF_2_371875V 0x0000020F // Internal reference of 2.371875V + +//***************************************************************************** +// +// Prototypes for the APIs. +// +//***************************************************************************** +extern void ComparatorConfigure(unsigned long ulBase, unsigned long ulComp, + unsigned long ulConfig); +extern void ComparatorRefSet(unsigned long ulBase, unsigned long ulRef); +extern tBoolean ComparatorValueGet(unsigned long ulBase, unsigned long ulComp); +extern void ComparatorIntRegister(unsigned long ulBase, unsigned long ulComp, + void (*pfnHandler)(void)); +extern void ComparatorIntUnregister(unsigned long ulBase, + unsigned long ulComp); +extern void ComparatorIntEnable(unsigned long ulBase, unsigned long ulComp); +extern void ComparatorIntDisable(unsigned long ulBase, unsigned long ulComp); +extern tBoolean ComparatorIntStatus(unsigned long ulBase, unsigned long ulComp, + tBoolean bMasked); +extern void ComparatorIntClear(unsigned long ulBase, unsigned long ulComp); + +//***************************************************************************** +// +// Mark the end of the C bindings section for C++ compilers. +// +//***************************************************************************** +#ifdef __cplusplus +} +#endif + +#endif // __COMP_H__ diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/cpu.c b/bsp/lm3s_9b9x/Libraries/driverlib/cpu.c new file mode 100644 index 0000000000000000000000000000000000000000..e78e8770204ec8bda5038ef8f8f63f90d0d40d78 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/cpu.c @@ -0,0 +1,443 @@ +//***************************************************************************** +// +// cpu.c - Instruction wrappers for special CPU instructions needed by the +// drivers. +// +// Copyright (c) 2006-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +#include "driverlib/cpu.h" + +//***************************************************************************** +// +// Wrapper function for the CPSID instruction. Returns the state of PRIMASK +// on entry. +// +//***************************************************************************** +#if defined(codered) || defined(gcc) || defined(sourcerygxx) +unsigned long __attribute__((naked)) +CPUcpsid(void) +{ + unsigned long ulRet; + + // + // Read PRIMASK and disable interrupts. + // + __asm(" mrs r0, PRIMASK\n" + " cpsid i\n" + " bx lr\n" + : "=r" (ulRet)); + + // + // The return is handled in the inline assembly, but the compiler will + // still complain if there is not an explicit return here (despite the fact + // that this does not result in any code being produced because of the + // naked attribute). + // + return(ulRet); +} +#endif +#if defined(ewarm) +unsigned long +CPUcpsid(void) +{ + // + // Read PRIMASK and disable interrupts. + // + __asm(" mrs r0, PRIMASK\n" + " cpsid i\n"); + + // + // "Warning[Pe940]: missing return statement at end of non-void function" + // is suppressed here to avoid putting a "bx lr" in the inline assembly + // above and a superfluous return statement here. + // +#pragma diag_suppress=Pe940 +} +#pragma diag_default=Pe940 +#endif +#if defined(rvmdk) || defined(__ARMCC_VERSION) +__asm unsigned long +CPUcpsid(void) +{ + // + // Read PRIMASK and disable interrupts. + // + mrs r0, PRIMASK; + cpsid i; + bx lr +} +#endif +#if defined(ccs) +unsigned long +CPUcpsid(void) +{ + // + // Read PRIMASK and disable interrupts. + // + __asm(" mrs r0, PRIMASK\n" + " cpsid i\n" + " bx lr\n"); + + // + // The following keeps the compiler happy, because it wants to see a + // return value from this function. It will generate code to return + // a zero. However, the real return is the "bx lr" above, so the + // return(0) is never executed and the function returns with the value + // you expect in R0. + // + return(0); +} +#endif + +//***************************************************************************** +// +// Wrapper function returning the state of PRIMASK (indicating whether +// interrupts are enabled or disabled). +// +//***************************************************************************** +#if defined(codered) || defined(gcc) || defined(sourcerygxx) +unsigned long __attribute__((naked)) +CPUprimask(void) +{ + unsigned long ulRet; + + // + // Read PRIMASK and disable interrupts. + // + __asm(" mrs r0, PRIMASK\n" + " bx lr\n" + : "=r" (ulRet)); + + // + // The return is handled in the inline assembly, but the compiler will + // still complain if there is not an explicit return here (despite the fact + // that this does not result in any code being produced because of the + // naked attribute). + // + return(ulRet); +} +#endif +#if defined(ewarm) +unsigned long +CPUprimask(void) +{ + // + // Read PRIMASK and disable interrupts. + // + __asm(" mrs r0, PRIMASK\n"); + + // + // "Warning[Pe940]: missing return statement at end of non-void function" + // is suppressed here to avoid putting a "bx lr" in the inline assembly + // above and a superfluous return statement here. + // +#pragma diag_suppress=Pe940 +} +#pragma diag_default=Pe940 +#endif +#if defined(rvmdk) || defined(__ARMCC_VERSION) +__asm unsigned long +CPUprimask(void) +{ + // + // Read PRIMASK and disable interrupts. + // + mrs r0, PRIMASK; + bx lr +} +#endif +#if defined(ccs) +unsigned long +CPUprimask(void) +{ + // + // Read PRIMASK and disable interrupts. + // + __asm(" mrs r0, PRIMASK\n" + " bx lr\n"); + + // + // The following keeps the compiler happy, because it wants to see a + // return value from this function. It will generate code to return + // a zero. However, the real return is the "bx lr" above, so the + // return(0) is never executed and the function returns with the value + // you expect in R0. + // + return(0); +} +#endif + +//***************************************************************************** +// +// Wrapper function for the CPSIE instruction. Returns the state of PRIMASK +// on entry. +// +//***************************************************************************** +#if defined(codered) || defined(gcc) || defined(sourcerygxx) +unsigned long __attribute__((naked)) +CPUcpsie(void) +{ + unsigned long ulRet; + + // + // Read PRIMASK and enable interrupts. + // + __asm(" mrs r0, PRIMASK\n" + " cpsie i\n" + " bx lr\n" + : "=r" (ulRet)); + + // + // The return is handled in the inline assembly, but the compiler will + // still complain if there is not an explicit return here (despite the fact + // that this does not result in any code being produced because of the + // naked attribute). + // + return(ulRet); +} +#endif +#if defined(ewarm) +unsigned long +CPUcpsie(void) +{ + // + // Read PRIMASK and enable interrupts. + // + __asm(" mrs r0, PRIMASK\n" + " cpsie i\n"); + + // + // "Warning[Pe940]: missing return statement at end of non-void function" + // is suppressed here to avoid putting a "bx lr" in the inline assembly + // above and a superfluous return statement here. + // +#pragma diag_suppress=Pe940 +} +#pragma diag_default=Pe940 +#endif +#if defined(rvmdk) || defined(__ARMCC_VERSION) +__asm unsigned long +CPUcpsie(void) +{ + // + // Read PRIMASK and enable interrupts. + // + mrs r0, PRIMASK; + cpsie i; + bx lr +} +#endif +#if defined(ccs) +unsigned long +CPUcpsie(void) +{ + // + // Read PRIMASK and enable interrupts. + // + __asm(" mrs r0, PRIMASK\n" + " cpsie i\n" + " bx lr\n"); + + // + // The following keeps the compiler happy, because it wants to see a + // return value from this function. It will generate code to return + // a zero. However, the real return is the "bx lr" above, so the + // return(0) is never executed and the function returns with the value + // you expect in R0. + // + return(0); +} +#endif + +//***************************************************************************** +// +// Wrapper function for the WFI instruction. +// +//***************************************************************************** +#if defined(codered) || defined(gcc) || defined(sourcerygxx) +void __attribute__((naked)) +CPUwfi(void) +{ + // + // Wait for the next interrupt. + // + __asm(" wfi\n" + " bx lr\n"); +} +#endif +#if defined(ewarm) +void +CPUwfi(void) +{ + // + // Wait for the next interrupt. + // + __asm(" wfi\n"); +} +#endif +#if defined(rvmdk) || defined(__ARMCC_VERSION) +__asm void +CPUwfi(void) +{ + // + // Wait for the next interrupt. + // + wfi; + bx lr +} +#endif +#if defined(ccs) +void +CPUwfi(void) +{ + // + // Wait for the next interrupt. + // + __asm(" wfi\n"); +} +#endif + +//***************************************************************************** +// +// Wrapper function for writing the BASEPRI register. +// +//***************************************************************************** +#if defined(codered) || defined(gcc) || defined(sourcerygxx) +void __attribute__((naked)) +CPUbasepriSet(unsigned long ulNewBasepri) +{ + + // + // Set the BASEPRI register + // + __asm(" msr BASEPRI, r0\n" + " bx lr\n"); +} +#endif +#if defined(ewarm) +void +CPUbasepriSet(unsigned long ulNewBasepri) +{ + // + // Set the BASEPRI register + // + __asm(" msr BASEPRI, r0\n"); +} +#endif +#if defined(rvmdk) || defined(__ARMCC_VERSION) +__asm void +CPUbasepriSet(unsigned long ulNewBasepri) +{ + // + // Set the BASEPRI register + // + msr BASEPRI, r0; + bx lr +} +#endif +#if defined(ccs) +void +CPUbasepriSet(unsigned long ulNewBasepri) +{ + // + // Set the BASEPRI register + // + __asm(" msr BASEPRI, r0\n" + " bx lr\n"); +} +#endif + +//***************************************************************************** +// +// Wrapper function for reading the BASEPRI register. +// +//***************************************************************************** +#if defined(codered) || defined(gcc) || defined(sourcerygxx) +unsigned long __attribute__((naked)) +CPUbasepriGet(void) +{ + unsigned long ulRet; + + // + // Read BASEPRI + // + __asm(" mrs r0, BASEPRI\n" + " bx lr\n" + : "=r" (ulRet)); + + // + // The return is handled in the inline assembly, but the compiler will + // still complain if there is not an explicit return here (despite the fact + // that this does not result in any code being produced because of the + // naked attribute). + // + return(ulRet); +} +#endif +#if defined(ewarm) +unsigned long +CPUbasepriGet(void) +{ + // + // Read BASEPRI + // + __asm(" mrs r0, BASEPRI\n"); + + // + // "Warning[Pe940]: missing return statement at end of non-void function" + // is suppressed here to avoid putting a "bx lr" in the inline assembly + // above and a superfluous return statement here. + // +#pragma diag_suppress=Pe940 +} +#pragma diag_default=Pe940 +#endif +#if defined(rvmdk) || defined(__ARMCC_VERSION) +__asm unsigned long +CPUbasepriGet(void) +{ + // + // Read BASEPRI + // + mrs r0, BASEPRI; + bx lr +} +#endif +#if defined(ccs) +unsigned long +CPUbasepriGet(void) +{ + // + // Read BASEPRI + // + __asm(" mrs r0, BASEPRI\n" + " bx lr\n"); + + // + // The following keeps the compiler happy, because it wants to see a + // return value from this function. It will generate code to return + // a zero. However, the real return is the "bx lr" above, so the + // return(0) is never executed and the function returns with the value + // you expect in R0. + // + return(0); +} +#endif diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/cpu.h b/bsp/lm3s_9b9x/Libraries/driverlib/cpu.h new file mode 100644 index 0000000000000000000000000000000000000000..79da0b1e71a29006fbe2118c27f7d2dc844edf79 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/cpu.h @@ -0,0 +1,60 @@ +//***************************************************************************** +// +// cpu.h - Prototypes for the CPU instruction wrapper functions. +// +// Copyright (c) 2006-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +#ifndef __CPU_H__ +#define __CPU_H__ + +//***************************************************************************** +// +// If building with a C++ compiler, make all of the definitions in this header +// have a C binding. +// +//***************************************************************************** +#ifdef __cplusplus +extern "C" +{ +#endif + +//***************************************************************************** +// +// Prototypes. +// +//***************************************************************************** +extern unsigned long CPUcpsid(void); +extern unsigned long CPUcpsie(void); +extern unsigned long CPUprimask(void); +extern void CPUwfi(void); +extern unsigned long CPUbasepriGet(void); +extern void CPUbasepriSet(unsigned long ulNewBasepri); + +//***************************************************************************** +// +// Mark the end of the C bindings section for C++ compilers. +// +//***************************************************************************** +#ifdef __cplusplus +} +#endif + +#endif // __CPU_H__ diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/cr_project.xml b/bsp/lm3s_9b9x/Libraries/driverlib/cr_project.xml new file mode 100644 index 0000000000000000000000000000000000000000..236096b20a5ad90939ac2441e0dbcc5617fba7ce --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/cr_project.xml @@ -0,0 +1,71 @@ + + + + + {(Makefile|ccs|codered|ewarm|gcc|rvmdk|sourcerygxx)} + {.*\.(ewd|ewp|eww|icf|Opt|sct|sgxx|Uv2|uvopt|uvproj|xml|ld|cmd)} + + + inc + + + codered + + + DEBUG + + + NDEBUG + + + __CODE_RED + codered + PART_LM3S101 + + + -Os + + + -Os + + + -Os + + + -Os + + + ${workspace_loc:/} + + diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/debug.h b/bsp/lm3s_9b9x/Libraries/driverlib/debug.h new file mode 100644 index 0000000000000000000000000000000000000000..1d98ee0c7dd88b63edda6be41e3d72fc459c5f2b --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/debug.h @@ -0,0 +1,53 @@ +//***************************************************************************** +// +// debug.h - Macros for assisting debug of the driver library. +// +// Copyright (c) 2006-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +#ifndef __DEBUG_H__ +#define __DEBUG_H__ + +//***************************************************************************** +// +// Prototype for the function that is called when an invalid argument is passed +// to an API. This is only used when doing a DEBUG build. +// +//***************************************************************************** +extern void __error__(char *pcFilename, unsigned long ulLine); + +//***************************************************************************** +// +// The ASSERT macro, which does the actual assertion checking. Typically, this +// will be for procedure arguments. +// +//***************************************************************************** +#ifdef DEBUG +#define ASSERT(expr) { \ + if(!(expr)) \ + { \ + __error__(__FILE__, __LINE__); \ + } \ + } +#else +#define ASSERT(expr) +#endif + +#endif // __DEBUG_H__ diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/driverlib.Opt b/bsp/lm3s_9b9x/Libraries/driverlib/driverlib.Opt new file mode 100644 index 0000000000000000000000000000000000000000..2265e307499f9f0e2d4da0368f45cd8293fd2a8a --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/driverlib.Opt @@ -0,0 +1,59 @@ +### uVision2 Project, (C) Keil Software +### Do not modify ! + + cExt (*.c) + aExt (*.s*; *.src; *.a*) + oExt (*.obj) + lExt (*.lib) + tExt (*.txt; *.h; *.inc) + pExt (*.plm) + CppX (*.cpp) + DaveTm { 0,0,0,0,0,0,0,0 } + +Target (driverlib), 0x0004 // Tools: 'ARM-ADS' +GRPOPT 1,(Source),1,0,0 +GRPOPT 2,(Documentation),1,0,0 + +OPTFFF 1,1,1,0,0,0,0,0,<.\adc.c> +OPTFFF 1,2,1,0,0,0,0,0,<.\can.c> +OPTFFF 1,3,1,0,0,0,0,0,<.\comp.c> +OPTFFF 1,4,1,0,0,0,0,0,<.\cpu.c> +OPTFFF 1,5,1,0,0,0,0,0,<.\epi.c> +OPTFFF 1,6,1,0,0,0,0,0,<.\ethernet.c> +OPTFFF 1,7,1,0,0,0,0,0,<.\flash.c> +OPTFFF 1,8,1,0,0,0,0,0,<.\gpio.c> +OPTFFF 1,9,1,0,0,0,0,0,<.\hibernate.c> +OPTFFF 1,10,1,0,0,0,0,0,<.\i2c.c> +OPTFFF 1,11,1,0,0,0,0,0,<.\i2s.c> +OPTFFF 1,12,1,0,0,0,0,0,<.\interrupt.c> +OPTFFF 1,13,1,0,0,0,0,0,<.\mpu.c> +OPTFFF 1,14,1,0,0,0,0,0,<.\pwm.c> +OPTFFF 1,15,1,0,0,0,0,0,<.\qei.c> +OPTFFF 1,16,1,0,0,0,0,0,<.\ssi.c> +OPTFFF 1,17,1,0,0,0,0,0,<.\sysctl.c> +OPTFFF 1,18,1,0,0,0,0,0,<.\systick.c> +OPTFFF 1,19,1,0,0,0,0,0,<.\timer.c> +OPTFFF 1,20,1,0,0,0,0,0,<.\uart.c> +OPTFFF 1,21,1,0,0,0,0,0,<.\udma.c> +OPTFFF 1,22,1,0,0,0,0,0,<.\usb.c> +OPTFFF 1,23,1,0,0,0,0,0,<.\watchdog.c> +OPTFFF 2,24,5,2,0,1,1,0,<.\readme.txt> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0,0,0,0,0,0,0,0,217,2,0,0,44,1,0,0 } + +ExtF <.\readme.txt> 1,1,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0,0,0,0,0,0,0,0,217,2,0,0,44,1,0,0 } + +TARGOPT 1, (driverlib) + ADSCLK=20000000 + OPTTT 1,1,1,0 + OPTHX 1,65535,0,0,0 + OPTLX 79,66,8,<.\rvmdk\> + OPTOX 16 + OPTLT 1,1,1,0,1,1,0,1,0,0,0,0 + OPTXL 1,1,1,1,1,1,1,0,0 + OPTFL 1,0,1 + OPTBL 0,(Data Sheet) + OPTDL (SARMCM3.DLL)()(DLM.DLL)(-pLM3S101)(SARMCM3.DLL)()(TLM.DLL)(-pLM3S101) + OPTDBG 48125,1,()()()()()()()()()() (BIN\UL2CM3.DLL)()()() + OPTDF 0x40000002 + OPTLE <> + OPTLC <> +EndOpt diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/driverlib.Uv2 b/bsp/lm3s_9b9x/Libraries/driverlib/driverlib.Uv2 new file mode 100644 index 0000000000000000000000000000000000000000..a426f2a12e7eb166b942ab016622c0233f47bb35 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/driverlib.Uv2 @@ -0,0 +1,122 @@ +### uVision2 Project, (C) Keil Software +### Do not modify ! + +Target (driverlib), 0x0004 // Tools: 'ARM-ADS' + +Group (Source) +Group (Documentation) + +File 1,1,<.\adc.c> 0x0 +File 1,1,<.\can.c> 0x0 +File 1,1,<.\comp.c> 0x0 +File 1,1,<.\cpu.c> 0x0 +File 1,1,<.\epi.c> 0x0 +File 1,1,<.\ethernet.c> 0x0 +File 1,1,<.\flash.c> 0x0 +File 1,1,<.\gpio.c> 0x0 +File 1,1,<.\hibernate.c> 0x0 +File 1,1,<.\i2c.c> 0x0 +File 1,1,<.\i2s.c> 0x0 +File 1,1,<.\interrupt.c> 0x0 +File 1,1,<.\mpu.c> 0x0 +File 1,1,<.\pwm.c> 0x0 +File 1,1,<.\qei.c> 0x0 +File 1,1,<.\ssi.c> 0x0 +File 1,1,<.\sysctl.c> 0x0 +File 1,1,<.\systick.c> 0x0 +File 1,1,<.\timer.c> 0x0 +File 1,1,<.\uart.c> 0x0 +File 1,1,<.\udma.c> 0x0 +File 1,1,<.\usb.c> 0x0 +File 1,1,<.\watchdog.c> 0x0 +File 2,5,<.\readme.txt> 0x0 + + +Options 1,0,0 // Target 'driverlib' + Device (LM3S101) + Vendor (Luminary Micro) + Cpu (IRAM(0x20000000-0x200007FF) IROM(0-0x1FFF) CLOCK(20000000) CPUTYPE("Cortex-M3")) + FlashUt () + StupF ("STARTUP\Luminary\Startup.s" ("Luminary Startup Code")) + FlashDR (UL2CM3(-UU0101L5E -O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FD20000000 -FC800 -FN1 -FF0LM3S_8 -FS00 -FL02000)) + DevID (4079) + Rgf (LM3Sxxx.H) + Mem () + C () + A () + RL () + OH () + DBC_IFX () + DBC_CMS () + DBC_AMS () + DBC_LMS () + UseEnv=0 + EnvBin () + EnvInc () + EnvLib () + EnvReg (˙Luminary\) + OrgReg (˙Luminary\) + TgStat=0 + OutDir (.\rvmdk\) + OutName (driverlib) + GenApp=0 + GenLib=1 + GenHex=0 + Debug=1 + Browse=1 + LstDir (.\rvmdk\) + HexSel=1 + MG32K=0 + TGMORE=0 + RunUsr 0 0 <> + RunUsr 1 0 <> + BrunUsr 0 0 <> + BrunUsr 1 0 <> + CrunUsr 0 0 <> + CrunUsr 1 0 <> + SVCSID <> + GLFLAGS=1790 + ADSFLGA { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } + ACPUTYP (Cortex-M3) + ADSTFLGA { 0,12,0,18,99,0,0,66,0,0,0,0,0,0,0,0,0,0,0,0 } + OCMADSOCM { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } + OCMADSIRAM { 0,0,0,0,32,0,128,0,0 } + OCMADSIROM { 1,0,0,0,0,0,120,1,0 } + OCMADSXRAM { 0,0,0,0,0,0,0,0,0 } + OCR_RVCT { 1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,32,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,32,0,8,0,0,0,0,0,0,0,0,0,0,0 } + RV_STAVEC () + ADSCCFLG { 12,34,0,4,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } + ADSCMISC () + ADSCDEFN (rvmdk) + ADSCUDEF () + ADSCINCD (..;) + ADSASFLG { 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } + ADSAMISC () + ADSADEFN () + ADSAUDEF () + ADSAINCD () + PropFld { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } + IncBld=1 + AlwaysBuild=0 + GenAsm=0 + AsmAsm=0 + PublicsOnly=0 + StopCode=3 + CustArgs () + LibMods () + ADSLDFG { 16,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } + ADSLDTA (0x00000000) + ADSLDDA (0x20000000) + ADSLDSC () + ADSLDIB () + ADSLDIC () + ADSLDMC () + ADSLDIF () + ADSLDDW () + OPTDL (SARMCM3.DLL)()(DLM.DLL)(-pLM3S101)(SARMCM3.DLL)()(TLM.DLL)(-pLM3S101) + OPTDBG 48125,1,()()()()()()()()()() (BIN\UL2CM3.DLL)()()() + FLASH1 { 1,0,0,0,1,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0 } + FLASH2 (BIN\UL2CM3.DLL) + FLASH3 ("" ()) + FLASH4 () +EndOpt diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/driverlib.ewp b/bsp/lm3s_9b9x/Libraries/driverlib/driverlib.ewp new file mode 100644 index 0000000000000000000000000000000000000000..fbce106a60d51c8f51a455e638554352d147bd0d --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/driverlib.ewp @@ -0,0 +1,839 @@ + + + + 1 + + Debug + + ARM + + 1 + + General + 3 + + 14 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICCARM + 2 + + 19 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AARM + 2 + + 7 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + OBJCOPY + 0 + + 1 + 1 + 1 + + + + + + + + + CUSTOM + 3 + + + + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + + + + + + ILINK + 0 + + 5 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + IARCHIVE + 0 + + 0 + 1 + 1 + + + + + + + BILINK + 0 + + + + + Source + + $PROJ_DIR$\adc.c + + + $PROJ_DIR$\can.c + + + $PROJ_DIR$\comp.c + + + $PROJ_DIR$\cpu.c + + + $PROJ_DIR$\epi.c + + + $PROJ_DIR$\ethernet.c + + + $PROJ_DIR$\flash.c + + + $PROJ_DIR$\gpio.c + + + $PROJ_DIR$\hibernate.c + + + $PROJ_DIR$\i2c.c + + + $PROJ_DIR$\i2s.c + + + $PROJ_DIR$\interrupt.c + + + $PROJ_DIR$\mpu.c + + + $PROJ_DIR$\pwm.c + + + $PROJ_DIR$\qei.c + + + $PROJ_DIR$\ssi.c + + + $PROJ_DIR$\sysctl.c + + + $PROJ_DIR$\systick.c + + + $PROJ_DIR$\timer.c + + + $PROJ_DIR$\uart.c + + + $PROJ_DIR$\udma.c + + + $PROJ_DIR$\usb.c + + + $PROJ_DIR$\watchdog.c + + + diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/driverlib.sgxx b/bsp/lm3s_9b9x/Libraries/driverlib/driverlib.sgxx new file mode 100644 index 0000000000000000000000000000000000000000..051c6388a2d9fcc7fb36bd7460a0182ee842511b Binary files /dev/null and b/bsp/lm3s_9b9x/Libraries/driverlib/driverlib.sgxx differ diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/epi.c b/bsp/lm3s_9b9x/Libraries/driverlib/epi.c new file mode 100644 index 0000000000000000000000000000000000000000..eef70f3310489b7a94504d15a7dbd1485cf6e7ed --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/epi.c @@ -0,0 +1,1083 @@ +//***************************************************************************** +// +// epi.c - Driver for the EPI module. +// +// Copyright (c) 2008-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +#include "inc/hw_epi.h" +#include "inc/hw_ints.h" +#include "inc/hw_memmap.h" +#include "inc/hw_types.h" +#include "driverlib/debug.h" +#include "driverlib/epi.h" +#include "driverlib/interrupt.h" + +//***************************************************************************** +// +//! \addtogroup epi_api +//! @{ +// +//***************************************************************************** + +//***************************************************************************** +// +//! Sets the usage mode of the EPI module. +//! +//! \param ulBase is the EPI module base address. +//! \param ulMode is the usage mode of the EPI module. +//! +//! This functions sets the operating mode of the EPI module. The parameter +//! \e ulMode must be one of the following: +//! +//! - \b EPI_MODE_GENERAL - use for general-purpose mode operation +//! - \b EPI_MODE_SDRAM - use with SDRAM device +//! - \b EPI_MODE_HB8 - use with host-bus 8-bit interface +//! - \b EPI_MODE_DISABLE - disable the EPI module +//! +//! Selection of any of the above modes will enable the EPI module, except +//! for \b EPI_MODE_DISABLE which should be used to disable the module. +//! +//! \return None. +// +//***************************************************************************** +void +EPIModeSet(unsigned long ulBase, unsigned long ulMode) +{ + // + // Check the arguments. + // + ASSERT(ulBase == EPI0_BASE); + ASSERT((ulMode == EPI_MODE_GENERAL) || + (ulMode == EPI_MODE_SDRAM) || + (ulMode == EPI_MODE_HB8) || + (ulMode == EPI_MODE_DISABLE)); + + // + // Write the mode word to the register. + // + HWREG(ulBase + EPI_O_CFG) = ulMode; +} + +//***************************************************************************** +// +//! Sets the clock divider for the EPI module. +//! +//! \param ulBase is the EPI module base address. +//! \param ulDivider is the value of the clock divider to be applied to +//! the external interface (0-65535). +//! +//! This functions sets the clock divider(s) that will be used to determine the +//! clock rate of the external interface. The \e ulDivider value is used to +//! derive the EPI clock rate from the system clock based upon the following +//! formula. +//! +//! EPIClock = (Divider == 0) ? SysClk : (SysClk / (((Divider / 2) + 1) * 2)) +//! +//! For example, a divider value of 1 results in an EPI clock rate of half +//! the system clock, value of 2 or 3 yield one quarter of the system clock and +//! a value of 4 results in one sixth of the system clock rate. +//! +//! In cases where a dual chip select mode is in use and different clock rates +//! are required for each chip select, the \e ulDivider parameter must contain +//! two dividers. The lower 16 bits define the divider to be used with CS0n +//! and the upper 16 bits define the divider for CS1n. +//! +//! \return None. +// +//***************************************************************************** +void +EPIDividerSet(unsigned long ulBase, unsigned long ulDivider) +{ + // + // Check the arguments. + // + ASSERT(ulBase == EPI0_BASE); + + // + // Write the divider value to the register. + // + HWREG(ulBase + EPI_O_BAUD) = ulDivider; +} + +//***************************************************************************** +// +//! Configures the SDRAM mode of operation. +//! +//! \param ulBase is the EPI module base address. +//! \param ulConfig is the SDRAM interface configuration. +//! \param ulRefresh is the refresh count in core clocks (0-2047). +//! +//! This function is used to configure the SDRAM interface, when the SDRAM +//! mode is chosen with the function EPIModeSet(). The parameter \e ulConfig +//! is the logical OR of several sets of choices: +//! +//! The processor core frequency must be specified with one of the following: +//! +//! - \b EPI_SDRAM_CORE_FREQ_0_15 - core clock is 0 MHz < clk <= 15 MHz +//! - \b EPI_SDRAM_CORE_FREQ_15_30 - core clock is 15 MHz < clk <= 30 MHz +//! - \b EPI_SDRAM_CORE_FREQ_30_50 - core clock is 30 MHz < clk <= 50 MHz +//! - \b EPI_SDRAM_CORE_FREQ_50_100 - core clock is 50 MHz < clk <= 100 MHz +//! +//! The low power mode is specified with one of the following: +//! +//! - \b EPI_SDRAM_LOW_POWER - enter low power, self-refresh state +//! - \b EPI_SDRAM_FULL_POWER - normal operating state +//! +//! The SDRAM device size is specified with one of the following: +//! +//! - \b EPI_SDRAM_SIZE_64MBIT - 64 Mbit device (8 MB) +//! - \b EPI_SDRAM_SIZE_128MBIT - 128 Mbit device (16 MB) +//! - \b EPI_SDRAM_SIZE_256MBIT - 256 Mbit device (32 MB) +//! - \b EPI_SDRAM_SIZE_512MBIT - 512 Mbit device (64 MB) +//! +//! The parameter \e ulRefresh sets the refresh counter in units of core +//! clock ticks. It is an 11-bit value with a range of 0 - 2047 counts. +//! +//! \return None. +// +//***************************************************************************** +void +EPIConfigSDRAMSet(unsigned long ulBase, unsigned long ulConfig, + unsigned long ulRefresh) +{ + // + // Check the arguments. + // + ASSERT(ulBase == EPI0_BASE); + ASSERT(ulRefresh < 2048); + + // + // Fill in the refresh count field of the configuration word. + // + ulConfig &= ~EPI_SDRAMCFG_RFSH_M; + ulConfig |= ulRefresh << EPI_SDRAMCFG_RFSH_S; + + // + // Write the SDRAM configuration register. + // + HWREG(ulBase + EPI_O_SDRAMCFG) = ulConfig; +} + +//***************************************************************************** +// +//! Configures the interface for Host-bus 8 operation. +//! +//! \param ulBase is the EPI module base address. +//! \param ulConfig is the interface configuration. +//! \param ulMaxWait is the maximum number of external clocks to wait +//! if a FIFO ready signal is holding off the transaction. +//! +//! This function is used to configure the interface when used in Host-bus 8 +//! operation as chosen with the function EPIModeSet(). The parameter +//! \e ulConfig is the logical OR of any of the following: +//! +//! - one of \b EPI_HB8_MODE_ADMUX, \b EPI_HB8_MODE_ADDEMUX, +//! \b EPI_HB8_MODE_SRAM, or \b EPI_HB8_MODE_FIFO to select the HB8 mode +//! - \b EPI_HB8_USE_TXEMPTY - enable TXEMPTY signal with FIFO +//! - \b EPI_HB8_USE_RXFULL - enable RXFULL signal with FIFO +//! - \b EPI_HB8_WRHIGH - use active high write strobe, otherwise it is +//! active low +//! - \b EPI_HB8_RDHIGH - use active high read strobe, otherwise it is +//! active low +//! - one of \b EPI_HB8_WRWAIT_0, \b EPI_HB8_WRWAIT_1, \b EPI_HB8_WRWAIT_2, +//! or \b EPI_HB8_WRWAIT_3 to select the number of write wait states (default +//! is 0 wait states) +//! - one of \b EPI_HB8_RDWAIT_0, \b EPI_HB8_RDWAIT_1, \b EPI_HB8_RDWAIT_2, +//! or \b EPI_HB8_RDWAIT_3 to select the number of read wait states (default +//! is 0 wait states) +//! - \b EPI_HB8_WORD_ACCESS - use Word Access mode to route bytes to the +//! correct byte lanes allowing data to be stored in bits [31:8]. If absent, +//! all data transfers use bits [7:0]. +//! - \b EPI_HB8_CSBAUD_DUAL - use different baud rates when accessing devices +//! on each CSn. CS0n uses the baud rate specified by the lower 16 bits of the +//! divider passed to EPIDividerSet() and CS1n uses the divider passed in the +//! upper 16 bits. If this option is absent, both chip selects use the baud +//! rate resulting from the divider in the lower 16 bits of the parameter passed +//! to EPIDividerSet(). +//! - one of \b EPI_HB8_CSCFG_CS, \b EPI_HB8_CSCFG_ALE, +//! \b EPI_HB8_CSCFG_DUAL_CS or \b EPI_HB8_CSCFG_ALE_DUAL. \b EPI_HB8_CSCFG_CS +//! sets EPI30 to operate as a Chip Select (CSn) signal. When using this mode, +//! \b EPI_HB8_MODE_ADMUX must not be specified. \b EPI_HB8_CSCFG_ALE sets +//! EPI30 to operate as an address latch (ALE). \b EPI_HB8_CSCFG_DUAL_CS sets +//! EPI30 to operate as CS0n and EPI27 as CS1n with the asserted chip select +//! determined from the most significant address bit for the respective external +//! address map. \b EPI_HB8_CSCFG_DUAL_ALE sets EPI30 as an address latch (ALE), +//! EPI27 as CS0n and EPI26 as CS1n with the asserted chip select determined +//! from the most significant address bit for the respective external address +//! map. +//! +//! The parameter \e ulMaxWait is used if the FIFO mode is chosen. If a +//! FIFO is used along with RXFULL or TXEMPTY ready signals, then this +//! parameter determines the maximum number of clocks to wait when the +//! transaction is being held off by by the FIFO using one of these ready +//! signals. A value of 0 means to wait forever. +//! +//! \return None. +// +//***************************************************************************** +void +EPIConfigHB8Set(unsigned long ulBase, unsigned long ulConfig, + unsigned long ulMaxWait) +{ + // + // Check the arguments. + // + ASSERT(ulBase == EPI0_BASE); + ASSERT(ulMaxWait < 256); + + // + // Determine the CS and word access modes. + // + HWREG(ulBase + EPI_O_HB8CFG2) = (((ulConfig & EPI_HB8_WORD_ACCESS) ? + EPI_HB8CFG2_WORD : 0) | + ((ulConfig & EPI_HB8_CSBAUD_DUAL) ? EPI_HB8CFG2_CSBAUD : 0) | ((ulConfig & EPI_HB8_CSCFG_MASK) << 15)); + // + // Fill in the max wait field of the configuration word. + // + ulConfig &= ~EPI_HB8CFG_MAXWAIT_M; + ulConfig |= ulMaxWait << EPI_HB8CFG_MAXWAIT_S; + + // + // Write the main HostBus8 configuration register. + // + HWREG(ulBase + EPI_O_HB8CFG) = ulConfig; +} + +//***************************************************************************** +// +//! Configures the interface for general-purpose mode operation. +//! +//! \param ulBase is the EPI module base address. +//! \param ulConfig is the interface configuration. +//! \param ulFrameCount is the frame size in clocks, if the frame signal +//! is used (0-15). +//! \param ulMaxWait is the maximum number of external clocks to wait +//! when the external clock enable is holding off the transaction (0-255). +//! +//! This function is used to configure the interface when used in +//! general-purpose operation as chosen with the function EPIModeSet(). The +//! parameter +//! \e ulConfig is the logical OR of any of the following: +//! +//! - \b EPI_GPMODE_CLKPIN - interface clock is output on a pin +//! - \b EPI_GPMODE_CLKGATE - clock is stopped when there is no transaction, +//! otherwise it is free-running +//! - \b EPI_GPMODE_RDYEN - the external peripheral drives an iRDY signal into +//! pin EPI0S27. If absent, the peripheral is assumed to be ready at all times. +//! This flag may only be used with a free-running clock (\b EPI_GPMODE_CLKGATE +//! is absent). +//! - \b EPI_GPMODE_FRAMEPIN - framing signal is emitted on a pin +//! - \b EPI_GPMODE_FRAME50 - framing signal is 50/50 duty cycle, otherwise it +//! is a pulse +//! - \b EPI_GPMODE_READWRITE - read and write strobes are emitted on pins +//! - \b EPI_GPMODE_WRITE2CYCLE - a two cycle write is used, otherwise a +//! single-cycle write is used +//! - \b EPI_GPMODE_READ2CYCLE - a two cycle read is used, otherwise a +//! single-cycle read is used +//! - \b EPI_GPMODE_ASIZE_NONE, \b EPI_GPMODE_ASIZE_4, +//! \b EPI_GPMODE_ASIZE_12, or \b EPI_GPMODE_ASIZE_20 to choose no address +//! bus, or and address bus size of 4, 12, or 20 bits +//! - \b EPI_GPMODE_DSIZE_8, \b EPI_GPMODE_DSIZE_16, +//! \b EPI_GPMODE_DSIZE_24, or \b EPI_GPMODE_DSIZE_32 to select a data bus +//! size of 8, 16, 24, or 32 bits +//! - \b EPI_GPMODE_WORD_ACCESS - use Word Access mode to route bytes to the +//! correct byte lanes allowing data to be stored in the upper bits of the word +//! when necessary. +//! +//! The parameter \e ulFrameCount is the number of clocks used to form the +//! framing signal, if the framing signal is used. The behavior depends on +//! whether the frame signal is a pulse or a 50/50 duty cycle. This value +//! is not used if the framing signal is not enabled with the option +//! \b EPI_GPMODE_FRAMEPIN. +//! +//! The parameter \e ulMaxWait is used if the external clock enable is turned +//! on with the \b EPI_GPMODE_CLKENA option is used. In the case that +//! external clock enable is used, this parameter determines the maximum +//! number of clocks to wait when the external clock enable signal is holding +//! off a transaction. A value of 0 means to wait forever. If a non-zero +//! value is used and exceeded, an interrupt will occur and the transaction +//! aborted. +//! +//! \return None. +// +//***************************************************************************** +void +EPIConfigGPModeSet(unsigned long ulBase, unsigned long ulConfig, + unsigned long ulFrameCount, unsigned long ulMaxWait) +{ + // + // Check the arguments. + // + ASSERT(ulBase == EPI0_BASE); + ASSERT(ulFrameCount < 16); + ASSERT(ulMaxWait < 256); + + // + // Set the word access mode. + // + HWREG(ulBase + EPI_O_GPCFG2) = ((ulConfig & EPI_GPMODE_WORD_ACCESS) ? + EPI_GPCFG2_WORD : 0); + + // + // Fill in the frame count field of the configuration word. + // + ulConfig &= ~EPI_GPCFG_FRMCNT_M; + ulConfig |= ulFrameCount << EPI_GPCFG_FRMCNT_S; + + // + // Fill in the max wait field of the configuration word. + // + ulConfig &= ~EPI_GPCFG_MAXWAIT_M; + ulConfig |= ulMaxWait << EPI_GPCFG_MAXWAIT_S; + + // + // Write the non-moded configuration register. + // + HWREG(ulBase + EPI_O_GPCFG) = ulConfig; +} + +//***************************************************************************** +// +//! Configures the address map for the external interface. +//! +//! \param ulBase is the EPI module base address. +//! \param ulMap is the address mapping configuration. +//! +//! This function is used to configure the address mapping for the external +//! interface. This determines the base address of the external memory or +//! device within the processor peripheral and/or memory space. +//! +//! The parameter \e ulMap is the logical OR of the following: +//! +//! - \b EPI_ADDR_PER_SIZE_256B, \b EPI_ADDR_PER_SIZE_64KB, +//! \b EPI_ADDR_PER_SIZE_16MB, or \b EPI_ADDR_PER_SIZE_512MB to choose a +//! peripheral address space of 256 bytes, 64 Kbytes, 16 Mbytes or 512 Mbytes +//! - \b EPI_ADDR_PER_BASE_NONE, \b EPI_ADDR_PER_BASE_A, or +//! \b EPI_ADDR_PER_BASE_C to choose the base address of the peripheral +//! space as none, 0xA0000000, or 0xC0000000 +//! - \b EPI_ADDR_RAM_SIZE_256B, \b EPI_ADDR_RAM_SIZE_64KB, +//! \b EPI_ADDR_RAM_SIZE_16MB, or \b EPI_ADDR_RAM_SIZE_512MB to choose a +//! RAM address space of 256 bytes, 64 Kbytes, 16 Mbytes or 512 Mbytes +//! - \b EPI_ADDR_RAM_BASE_NONE, \b EPI_ADDR_RAM_BASE_6, or +//! \b EPI_ADDR_RAM_BASE_8 to choose the base address of the RAM space +//! as none, 0x60000000, or 0x80000000 +//! +//! \return None. +// +//***************************************************************************** +void +EPIAddressMapSet(unsigned long ulBase, unsigned long ulMap) +{ + // + // Check the arguments. + // + ASSERT(ulBase == EPI0_BASE); + ASSERT(ulMap < 0x100); + + // + // Set the value of the address mapping register. + // + HWREG(ulBase + EPI_O_ADDRMAP) = ulMap; +} + +//***************************************************************************** +// +//! Configures a non-blocking read transaction. +//! +//! \param ulBase is the EPI module base address. +//! \param ulChannel is the read channel (0 or 1). +//! \param ulDataSize is the size of the data items to read. +//! \param ulAddress is the starting address to read. +//! +//! This function is used to configure a non-blocking read channel for a +//! transaction. Two channels are available which can be used in a ping-pong +//! method for continuous reading. It is not necessary to use both channels +//! to perform a non-blocking read. +//! +//! The parameter \e ulDataSize is one of \b EPI_NBCONFIG_SIZE_8, +//! \b EPI_NBCONFIG_SIZE_16, or \b EPI_NBCONFIG_SIZE_32 for 8-bit, 16-bit, +//! or 32-bit sized data transfers. +//! +//! The parameter \e ulAddress is the starting address for the read, relative +//! to the external device. The start of the device is address 0. +//! +//! Once configured, the non-blocking read is started by calling +//! EPINonBlockingReadStart(). If the addresses to be read from the device +//! are in a sequence, it is not necessary to call this function multiple +//! times. Until it is changed, the EPI module will remember the last address +//! that was used for a non-blocking read (per channel). +//! +//! \return None. +// +//***************************************************************************** +void +EPINonBlockingReadConfigure(unsigned long ulBase, unsigned long ulChannel, + unsigned long ulDataSize, unsigned long ulAddress) +{ + unsigned long ulOffset; + + // + // Check the arguments. + // + ASSERT(ulBase == EPI0_BASE); + ASSERT(ulChannel < 2); + ASSERT(ulDataSize < 4); + ASSERT(ulAddress < 0x20000000); + + // + // Compute the offset needed to select the correct channel regs. + // + ulOffset = ulChannel * (EPI_O_RSIZE1 - EPI_O_RSIZE0); + + // + // Write the data size register for the channel. + // + HWREG(ulBase + EPI_O_RSIZE0 + ulOffset) = ulDataSize; + + // + // Write the starting address register for the channel. + // + HWREG(ulBase + EPI_O_RADDR0 + ulOffset) = ulAddress; +} + +//***************************************************************************** +// +//! Starts a non-blocking read transaction. +//! +//! \param ulBase is the EPI module base address. +//! \param ulChannel is the read channel (0 or 1). +//! \param ulCount is the number of items to read (1-4095). +//! +//! This function starts a non-blocking read that was previously configured +//! with the function EPINonBlockingReadConfigure(). Once this function is +//! called, the EPI module will begin reading data from the external device +//! into the read FIFO. The EPI will stop reading when the FIFO fills up +//! and resume reading when the application drains the FIFO, until the +//! total specified count of data items has been read. +//! +//! Once a read transaction is completed and the FIFO drained, another +//! transaction can be started from the next address by calling this +//! function again. +//! +//! \return None. +// +//***************************************************************************** +void +EPINonBlockingReadStart(unsigned long ulBase, unsigned long ulChannel, + unsigned long ulCount) +{ + unsigned long ulOffset; + + // + // Check the arguments. + // + ASSERT(ulBase == EPI0_BASE); + ASSERT(ulChannel < 2); + ASSERT(ulCount < 4096); + + // + // Compute the offset needed to select the correct channel regs. + // + ulOffset = ulChannel * (EPI_O_RPSTD1 - EPI_O_RPSTD0); + + // + // Write to the read count register. + // + HWREG(ulBase + EPI_O_RPSTD0 + ulOffset) = ulCount; +} + +//***************************************************************************** +// +//! Stops a non-blocking read transaction. +//! +//! \param ulBase is the EPI module base address. +//! \param ulChannel is the read channel (0 or 1). +//! +//! This function cancels a non-blocking read transaction that is already +//! in progress. +//! +//! \return None. +// +//***************************************************************************** +void +EPINonBlockingReadStop(unsigned long ulBase, unsigned long ulChannel) +{ + unsigned long ulOffset; + + // + // Check the arguments. + // + ASSERT(ulBase == EPI0_BASE); + ASSERT(ulChannel < 2); + + // + // Compute the offset needed to select the correct channel regs. + // + ulOffset = ulChannel * (EPI_O_RPSTD1 - EPI_O_RPSTD0); + + // + // Write a 0 to the read count register, which will cancel the transaction. + // + HWREG(ulBase + EPI_O_RPSTD0 + ulOffset) = 0; +} + +//***************************************************************************** +// +//! Get the count remaining for a non-blocking transaction. +//! +//! \param ulBase is the EPI module base address. +//! \param ulChannel is the read channel (0 or 1). +//! +//! This function gets the remaining count of items for a non-blocking read +//! transaction. +//! +//! \return The number of items remaining in the non-blocking read transaction. +// +//***************************************************************************** +unsigned long +EPINonBlockingReadCount(unsigned long ulBase, unsigned long ulChannel) +{ + unsigned long ulOffset; + + // + // Check the arguments. + // + ASSERT(ulBase == EPI0_BASE); + ASSERT(ulChannel < 2); + + // + // Compute the offset needed to select the correct channel regs. + // + ulOffset = ulChannel * (EPI_O_RPSTD1 - EPI_O_RPSTD0); + + // + // Read the count remaining and return the value to the caller. + // + return(HWREG(ulBase + EPI_O_RPSTD0 + ulOffset)); +} + +//***************************************************************************** +// +//! Get the count of items available in the read FIFO. +//! +//! \param ulBase is the EPI module base address. +//! +//! This function gets the number of items that are available to read in +//! the read FIFO. The read FIFO is filled by a non-blocking read transaction +//! which is configured by the functions EPINonBlockingReadConfigure() and +//! EPINonBlockingReadStart(). +//! +//! \return The number of items available to read in the read FIFO. +// +//***************************************************************************** +unsigned long +EPINonBlockingReadAvail(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == EPI0_BASE); + + // + // Read the FIFO count and return it to the caller. + // + return(HWREG(ulBase + EPI_O_RFIFOCNT)); +} + +//***************************************************************************** +// +//! Read available data from the read FIFO, as 32-bit data items. +//! +//! \param ulBase is the EPI module base address. +//! \param ulCount is the maximum count of items to read. +//! \param pulBuf is the caller supplied buffer where the read data should +//! be stored. +//! +//! This function reads 32-bit data items from the read FIFO and stores +//! the values in a caller supplied buffer. The function will read and store +//! data from the FIFO until there is no more data in the FIFO or the maximum +//! count is reached as specified in the parameter \e ulCount. The actual +//! count of items will be returned. +//! +//! \return The number of items read from the FIFO. +// +//***************************************************************************** +unsigned long +EPINonBlockingReadGet32(unsigned long ulBase, unsigned long ulCount, + unsigned long *pulBuf) +{ + unsigned long ulCountRead = 0; + + // + // Check the arguments. + // + ASSERT(ulBase == EPI0_BASE); + ASSERT(ulCount < 4096); + ASSERT(pulBuf); + + // + // Read from the FIFO while there are any items to read, and + // the callers specified count is not exceeded. + // + while(HWREG(ulBase + EPI_O_RFIFOCNT) && ulCount--) + { + // + // Read from the FIFO and store in the caller supplied buffer. + // + *pulBuf = HWREG(ulBase + EPI_O_READFIFO); + + // + // Update the caller's buffer pointer and the count of items read. + // + pulBuf++; + ulCountRead++; + } + + // + // Return the count of items read to the caller. + // + return(ulCountRead); +} + +//***************************************************************************** +// +//! Read available data from the read FIFO, as 16-bit data items. +//! +//! \param ulBase is the EPI module base address. +//! \param ulCount is the maximum count of items to read. +//! \param pusBuf is the caller supplied buffer where the read data should +//! be stored. +//! +//! This function reads 16-bit data items from the read FIFO and stores +//! the values in a caller supplied buffer. The function will read and store +//! data from the FIFO until there is no more data in the FIFO or the maximum +//! count is reached as specified in the parameter \e ulCount. The actual +//! count of items will be returned. +//! +//! \return The number of items read from the FIFO. +// +//***************************************************************************** +unsigned long +EPINonBlockingReadGet16(unsigned long ulBase, unsigned long ulCount, + unsigned short *pusBuf) +{ + unsigned long ulCountRead = 0; + + // + // Check the arguments. + // + ASSERT(ulBase == EPI0_BASE); + ASSERT(ulCount < 4096); + ASSERT(pusBuf); + + // + // Read from the FIFO while there are any items to read, and + // the callers specified count is not exceeded. + // + while(HWREG(ulBase + EPI_O_RFIFOCNT) && ulCount--) + { + // + // Read from the FIFO and store in the caller supplied buffer. + // + *pusBuf = (unsigned short)HWREG(ulBase + EPI_O_READFIFO); + + // + // Update the caller's buffer pointer and the count of items read. + // + pusBuf++; + ulCountRead++; + } + + // + // Return the count of items read to the caller. + // + return(ulCountRead); +} + +//***************************************************************************** +// +//! Read available data from the read FIFO, as 8-bit data items. +//! +//! \param ulBase is the EPI module base address. +//! \param ulCount is the maximum count of items to read. +//! \param pucBuf is the caller supplied buffer where the read data should +//! be stored. +//! +//! This function reads 8-bit data items from the read FIFO and stores +//! the values in a caller supplied buffer. The function will read and store +//! data from the FIFO until there is no more data in the FIFO or the maximum +//! count is reached as specified in the parameter \e ulCount. The actual +//! count of items will be returned. +//! +//! \return The number of items read from the FIFO. +// +//***************************************************************************** +unsigned long +EPINonBlockingReadGet8(unsigned long ulBase, unsigned long ulCount, + unsigned char *pucBuf) +{ + unsigned long ulCountRead = 0; + + // + // Check the arguments. + // + ASSERT(ulBase == EPI0_BASE); + ASSERT(ulCount < 4096); + ASSERT(pucBuf); + + // + // Read from the FIFO while there are any items to read, and + // the callers specified count is not exceeded. + // + while(HWREG(ulBase + EPI_O_RFIFOCNT) && ulCount--) + { + // + // Read from the FIFO and store in the caller supplied buffer. + // + *pucBuf = (unsigned char)HWREG(ulBase + EPI_O_READFIFO); + + // + // Update the caller's buffer pointer and the count of items read. + // + pucBuf++; + ulCountRead++; + } + + // + // Return the count of items read to the caller. + // + return(ulCountRead); +} + +//***************************************************************************** +// +//! Configures the read FIFO. +//! +//! \param ulBase is the EPI module base address. +//! \param ulConfig is the FIFO configuration. +//! +//! This function configures the FIFO trigger levels and error +//! generation. The parameter \e ulConfig is the logical OR of the +//! following: +//! +//! - \b EPI_FIFO_CONFIG_WTFULLERR - enables an error interrupt when a write is +//! attempted and the write FIFO is full +//! - \b EPI_FIFO_CONFIG_RSTALLERR - enables an error interrupt when a read is +//! stalled due to an interleaved write or other reason +//! - \b EPI_FIFO_CONFIG_TX_EMPTY, \b EPI_FIFO_CONFIG_TX_1_4, +//! \b EPI_FIFO_CONFIG_TX_1_2, or \b EPI_FIFO_CONFIG_TX_3_4 to set the +//! TX FIFO trigger level to empty, 1/4, 1/2, or 3/4 level +//! - \b EPI_FIFO_CONFIG_RX_1_8, \b EPI_FIFO_CONFIG_RX_1_4, +//! \b EPI_FIFO_CONFIG_RX_1_2, \b EPI_FIFO_CONFIG_RX_3_4, +//! \b EPI_FIFO_CONFIG_RX_7_8, or \b EPI_FIFO_CONFIG_RX_FULL to set the +//! RX FIFO trigger level to 1/8, 1/4, 1/2, 3/4, 7/8 or full level +//! +//! \return None. +// +//***************************************************************************** +void +EPIFIFOConfig(unsigned long ulBase, unsigned long ulConfig) +{ + // + // Check the arguments. + // + ASSERT(ulBase == EPI0_BASE); + ASSERT(ulConfig == (ulConfig & 0x00030077)); + + // + // Load the configuration into the FIFO config reg. + // + HWREG(ulBase + EPI_O_FIFOLVL) = ulConfig; +} + +//***************************************************************************** +// +//! Reads the number of empty slots in the write transaction FIFO. +//! +//! \param ulBase is the EPI module base address. +//! +//! This function returns the number of slots available in the transaction +//! FIFO. It can be used in a polling method to avoid attempting a write +//! that would stall. +//! +//! \return The number of empty slots in the transaction FIFO. +// +//***************************************************************************** +unsigned long +EPIWriteFIFOCountGet(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == EPI0_BASE); + + // + // Read the FIFO count and return it to the caller. + // + return(HWREG(ulBase + EPI_O_WFIFOCNT)); +} + +//***************************************************************************** +// +//! Enables EPI interrupt sources. +//! +//! \param ulBase is the EPI module base address. +//! \param ulIntFlags is a bit mask of the interrupt sources to be enabled. +//! +//! This function enables the specified EPI sources to generate interrupts. +//! The \e ulIntFlags parameter can be the logical OR of any of the following +//! values: +//! +//! - \b EPI_INT_TXREQ - transmit FIFO is below the trigger level +//! - \b EPI_INT_RXREQ - read FIFO is above the trigger level +//! - \b EPI_INT_ERR - an error condition occurred +//! +//! \return Returns None. +// +//***************************************************************************** +void +EPIIntEnable(unsigned long ulBase, unsigned long ulIntFlags) +{ + // + // Check the arguments. + // + ASSERT(ulBase == EPI0_BASE); + ASSERT(ulIntFlags < 16); + + // + // Write the interrupt flags mask to the mask register. + // + HWREG(ulBase + EPI_O_IM) |= ulIntFlags; +} + +//***************************************************************************** +// +//! Disables EPI interrupt sources. +//! +//! \param ulBase is the EPI module base address. +//! \param ulIntFlags is a bit mask of the interrupt sources to be disabled. +//! +//! This function disables the specified EPI sources for interrupt +//! generation. The \e ulIntFlags parameter can be the logical OR +//! of any of the following values: \b EPI_INT_RXREQ, \b EPI_INT_TXREQ, or +//! \b I2S_INT_ERR. +//! +//! \return Returns None. +// +//***************************************************************************** +void +EPIIntDisable(unsigned long ulBase, unsigned long ulIntFlags) +{ + // + // Check the arguments. + // + ASSERT(ulBase == EPI0_BASE); + ASSERT(ulIntFlags < 16); + + // + // Write the interrupt flags mask to the mask register. + // + HWREG(ulBase + EPI_O_IM) &= ~ulIntFlags; +} + +//***************************************************************************** +// +//! Gets the EPI interrupt status. +//! +//! \param ulBase is the EPI module base address. +//! \param bMasked is set \b true to get the masked interrupt status, or +//! \b false to get the raw interrupt status. +//! +//! This function returns the EPI interrupt status. It can return either +//! the raw or masked interrupt status. +//! +//! \return Returns the masked or raw EPI interrupt status, as a bit field +//! of any of the following values: \b EPI_INT_TXREQ, \b EPI_INT_RXREQ, +//! or \b EPI_INT_ERR +// +//***************************************************************************** +unsigned long +EPIIntStatus(unsigned long ulBase, tBoolean bMasked) +{ + // + // Check the arguments. + // + ASSERT(ulBase == EPI0_BASE); + + // + // Return either the interrupt status or the raw interrupt status as + // requested. + // + if(bMasked) + { + return(HWREG(ulBase + EPI_O_MIS)); + } + else + { + return(HWREG(ulBase + EPI_O_RIS)); + } +} + +//***************************************************************************** +// +//! Gets the EPI error interrupt status. +//! +//! \param ulBase is the EPI module base address. +//! +//! This function returns the error status of the EPI. If the return value of +//! the function EPIIntStatus() has the flag \b EPI_INT_ERR set, then this +//! function can be used to determine the cause of the error. +//! +//! This function returns a bit mask of error flags, which can be the logical +//! OR of any of the following: +//! +//! - \b EPI_INT_ERR_WTFULL - occurs when a write stalled when the transaction +//! FIFO was full +//! - \b EPI_INT_ERR_RSTALL - occurs when a read stalled +//! - \b EPI_INT_ERR_TIMEOUT - occurs when the external clock enable held +//! off a transaction longer than the configured maximum wait time +//! +//! \return Returns the interrupt error flags as the logical OR of any of +//! the following: \b EPI_INT_ERR_WTFULL, \b EPI_INT_ERR_RSTALL, or +//! \b EPI_INT_ERR_TIMEOUT. +// +//***************************************************************************** +unsigned long +EPIIntErrorStatus(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == EPI0_BASE); + + // + // Read the error status and return to caller. + // + return(HWREG(ulBase + EPI_O_EISC)); +} + +//***************************************************************************** +// +//! Clears pending EPI error sources. +//! +//! \param ulBase is the EPI module base address. +//! \param ulErrFlags is a bit mask of the error sources to be cleared. +//! +//! This function clears the specified pending EPI errors. The \e ulErrFlags +//! parameter can be the logical OR of any of the following values: +//! \b EPI_INT_ERR_WTFULL, \b EPI_INT_ERR_RSTALL, or \b EPI_INT_ERR_TIMEOUT. +//! +//! \return Returns None. +// +//***************************************************************************** +void +EPIIntErrorClear(unsigned long ulBase, unsigned long ulErrFlags) +{ + // + // Check the arguments. + // + ASSERT(ulBase == EPI0_BASE); + ASSERT(ulErrFlags < 16); + + // + // Write the error flags to the register to clear the pending errors. + // + HWREG(ulBase + EPI_O_EISC) = ulErrFlags; +} + +//***************************************************************************** +// +//! Registers an interrupt handler for the EPI module. +//! +//! \param ulBase is the EPI module base address. +//! \param pfnHandler is a pointer to the function to be called when the +//! interrupt is activated. +//! +//! This sets and enables the handler to be called when the EPI module +//! generates an interrupt. Specific EPI interrupts must still be enabled +//! with the EPIIntEnable() function. +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +EPIIntRegister(unsigned long ulBase, void (*pfnHandler)(void)) +{ + // + // Check the arguments. + // + ASSERT(ulBase == EPI0_BASE); + ASSERT(pfnHandler); + + // + // Register the interrupt handler. + // + IntRegister(INT_EPI0, pfnHandler); + + // + // Enable the EPI interface interrupt. + // + IntEnable(INT_EPI0); +} + +//***************************************************************************** +// +//! Unregisters an interrupt handler for the EPI module. +//! +//! \param ulBase is the EPI module base address. +//! +//! This function will disable and clear the handler to be called when the +//! EPI interrupt occurs. +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +EPIIntUnregister(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == EPI0_BASE); + + // + // Disable the EPI interface interrupt. + // + IntDisable(INT_EPI0); + + // + // Unregister the interrupt handler. + // + IntUnregister(INT_EPI0); +} + +//***************************************************************************** +// +// Close the Doxygen group. +//! @} +// +//***************************************************************************** diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/epi.h b/bsp/lm3s_9b9x/Libraries/driverlib/epi.h new file mode 100644 index 0000000000000000000000000000000000000000..3aa55e3384602a4808d4667b7848ae3711c2c9aa --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/epi.h @@ -0,0 +1,270 @@ +//***************************************************************************** +// +// epi.h - Prototypes and macros for the EPI module. +// +// Copyright (c) 2008-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +#ifndef __EPI_H__ +#define __EPI_H__ + +//***************************************************************************** +// +// If building with a C++ compiler, make all of the definitions in this header +// have a C binding. +// +//***************************************************************************** +#ifdef __cplusplus +extern "C" +{ +#endif + +//***************************************************************************** +// +// Values that can be passed to EPIModeSet() +// +//***************************************************************************** +#define EPI_MODE_GENERAL 0x00000010 +#define EPI_MODE_SDRAM 0x00000011 +#define EPI_MODE_HB8 0x00000012 +#define EPI_MODE_DISABLE 0x00000000 + +//***************************************************************************** +// +// Values that can be passed to EPIConfigSDRAMSet() +// +//***************************************************************************** +#define EPI_SDRAM_CORE_FREQ_0_15 0x00000000 +#define EPI_SDRAM_CORE_FREQ_15_30 0x40000000 +#define EPI_SDRAM_CORE_FREQ_30_50 0x80000000 +#define EPI_SDRAM_CORE_FREQ_50_100 0xC0000000 +#define EPI_SDRAM_LOW_POWER 0x00000200 +#define EPI_SDRAM_FULL_POWER 0x00000000 +#define EPI_SDRAM_SIZE_64MBIT 0x00000000 +#define EPI_SDRAM_SIZE_128MBIT 0x00000001 +#define EPI_SDRAM_SIZE_256MBIT 0x00000002 +#define EPI_SDRAM_SIZE_512MBIT 0x00000003 + +//***************************************************************************** +// +// Values that can be passed to EPIConfigGPModeSet() +// +//***************************************************************************** +#define EPI_GPMODE_CLKPIN 0x80000000 +#define EPI_GPMODE_CLKGATE 0x40000000 +#define EPI_GPMODE_RDYEN 0x10000000 +#define EPI_GPMODE_FRAMEPIN 0x08000000 +#define EPI_GPMODE_FRAME50 0x04000000 +#define EPI_GPMODE_READWRITE 0x00200000 +#define EPI_GPMODE_WRITE2CYCLE 0x00080000 +#define EPI_GPMODE_READ2CYCLE 0x00040000 +#define EPI_GPMODE_ASIZE_NONE 0x00000000 +#define EPI_GPMODE_ASIZE_4 0x00000010 +#define EPI_GPMODE_ASIZE_12 0x00000020 +#define EPI_GPMODE_ASIZE_20 0x00000030 +#define EPI_GPMODE_DSIZE_8 0x00000000 +#define EPI_GPMODE_DSIZE_16 0x00000001 +#define EPI_GPMODE_DSIZE_24 0x00000002 +#define EPI_GPMODE_DSIZE_32 0x00000003 +#define EPI_GPMODE_WORD_ACCESS 0x00000100 + +//***************************************************************************** +// +// Values that can be passed to EPIConfigHB8ModeSet() +// +//***************************************************************************** +#define EPI_HB8_USE_TXEMPTY 0x00800000 +#define EPI_HB8_USE_RXFULL 0x00400000 +#define EPI_HB8_WRHIGH 0x00200000 +#define EPI_HB8_RDHIGH 0x00100000 +#define EPI_HB8_WRWAIT_0 0x00000000 +#define EPI_HB8_WRWAIT_1 0x00000040 +#define EPI_HB8_WRWAIT_2 0x00000080 +#define EPI_HB8_WRWAIT_3 0x000000C0 +#define EPI_HB8_RDWAIT_0 0x00000000 +#define EPI_HB8_RDWAIT_1 0x00000010 +#define EPI_HB8_RDWAIT_2 0x00000020 +#define EPI_HB8_RDWAIT_3 0x00000030 +#define EPI_HB8_MODE_ADMUX 0x00000000 +#define EPI_HB8_MODE_ADDEMUX 0x00000001 +#define EPI_HB8_MODE_SRAM 0x00000002 +#define EPI_HB8_MODE_FIFO 0x00000003 +#define EPI_HB8_WORD_ACCESS 0x00000100 +#define EPI_HB8_CSCFG_ALE 0x00000000 +#define EPI_HB8_CSCFG_CS 0x00000200 +#define EPI_HB8_CSCFG_DUAL_CS 0x00000400 +#define EPI_HB8_CSCFG_ALE_DUAL_CS 0x00000600 +#define EPI_HB8_CSBAUD_DUAL 0x00000800 + +#define EPI_HB8_CSCFG_MASK 0x00000600 + +//***************************************************************************** +// +// Values that can be passed to EPIConfigSDRAMSet() +// +//***************************************************************************** +#define EPI_ADDR_PER_SIZE_256B 0x00000000 +#define EPI_ADDR_PER_SIZE_64KB 0x00000040 +#define EPI_ADDR_PER_SIZE_16MB 0x00000080 +#define EPI_ADDR_PER_SIZE_256MB 0x000000C0 +#define EPI_ADDR_PER_BASE_NONE 0x00000000 +#define EPI_ADDR_PER_BASE_A 0x00000010 +#define EPI_ADDR_PER_BASE_C 0x00000020 +#define EPI_ADDR_RAM_SIZE_256B 0x00000000 +#define EPI_ADDR_RAM_SIZE_64KB 0x00000004 +#define EPI_ADDR_RAM_SIZE_16MB 0x00000008 +#define EPI_ADDR_RAM_SIZE_256MB 0x0000000C +#define EPI_ADDR_RAM_BASE_NONE 0x00000000 +#define EPI_ADDR_RAM_BASE_6 0x00000001 +#define EPI_ADDR_RAM_BASE_8 0x00000002 + +//***************************************************************************** +// +// Values that can be passed to EPINonBlockingReadConfigure() +// +//***************************************************************************** +#define EPI_NBCONFIG_SIZE_8 1 +#define EPI_NBCONFIG_SIZE_16 2 +#define EPI_NBCONFIG_SIZE_32 3 + +//***************************************************************************** +// +// Values that can be passed to EPIFIFOConfig() +// +//***************************************************************************** +#define EPI_FIFO_CONFIG_WTFULLERR 0x00020000 +#define EPI_FIFO_CONFIG_RSTALLERR 0x00010000 +#define EPI_FIFO_CONFIG_TX_EMPTY 0x00000000 +#define EPI_FIFO_CONFIG_TX_1_4 0x00000020 +#define EPI_FIFO_CONFIG_TX_1_2 0x00000030 +#define EPI_FIFO_CONFIG_TX_3_4 0x00000040 +#define EPI_FIFO_CONFIG_RX_1_8 0x00000001 +#define EPI_FIFO_CONFIG_RX_1_4 0x00000002 +#define EPI_FIFO_CONFIG_RX_1_2 0x00000003 +#define EPI_FIFO_CONFIG_RX_3_4 0x00000004 +#define EPI_FIFO_CONFIG_RX_7_8 0x00000005 +#define EPI_FIFO_CONFIG_RX_FULL 0x00000006 + +//***************************************************************************** +// +// Values that can be passed to EPIIntEnable(), EPIIntDisable(), or returned +// as flags from EPIIntStatus() +// +//***************************************************************************** +#define EPI_INT_TXREQ 0x00000004 +#define EPI_INT_RXREQ 0x00000002 +#define EPI_INT_ERR 0x00000001 + +//***************************************************************************** +// +// Values that can be passed to EPIIntErrorClear(), or returned as flags from +// EPIIntErrorStatus() +// +//***************************************************************************** +#define EPI_INT_ERR_WTFULL 0x00000004 +#define EPI_INT_ERR_RSTALL 0x00000002 +#define EPI_INT_ERR_TIMEOUT 0x00000001 + +//***************************************************************************** +// +// API Function prototypes +// +//***************************************************************************** +extern void EPIModeSet(unsigned long ulBase, unsigned long ulMode); +extern void EPIDividerSet(unsigned long ulBase, unsigned long ulDivider); +extern void EPIConfigSDRAMSet(unsigned long ulBase, unsigned long ulConfig, + unsigned long ulRefresh); +extern void EPIConfigGPModeSet(unsigned long ulBase, unsigned long ulConfig, + unsigned long ulFrameCount, + unsigned long ulMaxWait); +extern void EPIConfigHB8Set(unsigned long ulBase, unsigned long ulConfig, + unsigned long ulMaxWait); +extern void EPIAddressMapSet(unsigned long ulBase, unsigned long ulMap); +extern void EPINonBlockingReadConfigure(unsigned long ulBase, + unsigned long ulChannel, + unsigned long ulDataSize, + unsigned long ulAddress); +extern void EPINonBlockingReadStart(unsigned long ulBase, + unsigned long ulChannel, + unsigned long ulCount); +extern void EPINonBlockingReadStop(unsigned long ulBase, + unsigned long ulChannel); +extern unsigned long EPINonBlockingReadCount(unsigned long ulBase, + unsigned long ulChannel); +extern unsigned long EPINonBlockingReadAvail(unsigned long ulBase); +extern unsigned long EPINonBlockingReadGet32(unsigned long ulBase, + unsigned long ulCount, + unsigned long *pulBuf); +extern unsigned long EPINonBlockingReadGet16(unsigned long ulBase, + unsigned long ulCount, + unsigned short *pusBuf); +extern unsigned long EPINonBlockingReadGet8(unsigned long ulBase, + unsigned long ulCount, + unsigned char *pucBuf); +extern void EPIFIFOConfig(unsigned long ulBase, unsigned long ulConfig); +extern unsigned long EPIWriteFIFOCountGet(unsigned long ulBase); +extern void EPIIntEnable(unsigned long ulBase, unsigned long ulIntFlags); +extern void EPIIntDisable(unsigned long ulBase, unsigned long ulIntFlags); +extern unsigned long EPIIntStatus(unsigned long ulBase, tBoolean bMasked); +extern unsigned long EPIIntErrorStatus(unsigned long ulBase); +extern void EPIIntErrorClear(unsigned long ulBase, unsigned long ulErrFlags); +extern void EPIIntRegister(unsigned long ulBase, void (*pfnHandler)(void)); +extern void EPIIntUnregister(unsigned long ulBase); + +//***************************************************************************** +// +// Several EPI APIs and labels have been renamed, with the original definition +// name being deprecated. These defines provide backward compatibility. +// +//***************************************************************************** +#ifndef DEPRECATED +#define EPI_MODE_NONE EPI_MODE_GENERAL +#define EPI_NONMODE_CLKPIN EPI_GPMODE_CLKPIN +#define EPI_NONMODE_CLKSTOP EPI_GPMODE_CLKGATE +#define EPI_NONMODE_CLKENA EPI_GPMODE_RDYEN +#define EPI_NONMODE_FRAMEPIN EPI_GPMODE_FRAMEPIN +#define EPI_NONMODE_FRAME50 EPI_GPMODE_FRAME50 +#define EPI_NONMODE_READWRITE EPI_GPMODE_READWRITE +#define EPI_NONMODE_WRITE2CYCLE EPI_GPMODE_WRITE2CYCLE +#define EPI_NONMODE_READ2CYCLE EPI_GPMODE_READ2CYCLE +#define EPI_NONMODE_ASIZE_NONE EPI_GPMODE_ASIZE_NONE +#define EPI_NONMODE_ASIZE_4 EPI_GPMODE_ASIZE_4 +#define EPI_NONMODE_ASIZE_12 EPI_GPMODE_ASIZE_12 +#define EPI_NONMODE_ASIZE_20 EPI_GPMODE_ASIZE_20 +#define EPI_NONMODE_DSIZE_8 EPI_GPMODE_DSIZE_8 +#define EPI_NONMODE_DSIZE_16 EPI_GPMODE_DSIZE_16 +#define EPI_NONMODE_DSIZE_24 EPI_GPMODE_DSIZE_24 +#define EPI_NONMODE_DSIZE_32 EPI_GPMODE_DSIZE_32 +#define EPI_NONMODE_WORD_ACCESS EPI_GPMODE_WORD_ACCESS + +#define EPINonBlockingWriteCount(a) EPIWriteFIFOCountGet(a) +#define EPIConfigNoModeSet(a, b, c, d) EPIConfigGPModeSet((a), (b), (c), (d)) +#endif + +//***************************************************************************** +// +// Mark the end of the C bindings section for C++ compilers. +// +//***************************************************************************** +#ifdef __cplusplus +} +#endif + +#endif // __EPI_H__ diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/ethernet.c b/bsp/lm3s_9b9x/Libraries/driverlib/ethernet.c new file mode 100644 index 0000000000000000000000000000000000000000..c341bbd1cfc0355d2a872bff6eaf3f403b3600e9 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/ethernet.c @@ -0,0 +1,1277 @@ +//***************************************************************************** +// +// ethernet.c - Driver for the Integrated Ethernet Controller +// +// Copyright (c) 2006-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +//***************************************************************************** +// +//! \addtogroup ethernet_api +//! @{ +// +//***************************************************************************** + +#include "inc/hw_ethernet.h" +#include "inc/hw_ints.h" +#include "inc/hw_memmap.h" +#include "inc/hw_types.h" +#include "driverlib/debug.h" +#include "driverlib/ethernet.h" +#include "driverlib/interrupt.h" + +//***************************************************************************** +// +//! Initializes the Ethernet controller for operation. +//! +//! \param ulBase is the base address of the controller. +//! \param ulEthClk is the rate of the clock supplied to the Ethernet module. +//! +//! This function will prepare the Ethernet controller for first time use in +//! a given hardware/software configuration. This function should be called +//! before any other Ethernet API functions are called. +//! +//! The peripheral clock will be the same as the processor clock. This will be +//! the value returned by SysCtlClockGet(), or it can be explicitly hard-coded +//! if it is constant and known (to save the code/execution overhead of a call +//! to SysCtlClockGet()). +//! +//! This function replaces the original EthernetInit() API and performs the +//! same actions. A macro is provided in ethernet.h to map the +//! original API to this API. +//! +//! \note If the device configuration is changed (for example, the system clock +//! is reprogrammed to a different speed), then the Ethernet controller must be +//! disabled by calling the EthernetDisable() function and the controller must +//! be reinitialized by calling the EthernetInitExpClk() function again. After +//! the controller has been reinitialized, the controller should be +//! reconfigured using the appropriate Ethernet API calls. +//! +//! \return None. +// +//***************************************************************************** +void +EthernetInitExpClk(unsigned long ulBase, unsigned long ulEthClk) +{ + unsigned long ulDiv; + + // + // Check the arguments. + // + ASSERT(ulBase == ETH_BASE); + + // + // Set the Management Clock Divider register for access to the PHY + // register set (via EthernetPHYRead/Write). + // + // The MDC clock divided down from the system clock using the following + // formula. A maximum of 2.5MHz is allowed for F(mdc). + // + // F(mdc) = F(sys) / (2 * (div + 1)) + // div = (F(sys) / (2 * F(mdc))) - 1 + // div = (F(sys) / 2 / F(mdc)) - 1 + // + // Note: Because we should round up, to ensure we don't violate the + // maximum clock speed, we can simplify this as follows: + // + // div = F(sys) / 2 / F(mdc) + // + // For example, given a system clock of 6.0MHz, and a div value of 1, + // the mdc clock would be programmed as 1.5 MHz. + // + ulDiv = (ulEthClk / 2) / 2500000; + HWREG(ulBase + MAC_O_MDV) = (ulDiv & MAC_MDV_DIV_M); +} + +//***************************************************************************** +// +//! Sets the configuration of the Ethernet controller. +//! +//! \param ulBase is the base address of the controller. +//! \param ulConfig is the configuration for the controller. +//! +//! After the EthernetInitExpClk() function has been called, this API function +//! can be used to configure the various features of the Ethernet controller. +//! +//! The Ethernet controller provides three control registers that are used +//! to configure the controller's operation. The transmit control register +//! provides settings to enable full duplex operation, to auto-generate the +//! frame check sequence, and to pad the transmit packets to the minimum +//! length as required by the IEEE standard. The receive control register +//! provides settings to enable reception of packets with bad frame check +//! sequence values and to enable multi-cast or promiscuous modes. The +//! timestamp control register provides settings that enable support logic in +//! the controller that allow the use of the General Purpose Timer 3 to capture +//! timestamps for the transmitted and received packets. +//! +//! The \e ulConfig parameter is the logical OR of the following values: +//! +//! - \b ETH_CFG_TS_TSEN - Enable TX and RX interrupt status as CCP timer +//! inputs +//! - \b ETH_CFG_RX_BADCRCDIS - Disable reception of packets with a bad CRC +//! - \b ETH_CFG_RX_PRMSEN - Enable promiscuous mode reception (all packets) +//! - \b ETH_CFG_RX_AMULEN - Enable reception of multicast packets +//! - \b ETH_CFG_TX_DPLXEN - Enable full duplex transmit mode +//! - \b ETH_CFG_TX_CRCEN - Enable transmit with auto CRC generation +//! - \b ETH_CFG_TX_PADEN - Enable padding of transmit data to minimum size +//! +//! These bit-mapped values are programmed into the transmit, receive, and/or +//! timestamp control register. +//! +//! \return None. +// +//***************************************************************************** +void +EthernetConfigSet(unsigned long ulBase, unsigned long ulConfig) +{ + unsigned long ulTemp; + + // + // Check the arguments. + // + ASSERT(ulBase == ETH_BASE); + ASSERT((ulConfig & ~(ETH_CFG_TX_DPLXEN | ETH_CFG_TX_CRCEN | + ETH_CFG_TX_PADEN | ETH_CFG_RX_BADCRCDIS | + ETH_CFG_RX_PRMSEN | ETH_CFG_RX_AMULEN | + ETH_CFG_TS_TSEN)) == 0); + + // + // Setup the Transmit Control Register. + // + ulTemp = HWREG(ulBase + MAC_O_TCTL); + ulTemp &= ~(MAC_TCTL_DUPLEX | MAC_TCTL_CRC | MAC_TCTL_PADEN); + ulTemp |= ulConfig & 0x0FF; + HWREG(ulBase + MAC_O_TCTL) = ulTemp; + + // + // Setup the Receive Control Register. + // + ulTemp = HWREG(ulBase + MAC_O_RCTL); + ulTemp &= ~(MAC_RCTL_BADCRC | MAC_RCTL_PRMS | MAC_RCTL_AMUL); + ulTemp |= (ulConfig >> 8) & 0x0FF; + HWREG(ulBase + MAC_O_RCTL) = ulTemp; + + // + // Setup the Time Stamp Configuration register. + // + ulTemp = HWREG(ulBase + MAC_O_TS); + ulTemp &= ~(MAC_TS_TSEN); + ulTemp |= (ulConfig >> 16) & 0x0FF; + HWREG(ulBase + MAC_O_TS) = ulTemp; +} + +//***************************************************************************** +// +//! Gets the current configuration of the Ethernet controller. +//! +//! \param ulBase is the base address of the controller. +//! +//! This function will query the control registers of the Ethernet controller +//! and return a bit-mapped configuration value. +//! +//! \sa The description of the EthernetConfigSet() function provides detailed +//! information for the bit-mapped configuration values that will be returned. +//! +//! \return Returns the bit-mapped Ethernet controller configuration value. +// +//***************************************************************************** +unsigned long +EthernetConfigGet(unsigned long ulBase) +{ + unsigned long ulConfig; + + // + // Check the arguments. + // + ASSERT(ulBase == ETH_BASE); + + // + // Read and return the Ethernet controller configuration parameters, + // properly shifted into the appropriate bit field positions. + // + ulConfig = HWREG(ulBase + MAC_O_TS) << 16; + ulConfig |= (HWREG(ulBase + MAC_O_RCTL) & ~(MAC_RCTL_RXEN)) << 8; + ulConfig |= HWREG(ulBase + MAC_O_TCTL) & ~(MAC_TCTL_TXEN); + return(ulConfig); +} + +//***************************************************************************** +// +//! Sets the MAC address of the Ethernet controller. +//! +//! \param ulBase is the base address of the controller. +//! \param pucMACAddr is the pointer to the array of MAC-48 address octets. +//! +//! This function will program the IEEE-defined MAC-48 address specified in +//! \e pucMACAddr into the Ethernet controller. This address is used by the +//! Ethernet controller for hardware-level filtering of incoming Ethernet +//! packets (when promiscuous mode is not enabled). +//! +//! The MAC-48 address is defined as 6 octets, illustrated by the following +//! example address. The numbers are shown in hexadecimal format. +//! +//! AC-DE-48-00-00-80 +//! +//! In this representation, the first three octets (AC-DE-48) are the +//! Organizationally Unique Identifier (OUI). This is a number assigned by +//! the IEEE to an organization that requests a block of MAC addresses. The +//! last three octets (00-00-80) are a 24-bit number managed by the OUI owner +//! to uniquely identify a piece of hardware within that organization that is +//! to be connected to the Ethernet. +//! +//! In this representation, the octets are transmitted from left to right, +//! with the ``AC'' octet being transmitted first and the ``80'' octet being +//! transmitted last. Within an octet, the bits are transmitted LSB to MSB. +//! For this address, the first bit to be transmitted would be ``0'', the LSB +//! of ``AC'', and the last bit to be transmitted would be ``1'', the MSB of +//! ``80''. +//! +//! \return None. +// +//***************************************************************************** +void +EthernetMACAddrSet(unsigned long ulBase, unsigned char *pucMACAddr) +{ + unsigned long ulTemp; + unsigned char *pucTemp = (unsigned char *)&ulTemp; + + // + // Check the arguments. + // + ASSERT(ulBase == ETH_BASE); + ASSERT(pucMACAddr != 0); + + // + // Program the MAC Address into the device. The first four bytes of the + // MAC Address are placed into the IA0 register. The remaining two bytes + // of the MAC address are placed into the IA1 register. + // + pucTemp[0] = pucMACAddr[0]; + pucTemp[1] = pucMACAddr[1]; + pucTemp[2] = pucMACAddr[2]; + pucTemp[3] = pucMACAddr[3]; + HWREG(ulBase + MAC_O_IA0) = ulTemp; + ulTemp = 0; + pucTemp[0] = pucMACAddr[4]; + pucTemp[1] = pucMACAddr[5]; + HWREG(ulBase + MAC_O_IA1) = ulTemp; +} + +//***************************************************************************** +// +//! Gets the MAC address of the Ethernet controller. +//! +//! \param ulBase is the base address of the controller. +//! \param pucMACAddr is the pointer to the location in which to store the +//! array of MAC-48 address octets. +//! +//! This function will read the currently programmed MAC address into the +//! \e pucMACAddr buffer. +//! +//! \sa Refer to EthernetMACAddrSet() API description for more details about +//! the MAC address format. +//! +//! \return None. +// +//***************************************************************************** +void +EthernetMACAddrGet(unsigned long ulBase, unsigned char *pucMACAddr) +{ + unsigned long ulTemp; + unsigned char *pucTemp = (unsigned char *)&ulTemp; + + // + // Check the arguments. + // + ASSERT(ulBase == ETH_BASE); + ASSERT(pucMACAddr != 0); + + // + // Read the MAC address from the device. The first four bytes of the + // MAC address are read from the IA0 register. The remaining two bytes + // of the MAC addres + // + ulTemp = HWREG(ulBase + MAC_O_IA0); + pucMACAddr[0] = pucTemp[0]; + pucMACAddr[1] = pucTemp[1]; + pucMACAddr[2] = pucTemp[2]; + pucMACAddr[3] = pucTemp[3]; + ulTemp = HWREG(ulBase + MAC_O_IA1); + pucMACAddr[4] = pucTemp[0]; + pucMACAddr[5] = pucTemp[1]; +} + +//***************************************************************************** +// +//! Enables the Ethernet controller for normal operation. +//! +//! \param ulBase is the base address of the controller. +//! +//! Once the Ethernet controller has been configured using the +//! EthernetConfigSet() function and the MAC address has been programmed using +//! the EthernetMACAddrSet() function, this API function can be called to +//! enable the controller for normal operation. +//! +//! This function will enable the controller's transmitter and receiver, and +//! will reset the receive FIFO. +//! +//! \return None. +// +//***************************************************************************** +void +EthernetEnable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == ETH_BASE); + + // + // Reset the receive FIFO. + // + HWREG(ulBase + MAC_O_RCTL) |= MAC_RCTL_RSTFIFO; + + // + // Enable the Ethernet receiver. + // + HWREG(ulBase + MAC_O_RCTL) |= MAC_RCTL_RXEN; + + // + // Enable Ethernet transmitter. + // + HWREG(ulBase + MAC_O_TCTL) |= MAC_TCTL_TXEN; + + // + // Reset the receive FIFO again, after the receiver has been enabled. + // + HWREG(ulBase + MAC_O_RCTL) |= MAC_RCTL_RSTFIFO; +} + +//***************************************************************************** +// +//! Disables the Ethernet controller. +//! +//! \param ulBase is the base address of the controller. +//! +//! When terminating operations on the Ethernet interface, this function should +//! be called. This function will disable the transmitter and receiver, and +//! will clear out the receive FIFO. +//! +//! \return None. +// +//***************************************************************************** +void +EthernetDisable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == ETH_BASE); + + // + // Reset the receive FIFO. + // + HWREG(ulBase + MAC_O_RCTL) |= MAC_RCTL_RSTFIFO; + + // + // Disable the Ethernet transmitter. + // + HWREG(ulBase + MAC_O_TCTL) &= ~(MAC_TCTL_TXEN); + + // + // Disable the Ethernet receiver. + // + HWREG(ulBase + MAC_O_RCTL) &= ~(MAC_RCTL_RXEN); + + // + // Reset the receive FIFO again, after the receiver has been disabled. + // + HWREG(ulBase + MAC_O_RCTL) |= MAC_RCTL_RSTFIFO; +} + +//***************************************************************************** +// +//! Check for packet available from the Ethernet controller. +//! +//! \param ulBase is the base address of the controller. +//! +//! The Ethernet controller provides a register that contains the number of +//! packets available in the receive FIFO. When the last bytes of a packet are +//! successfully received (that is, the frame check sequence bytes), the packet +//! count is incremented. Once the packet has been fully read (including the +//! frame check sequence bytes) from the FIFO, the packet count will be +//! decremented. +//! +//! \return Returns \b true if there are one or more packets available in the +//! receive FIFO, including the current packet being read, and \b false +//! otherwise. +// +//***************************************************************************** +tBoolean +EthernetPacketAvail(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == ETH_BASE); + + // + // Return the availability of packets. + // + return((HWREG(ulBase + MAC_O_NP) & MAC_NP_NPR_M) ? true : false); +} + +//***************************************************************************** +// +//! Checks for packet space available in the Ethernet controller. +//! +//! \param ulBase is the base address of the controller. +//! +//! The Ethernet controller's transmit FIFO is designed to support a single +//! packet at a time. After the packet has been written into the FIFO, the +//! transmit request bit must be set to enable the transmission of the packet. +//! Only after the packet has been transmitted can a new packet be written +//! into the FIFO. This function will simply check to see if a packet is +//! in progress. If so, there is no space available in the transmit FIFO. +//! +//! \return Returns \b true if a space is available in the transmit FIFO, and +//! \b false otherwise. +// +//***************************************************************************** +tBoolean +EthernetSpaceAvail(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == ETH_BASE); + + // + // Return the availability of space. + // + return((HWREG(ulBase + MAC_O_TR) & MAC_TR_NEWTX) ? false : true); +} + +//***************************************************************************** +// +//! \internal +//! +//! Internal function for reading a packet from the Ethernet controller. +//! +//! \param ulBase is the base address of the controller. +//! \param pucBuf is the pointer to the packet buffer. +//! \param lBufLen is the maximum number of bytes to be read into the buffer. +//! +//! Based on the following table of how the receive frame is stored in the +//! receive FIFO, this function will extract a packet from the FIFO and store +//! it in the packet buffer that was passed in. +//! +//! Format of the data in the RX FIFO is as follows: +//! +//! \verbatim +//! +---------+----------+----------+----------+----------+ +//! | | 31:24 | 23:16 | 15:8 | 7:0 | +//! +---------+----------+----------+----------+----------+ +//! | Word 0 | DA 2 | DA 1 | FL MSB | FL LSB | +//! +---------+----------+----------+----------+----------+ +//! | Word 1 | DA 6 | DA 5 | DA 4 | DA 3 | +//! +---------+----------+----------+----------+----------+ +//! | Word 2 | SA 4 | SA 3 | SA 2 | SA 1 | +//! +---------+----------+----------+----------+----------+ +//! | Word 3 | FT LSB | FT MSB | SA 6 | SA 5 | +//! +---------+----------+----------+----------+----------+ +//! | Word 4 | DATA 4 | DATA 3 | DATA 2 | DATA 1 | +//! +---------+----------+----------+----------+----------+ +//! | Word 5 | DATA 8 | DATA 7 | DATA 6 | DATA 5 | +//! +---------+----------+----------+----------+----------+ +//! | Word 6 | DATA 12 | DATA 11 | DATA 10 | DATA 9 | +//! +---------+----------+----------+----------+----------+ +//! | ... | | | | | +//! +---------+----------+----------+----------+----------+ +//! | Word X | DATA n | DATA n-1 | DATA n-2 | DATA n-3 | +//! +---------+----------+----------+----------+----------+ +//! | Word Y | FCS 4 | FCS 3 | FCS 2 | FCS 1 | +//! +---------+----------+----------+----------+----------+ +//! \endverbatim +//! +//! Where FL is Frame Length, (FL + DA + SA + FT + DATA + FCS) Bytes. +//! Where DA is Destination (MAC) Address. +//! Where SA is Source (MAC) Address. +//! Where FT is Frame Type (or Frame Length for Ethernet). +//! Where DATA is Payload Data for the Ethernet Frame. +//! Where FCS is the Frame Check Sequence. +//! +//! \return Returns the negated packet length \b -n if the packet is too large +//! for \e pucBuf, and returns the packet length \b n otherwise. +// +//***************************************************************************** +static long +EthernetPacketGetInternal(unsigned long ulBase, unsigned char *pucBuf, + long lBufLen) +{ + unsigned long ulTemp; + long lFrameLen, lTempLen; + long i = 0; + + // + // Read WORD 0 (see format above) from the FIFO, set the receive + // Frame Length and store the first two bytes of the destination + // address in the receive buffer. + // + ulTemp = HWREG(ulBase + MAC_O_DATA); + lFrameLen = (long)(ulTemp & 0xFFFF); + pucBuf[i++] = (unsigned char) ((ulTemp >> 16) & 0xff); + pucBuf[i++] = (unsigned char) ((ulTemp >> 24) & 0xff); + + // + // Read all but the last WORD into the receive buffer. + // + lTempLen = (lBufLen < (lFrameLen - 6)) ? lBufLen : (lFrameLen - 6); + while(i <= (lTempLen - 4)) + { + *(unsigned long *)&pucBuf[i] = HWREG(ulBase + MAC_O_DATA); + i += 4; + } + + // + // Read the last 1, 2, or 3 BYTES into the buffer + // + if(i < lTempLen) + { + ulTemp = HWREG(ulBase + MAC_O_DATA); + if(i == lTempLen - 3) + { + pucBuf[i++] = ((ulTemp >> 0) & 0xff); + pucBuf[i++] = ((ulTemp >> 8) & 0xff); + pucBuf[i++] = ((ulTemp >> 16) & 0xff); + i += 1; + } + else if(i == lTempLen - 2) + { + pucBuf[i++] = ((ulTemp >> 0) & 0xff); + pucBuf[i++] = ((ulTemp >> 8) & 0xff); + i += 2; + } + else if(i == lTempLen - 1) + { + pucBuf[i++] = ((ulTemp >> 0) & 0xff); + i += 3; + } + } + + // + // Read any remaining WORDS (that did not fit into the buffer). + // + while(i < (lFrameLen - 2)) + { + ulTemp = HWREG(ulBase + MAC_O_DATA); + i += 4; + } + + // + // If frame was larger than the buffer, return the "negative" frame length + // + lFrameLen -= 6; + if(lFrameLen > lBufLen) + { + return(-lFrameLen); + } + + // + // Return the Frame Length + // + return(lFrameLen); +} + +//***************************************************************************** +// +//! Receives a packet from the Ethernet controller. +//! +//! \param ulBase is the base address of the controller. +//! \param pucBuf is the pointer to the packet buffer. +//! \param lBufLen is the maximum number of bytes to be read into the buffer. +//! +//! This function reads a packet from the receive FIFO of the controller and +//! places it into \e pucBuf. If no packet is available the function will +//! return immediately. Otherwise, the function will read the entire packet +//! from the receive FIFO. If there are more bytes in the packet than will fit +//! into \e pucBuf (as specified by \e lBufLen), the function will return the +//! negated length of the packet and the buffer will contain \e lBufLen bytes +//! of the packet. Otherwise, the function will return the length of the +//! packet that was read and \e pucBuf will contain the entire packet +//! (excluding the frame check sequence bytes). +//! +//! This function replaces the original EthernetPacketNonBlockingGet() API and +//! performs the same actions. A macro is provided in ethernet.h to +//! map the original API to this API. +//! +//! \note This function will return immediately if no packet is available. +//! +//! \return Returns \b 0 if no packet is available, the negated packet length +//! \b -n if the packet is too large for \e pucBuf, and the packet length \b n +//! otherwise. +// +//***************************************************************************** +long +EthernetPacketGetNonBlocking(unsigned long ulBase, unsigned char *pucBuf, + long lBufLen) +{ + // + // Check the arguments. + // + ASSERT(ulBase == ETH_BASE); + ASSERT(pucBuf != 0); + ASSERT(lBufLen > 0); + + // + // Check to see if any packets are available. + // + if((HWREG(ulBase + MAC_O_NP) & MAC_NP_NPR_M) == 0) + { + return(0); + } + + // + // Read the packet, and return. + // + return(EthernetPacketGetInternal(ulBase, pucBuf, lBufLen)); +} + +//***************************************************************************** +// +//! Waits for a packet from the Ethernet controller. +//! +//! \param ulBase is the base address of the controller. +//! \param pucBuf is the pointer to the packet buffer. +//! \param lBufLen is the maximum number of bytes to be read into the buffer. +//! +//! This function reads a packet from the receive FIFO of the controller and +//! places it into \e pucBuf. The function will wait until a packet is +//! available in the FIFO. Then the function will read the entire packet +//! from the receive FIFO. If there are more bytes in the packet than will +//! fit into \e pucBuf (as specified by \e lBufLen), the function will return +//! the negated length of the packet and the buffer will contain \e lBufLen +//! bytes of the packet. Otherwise, the function will return the length of +//! the packet that was read and \e pucBuf will contain the entire packet +//! (excluding the frame check sequence bytes). +//! +//! \note This function is blocking and will not return until a packet arrives. +//! +//! \return Returns the negated packet length \b -n if the packet is too large +//! for \e pucBuf, and returns the packet length \b n otherwise. +// +//***************************************************************************** +long +EthernetPacketGet(unsigned long ulBase, unsigned char *pucBuf, + long lBufLen) +{ + // + // Check the arguments. + // + ASSERT(ulBase == ETH_BASE); + ASSERT(pucBuf != 0); + ASSERT(lBufLen > 0); + + // + // Wait for a packet to become available + // + while((HWREG(ulBase + MAC_O_NP) & MAC_NP_NPR_M) == 0) + { + } + + // + // Read the packet + // + return(EthernetPacketGetInternal(ulBase, pucBuf, lBufLen)); +} + +//***************************************************************************** +// +//! \internal +//! +//! Internal function for sending a packet to the Ethernet controller. +//! +//! \param ulBase is the base address of the controller. +//! \param pucBuf is the pointer to the packet buffer. +//! \param lBufLen is number of bytes in the packet to be transmitted. +//! +//! Puts a packet into the transmit FIFO of the controller. +//! +//! Format of the data in the TX FIFO is as follows: +//! +//! \verbatim +//! +---------+----------+----------+----------+----------+ +//! | | 31:24 | 23:16 | 15:8 | 7:0 | +//! +---------+----------+----------+----------+----------+ +//! | Word 0 | DA 2 | DA 1 | PL MSB | PL LSB | +//! +---------+----------+----------+----------+----------+ +//! | Word 1 | DA 6 | DA 5 | DA 4 | DA 3 | +//! +---------+----------+----------+----------+----------+ +//! | Word 2 | SA 4 | SA 3 | SA 2 | SA 1 | +//! +---------+----------+----------+----------+----------+ +//! | Word 3 | FT LSB | FT MSB | SA 6 | SA 5 | +//! +---------+----------+----------+----------+----------+ +//! | Word 4 | DATA 4 | DATA 3 | DATA 2 | DATA 1 | +//! +---------+----------+----------+----------+----------+ +//! | Word 5 | DATA 8 | DATA 7 | DATA 6 | DATA 5 | +//! +---------+----------+----------+----------+----------+ +//! | Word 6 | DATA 12 | DATA 11 | DATA 10 | DATA 9 | +//! +---------+----------+----------+----------+----------+ +//! | ... | | | | | +//! +---------+----------+----------+----------+----------+ +//! | Word X | DATA n | DATA n-1 | DATA n-2 | DATA n-3 | +//! +---------+----------+----------+----------+----------+ +//! \endverbatim +//! +//! Where PL is Payload Length, (DATA) only +//! Where DA is Destination (MAC) Address +//! Where SA is Source (MAC) Address +//! Where FT is Frame Type (or Frame Length for Ethernet) +//! Where DATA is Payload Data for the Ethernet Frame +//! +//! \return Returns the negated packet length \b -lBufLen if the packet is too +//! large for FIFO, and the packet length \b lBufLen otherwise. +// +//***************************************************************************** +static long +EthernetPacketPutInternal(unsigned long ulBase, unsigned char *pucBuf, + long lBufLen) +{ + unsigned long ulTemp; + long i = 0; + + // + // If the packet is too large, return the negative packet length as + // an error code. + // + if(lBufLen > (2048 - 2)) + { + return(-lBufLen); + } + + // + // Build and write WORD 0 (see format above) to the transmit FIFO. + // + ulTemp = (unsigned long)(lBufLen - 14); + ulTemp |= (pucBuf[i++] << 16); + ulTemp |= (pucBuf[i++] << 24); + HWREG(ulBase + MAC_O_DATA) = ulTemp; + + // + // Write each subsequent WORD n to the transmit FIFO, except for the last + // WORD (if the word does not contain 4 bytes). + // + while(i <= (lBufLen - 4)) + { + HWREG(ulBase + MAC_O_DATA) = *(unsigned long *)&pucBuf[i]; + i += 4; + } + + // + // Build the last word of the remaining 1, 2, or 3 bytes, and store + // the WORD into the transmit FIFO. + // + if(i != lBufLen) + { + if(i == (lBufLen - 3)) + { + ulTemp = (pucBuf[i++] << 0); + ulTemp |= (pucBuf[i++] << 8); + ulTemp |= (pucBuf[i++] << 16); + HWREG(ulBase + MAC_O_DATA) = ulTemp; + } + else if(i == (lBufLen - 2)) + { + ulTemp = (pucBuf[i++] << 0); + ulTemp |= (pucBuf[i++] << 8); + HWREG(ulBase + MAC_O_DATA) = ulTemp; + } + else if(i == (lBufLen - 1)) + { + ulTemp = (pucBuf[i++] << 0); + HWREG(ulBase + MAC_O_DATA) = ulTemp; + } + } + + // + // Activate the transmitter + // + HWREG(ulBase + MAC_O_TR) = MAC_TR_NEWTX; + + // + // Return the Buffer Length transmitted. + // + return(lBufLen); +} + +//***************************************************************************** +// +//! Sends a packet to the Ethernet controller. +//! +//! \param ulBase is the base address of the controller. +//! \param pucBuf is the pointer to the packet buffer. +//! \param lBufLen is number of bytes in the packet to be transmitted. +//! +//! This function writes \e lBufLen bytes of the packet contained in \e pucBuf +//! into the transmit FIFO of the controller and then activates the +//! transmitter for this packet. If no space is available in the FIFO, the +//! function will return immediately. If space is available, the +//! function will return once \e lBufLen bytes of the packet have been placed +//! into the FIFO and the transmitter has been started. The function will not +//! wait for the transmission to complete. The function will return the +//! negated \e lBufLen if the length is larger than the space available in +//! the transmit FIFO. +//! +//! This function replaces the original EthernetPacketNonBlockingPut() API and +//! performs the same actions. A macro is provided in ethernet.h to +//! map the original API to this API. +//! +//! \note This function does not block and will return immediately if no space +//! is available for the transmit packet. +//! +//! \return Returns \b 0 if no space is available in the transmit FIFO, the +//! negated packet length \b -lBufLen if the packet is too large for FIFO, and +//! the packet length \b lBufLen otherwise. +// +//***************************************************************************** +long +EthernetPacketPutNonBlocking(unsigned long ulBase, unsigned char *pucBuf, + long lBufLen) +{ + // + // Check the arguments. + // + ASSERT(ulBase == ETH_BASE); + ASSERT(pucBuf != 0); + ASSERT(lBufLen > 0); + + // + // Check if the transmit FIFO is in use and return the appropriate code. + // + if(HWREG(ulBase + MAC_O_TR) & MAC_TR_NEWTX) + { + return(0); + } + + // + // Send the packet and return. + // + return(EthernetPacketPutInternal(ulBase, pucBuf, lBufLen)); +} + +//***************************************************************************** +// +//! Waits to send a packet from the Ethernet controller. +//! +//! \param ulBase is the base address of the controller. +//! \param pucBuf is the pointer to the packet buffer. +//! \param lBufLen is number of bytes in the packet to be transmitted. +//! +//! This function writes \e lBufLen bytes of the packet contained in \e pucBuf +//! into the transmit FIFO of the controller and then activates the transmitter +//! for this packet. This function will wait until the transmit FIFO is empty. +//! Once space is available, the function will return once \e lBufLen bytes of +//! the packet have been placed into the FIFO and the transmitter has been +//! started. The function will not wait for the transmission to complete. The +//! function will return the negated \e lBufLen if the length is larger than +//! the space available in the transmit FIFO. +//! +//! \note This function blocks and will wait until space is available for the +//! transmit packet before returning. +//! +//! \return Returns the negated packet length \b -lBufLen if the packet is too +//! large for FIFO, and the packet length \b lBufLen otherwise. +// +//***************************************************************************** +long +EthernetPacketPut(unsigned long ulBase, unsigned char *pucBuf, + long lBufLen) +{ + // + // Check the arguments. + // + ASSERT(ulBase == ETH_BASE); + ASSERT(pucBuf != 0); + ASSERT(lBufLen > 0); + + // + // Wait for current packet (if any) to complete. + // + while(HWREG(ulBase + MAC_O_TR) & MAC_TR_NEWTX) + { + } + + // + // Send the packet and return. + // + return(EthernetPacketPutInternal(ulBase, pucBuf, lBufLen)); +} + +//***************************************************************************** +// +//! Registers an interrupt handler for an Ethernet interrupt. +//! +//! \param ulBase is the base address of the controller. +//! \param pfnHandler is a pointer to the function to be called when the +//! enabled Ethernet interrupts occur. +//! +//! This function sets the handler to be called when the Ethernet interrupt +//! occurs. This will enable the global interrupt in the interrupt controller; +//! specific Ethernet interrupts must be enabled via EthernetIntEnable(). It +//! is the interrupt handler's responsibility to clear the interrupt source. +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +EthernetIntRegister(unsigned long ulBase, void (*pfnHandler)(void)) +{ + // + // Check the arguments. + // + ASSERT(ulBase == ETH_BASE); + ASSERT(pfnHandler != 0); + + // + // Register the interrupt handler. + // + IntRegister(INT_ETH, pfnHandler); + + // + // Enable the Ethernet interrupt. + // + IntEnable(INT_ETH); +} + +//***************************************************************************** +// +//! Unregisters an interrupt handler for an Ethernet interrupt. +//! +//! \param ulBase is the base address of the controller. +//! +//! This function unregisters the interrupt handler. This will disable the +//! global interrupt in the interrupt controller so that the interrupt handler +//! no longer is called. +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +EthernetIntUnregister(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == ETH_BASE); + + // + // Disable the interrupt. + // + IntDisable(INT_ETH); + + // + // Unregister the interrupt handler. + // + IntUnregister(INT_ETH); +} + +//***************************************************************************** +// +//! Enables individual Ethernet interrupt sources. +//! +//! \param ulBase is the base address of the controller. +//! \param ulIntFlags is the bit mask of the interrupt sources to be enabled. +//! +//! Enables the indicated Ethernet interrupt sources. Only the sources that +//! are enabled can be reflected to the processor interrupt; disabled sources +//! have no effect on the processor. +//! +//! The \e ulIntFlags parameter is the logical OR of any of the following: +//! +//! - \b ETH_INT_PHY - An interrupt from the PHY has occurred. The integrated +//! PHY supports a number of interrupt conditions. The PHY register, PHY_MR17, +//! must be read to determine which PHY interrupt has occurred. This register +//! can be read using the EthernetPHYRead() API function. +//! - \b ETH_INT_MDIO - This interrupt indicates that a transaction on the +//! management interface has completed successfully. +//! - \b ETH_INT_RXER - This interrupt indicates that an error has occurred +//! during reception of a frame. This error can indicate a length mismatch, a +//! CRC failure, or an error indication from the PHY. +//! - \b ETH_INT_RXOF - This interrupt indicates that a frame has been received +//! that exceeds the available space in the RX FIFO. +//! - \b ETH_INT_TX - This interrupt indicates that the packet stored in the TX +//! FIFO has been successfully transmitted. +//! - \b ETH_INT_TXER - This interrupt indicates that an error has occurred +//! during the transmission of a packet. This error can be either a retry +//! failure during the back-off process, or an invalid length stored in the TX +//! FIFO. +//! - \b ETH_INT_RX - This interrupt indicates that one (or more) packets are +//! available in the RX FIFO for processing. +//! +//! \return None. +// +//***************************************************************************** +void +EthernetIntEnable(unsigned long ulBase, unsigned long ulIntFlags) +{ + // + // Check the arguments. + // + ASSERT(ulBase == ETH_BASE); + ASSERT(!(ulIntFlags & ~(ETH_INT_PHY | ETH_INT_MDIO | ETH_INT_RXER | + ETH_INT_RXOF | ETH_INT_TX | ETH_INT_TXER | + ETH_INT_RX))); + + // + // Enable the specified interrupts. + // + HWREG(ulBase + MAC_O_IM) |= ulIntFlags; +} + +//***************************************************************************** +// +//! Disables individual Ethernet interrupt sources. +//! +//! \param ulBase is the base address of the controller. +//! \param ulIntFlags is the bit mask of the interrupt sources to be disabled. +//! +//! Disables the indicated Ethernet interrupt sources. Only the sources that +//! are enabled can be reflected to the processor interrupt; disabled sources +//! have no effect on the processor. +//! +//! The \e ulIntFlags parameter has the same definition as the \e ulIntFlags +//! parameter to EthernetIntEnable(). +//! +//! \return None. +// +//***************************************************************************** +void +EthernetIntDisable(unsigned long ulBase, unsigned long ulIntFlags) +{ + // + // Check the arguments. + // + ASSERT(ulBase == ETH_BASE); + ASSERT(!(ulIntFlags & ~(ETH_INT_PHY | ETH_INT_MDIO | ETH_INT_RXER | + ETH_INT_RXOF | ETH_INT_TX | ETH_INT_TXER | + ETH_INT_RX))); + + // + // Disable the specified interrupts. + // + HWREG(ulBase + MAC_O_IM) &= ~ulIntFlags; +} + +//***************************************************************************** +// +//! Gets the current Ethernet interrupt status. +//! +//! \param ulBase is the base address of the controller. +//! \param bMasked is false if the raw interrupt status is required and true +//! if the masked interrupt status is required. +//! +//! This returns the interrupt status for the Ethernet controller. Either the +//! raw interrupt status or the status of interrupts that are allowed to +//! reflect to the processor can be returned. +//! +//! \return Returns the current interrupt status, enumerated as a bit field of +//! values described in EthernetIntEnable(). +// +//***************************************************************************** +unsigned long +EthernetIntStatus(unsigned long ulBase, tBoolean bMasked) +{ + unsigned long ulStatus; + + // + // Check the arguments. + // + ASSERT(ulBase == ETH_BASE); + + // + // Read the unmasked status. + // + ulStatus = HWREG(ulBase + MAC_O_RIS); + + // + // If masked status is requested, mask it off. + // + if(bMasked) + { + ulStatus &= HWREG(ulBase + MAC_O_IM); + } + + // + // Return the interrupt status value. + // + return(ulStatus); +} + +//***************************************************************************** +// +//! Clears Ethernet interrupt sources. +//! +//! \param ulBase is the base address of the controller. +//! \param ulIntFlags is a bit mask of the interrupt sources to be cleared. +//! +//! The specified Ethernet interrupt sources are cleared so that they no longer +//! assert. This must be done in the interrupt handler to keep it from being +//! called again immediately upon exit. +//! +//! The \e ulIntFlags parameter has the same definition as the \e ulIntFlags +//! parameter to EthernetIntEnable(). +//! +//! \note Since there is a write buffer in the Cortex-M3 processor, it may take +//! several clock cycles before the interrupt source is actually cleared. +//! Therefore, it is recommended that the interrupt source be cleared early in +//! the interrupt handler (as opposed to the very last action) to avoid +//! returning from the interrupt handler before the interrupt source is +//! actually cleared. Failure to do so may result in the interrupt handler +//! being immediately reentered (since NVIC still sees the interrupt source +//! asserted). +//! +//! \return None. +// +//***************************************************************************** +void +EthernetIntClear(unsigned long ulBase, unsigned long ulIntFlags) +{ + // + // Check the arguments. + // + ASSERT(ulBase == ETH_BASE); + ASSERT(!(ulIntFlags & ~(ETH_INT_PHY | ETH_INT_MDIO | ETH_INT_RXER | + ETH_INT_RXOF | ETH_INT_TX | ETH_INT_TXER | + ETH_INT_RX))); + + // + // Clear the requested interrupt sources. + // + HWREG(ulBase + MAC_O_IACK) = ulIntFlags; +} + +//***************************************************************************** +// +//! Writes to the PHY register. +//! +//! \param ulBase is the base address of the controller. +//! \param ucRegAddr is the address of the PHY register to be accessed. +//! \param ulData is the data to be written to the PHY register. +//! +//! This function will write the \e ulData to the PHY register specified by +//! \e ucRegAddr. +//! +//! \return None. +// +//***************************************************************************** +void +EthernetPHYWrite(unsigned long ulBase, unsigned char ucRegAddr, + unsigned long ulData) +{ + // + // Check the arguments. + // + ASSERT(ulBase == ETH_BASE); + + // + // Wait for any pending transaction to complete. + // + while(HWREG(ulBase + MAC_O_MCTL) & MAC_MCTL_START) + { + } + + // + // Program the DATA to be written. + // + HWREG(ulBase + MAC_O_MTXD) = ulData & MAC_MTXD_MDTX_M; + + // + // Program the PHY register address and initiate the transaction. + // + HWREG(ulBase + MAC_O_MCTL) = (((ucRegAddr << 3) & MAC_MCTL_REGADR_M) | + MAC_MCTL_WRITE | MAC_MCTL_START); + + // + // Wait for the write transaction to complete. + // + while(HWREG(ulBase + MAC_O_MCTL) & MAC_MCTL_START) + { + } +} + +//***************************************************************************** +// +//! Reads from a PHY register. +//! +//! \param ulBase is the base address of the controller. +//! \param ucRegAddr is the address of the PHY register to be accessed. +//! +//! This function will return the contents of the PHY register specified by +//! \e ucRegAddr. +//! +//! \return Returns the 16-bit value read from the PHY. +// +//***************************************************************************** +unsigned long +EthernetPHYRead(unsigned long ulBase, unsigned char ucRegAddr) +{ + // + // Check the arguments. + // + ASSERT(ulBase == ETH_BASE); + + // + // Wait for any pending transaction to complete. + // + while(HWREG(ulBase + MAC_O_MCTL) & MAC_MCTL_START) + { + } + + // + // Program the PHY register address and initiate the transaction. + // + HWREG(ulBase + MAC_O_MCTL) = (((ucRegAddr << 3) & MAC_MCTL_REGADR_M) | + MAC_MCTL_START); + + // + // Wait for the transaction to complete. + // + while(HWREG(ulBase + MAC_O_MCTL) & MAC_MCTL_START) + { + } + + // + // Return the PHY data that was read. + // + return(HWREG(ulBase + MAC_O_MRXD) & MAC_MRXD_MDRX_M); +} + +//***************************************************************************** +// +// Close the Doxygen group. +//! @} +// +//***************************************************************************** diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/ethernet.h b/bsp/lm3s_9b9x/Libraries/driverlib/ethernet.h new file mode 100644 index 0000000000000000000000000000000000000000..2f03b39291efb32a246998d9ce1e7d46ac22c275 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/ethernet.h @@ -0,0 +1,169 @@ +//***************************************************************************** +// +// ethernet.h - Defines and Macros for the ethernet module. +// +// Copyright (c) 2006-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +#ifndef __ETHERNET_H__ +#define __ETHERNET_H__ + +//***************************************************************************** +// +// If building with a C++ compiler, make all of the definitions in this header +// have a C binding. +// +//***************************************************************************** +#ifdef __cplusplus +extern "C" +{ +#endif + +//***************************************************************************** +// +// Values that can be passed to EthernetConfigSet as the ulConfig value, and +// returned from EthernetConfigGet. +// +//***************************************************************************** +#define ETH_CFG_TS_TSEN 0x010000 // Enable Timestamp (CCP) +#define ETH_CFG_RX_BADCRCDIS 0x000800 // Disable RX BAD CRC Packets +#define ETH_CFG_RX_PRMSEN 0x000400 // Enable RX Promiscuous +#define ETH_CFG_RX_AMULEN 0x000200 // Enable RX Multicast +#define ETH_CFG_TX_DPLXEN 0x000010 // Enable TX Duplex Mode +#define ETH_CFG_TX_CRCEN 0x000004 // Enable TX CRC Generation +#define ETH_CFG_TX_PADEN 0x000002 // Enable TX Padding + +//***************************************************************************** +// +// Values that can be passed to EthernetIntEnable, EthernetIntDisable, and +// EthernetIntClear as the ulIntFlags parameter, and returned from +// EthernetIntStatus. +// +//***************************************************************************** +#define ETH_INT_PHY 0x040 // PHY Event/Interrupt +#define ETH_INT_MDIO 0x020 // Management Transaction +#define ETH_INT_RXER 0x010 // RX Error +#define ETH_INT_RXOF 0x008 // RX FIFO Overrun +#define ETH_INT_TX 0x004 // TX Complete +#define ETH_INT_TXER 0x002 // TX Error +#define ETH_INT_RX 0x001 // RX Complete + +//***************************************************************************** +// +// Helper Macros for Ethernet Processing +// +//***************************************************************************** +// +// htonl/ntohl - big endian/little endian byte swapping macros for +// 32-bit (long) values +// +//***************************************************************************** +#ifndef htonl + #define htonl(a) \ + ((((a) >> 24) & 0x000000ff) | \ + (((a) >> 8) & 0x0000ff00) | \ + (((a) << 8) & 0x00ff0000) | \ + (((a) << 24) & 0xff000000)) +#endif + +#ifndef ntohl + #define ntohl(a) htonl((a)) +#endif + +//***************************************************************************** +// +// htons/ntohs - big endian/little endian byte swapping macros for +// 16-bit (short) values +// +//***************************************************************************** +#ifndef htons + #define htons(a) \ + ((((a) >> 8) & 0x00ff) | \ + (((a) << 8) & 0xff00)) +#endif + +#ifndef ntohs + #define ntohs(a) htons((a)) +#endif + +//***************************************************************************** +// +// API Function prototypes +// +//***************************************************************************** +extern void EthernetInitExpClk(unsigned long ulBase, unsigned long ulEthClk); +extern void EthernetConfigSet(unsigned long ulBase, unsigned long ulConfig); +extern unsigned long EthernetConfigGet(unsigned long ulBase); +extern void EthernetMACAddrSet(unsigned long ulBase, + unsigned char *pucMACAddr); +extern void EthernetMACAddrGet(unsigned long ulBase, + unsigned char *pucMACAddr); +extern void EthernetEnable(unsigned long ulBase); +extern void EthernetDisable(unsigned long ulBase); +extern tBoolean EthernetPacketAvail(unsigned long ulBase); +extern tBoolean EthernetSpaceAvail(unsigned long ulBase); +extern long EthernetPacketGetNonBlocking(unsigned long ulBase, + unsigned char *pucBuf, + long lBufLen); +extern long EthernetPacketGet(unsigned long ulBase, unsigned char *pucBuf, + long lBufLen); +extern long EthernetPacketPutNonBlocking(unsigned long ulBase, + unsigned char *pucBuf, + long lBufLen); +extern long EthernetPacketPut(unsigned long ulBase, unsigned char *pucBuf, + long lBufLen); +extern void EthernetIntRegister(unsigned long ulBase, + void (*pfnHandler)(void)); +extern void EthernetIntUnregister(unsigned long ulBase); +extern void EthernetIntEnable(unsigned long ulBase, unsigned long ulIntFlags); +extern void EthernetIntDisable(unsigned long ulBase, unsigned long ulIntFlags); +extern unsigned long EthernetIntStatus(unsigned long ulBase, tBoolean bMasked); +extern void EthernetIntClear(unsigned long ulBase, unsigned long ulIntFlags); +extern void EthernetPHYWrite(unsigned long ulBase, unsigned char ucRegAddr, + unsigned long ulData); +extern unsigned long EthernetPHYRead(unsigned long ulBase, + unsigned char ucRegAddr); + +//***************************************************************************** +// +// Several Ethernet APIs have been renamed, with the original function name +// being deprecated. These defines provide backward compatibility. +// +//***************************************************************************** +#ifndef DEPRECATED +#include "driverlib/sysctl.h" +#define EthernetInit(a) \ + EthernetInitExpClk(a, SysCtlClockGet()) +#define EthernetPacketNonBlockingGet(a, b, c) \ + EthernetPacketGetNonBlocking(a, b, c) +#define EthernetPacketNonBlockingPut(a, b, c) \ + EthernetPacketPutNonBlocking(a, b, c) +#endif + +//***************************************************************************** +// +// Mark the end of the C bindings section for C++ compilers. +// +//***************************************************************************** +#ifdef __cplusplus +} +#endif + +#endif // __ETHERNET_H__ diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/flash.c b/bsp/lm3s_9b9x/Libraries/driverlib/flash.c new file mode 100644 index 0000000000000000000000000000000000000000..1b2e396575457d20559778c56f692abe8b839636 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/flash.c @@ -0,0 +1,912 @@ +//***************************************************************************** +// +// flash.c - Driver for programming the on-chip flash. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +//***************************************************************************** +// +//! \addtogroup flash_api +//! @{ +// +//***************************************************************************** + +#include "inc/hw_flash.h" +#include "inc/hw_ints.h" +#include "inc/hw_sysctl.h" +#include "inc/hw_types.h" +#include "driverlib/debug.h" +#include "driverlib/flash.h" +#include "driverlib/interrupt.h" + +//***************************************************************************** +// +// An array that maps the specified memory bank to the appropriate Flash +// Memory Protection Program Enable (FMPPE) register. +// +//***************************************************************************** +static const unsigned long g_pulFMPPERegs[] = +{ + FLASH_FMPPE, + FLASH_FMPPE1, + FLASH_FMPPE2, + FLASH_FMPPE3 +}; + +//***************************************************************************** +// +// An array that maps the specified memory bank to the appropriate Flash +// Memory Protection Read Enable (FMPRE) register. +// +//***************************************************************************** +static const unsigned long g_pulFMPRERegs[] = +{ + FLASH_FMPRE, + FLASH_FMPRE1, + FLASH_FMPRE2, + FLASH_FMPRE3 +}; + +//***************************************************************************** +// +//! Gets the number of processor clocks per micro-second. +//! +//! This function returns the number of clocks per micro-second, as presently +//! known by the flash controller. +//! +//! \return Returns the number of processor clocks per micro-second. +// +//***************************************************************************** +unsigned long +FlashUsecGet(void) +{ + // + // Return the number of clocks per micro-second. + // + return(HWREG(FLASH_USECRL) + 1); +} + +//***************************************************************************** +// +//! Sets the number of processor clocks per micro-second. +//! +//! \param ulClocks is the number of processor clocks per micro-second. +//! +//! This function is used to tell the flash controller the number of processor +//! clocks per micro-second. This value must be programmed correctly or the +//! flash most likely will not program correctly; it has no affect on reading +//! flash. +//! +//! \return None. +// +//***************************************************************************** +void +FlashUsecSet(unsigned long ulClocks) +{ + // + // Set the number of clocks per micro-second. + // + HWREG(FLASH_USECRL) = ulClocks - 1; +} + +//***************************************************************************** +// +//! Erases a block of flash. +//! +//! \param ulAddress is the start address of the flash block to be erased. +//! +//! This function will erase a 1 kB block of the on-chip flash. After erasing, +//! the block will be filled with 0xFF bytes. Read-only and execute-only +//! blocks cannot be erased. +//! +//! This function will not return until the block has been erased. +//! +//! \return Returns 0 on success, or -1 if an invalid block address was +//! specified or the block is write-protected. +// +//***************************************************************************** +long +FlashErase(unsigned long ulAddress) +{ + // + // Check the arguments. + // + ASSERT(!(ulAddress & (FLASH_ERASE_SIZE - 1))); + + // + // Clear the flash access interrupt. + // + HWREG(FLASH_FCMISC) = FLASH_FCMISC_AMISC; + + // + // Erase the block. + // + HWREG(FLASH_FMA) = ulAddress; + HWREG(FLASH_FMC) = FLASH_FMC_WRKEY | FLASH_FMC_ERASE; + + // + // Wait until the block has been erased. + // + while(HWREG(FLASH_FMC) & FLASH_FMC_ERASE) + { + } + + // + // Return an error if an access violation occurred. + // + if(HWREG(FLASH_FCRIS) & FLASH_FCRIS_ARIS) + { + return(-1); + } + + // + // Success. + // + return(0); +} + +//***************************************************************************** +// +//! Programs flash. +//! +//! \param pulData is a pointer to the data to be programmed. +//! \param ulAddress is the starting address in flash to be programmed. Must +//! be a multiple of four. +//! \param ulCount is the number of bytes to be programmed. Must be a multiple +//! of four. +//! +//! This function will program a sequence of words into the on-chip flash. +//! Programming each location consists of the result of an AND operation +//! of the new data and the existing data; in other words bits that contain +//! 1 can remain 1 or be changed to 0, but bits that are 0 cannot be changed +//! to 1. Therefore, a word can be programmed multiple times as long as these +//! rules are followed; if a program operation attempts to change a 0 bit to +//! a 1 bit, that bit will not have its value changed. +//! +//! Since the flash is programmed one word at a time, the starting address and +//! byte count must both be multiples of four. It is up to the caller to +//! verify the programmed contents, if such verification is required. +//! +//! This function will not return until the data has been programmed. +//! +//! \return Returns 0 on success, or -1 if a programming error is encountered. +// +//***************************************************************************** +long +FlashProgram(unsigned long *pulData, unsigned long ulAddress, + unsigned long ulCount) +{ + // + // Check the arguments. + // + ASSERT(!(ulAddress & 3)); + ASSERT(!(ulCount & 3)); + + // + // Clear the flash access interrupt. + // + HWREG(FLASH_FCMISC) = FLASH_FCMISC_AMISC; + + // + // See if this device has a write buffer. + // + if(HWREG(SYSCTL_NVMSTAT) & SYSCTL_NVMSTAT_FWB) + { + // + // Loop over the words to be programmed. + // + while(ulCount) + { + // + // Set the address of this block of words. + // + HWREG(FLASH_FMA) = ulAddress & ~(0x7f); + + // + // Loop over the words in this 32-word block. + // + while(((ulAddress & 0x7c) || (HWREG(FLASH_FWBVAL) == 0)) && + (ulCount != 0)) + { + // + // Write this word into the write buffer. + // + HWREG(FLASH_FWBN + (ulAddress & 0x7c)) = *pulData++; + ulAddress += 4; + ulCount -= 4; + } + + // + // Program the contents of the write buffer into flash. + // + HWREG(FLASH_FMC2) = FLASH_FMC2_WRKEY | FLASH_FMC2_WRBUF; + + // + // Wait until the write buffer has been programmed. + // + while(HWREG(FLASH_FMC2) & FLASH_FMC2_WRBUF) + { + } + } + } + else + { + // + // Loop over the words to be programmed. + // + while(ulCount) + { + // + // Program the next word. + // + HWREG(FLASH_FMA) = ulAddress; + HWREG(FLASH_FMD) = *pulData; + HWREG(FLASH_FMC) = FLASH_FMC_WRKEY | FLASH_FMC_WRITE; + + // + // Wait until the word has been programmed. + // + while(HWREG(FLASH_FMC) & FLASH_FMC_WRITE) + { + } + + // + // Increment to the next word. + // + pulData++; + ulAddress += 4; + ulCount -= 4; + } + } + + // + // Return an error if an access violation occurred. + // + if(HWREG(FLASH_FCRIS) & FLASH_FCRIS_ARIS) + { + return(-1); + } + + // + // Success. + // + return(0); +} + +//***************************************************************************** +// +//! Gets the protection setting for a block of flash. +//! +//! \param ulAddress is the start address of the flash block to be queried. +//! +//! This function will get the current protection for the specified 2 kB block +//! of flash. Each block can be read/write, read-only, or execute-only. +//! Read/write blocks can be read, executed, erased, and programmed. Read-only +//! blocks can be read and executed. Execute-only blocks can only be executed; +//! processor and debugger data reads are not allowed. +//! +//! \return Returns the protection setting for this block. See +//! FlashProtectSet() for possible values. +// +//***************************************************************************** +tFlashProtection +FlashProtectGet(unsigned long ulAddress) +{ + unsigned long ulFMPRE, ulFMPPE; + unsigned long ulBank; + + // + // Check the argument. + // + ASSERT(!(ulAddress & (FLASH_PROTECT_SIZE - 1))); + + // + // Calculate the Flash Bank from Base Address, and mask off the Bank + // from ulAddress for subsequent reference. + // + ulBank = (((ulAddress / FLASH_PROTECT_SIZE) / 32) % 4); + ulAddress &= ((FLASH_PROTECT_SIZE * 32) - 1); + + // + // Read the appropriate flash protection registers for the specified + // flash bank. + // + ulFMPRE = HWREG(g_pulFMPRERegs[ulBank]); + ulFMPPE = HWREG(g_pulFMPPERegs[ulBank]); + + // + // For Stellaris Sandstorm-class devices, revision C1 and C2, the upper + // bits of the FMPPE register are used for JTAG protect options, and are + // not available for the FLASH protection scheme. When Querying Block + // Protection, assume these bits are 1. + // + if(CLASS_IS_SANDSTORM && (REVISION_IS_C1 || REVISION_IS_C2)) + { + ulFMPRE |= (FLASH_FMP_BLOCK_31 | FLASH_FMP_BLOCK_30); + } + + // + // Check the appropriate protection bits for the block of memory that + // is specified by the address. + // + switch((((ulFMPRE >> (ulAddress / FLASH_PROTECT_SIZE)) & + FLASH_FMP_BLOCK_0) << 1) | + ((ulFMPPE >> (ulAddress / FLASH_PROTECT_SIZE)) & FLASH_FMP_BLOCK_0)) + { + // + // This block is marked as execute only (that is, it can not be erased + // or programmed, and the only reads allowed are via the instruction + // fetch interface). + // + case 0: + case 1: + { + return(FlashExecuteOnly); + } + + // + // This block is marked as read only (that is, it can not be erased or + // programmed). + // + case 2: + { + return(FlashReadOnly); + } + + // + // This block is read/write; it can be read, erased, and programmed. + // + case 3: + default: + { + return(FlashReadWrite); + } + } +} + +//***************************************************************************** +// +//! Sets the protection setting for a block of flash. +//! +//! \param ulAddress is the start address of the flash block to be protected. +//! \param eProtect is the protection to be applied to the block. Can be one +//! of \b FlashReadWrite, \b FlashReadOnly, or \b FlashExecuteOnly. +//! +//! This function will set the protection for the specified 2 kB block of +//! flash. Blocks which are read/write can be made read-only or execute-only. +//! Blocks which are read-only can be made execute-only. Blocks which are +//! execute-only cannot have their protection modified. Attempts to make the +//! block protection less stringent (that is, read-only to read/write) will +//! result in a failure (and be prevented by the hardware). +//! +//! Changes to the flash protection are maintained only until the next reset. +//! This allows the application to be executed in the desired flash protection +//! environment to check for inappropriate flash access (via the flash +//! interrupt). To make the flash protection permanent, use the +//! FlashProtectSave() function. +//! +//! \return Returns 0 on success, or -1 if an invalid address or an invalid +//! protection was specified. +// +//***************************************************************************** +long +FlashProtectSet(unsigned long ulAddress, tFlashProtection eProtect) +{ + unsigned long ulProtectRE, ulProtectPE; + unsigned long ulBank; + + // + // Check the argument. + // + ASSERT(!(ulAddress & (FLASH_PROTECT_SIZE - 1))); + ASSERT((eProtect == FlashReadWrite) || (eProtect == FlashReadOnly) || + (eProtect == FlashExecuteOnly)); + + // + // Convert the address into a block number. + // + ulAddress /= FLASH_PROTECT_SIZE; + + // + // ulAddress contains a "raw" block number. Derive the Flash Bank from + // the "raw" block number, and convert ulAddress to a "relative" + // block number. + // + ulBank = ((ulAddress / 32) % 4); + ulAddress %= 32; + + // + // Get the current protection for the specified flash bank. + // + ulProtectRE = HWREG(g_pulFMPRERegs[ulBank]); + ulProtectPE = HWREG(g_pulFMPPERegs[ulBank]); + + // + // For Stellaris Sandstorm-class devices, revision C1 and C2, the upper + // bits of the FMPPE register are used for JTAG protect options, and are + // not available for the FLASH protection scheme. When setting protection, + // check to see if block 30 or 31 and protection is FlashExecuteOnly. If + // so, return an error condition. + // + if(CLASS_IS_SANDSTORM && (REVISION_IS_C1 || REVISION_IS_C2)) + { + if((ulAddress >= 30) && (eProtect == FlashExecuteOnly)) + { + return(-1); + } + } + + // + // Set the protection based on the requested proection. + // + switch(eProtect) + { + // + // Make this block execute only. + // + case FlashExecuteOnly: + { + // + // Turn off the read and program bits for this block. + // + ulProtectRE &= ~(FLASH_FMP_BLOCK_0 << ulAddress); + ulProtectPE &= ~(FLASH_FMP_BLOCK_0 << ulAddress); + + // + // We're done handling this protection. + // + break; + } + + // + // Make this block read only. + // + case FlashReadOnly: + { + // + // The block can not be made read only if it is execute only. + // + if(((ulProtectRE >> ulAddress) & FLASH_FMP_BLOCK_0) != + FLASH_FMP_BLOCK_0) + { + return(-1); + } + + // + // Make this block read only. + // + ulProtectPE &= ~(FLASH_FMP_BLOCK_0 << ulAddress); + + // + // We're done handling this protection. + // + break; + } + + // + // Make this block read/write. + // + case FlashReadWrite: + default: + { + // + // The block can not be made read/write if it is not already + // read/write. + // + if((((ulProtectRE >> ulAddress) & FLASH_FMP_BLOCK_0) != + FLASH_FMP_BLOCK_0) || + (((ulProtectPE >> ulAddress) & FLASH_FMP_BLOCK_0) != + FLASH_FMP_BLOCK_0)) + { + return(-1); + } + + // + // The block is already read/write, so there is nothing to do. + // + return(0); + } + } + + // + // For Stellaris Sandstorm-class devices, revision C1 and C2, the upper + // bits of the FMPPE register are used for JTAG options, and are not + // available for the FLASH protection scheme. When setting block + // protection, ensure that these bits are not altered. + // + if(CLASS_IS_SANDSTORM && (REVISION_IS_C1 || REVISION_IS_C2)) + { + ulProtectRE &= ~(FLASH_FMP_BLOCK_31 | FLASH_FMP_BLOCK_30); + ulProtectRE |= (HWREG(g_pulFMPRERegs[ulBank]) & + (FLASH_FMP_BLOCK_31 | FLASH_FMP_BLOCK_30)); + } + + // + // Set the new protection for the specified flash bank. + // + HWREG(g_pulFMPRERegs[ulBank]) = ulProtectRE; + HWREG(g_pulFMPPERegs[ulBank]) = ulProtectPE; + + // + // Success. + // + return(0); +} + +//***************************************************************************** +// +//! Saves the flash protection settings. +//! +//! This function will make the currently programmed flash protection settings +//! permanent. This is a non-reversible operation; a chip reset or power cycle +//! will not change the flash protection. +//! +//! This function will not return until the protection has been saved. +//! +//! \return Returns 0 on success, or -1 if a hardware error is encountered. +// +//***************************************************************************** +long +FlashProtectSave(void) +{ + int ulTemp, ulLimit; + + // + // If running on a Sandstorm-class device, only trigger a save of the first + // two protection registers (FMPRE and FMPPE). Otherwise, save the + // entire bank of flash protection registers. + // + ulLimit = CLASS_IS_SANDSTORM ? 2 : 8; + for(ulTemp = 0; ulTemp < ulLimit; ulTemp++) + { + // + // Tell the flash controller to write the flash protection register. + // + HWREG(FLASH_FMA) = ulTemp; + HWREG(FLASH_FMC) = FLASH_FMC_WRKEY | FLASH_FMC_COMT; + + // + // Wait until the write has completed. + // + while(HWREG(FLASH_FMC) & FLASH_FMC_COMT) + { + } + } + + // + // Success. + // + return(0); +} + +//***************************************************************************** +// +//! Gets the user registers. +//! +//! \param pulUser0 is a pointer to the location to store USER Register 0. +//! \param pulUser1 is a pointer to the location to store USER Register 1. +//! +//! This function will read the contents of user registers (0 and 1), and +//! store them in the specified locations. +//! +//! \return Returns 0 on success, or -1 if a hardware error is encountered. +// +//***************************************************************************** +long +FlashUserGet(unsigned long *pulUser0, unsigned long *pulUser1) +{ + // + // Verify that the pointers are valid. + // + ASSERT(pulUser0 != 0); + ASSERT(pulUser1 != 0); + + // + // Verify that hardware supports user registers. + // + if(CLASS_IS_SANDSTORM) + { + return(-1); + } + + // + // Get and store the current value of the user registers. + // + *pulUser0 = HWREG(FLASH_USERREG0); + *pulUser1 = HWREG(FLASH_USERREG1); + + // + // Success. + // + return(0); +} + +//***************************************************************************** +// +//! Sets the user registers. +//! +//! \param ulUser0 is the value to store in USER Register 0. +//! \param ulUser1 is the value to store in USER Register 1. +//! +//! This function will set the contents of the user registers (0 and 1) to +//! the specified values. +//! +//! \return Returns 0 on success, or -1 if a hardware error is encountered. +// +//***************************************************************************** +long +FlashUserSet(unsigned long ulUser0, unsigned long ulUser1) +{ + // + // Verify that hardware supports user registers. + // + if(CLASS_IS_SANDSTORM) + { + return(-1); + } + + // + // Save the new values into the user registers. + // + HWREG(FLASH_USERREG0) = ulUser0; + HWREG(FLASH_USERREG1) = ulUser1; + + // + // Success. + // + return(0); +} + +//***************************************************************************** +// +//! Saves the user registers. +//! +//! This function will make the currently programmed user register settings +//! permanent. This is a non-reversible operation; a chip reset or power cycle +//! will not change this setting. +//! +//! This function will not return until the protection has been saved. +//! +//! \return Returns 0 on success, or -1 if a hardware error is encountered. +// +//***************************************************************************** +long +FlashUserSave(void) +{ + // + // Verify that hardware supports user registers. + // + if(CLASS_IS_SANDSTORM) + { + return(-1); + } + + // + // Setting the MSB of FMA will trigger a permanent save of a USER + // register. Bit 0 will indicate User 0 (0) or User 1 (1). + // + HWREG(FLASH_FMA) = 0x80000000; + HWREG(FLASH_FMC) = FLASH_FMC_WRKEY | FLASH_FMC_COMT; + + // + // Wait until the write has completed. + // + while(HWREG(FLASH_FMC) & FLASH_FMC_COMT) + { + } + + // + // Tell the flash controller to write the USER1 Register. + // + HWREG(FLASH_FMA) = 0x80000001; + HWREG(FLASH_FMC) = FLASH_FMC_WRKEY | FLASH_FMC_COMT; + + // + // Wait until the write has completed. + // + while(HWREG(FLASH_FMC) & FLASH_FMC_COMT) + { + } + + // + // Success. + // + return(0); +} + +//***************************************************************************** +// +//! Registers an interrupt handler for the flash interrupt. +//! +//! \param pfnHandler is a pointer to the function to be called when the flash +//! interrupt occurs. +//! +//! This sets the handler to be called when the flash interrupt occurs. The +//! flash controller can generate an interrupt when an invalid flash access +//! occurs, such as trying to program or erase a read-only block, or trying to +//! read from an execute-only block. It can also generate an interrupt when a +//! program or erase operation has completed. The interrupt will be +//! automatically enabled when the handler is registered. +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +FlashIntRegister(void (*pfnHandler)(void)) +{ + // + // Register the interrupt handler, returning an error if an error occurs. + // + IntRegister(INT_FLASH, pfnHandler); + + // + // Enable the flash interrupt. + // + IntEnable(INT_FLASH); +} + +//***************************************************************************** +// +//! Unregisters the interrupt handler for the flash interrupt. +//! +//! This function will clear the handler to be called when the flash interrupt +//! occurs. This will also mask off the interrupt in the interrupt controller +//! so that the interrupt handler is no longer called. +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +FlashIntUnregister(void) +{ + // + // Disable the interrupt. + // + IntDisable(INT_FLASH); + + // + // Unregister the interrupt handler. + // + IntUnregister(INT_FLASH); +} + +//***************************************************************************** +// +//! Enables individual flash controller interrupt sources. +//! +//! \param ulIntFlags is a bit mask of the interrupt sources to be enabled. +//! Can be any of the \b FLASH_INT_PROGRAM or \b FLASH_INT_ACCESS values. +//! +//! Enables the indicated flash controller interrupt sources. Only the sources +//! that are enabled can be reflected to the processor interrupt; disabled +//! sources have no effect on the processor. +//! +//! \return None. +// +//***************************************************************************** +void +FlashIntEnable(unsigned long ulIntFlags) +{ + // + // Enable the specified interrupts. + // + HWREG(FLASH_FCIM) |= ulIntFlags; +} + +//***************************************************************************** +// +//! Disables individual flash controller interrupt sources. +//! +//! \param ulIntFlags is a bit mask of the interrupt sources to be disabled. +//! Can be any of the \b FLASH_INT_PROGRAM or \b FLASH_INT_ACCESS values. +//! +//! Disables the indicated flash controller interrupt sources. Only the +//! sources that are enabled can be reflected to the processor interrupt; +//! disabled sources have no effect on the processor. +//! +//! \return None. +// +//***************************************************************************** +void +FlashIntDisable(unsigned long ulIntFlags) +{ + // + // Disable the specified interrupts. + // + HWREG(FLASH_FCIM) &= ~(ulIntFlags); +} + +//***************************************************************************** +// +//! Gets the current interrupt status. +//! +//! \param bMasked is false if the raw interrupt status is required and true if +//! the masked interrupt status is required. +//! +//! This returns the interrupt status for the flash controller. Either the raw +//! interrupt status or the status of interrupts that are allowed to reflect to +//! the processor can be returned. +//! +//! \return The current interrupt status, enumerated as a bit field of +//! \b FLASH_INT_PROGRAM and \b FLASH_INT_ACCESS. +// +//***************************************************************************** +unsigned long +FlashIntStatus(tBoolean bMasked) +{ + // + // Return either the interrupt status or the raw interrupt status as + // requested. + // + if(bMasked) + { + return(HWREG(FLASH_FCMISC)); + } + else + { + return(HWREG(FLASH_FCRIS)); + } +} + +//***************************************************************************** +// +//! Clears flash controller interrupt sources. +//! +//! \param ulIntFlags is the bit mask of the interrupt sources to be cleared. +//! Can be any of the \b FLASH_INT_PROGRAM or \b FLASH_INT_AMISC values. +//! +//! The specified flash controller interrupt sources are cleared, so that they +//! no longer assert. This must be done in the interrupt handler to keep it +//! from being called again immediately upon exit. +//! +//! \note Since there is a write buffer in the Cortex-M3 processor, it may take +//! several clock cycles before the interrupt source is actually cleared. +//! Therefore, it is recommended that the interrupt source be cleared early in +//! the interrupt handler (as opposed to the very last action) to avoid +//! returning from the interrupt handler before the interrupt source is +//! actually cleared. Failure to do so may result in the interrupt handler +//! being immediately reentered (since NVIC still sees the interrupt source +//! asserted). +//! +//! \return None. +// +//***************************************************************************** +void +FlashIntClear(unsigned long ulIntFlags) +{ + // + // Clear the flash interrupt. + // + HWREG(FLASH_FCMISC) = ulIntFlags; +} + +//***************************************************************************** +// +// Close the Doxygen group. +//! @} +// +//***************************************************************************** diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/flash.h b/bsp/lm3s_9b9x/Libraries/driverlib/flash.h new file mode 100644 index 0000000000000000000000000000000000000000..ad84a6c8502e051fb90c0900a60bdbf75492808f --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/flash.h @@ -0,0 +1,106 @@ +//***************************************************************************** +// +// flash.h - Prototypes for the flash driver. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +#ifndef __FLASH_H__ +#define __FLASH_H__ + +//***************************************************************************** +// +// If building with a C++ compiler, make all of the definitions in this header +// have a C binding. +// +//***************************************************************************** +#ifdef __cplusplus +extern "C" +{ +#endif + +//***************************************************************************** +// +// Values that can be passed to FlashProtectSet(), and returned by +// FlashProtectGet(). +// +//***************************************************************************** +typedef enum +{ + FlashReadWrite, // Flash can be read and written + FlashReadOnly, // Flash can only be read + FlashExecuteOnly // Flash can only be executed +} +tFlashProtection; + +//***************************************************************************** +// +// Values passed to FlashIntEnable(), FlashIntDisable() and FlashIntClear() and +// returned from FlashIntStatus(). +// +//***************************************************************************** +#define FLASH_INT_PROGRAM 0x00000002 // Programming Interrupt Mask +#define FLASH_INT_ACCESS 0x00000001 // Access Interrupt Mask + +//***************************************************************************** +// +// Prototypes for the APIs. +// +//***************************************************************************** +extern unsigned long FlashUsecGet(void); +extern void FlashUsecSet(unsigned long ulClocks); +extern long FlashErase(unsigned long ulAddress); +extern long FlashProgram(unsigned long *pulData, unsigned long ulAddress, + unsigned long ulCount); +extern tFlashProtection FlashProtectGet(unsigned long ulAddress); +extern long FlashProtectSet(unsigned long ulAddress, + tFlashProtection eProtect); +extern long FlashProtectSave(void); +extern long FlashUserGet(unsigned long *pulUser0, unsigned long *pulUser1); +extern long FlashUserSet(unsigned long ulUser0, unsigned long ulUser1); +extern long FlashUserSave(void); +extern void FlashIntRegister(void (*pfnHandler)(void)); +extern void FlashIntUnregister(void); +extern void FlashIntEnable(unsigned long ulIntFlags); +extern void FlashIntDisable(unsigned long ulIntFlags); +extern unsigned long FlashIntStatus(tBoolean bMasked); +extern void FlashIntClear(unsigned long ulIntFlags); + +//***************************************************************************** +// +// Deprecated function names. These definitions ensure backwards compatibility +// but new code should avoid using deprecated function names since these will +// be removed at some point in the future. +// +//***************************************************************************** +#ifndef DEPRECATED +#define FlashIntGetStatus FlashIntStatus +#endif + +//***************************************************************************** +// +// Mark the end of the C bindings section for C++ compilers. +// +//***************************************************************************** +#ifdef __cplusplus +} +#endif + +#endif // __FLASH_H__ diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/gpio.c b/bsp/lm3s_9b9x/Libraries/driverlib/gpio.c new file mode 100644 index 0000000000000000000000000000000000000000..0e26723f903972bb7cd731a20f5c585dc51c8461 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/gpio.c @@ -0,0 +1,1600 @@ +//***************************************************************************** +// +// gpio.c - API for GPIO ports +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +//***************************************************************************** +// +//! \addtogroup gpio_api +//! @{ +// +//***************************************************************************** + +#include "inc/hw_gpio.h" +#include "inc/hw_ints.h" +#include "inc/hw_memmap.h" +#include "inc/hw_sysctl.h" +#include "inc/hw_types.h" +#include "driverlib/debug.h" +#include "driverlib/gpio.h" +#include "driverlib/interrupt.h" + +//***************************************************************************** +// +// The base addresses of all the GPIO modules. Both the APB and AHB apertures +// are provided. +// +//***************************************************************************** +static const unsigned long g_pulGPIOBaseAddrs[] = +{ + GPIO_PORTA_BASE, GPIO_PORTA_AHB_BASE, + GPIO_PORTB_BASE, GPIO_PORTB_AHB_BASE, + GPIO_PORTC_BASE, GPIO_PORTC_AHB_BASE, + GPIO_PORTD_BASE, GPIO_PORTD_AHB_BASE, + GPIO_PORTE_BASE, GPIO_PORTE_AHB_BASE, + GPIO_PORTF_BASE, GPIO_PORTF_AHB_BASE, + GPIO_PORTG_BASE, GPIO_PORTG_AHB_BASE, + GPIO_PORTH_BASE, GPIO_PORTH_AHB_BASE, + GPIO_PORTJ_BASE, GPIO_PORTJ_AHB_BASE, +}; + +//***************************************************************************** +// +//! \internal +//! Checks a GPIO base address. +//! +//! \param ulPort is the base address of the GPIO port. +//! +//! This function determines if a GPIO port base address is valid. +//! +//! \return Returns \b true if the base address is valid and \b false +//! otherwise. +// +//***************************************************************************** +#ifdef DEBUG +static tBoolean +GPIOBaseValid(unsigned long ulPort) +{ + return((ulPort == GPIO_PORTA_BASE) || (ulPort == GPIO_PORTA_AHB_BASE) || + (ulPort == GPIO_PORTB_BASE) || (ulPort == GPIO_PORTB_AHB_BASE) || + (ulPort == GPIO_PORTC_BASE) || (ulPort == GPIO_PORTC_AHB_BASE) || + (ulPort == GPIO_PORTD_BASE) || (ulPort == GPIO_PORTD_AHB_BASE) || + (ulPort == GPIO_PORTE_BASE) || (ulPort == GPIO_PORTE_AHB_BASE) || + (ulPort == GPIO_PORTF_BASE) || (ulPort == GPIO_PORTF_AHB_BASE) || + (ulPort == GPIO_PORTG_BASE) || (ulPort == GPIO_PORTG_AHB_BASE) || + (ulPort == GPIO_PORTH_BASE) || (ulPort == GPIO_PORTH_AHB_BASE) || + (ulPort == GPIO_PORTJ_BASE) || (ulPort == GPIO_PORTJ_AHB_BASE)); +} +#endif + +//***************************************************************************** +// +//! \internal +//! Gets the GPIO interrupt number. +//! +//! \param ulPort is the base address of the GPIO port. +//! +//! Given a GPIO base address, returns the corresponding interrupt number. +//! +//! \return Returns a GPIO interrupt number, or -1 if \e ulPort is invalid. +// +//***************************************************************************** +static long +GPIOGetIntNumber(unsigned long ulPort) +{ + unsigned int ulInt; + + // + // Determine the GPIO interrupt number for the given module. + // + switch(ulPort) + { + case GPIO_PORTA_BASE: + case GPIO_PORTA_AHB_BASE: + { + ulInt = INT_GPIOA; + break; + } + + case GPIO_PORTB_BASE: + case GPIO_PORTB_AHB_BASE: + { + ulInt = INT_GPIOB; + break; + } + + case GPIO_PORTC_BASE: + case GPIO_PORTC_AHB_BASE: + { + ulInt = INT_GPIOC; + break; + } + + case GPIO_PORTD_BASE: + case GPIO_PORTD_AHB_BASE: + { + ulInt = INT_GPIOD; + break; + } + + case GPIO_PORTE_BASE: + case GPIO_PORTE_AHB_BASE: + { + ulInt = INT_GPIOE; + break; + } + + case GPIO_PORTF_BASE: + case GPIO_PORTF_AHB_BASE: + { + ulInt = INT_GPIOF; + break; + } + + case GPIO_PORTG_BASE: + case GPIO_PORTG_AHB_BASE: + { + ulInt = INT_GPIOG; + break; + } + + case GPIO_PORTH_BASE: + case GPIO_PORTH_AHB_BASE: + { + ulInt = INT_GPIOH; + break; + } + + case GPIO_PORTJ_BASE: + case GPIO_PORTJ_AHB_BASE: + { + ulInt = INT_GPIOJ; + break; + } + + default: + { + return(-1); + } + } + + // + // Return GPIO interrupt number. + // + return(ulInt); +} + +//***************************************************************************** +// +//! Sets the direction and mode of the specified pin(s). +//! +//! \param ulPort is the base address of the GPIO port +//! \param ucPins is the bit-packed representation of the pin(s). +//! \param ulPinIO is the pin direction and/or mode. +//! +//! This function will set the specified pin(s) on the selected GPIO port +//! as either an input or output under software control, or it will set the +//! pin to be under hardware control. +//! +//! The parameter \e ulPinIO is an enumerated data type that can be one of +//! the following values: +//! +//! - \b GPIO_DIR_MODE_IN +//! - \b GPIO_DIR_MODE_OUT +//! - \b GPIO_DIR_MODE_HW +//! +//! where \b GPIO_DIR_MODE_IN specifies that the pin will be programmed as +//! a software controlled input, \b GPIO_DIR_MODE_OUT specifies that the pin +//! will be programmed as a software controlled output, and +//! \b GPIO_DIR_MODE_HW specifies that the pin will be placed under +//! hardware control. +//! +//! The pin(s) are specified using a bit-packed byte, where each bit that is +//! set identifies the pin to be accessed, and where bit 0 of the byte +//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on. +//! +//! \note GPIOPadConfigSet() must also be used to configure the corresponding +//! pad(s) in order for them to propagate the signal to/from the GPIO. +//! +//! \return None. +// +//***************************************************************************** +void +GPIODirModeSet(unsigned long ulPort, unsigned char ucPins, + unsigned long ulPinIO) +{ + // + // Check the arguments. + // + ASSERT(GPIOBaseValid(ulPort)); + ASSERT((ulPinIO == GPIO_DIR_MODE_IN) || (ulPinIO == GPIO_DIR_MODE_OUT) || + (ulPinIO == GPIO_DIR_MODE_HW)); + + // + // Set the pin direction and mode. + // + HWREG(ulPort + GPIO_O_DIR) = ((ulPinIO & 1) ? + (HWREG(ulPort + GPIO_O_DIR) | ucPins) : + (HWREG(ulPort + GPIO_O_DIR) & ~(ucPins))); + HWREG(ulPort + GPIO_O_AFSEL) = ((ulPinIO & 2) ? + (HWREG(ulPort + GPIO_O_AFSEL) | ucPins) : + (HWREG(ulPort + GPIO_O_AFSEL) & + ~(ucPins))); +} + +//***************************************************************************** +// +//! Gets the direction and mode of a pin. +//! +//! \param ulPort is the base address of the GPIO port. +//! \param ucPin is the pin number. +//! +//! This function gets the direction and control mode for a specified pin on +//! the selected GPIO port. The pin can be configured as either an input or +//! output under software control, or it can be under hardware control. The +//! type of control and direction are returned as an enumerated data type. +//! +//! \return Returns one of the enumerated data types described for +//! GPIODirModeSet(). +// +//***************************************************************************** +unsigned long +GPIODirModeGet(unsigned long ulPort, unsigned char ucPin) +{ + unsigned long ulDir, ulAFSEL; + + // + // Check the arguments. + // + ASSERT(GPIOBaseValid(ulPort)); + ASSERT(ucPin < 8); + + // + // Convert from a pin number to a bit position. + // + ucPin = 1 << ucPin; + + // + // Return the pin direction and mode. + // + ulDir = HWREG(ulPort + GPIO_O_DIR); + ulAFSEL = HWREG(ulPort + GPIO_O_AFSEL); + return(((ulDir & ucPin) ? 1 : 0) | ((ulAFSEL & ucPin) ? 2 : 0)); +} + +//***************************************************************************** +// +//! Sets the interrupt type for the specified pin(s). +//! +//! \param ulPort is the base address of the GPIO port. +//! \param ucPins is the bit-packed representation of the pin(s). +//! \param ulIntType specifies the type of interrupt trigger mechanism. +//! +//! This function sets up the various interrupt trigger mechanisms for the +//! specified pin(s) on the selected GPIO port. +//! +//! The parameter \e ulIntType is an enumerated data type that can be one of +//! the following values: +//! +//! - \b GPIO_FALLING_EDGE +//! - \b GPIO_RISING_EDGE +//! - \b GPIO_BOTH_EDGES +//! - \b GPIO_LOW_LEVEL +//! - \b GPIO_HIGH_LEVEL +//! +//! where the different values describe the interrupt detection mechanism +//! (edge or level) and the particular triggering event (falling, rising, +//! or both edges for edge detect, low or high for level detect). +//! +//! The pin(s) are specified using a bit-packed byte, where each bit that is +//! set identifies the pin to be accessed, and where bit 0 of the byte +//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on. +//! +//! \note In order to avoid any spurious interrupts, the user must +//! ensure that the GPIO inputs remain stable for the duration of +//! this function. +//! +//! \return None. +// +//***************************************************************************** +void +GPIOIntTypeSet(unsigned long ulPort, unsigned char ucPins, + unsigned long ulIntType) +{ + // + // Check the arguments. + // + ASSERT(GPIOBaseValid(ulPort)); + ASSERT((ulIntType == GPIO_FALLING_EDGE) || + (ulIntType == GPIO_RISING_EDGE) || (ulIntType == GPIO_BOTH_EDGES) || + (ulIntType == GPIO_LOW_LEVEL) || (ulIntType == GPIO_HIGH_LEVEL)); + + // + // Set the pin interrupt type. + // + HWREG(ulPort + GPIO_O_IBE) = ((ulIntType & 1) ? + (HWREG(ulPort + GPIO_O_IBE) | ucPins) : + (HWREG(ulPort + GPIO_O_IBE) & ~(ucPins))); + HWREG(ulPort + GPIO_O_IS) = ((ulIntType & 2) ? + (HWREG(ulPort + GPIO_O_IS) | ucPins) : + (HWREG(ulPort + GPIO_O_IS) & ~(ucPins))); + HWREG(ulPort + GPIO_O_IEV) = ((ulIntType & 4) ? + (HWREG(ulPort + GPIO_O_IEV) | ucPins) : + (HWREG(ulPort + GPIO_O_IEV) & ~(ucPins))); +} + +//***************************************************************************** +// +//! Gets the interrupt type for a pin. +//! +//! \param ulPort is the base address of the GPIO port. +//! \param ucPin is the pin number. +//! +//! This function gets the interrupt type for a specified pin on the selected +//! GPIO port. The pin can be configured as a falling edge, rising edge, or +//! both edge detected interrupt, or it can be configured as a low level or +//! high level detected interrupt. The type of interrupt detection mechanism +//! is returned as an enumerated data type. +//! +//! \return Returns one of the enumerated data types described for +//! GPIOIntTypeSet(). +// +//***************************************************************************** +unsigned long +GPIOIntTypeGet(unsigned long ulPort, unsigned char ucPin) +{ + unsigned long ulIBE, ulIS, ulIEV; + + // + // Check the arguments. + // + ASSERT(GPIOBaseValid(ulPort)); + ASSERT(ucPin < 8); + + // + // Convert from a pin number to a bit position. + // + ucPin = 1 << ucPin; + + // + // Return the pin interrupt type. + // + ulIBE = HWREG(ulPort + GPIO_O_IBE); + ulIS = HWREG(ulPort + GPIO_O_IS); + ulIEV = HWREG(ulPort + GPIO_O_IEV); + return(((ulIBE & ucPin) ? 1 : 0) | ((ulIS & ucPin) ? 2 : 0) | + ((ulIEV & ucPin) ? 4 : 0)); +} + +//***************************************************************************** +// +//! Sets the pad configuration for the specified pin(s). +//! +//! \param ulPort is the base address of the GPIO port. +//! \param ucPins is the bit-packed representation of the pin(s). +//! \param ulStrength specifies the output drive strength. +//! \param ulPinType specifies the pin type. +//! +//! This function sets the drive strength and type for the specified pin(s) +//! on the selected GPIO port. For pin(s) configured as input ports, the +//! pad is configured as requested, but the only real effect on the input +//! is the configuration of the pull-up or pull-down termination. +//! +//! The parameter \e ulStrength can be one of the following values: +//! +//! - \b GPIO_STRENGTH_2MA +//! - \b GPIO_STRENGTH_4MA +//! - \b GPIO_STRENGTH_8MA +//! - \b GPIO_STRENGTH_8MA_SC +//! +//! where \b GPIO_STRENGTH_xMA specifies either 2, 4, or 8 mA output drive +//! strength, and \b GPIO_OUT_STRENGTH_8MA_SC specifies 8 mA output drive with +//! slew control. +//! +//! The parameter \e ulPinType can be one of the following values: +//! +//! - \b GPIO_PIN_TYPE_STD +//! - \b GPIO_PIN_TYPE_STD_WPU +//! - \b GPIO_PIN_TYPE_STD_WPD +//! - \b GPIO_PIN_TYPE_OD +//! - \b GPIO_PIN_TYPE_OD_WPU +//! - \b GPIO_PIN_TYPE_OD_WPD +//! - \b GPIO_PIN_TYPE_ANALOG +//! +//! where \b GPIO_PIN_TYPE_STD* specifies a push-pull pin, \b GPIO_PIN_TYPE_OD* +//! specifies an open-drain pin, \b *_WPU specifies a weak pull-up, \b *_WPD +//! specifies a weak pull-down, and \b GPIO_PIN_TYPE_ANALOG specifies an +//! analog input (for the comparators). +//! +//! The pin(s) are specified using a bit-packed byte, where each bit that is +//! set identifies the pin to be accessed, and where bit 0 of the byte +//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on. +//! +//! \return None. +// +//***************************************************************************** +void +GPIOPadConfigSet(unsigned long ulPort, unsigned char ucPins, + unsigned long ulStrength, unsigned long ulPinType) +{ + // + // Check the arguments. + // + ASSERT(GPIOBaseValid(ulPort)); + ASSERT((ulStrength == GPIO_STRENGTH_2MA) || + (ulStrength == GPIO_STRENGTH_4MA) || + (ulStrength == GPIO_STRENGTH_8MA) || + (ulStrength == GPIO_STRENGTH_8MA_SC)); + ASSERT((ulPinType == GPIO_PIN_TYPE_STD) || + (ulPinType == GPIO_PIN_TYPE_STD_WPU) || + (ulPinType == GPIO_PIN_TYPE_STD_WPD) || + (ulPinType == GPIO_PIN_TYPE_OD) || + (ulPinType == GPIO_PIN_TYPE_OD_WPU) || + (ulPinType == GPIO_PIN_TYPE_OD_WPD) || + (ulPinType == GPIO_PIN_TYPE_ANALOG)) + + // + // Set the output drive strength. + // + HWREG(ulPort + GPIO_O_DR2R) = ((ulStrength & 1) ? + (HWREG(ulPort + GPIO_O_DR2R) | ucPins) : + (HWREG(ulPort + GPIO_O_DR2R) & ~(ucPins))); + HWREG(ulPort + GPIO_O_DR4R) = ((ulStrength & 2) ? + (HWREG(ulPort + GPIO_O_DR4R) | ucPins) : + (HWREG(ulPort + GPIO_O_DR4R) & ~(ucPins))); + HWREG(ulPort + GPIO_O_DR8R) = ((ulStrength & 4) ? + (HWREG(ulPort + GPIO_O_DR8R) | ucPins) : + (HWREG(ulPort + GPIO_O_DR8R) & ~(ucPins))); + HWREG(ulPort + GPIO_O_SLR) = ((ulStrength & 8) ? + (HWREG(ulPort + GPIO_O_SLR) | ucPins) : + (HWREG(ulPort + GPIO_O_SLR) & ~(ucPins))); + + // + // Set the pin type. + // + HWREG(ulPort + GPIO_O_ODR) = ((ulPinType & 1) ? + (HWREG(ulPort + GPIO_O_ODR) | ucPins) : + (HWREG(ulPort + GPIO_O_ODR) & ~(ucPins))); + HWREG(ulPort + GPIO_O_PUR) = ((ulPinType & 2) ? + (HWREG(ulPort + GPIO_O_PUR) | ucPins) : + (HWREG(ulPort + GPIO_O_PUR) & ~(ucPins))); + HWREG(ulPort + GPIO_O_PDR) = ((ulPinType & 4) ? + (HWREG(ulPort + GPIO_O_PDR) | ucPins) : + (HWREG(ulPort + GPIO_O_PDR) & ~(ucPins))); + HWREG(ulPort + GPIO_O_DEN) = ((ulPinType & 8) ? + (HWREG(ulPort + GPIO_O_DEN) | ucPins) : + (HWREG(ulPort + GPIO_O_DEN) & ~(ucPins))); + + // + // Set the analog mode select register. This register only appears in + // DustDevil-class (and later) devices, but is a harmless write on + // Sandstorm- and Fury-class devices. + // + HWREG(ulPort + GPIO_O_AMSEL) = + ((ulPinType == GPIO_PIN_TYPE_ANALOG) ? + (HWREG(ulPort + GPIO_O_AMSEL) | ucPins) : + (HWREG(ulPort + GPIO_O_AMSEL) & ~(ucPins))); +} + +//***************************************************************************** +// +//! Gets the pad configuration for a pin. +//! +//! \param ulPort is the base address of the GPIO port. +//! \param ucPin is the pin number. +//! \param pulStrength is a pointer to storage for the output drive strength. +//! \param pulPinType is a pointer to storage for the output drive type. +//! +//! This function gets the pad configuration for a specified pin on the +//! selected GPIO port. The values returned in \e pulStrength and +//! \e pulPinType correspond to the values used in GPIOPadConfigSet(). This +//! function also works for pin(s) configured as input pin(s); however, the +//! only meaningful data returned is whether the pin is terminated with a +//! pull-up or down resistor. +//! +//! \return None +// +//***************************************************************************** +void +GPIOPadConfigGet(unsigned long ulPort, unsigned char ucPin, + unsigned long *pulStrength, unsigned long *pulPinType) +{ + unsigned long ulTemp1, ulTemp2, ulTemp3, ulTemp4; + + // + // Check the arguments. + // + ASSERT(GPIOBaseValid(ulPort)); + ASSERT(ucPin < 8); + + // + // Convert from a pin number to a bit position. + // + ucPin = (1 << ucPin); + + // + // Get the drive strength for this pin. + // + ulTemp1 = HWREG(ulPort + GPIO_O_DR2R); + ulTemp2 = HWREG(ulPort + GPIO_O_DR4R); + ulTemp3 = HWREG(ulPort + GPIO_O_DR8R); + ulTemp4 = HWREG(ulPort + GPIO_O_SLR); + *pulStrength = (((ulTemp1 & ucPin) ? 1 : 0) | ((ulTemp2 & ucPin) ? 2 : 0) | + ((ulTemp3 & ucPin) ? 4 : 0) | ((ulTemp4 & ucPin) ? 8 : 0)); + + // + // Get the pin type. + // + ulTemp1 = HWREG(ulPort + GPIO_O_ODR); + ulTemp2 = HWREG(ulPort + GPIO_O_PUR); + ulTemp3 = HWREG(ulPort + GPIO_O_PDR); + ulTemp4 = HWREG(ulPort + GPIO_O_DEN); + *pulPinType = (((ulTemp1 & ucPin) ? 1 : 0) | ((ulTemp2 & ucPin) ? 2 : 0) | + ((ulTemp3 & ucPin) ? 4 : 0) | ((ulTemp4 & ucPin) ? 8 : 0)); +} + +//***************************************************************************** +// +//! Enables interrupts for the specified pin(s). +//! +//! \param ulPort is the base address of the GPIO port. +//! \param ucPins is the bit-packed representation of the pin(s). +//! +//! Unmasks the interrupt for the specified pin(s). +//! +//! The pin(s) are specified using a bit-packed byte, where each bit that is +//! set identifies the pin to be accessed, and where bit 0 of the byte +//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on. +//! +//! \return None. +// +//***************************************************************************** +void +GPIOPinIntEnable(unsigned long ulPort, unsigned char ucPins) +{ + // + // Check the arguments. + // + ASSERT(GPIOBaseValid(ulPort)); + + // + // Enable the interrupts. + // + HWREG(ulPort + GPIO_O_IM) |= ucPins; +} + +//***************************************************************************** +// +//! Disables interrupts for the specified pin(s). +//! +//! \param ulPort is the base address of the GPIO port. +//! \param ucPins is the bit-packed representation of the pin(s). +//! +//! Masks the interrupt for the specified pin(s). +//! +//! The pin(s) are specified using a bit-packed byte, where each bit that is +//! set identifies the pin to be accessed, and where bit 0 of the byte +//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on. +//! +//! \return None. +// +//***************************************************************************** +void +GPIOPinIntDisable(unsigned long ulPort, unsigned char ucPins) +{ + // + // Check the arguments. + // + ASSERT(GPIOBaseValid(ulPort)); + + // + // Disable the interrupts. + // + HWREG(ulPort + GPIO_O_IM) &= ~(ucPins); +} + +//***************************************************************************** +// +//! Gets interrupt status for the specified GPIO port. +//! +//! \param ulPort is the base address of the GPIO port. +//! \param bMasked specifies whether masked or raw interrupt status is +//! returned. +//! +//! If \e bMasked is set as \b true, then the masked interrupt status is +//! returned; otherwise, the raw interrupt status will be returned. +//! +//! \return Returns a bit-packed byte, where each bit that is set identifies +//! an active masked or raw interrupt, and where bit 0 of the byte +//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on. +//! Bits 31:8 should be ignored. +// +//***************************************************************************** +long +GPIOPinIntStatus(unsigned long ulPort, tBoolean bMasked) +{ + // + // Check the arguments. + // + ASSERT(GPIOBaseValid(ulPort)); + + // + // Return the interrupt status. + // + if(bMasked) + { + return(HWREG(ulPort + GPIO_O_MIS)); + } + else + { + return(HWREG(ulPort + GPIO_O_RIS)); + } +} + +//***************************************************************************** +// +//! Clears the interrupt for the specified pin(s). +//! +//! \param ulPort is the base address of the GPIO port. +//! \param ucPins is the bit-packed representation of the pin(s). +//! +//! Clears the interrupt for the specified pin(s). +//! +//! The pin(s) are specified using a bit-packed byte, where each bit that is +//! set identifies the pin to be accessed, and where bit 0 of the byte +//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on. +//! +//! \note Since there is a write buffer in the Cortex-M3 processor, it may take +//! several clock cycles before the interrupt source is actually cleared. +//! Therefore, it is recommended that the interrupt source be cleared early in +//! the interrupt handler (as opposed to the very last action) to avoid +//! returning from the interrupt handler before the interrupt source is +//! actually cleared. Failure to do so may result in the interrupt handler +//! being immediately reentered (since NVIC still sees the interrupt source +//! asserted). +//! +//! \return None. +// +//***************************************************************************** +void +GPIOPinIntClear(unsigned long ulPort, unsigned char ucPins) +{ + // + // Check the arguments. + // + ASSERT(GPIOBaseValid(ulPort)); + + // + // Clear the interrupts. + // + HWREG(ulPort + GPIO_O_ICR) = ucPins; +} + +//***************************************************************************** +// +//! Registers an interrupt handler for a GPIO port. +//! +//! \param ulPort is the base address of the GPIO port. +//! \param pfnIntHandler is a pointer to the GPIO port interrupt handling +//! function. +//! +//! This function will ensure that the interrupt handler specified by +//! \e pfnIntHandler is called when an interrupt is detected from the selected +//! GPIO port. This function will also enable the corresponding GPIO interrupt +//! in the interrupt controller; individual pin interrupts and interrupt +//! sources must be enabled with GPIOPinIntEnable(). +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +GPIOPortIntRegister(unsigned long ulPort, void (*pfnIntHandler)(void)) +{ + // + // Check the arguments. + // + ASSERT(GPIOBaseValid(ulPort)); + + // + // Get the interrupt number associated with the specified GPIO. + // + ulPort = GPIOGetIntNumber(ulPort); + + // + // Register the interrupt handler. + // + IntRegister(ulPort, pfnIntHandler); + + // + // Enable the GPIO interrupt. + // + IntEnable(ulPort); +} + +//***************************************************************************** +// +//! Removes an interrupt handler for a GPIO port. +//! +//! \param ulPort is the base address of the GPIO port. +//! +//! This function will unregister the interrupt handler for the specified +//! GPIO port. This function will also disable the corresponding +//! GPIO port interrupt in the interrupt controller; individual GPIO interrupts +//! and interrupt sources must be disabled with GPIOPinIntDisable(). +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +GPIOPortIntUnregister(unsigned long ulPort) +{ + // + // Check the arguments. + // + ASSERT(GPIOBaseValid(ulPort)); + + // + // Get the interrupt number associated with the specified GPIO. + // + ulPort = GPIOGetIntNumber(ulPort); + + // + // Disable the GPIO interrupt. + // + IntDisable(ulPort); + + // + // Unregister the interrupt handler. + // + IntUnregister(ulPort); +} + +//***************************************************************************** +// +//! Reads the values present of the specified pin(s). +//! +//! \param ulPort is the base address of the GPIO port. +//! \param ucPins is the bit-packed representation of the pin(s). +//! +//! The values at the specified pin(s) are read, as specified by \e ucPins. +//! Values are returned for both input and output pin(s), and the value +//! for pin(s) that are not specified by \e ucPins are set to 0. +//! +//! The pin(s) are specified using a bit-packed byte, where each bit that is +//! set identifies the pin to be accessed, and where bit 0 of the byte +//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on. +//! +//! \return Returns a bit-packed byte providing the state of the specified +//! pin, where bit 0 of the byte represents GPIO port pin 0, bit 1 represents +//! GPIO port pin 1, and so on. Any bit that is not specified by \e ucPins +//! is returned as a 0. Bits 31:8 should be ignored. +// +//***************************************************************************** +long +GPIOPinRead(unsigned long ulPort, unsigned char ucPins) +{ + // + // Check the arguments. + // + ASSERT(GPIOBaseValid(ulPort)); + + // + // Return the pin value(s). + // + return(HWREG(ulPort + (GPIO_O_DATA + (ucPins << 2)))); +} + +//***************************************************************************** +// +//! Writes a value to the specified pin(s). +//! +//! \param ulPort is the base address of the GPIO port. +//! \param ucPins is the bit-packed representation of the pin(s). +//! \param ucVal is the value to write to the pin(s). +//! +//! Writes the corresponding bit values to the output pin(s) specified by +//! \e ucPins. Writing to a pin configured as an input pin has no effect. +//! +//! The pin(s) are specified using a bit-packed byte, where each bit that is +//! set identifies the pin to be accessed, and where bit 0 of the byte +//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on. +//! +//! \return None. +// +//***************************************************************************** +void +GPIOPinWrite(unsigned long ulPort, unsigned char ucPins, unsigned char ucVal) +{ + // + // Check the arguments. + // + ASSERT(GPIOBaseValid(ulPort)); + + // + // Write the pins. + // + HWREG(ulPort + (GPIO_O_DATA + (ucPins << 2))) = ucVal; +} + +//***************************************************************************** +// +//! Configures pin(s) for use as analog-to-digital converter inputs. +//! +//! \param ulPort is the base address of the GPIO port. +//! \param ucPins is the bit-packed representation of the pin(s). +//! +//! The analog-to-digital converter input pins must be properly configured +//! to function correctly on DustDevil-class devices. This function provides +//! the proper configuration for those pin(s). +//! +//! The pin(s) are specified using a bit-packed byte, where each bit that is +//! set identifies the pin to be accessed, and where bit 0 of the byte +//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on. +//! +//! \note This cannot be used to turn any pin into an ADC input; it only +//! configures an ADC input pin for proper operation. +//! +//! \return None. +// +//***************************************************************************** +void +GPIOPinTypeADC(unsigned long ulPort, unsigned char ucPins) +{ + // + // Check the arguments. + // + ASSERT(GPIOBaseValid(ulPort)); + + // + // Make the pin(s) be inputs. + // + GPIODirModeSet(ulPort, ucPins, GPIO_DIR_MODE_IN); + + // + // Set the pad(s) for analog operation. + // + GPIOPadConfigSet(ulPort, ucPins, GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_ANALOG); +} + +//***************************************************************************** +// +//! Configures pin(s) for use as a CAN device. +//! +//! \param ulPort is the base address of the GPIO port. +//! \param ucPins is the bit-packed representation of the pin(s). +//! +//! The CAN pins must be properly configured for the CAN peripherals to +//! function correctly. This function provides a typical configuration for +//! those pin(s); other configurations may work as well depending upon the +//! board setup (for example, using the on-chip pull-ups). +//! +//! The pin(s) are specified using a bit-packed byte, where each bit that is +//! set identifies the pin to be accessed, and where bit 0 of the byte +//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on. +//! +//! \note This cannot be used to turn any pin into a CAN pin; it only +//! configures a CAN pin for proper operation. +//! +//! \return None. +// +//***************************************************************************** +void +GPIOPinTypeCAN(unsigned long ulPort, unsigned char ucPins) +{ + // + // Check the arguments. + // + ASSERT(GPIOBaseValid(ulPort)); + + // + // Make the pin(s) be inputs. + // + GPIODirModeSet(ulPort, ucPins, GPIO_DIR_MODE_HW); + + // + // Set the pad(s) for standard push-pull operation. + // + GPIOPadConfigSet(ulPort, ucPins, GPIO_STRENGTH_8MA, GPIO_PIN_TYPE_STD); +} + +//***************************************************************************** +// +//! Configures pin(s) for use as an analog comparator input. +//! +//! \param ulPort is the base address of the GPIO port. +//! \param ucPins is the bit-packed representation of the pin(s). +//! +//! The analog comparator input pins must be properly configured for the analog +//! comparator to function correctly. This function provides the proper +//! configuration for those pin(s). +//! +//! The pin(s) are specified using a bit-packed byte, where each bit that is +//! set identifies the pin to be accessed, and where bit 0 of the byte +//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on. +//! +//! \note This cannot be used to turn any pin into an analog comparator input; +//! it only configures an analog comparator pin for proper operation. +//! +//! \return None. +// +//***************************************************************************** +void +GPIOPinTypeComparator(unsigned long ulPort, unsigned char ucPins) +{ + // + // Check the arguments. + // + ASSERT(GPIOBaseValid(ulPort)); + + // + // Make the pin(s) be inputs. + // + GPIODirModeSet(ulPort, ucPins, GPIO_DIR_MODE_IN); + + // + // Set the pad(s) for analog operation. + // + GPIOPadConfigSet(ulPort, ucPins, GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_ANALOG); +} + +//***************************************************************************** +// +//! Configures pin(s) for use as GPIO inputs. +//! +//! \param ulPort is the base address of the GPIO port. +//! \param ucPins is the bit-packed representation of the pin(s). +//! +//! The GPIO pins must be properly configured in order to function correctly as +//! GPIO inputs; this is especially true of Fury-class devices where the +//! digital input enable is turned off by default. This function provides the +//! proper configuration for those pin(s). +//! +//! The pin(s) are specified using a bit-packed byte, where each bit that is +//! set identifies the pin to be accessed, and where bit 0 of the byte +//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on. +//! +//! \return None. +// +//***************************************************************************** +void +GPIOPinTypeGPIOInput(unsigned long ulPort, unsigned char ucPins) +{ + // + // Check the arguments. + // + ASSERT(GPIOBaseValid(ulPort)); + + // + // Make the pin(s) be inputs. + // + GPIODirModeSet(ulPort, ucPins, GPIO_DIR_MODE_IN); + + // + // Set the pad(s) for standard push-pull operation. + // + GPIOPadConfigSet(ulPort, ucPins, GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_STD); +} + +//***************************************************************************** +// +//! Configures pin(s) for use as GPIO outputs. +//! +//! \param ulPort is the base address of the GPIO port. +//! \param ucPins is the bit-packed representation of the pin(s). +//! +//! The GPIO pins must be properly configured in order to function correctly as +//! GPIO outputs; this is especially true of Fury-class devices where the +//! digital input enable is turned off by default. This function provides the +//! proper configuration for those pin(s). +//! +//! The pin(s) are specified using a bit-packed byte, where each bit that is +//! set identifies the pin to be accessed, and where bit 0 of the byte +//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on. +//! +//! \return None. +// +//***************************************************************************** +void +GPIOPinTypeGPIOOutput(unsigned long ulPort, unsigned char ucPins) +{ + // + // Check the arguments. + // + ASSERT(GPIOBaseValid(ulPort)); + + // + // Make the pin(s) be outputs. + // + GPIODirModeSet(ulPort, ucPins, GPIO_DIR_MODE_OUT); + + // + // Set the pad(s) for standard push-pull operation. + // + GPIOPadConfigSet(ulPort, ucPins, GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_STD); +} + +//***************************************************************************** +// +//! Configures pin(s) for use as GPIO open drain outputs. +//! +//! \param ulPort is the base address of the GPIO port. +//! \param ucPins is the bit-packed representation of the pin(s). +//! +//! The GPIO pins must be properly configured in order to function correctly as +//! GPIO outputs; this is especially true of Fury-class devices where the +//! digital input enable is turned off by default. This function provides the +//! proper configuration for those pin(s). +//! +//! The pin(s) are specified using a bit-packed byte, where each bit that is +//! set identifies the pin to be accessed, and where bit 0 of the byte +//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on. +//! +//! \return None. +// +//***************************************************************************** +void +GPIOPinTypeGPIOOutputOD(unsigned long ulPort, unsigned char ucPins) +{ + // + // Check the arguments. + // + ASSERT(GPIOBaseValid(ulPort)); + + // + // Make the pin(s) be outputs. + // + GPIODirModeSet(ulPort, ucPins, GPIO_DIR_MODE_OUT); + + // + // Set the pad(s) for standard push-pull operation. + // + GPIOPadConfigSet(ulPort, ucPins, GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_OD); +} + +//***************************************************************************** +// +//! Configures pin(s) for use by the I2C peripheral. +//! +//! \param ulPort is the base address of the GPIO port. +//! \param ucPins is the bit-packed representation of the pin(s). +//! +//! The I2C pins must be properly configured for the I2C peripheral to function +//! correctly. This function provides the proper configuration for those +//! pin(s). +//! +//! The pin(s) are specified using a bit-packed byte, where each bit that is +//! set identifies the pin to be accessed, and where bit 0 of the byte +//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on. +//! +//! \note This cannot be used to turn any pin into an I2C pin; it only +//! configures an I2C pin for proper operation. +//! +//! \return None. +// +//***************************************************************************** +void +GPIOPinTypeI2C(unsigned long ulPort, unsigned char ucPins) +{ + // + // Check the arguments. + // + ASSERT(GPIOBaseValid(ulPort)); + + // + // Make the pin(s) be peripheral controlled. + // + GPIODirModeSet(ulPort, ucPins, GPIO_DIR_MODE_HW); + + // + // Set the pad(s) for open-drain operation with a weak pull-up. + // + GPIOPadConfigSet(ulPort, ucPins, GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_OD_WPU); +} + +//***************************************************************************** +// +//! Configures pin(s) for use by the PWM peripheral. +//! +//! \param ulPort is the base address of the GPIO port. +//! \param ucPins is the bit-packed representation of the pin(s). +//! +//! The PWM pins must be properly configured for the PWM peripheral to function +//! correctly. This function provides a typical configuration for those +//! pin(s); other configurations may work as well depending upon the board +//! setup (for example, using the on-chip pull-ups). +//! +//! The pin(s) are specified using a bit-packed byte, where each bit that is +//! set identifies the pin to be accessed, and where bit 0 of the byte +//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on. +//! +//! \note This cannot be used to turn any pin into a PWM pin; it only +//! configures a PWM pin for proper operation. +//! +//! \return None. +// +//***************************************************************************** +void +GPIOPinTypePWM(unsigned long ulPort, unsigned char ucPins) +{ + // + // Check the arguments. + // + ASSERT(GPIOBaseValid(ulPort)); + + // + // Make the pin(s) be peripheral controlled. + // + GPIODirModeSet(ulPort, ucPins, GPIO_DIR_MODE_HW); + + // + // Set the pad(s) for standard push-pull operation. + // + GPIOPadConfigSet(ulPort, ucPins, GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_STD); +} + +//***************************************************************************** +// +//! Configures pin(s) for use by the QEI peripheral. +//! +//! \param ulPort is the base address of the GPIO port. +//! \param ucPins is the bit-packed representation of the pin(s). +//! +//! The QEI pins must be properly configured for the QEI peripheral to function +//! correctly. This function provides a typical configuration for those +//! pin(s); other configurations may work as well depending upon the board +//! setup (for example, not using the on-chip pull-ups). +//! +//! The pin(s) are specified using a bit-packed byte, where each bit that is +//! set identifies the pin to be accessed, and where bit 0 of the byte +//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on. +//! +//! \note This cannot be used to turn any pin into a QEI pin; it only +//! configures a QEI pin for proper operation. +//! +//! \return None. +// +//***************************************************************************** +void +GPIOPinTypeQEI(unsigned long ulPort, unsigned char ucPins) +{ + // + // Check the arguments. + // + ASSERT(GPIOBaseValid(ulPort)); + + // + // Make the pin(s) be peripheral controlled. + // + GPIODirModeSet(ulPort, ucPins, GPIO_DIR_MODE_HW); + + // + // Set the pad(s) for standard push-pull operation with a weak pull-up. + // + GPIOPadConfigSet(ulPort, ucPins, GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_STD_WPU); +} + +//***************************************************************************** +// +//! Configures pin(s) for use by the SSI peripheral. +//! +//! \param ulPort is the base address of the GPIO port. +//! \param ucPins is the bit-packed representation of the pin(s). +//! +//! The SSI pins must be properly configured for the SSI peripheral to function +//! correctly. This function provides a typical configuration for those +//! pin(s); other configurations may work as well depending upon the board +//! setup (for example, using the on-chip pull-ups). +//! +//! The pin(s) are specified using a bit-packed byte, where each bit that is +//! set identifies the pin to be accessed, and where bit 0 of the byte +//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on. +//! +//! \note This cannot be used to turn any pin into a SSI pin; it only +//! configures a SSI pin for proper operation. +//! +//! \return None. +// +//***************************************************************************** +void +GPIOPinTypeSSI(unsigned long ulPort, unsigned char ucPins) +{ + // + // Check the arguments. + // + ASSERT(GPIOBaseValid(ulPort)); + + // + // Make the pin(s) be peripheral controlled. + // + GPIODirModeSet(ulPort, ucPins, GPIO_DIR_MODE_HW); + + // + // Set the pad(s) for standard push-pull operation. + // + GPIOPadConfigSet(ulPort, ucPins, GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_STD); +} + +//***************************************************************************** +// +//! Configures pin(s) for use by the Timer peripheral. +//! +//! \param ulPort is the base address of the GPIO port. +//! \param ucPins is the bit-packed representation of the pin(s). +//! +//! The CCP pins must be properly configured for the timer peripheral to +//! function correctly. This function provides a typical configuration for +//! those pin(s); other configurations may work as well depending upon the +//! board setup (for example, using the on-chip pull-ups). +//! +//! The pin(s) are specified using a bit-packed byte, where each bit that is +//! set identifies the pin to be accessed, and where bit 0 of the byte +//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on. +//! +//! \note This cannot be used to turn any pin into a timer pin; it only +//! configures a timer pin for proper operation. +//! +//! \return None. +// +//***************************************************************************** +void +GPIOPinTypeTimer(unsigned long ulPort, unsigned char ucPins) +{ + // + // Check the arguments. + // + ASSERT(GPIOBaseValid(ulPort)); + + // + // Make the pin(s) be peripheral controlled. + // + GPIODirModeSet(ulPort, ucPins, GPIO_DIR_MODE_HW); + + // + // Set the pad(s) for standard push-pull operation. + // + GPIOPadConfigSet(ulPort, ucPins, GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_STD); +} + +//***************************************************************************** +// +//! Configures pin(s) for use by the UART peripheral. +//! +//! \param ulPort is the base address of the GPIO port. +//! \param ucPins is the bit-packed representation of the pin(s). +//! +//! The UART pins must be properly configured for the UART peripheral to +//! function correctly. This function provides a typical configuration for +//! those pin(s); other configurations may work as well depending upon the +//! board setup (for example, using the on-chip pull-ups). +//! +//! The pin(s) are specified using a bit-packed byte, where each bit that is +//! set identifies the pin to be accessed, and where bit 0 of the byte +//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on. +//! +//! \note This cannot be used to turn any pin into a UART pin; it only +//! configures a UART pin for proper operation. +//! +//! \return None. +// +//***************************************************************************** +void +GPIOPinTypeUART(unsigned long ulPort, unsigned char ucPins) +{ + // + // Check the arguments. + // + ASSERT(GPIOBaseValid(ulPort)); + + // + // Make the pin(s) be peripheral controlled. + // + GPIODirModeSet(ulPort, ucPins, GPIO_DIR_MODE_HW); + + // + // Set the pad(s) for standard push-pull operation. + // + GPIOPadConfigSet(ulPort, ucPins, GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_STD); +} + +//***************************************************************************** +// +//! Configures pin(s) for use by the USB peripheral. +//! +//! \param ulPort is the base address of the GPIO port. +//! \param ucPins is the bit-packed representation of the pin(s). +//! +//! Some USB digital pins must be properly configured for the USB peripheral to +//! function correctly. This function provides a typical configuration for +//! the digital USB pin(s); other configurations may work as well depending +//! upon the board setup (for example, using the on-chip pull-ups). +//! +//! This function should only be used with EPEN and PFAULT pins as all other +//! USB pins are analog in nature or are not used in devices without OTG +//! functionality. +//! +//! The pin(s) are specified using a bit-packed byte, where each bit that is +//! set identifies the pin to be accessed, and where bit 0 of the byte +//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on. +//! +//! \note This cannot be used to turn any pin into a USB pin; it only +//! configures a USB pin for proper operation. +//! +//! \return None. +// +//***************************************************************************** +void +GPIOPinTypeUSBDigital(unsigned long ulPort, unsigned char ucPins) +{ + // + // Check the arguments. + // + ASSERT(GPIOBaseValid(ulPort)); + + // + // Make the pin(s) be peripheral controlled. + // + GPIODirModeSet(ulPort, ucPins, GPIO_DIR_MODE_HW); + + // + // Set the pad(s) for standard push-pull operation. + // + GPIOPadConfigSet(ulPort, ucPins, GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_STD); +} + +//***************************************************************************** +// +//! Configures pin(s) for use by the USB peripheral. +//! +//! \param ulPort is the base address of the GPIO port. +//! \param ucPins is the bit-packed representation of the pin(s). +//! +//! Some USB analog pins must be properly configured for the USB peripheral to +//! function correctly. This function provides the proper configuration for +//! any USB pin(s). This can also be used to configure the EPEN and PFAULT pins +//! so that they are no longer used by the USB controller. +//! +//! The pin(s) are specified using a bit-packed byte, where each bit that is +//! set identifies the pin to be accessed, and where bit 0 of the byte +//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on. +//! +//! \note This cannot be used to turn any pin into a USB pin; it only +//! configures a USB pin for proper operation. +//! +//! \return None. +// +//***************************************************************************** +void +GPIOPinTypeUSBAnalog(unsigned long ulPort, unsigned char ucPins) +{ + // + // Check the arguments. + // + ASSERT(GPIOBaseValid(ulPort)); + + // + // Make the pin(s) be inputs. + // + GPIODirModeSet(ulPort, ucPins, GPIO_DIR_MODE_IN); + + // + // Set the pad(s) for analog operation. + // + GPIOPadConfigSet(ulPort, ucPins, GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_ANALOG); +} + +//***************************************************************************** +// +//! Configures pin(s) for use by the I2S peripheral. +//! +//! \param ulPort is the base address of the GPIO port. +//! \param ucPins is the bit-packed representation of the pin(s). +//! +//! Some I2S pins must be properly configured for the I2S peripheral to +//! function correctly. This function provides a typical configuration for +//! the digital I2S pin(s); other configurations may work as well depending +//! upon the board setup (for example, using the on-chip pull-ups). +//! +//! The pin(s) are specified using a bit-packed byte, where each bit that is +//! set identifies the pin to be accessed, and where bit 0 of the byte +//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on. +//! +//! \note This cannot be used to turn any pin into a I2S pin; it only +//! configures a I2S pin for proper operation. +//! +//! \return None. +// +//***************************************************************************** +void +GPIOPinTypeI2S(unsigned long ulPort, unsigned char ucPins) +{ + // + // Check the arguments. + // + ASSERT(GPIOBaseValid(ulPort)); + + // + // Make the pin(s) be peripheral controlled. + // + GPIODirModeSet(ulPort, ucPins, GPIO_DIR_MODE_HW); + + // + // Set the pad(s) for standard push-pull operation. + // + GPIOPadConfigSet(ulPort, ucPins, GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_STD); +} + +//***************************************************************************** +// +//! Configures pin(s) for use by the Ethernet peripheral as LED signals. +//! +//! \param ulPort is the base address of the GPIO port. +//! \param ucPins is the bit-packed representation of the pin(s). +//! +//! The Ethernet peripheral provides two signals that can be used to drive +//! an LED (e.g. for link status/activity). This function provides a typical +//! configuration for the pins. +//! +//! The pin(s) are specified using a bit-packed byte, where each bit that is +//! set identifies the pin to be accessed, and where bit 0 of the byte +//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on. +//! +//! \note This cannot be used to turn any pin into an Ethernet LED pin; it only +//! configures an Ethernet LED pin for proper operation. +//! +//! \return None. +// +//***************************************************************************** +void +GPIOPinTypeEthernetLED(unsigned long ulPort, unsigned char ucPins) +{ + // + // Check the arguments. + // + ASSERT(GPIOBaseValid(ulPort)); + + // + // Make the pin(s) be peripheral controlled. + // + GPIODirModeSet(ulPort, ucPins, GPIO_DIR_MODE_HW); + + // + // Set the pad(s) for standard push-pull operation. + // + GPIOPadConfigSet(ulPort, ucPins, GPIO_STRENGTH_8MA, GPIO_PIN_TYPE_STD); +} + +//***************************************************************************** +// +//! Configures pin(s) for use by the external peripheral interface. +//! +//! \param ulPort is the base address of the GPIO port. +//! \param ucPins is the bit-packed representation of the pin(s). +//! +//! The external peripheral interface pins must be properly configured for the +//! external peripheral interface to function correctly. This function +//! provides a typica configuration for those pin(s); other configurations may +//! work as well depending upon the board setup (for exampe, using the on-chip +//! pull-ups). +//! +//! The pin(s) are specified using a bit-packed byte, where each bit that is +//! set identifies the pin to be accessed, and where bit 0 of the byte +//! represents GPIO port pin 0, bit 1 represents GPIO port pin 1, and so on. +//! +//! \note This cannot be used to turn any pin into an external peripheral +//! interface pin; it only configures an external peripheral interface pin for +//! proper operation. +//! +//! \return None. +// +//***************************************************************************** +void +GPIOPinTypeEPI(unsigned long ulPort, unsigned char ucPins) +{ + // + // Check the arguments. + // + ASSERT(GPIOBaseValid(ulPort)); + + // + // Make the pin(s) be peripheral controlled. + // + GPIODirModeSet(ulPort, ucPins, GPIO_DIR_MODE_HW); + + // + // Set the pad(s) for standard push-pull operation. + // + GPIOPadConfigSet(ulPort, ucPins, GPIO_STRENGTH_8MA, GPIO_PIN_TYPE_STD); +} + +//***************************************************************************** +// +//! Configures the alternate function of a GPIO pin. +//! +//! \param ulPinConfig is the pin configuration value, specified as only one of +//! the \b GPIO_P??_??? values. +//! +//! This function configures the pin mux that selects the peripheral function +//! associated with a particular GPIO pin. Only one peripheral function at a +//! time can be associated with a GPIO pin, and each peripheral function should +//! only be associated with a single GPIO pin at a time (despite the fact that +//! many of them can be associated with more than one GPIO pin). +//! +//! \note This function is only valid on Tempest-class devices. +//! +//! \return None. +// +//***************************************************************************** +void +GPIOPinConfigure(unsigned long ulPinConfig) +{ + unsigned long ulBase, ulShift; + + // + // Check the argument. + // + ASSERT(((ulPinConfig >> 16) & 0xff) < 9); + ASSERT(((ulPinConfig >> 8) & 0xe3) == 0); + + // + // Extract the base address index from the input value. + // + ulBase = (ulPinConfig >> 16) & 0xff; + + // + // Get the base address of the GPIO module, selecting either the APB or the + // AHB aperture as appropriate. + // + if(HWREG(SYSCTL_GPIOHSCTL) & (1 << ulBase)) + { + ulBase = g_pulGPIOBaseAddrs[(ulBase << 1) + 1]; + } + else + { + ulBase = g_pulGPIOBaseAddrs[ulBase << 1]; + } + + // + // Extract the shift from the input value. + // + ulShift = (ulPinConfig >> 8) & 0xff; + + // + // Write the requested pin muxing value for this GPIO pin. + // + HWREG(ulBase + GPIO_O_PCTL) = ((HWREG(ulBase + GPIO_O_PCTL) & + ~(0xf << ulShift)) | + ((ulPinConfig & 0xf) << ulShift)); + +} + +//***************************************************************************** +// +// Close the Doxygen group. +//! @} +// +//***************************************************************************** diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/gpio.h b/bsp/lm3s_9b9x/Libraries/driverlib/gpio.h new file mode 100644 index 0000000000000000000000000000000000000000..cf1046d55ea7d48d87d3369b0f290ac92bad6339 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/gpio.h @@ -0,0 +1,767 @@ +//***************************************************************************** +// +// gpio.h - Defines and Macros for GPIO API. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +#ifndef __GPIO_H__ +#define __GPIO_H__ + +//***************************************************************************** +// +// If building with a C++ compiler, make all of the definitions in this header +// have a C binding. +// +//***************************************************************************** +#ifdef __cplusplus +extern "C" +{ +#endif + +//***************************************************************************** +// +// The following values define the bit field for the ucPins argument to several +// of the APIs. +// +//***************************************************************************** +#define GPIO_PIN_0 0x00000001 // GPIO pin 0 +#define GPIO_PIN_1 0x00000002 // GPIO pin 1 +#define GPIO_PIN_2 0x00000004 // GPIO pin 2 +#define GPIO_PIN_3 0x00000008 // GPIO pin 3 +#define GPIO_PIN_4 0x00000010 // GPIO pin 4 +#define GPIO_PIN_5 0x00000020 // GPIO pin 5 +#define GPIO_PIN_6 0x00000040 // GPIO pin 6 +#define GPIO_PIN_7 0x00000080 // GPIO pin 7 + +//***************************************************************************** +// +// Values that can be passed to GPIODirModeSet as the ulPinIO parameter, and +// returned from GPIODirModeGet. +// +//***************************************************************************** +#define GPIO_DIR_MODE_IN 0x00000000 // Pin is a GPIO input +#define GPIO_DIR_MODE_OUT 0x00000001 // Pin is a GPIO output +#define GPIO_DIR_MODE_HW 0x00000002 // Pin is a peripheral function + +//***************************************************************************** +// +// Values that can be passed to GPIOIntTypeSet as the ulIntType parameter, and +// returned from GPIOIntTypeGet. +// +//***************************************************************************** +#define GPIO_FALLING_EDGE 0x00000000 // Interrupt on falling edge +#define GPIO_RISING_EDGE 0x00000004 // Interrupt on rising edge +#define GPIO_BOTH_EDGES 0x00000001 // Interrupt on both edges +#define GPIO_LOW_LEVEL 0x00000002 // Interrupt on low level +#define GPIO_HIGH_LEVEL 0x00000007 // Interrupt on high level + +//***************************************************************************** +// +// Values that can be passed to GPIOPadConfigSet as the ulStrength parameter, +// and returned by GPIOPadConfigGet in the *pulStrength parameter. +// +//***************************************************************************** +#define GPIO_STRENGTH_2MA 0x00000001 // 2mA drive strength +#define GPIO_STRENGTH_4MA 0x00000002 // 4mA drive strength +#define GPIO_STRENGTH_8MA 0x00000004 // 8mA drive strength +#define GPIO_STRENGTH_8MA_SC 0x0000000C // 8mA drive with slew rate control + +//***************************************************************************** +// +// Values that can be passed to GPIOPadConfigSet as the ulPadType parameter, +// and returned by GPIOPadConfigGet in the *pulPadType parameter. +// +//***************************************************************************** +#define GPIO_PIN_TYPE_STD 0x00000008 // Push-pull +#define GPIO_PIN_TYPE_STD_WPU 0x0000000A // Push-pull with weak pull-up +#define GPIO_PIN_TYPE_STD_WPD 0x0000000C // Push-pull with weak pull-down +#define GPIO_PIN_TYPE_OD 0x00000009 // Open-drain +#define GPIO_PIN_TYPE_OD_WPU 0x0000000B // Open-drain with weak pull-up +#define GPIO_PIN_TYPE_OD_WPD 0x0000000D // Open-drain with weak pull-down +#define GPIO_PIN_TYPE_ANALOG 0x00000000 // Analog comparator + +//***************************************************************************** +// +// Values that can be passed to GPIOPinConfigure as the ulPinConfig parameter. +// +//***************************************************************************** +// +// GPIO pin A0 +// +#define GPIO_PA0_U0RX 0x00000001 +#define GPIO_PA0_I2C1SCL 0x00000008 +#define GPIO_PA0_U1RX 0x00000009 + +// +// GPIO pin A1 +// +#define GPIO_PA1_U0TX 0x00000401 +#define GPIO_PA1_I2C1SDA 0x00000408 +#define GPIO_PA1_U1TX 0x00000409 + +// +// GPIO pin A2 +// +#define GPIO_PA2_SSI0CLK 0x00000801 +#define GPIO_PA2_PWM4 0x00000804 +#define GPIO_PA2_I2S0RXSD 0x00000809 + +// +// GPIO pin A3 +// +#define GPIO_PA3_SSI0FSS 0x00000c01 +#define GPIO_PA3_PWM5 0x00000c04 +#define GPIO_PA3_I2S0RXMCLK 0x00000c09 + +// +// GPIO pin A4 +// +#define GPIO_PA4_SSI0RX 0x00001001 +#define GPIO_PA4_PWM6 0x00001004 +#define GPIO_PA4_CAN0RX 0x00001005 +#define GPIO_PA4_I2S0TXSCK 0x00001009 + +// +// GPIO pin A5 +// +#define GPIO_PA5_SSI0TX 0x00001401 +#define GPIO_PA5_PWM7 0x00001404 +#define GPIO_PA5_CAN0TX 0x00001405 +#define GPIO_PA5_I2S0TXWS 0x00001409 + +// +// GPIO pin A6 +// +#define GPIO_PA6_I2C1SCL 0x00001801 +#define GPIO_PA6_CCP1 0x00001802 +#define GPIO_PA6_PWM0 0x00001804 +#define GPIO_PA6_PWM4 0x00001805 +#define GPIO_PA6_CAN0RX 0x00001806 +#define GPIO_PA6_USB0EPEN 0x00001808 +#define GPIO_PA6_U1CTS 0x00001809 + +// +// GPIO pin A7 +// +#define GPIO_PA7_I2C1SDA 0x00001c01 +#define GPIO_PA7_CCP4 0x00001c02 +#define GPIO_PA7_PWM1 0x00001c04 +#define GPIO_PA7_PWM5 0x00001c05 +#define GPIO_PA7_CAN0TX 0x00001c06 +#define GPIO_PA7_CCP3 0x00001c07 +#define GPIO_PA7_USB0PFLT 0x00001c08 +#define GPIO_PA7_U1DCD 0x00001c09 + +// +// GPIO pin B0 +// +#define GPIO_PB0_CCP0 0x00010001 +#define GPIO_PB0_PWM2 0x00010002 +#define GPIO_PB0_U1RX 0x00010005 + +// +// GPIO pin B1 +// +#define GPIO_PB1_CCP2 0x00010401 +#define GPIO_PB1_PWM3 0x00010402 +#define GPIO_PB1_CCP1 0x00010404 +#define GPIO_PB1_U1TX 0x00010405 + +// +// GPIO pin B2 +// +#define GPIO_PB2_I2C0SCL 0x00010801 +#define GPIO_PB2_IDX0 0x00010802 +#define GPIO_PB2_CCP3 0x00010804 +#define GPIO_PB2_CCP0 0x00010805 +#define GPIO_PB2_USB0EPEN 0x00010808 + +// +// GPIO pin B3 +// +#define GPIO_PB3_I2C0SDA 0x00010c01 +#define GPIO_PB3_FAULT0 0x00010c02 +#define GPIO_PB3_FAULT3 0x00010c04 +#define GPIO_PB3_USB0PFLT 0x00010c08 + +// +// GPIO pin B4 +// +#define GPIO_PB4_U2RX 0x00011004 +#define GPIO_PB4_CAN0RX 0x00011005 +#define GPIO_PB4_IDX0 0x00011006 +#define GPIO_PB4_U1RX 0x00011007 +#define GPIO_PB4_EPI0S23 0x00011008 + +// +// GPIO pin B5 +// +#define GPIO_PB5_C0O 0x00011401 +#define GPIO_PB5_CCP5 0x00011402 +#define GPIO_PB5_CCP6 0x00011403 +#define GPIO_PB5_CCP0 0x00011404 +#define GPIO_PB5_CAN0TX 0x00011405 +#define GPIO_PB5_CCP2 0x00011406 +#define GPIO_PB5_U1TX 0x00011407 +#define GPIO_PB5_EPI0S22 0x00011408 + +// +// GPIO pin B6 +// +#define GPIO_PB6_CCP1 0x00011801 +#define GPIO_PB6_CCP7 0x00011802 +#define GPIO_PB6_C0O 0x00011803 +#define GPIO_PB6_FAULT1 0x00011804 +#define GPIO_PB6_IDX0 0x00011805 +#define GPIO_PB6_CCP5 0x00011806 +#define GPIO_PB6_I2S0TXSCK 0x00011809 + +// +// GPIO pin B7 +// +#define GPIO_PB7_NMI 0x00011c04 + +// +// GPIO pin C0 +// +#define GPIO_PC0_TCK 0x00020003 + +// +// GPIO pin C1 +// +#define GPIO_PC1_TMS 0x00020403 + +// +// GPIO pin C2 +// +#define GPIO_PC2_TDI 0x00020803 + +// +// GPIO pin C3 +// +#define GPIO_PC3_TDO 0x00020c03 + +// +// GPIO pin C4 +// +#define GPIO_PC4_CCP5 0x00021001 +#define GPIO_PC4_PHA0 0x00021002 +#define GPIO_PC4_PWM6 0x00021004 +#define GPIO_PC4_CCP2 0x00021005 +#define GPIO_PC4_CCP4 0x00021006 +#define GPIO_PC4_EPI0S2 0x00021008 +#define GPIO_PC4_CCP1 0x00021009 + +// +// GPIO pin C5 +// +#define GPIO_PC5_CCP1 0x00021401 +#define GPIO_PC5_C1O 0x00021402 +#define GPIO_PC5_C0O 0x00021403 +#define GPIO_PC5_FAULT2 0x00021404 +#define GPIO_PC5_CCP3 0x00021405 +#define GPIO_PC5_USB0EPEN 0x00021406 +#define GPIO_PC5_EPI0S3 0x00021408 + +// +// GPIO pin C6 +// +#define GPIO_PC6_CCP3 0x00021801 +#define GPIO_PC6_PHB0 0x00021802 +#define GPIO_PC6_C2O 0x00021803 +#define GPIO_PC6_PWM7 0x00021804 +#define GPIO_PC6_U1RX 0x00021805 +#define GPIO_PC6_CCP0 0x00021806 +#define GPIO_PC6_USB0PFLT 0x00021807 +#define GPIO_PC6_EPI0S4 0x00021808 + +// +// GPIO pin C7 +// +#define GPIO_PC7_CCP4 0x00021c01 +#define GPIO_PC7_PHB0 0x00021c02 +#define GPIO_PC7_CCP0 0x00021c04 +#define GPIO_PC7_U1TX 0x00021c05 +#define GPIO_PC7_USB0PFLT 0x00021c06 +#define GPIO_PC7_C1O 0x00021c07 +#define GPIO_PC7_EPI0S5 0x00021c08 + +// +// GPIO pin D0 +// +#define GPIO_PD0_PWM0 0x00030001 +#define GPIO_PD0_CAN0RX 0x00030002 +#define GPIO_PD0_IDX0 0x00030003 +#define GPIO_PD0_U2RX 0x00030004 +#define GPIO_PD0_U1RX 0x00030005 +#define GPIO_PD0_CCP6 0x00030006 +#define GPIO_PD0_I2S0RXSCK 0x00030008 +#define GPIO_PD0_U1CTS 0x00030009 + +// +// GPIO pin D1 +// +#define GPIO_PD1_PWM1 0x00030401 +#define GPIO_PD1_CAN0TX 0x00030402 +#define GPIO_PD1_PHA0 0x00030403 +#define GPIO_PD1_U2TX 0x00030404 +#define GPIO_PD1_U1TX 0x00030405 +#define GPIO_PD1_CCP7 0x00030406 +#define GPIO_PD1_I2S0RXWS 0x00030408 +#define GPIO_PD1_U1DCD 0x00030409 +#define GPIO_PD1_CCP2 0x0003040a +#define GPIO_PD1_PHB1 0x0003040b + +// +// GPIO pin D2 +// +#define GPIO_PD2_U1RX 0x00030801 +#define GPIO_PD2_CCP6 0x00030802 +#define GPIO_PD2_PWM2 0x00030803 +#define GPIO_PD2_CCP5 0x00030804 +#define GPIO_PD2_EPI0S20 0x00030808 + +// +// GPIO pin D3 +// +#define GPIO_PD3_U1TX 0x00030c01 +#define GPIO_PD3_CCP7 0x00030c02 +#define GPIO_PD3_PWM3 0x00030c03 +#define GPIO_PD3_CCP0 0x00030c04 +#define GPIO_PD3_EPI0S21 0x00030c08 + +// +// GPIO pin D4 +// +#define GPIO_PD4_CCP0 0x00031001 +#define GPIO_PD4_CCP3 0x00031002 +#define GPIO_PD4_I2S0RXSD 0x00031008 +#define GPIO_PD4_U1RI 0x00031009 +#define GPIO_PD4_EPI0S19 0x0003100a + +// +// GPIO pin D5 +// +#define GPIO_PD5_CCP2 0x00031401 +#define GPIO_PD5_CCP4 0x00031402 +#define GPIO_PD5_I2S0RXMCLK 0x00031408 +#define GPIO_PD5_U2RX 0x00031409 +#define GPIO_PD5_EPI0S28 0x0003140a + +// +// GPIO pin D6 +// +#define GPIO_PD6_FAULT0 0x00031801 +#define GPIO_PD6_I2S0TXSCK 0x00031808 +#define GPIO_PD6_U2TX 0x00031809 +#define GPIO_PD6_EPI0S29 0x0003180a + +// +// GPIO pin D7 +// +#define GPIO_PD7_IDX0 0x00031c01 +#define GPIO_PD7_C0O 0x00031c02 +#define GPIO_PD7_CCP1 0x00031c03 +#define GPIO_PD7_I2S0TXWS 0x00031c08 +#define GPIO_PD7_U1DTR 0x00031c09 +#define GPIO_PD7_EPI0S30 0x00031c0a + +// +// GPIO pin E0 +// +#define GPIO_PE0_PWM4 0x00040001 +#define GPIO_PE0_SSI1CLK 0x00040002 +#define GPIO_PE0_CCP3 0x00040003 +#define GPIO_PE0_EPI0S8 0x00040008 +#define GPIO_PE0_USB0PFLT 0x00040009 + +// +// GPIO pin E1 +// +#define GPIO_PE1_PWM5 0x00040401 +#define GPIO_PE1_SSI1FSS 0x00040402 +#define GPIO_PE1_FAULT0 0x00040403 +#define GPIO_PE1_CCP2 0x00040404 +#define GPIO_PE1_CCP6 0x00040405 +#define GPIO_PE1_EPI0S9 0x00040408 + +// +// GPIO pin E2 +// +#define GPIO_PE2_CCP4 0x00040801 +#define GPIO_PE2_SSI1RX 0x00040802 +#define GPIO_PE2_PHB1 0x00040803 +#define GPIO_PE2_PHA0 0x00040804 +#define GPIO_PE2_CCP2 0x00040805 +#define GPIO_PE2_EPI0S24 0x00040808 + +// +// GPIO pin E3 +// +#define GPIO_PE3_CCP1 0x00040c01 +#define GPIO_PE3_SSI1TX 0x00040c02 +#define GPIO_PE3_PHA1 0x00040c03 +#define GPIO_PE3_PHB0 0x00040c04 +#define GPIO_PE3_CCP7 0x00040c05 +#define GPIO_PE3_EPI0S25 0x00040c08 + +// +// GPIO pin E4 +// +#define GPIO_PE4_CCP3 0x00041001 +#define GPIO_PE4_FAULT0 0x00041004 +#define GPIO_PE4_U2TX 0x00041005 +#define GPIO_PE4_CCP2 0x00041006 +#define GPIO_PE4_I2S0TXWS 0x00041009 + +// +// GPIO pin E5 +// +#define GPIO_PE5_CCP5 0x00041401 +#define GPIO_PE5_I2S0TXSD 0x00041409 + +// +// GPIO pin E6 +// +#define GPIO_PE6_PWM4 0x00041801 +#define GPIO_PE6_C1O 0x00041802 +#define GPIO_PE6_U1CTS 0x00041809 + +// +// GPIO pin E7 +// +#define GPIO_PE7_PWM5 0x00041c01 +#define GPIO_PE7_C2O 0x00041c02 +#define GPIO_PE7_U1DCD 0x00041c09 + +// +// GPIO pin F0 +// +#define GPIO_PF0_CAN1RX 0x00050001 +#define GPIO_PF0_PHB0 0x00050002 +#define GPIO_PF0_PWM0 0x00050003 +#define GPIO_PF0_I2S0TXSD 0x00050008 +#define GPIO_PF0_U1DSR 0x00050009 + +// +// GPIO pin F1 +// +#define GPIO_PF1_CAN1TX 0x00050401 +#define GPIO_PF1_IDX1 0x00050402 +#define GPIO_PF1_PWM1 0x00050403 +#define GPIO_PF1_I2S0TXMCLK 0x00050408 +#define GPIO_PF1_U1RTS 0x00050409 +#define GPIO_PF1_CCP3 0x0005040a + +// +// GPIO pin F2 +// +#define GPIO_PF2_LED1 0x00050801 +#define GPIO_PF2_PWM4 0x00050802 +#define GPIO_PF2_PWM2 0x00050804 +#define GPIO_PF2_SSI1CLK 0x00050809 + +// +// GPIO pin F3 +// +#define GPIO_PF3_LED0 0x00050c01 +#define GPIO_PF3_PWM5 0x00050c02 +#define GPIO_PF3_PWM3 0x00050c04 +#define GPIO_PF3_SSI1FSS 0x00050c09 + +// +// GPIO pin F4 +// +#define GPIO_PF4_CCP0 0x00051001 +#define GPIO_PF4_C0O 0x00051002 +#define GPIO_PF4_FAULT0 0x00051004 +#define GPIO_PF4_EPI0S12 0x00051008 +#define GPIO_PF4_SSI1RX 0x00051009 + +// +// GPIO pin F5 +// +#define GPIO_PF5_CCP2 0x00051401 +#define GPIO_PF5_C1O 0x00051402 +#define GPIO_PF5_EPI0S15 0x00051408 +#define GPIO_PF5_SSI1TX 0x00051409 + +// +// GPIO pin F6 +// +#define GPIO_PF6_CCP1 0x00051801 +#define GPIO_PF6_C2O 0x00051802 +#define GPIO_PF6_PHA0 0x00051804 +#define GPIO_PF6_I2S0TXMCLK 0x00051809 +#define GPIO_PF6_U1RTS 0x0005180a + +// +// GPIO pin F7 +// +#define GPIO_PF7_CCP4 0x00051c01 +#define GPIO_PF7_PHB0 0x00051c04 +#define GPIO_PF7_EPI0S12 0x00051c08 +#define GPIO_PF7_FAULT1 0x00051c09 + +// +// GPIO pin G0 +// +#define GPIO_PG0_U2RX 0x00060001 +#define GPIO_PG0_PWM0 0x00060002 +#define GPIO_PG0_I2C1SCL 0x00060003 +#define GPIO_PG0_PWM4 0x00060004 +#define GPIO_PG0_USB0EPEN 0x00060007 +#define GPIO_PG0_EPI0S13 0x00060008 + +// +// GPIO pin G1 +// +#define GPIO_PG1_U2TX 0x00060401 +#define GPIO_PG1_PWM1 0x00060402 +#define GPIO_PG1_I2C1SDA 0x00060403 +#define GPIO_PG1_PWM5 0x00060404 +#define GPIO_PG1_EPI0S14 0x00060408 + +// +// GPIO pin G2 +// +#define GPIO_PG2_PWM0 0x00060801 +#define GPIO_PG2_FAULT0 0x00060804 +#define GPIO_PG2_IDX1 0x00060808 +#define GPIO_PG2_I2S0RXSD 0x00060809 + +// +// GPIO pin G3 +// +#define GPIO_PG3_PWM1 0x00060c01 +#define GPIO_PG3_FAULT2 0x00060c04 +#define GPIO_PG3_FAULT0 0x00060c08 +#define GPIO_PG3_I2S0RXMCLK 0x00060c09 + +// +// GPIO pin G4 +// +#define GPIO_PG4_CCP3 0x00061001 +#define GPIO_PG4_FAULT1 0x00061004 +#define GPIO_PG4_EPI0S15 0x00061008 +#define GPIO_PG4_PWM6 0x00061009 +#define GPIO_PG4_U1RI 0x0006100a + +// +// GPIO pin G5 +// +#define GPIO_PG5_CCP5 0x00061401 +#define GPIO_PG5_IDX0 0x00061404 +#define GPIO_PG5_FAULT1 0x00061405 +#define GPIO_PG5_PWM7 0x00061408 +#define GPIO_PG5_I2S0RXSCK 0x00061409 +#define GPIO_PG5_U1DTR 0x0006140a + +// +// GPIO pin G6 +// +#define GPIO_PG6_PHA1 0x00061801 +#define GPIO_PG6_PWM6 0x00061804 +#define GPIO_PG6_FAULT1 0x00061808 +#define GPIO_PG6_I2S0RXWS 0x00061809 +#define GPIO_PG6_U1RI 0x0006180a + +// +// GPIO pin G7 +// +#define GPIO_PG7_PHB1 0x00061c01 +#define GPIO_PG7_PWM7 0x00061c04 +#define GPIO_PG7_CCP5 0x00061c08 +#define GPIO_PG7_EPI0S31 0x00061c09 + +// +// GPIO pin H0 +// +#define GPIO_PH0_CCP6 0x00070001 +#define GPIO_PH0_PWM2 0x00070002 +#define GPIO_PH0_EPI0S6 0x00070008 +#define GPIO_PH0_PWM4 0x00070009 + +// +// GPIO pin H1 +// +#define GPIO_PH1_CCP7 0x00070401 +#define GPIO_PH1_PWM3 0x00070402 +#define GPIO_PH1_EPI0S7 0x00070408 +#define GPIO_PH1_PWM5 0x00070409 + +// +// GPIO pin H2 +// +#define GPIO_PH2_IDX1 0x00070801 +#define GPIO_PH2_C1O 0x00070802 +#define GPIO_PH2_FAULT3 0x00070804 +#define GPIO_PH2_EPI0S1 0x00070808 + +// +// GPIO pin H3 +// +#define GPIO_PH3_PHB0 0x00070c01 +#define GPIO_PH3_FAULT0 0x00070c02 +#define GPIO_PH3_USB0EPEN 0x00070c04 +#define GPIO_PH3_EPI0S0 0x00070c08 + +// +// GPIO pin H4 +// +#define GPIO_PH4_USB0PFLT 0x00071004 +#define GPIO_PH4_EPI0S10 0x00071008 +#define GPIO_PH4_SSI1CLK 0x0007100b + +// +// GPIO pin H5 +// +#define GPIO_PH5_EPI0S11 0x00071408 +#define GPIO_PH5_FAULT2 0x0007140a +#define GPIO_PH5_SSI1FSS 0x0007140b + +// +// GPIO pin H6 +// +#define GPIO_PH6_EPI0S26 0x00071808 +#define GPIO_PH6_PWM4 0x0007180a +#define GPIO_PH6_SSI1RX 0x0007180b + +// +// GPIO pin H7 +// +#define GPIO_PH7_EPI0S27 0x00071c08 +#define GPIO_PH7_PWM5 0x00071c0a +#define GPIO_PH7_SSI1TX 0x00071c0b + +// +// GPIO pin J0 +// +#define GPIO_PJ0_EPI0S16 0x00080008 +#define GPIO_PJ0_PWM0 0x0008000a +#define GPIO_PJ0_I2C1SCL 0x0008000b + +// +// GPIO pin J1 +// +#define GPIO_PJ1_EPI0S17 0x00080408 +#define GPIO_PJ1_USB0PFLT 0x00080409 +#define GPIO_PJ1_PWM1 0x0008040a +#define GPIO_PJ1_I2C1SDA 0x0008040b + +// +// GPIO pin J2 +// +#define GPIO_PJ2_EPI0S18 0x00080808 +#define GPIO_PJ2_CCP0 0x00080809 +#define GPIO_PJ2_FAULT0 0x0008080a + +// +// GPIO pin J3 +// +#define GPIO_PJ3_EPI0S19 0x00080c08 +#define GPIO_PJ3_U1CTS 0x00080c09 +#define GPIO_PJ3_CCP6 0x00080c0a + +// +// GPIO pin J4 +// +#define GPIO_PJ4_EPI0S28 0x00081008 +#define GPIO_PJ4_U1DCD 0x00081009 +#define GPIO_PJ4_CCP4 0x0008100a + +// +// GPIO pin J5 +// +#define GPIO_PJ5_EPI0S29 0x00081408 +#define GPIO_PJ5_U1DSR 0x00081409 +#define GPIO_PJ5_CCP2 0x0008140a + +// +// GPIO pin J6 +// +#define GPIO_PJ6_EPI0S30 0x00081808 +#define GPIO_PJ6_U1RTS 0x00081809 +#define GPIO_PJ6_CCP1 0x0008180a + +// +// GPIO pin J7 +// +#define GPIO_PJ7_U1DTR 0x00081c09 +#define GPIO_PJ7_CCP0 0x00081c0a + +//***************************************************************************** +// +// Prototypes for the APIs. +// +//***************************************************************************** +extern void GPIODirModeSet(unsigned long ulPort, unsigned char ucPins, + unsigned long ulPinIO); +extern unsigned long GPIODirModeGet(unsigned long ulPort, unsigned char ucPin); +extern void GPIOIntTypeSet(unsigned long ulPort, unsigned char ucPins, + unsigned long ulIntType); +extern unsigned long GPIOIntTypeGet(unsigned long ulPort, unsigned char ucPin); +extern void GPIOPadConfigSet(unsigned long ulPort, unsigned char ucPins, + unsigned long ulStrength, + unsigned long ulPadType); +extern void GPIOPadConfigGet(unsigned long ulPort, unsigned char ucPin, + unsigned long *pulStrength, + unsigned long *pulPadType); +extern void GPIOPinIntEnable(unsigned long ulPort, unsigned char ucPins); +extern void GPIOPinIntDisable(unsigned long ulPort, unsigned char ucPins); +extern long GPIOPinIntStatus(unsigned long ulPort, tBoolean bMasked); +extern void GPIOPinIntClear(unsigned long ulPort, unsigned char ucPins); +extern void GPIOPortIntRegister(unsigned long ulPort, + void (*pfnIntHandler)(void)); +extern void GPIOPortIntUnregister(unsigned long ulPort); +extern long GPIOPinRead(unsigned long ulPort, unsigned char ucPins); +extern void GPIOPinWrite(unsigned long ulPort, unsigned char ucPins, + unsigned char ucVal); +extern void GPIOPinConfigure(unsigned long ulPinConfig); +extern void GPIOPinTypeADC(unsigned long ulPort, unsigned char ucPins); +extern void GPIOPinTypeCAN(unsigned long ulPort, unsigned char ucPins); +extern void GPIOPinTypeComparator(unsigned long ulPort, unsigned char ucPins); +extern void GPIOPinTypeEPI(unsigned long ulPort, unsigned char ucPins); +extern void GPIOPinTypeEthernetLED(unsigned long ulPort, unsigned char ucPins); +extern void GPIOPinTypeGPIOInput(unsigned long ulPort, unsigned char ucPins); +extern void GPIOPinTypeGPIOOutput(unsigned long ulPort, unsigned char ucPins); +extern void GPIOPinTypeGPIOOutputOD(unsigned long ulPort, + unsigned char ucPins); +extern void GPIOPinTypeI2C(unsigned long ulPort, unsigned char ucPins); +extern void GPIOPinTypeI2S(unsigned long ulPort, unsigned char ucPins); +extern void GPIOPinTypePWM(unsigned long ulPort, unsigned char ucPins); +extern void GPIOPinTypeQEI(unsigned long ulPort, unsigned char ucPins); +extern void GPIOPinTypeSSI(unsigned long ulPort, unsigned char ucPins); +extern void GPIOPinTypeTimer(unsigned long ulPort, unsigned char ucPins); +extern void GPIOPinTypeUART(unsigned long ulPort, unsigned char ucPins); +extern void GPIOPinTypeUSBAnalog(unsigned long ulPort, unsigned char ucPins); +extern void GPIOPinTypeUSBDigital(unsigned long ulPort, unsigned char ucPins); + +//***************************************************************************** +// +// Mark the end of the C bindings section for C++ compilers. +// +//***************************************************************************** +#ifdef __cplusplus +} +#endif + +#endif // __GPIO_H__ diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/hibernate.c b/bsp/lm3s_9b9x/Libraries/driverlib/hibernate.c new file mode 100644 index 0000000000000000000000000000000000000000..6e4c0517105b857314031b8c7a1e0f22fa78af13 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/hibernate.c @@ -0,0 +1,962 @@ +//***************************************************************************** +// +// hibernate.c - Driver for the Hibernation module +// +// Copyright (c) 2007-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +//***************************************************************************** +// +//! \addtogroup hibernate_api +//! @{ +// +//***************************************************************************** + +#include "inc/hw_hibernate.h" +#include "inc/hw_ints.h" +#include "inc/hw_sysctl.h" +#include "inc/hw_types.h" +#include "driverlib/debug.h" +#include "driverlib/hibernate.h" +#include "driverlib/interrupt.h" +#include "driverlib/sysctl.h" + +//***************************************************************************** +// +// The delay in microseconds for writing to the Hibernation module registers. +// +//***************************************************************************** +#define DELAY_USECS 95 + +//***************************************************************************** +// +// The number of processor cycles to execute one pass of the delay loop. +// +//***************************************************************************** +#define LOOP_CYCLES 3 + +//***************************************************************************** +// +// The calculated number of delay loops to achieve the write delay. +// +//***************************************************************************** +static unsigned long g_ulWriteDelay; + +//***************************************************************************** +// +//! \internal +//! +//! Polls until the write complete (WRC) bit in the hibernate control register +//! is set. +//! +//! \param None. +//! +//! On non-Fury-class devices, the hibernate module provides an indication when +//! any write is completed. This is used to pace writes to the module. This +//! function merely polls this bit and returns as soon as it is set. At this +//! point, it is safe to perform another write to the module. +//! +//! \return None. +// +//***************************************************************************** +void +HibernateWriteComplete(void) +{ + // + // Spin until the write complete bit is set. + // + while(!(HWREG(HIB_CTL) & HIB_CTL_WRC)) + { + } +} + +//***************************************************************************** +// +//! Enables the Hibernation module for operation. +//! +//! \param ulHibClk is the rate of the clock supplied to the Hibernation +//! module. +//! +//! Enables the Hibernation module for operation. This function should be +//! called before any of the Hibernation module features are used. +//! +//! The peripheral clock will be the same as the processor clock. This will be +//! the value returned by SysCtlClockGet(), or it can be explicitly hard-coded +//! if it is constant and known (to save the code/execution overhead of a call +//! to SysCtlClockGet()). +//! +//! This function replaces the original HibernateEnable() API and performs the +//! same actions. A macro is provided in hibernate.h to map the +//! original API to this API. +//! +//! \return None. +// +//***************************************************************************** +void +HibernateEnableExpClk(unsigned long ulHibClk) +{ + // + // Turn on the clock enable bit. + // + HWREG(HIB_CTL) |= HIB_CTL_CLK32EN; + + // + // For Fury-class devices, compute the number of delay loops that must be + // used to achieve the desired delay for writes to the hibernation + // registers. This value will be used in calls to SysCtlDelay(). + // + if(CLASS_IS_FURY) + { + g_ulWriteDelay = (((ulHibClk / 1000) * DELAY_USECS) / + (1000L * LOOP_CYCLES)); + g_ulWriteDelay++; + } +} + +//***************************************************************************** +// +//! Disables the Hibernation module for operation. +//! +//! Disables the Hibernation module for operation. After this function is +//! called, none of the Hibernation module features are available. +//! +//! \return None. +// +//***************************************************************************** +void +HibernateDisable(void) +{ + // + // Turn off the clock enable bit. + // + HWREG(HIB_CTL) &= ~HIB_CTL_CLK32EN; +} + +//***************************************************************************** +// +//! Selects the clock input for the Hibernation module. +//! +//! \param ulClockInput specifies the clock input. +//! +//! Configures the clock input for the Hibernation module. The configuration +//! option chosen depends entirely on hardware design. The clock input for the +//! module will either be a 32.768 kHz oscillator or a 4.194304 MHz crystal. +//! The \e ulClockFlags parameter must be one of the following: +//! +//! - \b HIBERNATE_CLOCK_SEL_RAW - use the raw signal from a 32.768 kHz +//! oscillator. +//! - \b HIBERNATE_CLOCK_SEL_DIV128 - use the crystal input, divided by 128. +//! +//! \return None. +// +//***************************************************************************** +void +HibernateClockSelect(unsigned long ulClockInput) +{ + // + // Check the arguments. + // + ASSERT((ulClockInput == HIBERNATE_CLOCK_SEL_RAW) || + (ulClockInput == HIBERNATE_CLOCK_SEL_DIV128)); + + // + // Set the clock selection bit according to the parameter. + // + HWREG(HIB_CTL) = ulClockInput | (HWREG(HIB_CTL) & ~HIB_CTL_CLKSEL); +} + +//***************************************************************************** +// +//! Enables the RTC feature of the Hibernation module. +//! +//! Enables the RTC in the Hibernation module. The RTC can be used to wake the +//! processor from hibernation at a certain time, or to generate interrupts at +//! certain times. This function must be called before using any of the RTC +//! features of the Hibernation module. +//! +//! \return None. +// +//***************************************************************************** +void +HibernateRTCEnable(void) +{ + // + // Turn on the RTC enable bit. + // + HWREG(HIB_CTL) |= HIB_CTL_RTCEN; +} + +//***************************************************************************** +// +//! Disables the RTC feature of the Hibernation module. +//! +//! Disables the RTC in the Hibernation module. After calling this function +//! the RTC features of the Hibernation module will not be available. +//! +//! \return None. +// +//***************************************************************************** +void +HibernateRTCDisable(void) +{ + // + // Turn off the RTC enable bit. + // + HWREG(HIB_CTL) &= ~HIB_CTL_RTCEN; +} + +//***************************************************************************** +// +//! Configures the wake conditions for the Hibernation module. +//! +//! \param ulWakeFlags specifies which conditions should be used for waking. +//! +//! Enables the conditions under which the Hibernation module will wake. The +//! \e ulWakeFlags parameter is the logical OR of any combination of the +//! following: +//! +//! - \b HIBERNATE_WAKE_PIN - wake when the external wake pin is asserted. +//! - \b HIBERNATE_WAKE_RTC - wake when one of the RTC matches occurs. +//! +//! \return None. +// +//***************************************************************************** +void +HibernateWakeSet(unsigned long ulWakeFlags) +{ + // + // Check the arguments. + // + ASSERT(!(ulWakeFlags & ~(HIBERNATE_WAKE_PIN | HIBERNATE_WAKE_RTC))); + + // + // Set the specified wake flags in the control register. + // + HWREG(HIB_CTL) = (ulWakeFlags | + (HWREG(HIB_CTL) & + ~(HIBERNATE_WAKE_PIN | HIBERNATE_WAKE_RTC))); +} + +//***************************************************************************** +// +//! Gets the currently configured wake conditions for the Hibernation module. +//! +//! Returns the flags representing the wake configuration for the Hibernation +//! module. The return value will be a combination of the following flags: +//! +//! - \b HIBERNATE_WAKE_PIN - wake when the external wake pin is asserted. +//! - \b HIBERNATE_WAKE_RTC - wake when one of the RTC matches occurs. +//! +//! \return Returns flags indicating the configured wake conditions. +// +//***************************************************************************** +unsigned long +HibernateWakeGet(void) +{ + // + // Read the wake bits from the control register and return + // those bits to the caller. + // + return(HWREG(HIB_CTL) & (HIBERNATE_WAKE_PIN | HIBERNATE_WAKE_RTC)); +} + +//***************************************************************************** +// +//! Configures the low battery detection. +//! +//! \param ulLowBatFlags specifies behavior of low battery detection. +//! +//! Enables the low battery detection and whether hibernation is allowed if a +//! low battery is detected. If low battery detection is enabled, then a low +//! battery condition will be indicated in the raw interrupt status register, +//! and can also trigger an interrupt. Optionally, hibernation can be aborted +//! if a low battery is detected. +//! +//! The \e ulLowBatFlags parameter is one of the following values: +//! +//! - \b HIBERNATE_LOW_BAT_DETECT - detect a low battery condition. +//! - \b HIBERNATE_LOW_BAT_ABORT - detect a low battery condition, and abort +//! hibernation if low battery is detected. +//! +//! \return None. +// +//***************************************************************************** +void +HibernateLowBatSet(unsigned long ulLowBatFlags) +{ + // + // Check the arguments. + // + ASSERT((ulLowBatFlags == HIBERNATE_LOW_BAT_DETECT) || + (ulLowBatFlags == HIBERNATE_LOW_BAT_ABORT)); + + // + // Set the low battery detect and abort bits in the control register, + // according to the parameter. + // + HWREG(HIB_CTL) = (ulLowBatFlags | + (HWREG(HIB_CTL) & ~HIBERNATE_LOW_BAT_ABORT)); +} + +//***************************************************************************** +// +//! Gets the currently configured low battery detection behavior. +//! +//! Returns a value representing the currently configured low battery detection +//! behavior. The return value will be one of the following: +//! +//! - \b HIBERNATE_LOW_BAT_DETECT - detect a low battery condition. +//! - \b HIBERNATE_LOW_BAT_ABORT - detect a low battery condition, and abort +//! hibernation if low battery is detected. +//! +//! \return Returns a value indicating the configured low battery detection. +// +//***************************************************************************** +unsigned long +HibernateLowBatGet(void) +{ + // + // Read the low bat bits from the control register and return those bits to + // the caller. + // + return(HWREG(HIB_CTL) & HIBERNATE_LOW_BAT_ABORT); +} + +//***************************************************************************** +// +//! Sets the value of the real time clock (RTC) counter. +//! +//! \param ulRTCValue is the new value for the RTC. +//! +//! Sets the value of the RTC. The RTC will count seconds if the hardware is +//! configured correctly. The RTC must be enabled by calling +//! HibernateRTCEnable() before calling this function. +//! +//! \return None. +// +//***************************************************************************** +void +HibernateRTCSet(unsigned long ulRTCValue) +{ + // + // Write the new RTC value to the RTC load register. + // + HWREG(HIB_RTCLD) = ulRTCValue; + + // + // Add a delay here to enforce the required delay between write accesses to + // certain Hibernation module registers. + // + if(CLASS_IS_FURY) + { + // + // Delay a fixed time on Fury-class devices + // + SysCtlDelay(g_ulWriteDelay); + } + else + { + // + // Wait for write complete to be signaled on later devices. + // + HibernateWriteComplete(); + } +} + +//***************************************************************************** +// +//! Gets the value of the real time clock (RTC) counter. +//! +//! Gets the value of the RTC and returns it to the caller. +//! +//! \return Returns the value of the RTC. +// +//***************************************************************************** +unsigned long +HibernateRTCGet(void) +{ + // + // Return the value of the RTC counter register to the caller. + // + return(HWREG(HIB_RTCC)); +} + +//***************************************************************************** +// +//! Sets the value of the RTC match 0 register. +//! +//! \param ulMatch is the value for the match register. +//! +//! Sets the match 0 register for the RTC. The Hibernation module can be +//! configured to wake from hibernation, and/or generate an interrupt when the +//! value of the RTC counter is the same as the match register. +//! +//! \return None. +// +//***************************************************************************** +void +HibernateRTCMatch0Set(unsigned long ulMatch) +{ + // + // Write the new match value to the match register. + // + HWREG(HIB_RTCM0) = ulMatch; + + // + // Add a delay here to enforce the required delay between write accesses to + // certain Hibernation module registers. + // + if(CLASS_IS_FURY) + { + // + // Delay a fixed time on Fury-class devices + // + SysCtlDelay(g_ulWriteDelay); + } + else + { + // + // Wait for write complete to be signaled on later devices. + // + HibernateWriteComplete(); + } +} + +//***************************************************************************** +// +//! Gets the value of the RTC match 0 register. +//! +//! Gets the value of the match 0 register for the RTC. +//! +//! \return Returns the value of the match register. +// +//***************************************************************************** +unsigned long +HibernateRTCMatch0Get(void) +{ + // + // Return the value of the match register to the caller. + // + return(HWREG(HIB_RTCM0)); +} + +//***************************************************************************** +// +//! Sets the value of the RTC match 1 register. +//! +//! \param ulMatch is the value for the match register. +//! +//! Sets the match 1 register for the RTC. The Hibernation module can be +//! configured to wake from hibernation, and/or generate an interrupt when the +//! value of the RTC counter is the same as the match register. +//! +//! \return None. +// +//***************************************************************************** +void +HibernateRTCMatch1Set(unsigned long ulMatch) +{ + // + // Write the new match value to the match register. + // + HWREG(HIB_RTCM1) = ulMatch; + + // + // Add a delay here to enforce the required delay between write accesses to + // certain Hibernation module registers. + // + if(CLASS_IS_FURY) + { + // + // Delay a fixed time on Fury-class devices + // + SysCtlDelay(g_ulWriteDelay); + } + else + { + // + // Wait for write complete to be signaled on later devices. + // + HibernateWriteComplete(); + } +} + +//***************************************************************************** +// +//! Gets the value of the RTC match 1 register. +//! +//! Gets the value of the match 1 register for the RTC. +//! +//! \return Returns the value of the match register. +// +//***************************************************************************** +unsigned long +HibernateRTCMatch1Get(void) +{ + // + // Return the value of the match register to the caller. + // + return(HWREG(HIB_RTCM1)); +} + +//***************************************************************************** +// +//! Sets the value of the RTC predivider trim register. +//! +//! \param ulTrim is the new value for the pre-divider trim register. +//! +//! Sets the value of the pre-divider trim register. The input time source is +//! divided by the pre-divider to achieve a one-second clock rate. Once every +//! 64 seconds, the value of the pre-divider trim register is applied to the +//! predivider to allow fine-tuning of the RTC rate, in order to make +//! corrections to the rate. The software application can make adjustments to +//! the predivider trim register to account for variations in the accuracy of +//! the input time source. The nominal value is 0x7FFF, and it can be adjusted +//! up or down in order to fine-tune the RTC rate. +//! +//! \return None. +// +//***************************************************************************** +void +HibernateRTCTrimSet(unsigned long ulTrim) +{ + // + // Check the arguments. + // + ASSERT(ulTrim < 0x10000); + + // + // Write the new trim value to the trim register. + // + HWREG(HIB_RTCT) = ulTrim; + + // + // Add a delay here to enforce the required delay between write accesses to + // certain Hibernation module registers. + // + if(CLASS_IS_FURY) + { + // + // Delay a fixed time on Fury-class devices + // + SysCtlDelay(g_ulWriteDelay); + } + else + { + // + // Wait for write complete to be signaled on later devices. + // + HibernateWriteComplete(); + } +} + +//***************************************************************************** +// +//! Gets the value of the RTC predivider trim register. +//! +//! Gets the value of the pre-divider trim register. This function can be used +//! to get the current value of the trim register prior to making an adjustment +//! by using the HibernateRTCTrimSet() function. +//! +//! \return None. +// +//***************************************************************************** +unsigned long +HibernateRTCTrimGet(void) +{ + // + // Return the value of the trim register to the caller. + // + return(HWREG(HIB_RTCT)); +} + +//***************************************************************************** +// +//! Stores data in the non-volatile memory of the Hibernation module. +//! +//! \param pulData points to the data that the caller wants to store in the +//! memory of the Hibernation module. +//! \param ulCount is the count of 32-bit words to store. +//! +//! Stores a set of data in the Hibernation module non-volatile memory. This +//! memory will be preserved when the power to the processor is turned off, and +//! can be used to store application state information which will be available +//! when the processor wakes. Up to 64 32-bit words can be stored in the +//! non-volatile memory. The data can be restored by calling the +//! HibernateDataGet() function. +//! +//! \return None. +// +//***************************************************************************** +void +HibernateDataSet(unsigned long *pulData, unsigned long ulCount) +{ + unsigned int uIdx; + + // + // Check the arguments. + // + ASSERT(ulCount <= 64); + ASSERT(pulData != 0); + + // + // Loop through all the words to be stored, storing one at a time. + // + for(uIdx = 0; uIdx < ulCount; uIdx++) + { + // + // Write a word to the non-volatile storage area. + // + HWREG(HIB_DATA + (uIdx * 4)) = pulData[uIdx]; + + // + // Add a delay between writes to the data area. + // + if(CLASS_IS_FURY) + { + // + // Delay a fixed time on Fury-class devices + // + SysCtlDelay(g_ulWriteDelay); + } + else + { + // + // Wait for write complete to be signaled on later devices. + // + HibernateWriteComplete(); + } + } +} + +//***************************************************************************** +// +//! Reads a set of data from the non-volatile memory of the Hibernation module. +//! +//! \param pulData points to a location where the data that is read from the +//! Hibernation module will be stored. +//! \param ulCount is the count of 32-bit words to read. +//! +//! Retrieves a set of data from the Hibernation module non-volatile memory +//! that was previously stored with the HibernateDataSet() function. The +//! caller must ensure that \e pulData points to a large enough memory block to +//! hold all the data that is read from the non-volatile memory. +//! +//! \return None. +// +//***************************************************************************** +void +HibernateDataGet(unsigned long *pulData, unsigned long ulCount) +{ + unsigned int uIdx; + + // + // Check the arguments. + // + ASSERT(ulCount <= 64); + ASSERT(pulData != 0); + + // + // Loop through all the words to be restored, reading one at a time. + // + for(uIdx = 0; uIdx < ulCount; uIdx++) + { + // + // Read a word from the non-volatile storage area. No delay is + // required between reads. + // + pulData[uIdx] = HWREG(HIB_DATA + (uIdx * 4)); + } +} + +//***************************************************************************** +// +//! Requests hibernation mode. +//! +//! This function requests the Hibernation module to disable the external +//! regulator, thus removing power from the processor and all peripherals. The +//! Hibernation module will remain powered from the battery or auxiliary power +//! supply. +//! +//! The Hibernation module will re-enable the external regulator when one of +//! the configured wake conditions occurs (such as RTC match or external +//! \b WAKE pin). When the power is restored the processor will go through a +//! normal power-on reset. The processor can retrieve saved state information +//! with the HibernateDataGet() function. Prior to calling the function to +//! request hibernation mode, the conditions for waking must have already been +//! set by using the HibernateWakeSet() function. +//! +//! Note that this function may return because some time may elapse before the +//! power is actually removed, or it may not be removed at all. For this +//! reason, the processor will continue to execute instructions for some time +//! and the caller should be prepared for this function to return. There are +//! various reasons why the power may not be removed. For example, if the +//! HibernateLowBatSet() function was used to configure an abort if low +//! battery is detected, then the power will not be removed if the battery +//! voltage is too low. There may be other reasons, related to the external +//! circuit design, that a request for hibernation may not actually occur. +//! +//! For all these reasons, the caller must be prepared for this function to +//! return. The simplest way to handle it is to just enter an infinite loop +//! and wait for the power to be removed. +//! +//! \return None. +// +//***************************************************************************** +void +HibernateRequest(void) +{ + // + // Set the bit in the control register to cut main power to the processor. + // + HWREG(HIB_CTL) |= HIB_CTL_HIBREQ; +} + +//***************************************************************************** +// +//! Enables interrupts for the Hibernation module. +//! +//! \param ulIntFlags is the bit mask of the interrupts to be enabled. +//! +//! Enables the specified interrupt sources from the Hibernation module. +//! +//! The \e ulIntFlags parameter must be the logical OR of any combination of +//! the following: +//! +//! - \b HIBERNATE_INT_PIN_WAKE - wake from pin interrupt +//! - \b HIBERNATE_INT_LOW_BAT - low battery interrupt +//! - \b HIBERNATE_INT_RTC_MATCH_0 - RTC match 0 interrupt +//! - \b HIBERNATE_INT_RTC_MATCH_1 - RTC match 1 interrupt +//! +//! \return None. +// +//***************************************************************************** +void +HibernateIntEnable(unsigned long ulIntFlags) +{ + // + // Check the arguments. + // + ASSERT(!(ulIntFlags & ~(HIBERNATE_INT_PIN_WAKE | HIBERNATE_INT_LOW_BAT | + HIBERNATE_INT_RTC_MATCH_0 | + HIBERNATE_INT_RTC_MATCH_1))); + + // + // Set the specified interrupt mask bits. + // + HWREG(HIB_IM) |= ulIntFlags; +} + +//***************************************************************************** +// +//! Disables interrupts for the Hibernation module. +//! +//! \param ulIntFlags is the bit mask of the interrupts to be disabled. +//! +//! Disables the specified interrupt sources from the Hibernation module. +//! +//! The \e ulIntFlags parameter has the same definition as the \e ulIntFlags +//! parameter to the HibernateIntEnable() function. +//! +//! \return None. +// +//***************************************************************************** +void +HibernateIntDisable(unsigned long ulIntFlags) +{ + // + // Check the arguments. + // + ASSERT(!(ulIntFlags & ~(HIBERNATE_INT_PIN_WAKE | HIBERNATE_INT_LOW_BAT | + HIBERNATE_INT_RTC_MATCH_0 | + HIBERNATE_INT_RTC_MATCH_1))); + + // + // Clear the specified interrupt mask bits. + // + HWREG(HIB_IM) &= ~ulIntFlags; +} + +//***************************************************************************** +// +//! Registers an interrupt handler for the Hibernation module interrupt. +//! +//! \param pfnHandler points to the function to be called when a hibernation +//! interrupt occurs. +//! +//! Registers the interrupt handler in the system interrupt controller. The +//! interrupt is enabled at the global level, but individual interrupt sources +//! must still be enabled with a call to HibernateIntEnable(). +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +HibernateIntRegister(void (*pfnHandler)(void)) +{ + // + // Register the interrupt handler. + // + IntRegister(INT_HIBERNATE, pfnHandler); + + // + // Enable the hibernate module interrupt. + // + IntEnable(INT_HIBERNATE); +} + +//***************************************************************************** +// +//! Unregisters an interrupt handler for the Hibernation module interrupt. +//! +//! Unregisters the interrupt handler in the system interrupt controller. The +//! interrupt is disabled at the global level, and the interrupt handler will +//! no longer be called. +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +HibernateIntUnregister(void) +{ + // + // Disable the hibernate interrupt. + // + IntDisable(INT_HIBERNATE); + + // + // Unregister the interrupt handler. + // + IntUnregister(INT_HIBERNATE); +} + +//***************************************************************************** +// +//! Gets the current interrupt status of the Hibernation module. +//! +//! \param bMasked is false to retrieve the raw interrupt status, and true to +//! retrieve the masked interrupt status. +//! +//! Returns the interrupt status of the Hibernation module. The caller can use +//! this to determine the cause of a hibernation interrupt. Either the masked +//! or raw interrupt status can be returned. +//! +//! \return Returns the interrupt status as a bit field with the values as +//! described in the HibernateIntEnable() function. +// +//***************************************************************************** +unsigned long +HibernateIntStatus(tBoolean bMasked) +{ + // + // Read and return the Hibernation module raw or masked interrupt status. + // + if(bMasked == true) + { + return(HWREG(HIB_MIS) & 0xf); + } + else + { + return(HWREG(HIB_RIS) & 0xf); + } +} + +//***************************************************************************** +// +//! Clears pending interrupts from the Hibernation module. +//! +//! \param ulIntFlags is the bit mask of the interrupts to be cleared. +//! +//! Clears the specified interrupt sources. This must be done from within the +//! interrupt handler or else the handler will be called again upon exit. +//! +//! The \e ulIntFlags parameter has the same definition as the \e ulIntFlags +//! parameter to the HibernateIntEnable() function. +//! +//! \note Since there is a write buffer in the Cortex-M3 processor, it may take +//! several clock cycles before the interrupt source is actually cleared. +//! Therefore, it is recommended that the interrupt source be cleared early in +//! the interrupt handler (as opposed to the very last action) to avoid +//! returning from the interrupt handler before the interrupt source is +//! actually cleared. Failure to do so may result in the interrupt handler +//! being immediately reentered (since NVIC still sees the interrupt source +//! asserted). +//! +//! \return None. +// +//***************************************************************************** +void +HibernateIntClear(unsigned long ulIntFlags) +{ + // + // Check the arguments. + // + ASSERT(!(ulIntFlags & ~(HIBERNATE_INT_PIN_WAKE | HIBERNATE_INT_LOW_BAT | + HIBERNATE_INT_RTC_MATCH_0 | + HIBERNATE_INT_RTC_MATCH_1))); + + // + // Write the specified interrupt bits into the interrupt clear register. + // + HWREG(HIB_IC) |= ulIntFlags; +} + +//***************************************************************************** +// +//! Checks to see if the Hibernation module is already powered up. +//! +//! This function queries the control register to determine if the module is +//! already active. This function can be called at a power-on reset to help +//! determine if the reset is due to a wake from hibernation or a cold start. +//! If the Hibernation module is already active, then it does not need to be +//! re-enabled and its status can be queried immediately. +//! +//! The software application should also use the HibernateIntStatus() function +//! to read the raw interrupt status to determine the cause of the wake. The +//! HibernateDataGet() function can be used to restore state. These +//! combinations of functions can be used by the software to determine if the +//! processor is waking from hibernation and the appropriate action to take as +//! a result. +//! +//! \return Returns \b true if the module is already active, and \b false if +//! not. +// +//***************************************************************************** +unsigned int +HibernateIsActive(void) +{ + // + // Read the control register, and return true if the module is enabled. + // + return(HWREG(HIB_CTL) & HIB_CTL_CLK32EN ? 1 : 0); +} + +//***************************************************************************** +// +// Close the Doxygen group. +//! @} +// +//***************************************************************************** diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/hibernate.h b/bsp/lm3s_9b9x/Libraries/driverlib/hibernate.h new file mode 100644 index 0000000000000000000000000000000000000000..02f54a0f7ba3396ab9d2298d0b580e94417f9191 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/hibernate.h @@ -0,0 +1,127 @@ +//***************************************************************************** +// +// hibernate.h - API definition for the Hibernation module. +// +// Copyright (c) 2007-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +#ifndef __HIBERNATE_H__ +#define __HIBERNATE_H__ + +//***************************************************************************** +// +// If building with a C++ compiler, make all of the definitions in this header +// have a C binding. +// +//***************************************************************************** +#ifdef __cplusplus +extern "C" +{ +#endif + +//***************************************************************************** +// +// Macros needed for selecting the clock source for HibernateClockSelect() +// +//***************************************************************************** +#define HIBERNATE_CLOCK_SEL_RAW 0x04 +#define HIBERNATE_CLOCK_SEL_DIV128 0x00 + +//***************************************************************************** +// +// Macros need to configure wake events for HibernateWakeSet() +// +//***************************************************************************** +#define HIBERNATE_WAKE_PIN 0x10 +#define HIBERNATE_WAKE_RTC 0x08 + +//***************************************************************************** +// +// Macros needed to configure low battery detect for HibernateLowBatSet() +// +//***************************************************************************** +#define HIBERNATE_LOW_BAT_DETECT 0x20 +#define HIBERNATE_LOW_BAT_ABORT 0xA0 + +//***************************************************************************** +// +// Macros defining interrupt source bits for the interrupt functions. +// +//***************************************************************************** +#define HIBERNATE_INT_PIN_WAKE 0x08 +#define HIBERNATE_INT_LOW_BAT 0x04 +#define HIBERNATE_INT_RTC_MATCH_0 0x01 +#define HIBERNATE_INT_RTC_MATCH_1 0x02 + +//***************************************************************************** +// +// API Function prototypes +// +//***************************************************************************** +extern void HibernateEnableExpClk(unsigned long ulHibClk); +extern void HibernateDisable(void); +extern void HibernateClockSelect(unsigned long ulClockInput); +extern void HibernateRTCEnable(void); +extern void HibernateRTCDisable(void); +extern void HibernateWakeSet(unsigned long ulWakeFlags); +extern unsigned long HibernateWakeGet(void); +extern void HibernateLowBatSet(unsigned long ulLowBatFlags); +extern unsigned long HibernateLowBatGet(void); +extern void HibernateRTCSet(unsigned long ulRTCValue); +extern unsigned long HibernateRTCGet(void); +extern void HibernateRTCMatch0Set(unsigned long ulMatch); +extern unsigned long HibernateRTCMatch0Get(void); +extern void HibernateRTCMatch1Set(unsigned long ulMatch); +extern unsigned long HibernateRTCMatch1Get(void); +extern void HibernateRTCTrimSet(unsigned long ulTrim); +extern unsigned long HibernateRTCTrimGet(void); +extern void HibernateDataSet(unsigned long *pulData, unsigned long ulCount); +extern void HibernateDataGet(unsigned long *pulData, unsigned long ulCount); +extern void HibernateRequest(void); +extern void HibernateIntEnable(unsigned long ulIntFlags); +extern void HibernateIntDisable(unsigned long ulIntFlags); +extern void HibernateIntRegister(void (*pfnHandler)(void)); +extern void HibernateIntUnregister(void); +extern unsigned long HibernateIntStatus(tBoolean bMasked); +extern void HibernateIntClear(unsigned long ulIntFlags); +extern unsigned int HibernateIsActive(void); + +//***************************************************************************** +// +// Several Hibernate module APIs have been renamed, with the original function +// name being deprecated. These defines provide backward compatibility. +// +//***************************************************************************** +#ifndef DEPRECATED +#include "driverlib/sysctl.h" +#define HibernateEnable(a) \ + HibernateEnableExpClk(a, SysCtlClockGet()) +#endif + +//***************************************************************************** +// +// Mark the end of the C bindings section for C++ compilers. +// +//***************************************************************************** +#ifdef __cplusplus +} +#endif + +#endif // __HIBERNATE_H__ diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/i2c.c b/bsp/lm3s_9b9x/Libraries/driverlib/i2c.c new file mode 100644 index 0000000000000000000000000000000000000000..b47148c34df8ccc4a35da8b0859dad170b21230b --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/i2c.c @@ -0,0 +1,1106 @@ +//***************************************************************************** +// +// i2c.c - Driver for Inter-IC (I2C) bus block. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +//***************************************************************************** +// +//! \addtogroup i2c_api +//! @{ +// +//***************************************************************************** + +#include "inc/hw_i2c.h" +#include "inc/hw_ints.h" +#include "inc/hw_memmap.h" +#include "inc/hw_sysctl.h" +#include "inc/hw_types.h" +#include "driverlib/debug.h" +#include "driverlib/i2c.h" +#include "driverlib/interrupt.h" + +//***************************************************************************** +// +//! Initializes the I2C Master block. +//! +//! \param ulBase is the base address of the I2C Master module. +//! \param ulI2CClk is the rate of the clock supplied to the I2C module. +//! \param bFast set up for fast data transfers +//! +//! This function initializes operation of the I2C Master block. Upon +//! successful initialization of the I2C block, this function will have set the +//! bus speed for the master, and will have enabled the I2C Master block. +//! +//! If the parameter \e bFast is \b true, then the master block will be set up +//! to transfer data at 400 kbps; otherwise, it will be set up to transfer data +//! at 100 kbps. +//! +//! The peripheral clock will be the same as the processor clock. This will be +//! the value returned by SysCtlClockGet(), or it can be explicitly hard coded +//! if it is constant and known (to save the code/execution overhead of a call +//! to SysCtlClockGet()). +//! +//! This function replaces the original I2CMasterInit() API and performs the +//! same actions. A macro is provided in i2c.h to map the original +//! API to this API. +//! +//! \return None. +// +//***************************************************************************** +void +I2CMasterInitExpClk(unsigned long ulBase, unsigned long ulI2CClk, + tBoolean bFast) +{ + unsigned long ulSCLFreq; + unsigned long ulTPR; + + // + // Check the arguments. + // + ASSERT((ulBase == I2C0_MASTER_BASE) || (ulBase == I2C1_MASTER_BASE)); + + // + // Must enable the device before doing anything else. + // + I2CMasterEnable(ulBase); + + // + // Get the desired SCL speed. + // + if(bFast == true) + { + ulSCLFreq = 400000; + } + else + { + ulSCLFreq = 100000; + } + + // + // Compute the clock divider that achieves the fastest speed less than or + // equal to the desired speed. The numerator is biased to favor a larger + // clock divider so that the resulting clock is always less than or equal + // to the desired clock, never greater. + // + ulTPR = ((ulI2CClk + (2 * 10 * ulSCLFreq) - 1) / (2 * 10 * ulSCLFreq)) - 1; + HWREG(ulBase + I2C_O_MTPR) = ulTPR; +} + +//***************************************************************************** +// +//! Initializes the I2C Slave block. +//! +//! \param ulBase is the base address of the I2C Slave module. +//! \param ucSlaveAddr 7-bit slave address +//! +//! This function initializes operation of the I2C Slave block. Upon +//! successful initialization of the I2C blocks, this function will have set +//! the slave address and have enabled the I2C Slave block. +//! +//! The parameter \e ucSlaveAddr is the value that will be compared against the +//! slave address sent by an I2C master. +//! +//! \return None. +// +//***************************************************************************** +void +I2CSlaveInit(unsigned long ulBase, unsigned char ucSlaveAddr) +{ + // + // Check the arguments. + // + ASSERT((ulBase == I2C0_SLAVE_BASE) || (ulBase == I2C1_SLAVE_BASE)); + ASSERT(!(ucSlaveAddr & 0x80)); + + // + // Must enable the device before doing anything else. + // + I2CSlaveEnable(ulBase); + + // + // Set up the slave address. + // + HWREG(ulBase + I2C_O_SOAR) = ucSlaveAddr; +} + +//***************************************************************************** +// +//! Enables the I2C Master block. +//! +//! \param ulBase is the base address of the I2C Master module. +//! +//! This will enable operation of the I2C Master block. +//! +//! \return None. +// +//***************************************************************************** +void +I2CMasterEnable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == I2C0_MASTER_BASE) || (ulBase == I2C1_MASTER_BASE)); + + // + // Enable the master block. + // + HWREG(ulBase + I2C_O_MCR) |= I2C_MCR_MFE; +} + +//***************************************************************************** +// +//! Enables the I2C Slave block. +//! +//! \param ulBase is the base address of the I2C Slave module. +//! +//! This will enable operation of the I2C Slave block. +//! +//! \return None. +// +//***************************************************************************** +void +I2CSlaveEnable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == I2C0_SLAVE_BASE) || (ulBase == I2C1_SLAVE_BASE)); + + // + // Enable the clock to the slave block. + // + HWREG(ulBase - I2C0_SLAVE_BASE + I2C0_MASTER_BASE + I2C_O_MCR) |= + I2C_MCR_SFE; + + // + // Enable the slave. + // + HWREG(ulBase + I2C_O_SCSR) = I2C_SCSR_DA; +} + +//***************************************************************************** +// +//! Disables the I2C master block. +//! +//! \param ulBase is the base address of the I2C Master module. +//! +//! This will disable operation of the I2C master block. +//! +//! \return None. +// +//***************************************************************************** +void +I2CMasterDisable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == I2C0_MASTER_BASE) || (ulBase == I2C1_MASTER_BASE)); + + // + // Disable the master block. + // + HWREG(ulBase + I2C_O_MCR) &= ~(I2C_MCR_MFE); +} + +//***************************************************************************** +// +//! Disables the I2C slave block. +//! +//! \param ulBase is the base address of the I2C Slave module. +//! +//! This will disable operation of the I2C slave block. +//! +//! \return None. +// +//***************************************************************************** +void +I2CSlaveDisable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == I2C0_SLAVE_BASE) || (ulBase == I2C1_SLAVE_BASE)); + + // + // Disable the slave. + // + HWREG(ulBase + I2C_O_SCSR) = 0; + + // + // Disable the clock to the slave block. + // + HWREG(ulBase - I2C0_SLAVE_BASE + I2C0_MASTER_BASE + I2C_O_MCR) &= + ~(I2C_MCR_SFE); +} + +//***************************************************************************** +// +//! Registers an interrupt handler for the I2C module. +//! +//! \param ulBase is the base address of the I2C Master module. +//! \param pfnHandler is a pointer to the function to be called when the +//! I2C interrupt occurs. +//! +//! This sets the handler to be called when an I2C interrupt occurs. This will +//! enable the global interrupt in the interrupt controller; specific I2C +//! interrupts must be enabled via I2CMasterIntEnable() and +//! I2CSlaveIntEnable(). If necessary, it is the interrupt handler's +//! responsibility to clear the interrupt source via I2CMasterIntClear() and +//! I2CSlaveIntClear(). +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +I2CIntRegister(unsigned long ulBase, void (*pfnHandler)(void)) +{ + unsigned long ulInt; + + // + // Check the arguments. + // + ASSERT((ulBase == I2C0_MASTER_BASE) || (ulBase == I2C1_MASTER_BASE)); + + // + // Determine the interrupt number based on the I2C port. + // + ulInt = (ulBase == I2C0_MASTER_BASE) ? INT_I2C0 : INT_I2C1; + + // + // Register the interrupt handler, returning an error if an error occurs. + // + IntRegister(ulInt, pfnHandler); + + // + // Enable the I2C interrupt. + // + IntEnable(ulInt); +} + +//***************************************************************************** +// +//! Unregisters an interrupt handler for the I2C module. +//! +//! \param ulBase is the base address of the I2C Master module. +//! +//! This function will clear the handler to be called when an I2C interrupt +//! occurs. This will also mask off the interrupt in the interrupt controller +//! so that the interrupt handler no longer is called. +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +I2CIntUnregister(unsigned long ulBase) +{ + unsigned long ulInt; + + // + // Check the arguments. + // + ASSERT((ulBase == I2C0_MASTER_BASE) || (ulBase == I2C1_MASTER_BASE)); + + // + // Determine the interrupt number based on the I2C port. + // + ulInt = (ulBase == I2C0_MASTER_BASE) ? INT_I2C0 : INT_I2C1; + + // + // Disable the interrupt. + // + IntDisable(ulInt); + + // + // Unregister the interrupt handler. + // + IntUnregister(ulInt); +} + +//***************************************************************************** +// +//! Enables the I2C Master interrupt. +//! +//! \param ulBase is the base address of the I2C Master module. +//! +//! Enables the I2C Master interrupt source. +//! +//! \return None. +// +//***************************************************************************** +void +I2CMasterIntEnable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == I2C0_MASTER_BASE) || (ulBase == I2C1_MASTER_BASE)); + + // + // Enable the master interrupt. + // + HWREG(ulBase + I2C_O_MIMR) = 1; +} + +//***************************************************************************** +// +//! Enables the I2C Slave interrupt. +//! +//! \param ulBase is the base address of the I2C Slave module. +//! +//! Enables the I2C Slave interrupt source. +//! +//! \return None. +// +//***************************************************************************** +void +I2CSlaveIntEnable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == I2C0_SLAVE_BASE) || (ulBase == I2C1_SLAVE_BASE)); + + // + // Enable the slave interrupt. + // + HWREG(ulBase + I2C_O_SIMR) |= I2C_SLAVE_INT_DATA; +} + +//***************************************************************************** +// +//! Enables individual I2C Slave interrupt sources. +//! +//! \param ulBase is the base address of the I2C Slave module. +//! \param ulIntFlags is the bit mask of the interrupt sources to be enabled. +//! +//! Enables the indicated I2C Slave interrupt sources. Only the sources that +//! are enabled can be reflected to the processor interrupt; disabled sources +//! have no effect on the processor. +//! +//! The \e ulIntFlags parameter is the logical OR of any of the following: +//! +//! - \b I2C_SLAVE_INT_STOP - Stop condition detected interrupt +//! - \b I2C_SLAVE_INT_START - Start condition detected interrupt +//! - \b I2C_SLAVE_INT_DATA - Data interrupt +//! +//! \return None. +// +//***************************************************************************** +void +I2CSlaveIntEnableEx(unsigned long ulBase, unsigned long ulIntFlags) +{ + // + // Check the arguments. + // + ASSERT((ulBase == I2C0_SLAVE_BASE) || (ulBase == I2C1_SLAVE_BASE)); + + // + // Enable the slave interrupt. + // + HWREG(ulBase + I2C_O_SIMR) |= ulIntFlags; +} + +//***************************************************************************** +// +//! Disables the I2C Master interrupt. +//! +//! \param ulBase is the base address of the I2C Master module. +//! +//! Disables the I2C Master interrupt source. +//! +//! \return None. +// +//***************************************************************************** +void +I2CMasterIntDisable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == I2C0_MASTER_BASE) || (ulBase == I2C1_MASTER_BASE)); + + // + // Disable the master interrupt. + // + HWREG(ulBase + I2C_O_MIMR) = 0; +} + +//***************************************************************************** +// +//! Disables the I2C Slave interrupt. +//! +//! \param ulBase is the base address of the I2C Slave module. +//! +//! Disables the I2C Slave interrupt source. +//! +//! \return None. +// +//***************************************************************************** +void +I2CSlaveIntDisable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == I2C0_SLAVE_BASE) || (ulBase == I2C1_SLAVE_BASE)); + + // + // Disable the slave interrupt. + // + HWREG(ulBase + I2C_O_SIMR) &= ~I2C_SLAVE_INT_DATA; +} + +//***************************************************************************** +// +//! Disables individual I2C Slave interrupt sources. +//! +//! \param ulBase is the base address of the I2C Slave module. +//! \param ulIntFlags is the bit mask of the interrupt sources to be disabled. +//! +//! Disables the indicated I2C Slave interrupt sources. Only the sources that +//! are enabled can be reflected to the processor interrupt; disabled sources +//! have no effect on the processor. +//! +//! The \e ulIntFlags parameter has the same definition as the \e ulIntFlags +//! parameter to I2CSlaveIntEnableEx(). +//! +//! \return None. +// +//***************************************************************************** +void +I2CSlaveIntDisableEx(unsigned long ulBase, unsigned long ulIntFlags) +{ + // + // Check the arguments. + // + ASSERT((ulBase == I2C0_SLAVE_BASE) || (ulBase == I2C1_SLAVE_BASE)); + + // + // Disable the slave interrupt. + // + HWREG(ulBase + I2C_O_SIMR) &= ~ulIntFlags; +} + +//***************************************************************************** +// +//! Gets the current I2C Master interrupt status. +//! +//! \param ulBase is the base address of the I2C Master module. +//! \param bMasked is false if the raw interrupt status is requested and +//! true if the masked interrupt status is requested. +//! +//! This returns the interrupt status for the I2C Master module. Either the +//! raw interrupt status or the status of interrupts that are allowed to +//! reflect to the processor can be returned. +//! +//! \return The current interrupt status, returned as \b true if active +//! or \b false if not active. +// +//***************************************************************************** +tBoolean +I2CMasterIntStatus(unsigned long ulBase, tBoolean bMasked) +{ + // + // Check the arguments. + // + ASSERT((ulBase == I2C0_MASTER_BASE) || (ulBase == I2C1_MASTER_BASE)); + + // + // Return either the interrupt status or the raw interrupt status as + // requested. + // + if(bMasked) + { + return((HWREG(ulBase + I2C_O_MMIS)) ? true : false); + } + else + { + return((HWREG(ulBase + I2C_O_MRIS)) ? true : false); + } +} + +//***************************************************************************** +// +//! Gets the current I2C Slave interrupt status. +//! +//! \param ulBase is the base address of the I2C Slave module. +//! \param bMasked is false if the raw interrupt status is requested and +//! true if the masked interrupt status is requested. +//! +//! This returns the interrupt status for the I2C Slave module. Either the raw +//! interrupt status or the status of interrupts that are allowed to reflect to +//! the processor can be returned. +//! +//! \return The current interrupt status, returned as \b true if active +//! or \b false if not active. +// +//***************************************************************************** +tBoolean +I2CSlaveIntStatus(unsigned long ulBase, tBoolean bMasked) +{ + // + // Check the arguments. + // + ASSERT((ulBase == I2C0_SLAVE_BASE) || (ulBase == I2C1_SLAVE_BASE)); + + // + // Return either the interrupt status or the raw interrupt status as + // requested. + // + if(bMasked) + { + return((HWREG(ulBase + I2C_O_SMIS)) ? true : false); + } + else + { + return((HWREG(ulBase + I2C_O_SRIS)) ? true : false); + } +} + +//***************************************************************************** +// +//! Gets the current I2C Slave interrupt status. +//! +//! \param ulBase is the base address of the I2C Slave module. +//! \param bMasked is false if the raw interrupt status is requested and +//! true if the masked interrupt status is requested. +//! +//! This returns the interrupt status for the I2C Slave module. Either the raw +//! interrupt status or the status of interrupts that are allowed to reflect to +//! the processor can be returned. +//! +//! \return Returns the current interrupt status, enumerated as a bit field of +//! values described in I2CSlaveIntEnableEx(). +// +//***************************************************************************** +unsigned long +I2CSlaveIntStatusEx(unsigned long ulBase, tBoolean bMasked) +{ + unsigned long ulValue; + + // + // Check the arguments. + // + ASSERT((ulBase == I2C0_SLAVE_BASE) || (ulBase == I2C1_SLAVE_BASE)); + + // + // Return either the interrupt status or the raw interrupt status as + // requested. + // + if(bMasked) + { + // + // Workaround for I2C slave masked interrupt status register errata + // (7.1) for Dustdevil Rev A0 devices. + // + if(CLASS_IS_DUSTDEVIL && REVISION_IS_A0) + { + ulValue = HWREG(ulBase + I2C_O_SRIS); + return(ulValue & HWREG(ulBase + I2C_O_SIMR)); + } + else + { + return(HWREG(ulBase + I2C_O_SMIS)); + } + } + else + { + return(HWREG(ulBase + I2C_O_SRIS)); + } +} + +//***************************************************************************** +// +//! Clears I2C Master interrupt sources. +//! +//! \param ulBase is the base address of the I2C Master module. +//! +//! The I2C Master interrupt source is cleared, so that it no longer asserts. +//! This must be done in the interrupt handler to keep it from being called +//! again immediately upon exit. +//! +//! \note Since there is a write buffer in the Cortex-M3 processor, it may take +//! several clock cycles before the interrupt source is actually cleared. +//! Therefore, it is recommended that the interrupt source be cleared early in +//! the interrupt handler (as opposed to the very last action) to avoid +//! returning from the interrupt handler before the interrupt source is +//! actually cleared. Failure to do so may result in the interrupt handler +//! being immediately reentered (since NVIC still sees the interrupt source +//! asserted). +//! +//! \return None. +// +//***************************************************************************** +void +I2CMasterIntClear(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == I2C0_MASTER_BASE) || (ulBase == I2C1_MASTER_BASE)); + + // + // Clear the I2C master interrupt source. + // + HWREG(ulBase + I2C_O_MICR) = I2C_MICR_IC; + + // + // Workaround for I2C master interrupt clear errata for rev B Stellaris + // devices. For later devices, this write is ignored and therefore + // harmless (other than the slight performance hit). + // + HWREG(ulBase + I2C_O_MMIS) = I2C_MICR_IC; +} + +//***************************************************************************** +// +//! Clears I2C Slave interrupt sources. +//! +//! \param ulBase is the base address of the I2C Slave module. +//! +//! The I2C Slave interrupt source is cleared, so that it no longer asserts. +//! This must be done in the interrupt handler to keep it from being called +//! again immediately upon exit. +//! +//! \note Since there is a write buffer in the Cortex-M3 processor, it may take +//! several clock cycles before the interrupt source is actually cleared. +//! Therefore, it is recommended that the interrupt source be cleared early in +//! the interrupt handler (as opposed to the very last action) to avoid +//! returning from the interrupt handler before the interrupt source is +//! actually cleared. Failure to do so may result in the interrupt handler +//! being immediately reentered (since NVIC still sees the interrupt source +//! asserted). +//! +//! \return None. +// +//***************************************************************************** +void +I2CSlaveIntClear(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == I2C0_SLAVE_BASE) || (ulBase == I2C1_SLAVE_BASE)); + + // + // Clear the I2C slave interrupt source. + // + HWREG(ulBase + I2C_O_SICR) = I2C_SICR_DATAIC; +} + +//***************************************************************************** +// +//! Clears I2C Slave interrupt sources. +//! +//! \param ulBase is the base address of the I2C Slave module. +//! \param ulIntFlags is a bit mask of the interrupt sources to be cleared. +//! +//! The specified I2C Slave interrupt sources are cleared, so that they no +//! longer assert. This must be done in the interrupt handler to keep it from +//! being called again immediately upon exit. +//! +//! The \e ulIntFlags parameter has the same definition as the \e ulIntFlags +//! parameter to I2CSlaveIntEnableEx(). +//! +//! \note Since there is a write buffer in the Cortex-M3 processor, it may take +//! several clock cycles before the interrupt source is actually cleared. +//! Therefore, it is recommended that the interrupt source be cleared early in +//! the interrupt handler (as opposed to the very last action) to avoid +//! returning from the interrupt handler before the interrupt source is +//! actually cleared. Failure to do so may result in the interrupt handler +//! being immediately reentered (since NVIC still sees the interrupt source +//! asserted). +//! +//! \return None. +// +//***************************************************************************** +void +I2CSlaveIntClearEx(unsigned long ulBase, unsigned long ulIntFlags) +{ + // + // Check the arguments. + // + ASSERT((ulBase == I2C0_SLAVE_BASE) || (ulBase == I2C1_SLAVE_BASE)); + + // + // Clear the I2C slave interrupt source. + // + HWREG(ulBase + I2C_O_SICR) = ulIntFlags; +} + +//***************************************************************************** +// +//! Sets the address that the I2C Master will place on the bus. +//! +//! \param ulBase is the base address of the I2C Master module. +//! \param ucSlaveAddr 7-bit slave address +//! \param bReceive flag indicating the type of communication with the slave +//! +//! This function will set the address that the I2C Master will place on the +//! bus when initiating a transaction. When the \e bReceive parameter is set +//! to \b true, the address will indicate that the I2C Master is initiating a +//! read from the slave; otherwise the address will indicate that the I2C +//! Master is initiating a write to the slave. +//! +//! \return None. +// +//***************************************************************************** +void +I2CMasterSlaveAddrSet(unsigned long ulBase, unsigned char ucSlaveAddr, + tBoolean bReceive) +{ + // + // Check the arguments. + // + ASSERT((ulBase == I2C0_MASTER_BASE) || (ulBase == I2C1_MASTER_BASE)); + ASSERT(!(ucSlaveAddr & 0x80)); + + // + // Set the address of the slave with which the master will communicate. + // + HWREG(ulBase + I2C_O_MSA) = (ucSlaveAddr << 1) | bReceive; +} + +//***************************************************************************** +// +//! Indicates whether or not the I2C Master is busy. +//! +//! \param ulBase is the base address of the I2C Master module. +//! +//! This function returns an indication of whether or not the I2C Master is +//! busy transmitting or receiving data. +//! +//! \return Returns \b true if the I2C Master is busy; otherwise, returns +//! \b false. +// +//***************************************************************************** +tBoolean +I2CMasterBusy(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == I2C0_MASTER_BASE) || (ulBase == I2C1_MASTER_BASE)); + + // + // Return the busy status. + // + if(HWREG(ulBase + I2C_O_MCS) & I2C_MCS_BUSY) + { + return(true); + } + else + { + return(false); + } +} + +//***************************************************************************** +// +//! Indicates whether or not the I2C bus is busy. +//! +//! \param ulBase is the base address of the I2C Master module. +//! +//! This function returns an indication of whether or not the I2C bus is busy. +//! This function can be used in a multi-master environment to determine if +//! another master is currently using the bus. +//! +//! \return Returns \b true if the I2C bus is busy; otherwise, returns +//! \b false. +// +//***************************************************************************** +tBoolean +I2CMasterBusBusy(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == I2C0_MASTER_BASE) || (ulBase == I2C1_MASTER_BASE)); + + // + // Return the bus busy status. + // + if(HWREG(ulBase + I2C_O_MCS) & I2C_MCS_BUSBSY) + { + return(true); + } + else + { + return(false); + } +} + +//***************************************************************************** +// +//! Controls the state of the I2C Master module. +//! +//! \param ulBase is the base address of the I2C Master module. +//! \param ulCmd command to be issued to the I2C Master module +//! +//! This function is used to control the state of the Master module send and +//! receive operations. The \e ucCmd parameter can be one of the following +//! values: +//! +//! - \b I2C_MASTER_CMD_SINGLE_SEND +//! - \b I2C_MASTER_CMD_SINGLE_RECEIVE +//! - \b I2C_MASTER_CMD_BURST_SEND_START +//! - \b I2C_MASTER_CMD_BURST_SEND_CONT +//! - \b I2C_MASTER_CMD_BURST_SEND_FINISH +//! - \b I2C_MASTER_CMD_BURST_SEND_ERROR_STOP +//! - \b I2C_MASTER_CMD_BURST_RECEIVE_START +//! - \b I2C_MASTER_CMD_BURST_RECEIVE_CONT +//! - \b I2C_MASTER_CMD_BURST_RECEIVE_FINISH +//! - \b I2C_MASTER_CMD_BURST_RECEIVE_ERROR_STOP +//! +//! \return None. +// +//***************************************************************************** +void +I2CMasterControl(unsigned long ulBase, unsigned long ulCmd) +{ + // + // Check the arguments. + // + ASSERT((ulBase == I2C0_MASTER_BASE) || (ulBase == I2C1_MASTER_BASE)); + ASSERT((ulCmd == I2C_MASTER_CMD_SINGLE_SEND) || + (ulCmd == I2C_MASTER_CMD_SINGLE_RECEIVE) || + (ulCmd == I2C_MASTER_CMD_BURST_SEND_START) || + (ulCmd == I2C_MASTER_CMD_BURST_SEND_CONT) || + (ulCmd == I2C_MASTER_CMD_BURST_SEND_FINISH) || + (ulCmd == I2C_MASTER_CMD_BURST_SEND_ERROR_STOP) || + (ulCmd == I2C_MASTER_CMD_BURST_RECEIVE_START) || + (ulCmd == I2C_MASTER_CMD_BURST_RECEIVE_CONT) || + (ulCmd == I2C_MASTER_CMD_BURST_RECEIVE_FINISH) || + (ulCmd == I2C_MASTER_CMD_BURST_RECEIVE_ERROR_STOP)); + + // + // Send the command. + // + HWREG(ulBase + I2C_O_MCS) = ulCmd; +} + +//***************************************************************************** +// +//! Gets the error status of the I2C Master module. +//! +//! \param ulBase is the base address of the I2C Master module. +//! +//! This function is used to obtain the error status of the Master module send +//! and receive operations. +//! +//! \return Returns the error status, as one of \b I2C_MASTER_ERR_NONE, +//! \b I2C_MASTER_ERR_ADDR_ACK, \b I2C_MASTER_ERR_DATA_ACK, or +//! \b I2C_MASTER_ERR_ARB_LOST. +// +//***************************************************************************** +unsigned long +I2CMasterErr(unsigned long ulBase) +{ + unsigned long ulErr; + + // + // Check the arguments. + // + ASSERT((ulBase == I2C0_MASTER_BASE) || (ulBase == I2C1_MASTER_BASE)); + + // + // Get the raw error state + // + ulErr = HWREG(ulBase + I2C_O_MCS); + + // + // If the I2C master is busy, then all the other bit are invalid, and + // don't have an error to report. + // + if(ulErr & I2C_MCS_BUSY) + { + return(I2C_MASTER_ERR_NONE); + } + + // + // Check for errors. + // + if(ulErr & (I2C_MCS_ERROR | I2C_MCS_ARBLST)) + { + return(ulErr & (I2C_MCS_ARBLST | I2C_MCS_DATACK | I2C_MCS_ADRACK)); + } + else + { + return(I2C_MASTER_ERR_NONE); + } +} + +//***************************************************************************** +// +//! Transmits a byte from the I2C Master. +//! +//! \param ulBase is the base address of the I2C Master module. +//! \param ucData data to be transmitted from the I2C Master +//! +//! This function will place the supplied data into I2C Master Data Register. +//! +//! \return None. +// +//***************************************************************************** +void +I2CMasterDataPut(unsigned long ulBase, unsigned char ucData) +{ + // + // Check the arguments. + // + ASSERT((ulBase == I2C0_MASTER_BASE) || (ulBase == I2C1_MASTER_BASE)); + + // + // Write the byte. + // + HWREG(ulBase + I2C_O_MDR) = ucData; +} + +//***************************************************************************** +// +//! Receives a byte that has been sent to the I2C Master. +//! +//! \param ulBase is the base address of the I2C Master module. +//! +//! This function reads a byte of data from the I2C Master Data Register. +//! +//! \return Returns the byte received from by the I2C Master, cast as an +//! unsigned long. +// +//***************************************************************************** +unsigned long +I2CMasterDataGet(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == I2C0_MASTER_BASE) || (ulBase == I2C1_MASTER_BASE)); + + // + // Read a byte. + // + return(HWREG(ulBase + I2C_O_MDR)); +} + +//***************************************************************************** +// +//! Gets the I2C Slave module status +//! +//! \param ulBase is the base address of the I2C Slave module. +//! +//! This function will return the action requested from a master, if any. +//! Possible values are: +//! +//! - \b I2C_SLAVE_ACT_NONE +//! - \b I2C_SLAVE_ACT_RREQ +//! - \b I2C_SLAVE_ACT_TREQ +//! - \b I2C_SLAVE_ACT_RREQ_FBR +//! +//! \return Returns \b I2C_SLAVE_ACT_NONE to indicate that no action has been +//! requested of the I2C Slave module, \b I2C_SLAVE_ACT_RREQ to indicate that +//! an I2C master has sent data to the I2C Slave module, \b I2C_SLAVE_ACT_TREQ +//! to indicate that an I2C master has requested that the I2C Slave module send +//! data, and \b I2C_SLAVE_ACT_RREQ_FBR to indicate that an I2C master has sent +//! data to the I2C slave and the first byte following the slave's own address +//! has been received. +// +//***************************************************************************** +unsigned long +I2CSlaveStatus(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == I2C0_SLAVE_BASE) || (ulBase == I2C1_SLAVE_BASE)); + + // + // Return the slave status. + // + return(HWREG(ulBase + I2C_O_SCSR)); +} + +//***************************************************************************** +// +//! Transmits a byte from the I2C Slave. +//! +//! \param ulBase is the base address of the I2C Slave module. +//! \param ucData data to be transmitted from the I2C Slave +//! +//! This function will place the supplied data into I2C Slave Data Register. +//! +//! \return None. +// +//***************************************************************************** +void +I2CSlaveDataPut(unsigned long ulBase, unsigned char ucData) +{ + // + // Check the arguments. + // + ASSERT((ulBase == I2C0_SLAVE_BASE) || (ulBase == I2C1_SLAVE_BASE)); + + // + // Write the byte. + // + HWREG(ulBase + I2C_O_SDR) = ucData; +} + +//***************************************************************************** +// +//! Receives a byte that has been sent to the I2C Slave. +//! +//! \param ulBase is the base address of the I2C Slave module. +//! +//! This function reads a byte of data from the I2C Slave Data Register. +//! +//! \return Returns the byte received from by the I2C Slave, cast as an +//! unsigned long. +// +//***************************************************************************** +unsigned long +I2CSlaveDataGet(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == I2C0_SLAVE_BASE) || (ulBase == I2C1_SLAVE_BASE)); + + // + // Read a byte. + // + return(HWREG(ulBase + I2C_O_SDR)); +} + +//***************************************************************************** +// +// Close the Doxygen group. +//! @} +// +//***************************************************************************** diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/i2c.h b/bsp/lm3s_9b9x/Libraries/driverlib/i2c.h new file mode 100644 index 0000000000000000000000000000000000000000..cb93ded54d54cb8ac8caaaa34cf45870901360ca --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/i2c.h @@ -0,0 +1,177 @@ +//***************************************************************************** +// +// i2c.h - Prototypes for the I2C Driver. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +#ifndef __I2C_H__ +#define __I2C_H__ + +//***************************************************************************** +// +// If building with a C++ compiler, make all of the definitions in this header +// have a C binding. +// +//***************************************************************************** +#ifdef __cplusplus +extern "C" +{ +#endif + +//***************************************************************************** +// +// Defines for the API. +// +//***************************************************************************** + +//***************************************************************************** +// +// Interrupt defines. +// +//***************************************************************************** +#define I2C_INT_MASTER 0x00000001 +#define I2C_INT_SLAVE 0x00000002 + +//***************************************************************************** +// +// I2C Master commands. +// +//***************************************************************************** +#define I2C_MASTER_CMD_SINGLE_SEND \ + 0x00000007 +#define I2C_MASTER_CMD_SINGLE_RECEIVE \ + 0x00000007 +#define I2C_MASTER_CMD_BURST_SEND_START \ + 0x00000003 +#define I2C_MASTER_CMD_BURST_SEND_CONT \ + 0x00000001 +#define I2C_MASTER_CMD_BURST_SEND_FINISH \ + 0x00000005 +#define I2C_MASTER_CMD_BURST_SEND_ERROR_STOP \ + 0x00000004 +#define I2C_MASTER_CMD_BURST_RECEIVE_START \ + 0x0000000b +#define I2C_MASTER_CMD_BURST_RECEIVE_CONT \ + 0x00000009 +#define I2C_MASTER_CMD_BURST_RECEIVE_FINISH \ + 0x00000005 +#define I2C_MASTER_CMD_BURST_RECEIVE_ERROR_STOP \ + 0x00000004 + +//***************************************************************************** +// +// I2C Master error status. +// +//***************************************************************************** +#define I2C_MASTER_ERR_NONE 0 +#define I2C_MASTER_ERR_ADDR_ACK 0x00000004 +#define I2C_MASTER_ERR_DATA_ACK 0x00000008 +#define I2C_MASTER_ERR_ARB_LOST 0x00000010 + +//***************************************************************************** +// +// I2C Slave action requests +// +//***************************************************************************** +#define I2C_SLAVE_ACT_NONE 0 +#define I2C_SLAVE_ACT_RREQ 0x00000001 // Master has sent data +#define I2C_SLAVE_ACT_TREQ 0x00000002 // Master has requested data +#define I2C_SLAVE_ACT_RREQ_FBR 0x00000005 // Master has sent first byte + +//***************************************************************************** +// +// Miscellaneous I2C driver definitions. +// +//***************************************************************************** +#define I2C_MASTER_MAX_RETRIES 1000 // Number of retries + +//***************************************************************************** +// +// I2C Slave interrupts. +// +//***************************************************************************** +#define I2C_SLAVE_INT_STOP 0x00000004 // Stop Condition Interrupt. +#define I2C_SLAVE_INT_START 0x00000002 // Start Condition Interrupt. +#define I2C_SLAVE_INT_DATA 0x00000001 // Data Interrupt. + +//***************************************************************************** +// +// Prototypes for the APIs. +// +//***************************************************************************** +extern void I2CIntRegister(unsigned long ulBase, void(fnHandler)(void)); +extern void I2CIntUnregister(unsigned long ulBase); +extern tBoolean I2CMasterBusBusy(unsigned long ulBase); +extern tBoolean I2CMasterBusy(unsigned long ulBase); +extern void I2CMasterControl(unsigned long ulBase, unsigned long ulCmd); +extern unsigned long I2CMasterDataGet(unsigned long ulBase); +extern void I2CMasterDataPut(unsigned long ulBase, unsigned char ucData); +extern void I2CMasterDisable(unsigned long ulBase); +extern void I2CMasterEnable(unsigned long ulBase); +extern unsigned long I2CMasterErr(unsigned long ulBase); +extern void I2CMasterInitExpClk(unsigned long ulBase, unsigned long ulI2CClk, + tBoolean bFast); +extern void I2CMasterIntClear(unsigned long ulBase); +extern void I2CMasterIntDisable(unsigned long ulBase); +extern void I2CMasterIntEnable(unsigned long ulBase); +extern tBoolean I2CMasterIntStatus(unsigned long ulBase, tBoolean bMasked); +extern void I2CMasterSlaveAddrSet(unsigned long ulBase, + unsigned char ucSlaveAddr, + tBoolean bReceive); +extern unsigned long I2CSlaveDataGet(unsigned long ulBase); +extern void I2CSlaveDataPut(unsigned long ulBase, unsigned char ucData); +extern void I2CSlaveDisable(unsigned long ulBase); +extern void I2CSlaveEnable(unsigned long ulBase); +extern void I2CSlaveInit(unsigned long ulBase, unsigned char ucSlaveAddr); +extern void I2CSlaveIntClear(unsigned long ulBase); +extern void I2CSlaveIntDisable(unsigned long ulBase); +extern void I2CSlaveIntEnable(unsigned long ulBase); +extern void I2CSlaveIntClearEx(unsigned long ulBase, unsigned long ulIntFlags); +extern void I2CSlaveIntDisableEx(unsigned long ulBase, + unsigned long ulIntFlags); +extern void I2CSlaveIntEnableEx(unsigned long ulBase, unsigned long ulIntFlags); +extern tBoolean I2CSlaveIntStatus(unsigned long ulBase, tBoolean bMasked); +extern unsigned long I2CSlaveIntStatusEx(unsigned long ulBase, + tBoolean bMasked); +extern unsigned long I2CSlaveStatus(unsigned long ulBase); + +//***************************************************************************** +// +// Several I2C APIs have been renamed, with the original function name being +// deprecated. These defines provide backward compatibility. +// +//***************************************************************************** +#ifndef DEPRECATED +#include "driverlib/sysctl.h" +#define I2CMasterInit(a, b) \ + I2CMasterInitExpClk(a, SysCtlClockGet(), b) +#endif + +//***************************************************************************** +// +// Mark the end of the C bindings section for C++ compilers. +// +//***************************************************************************** +#ifdef __cplusplus +} +#endif + +#endif // __I2C_H__ diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/i2s.c b/bsp/lm3s_9b9x/Libraries/driverlib/i2s.c new file mode 100644 index 0000000000000000000000000000000000000000..358d1a012e9ef7b565647fdb2596d4bdd56f3ee4 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/i2s.c @@ -0,0 +1,1136 @@ +//***************************************************************************** +// +// i2s.c - Driver for the I2S controller. +// +// Copyright (c) 2008-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +//***************************************************************************** +// +//! \addtogroup i2s_api +//! @{ +// +//***************************************************************************** + +#include "inc/hw_i2s.h" +#include "inc/hw_ints.h" +#include "inc/hw_memmap.h" +#include "inc/hw_types.h" +#include "driverlib/debug.h" +#include "driverlib/i2s.h" +#include "driverlib/interrupt.h" + +//***************************************************************************** +// +//! Enables the I2S transmit module for operation. +//! +//! \param ulBase is the I2S module base address. +//! +//! This function enables the transmit module for operation. The module +//! should be enabled after configuration. When the module is disabled, +//! no data or clocks will be generated on the I2S signals. +//! +//! \return None. +// +//***************************************************************************** +void +I2STxEnable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == I2S0_BASE); + + // + // Enable the tx FIFO service request. + // + HWREG(ulBase + I2S_O_TXISM) = I2S_TXISM_FFM; + + // + // Read-modify-write the enable bit. + // + HWREG(ulBase + I2S_O_CFG) |= I2S_CFG_TXEN; +} + +//***************************************************************************** +// +//! Disables the I2S transmit module for operation. +//! +//! \param ulBase is the I2S module base address. +//! +//! This function disables the transmit module for operation. The module +//! should be disabled before configuration. When the module is disabled, +//! no data or clocks will be generated on the I2S signals. +//! +//! \return None. +// +//***************************************************************************** +void +I2STxDisable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == I2S0_BASE); + + // + // Read-modify-write the enable bit. + // + HWREG(ulBase + I2S_O_CFG) &= ~I2S_CFG_TXEN; +} + +//***************************************************************************** +// +//! Writes data samples to the I2S transmit FIFO with blocking. +//! +//! \param ulBase is the I2S module base address. +//! \param ulData is the single or dual channel I2S data. +//! +//! This function writes a single channel sample or combined left-right +//! samples to the I2S transmit FIFO. The format of the sample is determined +//! by the configuration that was used with the function I2STxConfigSet(). +//! If the transmit mode is I2S_MODE_DUAL_STEREO then the \e ulData parameter +//! contains either the left or right sample. The left and right sample +//! alternate with each write to the FIFO, left sample first. If the transmit +//! mode is I2S_MODE_COMPACT_STEREO_16 or I2S_MODE_COMPACT_STEREO_8, then the +//! \e ulData parameter contains both the left and right samples. If the +//! transmit mode is I2S_MODE_SINGLE_MONO then the \e ulData parameter +//! contains the single channel sample. +//! +//! For the compact modes, both the left and right samples are written at +//! the same time. If 16-bit compact mode is used, then the least significant +//! 16 bits contain the left sample, and the most significant 16 bits contain +//! the right sample. If 8-bit compact mode is used, then the lower 8 bits +//! contain the left sample, and the next 8 bits contain the right sample, +//! with the upper 16 bits unused. +//! +//! If there is no room in the transmit FIFO, then this function will wait +//! in a polling loop until the data can be written. +//! +//! \return None. +// +//***************************************************************************** +void +I2STxDataPut(unsigned long ulBase, unsigned long ulData) +{ + // + // Check the arguments. + // + ASSERT(ulBase == I2S0_BASE); + + // + // Wait until there is space. + // + while(HWREG(ulBase + I2S_O_TXLEV) >= 16) + { + } + + // + // Write the data to the I2S. + // + HWREG(ulBase + I2S_O_TXFIFO) = ulData; +} + +//***************************************************************************** +// +//! Writes data samples to the I2S transmit FIFO without blocking. +//! +//! \param ulBase is the I2S module base address. +//! \param ulData is the single or dual channel I2S data. +//! +//! This function writes a single channel sample or combined left-right +//! samples to the I2S transmit FIFO. The format of the sample is determined +//! by the configuration that was used with the function I2STxConfigSet(). +//! If the transmit mode is I2S_MODE_DUAL_STEREO then the \e ulData parameter +//! contains either the left or right sample. The left and right sample +//! alternate with each write to the FIFO, left sample first. If the transmit +//! mode is I2S_MODE_COMPACT_STEREO_16 or I2S_MODE_COMPACT_STEREO_8, then the +//! \e ulData parameter contains both the left and right samples. If the +//! transmit mode is I2S_MODE_SINGLE_MONO then the \e ulData parameter +//! contains the single channel sample. +//! +//! For the compact modes, both the left and right samples are written at +//! the same time. If 16-bit compact mode is used, then the least significant +//! 16 bits contain the left sample, and the most significant 16 bits contain +//! the right sample. If 8-bit compact mode is used, then the lower 8 bits +//! contain the left sample, and the next 8 bits contain the right sample, +//! with the upper 16 bits unused. +//! +//! If there is no room in the transmit FIFO, then this function will return +//! immediately without writing any data to the FIFO. +//! +//! \return The number of elements written to the I2S transmit FIFO (1 or 0). +// +//***************************************************************************** +long +I2STxDataPutNonBlocking(unsigned long ulBase, unsigned long ulData) +{ + // + // Check the arguments. + // + ASSERT(ulBase == I2S0_BASE); + + // + // Check for space to write. + // + if(HWREG(ulBase + I2S_O_TXLEV) < 16) + { + HWREG(ulBase + I2S_O_TXFIFO) = ulData; + return(1); + } + else + { + return(0); + } +} + +//***************************************************************************** +// +//! Configures the I2S transmit module. +//! +//! \param ulBase is the I2S module base address. +//! \param ulConfig is the logical OR of the configuration options. +//! +//! This function is used to configure the options for the I2S transmit +//! channel. The parameter \e ulConfig is the logical OR of the following +//! options: +//! +//! - \b I2S_CONFIG_FORMAT_I2S for standard I2S format, +//! \b I2S_CONFIG_FORMAT_LEFT_JUST for left justified format, or +//! \b I2S_CONFIG_FORMAT_RIGHT_JUST for right justified format. +//! - \b I2S_CONFIG_SCLK_INVERT to invert the polarity of the serial bit clock. +//! - \b I2S_CONFIG_MODE_DUAL for dual channel stereo, +//! \b I2S_CONFIG_MODE_COMPACT_16 for 16-bit compact stereo mode, +//! \b I2S_CONFIG_MODE_COMPACT_8 for 8-bit compact stereo mode, or +//! \b I2S_CONFIG_MODE_MONO for single channel mono format. +//! - \b I2S_CONFIG_CLK_MASTER or \b I2S_CONFIG_CLK_SLAVE to select whether +//! the I2S transmitter is the clock master or slave. +//! - \b I2S_CONFIG_SAMPLE_SIZE_32, \b _24, \b _20, \b _16, or \b _8 +//! to select the number of bits per sample. +//! - \b I2S_CONFIG_WIRE_SIZE_32, \b _24, \b _20, \b _16, or \b _8 +//! to select the number of bits per word that are transferred on the data +//! line. +//! - \b I2S_CONFIG_EMPTY_ZERO or \b I2S_CONFIG_EMPTY_REPEAT to select whether +//! the module transmits zeroes or repeats the last sample when the FIFO is +//! empty. +//! +//! \return None. +// +//***************************************************************************** +void +I2STxConfigSet(unsigned long ulBase, unsigned long ulConfig) +{ + // + // Check the arguments. + // + ASSERT(ulBase == I2S0_BASE); + ASSERT((ulConfig & (I2S_CONFIG_FORMAT_MASK | I2S_CONFIG_MODE_MASK | + I2S_CONFIG_EMPTY_MASK | I2S_CONFIG_CLK_MASK | + I2S_CONFIG_SAMPLE_SIZE_MASK | + I2S_CONFIG_WIRE_SIZE_MASK)) == ulConfig); + + // + // Check to see if a compact mode is used. + // + if((ulConfig & I2S_CONFIG_MODE_MASK) == I2S_CONFIG_MODE_COMPACT_8) + { + // + // If compact 8 mode is used, then need to adjust some bits + // before writing the config register. Also set the FIFO + // config register for 8 bit compact samples. + // + ulConfig &= ~I2S_CONFIG_MODE_MONO; + HWREG(ulBase + I2S_O_TXFIFOCFG) = I2S_TXFIFOCFG_CSS; + } + else + { + // + // If compact 8 mode is not used, then set the FIFO config + // register for 16 bit. This is okay if a compact mode is + // not used. + // + HWREG(ulBase + I2S_O_TXFIFOCFG) = 0; + } + + // + // Write the configuration register. Since all the fields are + // specified by the configuration parameter, it is not necessary + // to do a read-modify-write. + // + HWREG(ulBase + I2S_O_TXCFG) = ulConfig; +} + +//***************************************************************************** +// +//! Sets the FIFO level at which a service request is generated. +//! +//! \param ulBase is the I2S module base address. +//! \param ulLevel is the FIFO service request limit. +//! +//! This function is used to set the transmit FIFO fullness level at which +//! a service request will occur. The service request is used to generate +//! an interrupt or a DMA transfer request. The transmit FIFO will +//! generate a service request when the number of items in the FIFO is +//! less than the level specified in the \e ulLevel parameter. For example, +//! if \e ulLevel is 8, then a service request will be generated when +//! there are less than 8 samples remaining in the transmit FIFO. +//! +//! For the purposes of counting the FIFO level, a left-right sample pair +//! counts as 2, whether the mode is dual or compact stereo. When mono +//! mode is used, internally the mono sample is still treated as a sample +//! pair, so a single mono sample counts as 2. Since the FIFO always deals +//! with sample pairs, the level must be an even number from 0 to 16. The +//! maximum value is 16, which will cause a service request when there +//! is any room in the FIFO. The minimum value is 0, which disables the +//! service request. +//! +//! \return None. +// +//***************************************************************************** +void +I2STxFIFOLimitSet(unsigned long ulBase, unsigned long ulLevel) +{ + // + // Check the arguments. + // + ASSERT(ulBase == I2S0_BASE); + ASSERT(ulLevel <= 16); + + // + // Write the FIFO limit + // + HWREG(ulBase + I2S_O_TXLIMIT) = ulLevel; +} + +//***************************************************************************** +// +//! Gets the current setting of the FIFO service request level. +//! +//! \param ulBase is the I2S module base address. +//! +//! This function is used to get the value of the transmit FIFO service +//! request level. This value is set using the I2STxFIFOLimitSet() +//! function. +//! +//! \return Returns the current value of the FIFO service request limit. +// +//***************************************************************************** +unsigned long +I2STxFIFOLimitGet(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == I2S0_BASE); + + // + // Read and return the FIFO limit + // + return(HWREG(ulBase + I2S_O_TXLIMIT)); +} + +//***************************************************************************** +// +//! Gets the number of samples in the transmit FIFO. +//! +//! \param ulBase is the I2S module base address. +//! +//! This function is used to get the number of samples in the transmit +//! FIFO. For the purposes of measuring the FIFO level, a left-right sample +//! pair counts as 2, whether the mode is dual or compact stereo. When mono +//! mode is used, internally the mono sample is still treated as a sample +//! pair, so a single mono sample counts as 2. Since the FIFO always deals +//! with sample pairs, normally the level will be an even number from 0 to +//! 16. If dual stereo mode is used and only the left sample has been +//! written without the matching right sample, then the FIFO level will be an +//! odd value. If the FIFO level is odd, it indicates a left-right sample +//! mismatch. +//! +//! \return Returns the number of samples in the transmit FIFO, which will +//! normally be an even number. +// +//***************************************************************************** +unsigned long +I2STxFIFOLevelGet(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == I2S0_BASE); + + // + // Read and return the transmit FIFO level. + // + return(HWREG(ulBase + I2S_O_TXLEV)); +} + +//***************************************************************************** +// +//! Enables the I2S receive module for operation. +//! +//! \param ulBase is the I2S module base address. +//! +//! This function enables the receive module for operation. The module +//! should be enabled after configuration. When the module is disabled, +//! no data will be clocked in regardless of the signals on the I2S interface. +//! +//! \return None. +// +//***************************************************************************** +void +I2SRxEnable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == I2S0_BASE); + + // + // Enable the tx FIFO service request. + // + HWREG(ulBase + I2S_O_RXISM) = I2S_RXISM_FFM; + + // + // Read-modify-write the enable bit. + // + HWREG(ulBase + I2S_O_CFG) |= I2S_CFG_RXEN; +} + +//***************************************************************************** +// +//! Disables the I2S receive module for operation. +//! +//! \param ulBase is the I2S module base address. +//! +//! This function disables the receive module for operation. The module +//! should be disabled before configuration. When the module is disabled, +//! no data will be clocked in regardless of the signals on the I2S interface. +//! +//! \return None. +// +//***************************************************************************** +void +I2SRxDisable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == I2S0_BASE); + + // + // Read-modify-write the enable bit. + // + HWREG(ulBase + I2S_O_CFG) &= ~I2S_CFG_RXEN; +} + +//***************************************************************************** +// +//! Reads data samples from the I2S receive FIFO with blocking. +//! +//! \param ulBase is the I2S module base address. +//! \param pulData points to storage for the returned I2S sample data. +//! +//! This function reads a single channel sample or combined left-right +//! samples from the I2S receive FIFO. The format of the sample is determined +//! by the configuration that was used with the function I2SRxConfigSet(). +//! If the receive mode is I2S_MODE_DUAL_STEREO then the returned value +//! contains either the left or right sample. The left and right sample +//! alternate with each read from the FIFO, left sample first. If the receive +//! mode is I2S_MODE_COMPACT_STEREO_16 or I2S_MODE_COMPACT_STEREO_8, then the +//! returned data contains both the left and right samples. If the +//! receive mode is I2S_MODE_SINGLE_MONO then the returned data +//! contains the single channel sample. +//! +//! For the compact modes, both the left and right samples are read at +//! the same time. If 16-bit compact mode is used, then the least significant +//! 16 bits contain the left sample, and the most significant 16 bits contain +//! the right sample. If 8-bit compact mode is used, then the lower 8 bits +//! contain the left sample, and the next 8 bits contain the right sample, +//! with the upper 16 bits unused. +//! +//! If there is no data in the receive FIFO, then this function will wait +//! in a polling loop until data is available. +//! +//! \return None. +// +//***************************************************************************** +void +I2SRxDataGet(unsigned long ulBase, unsigned long *pulData) +{ + // + // Check the arguments. + // + ASSERT(ulBase == I2S0_BASE); + + // + // Wait until there is data available. + // + while(HWREG(ulBase + I2S_O_RXLEV) == 0) + { + } + + // + // Read data from the I2S receive FIFO. + // + *pulData = HWREG(ulBase + I2S_O_RXFIFO); +} + +//***************************************************************************** +// +//! Reads data samples from the I2S receive FIFO without blocking. +//! +//! \param ulBase is the I2S module base address. +//! \param pulData points to storage for the returned I2S sample data. +//! +//! This function reads a single channel sample or combined left-right +//! samples from the I2S receive FIFO. The format of the sample is determined +//! by the configuration that was used with the function I2SRxConfigSet(). +//! If the receive mode is I2S_MODE_DUAL_STEREO then the received data +//! contains either the left or right sample. The left and right sample +//! alternate with each read from the FIFO, left sample first. If the receive +//! mode is I2S_MODE_COMPACT_STEREO_16 or I2S_MODE_COMPACT_STEREO_8, then the +//! received data contains both the left and right samples. If the +//! receive mode is I2S_MODE_SINGLE_MONO then the received data +//! contains the single channel sample. +//! +//! For the compact modes, both the left and right samples are read at +//! the same time. If 16-bit compact mode is used, then the least significant +//! 16 bits contain the left sample, and the most significant 16 bits contain +//! the right sample. If 8-bit compact mode is used, then the lower 8 bits +//! contain the left sample, and the next 8 bits contain the right sample, +//! with the upper 16 bits unused. +//! +//! If there is no data in the receive FIFO, then this function will return +//! immediately without reading any data from the FIFO. +//! +//! \return The number of elements read from the I2S receive FIFO (1 or 0). +// +//***************************************************************************** +long +I2SRxDataGetNonBlocking(unsigned long ulBase, unsigned long *pulData) +{ + // + // Check the arguments. + // + ASSERT(ulBase == I2S0_BASE); + + // + // Check for available samples. + // + if(HWREG(ulBase + I2S_O_RXLEV) != 0) + { + *pulData = HWREG(ulBase + I2S_O_RXFIFO); + return(1); + } + else + { + return(0); + } +} + +//***************************************************************************** +// +//! Configures the I2S receive module. +//! +//! \param ulBase is the I2S module base address. +//! \param ulConfig is the logical OR of the configuration options. +//! +//! This function is used to configure the options for the I2S receive +//! channel. The parameter \e ulConfig is the logical OR of the following +//! options: +//! +//! - \b I2S_CONFIG_FORMAT_I2S for standard I2S format, +//! \b I2S_CONFIG_FORMAT_LEFT_JUST for left justified format, or +//! \b I2S_CONFIG_FORMAT_RIGHT_JUST for right justified format. +//! - \b I2S_CONFIG_SCLK_INVERT to invert the polarity of the serial bit clock. +//! - \b I2S_CONFIG_MODE_DUAL for dual channel stereo, +//! \b I2S_CONFIG_MODE_COMPACT_16 for 16-bit compact stereo mode, +//! \b I2S_CONFIG_MODE_COMPACT_8 for 8-bit compact stereo mode, or +//! \b I2S_CONFIG_MODE_MONO for single channel mono format. +//! - \b I2S_CONFIG_CLK_MASTER or \b I2S_CONFIG_CLK_SLAVE to select whether +//! the I2S receiver is the clock master or slave. +//! - \b I2S_CONFIG_SAMPLE_SIZE_32, \b _24, \b _20, \b _16, or \b _8 +//! to select the number of bits per sample. +//! - \b I2S_CONFIG_WIRE_SIZE_32, \b _24, \b _20, \b _16, or \b _8 +//! to select the number of bits per word that are transferred on the data +//! line. +//! +//! \return None. +// +//***************************************************************************** +void +I2SRxConfigSet(unsigned long ulBase, unsigned long ulConfig) +{ + // + // Check the arguments. + // + ASSERT(ulBase == I2S0_BASE); + ASSERT((ulConfig & (I2S_CONFIG_FORMAT_MASK | I2S_CONFIG_MODE_MASK | + I2S_CONFIG_CLK_MASK | I2S_CONFIG_SAMPLE_SIZE_MASK | + I2S_CONFIG_WIRE_SIZE_MASK)) == ulConfig); + + // + // Clear out any prior config of the RX FIFO config register. + // + HWREG(ulBase + I2S_O_RXFIFOCFG) = 0; + + // + // If mono mode is used, then the FMM bit needs to be set. + // + if((ulConfig & I2S_CONFIG_MODE_MASK) == I2S_CONFIG_MODE_MONO) + { + HWREG(ulBase + I2S_O_RXFIFOCFG) |= I2S_RXFIFOCFG_FMM; + } + + // + // If a compact mode is used, then the CSS bit needs to be set. + // + else if((ulConfig & I2S_CONFIG_MODE_MASK) == I2S_CONFIG_MODE_COMPACT_8) + { + HWREG(ulBase + I2S_O_RXFIFOCFG) |= I2S_RXFIFOCFG_CSS; + } + + // + // The "mono" bits needs to be removed from the configuration word + // prior to writing to hardware, because the RX configuration register + // does not actually use these bits. + // + ulConfig &= ~I2S_CONFIG_MODE_MONO; + + // + // Write the configuration register. Since all the fields are + // specified by the configuration parameter, it is not necessary + // to do a read-modify-write. + // + HWREG(ulBase + I2S_O_RXCFG) = ulConfig; +} + +//***************************************************************************** +// +//! Sets the FIFO level at which a service request is generated. +//! +//! \param ulBase is the I2S module base address. +//! \param ulLevel is the FIFO service request limit. +//! +//! This function is used to set the receive FIFO fullness level at which +//! a service request will occur. The service request is used to generate +//! an interrupt or a DMA transfer request. The receive FIFO will +//! generate a service request when the number of items in the FIFO is +//! greater than the level specified in the \e ulLevel parameter. For example, +//! if \e ulLevel is 4, then a service request will be generated when +//! there are more than 4 samples available in the receive FIFO. +//! +//! For the purposes of counting the FIFO level, a left-right sample pair +//! counts as 2, whether the mode is dual or compact stereo. When mono +//! mode is used, internally the mono sample is still treated as a sample +//! pair, so a single mono sample counts as 2. Since the FIFO always deals +//! with sample pairs, the level must be an even number from 0 to 16. The +//! minimum value is 0, which will cause a service request when there +//! is any data available in the FIFO. The maximum value is 16, which +//! disables the service request (because there cannot be more than 16 +//! items in the FIFO). +//! +//! \return None. +// +//***************************************************************************** +void +I2SRxFIFOLimitSet(unsigned long ulBase, unsigned long ulLevel) +{ + // + // Check the arguments. + // + ASSERT(ulBase == I2S0_BASE); + ASSERT(ulLevel <= 16); + + // + // Write the FIFO limit + // + HWREG(ulBase + I2S_O_RXLIMIT) = ulLevel; +} + +//***************************************************************************** +// +//! Gets the current setting of the FIFO service request level. +//! +//! \param ulBase is the I2S module base address. +//! +//! This function is used to get the value of the receive FIFO service +//! request level. This value is set using the I2SRxFIFOLimitSet() +//! function. +//! +//! \return Returns the current value of the FIFO service request limit. +// +//***************************************************************************** +unsigned long +I2SRxFIFOLimitGet(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == I2S0_BASE); + + // + // Read and return the FIFO limit. The lower bit is masked + // because it always reads as 1, and has no meaning. + // + return(HWREG(ulBase + I2S_O_RXLIMIT) & 0xFFFE); +} + +//***************************************************************************** +// +//! Gets the number of samples in the receive FIFO. +//! +//! \param ulBase is the I2S module base address. +//! +//! This function is used to get the number of samples in the receive +//! FIFO. For the purposes of measuring the FIFO level, a left-right sample +//! pair counts as 2, whether the mode is dual or compact stereo. When mono +//! mode is used, internally the mono sample is still treated as a sample +//! pair, so a single mono sample counts as 2. Since the FIFO always deals +//! with sample pairs, normally the level will be an even number from 0 to +//! 16. If dual stereo mode is used and only the left sample has been +//! read without reading the matching right sample, then the FIFO level will +//! be an odd value. If the FIFO level is odd, it indicates a left-right +//! sample mismatch. +//! +//! \return Returns the number of samples in the transmit FIFO, which will +//! normally be an even number. +// +//***************************************************************************** +unsigned long +I2SRxFIFOLevelGet(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == I2S0_BASE); + + // + // Read and return the receive FIFO level. + // + return(HWREG(ulBase + I2S_O_RXLEV)); +} + +//***************************************************************************** +// +//! Enables the I2S transmit and receive modules for operation. +//! +//! \param ulBase is the I2S module base address. +//! +//! This function simultaneously enables the transmit and receive modules for +//! operation, providing a synchronized SCLK and LRCLK. The module should be +//! enabled after configuration. When the module is disabled, no data or +//! clocks will be generated on the I2S signals. +//! +//! \return None. +// +//***************************************************************************** +void +I2STxRxEnable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == I2S0_BASE); + + // + // Enable the Tx FIFO service request. + // + HWREG(ulBase + I2S_O_TXISM) = I2S_TXISM_FFM; + + // + // Enable the Rx FIFO service request. + // + HWREG(ulBase + I2S_O_RXISM) = I2S_RXISM_FFM; + + // + // Enable the transmit and receive modules. + // + HWREG(ulBase + I2S_O_CFG) |= I2S_CFG_TXEN | I2S_CFG_RXEN; +} + +//***************************************************************************** +// +//! Disables the I2S transmit and receive modules. +//! +//! \param ulBase is the I2S module base address. +//! +//! This function simultaneously disables the transmit and receive modules. +//! When the module is disabled, no data or clocks will be generated on the I2S +//! signals. +//! +//! \return None. +// +//***************************************************************************** +void +I2STxRxDisable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == I2S0_BASE); + + // + // Disable the transmit and receive modules. + // + HWREG(ulBase + I2S_O_CFG) &= ~(I2S_CFG_TXEN | I2S_CFG_RXEN); +} + +//***************************************************************************** +// +//! Configures the I2S transmit and receive modules. +//! +//! \param ulBase is the I2S module base address. +//! \param ulConfig is the logical OR of the configuration options. +//! +//! This function is used to configure the options for the I2S transmit and +//! receive channels with identical parameters. The parameter \e ulConfig is +//! the logical OR of the following options: +//! +//! - \b I2S_CONFIG_FORMAT_I2S for standard I2S format, +//! \b I2S_CONFIG_FORMAT_LEFT_JUST for left justified format, or +//! \b I2S_CONFIG_FORMAT_RIGHT_JUST for right justified format. +//! - \b I2S_CONFIG_SCLK_INVERT to invert the polarity of the serial bit clock. +//! - \b I2S_CONFIG_MODE_DUAL for dual channel stereo, +//! \b I2S_CONFIG_MODE_COMPACT_16 for 16-bit compact stereo mode, +//! \b I2S_CONFIG_MODE_COMPACT_8 for 8-bit compact stereo mode, or +//! \b I2S_CONFIG_MODE_MONO for single channel mono format. +//! - \b I2S_CONFIG_CLK_MASTER or \b I2S_CONFIG_CLK_SLAVE to select whether +//! the I2S transmitter is the clock master or slave. +//! - \b I2S_CONFIG_SAMPLE_SIZE_32, \b _24, \b _20, \b _16, or \b _8 +//! to select the number of bits per sample. +//! - \b I2S_CONFIG_WIRE_SIZE_32, \b _24, \b _20, \b _16, or \b _8 +//! to select the number of bits per word that are transferred on the data +//! line. +//! - \b I2S_CONFIG_EMPTY_ZERO or \b I2S_CONFIG_EMPTY_REPEAT to select whether +//! the module transmits zeroes or repeats the last sample when the FIFO is +//! empty. +//! +//! \return None. +// +//***************************************************************************** +void +I2STxRxConfigSet(unsigned long ulBase, unsigned long ulConfig) +{ + // + // Check the arguments. + // + ASSERT(ulBase == I2S0_BASE); + ASSERT((ulConfig & (I2S_CONFIG_FORMAT_MASK | I2S_CONFIG_MODE_MASK | + I2S_CONFIG_EMPTY_MASK | I2S_CONFIG_CLK_MASK | + I2S_CONFIG_SAMPLE_SIZE_MASK | + I2S_CONFIG_WIRE_SIZE_MASK)) == ulConfig); + + // + // Clear out any prior configuration of the FIFO config registers. + // + HWREG(ulBase + I2S_O_TXFIFOCFG) = 0; + HWREG(ulBase + I2S_O_RXFIFOCFG) = 0; + + // + // If mono mode is used, then the FMM bit needs to be set. + // + if((ulConfig & I2S_CONFIG_MODE_MASK) == I2S_CONFIG_MODE_MONO) + { + HWREG(ulBase + I2S_O_RXFIFOCFG) |= I2S_RXFIFOCFG_FMM; + ulConfig &= ~(I2S_CONFIG_MODE_MONO); + } + + // + // If a compact mode is used, then the CSS bit needs to be set. + // + if((ulConfig & I2S_CONFIG_MODE_MASK) == I2S_CONFIG_MODE_COMPACT_8) + { + HWREG(ulBase + I2S_O_TXFIFOCFG) |= I2S_TXFIFOCFG_CSS; + HWREG(ulBase + I2S_O_RXFIFOCFG) |= I2S_RXFIFOCFG_CSS; + } + + // + // Write the configuration register. Since all the fields are specified by + // the configuration parameter, it is not necessary to do a + // read-modify-write. + // + HWREG(ulBase + I2S_O_TXCFG) = ulConfig; + HWREG(ulBase + I2S_O_RXCFG) = ulConfig; +} + +//***************************************************************************** +// +//! Selects the source of the master clock, internal or external. +//! +//! \param ulBase is the I2S module base address. +//! \param ulMClock is the logical OR of the master clock configuration +//! choices. +//! +//! This function selects whether the master clock is sourced from the device +//! internal PLL, or comes from an external pin. The I2S serial bit clock +//! (SCLK) and left-right word clock (LRCLK) are derived from the I2S master +//! clock. The transmit and receive modules can be configured independently. +//! The \e ulMClock parameter is chosen from the following: +//! +//! - one of \b I2S_TX_MCLK_EXT or \b I2S_TX_MCLK_INT +//! - one of \b I2S_RX_MCLK_EXT or \b I2S_RX_MCLK_INT +//! +//! \return Returns None. +// +//***************************************************************************** +void +I2SMasterClockSelect(unsigned long ulBase, unsigned long ulMClock) +{ + unsigned long ulConfig; + + // + // Check the arguments. + // + ASSERT(ulBase == I2S0_BASE); + ASSERT((ulMClock & (I2S_TX_MCLK_EXT | I2S_RX_MCLK_EXT)) == ulMClock); + + // + // Set the clock selection bits in the configuation word. + // + ulConfig = HWREG(ulBase + I2S_O_CFG) & + ~(I2S_TX_MCLK_EXT | I2S_RX_MCLK_EXT); + HWREG(ulBase + I2S_O_CFG) = ulConfig | ulMClock; +} + +//***************************************************************************** +// +//! Enables I2S interrupt sources. +//! +//! \param ulBase is the I2S module base address. +//! \param ulIntFlags is a bit mask of the interrupt sources to be enabled. +//! +//! This function enables the specified I2S sources to generate interrupts. +//! The \e ulIntFlags parameter can be the logical OR of any of the following +//! values: +//! +//! - \b I2S_INT_RXERR for receive errors +//! - \b I2S_INT_RXREQ for receive FIFO service requests +//! - \b I2S_INT_TXERR for transmit errors +//! - \b I2S_INT_TXREQ for transmit FIFO service requests +//! +//! \return Returns None. +// +//***************************************************************************** +void +I2SIntEnable(unsigned long ulBase, unsigned long ulIntFlags) +{ + // + // Check the arguments. + // + ASSERT(ulBase == I2S0_BASE); + ASSERT((ulIntFlags & (I2S_INT_RXERR | I2S_INT_RXREQ | + I2S_INT_TXERR | I2S_INT_TXREQ)) == ulIntFlags); + + // + // Enable the specified interrupts. + // + HWREG(ulBase + I2S_O_IM) |= ulIntFlags; +} + +//***************************************************************************** +// +//! Disables I2S interrupt sources. +//! +//! \param ulBase is the I2S module base address. +//! \param ulIntFlags is a bit mask of the interrupt sources to be disabled. +//! +//! This function disables the specified I2S sources for interrupt +//! generation. The \e ulIntFlags parameter can be the logical OR +//! of any of the following values: \b I2S_INT_RXERR, \b I2S_INT_RXREQ, +//! \b I2S_INT_TXERR, or \b I2S_INT_TXREQ. +//! +//! \return Returns None. +// +//***************************************************************************** +void +I2SIntDisable(unsigned long ulBase, unsigned long ulIntFlags) +{ + // + // Check the arguments. + // + ASSERT(ulBase == I2S0_BASE); + ASSERT((ulIntFlags & (I2S_INT_RXERR | I2S_INT_RXREQ | + I2S_INT_TXERR | I2S_INT_TXREQ)) == ulIntFlags); + + // + // Enable the specified interrupts. + // + HWREG(ulBase + I2S_O_IM) &= ~ulIntFlags; +} + +//***************************************************************************** +// +//! Gets the I2S interrupt status. +//! +//! \param ulBase is the I2S module base address. +//! \param bMasked is set \b true to get the masked interrupt status, or +//! \b false to get the raw interrupt status. +//! +//! This function returns the I2S interrupt status. It can return either +//! the raw or masked interrupt status. +//! +//! \return Returns the masked or raw I2S interrupt status, as a bit field +//! of any of the following values: \b I2S_INT_RXERR, \b I2S_INT_RXREQ, +//! \b I2S_INT_TXERR, or \b I2S_INT_TXREQ +// +//***************************************************************************** +unsigned long +I2SIntStatus(unsigned long ulBase, tBoolean bMasked) +{ + // + // Check the arguments. + // + ASSERT(ulBase == I2S0_BASE); + + // + // Return either the interrupt status or the raw interrupt status as + // requested. + // + if(bMasked) + { + return(HWREG(ulBase + I2S_O_MIS)); + } + else + { + return(HWREG(ulBase + I2S_O_RIS)); + } +} + +//***************************************************************************** +// +//! Clears pending I2S interrupt sources. +//! +//! \param ulBase is the I2S module base address. +//! \param ulIntFlags is a bit mask of the interrupt sources to be cleared. +//! +//! This function clears the specified pending I2S interrupts. This must +//! be done in the interrupt handler to keep the handler from being called +//! again immediately upon exit. The \e ulIntFlags parameter can be the +//! logical OR of any of the following values: \b I2S_INT_RXERR, +//! \b I2S_INT_RXREQ, \b I2S_INT_TXERR, or \b I2S_INT_TXREQ. +//! +//! \note Since there is a write buffer in the Cortex-M3 processor, it may take +//! several clock cycles before the interrupt source is actually cleared. +//! Therefore, it is recommended that the interrupt source be cleared early in +//! the interrupt handler (as opposed to the very last action) to avoid +//! returning from the interrupt handler before the interrupt source is +//! actually cleared. Failure to do so may result in the interrupt handler +//! being immediately reentered (since NVIC still sees the interrupt source +//! asserted). +//! +//! \return Returns None. +// +//***************************************************************************** +void +I2SIntClear(unsigned long ulBase, unsigned long ulIntFlags) +{ + // + // Check the arguments. + // + ASSERT(ulBase == I2S0_BASE); + ASSERT((ulIntFlags & (I2S_INT_RXERR | I2S_INT_RXREQ | + I2S_INT_TXERR | I2S_INT_TXREQ)) == ulIntFlags); + + // + // Clear the requested interrupt sources. + // + HWREG(ulBase + I2S_O_IC) = ulIntFlags; +} + +//***************************************************************************** +// +//! Registers an interrupt handler for the I2S controller. +//! +//! \param ulBase is the I2S module base address. +//! \param pfnHandler is a pointer to the function to be called when the +//! interrupt is activated. +//! +//! This sets and enables the handler to be called when the I2S controller +//! generates an interrupt. Specific I2S interrupts must still be enabled +//! with the I2SIntEnable() function. It is the responsibility of the +//! interrupt handler to clear any pending interrupts with I2SIntClear(). +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +I2SIntRegister(unsigned long ulBase, void (*pfnHandler)(void)) +{ + // + // Check the arguments. + // + ASSERT(ulBase == I2S0_BASE); + ASSERT(pfnHandler); + + // + // Register the interrupt handler. + // + IntRegister(INT_I2S0, pfnHandler); + + // + // Enable the I2S interface interrupt. + // + IntEnable(INT_I2S0); +} + +//***************************************************************************** +// +//! Unregisters an interrupt handler for the I2S controller. +//! +//! \param ulBase is the I2S module base address. +//! +//! This function will disable and clear the handler to be called when the +//! I2S interrupt occurs. +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +I2SIntUnregister(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == I2S0_BASE); + + // + // Disable the I2S interface interrupt. + // + IntDisable(INT_I2S0); + + // + // Unregister the interrupt handler. + // + IntUnregister(INT_I2S0); +} + +//***************************************************************************** +// +// Close the Doxygen group. +//! @} +// +//***************************************************************************** diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/i2s.h b/bsp/lm3s_9b9x/Libraries/driverlib/i2s.h new file mode 100644 index 0000000000000000000000000000000000000000..b86075a736375f6cdbaa86eafdd518c64d42c66f --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/i2s.h @@ -0,0 +1,154 @@ +//***************************************************************************** +// +// i2s.h - Prototypes and macros for the I2S controller. +// +// Copyright (c) 2008-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +#ifndef __I2S_H__ +#define __I2S_H__ + +//***************************************************************************** +// +// If building with a C++ compiler, make all of the definitions in this header +// have a C binding. +// +//***************************************************************************** +#ifdef __cplusplus +extern "C" +{ +#endif + +//***************************************************************************** +// +// Values that can be passed to I2STxConfigSet() and I2SRxConfigSet() +// +//***************************************************************************** +#define I2S_CONFIG_FORMAT_MASK 0x3C000000 // JST, DLY, SCP, LRP +#define I2S_CONFIG_FORMAT_I2S 0x14000000 // !JST, DLY, !SCP, LRP +#define I2S_CONFIG_FORMAT_LEFT_JUST \ + 0x00000000 // !JST, !DLY, !SCP, !LRP +#define I2S_CONFIG_FORMAT_RIGHT_JUST \ + 0x20000000 // JST, !DLY, !SCP, !LRP + +#define I2S_CONFIG_SCLK_INVERT 0x08000000 + +#define I2S_CONFIG_MODE_MASK 0x03000000 +#define I2S_CONFIG_MODE_DUAL 0x00000000 +#define I2S_CONFIG_MODE_COMPACT_16 \ + 0x01000000 +#define I2S_CONFIG_MODE_COMPACT_8 \ + 0x03000000 +#define I2S_CONFIG_MODE_MONO 0x02000000 + +#define I2S_CONFIG_EMPTY_MASK 0x00800000 +#define I2S_CONFIG_EMPTY_ZERO 0x00000000 +#define I2S_CONFIG_EMPTY_REPEAT 0x00800000 + +#define I2S_CONFIG_CLK_MASK 0x00400000 +#define I2S_CONFIG_CLK_MASTER 0x00400000 +#define I2S_CONFIG_CLK_SLAVE 0x00000000 + +#define I2S_CONFIG_SAMPLE_SIZE_MASK \ + 0x0000FC00 +#define I2S_CONFIG_SAMPLE_SIZE_32 \ + 0x00007C00 +#define I2S_CONFIG_SAMPLE_SIZE_24 \ + 0x00005C00 +#define I2S_CONFIG_SAMPLE_SIZE_20 \ + 0x00004C00 +#define I2S_CONFIG_SAMPLE_SIZE_16 \ + 0x00003C00 +#define I2S_CONFIG_SAMPLE_SIZE_8 \ + 0x00001C00 + +#define I2S_CONFIG_WIRE_SIZE_MASK \ + 0x000003F0 +#define I2S_CONFIG_WIRE_SIZE_32 0x000001F0 +#define I2S_CONFIG_WIRE_SIZE_24 0x00000170 +#define I2S_CONFIG_WIRE_SIZE_20 0x00000130 +#define I2S_CONFIG_WIRE_SIZE_16 0x000000F0 +#define I2S_CONFIG_WIRE_SIZE_8 0x00000070 + +//***************************************************************************** +// +// Values that can be passed to I2SMasterClockSelect() +// +//***************************************************************************** +#define I2S_TX_MCLK_EXT 0x00000010 +#define I2S_TX_MCLK_INT 0x00000000 +#define I2S_RX_MCLK_EXT 0x00000020 +#define I2S_RX_MCLK_INT 0x00000000 + +//***************************************************************************** +// +// Values that can be passed to I2SIntEnable(), I2SIntDisable(), and +// I2SIntClear() +// +//***************************************************************************** +#define I2S_INT_RXERR 0x00000020 +#define I2S_INT_RXREQ 0x00000010 +#define I2S_INT_TXERR 0x00000002 +#define I2S_INT_TXREQ 0x00000001 + +//***************************************************************************** +// +// API Function prototypes +// +//***************************************************************************** +extern void I2STxEnable(unsigned long ulBase); +extern void I2STxDisable(unsigned long ulBase); +extern void I2STxDataPut(unsigned long ulBase, unsigned long ulData); +extern long I2STxDataPutNonBlocking(unsigned long ulBase, + unsigned long ulData); +extern void I2STxConfigSet(unsigned long ulBase, unsigned long ulConfig); +extern void I2STxFIFOLimitSet(unsigned long ulBase, unsigned long ulLevel); +extern unsigned long I2STxFIFOLimitGet(unsigned long ulBase); +extern unsigned long I2STxFIFOLevelGet(unsigned long ulBase); +extern void I2SRxEnable(unsigned long ulBase); +extern void I2SRxDisable(unsigned long ulBase); +extern void I2SRxDataGet(unsigned long ulBase, unsigned long *pulData); +extern long I2SRxDataGetNonBlocking(unsigned long ulBase, + unsigned long *pulData); +extern void I2SRxConfigSet(unsigned long ulBase, unsigned long ulConfig); +extern void I2SRxFIFOLimitSet(unsigned long ulBase, unsigned long ulLevel); +extern unsigned long I2SRxFIFOLimitGet(unsigned long ulBase); +extern unsigned long I2SRxFIFOLevelGet(unsigned long ulBase); +extern void I2STxRxEnable(unsigned long ulBase); +extern void I2STxRxDisable(unsigned long ulBase); +extern void I2STxRxConfigSet(unsigned long ulBase, unsigned long ulConfig); +extern void I2SMasterClockSelect(unsigned long ulBase, unsigned long ulMClock); +extern void I2SIntEnable(unsigned long ulBase, unsigned long ulIntFlags); +extern void I2SIntDisable(unsigned long ulBase, unsigned long ulIntFlags); +extern unsigned long I2SIntStatus(unsigned long ulBase, tBoolean bMasked); +extern void I2SIntClear(unsigned long ulBase, unsigned long ulIntFlags); +extern void I2SIntRegister(unsigned long ulBase, void (*pfnHandler)(void)); +extern void I2SIntUnregister(unsigned long ulBase); + +//***************************************************************************** +// +// Mark the end of the C bindings section for C++ compilers. +// +//***************************************************************************** +#ifdef __cplusplus +} +#endif + +#endif // __I2S_H__ diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/interrupt.c b/bsp/lm3s_9b9x/Libraries/driverlib/interrupt.c new file mode 100644 index 0000000000000000000000000000000000000000..8bed6e81f4568e668794dc53b12df1c9bc2ac1cb --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/interrupt.c @@ -0,0 +1,725 @@ +//***************************************************************************** +// +// interrupt.c - Driver for the NVIC Interrupt Controller. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +//***************************************************************************** +// +//! \addtogroup interrupt_api +//! @{ +// +//***************************************************************************** + +#include "inc/hw_ints.h" +#include "inc/hw_nvic.h" +#include "inc/hw_types.h" +#include "driverlib/cpu.h" +#include "driverlib/debug.h" +#include "driverlib/interrupt.h" + +//***************************************************************************** +// +// This is a mapping between priority grouping encodings and the number of +// preemption priority bits. +// +//***************************************************************************** +static const unsigned long g_pulPriority[] = +{ + NVIC_APINT_PRIGROUP_0_8, NVIC_APINT_PRIGROUP_1_7, NVIC_APINT_PRIGROUP_2_6, + NVIC_APINT_PRIGROUP_3_5, NVIC_APINT_PRIGROUP_4_4, NVIC_APINT_PRIGROUP_5_3, + NVIC_APINT_PRIGROUP_6_2, NVIC_APINT_PRIGROUP_7_1 +}; + +//***************************************************************************** +// +// This is a mapping between interrupt number and the register that contains +// the priority encoding for that interrupt. +// +//***************************************************************************** +static const unsigned long g_pulRegs[] = +{ + 0, NVIC_SYS_PRI1, NVIC_SYS_PRI2, NVIC_SYS_PRI3, NVIC_PRI0, NVIC_PRI1, + NVIC_PRI2, NVIC_PRI3, NVIC_PRI4, NVIC_PRI5, NVIC_PRI6, NVIC_PRI7, + NVIC_PRI8, NVIC_PRI9, NVIC_PRI10, NVIC_PRI11, NVIC_PRI12, NVIC_PRI13 +}; + +//***************************************************************************** +// +//! \internal +//! The default interrupt handler. +//! +//! This is the default interrupt handler for all interrupts. It simply loops +//! forever so that the system state is preserved for observation by a +//! debugger. Since interrupts should be disabled before unregistering the +//! corresponding handler, this should never be called. +//! +//! \return None. +// +//***************************************************************************** +static void +IntDefaultHandler(void) +{ + // + // Go into an infinite loop. + // + while(1) + { + } +} + +//***************************************************************************** +// +// The processor vector table. +// +// This contains a list of the handlers for the various interrupt sources in +// the system. The layout of this list is defined by the hardware; assertion +// of an interrupt causes the processor to start executing directly at the +// address given in the corresponding location in this list. +// +//***************************************************************************** +#if defined(ewarm) +static __no_init void (*g_pfnRAMVectors[NUM_INTERRUPTS])(void) @ "VTABLE"; +#elif defined(sourcerygxx) +static __attribute__((section(".cs3.region-head.ram"))) +void (*g_pfnRAMVectors[NUM_INTERRUPTS])(void); +#elif defined(ccs) +#pragma DATA_SECTION(g_pfnRAMVectors, ".vtable") +void (*g_pfnRAMVectors[NUM_INTERRUPTS])(void); +#else +static __attribute__((section("vtable"))) +void (*g_pfnRAMVectors[NUM_INTERRUPTS])(void); +#endif + +//***************************************************************************** +// +//! Enables the processor interrupt. +//! +//! Allows the processor to respond to interrupts. This does not affect the +//! set of interrupts enabled in the interrupt controller; it just gates the +//! single interrupt from the controller to the processor. +//! +//! \note Previously, this function had no return value. As such, it was +//! possible to include interrupt.h and call this function without +//! having included hw_types.h. Now that the return is a +//! tBoolean, a compiler error will occur in this case. The solution +//! is to include hw_types.h before including interrupt.h. +//! +//! \return Returns \b true if interrupts were disabled when the function was +//! called or \b false if they were initially enabled. +// +//***************************************************************************** +tBoolean +IntMasterEnable(void) +{ + // + // Enable processor interrupts. + // + return(CPUcpsie()); +} + +//***************************************************************************** +// +//! Disables the processor interrupt. +//! +//! Prevents the processor from receiving interrupts. This does not affect the +//! set of interrupts enabled in the interrupt controller; it just gates the +//! single interrupt from the controller to the processor. +//! +//! \note Previously, this function had no return value. As such, it was +//! possible to include interrupt.h and call this function without +//! having included hw_types.h. Now that the return is a +//! tBoolean, a compiler error will occur in this case. The solution +//! is to include hw_types.h before including interrupt.h. +//! +//! \return Returns \b true if interrupts were already disabled when the +//! function was called or \b false if they were initially enabled. +// +//***************************************************************************** +tBoolean +IntMasterDisable(void) +{ + // + // Disable processor interrupts. + // + return(CPUcpsid()); +} + +//***************************************************************************** +// +//! Registers a function to be called when an interrupt occurs. +//! +//! \param ulInterrupt specifies the interrupt in question. +//! \param pfnHandler is a pointer to the function to be called. +//! +//! This function is used to specify the handler function to be called when the +//! given interrupt is asserted to the processor. When the interrupt occurs, +//! if it is enabled (via IntEnable()), the handler function will be called in +//! interrupt context. Since the handler function can preempt other code, care +//! must be taken to protect memory or peripherals that are accessed by the +//! handler and other non-handler code. +//! +//! \note The use of this function (directly or indirectly via a peripheral +//! driver interrupt register function) moves the interrupt vector table from +//! flash to SRAM. Therefore, care must be taken when linking the application +//! to ensure that the SRAM vector table is located at the beginning of SRAM; +//! otherwise NVIC will not look in the correct portion of memory for the +//! vector table (it requires the vector table be on a 1 kB memory alignment). +//! Normally, the SRAM vector table is so placed via the use of linker scripts; +//! some tool chains, such as the evaluation version of RV-MDK, do not support +//! linker scripts and therefore will not produce a valid executable. See the +//! discussion of compile-time versus run-time interrupt handler registration +//! in the introduction to this chapter. +//! +//! \return None. +// +//***************************************************************************** +void +IntRegister(unsigned long ulInterrupt, void (*pfnHandler)(void)) +{ + unsigned long ulIdx, ulValue; + + // + // Check the arguments. + // + ASSERT(ulInterrupt < NUM_INTERRUPTS); + + // + // Make sure that the RAM vector table is correctly aligned. + // + ASSERT(((unsigned long)g_pfnRAMVectors & 0x000003ff) == 0); + + // + // See if the RAM vector table has been initialized. + // + if(HWREG(NVIC_VTABLE) != (unsigned long)g_pfnRAMVectors) + { + // + // Copy the vector table from the beginning of FLASH to the RAM vector + // table. + // + ulValue = HWREG(NVIC_VTABLE); + for(ulIdx = 0; ulIdx < NUM_INTERRUPTS; ulIdx++) + { + g_pfnRAMVectors[ulIdx] = (void (*)(void))HWREG((ulIdx * 4) + + ulValue); + } + + // + // Point NVIC at the RAM vector table. + // + HWREG(NVIC_VTABLE) = (unsigned long)g_pfnRAMVectors; + } + + // + // Save the interrupt handler. + // + g_pfnRAMVectors[ulInterrupt] = pfnHandler; +} + +//***************************************************************************** +// +//! Unregisters the function to be called when an interrupt occurs. +//! +//! \param ulInterrupt specifies the interrupt in question. +//! +//! This function is used to indicate that no handler should be called when the +//! given interrupt is asserted to the processor. The interrupt source will be +//! automatically disabled (via IntDisable()) if necessary. +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +IntUnregister(unsigned long ulInterrupt) +{ + // + // Check the arguments. + // + ASSERT(ulInterrupt < NUM_INTERRUPTS); + + // + // Reset the interrupt handler. + // + g_pfnRAMVectors[ulInterrupt] = IntDefaultHandler; +} + +//***************************************************************************** +// +//! Sets the priority grouping of the interrupt controller. +//! +//! \param ulBits specifies the number of bits of preemptable priority. +//! +//! This function specifies the split between preemptable priority levels and +//! subpriority levels in the interrupt priority specification. The range of +//! the grouping values are dependent upon the hardware implementation; on +//! the Stellaris family, three bits are available for hardware interrupt +//! prioritization and therefore priority grouping values of three through +//! seven have the same effect. +//! +//! \return None. +// +//***************************************************************************** +void +IntPriorityGroupingSet(unsigned long ulBits) +{ + // + // Check the arguments. + // + ASSERT(ulBits < NUM_PRIORITY); + + // + // Set the priority grouping. + // + HWREG(NVIC_APINT) = NVIC_APINT_VECTKEY | g_pulPriority[ulBits]; +} + +//***************************************************************************** +// +//! Gets the priority grouping of the interrupt controller. +//! +//! This function returns the split between preemptable priority levels and +//! subpriority levels in the interrupt priority specification. +//! +//! \return The number of bits of preemptable priority. +// +//***************************************************************************** +unsigned long +IntPriorityGroupingGet(void) +{ + unsigned long ulLoop, ulValue; + + // + // Read the priority grouping. + // + ulValue = HWREG(NVIC_APINT) & NVIC_APINT_PRIGROUP_M; + + // + // Loop through the priority grouping values. + // + for(ulLoop = 0; ulLoop < NUM_PRIORITY; ulLoop++) + { + // + // Stop looping if this value matches. + // + if(ulValue == g_pulPriority[ulLoop]) + { + break; + } + } + + // + // Return the number of priority bits. + // + return(ulLoop); +} + +//***************************************************************************** +// +//! Sets the priority of an interrupt. +//! +//! \param ulInterrupt specifies the interrupt in question. +//! \param ucPriority specifies the priority of the interrupt. +//! +//! This function is used to set the priority of an interrupt. When multiple +//! interrupts are asserted simultaneously, the ones with the highest priority +//! are processed before the lower priority interrupts. Smaller numbers +//! correspond to higher interrupt priorities; priority 0 is the highest +//! interrupt priority. +//! +//! The hardware priority mechanism will only look at the upper N bits of the +//! priority level (where N is 3 for the Stellaris family), so any +//! prioritization must be performed in those bits. The remaining bits can be +//! used to sub-prioritize the interrupt sources, and may be used by the +//! hardware priority mechanism on a future part. This arrangement allows +//! priorities to migrate to different NVIC implementations without changing +//! the gross prioritization of the interrupts. +//! +//! \return None. +// +//***************************************************************************** +void +IntPrioritySet(unsigned long ulInterrupt, unsigned char ucPriority) +{ + unsigned long ulTemp; + + // + // Check the arguments. + // + ASSERT((ulInterrupt >= 4) && (ulInterrupt < NUM_INTERRUPTS)); + + // + // Set the interrupt priority. + // + ulTemp = HWREG(g_pulRegs[ulInterrupt >> 2]); + ulTemp &= ~(0xFF << (8 * (ulInterrupt & 3))); + ulTemp |= ucPriority << (8 * (ulInterrupt & 3)); + HWREG(g_pulRegs[ulInterrupt >> 2]) = ulTemp; +} + +//***************************************************************************** +// +//! Gets the priority of an interrupt. +//! +//! \param ulInterrupt specifies the interrupt in question. +//! +//! This function gets the priority of an interrupt. See IntPrioritySet() for +//! a definition of the priority value. +//! +//! \return Returns the interrupt priority, or -1 if an invalid interrupt was +//! specified. +// +//***************************************************************************** +long +IntPriorityGet(unsigned long ulInterrupt) +{ + // + // Check the arguments. + // + ASSERT((ulInterrupt >= 4) && (ulInterrupt < NUM_INTERRUPTS)); + + // + // Return the interrupt priority. + // + return((HWREG(g_pulRegs[ulInterrupt >> 2]) >> (8 * (ulInterrupt & 3))) & + 0xFF); +} + +//***************************************************************************** +// +//! Enables an interrupt. +//! +//! \param ulInterrupt specifies the interrupt to be enabled. +//! +//! The specified interrupt is enabled in the interrupt controller. Other +//! enables for the interrupt (such as at the peripheral level) are unaffected +//! by this function. +//! +//! \return None. +// +//***************************************************************************** +void +IntEnable(unsigned long ulInterrupt) +{ + // + // Check the arguments. + // + ASSERT(ulInterrupt < NUM_INTERRUPTS); + + // + // Determine the interrupt to enable. + // + if(ulInterrupt == FAULT_MPU) + { + // + // Enable the MemManage interrupt. + // + HWREG(NVIC_SYS_HND_CTRL) |= NVIC_SYS_HND_CTRL_MEM; + } + else if(ulInterrupt == FAULT_BUS) + { + // + // Enable the bus fault interrupt. + // + HWREG(NVIC_SYS_HND_CTRL) |= NVIC_SYS_HND_CTRL_BUS; + } + else if(ulInterrupt == FAULT_USAGE) + { + // + // Enable the usage fault interrupt. + // + HWREG(NVIC_SYS_HND_CTRL) |= NVIC_SYS_HND_CTRL_USAGE; + } + else if(ulInterrupt == FAULT_SYSTICK) + { + // + // Enable the System Tick interrupt. + // + HWREG(NVIC_ST_CTRL) |= NVIC_ST_CTRL_INTEN; + } + else if((ulInterrupt >= 16) && (ulInterrupt <= 47)) + { + // + // Enable the general interrupt. + // + HWREG(NVIC_EN0) = 1 << (ulInterrupt - 16); + } + else if(ulInterrupt >= 48) + { + // + // Enable the general interrupt. + // + HWREG(NVIC_EN1) = 1 << (ulInterrupt - 48); + } +} + +//***************************************************************************** +// +//! Disables an interrupt. +//! +//! \param ulInterrupt specifies the interrupt to be disabled. +//! +//! The specified interrupt is disabled in the interrupt controller. Other +//! enables for the interrupt (such as at the peripheral level) are unaffected +//! by this function. +//! +//! \return None. +// +//***************************************************************************** +void +IntDisable(unsigned long ulInterrupt) +{ + // + // Check the arguments. + // + ASSERT(ulInterrupt < NUM_INTERRUPTS); + + // + // Determine the interrupt to disable. + // + if(ulInterrupt == FAULT_MPU) + { + // + // Disable the MemManage interrupt. + // + HWREG(NVIC_SYS_HND_CTRL) &= ~(NVIC_SYS_HND_CTRL_MEM); + } + else if(ulInterrupt == FAULT_BUS) + { + // + // Disable the bus fault interrupt. + // + HWREG(NVIC_SYS_HND_CTRL) &= ~(NVIC_SYS_HND_CTRL_BUS); + } + else if(ulInterrupt == FAULT_USAGE) + { + // + // Disable the usage fault interrupt. + // + HWREG(NVIC_SYS_HND_CTRL) &= ~(NVIC_SYS_HND_CTRL_USAGE); + } + else if(ulInterrupt == FAULT_SYSTICK) + { + // + // Disable the System Tick interrupt. + // + HWREG(NVIC_ST_CTRL) &= ~(NVIC_ST_CTRL_INTEN); + } + else if((ulInterrupt >= 16) && (ulInterrupt <= 47)) + { + // + // Disable the general interrupt. + // + HWREG(NVIC_DIS0) = 1 << (ulInterrupt - 16); + } + else if(ulInterrupt >= 48) + { + // + // Disable the general interrupt. + // + HWREG(NVIC_DIS1) = 1 << (ulInterrupt - 48); + } +} + +//***************************************************************************** +// +//! Pends an interrupt. +//! +//! \param ulInterrupt specifies the interrupt to be pended. +//! +//! The specified interrupt is pended in the interrupt controller. This will +//! cause the interrupt controller to execute the corresponding interrupt +//! handler at the next available time, based on the current interrupt state +//! priorities. For example, if called by a higher priority interrupt handler, +//! the specified interrupt handler will not be called until after the current +//! interrupt handler has completed execution. The interrupt must have been +//! enabled for it to be called. +//! +//! \return None. +// +//***************************************************************************** +void +IntPendSet(unsigned long ulInterrupt) +{ + // + // Check the arguments. + // + ASSERT(ulInterrupt < NUM_INTERRUPTS); + + // + // Determine the interrupt to pend. + // + if(ulInterrupt == FAULT_NMI) + { + // + // Pend the NMI interrupt. + // + HWREG(NVIC_INT_CTRL) |= NVIC_INT_CTRL_NMI_SET; + } + else if(ulInterrupt == FAULT_PENDSV) + { + // + // Pend the PendSV interrupt. + // + HWREG(NVIC_INT_CTRL) |= NVIC_INT_CTRL_PEND_SV; + } + else if(ulInterrupt == FAULT_SYSTICK) + { + // + // Pend the SysTick interrupt. + // + HWREG(NVIC_INT_CTRL) |= NVIC_INT_CTRL_PENDSTSET; + } + else if((ulInterrupt >= 16) && (ulInterrupt <= 47)) + { + // + // Pend the general interrupt. + // + HWREG(NVIC_PEND0) = 1 << (ulInterrupt - 16); + } + else if(ulInterrupt >= 48) + { + // + // Pend the general interrupt. + // + HWREG(NVIC_PEND1) = 1 << (ulInterrupt - 48); + } +} + +//***************************************************************************** +// +//! Unpends an interrupt. +//! +//! \param ulInterrupt specifies the interrupt to be unpended. +//! +//! The specified interrupt is unpended in the interrupt controller. This will +//! cause any previously generated interrupts that have not been handled yet +//! (due to higher priority interrupts or the interrupt no having been enabled +//! yet) to be discarded. +//! +//! \return None. +// +//***************************************************************************** +void +IntPendClear(unsigned long ulInterrupt) +{ + // + // Check the arguments. + // + ASSERT(ulInterrupt < NUM_INTERRUPTS); + + // + // Determine the interrupt to unpend. + // + if(ulInterrupt == FAULT_PENDSV) + { + // + // Unpend the PendSV interrupt. + // + HWREG(NVIC_INT_CTRL) |= NVIC_INT_CTRL_UNPEND_SV; + } + else if(ulInterrupt == FAULT_SYSTICK) + { + // + // Unpend the SysTick interrupt. + // + HWREG(NVIC_INT_CTRL) |= NVIC_INT_CTRL_PENDSTCLR; + } + else if((ulInterrupt >= 16) && (ulInterrupt <= 47)) + { + // + // Unpend the general interrupt. + // + HWREG(NVIC_UNPEND0) = 1 << (ulInterrupt - 16); + } + else if(ulInterrupt >= 48) + { + // + // Unpend the general interrupt. + // + HWREG(NVIC_UNPEND1) = 1 << (ulInterrupt - 48); + } +} + +//***************************************************************************** +// +//! Sets the priority masking level +//! +//! \param ulPriorityMask is the priority level that will be masked. +//! +//! This function sets the interrupt priority masking level so that all +//! interrupts at the specified or lesser priority level is masked. This +//! can be used to globally disable a set of interrupts with priority below +//! a predetermined threshold. A value of 0 disables priority +//! masking. +//! +//! Smaller numbers correspond to higher interrupt priorities. So for example +//! a priority level mask of 4 will allow interrupts of priority level 0-3, +//! and interrupts with a numerical priority of 4 and greater will be blocked. +//! +//! The hardware priority mechanism will only look at the upper N bits of the +//! priority level (where N is 3 for the Stellaris family), so any +//! prioritization must be performed in those bits. +//! +//! \return None. +// +//***************************************************************************** +void +IntPriorityMaskSet(unsigned long ulPriorityMask) +{ + CPUbasepriSet(ulPriorityMask); +} + +//***************************************************************************** +// +//! Gets the priority masking level +//! +//! This function gets the current setting of the interrupt priority masking +//! level. The value returned is the priority level such that all interrupts +//! of that and lesser priority are masked. A value of 0 means that priority +//! masking is disabled. +//! +//! Smaller numbers correspond to higher interrupt priorities. So for example +//! a priority level mask of 4 will allow interrupts of priority level 0-3, +//! and interrupts with a numerical priority of 4 and greater will be blocked. +//! +//! The hardware priority mechanism will only look at the upper N bits of the +//! priority level (where N is 3 for the Stellaris family), so any +//! prioritization must be performed in those bits. +//! +//! \return Returns the value of the interrupt priority level mask. +// +//***************************************************************************** +unsigned long +IntPriorityMaskGet(void) +{ + return(CPUbasepriGet()); +} + +//***************************************************************************** +// +// Close the Doxygen group. +//! @} +// +//***************************************************************************** diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/interrupt.h b/bsp/lm3s_9b9x/Libraries/driverlib/interrupt.h new file mode 100644 index 0000000000000000000000000000000000000000..c13f09b30a77e410c61554689ec6cd4a77fd6bee --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/interrupt.h @@ -0,0 +1,77 @@ +//***************************************************************************** +// +// interrupt.h - Prototypes for the NVIC Interrupt Controller Driver. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +#ifndef __INTERRUPT_H__ +#define __INTERRUPT_H__ + +//***************************************************************************** +// +// If building with a C++ compiler, make all of the definitions in this header +// have a C binding. +// +//***************************************************************************** +#ifdef __cplusplus +extern "C" +{ +#endif + +//***************************************************************************** +// +// Macro to generate an interrupt priority mask based on the number of bits +// of priority supported by the hardware. +// +//***************************************************************************** +#define INT_PRIORITY_MASK ((0xFF << (8 - NUM_PRIORITY_BITS)) & 0xFF) + +//***************************************************************************** +// +// Prototypes for the APIs. +// +//***************************************************************************** +extern tBoolean IntMasterEnable(void); +extern tBoolean IntMasterDisable(void); +extern void IntRegister(unsigned long ulInterrupt, void (*pfnHandler)(void)); +extern void IntUnregister(unsigned long ulInterrupt); +extern void IntPriorityGroupingSet(unsigned long ulBits); +extern unsigned long IntPriorityGroupingGet(void); +extern void IntPrioritySet(unsigned long ulInterrupt, + unsigned char ucPriority); +extern long IntPriorityGet(unsigned long ulInterrupt); +extern void IntEnable(unsigned long ulInterrupt); +extern void IntDisable(unsigned long ulInterrupt); +extern void IntPendSet(unsigned long ulInterrupt); +extern void IntPendClear(unsigned long ulInterrupt); +extern void IntPriorityMaskSet(unsigned long ulPriorityMask); +extern unsigned long IntPriorityMaskGet(void); + +//***************************************************************************** +// +// Mark the end of the C bindings section for C++ compilers. +// +//***************************************************************************** +#ifdef __cplusplus +} +#endif + +#endif // __INTERRUPT_H__ diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/mpu.c b/bsp/lm3s_9b9x/Libraries/driverlib/mpu.c new file mode 100644 index 0000000000000000000000000000000000000000..143af02da257c337f370f70bc423124c29fb7b1b --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/mpu.c @@ -0,0 +1,446 @@ +//***************************************************************************** +// +// mpu.c - Driver for the Cortex-M3 memory protection unit (MPU). +// +// Copyright (c) 2007-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +//***************************************************************************** +// +//! \addtogroup mpu_api +//! @{ +// +//***************************************************************************** + +#include "inc/hw_ints.h" +#include "inc/hw_nvic.h" +#include "inc/hw_types.h" +#include "driverlib/debug.h" +#include "driverlib/interrupt.h" +#include "driverlib/mpu.h" + +//***************************************************************************** +// +//! Enables and configures the MPU for use. +//! +//! \param ulMPUConfig is the logical OR of the possible configurations. +//! +//! This function enables the Cortex-M3 memory protection unit. It also +//! configures the default behavior when in privileged mode and while +//! handling a hard fault or NMI. Prior to enabling the MPU, at least one +//! region must be set by calling MPURegionSet() or else by enabling the +//! default region for privileged mode by passing the +//! \b MPU_CONFIG_PRIV_DEFAULT flag to MPUEnable(). +//! Once the MPU is enabled, a memory management fault will be generated +//! for any memory access violations. +//! +//! The \e ulMPUConfig parameter should be the logical OR of any of the +//! following: +//! +//! - \b MPU_CONFIG_PRIV_DEFAULT enables the default memory map when in +//! privileged mode and when no other regions are defined. If this option +//! is not enabled, then there must be at least one valid region already +//! defined when the MPU is enabled. +//! - \b MPU_CONFIG_HARDFLT_NMI enables the MPU while in a hard fault or NMI +//! exception handler. If this option is not enabled, then the MPU is +//! disabled while in one of these exception handlers and the default +//! memory map is applied. +//! - \b MPU_CONFIG_NONE chooses none of the above options. In this case, +//! no default memory map is provided in privileged mode, and the MPU will +//! not be enabled in the fault handlers. +//! +//! \return None. +// +//***************************************************************************** +void +MPUEnable(unsigned long ulMPUConfig) +{ + // + // Check the arguments. + // + ASSERT(!(ulMPUConfig & ~(MPU_CONFIG_PRIV_DEFAULT | + MPU_CONFIG_HARDFLT_NMI))); + + // + // Set the MPU control bits according to the flags passed by the user, + // and also set the enable bit. + // + HWREG(NVIC_MPU_CTRL) = ulMPUConfig | NVIC_MPU_CTRL_ENABLE; +} + +//***************************************************************************** +// +//! Disables the MPU for use. +//! +//! This function disables the Cortex-M3 memory protection unit. When the +//! MPU is disabled, the default memory map is used and memory management +//! faults are not generated. +//! +//! \return None. +// +//***************************************************************************** +void +MPUDisable(void) +{ + // + // Turn off the MPU enable bit. + // + HWREG(NVIC_MPU_CTRL) &= ~NVIC_MPU_CTRL_ENABLE; +} + +//***************************************************************************** +// +//! Gets the count of regions supported by the MPU. +//! +//! This function is used to get the number of regions that are supported by +//! the MPU. This is the total number that are supported, including regions +//! that are already programmed. +//! +//! \return The number of memory protection regions that are available +//! for programming using MPURegionSet(). +// +//***************************************************************************** +unsigned long +MPURegionCountGet(void) +{ + // + // Read the DREGION field of the MPU type register, and mask off + // the bits of interest to get the count of regions. + // + return((HWREG(NVIC_MPU_TYPE) & NVIC_MPU_TYPE_DREGION_M) + >> NVIC_MPU_TYPE_DREGION_S); +} + +//***************************************************************************** +// +//! Enables a specific region. +//! +//! \param ulRegion is the region number to enable. +//! +//! This function is used to enable a memory protection region. The region +//! should already be set up with the MPURegionSet() function. Once enabled, +//! the memory protection rules of the region will be applied and access +//! violations will cause a memory management fault. +//! +//! \return None. +// +//***************************************************************************** +void +MPURegionEnable(unsigned long ulRegion) +{ + // + // Check the arguments. + // + ASSERT(ulRegion < 8); + + // + // Select the region to modify. + // + HWREG(NVIC_MPU_NUMBER) = ulRegion; + + // + // Modify the enable bit in the region attributes. + // + HWREG(NVIC_MPU_ATTR) |= NVIC_MPU_ATTR_ENABLE; +} + +//***************************************************************************** +// +//! Disables a specific region. +//! +//! \param ulRegion is the region number to disable. +//! +//! This function is used to disable a previously enabled memory protection +//! region. The region will remain configured if it is not overwritten with +//! another call to MPURegionSet(), and can be enabled again by calling +//! MPURegionEnable(). +//! +//! \return None. +// +//***************************************************************************** +void +MPURegionDisable(unsigned long ulRegion) +{ + // + // Check the arguments. + // + ASSERT(ulRegion < 8); + + // + // Select the region to modify. + // + HWREG(NVIC_MPU_NUMBER) = ulRegion; + + // + // Modify the enable bit in the region attributes. + // + HWREG(NVIC_MPU_ATTR) &= ~NVIC_MPU_ATTR_ENABLE; +} + +//***************************************************************************** +// +//! Sets up the access rules for a specific region. +//! +//! \param ulRegion is the region number to set up. +//! \param ulAddr is the base address of the region. It must be aligned +//! according to the size of the region specified in ulFlags. +//! \param ulFlags is a set of flags to define the attributes of the region. +//! +//! This function sets up the protection rules for a region. The region has +//! a base address and a set of attributes including the size, which must +//! be a power of 2. The base address parameter, \e ulAddr, must be aligned +//! according to the size. +//! +//! The \e ulFlags parameter is the logical OR of all of the attributes +//! of the region. It is a combination of choices for region size, +//! execute permission, read/write permissions, disabled sub-regions, +//! and a flag to determine if the region is enabled. +//! +//! The size flag determines the size of a region, and must be one of the +//! following: +//! +//! - \b MPU_RGN_SIZE_32B +//! - \b MPU_RGN_SIZE_64B +//! - \b MPU_RGN_SIZE_128B +//! - \b MPU_RGN_SIZE_256B +//! - \b MPU_RGN_SIZE_512B +//! - \b MPU_RGN_SIZE_1K +//! - \b MPU_RGN_SIZE_2K +//! - \b MPU_RGN_SIZE_4K +//! - \b MPU_RGN_SIZE_8K +//! - \b MPU_RGN_SIZE_16K +//! - \b MPU_RGN_SIZE_32K +//! - \b MPU_RGN_SIZE_64K +//! - \b MPU_RGN_SIZE_128K +//! - \b MPU_RGN_SIZE_256K +//! - \b MPU_RGN_SIZE_512K +//! - \b MPU_RGN_SIZE_1M +//! - \b MPU_RGN_SIZE_2M +//! - \b MPU_RGN_SIZE_4M +//! - \b MPU_RGN_SIZE_8M +//! - \b MPU_RGN_SIZE_16M +//! - \b MPU_RGN_SIZE_32M +//! - \b MPU_RGN_SIZE_64M +//! - \b MPU_RGN_SIZE_128M +//! - \b MPU_RGN_SIZE_256M +//! - \b MPU_RGN_SIZE_512M +//! - \b MPU_RGN_SIZE_1G +//! - \b MPU_RGN_SIZE_2G +//! - \b MPU_RGN_SIZE_4G +//! +//! The execute permission flag must be one of the following: +//! +//! - \b MPU_RGN_PERM_EXEC enables the region for execution of code +//! - \b MPU_RGN_PERM_NOEXEC disables the region for execution of code +//! +//! The read/write access permissions are applied separately for the +//! privileged and user modes. The read/write access flags must be one +//! of the following: +//! +//! - \b MPU_RGN_PERM_PRV_NO_USR_NO - no access in privileged or user mode +//! - \b MPU_RGN_PERM_PRV_RW_USR_NO - privileged read/write, user no access +//! - \b MPU_RGN_PERM_PRV_RW_USR_RO - privileged read/write, user read-only +//! - \b MPU_RGN_PERM_PRV_RW_USR_RW - privileged read/write, user read/write +//! - \b MPU_RGN_PERM_PRV_RO_USR_NO - privileged read-only, user no access +//! - \b MPU_RGN_PERM_PRV_RO_USR_RO - privileged read-only, user read-only +//! +//! The region is automatically divided into 8 equally-sized sub-regions by +//! the MPU. Sub-regions can only be used in regions of size 256 bytes +//! or larger. Any of these 8 sub-regions can be disabled. This allows +//! for creation of ``holes'' in a region which can be left open, or overlaid +//! by another region with different attributes. Any of the 8 sub-regions +//! can be disabled with a logical OR of any of the following flags: +//! +//! - \b MPU_SUB_RGN_DISABLE_0 +//! - \b MPU_SUB_RGN_DISABLE_1 +//! - \b MPU_SUB_RGN_DISABLE_2 +//! - \b MPU_SUB_RGN_DISABLE_3 +//! - \b MPU_SUB_RGN_DISABLE_4 +//! - \b MPU_SUB_RGN_DISABLE_5 +//! - \b MPU_SUB_RGN_DISABLE_6 +//! - \b MPU_SUB_RGN_DISABLE_7 +//! +//! Finally, the region can be initially enabled or disabled with one of +//! the following flags: +//! +//! - \b MPU_RGN_ENABLE +//! - \b MPU_RGN_DISABLE +//! +//! As an example, to set a region with the following attributes: size of +//! 32 KB, execution enabled, read-only for both privileged and user, one +//! sub-region disabled, and initially enabled; the \e ulFlags parameter would +//! have the following value: +//! +//! +//! (MPU_RG_SIZE_32K | MPU_RGN_PERM_EXEC | MPU_RGN_PERM_PRV_RO_USR_RO | +//! MPU_SUB_RGN_DISABLE_2 | MPU_RGN_ENABLE) +//! +//! +//! \note This function will write to multiple registers and is not protected +//! from interrupts. It is possible that an interrupt which accesses a +//! region may occur while that region is in the process of being changed. +//! The safest way to handle this is to disable a region before changing it. +//! Refer to the discussion of this in the API Detailed Description section. +//! +//! \return None. +// +//***************************************************************************** +void +MPURegionSet(unsigned long ulRegion, unsigned long ulAddr, + unsigned long ulFlags) +{ + // + // Check the arguments. + // + ASSERT(ulRegion < 8); + ASSERT((ulAddr & ~0 << (((ulFlags & NVIC_MPU_ATTR_SIZE_M) >> 1) + 1)) + == ulAddr); + + // + // Program the base address, use the region field to select the + // region at the same time. + // + HWREG(NVIC_MPU_BASE) = ulAddr | ulRegion | NVIC_MPU_BASE_VALID; + + // + // Program the region attributes. Set the TEX field and the S, C, + // and B bits to fixed values that are suitable for all Stellaris + // memory. + // + HWREG(NVIC_MPU_ATTR) = (ulFlags & ~(NVIC_MPU_ATTR_TEX_M | + NVIC_MPU_ATTR_CACHEABLE)) | + NVIC_MPU_ATTR_SHAREABLE | + NVIC_MPU_ATTR_BUFFRABLE; +} + +//***************************************************************************** +// +//! Gets the current settings for a specific region. +//! +//! \param ulRegion is the region number to get. +//! \param pulAddr points to storage for the base address of the region. +//! \param pulFlags points to the attribute flags for the region. +//! +//! This function retrieves the configuration of a specific region. The +//! meanings and format of the parameters is the same as that of the +//! MPURegionSet() function. +//! +//! This function can be used to save the configuration of a region for +//! later use with the MPURegionSet() function. The region's enable state +//! will be preserved in the attributes that are saved. +//! +//! \return None. +// +//***************************************************************************** +void +MPURegionGet(unsigned long ulRegion, unsigned long *pulAddr, + unsigned long *pulFlags) +{ + // + // Check the arguments. + // + ASSERT(ulRegion < 8); + ASSERT(pulAddr); + ASSERT(pulFlags); + + // + // Select the region to get. + // + HWREG(NVIC_MPU_NUMBER) = ulRegion; + + // + // Read and store the base address for the region. + // + *pulAddr = HWREG(NVIC_MPU_BASE); + + // + // Read and store the region attributes. + // + *pulFlags = HWREG(NVIC_MPU_ATTR); +} + +//***************************************************************************** +// +//! Registers an interrupt handler for the memory management fault. +//! +//! \param pfnHandler is a pointer to the function to be called when the +//! memory management fault occurs. +//! +//! This sets and enables the handler to be called when the MPU generates +//! a memory management fault due to a protection region access violation. +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +MPUIntRegister(void (*pfnHandler)(void)) +{ + // + // Check the arguments. + // + ASSERT(pfnHandler); + + // + // Register the interrupt handler. + // + IntRegister(FAULT_MPU, pfnHandler); + + // + // Enable the memory management fault. + // + IntEnable(FAULT_MPU); +} + +//***************************************************************************** +// +//! Unregisters an interrupt handler for the memory management fault. +//! +//! This function will disable and clear the handler to be called when a +//! memory management fault occurs. +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +MPUIntUnregister(void) +{ + // + // Disable the interrupt. + // + IntDisable(FAULT_MPU); + + // + // Unregister the interrupt handler. + // + IntUnregister(FAULT_MPU); +} + +//***************************************************************************** +// +// Close the Doxygen group. +//! @} +// +//***************************************************************************** diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/mpu.h b/bsp/lm3s_9b9x/Libraries/driverlib/mpu.h new file mode 100644 index 0000000000000000000000000000000000000000..4e05529883c7b11d4b27c2ed6c0027de4e69d333 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/mpu.h @@ -0,0 +1,147 @@ +//***************************************************************************** +// +// mpu.h - Defines and Macros for the memory protection unit. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +#ifndef __MPU_H__ +#define __MPU_H__ + +//***************************************************************************** +// +// If building with a C++ compiler, make all of the definitions in this header +// have a C binding. +// +//***************************************************************************** +#ifdef __cplusplus +extern "C" +{ +#endif + +//***************************************************************************** +// +// Flags that can be passed to MPUEnable. +// +//***************************************************************************** +#define MPU_CONFIG_PRIV_DEFAULT 4 +#define MPU_CONFIG_HARDFLT_NMI 2 +#define MPU_CONFIG_NONE 0 + +//***************************************************************************** +// +// Flags for the region size to be passed to MPURegionSet. +// +//***************************************************************************** +#define MPU_RGN_SIZE_32B (4 << 1) +#define MPU_RGN_SIZE_64B (5 << 1) +#define MPU_RGN_SIZE_128B (6 << 1) +#define MPU_RGN_SIZE_256B (7 << 1) +#define MPU_RGN_SIZE_512B (8 << 1) + +#define MPU_RGN_SIZE_1K (9 << 1) +#define MPU_RGN_SIZE_2K (10 << 1) +#define MPU_RGN_SIZE_4K (11 << 1) +#define MPU_RGN_SIZE_8K (12 << 1) +#define MPU_RGN_SIZE_16K (13 << 1) +#define MPU_RGN_SIZE_32K (14 << 1) +#define MPU_RGN_SIZE_64K (15 << 1) +#define MPU_RGN_SIZE_128K (16 << 1) +#define MPU_RGN_SIZE_256K (17 << 1) +#define MPU_RGN_SIZE_512K (18 << 1) + +#define MPU_RGN_SIZE_1M (19 << 1) +#define MPU_RGN_SIZE_2M (20 << 1) +#define MPU_RGN_SIZE_4M (21 << 1) +#define MPU_RGN_SIZE_8M (22 << 1) +#define MPU_RGN_SIZE_16M (23 << 1) +#define MPU_RGN_SIZE_32M (24 << 1) +#define MPU_RGN_SIZE_64M (25 << 1) +#define MPU_RGN_SIZE_128M (26 << 1) +#define MPU_RGN_SIZE_256M (27 << 1) +#define MPU_RGN_SIZE_512M (28 << 1) + +#define MPU_RGN_SIZE_1G (29 << 1) +#define MPU_RGN_SIZE_2G (30 << 1) +#define MPU_RGN_SIZE_4G (31 << 1) + +//***************************************************************************** +// +// Flags for the permissions to be passed to MPURegionSet. +// +//***************************************************************************** +#define MPU_RGN_PERM_EXEC 0x00000000 +#define MPU_RGN_PERM_NOEXEC 0x10000000 +#define MPU_RGN_PERM_PRV_NO_USR_NO 0x00000000 +#define MPU_RGN_PERM_PRV_RW_USR_NO 0x01000000 +#define MPU_RGN_PERM_PRV_RW_USR_RO 0x02000000 +#define MPU_RGN_PERM_PRV_RW_USR_RW 0x03000000 +#define MPU_RGN_PERM_PRV_RO_USR_NO 0x05000000 +#define MPU_RGN_PERM_PRV_RO_USR_RO 0x06000000 + +//***************************************************************************** +// +// Flags for the sub-region to be passed to MPURegionSet. +// +//***************************************************************************** +#define MPU_SUB_RGN_DISABLE_0 0x00000100 +#define MPU_SUB_RGN_DISABLE_1 0x00000200 +#define MPU_SUB_RGN_DISABLE_2 0x00000400 +#define MPU_SUB_RGN_DISABLE_3 0x00000800 +#define MPU_SUB_RGN_DISABLE_4 0x00001000 +#define MPU_SUB_RGN_DISABLE_5 0x00002000 +#define MPU_SUB_RGN_DISABLE_6 0x00004000 +#define MPU_SUB_RGN_DISABLE_7 0x00008000 + +//***************************************************************************** +// +// Flags to enable or disable a region, to be passed to MPURegionSet. +// +//***************************************************************************** +#define MPU_RGN_ENABLE 1 +#define MPU_RGN_DISABLE 0 + +//***************************************************************************** +// +// API Function prototypes +// +//***************************************************************************** +extern void MPUEnable(unsigned long ulMPUConfig); +extern void MPUDisable(void); +extern unsigned long MPURegionCountGet(void); +extern void MPURegionEnable(unsigned long ulRegion); +extern void MPURegionDisable(unsigned long ulRegion); +extern void MPURegionSet(unsigned long ulRegion, unsigned long ulAddr, + unsigned long ulFlags); +extern void MPURegionGet(unsigned long ulRegion, unsigned long *pulAddr, + unsigned long *pulFlags); +extern void MPUIntRegister(void (*pfnHandler)(void)); +extern void MPUIntUnregister(void); + +//***************************************************************************** +// +// Mark the end of the C bindings section for C++ compilers. +// +//***************************************************************************** +#ifdef __cplusplus +} +#endif + +#endif // __MPU_H__ diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/pin_map.h b/bsp/lm3s_9b9x/Libraries/driverlib/pin_map.h new file mode 100644 index 0000000000000000000000000000000000000000..ad75a86e4f75a9ce283992978b95d95805fadf81 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/pin_map.h @@ -0,0 +1,20413 @@ +//***************************************************************************** +// +// pin_map.h - Mapping of peripherals to pins for all parts. +// +// Copyright (c) 2007-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +#ifndef __PIN_MAP_H__ +#define __PIN_MAP_H__ + +//***************************************************************************** +// +// LM3S101 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S101 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0O_PORT (GPIO_PORTB_BASE) +#define C0O_PIN (GPIO_PIN_5) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define SSICLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSICLK_PORT (GPIO_PORTA_BASE) +#define SSICLK_PIN (GPIO_PIN_2) + +#define SSIFSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIFSS_PORT (GPIO_PORTA_BASE) +#define SSIFSS_PIN (GPIO_PIN_3) + +#define SSIRX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIRX_PORT (GPIO_PORTA_BASE) +#define SSIRX_PIN (GPIO_PIN_4) + +#define SSITX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSITX_PORT (GPIO_PORTA_BASE) +#define SSITX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define 32KHZ_PERIPH (SYSCTL_PERIPH_GPIOB) +#define 32KHZ_PORT (GPIO_PORTB_BASE) +#define 32KHZ_PIN (GPIO_PIN_1) + +#endif // PART_LM3S101 + +//***************************************************************************** +// +// LM3S102 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S102 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0O_PORT (GPIO_PORTB_BASE) +#define C0O_PIN (GPIO_PIN_5) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP1_PORT (GPIO_PORTB_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define I2CSCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSCL_PORT (GPIO_PORTB_BASE) +#define I2CSCL_PIN (GPIO_PIN_2) + +#define I2CSDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSDA_PORT (GPIO_PORTB_BASE) +#define I2CSDA_PIN (GPIO_PIN_3) + +#define SSICLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSICLK_PORT (GPIO_PORTA_BASE) +#define SSICLK_PIN (GPIO_PIN_2) + +#define SSIFSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIFSS_PORT (GPIO_PORTA_BASE) +#define SSIFSS_PIN (GPIO_PIN_3) + +#define SSIRX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIRX_PORT (GPIO_PORTA_BASE) +#define SSIRX_PIN (GPIO_PIN_4) + +#define SSITX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSITX_PORT (GPIO_PORTA_BASE) +#define SSITX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define 32KHZ_PERIPH (SYSCTL_PERIPH_GPIOB) +#define 32KHZ_PORT (GPIO_PORTB_BASE) +#define 32KHZ_PIN (GPIO_PIN_1) + +#endif // PART_LM3S102 + +//***************************************************************************** +// +// LM3S300 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S300 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOD) +#define C0O_PORT (GPIO_PORTD_BASE) +#define C0O_PIN (GPIO_PIN_7) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1O_PORT (GPIO_PORTC_BASE) +#define C1O_PIN (GPIO_PIN_5) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define C2O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2O_PORT (GPIO_PORTC_BASE) +#define C2O_PIN (GPIO_PIN_6) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_7) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP0_PORT (GPIO_PORTD_BASE) +#define CCP0_PIN (GPIO_PIN_4) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP1_PORT (GPIO_PORTE_BASE) +#define CCP1_PIN (GPIO_PIN_3) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP2_PORT (GPIO_PORTD_BASE) +#define CCP2_PIN (GPIO_PIN_5) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP3_PORT (GPIO_PORTE_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP4_PORT (GPIO_PORTE_BASE) +#define CCP4_PIN (GPIO_PIN_2) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP5_PORT (GPIO_PORTE_BASE) +#define CCP5_PIN (GPIO_PIN_5) + +#define I2CSCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSCL_PORT (GPIO_PORTB_BASE) +#define I2CSCL_PIN (GPIO_PIN_2) + +#define I2CSDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSDA_PORT (GPIO_PORTB_BASE) +#define I2CSDA_PIN (GPIO_PIN_3) + +#define SSICLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSICLK_PORT (GPIO_PORTA_BASE) +#define SSICLK_PIN (GPIO_PIN_2) + +#define SSIFSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIFSS_PORT (GPIO_PORTA_BASE) +#define SSIFSS_PIN (GPIO_PIN_3) + +#define SSIRX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIRX_PORT (GPIO_PORTA_BASE) +#define SSIRX_PIN (GPIO_PIN_4) + +#define SSITX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSITX_PORT (GPIO_PORTA_BASE) +#define SSITX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S300 + +//***************************************************************************** +// +// LM3S301 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S301 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOD) +#define C0O_PORT (GPIO_PORTD_BASE) +#define C0O_PIN (GPIO_PIN_7) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1O_PORT (GPIO_PORTC_BASE) +#define C1O_PIN (GPIO_PIN_5) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP2_PORT (GPIO_PORTD_BASE) +#define CCP2_PIN (GPIO_PIN_5) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define SSICLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSICLK_PORT (GPIO_PORTA_BASE) +#define SSICLK_PIN (GPIO_PIN_2) + +#define SSIFSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIFSS_PORT (GPIO_PORTA_BASE) +#define SSIFSS_PIN (GPIO_PIN_3) + +#define SSIRX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIRX_PORT (GPIO_PORTA_BASE) +#define SSIRX_PIN (GPIO_PIN_4) + +#define SSITX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSITX_PORT (GPIO_PORTA_BASE) +#define SSITX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S301 + +//***************************************************************************** +// +// LM3S308 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S308 + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP1_PORT (GPIO_PORTC_BASE) +#define CCP1_PIN (GPIO_PIN_5) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP5_PORT (GPIO_PORTB_BASE) +#define CCP5_PIN (GPIO_PIN_5) + +#define I2CSCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSCL_PORT (GPIO_PORTB_BASE) +#define I2CSCL_PIN (GPIO_PIN_2) + +#define I2CSDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSDA_PORT (GPIO_PORTB_BASE) +#define I2CSDA_PIN (GPIO_PIN_3) + +#define SSICLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSICLK_PORT (GPIO_PORTA_BASE) +#define SSICLK_PIN (GPIO_PIN_2) + +#define SSIFSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIFSS_PORT (GPIO_PORTA_BASE) +#define SSIFSS_PIN (GPIO_PIN_3) + +#define SSIRX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIRX_PORT (GPIO_PORTA_BASE) +#define SSIRX_PIN (GPIO_PIN_4) + +#define SSITX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSITX_PORT (GPIO_PORTA_BASE) +#define SSITX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S308 + +//***************************************************************************** +// +// LM3S310 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S310 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOD) +#define C0O_PORT (GPIO_PORTD_BASE) +#define C0O_PIN (GPIO_PIN_7) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1O_PORT (GPIO_PORTC_BASE) +#define C1O_PIN (GPIO_PIN_5) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define C2O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2O_PORT (GPIO_PORTC_BASE) +#define C2O_PIN (GPIO_PIN_6) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_7) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP0_PORT (GPIO_PORTD_BASE) +#define CCP0_PIN (GPIO_PIN_4) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP1_PORT (GPIO_PORTE_BASE) +#define CCP1_PIN (GPIO_PIN_3) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP2_PORT (GPIO_PORTD_BASE) +#define CCP2_PIN (GPIO_PIN_5) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP3_PORT (GPIO_PORTE_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP4_PORT (GPIO_PORTE_BASE) +#define CCP4_PIN (GPIO_PIN_2) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP5_PORT (GPIO_PORTE_BASE) +#define CCP5_PIN (GPIO_PIN_5) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM2_PORT (GPIO_PORTB_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM3_PORT (GPIO_PORTB_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM4_PORT (GPIO_PORTE_BASE) +#define PWM4_PIN (GPIO_PIN_0) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM5_PORT (GPIO_PORTE_BASE) +#define PWM5_PIN (GPIO_PIN_1) + +#define SSICLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSICLK_PORT (GPIO_PORTA_BASE) +#define SSICLK_PIN (GPIO_PIN_2) + +#define SSIFSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIFSS_PORT (GPIO_PORTA_BASE) +#define SSIFSS_PIN (GPIO_PIN_3) + +#define SSIRX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIRX_PORT (GPIO_PORTA_BASE) +#define SSIRX_PIN (GPIO_PIN_4) + +#define SSITX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSITX_PORT (GPIO_PORTA_BASE) +#define SSITX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S310 + +//***************************************************************************** +// +// LM3S315 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S315 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOD) +#define C0O_PORT (GPIO_PORTD_BASE) +#define C0O_PIN (GPIO_PIN_7) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP1_PORT (GPIO_PORTC_BASE) +#define CCP1_PIN (GPIO_PIN_5) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP2_PORT (GPIO_PORTD_BASE) +#define CCP2_PIN (GPIO_PIN_5) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP5_PORT (GPIO_PORTB_BASE) +#define CCP5_PIN (GPIO_PIN_5) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define SSICLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSICLK_PORT (GPIO_PORTA_BASE) +#define SSICLK_PIN (GPIO_PIN_2) + +#define SSIFSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIFSS_PORT (GPIO_PORTA_BASE) +#define SSIFSS_PIN (GPIO_PIN_3) + +#define SSIRX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIRX_PORT (GPIO_PORTA_BASE) +#define SSIRX_PIN (GPIO_PIN_4) + +#define SSITX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSITX_PORT (GPIO_PORTA_BASE) +#define SSITX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S315 + +//***************************************************************************** +// +// LM3S316 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S316 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOD) +#define C0O_PORT (GPIO_PORTD_BASE) +#define C0O_PIN (GPIO_PIN_7) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP0_PORT (GPIO_PORTD_BASE) +#define CCP0_PIN (GPIO_PIN_4) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP1_PORT (GPIO_PORTC_BASE) +#define CCP1_PIN (GPIO_PIN_5) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP2_PORT (GPIO_PORTD_BASE) +#define CCP2_PIN (GPIO_PIN_5) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP5_PORT (GPIO_PORTB_BASE) +#define CCP5_PIN (GPIO_PIN_5) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2CSCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSCL_PORT (GPIO_PORTB_BASE) +#define I2CSCL_PIN (GPIO_PIN_2) + +#define I2CSDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSDA_PORT (GPIO_PORTB_BASE) +#define I2CSDA_PIN (GPIO_PIN_3) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM2_PORT (GPIO_PORTB_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM3_PORT (GPIO_PORTB_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define SSICLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSICLK_PORT (GPIO_PORTA_BASE) +#define SSICLK_PIN (GPIO_PIN_2) + +#define SSIFSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIFSS_PORT (GPIO_PORTA_BASE) +#define SSIFSS_PIN (GPIO_PIN_3) + +#define SSIRX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIRX_PORT (GPIO_PORTA_BASE) +#define SSIRX_PIN (GPIO_PIN_4) + +#define SSITX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSITX_PORT (GPIO_PORTA_BASE) +#define SSITX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S316 + +//***************************************************************************** +// +// LM3S317 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S317 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0O_PORT (GPIO_PORTB_BASE) +#define C0O_PIN (GPIO_PIN_5) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP0_PORT (GPIO_PORTD_BASE) +#define CCP0_PIN (GPIO_PIN_4) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP1_PORT (GPIO_PORTC_BASE) +#define CCP1_PIN (GPIO_PIN_5) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP2_PORT (GPIO_PORTD_BASE) +#define CCP2_PIN (GPIO_PIN_5) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOB) +#define FAULT_PORT (GPIO_PORTB_BASE) +#define FAULT_PIN (GPIO_PIN_3) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM2_PORT (GPIO_PORTB_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM3_PORT (GPIO_PORTB_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM4_PORT (GPIO_PORTE_BASE) +#define PWM4_PIN (GPIO_PIN_0) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM5_PORT (GPIO_PORTE_BASE) +#define PWM5_PIN (GPIO_PIN_1) + +#define SSICLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSICLK_PORT (GPIO_PORTA_BASE) +#define SSICLK_PIN (GPIO_PIN_2) + +#define SSIFSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIFSS_PORT (GPIO_PORTA_BASE) +#define SSIFSS_PIN (GPIO_PIN_3) + +#define SSIRX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIRX_PORT (GPIO_PORTA_BASE) +#define SSIRX_PIN (GPIO_PIN_4) + +#define SSITX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSITX_PORT (GPIO_PORTA_BASE) +#define SSITX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S317 + +//***************************************************************************** +// +// LM3S328 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S328 + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP1_PORT (GPIO_PORTC_BASE) +#define CCP1_PIN (GPIO_PIN_5) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP5_PORT (GPIO_PORTB_BASE) +#define CCP5_PIN (GPIO_PIN_5) + +#define I2CSCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSCL_PORT (GPIO_PORTB_BASE) +#define I2CSCL_PIN (GPIO_PIN_2) + +#define I2CSDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSDA_PORT (GPIO_PORTB_BASE) +#define I2CSDA_PIN (GPIO_PIN_3) + +#define SSICLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSICLK_PORT (GPIO_PORTA_BASE) +#define SSICLK_PIN (GPIO_PIN_2) + +#define SSIFSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIFSS_PORT (GPIO_PORTA_BASE) +#define SSIFSS_PIN (GPIO_PIN_3) + +#define SSIRX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIRX_PORT (GPIO_PORTA_BASE) +#define SSIRX_PIN (GPIO_PIN_4) + +#define SSITX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSITX_PORT (GPIO_PORTA_BASE) +#define SSITX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S328 + +//***************************************************************************** +// +// LM3S600 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S600 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOD) +#define C0O_PORT (GPIO_PORTD_BASE) +#define C0O_PIN (GPIO_PIN_7) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1O_PORT (GPIO_PORTC_BASE) +#define C1O_PIN (GPIO_PIN_5) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define C2O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2O_PORT (GPIO_PORTC_BASE) +#define C2O_PIN (GPIO_PIN_6) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_7) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP0_PORT (GPIO_PORTD_BASE) +#define CCP0_PIN (GPIO_PIN_4) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP1_PORT (GPIO_PORTE_BASE) +#define CCP1_PIN (GPIO_PIN_3) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP2_PORT (GPIO_PORTD_BASE) +#define CCP2_PIN (GPIO_PIN_5) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP3_PORT (GPIO_PORTE_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP4_PORT (GPIO_PORTE_BASE) +#define CCP4_PIN (GPIO_PIN_2) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP5_PORT (GPIO_PORTE_BASE) +#define CCP5_PIN (GPIO_PIN_5) + +#define I2CSCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSCL_PORT (GPIO_PORTB_BASE) +#define I2CSCL_PIN (GPIO_PIN_2) + +#define I2CSDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSDA_PORT (GPIO_PORTB_BASE) +#define I2CSDA_PIN (GPIO_PIN_3) + +#define SSICLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSICLK_PORT (GPIO_PORTA_BASE) +#define SSICLK_PIN (GPIO_PIN_2) + +#define SSIFSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIFSS_PORT (GPIO_PORTA_BASE) +#define SSIFSS_PIN (GPIO_PIN_3) + +#define SSIRX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIRX_PORT (GPIO_PORTA_BASE) +#define SSIRX_PIN (GPIO_PIN_4) + +#define SSITX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSITX_PORT (GPIO_PORTA_BASE) +#define SSITX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S600 + +//***************************************************************************** +// +// LM3S601 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S601 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C0O_PORT (GPIO_PORTC_BASE) +#define C0O_PIN (GPIO_PIN_5) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_7) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP0_PORT (GPIO_PORTD_BASE) +#define CCP0_PIN (GPIO_PIN_4) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP1_PORT (GPIO_PORTE_BASE) +#define CCP1_PIN (GPIO_PIN_3) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP2_PORT (GPIO_PORTD_BASE) +#define CCP2_PIN (GPIO_PIN_5) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP3_PORT (GPIO_PORTE_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP4_PORT (GPIO_PORTE_BASE) +#define CCP4_PIN (GPIO_PIN_2) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP5_PORT (GPIO_PORTE_BASE) +#define CCP5_PIN (GPIO_PIN_5) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2CSCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSCL_PORT (GPIO_PORTB_BASE) +#define I2CSCL_PIN (GPIO_PIN_2) + +#define I2CSDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSDA_PORT (GPIO_PORTB_BASE) +#define I2CSDA_PIN (GPIO_PIN_3) + +#define IDX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define IDX_PORT (GPIO_PORTD_BASE) +#define IDX_PIN (GPIO_PIN_7) + +#define PHA_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHA_PORT (GPIO_PORTC_BASE) +#define PHA_PIN (GPIO_PIN_4) + +#define PHB_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHB_PORT (GPIO_PORTC_BASE) +#define PHB_PIN (GPIO_PIN_6) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM2_PORT (GPIO_PORTB_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM3_PORT (GPIO_PORTB_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM4_PORT (GPIO_PORTE_BASE) +#define PWM4_PIN (GPIO_PIN_0) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM5_PORT (GPIO_PORTE_BASE) +#define PWM5_PIN (GPIO_PIN_1) + +#define SSICLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSICLK_PORT (GPIO_PORTA_BASE) +#define SSICLK_PIN (GPIO_PIN_2) + +#define SSIFSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIFSS_PORT (GPIO_PORTA_BASE) +#define SSIFSS_PIN (GPIO_PIN_3) + +#define SSIRX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIRX_PORT (GPIO_PORTA_BASE) +#define SSIRX_PIN (GPIO_PIN_4) + +#define SSITX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSITX_PORT (GPIO_PORTA_BASE) +#define SSITX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S601 + +//***************************************************************************** +// +// LM3S608 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S608 + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP1_PORT (GPIO_PORTC_BASE) +#define CCP1_PIN (GPIO_PIN_5) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP5_PORT (GPIO_PORTB_BASE) +#define CCP5_PIN (GPIO_PIN_5) + +#define I2CSCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSCL_PORT (GPIO_PORTB_BASE) +#define I2CSCL_PIN (GPIO_PIN_2) + +#define I2CSDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSDA_PORT (GPIO_PORTB_BASE) +#define I2CSDA_PIN (GPIO_PIN_3) + +#define SSICLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSICLK_PORT (GPIO_PORTA_BASE) +#define SSICLK_PIN (GPIO_PIN_2) + +#define SSIFSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIFSS_PORT (GPIO_PORTA_BASE) +#define SSIFSS_PIN (GPIO_PIN_3) + +#define SSIRX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIRX_PORT (GPIO_PORTA_BASE) +#define SSIRX_PIN (GPIO_PIN_4) + +#define SSITX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSITX_PORT (GPIO_PORTA_BASE) +#define SSITX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S608 + +//***************************************************************************** +// +// LM3S610 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S610 + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP0_PORT (GPIO_PORTD_BASE) +#define CCP0_PIN (GPIO_PIN_4) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP1_PORT (GPIO_PORTE_BASE) +#define CCP1_PIN (GPIO_PIN_3) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP2_PORT (GPIO_PORTD_BASE) +#define CCP2_PIN (GPIO_PIN_5) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP5_PORT (GPIO_PORTB_BASE) +#define CCP5_PIN (GPIO_PIN_5) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2CSCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSCL_PORT (GPIO_PORTB_BASE) +#define I2CSCL_PIN (GPIO_PIN_2) + +#define I2CSDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSDA_PORT (GPIO_PORTB_BASE) +#define I2CSDA_PIN (GPIO_PIN_3) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM2_PORT (GPIO_PORTB_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM3_PORT (GPIO_PORTB_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM4_PORT (GPIO_PORTE_BASE) +#define PWM4_PIN (GPIO_PIN_0) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM5_PORT (GPIO_PORTE_BASE) +#define PWM5_PIN (GPIO_PIN_1) + +#define SSICLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSICLK_PORT (GPIO_PORTA_BASE) +#define SSICLK_PIN (GPIO_PIN_2) + +#define SSIFSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIFSS_PORT (GPIO_PORTA_BASE) +#define SSIFSS_PIN (GPIO_PIN_3) + +#define SSIRX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIRX_PORT (GPIO_PORTA_BASE) +#define SSIRX_PIN (GPIO_PIN_4) + +#define SSITX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSITX_PORT (GPIO_PORTA_BASE) +#define SSITX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S610 + +//***************************************************************************** +// +// LM3S611 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S611 + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP0_PORT (GPIO_PORTD_BASE) +#define CCP0_PIN (GPIO_PIN_4) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP1_PORT (GPIO_PORTC_BASE) +#define CCP1_PIN (GPIO_PIN_5) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP2_PORT (GPIO_PORTD_BASE) +#define CCP2_PIN (GPIO_PIN_5) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP5_PORT (GPIO_PORTB_BASE) +#define CCP5_PIN (GPIO_PIN_5) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2CSCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSCL_PORT (GPIO_PORTB_BASE) +#define I2CSCL_PIN (GPIO_PIN_2) + +#define I2CSDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSDA_PORT (GPIO_PORTB_BASE) +#define I2CSDA_PIN (GPIO_PIN_3) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM2_PORT (GPIO_PORTB_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM3_PORT (GPIO_PORTB_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM4_PORT (GPIO_PORTE_BASE) +#define PWM4_PIN (GPIO_PIN_0) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM5_PORT (GPIO_PORTE_BASE) +#define PWM5_PIN (GPIO_PIN_1) + +#define SSICLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSICLK_PORT (GPIO_PORTA_BASE) +#define SSICLK_PIN (GPIO_PIN_2) + +#define SSIFSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIFSS_PORT (GPIO_PORTA_BASE) +#define SSIFSS_PIN (GPIO_PIN_3) + +#define SSIRX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIRX_PORT (GPIO_PORTA_BASE) +#define SSIRX_PIN (GPIO_PIN_4) + +#define SSITX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSITX_PORT (GPIO_PORTA_BASE) +#define SSITX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S611 + +//***************************************************************************** +// +// LM3S612 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S612 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOD) +#define C0O_PORT (GPIO_PORTD_BASE) +#define C0O_PIN (GPIO_PIN_7) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP1_PORT (GPIO_PORTE_BASE) +#define CCP1_PIN (GPIO_PIN_3) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP2_PORT (GPIO_PORTD_BASE) +#define CCP2_PIN (GPIO_PIN_5) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP5_PORT (GPIO_PORTB_BASE) +#define CCP5_PIN (GPIO_PIN_5) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2CSCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSCL_PORT (GPIO_PORTB_BASE) +#define I2CSCL_PIN (GPIO_PIN_2) + +#define I2CSDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSDA_PORT (GPIO_PORTB_BASE) +#define I2CSDA_PIN (GPIO_PIN_3) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define SSICLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSICLK_PORT (GPIO_PORTA_BASE) +#define SSICLK_PIN (GPIO_PIN_2) + +#define SSIFSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIFSS_PORT (GPIO_PORTA_BASE) +#define SSIFSS_PIN (GPIO_PIN_3) + +#define SSIRX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIRX_PORT (GPIO_PORTA_BASE) +#define SSIRX_PIN (GPIO_PIN_4) + +#define SSITX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSITX_PORT (GPIO_PORTA_BASE) +#define SSITX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S612 + +//***************************************************************************** +// +// LM3S613 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S613 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOD) +#define C0O_PORT (GPIO_PORTD_BASE) +#define C0O_PIN (GPIO_PIN_7) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP0_PORT (GPIO_PORTD_BASE) +#define CCP0_PIN (GPIO_PIN_4) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP1_PORT (GPIO_PORTC_BASE) +#define CCP1_PIN (GPIO_PIN_5) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP2_PORT (GPIO_PORTD_BASE) +#define CCP2_PIN (GPIO_PIN_5) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP5_PORT (GPIO_PORTB_BASE) +#define CCP5_PIN (GPIO_PIN_5) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2CSCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSCL_PORT (GPIO_PORTB_BASE) +#define I2CSCL_PIN (GPIO_PIN_2) + +#define I2CSDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSDA_PORT (GPIO_PORTB_BASE) +#define I2CSDA_PIN (GPIO_PIN_3) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM2_PORT (GPIO_PORTB_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM3_PORT (GPIO_PORTB_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define SSICLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSICLK_PORT (GPIO_PORTA_BASE) +#define SSICLK_PIN (GPIO_PIN_2) + +#define SSIFSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIFSS_PORT (GPIO_PORTA_BASE) +#define SSIFSS_PIN (GPIO_PIN_3) + +#define SSIRX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIRX_PORT (GPIO_PORTA_BASE) +#define SSIRX_PIN (GPIO_PIN_4) + +#define SSITX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSITX_PORT (GPIO_PORTA_BASE) +#define SSITX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S613 + +//***************************************************************************** +// +// LM3S615 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S615 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOD) +#define C0O_PORT (GPIO_PORTD_BASE) +#define C0O_PIN (GPIO_PIN_7) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1O_PORT (GPIO_PORTC_BASE) +#define C1O_PIN (GPIO_PIN_5) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_7) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP0_PORT (GPIO_PORTD_BASE) +#define CCP0_PIN (GPIO_PIN_4) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP1_PORT (GPIO_PORTE_BASE) +#define CCP1_PIN (GPIO_PIN_3) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP2_PORT (GPIO_PORTD_BASE) +#define CCP2_PIN (GPIO_PIN_5) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP4_PORT (GPIO_PORTE_BASE) +#define CCP4_PIN (GPIO_PIN_2) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2CSCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSCL_PORT (GPIO_PORTB_BASE) +#define I2CSCL_PIN (GPIO_PIN_2) + +#define I2CSDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSDA_PORT (GPIO_PORTB_BASE) +#define I2CSDA_PIN (GPIO_PIN_3) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM2_PORT (GPIO_PORTB_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM3_PORT (GPIO_PORTB_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM4_PORT (GPIO_PORTE_BASE) +#define PWM4_PIN (GPIO_PIN_0) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM5_PORT (GPIO_PORTE_BASE) +#define PWM5_PIN (GPIO_PIN_1) + +#define SSICLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSICLK_PORT (GPIO_PORTA_BASE) +#define SSICLK_PIN (GPIO_PIN_2) + +#define SSIFSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIFSS_PORT (GPIO_PORTA_BASE) +#define SSIFSS_PIN (GPIO_PIN_3) + +#define SSIRX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIRX_PORT (GPIO_PORTA_BASE) +#define SSIRX_PIN (GPIO_PIN_4) + +#define SSITX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSITX_PORT (GPIO_PORTA_BASE) +#define SSITX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S615 + +//***************************************************************************** +// +// LM3S617 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S617 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0O_PORT (GPIO_PORTB_BASE) +#define C0O_PIN (GPIO_PIN_5) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP0_PORT (GPIO_PORTD_BASE) +#define CCP0_PIN (GPIO_PIN_4) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP1_PORT (GPIO_PORTC_BASE) +#define CCP1_PIN (GPIO_PIN_5) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP2_PORT (GPIO_PORTD_BASE) +#define CCP2_PIN (GPIO_PIN_5) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOB) +#define FAULT_PORT (GPIO_PORTB_BASE) +#define FAULT_PIN (GPIO_PIN_3) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM2_PORT (GPIO_PORTB_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM3_PORT (GPIO_PORTB_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM4_PORT (GPIO_PORTE_BASE) +#define PWM4_PIN (GPIO_PIN_0) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM5_PORT (GPIO_PORTE_BASE) +#define PWM5_PIN (GPIO_PIN_1) + +#define SSICLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSICLK_PORT (GPIO_PORTA_BASE) +#define SSICLK_PIN (GPIO_PIN_2) + +#define SSIFSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIFSS_PORT (GPIO_PORTA_BASE) +#define SSIFSS_PIN (GPIO_PIN_3) + +#define SSIRX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIRX_PORT (GPIO_PORTA_BASE) +#define SSIRX_PIN (GPIO_PIN_4) + +#define SSITX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSITX_PORT (GPIO_PORTA_BASE) +#define SSITX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S617 + +//***************************************************************************** +// +// LM3S618 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S618 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0O_PORT (GPIO_PORTB_BASE) +#define C0O_PIN (GPIO_PIN_5) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP0_PORT (GPIO_PORTD_BASE) +#define CCP0_PIN (GPIO_PIN_4) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP1_PORT (GPIO_PORTC_BASE) +#define CCP1_PIN (GPIO_PIN_5) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP2_PORT (GPIO_PORTD_BASE) +#define CCP2_PIN (GPIO_PIN_5) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOB) +#define FAULT_PORT (GPIO_PORTB_BASE) +#define FAULT_PIN (GPIO_PIN_3) + +#define IDX_PERIPH (SYSCTL_PERIPH_GPIOB) +#define IDX_PORT (GPIO_PORTB_BASE) +#define IDX_PIN (GPIO_PIN_2) + +#define PHA_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHA_PORT (GPIO_PORTC_BASE) +#define PHA_PIN (GPIO_PIN_4) + +#define PHB_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHB_PORT (GPIO_PORTC_BASE) +#define PHB_PIN (GPIO_PIN_6) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM2_PORT (GPIO_PORTB_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM3_PORT (GPIO_PORTB_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM4_PORT (GPIO_PORTE_BASE) +#define PWM4_PIN (GPIO_PIN_0) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM5_PORT (GPIO_PORTE_BASE) +#define PWM5_PIN (GPIO_PIN_1) + +#define SSICLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSICLK_PORT (GPIO_PORTA_BASE) +#define SSICLK_PIN (GPIO_PIN_2) + +#define SSIFSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIFSS_PORT (GPIO_PORTA_BASE) +#define SSIFSS_PIN (GPIO_PIN_3) + +#define SSIRX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIRX_PORT (GPIO_PORTA_BASE) +#define SSIRX_PIN (GPIO_PIN_4) + +#define SSITX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSITX_PORT (GPIO_PORTA_BASE) +#define SSITX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S618 + +//***************************************************************************** +// +// LM3S628 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S628 + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP1_PORT (GPIO_PORTC_BASE) +#define CCP1_PIN (GPIO_PIN_5) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define I2CSCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSCL_PORT (GPIO_PORTB_BASE) +#define I2CSCL_PIN (GPIO_PIN_2) + +#define I2CSDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSDA_PORT (GPIO_PORTB_BASE) +#define I2CSDA_PIN (GPIO_PIN_3) + +#define SSICLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSICLK_PORT (GPIO_PORTA_BASE) +#define SSICLK_PIN (GPIO_PIN_2) + +#define SSIFSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIFSS_PORT (GPIO_PORTA_BASE) +#define SSIFSS_PIN (GPIO_PIN_3) + +#define SSIRX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIRX_PORT (GPIO_PORTA_BASE) +#define SSIRX_PIN (GPIO_PIN_4) + +#define SSITX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSITX_PORT (GPIO_PORTA_BASE) +#define SSITX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S628 + +//***************************************************************************** +// +// LM3S800 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S800 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOD) +#define C0O_PORT (GPIO_PORTD_BASE) +#define C0O_PIN (GPIO_PIN_7) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1O_PORT (GPIO_PORTC_BASE) +#define C1O_PIN (GPIO_PIN_5) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define C2O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2O_PORT (GPIO_PORTC_BASE) +#define C2O_PIN (GPIO_PIN_6) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_7) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP0_PORT (GPIO_PORTD_BASE) +#define CCP0_PIN (GPIO_PIN_4) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP1_PORT (GPIO_PORTE_BASE) +#define CCP1_PIN (GPIO_PIN_3) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP2_PORT (GPIO_PORTD_BASE) +#define CCP2_PIN (GPIO_PIN_5) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP3_PORT (GPIO_PORTE_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP4_PORT (GPIO_PORTE_BASE) +#define CCP4_PIN (GPIO_PIN_2) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP5_PORT (GPIO_PORTE_BASE) +#define CCP5_PIN (GPIO_PIN_5) + +#define I2CSCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSCL_PORT (GPIO_PORTB_BASE) +#define I2CSCL_PIN (GPIO_PIN_2) + +#define I2CSDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSDA_PORT (GPIO_PORTB_BASE) +#define I2CSDA_PIN (GPIO_PIN_3) + +#define SSICLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSICLK_PORT (GPIO_PORTA_BASE) +#define SSICLK_PIN (GPIO_PIN_2) + +#define SSIFSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIFSS_PORT (GPIO_PORTA_BASE) +#define SSIFSS_PIN (GPIO_PIN_3) + +#define SSIRX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIRX_PORT (GPIO_PORTA_BASE) +#define SSIRX_PIN (GPIO_PIN_4) + +#define SSITX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSITX_PORT (GPIO_PORTA_BASE) +#define SSITX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S800 + +//***************************************************************************** +// +// LM3S801 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S801 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C0O_PORT (GPIO_PORTC_BASE) +#define C0O_PIN (GPIO_PIN_5) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_7) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP0_PORT (GPIO_PORTD_BASE) +#define CCP0_PIN (GPIO_PIN_4) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP1_PORT (GPIO_PORTE_BASE) +#define CCP1_PIN (GPIO_PIN_3) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP2_PORT (GPIO_PORTD_BASE) +#define CCP2_PIN (GPIO_PIN_5) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP3_PORT (GPIO_PORTE_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP4_PORT (GPIO_PORTE_BASE) +#define CCP4_PIN (GPIO_PIN_2) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP5_PORT (GPIO_PORTE_BASE) +#define CCP5_PIN (GPIO_PIN_5) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2CSCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSCL_PORT (GPIO_PORTB_BASE) +#define I2CSCL_PIN (GPIO_PIN_2) + +#define I2CSDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSDA_PORT (GPIO_PORTB_BASE) +#define I2CSDA_PIN (GPIO_PIN_3) + +#define IDX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define IDX_PORT (GPIO_PORTD_BASE) +#define IDX_PIN (GPIO_PIN_7) + +#define PHA_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHA_PORT (GPIO_PORTC_BASE) +#define PHA_PIN (GPIO_PIN_4) + +#define PHB_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHB_PORT (GPIO_PORTC_BASE) +#define PHB_PIN (GPIO_PIN_6) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM2_PORT (GPIO_PORTB_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM3_PORT (GPIO_PORTB_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM4_PORT (GPIO_PORTE_BASE) +#define PWM4_PIN (GPIO_PIN_0) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM5_PORT (GPIO_PORTE_BASE) +#define PWM5_PIN (GPIO_PIN_1) + +#define SSICLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSICLK_PORT (GPIO_PORTA_BASE) +#define SSICLK_PIN (GPIO_PIN_2) + +#define SSIFSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIFSS_PORT (GPIO_PORTA_BASE) +#define SSIFSS_PIN (GPIO_PIN_3) + +#define SSIRX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIRX_PORT (GPIO_PORTA_BASE) +#define SSIRX_PIN (GPIO_PIN_4) + +#define SSITX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSITX_PORT (GPIO_PORTA_BASE) +#define SSITX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S801 + +//***************************************************************************** +// +// LM3S808 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S808 + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP1_PORT (GPIO_PORTC_BASE) +#define CCP1_PIN (GPIO_PIN_5) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP5_PORT (GPIO_PORTB_BASE) +#define CCP5_PIN (GPIO_PIN_5) + +#define I2CSCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSCL_PORT (GPIO_PORTB_BASE) +#define I2CSCL_PIN (GPIO_PIN_2) + +#define I2CSDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSDA_PORT (GPIO_PORTB_BASE) +#define I2CSDA_PIN (GPIO_PIN_3) + +#define SSICLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSICLK_PORT (GPIO_PORTA_BASE) +#define SSICLK_PIN (GPIO_PIN_2) + +#define SSIFSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIFSS_PORT (GPIO_PORTA_BASE) +#define SSIFSS_PIN (GPIO_PIN_3) + +#define SSIRX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIRX_PORT (GPIO_PORTA_BASE) +#define SSIRX_PIN (GPIO_PIN_4) + +#define SSITX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSITX_PORT (GPIO_PORTA_BASE) +#define SSITX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S808 + +//***************************************************************************** +// +// LM3S811 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S811 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOD) +#define C0O_PORT (GPIO_PORTD_BASE) +#define C0O_PIN (GPIO_PIN_7) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP0_PORT (GPIO_PORTD_BASE) +#define CCP0_PIN (GPIO_PIN_4) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP1_PORT (GPIO_PORTC_BASE) +#define CCP1_PIN (GPIO_PIN_5) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP2_PORT (GPIO_PORTD_BASE) +#define CCP2_PIN (GPIO_PIN_5) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP5_PORT (GPIO_PORTB_BASE) +#define CCP5_PIN (GPIO_PIN_5) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2CSCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSCL_PORT (GPIO_PORTB_BASE) +#define I2CSCL_PIN (GPIO_PIN_2) + +#define I2CSDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSDA_PORT (GPIO_PORTB_BASE) +#define I2CSDA_PIN (GPIO_PIN_3) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM2_PORT (GPIO_PORTB_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM3_PORT (GPIO_PORTB_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM4_PORT (GPIO_PORTE_BASE) +#define PWM4_PIN (GPIO_PIN_0) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM5_PORT (GPIO_PORTE_BASE) +#define PWM5_PIN (GPIO_PIN_1) + +#define SSICLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSICLK_PORT (GPIO_PORTA_BASE) +#define SSICLK_PIN (GPIO_PIN_2) + +#define SSIFSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIFSS_PORT (GPIO_PORTA_BASE) +#define SSIFSS_PIN (GPIO_PIN_3) + +#define SSIRX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIRX_PORT (GPIO_PORTA_BASE) +#define SSIRX_PIN (GPIO_PIN_4) + +#define SSITX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSITX_PORT (GPIO_PORTA_BASE) +#define SSITX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S811 + +//***************************************************************************** +// +// LM3S812 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S812 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOD) +#define C0O_PORT (GPIO_PORTD_BASE) +#define C0O_PIN (GPIO_PIN_7) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP1_PORT (GPIO_PORTE_BASE) +#define CCP1_PIN (GPIO_PIN_3) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP2_PORT (GPIO_PORTD_BASE) +#define CCP2_PIN (GPIO_PIN_5) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP5_PORT (GPIO_PORTB_BASE) +#define CCP5_PIN (GPIO_PIN_5) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2CSCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSCL_PORT (GPIO_PORTB_BASE) +#define I2CSCL_PIN (GPIO_PIN_2) + +#define I2CSDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSDA_PORT (GPIO_PORTB_BASE) +#define I2CSDA_PIN (GPIO_PIN_3) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define SSICLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSICLK_PORT (GPIO_PORTA_BASE) +#define SSICLK_PIN (GPIO_PIN_2) + +#define SSIFSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIFSS_PORT (GPIO_PORTA_BASE) +#define SSIFSS_PIN (GPIO_PIN_3) + +#define SSIRX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIRX_PORT (GPIO_PORTA_BASE) +#define SSIRX_PIN (GPIO_PIN_4) + +#define SSITX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSITX_PORT (GPIO_PORTA_BASE) +#define SSITX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S812 + +//***************************************************************************** +// +// LM3S815 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S815 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOD) +#define C0O_PORT (GPIO_PORTD_BASE) +#define C0O_PIN (GPIO_PIN_7) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1O_PORT (GPIO_PORTC_BASE) +#define C1O_PIN (GPIO_PIN_5) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_7) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP0_PORT (GPIO_PORTD_BASE) +#define CCP0_PIN (GPIO_PIN_4) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP1_PORT (GPIO_PORTE_BASE) +#define CCP1_PIN (GPIO_PIN_3) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP2_PORT (GPIO_PORTD_BASE) +#define CCP2_PIN (GPIO_PIN_5) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP4_PORT (GPIO_PORTE_BASE) +#define CCP4_PIN (GPIO_PIN_2) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2CSCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSCL_PORT (GPIO_PORTB_BASE) +#define I2CSCL_PIN (GPIO_PIN_2) + +#define I2CSDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSDA_PORT (GPIO_PORTB_BASE) +#define I2CSDA_PIN (GPIO_PIN_3) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM2_PORT (GPIO_PORTB_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM3_PORT (GPIO_PORTB_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM4_PORT (GPIO_PORTE_BASE) +#define PWM4_PIN (GPIO_PIN_0) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM5_PORT (GPIO_PORTE_BASE) +#define PWM5_PIN (GPIO_PIN_1) + +#define SSICLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSICLK_PORT (GPIO_PORTA_BASE) +#define SSICLK_PIN (GPIO_PIN_2) + +#define SSIFSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIFSS_PORT (GPIO_PORTA_BASE) +#define SSIFSS_PIN (GPIO_PIN_3) + +#define SSIRX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIRX_PORT (GPIO_PORTA_BASE) +#define SSIRX_PIN (GPIO_PIN_4) + +#define SSITX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSITX_PORT (GPIO_PORTA_BASE) +#define SSITX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S815 + +//***************************************************************************** +// +// LM3S817 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S817 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0O_PORT (GPIO_PORTB_BASE) +#define C0O_PIN (GPIO_PIN_5) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP0_PORT (GPIO_PORTD_BASE) +#define CCP0_PIN (GPIO_PIN_4) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP1_PORT (GPIO_PORTC_BASE) +#define CCP1_PIN (GPIO_PIN_5) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP2_PORT (GPIO_PORTD_BASE) +#define CCP2_PIN (GPIO_PIN_5) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOB) +#define FAULT_PORT (GPIO_PORTB_BASE) +#define FAULT_PIN (GPIO_PIN_3) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM2_PORT (GPIO_PORTB_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM3_PORT (GPIO_PORTB_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM4_PORT (GPIO_PORTE_BASE) +#define PWM4_PIN (GPIO_PIN_0) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM5_PORT (GPIO_PORTE_BASE) +#define PWM5_PIN (GPIO_PIN_1) + +#define SSICLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSICLK_PORT (GPIO_PORTA_BASE) +#define SSICLK_PIN (GPIO_PIN_2) + +#define SSIFSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIFSS_PORT (GPIO_PORTA_BASE) +#define SSIFSS_PIN (GPIO_PIN_3) + +#define SSIRX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIRX_PORT (GPIO_PORTA_BASE) +#define SSIRX_PIN (GPIO_PIN_4) + +#define SSITX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSITX_PORT (GPIO_PORTA_BASE) +#define SSITX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S817 + +//***************************************************************************** +// +// LM3S818 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S818 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0O_PORT (GPIO_PORTB_BASE) +#define C0O_PIN (GPIO_PIN_5) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP0_PORT (GPIO_PORTD_BASE) +#define CCP0_PIN (GPIO_PIN_4) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP1_PORT (GPIO_PORTC_BASE) +#define CCP1_PIN (GPIO_PIN_5) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP2_PORT (GPIO_PORTD_BASE) +#define CCP2_PIN (GPIO_PIN_5) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOB) +#define FAULT_PORT (GPIO_PORTB_BASE) +#define FAULT_PIN (GPIO_PIN_3) + +#define IDX_PERIPH (SYSCTL_PERIPH_GPIOB) +#define IDX_PORT (GPIO_PORTB_BASE) +#define IDX_PIN (GPIO_PIN_2) + +#define PHA_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHA_PORT (GPIO_PORTC_BASE) +#define PHA_PIN (GPIO_PIN_4) + +#define PHB_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHB_PORT (GPIO_PORTC_BASE) +#define PHB_PIN (GPIO_PIN_6) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM2_PORT (GPIO_PORTB_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM3_PORT (GPIO_PORTB_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM4_PORT (GPIO_PORTE_BASE) +#define PWM4_PIN (GPIO_PIN_0) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM5_PORT (GPIO_PORTE_BASE) +#define PWM5_PIN (GPIO_PIN_1) + +#define SSICLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSICLK_PORT (GPIO_PORTA_BASE) +#define SSICLK_PIN (GPIO_PIN_2) + +#define SSIFSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIFSS_PORT (GPIO_PORTA_BASE) +#define SSIFSS_PIN (GPIO_PIN_3) + +#define SSIRX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIRX_PORT (GPIO_PORTA_BASE) +#define SSIRX_PIN (GPIO_PIN_4) + +#define SSITX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSITX_PORT (GPIO_PORTA_BASE) +#define SSITX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S818 + +//***************************************************************************** +// +// LM3S828 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S828 + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP1_PORT (GPIO_PORTC_BASE) +#define CCP1_PIN (GPIO_PIN_5) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP5_PORT (GPIO_PORTB_BASE) +#define CCP5_PIN (GPIO_PIN_5) + +#define I2CSCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSCL_PORT (GPIO_PORTB_BASE) +#define I2CSCL_PIN (GPIO_PIN_2) + +#define I2CSDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2CSDA_PORT (GPIO_PORTB_BASE) +#define I2CSDA_PIN (GPIO_PIN_3) + +#define SSICLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSICLK_PORT (GPIO_PORTA_BASE) +#define SSICLK_PIN (GPIO_PIN_2) + +#define SSIFSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIFSS_PORT (GPIO_PORTA_BASE) +#define SSIFSS_PIN (GPIO_PIN_3) + +#define SSIRX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSIRX_PORT (GPIO_PORTA_BASE) +#define SSIRX_PIN (GPIO_PIN_4) + +#define SSITX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSITX_PORT (GPIO_PORTA_BASE) +#define SSITX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S828 + +//***************************************************************************** +// +// LM3S1110 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S1110 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOD) +#define C0O_PORT (GPIO_PORTD_BASE) +#define C0O_PIN (GPIO_PIN_7) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOE) +#define C1O_PORT (GPIO_PORTE_BASE) +#define C1O_PIN (GPIO_PIN_6) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S1110 + +//***************************************************************************** +// +// LM3S1133 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S1133 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C0O_PORT (GPIO_PORTC_BASE) +#define C0O_PIN (GPIO_PIN_5) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP4_PORT (GPIO_PORTA_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP5_PORT (GPIO_PORTB_BASE) +#define CCP5_PIN (GPIO_PIN_5) + +#define CCP6_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP6_PORT (GPIO_PORTH_BASE) +#define CCP6_PIN (GPIO_PIN_0) + +#define CCP7_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP7_PORT (GPIO_PORTH_BASE) +#define CCP7_PIN (GPIO_PIN_1) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2RX_PORT (GPIO_PORTG_BASE) +#define U2RX_PIN (GPIO_PIN_0) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2TX_PORT (GPIO_PORTG_BASE) +#define U2TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S1133 + +//***************************************************************************** +// +// LM3S1138 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S1138 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C0O_PORT (GPIO_PORTF_BASE) +#define C0O_PIN (GPIO_PIN_4) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C1O_PORT (GPIO_PORTF_BASE) +#define C1O_PIN (GPIO_PIN_5) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define C2O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2O_PORT (GPIO_PORTC_BASE) +#define C2O_PIN (GPIO_PIN_6) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_7) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define CCP1_PORT (GPIO_PORTF_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOG) +#define CCP3_PORT (GPIO_PORTG_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOF) +#define CCP4_PORT (GPIO_PORTF_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define I2C1SCL_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SCL_PORT (GPIO_PORTA_BASE) +#define I2C1SCL_PIN (GPIO_PIN_6) + +#define I2C1SDA_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SDA_PORT (GPIO_PORTA_BASE) +#define I2C1SDA_PIN (GPIO_PIN_7) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2RX_PORT (GPIO_PORTG_BASE) +#define U2RX_PIN (GPIO_PIN_0) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2TX_PORT (GPIO_PORTG_BASE) +#define U2TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S1138 + +//***************************************************************************** +// +// LM3S1150 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S1150 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C0O_PORT (GPIO_PORTF_BASE) +#define C0O_PIN (GPIO_PIN_4) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C1O_PORT (GPIO_PORTF_BASE) +#define C1O_PIN (GPIO_PIN_5) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_7) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP3_PORT (GPIO_PORTD_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP4_PORT (GPIO_PORTA_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define IDX0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define IDX0_PORT (GPIO_PORTD_BASE) +#define IDX0_PIN (GPIO_PIN_7) + +#define PHA0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PHA0_PORT (GPIO_PORTD_BASE) +#define PHA0_PIN (GPIO_PIN_1) + +#define PHB0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PHB0_PORT (GPIO_PORTF_BASE) +#define PHB0_PIN (GPIO_PIN_0) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM1_PORT (GPIO_PORTF_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PWM2_PORT (GPIO_PORTH_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PWM3_PORT (GPIO_PORTH_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM4_PORT (GPIO_PORTE_BASE) +#define PWM4_PIN (GPIO_PIN_6) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM5_PORT (GPIO_PORTE_BASE) +#define PWM5_PIN (GPIO_PIN_7) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2RX_PORT (GPIO_PORTG_BASE) +#define U2RX_PIN (GPIO_PIN_0) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2TX_PORT (GPIO_PORTG_BASE) +#define U2TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S1150 + +//***************************************************************************** +// +// LM3S1162 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S1162 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOD) +#define C0O_PORT (GPIO_PORTD_BASE) +#define C0O_PIN (GPIO_PIN_7) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C1O_PORT (GPIO_PORTF_BASE) +#define C1O_PIN (GPIO_PIN_5) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_7) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP3_PORT (GPIO_PORTD_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP4_PORT (GPIO_PORTA_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PWM2_PORT (GPIO_PORTH_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PWM3_PORT (GPIO_PORTH_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM4_PORT (GPIO_PORTF_BASE) +#define PWM4_PIN (GPIO_PIN_2) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM5_PORT (GPIO_PORTF_BASE) +#define PWM5_PIN (GPIO_PIN_3) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2RX_PORT (GPIO_PORTG_BASE) +#define U2RX_PIN (GPIO_PIN_0) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2TX_PORT (GPIO_PORTG_BASE) +#define U2TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S1162 + +//***************************************************************************** +// +// LM3S1165 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S1165 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C0O_PORT (GPIO_PORTC_BASE) +#define C0O_PIN (GPIO_PIN_5) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP2_PORT (GPIO_PORTD_BASE) +#define CCP2_PIN (GPIO_PIN_5) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP4_PORT (GPIO_PORTA_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define CCP6_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP6_PORT (GPIO_PORTB_BASE) +#define CCP6_PIN (GPIO_PIN_5) + +#define CCP7_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP7_PORT (GPIO_PORTH_BASE) +#define CCP7_PIN (GPIO_PIN_1) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PWM2_PORT (GPIO_PORTH_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM3_PORT (GPIO_PORTB_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM4_PORT (GPIO_PORTF_BASE) +#define PWM4_PIN (GPIO_PIN_2) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM5_PORT (GPIO_PORTF_BASE) +#define PWM5_PIN (GPIO_PIN_3) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2RX_PORT (GPIO_PORTG_BASE) +#define U2RX_PIN (GPIO_PIN_0) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2TX_PORT (GPIO_PORTG_BASE) +#define U2TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S1165 + +//***************************************************************************** +// +// LM3S1332 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S1332 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOD) +#define C0O_PORT (GPIO_PORTD_BASE) +#define C0O_PIN (GPIO_PIN_7) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_7) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP3_PORT (GPIO_PORTD_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP4_PORT (GPIO_PORTA_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define CCP6_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP6_PORT (GPIO_PORTH_BASE) +#define CCP6_PIN (GPIO_PIN_0) + +#define CCP7_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP7_PORT (GPIO_PORTH_BASE) +#define CCP7_PIN (GPIO_PIN_1) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S1332 + +//***************************************************************************** +// +// LM3S1435 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S1435 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0O_PORT (GPIO_PORTB_BASE) +#define C0O_PIN (GPIO_PIN_5) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S1435 + +//***************************************************************************** +// +// LM3S1439 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S1439 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C0O_PORT (GPIO_PORTC_BASE) +#define C0O_PIN (GPIO_PIN_5) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP4_PORT (GPIO_PORTA_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP5_PORT (GPIO_PORTB_BASE) +#define CCP5_PIN (GPIO_PIN_5) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define IDX0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define IDX0_PORT (GPIO_PORTD_BASE) +#define IDX0_PIN (GPIO_PIN_7) + +#define PHA0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHA0_PORT (GPIO_PORTC_BASE) +#define PHA0_PIN (GPIO_PIN_4) + +#define PHB0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHB0_PORT (GPIO_PORTC_BASE) +#define PHB0_PIN (GPIO_PIN_7) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PWM2_PORT (GPIO_PORTH_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PWM3_PORT (GPIO_PORTH_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM4_PORT (GPIO_PORTF_BASE) +#define PWM4_PIN (GPIO_PIN_2) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM5_PORT (GPIO_PORTF_BASE) +#define PWM5_PIN (GPIO_PIN_3) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S1439 + +//***************************************************************************** +// +// LM3S1512 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S1512 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C0O_PORT (GPIO_PORTF_BASE) +#define C0O_PIN (GPIO_PIN_4) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C1O_PORT (GPIO_PORTF_BASE) +#define C1O_PIN (GPIO_PIN_5) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define C2O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C2O_PORT (GPIO_PORTF_BASE) +#define C2O_PIN (GPIO_PIN_6) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_7) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP1_PORT (GPIO_PORTD_BASE) +#define CCP1_PIN (GPIO_PIN_7) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP3_PORT (GPIO_PORTD_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP4_PORT (GPIO_PORTD_BASE) +#define CCP4_PIN (GPIO_PIN_5) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define CCP6_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP6_PORT (GPIO_PORTH_BASE) +#define CCP6_PIN (GPIO_PIN_0) + +#define CCP7_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP7_PORT (GPIO_PORTH_BASE) +#define CCP7_PIN (GPIO_PIN_1) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define I2C1SCL_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SCL_PORT (GPIO_PORTA_BASE) +#define I2C1SCL_PIN (GPIO_PIN_6) + +#define I2C1SDA_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SDA_PORT (GPIO_PORTA_BASE) +#define I2C1SDA_PIN (GPIO_PIN_7) + +#define IDX0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define IDX0_PORT (GPIO_PORTD_BASE) +#define IDX0_PIN (GPIO_PIN_0) + +#define PHA0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PHA0_PORT (GPIO_PORTD_BASE) +#define PHA0_PIN (GPIO_PIN_1) + +#define PHB0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PHB0_PORT (GPIO_PORTF_BASE) +#define PHB0_PIN (GPIO_PIN_0) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2RX_PORT (GPIO_PORTG_BASE) +#define U2RX_PIN (GPIO_PIN_0) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2TX_PORT (GPIO_PORTG_BASE) +#define U2TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S1512 + +//***************************************************************************** +// +// LM3S1538 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S1538 + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP1_PORT (GPIO_PORTB_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP5_PORT (GPIO_PORTB_BASE) +#define CCP5_PIN (GPIO_PIN_5) + +#define CCP6_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP6_PORT (GPIO_PORTH_BASE) +#define CCP6_PIN (GPIO_PIN_0) + +#define CCP7_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP7_PORT (GPIO_PORTH_BASE) +#define CCP7_PIN (GPIO_PIN_1) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define I2C1SCL_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SCL_PORT (GPIO_PORTA_BASE) +#define I2C1SCL_PIN (GPIO_PIN_6) + +#define I2C1SDA_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SDA_PORT (GPIO_PORTA_BASE) +#define I2C1SDA_PIN (GPIO_PIN_7) + +#define IDX0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define IDX0_PORT (GPIO_PORTD_BASE) +#define IDX0_PIN (GPIO_PIN_0) + +#define PHA0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHA0_PORT (GPIO_PORTC_BASE) +#define PHA0_PIN (GPIO_PIN_4) + +#define PHB0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PHB0_PORT (GPIO_PORTF_BASE) +#define PHB0_PIN (GPIO_PIN_0) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2RX_PORT (GPIO_PORTG_BASE) +#define U2RX_PIN (GPIO_PIN_0) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2TX_PORT (GPIO_PORTG_BASE) +#define U2TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S1538 + +//***************************************************************************** +// +// LM3S1601 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S1601 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C0O_PORT (GPIO_PORTF_BASE) +#define C0O_PIN (GPIO_PIN_4) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOE) +#define C1O_PORT (GPIO_PORTE_BASE) +#define C1O_PIN (GPIO_PIN_6) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP1_PORT (GPIO_PORTD_BASE) +#define CCP1_PIN (GPIO_PIN_7) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define CCP6_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP6_PORT (GPIO_PORTH_BASE) +#define CCP6_PIN (GPIO_PIN_0) + +#define CCP7_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP7_PORT (GPIO_PORTH_BASE) +#define CCP7_PIN (GPIO_PIN_1) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define I2C1SCL_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SCL_PORT (GPIO_PORTA_BASE) +#define I2C1SCL_PIN (GPIO_PIN_6) + +#define I2C1SDA_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SDA_PORT (GPIO_PORTA_BASE) +#define I2C1SDA_PIN (GPIO_PIN_7) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2RX_PORT (GPIO_PORTG_BASE) +#define U2RX_PIN (GPIO_PIN_0) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2TX_PORT (GPIO_PORTG_BASE) +#define U2TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S1601 + +//***************************************************************************** +// +// LM3S1607 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S1607 + +#define ADC0_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC0_PORT (GPIO_PORTE_BASE) +#define ADC0_PIN (GPIO_PIN_3) + +#define ADC1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC1_PORT (GPIO_PORTE_BASE) +#define ADC1_PIN (GPIO_PIN_2) + +#define ADC2_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC2_PORT (GPIO_PORTE_BASE) +#define ADC2_PIN (GPIO_PIN_1) + +#define ADC3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC3_PORT (GPIO_PORTE_BASE) +#define ADC3_PIN (GPIO_PIN_0) + +#define ADC4_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC4_PORT (GPIO_PORTD_BASE) +#define ADC4_PIN (GPIO_PIN_3) + +#define ADC5_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC5_PORT (GPIO_PORTD_BASE) +#define ADC5_PIN (GPIO_PIN_2) + +#define ADC6_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC6_PORT (GPIO_PORTD_BASE) +#define ADC6_PIN (GPIO_PIN_1) + +#define ADC7_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC7_PORT (GPIO_PORTD_BASE) +#define ADC7_PIN (GPIO_PIN_0) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_5) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP1_PORT (GPIO_PORTC_BASE) +#define CCP1_PIN (GPIO_PIN_5) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP2_PORT (GPIO_PORTC_BASE) +#define CCP2_PIN (GPIO_PIN_4) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP5_PORT (GPIO_PORTB_BASE) +#define CCP5_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define I2C1SCL_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SCL_PORT (GPIO_PORTA_BASE) +#define I2C1SCL_PIN (GPIO_PIN_6) + +#define I2C1SDA_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SDA_PORT (GPIO_PORTA_BASE) +#define I2C1SDA_PIN (GPIO_PIN_7) + +#define NMI_PERIPH (SYSCTL_PERIPH_GPIOB) +#define NMI_PORT (GPIO_PORTB_BASE) +#define NMI_PIN (GPIO_PIN_7) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOB) +#define U1RX_PORT (GPIO_PORTB_BASE) +#define U1RX_PIN (GPIO_PIN_0) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOB) +#define U1TX_PORT (GPIO_PORTB_BASE) +#define U1TX_PIN (GPIO_PIN_1) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOB) +#define U2RX_PORT (GPIO_PORTB_BASE) +#define U2RX_PIN (GPIO_PIN_4) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define U2TX_PORT (GPIO_PORTE_BASE) +#define U2TX_PIN (GPIO_PIN_4) + +#endif // PART_LM3S1607 + +//***************************************************************************** +// +// LM3S1608 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S1608 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C0O_PORT (GPIO_PORTF_BASE) +#define C0O_PIN (GPIO_PIN_4) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C1O_PORT (GPIO_PORTF_BASE) +#define C1O_PIN (GPIO_PIN_5) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define CCP1_PORT (GPIO_PORTF_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define CCP6_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP6_PORT (GPIO_PORTH_BASE) +#define CCP6_PIN (GPIO_PIN_0) + +#define CCP7_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP7_PORT (GPIO_PORTH_BASE) +#define CCP7_PIN (GPIO_PIN_1) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define I2C1SCL_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SCL_PORT (GPIO_PORTA_BASE) +#define I2C1SCL_PIN (GPIO_PIN_6) + +#define I2C1SDA_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SDA_PORT (GPIO_PORTA_BASE) +#define I2C1SDA_PIN (GPIO_PIN_7) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S1608 + +//***************************************************************************** +// +// LM3S1620 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S1620 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C0O_PORT (GPIO_PORTF_BASE) +#define C0O_PIN (GPIO_PIN_4) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C1O_PORT (GPIO_PORTF_BASE) +#define C1O_PIN (GPIO_PIN_5) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_7) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP3_PORT (GPIO_PORTD_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define IDX0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define IDX0_PORT (GPIO_PORTD_BASE) +#define IDX0_PIN (GPIO_PIN_7) + +#define PHA0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHA0_PORT (GPIO_PORTC_BASE) +#define PHA0_PIN (GPIO_PIN_4) + +#define PHB0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PHB0_PORT (GPIO_PORTF_BASE) +#define PHB0_PIN (GPIO_PIN_0) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PWM2_PORT (GPIO_PORTH_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PWM3_PORT (GPIO_PORTH_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM4_PORT (GPIO_PORTE_BASE) +#define PWM4_PIN (GPIO_PIN_6) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM5_PORT (GPIO_PORTE_BASE) +#define PWM5_PIN (GPIO_PIN_7) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S1620 + +//***************************************************************************** +// +// LM3S1625 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S1625 + +#define ADC0_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC0_PORT (GPIO_PORTE_BASE) +#define ADC0_PIN (GPIO_PIN_3) + +#define ADC1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC1_PORT (GPIO_PORTE_BASE) +#define ADC1_PIN (GPIO_PIN_2) + +#define ADC2_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC2_PORT (GPIO_PORTE_BASE) +#define ADC2_PIN (GPIO_PIN_1) + +#define ADC3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC3_PORT (GPIO_PORTE_BASE) +#define ADC3_PIN (GPIO_PIN_0) + +#define ADC4_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC4_PORT (GPIO_PORTD_BASE) +#define ADC4_PIN (GPIO_PIN_3) + +#define ADC5_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC5_PORT (GPIO_PORTD_BASE) +#define ADC5_PIN (GPIO_PIN_2) + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0O_PORT (GPIO_PORTB_BASE) +#define C0O_PIN (GPIO_PIN_5) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP0_PORT (GPIO_PORTC_BASE) +#define CCP0_PIN (GPIO_PIN_7) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP1_PORT (GPIO_PORTC_BASE) +#define CCP1_PIN (GPIO_PIN_5) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP2_PORT (GPIO_PORTC_BASE) +#define CCP2_PIN (GPIO_PIN_4) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define FAULT0_PERIPH (SYSCTL_PERIPH_GPIOE) +#define FAULT0_PORT (GPIO_PORTE_BASE) +#define FAULT0_PIN (GPIO_PIN_4) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define I2C1SCL_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SCL_PORT (GPIO_PORTA_BASE) +#define I2C1SCL_PIN (GPIO_PIN_6) + +#define I2C1SDA_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SDA_PORT (GPIO_PORTA_BASE) +#define I2C1SDA_PIN (GPIO_PIN_7) + +#define NMI_PERIPH (SYSCTL_PERIPH_GPIOB) +#define NMI_PORT (GPIO_PORTB_BASE) +#define NMI_PIN (GPIO_PIN_7) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM2_PORT (GPIO_PORTB_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM3_PORT (GPIO_PORTB_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S1625 + +//***************************************************************************** +// +// LM3S1626 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S1626 + +#define ADC0_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC0_PORT (GPIO_PORTE_BASE) +#define ADC0_PIN (GPIO_PIN_3) + +#define ADC1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC1_PORT (GPIO_PORTE_BASE) +#define ADC1_PIN (GPIO_PIN_2) + +#define ADC2_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC2_PORT (GPIO_PORTE_BASE) +#define ADC2_PIN (GPIO_PIN_1) + +#define ADC3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC3_PORT (GPIO_PORTE_BASE) +#define ADC3_PIN (GPIO_PIN_0) + +#define ADC4_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC4_PORT (GPIO_PORTD_BASE) +#define ADC4_PIN (GPIO_PIN_3) + +#define ADC5_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC5_PORT (GPIO_PORTD_BASE) +#define ADC5_PIN (GPIO_PIN_2) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP0_PORT (GPIO_PORTC_BASE) +#define CCP0_PIN (GPIO_PIN_6) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP1_PORT (GPIO_PORTB_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP2_PORT (GPIO_PORTC_BASE) +#define CCP2_PIN (GPIO_PIN_4) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_5) + +#define FAULT0_PERIPH (SYSCTL_PERIPH_GPIOE) +#define FAULT0_PORT (GPIO_PORTE_BASE) +#define FAULT0_PIN (GPIO_PIN_4) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define IDX0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define IDX0_PORT (GPIO_PORTD_BASE) +#define IDX0_PIN (GPIO_PIN_0) + +#define NMI_PERIPH (SYSCTL_PERIPH_GPIOB) +#define NMI_PORT (GPIO_PORTB_BASE) +#define NMI_PIN (GPIO_PIN_7) + +#define PHA0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PHA0_PORT (GPIO_PORTD_BASE) +#define PHA0_PIN (GPIO_PIN_1) + +#define PHB0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHB0_PORT (GPIO_PORTC_BASE) +#define PHB0_PIN (GPIO_PIN_7) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOA) +#define PWM0_PORT (GPIO_PORTA_BASE) +#define PWM0_PIN (GPIO_PIN_6) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define PWM1_PORT (GPIO_PORTA_BASE) +#define PWM1_PIN (GPIO_PIN_7) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM2_PORT (GPIO_PORTB_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM3_PORT (GPIO_PORTB_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOB) +#define U1RX_PORT (GPIO_PORTB_BASE) +#define U1RX_PIN (GPIO_PIN_4) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOB) +#define U1TX_PORT (GPIO_PORTB_BASE) +#define U1TX_PIN (GPIO_PIN_5) + +#endif // PART_LM3S1626 + +//***************************************************************************** +// +// LM3S1627 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S1627 + +#define ADC0_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC0_PORT (GPIO_PORTE_BASE) +#define ADC0_PIN (GPIO_PIN_3) + +#define ADC1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC1_PORT (GPIO_PORTE_BASE) +#define ADC1_PIN (GPIO_PIN_2) + +#define ADC2_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC2_PORT (GPIO_PORTE_BASE) +#define ADC2_PIN (GPIO_PIN_1) + +#define ADC3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC3_PORT (GPIO_PORTE_BASE) +#define ADC3_PIN (GPIO_PIN_0) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP0_PORT (GPIO_PORTC_BASE) +#define CCP0_PIN (GPIO_PIN_6) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP1_PORT (GPIO_PORTB_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_5) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_5) + +#define FAULT0_PERIPH (SYSCTL_PERIPH_GPIOE) +#define FAULT0_PORT (GPIO_PORTE_BASE) +#define FAULT0_PIN (GPIO_PIN_4) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define IDX0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define IDX0_PORT (GPIO_PORTB_BASE) +#define IDX0_PIN (GPIO_PIN_4) + +#define NMI_PERIPH (SYSCTL_PERIPH_GPIOB) +#define NMI_PORT (GPIO_PORTB_BASE) +#define NMI_PIN (GPIO_PIN_7) + +#define PHA0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHA0_PORT (GPIO_PORTC_BASE) +#define PHA0_PIN (GPIO_PIN_4) + +#define PHB0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHB0_PORT (GPIO_PORTC_BASE) +#define PHB0_PIN (GPIO_PIN_7) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM2_PORT (GPIO_PORTD_BASE) +#define PWM2_PIN (GPIO_PIN_2) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM3_PORT (GPIO_PORTD_BASE) +#define PWM3_PIN (GPIO_PIN_3) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOA) +#define PWM4_PORT (GPIO_PORTA_BASE) +#define PWM4_PIN (GPIO_PIN_6) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOA) +#define PWM5_PORT (GPIO_PORTA_BASE) +#define PWM5_PIN (GPIO_PIN_7) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOB) +#define U1RX_PORT (GPIO_PORTB_BASE) +#define U1RX_PIN (GPIO_PIN_0) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOB) +#define U1TX_PORT (GPIO_PORTB_BASE) +#define U1TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S1627 + +//***************************************************************************** +// +// LM3S1635 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S1635 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C0O_PORT (GPIO_PORTF_BASE) +#define C0O_PIN (GPIO_PIN_4) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C1O_PORT (GPIO_PORTF_BASE) +#define C1O_PIN (GPIO_PIN_5) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP0_PORT (GPIO_PORTD_BASE) +#define CCP0_PIN (GPIO_PIN_4) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP1_PORT (GPIO_PORTD_BASE) +#define CCP1_PIN (GPIO_PIN_7) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP2_PORT (GPIO_PORTD_BASE) +#define CCP2_PIN (GPIO_PIN_5) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define CCP6_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP6_PORT (GPIO_PORTH_BASE) +#define CCP6_PIN (GPIO_PIN_0) + +#define CCP7_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP7_PORT (GPIO_PORTH_BASE) +#define CCP7_PIN (GPIO_PIN_1) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define I2C1SCL_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SCL_PORT (GPIO_PORTA_BASE) +#define I2C1SCL_PIN (GPIO_PIN_6) + +#define I2C1SDA_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SDA_PORT (GPIO_PORTA_BASE) +#define I2C1SDA_PIN (GPIO_PIN_7) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM2_PORT (GPIO_PORTB_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM3_PORT (GPIO_PORTB_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM4_PORT (GPIO_PORTF_BASE) +#define PWM4_PIN (GPIO_PIN_2) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM5_PORT (GPIO_PORTF_BASE) +#define PWM5_PIN (GPIO_PIN_3) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2RX_PORT (GPIO_PORTG_BASE) +#define U2RX_PIN (GPIO_PIN_0) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2TX_PORT (GPIO_PORTG_BASE) +#define U2TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S1635 + +//***************************************************************************** +// +// LM3S1637 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S1637 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C0O_PORT (GPIO_PORTC_BASE) +#define C0O_PIN (GPIO_PIN_5) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP4_PORT (GPIO_PORTA_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP5_PORT (GPIO_PORTB_BASE) +#define CCP5_PIN (GPIO_PIN_5) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define IDX0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define IDX0_PORT (GPIO_PORTD_BASE) +#define IDX0_PIN (GPIO_PIN_7) + +#define PHA0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHA0_PORT (GPIO_PORTC_BASE) +#define PHA0_PIN (GPIO_PIN_4) + +#define PHB0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHB0_PORT (GPIO_PORTC_BASE) +#define PHB0_PIN (GPIO_PIN_7) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PWM2_PORT (GPIO_PORTH_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PWM3_PORT (GPIO_PORTH_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM4_PORT (GPIO_PORTE_BASE) +#define PWM4_PIN (GPIO_PIN_0) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM5_PORT (GPIO_PORTE_BASE) +#define PWM5_PIN (GPIO_PIN_1) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2RX_PORT (GPIO_PORTG_BASE) +#define U2RX_PIN (GPIO_PIN_0) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2TX_PORT (GPIO_PORTG_BASE) +#define U2TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S1637 + +//***************************************************************************** +// +// LM3S1751 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S1751 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C0O_PORT (GPIO_PORTC_BASE) +#define C0O_PIN (GPIO_PIN_5) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP4_PORT (GPIO_PORTA_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP5_PORT (GPIO_PORTB_BASE) +#define CCP5_PIN (GPIO_PIN_5) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PWM2_PORT (GPIO_PORTH_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PWM3_PORT (GPIO_PORTH_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2RX_PORT (GPIO_PORTG_BASE) +#define U2RX_PIN (GPIO_PIN_0) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2TX_PORT (GPIO_PORTG_BASE) +#define U2TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S1751 + +//***************************************************************************** +// +// LM3S1776 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S1776 + +#define ADC0_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC0_PORT (GPIO_PORTE_BASE) +#define ADC0_PIN (GPIO_PIN_3) + +#define ADC1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC1_PORT (GPIO_PORTE_BASE) +#define ADC1_PIN (GPIO_PIN_2) + +#define ADC2_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC2_PORT (GPIO_PORTE_BASE) +#define ADC2_PIN (GPIO_PIN_1) + +#define ADC3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC3_PORT (GPIO_PORTE_BASE) +#define ADC3_PIN (GPIO_PIN_0) + +#define ADC4_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC4_PORT (GPIO_PORTD_BASE) +#define ADC4_PIN (GPIO_PIN_3) + +#define ADC5_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC5_PORT (GPIO_PORTD_BASE) +#define ADC5_PIN (GPIO_PIN_2) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP0_PORT (GPIO_PORTC_BASE) +#define CCP0_PIN (GPIO_PIN_7) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_5) + +#define FAULT0_PERIPH (SYSCTL_PERIPH_GPIOE) +#define FAULT0_PORT (GPIO_PORTE_BASE) +#define FAULT0_PIN (GPIO_PIN_4) + +#define FAULT1_PERIPH (SYSCTL_PERIPH_GPIOB) +#define FAULT1_PORT (GPIO_PORTB_BASE) +#define FAULT1_PIN (GPIO_PIN_6) + +#define FAULT2_PERIPH (SYSCTL_PERIPH_GPIOC) +#define FAULT2_PORT (GPIO_PORTC_BASE) +#define FAULT2_PIN (GPIO_PIN_5) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define NMI_PERIPH (SYSCTL_PERIPH_GPIOB) +#define NMI_PORT (GPIO_PORTB_BASE) +#define NMI_PIN (GPIO_PIN_7) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM2_PORT (GPIO_PORTB_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM3_PORT (GPIO_PORTB_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOA) +#define PWM4_PORT (GPIO_PORTA_BASE) +#define PWM4_PIN (GPIO_PIN_6) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOA) +#define PWM5_PORT (GPIO_PORTA_BASE) +#define PWM5_PIN (GPIO_PIN_7) + +#define PWM6_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PWM6_PORT (GPIO_PORTC_BASE) +#define PWM6_PIN (GPIO_PIN_4) + +#define PWM7_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PWM7_PORT (GPIO_PORTC_BASE) +#define PWM7_PIN (GPIO_PIN_6) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S1776 + +//***************************************************************************** +// +// LM3S1850 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S1850 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C0O_PORT (GPIO_PORTF_BASE) +#define C0O_PIN (GPIO_PIN_4) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOE) +#define C1O_PORT (GPIO_PORTE_BASE) +#define C1O_PIN (GPIO_PIN_6) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_7) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP3_PORT (GPIO_PORTD_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP4_PORT (GPIO_PORTA_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define IDX0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define IDX0_PORT (GPIO_PORTD_BASE) +#define IDX0_PIN (GPIO_PIN_7) + +#define PHA0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PHA0_PORT (GPIO_PORTD_BASE) +#define PHA0_PIN (GPIO_PIN_1) + +#define PHB0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PHB0_PORT (GPIO_PORTF_BASE) +#define PHB0_PIN (GPIO_PIN_0) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM1_PORT (GPIO_PORTF_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PWM2_PORT (GPIO_PORTH_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PWM3_PORT (GPIO_PORTH_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM4_PORT (GPIO_PORTE_BASE) +#define PWM4_PIN (GPIO_PIN_0) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM5_PORT (GPIO_PORTE_BASE) +#define PWM5_PIN (GPIO_PIN_1) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S1850 + +//***************************************************************************** +// +// LM3S1911 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S1911 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C0O_PORT (GPIO_PORTF_BASE) +#define C0O_PIN (GPIO_PIN_4) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOE) +#define C1O_PORT (GPIO_PORTE_BASE) +#define C1O_PIN (GPIO_PIN_6) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP1_PORT (GPIO_PORTD_BASE) +#define CCP1_PIN (GPIO_PIN_7) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define CCP6_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP6_PORT (GPIO_PORTH_BASE) +#define CCP6_PIN (GPIO_PIN_0) + +#define CCP7_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP7_PORT (GPIO_PORTH_BASE) +#define CCP7_PIN (GPIO_PIN_1) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define I2C1SCL_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SCL_PORT (GPIO_PORTA_BASE) +#define I2C1SCL_PIN (GPIO_PIN_6) + +#define I2C1SDA_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SDA_PORT (GPIO_PORTA_BASE) +#define I2C1SDA_PIN (GPIO_PIN_7) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2RX_PORT (GPIO_PORTG_BASE) +#define U2RX_PIN (GPIO_PIN_0) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2TX_PORT (GPIO_PORTG_BASE) +#define U2TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S1911 + +//***************************************************************************** +// +// LM3S1918 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S1918 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C0O_PORT (GPIO_PORTF_BASE) +#define C0O_PIN (GPIO_PIN_4) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C1O_PORT (GPIO_PORTF_BASE) +#define C1O_PIN (GPIO_PIN_5) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define CCP1_PORT (GPIO_PORTF_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define CCP6_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP6_PORT (GPIO_PORTH_BASE) +#define CCP6_PIN (GPIO_PIN_0) + +#define CCP7_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP7_PORT (GPIO_PORTH_BASE) +#define CCP7_PIN (GPIO_PIN_1) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define I2C1SCL_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SCL_PORT (GPIO_PORTA_BASE) +#define I2C1SCL_PIN (GPIO_PIN_6) + +#define I2C1SDA_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SDA_PORT (GPIO_PORTA_BASE) +#define I2C1SDA_PIN (GPIO_PIN_7) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S1918 + +//***************************************************************************** +// +// LM3S1937 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S1937 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0O_PORT (GPIO_PORTB_BASE) +#define C0O_PIN (GPIO_PIN_5) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PWM2_PORT (GPIO_PORTH_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PWM3_PORT (GPIO_PORTH_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM4_PORT (GPIO_PORTE_BASE) +#define PWM4_PIN (GPIO_PIN_0) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM5_PORT (GPIO_PORTE_BASE) +#define PWM5_PIN (GPIO_PIN_1) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S1937 + +//***************************************************************************** +// +// LM3S1958 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S1958 + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP1_PORT (GPIO_PORTB_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP5_PORT (GPIO_PORTB_BASE) +#define CCP5_PIN (GPIO_PIN_5) + +#define CCP6_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP6_PORT (GPIO_PORTH_BASE) +#define CCP6_PIN (GPIO_PIN_0) + +#define CCP7_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP7_PORT (GPIO_PORTH_BASE) +#define CCP7_PIN (GPIO_PIN_1) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define I2C1SCL_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SCL_PORT (GPIO_PORTA_BASE) +#define I2C1SCL_PIN (GPIO_PIN_6) + +#define I2C1SDA_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SDA_PORT (GPIO_PORTA_BASE) +#define I2C1SDA_PIN (GPIO_PIN_7) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2RX_PORT (GPIO_PORTG_BASE) +#define U2RX_PIN (GPIO_PIN_0) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2TX_PORT (GPIO_PORTG_BASE) +#define U2TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S1958 + +//***************************************************************************** +// +// LM3S1960 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S1960 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C0O_PORT (GPIO_PORTF_BASE) +#define C0O_PIN (GPIO_PIN_4) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C1O_PORT (GPIO_PORTF_BASE) +#define C1O_PIN (GPIO_PIN_5) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define C2O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C2O_PORT (GPIO_PORTF_BASE) +#define C2O_PIN (GPIO_PIN_6) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_7) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP0_PORT (GPIO_PORTD_BASE) +#define CCP0_PIN (GPIO_PIN_4) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP1_PORT (GPIO_PORTD_BASE) +#define CCP1_PIN (GPIO_PIN_7) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP2_PORT (GPIO_PORTD_BASE) +#define CCP2_PIN (GPIO_PIN_5) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP3_PORT (GPIO_PORTE_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOF) +#define CCP4_PORT (GPIO_PORTF_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define CCP6_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP6_PORT (GPIO_PORTH_BASE) +#define CCP6_PIN (GPIO_PIN_0) + +#define CCP7_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP7_PORT (GPIO_PORTH_BASE) +#define CCP7_PIN (GPIO_PIN_1) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define I2C1SCL_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SCL_PORT (GPIO_PORTA_BASE) +#define I2C1SCL_PIN (GPIO_PIN_6) + +#define I2C1SDA_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SDA_PORT (GPIO_PORTA_BASE) +#define I2C1SDA_PIN (GPIO_PIN_7) + +#define IDX0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define IDX0_PORT (GPIO_PORTD_BASE) +#define IDX0_PIN (GPIO_PIN_0) + +#define IDX1_PERIPH (SYSCTL_PERIPH_GPIOH) +#define IDX1_PORT (GPIO_PORTH_BASE) +#define IDX1_PIN (GPIO_PIN_2) + +#define PHA0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PHA0_PORT (GPIO_PORTD_BASE) +#define PHA0_PIN (GPIO_PIN_1) + +#define PHA1_PERIPH (SYSCTL_PERIPH_GPIOG) +#define PHA1_PORT (GPIO_PORTG_BASE) +#define PHA1_PIN (GPIO_PIN_6) + +#define PHB0_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PHB0_PORT (GPIO_PORTH_BASE) +#define PHB0_PIN (GPIO_PIN_3) + +#define PHB1_PERIPH (SYSCTL_PERIPH_GPIOG) +#define PHB1_PORT (GPIO_PORTG_BASE) +#define PHB1_PIN (GPIO_PIN_7) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM0_PORT (GPIO_PORTF_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM1_PORT (GPIO_PORTF_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM2_PORT (GPIO_PORTB_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM3_PORT (GPIO_PORTB_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM4_PORT (GPIO_PORTE_BASE) +#define PWM4_PIN (GPIO_PIN_6) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM5_PORT (GPIO_PORTE_BASE) +#define PWM5_PIN (GPIO_PIN_7) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2RX_PORT (GPIO_PORTG_BASE) +#define U2RX_PIN (GPIO_PIN_0) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2TX_PORT (GPIO_PORTG_BASE) +#define U2TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S1960 + +//***************************************************************************** +// +// LM3S1968 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S1968 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C0O_PORT (GPIO_PORTF_BASE) +#define C0O_PIN (GPIO_PIN_4) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_7) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define CCP1_PORT (GPIO_PORTF_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOG) +#define CCP3_PORT (GPIO_PORTG_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOH) +#define FAULT_PORT (GPIO_PORTH_BASE) +#define FAULT_PIN (GPIO_PIN_3) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define I2C1SCL_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SCL_PORT (GPIO_PORTA_BASE) +#define I2C1SCL_PIN (GPIO_PIN_6) + +#define I2C1SDA_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SDA_PORT (GPIO_PORTA_BASE) +#define I2C1SDA_PIN (GPIO_PIN_7) + +#define IDX0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define IDX0_PORT (GPIO_PORTD_BASE) +#define IDX0_PIN (GPIO_PIN_0) + +#define IDX1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define IDX1_PORT (GPIO_PORTF_BASE) +#define IDX1_PIN (GPIO_PIN_1) + +#define PHA0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHA0_PORT (GPIO_PORTC_BASE) +#define PHA0_PIN (GPIO_PIN_4) + +#define PHA1_PERIPH (SYSCTL_PERIPH_GPIOG) +#define PHA1_PORT (GPIO_PORTG_BASE) +#define PHA1_PIN (GPIO_PIN_6) + +#define PHB0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PHB0_PORT (GPIO_PORTF_BASE) +#define PHB0_PIN (GPIO_PIN_0) + +#define PHB1_PERIPH (SYSCTL_PERIPH_GPIOG) +#define PHB1_PORT (GPIO_PORTG_BASE) +#define PHB1_PIN (GPIO_PIN_7) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOG) +#define PWM0_PORT (GPIO_PORTG_BASE) +#define PWM0_PIN (GPIO_PIN_2) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PWM2_PORT (GPIO_PORTH_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PWM3_PORT (GPIO_PORTH_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM4_PORT (GPIO_PORTF_BASE) +#define PWM4_PIN (GPIO_PIN_2) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM5_PORT (GPIO_PORTF_BASE) +#define PWM5_PIN (GPIO_PIN_3) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2RX_PORT (GPIO_PORTG_BASE) +#define U2RX_PIN (GPIO_PIN_0) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2TX_PORT (GPIO_PORTG_BASE) +#define U2TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S1968 + +//***************************************************************************** +// +// LM3S2016 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S2016 + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S2016 + +//***************************************************************************** +// +// LM3S2110 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S2110 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOD) +#define C0O_PORT (GPIO_PORTD_BASE) +#define C0O_PIN (GPIO_PIN_7) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_7) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP3_PORT (GPIO_PORTD_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM0_PORT (GPIO_PORTF_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM1_PORT (GPIO_PORTF_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S2110 + +//***************************************************************************** +// +// LM3S2139 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S2139 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOD) +#define C0O_PORT (GPIO_PORTD_BASE) +#define C0O_PIN (GPIO_PIN_7) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_7) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP3_PORT (GPIO_PORTD_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP4_PORT (GPIO_PORTA_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S2139 + +//***************************************************************************** +// +// LM3S2276 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S2276 + +#define ADC0_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC0_PORT (GPIO_PORTE_BASE) +#define ADC0_PIN (GPIO_PIN_3) + +#define ADC1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC1_PORT (GPIO_PORTE_BASE) +#define ADC1_PIN (GPIO_PIN_2) + +#define ADC2_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC2_PORT (GPIO_PORTE_BASE) +#define ADC2_PIN (GPIO_PIN_1) + +#define ADC3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC3_PORT (GPIO_PORTE_BASE) +#define ADC3_PIN (GPIO_PIN_0) + +#define ADC4_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC4_PORT (GPIO_PORTD_BASE) +#define ADC4_PIN (GPIO_PIN_3) + +#define ADC5_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC5_PORT (GPIO_PORTD_BASE) +#define ADC5_PIN (GPIO_PIN_2) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CAN0RX_PORT (GPIO_PORTB_BASE) +#define CAN0RX_PIN (GPIO_PIN_4) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CAN0TX_PORT (GPIO_PORTB_BASE) +#define CAN0TX_PIN (GPIO_PIN_5) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP0_PORT (GPIO_PORTC_BASE) +#define CCP0_PIN (GPIO_PIN_7) + +#define FAULT0_PERIPH (SYSCTL_PERIPH_GPIOE) +#define FAULT0_PORT (GPIO_PORTE_BASE) +#define FAULT0_PIN (GPIO_PIN_4) + +#define FAULT1_PERIPH (SYSCTL_PERIPH_GPIOB) +#define FAULT1_PORT (GPIO_PORTB_BASE) +#define FAULT1_PIN (GPIO_PIN_6) + +#define FAULT2_PERIPH (SYSCTL_PERIPH_GPIOC) +#define FAULT2_PORT (GPIO_PORTC_BASE) +#define FAULT2_PIN (GPIO_PIN_5) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define NMI_PERIPH (SYSCTL_PERIPH_GPIOB) +#define NMI_PORT (GPIO_PORTB_BASE) +#define NMI_PIN (GPIO_PIN_7) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM2_PORT (GPIO_PORTB_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM3_PORT (GPIO_PORTB_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOA) +#define PWM4_PORT (GPIO_PORTA_BASE) +#define PWM4_PIN (GPIO_PIN_6) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOA) +#define PWM5_PORT (GPIO_PORTA_BASE) +#define PWM5_PIN (GPIO_PIN_7) + +#define PWM6_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PWM6_PORT (GPIO_PORTC_BASE) +#define PWM6_PIN (GPIO_PIN_4) + +#define PWM7_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PWM7_PORT (GPIO_PORTC_BASE) +#define PWM7_PIN (GPIO_PIN_6) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S2276 + +//***************************************************************************** +// +// LM3S2410 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S2410 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOD) +#define C0O_PORT (GPIO_PORTD_BASE) +#define C0O_PIN (GPIO_PIN_7) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOE) +#define C1O_PORT (GPIO_PORTE_BASE) +#define C1O_PIN (GPIO_PIN_6) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S2410 + +//***************************************************************************** +// +// LM3S2412 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S2412 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOD) +#define C0O_PORT (GPIO_PORTD_BASE) +#define C0O_PIN (GPIO_PIN_7) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM0_PORT (GPIO_PORTF_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM1_PORT (GPIO_PORTF_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S2412 + +//***************************************************************************** +// +// LM3S2432 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S2432 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOD) +#define C0O_PORT (GPIO_PORTD_BASE) +#define C0O_PIN (GPIO_PIN_7) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM0_PORT (GPIO_PORTF_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM1_PORT (GPIO_PORTF_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S2432 + +//***************************************************************************** +// +// LM3S2533 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S2533 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOD) +#define C0O_PORT (GPIO_PORTD_BASE) +#define C0O_PIN (GPIO_PIN_7) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_7) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP3_PORT (GPIO_PORTD_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP4_PORT (GPIO_PORTA_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM0_PORT (GPIO_PORTF_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM1_PORT (GPIO_PORTF_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PWM2_PORT (GPIO_PORTH_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PWM3_PORT (GPIO_PORTH_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM4_PORT (GPIO_PORTE_BASE) +#define PWM4_PIN (GPIO_PIN_0) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM5_PORT (GPIO_PORTE_BASE) +#define PWM5_PIN (GPIO_PIN_1) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S2533 + +//***************************************************************************** +// +// LM3S2601 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S2601 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C0O_PORT (GPIO_PORTF_BASE) +#define C0O_PIN (GPIO_PIN_4) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOE) +#define C1O_PORT (GPIO_PORTE_BASE) +#define C1O_PIN (GPIO_PIN_6) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP1_PORT (GPIO_PORTD_BASE) +#define CCP1_PIN (GPIO_PIN_7) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define CCP6_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP6_PORT (GPIO_PORTH_BASE) +#define CCP6_PIN (GPIO_PIN_0) + +#define CCP7_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP7_PORT (GPIO_PORTH_BASE) +#define CCP7_PIN (GPIO_PIN_1) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define I2C1SCL_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SCL_PORT (GPIO_PORTA_BASE) +#define I2C1SCL_PIN (GPIO_PIN_6) + +#define I2C1SDA_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SDA_PORT (GPIO_PORTA_BASE) +#define I2C1SDA_PIN (GPIO_PIN_7) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2RX_PORT (GPIO_PORTG_BASE) +#define U2RX_PIN (GPIO_PIN_0) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2TX_PORT (GPIO_PORTG_BASE) +#define U2TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S2601 + +//***************************************************************************** +// +// LM3S2608 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S2608 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C0O_PORT (GPIO_PORTF_BASE) +#define C0O_PIN (GPIO_PIN_4) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C1O_PORT (GPIO_PORTF_BASE) +#define C1O_PIN (GPIO_PIN_5) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define CCP1_PORT (GPIO_PORTF_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define CCP6_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP6_PORT (GPIO_PORTH_BASE) +#define CCP6_PIN (GPIO_PIN_0) + +#define CCP7_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP7_PORT (GPIO_PORTH_BASE) +#define CCP7_PIN (GPIO_PIN_1) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define I2C1SCL_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SCL_PORT (GPIO_PORTA_BASE) +#define I2C1SCL_PIN (GPIO_PIN_6) + +#define I2C1SDA_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SDA_PORT (GPIO_PORTA_BASE) +#define I2C1SDA_PIN (GPIO_PIN_7) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S2608 + +//***************************************************************************** +// +// LM3S2616 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S2616 + +#define ADC0_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC0_PORT (GPIO_PORTE_BASE) +#define ADC0_PIN (GPIO_PIN_3) + +#define ADC1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC1_PORT (GPIO_PORTE_BASE) +#define ADC1_PIN (GPIO_PIN_2) + +#define ADC2_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC2_PORT (GPIO_PORTE_BASE) +#define ADC2_PIN (GPIO_PIN_1) + +#define ADC3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC3_PORT (GPIO_PORTE_BASE) +#define ADC3_PIN (GPIO_PIN_0) + +#define ADC4_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC4_PORT (GPIO_PORTD_BASE) +#define ADC4_PIN (GPIO_PIN_3) + +#define ADC5_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC5_PORT (GPIO_PORTD_BASE) +#define ADC5_PIN (GPIO_PIN_2) + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C0O_PORT (GPIO_PORTC_BASE) +#define C0O_PIN (GPIO_PIN_5) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1O_PORT (GPIO_PORTC_BASE) +#define C1O_PIN (GPIO_PIN_7) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_7) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CAN0RX_PORT (GPIO_PORTA_BASE) +#define CAN0RX_PIN (GPIO_PIN_4) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CAN0TX_PORT (GPIO_PORTA_BASE) +#define CAN0TX_PIN (GPIO_PIN_5) + +#define FAULT0_PERIPH (SYSCTL_PERIPH_GPIOE) +#define FAULT0_PORT (GPIO_PORTE_BASE) +#define FAULT0_PIN (GPIO_PIN_4) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define IDX0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define IDX0_PORT (GPIO_PORTD_BASE) +#define IDX0_PIN (GPIO_PIN_0) + +#define NMI_PERIPH (SYSCTL_PERIPH_GPIOB) +#define NMI_PORT (GPIO_PORTB_BASE) +#define NMI_PIN (GPIO_PIN_7) + +#define PHA0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHA0_PORT (GPIO_PORTC_BASE) +#define PHA0_PIN (GPIO_PIN_4) + +#define PHB0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHB0_PORT (GPIO_PORTC_BASE) +#define PHB0_PIN (GPIO_PIN_6) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOA) +#define PWM0_PORT (GPIO_PORTA_BASE) +#define PWM0_PIN (GPIO_PIN_6) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define PWM1_PORT (GPIO_PORTA_BASE) +#define PWM1_PIN (GPIO_PIN_7) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM2_PORT (GPIO_PORTB_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM3_PORT (GPIO_PORTB_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOA) +#define PWM4_PORT (GPIO_PORTA_BASE) +#define PWM4_PIN (GPIO_PIN_2) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOA) +#define PWM5_PORT (GPIO_PORTA_BASE) +#define PWM5_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S2616 + +//***************************************************************************** +// +// LM3S2620 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S2620 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C0O_PORT (GPIO_PORTF_BASE) +#define C0O_PIN (GPIO_PIN_4) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOE) +#define C1O_PORT (GPIO_PORTE_BASE) +#define C1O_PIN (GPIO_PIN_6) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define C2O_PERIPH (SYSCTL_PERIPH_GPIOE) +#define C2O_PORT (GPIO_PORTE_BASE) +#define C2O_PIN (GPIO_PIN_7) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_7) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CAN1RX_PERIPH (SYSCTL_PERIPH_GPIOF) +#define CAN1RX_PORT (GPIO_PORTF_BASE) +#define CAN1RX_PIN (GPIO_PIN_0) + +#define CAN1TX_PERIPH (SYSCTL_PERIPH_GPIOF) +#define CAN1TX_PORT (GPIO_PORTF_BASE) +#define CAN1TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP3_PORT (GPIO_PORTD_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP4_PORT (GPIO_PORTA_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP5_PORT (GPIO_PORTE_BASE) +#define CCP5_PIN (GPIO_PIN_5) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define IDX0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define IDX0_PORT (GPIO_PORTD_BASE) +#define IDX0_PIN (GPIO_PIN_7) + +#define PHA0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHA0_PORT (GPIO_PORTC_BASE) +#define PHA0_PIN (GPIO_PIN_4) + +#define PHB0_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PHB0_PORT (GPIO_PORTH_BASE) +#define PHB0_PIN (GPIO_PIN_3) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOG) +#define PWM0_PORT (GPIO_PORTG_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOG) +#define PWM1_PORT (GPIO_PORTG_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM2_PORT (GPIO_PORTD_BASE) +#define PWM2_PIN (GPIO_PIN_2) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM3_PORT (GPIO_PORTD_BASE) +#define PWM3_PIN (GPIO_PIN_3) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S2620 + +//***************************************************************************** +// +// LM3S2637 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S2637 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOD) +#define C0O_PORT (GPIO_PORTD_BASE) +#define C0O_PIN (GPIO_PIN_7) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C1O_PORT (GPIO_PORTF_BASE) +#define C1O_PIN (GPIO_PIN_5) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_7) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP3_PORT (GPIO_PORTD_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP4_PORT (GPIO_PORTA_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S2637 + +//***************************************************************************** +// +// LM3S2651 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S2651 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C0O_PORT (GPIO_PORTC_BASE) +#define C0O_PIN (GPIO_PIN_5) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP4_PORT (GPIO_PORTA_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP5_PORT (GPIO_PORTB_BASE) +#define CCP5_PIN (GPIO_PIN_5) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM0_PORT (GPIO_PORTF_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM1_PORT (GPIO_PORTF_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PWM2_PORT (GPIO_PORTH_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PWM3_PORT (GPIO_PORTH_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2RX_PORT (GPIO_PORTG_BASE) +#define U2RX_PIN (GPIO_PIN_0) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2TX_PORT (GPIO_PORTG_BASE) +#define U2TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S2651 + +//***************************************************************************** +// +// LM3S2671 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S2671 + +#define ADC0_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC0_PORT (GPIO_PORTE_BASE) +#define ADC0_PIN (GPIO_PIN_3) + +#define ADC1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC1_PORT (GPIO_PORTE_BASE) +#define ADC1_PIN (GPIO_PIN_2) + +#define ADC2_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC2_PORT (GPIO_PORTE_BASE) +#define ADC2_PIN (GPIO_PIN_1) + +#define ADC3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC3_PORT (GPIO_PORTE_BASE) +#define ADC3_PIN (GPIO_PIN_0) + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0O_PORT (GPIO_PORTB_BASE) +#define C0O_PIN (GPIO_PIN_6) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1O_PORT (GPIO_PORTC_BASE) +#define C1O_PIN (GPIO_PIN_7) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_7) + +#define C2O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2O_PORT (GPIO_PORTC_BASE) +#define C2O_PIN (GPIO_PIN_6) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_5) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP1_PORT (GPIO_PORTB_BASE) +#define CCP1_PIN (GPIO_PIN_1) + +#define FAULT0_PERIPH (SYSCTL_PERIPH_GPIOE) +#define FAULT0_PORT (GPIO_PORTE_BASE) +#define FAULT0_PIN (GPIO_PIN_4) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define NMI_PERIPH (SYSCTL_PERIPH_GPIOB) +#define NMI_PORT (GPIO_PORTB_BASE) +#define NMI_PIN (GPIO_PIN_7) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOA) +#define PWM0_PORT (GPIO_PORTA_BASE) +#define PWM0_PIN (GPIO_PIN_6) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define PWM1_PORT (GPIO_PORTA_BASE) +#define PWM1_PIN (GPIO_PIN_7) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S2671 + +//***************************************************************************** +// +// LM3S2678 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S2678 + +#define ADC0_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC0_PORT (GPIO_PORTE_BASE) +#define ADC0_PIN (GPIO_PIN_3) + +#define ADC1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC1_PORT (GPIO_PORTE_BASE) +#define ADC1_PIN (GPIO_PIN_2) + +#define ADC2_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC2_PORT (GPIO_PORTE_BASE) +#define ADC2_PIN (GPIO_PIN_1) + +#define ADC3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC3_PORT (GPIO_PORTE_BASE) +#define ADC3_PIN (GPIO_PIN_0) + +#define ADC4_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC4_PORT (GPIO_PORTD_BASE) +#define ADC4_PIN (GPIO_PIN_3) + +#define ADC5_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC5_PORT (GPIO_PORTD_BASE) +#define ADC5_PIN (GPIO_PIN_2) + +#define ADC6_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC6_PORT (GPIO_PORTD_BASE) +#define ADC6_PIN (GPIO_PIN_1) + +#define ADC7_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC7_PORT (GPIO_PORTD_BASE) +#define ADC7_PIN (GPIO_PIN_0) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CAN0RX_PORT (GPIO_PORTB_BASE) +#define CAN0RX_PIN (GPIO_PIN_4) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CAN0TX_PORT (GPIO_PORTB_BASE) +#define CAN0TX_PIN (GPIO_PIN_5) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP0_PORT (GPIO_PORTC_BASE) +#define CCP0_PIN (GPIO_PIN_6) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP1_PORT (GPIO_PORTC_BASE) +#define CCP1_PIN (GPIO_PIN_5) + +#define FAULT0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define FAULT0_PORT (GPIO_PORTB_BASE) +#define FAULT0_PIN (GPIO_PIN_3) + +#define FAULT1_PERIPH (SYSCTL_PERIPH_GPIOB) +#define FAULT1_PORT (GPIO_PORTB_BASE) +#define FAULT1_PIN (GPIO_PIN_6) + +#define IDX0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define IDX0_PORT (GPIO_PORTB_BASE) +#define IDX0_PIN (GPIO_PIN_2) + +#define NMI_PERIPH (SYSCTL_PERIPH_GPIOB) +#define NMI_PORT (GPIO_PORTB_BASE) +#define NMI_PIN (GPIO_PIN_7) + +#define PHA0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHA0_PORT (GPIO_PORTC_BASE) +#define PHA0_PIN (GPIO_PIN_4) + +#define PHB0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHB0_PORT (GPIO_PORTC_BASE) +#define PHB0_PIN (GPIO_PIN_7) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOA) +#define PWM0_PORT (GPIO_PORTA_BASE) +#define PWM0_PIN (GPIO_PIN_6) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define PWM1_PORT (GPIO_PORTA_BASE) +#define PWM1_PIN (GPIO_PIN_7) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM2_PORT (GPIO_PORTB_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM3_PORT (GPIO_PORTB_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S2678 + +//***************************************************************************** +// +// LM3S2730 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S2730 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOD) +#define C0O_PORT (GPIO_PORTD_BASE) +#define C0O_PIN (GPIO_PIN_7) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOE) +#define C1O_PORT (GPIO_PORTE_BASE) +#define C1O_PIN (GPIO_PIN_6) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S2730 + +//***************************************************************************** +// +// LM3S2739 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S2739 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C0O_PORT (GPIO_PORTC_BASE) +#define C0O_PIN (GPIO_PIN_5) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP4_PORT (GPIO_PORTA_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP5_PORT (GPIO_PORTB_BASE) +#define CCP5_PIN (GPIO_PIN_5) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define IDX0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define IDX0_PORT (GPIO_PORTD_BASE) +#define IDX0_PIN (GPIO_PIN_7) + +#define PHA0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHA0_PORT (GPIO_PORTC_BASE) +#define PHA0_PIN (GPIO_PIN_4) + +#define PHB0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHB0_PORT (GPIO_PORTC_BASE) +#define PHB0_PIN (GPIO_PIN_7) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM0_PORT (GPIO_PORTF_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM1_PORT (GPIO_PORTF_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PWM2_PORT (GPIO_PORTH_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PWM3_PORT (GPIO_PORTH_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM4_PORT (GPIO_PORTE_BASE) +#define PWM4_PIN (GPIO_PIN_0) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM5_PORT (GPIO_PORTE_BASE) +#define PWM5_PIN (GPIO_PIN_1) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S2739 + +//***************************************************************************** +// +// LM3S2776 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S2776 + +#define ADC0_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC0_PORT (GPIO_PORTE_BASE) +#define ADC0_PIN (GPIO_PIN_3) + +#define ADC1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC1_PORT (GPIO_PORTE_BASE) +#define ADC1_PIN (GPIO_PIN_2) + +#define ADC2_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC2_PORT (GPIO_PORTE_BASE) +#define ADC2_PIN (GPIO_PIN_1) + +#define ADC3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC3_PORT (GPIO_PORTE_BASE) +#define ADC3_PIN (GPIO_PIN_0) + +#define ADC4_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC4_PORT (GPIO_PORTD_BASE) +#define ADC4_PIN (GPIO_PIN_3) + +#define ADC5_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC5_PORT (GPIO_PORTD_BASE) +#define ADC5_PIN (GPIO_PIN_2) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CAN0RX_PORT (GPIO_PORTB_BASE) +#define CAN0RX_PIN (GPIO_PIN_4) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CAN0TX_PORT (GPIO_PORTB_BASE) +#define CAN0TX_PIN (GPIO_PIN_5) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP0_PORT (GPIO_PORTC_BASE) +#define CCP0_PIN (GPIO_PIN_7) + +#define FAULT0_PERIPH (SYSCTL_PERIPH_GPIOE) +#define FAULT0_PORT (GPIO_PORTE_BASE) +#define FAULT0_PIN (GPIO_PIN_4) + +#define FAULT1_PERIPH (SYSCTL_PERIPH_GPIOB) +#define FAULT1_PORT (GPIO_PORTB_BASE) +#define FAULT1_PIN (GPIO_PIN_6) + +#define FAULT2_PERIPH (SYSCTL_PERIPH_GPIOC) +#define FAULT2_PORT (GPIO_PORTC_BASE) +#define FAULT2_PIN (GPIO_PIN_5) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define NMI_PERIPH (SYSCTL_PERIPH_GPIOB) +#define NMI_PORT (GPIO_PORTB_BASE) +#define NMI_PIN (GPIO_PIN_7) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM2_PORT (GPIO_PORTB_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM3_PORT (GPIO_PORTB_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOA) +#define PWM4_PORT (GPIO_PORTA_BASE) +#define PWM4_PIN (GPIO_PIN_6) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOA) +#define PWM5_PORT (GPIO_PORTA_BASE) +#define PWM5_PIN (GPIO_PIN_7) + +#define PWM6_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PWM6_PORT (GPIO_PORTC_BASE) +#define PWM6_PIN (GPIO_PIN_4) + +#define PWM7_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PWM7_PORT (GPIO_PORTC_BASE) +#define PWM7_PIN (GPIO_PIN_6) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S2776 + +//***************************************************************************** +// +// LM3S2911 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S2911 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C0O_PORT (GPIO_PORTF_BASE) +#define C0O_PIN (GPIO_PIN_4) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOE) +#define C1O_PORT (GPIO_PORTE_BASE) +#define C1O_PIN (GPIO_PIN_6) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP1_PORT (GPIO_PORTD_BASE) +#define CCP1_PIN (GPIO_PIN_7) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define CCP6_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP6_PORT (GPIO_PORTH_BASE) +#define CCP6_PIN (GPIO_PIN_0) + +#define CCP7_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP7_PORT (GPIO_PORTH_BASE) +#define CCP7_PIN (GPIO_PIN_1) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define I2C1SCL_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SCL_PORT (GPIO_PORTA_BASE) +#define I2C1SCL_PIN (GPIO_PIN_6) + +#define I2C1SDA_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SDA_PORT (GPIO_PORTA_BASE) +#define I2C1SDA_PIN (GPIO_PIN_7) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2RX_PORT (GPIO_PORTG_BASE) +#define U2RX_PIN (GPIO_PIN_0) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2TX_PORT (GPIO_PORTG_BASE) +#define U2TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S2911 + +//***************************************************************************** +// +// LM3S2918 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S2918 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C0O_PORT (GPIO_PORTF_BASE) +#define C0O_PIN (GPIO_PIN_4) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C1O_PORT (GPIO_PORTF_BASE) +#define C1O_PIN (GPIO_PIN_5) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define CCP1_PORT (GPIO_PORTF_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define CCP6_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP6_PORT (GPIO_PORTH_BASE) +#define CCP6_PIN (GPIO_PIN_0) + +#define CCP7_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP7_PORT (GPIO_PORTH_BASE) +#define CCP7_PIN (GPIO_PIN_1) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define I2C1SCL_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SCL_PORT (GPIO_PORTA_BASE) +#define I2C1SCL_PIN (GPIO_PIN_6) + +#define I2C1SDA_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SDA_PORT (GPIO_PORTA_BASE) +#define I2C1SDA_PIN (GPIO_PIN_7) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S2918 + +//***************************************************************************** +// +// LM3S2939 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S2939 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C0O_PORT (GPIO_PORTF_BASE) +#define C0O_PIN (GPIO_PIN_4) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C1O_PORT (GPIO_PORTF_BASE) +#define C1O_PIN (GPIO_PIN_5) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_7) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP3_PORT (GPIO_PORTD_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define IDX0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define IDX0_PORT (GPIO_PORTD_BASE) +#define IDX0_PIN (GPIO_PIN_7) + +#define PHA0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHA0_PORT (GPIO_PORTC_BASE) +#define PHA0_PIN (GPIO_PIN_4) + +#define PHB0_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PHB0_PORT (GPIO_PORTH_BASE) +#define PHB0_PIN (GPIO_PIN_3) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM0_PORT (GPIO_PORTF_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM1_PORT (GPIO_PORTF_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PWM2_PORT (GPIO_PORTH_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PWM3_PORT (GPIO_PORTH_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2RX_PORT (GPIO_PORTG_BASE) +#define U2RX_PIN (GPIO_PIN_0) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2TX_PORT (GPIO_PORTG_BASE) +#define U2TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S2939 + +//***************************************************************************** +// +// LM3S2948 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S2948 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C0O_PORT (GPIO_PORTF_BASE) +#define C0O_PIN (GPIO_PIN_4) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_7) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CAN1RX_PERIPH (SYSCTL_PERIPH_GPIOF) +#define CAN1RX_PORT (GPIO_PORTF_BASE) +#define CAN1RX_PIN (GPIO_PIN_0) + +#define CAN1TX_PERIPH (SYSCTL_PERIPH_GPIOF) +#define CAN1TX_PORT (GPIO_PORTF_BASE) +#define CAN1TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOG) +#define CCP3_PORT (GPIO_PORTG_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP4_PORT (GPIO_PORTA_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define CCP6_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP6_PORT (GPIO_PORTH_BASE) +#define CCP6_PIN (GPIO_PIN_0) + +#define CCP7_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP7_PORT (GPIO_PORTH_BASE) +#define CCP7_PIN (GPIO_PIN_1) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2RX_PORT (GPIO_PORTG_BASE) +#define U2RX_PIN (GPIO_PIN_0) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2TX_PORT (GPIO_PORTG_BASE) +#define U2TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S2948 + +//***************************************************************************** +// +// LM3S2950 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S2950 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C0O_PORT (GPIO_PORTF_BASE) +#define C0O_PIN (GPIO_PIN_4) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C1O_PORT (GPIO_PORTF_BASE) +#define C1O_PIN (GPIO_PIN_5) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define C2O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C2O_PORT (GPIO_PORTF_BASE) +#define C2O_PIN (GPIO_PIN_6) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_7) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CAN1RX_PERIPH (SYSCTL_PERIPH_GPIOF) +#define CAN1RX_PORT (GPIO_PORTF_BASE) +#define CAN1RX_PIN (GPIO_PIN_0) + +#define CAN1TX_PERIPH (SYSCTL_PERIPH_GPIOF) +#define CAN1TX_PORT (GPIO_PORTF_BASE) +#define CAN1TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP3_PORT (GPIO_PORTD_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP4_PORT (GPIO_PORTA_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP5_PORT (GPIO_PORTE_BASE) +#define CCP5_PIN (GPIO_PIN_5) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define IDX0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define IDX0_PORT (GPIO_PORTD_BASE) +#define IDX0_PIN (GPIO_PIN_7) + +#define PHA0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHA0_PORT (GPIO_PORTC_BASE) +#define PHA0_PIN (GPIO_PIN_4) + +#define PHB0_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PHB0_PORT (GPIO_PORTH_BASE) +#define PHB0_PIN (GPIO_PIN_3) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOG) +#define PWM0_PORT (GPIO_PORTG_BASE) +#define PWM0_PIN (GPIO_PIN_2) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOG) +#define PWM1_PORT (GPIO_PORTG_BASE) +#define PWM1_PIN (GPIO_PIN_3) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PWM2_PORT (GPIO_PORTH_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PWM3_PORT (GPIO_PORTH_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM4_PORT (GPIO_PORTE_BASE) +#define PWM4_PIN (GPIO_PIN_6) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM5_PORT (GPIO_PORTE_BASE) +#define PWM5_PIN (GPIO_PIN_7) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2RX_PORT (GPIO_PORTG_BASE) +#define U2RX_PIN (GPIO_PIN_0) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2TX_PORT (GPIO_PORTG_BASE) +#define U2TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S2950 + +//***************************************************************************** +// +// LM3S2965 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S2965 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C0O_PORT (GPIO_PORTF_BASE) +#define C0O_PIN (GPIO_PIN_4) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_7) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CAN1RX_PERIPH (SYSCTL_PERIPH_GPIOF) +#define CAN1RX_PORT (GPIO_PORTF_BASE) +#define CAN1RX_PIN (GPIO_PIN_0) + +#define CAN1TX_PERIPH (SYSCTL_PERIPH_GPIOF) +#define CAN1TX_PORT (GPIO_PORTF_BASE) +#define CAN1TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define CCP1_PORT (GPIO_PORTF_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP3_PORT (GPIO_PORTD_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP4_PORT (GPIO_PORTD_BASE) +#define CCP4_PIN (GPIO_PIN_5) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOG) +#define CCP5_PORT (GPIO_PORTG_BASE) +#define CCP5_PIN (GPIO_PIN_5) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define I2C1SCL_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SCL_PORT (GPIO_PORTA_BASE) +#define I2C1SCL_PIN (GPIO_PIN_6) + +#define I2C1SDA_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SDA_PORT (GPIO_PORTA_BASE) +#define I2C1SDA_PIN (GPIO_PIN_7) + +#define IDX0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define IDX0_PORT (GPIO_PORTD_BASE) +#define IDX0_PIN (GPIO_PIN_7) + +#define IDX1_PERIPH (SYSCTL_PERIPH_GPIOH) +#define IDX1_PORT (GPIO_PORTH_BASE) +#define IDX1_PIN (GPIO_PIN_2) + +#define PHA0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHA0_PORT (GPIO_PORTC_BASE) +#define PHA0_PIN (GPIO_PIN_4) + +#define PHA1_PERIPH (SYSCTL_PERIPH_GPIOG) +#define PHA1_PORT (GPIO_PORTG_BASE) +#define PHA1_PIN (GPIO_PIN_6) + +#define PHB0_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PHB0_PORT (GPIO_PORTH_BASE) +#define PHB0_PIN (GPIO_PIN_3) + +#define PHB1_PERIPH (SYSCTL_PERIPH_GPIOG) +#define PHB1_PORT (GPIO_PORTG_BASE) +#define PHB1_PIN (GPIO_PIN_7) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOG) +#define PWM0_PORT (GPIO_PORTG_BASE) +#define PWM0_PIN (GPIO_PIN_2) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOG) +#define PWM1_PORT (GPIO_PORTG_BASE) +#define PWM1_PIN (GPIO_PIN_3) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PWM2_PORT (GPIO_PORTH_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PWM3_PORT (GPIO_PORTH_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM4_PORT (GPIO_PORTF_BASE) +#define PWM4_PIN (GPIO_PIN_2) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM5_PORT (GPIO_PORTF_BASE) +#define PWM5_PIN (GPIO_PIN_3) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2RX_PORT (GPIO_PORTG_BASE) +#define U2RX_PIN (GPIO_PIN_0) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2TX_PORT (GPIO_PORTG_BASE) +#define U2TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S2965 + +//***************************************************************************** +// +// LM3S3651 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S3651 + +#define ADC0_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC0_PORT (GPIO_PORTE_BASE) +#define ADC0_PIN (GPIO_PIN_3) + +#define ADC1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC1_PORT (GPIO_PORTE_BASE) +#define ADC1_PIN (GPIO_PIN_2) + +#define ADC2_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC2_PORT (GPIO_PORTE_BASE) +#define ADC2_PIN (GPIO_PIN_1) + +#define ADC3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC3_PORT (GPIO_PORTE_BASE) +#define ADC3_PIN (GPIO_PIN_0) + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0O_PORT (GPIO_PORTB_BASE) +#define C0O_PIN (GPIO_PIN_6) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_7) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP0_PORT (GPIO_PORTD_BASE) +#define CCP0_PIN (GPIO_PIN_3) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP2_PORT (GPIO_PORTC_BASE) +#define CCP2_PIN (GPIO_PIN_4) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP3_PORT (GPIO_PORTE_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP4_PORT (GPIO_PORTA_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP5_PORT (GPIO_PORTD_BASE) +#define CCP5_PIN (GPIO_PIN_2) + +#define CCP6_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP6_PORT (GPIO_PORTD_BASE) +#define CCP6_PIN (GPIO_PIN_0) + +#define CCP7_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP7_PORT (GPIO_PORTD_BASE) +#define CCP7_PIN (GPIO_PIN_1) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define NMI_PERIPH (SYSCTL_PERIPH_GPIOB) +#define NMI_PORT (GPIO_PORTB_BASE) +#define NMI_PIN (GPIO_PIN_7) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define USB0EPEN_PERIPH (SYSCTL_PERIPH_GPIOC) +#define USB0EPEN_PORT (GPIO_PORTC_BASE) +#define USB0EPEN_PIN (GPIO_PIN_5) + +#define USB0ID_PERIPH (SYSCTL_PERIPH_GPIOB) +#define USB0ID_PORT (GPIO_PORTB_BASE) +#define USB0ID_PIN (GPIO_PIN_0) + +#define USB0PFLT_PERIPH (SYSCTL_PERIPH_GPIOC) +#define USB0PFLT_PORT (GPIO_PORTC_BASE) +#define USB0PFLT_PIN (GPIO_PIN_6) + +#define USB0VBUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define USB0VBUS_PORT (GPIO_PORTB_BASE) +#define USB0VBUS_PIN (GPIO_PIN_1) + +#endif // PART_LM3S3651 + +//***************************************************************************** +// +// LM3S3739 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S3739 + +#define ADC0_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC0_PORT (GPIO_PORTE_BASE) +#define ADC0_PIN (GPIO_PIN_7) + +#define ADC1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC1_PORT (GPIO_PORTE_BASE) +#define ADC1_PIN (GPIO_PIN_6) + +#define ADC2_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC2_PORT (GPIO_PORTE_BASE) +#define ADC2_PIN (GPIO_PIN_5) + +#define ADC3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC3_PORT (GPIO_PORTE_BASE) +#define ADC3_PIN (GPIO_PIN_4) + +#define ADC4_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC4_PORT (GPIO_PORTD_BASE) +#define ADC4_PIN (GPIO_PIN_7) + +#define ADC5_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC5_PORT (GPIO_PORTD_BASE) +#define ADC5_PIN (GPIO_PIN_6) + +#define ADC6_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC6_PORT (GPIO_PORTD_BASE) +#define ADC6_PIN (GPIO_PIN_5) + +#define ADC7_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC7_PORT (GPIO_PORTD_BASE) +#define ADC7_PIN (GPIO_PIN_4) + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C0O_PORT (GPIO_PORTF_BASE) +#define C0O_PIN (GPIO_PIN_4) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C1O_PORT (GPIO_PORTF_BASE) +#define C1O_PIN (GPIO_PIN_5) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP0_PORT (GPIO_PORTC_BASE) +#define CCP0_PIN (GPIO_PIN_6) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define CCP1_PORT (GPIO_PORTF_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP2_PORT (GPIO_PORTC_BASE) +#define CCP2_PIN (GPIO_PIN_4) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOG) +#define CCP3_PORT (GPIO_PORTG_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP5_PORT (GPIO_PORTD_BASE) +#define CCP5_PIN (GPIO_PIN_2) + +#define CCP6_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP6_PORT (GPIO_PORTH_BASE) +#define CCP6_PIN (GPIO_PIN_0) + +#define CCP7_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP7_PORT (GPIO_PORTD_BASE) +#define CCP7_PIN (GPIO_PIN_3) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define I2C1SCL_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SCL_PORT (GPIO_PORTA_BASE) +#define I2C1SCL_PIN (GPIO_PIN_6) + +#define I2C1SDA_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SDA_PORT (GPIO_PORTA_BASE) +#define I2C1SDA_PIN (GPIO_PIN_7) + +#define NMI_PERIPH (SYSCTL_PERIPH_GPIOB) +#define NMI_PORT (GPIO_PORTB_BASE) +#define NMI_PIN (GPIO_PIN_7) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOB) +#define U1RX_PORT (GPIO_PORTB_BASE) +#define U1RX_PIN (GPIO_PIN_0) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOB) +#define U1TX_PORT (GPIO_PORTB_BASE) +#define U1TX_PIN (GPIO_PIN_1) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U2RX_PORT (GPIO_PORTD_BASE) +#define U2RX_PIN (GPIO_PIN_0) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U2TX_PORT (GPIO_PORTD_BASE) +#define U2TX_PIN (GPIO_PIN_1) + +#define USB0EPEN_PERIPH (SYSCTL_PERIPH_GPIOH) +#define USB0EPEN_PORT (GPIO_PORTH_BASE) +#define USB0EPEN_PIN (GPIO_PIN_3) + +#define USB0PFLT_PERIPH (SYSCTL_PERIPH_GPIOH) +#define USB0PFLT_PORT (GPIO_PORTH_BASE) +#define USB0PFLT_PIN (GPIO_PIN_4) + +#endif // PART_LM3S3739 + +//***************************************************************************** +// +// LM3S3748 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S3748 + +#define ADC0_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC0_PORT (GPIO_PORTE_BASE) +#define ADC0_PIN (GPIO_PIN_7) + +#define ADC1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC1_PORT (GPIO_PORTE_BASE) +#define ADC1_PIN (GPIO_PIN_6) + +#define ADC2_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC2_PORT (GPIO_PORTE_BASE) +#define ADC2_PIN (GPIO_PIN_5) + +#define ADC3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC3_PORT (GPIO_PORTE_BASE) +#define ADC3_PIN (GPIO_PIN_4) + +#define ADC4_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC4_PORT (GPIO_PORTD_BASE) +#define ADC4_PIN (GPIO_PIN_7) + +#define ADC5_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC5_PORT (GPIO_PORTD_BASE) +#define ADC5_PIN (GPIO_PIN_6) + +#define ADC6_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC6_PORT (GPIO_PORTD_BASE) +#define ADC6_PIN (GPIO_PIN_5) + +#define ADC7_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC7_PORT (GPIO_PORTD_BASE) +#define ADC7_PIN (GPIO_PIN_4) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP0_PORT (GPIO_PORTD_BASE) +#define CCP0_PIN (GPIO_PIN_3) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define CCP1_PORT (GPIO_PORTF_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOF) +#define CCP2_PORT (GPIO_PORTF_BASE) +#define CCP2_PIN (GPIO_PIN_5) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOG) +#define CCP3_PORT (GPIO_PORTG_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_4) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP5_PORT (GPIO_PORTD_BASE) +#define CCP5_PIN (GPIO_PIN_2) + +#define CCP6_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP6_PORT (GPIO_PORTH_BASE) +#define CCP6_PIN (GPIO_PIN_0) + +#define CCP7_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP7_PORT (GPIO_PORTH_BASE) +#define CCP7_PIN (GPIO_PIN_1) + +#define FAULT0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define FAULT0_PORT (GPIO_PORTF_BASE) +#define FAULT0_PIN (GPIO_PIN_4) + +#define FAULT1_PERIPH (SYSCTL_PERIPH_GPIOG) +#define FAULT1_PORT (GPIO_PORTG_BASE) +#define FAULT1_PIN (GPIO_PIN_5) + +#define FAULT2_PERIPH (SYSCTL_PERIPH_GPIOG) +#define FAULT2_PORT (GPIO_PORTG_BASE) +#define FAULT2_PIN (GPIO_PIN_3) + +#define FAULT3_PERIPH (SYSCTL_PERIPH_GPIOH) +#define FAULT3_PORT (GPIO_PORTH_BASE) +#define FAULT3_PIN (GPIO_PIN_2) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define I2C1SCL_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SCL_PORT (GPIO_PORTA_BASE) +#define I2C1SCL_PIN (GPIO_PIN_6) + +#define I2C1SDA_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SDA_PORT (GPIO_PORTA_BASE) +#define I2C1SDA_PIN (GPIO_PIN_7) + +#define IDX0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define IDX0_PORT (GPIO_PORTD_BASE) +#define IDX0_PIN (GPIO_PIN_0) + +#define NMI_PERIPH (SYSCTL_PERIPH_GPIOB) +#define NMI_PORT (GPIO_PORTB_BASE) +#define NMI_PIN (GPIO_PIN_7) + +#define PHA0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PHA0_PORT (GPIO_PORTD_BASE) +#define PHA0_PIN (GPIO_PIN_1) + +#define PHB0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PHB0_PORT (GPIO_PORTF_BASE) +#define PHB0_PIN (GPIO_PIN_7) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM0_PORT (GPIO_PORTF_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM1_PORT (GPIO_PORTF_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM2_PORT (GPIO_PORTF_BASE) +#define PWM2_PIN (GPIO_PIN_2) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM3_PORT (GPIO_PORTF_BASE) +#define PWM3_PIN (GPIO_PIN_3) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOG) +#define PWM4_PORT (GPIO_PORTG_BASE) +#define PWM4_PIN (GPIO_PIN_0) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOG) +#define PWM5_PORT (GPIO_PORTG_BASE) +#define PWM5_PIN (GPIO_PIN_1) + +#define PWM6_PERIPH (SYSCTL_PERIPH_GPIOG) +#define PWM6_PORT (GPIO_PORTG_BASE) +#define PWM6_PIN (GPIO_PIN_6) + +#define PWM7_PERIPH (SYSCTL_PERIPH_GPIOG) +#define PWM7_PORT (GPIO_PORTG_BASE) +#define PWM7_PIN (GPIO_PIN_7) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOC) +#define U1RX_PORT (GPIO_PORTC_BASE) +#define U1RX_PIN (GPIO_PIN_6) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOC) +#define U1TX_PORT (GPIO_PORTC_BASE) +#define U1TX_PIN (GPIO_PIN_7) + +#define USB0EPEN_PERIPH (SYSCTL_PERIPH_GPIOH) +#define USB0EPEN_PORT (GPIO_PORTH_BASE) +#define USB0EPEN_PIN (GPIO_PIN_3) + +#define USB0PFLT_PERIPH (SYSCTL_PERIPH_GPIOH) +#define USB0PFLT_PORT (GPIO_PORTH_BASE) +#define USB0PFLT_PIN (GPIO_PIN_4) + +#endif // PART_LM3S3748 + +//***************************************************************************** +// +// LM3S3749 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S3749 + +#define ADC0_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC0_PORT (GPIO_PORTE_BASE) +#define ADC0_PIN (GPIO_PIN_7) + +#define ADC1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC1_PORT (GPIO_PORTE_BASE) +#define ADC1_PIN (GPIO_PIN_6) + +#define ADC2_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC2_PORT (GPIO_PORTE_BASE) +#define ADC2_PIN (GPIO_PIN_5) + +#define ADC3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC3_PORT (GPIO_PORTE_BASE) +#define ADC3_PIN (GPIO_PIN_4) + +#define ADC4_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC4_PORT (GPIO_PORTD_BASE) +#define ADC4_PIN (GPIO_PIN_7) + +#define ADC5_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC5_PORT (GPIO_PORTD_BASE) +#define ADC5_PIN (GPIO_PIN_6) + +#define ADC6_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC6_PORT (GPIO_PORTD_BASE) +#define ADC6_PIN (GPIO_PIN_5) + +#define ADC7_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC7_PORT (GPIO_PORTD_BASE) +#define ADC7_PIN (GPIO_PIN_4) + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C0O_PORT (GPIO_PORTF_BASE) +#define C0O_PIN (GPIO_PIN_4) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1O_PORT (GPIO_PORTC_BASE) +#define C1O_PIN (GPIO_PIN_7) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP0_PORT (GPIO_PORTD_BASE) +#define CCP0_PIN (GPIO_PIN_3) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOF) +#define CCP2_PORT (GPIO_PORTF_BASE) +#define CCP2_PIN (GPIO_PIN_5) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP3_PORT (GPIO_PORTA_BASE) +#define CCP3_PIN (GPIO_PIN_7) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOF) +#define CCP4_PORT (GPIO_PORTF_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define CCP6_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP6_PORT (GPIO_PORTD_BASE) +#define CCP6_PIN (GPIO_PIN_2) + +#define FAULT0_PERIPH (SYSCTL_PERIPH_GPIOG) +#define FAULT0_PORT (GPIO_PORTG_BASE) +#define FAULT0_PIN (GPIO_PIN_2) + +#define FAULT1_PERIPH (SYSCTL_PERIPH_GPIOG) +#define FAULT1_PORT (GPIO_PORTG_BASE) +#define FAULT1_PIN (GPIO_PIN_4) + +#define FAULT2_PERIPH (SYSCTL_PERIPH_GPIOG) +#define FAULT2_PORT (GPIO_PORTG_BASE) +#define FAULT2_PIN (GPIO_PIN_3) + +#define FAULT3_PERIPH (SYSCTL_PERIPH_GPIOH) +#define FAULT3_PORT (GPIO_PORTH_BASE) +#define FAULT3_PIN (GPIO_PIN_2) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define I2C1SCL_PERIPH (SYSCTL_PERIPH_GPIOG) +#define I2C1SCL_PORT (GPIO_PORTG_BASE) +#define I2C1SCL_PIN (GPIO_PIN_0) + +#define I2C1SDA_PERIPH (SYSCTL_PERIPH_GPIOG) +#define I2C1SDA_PORT (GPIO_PORTG_BASE) +#define I2C1SDA_PIN (GPIO_PIN_1) + +#define IDX0_PERIPH (SYSCTL_PERIPH_GPIOG) +#define IDX0_PORT (GPIO_PORTG_BASE) +#define IDX0_PIN (GPIO_PIN_5) + +#define NMI_PERIPH (SYSCTL_PERIPH_GPIOB) +#define NMI_PORT (GPIO_PORTB_BASE) +#define NMI_PIN (GPIO_PIN_7) + +#define PHA0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PHA0_PORT (GPIO_PORTF_BASE) +#define PHA0_PIN (GPIO_PIN_6) + +#define PHB0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHB0_PORT (GPIO_PORTC_BASE) +#define PHB0_PIN (GPIO_PIN_6) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM0_PORT (GPIO_PORTF_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM1_PORT (GPIO_PORTF_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PWM2_PORT (GPIO_PORTH_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PWM3_PORT (GPIO_PORTH_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM4_PORT (GPIO_PORTF_BASE) +#define PWM4_PIN (GPIO_PIN_2) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM5_PORT (GPIO_PORTF_BASE) +#define PWM5_PIN (GPIO_PIN_3) + +#define PWM6_PERIPH (SYSCTL_PERIPH_GPIOG) +#define PWM6_PORT (GPIO_PORTG_BASE) +#define PWM6_PIN (GPIO_PIN_6) + +#define PWM7_PERIPH (SYSCTL_PERIPH_GPIOG) +#define PWM7_PORT (GPIO_PORTG_BASE) +#define PWM7_PIN (GPIO_PIN_7) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOB) +#define U1RX_PORT (GPIO_PORTB_BASE) +#define U1RX_PIN (GPIO_PIN_0) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOB) +#define U1TX_PORT (GPIO_PORTB_BASE) +#define U1TX_PIN (GPIO_PIN_1) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U2RX_PORT (GPIO_PORTD_BASE) +#define U2RX_PIN (GPIO_PIN_0) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U2TX_PORT (GPIO_PORTD_BASE) +#define U2TX_PIN (GPIO_PIN_1) + +#define USB0EPEN_PERIPH (SYSCTL_PERIPH_GPIOH) +#define USB0EPEN_PORT (GPIO_PORTH_BASE) +#define USB0EPEN_PIN (GPIO_PIN_3) + +#define USB0PFLT_PERIPH (SYSCTL_PERIPH_GPIOH) +#define USB0PFLT_PORT (GPIO_PORTH_BASE) +#define USB0PFLT_PIN (GPIO_PIN_4) + +#endif // PART_LM3S3749 + +//***************************************************************************** +// +// LM3S5632 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S5632 + +#define ADC0_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC0_PORT (GPIO_PORTE_BASE) +#define ADC0_PIN (GPIO_PIN_3) + +#define ADC1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC1_PORT (GPIO_PORTE_BASE) +#define ADC1_PIN (GPIO_PIN_2) + +#define ADC2_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC2_PORT (GPIO_PORTE_BASE) +#define ADC2_PIN (GPIO_PIN_1) + +#define ADC3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC3_PORT (GPIO_PORTE_BASE) +#define ADC3_PIN (GPIO_PIN_0) + +#define ADC4_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC4_PORT (GPIO_PORTD_BASE) +#define ADC4_PIN (GPIO_PIN_3) + +#define ADC5_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC5_PORT (GPIO_PORTD_BASE) +#define ADC5_PIN (GPIO_PIN_2) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_5) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP1_PORT (GPIO_PORTB_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP2_PORT (GPIO_PORTC_BASE) +#define CCP2_PIN (GPIO_PIN_4) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP3_PORT (GPIO_PORTE_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define I2C1SCL_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SCL_PORT (GPIO_PORTA_BASE) +#define I2C1SCL_PIN (GPIO_PIN_6) + +#define I2C1SDA_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SDA_PORT (GPIO_PORTA_BASE) +#define I2C1SDA_PIN (GPIO_PIN_7) + +#define NMI_PERIPH (SYSCTL_PERIPH_GPIOB) +#define NMI_PORT (GPIO_PORTB_BASE) +#define NMI_PIN (GPIO_PIN_7) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOB) +#define U1RX_PORT (GPIO_PORTB_BASE) +#define U1RX_PIN (GPIO_PIN_0) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOB) +#define U1TX_PORT (GPIO_PORTB_BASE) +#define U1TX_PIN (GPIO_PIN_1) + +#define USB0EPEN_PERIPH (SYSCTL_PERIPH_GPIOC) +#define USB0EPEN_PORT (GPIO_PORTC_BASE) +#define USB0EPEN_PIN (GPIO_PIN_5) + +#define USB0PFLT_PERIPH (SYSCTL_PERIPH_GPIOC) +#define USB0PFLT_PORT (GPIO_PORTC_BASE) +#define USB0PFLT_PIN (GPIO_PIN_6) + +#endif // PART_LM3S5632 + +//***************************************************************************** +// +// LM3S5652 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S5652 + +#define ADC0_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC0_PORT (GPIO_PORTE_BASE) +#define ADC0_PIN (GPIO_PIN_3) + +#define ADC1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC1_PORT (GPIO_PORTE_BASE) +#define ADC1_PIN (GPIO_PIN_2) + +#define ADC2_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC2_PORT (GPIO_PORTE_BASE) +#define ADC2_PIN (GPIO_PIN_1) + +#define ADC3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC3_PORT (GPIO_PORTE_BASE) +#define ADC3_PIN (GPIO_PIN_0) + +#define ADC4_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC4_PORT (GPIO_PORTD_BASE) +#define ADC4_PIN (GPIO_PIN_3) + +#define ADC5_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC5_PORT (GPIO_PORTD_BASE) +#define ADC5_PIN (GPIO_PIN_2) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_5) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP2_PORT (GPIO_PORTE_BASE) +#define CCP2_PIN (GPIO_PIN_4) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP3_PORT (GPIO_PORTA_BASE) +#define CCP3_PIN (GPIO_PIN_7) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define NMI_PERIPH (SYSCTL_PERIPH_GPIOB) +#define NMI_PORT (GPIO_PORTB_BASE) +#define NMI_PIN (GPIO_PIN_7) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define USB0EPEN_PERIPH (SYSCTL_PERIPH_GPIOC) +#define USB0EPEN_PORT (GPIO_PORTC_BASE) +#define USB0EPEN_PIN (GPIO_PIN_5) + +#define USB0ID_PERIPH (SYSCTL_PERIPH_GPIOB) +#define USB0ID_PORT (GPIO_PORTB_BASE) +#define USB0ID_PIN (GPIO_PIN_0) + +#define USB0PFLT_PERIPH (SYSCTL_PERIPH_GPIOC) +#define USB0PFLT_PORT (GPIO_PORTC_BASE) +#define USB0PFLT_PIN (GPIO_PIN_6) + +#define USB0VBUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define USB0VBUS_PORT (GPIO_PORTB_BASE) +#define USB0VBUS_PIN (GPIO_PIN_1) + +#endif // PART_LM3S5652 + +//***************************************************************************** +// +// LM3S5662 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S5662 + +#define ADC0_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC0_PORT (GPIO_PORTE_BASE) +#define ADC0_PIN (GPIO_PIN_3) + +#define ADC1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC1_PORT (GPIO_PORTE_BASE) +#define ADC1_PIN (GPIO_PIN_2) + +#define ADC2_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC2_PORT (GPIO_PORTE_BASE) +#define ADC2_PIN (GPIO_PIN_1) + +#define ADC3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC3_PORT (GPIO_PORTE_BASE) +#define ADC3_PIN (GPIO_PIN_0) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CAN0RX_PORT (GPIO_PORTB_BASE) +#define CAN0RX_PIN (GPIO_PIN_4) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CAN0TX_PORT (GPIO_PORTB_BASE) +#define CAN0TX_PIN (GPIO_PIN_5) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_2) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP1_PORT (GPIO_PORTB_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP2_PORT (GPIO_PORTC_BASE) +#define CCP2_PIN (GPIO_PIN_4) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP3_PORT (GPIO_PORTE_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define FAULT0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define FAULT0_PORT (GPIO_PORTB_BASE) +#define FAULT0_PIN (GPIO_PIN_3) + +#define NMI_PERIPH (SYSCTL_PERIPH_GPIOB) +#define NMI_PORT (GPIO_PORTB_BASE) +#define NMI_PIN (GPIO_PIN_7) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM2_PORT (GPIO_PORTD_BASE) +#define PWM2_PIN (GPIO_PIN_2) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM3_PORT (GPIO_PORTD_BASE) +#define PWM3_PIN (GPIO_PIN_3) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOA) +#define PWM4_PORT (GPIO_PORTA_BASE) +#define PWM4_PIN (GPIO_PIN_6) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOA) +#define PWM5_PORT (GPIO_PORTA_BASE) +#define PWM5_PIN (GPIO_PIN_7) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define USB0EPEN_PERIPH (SYSCTL_PERIPH_GPIOC) +#define USB0EPEN_PORT (GPIO_PORTC_BASE) +#define USB0EPEN_PIN (GPIO_PIN_5) + +#define USB0ID_PERIPH (SYSCTL_PERIPH_GPIOB) +#define USB0ID_PORT (GPIO_PORTB_BASE) +#define USB0ID_PIN (GPIO_PIN_0) + +#define USB0PFLT_PERIPH (SYSCTL_PERIPH_GPIOC) +#define USB0PFLT_PORT (GPIO_PORTC_BASE) +#define USB0PFLT_PIN (GPIO_PIN_6) + +#define USB0VBUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define USB0VBUS_PORT (GPIO_PORTB_BASE) +#define USB0VBUS_PIN (GPIO_PIN_1) + +#endif // PART_LM3S5662 + +//***************************************************************************** +// +// LM3S5732 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S5732 + +#define ADC0_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC0_PORT (GPIO_PORTE_BASE) +#define ADC0_PIN (GPIO_PIN_3) + +#define ADC1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC1_PORT (GPIO_PORTE_BASE) +#define ADC1_PIN (GPIO_PIN_2) + +#define ADC2_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC2_PORT (GPIO_PORTE_BASE) +#define ADC2_PIN (GPIO_PIN_1) + +#define ADC3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC3_PORT (GPIO_PORTE_BASE) +#define ADC3_PIN (GPIO_PIN_0) + +#define ADC4_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC4_PORT (GPIO_PORTD_BASE) +#define ADC4_PIN (GPIO_PIN_3) + +#define ADC5_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC5_PORT (GPIO_PORTD_BASE) +#define ADC5_PIN (GPIO_PIN_2) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_5) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP1_PORT (GPIO_PORTB_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP2_PORT (GPIO_PORTC_BASE) +#define CCP2_PIN (GPIO_PIN_4) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP3_PORT (GPIO_PORTE_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define I2C1SCL_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SCL_PORT (GPIO_PORTA_BASE) +#define I2C1SCL_PIN (GPIO_PIN_6) + +#define I2C1SDA_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SDA_PORT (GPIO_PORTA_BASE) +#define I2C1SDA_PIN (GPIO_PIN_7) + +#define NMI_PERIPH (SYSCTL_PERIPH_GPIOB) +#define NMI_PORT (GPIO_PORTB_BASE) +#define NMI_PIN (GPIO_PIN_7) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOB) +#define U1RX_PORT (GPIO_PORTB_BASE) +#define U1RX_PIN (GPIO_PIN_0) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOB) +#define U1TX_PORT (GPIO_PORTB_BASE) +#define U1TX_PIN (GPIO_PIN_1) + +#define USB0EPEN_PERIPH (SYSCTL_PERIPH_GPIOC) +#define USB0EPEN_PORT (GPIO_PORTC_BASE) +#define USB0EPEN_PIN (GPIO_PIN_5) + +#define USB0PFLT_PERIPH (SYSCTL_PERIPH_GPIOC) +#define USB0PFLT_PORT (GPIO_PORTC_BASE) +#define USB0PFLT_PIN (GPIO_PIN_6) + +#endif // PART_LM3S5732 + +//***************************************************************************** +// +// LM3S5737 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S5737 + +#define ADC0_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC0_PORT (GPIO_PORTE_BASE) +#define ADC0_PIN (GPIO_PIN_7) + +#define ADC1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC1_PORT (GPIO_PORTE_BASE) +#define ADC1_PIN (GPIO_PIN_6) + +#define ADC2_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC2_PORT (GPIO_PORTE_BASE) +#define ADC2_PIN (GPIO_PIN_5) + +#define ADC3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC3_PORT (GPIO_PORTE_BASE) +#define ADC3_PIN (GPIO_PIN_4) + +#define ADC4_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC4_PORT (GPIO_PORTD_BASE) +#define ADC4_PIN (GPIO_PIN_7) + +#define ADC5_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC5_PORT (GPIO_PORTD_BASE) +#define ADC5_PIN (GPIO_PIN_6) + +#define ADC6_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC6_PORT (GPIO_PORTD_BASE) +#define ADC6_PIN (GPIO_PIN_5) + +#define ADC7_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC7_PORT (GPIO_PORTD_BASE) +#define ADC7_PIN (GPIO_PIN_4) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP1_PORT (GPIO_PORTB_BASE) +#define CCP1_PIN (GPIO_PIN_1) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_5) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define I2C1SCL_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SCL_PORT (GPIO_PORTA_BASE) +#define I2C1SCL_PIN (GPIO_PIN_6) + +#define I2C1SDA_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SDA_PORT (GPIO_PORTA_BASE) +#define I2C1SDA_PIN (GPIO_PIN_7) + +#define NMI_PERIPH (SYSCTL_PERIPH_GPIOB) +#define NMI_PORT (GPIO_PORTB_BASE) +#define NMI_PIN (GPIO_PIN_7) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define USB0EPEN_PERIPH (SYSCTL_PERIPH_GPIOC) +#define USB0EPEN_PORT (GPIO_PORTC_BASE) +#define USB0EPEN_PIN (GPIO_PIN_5) + +#define USB0PFLT_PERIPH (SYSCTL_PERIPH_GPIOC) +#define USB0PFLT_PORT (GPIO_PORTC_BASE) +#define USB0PFLT_PIN (GPIO_PIN_6) + +#endif // PART_LM3S5737 + +//***************************************************************************** +// +// LM3S5739 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S5739 + +#define ADC0_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC0_PORT (GPIO_PORTE_BASE) +#define ADC0_PIN (GPIO_PIN_7) + +#define ADC1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC1_PORT (GPIO_PORTE_BASE) +#define ADC1_PIN (GPIO_PIN_6) + +#define ADC2_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC2_PORT (GPIO_PORTE_BASE) +#define ADC2_PIN (GPIO_PIN_5) + +#define ADC3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC3_PORT (GPIO_PORTE_BASE) +#define ADC3_PIN (GPIO_PIN_4) + +#define ADC4_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC4_PORT (GPIO_PORTD_BASE) +#define ADC4_PIN (GPIO_PIN_7) + +#define ADC5_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC5_PORT (GPIO_PORTD_BASE) +#define ADC5_PIN (GPIO_PIN_6) + +#define ADC6_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC6_PORT (GPIO_PORTD_BASE) +#define ADC6_PIN (GPIO_PIN_5) + +#define ADC7_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC7_PORT (GPIO_PORTD_BASE) +#define ADC7_PIN (GPIO_PIN_4) + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C0O_PORT (GPIO_PORTF_BASE) +#define C0O_PIN (GPIO_PIN_4) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C1O_PORT (GPIO_PORTF_BASE) +#define C1O_PIN (GPIO_PIN_5) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CAN0RX_PORT (GPIO_PORTA_BASE) +#define CAN0RX_PIN (GPIO_PIN_6) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CAN0TX_PORT (GPIO_PORTA_BASE) +#define CAN0TX_PIN (GPIO_PIN_7) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP0_PORT (GPIO_PORTC_BASE) +#define CCP0_PIN (GPIO_PIN_6) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define CCP1_PORT (GPIO_PORTF_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP2_PORT (GPIO_PORTC_BASE) +#define CCP2_PIN (GPIO_PIN_4) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOG) +#define CCP3_PORT (GPIO_PORTG_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP5_PORT (GPIO_PORTD_BASE) +#define CCP5_PIN (GPIO_PIN_2) + +#define CCP6_PERIPH (SYSCTL_PERIPH_GPIOH) +#define CCP6_PORT (GPIO_PORTH_BASE) +#define CCP6_PIN (GPIO_PIN_0) + +#define CCP7_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP7_PORT (GPIO_PORTD_BASE) +#define CCP7_PIN (GPIO_PIN_3) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define I2C1SCL_PERIPH (SYSCTL_PERIPH_GPIOG) +#define I2C1SCL_PORT (GPIO_PORTG_BASE) +#define I2C1SCL_PIN (GPIO_PIN_0) + +#define I2C1SDA_PERIPH (SYSCTL_PERIPH_GPIOG) +#define I2C1SDA_PORT (GPIO_PORTG_BASE) +#define I2C1SDA_PIN (GPIO_PIN_1) + +#define NMI_PERIPH (SYSCTL_PERIPH_GPIOB) +#define NMI_PORT (GPIO_PORTB_BASE) +#define NMI_PIN (GPIO_PIN_7) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOB) +#define U1RX_PORT (GPIO_PORTB_BASE) +#define U1RX_PIN (GPIO_PIN_0) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOB) +#define U1TX_PORT (GPIO_PORTB_BASE) +#define U1TX_PIN (GPIO_PIN_1) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U2RX_PORT (GPIO_PORTD_BASE) +#define U2RX_PIN (GPIO_PIN_0) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U2TX_PORT (GPIO_PORTD_BASE) +#define U2TX_PIN (GPIO_PIN_1) + +#define USB0EPEN_PERIPH (SYSCTL_PERIPH_GPIOH) +#define USB0EPEN_PORT (GPIO_PORTH_BASE) +#define USB0EPEN_PIN (GPIO_PIN_3) + +#define USB0PFLT_PERIPH (SYSCTL_PERIPH_GPIOH) +#define USB0PFLT_PORT (GPIO_PORTH_BASE) +#define USB0PFLT_PIN (GPIO_PIN_4) + +#endif // PART_LM3S5739 + +//***************************************************************************** +// +// LM3S5747 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S5747 + +#define ADC0_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC0_PORT (GPIO_PORTE_BASE) +#define ADC0_PIN (GPIO_PIN_7) + +#define ADC1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC1_PORT (GPIO_PORTE_BASE) +#define ADC1_PIN (GPIO_PIN_6) + +#define ADC2_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC2_PORT (GPIO_PORTE_BASE) +#define ADC2_PIN (GPIO_PIN_5) + +#define ADC3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC3_PORT (GPIO_PORTE_BASE) +#define ADC3_PIN (GPIO_PIN_4) + +#define ADC4_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC4_PORT (GPIO_PORTD_BASE) +#define ADC4_PIN (GPIO_PIN_7) + +#define ADC5_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC5_PORT (GPIO_PORTD_BASE) +#define ADC5_PIN (GPIO_PIN_6) + +#define ADC6_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC6_PORT (GPIO_PORTD_BASE) +#define ADC6_PIN (GPIO_PIN_5) + +#define ADC7_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC7_PORT (GPIO_PORTD_BASE) +#define ADC7_PIN (GPIO_PIN_4) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CAN0RX_PORT (GPIO_PORTB_BASE) +#define CAN0RX_PIN (GPIO_PIN_4) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CAN0TX_PORT (GPIO_PORTB_BASE) +#define CAN0TX_PIN (GPIO_PIN_5) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define FAULT0_PERIPH (SYSCTL_PERIPH_GPIOE) +#define FAULT0_PORT (GPIO_PORTE_BASE) +#define FAULT0_PIN (GPIO_PIN_1) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define NMI_PERIPH (SYSCTL_PERIPH_GPIOB) +#define NMI_PORT (GPIO_PORTB_BASE) +#define NMI_PIN (GPIO_PIN_7) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM2_PORT (GPIO_PORTD_BASE) +#define PWM2_PIN (GPIO_PIN_2) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM3_PORT (GPIO_PORTD_BASE) +#define PWM3_PIN (GPIO_PIN_3) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM4_PORT (GPIO_PORTF_BASE) +#define PWM4_PIN (GPIO_PIN_2) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM5_PORT (GPIO_PORTF_BASE) +#define PWM5_PIN (GPIO_PIN_3) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define USB0EPEN_PERIPH (SYSCTL_PERIPH_GPIOC) +#define USB0EPEN_PORT (GPIO_PORTC_BASE) +#define USB0EPEN_PIN (GPIO_PIN_5) + +#define USB0PFLT_PERIPH (SYSCTL_PERIPH_GPIOC) +#define USB0PFLT_PORT (GPIO_PORTC_BASE) +#define USB0PFLT_PIN (GPIO_PIN_6) + +#endif // PART_LM3S5747 + +//***************************************************************************** +// +// LM3S5749 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S5749 + +#define ADC0_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC0_PORT (GPIO_PORTE_BASE) +#define ADC0_PIN (GPIO_PIN_7) + +#define ADC1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC1_PORT (GPIO_PORTE_BASE) +#define ADC1_PIN (GPIO_PIN_6) + +#define ADC2_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC2_PORT (GPIO_PORTE_BASE) +#define ADC2_PIN (GPIO_PIN_5) + +#define ADC3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC3_PORT (GPIO_PORTE_BASE) +#define ADC3_PIN (GPIO_PIN_4) + +#define ADC4_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC4_PORT (GPIO_PORTD_BASE) +#define ADC4_PIN (GPIO_PIN_7) + +#define ADC5_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC5_PORT (GPIO_PORTD_BASE) +#define ADC5_PIN (GPIO_PIN_6) + +#define ADC6_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC6_PORT (GPIO_PORTD_BASE) +#define ADC6_PIN (GPIO_PIN_5) + +#define ADC7_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC7_PORT (GPIO_PORTD_BASE) +#define ADC7_PIN (GPIO_PIN_4) + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C0O_PORT (GPIO_PORTF_BASE) +#define C0O_PIN (GPIO_PIN_4) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOF) +#define C1O_PORT (GPIO_PORTF_BASE) +#define C1O_PIN (GPIO_PIN_5) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CAN1RX_PERIPH (SYSCTL_PERIPH_GPIOF) +#define CAN1RX_PORT (GPIO_PORTF_BASE) +#define CAN1RX_PIN (GPIO_PIN_0) + +#define CAN1TX_PERIPH (SYSCTL_PERIPH_GPIOF) +#define CAN1TX_PORT (GPIO_PORTF_BASE) +#define CAN1TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP1_PORT (GPIO_PORTB_BASE) +#define CCP1_PIN (GPIO_PIN_1) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP2_PORT (GPIO_PORTC_BASE) +#define CCP2_PIN (GPIO_PIN_4) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define FAULT0_PERIPH (SYSCTL_PERIPH_GPIOG) +#define FAULT0_PORT (GPIO_PORTG_BASE) +#define FAULT0_PIN (GPIO_PIN_2) + +#define FAULT1_PERIPH (SYSCTL_PERIPH_GPIOG) +#define FAULT1_PORT (GPIO_PORTG_BASE) +#define FAULT1_PIN (GPIO_PIN_4) + +#define FAULT2_PERIPH (SYSCTL_PERIPH_GPIOG) +#define FAULT2_PORT (GPIO_PORTG_BASE) +#define FAULT2_PIN (GPIO_PIN_3) + +#define FAULT3_PERIPH (SYSCTL_PERIPH_GPIOH) +#define FAULT3_PORT (GPIO_PORTH_BASE) +#define FAULT3_PIN (GPIO_PIN_2) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define I2C1SCL_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SCL_PORT (GPIO_PORTA_BASE) +#define I2C1SCL_PIN (GPIO_PIN_6) + +#define I2C1SDA_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SDA_PORT (GPIO_PORTA_BASE) +#define I2C1SDA_PIN (GPIO_PIN_7) + +#define IDX0_PERIPH (SYSCTL_PERIPH_GPIOG) +#define IDX0_PORT (GPIO_PORTG_BASE) +#define IDX0_PIN (GPIO_PIN_5) + +#define NMI_PERIPH (SYSCTL_PERIPH_GPIOB) +#define NMI_PORT (GPIO_PORTB_BASE) +#define NMI_PIN (GPIO_PIN_7) + +#define PHA0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PHA0_PORT (GPIO_PORTF_BASE) +#define PHA0_PIN (GPIO_PIN_6) + +#define PHB0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PHB0_PORT (GPIO_PORTF_BASE) +#define PHB0_PIN (GPIO_PIN_7) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOG) +#define PWM0_PORT (GPIO_PORTG_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOG) +#define PWM1_PORT (GPIO_PORTG_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PWM2_PORT (GPIO_PORTH_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOH) +#define PWM3_PORT (GPIO_PORTH_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM4_PORT (GPIO_PORTF_BASE) +#define PWM4_PIN (GPIO_PIN_2) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM5_PORT (GPIO_PORTF_BASE) +#define PWM5_PIN (GPIO_PIN_3) + +#define PWM6_PERIPH (SYSCTL_PERIPH_GPIOG) +#define PWM6_PORT (GPIO_PORTG_BASE) +#define PWM6_PIN (GPIO_PIN_6) + +#define PWM7_PERIPH (SYSCTL_PERIPH_GPIOG) +#define PWM7_PORT (GPIO_PORTG_BASE) +#define PWM7_PIN (GPIO_PIN_7) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#define USB0EPEN_PERIPH (SYSCTL_PERIPH_GPIOH) +#define USB0EPEN_PORT (GPIO_PORTH_BASE) +#define USB0EPEN_PIN (GPIO_PIN_3) + +#define USB0PFLT_PERIPH (SYSCTL_PERIPH_GPIOH) +#define USB0PFLT_PORT (GPIO_PORTH_BASE) +#define USB0PFLT_PIN (GPIO_PIN_4) + +#endif // PART_LM3S5749 + +//***************************************************************************** +// +// LM3S5752 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S5752 + +#define ADC0_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC0_PORT (GPIO_PORTE_BASE) +#define ADC0_PIN (GPIO_PIN_3) + +#define ADC1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC1_PORT (GPIO_PORTE_BASE) +#define ADC1_PIN (GPIO_PIN_2) + +#define ADC2_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC2_PORT (GPIO_PORTE_BASE) +#define ADC2_PIN (GPIO_PIN_1) + +#define ADC3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC3_PORT (GPIO_PORTE_BASE) +#define ADC3_PIN (GPIO_PIN_0) + +#define ADC4_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC4_PORT (GPIO_PORTD_BASE) +#define ADC4_PIN (GPIO_PIN_3) + +#define ADC5_PERIPH (SYSCTL_PERIPH_GPIOD) +#define ADC5_PORT (GPIO_PORTD_BASE) +#define ADC5_PIN (GPIO_PIN_2) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_5) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP2_PORT (GPIO_PORTE_BASE) +#define CCP2_PIN (GPIO_PIN_4) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP3_PORT (GPIO_PORTA_BASE) +#define CCP3_PIN (GPIO_PIN_7) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define NMI_PERIPH (SYSCTL_PERIPH_GPIOB) +#define NMI_PORT (GPIO_PORTB_BASE) +#define NMI_PIN (GPIO_PIN_7) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define USB0EPEN_PERIPH (SYSCTL_PERIPH_GPIOC) +#define USB0EPEN_PORT (GPIO_PORTC_BASE) +#define USB0EPEN_PIN (GPIO_PIN_5) + +#define USB0ID_PERIPH (SYSCTL_PERIPH_GPIOB) +#define USB0ID_PORT (GPIO_PORTB_BASE) +#define USB0ID_PIN (GPIO_PIN_0) + +#define USB0PFLT_PERIPH (SYSCTL_PERIPH_GPIOC) +#define USB0PFLT_PORT (GPIO_PORTC_BASE) +#define USB0PFLT_PIN (GPIO_PIN_6) + +#define USB0VBUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define USB0VBUS_PORT (GPIO_PORTB_BASE) +#define USB0VBUS_PIN (GPIO_PIN_1) + +#endif // PART_LM3S5752 + +//***************************************************************************** +// +// LM3S5762 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S5762 + +#define ADC0_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC0_PORT (GPIO_PORTE_BASE) +#define ADC0_PIN (GPIO_PIN_3) + +#define ADC1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC1_PORT (GPIO_PORTE_BASE) +#define ADC1_PIN (GPIO_PIN_2) + +#define ADC2_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC2_PORT (GPIO_PORTE_BASE) +#define ADC2_PIN (GPIO_PIN_1) + +#define ADC3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define ADC3_PORT (GPIO_PORTE_BASE) +#define ADC3_PIN (GPIO_PIN_0) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CAN0RX_PORT (GPIO_PORTB_BASE) +#define CAN0RX_PIN (GPIO_PIN_4) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CAN0TX_PORT (GPIO_PORTB_BASE) +#define CAN0TX_PIN (GPIO_PIN_5) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_2) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP1_PORT (GPIO_PORTB_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP2_PORT (GPIO_PORTC_BASE) +#define CCP2_PIN (GPIO_PIN_4) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP3_PORT (GPIO_PORTE_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define FAULT0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define FAULT0_PORT (GPIO_PORTB_BASE) +#define FAULT0_PIN (GPIO_PIN_3) + +#define NMI_PERIPH (SYSCTL_PERIPH_GPIOB) +#define NMI_PORT (GPIO_PORTB_BASE) +#define NMI_PIN (GPIO_PIN_7) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM2_PORT (GPIO_PORTD_BASE) +#define PWM2_PIN (GPIO_PIN_2) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM3_PORT (GPIO_PORTD_BASE) +#define PWM3_PIN (GPIO_PIN_3) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOA) +#define PWM4_PORT (GPIO_PORTA_BASE) +#define PWM4_PIN (GPIO_PIN_6) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOA) +#define PWM5_PORT (GPIO_PORTA_BASE) +#define PWM5_PIN (GPIO_PIN_7) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define USB0EPEN_PERIPH (SYSCTL_PERIPH_GPIOC) +#define USB0EPEN_PORT (GPIO_PORTC_BASE) +#define USB0EPEN_PIN (GPIO_PIN_5) + +#define USB0ID_PERIPH (SYSCTL_PERIPH_GPIOB) +#define USB0ID_PORT (GPIO_PORTB_BASE) +#define USB0ID_PIN (GPIO_PIN_0) + +#define USB0PFLT_PERIPH (SYSCTL_PERIPH_GPIOC) +#define USB0PFLT_PORT (GPIO_PORTC_BASE) +#define USB0PFLT_PIN (GPIO_PIN_6) + +#define USB0VBUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define USB0VBUS_PORT (GPIO_PORTB_BASE) +#define USB0VBUS_PIN (GPIO_PIN_1) + +#endif // PART_LM3S5762 + +//***************************************************************************** +// +// LM3S6100 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S6100 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0O_PORT (GPIO_PORTB_BASE) +#define C0O_PIN (GPIO_PIN_5) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define LED0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED0_PORT (GPIO_PORTF_BASE) +#define LED0_PIN (GPIO_PIN_3) + +#define LED1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED1_PORT (GPIO_PORTF_BASE) +#define LED1_PIN (GPIO_PIN_2) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S6100 + +//***************************************************************************** +// +// LM3S6110 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S6110 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOD) +#define C0O_PORT (GPIO_PORTD_BASE) +#define C0O_PIN (GPIO_PIN_7) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_7) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP3_PORT (GPIO_PORTD_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOB) +#define FAULT_PORT (GPIO_PORTB_BASE) +#define FAULT_PIN (GPIO_PIN_3) + +#define LED0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED0_PORT (GPIO_PORTF_BASE) +#define LED0_PIN (GPIO_PIN_3) + +#define LED1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED1_PORT (GPIO_PORTF_BASE) +#define LED1_PIN (GPIO_PIN_2) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S6110 + +//***************************************************************************** +// +// LM3S6420 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S6420 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOD) +#define C0O_PORT (GPIO_PORTD_BASE) +#define C0O_PIN (GPIO_PIN_7) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOE) +#define C1O_PORT (GPIO_PORTE_BASE) +#define C1O_PIN (GPIO_PIN_6) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define LED0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED0_PORT (GPIO_PORTF_BASE) +#define LED0_PIN (GPIO_PIN_3) + +#define LED1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED1_PORT (GPIO_PORTF_BASE) +#define LED1_PIN (GPIO_PIN_2) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S6420 + +//***************************************************************************** +// +// LM3S6422 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S6422 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOD) +#define C0O_PORT (GPIO_PORTD_BASE) +#define C0O_PIN (GPIO_PIN_7) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1O_PORT (GPIO_PORTC_BASE) +#define C1O_PIN (GPIO_PIN_5) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define LED0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED0_PORT (GPIO_PORTF_BASE) +#define LED0_PIN (GPIO_PIN_3) + +#define LED1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED1_PORT (GPIO_PORTF_BASE) +#define LED1_PIN (GPIO_PIN_2) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S6422 + +//***************************************************************************** +// +// LM3S6432 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S6432 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOD) +#define C0O_PORT (GPIO_PORTD_BASE) +#define C0O_PIN (GPIO_PIN_7) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define LED0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED0_PORT (GPIO_PORTF_BASE) +#define LED0_PIN (GPIO_PIN_3) + +#define LED1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED1_PORT (GPIO_PORTF_BASE) +#define LED1_PIN (GPIO_PIN_2) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S6432 + +//***************************************************************************** +// +// LM3S6537 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S6537 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOD) +#define C0O_PORT (GPIO_PORTD_BASE) +#define C0O_PIN (GPIO_PIN_7) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP0_PORT (GPIO_PORTD_BASE) +#define CCP0_PIN (GPIO_PIN_4) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP2_PORT (GPIO_PORTD_BASE) +#define CCP2_PIN (GPIO_PIN_5) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP4_PORT (GPIO_PORTA_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define LED0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED0_PORT (GPIO_PORTF_BASE) +#define LED0_PIN (GPIO_PIN_3) + +#define LED1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED1_PORT (GPIO_PORTF_BASE) +#define LED1_PIN (GPIO_PIN_2) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM2_PORT (GPIO_PORTB_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM3_PORT (GPIO_PORTB_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM4_PORT (GPIO_PORTE_BASE) +#define PWM4_PIN (GPIO_PIN_0) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM5_PORT (GPIO_PORTE_BASE) +#define PWM5_PIN (GPIO_PIN_1) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S6537 + +//***************************************************************************** +// +// LM3S6610 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S6610 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C0O_PORT (GPIO_PORTC_BASE) +#define C0O_PIN (GPIO_PIN_5) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOE) +#define C1O_PORT (GPIO_PORTE_BASE) +#define C1O_PIN (GPIO_PIN_6) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define C2O_PERIPH (SYSCTL_PERIPH_GPIOE) +#define C2O_PORT (GPIO_PORTE_BASE) +#define C2O_PIN (GPIO_PIN_7) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_7) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP0_PORT (GPIO_PORTD_BASE) +#define CCP0_PIN (GPIO_PIN_4) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP2_PORT (GPIO_PORTD_BASE) +#define CCP2_PIN (GPIO_PIN_5) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP3_PORT (GPIO_PORTE_BASE) +#define CCP3_PIN (GPIO_PIN_0) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP4_PORT (GPIO_PORTA_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define IDX0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define IDX0_PORT (GPIO_PORTD_BASE) +#define IDX0_PIN (GPIO_PIN_7) + +#define LED0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED0_PORT (GPIO_PORTF_BASE) +#define LED0_PIN (GPIO_PIN_3) + +#define LED1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED1_PORT (GPIO_PORTF_BASE) +#define LED1_PIN (GPIO_PIN_2) + +#define PHA0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PHA0_PORT (GPIO_PORTD_BASE) +#define PHA0_PIN (GPIO_PIN_1) + +#define PHB0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PHB0_PORT (GPIO_PORTF_BASE) +#define PHB0_PIN (GPIO_PIN_0) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM1_PORT (GPIO_PORTF_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM2_PORT (GPIO_PORTB_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM3_PORT (GPIO_PORTB_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2RX_PORT (GPIO_PORTG_BASE) +#define U2RX_PIN (GPIO_PIN_0) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2TX_PORT (GPIO_PORTG_BASE) +#define U2TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S6610 + +//***************************************************************************** +// +// LM3S6611 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S6611 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C0O_PORT (GPIO_PORTC_BASE) +#define C0O_PIN (GPIO_PIN_5) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOE) +#define C1O_PORT (GPIO_PORTE_BASE) +#define C1O_PIN (GPIO_PIN_6) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP1_PORT (GPIO_PORTD_BASE) +#define CCP1_PIN (GPIO_PIN_7) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define I2C1SCL_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SCL_PORT (GPIO_PORTA_BASE) +#define I2C1SCL_PIN (GPIO_PIN_6) + +#define I2C1SDA_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SDA_PORT (GPIO_PORTA_BASE) +#define I2C1SDA_PIN (GPIO_PIN_7) + +#define LED0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED0_PORT (GPIO_PORTF_BASE) +#define LED0_PIN (GPIO_PIN_3) + +#define LED1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED1_PORT (GPIO_PORTF_BASE) +#define LED1_PIN (GPIO_PIN_2) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2RX_PORT (GPIO_PORTG_BASE) +#define U2RX_PIN (GPIO_PIN_0) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2TX_PORT (GPIO_PORTG_BASE) +#define U2TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S6611 + +//***************************************************************************** +// +// LM3S6618 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S6618 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C0O_PORT (GPIO_PORTC_BASE) +#define C0O_PIN (GPIO_PIN_5) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define I2C1SCL_PERIPH (SYSCTL_PERIPH_GPIOG) +#define I2C1SCL_PORT (GPIO_PORTG_BASE) +#define I2C1SCL_PIN (GPIO_PIN_0) + +#define I2C1SDA_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SDA_PORT (GPIO_PORTA_BASE) +#define I2C1SDA_PIN (GPIO_PIN_7) + +#define LED0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED0_PORT (GPIO_PORTF_BASE) +#define LED0_PIN (GPIO_PIN_3) + +#define LED1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED1_PORT (GPIO_PORTF_BASE) +#define LED1_PIN (GPIO_PIN_2) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S6618 + +//***************************************************************************** +// +// LM3S6633 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S6633 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C0O_PORT (GPIO_PORTC_BASE) +#define C0O_PIN (GPIO_PIN_5) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP4_PORT (GPIO_PORTA_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP5_PORT (GPIO_PORTB_BASE) +#define CCP5_PIN (GPIO_PIN_5) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define LED0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED0_PORT (GPIO_PORTF_BASE) +#define LED0_PIN (GPIO_PIN_3) + +#define LED1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED1_PORT (GPIO_PORTF_BASE) +#define LED1_PIN (GPIO_PIN_2) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S6633 + +//***************************************************************************** +// +// LM3S6637 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S6637 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOD) +#define C0O_PORT (GPIO_PORTD_BASE) +#define C0O_PIN (GPIO_PIN_7) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1O_PORT (GPIO_PORTC_BASE) +#define C1O_PIN (GPIO_PIN_5) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define C2O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2O_PORT (GPIO_PORTC_BASE) +#define C2O_PIN (GPIO_PIN_6) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_7) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP3_PORT (GPIO_PORTD_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP4_PORT (GPIO_PORTA_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define LED0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED0_PORT (GPIO_PORTF_BASE) +#define LED0_PIN (GPIO_PIN_3) + +#define LED1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED1_PORT (GPIO_PORTF_BASE) +#define LED1_PIN (GPIO_PIN_2) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S6637 + +//***************************************************************************** +// +// LM3S6730 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S6730 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOD) +#define C0O_PORT (GPIO_PORTD_BASE) +#define C0O_PIN (GPIO_PIN_7) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOE) +#define C1O_PORT (GPIO_PORTE_BASE) +#define C1O_PIN (GPIO_PIN_6) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define LED0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED0_PORT (GPIO_PORTF_BASE) +#define LED0_PIN (GPIO_PIN_3) + +#define LED1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED1_PORT (GPIO_PORTF_BASE) +#define LED1_PIN (GPIO_PIN_2) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S6730 + +//***************************************************************************** +// +// LM3S6753 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S6753 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOD) +#define C0O_PORT (GPIO_PORTD_BASE) +#define C0O_PIN (GPIO_PIN_7) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP0_PORT (GPIO_PORTD_BASE) +#define CCP0_PIN (GPIO_PIN_4) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP2_PORT (GPIO_PORTD_BASE) +#define CCP2_PIN (GPIO_PIN_5) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define IDX0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define IDX0_PORT (GPIO_PORTD_BASE) +#define IDX0_PIN (GPIO_PIN_0) + +#define LED0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED0_PORT (GPIO_PORTF_BASE) +#define LED0_PIN (GPIO_PIN_3) + +#define LED1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED1_PORT (GPIO_PORTF_BASE) +#define LED1_PIN (GPIO_PIN_2) + +#define PHA0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHA0_PORT (GPIO_PORTC_BASE) +#define PHA0_PIN (GPIO_PIN_4) + +#define PHB0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHB0_PORT (GPIO_PORTC_BASE) +#define PHB0_PIN (GPIO_PIN_7) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM0_PORT (GPIO_PORTF_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM2_PORT (GPIO_PORTB_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM3_PORT (GPIO_PORTB_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM4_PORT (GPIO_PORTE_BASE) +#define PWM4_PIN (GPIO_PIN_0) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM5_PORT (GPIO_PORTE_BASE) +#define PWM5_PIN (GPIO_PIN_1) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S6753 + +//***************************************************************************** +// +// LM3S6816 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S6816 + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP4_PORT (GPIO_PORTA_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP5_PORT (GPIO_PORTB_BASE) +#define CCP5_PIN (GPIO_PIN_5) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOE) +#define FAULT_PORT (GPIO_PORTE_BASE) +#define FAULT_PIN (GPIO_PIN_1) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define LED0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED0_PORT (GPIO_PORTF_BASE) +#define LED0_PIN (GPIO_PIN_3) + +#define LED1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED1_PORT (GPIO_PORTF_BASE) +#define LED1_PIN (GPIO_PIN_2) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2RX_PORT (GPIO_PORTG_BASE) +#define U2RX_PIN (GPIO_PIN_0) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2TX_PORT (GPIO_PORTG_BASE) +#define U2TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S6816 + +//***************************************************************************** +// +// LM3S6911 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S6911 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C0O_PORT (GPIO_PORTC_BASE) +#define C0O_PIN (GPIO_PIN_5) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOE) +#define C1O_PORT (GPIO_PORTE_BASE) +#define C1O_PIN (GPIO_PIN_6) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP1_PORT (GPIO_PORTD_BASE) +#define CCP1_PIN (GPIO_PIN_7) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define I2C1SCL_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SCL_PORT (GPIO_PORTA_BASE) +#define I2C1SCL_PIN (GPIO_PIN_6) + +#define I2C1SDA_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SDA_PORT (GPIO_PORTA_BASE) +#define I2C1SDA_PIN (GPIO_PIN_7) + +#define LED0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED0_PORT (GPIO_PORTF_BASE) +#define LED0_PIN (GPIO_PIN_3) + +#define LED1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED1_PORT (GPIO_PORTF_BASE) +#define LED1_PIN (GPIO_PIN_2) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2RX_PORT (GPIO_PORTG_BASE) +#define U2RX_PIN (GPIO_PIN_0) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2TX_PORT (GPIO_PORTG_BASE) +#define U2TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S6911 + +//***************************************************************************** +// +// LM3S6916 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S6916 + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP4_PORT (GPIO_PORTA_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP5_PORT (GPIO_PORTB_BASE) +#define CCP5_PIN (GPIO_PIN_5) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOE) +#define FAULT_PORT (GPIO_PORTE_BASE) +#define FAULT_PIN (GPIO_PIN_1) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define LED0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED0_PORT (GPIO_PORTF_BASE) +#define LED0_PIN (GPIO_PIN_3) + +#define LED1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED1_PORT (GPIO_PORTF_BASE) +#define LED1_PIN (GPIO_PIN_2) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2RX_PORT (GPIO_PORTG_BASE) +#define U2RX_PIN (GPIO_PIN_0) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2TX_PORT (GPIO_PORTG_BASE) +#define U2TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S6916 + +//***************************************************************************** +// +// LM3S6918 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S6918 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C0O_PORT (GPIO_PORTC_BASE) +#define C0O_PIN (GPIO_PIN_5) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP4_PORT (GPIO_PORTC_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define I2C1SCL_PERIPH (SYSCTL_PERIPH_GPIOG) +#define I2C1SCL_PORT (GPIO_PORTG_BASE) +#define I2C1SCL_PIN (GPIO_PIN_0) + +#define I2C1SDA_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SDA_PORT (GPIO_PORTA_BASE) +#define I2C1SDA_PIN (GPIO_PIN_7) + +#define LED0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED0_PORT (GPIO_PORTF_BASE) +#define LED0_PIN (GPIO_PIN_3) + +#define LED1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED1_PORT (GPIO_PORTF_BASE) +#define LED1_PIN (GPIO_PIN_2) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S6918 + +//***************************************************************************** +// +// LM3S6938 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S6938 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0O_PORT (GPIO_PORTB_BASE) +#define C0O_PIN (GPIO_PIN_6) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1O_PORT (GPIO_PORTC_BASE) +#define C1O_PIN (GPIO_PIN_5) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_7) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP3_PORT (GPIO_PORTE_BASE) +#define CCP3_PIN (GPIO_PIN_0) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP4_PORT (GPIO_PORTA_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define LED0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED0_PORT (GPIO_PORTF_BASE) +#define LED0_PIN (GPIO_PIN_3) + +#define LED1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED1_PORT (GPIO_PORTF_BASE) +#define LED1_PIN (GPIO_PIN_2) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2RX_PORT (GPIO_PORTG_BASE) +#define U2RX_PIN (GPIO_PIN_0) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2TX_PORT (GPIO_PORTG_BASE) +#define U2TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S6938 + +//***************************************************************************** +// +// LM3S6950 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S6950 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0O_PORT (GPIO_PORTB_BASE) +#define C0O_PIN (GPIO_PIN_6) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1O_PORT (GPIO_PORTC_BASE) +#define C1O_PIN (GPIO_PIN_5) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define C2O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2O_PORT (GPIO_PORTC_BASE) +#define C2O_PIN (GPIO_PIN_6) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_7) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP0_PORT (GPIO_PORTD_BASE) +#define CCP0_PIN (GPIO_PIN_4) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP2_PORT (GPIO_PORTD_BASE) +#define CCP2_PIN (GPIO_PIN_5) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP3_PORT (GPIO_PORTE_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP4_PORT (GPIO_PORTA_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define IDX0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define IDX0_PORT (GPIO_PORTD_BASE) +#define IDX0_PIN (GPIO_PIN_7) + +#define LED0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED0_PORT (GPIO_PORTF_BASE) +#define LED0_PIN (GPIO_PIN_3) + +#define LED1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED1_PORT (GPIO_PORTF_BASE) +#define LED1_PIN (GPIO_PIN_2) + +#define PHA0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PHA0_PORT (GPIO_PORTD_BASE) +#define PHA0_PIN (GPIO_PIN_1) + +#define PHB0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PHB0_PORT (GPIO_PORTF_BASE) +#define PHB0_PIN (GPIO_PIN_0) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM1_PORT (GPIO_PORTF_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM2_PORT (GPIO_PORTB_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM3_PORT (GPIO_PORTB_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM4_PORT (GPIO_PORTE_BASE) +#define PWM4_PIN (GPIO_PIN_6) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM5_PORT (GPIO_PORTE_BASE) +#define PWM5_PIN (GPIO_PIN_7) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2RX_PORT (GPIO_PORTG_BASE) +#define U2RX_PIN (GPIO_PIN_0) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2TX_PORT (GPIO_PORTG_BASE) +#define U2TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S6950 + +//***************************************************************************** +// +// LM3S6952 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S6952 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0O_PORT (GPIO_PORTB_BASE) +#define C0O_PIN (GPIO_PIN_6) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1O_PORT (GPIO_PORTC_BASE) +#define C1O_PIN (GPIO_PIN_5) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_7) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP0_PORT (GPIO_PORTD_BASE) +#define CCP0_PIN (GPIO_PIN_4) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP2_PORT (GPIO_PORTD_BASE) +#define CCP2_PIN (GPIO_PIN_5) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP3_PORT (GPIO_PORTE_BASE) +#define CCP3_PIN (GPIO_PIN_0) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define IDX0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define IDX0_PORT (GPIO_PORTD_BASE) +#define IDX0_PIN (GPIO_PIN_7) + +#define LED0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED0_PORT (GPIO_PORTF_BASE) +#define LED0_PIN (GPIO_PIN_3) + +#define LED1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED1_PORT (GPIO_PORTF_BASE) +#define LED1_PIN (GPIO_PIN_2) + +#define PHA0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHA0_PORT (GPIO_PORTC_BASE) +#define PHA0_PIN (GPIO_PIN_4) + +#define PHB0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PHB0_PORT (GPIO_PORTF_BASE) +#define PHB0_PIN (GPIO_PIN_0) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM0_PORT (GPIO_PORTD_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM2_PORT (GPIO_PORTB_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM3_PORT (GPIO_PORTB_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2RX_PORT (GPIO_PORTG_BASE) +#define U2RX_PIN (GPIO_PIN_0) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2TX_PORT (GPIO_PORTG_BASE) +#define U2TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S6952 + +//***************************************************************************** +// +// LM3S6965 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S6965 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C0O_PORT (GPIO_PORTC_BASE) +#define C0O_PIN (GPIO_PIN_5) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP0_PORT (GPIO_PORTD_BASE) +#define CCP0_PIN (GPIO_PIN_4) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP1_PORT (GPIO_PORTD_BASE) +#define CCP1_PIN (GPIO_PIN_7) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP2_PORT (GPIO_PORTD_BASE) +#define CCP2_PIN (GPIO_PIN_5) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define I2C1SCL_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SCL_PORT (GPIO_PORTA_BASE) +#define I2C1SCL_PIN (GPIO_PIN_6) + +#define I2C1SDA_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SDA_PORT (GPIO_PORTA_BASE) +#define I2C1SDA_PIN (GPIO_PIN_7) + +#define IDX0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define IDX0_PORT (GPIO_PORTD_BASE) +#define IDX0_PIN (GPIO_PIN_0) + +#define IDX1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define IDX1_PORT (GPIO_PORTF_BASE) +#define IDX1_PIN (GPIO_PIN_1) + +#define LED0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED0_PORT (GPIO_PORTF_BASE) +#define LED0_PIN (GPIO_PIN_3) + +#define LED1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED1_PORT (GPIO_PORTF_BASE) +#define LED1_PIN (GPIO_PIN_2) + +#define PHA0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHA0_PORT (GPIO_PORTC_BASE) +#define PHA0_PIN (GPIO_PIN_4) + +#define PHA1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PHA1_PORT (GPIO_PORTE_BASE) +#define PHA1_PIN (GPIO_PIN_3) + +#define PHB0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHB0_PORT (GPIO_PORTC_BASE) +#define PHB0_PIN (GPIO_PIN_7) + +#define PHB1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PHB1_PORT (GPIO_PORTE_BASE) +#define PHB1_PIN (GPIO_PIN_2) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM0_PORT (GPIO_PORTF_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM1_PORT (GPIO_PORTD_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM2_PORT (GPIO_PORTB_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM3_PORT (GPIO_PORTB_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM4_PORT (GPIO_PORTE_BASE) +#define PWM4_PIN (GPIO_PIN_0) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM5_PORT (GPIO_PORTE_BASE) +#define PWM5_PIN (GPIO_PIN_1) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2RX_PORT (GPIO_PORTG_BASE) +#define U2RX_PIN (GPIO_PIN_0) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2TX_PORT (GPIO_PORTG_BASE) +#define U2TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S6965 + +//***************************************************************************** +// +// LM3S8530 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S8530 + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CAN1RX_PERIPH (SYSCTL_PERIPH_GPIOF) +#define CAN1RX_PORT (GPIO_PORTF_BASE) +#define CAN1RX_PIN (GPIO_PIN_0) + +#define CAN1TX_PERIPH (SYSCTL_PERIPH_GPIOF) +#define CAN1TX_PORT (GPIO_PORTF_BASE) +#define CAN1TX_PIN (GPIO_PIN_1) + +#define CAN2RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CAN2RX_PORT (GPIO_PORTE_BASE) +#define CAN2RX_PIN (GPIO_PIN_4) + +#define CAN2TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CAN2TX_PORT (GPIO_PORTE_BASE) +#define CAN2TX_PIN (GPIO_PIN_5) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define LED0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED0_PORT (GPIO_PORTF_BASE) +#define LED0_PIN (GPIO_PIN_3) + +#define LED1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED1_PORT (GPIO_PORTF_BASE) +#define LED1_PIN (GPIO_PIN_2) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S8530 + +//***************************************************************************** +// +// LM3S8538 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S8538 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0O_PORT (GPIO_PORTB_BASE) +#define C0O_PIN (GPIO_PIN_6) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1O_PORT (GPIO_PORTC_BASE) +#define C1O_PIN (GPIO_PIN_5) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_7) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP3_PORT (GPIO_PORTE_BASE) +#define CCP3_PIN (GPIO_PIN_0) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define LED0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED0_PORT (GPIO_PORTF_BASE) +#define LED0_PIN (GPIO_PIN_3) + +#define LED1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED1_PORT (GPIO_PORTF_BASE) +#define LED1_PIN (GPIO_PIN_2) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S8538 + +//***************************************************************************** +// +// LM3S8630 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S8630 + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define LED0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED0_PORT (GPIO_PORTF_BASE) +#define LED0_PIN (GPIO_PIN_3) + +#define LED1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED1_PORT (GPIO_PORTF_BASE) +#define LED1_PIN (GPIO_PIN_2) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S8630 + +//***************************************************************************** +// +// LM3S8730 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S8730 + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define LED0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED0_PORT (GPIO_PORTF_BASE) +#define LED0_PIN (GPIO_PIN_3) + +#define LED1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED1_PORT (GPIO_PORTF_BASE) +#define LED1_PIN (GPIO_PIN_2) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S8730 + +//***************************************************************************** +// +// LM3S8733 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S8733 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOD) +#define C0O_PORT (GPIO_PORTD_BASE) +#define C0O_PIN (GPIO_PIN_7) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1O_PORT (GPIO_PORTC_BASE) +#define C1O_PIN (GPIO_PIN_5) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_7) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP3_PORT (GPIO_PORTD_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define LED0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED0_PORT (GPIO_PORTF_BASE) +#define LED0_PIN (GPIO_PIN_3) + +#define LED1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED1_PORT (GPIO_PORTF_BASE) +#define LED1_PIN (GPIO_PIN_2) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S8733 + +//***************************************************************************** +// +// LM3S8738 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S8738 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C0O_PORT (GPIO_PORTC_BASE) +#define C0O_PIN (GPIO_PIN_5) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP4_PORT (GPIO_PORTA_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP5_PORT (GPIO_PORTB_BASE) +#define CCP5_PIN (GPIO_PIN_5) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define LED0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED0_PORT (GPIO_PORTF_BASE) +#define LED0_PIN (GPIO_PIN_3) + +#define LED1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED1_PORT (GPIO_PORTF_BASE) +#define LED1_PIN (GPIO_PIN_2) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2RX_PORT (GPIO_PORTG_BASE) +#define U2RX_PIN (GPIO_PIN_0) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2TX_PORT (GPIO_PORTG_BASE) +#define U2TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S8738 + +//***************************************************************************** +// +// LM3S8930 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S8930 + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CAN1RX_PERIPH (SYSCTL_PERIPH_GPIOF) +#define CAN1RX_PORT (GPIO_PORTF_BASE) +#define CAN1RX_PIN (GPIO_PIN_0) + +#define CAN1TX_PERIPH (SYSCTL_PERIPH_GPIOF) +#define CAN1TX_PORT (GPIO_PORTF_BASE) +#define CAN1TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define LED0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED0_PORT (GPIO_PORTF_BASE) +#define LED0_PIN (GPIO_PIN_3) + +#define LED1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED1_PORT (GPIO_PORTF_BASE) +#define LED1_PIN (GPIO_PIN_2) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S8930 + +//***************************************************************************** +// +// LM3S8933 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S8933 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOD) +#define C0O_PORT (GPIO_PORTD_BASE) +#define C0O_PIN (GPIO_PIN_7) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1O_PORT (GPIO_PORTC_BASE) +#define C1O_PIN (GPIO_PIN_5) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_7) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP3_PORT (GPIO_PORTD_BASE) +#define CCP3_PIN (GPIO_PIN_4) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define LED0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED0_PORT (GPIO_PORTF_BASE) +#define LED0_PIN (GPIO_PIN_3) + +#define LED1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED1_PORT (GPIO_PORTF_BASE) +#define LED1_PIN (GPIO_PIN_2) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S8933 + +//***************************************************************************** +// +// LM3S8938 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S8938 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0O_PORT (GPIO_PORTB_BASE) +#define C0O_PIN (GPIO_PIN_6) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define C1O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1O_PORT (GPIO_PORTC_BASE) +#define C1O_PIN (GPIO_PIN_5) + +#define C1_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C1_MINUS_PORT (GPIO_PORTB_BASE) +#define C1_MINUS_PIN (GPIO_PIN_5) + +#define C1_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C1_PLUS_PORT (GPIO_PORTC_BASE) +#define C1_PLUS_PIN (GPIO_PIN_5) + +#define C2O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2O_PORT (GPIO_PORTC_BASE) +#define C2O_PIN (GPIO_PIN_6) + +#define C2_MINUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_MINUS_PORT (GPIO_PORTC_BASE) +#define C2_MINUS_PIN (GPIO_PIN_7) + +#define C2_PLUS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C2_PLUS_PORT (GPIO_PORTC_BASE) +#define C2_PLUS_PIN (GPIO_PIN_6) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP1_PORT (GPIO_PORTE_BASE) +#define CCP1_PIN (GPIO_PIN_3) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP3_PORT (GPIO_PORTE_BASE) +#define CCP3_PIN (GPIO_PIN_0) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CCP4_PORT (GPIO_PORTE_BASE) +#define CCP4_PIN (GPIO_PIN_2) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP5_PORT (GPIO_PORTC_BASE) +#define CCP5_PIN (GPIO_PIN_4) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define I2C1SCL_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SCL_PORT (GPIO_PORTA_BASE) +#define I2C1SCL_PIN (GPIO_PIN_6) + +#define I2C1SDA_PERIPH (SYSCTL_PERIPH_GPIOA) +#define I2C1SDA_PORT (GPIO_PORTA_BASE) +#define I2C1SDA_PIN (GPIO_PIN_7) + +#define LED0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED0_PORT (GPIO_PORTF_BASE) +#define LED0_PIN (GPIO_PIN_3) + +#define LED1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED1_PORT (GPIO_PORTF_BASE) +#define LED1_PIN (GPIO_PIN_2) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#define U2RX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2RX_PORT (GPIO_PORTG_BASE) +#define U2RX_PIN (GPIO_PIN_0) + +#define U2TX_PERIPH (SYSCTL_PERIPH_GPIOG) +#define U2TX_PORT (GPIO_PORTG_BASE) +#define U2TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S8938 + +//***************************************************************************** +// +// LM3S8962 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S8962 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0O_PORT (GPIO_PORTB_BASE) +#define C0O_PIN (GPIO_PIN_5) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CCP0_PORT (GPIO_PORTD_BASE) +#define CCP0_PIN (GPIO_PIN_4) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOD) +#define FAULT_PORT (GPIO_PORTD_BASE) +#define FAULT_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define IDX0_PERIPH (SYSCTL_PERIPH_GPIOD) +#define IDX0_PORT (GPIO_PORTD_BASE) +#define IDX0_PIN (GPIO_PIN_7) + +#define IDX1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define IDX1_PORT (GPIO_PORTF_BASE) +#define IDX1_PIN (GPIO_PIN_1) + +#define LED0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED0_PORT (GPIO_PORTF_BASE) +#define LED0_PIN (GPIO_PIN_3) + +#define LED1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED1_PORT (GPIO_PORTF_BASE) +#define LED1_PIN (GPIO_PIN_2) + +#define PHA0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHA0_PORT (GPIO_PORTC_BASE) +#define PHA0_PIN (GPIO_PIN_4) + +#define PHA1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PHA1_PORT (GPIO_PORTE_BASE) +#define PHA1_PIN (GPIO_PIN_3) + +#define PHB0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHB0_PORT (GPIO_PORTC_BASE) +#define PHB0_PIN (GPIO_PIN_6) + +#define PHB1_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PHB1_PORT (GPIO_PORTE_BASE) +#define PHB1_PIN (GPIO_PIN_2) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM0_PORT (GPIO_PORTF_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOG) +#define PWM1_PORT (GPIO_PORTG_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM2_PORT (GPIO_PORTB_BASE) +#define PWM2_PIN (GPIO_PIN_0) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOB) +#define PWM3_PORT (GPIO_PORTB_BASE) +#define PWM3_PIN (GPIO_PIN_1) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM4_PORT (GPIO_PORTE_BASE) +#define PWM4_PIN (GPIO_PIN_0) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM5_PORT (GPIO_PORTE_BASE) +#define PWM5_PIN (GPIO_PIN_1) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S8962 + +//***************************************************************************** +// +// LM3S8970 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S8970 + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CAN1RX_PERIPH (SYSCTL_PERIPH_GPIOF) +#define CAN1RX_PORT (GPIO_PORTF_BASE) +#define CAN1RX_PIN (GPIO_PIN_0) + +#define CAN1TX_PERIPH (SYSCTL_PERIPH_GPIOF) +#define CAN1TX_PORT (GPIO_PORTF_BASE) +#define CAN1TX_PIN (GPIO_PIN_1) + +#define CAN2RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CAN2RX_PORT (GPIO_PORTE_BASE) +#define CAN2RX_PIN (GPIO_PIN_4) + +#define CAN2TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define CAN2TX_PORT (GPIO_PORTE_BASE) +#define CAN2TX_PIN (GPIO_PIN_5) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define I2C0SCL_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SCL_PORT (GPIO_PORTB_BASE) +#define I2C0SCL_PIN (GPIO_PIN_2) + +#define I2C0SDA_PERIPH (SYSCTL_PERIPH_GPIOB) +#define I2C0SDA_PORT (GPIO_PORTB_BASE) +#define I2C0SDA_PIN (GPIO_PIN_3) + +#define LED0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED0_PORT (GPIO_PORTF_BASE) +#define LED0_PIN (GPIO_PIN_3) + +#define LED1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED1_PORT (GPIO_PORTF_BASE) +#define LED1_PIN (GPIO_PIN_2) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SSI1CLK_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1CLK_PORT (GPIO_PORTE_BASE) +#define SSI1CLK_PIN (GPIO_PIN_0) + +#define SSI1FSS_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1FSS_PORT (GPIO_PORTE_BASE) +#define SSI1FSS_PIN (GPIO_PIN_1) + +#define SSI1RX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1RX_PORT (GPIO_PORTE_BASE) +#define SSI1RX_PIN (GPIO_PIN_2) + +#define SSI1TX_PERIPH (SYSCTL_PERIPH_GPIOE) +#define SSI1TX_PORT (GPIO_PORTE_BASE) +#define SSI1TX_PIN (GPIO_PIN_3) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#define U1RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1RX_PORT (GPIO_PORTD_BASE) +#define U1RX_PIN (GPIO_PIN_2) + +#define U1TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define U1TX_PORT (GPIO_PORTD_BASE) +#define U1TX_PIN (GPIO_PIN_3) + +#endif // PART_LM3S8970 + +//***************************************************************************** +// +// LM3S8971 Port/Pin Mapping Definitions +// +//***************************************************************************** +#ifdef PART_LM3S8971 + +#define C0O_PERIPH (SYSCTL_PERIPH_GPIOC) +#define C0O_PORT (GPIO_PORTC_BASE) +#define C0O_PIN (GPIO_PIN_5) + +#define C0_MINUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_MINUS_PORT (GPIO_PORTB_BASE) +#define C0_MINUS_PIN (GPIO_PIN_4) + +#define C0_PLUS_PERIPH (SYSCTL_PERIPH_GPIOB) +#define C0_PLUS_PORT (GPIO_PORTB_BASE) +#define C0_PLUS_PIN (GPIO_PIN_6) + +#define CAN0RX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0RX_PORT (GPIO_PORTD_BASE) +#define CAN0RX_PIN (GPIO_PIN_0) + +#define CAN0TX_PERIPH (SYSCTL_PERIPH_GPIOD) +#define CAN0TX_PORT (GPIO_PORTD_BASE) +#define CAN0TX_PIN (GPIO_PIN_1) + +#define CCP0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP0_PORT (GPIO_PORTB_BASE) +#define CCP0_PIN (GPIO_PIN_0) + +#define CCP1_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP1_PORT (GPIO_PORTA_BASE) +#define CCP1_PIN (GPIO_PIN_6) + +#define CCP2_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP2_PORT (GPIO_PORTB_BASE) +#define CCP2_PIN (GPIO_PIN_1) + +#define CCP3_PERIPH (SYSCTL_PERIPH_GPIOC) +#define CCP3_PORT (GPIO_PORTC_BASE) +#define CCP3_PIN (GPIO_PIN_6) + +#define CCP4_PERIPH (SYSCTL_PERIPH_GPIOA) +#define CCP4_PORT (GPIO_PORTA_BASE) +#define CCP4_PIN (GPIO_PIN_7) + +#define CCP5_PERIPH (SYSCTL_PERIPH_GPIOB) +#define CCP5_PORT (GPIO_PORTB_BASE) +#define CCP5_PIN (GPIO_PIN_5) + +#define FAULT_PERIPH (SYSCTL_PERIPH_GPIOB) +#define FAULT_PORT (GPIO_PORTB_BASE) +#define FAULT_PIN (GPIO_PIN_3) + +#define IDX0_PERIPH (SYSCTL_PERIPH_GPIOB) +#define IDX0_PORT (GPIO_PORTB_BASE) +#define IDX0_PIN (GPIO_PIN_2) + +#define LED0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED0_PORT (GPIO_PORTF_BASE) +#define LED0_PIN (GPIO_PIN_3) + +#define LED1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define LED1_PORT (GPIO_PORTF_BASE) +#define LED1_PIN (GPIO_PIN_2) + +#define PHA0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHA0_PORT (GPIO_PORTC_BASE) +#define PHA0_PIN (GPIO_PIN_4) + +#define PHB0_PERIPH (SYSCTL_PERIPH_GPIOC) +#define PHB0_PORT (GPIO_PORTC_BASE) +#define PHB0_PIN (GPIO_PIN_7) + +#define PWM0_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM0_PORT (GPIO_PORTF_BASE) +#define PWM0_PIN (GPIO_PIN_0) + +#define PWM1_PERIPH (SYSCTL_PERIPH_GPIOF) +#define PWM1_PORT (GPIO_PORTF_BASE) +#define PWM1_PIN (GPIO_PIN_1) + +#define PWM2_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM2_PORT (GPIO_PORTD_BASE) +#define PWM2_PIN (GPIO_PIN_2) + +#define PWM3_PERIPH (SYSCTL_PERIPH_GPIOD) +#define PWM3_PORT (GPIO_PORTD_BASE) +#define PWM3_PIN (GPIO_PIN_3) + +#define PWM4_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM4_PORT (GPIO_PORTE_BASE) +#define PWM4_PIN (GPIO_PIN_0) + +#define PWM5_PERIPH (SYSCTL_PERIPH_GPIOE) +#define PWM5_PORT (GPIO_PORTE_BASE) +#define PWM5_PIN (GPIO_PIN_1) + +#define SSI0CLK_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0CLK_PORT (GPIO_PORTA_BASE) +#define SSI0CLK_PIN (GPIO_PIN_2) + +#define SSI0FSS_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0FSS_PORT (GPIO_PORTA_BASE) +#define SSI0FSS_PIN (GPIO_PIN_3) + +#define SSI0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0RX_PORT (GPIO_PORTA_BASE) +#define SSI0RX_PIN (GPIO_PIN_4) + +#define SSI0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define SSI0TX_PORT (GPIO_PORTA_BASE) +#define SSI0TX_PIN (GPIO_PIN_5) + +#define SWCLK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWCLK_PORT (GPIO_PORTC_BASE) +#define SWCLK_PIN (GPIO_PIN_0) + +#define SWDIO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWDIO_PORT (GPIO_PORTC_BASE) +#define SWDIO_PIN (GPIO_PIN_1) + +#define SWO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define SWO_PORT (GPIO_PORTC_BASE) +#define SWO_PIN (GPIO_PIN_3) + +#define TCK_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TCK_PORT (GPIO_PORTC_BASE) +#define TCK_PIN (GPIO_PIN_0) + +#define TDI_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDI_PORT (GPIO_PORTC_BASE) +#define TDI_PIN (GPIO_PIN_2) + +#define TDO_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TDO_PORT (GPIO_PORTC_BASE) +#define TDO_PIN (GPIO_PIN_3) + +#define TMS_PERIPH (SYSCTL_PERIPH_GPIOC) +#define TMS_PORT (GPIO_PORTC_BASE) +#define TMS_PIN (GPIO_PIN_1) + +#define TRST_PERIPH (SYSCTL_PERIPH_GPIOB) +#define TRST_PORT (GPIO_PORTB_BASE) +#define TRST_PIN (GPIO_PIN_7) + +#define U0RX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0RX_PORT (GPIO_PORTA_BASE) +#define U0RX_PIN (GPIO_PIN_0) + +#define U0TX_PERIPH (SYSCTL_PERIPH_GPIOA) +#define U0TX_PORT (GPIO_PORTA_BASE) +#define U0TX_PIN (GPIO_PIN_1) + +#endif // PART_LM3S8971 + +//***************************************************************************** +// +// Pin Mapping Functions +// +// This section describes the code that is responsible for handling the +// mapping of peripheral functions to their physical location on the pins of +// a device. +// +//***************************************************************************** + +//***************************************************************************** +// +// Definitions to support mapping GPIO Ports and Pins to their function. +// +//***************************************************************************** + +//***************************************************************************** +// +// Configures the specified ADC pin to function as an ADC pin. +// +// \param ulName is one of the valid names for the ADC pins. +// +// This function takes on of the valid names for an ADC pin and configures +// the pin for its ADC functionality depending on the part that is defined. +// +// The valid names for the pins are as follows: \b ADC0, \b ADC1, \b ADC2, +// \b ADC3, \b ADC4, \b ADC5, \b ADC6, or \b ADC7. +// +// \sa GPIOPinTypeADC() in order to configure multiple ADC pins at once. +// +// \return None. +// +//***************************************************************************** +#define PinTypeADC(ulName) GPIOPinTypeADC(ulName##_PORT, ulName##_PIN) + +//***************************************************************************** +// +// Configures the specified CAN pin to function as a CAN pin. +// +// \param ulName is one of the valid names for the CAN pins. +// +// This function takes one of the valid names for a CAN pin and configures +// the pin for its CAN functionality depending on the part that is defined. +// +// The valid names for the pins are as follows: \b CAN0RX, \b CAN0TX, +// \b CAN1RX, \b CAN1TX, \b CAN2RX, or \b CAN2TX. +// +// \sa GPIOPinTypeCAN() in order to configure multiple CAN pins at once. +// +// \return None. +// +//***************************************************************************** +#define PinTypeCAN(ulName) GPIOPinTypeCAN(ulName##_PORT, ulName##_PIN) + +//***************************************************************************** +// +// Configures the specified comparator pin to function as a comparator pin. +// +// \param ulName is one of the valid names for the Comparator pins. +// +// This function takes one of the valid names for a comparator pin and +// configures the pin for its comparator functionality depending on the part +// that is defined. +// +// The valid names for the pins are as follows: \b C0_MINUS, \b C0_PLUS, +// \b C1_MINUS, \b C1_PLUS, \b C2_MINUS, or \b C2_PLUS. +// +// \sa GPIOPinTypeComparator() in order to configure multiple comparator pins +// at once. +// +// \return None. +// +//***************************************************************************** +#define PinTypeComparator(ulName) \ + GPIOPinTypeComparator(ulName##_PORT, \ + ulName##_PIN) + +//***************************************************************************** +// +// Configures the specified I2C pin to function as an I2C pin. +// +// \param ulName is one of the valid names for the I2C pins. +// +// This function takes one of the valid names for an I2C pin and configures +// the pin for its I2C functionality depending on the part that is defined. +// +// The valid names for the pins are as follows: \b I2C0SCL, \b I2C0SDA, +// \b I2C1SCL, or \b I2C1SDA. +// +// \sa GPIOPinTypeI2C() in order to configure multiple I2C pins at once. +// +// \return None. +// +//***************************************************************************** +#define PinTypeI2C(ulName) GPIOPinTypeI2C(ulName##_PORT, ulName##_PIN) + +//***************************************************************************** +// +// Configures the specified PWM pin to function as a PWM pin. +// +// \param ulName is one of the valid names for the PWM pins. +// +// This function takes one of the valid names for a PWM pin and configures +// the pin for its PWM functionality depending on the part that is defined. +// +// The valid names for the pins are as follows: \b PWM0, \b PWM1, \b PWM2, +// \b PWM3, \b PWM4, \b PWM5, or \b FAULT. +// +// \sa GPIOPinTypePWM() in order to configure multiple PWM pins at once. +// +// \return None. +// +//***************************************************************************** +#define PinTypePWM(ulName) GPIOPinTypePWM(ulName##_PORT, ulName##_PIN) + +//***************************************************************************** +// +// Configures the specified QEI pin to function as a QEI pin. +// +// \param ulName is one of the valid names for the QEI pins. +// +// This function takes one of the valid names for a QEI pin and configures +// the pin for its QEI functionality depending on the part that is defined. +// +// The valid names for the pins are as follows: \b PHA0, \b PHB0, \b IDX0, +// \b PHA1, \b PHB1, or \b IDX1. +// +// \sa GPIOPinTypeQEI() in order to configure multiple QEI pins at once. +// +// \return None. +// +//***************************************************************************** +#define PinTypeQEI(ulName) GPIOPinTypeQEI(ulName##_PORT, ulName##_PIN) + +//***************************************************************************** +// +// Configures the specified SSI pin to function as an SSI pin. +// +// \param ulName is one of the valid names for the SSI pins. +// +// This function takes one of the valid names for an SSI pin and configures +// the pin for its SSI functionality depending on the part that is defined. +// +// The valid names for the pins are as follows: \b SSI0CLK, \b SSI0FSS, +// \b SSI0RX, \b SSI0TX, \b SSI1CLK, \b SSI1FSS, \b SSI1RX, or \b SSI1TX. +// +// \sa GPIOPinTypeSSI() in order to configure multiple SSI pins at once. +// +// \return None. +// +//***************************************************************************** +#define PinTypeSSI(ulName) GPIOPinTypeSSI(ulName##_PORT, ulName##_PIN) + +//***************************************************************************** +// +// Configures the specified Timer pin to function as a Timer pin. +// +// \param ulName is one of the valid names for the Timer pins. +// +// This function takes one of the valid names for a Timer pin and configures +// the pin for its Timer functionality depending on the part that is defined. +// +// The valid names for the pins are as follows: \b CCP0, \b CCP1, \b CCP2, +// \b CCP3, \b CCP4, \b CCP5, \b CCP6, or \b CCP7. +// +// \sa GPIOPinTypeTimer() in order to configure multiple CCP pins at once. +// +// \return None. +// +//***************************************************************************** +#define PinTypeTimer(ulName) GPIOPinTypeTimer(ulName##_PORT, ulName##_PIN) + +//***************************************************************************** +// +// Configures the specified UART pin to function as a UART pin. +// +// \param ulName is one of the valid names for the UART pins. +// +// This function takes one of the valid names for a UART pin and configures +// the pin for its UART functionality depending on the part that is defined. +// +// The valid names for the pins are as follows: \b U0RX, \b U0TX, \b U1RX, +// \b U1TX, \b U2RX, or \b U2TX. +// +// \sa GPIOPinTypeUART() in order to configure multiple UART pins at once. +// +// \return None. +// +//***************************************************************************** +#define PinTypeUART(ulName) GPIOPinTypeUART(ulName##_PORT, ulName##_PIN) + +//***************************************************************************** +// +//! Configures the specified USB digital pin to function as a USB pin. +//! +//! \param ulName is one of the valid names for a USB digital pin. +//! +//! This function takes one of the valid names for a USB digital pin and +//! configures the pin for its USB functionality depending on the part that is +//! defined. +//! +//! The valid names for the pins are as follows: \b EPEN or \b PFAULT. +//! +//! \sa GPIOPinTypeUSBDigital() in order to configure multiple USB pins at +//! once. +//! +//! \return None. +// +//***************************************************************************** +#define PinTypeUSBDigital(ulName) \ + GPIOPinTypeUSBDigital(ulName##_PORT, \ + ulName##_PIN) + +//***************************************************************************** +// +//! Enables the peripheral port used by the given pin. +//! +//! \param ulName is one of the valid names for a pin. +//! +//! This function takes one of the valid names for a pin function and +//! enables the peripheral port for that pin depending on the part that is +//! defined. +//! +//! Any valid pin name can be used. +//! +//! \sa SysCtlPeripheralEnable() in order to enable a single port when +//! multiple pins are on the same port. +//! +//! \return None. +// +//***************************************************************************** +#define PeripheralEnable(ulName) \ + SysCtlPeripheralEnable(ulName##_PERIPH) + +#endif // __PIN_MAP_H__ diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/pwm.c b/bsp/lm3s_9b9x/Libraries/driverlib/pwm.c new file mode 100644 index 0000000000000000000000000000000000000000..3694a362fdde165b2f4d06c2ff6b730f288daefd --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/pwm.c @@ -0,0 +1,1747 @@ +//***************************************************************************** +// +// pwm.c - API for the PWM modules +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +//***************************************************************************** +// +//! \addtogroup pwm_api +//! @{ +// +//***************************************************************************** + +#include "inc/hw_ints.h" +#include "inc/hw_memmap.h" +#include "inc/hw_pwm.h" +#include "inc/hw_sysctl.h" +#include "inc/hw_types.h" +#include "driverlib/debug.h" +#include "driverlib/interrupt.h" +#include "driverlib/pwm.h" + +//***************************************************************************** +// +// Misc macros for manipulating the encoded generator and output defines used +// by the API. +// +//***************************************************************************** +#define PWM_GEN_BADDR(_mod_, _gen_) \ + ((_mod_) + (_gen_)) +#define PWM_GEN_EXT_BADDR(_mod_, _gen_) \ + ((_mod_) + PWM_GEN_EXT_0 + \ + ((_gen_) - PWM_GEN_0) * 2) +#define PWM_OUT_BADDR(_mod_, _out_) \ + ((_mod_) + ((_out_) & 0xFFFFFFC0)) +#define PWM_IS_OUTPUT_ODD(_out_) \ + ((_out_) & 0x00000001) + +//***************************************************************************** +// +//! \internal +//! Checks a PWM generator number. +//! +//! \param ulGen is the generator number. +//! +//! This function determines if a PWM generator number is valid. +//! +//! \return Returnes \b true if the generator number is valid and \b false +//! otherwise. +// +//***************************************************************************** +#ifdef DEBUG +static tBoolean +PWMGenValid(unsigned long ulGen) +{ + return((ulGen == PWM_GEN_0) || (ulGen == PWM_GEN_1) || + (ulGen == PWM_GEN_2) || (ulGen == PWM_GEN_3)); +} +#endif + +//***************************************************************************** +// +//! \internal +//! Checks a PWM output number. +//! +//! \param ulPWMOut is the output number. +//! +//! This function determines if a PWM output number is valid. +//! +//! \return Returns \b true if the output number is valid and \b false +//! otherwise. +// +//***************************************************************************** +#ifdef DEBUG +static tBoolean +PWMOutValid(unsigned long ulPWMOut) +{ + return((ulPWMOut == PWM_OUT_0) || (ulPWMOut == PWM_OUT_1) || + (ulPWMOut == PWM_OUT_2) || (ulPWMOut == PWM_OUT_3) || + (ulPWMOut == PWM_OUT_4) || (ulPWMOut == PWM_OUT_5) || + (ulPWMOut == PWM_OUT_6) || (ulPWMOut == PWM_OUT_7)); +} +#endif + +//***************************************************************************** +// +//! Configures a PWM generator. +//! +//! \param ulBase is the base address of the PWM module. +//! \param ulGen is the PWM generator to configure. Must be one of +//! \b PWM_GEN_0, \b PWM_GEN_1, \b PWM_GEN_2, or \b PWM_GEN_3. +//! \param ulConfig is the configuration for the PWM generator. +//! +//! This function is used to set the mode of operation for a PWM generator. +//! The counting mode, synchronization mode, and debug behavior are all +//! configured. After configuration, the generator is left in the disabled +//! state. +//! +//! A PWM generator can count in two different modes: count down mode or count +//! up/down mode. In count down mode, it will count from a value down to zero, +//! and then reset to the preset value. This will produce left-aligned PWM +//! signals (that is the rising edge of the two PWM signals produced by the +//! generator will occur at the same time). In count up/down mode, it will +//! count up from zero to the preset value, count back down to zero, and then +//! repeat the process. This will produce center-aligned PWM signals (that is, +//! the middle of the high/low period of the PWM signals produced by the +//! generator will occur at the same time). +//! +//! When the PWM generator parameters (period and pulse width) are modified, +//! their affect on the output PWM signals can be delayed. In synchronous +//! mode, the parameter updates are not applied until a synchronization event +//! occurs. This allows multiple parameters to be modified and take affect +//! simultaneously, instead of one at a time. Additionally, parameters to +//! multiple PWM generators in synchronous mode can be updated simultaneously, +//! allowing them to be treated as if they were a unified generator. In +//! non-synchronous mode, the parameter updates are not delayed until a +//! synchronization event. In either mode, the parameter updates only occur +//! when the counter is at zero to help prevent oddly formed PWM signals during +//! the update (that is, a PWM pulse that is too short or too long). +//! +//! The PWM generator can either pause or continue running when the processor +//! is stopped via the debugger. If configured to pause, it will continue to +//! count until it reaches zero, at which point it will pause until the +//! processor is restarted. If configured to continue running, it will keep +//! counting as if nothing had happened. +//! +//! The \e ulConfig parameter contains the desired configuration. It is the +//! logical OR of the following: +//! +//! - \b PWM_GEN_MODE_DOWN or \b PWM_GEN_MODE_UP_DOWN to specify the counting +//! mode +//! - \b PWM_GEN_MODE_SYNC or \b PWM_GEN_MODE_NO_SYNC to specify the counter +//! load and comparator update synchronization mode +//! - \b PWM_GEN_MODE_DBG_RUN or \b PWM_GEN_MODE_DBG_STOP to specify the debug +//! behavior +//! - \b PWM_GEN_MODE_GEN_NO_SYNC, \b PWM_GEN_MODE_GEN_SYNC_LOCAL, or +//! \b PWM_GEN_MODE_GEN_SYNC_GLOBAL to specify the update synchronization +//! mode for generator counting mode changes +//! - \b PWM_GEN_MODE_DB_NO_SYNC, \b PWM_GEN_MODE_DB_SYNC_LOCAL, or +//! \b PWM_GEN_MODE_DB_SYNC_GLOBAL to specify the deadband parameter +//! synchronization mode +//! - \b PWM_GEN_MODE_FAULT_LATCHED or \b PWM_GEN_MODE_FAULT_UNLATCHED to +//! specify whether fault conditions are latched or not +//! - \b PWM_GEN_MODE_FAULT_MINPER or \b PWM_GEN_MODE_FAULT_NO_MINPER to +//! specify whether minimum fault period support is required +//! - \b PWM_GEN_MODE_FAULT_EXT or \b PWM_GEN_MODE_FAULT_LEGACY to specify +//! whether extended fault source selection support is enabled or not +//! +//! Setting \b PWM_GEN_MODE_FAULT_MINPER allows an application to set the +//! minimum duration of a PWM fault signal. Fault will be signaled for at +//! least this time even if the external fault pin deasserts earlier. Care +//! should be taken when using this mode since during the fault signal period, +//! the fault interrupt from the PWM generator will remain asserted. The fault +//! interrupt handler may, therefore, reenter immediately if it exits prior to +//! expiration of the fault timer. +//! +//! \note Changes to the counter mode will affect the period of the PWM signals +//! produced. PWMGenPeriodSet() and PWMPulseWidthSet() should be called after +//! any changes to the counter mode of a generator. +//! +//! \return None. +// +//***************************************************************************** +void +PWMGenConfigure(unsigned long ulBase, unsigned long ulGen, + unsigned long ulConfig) +{ + // + // Check the arguments. + // + ASSERT(ulBase == PWM_BASE); + ASSERT(PWMGenValid(ulGen)); + + // + // Compute the generator's base address. + // + ulGen = PWM_GEN_BADDR(ulBase, ulGen); + + // + // Change the global configuration of the generator. + // + HWREG(ulGen + PWM_O_X_CTL) = ((HWREG(ulGen + PWM_O_X_CTL) & + ~(PWM_X_CTL_MODE | PWM_X_CTL_DEBUG | + PWM_X_CTL_LATCH | PWM_X_CTL_MINFLTPER | + PWM_X_CTL_FLTSRC | PWM_X_CTL_DBFALLUPD_M | + PWM_X_CTL_DBRISEUPD_M | + PWM_X_CTL_DBCTLUPD_M | + PWM_X_CTL_GENBUPD_M | + PWM_X_CTL_GENAUPD_M | + PWM_X_CTL_LOADUPD | PWM_X_CTL_CMPAUPD | + PWM_X_CTL_CMPBUPD)) | ulConfig); + + // + // Set the individual PWM generator controls. + // + if(ulConfig & PWM_X_CTL_MODE) + { + // + // In up/down count mode, set the signal high on up count comparison + // and low on down count comparison (that is, center align the + // signals). + // + HWREG(ulGen + PWM_O_X_GENA) = (PWM_X_GENA_ACTCMPAU_ONE | + PWM_X_GENA_ACTCMPAD_ZERO); + HWREG(ulGen + PWM_O_X_GENB) = (PWM_X_GENB_ACTCMPBU_ONE | + PWM_X_GENB_ACTCMPBD_ZERO); + } + else + { + // + // In down count mode, set the signal high on load and low on count + // comparison (that is, left align the signals). + // + HWREG(ulGen + PWM_O_X_GENA) = (PWM_X_GENA_ACTLOAD_ONE | + PWM_X_GENA_ACTCMPAD_ZERO); + HWREG(ulGen + PWM_O_X_GENB) = (PWM_X_GENB_ACTLOAD_ONE | + PWM_X_GENB_ACTCMPBD_ZERO); + } +} + +//***************************************************************************** +// +//! Set the period of a PWM generator. +//! +//! \param ulBase is the base address of the PWM module. +//! \param ulGen is the PWM generator to be modified. Must be one of +//! \b PWM_GEN_0, \b PWM_GEN_1, \b PWM_GEN_2, or \b PWM_GEN_3. +//! \param ulPeriod specifies the period of PWM generator output, measured +//! in clock ticks. +//! +//! This function sets the period of the specified PWM generator block, where +//! the period of the generator block is defined as the number of PWM clock +//! ticks between pulses on the generator block zero signal. +//! +//! \note Any subsequent calls made to this function before an update occurs +//! will cause the previous values to be overwritten. +//! +//! \return None. +// +//***************************************************************************** +void +PWMGenPeriodSet(unsigned long ulBase, unsigned long ulGen, + unsigned long ulPeriod) +{ + // + // Check the arguments. + // + ASSERT(ulBase == PWM_BASE); + ASSERT(PWMGenValid(ulGen)); + + // + // Compute the generator's base address. + // + ulGen = PWM_GEN_BADDR(ulBase, ulGen); + + // + // Set the reload register based on the mode. + // + if(HWREG(ulGen + PWM_O_X_CTL) & PWM_X_CTL_MODE) + { + // + // In up/down count mode, set the reload register to half the requested + // period. + // + ASSERT((ulPeriod / 2) < 65536); + HWREG(ulGen + PWM_O_X_LOAD) = ulPeriod / 2; + } + else + { + // + // In down count mode, set the reload register to the requested period + // minus one. + // + ASSERT((ulPeriod <= 65536) && (ulPeriod != 0)); + HWREG(ulGen + PWM_O_X_LOAD) = ulPeriod - 1; + } +} + +//***************************************************************************** +// +//! Gets the period of a PWM generator block. +//! +//! \param ulBase is the base address of the PWM module. +//! \param ulGen is the PWM generator to query. Must be one of +//! \b PWM_GEN_0, \b PWM_GEN_1, \b PWM_GEN_2, or \b PWM_GEN_3. +//! +//! This function gets the period of the specified PWM generator block. The +//! period of the generator block is defined as the number of PWM clock ticks +//! between pulses on the generator block zero signal. +//! +//! If the update of the counter for the specified PWM generator has yet +//! to be completed, the value returned may not be the active period. The +//! value returned is the programmed period, measured in PWM clock ticks. +//! +//! \return Returns the programmed period of the specified generator block +//! in PWM clock ticks. +// +//***************************************************************************** +unsigned long +PWMGenPeriodGet(unsigned long ulBase, unsigned long ulGen) +{ + // + // Check the arguments. + // + ASSERT(ulBase == PWM_BASE); + ASSERT(PWMGenValid(ulGen)); + + // + // Compute the generator's base address. + // + ulGen = PWM_GEN_BADDR(ulBase, ulGen); + + // + // Figure out the counter mode. + // + if(HWREG(ulGen + PWM_O_X_CTL) & PWM_X_CTL_MODE) + { + // + // The period is twice the reload register value. + // + return(HWREG(ulGen + PWM_O_X_LOAD) * 2); + } + else + { + // + // The period is the reload register value plus one. + // + return(HWREG(ulGen + PWM_O_X_LOAD) + 1); + } +} + +//***************************************************************************** +// +//! Enables the timer/counter for a PWM generator block. +//! +//! \param ulBase is the base address of the PWM module. +//! \param ulGen is the PWM generator to be enabled. Must be one of +//! \b PWM_GEN_0, \b PWM_GEN_1, \b PWM_GEN_2, or \b PWM_GEN_3. +//! +//! This function allows the PWM clock to drive the timer/counter for the +//! specified generator block. +//! +//! \return None. +// +//***************************************************************************** +void +PWMGenEnable(unsigned long ulBase, unsigned long ulGen) +{ + // + // Check the arguments. + // + ASSERT(ulBase == PWM_BASE); + ASSERT(PWMGenValid(ulGen)); + + // + // Enable the PWM generator. + // + HWREG(PWM_GEN_BADDR(ulBase, ulGen) + PWM_O_X_CTL) |= PWM_X_CTL_ENABLE; +} + +//***************************************************************************** +// +//! Disables the timer/counter for a PWM generator block. +//! +//! \param ulBase is the base address of the PWM module. +//! \param ulGen is the PWM generator to be disabled. Must be one of +//! \b PWM_GEN_0, \b PWM_GEN_1, \b PWM_GEN_2, or \b PWM_GEN_3. +//! +//! This function blocks the PWM clock from driving the timer/counter for the +//! specified generator block. +//! +//! \return None. +// +//***************************************************************************** +void +PWMGenDisable(unsigned long ulBase, unsigned long ulGen) +{ + // + // Check the arguments. + // + ASSERT(ulBase == PWM_BASE); + ASSERT(PWMGenValid(ulGen)); + + // + // Disable the PWM generator. + // + HWREG(PWM_GEN_BADDR(ulBase, + ulGen) + PWM_O_X_CTL) &= ~(PWM_X_CTL_ENABLE); +} + +//***************************************************************************** +// +//! Sets the pulse width for the specified PWM output. +//! +//! \param ulBase is the base address of the PWM module. +//! \param ulPWMOut is the PWM output to modify. Must be one of \b PWM_OUT_0, +//! \b PWM_OUT_1, \b PWM_OUT_2, \b PWM_OUT_3, \b PWM_OUT_4, \b PWM_OUT_5, +//! \b PWM_OUT_6, or \b PWM_OUT_7. +//! \param ulWidth specifies the width of the positive portion of the pulse. +//! +//! This function sets the pulse width for the specified PWM output, where the +//! pulse width is defined as the number of PWM clock ticks. +//! +//! \note Any subsequent calls made to this function before an update occurs +//! will cause the previous values to be overwritten. +//! +//! \return None. +// +//***************************************************************************** +void +PWMPulseWidthSet(unsigned long ulBase, unsigned long ulPWMOut, + unsigned long ulWidth) +{ + unsigned long ulGenBase, ulReg; + + // + // Check the arguments. + // + ASSERT(ulBase == PWM_BASE); + ASSERT(PWMOutValid(ulPWMOut)); + + // + // Compute the generator's base address. + // + ulGenBase = PWM_OUT_BADDR(ulBase, ulPWMOut); + + // + // If the counter is in up/down count mode, divide the width by two. + // + if(HWREG(ulGenBase + PWM_O_X_CTL) & PWM_X_CTL_MODE) + { + ulWidth /= 2; + } + + // + // Get the period. + // + ulReg = HWREG(ulGenBase + PWM_O_X_LOAD); + + // + // Make sure the width is not too large. + // + ASSERT(ulWidth < ulReg); + + // + // Compute the compare value. + // + ulReg = ulReg - ulWidth; + + // + // Write to the appropriate registers. + // + if(PWM_IS_OUTPUT_ODD(ulPWMOut)) + { + HWREG(ulGenBase + PWM_O_X_CMPB) = ulReg; + } + else + { + HWREG(ulGenBase + PWM_O_X_CMPA) = ulReg; + } +} + +//***************************************************************************** +// +//! Gets the pulse width of a PWM output. +//! +//! \param ulBase is the base address of the PWM module. +//! \param ulPWMOut is the PWM output to query. Must be one of \b PWM_OUT_0, +//! \b PWM_OUT_1, \b PWM_OUT_2, \b PWM_OUT_3, \b PWM_OUT_4, \b PWM_OUT_5, +//! \b PWM_OUT_6, or \b PWM_OUT_7. +//! +//! This function gets the currently programmed pulse width for the specified +//! PWM output. If the update of the comparator for the specified output has +//! yet to be completed, the value returned may not be the active pulse width. +//! The value returned is the programmed pulse width, measured in PWM clock +//! ticks. +//! +//! \return Returns the width of the pulse in PWM clock ticks. +// +//***************************************************************************** +unsigned long +PWMPulseWidthGet(unsigned long ulBase, unsigned long ulPWMOut) +{ + unsigned long ulGenBase, ulReg, ulLoad; + + // + // Check the arguments. + // + ASSERT(ulBase == PWM_BASE); + ASSERT(PWMOutValid(ulPWMOut)); + + // + // Compute the generator's base address. + // + ulGenBase = PWM_OUT_BADDR(ulBase, ulPWMOut); + + // + // Then compute the pulse width. If mode is UpDown, set + // width = (load - compare) * 2. Otherwise, set width = load - compare. + // + ulLoad = HWREG(ulGenBase + PWM_O_X_LOAD); + if(PWM_IS_OUTPUT_ODD(ulPWMOut)) + { + ulReg = HWREG(ulGenBase + PWM_O_X_CMPB); + } + else + { + ulReg = HWREG(ulGenBase + PWM_O_X_CMPA); + } + ulReg = ulLoad - ulReg; + + // + // If in up/down count mode, double the pulse width. + // + if(HWREG(ulGenBase + PWM_O_X_CTL) & PWM_X_CTL_MODE) + { + ulReg = ulReg * 2; + } + + // + // Return the pulse width. + // + return(ulReg); +} + +//***************************************************************************** +// +//! Enables the PWM dead band output, and sets the dead band delays. +//! +//! \param ulBase is the base address of the PWM module. +//! \param ulGen is the PWM generator to modify. Must be one of +//! \b PWM_GEN_0, \b PWM_GEN_1, \b PWM_GEN_2, or \b PWM_GEN_3. +//! \param usRise specifies the width of delay from the rising edge. +//! \param usFall specifies the width of delay from the falling edge. +//! +//! This function sets the dead bands for the specified PWM generator, +//! where the dead bands are defined as the number of \b PWM clock ticks +//! from the rising or falling edge of the generator's \b OutA signal. +//! Note that this function causes the coupling of \b OutB to \b OutA. +//! +//! \return None. +// +//***************************************************************************** +void +PWMDeadBandEnable(unsigned long ulBase, unsigned long ulGen, + unsigned short usRise, unsigned short usFall) +{ + // + // Check the arguments. + // + ASSERT(ulBase == PWM_BASE); + ASSERT(PWMGenValid(ulGen)); + ASSERT(usRise < 4096); + ASSERT(usFall < 4096); + + // + // Compute the generator's base address. + // + ulGen = PWM_GEN_BADDR(ulBase, ulGen); + + // + // Write the dead band delay values. + // + HWREG(ulGen + PWM_O_X_DBRISE) = usRise; + HWREG(ulGen + PWM_O_X_DBFALL) = usFall; + + // + // Enable the deadband functionality. + // + HWREG(ulGen + PWM_O_X_DBCTL) |= PWM_X_DBCTL_ENABLE; +} + +//***************************************************************************** +// +//! Disables the PWM dead band output. +//! +//! \param ulBase is the base address of the PWM module. +//! \param ulGen is the PWM generator to modify. Must be one of +//! \b PWM_GEN_0, \b PWM_GEN_1, \b PWM_GEN_2, or \b PWM_GEN_3. +//! +//! This function disables the dead band mode for the specified PWM generator. +//! Doing so decouples the \b OutA and \b OutB signals. +//! +//! \return None. +// +//***************************************************************************** +void +PWMDeadBandDisable(unsigned long ulBase, unsigned long ulGen) +{ + // + // Check the arguments. + // + ASSERT(ulBase == PWM_BASE); + ASSERT(PWMGenValid(ulGen)); + + // + // Disable the deadband functionality. + // + HWREG(PWM_GEN_BADDR(ulBase, ulGen) + PWM_O_X_DBCTL) &= + ~(PWM_X_DBCTL_ENABLE); +} + +//***************************************************************************** +// +//! Synchronizes all pending updates. +//! +//! \param ulBase is the base address of the PWM module. +//! \param ulGenBits are the PWM generator blocks to be updated. Must be the +//! logical OR of any of \b PWM_GEN_0_BIT, \b PWM_GEN_1_BIT, +//! \b PWM_GEN_2_BIT, or \b PWM_GEN_3_BIT. +//! +//! For the selected PWM generators, this function causes all queued updates to +//! the period or pulse width to be applied the next time the corresponding +//! counter becomes zero. +//! +//! \return None. +// +//***************************************************************************** +void +PWMSyncUpdate(unsigned long ulBase, unsigned long ulGenBits) +{ + // + // Check the arguments. + // + ASSERT(ulBase == PWM_BASE); + ASSERT(!(ulGenBits & ~(PWM_GEN_0_BIT | PWM_GEN_1_BIT | PWM_GEN_2_BIT | + PWM_GEN_3_BIT))); + + // + // Synchronize pending PWM register changes. + // + HWREG(ulBase + PWM_O_CTL) = ulGenBits; +} + +//***************************************************************************** +// +//! Synchronizes the counters in one or multiple PWM generator blocks. +//! +//! \param ulBase is the base address of the PWM module. +//! \param ulGenBits are the PWM generator blocks to be synchronized. Must be +//! the logical OR of any of \b PWM_GEN_0_BIT, \b PWM_GEN_1_BIT, +//! \b PWM_GEN_2_BIT, or \b PWM_GEN_3_BIT. +//! +//! For the selected PWM module, this function synchronizes the time base +//! of the generator blocks by causing the specified generator counters to be +//! reset to zero. +//! +//! \return None. +// +//***************************************************************************** +void +PWMSyncTimeBase(unsigned long ulBase, unsigned long ulGenBits) +{ + // + // Check the arguments. + // + ASSERT(ulBase == PWM_BASE); + ASSERT(!(ulGenBits & ~(PWM_GEN_0_BIT | PWM_GEN_1_BIT | PWM_GEN_2_BIT | + PWM_GEN_3_BIT))); + + // + // Synchronize the counters in the specified generators by writing to the + // module's synchronization register. + // + HWREG(ulBase + PWM_O_SYNC) = ulGenBits; +} + +//***************************************************************************** +// +//! Enables or disables PWM outputs. +//! +//! \param ulBase is the base address of the PWM module. +//! \param ulPWMOutBits are the PWM outputs to be modified. Must be the +//! logical OR of any of \b PWM_OUT_0_BIT, \b PWM_OUT_1_BIT, \b PWM_OUT_2_BIT, +//! \b PWM_OUT_3_BIT, \b PWM_OUT_4_BIT, \b PWM_OUT_5_BIT, \b PWM_OUT_6_BIT, +//! or \b PWM_OUT_7_BIT. +//! \param bEnable determines if the signal is enabled or disabled. +//! +//! This function is used to enable or disable the selected PWM outputs. The +//! outputs are selected using the parameter \e ulPWMOutBits. The parameter +//! \e bEnable determines the state of the selected outputs. If \e bEnable is +//! \b true, then the selected PWM outputs are enabled, or placed in the active +//! state. If \e bEnable is \b false, then the selected outputs are disabled, +//! or placed in the inactive state. +//! +//! \return None. +// +//***************************************************************************** +void +PWMOutputState(unsigned long ulBase, unsigned long ulPWMOutBits, + tBoolean bEnable) +{ + // + // Check the arguments. + // + ASSERT(ulBase == PWM_BASE); + ASSERT(!(ulPWMOutBits & ~(PWM_OUT_0_BIT | PWM_OUT_1_BIT | PWM_OUT_2_BIT | + PWM_OUT_3_BIT | PWM_OUT_4_BIT | PWM_OUT_5_BIT | + PWM_OUT_6_BIT | PWM_OUT_7_BIT))); + + // + // Read the module's ENABLE output control register, and set or clear the + // requested bits. + // + if(bEnable == true) + { + HWREG(ulBase + PWM_O_ENABLE) |= ulPWMOutBits; + } + else + { + HWREG(ulBase + PWM_O_ENABLE) &= ~(ulPWMOutBits); + } +} + +//***************************************************************************** +// +//! Selects the inversion mode for PWM outputs. +//! +//! \param ulBase is the base address of the PWM module. +//! \param ulPWMOutBits are the PWM outputs to be modified. Must be the +//! logical OR of any of \b PWM_OUT_0_BIT, \b PWM_OUT_1_BIT, \b PWM_OUT_2_BIT, +//! \b PWM_OUT_3_BIT, \b PWM_OUT_4_BIT, \b PWM_OUT_5_BIT, \b PWM_OUT_6_BIT, or +//! \b PWM_OUT_7_BIT. +//! \param bInvert determines if the signal is inverted or passed through. +//! +//! This function is used to select the inversion mode for the selected PWM +//! outputs. The outputs are selected using the parameter \e ulPWMOutBits. +//! The parameter \e bInvert determines the inversion mode for the selected +//! outputs. If \e bInvert is \b true, this function will cause the specified +//! PWM output signals to be inverted, or made active low. If \e bInvert is +//! \b false, the specified output will be passed through as is, or be made +//! active high. +//! +//! \return None. +// +//***************************************************************************** +void +PWMOutputInvert(unsigned long ulBase, unsigned long ulPWMOutBits, + tBoolean bInvert) +{ + // + // Check the arguments. + // + ASSERT(ulBase == PWM_BASE); + ASSERT(!(ulPWMOutBits & ~(PWM_OUT_0_BIT | PWM_OUT_1_BIT | PWM_OUT_2_BIT | + PWM_OUT_3_BIT | PWM_OUT_4_BIT | PWM_OUT_5_BIT | + PWM_OUT_6_BIT | PWM_OUT_7_BIT))); + + // + // Read the module's INVERT output control register, and set or clear the + // requested bits. + // + if(bInvert == true) + { + HWREG(ulBase + PWM_O_INVERT) |= ulPWMOutBits; + } + else + { + HWREG(ulBase + PWM_O_INVERT) &= ~(ulPWMOutBits); + } +} + +//***************************************************************************** +// +//! Specifies the level of PWM outputs suppressed in response to a fault +//! condition. +//! +//! \param ulBase is the base address of the PWM module. +//! \param ulPWMOutBits are the PWM outputs to be modified. Must be the +//! logical OR of any of \b PWM_OUT_0_BIT, \b PWM_OUT_1_BIT, \b PWM_OUT_2_BIT, +//! \b PWM_OUT_3_BIT, \b PWM_OUT_4_BIT, \b PWM_OUT_5_BIT, \b PWM_OUT_6_BIT, or +//! \b PWM_OUT_7_BIT. +//! \param bDriveHigh determines if the signal is driven high or low during an +//! active fault condition. +//! +//! This function determines whether a PWM output pin that is suppressed in +//! response to a fault condition will be driven high or low. The affected +//! outputs are selected using the parameter \e ulPWMOutBits. The parameter +//! \e bDriveHigh determines the output level for the pins identified by +//! \e ulPWMOutBits. If \e bDriveHigh is \b true then the selected outputs +//! will be driven high when a fault is detected. If it is \e false, the pins +//! will be driven low. +//! +//! In a fault condition, pins which have not been configured to be suppressed +//! via a call to PWMOutputFault() are unaffected by this function. +//! +//! \note This function is available only on devices which support extended +//! PWM fault handling. +//! +//! \return None. +// +//***************************************************************************** +void +PWMOutputFaultLevel(unsigned long ulBase, unsigned long ulPWMOutBits, + tBoolean bDriveHigh) +{ + // + // Check the arguments. + // + ASSERT(HWREG(SYSCTL_DC5) & SYSCTL_DC5_PWMEFLT); + ASSERT(ulBase == PWM_BASE); + ASSERT(!(ulPWMOutBits & ~(PWM_OUT_0_BIT | PWM_OUT_1_BIT | PWM_OUT_2_BIT | + PWM_OUT_3_BIT | PWM_OUT_4_BIT | PWM_OUT_5_BIT | + PWM_OUT_6_BIT | PWM_OUT_7_BIT))); + + // + // Read the module's FAULT output control register, and set or clear the + // requested bits. + // + if(bDriveHigh == true) + { + HWREG(ulBase + PWM_O_FAULTVAL) |= ulPWMOutBits; + } + else + { + HWREG(ulBase + PWM_O_FAULTVAL) &= ~(ulPWMOutBits); + } +} + +//***************************************************************************** +// +//! Specifies the state of PWM outputs in response to a fault condition. +//! +//! \param ulBase is the base address of the PWM module. +//! \param ulPWMOutBits are the PWM outputs to be modified. Must be the +//! logical OR of any of \b PWM_OUT_0_BIT, \b PWM_OUT_1_BIT, \b PWM_OUT_2_BIT, +//! \b PWM_OUT_3_BIT, \b PWM_OUT_4_BIT, \b PWM_OUT_5_BIT, \b PWM_OUT_6_BIT, or +//! \b PWM_OUT_7_BIT. +//! \param bFaultSuppress determines if the signal is suppressed or passed +//! through during an active fault condition. +//! +//! This function sets the fault handling characteristics of the selected PWM +//! outputs. The outputs are selected using the parameter \e ulPWMOutBits. +//! The parameter \e bFaultSuppress determines the fault handling +//! characteristics for the selected outputs. If \e bFaultSuppress is \b true, +//! then the selected outputs will be made inactive. If \e bFaultSuppress is +//! \b false, then the selected outputs are unaffected by the detected fault. +//! +//! On devices supporting extended PWM fault handling, the state the affected +//! output pins are driven to can be configured with PWMOutputFaultLevel(). If +//! not configured, or if the device does not support extended PWM fault +//! handling, affected outputs will be driven low on a fault condition. +//! +//! \return None. +// +//***************************************************************************** +void +PWMOutputFault(unsigned long ulBase, unsigned long ulPWMOutBits, + tBoolean bFaultSuppress) +{ + // + // Check the arguments. + // + ASSERT(ulBase == PWM_BASE); + ASSERT(!(ulPWMOutBits & ~(PWM_OUT_0_BIT | PWM_OUT_1_BIT | PWM_OUT_2_BIT | + PWM_OUT_3_BIT | PWM_OUT_4_BIT | PWM_OUT_5_BIT | + PWM_OUT_6_BIT | PWM_OUT_7_BIT))); + + // + // Read the module's FAULT output control register, and set or clear the + // requested bits. + // + if(bFaultSuppress == true) + { + HWREG(ulBase + PWM_O_FAULT) |= ulPWMOutBits; + } + else + { + HWREG(ulBase + PWM_O_FAULT) &= ~(ulPWMOutBits); + } +} + +//***************************************************************************** +// +//! Registers an interrupt handler for the specified PWM generator block. +//! +//! \param ulBase is the base address of the PWM module. +//! \param ulGen is the PWM generator in question. Must be one of +//! \b PWM_GEN_0, \b PWM_GEN_1, \b PWM_GEN_2, or \b PWM_GEN_3. +//! \param pfnIntHandler is a pointer to the function to be called when the PWM +//! generator interrupt occurs. +//! +//! This function will ensure that the interrupt handler specified by +//! \e pfnIntHandler is called when an interrupt is detected for the specified +//! PWM generator block. This function will also enable the corresponding +//! PWM generator interrupt in the interrupt controller; individual generator +//! interrupts and interrupt sources must be enabled with PWMIntEnable() and +//! PWMGenIntTrigEnable(). +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +PWMGenIntRegister(unsigned long ulBase, unsigned long ulGen, + void (*pfnIntHandler)(void)) +{ + unsigned long ulInt; + + // + // Check the arguments. + // + ASSERT(ulBase == PWM_BASE); + ASSERT(PWMGenValid(ulGen)); + + // + // Get the interrupt number associated with the specified generator. + // + if(ulGen == PWM_GEN_3) + { + ulInt = INT_PWM3; + } + else + { + ulInt = INT_PWM0 + (ulGen >> 6) - 1; + } + + // + // Register the interrupt handler. + // + IntRegister(ulInt, pfnIntHandler); + + // + // Enable the PWMx interrupt. + // + IntEnable(ulInt); +} + +//***************************************************************************** +// +//! Removes an interrupt handler for the specified PWM generator block. +//! +//! \param ulBase is the base address of the PWM module. +//! \param ulGen is the PWM generator in question. Must be one of +//! \b PWM_GEN_0, \b PWM_GEN_1, \b PWM_GEN_2, or \b PWM_GEN_3. +//! +//! This function will unregister the interrupt handler for the specified +//! PWM generator block. This function will also disable the corresponding +//! PWM generator interrupt in the interrupt controller; individual generator +//! interrupts and interrupt sources must be disabled with PWMIntDisable() and +//! PWMGenIntTrigDisable(). +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +PWMGenIntUnregister(unsigned long ulBase, unsigned long ulGen) +{ + unsigned long ulInt; + + // + // Check the arguments. + // + ASSERT(ulBase == PWM_BASE); + ASSERT(PWMGenValid(ulGen)); + + // + // Get the interrupt number associated with the specified generator. + // + if(ulGen == PWM_GEN_3) + { + ulInt = INT_PWM3; + } + else + { + ulInt = INT_PWM0 + (ulGen >> 6) - 1; + } + + // + // Disable the PWMx interrupt. + // + IntDisable(ulInt); + + // + // Unregister the interrupt handler. + // + IntUnregister(ulInt); +} + +//***************************************************************************** +// +//! Registers an interrupt handler for a fault condition detected in a PWM +//! module. +//! +//! \param ulBase is the base address of the PWM module. +//! \param pfnIntHandler is a pointer to the function to be called when the PWM +//! fault interrupt occurs. +//! +//! This function will ensure that the interrupt handler specified by +//! \e pfnIntHandler is called when a fault interrupt is detected for the +//! selected PWM module. This function will also enable the PWM fault +//! interrupt in the NVIC; the PWM fault interrupt must also be enabled at the +//! module level using PWMIntEnable(). +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +PWMFaultIntRegister(unsigned long ulBase, void (*pfnIntHandler)(void)) +{ + // + // Check the arguments. + // + ASSERT(ulBase == PWM_BASE); + + // + // Register the interrupt handler, returning an error if one occurs. + // + IntRegister(INT_PWM_FAULT, pfnIntHandler); + + // + // Enable the PWM fault interrupt. + // + IntEnable(INT_PWM_FAULT); +} + +//***************************************************************************** +// +//! Removes the PWM fault condition interrupt handler. +//! +//! \param ulBase is the base address of the PWM module. +//! +//! This function will remove the interrupt handler for a PWM fault interrupt +//! from the selected PWM module. This function will also disable the PWM +//! fault interrupt in the NVIC; the PWM fault interrupt must also be disabled +//! at the module level using PWMIntDisable(). +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +PWMFaultIntUnregister(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == PWM_BASE); + + // + // Disable the PWM fault interrupt. + // + IntDisable(INT_PWM_FAULT); + + // + // Unregister the interrupt handler, returning an error if one occurs. + // + IntUnregister(INT_PWM_FAULT); +} + +//***************************************************************************** +// +//! Enables interrupts and triggers for the specified PWM generator block. +//! +//! \param ulBase is the base address of the PWM module. +//! \param ulGen is the PWM generator to have interrupts and triggers enabled. +//! Must be one of \b PWM_GEN_0, \b PWM_GEN_1, \b PWM_GEN_2, or \b PWM_GEN_3. +//! \param ulIntTrig specifies the interrupts and triggers to be enabled. +//! +//! Unmasks the specified interrupt(s) and trigger(s) by setting the +//! specified bits of the interrupt/trigger enable register for the specified +//! PWM generator. The \e ulIntTrig parameter is the logical OR of +//! \b PWM_INT_CNT_ZERO, \b PWM_INT_CNT_LOAD, \b PWM_INT_CNT_AU, +//! \b PWM_INT_CNT_AD, \b PWM_INT_CNT_BU, \b PWM_INT_CNT_BD, +//! \b PWM_TR_CNT_ZERO, \b PWM_TR_CNT_LOAD, \b PWM_TR_CNT_AU, \b PWM_TR_CNT_AD, +//! \b PWM_TR_CNT_BU, or \b PWM_TR_CNT_BD. +//! +//! \return None. +// +//***************************************************************************** +void +PWMGenIntTrigEnable(unsigned long ulBase, unsigned long ulGen, + unsigned long ulIntTrig) +{ + // + // Check the arguments. + // + ASSERT(ulBase == PWM_BASE); + ASSERT(PWMGenValid(ulGen)); + ASSERT((ulIntTrig & ~(PWM_INT_CNT_ZERO | PWM_INT_CNT_LOAD | + PWM_INT_CNT_AU | PWM_INT_CNT_AD | PWM_INT_CNT_BU | + PWM_INT_CNT_BD | PWM_TR_CNT_ZERO | PWM_TR_CNT_LOAD | + PWM_TR_CNT_AU | PWM_TR_CNT_AD | PWM_TR_CNT_BU | + PWM_TR_CNT_BD)) == 0); + + // + // Enable the specified interrupts/triggers. + // + HWREG(PWM_GEN_BADDR(ulBase, ulGen) + PWM_O_X_INTEN) |= ulIntTrig; +} + +//***************************************************************************** +// +//! Disables interrupts for the specified PWM generator block. +//! +//! \param ulBase is the base address of the PWM module. +//! \param ulGen is the PWM generator to have interrupts and triggers disabled. +//! Must be one of \b PWM_GEN_0, \b PWM_GEN_1, \b PWM_GEN_2, or \b PWM_GEN_3. +//! \param ulIntTrig specifies the interrupts and triggers to be disabled. +//! +//! Masks the specified interrupt(s) and trigger(s) by clearing the +//! specified bits of the interrupt/trigger enable register for the specified +//! PWM generator. The \e ulIntTrig parameter is the logical OR of +//! \b PWM_INT_CNT_ZERO, \b PWM_INT_CNT_LOAD, \b PWM_INT_CNT_AU, +//! \b PWM_INT_CNT_AD, \b PWM_INT_CNT_BU, \b PWM_INT_CNT_BD, +//! \b PWM_TR_CNT_ZERO, \b PWM_TR_CNT_LOAD, \b PWM_TR_CNT_AU, \b PWM_TR_CNT_AD, +//! \b PWM_TR_CNT_BU, or \b PWM_TR_CNT_BD. +//! +//! \return None. +// +//***************************************************************************** +void +PWMGenIntTrigDisable(unsigned long ulBase, unsigned long ulGen, + unsigned long ulIntTrig) +{ + // + // Check the arguments. + // + ASSERT(ulBase == PWM_BASE); + ASSERT(PWMGenValid(ulGen)); + ASSERT((ulIntTrig & ~(PWM_INT_CNT_ZERO | PWM_INT_CNT_LOAD | + PWM_INT_CNT_AU | PWM_INT_CNT_AD | PWM_INT_CNT_BU | + PWM_INT_CNT_BD | PWM_TR_CNT_ZERO | PWM_TR_CNT_LOAD | + PWM_TR_CNT_AU | PWM_TR_CNT_AD | PWM_TR_CNT_BU | + PWM_TR_CNT_BD)) == 0); + + // + // Disable the specified interrupts/triggers. + // + HWREG(PWM_GEN_BADDR(ulBase, ulGen) + PWM_O_X_INTEN) &= ~(ulIntTrig); +} + +//***************************************************************************** +// +//! Gets interrupt status for the specified PWM generator block. +//! +//! \param ulBase is the base address of the PWM module. +//! \param ulGen is the PWM generator to query. Must be one of \b PWM_GEN_0, +//! \b PWM_GEN_1, \b PWM_GEN_2, or \b PWM_GEN_3. +//! \param bMasked specifies whether masked or raw interrupt status is +//! returned. +//! +//! If \e bMasked is set as \b true, then the masked interrupt status is +//! returned; otherwise, the raw interrupt status will be returned. +//! +//! \return Returns the contents of the interrupt status register, or the +//! contents of the raw interrupt status register, for the specified +//! PWM generator. +// +//***************************************************************************** +unsigned long +PWMGenIntStatus(unsigned long ulBase, unsigned long ulGen, tBoolean bMasked) +{ + // + // Check the arguments. + // + ASSERT(ulBase == PWM_BASE); + ASSERT(PWMGenValid(ulGen)); + + // + // Compute the generator's base address. + // + ulGen = PWM_GEN_BADDR(ulBase, ulGen); + + // + // Read and return the specified generator's raw or enabled interrupt + // status. + // + if(bMasked == true) + { + return(HWREG(ulGen + PWM_O_X_ISC)); + } + else + { + return(HWREG(ulGen + PWM_O_X_RIS)); + } +} + +//***************************************************************************** +// +//! Clears the specified interrupt(s) for the specified PWM generator block. +//! +//! \param ulBase is the base address of the PWM module. +//! \param ulGen is the PWM generator to query. Must be one of \b PWM_GEN_0, +//! \b PWM_GEN_1, \b PWM_GEN_2, or \b PWM_GEN_3. +//! \param ulInts specifies the interrupts to be cleared. +//! +//! Clears the specified interrupt(s) by writing a 1 to the specified bits +//! of the interrupt status register for the specified PWM generator. The +//! \e ulInts parameter is the logical OR of \b PWM_INT_CNT_ZERO, +//! \b PWM_INT_CNT_LOAD, \b PWM_INT_CNT_AU, \b PWM_INT_CNT_AD, +//! \b PWM_INT_CNT_BU, or \b PWM_INT_CNT_BD. +//! +//! \note Since there is a write buffer in the Cortex-M3 processor, it may take +//! several clock cycles before the interrupt source is actually cleared. +//! Therefore, it is recommended that the interrupt source be cleared early in +//! the interrupt handler (as opposed to the very last action) to avoid +//! returning from the interrupt handler before the interrupt source is +//! actually cleared. Failure to do so may result in the interrupt handler +//! being immediately reentered (since NVIC still sees the interrupt source +//! asserted). +//! +//! \return None. +// +//***************************************************************************** +void +PWMGenIntClear(unsigned long ulBase, unsigned long ulGen, unsigned long ulInts) +{ + // + // Check the arguments. + // + ASSERT(ulBase == PWM_BASE); + ASSERT(PWMGenValid(ulGen)); + ASSERT((ulInts & ~(PWM_INT_CNT_ZERO | PWM_INT_CNT_LOAD | PWM_INT_CNT_AU | + PWM_INT_CNT_AD | PWM_INT_CNT_BU | PWM_INT_CNT_BD)) == + 0); + + // + // Clear the requested interrupts by writing ones to the specified bit + // of the module's interrupt enable register. + // + HWREG(PWM_GEN_BADDR(ulBase, ulGen) + PWM_O_X_ISC) = ulInts; +} + +//***************************************************************************** +// +//! Enables generator and fault interrupts for a PWM module. +//! +//! \param ulBase is the base address of the PWM module. +//! \param ulGenFault contains the interrupts to be enabled. Must be a logical +//! OR of any of \b PWM_INT_GEN_0, \b PWM_INT_GEN_1, \b PWM_INT_GEN_2, +//! \b PWM_INT_GEN_3, \b PWM_INT_FAULT0, \b PWM_INT_FAULT1, \b PWM_INT_FAULT2, +//! or \b PWM_INT_FAULT3. +//! +//! Unmasks the specified interrupt(s) by setting the specified bits of +//! the interrupt enable register for the selected PWM module. +//! +//! \return None. +// +//***************************************************************************** +void +PWMIntEnable(unsigned long ulBase, unsigned long ulGenFault) +{ + // + // Check the arguments. + // + ASSERT(ulBase == PWM_BASE); + ASSERT((ulGenFault & ~(PWM_INT_GEN_0 | PWM_INT_GEN_1 | PWM_INT_GEN_2 | + PWM_INT_GEN_3 | PWM_INT_FAULT0 | PWM_INT_FAULT1 | + PWM_INT_FAULT2 | PWM_INT_FAULT3)) == 0); + + // + // Read the module's interrupt enable register, and enable interrupts + // for the specified PWM generators. + // + HWREG(ulBase + PWM_O_INTEN) |= ulGenFault; +} + +//***************************************************************************** +// +//! Disables generator and fault interrupts for a PWM module. +//! +//! \param ulBase is the base address of the PWM module. +//! \param ulGenFault contains the interrupts to be disabled. Must be a +//! logical OR of any of \b PWM_INT_GEN_0, \b PWM_INT_GEN_1, \b PWM_INT_GEN_2, +//! \b PWM_INT_GEN_3, \b PWM_INT_FAULT0, \b PWM_INT_FAULT1, \b PWM_INT_FAULT2, +//! or \b PWM_INT_FAULT3. +//! +//! Masks the specified interrupt(s) by clearing the specified bits of +//! the interrupt enable register for the selected PWM module. +//! +//! \return None. +// +//***************************************************************************** +void +PWMIntDisable(unsigned long ulBase, unsigned long ulGenFault) +{ + // + // Check the arguments. + // + ASSERT(ulBase == PWM_BASE); + ASSERT((ulGenFault & ~(PWM_INT_GEN_0 | PWM_INT_GEN_1 | PWM_INT_GEN_2 | + PWM_INT_GEN_3 | PWM_INT_FAULT0 | PWM_INT_FAULT1 | + PWM_INT_FAULT2 | PWM_INT_FAULT3)) == 0); + + // + // Read the module's interrupt enable register, and disable interrupts + // for the specified PWM generators. + // + HWREG(ulBase + PWM_O_INTEN) &= ~(ulGenFault); +} + +//***************************************************************************** +// +//! Clears the fault interrupt for a PWM module. +//! +//! \param ulBase is the base address of the PWM module. +//! +//! Clears the fault interrupt by writing to the appropriate bit of the +//! interrupt status register for the selected PWM module. +//! +//! This function clears only the FAULT0 interrupt and is retained for +//! backwards compatibility. It is recommended that PWMFaultIntClearExt() be +//! used instead since it supports all fault interrupts supported on devices +//! with and without extended PWM fault handling support. +//! +//! \note Since there is a write buffer in the Cortex-M3 processor, it may take +//! several clock cycles before the interrupt source is actually cleared. +//! Therefore, it is recommended that the interrupt source be cleared early in +//! the interrupt handler (as opposed to the very last action) to avoid +//! returning from the interrupt handler before the interrupt source is +//! actually cleared. Failure to do so may result in the interrupt handler +//! being immediately reentered (since NVIC still sees the interrupt source +//! asserted). +//! +//! \return None. +// +//***************************************************************************** +void +PWMFaultIntClear(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == PWM_BASE); + + // + // Write the only writeable bit in the module's interrupt register. + // + HWREG(ulBase + PWM_O_ISC) = PWM_ISC_INTFAULT0; +} + +//***************************************************************************** +// +//! Gets the interrupt status for a PWM module. +//! +//! \param ulBase is the base address of the PWM module. +//! \param bMasked specifies whether masked or raw interrupt status is +//! returned. +//! +//! If \e bMasked is set as \b true, then the masked interrupt status is +//! returned; otherwise, the raw interrupt status will be returned. +//! +//! \return The current interrupt status, enumerated as a bit field of +//! \b PWM_INT_GEN_0, \b PWM_INT_GEN_1, \b PWM_INT_GEN_2, \b PWM_INT_GEN_3, +//! \b PWM_INT_FAULT0, \b PWM_INT_FAULT1, \b PWM_INT_FAULT2, and +//! \b PWM_INT_FAULT3. +//! +//***************************************************************************** +unsigned long +PWMIntStatus(unsigned long ulBase, tBoolean bMasked) +{ + // + // Check the arguments. + // + ASSERT(ulBase == PWM_BASE); + + // + // Read and return either the module's raw or enabled interrupt status. + // + if(bMasked == true) + { + return(HWREG(ulBase + PWM_O_ISC)); + } + else + { + return(HWREG(ulBase + PWM_O_RIS)); + } +} + +//***************************************************************************** +// +//! Clears the fault interrupt for a PWM module. +//! +//! \param ulBase is the base address of the PWM module. +//! \param ulFaultInts specifies the fault interrupts to clear. +//! +//! Clears one or more fault interrupts by writing to the appropriate bit of +//! the PWM interrupt status register. The parameter \e ulFaultInts must be +//! the logical OR of any of \b PWM_INT_FAULT0, \b PWM_INT_FAULT1, +//! \b PWM_INT_FAULT2, or \b PWM_INT_FAULT3. +//! +//! When running on a device supporting extended PWM fault handling, the fault +//! interrupts are derived by performing a logical OR of each of the configured +//! fault trigger signals for a given generator. Therefore, these interrupts +//! are not directly related to the four possible FAULTn inputs to the device +//! but indicate that a fault has been signaled to one of the four possible PWM +//! generators. On a device without extended PWM fault handling, the interrupt +//! is directly related to the state of the single FAULT pin. +//! +//! \note Since there is a write buffer in the Cortex-M3 processor, it may take +//! several cycles before the interrupt source is actually cleared. Therefore, +//! it is recommended that the interrupt source be cleared early in the +//! interrupt handler (as opposed to the very last action) to avoid returning +//! from the interrupt handler before the interrupt source is actually cleared. +//! Failure to do so may result in the interrupt handler being immediately +//! reentered (since NVIC still sees the interrupt source asserted). +//! +//! \return None. +// +//***************************************************************************** +void +PWMFaultIntClearExt(unsigned long ulBase, unsigned long ulFaultInts) +{ + // + // Check the arguments. + // + ASSERT(ulBase == PWM_BASE); + ASSERT((ulFaultInts & ~(PWM_INT_FAULT0 | PWM_INT_FAULT1 | + PWM_INT_FAULT2 | PWM_INT_FAULT3)) == 0); + + // + // Clear the supplied fault bits. + // + HWREG(ulBase + PWM_O_ISC) = ulFaultInts; +} + +//***************************************************************************** +// +//! Configures the minimum fault period and fault pin senses for a given +//! PWM generator. +//! +//! \param ulBase is the base address of the PWM module. +//! \param ulGen is the PWM generator whose fault configuration is being set. +//! Must be one of \b PWM_GEN_0, \b PWM_GEN_1, \b PWM_GEN_2, or \b PWM_GEN_3. +//! \param ulMinFaultPeriod is the minimum fault active period expressed in +//! PWM clock cycles. +//! \param ulFaultSenses indicates which sense of each FAULT input should be +//! considered the ``asserted'' state. Valid values are logical OR +//! combinations of \b PWM_FAULTn_SENSE_HIGH and \b PWM_FAULTn_SENSE_LOW. +//! +//! This function sets the minimum fault period for a given generator along +//! with the sense of each of the 4 possible fault inputs. The minimum fault +//! period is expressed in PWM clock cycles and takes effect only if +//! PWMGenConfigure() is called with flag \b PWM_GEN_MODE_FAULT_PER set in the +//! \e ulConfig parameter. When a fault input is asserted, the minimum fault +//! period timer ensures that it remains asserted for at least the number of +//! clock cycles specified. +//! +//! \note This function is only available on devices supporting extended PWM +//! fault handling. +//! +//! \return None. +// +//***************************************************************************** +void +PWMGenFaultConfigure(unsigned long ulBase, unsigned long ulGen, + unsigned long ulMinFaultPeriod, + unsigned long ulFaultSenses) +{ + // + // Check the arguments. + // + ASSERT(HWREG(SYSCTL_DC5) & SYSCTL_DC5_PWMEFLT); + ASSERT(ulBase == PWM_BASE); + ASSERT(PWMGenValid(ulGen)); + ASSERT(ulMinFaultPeriod < PWM_X_MINFLTPER_M); + ASSERT((ulFaultSenses & ~(PWM_FAULT0_SENSE_HIGH | PWM_FAULT0_SENSE_LOW | + PWM_FAULT1_SENSE_HIGH | PWM_FAULT1_SENSE_LOW | + PWM_FAULT2_SENSE_HIGH | PWM_FAULT2_SENSE_LOW | + PWM_FAULT3_SENSE_HIGH | PWM_FAULT3_SENSE_LOW)) == + 0); + + // + // Write the minimum fault period. + // + HWREG(PWM_GEN_BADDR(ulBase, ulGen) + PWM_O_X_MINFLTPER) = ulMinFaultPeriod; + + // + // Write the fault senses. + // + HWREG(PWM_GEN_EXT_BADDR(ulBase, ulGen) + PWM_O_X_FLTSEN) = ulFaultSenses; +} + +//***************************************************************************** +// +//! Configures the set of fault triggers for a given PWM generator. +//! +//! \param ulBase is the base address of the PWM module. +//! \param ulGen is the PWM generator whose fault triggers are being set. Must +//! be one of \b PWM_GEN_0, \b PWM_GEN_1, \b PWM_GEN_2, or \b PWM_GEN_3. +//! \param ulGroup indicates the subset of possible faults that are to be +//! configured. This must be \b PWM_FAULT_GROUP_0 or \b PWM_FAULT_GROUP_1. +//! \param ulFaultTriggers defines the set of inputs that are to contribute +//! towards generation of the fault signal to the given PWM generator. For +//! \b PWM_FAULT_GROUP_0, this will be the logical OR of \b PWM_FAULT_FAULT0, +//! \b PWM_FAULT_FAULT1, \b PWM_FAULT_FAULT2, or \b PWM_FAULT_FAULT3. For +//! \b PWM_FAULT_GROUP_1, this will be the logical OR of \b PWM_FAULT_DCMP0, +//! \b PWM_FAULT_DCMP1, \b PWM_FAULT_DCMP2, \b PWM_FAULT_DCMP3, \b +//! PWM_FAULT_DCMP4, \b PWM_FAULT_DCMP5, \b PWM_FAULT_DCMP6, or \b +//! PWM_FAULT_DCMP7. +//! +//! This function allows selection of the set of fault inputs that will be +//! combined to generate a fault condition to a given PWM generator. By +//! default, all generators use only FAULT0 (for backwards compatibility) but +//! if PWMGenConfigure() is called with flag \b PWM_GEN_MODE_FAULT_SRC in the +//! \e ulConfig parameter, extended fault handling is enabled and this function +//! must be called to configure the fault triggers. +//! +//! The fault signal to the PWM generator is generated by ORing together each +//! of the signals whose inputs are specified in the \e ulFaultTriggers +//! parameter after having adjusted the sense of each FAULTn input based on the +//! configuration previously set using a call to PWMGenFaultConfigure(). +//! +//! \note This function is only available on devices supporting extended PWM +//! fault handling. +//! +//! \return None. +// +//***************************************************************************** +void +PWMGenFaultTriggerSet(unsigned long ulBase, unsigned long ulGen, + unsigned long ulGroup, unsigned long ulFaultTriggers) +{ + // + // Check for valid parameters. + // + ASSERT(HWREG(SYSCTL_DC5) & SYSCTL_DC5_PWMEFLT); + ASSERT(ulBase == PWM_BASE); + ASSERT(PWMGenValid(ulGen)); + ASSERT((ulGroup == PWM_FAULT_GROUP_0) || (ulGroup == PWM_FAULT_GROUP_1)); + ASSERT((ulGroup == PWM_FAULT_GROUP_0) && + ((ulFaultTriggers & ~(PWM_FAULT_FAULT0 | PWM_FAULT_FAULT1 | + PWM_FAULT_FAULT2 | PWM_FAULT_FAULT3)) == 0)); + ASSERT((ulGroup == PWM_FAULT_GROUP_1) && + ((ulFaultTriggers & ~(PWM_FAULT_DCMP0 | PWM_FAULT_DCMP1 | + PWM_FAULT_DCMP2 | PWM_FAULT_DCMP3 | + PWM_FAULT_DCMP4 | PWM_FAULT_DCMP5 | + PWM_FAULT_DCMP6 | PWM_FAULT_DCMP7)) == 0)); + + // + // Write the fault triggers to the appropriate register. + // + if(ulGroup == PWM_FAULT_GROUP_0) + { + HWREG(PWM_GEN_BADDR(ulBase, ulGen) + PWM_O_X_FLTSRC0) = + ulFaultTriggers; + } + else + { + HWREG(PWM_GEN_BADDR(ulBase, ulGen) + PWM_O_X_FLTSRC1) = + ulFaultTriggers; + } +} + +//***************************************************************************** +// +//! Returns the set of fault triggers currently configured for a given PWM +//! generator. +//! +//! \param ulBase is the base address of the PWM module. +//! \param ulGen is the PWM generator whose fault triggers are being queried. +//! Must be one of \b PWM_GEN_0, \b PWM_GEN_1, \b PWM_GEN_2, or \b PWM_GEN_3. +//! \param ulGroup indicates the subset of faults that are being queried. This +//! must be \b PWM_FAULT_GROUP_0 or \b PWM_FAULT_GROUP_1. +//! +//! This function allows an application to query the current set of inputs that +//! contribute towards the generation of a fault condition to a given PWM +//! generator. +//! +//! \note This function is only available on devices supporting extended PWM +//! fault handling. +//! +//! \return Returns the current fault triggers configured for the fault group +//! provided. For \b PWM_FAULT_GROUP_0, the returned value will be a logical +//! OR of \b PWM_FAULT_FAULT0, \b PWM_FAULT_FAULT1, \b PWM_FAULT_FAULT2, or +//! \b PWM_FAULT_FAULT3. For \b PWM_FAULT_GROUP_1, the return value will be +//! the logical OR of \b PWM_FAULT_DCMP0, \b PWM_FAULT_DCMP1, \b +//! PWM_FAULT_DCMP2, \b PWM_FAULT_DCMP3, \b PWM_FAULT_DCMP4, \b PWM_FAULT_DCMP5, +//! \b PWM_FAULT_DCMP6, or \b PWM_FAULT_DCMP7. +// +//***************************************************************************** +unsigned long +PWMGenFaultTriggerGet(unsigned long ulBase, unsigned long ulGen, + unsigned long ulGroup) +{ + // + // Check for valid parameters. + // + ASSERT(HWREG(SYSCTL_DC5) & SYSCTL_DC5_PWMEFLT); + ASSERT(ulBase == PWM_BASE); + ASSERT(PWMGenValid(ulGen)); + ASSERT((ulGroup == PWM_FAULT_GROUP_0) || (ulGroup == PWM_FAULT_GROUP_1)); + + // + // Return the current fault triggers. + // + if(ulGroup == PWM_FAULT_GROUP_0) + { + return(HWREG(PWM_GEN_BADDR(ulBase, ulGen) + PWM_O_X_FLTSRC0)); + } + else + { + return(HWREG(PWM_GEN_BADDR(ulBase, ulGen) + PWM_O_X_FLTSRC1)); + } +} + +//***************************************************************************** +// +//! Returns the current state of the fault triggers for a given PWM generator. +//! +//! \param ulBase is the base address of the PWM module. +//! \param ulGen is the PWM generator whose fault trigger states are being +//! queried. Must be one of \b PWM_GEN_0, \b PWM_GEN_1, \b PWM_GEN_2, or +//! \b PWM_GEN_3. +//! \param ulGroup indicates the subset of faults that are being queried. This +//! must be \b PWM_FAULT_GROUP_0 or \b PWM_FAULT_GROUP_1. +//! +//! This function allows an application to query the current state of each of +//! the fault trigger inputs to a given PWM generator. The current state of +//! each fault trigger input is returned unless PWMGenConfigure() has +//! previously been called with flag \b PWM_GEN_MODE_LATCH_FAULT in the +//! \e ulConfig parameter in which case the returned status is the latched +//! fault trigger status. +//! +//! If latched faults are configured, the application must call +//! PWMGenFaultClear() to clear each trigger. +//! +//! \note This function is only available on devices supporting extended PWM +//! fault handling. +//! +//! \return Returns the current state of the fault triggers for the given PWM +//! generator. A set bit indicates that the associated trigger is active. For +//! \b PWM_FAULT_GROUP_0, the returned value will be a logical OR of +//! \b PWM_FAULT_FAULT0, \b PWM_FAULT_FAULT1, \b PWM_FAULT_FAULT2, or +//! \b PWM_FAULT_FAULT3. For \b PWM_FAULT_GROUP_1, the return value will be +//! the logical OR of \b PWM_FAULT_DCMP0, \b PWM_FAULT_DCMP1, \b +//! PWM_FAULT_DCMP2, \b PWM_FAULT_DCMP3, \b PWM_FAULT_DCMP4, \b PWM_FAULT_DCMP5, +//! \b PWM_FAULT_DCMP6, or \b PWM_FAULT_DCMP7. +// +//***************************************************************************** +unsigned long +PWMGenFaultStatus(unsigned long ulBase, unsigned long ulGen, + unsigned long ulGroup) +{ + // + // Check for valid parameters. + // + ASSERT(HWREG(SYSCTL_DC5) & SYSCTL_DC5_PWMEFLT); + ASSERT(ulBase == PWM_BASE); + ASSERT(PWMGenValid(ulGen)); + ASSERT((ulGroup == PWM_FAULT_GROUP_0) || (ulGroup == PWM_FAULT_GROUP_1)); + + // + // Return the current fault status. + // + if(ulGroup == PWM_FAULT_GROUP_0) + { + return(HWREG(PWM_GEN_EXT_BADDR(ulBase, ulGen) + PWM_O_X_FLTSTAT0)); + } + else + { + return(HWREG(PWM_GEN_EXT_BADDR(ulBase, ulGen) + PWM_O_X_FLTSTAT1)); + } +} + +//***************************************************************************** +// +//! Clears one or more latched fault triggers for a given PWM generator. +//! +//! \param ulBase is the base address of the PWM module. +//! \param ulGen is the PWM generator whose fault trigger states are being +//! queried. Must be one of \b PWM_GEN_0, \b PWM_GEN_1, \b PWM_GEN_2, or +//! \b PWM_GEN_3. +//! \param ulGroup indicates the subset of faults that are being queried. This +//! must be \b PWM_FAULT_GROUP_0 or \b PWM_FAULT_GROUP_1. +//! \param ulFaultTriggers is the set of fault triggers which are to be +//! cleared. +//! +//! This function allows an application to clear the fault triggers for a given +//! PWM generator. This is only required if PWMGenConfigure() has previously +//! been called with flag \b PWM_GEN_MODE_LATCH_FAULT in parameter \e ulConfig. +//! +//! \note This function is only available on devices supporting extended PWM +//! fault handling. +//! +//! \return None. +// +//***************************************************************************** +void +PWMGenFaultClear(unsigned long ulBase, unsigned long ulGen, + unsigned long ulGroup, unsigned long ulFaultTriggers) +{ + // + // Check for valid parameters. + // + ASSERT(HWREG(SYSCTL_DC5) & SYSCTL_DC5_PWMEFLT); + ASSERT(ulBase == PWM_BASE); + ASSERT(PWMGenValid(ulGen)); + ASSERT((ulGroup == PWM_FAULT_GROUP_0) || (ulGroup == PWM_FAULT_GROUP_1)); + ASSERT((ulGroup == PWM_FAULT_GROUP_0) && + ((ulFaultTriggers & ~(PWM_FAULT_FAULT0 | PWM_FAULT_FAULT1 | + PWM_FAULT_FAULT2 | PWM_FAULT_FAULT3)) == 0)); + ASSERT((ulGroup == PWM_FAULT_GROUP_1) && + ((ulFaultTriggers & ~(PWM_FAULT_DCMP0 | PWM_FAULT_DCMP1 | + PWM_FAULT_DCMP2 | PWM_FAULT_DCMP3 | + PWM_FAULT_DCMP4 | PWM_FAULT_DCMP5 | + PWM_FAULT_DCMP6 | PWM_FAULT_DCMP7)) == 0)); + + // + // Clear the given faults. + // + if(ulGroup == PWM_FAULT_GROUP_0) + { + HWREG(PWM_GEN_EXT_BADDR(ulBase, ulGen) + PWM_O_X_FLTSTAT0) = + ulFaultTriggers; + } + else + { + HWREG(PWM_GEN_EXT_BADDR(ulBase, ulGen) + PWM_O_X_FLTSTAT1) = + ulFaultTriggers; + } +} + +//***************************************************************************** +// +// Close the Doxygen group. +//! @} +// +//***************************************************************************** diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/pwm.h b/bsp/lm3s_9b9x/Libraries/driverlib/pwm.h new file mode 100644 index 0000000000000000000000000000000000000000..9714bff935614be2821fb79ff73ad4f1fee955fe --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/pwm.h @@ -0,0 +1,283 @@ +//***************************************************************************** +// +// pwm.h - API function protoypes for Pulse Width Modulation (PWM) ports +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +#ifndef __PWM_H__ +#define __PWM_H__ + +//***************************************************************************** +// +// If building with a C++ compiler, make all of the definitions in this header +// have a C binding. +// +//***************************************************************************** +#ifdef __cplusplus +extern "C" +{ +#endif + +//***************************************************************************** +// +// The following defines are passed to PWMGenConfigure() as the ulConfig +// parameter and specify the configuration of the PWM generator. +// +//***************************************************************************** +#define PWM_GEN_MODE_DOWN 0x00000000 // Down count mode +#define PWM_GEN_MODE_UP_DOWN 0x00000002 // Up/Down count mode +#define PWM_GEN_MODE_SYNC 0x00000038 // Synchronous updates +#define PWM_GEN_MODE_NO_SYNC 0x00000000 // Immediate updates +#define PWM_GEN_MODE_DBG_RUN 0x00000004 // Continue running in debug mode +#define PWM_GEN_MODE_DBG_STOP 0x00000000 // Stop running in debug mode +#define PWM_GEN_MODE_FAULT_LATCHED \ + 0x00040000 // Fault is latched +#define PWM_GEN_MODE_FAULT_UNLATCHED \ + 0x00000000 // Fault is not latched +#define PWM_GEN_MODE_FAULT_MINPER \ + 0x00020000 // Enable min fault period +#define PWM_GEN_MODE_FAULT_NO_MINPER \ + 0x00000000 // Disable min fault period +#define PWM_GEN_MODE_FAULT_EXT 0x00010000 // Enable extended fault support +#define PWM_GEN_MODE_FAULT_LEGACY \ + 0x00000000 // Disable extended fault support +#define PWM_GEN_MODE_DB_NO_SYNC 0x00000000 // Deadband updates occur + // immediately +#define PWM_GEN_MODE_DB_SYNC_LOCAL \ + 0x0000A800 // Deadband updates locally + // synchronized +#define PWM_GEN_MODE_DB_SYNC_GLOBAL \ + 0x0000FC00 // Deadband updates globally + // synchronized +#define PWM_GEN_MODE_GEN_NO_SYNC \ + 0x00000000 // Generator mode updates occur + // immediately +#define PWM_GEN_MODE_GEN_SYNC_LOCAL \ + 0x00000280 // Generator mode updates locally + // synchronized +#define PWM_GEN_MODE_GEN_SYNC_GLOBAL \ + 0x000003C0 // Generator mode updates globally + // synchronized + +//***************************************************************************** +// +// Defines for enabling, disabling, and clearing PWM generator interrupts and +// triggers. +// +//***************************************************************************** +#define PWM_INT_CNT_ZERO 0x00000001 // Int if COUNT = 0 +#define PWM_INT_CNT_LOAD 0x00000002 // Int if COUNT = LOAD +#define PWM_INT_CNT_AU 0x00000004 // Int if COUNT = CMPA U +#define PWM_INT_CNT_AD 0x00000008 // Int if COUNT = CMPA D +#define PWM_INT_CNT_BU 0x00000010 // Int if COUNT = CMPA U +#define PWM_INT_CNT_BD 0x00000020 // Int if COUNT = CMPA D +#define PWM_TR_CNT_ZERO 0x00000100 // Trig if COUNT = 0 +#define PWM_TR_CNT_LOAD 0x00000200 // Trig if COUNT = LOAD +#define PWM_TR_CNT_AU 0x00000400 // Trig if COUNT = CMPA U +#define PWM_TR_CNT_AD 0x00000800 // Trig if COUNT = CMPA D +#define PWM_TR_CNT_BU 0x00001000 // Trig if COUNT = CMPA U +#define PWM_TR_CNT_BD 0x00002000 // Trig if COUNT = CMPA D + +//***************************************************************************** +// +// Defines for enabling, disabling, and clearing PWM interrupts. +// +//***************************************************************************** +#define PWM_INT_GEN_0 0x00000001 // Generator 0 interrupt +#define PWM_INT_GEN_1 0x00000002 // Generator 1 interrupt +#define PWM_INT_GEN_2 0x00000004 // Generator 2 interrupt +#define PWM_INT_GEN_3 0x00000008 // Generator 3 interrupt +#ifndef DEPRECATED +#define PWM_INT_FAULT 0x00010000 // Fault interrupt +#endif +#define PWM_INT_FAULT0 0x00010000 // Fault0 interrupt +#define PWM_INT_FAULT1 0x00020000 // Fault1 interrupt +#define PWM_INT_FAULT2 0x00040000 // Fault2 interrupt +#define PWM_INT_FAULT3 0x00080000 // Fault3 interrupt +#define PWM_INT_FAULT_M 0x000F0000 // Fault interrupt source mask + +//***************************************************************************** +// +// Defines to identify the generators within a module. +// +//***************************************************************************** +#define PWM_GEN_0 0x00000040 // Offset address of Gen0 +#define PWM_GEN_1 0x00000080 // Offset address of Gen1 +#define PWM_GEN_2 0x000000C0 // Offset address of Gen2 +#define PWM_GEN_3 0x00000100 // Offset address of Gen3 + +#define PWM_GEN_0_BIT 0x00000001 // Bit-wise ID for Gen0 +#define PWM_GEN_1_BIT 0x00000002 // Bit-wise ID for Gen1 +#define PWM_GEN_2_BIT 0x00000004 // Bit-wise ID for Gen2 +#define PWM_GEN_3_BIT 0x00000008 // Bit-wise ID for Gen3 + +#define PWM_GEN_EXT_0 0x00000800 // Offset of Gen0 ext address range +#define PWM_GEN_EXT_1 0x00000880 // Offset of Gen1 ext address range +#define PWM_GEN_EXT_2 0x00000900 // Offset of Gen2 ext address range +#define PWM_GEN_EXT_3 0x00000980 // Offset of Gen3 ext address range + +//***************************************************************************** +// +// Defines to identify the outputs within a module. +// +//***************************************************************************** +#define PWM_OUT_0 0x00000040 // Encoded offset address of PWM0 +#define PWM_OUT_1 0x00000041 // Encoded offset address of PWM1 +#define PWM_OUT_2 0x00000082 // Encoded offset address of PWM2 +#define PWM_OUT_3 0x00000083 // Encoded offset address of PWM3 +#define PWM_OUT_4 0x000000C4 // Encoded offset address of PWM4 +#define PWM_OUT_5 0x000000C5 // Encoded offset address of PWM5 +#define PWM_OUT_6 0x00000106 // Encoded offset address of PWM6 +#define PWM_OUT_7 0x00000107 // Encoded offset address of PWM7 + +#define PWM_OUT_0_BIT 0x00000001 // Bit-wise ID for PWM0 +#define PWM_OUT_1_BIT 0x00000002 // Bit-wise ID for PWM1 +#define PWM_OUT_2_BIT 0x00000004 // Bit-wise ID for PWM2 +#define PWM_OUT_3_BIT 0x00000008 // Bit-wise ID for PWM3 +#define PWM_OUT_4_BIT 0x00000010 // Bit-wise ID for PWM4 +#define PWM_OUT_5_BIT 0x00000020 // Bit-wise ID for PWM5 +#define PWM_OUT_6_BIT 0x00000040 // Bit-wise ID for PWM6 +#define PWM_OUT_7_BIT 0x00000080 // Bit-wise ID for PWM7 + +//***************************************************************************** +// +// Defines to identify each of the possible fault trigger conditions in +// PWM_FAULT_GROUP_0. +// +//***************************************************************************** +#define PWM_FAULT_GROUP_0 0 + +#define PWM_FAULT_FAULT0 0x00000001 +#define PWM_FAULT_FAULT1 0x00000002 +#define PWM_FAULT_FAULT2 0x00000004 +#define PWM_FAULT_FAULT3 0x00000008 +#define PWM_FAULT_ACMP0 0x00010000 +#define PWM_FAULT_ACMP1 0x00020000 +#define PWM_FAULT_ACMP2 0x00040000 + +//***************************************************************************** +// +// Defines to identify each of the possible fault trigger conditions in +// PWM_FAULT_GROUP_1. +// +//***************************************************************************** +#define PWM_FAULT_GROUP_1 1 + +#define PWM_FAULT_DCMP0 0x00000001 +#define PWM_FAULT_DCMP1 0x00000002 +#define PWM_FAULT_DCMP2 0x00000004 +#define PWM_FAULT_DCMP3 0x00000008 +#define PWM_FAULT_DCMP4 0x00000010 +#define PWM_FAULT_DCMP5 0x00000020 +#define PWM_FAULT_DCMP6 0x00000040 +#define PWM_FAULT_DCMP7 0x00000080 + +//***************************************************************************** +// +// Defines to identify the sense of each of the external FAULTn signals +// +//***************************************************************************** +#define PWM_FAULT0_SENSE_HIGH 0x00000000 +#define PWM_FAULT0_SENSE_LOW 0x00000001 +#define PWM_FAULT1_SENSE_HIGH 0x00000000 +#define PWM_FAULT1_SENSE_LOW 0x00000002 +#define PWM_FAULT2_SENSE_HIGH 0x00000000 +#define PWM_FAULT2_SENSE_LOW 0x00000004 +#define PWM_FAULT3_SENSE_HIGH 0x00000000 +#define PWM_FAULT3_SENSE_LOW 0x00000008 + +//***************************************************************************** +// +// API Function prototypes +// +//***************************************************************************** +extern void PWMGenConfigure(unsigned long ulBase, unsigned long ulGen, + unsigned long ulConfig); +extern void PWMGenPeriodSet(unsigned long ulBase, unsigned long ulGen, + unsigned long ulPeriod); +extern unsigned long PWMGenPeriodGet(unsigned long ulBase, + unsigned long ulGen); +extern void PWMGenEnable(unsigned long ulBase, unsigned long ulGen); +extern void PWMGenDisable(unsigned long ulBase, unsigned long ulGen); +extern void PWMPulseWidthSet(unsigned long ulBase, unsigned long ulPWMOut, + unsigned long ulWidth); +extern unsigned long PWMPulseWidthGet(unsigned long ulBase, + unsigned long ulPWMOut); +extern void PWMDeadBandEnable(unsigned long ulBase, unsigned long ulGen, + unsigned short usRise, unsigned short usFall); +extern void PWMDeadBandDisable(unsigned long ulBase, unsigned long ulGen); +extern void PWMSyncUpdate(unsigned long ulBase, unsigned long ulGenBits); +extern void PWMSyncTimeBase(unsigned long ulBase, unsigned long ulGenBits); +extern void PWMOutputState(unsigned long ulBase, unsigned long ulPWMOutBits, + tBoolean bEnable); +extern void PWMOutputInvert(unsigned long ulBase, unsigned long ulPWMOutBits, + tBoolean bInvert); +extern void PWMOutputFaultLevel(unsigned long ulBase, + unsigned long ulPWMOutBits, + tBoolean bDriveHigh); +extern void PWMOutputFault(unsigned long ulBase, unsigned long ulPWMOutBits, + tBoolean bFaultSuppress); +extern void PWMGenIntRegister(unsigned long ulBase, unsigned long ulGen, + void (*pfnIntHandler)(void)); +extern void PWMGenIntUnregister(unsigned long ulBase, unsigned long ulGen); +extern void PWMFaultIntRegister(unsigned long ulBase, + void (*pfnIntHandler)(void)); +extern void PWMFaultIntUnregister(unsigned long ulBase); +extern void PWMGenIntTrigEnable(unsigned long ulBase, unsigned long ulGen, + unsigned long ulIntTrig); +extern void PWMGenIntTrigDisable(unsigned long ulBase, unsigned long ulGen, + unsigned long ulIntTrig); +extern unsigned long PWMGenIntStatus(unsigned long ulBase, unsigned long ulGen, + tBoolean bMasked); +extern void PWMGenIntClear(unsigned long ulBase, unsigned long ulGen, + unsigned long ulInts); +extern void PWMIntEnable(unsigned long ulBase, unsigned long ulGenFault); +extern void PWMIntDisable(unsigned long ulBase, unsigned long ulGenFault); +extern void PWMFaultIntClear(unsigned long ulBase); +extern unsigned long PWMIntStatus(unsigned long ulBase, tBoolean bMasked); +extern void PWMFaultIntClearExt(unsigned long ulBase, + unsigned long ulFaultInts); +extern void PWMGenFaultConfigure(unsigned long ulBase, unsigned long ulGen, + unsigned long ulMinFaultPeriod, + unsigned long ulFaultSenses); +extern void PWMGenFaultTriggerSet(unsigned long ulBase, unsigned long ulGen, + unsigned long ulGroup, + unsigned long ulFaultTriggers); +extern unsigned long PWMGenFaultTriggerGet(unsigned long ulBase, + unsigned long ulGen, + unsigned long ulGroup); +extern unsigned long PWMGenFaultStatus(unsigned long ulBase, + unsigned long ulGen, + unsigned long ulGroup); +extern void PWMGenFaultClear(unsigned long ulBase, unsigned long ulGen, + unsigned long ulGroup, + unsigned long ulFaultTriggers); + +//***************************************************************************** +// +// Mark the end of the C bindings section for C++ compilers. +// +//***************************************************************************** +#ifdef __cplusplus +} +#endif + +#endif // __PWM_H__ diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/qei.c b/bsp/lm3s_9b9x/Libraries/driverlib/qei.c new file mode 100644 index 0000000000000000000000000000000000000000..956fce3283569c3dc2190c1ac3c2cb6bc63dfa1d --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/qei.c @@ -0,0 +1,616 @@ +//***************************************************************************** +// +// qei.c - Driver for the Quadrature Encoder with Index. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +//***************************************************************************** +// +//! \addtogroup qei_api +//! @{ +// +//***************************************************************************** + +#include "inc/hw_ints.h" +#include "inc/hw_memmap.h" +#include "inc/hw_qei.h" +#include "inc/hw_types.h" +#include "driverlib/debug.h" +#include "driverlib/interrupt.h" +#include "driverlib/qei.h" + +//***************************************************************************** +// +//! Enables the quadrature encoder. +//! +//! \param ulBase is the base address of the quadrature encoder module. +//! +//! This will enable operation of the quadrature encoder module. It must be +//! configured before it is enabled. +//! +//! \sa QEIConfigure() +//! +//! \return None. +// +//***************************************************************************** +void +QEIEnable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == QEI0_BASE) || (ulBase == QEI1_BASE)); + + // + // Enable the QEI module. + // + HWREG(ulBase + QEI_O_CTL) |= QEI_CTL_ENABLE; +} + +//***************************************************************************** +// +//! Disables the quadrature encoder. +//! +//! \param ulBase is the base address of the quadrature encoder module. +//! +//! This will disable operation of the quadrature encoder module. +//! +//! \return None. +// +//***************************************************************************** +void +QEIDisable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == QEI0_BASE) || (ulBase == QEI1_BASE)); + + // + // Disable the QEI module. + // + HWREG(ulBase + QEI_O_CTL) &= ~(QEI_CTL_ENABLE); +} + +//***************************************************************************** +// +//! Configures the quadrature encoder. +//! +//! \param ulBase is the base address of the quadrature encoder module. +//! \param ulConfig is the configuration for the quadrature encoder. See below +//! for a description of this parameter. +//! \param ulMaxPosition specifies the maximum position value. +//! +//! This will configure the operation of the quadrature encoder. The +//! \e ulConfig parameter provides the configuration of the encoder and is the +//! logical OR of several values: +//! +//! - \b QEI_CONFIG_CAPTURE_A or \b QEI_CONFIG_CAPTURE_A_B to specify if edges +//! on channel A or on both channels A and B should be counted by the +//! position integrator and velocity accumulator. +//! - \b QEI_CONFIG_NO_RESET or \b QEI_CONFIG_RESET_IDX to specify if the +//! position integrator should be reset when the index pulse is detected. +//! - \b QEI_CONFIG_QUADRATURE or \b QEI_CONFIG_CLOCK_DIR to specify if +//! quadrature signals are being provided on ChA and ChB, or if a direction +//! signal and a clock are being provided instead. +//! - \b QEI_CONFIG_NO_SWAP or \b QEI_CONFIG_SWAP to specify if the signals +//! provided on ChA and ChB should be swapped before being processed. +//! +//! \e ulMaxPosition is the maximum value of the position integrator, and is +//! the value used to reset the position capture when in index reset mode and +//! moving in the reverse (negative) direction. +//! +//! \return None. +// +//***************************************************************************** +void +QEIConfigure(unsigned long ulBase, unsigned long ulConfig, + unsigned long ulMaxPosition) +{ + // + // Check the arguments. + // + ASSERT((ulBase == QEI0_BASE) || (ulBase == QEI1_BASE)); + + // + // Write the new configuration to the hardware. + // + HWREG(ulBase + QEI_O_CTL) = ((HWREG(ulBase + QEI_O_CTL) & + ~(QEI_CTL_CAPMODE | QEI_CTL_RESMODE | + QEI_CTL_SIGMODE | QEI_CTL_SWAP)) | + ulConfig); + + // + // Set the maximum position. + // + HWREG(ulBase + QEI_O_MAXPOS) = ulMaxPosition; +} + +//***************************************************************************** +// +//! Gets the current encoder position. +//! +//! \param ulBase is the base address of the quadrature encoder module. +//! +//! This returns the current position of the encoder. Depending upon the +//! configuration of the encoder, and the incident of an index pulse, this +//! value may or may not contain the expected data (that is, if in reset on +//! index mode, if an index pulse has not been encountered, the position +//! counter will not be aligned with the index pulse yet). +//! +//! \return The current position of the encoder. +// +//***************************************************************************** +unsigned long +QEIPositionGet(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == QEI0_BASE) || (ulBase == QEI1_BASE)); + + // + // Return the current position counter. + // + return(HWREG(ulBase + QEI_O_POS)); +} + +//***************************************************************************** +// +//! Sets the current encoder position. +//! +//! \param ulBase is the base address of the quadrature encoder module. +//! \param ulPosition is the new position for the encoder. +//! +//! This sets the current position of the encoder; the encoder position will +//! then be measured relative to this value. +//! +//! \return None. +// +//***************************************************************************** +void +QEIPositionSet(unsigned long ulBase, unsigned long ulPosition) +{ + // + // Check the arguments. + // + ASSERT((ulBase == QEI0_BASE) || (ulBase == QEI1_BASE)); + + // + // Set the position counter. + // + HWREG(ulBase + QEI_O_POS) = ulPosition; +} + +//***************************************************************************** +// +//! Gets the current direction of rotation. +//! +//! \param ulBase is the base address of the quadrature encoder module. +//! +//! This returns the current direction of rotation. In this case, current +//! means the most recently detected direction of the encoder; it may not be +//! presently moving but this is the direction it last moved before it stopped. +//! +//! \return Returns 1 if moving in the forward direction or -1 if moving in the +//! reverse direction. +// +//***************************************************************************** +long +QEIDirectionGet(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == QEI0_BASE) || (ulBase == QEI1_BASE)); + + // + // Return the direction of rotation. + // + return((HWREG(ulBase + QEI_O_STAT) & QEI_STAT_DIRECTION) ? -1 : 1); +} + +//***************************************************************************** +// +//! Gets the encoder error indicator. +//! +//! \param ulBase is the base address of the quadrature encoder module. +//! +//! This returns the error indicator for the quadrature encoder. It is an +//! error for both of the signals of the quadrature input to change at the same +//! time. +//! +//! \return Returns \b true if an error has occurred and \b false otherwise. +// +//***************************************************************************** +tBoolean +QEIErrorGet(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == QEI0_BASE) || (ulBase == QEI1_BASE)); + + // + // Return the error indicator. + // + return((HWREG(ulBase + QEI_O_STAT) & QEI_STAT_ERROR) ? true : false); +} + +//***************************************************************************** +// +//! Enables the velocity capture. +//! +//! \param ulBase is the base address of the quadrature encoder module. +//! +//! This will enable operation of the velocity capture in the quadrature +//! encoder module. It must be configured before it is enabled. Velocity +//! capture will not occur if the quadrature encoder is not enabled. +//! +//! \sa QEIVelocityConfigure() and QEIEnable() +//! +//! \return None. +// +//***************************************************************************** +void +QEIVelocityEnable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == QEI0_BASE) || (ulBase == QEI1_BASE)); + + // + // Enable the velocity capture. + // + HWREG(ulBase + QEI_O_CTL) |= QEI_CTL_VELEN; +} + +//***************************************************************************** +// +//! Disables the velocity capture. +//! +//! \param ulBase is the base address of the quadrature encoder module. +//! +//! This will disable operation of the velocity capture in the quadrature +//! encoder module. +//! +//! \return None. +// +//***************************************************************************** +void +QEIVelocityDisable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == QEI0_BASE) || (ulBase == QEI1_BASE)); + + // + // Disable the velocity capture. + // + HWREG(ulBase + QEI_O_CTL) &= ~(QEI_CTL_VELEN); +} + +//***************************************************************************** +// +//! Configures the velocity capture. +//! +//! \param ulBase is the base address of the quadrature encoder module. +//! \param ulPreDiv specifies the predivider applied to the input quadrature +//! signal before it is counted; can be one of \b QEI_VELDIV_1, +//! \b QEI_VELDIV_2, \b QEI_VELDIV_4, \b QEI_VELDIV_8, \b QEI_VELDIV_16, +//! \b QEI_VELDIV_32, \b QEI_VELDIV_64, or \b QEI_VELDIV_128. +//! \param ulPeriod specifies the number of clock ticks over which to measure +//! the velocity; must be non-zero. +//! +//! This will configure the operation of the velocity capture portion of the +//! quadrature encoder. The position increment signal is predivided as +//! specified by \e ulPreDiv before being accumulated by the velocity capture. +//! The divided signal is accumulated over \e ulPeriod system clock before +//! being saved and resetting the accumulator. +//! +//! \return None. +// +//***************************************************************************** +void +QEIVelocityConfigure(unsigned long ulBase, unsigned long ulPreDiv, + unsigned long ulPeriod) +{ + // + // Check the arguments. + // + ASSERT((ulBase == QEI0_BASE) || (ulBase == QEI1_BASE)); + ASSERT(!(ulPreDiv & ~(QEI_CTL_VELDIV_M))); + ASSERT(ulPeriod != 0); + + // + // Set the velocity predivider. + // + HWREG(ulBase + QEI_O_CTL) = ((HWREG(ulBase + QEI_O_CTL) & + ~(QEI_CTL_VELDIV_M)) | ulPreDiv); + + // + // Set the timer period. + // + HWREG(ulBase + QEI_O_LOAD) = ulPeriod - 1; +} + +//***************************************************************************** +// +//! Gets the current encoder speed. +//! +//! \param ulBase is the base address of the quadrature encoder module. +//! +//! This returns the current speed of the encoder. The value returned is the +//! number of pulses detected in the specified time period; this number can be +//! multiplied by the number of time periods per second and divided by the +//! number of pulses per revolution to obtain the number of revolutions per +//! second. +//! +//! \return Returns the number of pulses captured in the given time period. +// +//***************************************************************************** +unsigned long +QEIVelocityGet(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == QEI0_BASE) || (ulBase == QEI1_BASE)); + + // + // Return the speed capture value. + // + return(HWREG(ulBase + QEI_O_SPEED)); +} + +//***************************************************************************** +// +//! Registers an interrupt handler for the quadrature encoder interrupt. +//! +//! \param ulBase is the base address of the quadrature encoder module. +//! \param pfnHandler is a pointer to the function to be called when the +//! quadrature encoder interrupt occurs. +//! +//! This sets the handler to be called when a quadrature encoder interrupt +//! occurs. This will enable the global interrupt in the interrupt controller; +//! specific quadrature encoder interrupts must be enabled via QEIIntEnable(). +//! It is the interrupt handler's responsibility to clear the interrupt source +//! via QEIIntClear(). +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +QEIIntRegister(unsigned long ulBase, void (*pfnHandler)(void)) +{ + unsigned long ulInt; + + // + // Check the arguments. + // + ASSERT((ulBase == QEI0_BASE) || (ulBase == QEI1_BASE)); + + // + // Determine the interrupt number based on the QEI module. + // + ulInt = (ulBase == QEI0_BASE) ? INT_QEI0 : INT_QEI1; + + // + // Register the interrupt handler, returning an error if an error occurs. + // + IntRegister(ulInt, pfnHandler); + + // + // Enable the quadrature encoder interrupt. + // + IntEnable(ulInt); +} + +//***************************************************************************** +// +//! Unregisters an interrupt handler for the quadrature encoder interrupt. +//! +//! \param ulBase is the base address of the quadrature encoder module. +//! +//! This function will clear the handler to be called when a quadrature encoder +//! interrupt occurs. This will also mask off the interrupt in the interrupt +//! controller so that the interrupt handler no longer is called. +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +QEIIntUnregister(unsigned long ulBase) +{ + unsigned long ulInt; + + // + // Check the arguments. + // + ASSERT((ulBase == QEI0_BASE) || (ulBase == QEI1_BASE)); + + // + // Determine the interrupt number based on the QEI module. + // + ulInt = (ulBase == QEI0_BASE) ? INT_QEI0 : INT_QEI1; + + // + // Disable the interrupt. + // + IntDisable(ulInt); + + // + // Unregister the interrupt handler. + // + IntUnregister(ulInt); +} + +//***************************************************************************** +// +//! Enables individual quadrature encoder interrupt sources. +//! +//! \param ulBase is the base address of the quadrature encoder module. +//! \param ulIntFlags is a bit mask of the interrupt sources to be enabled. +//! Can be any of the \b QEI_INTERROR, \b QEI_INTDIR, \b QEI_INTTIMER, or +//! \b QEI_INTINDEX values. +//! +//! Enables the indicated quadrature encoder interrupt sources. Only the +//! sources that are enabled can be reflected to the processor interrupt; +//! disabled sources have no effect on the processor. +//! +//! \return None. +// +//***************************************************************************** +void +QEIIntEnable(unsigned long ulBase, unsigned long ulIntFlags) +{ + // + // Check the arguments. + // + ASSERT((ulBase == QEI0_BASE) || (ulBase == QEI1_BASE)); + + // + // Enable the specified interrupts. + // + HWREG(ulBase + QEI_O_INTEN) |= ulIntFlags; +} + +//***************************************************************************** +// +//! Disables individual quadrature encoder interrupt sources. +//! +//! \param ulBase is the base address of the quadrature encoder module. +//! \param ulIntFlags is a bit mask of the interrupt sources to be disabled. +//! Can be any of the \b QEI_INTERROR, \b QEI_INTDIR, \b QEI_INTTIMER, or +//! \b QEI_INTINDEX values. +//! +//! Disables the indicated quadrature encoder interrupt sources. Only the +//! sources that are enabled can be reflected to the processor interrupt; +//! disabled sources have no effect on the processor. +//! +//! \return None. +// +//***************************************************************************** +void +QEIIntDisable(unsigned long ulBase, unsigned long ulIntFlags) +{ + // + // Check the arguments. + // + ASSERT((ulBase == QEI0_BASE) || (ulBase == QEI1_BASE)); + + // + // Disable the specified interrupts. + // + HWREG(ulBase + QEI_O_INTEN) &= ~(ulIntFlags); +} + +//***************************************************************************** +// +//! Gets the current interrupt status. +//! +//! \param ulBase is the base address of the quadrature encoder module. +//! \param bMasked is false if the raw interrupt status is required and true if +//! the masked interrupt status is required. +//! +//! This returns the interrupt status for the quadrature encoder module. +//! Either the raw interrupt status or the status of interrupts that are +//! allowed to reflect to the processor can be returned. +//! +//! \return Returns the current interrupt status, enumerated as a bit field of +//! \b QEI_INTERROR, \b QEI_INTDIR, \b QEI_INTTIMER, and \b QEI_INTINDEX. +// +//***************************************************************************** +unsigned long +QEIIntStatus(unsigned long ulBase, tBoolean bMasked) +{ + // + // Check the arguments. + // + ASSERT((ulBase == QEI0_BASE) || (ulBase == QEI1_BASE)); + + // + // Return either the interrupt status or the raw interrupt status as + // requested. + // + if(bMasked) + { + return(HWREG(ulBase + QEI_O_ISC)); + } + else + { + return(HWREG(ulBase + QEI_O_RIS)); + } +} + +//***************************************************************************** +// +//! Clears quadrature encoder interrupt sources. +//! +//! \param ulBase is the base address of the quadrature encoder module. +//! \param ulIntFlags is a bit mask of the interrupt sources to be cleared. +//! Can be any of the \b QEI_INTERROR, \b QEI_INTDIR, \b QEI_INTTIMER, or +//! \b QEI_INTINDEX values. +//! +//! The specified quadrature encoder interrupt sources are cleared, so that +//! they no longer assert. This must be done in the interrupt handler to keep +//! it from being called again immediately upon exit. +//! +//! \note Since there is a write buffer in the Cortex-M3 processor, it may take +//! several clock cycles before the interrupt source is actually cleared. +//! Therefore, it is recommended that the interrupt source be cleared early in +//! the interrupt handler (as opposed to the very last action) to avoid +//! returning from the interrupt handler before the interrupt source is +//! actually cleared. Failure to do so may result in the interrupt handler +//! being immediately reentered (since NVIC still sees the interrupt source +//! asserted). +//! +//! \return None. +// +//***************************************************************************** +void +QEIIntClear(unsigned long ulBase, unsigned long ulIntFlags) +{ + // + // Check the arguments. + // + ASSERT((ulBase == QEI0_BASE) || (ulBase == QEI1_BASE)); + + // + // Clear the requested interrupt sources. + // + HWREG(ulBase + QEI_O_ISC) = ulIntFlags; +} + +//***************************************************************************** +// +// Close the Doxygen group. +//! @} +// +//***************************************************************************** diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/qei.h b/bsp/lm3s_9b9x/Libraries/driverlib/qei.h new file mode 100644 index 0000000000000000000000000000000000000000..3f20a6a6fa30f0bdd4dc001496acd89225356172 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/qei.h @@ -0,0 +1,112 @@ +//***************************************************************************** +// +// qei.h - Prototypes for the Quadrature Encoder Driver. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +#ifndef __QEI_H__ +#define __QEI_H__ + +//***************************************************************************** +// +// If building with a C++ compiler, make all of the definitions in this header +// have a C binding. +// +//***************************************************************************** +#ifdef __cplusplus +extern "C" +{ +#endif + +//***************************************************************************** +// +// Values that can be passed to QEIConfigure as the ulConfig paramater. +// +//***************************************************************************** +#define QEI_CONFIG_CAPTURE_A 0x00000000 // Count on ChA edges only +#define QEI_CONFIG_CAPTURE_A_B 0x00000008 // Count on ChA and ChB edges +#define QEI_CONFIG_NO_RESET 0x00000000 // Do not reset on index pulse +#define QEI_CONFIG_RESET_IDX 0x00000010 // Reset position on index pulse +#define QEI_CONFIG_QUADRATURE 0x00000000 // ChA and ChB are quadrature +#define QEI_CONFIG_CLOCK_DIR 0x00000004 // ChA and ChB are clock and dir +#define QEI_CONFIG_NO_SWAP 0x00000000 // Do not swap ChA and ChB +#define QEI_CONFIG_SWAP 0x00000002 // Swap ChA and ChB + +//***************************************************************************** +// +// Values that can be passed to QEIVelocityConfigure as the ulPreDiv parameter. +// +//***************************************************************************** +#define QEI_VELDIV_1 0x00000000 // Predivide by 1 +#define QEI_VELDIV_2 0x00000040 // Predivide by 2 +#define QEI_VELDIV_4 0x00000080 // Predivide by 4 +#define QEI_VELDIV_8 0x000000C0 // Predivide by 8 +#define QEI_VELDIV_16 0x00000100 // Predivide by 16 +#define QEI_VELDIV_32 0x00000140 // Predivide by 32 +#define QEI_VELDIV_64 0x00000180 // Predivide by 64 +#define QEI_VELDIV_128 0x000001C0 // Predivide by 128 + +//***************************************************************************** +// +// Values that can be passed to QEIEnableInts, QEIDisableInts, and QEIClearInts +// as the ulIntFlags parameter, and returned by QEIGetIntStatus. +// +//***************************************************************************** +#define QEI_INTERROR 0x00000008 // Phase error detected +#define QEI_INTDIR 0x00000004 // Direction change +#define QEI_INTTIMER 0x00000002 // Velocity timer expired +#define QEI_INTINDEX 0x00000001 // Index pulse detected + +//***************************************************************************** +// +// Prototypes for the APIs. +// +//***************************************************************************** +extern void QEIEnable(unsigned long ulBase); +extern void QEIDisable(unsigned long ulBase); +extern void QEIConfigure(unsigned long ulBase, unsigned long ulConfig, + unsigned long ulMaxPosition); +extern unsigned long QEIPositionGet(unsigned long ulBase); +extern void QEIPositionSet(unsigned long ulBase, unsigned long ulPosition); +extern long QEIDirectionGet(unsigned long ulBase); +extern tBoolean QEIErrorGet(unsigned long ulBase); +extern void QEIVelocityEnable(unsigned long ulBase); +extern void QEIVelocityDisable(unsigned long ulBase); +extern void QEIVelocityConfigure(unsigned long ulBase, unsigned long ulPreDiv, + unsigned long ulPeriod); +extern unsigned long QEIVelocityGet(unsigned long ulBase); +extern void QEIIntRegister(unsigned long ulBase, void (*pfnHandler)(void)); +extern void QEIIntUnregister(unsigned long ulBase); +extern void QEIIntEnable(unsigned long ulBase, unsigned long ulIntFlags); +extern void QEIIntDisable(unsigned long ulBase, unsigned long ulIntFlags); +extern unsigned long QEIIntStatus(unsigned long ulBase, tBoolean bMasked); +extern void QEIIntClear(unsigned long ulBase, unsigned long ulIntFlags); + +//***************************************************************************** +// +// Mark the end of the C bindings section for C++ compilers. +// +//***************************************************************************** +#ifdef __cplusplus +} +#endif + +#endif // __QEI_H__ diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/readme.txt b/bsp/lm3s_9b9x/Libraries/driverlib/readme.txt new file mode 100644 index 0000000000000000000000000000000000000000..7d0a5baa83bc8433cc53a2121e6b6c2990d98878 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/readme.txt @@ -0,0 +1,21 @@ +This project will build the Stellaris Peripheral Driver Library. + +------------------------------------------------------------------------------- + +Copyright (c) 2006-2010 Texas Instruments Incorporated. All rights reserved. +Software License Agreement + +Texas Instruments (TI) is supplying this software for use solely and +exclusively on TI's microcontroller products. The software is owned by +TI and/or its suppliers, and is protected under applicable copyright +laws. You may not combine this software with "viral" open-source +software in order to form a larger program. + +THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +DAMAGES, FOR ANY REASON WHATSOEVER. + +This is part of revision 6459 of the Stellaris Peripheral Driver Library. diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/rom.h b/bsp/lm3s_9b9x/Libraries/driverlib/rom.h new file mode 100644 index 0000000000000000000000000000000000000000..8a9928a66f6f703faf3ec38cc9c5b504c804e238 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/rom.h @@ -0,0 +1,3103 @@ +//***************************************************************************** +// +// rom.h - Macros to facilitate calling functions in the ROM. +// +// Copyright (c) 2007-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +#ifndef __ROM_H__ +#define __ROM_H__ + +//***************************************************************************** +// +// Pointers to the main API tables. +// +//***************************************************************************** +#define ROM_APITABLE ((unsigned long *)0x01000010) +#define ROM_VERSION (ROM_APITABLE[0]) +#define ROM_UARTTABLE ((unsigned long *)(ROM_APITABLE[1])) +#define ROM_SSITABLE ((unsigned long *)(ROM_APITABLE[2])) +#define ROM_I2CTABLE ((unsigned long *)(ROM_APITABLE[3])) +#define ROM_GPIOTABLE ((unsigned long *)(ROM_APITABLE[4])) +#define ROM_ADCTABLE ((unsigned long *)(ROM_APITABLE[5])) +#define ROM_COMPARATORTABLE ((unsigned long *)(ROM_APITABLE[6])) +#define ROM_FLASHTABLE ((unsigned long *)(ROM_APITABLE[7])) +#define ROM_PWMTABLE ((unsigned long *)(ROM_APITABLE[8])) +#define ROM_QEITABLE ((unsigned long *)(ROM_APITABLE[9])) +#define ROM_SYSTICKTABLE ((unsigned long *)(ROM_APITABLE[10])) +#define ROM_TIMERTABLE ((unsigned long *)(ROM_APITABLE[11])) +#define ROM_WATCHDOGTABLE ((unsigned long *)(ROM_APITABLE[12])) +#define ROM_SYSCTLTABLE ((unsigned long *)(ROM_APITABLE[13])) +#define ROM_INTERRUPTTABLE ((unsigned long *)(ROM_APITABLE[14])) +#define ROM_ETHERNETTABLE ((unsigned long *)(ROM_APITABLE[15])) +#define ROM_USBTABLE ((unsigned long *)(ROM_APITABLE[16])) +#define ROM_UDMATABLE ((unsigned long *)(ROM_APITABLE[17])) +#define ROM_CANTABLE ((unsigned long *)(ROM_APITABLE[18])) +#define ROM_HIBERNATETABLE ((unsigned long *)(ROM_APITABLE[19])) +#define ROM_MPUTABLE ((unsigned long *)(ROM_APITABLE[20])) +#define ROM_SOFTWARETABLE ((unsigned long *)(ROM_APITABLE[21])) +#define ROM_I2STABLE ((unsigned long *)(ROM_APITABLE[22])) +#define ROM_EPITABLE ((unsigned long *)(ROM_APITABLE[23])) + +//***************************************************************************** +// +// Macros for calling ROM functions in the ADC API. +// +//***************************************************************************** +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_ADCSequenceDataGet \ + ((long (*)(unsigned long ulBase, \ + unsigned long ulSequenceNum, \ + unsigned long *pulBuffer))ROM_ADCTABLE[0]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_ADCIntDisable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulSequenceNum))ROM_ADCTABLE[1]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_ADCIntEnable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulSequenceNum))ROM_ADCTABLE[2]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_ADCIntStatus \ + ((unsigned long (*)(unsigned long ulBase, \ + unsigned long ulSequenceNum, \ + tBoolean bMasked))ROM_ADCTABLE[3]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_ADCIntClear \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulSequenceNum))ROM_ADCTABLE[4]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_ADCSequenceEnable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulSequenceNum))ROM_ADCTABLE[5]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_ADCSequenceDisable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulSequenceNum))ROM_ADCTABLE[6]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_ADCSequenceConfigure \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulSequenceNum, \ + unsigned long ulTrigger, \ + unsigned long ulPriority))ROM_ADCTABLE[7]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_ADCSequenceStepConfigure \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulSequenceNum, \ + unsigned long ulStep, \ + unsigned long ulConfig))ROM_ADCTABLE[8]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_ADCSequenceOverflow \ + ((long (*)(unsigned long ulBase, \ + unsigned long ulSequenceNum))ROM_ADCTABLE[9]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_ADCSequenceOverflowClear \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulSequenceNum))ROM_ADCTABLE[10]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_ADCSequenceUnderflow \ + ((long (*)(unsigned long ulBase, \ + unsigned long ulSequenceNum))ROM_ADCTABLE[11]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_ADCSequenceUnderflowClear \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulSequenceNum))ROM_ADCTABLE[12]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_ADCProcessorTrigger \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulSequenceNum))ROM_ADCTABLE[13]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_ADCHardwareOversampleConfigure \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulFactor))ROM_ADCTABLE[14]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_ADCComparatorConfigure \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulComp, \ + unsigned long ulConfig))ROM_ADCTABLE[15]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_ADCComparatorRegionSet \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulComp, \ + unsigned long ulLowRef, \ + unsigned long ulHighRef))ROM_ADCTABLE[16]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_ADCComparatorReset \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulComp, \ + tBoolean bTrigger, \ + tBoolean bInterrupt))ROM_ADCTABLE[17]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_ADCComparatorIntDisable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulSequenceNum))ROM_ADCTABLE[18]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_ADCComparatorIntEnable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulSequenceNum))ROM_ADCTABLE[19]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_ADCComparatorIntStatus \ + ((unsigned long (*)(unsigned long ulBase))ROM_ADCTABLE[20]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_ADCComparatorIntClear \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulStatus))ROM_ADCTABLE[21]) +#endif + +//***************************************************************************** +// +// Macros for calling ROM functions in the CAN API. +// +//***************************************************************************** +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_CANIntClear \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulIntClr))ROM_CANTABLE[0]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_CANInit \ + ((void (*)(unsigned long ulBase))ROM_CANTABLE[1]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_CANEnable \ + ((void (*)(unsigned long ulBase))ROM_CANTABLE[2]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_CANDisable \ + ((void (*)(unsigned long ulBase))ROM_CANTABLE[3]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_CANBitTimingSet \ + ((void (*)(unsigned long ulBase, \ + tCANBitClkParms *pClkParms))ROM_CANTABLE[4]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_CANBitTimingGet \ + ((void (*)(unsigned long ulBase, \ + tCANBitClkParms *pClkParms))ROM_CANTABLE[5]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_CANMessageSet \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulObjID, \ + tCANMsgObject *pMsgObject, \ + tMsgObjType eMsgType))ROM_CANTABLE[6]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_CANMessageGet \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulObjID, \ + tCANMsgObject *pMsgObject, \ + tBoolean bClrPendingInt))ROM_CANTABLE[7]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_CANStatusGet \ + ((unsigned long (*)(unsigned long ulBase, \ + tCANStsReg eStatusReg))ROM_CANTABLE[8]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_CANMessageClear \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulObjID))ROM_CANTABLE[9]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_CANIntEnable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulIntFlags))ROM_CANTABLE[10]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_CANIntDisable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulIntFlags))ROM_CANTABLE[11]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_CANIntStatus \ + ((unsigned long (*)(unsigned long ulBase, \ + tCANIntStsReg eIntStsReg))ROM_CANTABLE[12]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_CANRetryGet \ + ((tBoolean (*)(unsigned long ulBase))ROM_CANTABLE[13]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_CANRetrySet \ + ((void (*)(unsigned long ulBase, \ + tBoolean bAutoRetry))ROM_CANTABLE[14]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_CANErrCntrGet \ + ((tBoolean (*)(unsigned long ulBase, \ + unsigned long *pulRxCount, \ + unsigned long *pulTxCount))ROM_CANTABLE[15]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_CANBitRateSet \ + ((unsigned long (*)(unsigned long ulBase, \ + unsigned long ulSourceClock, \ + unsigned long ulBitRate))ROM_CANTABLE[16]) +#endif + +//***************************************************************************** +// +// Macros for calling ROM functions in the Comparator API. +// +//***************************************************************************** +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_ComparatorIntClear \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulComp))ROM_COMPARATORTABLE[0]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_ComparatorConfigure \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulComp, \ + unsigned long ulConfig))ROM_COMPARATORTABLE[1]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_ComparatorRefSet \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulRef))ROM_COMPARATORTABLE[2]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_ComparatorValueGet \ + ((tBoolean (*)(unsigned long ulBase, \ + unsigned long ulComp))ROM_COMPARATORTABLE[3]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_ComparatorIntEnable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulComp))ROM_COMPARATORTABLE[4]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_ComparatorIntDisable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulComp))ROM_COMPARATORTABLE[5]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_ComparatorIntStatus \ + ((tBoolean (*)(unsigned long ulBase, \ + unsigned long ulComp, \ + tBoolean bMasked))ROM_COMPARATORTABLE[6]) +#endif + +//***************************************************************************** +// +// Macros for calling ROM functions in the Ethernet API. +// +//***************************************************************************** +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EPIIntStatus \ + ((unsigned long (*)(unsigned long ulBase, \ + tBoolean bMasked))ROM_EPITABLE[0]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EPIModeSet \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulMode))ROM_EPITABLE[1]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EPIDividerSet \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulDivider))ROM_EPITABLE[2]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EPIConfigSDRAMSet \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulConfig, \ + unsigned long ulRefresh))ROM_EPITABLE[3]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EPIConfigGPModeSet \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulConfig, \ + unsigned long ulFrameCount, \ + unsigned long ulMaxWait))ROM_EPITABLE[4]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EPIConfigHB8Set \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulConfig, \ + unsigned long ulMaxWait))ROM_EPITABLE[5]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EPIConfigHB16Set \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulConfig, \ + unsigned long ulMaxWait))ROM_EPITABLE[6]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EPIAddressMapSet \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulMap))ROM_EPITABLE[7]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EPINonBlockingReadConfigure \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulChannel, \ + unsigned long ulDataSize, \ + unsigned long ulAddress))ROM_EPITABLE[8]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EPINonBlockingReadStart \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulChannel, \ + unsigned long ulCount))ROM_EPITABLE[9]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EPINonBlockingReadStop \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulChannel))ROM_EPITABLE[10]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EPINonBlockingReadCount \ + ((unsigned long (*)(unsigned long ulBase, \ + unsigned long ulChannel))ROM_EPITABLE[11]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EPINonBlockingReadAvail \ + ((unsigned long (*)(unsigned long ulBase))ROM_EPITABLE[12]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EPINonBlockingReadGet32 \ + ((unsigned long (*)(unsigned long ulBase, \ + unsigned long ulCount, \ + unsigned long *pulBuf))ROM_EPITABLE[13]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EPINonBlockingReadGet16 \ + ((unsigned long (*)(unsigned long ulBase, \ + unsigned long ulCount, \ + unsigned short *pusBuf))ROM_EPITABLE[14]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EPINonBlockingReadGet8 \ + ((unsigned long (*)(unsigned long ulBase, \ + unsigned long ulCount, \ + unsigned char *pucBuf))ROM_EPITABLE[15]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EPIFIFOConfig \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulConfig))ROM_EPITABLE[16]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EPIWriteFIFOCountGet \ + ((unsigned long (*)(unsigned long ulBase))ROM_EPITABLE[17]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EPIIntEnable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulIntFlags))ROM_EPITABLE[18]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EPIIntDisable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulIntFlags))ROM_EPITABLE[19]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EPIIntErrorStatus \ + ((unsigned long (*)(unsigned long ulBase))ROM_EPITABLE[20]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EPIIntErrorClear \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulErrFlags))ROM_EPITABLE[21]) +#endif + +//***************************************************************************** +// +// Macros for calling ROM functions in the Ethernet API. +// +//***************************************************************************** +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EthernetIntClear \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulIntFlags))ROM_ETHERNETTABLE[0]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EthernetInitExpClk \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulEthClk))ROM_ETHERNETTABLE[1]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EthernetConfigSet \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulConfig))ROM_ETHERNETTABLE[2]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EthernetConfigGet \ + ((unsigned long (*)(unsigned long ulBase))ROM_ETHERNETTABLE[3]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EthernetMACAddrSet \ + ((void (*)(unsigned long ulBase, \ + unsigned char *pucMACAddr))ROM_ETHERNETTABLE[4]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EthernetMACAddrGet \ + ((void (*)(unsigned long ulBase, \ + unsigned char *pucMACAddr))ROM_ETHERNETTABLE[5]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EthernetEnable \ + ((void (*)(unsigned long ulBase))ROM_ETHERNETTABLE[6]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EthernetDisable \ + ((void (*)(unsigned long ulBase))ROM_ETHERNETTABLE[7]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EthernetPacketAvail \ + ((tBoolean (*)(unsigned long ulBase))ROM_ETHERNETTABLE[8]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EthernetSpaceAvail \ + ((tBoolean (*)(unsigned long ulBase))ROM_ETHERNETTABLE[9]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EthernetPacketGetNonBlocking \ + ((long (*)(unsigned long ulBase, \ + unsigned char *pucBuf, \ + long lBufLen))ROM_ETHERNETTABLE[10]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EthernetPacketGet \ + ((long (*)(unsigned long ulBase, \ + unsigned char *pucBuf, \ + long lBufLen))ROM_ETHERNETTABLE[11]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EthernetPacketPutNonBlocking \ + ((long (*)(unsigned long ulBase, \ + unsigned char *pucBuf, \ + long lBufLen))ROM_ETHERNETTABLE[12]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EthernetPacketPut \ + ((long (*)(unsigned long ulBase, \ + unsigned char *pucBuf, \ + long lBufLen))ROM_ETHERNETTABLE[13]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EthernetIntEnable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulIntFlags))ROM_ETHERNETTABLE[14]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EthernetIntDisable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulIntFlags))ROM_ETHERNETTABLE[15]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EthernetIntStatus \ + ((unsigned long (*)(unsigned long ulBase, \ + tBoolean bMasked))ROM_ETHERNETTABLE[16]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EthernetPHYWrite \ + ((void (*)(unsigned long ulBase, \ + unsigned char ucRegAddr, \ + unsigned long ulData))ROM_ETHERNETTABLE[17]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_EthernetPHYRead \ + ((unsigned long (*)(unsigned long ulBase, \ + unsigned char ucRegAddr))ROM_ETHERNETTABLE[18]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_UpdateEthernet \ + ((void (*)(unsigned long ulClock))ROM_ETHERNETTABLE[19]) +#endif + +//***************************************************************************** +// +// Macros for calling ROM functions in the Flash API. +// +//***************************************************************************** +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_FlashProgram \ + ((long (*)(unsigned long *pulData, \ + unsigned long ulAddress, \ + unsigned long ulCount))ROM_FLASHTABLE[0]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_FlashUsecGet \ + ((unsigned long (*)(void))ROM_FLASHTABLE[1]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_FlashUsecSet \ + ((void (*)(unsigned long ulClocks))ROM_FLASHTABLE[2]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_FlashErase \ + ((long (*)(unsigned long ulAddress))ROM_FLASHTABLE[3]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_FlashProtectGet \ + ((tFlashProtection (*)(unsigned long ulAddress))ROM_FLASHTABLE[4]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_FlashProtectSet \ + ((long (*)(unsigned long ulAddress, \ + tFlashProtection eProtect))ROM_FLASHTABLE[5]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_FlashProtectSave \ + ((long (*)(void))ROM_FLASHTABLE[6]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_FlashUserGet \ + ((long (*)(unsigned long *pulUser0, \ + unsigned long *pulUser1))ROM_FLASHTABLE[7]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_FlashUserSet \ + ((long (*)(unsigned long ulUser0, \ + unsigned long ulUser1))ROM_FLASHTABLE[8]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_FlashUserSave \ + ((long (*)(void))ROM_FLASHTABLE[9]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_FlashIntEnable \ + ((void (*)(unsigned long ulIntFlags))ROM_FLASHTABLE[10]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_FlashIntDisable \ + ((void (*)(unsigned long ulIntFlags))ROM_FLASHTABLE[11]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_FlashIntStatus \ + ((unsigned long (*)(tBoolean bMasked))ROM_FLASHTABLE[12]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_FlashIntClear \ + ((void (*)(unsigned long ulIntFlags))ROM_FLASHTABLE[13]) +#endif + +//***************************************************************************** +// +// Macros for calling ROM functions in the GPIO API. +// +//***************************************************************************** +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_GPIOPinWrite \ + ((void (*)(unsigned long ulPort, \ + unsigned char ucPins, \ + unsigned char ucVal))ROM_GPIOTABLE[0]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_GPIODirModeSet \ + ((void (*)(unsigned long ulPort, \ + unsigned char ucPins, \ + unsigned long ulPinIO))ROM_GPIOTABLE[1]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_GPIODirModeGet \ + ((unsigned long (*)(unsigned long ulPort, \ + unsigned char ucPin))ROM_GPIOTABLE[2]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_GPIOIntTypeSet \ + ((void (*)(unsigned long ulPort, \ + unsigned char ucPins, \ + unsigned long ulIntType))ROM_GPIOTABLE[3]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_GPIOIntTypeGet \ + ((unsigned long (*)(unsigned long ulPort, \ + unsigned char ucPin))ROM_GPIOTABLE[4]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_GPIOPadConfigSet \ + ((void (*)(unsigned long ulPort, \ + unsigned char ucPins, \ + unsigned long ulStrength, \ + unsigned long ulPadType))ROM_GPIOTABLE[5]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_GPIOPadConfigGet \ + ((void (*)(unsigned long ulPort, \ + unsigned char ucPin, \ + unsigned long *pulStrength, \ + unsigned long *pulPadType))ROM_GPIOTABLE[6]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_GPIOPinIntEnable \ + ((void (*)(unsigned long ulPort, \ + unsigned char ucPins))ROM_GPIOTABLE[7]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_GPIOPinIntDisable \ + ((void (*)(unsigned long ulPort, \ + unsigned char ucPins))ROM_GPIOTABLE[8]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_GPIOPinIntStatus \ + ((long (*)(unsigned long ulPort, \ + tBoolean bMasked))ROM_GPIOTABLE[9]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_GPIOPinIntClear \ + ((void (*)(unsigned long ulPort, \ + unsigned char ucPins))ROM_GPIOTABLE[10]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_GPIOPinRead \ + ((long (*)(unsigned long ulPort, \ + unsigned char ucPins))ROM_GPIOTABLE[11]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_GPIOPinTypeCAN \ + ((void (*)(unsigned long ulPort, \ + unsigned char ucPins))ROM_GPIOTABLE[12]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_GPIOPinTypeComparator \ + ((void (*)(unsigned long ulPort, \ + unsigned char ucPins))ROM_GPIOTABLE[13]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_GPIOPinTypeGPIOInput \ + ((void (*)(unsigned long ulPort, \ + unsigned char ucPins))ROM_GPIOTABLE[14]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_GPIOPinTypeGPIOOutput \ + ((void (*)(unsigned long ulPort, \ + unsigned char ucPins))ROM_GPIOTABLE[15]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_GPIOPinTypeI2C \ + ((void (*)(unsigned long ulPort, \ + unsigned char ucPins))ROM_GPIOTABLE[16]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_GPIOPinTypePWM \ + ((void (*)(unsigned long ulPort, \ + unsigned char ucPins))ROM_GPIOTABLE[17]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_GPIOPinTypeQEI \ + ((void (*)(unsigned long ulPort, \ + unsigned char ucPins))ROM_GPIOTABLE[18]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_GPIOPinTypeSSI \ + ((void (*)(unsigned long ulPort, \ + unsigned char ucPins))ROM_GPIOTABLE[19]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_GPIOPinTypeTimer \ + ((void (*)(unsigned long ulPort, \ + unsigned char ucPins))ROM_GPIOTABLE[20]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_GPIOPinTypeUART \ + ((void (*)(unsigned long ulPort, \ + unsigned char ucPins))ROM_GPIOTABLE[21]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_GPIOPinTypeGPIOOutputOD \ + ((void (*)(unsigned long ulPort, \ + unsigned char ucPins))ROM_GPIOTABLE[22]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_GPIOPinTypeADC \ + ((void (*)(unsigned long ulPort, \ + unsigned char ucPins))ROM_GPIOTABLE[23]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_GPIOPinTypeUSBDigital \ + ((void (*)(unsigned long ulPort, \ + unsigned char ucPins))ROM_GPIOTABLE[24]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_GPIOPinTypeI2S \ + ((void (*)(unsigned long ulPort, \ + unsigned char ucPins))ROM_GPIOTABLE[25]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_GPIOPinConfigure \ + ((void (*)(unsigned long ulPinConfig))ROM_GPIOTABLE[26]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_GPIOPinTypeEthernetLED \ + ((void (*)(unsigned long ulPort, \ + unsigned char ucPins))ROM_GPIOTABLE[27]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_GPIOPinTypeUSBAnalog \ + ((void (*)(unsigned long ulPort, \ + unsigned char ucPins))ROM_GPIOTABLE[28]) +#endif + +//***************************************************************************** +// +// Macros for calling ROM functions in the Hibernate API. +// +//***************************************************************************** +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_HibernateIntClear \ + ((void (*)(unsigned long ulIntFlags))ROM_HIBERNATETABLE[0]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_HibernateEnableExpClk \ + ((void (*)(unsigned long ulHibClk))ROM_HIBERNATETABLE[1]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_HibernateDisable \ + ((void (*)(void))ROM_HIBERNATETABLE[2]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_HibernateClockSelect \ + ((void (*)(unsigned long ulClockInput))ROM_HIBERNATETABLE[3]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_HibernateRTCEnable \ + ((void (*)(void))ROM_HIBERNATETABLE[4]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_HibernateRTCDisable \ + ((void (*)(void))ROM_HIBERNATETABLE[5]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_HibernateWakeSet \ + ((void (*)(unsigned long ulWakeFlags))ROM_HIBERNATETABLE[6]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_HibernateWakeGet \ + ((unsigned long (*)(void))ROM_HIBERNATETABLE[7]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_HibernateLowBatSet \ + ((void (*)(unsigned long ulLowBatFlags))ROM_HIBERNATETABLE[8]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_HibernateLowBatGet \ + ((unsigned long (*)(void))ROM_HIBERNATETABLE[9]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_HibernateRTCSet \ + ((void (*)(unsigned long ulRTCValue))ROM_HIBERNATETABLE[10]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_HibernateRTCGet \ + ((unsigned long (*)(void))ROM_HIBERNATETABLE[11]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_HibernateRTCMatch0Set \ + ((void (*)(unsigned long ulMatch))ROM_HIBERNATETABLE[12]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_HibernateRTCMatch0Get \ + ((unsigned long (*)(void))ROM_HIBERNATETABLE[13]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_HibernateRTCMatch1Set \ + ((void (*)(unsigned long ulMatch))ROM_HIBERNATETABLE[14]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_HibernateRTCMatch1Get \ + ((unsigned long (*)(void))ROM_HIBERNATETABLE[15]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_HibernateRTCTrimSet \ + ((void (*)(unsigned long ulTrim))ROM_HIBERNATETABLE[16]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_HibernateRTCTrimGet \ + ((unsigned long (*)(void))ROM_HIBERNATETABLE[17]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_HibernateDataSet \ + ((void (*)(unsigned long *pulData, \ + unsigned long ulCount))ROM_HIBERNATETABLE[18]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_HibernateDataGet \ + ((void (*)(unsigned long *pulData, \ + unsigned long ulCount))ROM_HIBERNATETABLE[19]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_HibernateRequest \ + ((void (*)(void))ROM_HIBERNATETABLE[20]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_HibernateIntEnable \ + ((void (*)(unsigned long ulIntFlags))ROM_HIBERNATETABLE[21]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_HibernateIntDisable \ + ((void (*)(unsigned long ulIntFlags))ROM_HIBERNATETABLE[22]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_HibernateIntStatus \ + ((unsigned long (*)(tBoolean bMasked))ROM_HIBERNATETABLE[23]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_HibernateIsActive \ + ((unsigned int (*)(void))ROM_HIBERNATETABLE[24]) +#endif + +//***************************************************************************** +// +// Macros for calling ROM functions in the I2C API. +// +//***************************************************************************** +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2CMasterDataPut \ + ((void (*)(unsigned long ulBase, \ + unsigned char ucData))ROM_I2CTABLE[0]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2CMasterInitExpClk \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulI2CClk, \ + tBoolean bFast))ROM_I2CTABLE[1]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2CSlaveInit \ + ((void (*)(unsigned long ulBase, \ + unsigned char ucSlaveAddr))ROM_I2CTABLE[2]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2CMasterEnable \ + ((void (*)(unsigned long ulBase))ROM_I2CTABLE[3]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2CSlaveEnable \ + ((void (*)(unsigned long ulBase))ROM_I2CTABLE[4]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2CMasterDisable \ + ((void (*)(unsigned long ulBase))ROM_I2CTABLE[5]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2CSlaveDisable \ + ((void (*)(unsigned long ulBase))ROM_I2CTABLE[6]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2CMasterIntEnable \ + ((void (*)(unsigned long ulBase))ROM_I2CTABLE[7]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2CSlaveIntEnable \ + ((void (*)(unsigned long ulBase))ROM_I2CTABLE[8]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2CMasterIntDisable \ + ((void (*)(unsigned long ulBase))ROM_I2CTABLE[9]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2CSlaveIntDisable \ + ((void (*)(unsigned long ulBase))ROM_I2CTABLE[10]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2CMasterIntStatus \ + ((tBoolean (*)(unsigned long ulBase, \ + tBoolean bMasked))ROM_I2CTABLE[11]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2CSlaveIntStatus \ + ((tBoolean (*)(unsigned long ulBase, \ + tBoolean bMasked))ROM_I2CTABLE[12]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2CMasterIntClear \ + ((void (*)(unsigned long ulBase))ROM_I2CTABLE[13]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2CSlaveIntClear \ + ((void (*)(unsigned long ulBase))ROM_I2CTABLE[14]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2CMasterSlaveAddrSet \ + ((void (*)(unsigned long ulBase, \ + unsigned char ucSlaveAddr, \ + tBoolean bReceive))ROM_I2CTABLE[15]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2CMasterBusy \ + ((tBoolean (*)(unsigned long ulBase))ROM_I2CTABLE[16]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2CMasterBusBusy \ + ((tBoolean (*)(unsigned long ulBase))ROM_I2CTABLE[17]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2CMasterControl \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulCmd))ROM_I2CTABLE[18]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2CMasterErr \ + ((unsigned long (*)(unsigned long ulBase))ROM_I2CTABLE[19]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2CMasterDataGet \ + ((unsigned long (*)(unsigned long ulBase))ROM_I2CTABLE[20]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2CSlaveStatus \ + ((unsigned long (*)(unsigned long ulBase))ROM_I2CTABLE[21]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2CSlaveDataPut \ + ((void (*)(unsigned long ulBase, \ + unsigned char ucData))ROM_I2CTABLE[22]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2CSlaveDataGet \ + ((unsigned long (*)(unsigned long ulBase))ROM_I2CTABLE[23]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_UpdateI2C \ + ((void (*)(void))ROM_I2CTABLE[24]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2CSlaveIntEnableEx \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulIntFlags))ROM_I2CTABLE[25]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2CSlaveIntDisableEx \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulIntFlags))ROM_I2CTABLE[26]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2CSlaveIntStatusEx \ + ((unsigned long (*)(unsigned long ulBase, \ + tBoolean bMasked))ROM_I2CTABLE[27]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2CSlaveIntClearEx \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulIntFlags))ROM_I2CTABLE[28]) +#endif + +//***************************************************************************** +// +// Macros for calling ROM functions in the I2S API. +// +//***************************************************************************** +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2SIntStatus \ + ((unsigned long (*)(unsigned long ulBase, \ + tBoolean bMasked))ROM_I2STABLE[0]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2STxEnable \ + ((void (*)(unsigned long ulBase))ROM_I2STABLE[1]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2STxDisable \ + ((void (*)(unsigned long ulBase))ROM_I2STABLE[2]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2STxDataPut \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulData))ROM_I2STABLE[3]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2STxDataPutNonBlocking \ + ((long (*)(unsigned long ulBase, \ + unsigned long ulData))ROM_I2STABLE[4]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2STxConfigSet \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulConfig))ROM_I2STABLE[5]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2STxFIFOLimitSet \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulLevel))ROM_I2STABLE[6]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2STxFIFOLimitGet \ + ((unsigned long (*)(unsigned long ulBase))ROM_I2STABLE[7]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2STxFIFOLevelGet \ + ((unsigned long (*)(unsigned long ulBase))ROM_I2STABLE[8]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2SRxEnable \ + ((void (*)(unsigned long ulBase))ROM_I2STABLE[9]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2SRxDisable \ + ((void (*)(unsigned long ulBase))ROM_I2STABLE[10]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2SRxDataGet \ + ((void (*)(unsigned long ulBase, \ + unsigned long *pulData))ROM_I2STABLE[11]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2SRxDataGetNonBlocking \ + ((long (*)(unsigned long ulBase, \ + unsigned long *pulData))ROM_I2STABLE[12]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2SRxConfigSet \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulConfig))ROM_I2STABLE[13]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2SRxFIFOLimitSet \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulLevel))ROM_I2STABLE[14]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2SRxFIFOLimitGet \ + ((unsigned long (*)(unsigned long ulBase))ROM_I2STABLE[15]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2SRxFIFOLevelGet \ + ((unsigned long (*)(unsigned long ulBase))ROM_I2STABLE[16]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2STxRxEnable \ + ((void (*)(unsigned long ulBase))ROM_I2STABLE[17]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2STxRxDisable \ + ((void (*)(unsigned long ulBase))ROM_I2STABLE[18]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2STxRxConfigSet \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulConfig))ROM_I2STABLE[19]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2SMasterClockSelect \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulMClock))ROM_I2STABLE[20]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2SIntEnable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulIntFlags))ROM_I2STABLE[21]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2SIntDisable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulIntFlags))ROM_I2STABLE[22]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_I2SIntClear \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulIntFlags))ROM_I2STABLE[23]) +#endif + +//***************************************************************************** +// +// Macros for calling ROM functions in the Interrupt API. +// +//***************************************************************************** +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_IntEnable \ + ((void (*)(unsigned long ulInterrupt))ROM_INTERRUPTTABLE[0]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_IntMasterEnable \ + ((tBoolean (*)(void))ROM_INTERRUPTTABLE[1]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_IntMasterDisable \ + ((tBoolean (*)(void))ROM_INTERRUPTTABLE[2]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_IntDisable \ + ((void (*)(unsigned long ulInterrupt))ROM_INTERRUPTTABLE[3]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_IntPriorityGroupingSet \ + ((void (*)(unsigned long ulBits))ROM_INTERRUPTTABLE[4]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_IntPriorityGroupingGet \ + ((unsigned long (*)(void))ROM_INTERRUPTTABLE[5]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_IntPrioritySet \ + ((void (*)(unsigned long ulInterrupt, \ + unsigned char ucPriority))ROM_INTERRUPTTABLE[6]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_IntPriorityGet \ + ((long (*)(unsigned long ulInterrupt))ROM_INTERRUPTTABLE[7]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_IntPendSet \ + ((void (*)(unsigned long ulInterrupt))ROM_INTERRUPTTABLE[8]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_IntPendClear \ + ((void (*)(unsigned long ulInterrupt))ROM_INTERRUPTTABLE[9]) +#endif + +//***************************************************************************** +// +// Macros for calling ROM functions in the MPU API. +// +//***************************************************************************** +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_MPUEnable \ + ((void (*)(unsigned long ulMPUConfig))ROM_MPUTABLE[0]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_MPUDisable \ + ((void (*)(void))ROM_MPUTABLE[1]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_MPURegionCountGet \ + ((unsigned long (*)(void))ROM_MPUTABLE[2]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_MPURegionEnable \ + ((void (*)(unsigned long ulRegion))ROM_MPUTABLE[3]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_MPURegionDisable \ + ((void (*)(unsigned long ulRegion))ROM_MPUTABLE[4]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_MPURegionSet \ + ((void (*)(unsigned long ulRegion, \ + unsigned long ulAddr, \ + unsigned long ulFlags))ROM_MPUTABLE[5]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_MPURegionGet \ + ((void (*)(unsigned long ulRegion, \ + unsigned long *pulAddr, \ + unsigned long *pulFlags))ROM_MPUTABLE[6]) +#endif + +//***************************************************************************** +// +// Macros for calling ROM functions in the PWM API. +// +//***************************************************************************** +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_PWMPulseWidthSet \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulPWMOut, \ + unsigned long ulWidth))ROM_PWMTABLE[0]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_PWMGenConfigure \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulGen, \ + unsigned long ulConfig))ROM_PWMTABLE[1]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_PWMGenPeriodSet \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulGen, \ + unsigned long ulPeriod))ROM_PWMTABLE[2]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_PWMGenPeriodGet \ + ((unsigned long (*)(unsigned long ulBase, \ + unsigned long ulGen))ROM_PWMTABLE[3]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_PWMGenEnable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulGen))ROM_PWMTABLE[4]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_PWMGenDisable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulGen))ROM_PWMTABLE[5]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_PWMPulseWidthGet \ + ((unsigned long (*)(unsigned long ulBase, \ + unsigned long ulPWMOut))ROM_PWMTABLE[6]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_PWMDeadBandEnable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulGen, \ + unsigned short usRise, \ + unsigned short usFall))ROM_PWMTABLE[7]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_PWMDeadBandDisable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulGen))ROM_PWMTABLE[8]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_PWMSyncUpdate \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulGenBits))ROM_PWMTABLE[9]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_PWMSyncTimeBase \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulGenBits))ROM_PWMTABLE[10]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_PWMOutputState \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulPWMOutBits, \ + tBoolean bEnable))ROM_PWMTABLE[11]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_PWMOutputInvert \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulPWMOutBits, \ + tBoolean bInvert))ROM_PWMTABLE[12]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_PWMOutputFault \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulPWMOutBits, \ + tBoolean bFaultSuppress))ROM_PWMTABLE[13]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_PWMGenIntTrigEnable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulGen, \ + unsigned long ulIntTrig))ROM_PWMTABLE[14]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_PWMGenIntTrigDisable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulGen, \ + unsigned long ulIntTrig))ROM_PWMTABLE[15]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_PWMGenIntStatus \ + ((unsigned long (*)(unsigned long ulBase, \ + unsigned long ulGen, \ + tBoolean bMasked))ROM_PWMTABLE[16]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_PWMGenIntClear \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulGen, \ + unsigned long ulInts))ROM_PWMTABLE[17]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_PWMIntEnable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulGenFault))ROM_PWMTABLE[18]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_PWMIntDisable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulGenFault))ROM_PWMTABLE[19]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_PWMFaultIntClear \ + ((void (*)(unsigned long ulBase))ROM_PWMTABLE[20]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_PWMIntStatus \ + ((unsigned long (*)(unsigned long ulBase, \ + tBoolean bMasked))ROM_PWMTABLE[21]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_PWMOutputFaultLevel \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulPWMOutBits, \ + tBoolean bDriveHigh))ROM_PWMTABLE[22]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_PWMFaultIntClearExt \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulFaultInts))ROM_PWMTABLE[23]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_PWMGenFaultConfigure \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulGen, \ + unsigned long ulMinFaultPeriod, \ + unsigned long ulFaultSenses))ROM_PWMTABLE[24]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_PWMGenFaultTriggerSet \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulGen, \ + unsigned long ulGroup, \ + unsigned long ulFaultTriggers))ROM_PWMTABLE[25]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_PWMGenFaultTriggerGet \ + ((unsigned long (*)(unsigned long ulBase, \ + unsigned long ulGen, \ + unsigned long ulGroup))ROM_PWMTABLE[26]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_PWMGenFaultStatus \ + ((unsigned long (*)(unsigned long ulBase, \ + unsigned long ulGen, \ + unsigned long ulGroup))ROM_PWMTABLE[27]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_PWMGenFaultClear \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulGen, \ + unsigned long ulGroup, \ + unsigned long ulFaultTriggers))ROM_PWMTABLE[28]) +#endif + +//***************************************************************************** +// +// Macros for calling ROM functions in the QEI API. +// +//***************************************************************************** +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_QEIPositionGet \ + ((unsigned long (*)(unsigned long ulBase))ROM_QEITABLE[0]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_QEIEnable \ + ((void (*)(unsigned long ulBase))ROM_QEITABLE[1]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_QEIDisable \ + ((void (*)(unsigned long ulBase))ROM_QEITABLE[2]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_QEIConfigure \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulConfig, \ + unsigned long ulMaxPosition))ROM_QEITABLE[3]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_QEIPositionSet \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulPosition))ROM_QEITABLE[4]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_QEIDirectionGet \ + ((long (*)(unsigned long ulBase))ROM_QEITABLE[5]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_QEIErrorGet \ + ((tBoolean (*)(unsigned long ulBase))ROM_QEITABLE[6]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_QEIVelocityEnable \ + ((void (*)(unsigned long ulBase))ROM_QEITABLE[7]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_QEIVelocityDisable \ + ((void (*)(unsigned long ulBase))ROM_QEITABLE[8]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_QEIVelocityConfigure \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulPreDiv, \ + unsigned long ulPeriod))ROM_QEITABLE[9]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_QEIVelocityGet \ + ((unsigned long (*)(unsigned long ulBase))ROM_QEITABLE[10]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_QEIIntEnable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulIntFlags))ROM_QEITABLE[11]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_QEIIntDisable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulIntFlags))ROM_QEITABLE[12]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_QEIIntStatus \ + ((unsigned long (*)(unsigned long ulBase, \ + tBoolean bMasked))ROM_QEITABLE[13]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_QEIIntClear \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulIntFlags))ROM_QEITABLE[14]) +#endif + +//***************************************************************************** +// +// Macros for calling ROM functions in the SSI API. +// +//***************************************************************************** +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SSIDataPut \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulData))ROM_SSITABLE[0]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SSIConfigSetExpClk \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulSSIClk, \ + unsigned long ulProtocol, \ + unsigned long ulMode, \ + unsigned long ulBitRate, \ + unsigned long ulDataWidth))ROM_SSITABLE[1]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SSIEnable \ + ((void (*)(unsigned long ulBase))ROM_SSITABLE[2]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SSIDisable \ + ((void (*)(unsigned long ulBase))ROM_SSITABLE[3]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SSIIntEnable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulIntFlags))ROM_SSITABLE[4]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SSIIntDisable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulIntFlags))ROM_SSITABLE[5]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SSIIntStatus \ + ((unsigned long (*)(unsigned long ulBase, \ + tBoolean bMasked))ROM_SSITABLE[6]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SSIIntClear \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulIntFlags))ROM_SSITABLE[7]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SSIDataPutNonBlocking \ + ((long (*)(unsigned long ulBase, \ + unsigned long ulData))ROM_SSITABLE[8]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SSIDataGet \ + ((void (*)(unsigned long ulBase, \ + unsigned long *pulData))ROM_SSITABLE[9]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SSIDataGetNonBlocking \ + ((long (*)(unsigned long ulBase, \ + unsigned long *pulData))ROM_SSITABLE[10]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_UpdateSSI \ + ((void (*)(void))ROM_SSITABLE[11]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SSIDMAEnable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulDMAFlags))ROM_SSITABLE[12]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SSIDMADisable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulDMAFlags))ROM_SSITABLE[13]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SSIBusy \ + ((tBoolean (*)(unsigned long ulBase))ROM_SSITABLE[14]) +#endif + +//***************************************************************************** +// +// Macros for calling ROM functions in the SysCtl API. +// +//***************************************************************************** +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysCtlSleep \ + ((void (*)(void))ROM_SYSCTLTABLE[0]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysCtlSRAMSizeGet \ + ((unsigned long (*)(void))ROM_SYSCTLTABLE[1]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysCtlFlashSizeGet \ + ((unsigned long (*)(void))ROM_SYSCTLTABLE[2]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysCtlPinPresent \ + ((tBoolean (*)(unsigned long ulPin))ROM_SYSCTLTABLE[3]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysCtlPeripheralPresent \ + ((tBoolean (*)(unsigned long ulPeripheral))ROM_SYSCTLTABLE[4]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysCtlPeripheralReset \ + ((void (*)(unsigned long ulPeripheral))ROM_SYSCTLTABLE[5]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysCtlPeripheralEnable \ + ((void (*)(unsigned long ulPeripheral))ROM_SYSCTLTABLE[6]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysCtlPeripheralDisable \ + ((void (*)(unsigned long ulPeripheral))ROM_SYSCTLTABLE[7]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysCtlPeripheralSleepEnable \ + ((void (*)(unsigned long ulPeripheral))ROM_SYSCTLTABLE[8]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysCtlPeripheralSleepDisable \ + ((void (*)(unsigned long ulPeripheral))ROM_SYSCTLTABLE[9]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysCtlPeripheralDeepSleepEnable \ + ((void (*)(unsigned long ulPeripheral))ROM_SYSCTLTABLE[10]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysCtlPeripheralDeepSleepDisable \ + ((void (*)(unsigned long ulPeripheral))ROM_SYSCTLTABLE[11]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysCtlPeripheralClockGating \ + ((void (*)(tBoolean bEnable))ROM_SYSCTLTABLE[12]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysCtlIntEnable \ + ((void (*)(unsigned long ulInts))ROM_SYSCTLTABLE[13]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysCtlIntDisable \ + ((void (*)(unsigned long ulInts))ROM_SYSCTLTABLE[14]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysCtlIntClear \ + ((void (*)(unsigned long ulInts))ROM_SYSCTLTABLE[15]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysCtlIntStatus \ + ((unsigned long (*)(tBoolean bMasked))ROM_SYSCTLTABLE[16]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysCtlLDOSet \ + ((void (*)(unsigned long ulVoltage))ROM_SYSCTLTABLE[17]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysCtlLDOGet \ + ((unsigned long (*)(void))ROM_SYSCTLTABLE[18]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysCtlReset \ + ((void (*)(void))ROM_SYSCTLTABLE[19]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysCtlDeepSleep \ + ((void (*)(void))ROM_SYSCTLTABLE[20]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysCtlResetCauseGet \ + ((unsigned long (*)(void))ROM_SYSCTLTABLE[21]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysCtlResetCauseClear \ + ((void (*)(unsigned long ulCauses))ROM_SYSCTLTABLE[22]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysCtlClockSet \ + ((void (*)(unsigned long ulConfig))ROM_SYSCTLTABLE[23]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysCtlClockGet \ + ((unsigned long (*)(void))ROM_SYSCTLTABLE[24]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysCtlPWMClockSet \ + ((void (*)(unsigned long ulConfig))ROM_SYSCTLTABLE[25]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysCtlPWMClockGet \ + ((unsigned long (*)(void))ROM_SYSCTLTABLE[26]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysCtlADCSpeedSet \ + ((void (*)(unsigned long ulSpeed))ROM_SYSCTLTABLE[27]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysCtlADCSpeedGet \ + ((unsigned long (*)(void))ROM_SYSCTLTABLE[28]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysCtlGPIOAHBEnable \ + ((void (*)(unsigned long ulGPIOPeripheral))ROM_SYSCTLTABLE[29]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysCtlGPIOAHBDisable \ + ((void (*)(unsigned long ulGPIOPeripheral))ROM_SYSCTLTABLE[30]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysCtlUSBPLLEnable \ + ((void (*)(void))ROM_SYSCTLTABLE[31]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysCtlUSBPLLDisable \ + ((void (*)(void))ROM_SYSCTLTABLE[32]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysCtlI2SMClkSet \ + ((unsigned long (*)(unsigned long ulInputClock, \ + unsigned long ulMClk))ROM_SYSCTLTABLE[33]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysCtlDelay \ + ((void (*)(unsigned long ulCount))ROM_SYSCTLTABLE[34]) +#endif + +//***************************************************************************** +// +// Macros for calling ROM functions in the SysTick API. +// +//***************************************************************************** +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysTickValueGet \ + ((unsigned long (*)(void))ROM_SYSTICKTABLE[0]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysTickEnable \ + ((void (*)(void))ROM_SYSTICKTABLE[1]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysTickDisable \ + ((void (*)(void))ROM_SYSTICKTABLE[2]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysTickIntEnable \ + ((void (*)(void))ROM_SYSTICKTABLE[3]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysTickIntDisable \ + ((void (*)(void))ROM_SYSTICKTABLE[4]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysTickPeriodSet \ + ((void (*)(unsigned long ulPeriod))ROM_SYSTICKTABLE[5]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_SysTickPeriodGet \ + ((unsigned long (*)(void))ROM_SYSTICKTABLE[6]) +#endif + +//***************************************************************************** +// +// Macros for calling ROM functions in the Timer API. +// +//***************************************************************************** +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_TimerIntClear \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulIntFlags))ROM_TIMERTABLE[0]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_TimerEnable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulTimer))ROM_TIMERTABLE[1]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_TimerDisable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulTimer))ROM_TIMERTABLE[2]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_TimerConfigure \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulConfig))ROM_TIMERTABLE[3]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_TimerControlLevel \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulTimer, \ + tBoolean bInvert))ROM_TIMERTABLE[4]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_TimerControlTrigger \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulTimer, \ + tBoolean bEnable))ROM_TIMERTABLE[5]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_TimerControlEvent \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulTimer, \ + unsigned long ulEvent))ROM_TIMERTABLE[6]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_TimerControlStall \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulTimer, \ + tBoolean bStall))ROM_TIMERTABLE[7]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_TimerRTCEnable \ + ((void (*)(unsigned long ulBase))ROM_TIMERTABLE[8]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_TimerRTCDisable \ + ((void (*)(unsigned long ulBase))ROM_TIMERTABLE[9]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_TimerPrescaleSet \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulTimer, \ + unsigned long ulValue))ROM_TIMERTABLE[10]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_TimerPrescaleGet \ + ((unsigned long (*)(unsigned long ulBase, \ + unsigned long ulTimer))ROM_TIMERTABLE[11]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_TimerLoadSet \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulTimer, \ + unsigned long ulValue))ROM_TIMERTABLE[14]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_TimerLoadGet \ + ((unsigned long (*)(unsigned long ulBase, \ + unsigned long ulTimer))ROM_TIMERTABLE[15]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_TimerValueGet \ + ((unsigned long (*)(unsigned long ulBase, \ + unsigned long ulTimer))ROM_TIMERTABLE[16]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_TimerMatchSet \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulTimer, \ + unsigned long ulValue))ROM_TIMERTABLE[17]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_TimerMatchGet \ + ((unsigned long (*)(unsigned long ulBase, \ + unsigned long ulTimer))ROM_TIMERTABLE[18]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_TimerIntEnable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulIntFlags))ROM_TIMERTABLE[19]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_TimerIntDisable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulIntFlags))ROM_TIMERTABLE[20]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_TimerIntStatus \ + ((unsigned long (*)(unsigned long ulBase, \ + tBoolean bMasked))ROM_TIMERTABLE[21]) +#endif + +//***************************************************************************** +// +// Macros for calling ROM functions in the UART API. +// +//***************************************************************************** +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_UARTCharPut \ + ((void (*)(unsigned long ulBase, \ + unsigned char ucData))ROM_UARTTABLE[0]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_UARTParityModeSet \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulParity))ROM_UARTTABLE[1]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_UARTParityModeGet \ + ((unsigned long (*)(unsigned long ulBase))ROM_UARTTABLE[2]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_UARTFIFOLevelSet \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulTxLevel, \ + unsigned long ulRxLevel))ROM_UARTTABLE[3]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_UARTFIFOLevelGet \ + ((void (*)(unsigned long ulBase, \ + unsigned long *pulTxLevel, \ + unsigned long *pulRxLevel))ROM_UARTTABLE[4]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_UARTConfigSetExpClk \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulUARTClk, \ + unsigned long ulBaud, \ + unsigned long ulConfig))ROM_UARTTABLE[5]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_UARTConfigGetExpClk \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulUARTClk, \ + unsigned long *pulBaud, \ + unsigned long *pulConfig))ROM_UARTTABLE[6]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_UARTEnable \ + ((void (*)(unsigned long ulBase))ROM_UARTTABLE[7]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_UARTDisable \ + ((void (*)(unsigned long ulBase))ROM_UARTTABLE[8]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_UARTEnableSIR \ + ((void (*)(unsigned long ulBase, \ + tBoolean bLowPower))ROM_UARTTABLE[9]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_UARTDisableSIR \ + ((void (*)(unsigned long ulBase))ROM_UARTTABLE[10]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_UARTCharsAvail \ + ((tBoolean (*)(unsigned long ulBase))ROM_UARTTABLE[11]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_UARTSpaceAvail \ + ((tBoolean (*)(unsigned long ulBase))ROM_UARTTABLE[12]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_UARTCharGetNonBlocking \ + ((long (*)(unsigned long ulBase))ROM_UARTTABLE[13]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_UARTCharGet \ + ((long (*)(unsigned long ulBase))ROM_UARTTABLE[14]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_UARTCharPutNonBlocking \ + ((tBoolean (*)(unsigned long ulBase, \ + unsigned char ucData))ROM_UARTTABLE[15]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_UARTBreakCtl \ + ((void (*)(unsigned long ulBase, \ + tBoolean bBreakState))ROM_UARTTABLE[16]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_UARTIntEnable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulIntFlags))ROM_UARTTABLE[17]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_UARTIntDisable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulIntFlags))ROM_UARTTABLE[18]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_UARTIntStatus \ + ((unsigned long (*)(unsigned long ulBase, \ + tBoolean bMasked))ROM_UARTTABLE[19]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_UARTIntClear \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulIntFlags))ROM_UARTTABLE[20]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_UpdateUART \ + ((void (*)(void))ROM_UARTTABLE[21]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_UARTDMAEnable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulDMAFlags))ROM_UARTTABLE[22]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_UARTDMADisable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulDMAFlags))ROM_UARTTABLE[23]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_UARTFIFOEnable \ + ((void (*)(unsigned long ulBase))ROM_UARTTABLE[24]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_UARTFIFODisable \ + ((void (*)(unsigned long ulBase))ROM_UARTTABLE[25]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_UARTBusy \ + ((tBoolean (*)(unsigned long ulBase))ROM_UARTTABLE[26]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_UARTTxIntModeSet \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulMode))ROM_UARTTABLE[27]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_UARTTxIntModeGet \ + ((unsigned long (*)(unsigned long ulBase))ROM_UARTTABLE[28]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_UARTRxErrorGet \ + ((unsigned long (*)(unsigned long ulBase))ROM_UARTTABLE[29]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_UARTRxErrorClear \ + ((void (*)(unsigned long ulBase))ROM_UARTTABLE[30]) +#endif + +//***************************************************************************** +// +// Macros for calling ROM functions in the uDMA API. +// +//***************************************************************************** +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_uDMAChannelTransferSet \ + ((void (*)(unsigned long ulChannel, \ + unsigned long ulMode, \ + void *pvSrcAddr, \ + void *pvDstAddr, \ + unsigned long ulTransferSize))ROM_UDMATABLE[0]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_uDMAEnable \ + ((void (*)(void))ROM_UDMATABLE[1]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_uDMADisable \ + ((void (*)(void))ROM_UDMATABLE[2]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_uDMAErrorStatusGet \ + ((unsigned long (*)(void))ROM_UDMATABLE[3]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_uDMAErrorStatusClear \ + ((void (*)(void))ROM_UDMATABLE[4]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_uDMAChannelEnable \ + ((void (*)(unsigned long ulChannel))ROM_UDMATABLE[5]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_uDMAChannelDisable \ + ((void (*)(unsigned long ulChannel))ROM_UDMATABLE[6]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_uDMAChannelIsEnabled \ + ((tBoolean (*)(unsigned long ulChannel))ROM_UDMATABLE[7]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_uDMAControlBaseSet \ + ((void (*)(void *pControlTable))ROM_UDMATABLE[8]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_uDMAControlBaseGet \ + ((void * (*)(void))ROM_UDMATABLE[9]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_uDMAChannelRequest \ + ((void (*)(unsigned long ulChannel))ROM_UDMATABLE[10]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_uDMAChannelAttributeEnable \ + ((void (*)(unsigned long ulChannel, \ + unsigned long ulAttr))ROM_UDMATABLE[11]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_uDMAChannelAttributeDisable \ + ((void (*)(unsigned long ulChannel, \ + unsigned long ulAttr))ROM_UDMATABLE[12]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_uDMAChannelAttributeGet \ + ((unsigned long (*)(unsigned long ulChannel))ROM_UDMATABLE[13]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_uDMAChannelControlSet \ + ((void (*)(unsigned long ulChannel, \ + unsigned long ulControl))ROM_UDMATABLE[14]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_uDMAChannelSizeGet \ + ((unsigned long (*)(unsigned long ulChannel))ROM_UDMATABLE[15]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_uDMAChannelModeGet \ + ((unsigned long (*)(unsigned long ulChannel))ROM_UDMATABLE[16]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_uDMAChannelSelectSecondary \ + ((void (*)(unsigned long ulSecPeriphs))ROM_UDMATABLE[17]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_uDMAChannelSelectDefault \ + ((void (*)(unsigned long ulDefPeriphs))ROM_UDMATABLE[18]) +#endif + +//***************************************************************************** +// +// Macros for calling ROM functions in the USB API. +// +//***************************************************************************** +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBIntStatus \ + ((unsigned long (*)(unsigned long ulBase))ROM_USBTABLE[0]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBDevAddrGet \ + ((unsigned long (*)(unsigned long ulBase))ROM_USBTABLE[1]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBDevAddrSet \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulAddress))ROM_USBTABLE[2]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBDevConnect \ + ((void (*)(unsigned long ulBase))ROM_USBTABLE[3]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBDevDisconnect \ + ((void (*)(unsigned long ulBase))ROM_USBTABLE[4]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBDevEndpointConfigSet \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulEndpoint, \ + unsigned long ulMaxPacketSize, \ + unsigned long ulFlags))ROM_USBTABLE[5]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBDevEndpointDataAck \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulEndpoint, \ + tBoolean bIsLastPacket))ROM_USBTABLE[6]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBDevEndpointStall \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulEndpoint, \ + unsigned long ulFlags))ROM_USBTABLE[7]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBDevEndpointStallClear \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulEndpoint, \ + unsigned long ulFlags))ROM_USBTABLE[8]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBDevEndpointStatusClear \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulEndpoint, \ + unsigned long ulFlags))ROM_USBTABLE[9]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBEndpointDataGet \ + ((long (*)(unsigned long ulBase, \ + unsigned long ulEndpoint, \ + unsigned char *pucData, \ + unsigned long *pulSize))ROM_USBTABLE[10]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBEndpointDataPut \ + ((long (*)(unsigned long ulBase, \ + unsigned long ulEndpoint, \ + unsigned char *pucData, \ + unsigned long ulSize))ROM_USBTABLE[11]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBEndpointDataSend \ + ((long (*)(unsigned long ulBase, \ + unsigned long ulEndpoint, \ + unsigned long ulTransType))ROM_USBTABLE[12]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBEndpointDataToggleClear \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulEndpoint, \ + unsigned long ulFlags))ROM_USBTABLE[13]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBEndpointStatus \ + ((unsigned long (*)(unsigned long ulBase, \ + unsigned long ulEndpoint))ROM_USBTABLE[14]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBFIFOAddrGet \ + ((unsigned long (*)(unsigned long ulBase, \ + unsigned long ulEndpoint))ROM_USBTABLE[15]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBFIFOConfigGet \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulEndpoint, \ + unsigned long *pulFIFOAddress, \ + unsigned long *pulFIFOSize, \ + unsigned long ulFlags))ROM_USBTABLE[16]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBFIFOConfigSet \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulEndpoint, \ + unsigned long ulFIFOAddress, \ + unsigned long ulFIFOSize, \ + unsigned long ulFlags))ROM_USBTABLE[17]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBFIFOFlush \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulEndpoint, \ + unsigned long ulFlags))ROM_USBTABLE[18]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBFrameNumberGet \ + ((unsigned long (*)(unsigned long ulBase))ROM_USBTABLE[19]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBHostAddrGet \ + ((unsigned long (*)(unsigned long ulBase, \ + unsigned long ulEndpoint, \ + unsigned long ulFlags))ROM_USBTABLE[20]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBHostAddrSet \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulEndpoint, \ + unsigned long ulAddr, \ + unsigned long ulFlags))ROM_USBTABLE[21]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBHostEndpointConfig \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulEndpoint, \ + unsigned long ulMaxPacketSize, \ + unsigned long ulNAKPollInterval, \ + unsigned long ulTargetEndpoint, \ + unsigned long ulFlags))ROM_USBTABLE[22]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBHostEndpointDataAck \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulEndpoint))ROM_USBTABLE[23]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBHostEndpointDataToggle \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulEndpoint, \ + tBoolean bDataToggle, \ + unsigned long ulFlags))ROM_USBTABLE[24]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBHostEndpointStatusClear \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulEndpoint, \ + unsigned long ulFlags))ROM_USBTABLE[25]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBHostHubAddrGet \ + ((unsigned long (*)(unsigned long ulBase, \ + unsigned long ulEndpoint, \ + unsigned long ulFlags))ROM_USBTABLE[26]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBHostHubAddrSet \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulEndpoint, \ + unsigned long ulAddr, \ + unsigned long ulFlags))ROM_USBTABLE[27]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBHostPwrDisable \ + ((void (*)(unsigned long ulBase))ROM_USBTABLE[28]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBHostPwrEnable \ + ((void (*)(unsigned long ulBase))ROM_USBTABLE[29]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBHostPwrConfig \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulFlags))ROM_USBTABLE[30]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBHostPwrFaultDisable \ + ((void (*)(unsigned long ulBase))ROM_USBTABLE[31]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBHostPwrFaultEnable \ + ((void (*)(unsigned long ulBase))ROM_USBTABLE[32]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBHostRequestIN \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulEndpoint))ROM_USBTABLE[33]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBHostRequestStatus \ + ((void (*)(unsigned long ulBase))ROM_USBTABLE[34]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBHostReset \ + ((void (*)(unsigned long ulBase, \ + tBoolean bStart))ROM_USBTABLE[35]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBHostResume \ + ((void (*)(unsigned long ulBase, \ + tBoolean bStart))ROM_USBTABLE[36]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBHostSpeedGet \ + ((unsigned long (*)(unsigned long ulBase))ROM_USBTABLE[37]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBHostSuspend \ + ((void (*)(unsigned long ulBase))ROM_USBTABLE[38]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBIntDisable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulIntFlags))ROM_USBTABLE[39]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBIntEnable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulIntFlags))ROM_USBTABLE[40]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBDevEndpointConfigGet \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulEndpoint, \ + unsigned long *pulMaxPacketSize, \ + unsigned long *pulFlags))ROM_USBTABLE[41]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBEndpointDMAEnable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulEndpoint, \ + unsigned long ulFlags))ROM_USBTABLE[42]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBEndpointDMADisable \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulEndpoint, \ + unsigned long ulFlags))ROM_USBTABLE[43]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBEndpointDataAvail \ + ((unsigned long (*)(unsigned long ulBase, \ + unsigned long ulEndpoint))ROM_USBTABLE[44]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBOTGHostRequest \ + ((void (*)(unsigned long ulBase, \ + tBoolean bHNP))ROM_USBTABLE[45]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBModeGet \ + ((unsigned long (*)(unsigned long ulBase))ROM_USBTABLE[46]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBEndpointDMAChannel \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulEndpoint, \ + unsigned long ulChannel))ROM_USBTABLE[47]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBIntDisableControl \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulIntFlags))ROM_USBTABLE[48]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBIntEnableControl \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulIntFlags))ROM_USBTABLE[49]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBIntStatusControl \ + ((unsigned long (*)(unsigned long ulBase))ROM_USBTABLE[50]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBIntDisableEndpoint \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulIntFlags))ROM_USBTABLE[51]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBIntEnableEndpoint \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulIntFlags))ROM_USBTABLE[52]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBIntStatusEndpoint \ + ((unsigned long (*)(unsigned long ulBase))ROM_USBTABLE[53]) +#endif +#if defined(TARGET_IS_TEMPEST_RC1) +#define ROM_USBHostMode \ + ((void (*)(unsigned long ulBase))ROM_USBTABLE[54]) +#endif + +//***************************************************************************** +// +// Macros for calling ROM functions in the Watchdog API. +// +//***************************************************************************** +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_WatchdogIntClear \ + ((void (*)(unsigned long ulBase))ROM_WATCHDOGTABLE[0]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_WatchdogRunning \ + ((tBoolean (*)(unsigned long ulBase))ROM_WATCHDOGTABLE[1]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_WatchdogEnable \ + ((void (*)(unsigned long ulBase))ROM_WATCHDOGTABLE[2]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_WatchdogResetEnable \ + ((void (*)(unsigned long ulBase))ROM_WATCHDOGTABLE[3]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_WatchdogResetDisable \ + ((void (*)(unsigned long ulBase))ROM_WATCHDOGTABLE[4]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_WatchdogLock \ + ((void (*)(unsigned long ulBase))ROM_WATCHDOGTABLE[5]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_WatchdogUnlock \ + ((void (*)(unsigned long ulBase))ROM_WATCHDOGTABLE[6]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_WatchdogLockState \ + ((tBoolean (*)(unsigned long ulBase))ROM_WATCHDOGTABLE[7]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_WatchdogReloadSet \ + ((void (*)(unsigned long ulBase, \ + unsigned long ulLoadVal))ROM_WATCHDOGTABLE[8]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_WatchdogReloadGet \ + ((unsigned long (*)(unsigned long ulBase))ROM_WATCHDOGTABLE[9]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_WatchdogValueGet \ + ((unsigned long (*)(unsigned long ulBase))ROM_WATCHDOGTABLE[10]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_WatchdogIntEnable \ + ((void (*)(unsigned long ulBase))ROM_WATCHDOGTABLE[11]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_WatchdogIntStatus \ + ((unsigned long (*)(unsigned long ulBase, \ + tBoolean bMasked))ROM_WATCHDOGTABLE[12]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_WatchdogStallEnable \ + ((void (*)(unsigned long ulBase))ROM_WATCHDOGTABLE[13]) +#endif +#if defined(TARGET_IS_DUSTDEVIL_RA0) || \ + defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_WatchdogStallDisable \ + ((void (*)(unsigned long ulBase))ROM_WATCHDOGTABLE[14]) +#endif + +//***************************************************************************** +// +// Macros for calling ROM functions in the Software API. +// +//***************************************************************************** +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_Crc16Array \ + ((unsigned short (*)(unsigned long ulWordLen, \ + unsigned long *pulData))ROM_SOFTWARETABLE[1]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_Crc16Array3 \ + ((void (*)(unsigned long ulWordLen, \ + unsigned long *pulData, \ + unsigned short *pusCrc3))ROM_SOFTWARETABLE[2]) +#endif +#if defined(TARGET_IS_TEMPEST_RB1) || \ + defined(TARGET_IS_TEMPEST_RC1) +#define ROM_pvAESTable \ + ((void *)&(ROM_SOFTWARETABLE[7])) +#endif + +//***************************************************************************** +// +// Deprecated ROM functions. +// +//***************************************************************************** +#ifndef DEPRECATED +#ifdef ROM_FlashIntStatus +#define ROM_FlashIntGetStatus \ + ROM_FlashIntStatus +#endif +#ifdef ROM_USBDevEndpointConfigSet +#define ROM_USBDevEndpointConfig \ + ROM_USBDevEndpointConfigSet +#endif +#ifdef ROM_USBHostPwrConfig +#define ROM_USBHostPwrFaultConfig \ + ROM_USBHostPwrConfig +#endif +#endif + +#endif // __ROM_H__ diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/rom_map.h b/bsp/lm3s_9b9x/Libraries/driverlib/rom_map.h new file mode 100644 index 0000000000000000000000000000000000000000..816292c4e0510ff38b0d97f2323095a4c7d61d68 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/rom_map.h @@ -0,0 +1,3416 @@ +//***************************************************************************** +// +// rom_map.h - Macros to facilitate calling functions in the ROM when they are +// available and in flash otherwise. +// +// Copyright (c) 2008-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +#ifndef __ROM_MAP_H__ +#define __ROM_MAP_H__ + +//***************************************************************************** +// +// Macros for the ADC API. +// +//***************************************************************************** +#ifdef ROM_ADCSequenceDataGet +#define MAP_ADCSequenceDataGet \ + ROM_ADCSequenceDataGet +#else +#define MAP_ADCSequenceDataGet \ + ADCSequenceDataGet +#endif +#ifdef ROM_ADCIntDisable +#define MAP_ADCIntDisable \ + ROM_ADCIntDisable +#else +#define MAP_ADCIntDisable \ + ADCIntDisable +#endif +#ifdef ROM_ADCIntEnable +#define MAP_ADCIntEnable \ + ROM_ADCIntEnable +#else +#define MAP_ADCIntEnable \ + ADCIntEnable +#endif +#ifdef ROM_ADCIntStatus +#define MAP_ADCIntStatus \ + ROM_ADCIntStatus +#else +#define MAP_ADCIntStatus \ + ADCIntStatus +#endif +#ifdef ROM_ADCIntClear +#define MAP_ADCIntClear \ + ROM_ADCIntClear +#else +#define MAP_ADCIntClear \ + ADCIntClear +#endif +#ifdef ROM_ADCSequenceEnable +#define MAP_ADCSequenceEnable \ + ROM_ADCSequenceEnable +#else +#define MAP_ADCSequenceEnable \ + ADCSequenceEnable +#endif +#ifdef ROM_ADCSequenceDisable +#define MAP_ADCSequenceDisable \ + ROM_ADCSequenceDisable +#else +#define MAP_ADCSequenceDisable \ + ADCSequenceDisable +#endif +#ifdef ROM_ADCSequenceConfigure +#define MAP_ADCSequenceConfigure \ + ROM_ADCSequenceConfigure +#else +#define MAP_ADCSequenceConfigure \ + ADCSequenceConfigure +#endif +#ifdef ROM_ADCSequenceStepConfigure +#define MAP_ADCSequenceStepConfigure \ + ROM_ADCSequenceStepConfigure +#else +#define MAP_ADCSequenceStepConfigure \ + ADCSequenceStepConfigure +#endif +#ifdef ROM_ADCSequenceOverflow +#define MAP_ADCSequenceOverflow \ + ROM_ADCSequenceOverflow +#else +#define MAP_ADCSequenceOverflow \ + ADCSequenceOverflow +#endif +#ifdef ROM_ADCSequenceOverflowClear +#define MAP_ADCSequenceOverflowClear \ + ROM_ADCSequenceOverflowClear +#else +#define MAP_ADCSequenceOverflowClear \ + ADCSequenceOverflowClear +#endif +#ifdef ROM_ADCSequenceUnderflow +#define MAP_ADCSequenceUnderflow \ + ROM_ADCSequenceUnderflow +#else +#define MAP_ADCSequenceUnderflow \ + ADCSequenceUnderflow +#endif +#ifdef ROM_ADCSequenceUnderflowClear +#define MAP_ADCSequenceUnderflowClear \ + ROM_ADCSequenceUnderflowClear +#else +#define MAP_ADCSequenceUnderflowClear \ + ADCSequenceUnderflowClear +#endif +#ifdef ROM_ADCProcessorTrigger +#define MAP_ADCProcessorTrigger \ + ROM_ADCProcessorTrigger +#else +#define MAP_ADCProcessorTrigger \ + ADCProcessorTrigger +#endif +#ifdef ROM_ADCHardwareOversampleConfigure +#define MAP_ADCHardwareOversampleConfigure \ + ROM_ADCHardwareOversampleConfigure +#else +#define MAP_ADCHardwareOversampleConfigure \ + ADCHardwareOversampleConfigure +#endif +#ifdef ROM_ADCComparatorConfigure +#define MAP_ADCComparatorConfigure \ + ROM_ADCComparatorConfigure +#else +#define MAP_ADCComparatorConfigure \ + ADCComparatorConfigure +#endif +#ifdef ROM_ADCComparatorRegionSet +#define MAP_ADCComparatorRegionSet \ + ROM_ADCComparatorRegionSet +#else +#define MAP_ADCComparatorRegionSet \ + ADCComparatorRegionSet +#endif +#ifdef ROM_ADCComparatorReset +#define MAP_ADCComparatorReset \ + ROM_ADCComparatorReset +#else +#define MAP_ADCComparatorReset \ + ADCComparatorReset +#endif +#ifdef ROM_ADCComparatorIntDisable +#define MAP_ADCComparatorIntDisable \ + ROM_ADCComparatorIntDisable +#else +#define MAP_ADCComparatorIntDisable \ + ADCComparatorIntDisable +#endif +#ifdef ROM_ADCComparatorIntEnable +#define MAP_ADCComparatorIntEnable \ + ROM_ADCComparatorIntEnable +#else +#define MAP_ADCComparatorIntEnable \ + ADCComparatorIntEnable +#endif +#ifdef ROM_ADCComparatorIntStatus +#define MAP_ADCComparatorIntStatus \ + ROM_ADCComparatorIntStatus +#else +#define MAP_ADCComparatorIntStatus \ + ADCComparatorIntStatus +#endif +#ifdef ROM_ADCComparatorIntClear +#define MAP_ADCComparatorIntClear \ + ROM_ADCComparatorIntClear +#else +#define MAP_ADCComparatorIntClear \ + ADCComparatorIntClear +#endif + +//***************************************************************************** +// +// Macros for the CAN API. +// +//***************************************************************************** +#ifdef ROM_CANIntClear +#define MAP_CANIntClear \ + ROM_CANIntClear +#else +#define MAP_CANIntClear \ + CANIntClear +#endif +#ifdef ROM_CANInit +#define MAP_CANInit \ + ROM_CANInit +#else +#define MAP_CANInit \ + CANInit +#endif +#ifdef ROM_CANEnable +#define MAP_CANEnable \ + ROM_CANEnable +#else +#define MAP_CANEnable \ + CANEnable +#endif +#ifdef ROM_CANDisable +#define MAP_CANDisable \ + ROM_CANDisable +#else +#define MAP_CANDisable \ + CANDisable +#endif +#ifdef ROM_CANBitTimingSet +#define MAP_CANBitTimingSet \ + ROM_CANBitTimingSet +#else +#define MAP_CANBitTimingSet \ + CANBitTimingSet +#endif +#ifdef ROM_CANBitTimingGet +#define MAP_CANBitTimingGet \ + ROM_CANBitTimingGet +#else +#define MAP_CANBitTimingGet \ + CANBitTimingGet +#endif +#ifdef ROM_CANMessageSet +#define MAP_CANMessageSet \ + ROM_CANMessageSet +#else +#define MAP_CANMessageSet \ + CANMessageSet +#endif +#ifdef ROM_CANMessageGet +#define MAP_CANMessageGet \ + ROM_CANMessageGet +#else +#define MAP_CANMessageGet \ + CANMessageGet +#endif +#ifdef ROM_CANStatusGet +#define MAP_CANStatusGet \ + ROM_CANStatusGet +#else +#define MAP_CANStatusGet \ + CANStatusGet +#endif +#ifdef ROM_CANMessageClear +#define MAP_CANMessageClear \ + ROM_CANMessageClear +#else +#define MAP_CANMessageClear \ + CANMessageClear +#endif +#ifdef ROM_CANIntEnable +#define MAP_CANIntEnable \ + ROM_CANIntEnable +#else +#define MAP_CANIntEnable \ + CANIntEnable +#endif +#ifdef ROM_CANIntDisable +#define MAP_CANIntDisable \ + ROM_CANIntDisable +#else +#define MAP_CANIntDisable \ + CANIntDisable +#endif +#ifdef ROM_CANIntStatus +#define MAP_CANIntStatus \ + ROM_CANIntStatus +#else +#define MAP_CANIntStatus \ + CANIntStatus +#endif +#ifdef ROM_CANRetryGet +#define MAP_CANRetryGet \ + ROM_CANRetryGet +#else +#define MAP_CANRetryGet \ + CANRetryGet +#endif +#ifdef ROM_CANRetrySet +#define MAP_CANRetrySet \ + ROM_CANRetrySet +#else +#define MAP_CANRetrySet \ + CANRetrySet +#endif +#ifdef ROM_CANErrCntrGet +#define MAP_CANErrCntrGet \ + ROM_CANErrCntrGet +#else +#define MAP_CANErrCntrGet \ + CANErrCntrGet +#endif +#ifdef ROM_CANBitRateSet +#define MAP_CANBitRateSet \ + ROM_CANBitRateSet +#else +#define MAP_CANBitRateSet \ + CANBitRateSet +#endif + +//***************************************************************************** +// +// Macros for the Comparator API. +// +//***************************************************************************** +#ifdef ROM_ComparatorIntClear +#define MAP_ComparatorIntClear \ + ROM_ComparatorIntClear +#else +#define MAP_ComparatorIntClear \ + ComparatorIntClear +#endif +#ifdef ROM_ComparatorConfigure +#define MAP_ComparatorConfigure \ + ROM_ComparatorConfigure +#else +#define MAP_ComparatorConfigure \ + ComparatorConfigure +#endif +#ifdef ROM_ComparatorRefSet +#define MAP_ComparatorRefSet \ + ROM_ComparatorRefSet +#else +#define MAP_ComparatorRefSet \ + ComparatorRefSet +#endif +#ifdef ROM_ComparatorValueGet +#define MAP_ComparatorValueGet \ + ROM_ComparatorValueGet +#else +#define MAP_ComparatorValueGet \ + ComparatorValueGet +#endif +#ifdef ROM_ComparatorIntEnable +#define MAP_ComparatorIntEnable \ + ROM_ComparatorIntEnable +#else +#define MAP_ComparatorIntEnable \ + ComparatorIntEnable +#endif +#ifdef ROM_ComparatorIntDisable +#define MAP_ComparatorIntDisable \ + ROM_ComparatorIntDisable +#else +#define MAP_ComparatorIntDisable \ + ComparatorIntDisable +#endif +#ifdef ROM_ComparatorIntStatus +#define MAP_ComparatorIntStatus \ + ROM_ComparatorIntStatus +#else +#define MAP_ComparatorIntStatus \ + ComparatorIntStatus +#endif + +//***************************************************************************** +// +// Macros for the Ethernet API. +// +//***************************************************************************** +#ifdef ROM_EPIIntStatus +#define MAP_EPIIntStatus \ + ROM_EPIIntStatus +#else +#define MAP_EPIIntStatus \ + EPIIntStatus +#endif +#ifdef ROM_EPIModeSet +#define MAP_EPIModeSet \ + ROM_EPIModeSet +#else +#define MAP_EPIModeSet \ + EPIModeSet +#endif +#ifdef ROM_EPIDividerSet +#define MAP_EPIDividerSet \ + ROM_EPIDividerSet +#else +#define MAP_EPIDividerSet \ + EPIDividerSet +#endif +#ifdef ROM_EPIConfigSDRAMSet +#define MAP_EPIConfigSDRAMSet \ + ROM_EPIConfigSDRAMSet +#else +#define MAP_EPIConfigSDRAMSet \ + EPIConfigSDRAMSet +#endif +#ifdef ROM_EPIConfigGPModeSet +#define MAP_EPIConfigGPModeSet \ + ROM_EPIConfigGPModeSet +#else +#define MAP_EPIConfigGPModeSet \ + EPIConfigGPModeSet +#endif +#ifdef ROM_EPIConfigHB8Set +#define MAP_EPIConfigHB8Set \ + ROM_EPIConfigHB8Set +#else +#define MAP_EPIConfigHB8Set \ + EPIConfigHB8Set +#endif +#ifdef ROM_EPIConfigHB16Set +#define MAP_EPIConfigHB16Set \ + ROM_EPIConfigHB16Set +#else +#define MAP_EPIConfigHB16Set \ + EPIConfigHB16Set +#endif +#ifdef ROM_EPIAddressMapSet +#define MAP_EPIAddressMapSet \ + ROM_EPIAddressMapSet +#else +#define MAP_EPIAddressMapSet \ + EPIAddressMapSet +#endif +#ifdef ROM_EPINonBlockingReadConfigure +#define MAP_EPINonBlockingReadConfigure \ + ROM_EPINonBlockingReadConfigure +#else +#define MAP_EPINonBlockingReadConfigure \ + EPINonBlockingReadConfigure +#endif +#ifdef ROM_EPINonBlockingReadStart +#define MAP_EPINonBlockingReadStart \ + ROM_EPINonBlockingReadStart +#else +#define MAP_EPINonBlockingReadStart \ + EPINonBlockingReadStart +#endif +#ifdef ROM_EPINonBlockingReadStop +#define MAP_EPINonBlockingReadStop \ + ROM_EPINonBlockingReadStop +#else +#define MAP_EPINonBlockingReadStop \ + EPINonBlockingReadStop +#endif +#ifdef ROM_EPINonBlockingReadCount +#define MAP_EPINonBlockingReadCount \ + ROM_EPINonBlockingReadCount +#else +#define MAP_EPINonBlockingReadCount \ + EPINonBlockingReadCount +#endif +#ifdef ROM_EPINonBlockingReadAvail +#define MAP_EPINonBlockingReadAvail \ + ROM_EPINonBlockingReadAvail +#else +#define MAP_EPINonBlockingReadAvail \ + EPINonBlockingReadAvail +#endif +#ifdef ROM_EPINonBlockingReadGet32 +#define MAP_EPINonBlockingReadGet32 \ + ROM_EPINonBlockingReadGet32 +#else +#define MAP_EPINonBlockingReadGet32 \ + EPINonBlockingReadGet32 +#endif +#ifdef ROM_EPINonBlockingReadGet16 +#define MAP_EPINonBlockingReadGet16 \ + ROM_EPINonBlockingReadGet16 +#else +#define MAP_EPINonBlockingReadGet16 \ + EPINonBlockingReadGet16 +#endif +#ifdef ROM_EPINonBlockingReadGet8 +#define MAP_EPINonBlockingReadGet8 \ + ROM_EPINonBlockingReadGet8 +#else +#define MAP_EPINonBlockingReadGet8 \ + EPINonBlockingReadGet8 +#endif +#ifdef ROM_EPIFIFOConfig +#define MAP_EPIFIFOConfig \ + ROM_EPIFIFOConfig +#else +#define MAP_EPIFIFOConfig \ + EPIFIFOConfig +#endif +#ifdef ROM_EPIWriteFIFOCountGet +#define MAP_EPIWriteFIFOCountGet \ + ROM_EPIWriteFIFOCountGet +#else +#define MAP_EPIWriteFIFOCountGet \ + EPIWriteFIFOCountGet +#endif +#ifdef ROM_EPIIntEnable +#define MAP_EPIIntEnable \ + ROM_EPIIntEnable +#else +#define MAP_EPIIntEnable \ + EPIIntEnable +#endif +#ifdef ROM_EPIIntDisable +#define MAP_EPIIntDisable \ + ROM_EPIIntDisable +#else +#define MAP_EPIIntDisable \ + EPIIntDisable +#endif +#ifdef ROM_EPIIntErrorStatus +#define MAP_EPIIntErrorStatus \ + ROM_EPIIntErrorStatus +#else +#define MAP_EPIIntErrorStatus \ + EPIIntErrorStatus +#endif +#ifdef ROM_EPIIntErrorClear +#define MAP_EPIIntErrorClear \ + ROM_EPIIntErrorClear +#else +#define MAP_EPIIntErrorClear \ + EPIIntErrorClear +#endif + +//***************************************************************************** +// +// Macros for the Ethernet API. +// +//***************************************************************************** +#ifdef ROM_EthernetIntClear +#define MAP_EthernetIntClear \ + ROM_EthernetIntClear +#else +#define MAP_EthernetIntClear \ + EthernetIntClear +#endif +#ifdef ROM_EthernetInitExpClk +#define MAP_EthernetInitExpClk \ + ROM_EthernetInitExpClk +#else +#define MAP_EthernetInitExpClk \ + EthernetInitExpClk +#endif +#ifdef ROM_EthernetConfigSet +#define MAP_EthernetConfigSet \ + ROM_EthernetConfigSet +#else +#define MAP_EthernetConfigSet \ + EthernetConfigSet +#endif +#ifdef ROM_EthernetConfigGet +#define MAP_EthernetConfigGet \ + ROM_EthernetConfigGet +#else +#define MAP_EthernetConfigGet \ + EthernetConfigGet +#endif +#ifdef ROM_EthernetMACAddrSet +#define MAP_EthernetMACAddrSet \ + ROM_EthernetMACAddrSet +#else +#define MAP_EthernetMACAddrSet \ + EthernetMACAddrSet +#endif +#ifdef ROM_EthernetMACAddrGet +#define MAP_EthernetMACAddrGet \ + ROM_EthernetMACAddrGet +#else +#define MAP_EthernetMACAddrGet \ + EthernetMACAddrGet +#endif +#ifdef ROM_EthernetEnable +#define MAP_EthernetEnable \ + ROM_EthernetEnable +#else +#define MAP_EthernetEnable \ + EthernetEnable +#endif +#ifdef ROM_EthernetDisable +#define MAP_EthernetDisable \ + ROM_EthernetDisable +#else +#define MAP_EthernetDisable \ + EthernetDisable +#endif +#ifdef ROM_EthernetPacketAvail +#define MAP_EthernetPacketAvail \ + ROM_EthernetPacketAvail +#else +#define MAP_EthernetPacketAvail \ + EthernetPacketAvail +#endif +#ifdef ROM_EthernetSpaceAvail +#define MAP_EthernetSpaceAvail \ + ROM_EthernetSpaceAvail +#else +#define MAP_EthernetSpaceAvail \ + EthernetSpaceAvail +#endif +#ifdef ROM_EthernetPacketGetNonBlocking +#define MAP_EthernetPacketGetNonBlocking \ + ROM_EthernetPacketGetNonBlocking +#else +#define MAP_EthernetPacketGetNonBlocking \ + EthernetPacketGetNonBlocking +#endif +#ifdef ROM_EthernetPacketGet +#define MAP_EthernetPacketGet \ + ROM_EthernetPacketGet +#else +#define MAP_EthernetPacketGet \ + EthernetPacketGet +#endif +#ifdef ROM_EthernetPacketPutNonBlocking +#define MAP_EthernetPacketPutNonBlocking \ + ROM_EthernetPacketPutNonBlocking +#else +#define MAP_EthernetPacketPutNonBlocking \ + EthernetPacketPutNonBlocking +#endif +#ifdef ROM_EthernetPacketPut +#define MAP_EthernetPacketPut \ + ROM_EthernetPacketPut +#else +#define MAP_EthernetPacketPut \ + EthernetPacketPut +#endif +#ifdef ROM_EthernetIntEnable +#define MAP_EthernetIntEnable \ + ROM_EthernetIntEnable +#else +#define MAP_EthernetIntEnable \ + EthernetIntEnable +#endif +#ifdef ROM_EthernetIntDisable +#define MAP_EthernetIntDisable \ + ROM_EthernetIntDisable +#else +#define MAP_EthernetIntDisable \ + EthernetIntDisable +#endif +#ifdef ROM_EthernetIntStatus +#define MAP_EthernetIntStatus \ + ROM_EthernetIntStatus +#else +#define MAP_EthernetIntStatus \ + EthernetIntStatus +#endif +#ifdef ROM_EthernetPHYWrite +#define MAP_EthernetPHYWrite \ + ROM_EthernetPHYWrite +#else +#define MAP_EthernetPHYWrite \ + EthernetPHYWrite +#endif +#ifdef ROM_EthernetPHYRead +#define MAP_EthernetPHYRead \ + ROM_EthernetPHYRead +#else +#define MAP_EthernetPHYRead \ + EthernetPHYRead +#endif + +//***************************************************************************** +// +// Macros for the Flash API. +// +//***************************************************************************** +#ifdef ROM_FlashProgram +#define MAP_FlashProgram \ + ROM_FlashProgram +#else +#define MAP_FlashProgram \ + FlashProgram +#endif +#ifdef ROM_FlashUsecGet +#define MAP_FlashUsecGet \ + ROM_FlashUsecGet +#else +#define MAP_FlashUsecGet \ + FlashUsecGet +#endif +#ifdef ROM_FlashUsecSet +#define MAP_FlashUsecSet \ + ROM_FlashUsecSet +#else +#define MAP_FlashUsecSet \ + FlashUsecSet +#endif +#ifdef ROM_FlashErase +#define MAP_FlashErase \ + ROM_FlashErase +#else +#define MAP_FlashErase \ + FlashErase +#endif +#ifdef ROM_FlashProtectGet +#define MAP_FlashProtectGet \ + ROM_FlashProtectGet +#else +#define MAP_FlashProtectGet \ + FlashProtectGet +#endif +#ifdef ROM_FlashProtectSet +#define MAP_FlashProtectSet \ + ROM_FlashProtectSet +#else +#define MAP_FlashProtectSet \ + FlashProtectSet +#endif +#ifdef ROM_FlashProtectSave +#define MAP_FlashProtectSave \ + ROM_FlashProtectSave +#else +#define MAP_FlashProtectSave \ + FlashProtectSave +#endif +#ifdef ROM_FlashUserGet +#define MAP_FlashUserGet \ + ROM_FlashUserGet +#else +#define MAP_FlashUserGet \ + FlashUserGet +#endif +#ifdef ROM_FlashUserSet +#define MAP_FlashUserSet \ + ROM_FlashUserSet +#else +#define MAP_FlashUserSet \ + FlashUserSet +#endif +#ifdef ROM_FlashUserSave +#define MAP_FlashUserSave \ + ROM_FlashUserSave +#else +#define MAP_FlashUserSave \ + FlashUserSave +#endif +#ifdef ROM_FlashIntEnable +#define MAP_FlashIntEnable \ + ROM_FlashIntEnable +#else +#define MAP_FlashIntEnable \ + FlashIntEnable +#endif +#ifdef ROM_FlashIntDisable +#define MAP_FlashIntDisable \ + ROM_FlashIntDisable +#else +#define MAP_FlashIntDisable \ + FlashIntDisable +#endif +#ifdef ROM_FlashIntStatus +#define MAP_FlashIntStatus \ + ROM_FlashIntStatus +#else +#define MAP_FlashIntStatus \ + FlashIntStatus +#endif +#ifdef ROM_FlashIntClear +#define MAP_FlashIntClear \ + ROM_FlashIntClear +#else +#define MAP_FlashIntClear \ + FlashIntClear +#endif + +//***************************************************************************** +// +// Macros for the GPIO API. +// +//***************************************************************************** +#ifdef ROM_GPIOPinWrite +#define MAP_GPIOPinWrite \ + ROM_GPIOPinWrite +#else +#define MAP_GPIOPinWrite \ + GPIOPinWrite +#endif +#ifdef ROM_GPIODirModeSet +#define MAP_GPIODirModeSet \ + ROM_GPIODirModeSet +#else +#define MAP_GPIODirModeSet \ + GPIODirModeSet +#endif +#ifdef ROM_GPIODirModeGet +#define MAP_GPIODirModeGet \ + ROM_GPIODirModeGet +#else +#define MAP_GPIODirModeGet \ + GPIODirModeGet +#endif +#ifdef ROM_GPIOIntTypeSet +#define MAP_GPIOIntTypeSet \ + ROM_GPIOIntTypeSet +#else +#define MAP_GPIOIntTypeSet \ + GPIOIntTypeSet +#endif +#ifdef ROM_GPIOIntTypeGet +#define MAP_GPIOIntTypeGet \ + ROM_GPIOIntTypeGet +#else +#define MAP_GPIOIntTypeGet \ + GPIOIntTypeGet +#endif +#ifdef ROM_GPIOPadConfigSet +#define MAP_GPIOPadConfigSet \ + ROM_GPIOPadConfigSet +#else +#define MAP_GPIOPadConfigSet \ + GPIOPadConfigSet +#endif +#ifdef ROM_GPIOPadConfigGet +#define MAP_GPIOPadConfigGet \ + ROM_GPIOPadConfigGet +#else +#define MAP_GPIOPadConfigGet \ + GPIOPadConfigGet +#endif +#ifdef ROM_GPIOPinIntEnable +#define MAP_GPIOPinIntEnable \ + ROM_GPIOPinIntEnable +#else +#define MAP_GPIOPinIntEnable \ + GPIOPinIntEnable +#endif +#ifdef ROM_GPIOPinIntDisable +#define MAP_GPIOPinIntDisable \ + ROM_GPIOPinIntDisable +#else +#define MAP_GPIOPinIntDisable \ + GPIOPinIntDisable +#endif +#ifdef ROM_GPIOPinIntStatus +#define MAP_GPIOPinIntStatus \ + ROM_GPIOPinIntStatus +#else +#define MAP_GPIOPinIntStatus \ + GPIOPinIntStatus +#endif +#ifdef ROM_GPIOPinIntClear +#define MAP_GPIOPinIntClear \ + ROM_GPIOPinIntClear +#else +#define MAP_GPIOPinIntClear \ + GPIOPinIntClear +#endif +#ifdef ROM_GPIOPinRead +#define MAP_GPIOPinRead \ + ROM_GPIOPinRead +#else +#define MAP_GPIOPinRead \ + GPIOPinRead +#endif +#ifdef ROM_GPIOPinTypeCAN +#define MAP_GPIOPinTypeCAN \ + ROM_GPIOPinTypeCAN +#else +#define MAP_GPIOPinTypeCAN \ + GPIOPinTypeCAN +#endif +#ifdef ROM_GPIOPinTypeComparator +#define MAP_GPIOPinTypeComparator \ + ROM_GPIOPinTypeComparator +#else +#define MAP_GPIOPinTypeComparator \ + GPIOPinTypeComparator +#endif +#ifdef ROM_GPIOPinTypeGPIOInput +#define MAP_GPIOPinTypeGPIOInput \ + ROM_GPIOPinTypeGPIOInput +#else +#define MAP_GPIOPinTypeGPIOInput \ + GPIOPinTypeGPIOInput +#endif +#ifdef ROM_GPIOPinTypeGPIOOutput +#define MAP_GPIOPinTypeGPIOOutput \ + ROM_GPIOPinTypeGPIOOutput +#else +#define MAP_GPIOPinTypeGPIOOutput \ + GPIOPinTypeGPIOOutput +#endif +#ifdef ROM_GPIOPinTypeI2C +#define MAP_GPIOPinTypeI2C \ + ROM_GPIOPinTypeI2C +#else +#define MAP_GPIOPinTypeI2C \ + GPIOPinTypeI2C +#endif +#ifdef ROM_GPIOPinTypePWM +#define MAP_GPIOPinTypePWM \ + ROM_GPIOPinTypePWM +#else +#define MAP_GPIOPinTypePWM \ + GPIOPinTypePWM +#endif +#ifdef ROM_GPIOPinTypeQEI +#define MAP_GPIOPinTypeQEI \ + ROM_GPIOPinTypeQEI +#else +#define MAP_GPIOPinTypeQEI \ + GPIOPinTypeQEI +#endif +#ifdef ROM_GPIOPinTypeSSI +#define MAP_GPIOPinTypeSSI \ + ROM_GPIOPinTypeSSI +#else +#define MAP_GPIOPinTypeSSI \ + GPIOPinTypeSSI +#endif +#ifdef ROM_GPIOPinTypeTimer +#define MAP_GPIOPinTypeTimer \ + ROM_GPIOPinTypeTimer +#else +#define MAP_GPIOPinTypeTimer \ + GPIOPinTypeTimer +#endif +#ifdef ROM_GPIOPinTypeUART +#define MAP_GPIOPinTypeUART \ + ROM_GPIOPinTypeUART +#else +#define MAP_GPIOPinTypeUART \ + GPIOPinTypeUART +#endif +#ifdef ROM_GPIOPinTypeGPIOOutputOD +#define MAP_GPIOPinTypeGPIOOutputOD \ + ROM_GPIOPinTypeGPIOOutputOD +#else +#define MAP_GPIOPinTypeGPIOOutputOD \ + GPIOPinTypeGPIOOutputOD +#endif +#ifdef ROM_GPIOPinTypeADC +#define MAP_GPIOPinTypeADC \ + ROM_GPIOPinTypeADC +#else +#define MAP_GPIOPinTypeADC \ + GPIOPinTypeADC +#endif +#ifdef ROM_GPIOPinTypeUSBDigital +#define MAP_GPIOPinTypeUSBDigital \ + ROM_GPIOPinTypeUSBDigital +#else +#define MAP_GPIOPinTypeUSBDigital \ + GPIOPinTypeUSBDigital +#endif +#ifdef ROM_GPIOPinTypeI2S +#define MAP_GPIOPinTypeI2S \ + ROM_GPIOPinTypeI2S +#else +#define MAP_GPIOPinTypeI2S \ + GPIOPinTypeI2S +#endif +#ifdef ROM_GPIOPinConfigure +#define MAP_GPIOPinConfigure \ + ROM_GPIOPinConfigure +#else +#define MAP_GPIOPinConfigure \ + GPIOPinConfigure +#endif +#ifdef ROM_GPIOPinTypeEthernetLED +#define MAP_GPIOPinTypeEthernetLED \ + ROM_GPIOPinTypeEthernetLED +#else +#define MAP_GPIOPinTypeEthernetLED \ + GPIOPinTypeEthernetLED +#endif +#ifdef ROM_GPIOPinTypeUSBAnalog +#define MAP_GPIOPinTypeUSBAnalog \ + ROM_GPIOPinTypeUSBAnalog +#else +#define MAP_GPIOPinTypeUSBAnalog \ + GPIOPinTypeUSBAnalog +#endif + +//***************************************************************************** +// +// Macros for the Hibernate API. +// +//***************************************************************************** +#ifdef ROM_HibernateIntClear +#define MAP_HibernateIntClear \ + ROM_HibernateIntClear +#else +#define MAP_HibernateIntClear \ + HibernateIntClear +#endif +#ifdef ROM_HibernateEnableExpClk +#define MAP_HibernateEnableExpClk \ + ROM_HibernateEnableExpClk +#else +#define MAP_HibernateEnableExpClk \ + HibernateEnableExpClk +#endif +#ifdef ROM_HibernateDisable +#define MAP_HibernateDisable \ + ROM_HibernateDisable +#else +#define MAP_HibernateDisable \ + HibernateDisable +#endif +#ifdef ROM_HibernateClockSelect +#define MAP_HibernateClockSelect \ + ROM_HibernateClockSelect +#else +#define MAP_HibernateClockSelect \ + HibernateClockSelect +#endif +#ifdef ROM_HibernateRTCEnable +#define MAP_HibernateRTCEnable \ + ROM_HibernateRTCEnable +#else +#define MAP_HibernateRTCEnable \ + HibernateRTCEnable +#endif +#ifdef ROM_HibernateRTCDisable +#define MAP_HibernateRTCDisable \ + ROM_HibernateRTCDisable +#else +#define MAP_HibernateRTCDisable \ + HibernateRTCDisable +#endif +#ifdef ROM_HibernateWakeSet +#define MAP_HibernateWakeSet \ + ROM_HibernateWakeSet +#else +#define MAP_HibernateWakeSet \ + HibernateWakeSet +#endif +#ifdef ROM_HibernateWakeGet +#define MAP_HibernateWakeGet \ + ROM_HibernateWakeGet +#else +#define MAP_HibernateWakeGet \ + HibernateWakeGet +#endif +#ifdef ROM_HibernateLowBatSet +#define MAP_HibernateLowBatSet \ + ROM_HibernateLowBatSet +#else +#define MAP_HibernateLowBatSet \ + HibernateLowBatSet +#endif +#ifdef ROM_HibernateLowBatGet +#define MAP_HibernateLowBatGet \ + ROM_HibernateLowBatGet +#else +#define MAP_HibernateLowBatGet \ + HibernateLowBatGet +#endif +#ifdef ROM_HibernateRTCSet +#define MAP_HibernateRTCSet \ + ROM_HibernateRTCSet +#else +#define MAP_HibernateRTCSet \ + HibernateRTCSet +#endif +#ifdef ROM_HibernateRTCGet +#define MAP_HibernateRTCGet \ + ROM_HibernateRTCGet +#else +#define MAP_HibernateRTCGet \ + HibernateRTCGet +#endif +#ifdef ROM_HibernateRTCMatch0Set +#define MAP_HibernateRTCMatch0Set \ + ROM_HibernateRTCMatch0Set +#else +#define MAP_HibernateRTCMatch0Set \ + HibernateRTCMatch0Set +#endif +#ifdef ROM_HibernateRTCMatch0Get +#define MAP_HibernateRTCMatch0Get \ + ROM_HibernateRTCMatch0Get +#else +#define MAP_HibernateRTCMatch0Get \ + HibernateRTCMatch0Get +#endif +#ifdef ROM_HibernateRTCMatch1Set +#define MAP_HibernateRTCMatch1Set \ + ROM_HibernateRTCMatch1Set +#else +#define MAP_HibernateRTCMatch1Set \ + HibernateRTCMatch1Set +#endif +#ifdef ROM_HibernateRTCMatch1Get +#define MAP_HibernateRTCMatch1Get \ + ROM_HibernateRTCMatch1Get +#else +#define MAP_HibernateRTCMatch1Get \ + HibernateRTCMatch1Get +#endif +#ifdef ROM_HibernateRTCTrimSet +#define MAP_HibernateRTCTrimSet \ + ROM_HibernateRTCTrimSet +#else +#define MAP_HibernateRTCTrimSet \ + HibernateRTCTrimSet +#endif +#ifdef ROM_HibernateRTCTrimGet +#define MAP_HibernateRTCTrimGet \ + ROM_HibernateRTCTrimGet +#else +#define MAP_HibernateRTCTrimGet \ + HibernateRTCTrimGet +#endif +#ifdef ROM_HibernateDataSet +#define MAP_HibernateDataSet \ + ROM_HibernateDataSet +#else +#define MAP_HibernateDataSet \ + HibernateDataSet +#endif +#ifdef ROM_HibernateDataGet +#define MAP_HibernateDataGet \ + ROM_HibernateDataGet +#else +#define MAP_HibernateDataGet \ + HibernateDataGet +#endif +#ifdef ROM_HibernateRequest +#define MAP_HibernateRequest \ + ROM_HibernateRequest +#else +#define MAP_HibernateRequest \ + HibernateRequest +#endif +#ifdef ROM_HibernateIntEnable +#define MAP_HibernateIntEnable \ + ROM_HibernateIntEnable +#else +#define MAP_HibernateIntEnable \ + HibernateIntEnable +#endif +#ifdef ROM_HibernateIntDisable +#define MAP_HibernateIntDisable \ + ROM_HibernateIntDisable +#else +#define MAP_HibernateIntDisable \ + HibernateIntDisable +#endif +#ifdef ROM_HibernateIntStatus +#define MAP_HibernateIntStatus \ + ROM_HibernateIntStatus +#else +#define MAP_HibernateIntStatus \ + HibernateIntStatus +#endif +#ifdef ROM_HibernateIsActive +#define MAP_HibernateIsActive \ + ROM_HibernateIsActive +#else +#define MAP_HibernateIsActive \ + HibernateIsActive +#endif + +//***************************************************************************** +// +// Macros for the I2C API. +// +//***************************************************************************** +#ifdef ROM_I2CMasterDataPut +#define MAP_I2CMasterDataPut \ + ROM_I2CMasterDataPut +#else +#define MAP_I2CMasterDataPut \ + I2CMasterDataPut +#endif +#ifdef ROM_I2CMasterInitExpClk +#define MAP_I2CMasterInitExpClk \ + ROM_I2CMasterInitExpClk +#else +#define MAP_I2CMasterInitExpClk \ + I2CMasterInitExpClk +#endif +#ifdef ROM_I2CSlaveInit +#define MAP_I2CSlaveInit \ + ROM_I2CSlaveInit +#else +#define MAP_I2CSlaveInit \ + I2CSlaveInit +#endif +#ifdef ROM_I2CMasterEnable +#define MAP_I2CMasterEnable \ + ROM_I2CMasterEnable +#else +#define MAP_I2CMasterEnable \ + I2CMasterEnable +#endif +#ifdef ROM_I2CSlaveEnable +#define MAP_I2CSlaveEnable \ + ROM_I2CSlaveEnable +#else +#define MAP_I2CSlaveEnable \ + I2CSlaveEnable +#endif +#ifdef ROM_I2CMasterDisable +#define MAP_I2CMasterDisable \ + ROM_I2CMasterDisable +#else +#define MAP_I2CMasterDisable \ + I2CMasterDisable +#endif +#ifdef ROM_I2CSlaveDisable +#define MAP_I2CSlaveDisable \ + ROM_I2CSlaveDisable +#else +#define MAP_I2CSlaveDisable \ + I2CSlaveDisable +#endif +#ifdef ROM_I2CMasterIntEnable +#define MAP_I2CMasterIntEnable \ + ROM_I2CMasterIntEnable +#else +#define MAP_I2CMasterIntEnable \ + I2CMasterIntEnable +#endif +#ifdef ROM_I2CSlaveIntEnable +#define MAP_I2CSlaveIntEnable \ + ROM_I2CSlaveIntEnable +#else +#define MAP_I2CSlaveIntEnable \ + I2CSlaveIntEnable +#endif +#ifdef ROM_I2CMasterIntDisable +#define MAP_I2CMasterIntDisable \ + ROM_I2CMasterIntDisable +#else +#define MAP_I2CMasterIntDisable \ + I2CMasterIntDisable +#endif +#ifdef ROM_I2CSlaveIntDisable +#define MAP_I2CSlaveIntDisable \ + ROM_I2CSlaveIntDisable +#else +#define MAP_I2CSlaveIntDisable \ + I2CSlaveIntDisable +#endif +#ifdef ROM_I2CMasterIntStatus +#define MAP_I2CMasterIntStatus \ + ROM_I2CMasterIntStatus +#else +#define MAP_I2CMasterIntStatus \ + I2CMasterIntStatus +#endif +#ifdef ROM_I2CSlaveIntStatus +#define MAP_I2CSlaveIntStatus \ + ROM_I2CSlaveIntStatus +#else +#define MAP_I2CSlaveIntStatus \ + I2CSlaveIntStatus +#endif +#ifdef ROM_I2CMasterIntClear +#define MAP_I2CMasterIntClear \ + ROM_I2CMasterIntClear +#else +#define MAP_I2CMasterIntClear \ + I2CMasterIntClear +#endif +#ifdef ROM_I2CSlaveIntClear +#define MAP_I2CSlaveIntClear \ + ROM_I2CSlaveIntClear +#else +#define MAP_I2CSlaveIntClear \ + I2CSlaveIntClear +#endif +#ifdef ROM_I2CMasterSlaveAddrSet +#define MAP_I2CMasterSlaveAddrSet \ + ROM_I2CMasterSlaveAddrSet +#else +#define MAP_I2CMasterSlaveAddrSet \ + I2CMasterSlaveAddrSet +#endif +#ifdef ROM_I2CMasterBusy +#define MAP_I2CMasterBusy \ + ROM_I2CMasterBusy +#else +#define MAP_I2CMasterBusy \ + I2CMasterBusy +#endif +#ifdef ROM_I2CMasterBusBusy +#define MAP_I2CMasterBusBusy \ + ROM_I2CMasterBusBusy +#else +#define MAP_I2CMasterBusBusy \ + I2CMasterBusBusy +#endif +#ifdef ROM_I2CMasterControl +#define MAP_I2CMasterControl \ + ROM_I2CMasterControl +#else +#define MAP_I2CMasterControl \ + I2CMasterControl +#endif +#ifdef ROM_I2CMasterErr +#define MAP_I2CMasterErr \ + ROM_I2CMasterErr +#else +#define MAP_I2CMasterErr \ + I2CMasterErr +#endif +#ifdef ROM_I2CMasterDataGet +#define MAP_I2CMasterDataGet \ + ROM_I2CMasterDataGet +#else +#define MAP_I2CMasterDataGet \ + I2CMasterDataGet +#endif +#ifdef ROM_I2CSlaveStatus +#define MAP_I2CSlaveStatus \ + ROM_I2CSlaveStatus +#else +#define MAP_I2CSlaveStatus \ + I2CSlaveStatus +#endif +#ifdef ROM_I2CSlaveDataPut +#define MAP_I2CSlaveDataPut \ + ROM_I2CSlaveDataPut +#else +#define MAP_I2CSlaveDataPut \ + I2CSlaveDataPut +#endif +#ifdef ROM_I2CSlaveDataGet +#define MAP_I2CSlaveDataGet \ + ROM_I2CSlaveDataGet +#else +#define MAP_I2CSlaveDataGet \ + I2CSlaveDataGet +#endif +#ifdef ROM_I2CSlaveIntEnableEx +#define MAP_I2CSlaveIntEnableEx \ + ROM_I2CSlaveIntEnableEx +#else +#define MAP_I2CSlaveIntEnableEx \ + I2CSlaveIntEnableEx +#endif +#ifdef ROM_I2CSlaveIntDisableEx +#define MAP_I2CSlaveIntDisableEx \ + ROM_I2CSlaveIntDisableEx +#else +#define MAP_I2CSlaveIntDisableEx \ + I2CSlaveIntDisableEx +#endif +#ifdef ROM_I2CSlaveIntStatusEx +#define MAP_I2CSlaveIntStatusEx \ + ROM_I2CSlaveIntStatusEx +#else +#define MAP_I2CSlaveIntStatusEx \ + I2CSlaveIntStatusEx +#endif +#ifdef ROM_I2CSlaveIntClearEx +#define MAP_I2CSlaveIntClearEx \ + ROM_I2CSlaveIntClearEx +#else +#define MAP_I2CSlaveIntClearEx \ + I2CSlaveIntClearEx +#endif + +//***************************************************************************** +// +// Macros for the I2S API. +// +//***************************************************************************** +#ifdef ROM_I2SIntStatus +#define MAP_I2SIntStatus \ + ROM_I2SIntStatus +#else +#define MAP_I2SIntStatus \ + I2SIntStatus +#endif +#ifdef ROM_I2STxEnable +#define MAP_I2STxEnable \ + ROM_I2STxEnable +#else +#define MAP_I2STxEnable \ + I2STxEnable +#endif +#ifdef ROM_I2STxDisable +#define MAP_I2STxDisable \ + ROM_I2STxDisable +#else +#define MAP_I2STxDisable \ + I2STxDisable +#endif +#ifdef ROM_I2STxDataPut +#define MAP_I2STxDataPut \ + ROM_I2STxDataPut +#else +#define MAP_I2STxDataPut \ + I2STxDataPut +#endif +#ifdef ROM_I2STxDataPutNonBlocking +#define MAP_I2STxDataPutNonBlocking \ + ROM_I2STxDataPutNonBlocking +#else +#define MAP_I2STxDataPutNonBlocking \ + I2STxDataPutNonBlocking +#endif +#ifdef ROM_I2STxConfigSet +#define MAP_I2STxConfigSet \ + ROM_I2STxConfigSet +#else +#define MAP_I2STxConfigSet \ + I2STxConfigSet +#endif +#ifdef ROM_I2STxFIFOLimitSet +#define MAP_I2STxFIFOLimitSet \ + ROM_I2STxFIFOLimitSet +#else +#define MAP_I2STxFIFOLimitSet \ + I2STxFIFOLimitSet +#endif +#ifdef ROM_I2STxFIFOLimitGet +#define MAP_I2STxFIFOLimitGet \ + ROM_I2STxFIFOLimitGet +#else +#define MAP_I2STxFIFOLimitGet \ + I2STxFIFOLimitGet +#endif +#ifdef ROM_I2STxFIFOLevelGet +#define MAP_I2STxFIFOLevelGet \ + ROM_I2STxFIFOLevelGet +#else +#define MAP_I2STxFIFOLevelGet \ + I2STxFIFOLevelGet +#endif +#ifdef ROM_I2SRxEnable +#define MAP_I2SRxEnable \ + ROM_I2SRxEnable +#else +#define MAP_I2SRxEnable \ + I2SRxEnable +#endif +#ifdef ROM_I2SRxDisable +#define MAP_I2SRxDisable \ + ROM_I2SRxDisable +#else +#define MAP_I2SRxDisable \ + I2SRxDisable +#endif +#ifdef ROM_I2SRxDataGet +#define MAP_I2SRxDataGet \ + ROM_I2SRxDataGet +#else +#define MAP_I2SRxDataGet \ + I2SRxDataGet +#endif +#ifdef ROM_I2SRxDataGetNonBlocking +#define MAP_I2SRxDataGetNonBlocking \ + ROM_I2SRxDataGetNonBlocking +#else +#define MAP_I2SRxDataGetNonBlocking \ + I2SRxDataGetNonBlocking +#endif +#ifdef ROM_I2SRxConfigSet +#define MAP_I2SRxConfigSet \ + ROM_I2SRxConfigSet +#else +#define MAP_I2SRxConfigSet \ + I2SRxConfigSet +#endif +#ifdef ROM_I2SRxFIFOLimitSet +#define MAP_I2SRxFIFOLimitSet \ + ROM_I2SRxFIFOLimitSet +#else +#define MAP_I2SRxFIFOLimitSet \ + I2SRxFIFOLimitSet +#endif +#ifdef ROM_I2SRxFIFOLimitGet +#define MAP_I2SRxFIFOLimitGet \ + ROM_I2SRxFIFOLimitGet +#else +#define MAP_I2SRxFIFOLimitGet \ + I2SRxFIFOLimitGet +#endif +#ifdef ROM_I2SRxFIFOLevelGet +#define MAP_I2SRxFIFOLevelGet \ + ROM_I2SRxFIFOLevelGet +#else +#define MAP_I2SRxFIFOLevelGet \ + I2SRxFIFOLevelGet +#endif +#ifdef ROM_I2STxRxEnable +#define MAP_I2STxRxEnable \ + ROM_I2STxRxEnable +#else +#define MAP_I2STxRxEnable \ + I2STxRxEnable +#endif +#ifdef ROM_I2STxRxDisable +#define MAP_I2STxRxDisable \ + ROM_I2STxRxDisable +#else +#define MAP_I2STxRxDisable \ + I2STxRxDisable +#endif +#ifdef ROM_I2STxRxConfigSet +#define MAP_I2STxRxConfigSet \ + ROM_I2STxRxConfigSet +#else +#define MAP_I2STxRxConfigSet \ + I2STxRxConfigSet +#endif +#ifdef ROM_I2SMasterClockSelect +#define MAP_I2SMasterClockSelect \ + ROM_I2SMasterClockSelect +#else +#define MAP_I2SMasterClockSelect \ + I2SMasterClockSelect +#endif +#ifdef ROM_I2SIntEnable +#define MAP_I2SIntEnable \ + ROM_I2SIntEnable +#else +#define MAP_I2SIntEnable \ + I2SIntEnable +#endif +#ifdef ROM_I2SIntDisable +#define MAP_I2SIntDisable \ + ROM_I2SIntDisable +#else +#define MAP_I2SIntDisable \ + I2SIntDisable +#endif +#ifdef ROM_I2SIntClear +#define MAP_I2SIntClear \ + ROM_I2SIntClear +#else +#define MAP_I2SIntClear \ + I2SIntClear +#endif + +//***************************************************************************** +// +// Macros for the Interrupt API. +// +//***************************************************************************** +#ifdef ROM_IntEnable +#define MAP_IntEnable \ + ROM_IntEnable +#else +#define MAP_IntEnable \ + IntEnable +#endif +#ifdef ROM_IntMasterEnable +#define MAP_IntMasterEnable \ + ROM_IntMasterEnable +#else +#define MAP_IntMasterEnable \ + IntMasterEnable +#endif +#ifdef ROM_IntMasterDisable +#define MAP_IntMasterDisable \ + ROM_IntMasterDisable +#else +#define MAP_IntMasterDisable \ + IntMasterDisable +#endif +#ifdef ROM_IntDisable +#define MAP_IntDisable \ + ROM_IntDisable +#else +#define MAP_IntDisable \ + IntDisable +#endif +#ifdef ROM_IntPriorityGroupingSet +#define MAP_IntPriorityGroupingSet \ + ROM_IntPriorityGroupingSet +#else +#define MAP_IntPriorityGroupingSet \ + IntPriorityGroupingSet +#endif +#ifdef ROM_IntPriorityGroupingGet +#define MAP_IntPriorityGroupingGet \ + ROM_IntPriorityGroupingGet +#else +#define MAP_IntPriorityGroupingGet \ + IntPriorityGroupingGet +#endif +#ifdef ROM_IntPrioritySet +#define MAP_IntPrioritySet \ + ROM_IntPrioritySet +#else +#define MAP_IntPrioritySet \ + IntPrioritySet +#endif +#ifdef ROM_IntPriorityGet +#define MAP_IntPriorityGet \ + ROM_IntPriorityGet +#else +#define MAP_IntPriorityGet \ + IntPriorityGet +#endif +#ifdef ROM_IntPendSet +#define MAP_IntPendSet \ + ROM_IntPendSet +#else +#define MAP_IntPendSet \ + IntPendSet +#endif +#ifdef ROM_IntPendClear +#define MAP_IntPendClear \ + ROM_IntPendClear +#else +#define MAP_IntPendClear \ + IntPendClear +#endif + +//***************************************************************************** +// +// Macros for the MPU API. +// +//***************************************************************************** +#ifdef ROM_MPUEnable +#define MAP_MPUEnable \ + ROM_MPUEnable +#else +#define MAP_MPUEnable \ + MPUEnable +#endif +#ifdef ROM_MPUDisable +#define MAP_MPUDisable \ + ROM_MPUDisable +#else +#define MAP_MPUDisable \ + MPUDisable +#endif +#ifdef ROM_MPURegionCountGet +#define MAP_MPURegionCountGet \ + ROM_MPURegionCountGet +#else +#define MAP_MPURegionCountGet \ + MPURegionCountGet +#endif +#ifdef ROM_MPURegionEnable +#define MAP_MPURegionEnable \ + ROM_MPURegionEnable +#else +#define MAP_MPURegionEnable \ + MPURegionEnable +#endif +#ifdef ROM_MPURegionDisable +#define MAP_MPURegionDisable \ + ROM_MPURegionDisable +#else +#define MAP_MPURegionDisable \ + MPURegionDisable +#endif +#ifdef ROM_MPURegionSet +#define MAP_MPURegionSet \ + ROM_MPURegionSet +#else +#define MAP_MPURegionSet \ + MPURegionSet +#endif +#ifdef ROM_MPURegionGet +#define MAP_MPURegionGet \ + ROM_MPURegionGet +#else +#define MAP_MPURegionGet \ + MPURegionGet +#endif + +//***************************************************************************** +// +// Macros for the PWM API. +// +//***************************************************************************** +#ifdef ROM_PWMPulseWidthSet +#define MAP_PWMPulseWidthSet \ + ROM_PWMPulseWidthSet +#else +#define MAP_PWMPulseWidthSet \ + PWMPulseWidthSet +#endif +#ifdef ROM_PWMGenConfigure +#define MAP_PWMGenConfigure \ + ROM_PWMGenConfigure +#else +#define MAP_PWMGenConfigure \ + PWMGenConfigure +#endif +#ifdef ROM_PWMGenPeriodSet +#define MAP_PWMGenPeriodSet \ + ROM_PWMGenPeriodSet +#else +#define MAP_PWMGenPeriodSet \ + PWMGenPeriodSet +#endif +#ifdef ROM_PWMGenPeriodGet +#define MAP_PWMGenPeriodGet \ + ROM_PWMGenPeriodGet +#else +#define MAP_PWMGenPeriodGet \ + PWMGenPeriodGet +#endif +#ifdef ROM_PWMGenEnable +#define MAP_PWMGenEnable \ + ROM_PWMGenEnable +#else +#define MAP_PWMGenEnable \ + PWMGenEnable +#endif +#ifdef ROM_PWMGenDisable +#define MAP_PWMGenDisable \ + ROM_PWMGenDisable +#else +#define MAP_PWMGenDisable \ + PWMGenDisable +#endif +#ifdef ROM_PWMPulseWidthGet +#define MAP_PWMPulseWidthGet \ + ROM_PWMPulseWidthGet +#else +#define MAP_PWMPulseWidthGet \ + PWMPulseWidthGet +#endif +#ifdef ROM_PWMDeadBandEnable +#define MAP_PWMDeadBandEnable \ + ROM_PWMDeadBandEnable +#else +#define MAP_PWMDeadBandEnable \ + PWMDeadBandEnable +#endif +#ifdef ROM_PWMDeadBandDisable +#define MAP_PWMDeadBandDisable \ + ROM_PWMDeadBandDisable +#else +#define MAP_PWMDeadBandDisable \ + PWMDeadBandDisable +#endif +#ifdef ROM_PWMSyncUpdate +#define MAP_PWMSyncUpdate \ + ROM_PWMSyncUpdate +#else +#define MAP_PWMSyncUpdate \ + PWMSyncUpdate +#endif +#ifdef ROM_PWMSyncTimeBase +#define MAP_PWMSyncTimeBase \ + ROM_PWMSyncTimeBase +#else +#define MAP_PWMSyncTimeBase \ + PWMSyncTimeBase +#endif +#ifdef ROM_PWMOutputState +#define MAP_PWMOutputState \ + ROM_PWMOutputState +#else +#define MAP_PWMOutputState \ + PWMOutputState +#endif +#ifdef ROM_PWMOutputInvert +#define MAP_PWMOutputInvert \ + ROM_PWMOutputInvert +#else +#define MAP_PWMOutputInvert \ + PWMOutputInvert +#endif +#ifdef ROM_PWMOutputFault +#define MAP_PWMOutputFault \ + ROM_PWMOutputFault +#else +#define MAP_PWMOutputFault \ + PWMOutputFault +#endif +#ifdef ROM_PWMGenIntTrigEnable +#define MAP_PWMGenIntTrigEnable \ + ROM_PWMGenIntTrigEnable +#else +#define MAP_PWMGenIntTrigEnable \ + PWMGenIntTrigEnable +#endif +#ifdef ROM_PWMGenIntTrigDisable +#define MAP_PWMGenIntTrigDisable \ + ROM_PWMGenIntTrigDisable +#else +#define MAP_PWMGenIntTrigDisable \ + PWMGenIntTrigDisable +#endif +#ifdef ROM_PWMGenIntStatus +#define MAP_PWMGenIntStatus \ + ROM_PWMGenIntStatus +#else +#define MAP_PWMGenIntStatus \ + PWMGenIntStatus +#endif +#ifdef ROM_PWMGenIntClear +#define MAP_PWMGenIntClear \ + ROM_PWMGenIntClear +#else +#define MAP_PWMGenIntClear \ + PWMGenIntClear +#endif +#ifdef ROM_PWMIntEnable +#define MAP_PWMIntEnable \ + ROM_PWMIntEnable +#else +#define MAP_PWMIntEnable \ + PWMIntEnable +#endif +#ifdef ROM_PWMIntDisable +#define MAP_PWMIntDisable \ + ROM_PWMIntDisable +#else +#define MAP_PWMIntDisable \ + PWMIntDisable +#endif +#ifdef ROM_PWMFaultIntClear +#define MAP_PWMFaultIntClear \ + ROM_PWMFaultIntClear +#else +#define MAP_PWMFaultIntClear \ + PWMFaultIntClear +#endif +#ifdef ROM_PWMIntStatus +#define MAP_PWMIntStatus \ + ROM_PWMIntStatus +#else +#define MAP_PWMIntStatus \ + PWMIntStatus +#endif +#ifdef ROM_PWMOutputFaultLevel +#define MAP_PWMOutputFaultLevel \ + ROM_PWMOutputFaultLevel +#else +#define MAP_PWMOutputFaultLevel \ + PWMOutputFaultLevel +#endif +#ifdef ROM_PWMFaultIntClearExt +#define MAP_PWMFaultIntClearExt \ + ROM_PWMFaultIntClearExt +#else +#define MAP_PWMFaultIntClearExt \ + PWMFaultIntClearExt +#endif +#ifdef ROM_PWMGenFaultConfigure +#define MAP_PWMGenFaultConfigure \ + ROM_PWMGenFaultConfigure +#else +#define MAP_PWMGenFaultConfigure \ + PWMGenFaultConfigure +#endif +#ifdef ROM_PWMGenFaultTriggerSet +#define MAP_PWMGenFaultTriggerSet \ + ROM_PWMGenFaultTriggerSet +#else +#define MAP_PWMGenFaultTriggerSet \ + PWMGenFaultTriggerSet +#endif +#ifdef ROM_PWMGenFaultTriggerGet +#define MAP_PWMGenFaultTriggerGet \ + ROM_PWMGenFaultTriggerGet +#else +#define MAP_PWMGenFaultTriggerGet \ + PWMGenFaultTriggerGet +#endif +#ifdef ROM_PWMGenFaultStatus +#define MAP_PWMGenFaultStatus \ + ROM_PWMGenFaultStatus +#else +#define MAP_PWMGenFaultStatus \ + PWMGenFaultStatus +#endif +#ifdef ROM_PWMGenFaultClear +#define MAP_PWMGenFaultClear \ + ROM_PWMGenFaultClear +#else +#define MAP_PWMGenFaultClear \ + PWMGenFaultClear +#endif + +//***************************************************************************** +// +// Macros for the QEI API. +// +//***************************************************************************** +#ifdef ROM_QEIPositionGet +#define MAP_QEIPositionGet \ + ROM_QEIPositionGet +#else +#define MAP_QEIPositionGet \ + QEIPositionGet +#endif +#ifdef ROM_QEIEnable +#define MAP_QEIEnable \ + ROM_QEIEnable +#else +#define MAP_QEIEnable \ + QEIEnable +#endif +#ifdef ROM_QEIDisable +#define MAP_QEIDisable \ + ROM_QEIDisable +#else +#define MAP_QEIDisable \ + QEIDisable +#endif +#ifdef ROM_QEIConfigure +#define MAP_QEIConfigure \ + ROM_QEIConfigure +#else +#define MAP_QEIConfigure \ + QEIConfigure +#endif +#ifdef ROM_QEIPositionSet +#define MAP_QEIPositionSet \ + ROM_QEIPositionSet +#else +#define MAP_QEIPositionSet \ + QEIPositionSet +#endif +#ifdef ROM_QEIDirectionGet +#define MAP_QEIDirectionGet \ + ROM_QEIDirectionGet +#else +#define MAP_QEIDirectionGet \ + QEIDirectionGet +#endif +#ifdef ROM_QEIErrorGet +#define MAP_QEIErrorGet \ + ROM_QEIErrorGet +#else +#define MAP_QEIErrorGet \ + QEIErrorGet +#endif +#ifdef ROM_QEIVelocityEnable +#define MAP_QEIVelocityEnable \ + ROM_QEIVelocityEnable +#else +#define MAP_QEIVelocityEnable \ + QEIVelocityEnable +#endif +#ifdef ROM_QEIVelocityDisable +#define MAP_QEIVelocityDisable \ + ROM_QEIVelocityDisable +#else +#define MAP_QEIVelocityDisable \ + QEIVelocityDisable +#endif +#ifdef ROM_QEIVelocityConfigure +#define MAP_QEIVelocityConfigure \ + ROM_QEIVelocityConfigure +#else +#define MAP_QEIVelocityConfigure \ + QEIVelocityConfigure +#endif +#ifdef ROM_QEIVelocityGet +#define MAP_QEIVelocityGet \ + ROM_QEIVelocityGet +#else +#define MAP_QEIVelocityGet \ + QEIVelocityGet +#endif +#ifdef ROM_QEIIntEnable +#define MAP_QEIIntEnable \ + ROM_QEIIntEnable +#else +#define MAP_QEIIntEnable \ + QEIIntEnable +#endif +#ifdef ROM_QEIIntDisable +#define MAP_QEIIntDisable \ + ROM_QEIIntDisable +#else +#define MAP_QEIIntDisable \ + QEIIntDisable +#endif +#ifdef ROM_QEIIntStatus +#define MAP_QEIIntStatus \ + ROM_QEIIntStatus +#else +#define MAP_QEIIntStatus \ + QEIIntStatus +#endif +#ifdef ROM_QEIIntClear +#define MAP_QEIIntClear \ + ROM_QEIIntClear +#else +#define MAP_QEIIntClear \ + QEIIntClear +#endif + +//***************************************************************************** +// +// Macros for the SSI API. +// +//***************************************************************************** +#ifdef ROM_SSIDataPut +#define MAP_SSIDataPut \ + ROM_SSIDataPut +#else +#define MAP_SSIDataPut \ + SSIDataPut +#endif +#ifdef ROM_SSIConfigSetExpClk +#define MAP_SSIConfigSetExpClk \ + ROM_SSIConfigSetExpClk +#else +#define MAP_SSIConfigSetExpClk \ + SSIConfigSetExpClk +#endif +#ifdef ROM_SSIEnable +#define MAP_SSIEnable \ + ROM_SSIEnable +#else +#define MAP_SSIEnable \ + SSIEnable +#endif +#ifdef ROM_SSIDisable +#define MAP_SSIDisable \ + ROM_SSIDisable +#else +#define MAP_SSIDisable \ + SSIDisable +#endif +#ifdef ROM_SSIIntEnable +#define MAP_SSIIntEnable \ + ROM_SSIIntEnable +#else +#define MAP_SSIIntEnable \ + SSIIntEnable +#endif +#ifdef ROM_SSIIntDisable +#define MAP_SSIIntDisable \ + ROM_SSIIntDisable +#else +#define MAP_SSIIntDisable \ + SSIIntDisable +#endif +#ifdef ROM_SSIIntStatus +#define MAP_SSIIntStatus \ + ROM_SSIIntStatus +#else +#define MAP_SSIIntStatus \ + SSIIntStatus +#endif +#ifdef ROM_SSIIntClear +#define MAP_SSIIntClear \ + ROM_SSIIntClear +#else +#define MAP_SSIIntClear \ + SSIIntClear +#endif +#ifdef ROM_SSIDataPutNonBlocking +#define MAP_SSIDataPutNonBlocking \ + ROM_SSIDataPutNonBlocking +#else +#define MAP_SSIDataPutNonBlocking \ + SSIDataPutNonBlocking +#endif +#ifdef ROM_SSIDataGet +#define MAP_SSIDataGet \ + ROM_SSIDataGet +#else +#define MAP_SSIDataGet \ + SSIDataGet +#endif +#ifdef ROM_SSIDataGetNonBlocking +#define MAP_SSIDataGetNonBlocking \ + ROM_SSIDataGetNonBlocking +#else +#define MAP_SSIDataGetNonBlocking \ + SSIDataGetNonBlocking +#endif +#ifdef ROM_SSIDMAEnable +#define MAP_SSIDMAEnable \ + ROM_SSIDMAEnable +#else +#define MAP_SSIDMAEnable \ + SSIDMAEnable +#endif +#ifdef ROM_SSIDMADisable +#define MAP_SSIDMADisable \ + ROM_SSIDMADisable +#else +#define MAP_SSIDMADisable \ + SSIDMADisable +#endif +#ifdef ROM_SSIBusy +#define MAP_SSIBusy \ + ROM_SSIBusy +#else +#define MAP_SSIBusy \ + SSIBusy +#endif + +//***************************************************************************** +// +// Macros for the SysCtl API. +// +//***************************************************************************** +#ifdef ROM_SysCtlSleep +#define MAP_SysCtlSleep \ + ROM_SysCtlSleep +#else +#define MAP_SysCtlSleep \ + SysCtlSleep +#endif +#ifdef ROM_SysCtlSRAMSizeGet +#define MAP_SysCtlSRAMSizeGet \ + ROM_SysCtlSRAMSizeGet +#else +#define MAP_SysCtlSRAMSizeGet \ + SysCtlSRAMSizeGet +#endif +#ifdef ROM_SysCtlFlashSizeGet +#define MAP_SysCtlFlashSizeGet \ + ROM_SysCtlFlashSizeGet +#else +#define MAP_SysCtlFlashSizeGet \ + SysCtlFlashSizeGet +#endif +#ifdef ROM_SysCtlPinPresent +#define MAP_SysCtlPinPresent \ + ROM_SysCtlPinPresent +#else +#define MAP_SysCtlPinPresent \ + SysCtlPinPresent +#endif +#ifdef ROM_SysCtlPeripheralPresent +#define MAP_SysCtlPeripheralPresent \ + ROM_SysCtlPeripheralPresent +#else +#define MAP_SysCtlPeripheralPresent \ + SysCtlPeripheralPresent +#endif +#ifdef ROM_SysCtlPeripheralReset +#define MAP_SysCtlPeripheralReset \ + ROM_SysCtlPeripheralReset +#else +#define MAP_SysCtlPeripheralReset \ + SysCtlPeripheralReset +#endif +#ifdef ROM_SysCtlPeripheralEnable +#define MAP_SysCtlPeripheralEnable \ + ROM_SysCtlPeripheralEnable +#else +#define MAP_SysCtlPeripheralEnable \ + SysCtlPeripheralEnable +#endif +#ifdef ROM_SysCtlPeripheralDisable +#define MAP_SysCtlPeripheralDisable \ + ROM_SysCtlPeripheralDisable +#else +#define MAP_SysCtlPeripheralDisable \ + SysCtlPeripheralDisable +#endif +#ifdef ROM_SysCtlPeripheralSleepEnable +#define MAP_SysCtlPeripheralSleepEnable \ + ROM_SysCtlPeripheralSleepEnable +#else +#define MAP_SysCtlPeripheralSleepEnable \ + SysCtlPeripheralSleepEnable +#endif +#ifdef ROM_SysCtlPeripheralSleepDisable +#define MAP_SysCtlPeripheralSleepDisable \ + ROM_SysCtlPeripheralSleepDisable +#else +#define MAP_SysCtlPeripheralSleepDisable \ + SysCtlPeripheralSleepDisable +#endif +#ifdef ROM_SysCtlPeripheralDeepSleepEnable +#define MAP_SysCtlPeripheralDeepSleepEnable \ + ROM_SysCtlPeripheralDeepSleepEnable +#else +#define MAP_SysCtlPeripheralDeepSleepEnable \ + SysCtlPeripheralDeepSleepEnable +#endif +#ifdef ROM_SysCtlPeripheralDeepSleepDisable +#define MAP_SysCtlPeripheralDeepSleepDisable \ + ROM_SysCtlPeripheralDeepSleepDisable +#else +#define MAP_SysCtlPeripheralDeepSleepDisable \ + SysCtlPeripheralDeepSleepDisable +#endif +#ifdef ROM_SysCtlPeripheralClockGating +#define MAP_SysCtlPeripheralClockGating \ + ROM_SysCtlPeripheralClockGating +#else +#define MAP_SysCtlPeripheralClockGating \ + SysCtlPeripheralClockGating +#endif +#ifdef ROM_SysCtlIntEnable +#define MAP_SysCtlIntEnable \ + ROM_SysCtlIntEnable +#else +#define MAP_SysCtlIntEnable \ + SysCtlIntEnable +#endif +#ifdef ROM_SysCtlIntDisable +#define MAP_SysCtlIntDisable \ + ROM_SysCtlIntDisable +#else +#define MAP_SysCtlIntDisable \ + SysCtlIntDisable +#endif +#ifdef ROM_SysCtlIntClear +#define MAP_SysCtlIntClear \ + ROM_SysCtlIntClear +#else +#define MAP_SysCtlIntClear \ + SysCtlIntClear +#endif +#ifdef ROM_SysCtlIntStatus +#define MAP_SysCtlIntStatus \ + ROM_SysCtlIntStatus +#else +#define MAP_SysCtlIntStatus \ + SysCtlIntStatus +#endif +#ifdef ROM_SysCtlLDOSet +#define MAP_SysCtlLDOSet \ + ROM_SysCtlLDOSet +#else +#define MAP_SysCtlLDOSet \ + SysCtlLDOSet +#endif +#ifdef ROM_SysCtlLDOGet +#define MAP_SysCtlLDOGet \ + ROM_SysCtlLDOGet +#else +#define MAP_SysCtlLDOGet \ + SysCtlLDOGet +#endif +#ifdef ROM_SysCtlReset +#define MAP_SysCtlReset \ + ROM_SysCtlReset +#else +#define MAP_SysCtlReset \ + SysCtlReset +#endif +#ifdef ROM_SysCtlDeepSleep +#define MAP_SysCtlDeepSleep \ + ROM_SysCtlDeepSleep +#else +#define MAP_SysCtlDeepSleep \ + SysCtlDeepSleep +#endif +#ifdef ROM_SysCtlResetCauseGet +#define MAP_SysCtlResetCauseGet \ + ROM_SysCtlResetCauseGet +#else +#define MAP_SysCtlResetCauseGet \ + SysCtlResetCauseGet +#endif +#ifdef ROM_SysCtlResetCauseClear +#define MAP_SysCtlResetCauseClear \ + ROM_SysCtlResetCauseClear +#else +#define MAP_SysCtlResetCauseClear \ + SysCtlResetCauseClear +#endif +#ifdef ROM_SysCtlClockSet +#define MAP_SysCtlClockSet \ + ROM_SysCtlClockSet +#else +#define MAP_SysCtlClockSet \ + SysCtlClockSet +#endif +#ifdef ROM_SysCtlClockGet +#define MAP_SysCtlClockGet \ + ROM_SysCtlClockGet +#else +#define MAP_SysCtlClockGet \ + SysCtlClockGet +#endif +#ifdef ROM_SysCtlPWMClockSet +#define MAP_SysCtlPWMClockSet \ + ROM_SysCtlPWMClockSet +#else +#define MAP_SysCtlPWMClockSet \ + SysCtlPWMClockSet +#endif +#ifdef ROM_SysCtlPWMClockGet +#define MAP_SysCtlPWMClockGet \ + ROM_SysCtlPWMClockGet +#else +#define MAP_SysCtlPWMClockGet \ + SysCtlPWMClockGet +#endif +#ifdef ROM_SysCtlADCSpeedSet +#define MAP_SysCtlADCSpeedSet \ + ROM_SysCtlADCSpeedSet +#else +#define MAP_SysCtlADCSpeedSet \ + SysCtlADCSpeedSet +#endif +#ifdef ROM_SysCtlADCSpeedGet +#define MAP_SysCtlADCSpeedGet \ + ROM_SysCtlADCSpeedGet +#else +#define MAP_SysCtlADCSpeedGet \ + SysCtlADCSpeedGet +#endif +#ifdef ROM_SysCtlGPIOAHBEnable +#define MAP_SysCtlGPIOAHBEnable \ + ROM_SysCtlGPIOAHBEnable +#else +#define MAP_SysCtlGPIOAHBEnable \ + SysCtlGPIOAHBEnable +#endif +#ifdef ROM_SysCtlGPIOAHBDisable +#define MAP_SysCtlGPIOAHBDisable \ + ROM_SysCtlGPIOAHBDisable +#else +#define MAP_SysCtlGPIOAHBDisable \ + SysCtlGPIOAHBDisable +#endif +#ifdef ROM_SysCtlUSBPLLEnable +#define MAP_SysCtlUSBPLLEnable \ + ROM_SysCtlUSBPLLEnable +#else +#define MAP_SysCtlUSBPLLEnable \ + SysCtlUSBPLLEnable +#endif +#ifdef ROM_SysCtlUSBPLLDisable +#define MAP_SysCtlUSBPLLDisable \ + ROM_SysCtlUSBPLLDisable +#else +#define MAP_SysCtlUSBPLLDisable \ + SysCtlUSBPLLDisable +#endif +#ifdef ROM_SysCtlI2SMClkSet +#define MAP_SysCtlI2SMClkSet \ + ROM_SysCtlI2SMClkSet +#else +#define MAP_SysCtlI2SMClkSet \ + SysCtlI2SMClkSet +#endif +#ifdef ROM_SysCtlDelay +#define MAP_SysCtlDelay \ + ROM_SysCtlDelay +#else +#define MAP_SysCtlDelay \ + SysCtlDelay +#endif + +//***************************************************************************** +// +// Macros for the SysTick API. +// +//***************************************************************************** +#ifdef ROM_SysTickValueGet +#define MAP_SysTickValueGet \ + ROM_SysTickValueGet +#else +#define MAP_SysTickValueGet \ + SysTickValueGet +#endif +#ifdef ROM_SysTickEnable +#define MAP_SysTickEnable \ + ROM_SysTickEnable +#else +#define MAP_SysTickEnable \ + SysTickEnable +#endif +#ifdef ROM_SysTickDisable +#define MAP_SysTickDisable \ + ROM_SysTickDisable +#else +#define MAP_SysTickDisable \ + SysTickDisable +#endif +#ifdef ROM_SysTickIntEnable +#define MAP_SysTickIntEnable \ + ROM_SysTickIntEnable +#else +#define MAP_SysTickIntEnable \ + SysTickIntEnable +#endif +#ifdef ROM_SysTickIntDisable +#define MAP_SysTickIntDisable \ + ROM_SysTickIntDisable +#else +#define MAP_SysTickIntDisable \ + SysTickIntDisable +#endif +#ifdef ROM_SysTickPeriodSet +#define MAP_SysTickPeriodSet \ + ROM_SysTickPeriodSet +#else +#define MAP_SysTickPeriodSet \ + SysTickPeriodSet +#endif +#ifdef ROM_SysTickPeriodGet +#define MAP_SysTickPeriodGet \ + ROM_SysTickPeriodGet +#else +#define MAP_SysTickPeriodGet \ + SysTickPeriodGet +#endif + +//***************************************************************************** +// +// Macros for the Timer API. +// +//***************************************************************************** +#ifdef ROM_TimerIntClear +#define MAP_TimerIntClear \ + ROM_TimerIntClear +#else +#define MAP_TimerIntClear \ + TimerIntClear +#endif +#ifdef ROM_TimerEnable +#define MAP_TimerEnable \ + ROM_TimerEnable +#else +#define MAP_TimerEnable \ + TimerEnable +#endif +#ifdef ROM_TimerDisable +#define MAP_TimerDisable \ + ROM_TimerDisable +#else +#define MAP_TimerDisable \ + TimerDisable +#endif +#ifdef ROM_TimerConfigure +#define MAP_TimerConfigure \ + ROM_TimerConfigure +#else +#define MAP_TimerConfigure \ + TimerConfigure +#endif +#ifdef ROM_TimerControlLevel +#define MAP_TimerControlLevel \ + ROM_TimerControlLevel +#else +#define MAP_TimerControlLevel \ + TimerControlLevel +#endif +#ifdef ROM_TimerControlTrigger +#define MAP_TimerControlTrigger \ + ROM_TimerControlTrigger +#else +#define MAP_TimerControlTrigger \ + TimerControlTrigger +#endif +#ifdef ROM_TimerControlEvent +#define MAP_TimerControlEvent \ + ROM_TimerControlEvent +#else +#define MAP_TimerControlEvent \ + TimerControlEvent +#endif +#ifdef ROM_TimerControlStall +#define MAP_TimerControlStall \ + ROM_TimerControlStall +#else +#define MAP_TimerControlStall \ + TimerControlStall +#endif +#ifdef ROM_TimerRTCEnable +#define MAP_TimerRTCEnable \ + ROM_TimerRTCEnable +#else +#define MAP_TimerRTCEnable \ + TimerRTCEnable +#endif +#ifdef ROM_TimerRTCDisable +#define MAP_TimerRTCDisable \ + ROM_TimerRTCDisable +#else +#define MAP_TimerRTCDisable \ + TimerRTCDisable +#endif +#ifdef ROM_TimerPrescaleSet +#define MAP_TimerPrescaleSet \ + ROM_TimerPrescaleSet +#else +#define MAP_TimerPrescaleSet \ + TimerPrescaleSet +#endif +#ifdef ROM_TimerPrescaleGet +#define MAP_TimerPrescaleGet \ + ROM_TimerPrescaleGet +#else +#define MAP_TimerPrescaleGet \ + TimerPrescaleGet +#endif +#ifdef ROM_TimerLoadSet +#define MAP_TimerLoadSet \ + ROM_TimerLoadSet +#else +#define MAP_TimerLoadSet \ + TimerLoadSet +#endif +#ifdef ROM_TimerLoadGet +#define MAP_TimerLoadGet \ + ROM_TimerLoadGet +#else +#define MAP_TimerLoadGet \ + TimerLoadGet +#endif +#ifdef ROM_TimerValueGet +#define MAP_TimerValueGet \ + ROM_TimerValueGet +#else +#define MAP_TimerValueGet \ + TimerValueGet +#endif +#ifdef ROM_TimerMatchSet +#define MAP_TimerMatchSet \ + ROM_TimerMatchSet +#else +#define MAP_TimerMatchSet \ + TimerMatchSet +#endif +#ifdef ROM_TimerMatchGet +#define MAP_TimerMatchGet \ + ROM_TimerMatchGet +#else +#define MAP_TimerMatchGet \ + TimerMatchGet +#endif +#ifdef ROM_TimerIntEnable +#define MAP_TimerIntEnable \ + ROM_TimerIntEnable +#else +#define MAP_TimerIntEnable \ + TimerIntEnable +#endif +#ifdef ROM_TimerIntDisable +#define MAP_TimerIntDisable \ + ROM_TimerIntDisable +#else +#define MAP_TimerIntDisable \ + TimerIntDisable +#endif +#ifdef ROM_TimerIntStatus +#define MAP_TimerIntStatus \ + ROM_TimerIntStatus +#else +#define MAP_TimerIntStatus \ + TimerIntStatus +#endif + +//***************************************************************************** +// +// Macros for the UART API. +// +//***************************************************************************** +#ifdef ROM_UARTCharPut +#define MAP_UARTCharPut \ + ROM_UARTCharPut +#else +#define MAP_UARTCharPut \ + UARTCharPut +#endif +#ifdef ROM_UARTParityModeSet +#define MAP_UARTParityModeSet \ + ROM_UARTParityModeSet +#else +#define MAP_UARTParityModeSet \ + UARTParityModeSet +#endif +#ifdef ROM_UARTParityModeGet +#define MAP_UARTParityModeGet \ + ROM_UARTParityModeGet +#else +#define MAP_UARTParityModeGet \ + UARTParityModeGet +#endif +#ifdef ROM_UARTFIFOLevelSet +#define MAP_UARTFIFOLevelSet \ + ROM_UARTFIFOLevelSet +#else +#define MAP_UARTFIFOLevelSet \ + UARTFIFOLevelSet +#endif +#ifdef ROM_UARTFIFOLevelGet +#define MAP_UARTFIFOLevelGet \ + ROM_UARTFIFOLevelGet +#else +#define MAP_UARTFIFOLevelGet \ + UARTFIFOLevelGet +#endif +#ifdef ROM_UARTConfigSetExpClk +#define MAP_UARTConfigSetExpClk \ + ROM_UARTConfigSetExpClk +#else +#define MAP_UARTConfigSetExpClk \ + UARTConfigSetExpClk +#endif +#ifdef ROM_UARTConfigGetExpClk +#define MAP_UARTConfigGetExpClk \ + ROM_UARTConfigGetExpClk +#else +#define MAP_UARTConfigGetExpClk \ + UARTConfigGetExpClk +#endif +#ifdef ROM_UARTEnable +#define MAP_UARTEnable \ + ROM_UARTEnable +#else +#define MAP_UARTEnable \ + UARTEnable +#endif +#ifdef ROM_UARTDisable +#define MAP_UARTDisable \ + ROM_UARTDisable +#else +#define MAP_UARTDisable \ + UARTDisable +#endif +#ifdef ROM_UARTEnableSIR +#define MAP_UARTEnableSIR \ + ROM_UARTEnableSIR +#else +#define MAP_UARTEnableSIR \ + UARTEnableSIR +#endif +#ifdef ROM_UARTDisableSIR +#define MAP_UARTDisableSIR \ + ROM_UARTDisableSIR +#else +#define MAP_UARTDisableSIR \ + UARTDisableSIR +#endif +#ifdef ROM_UARTCharsAvail +#define MAP_UARTCharsAvail \ + ROM_UARTCharsAvail +#else +#define MAP_UARTCharsAvail \ + UARTCharsAvail +#endif +#ifdef ROM_UARTSpaceAvail +#define MAP_UARTSpaceAvail \ + ROM_UARTSpaceAvail +#else +#define MAP_UARTSpaceAvail \ + UARTSpaceAvail +#endif +#ifdef ROM_UARTCharGetNonBlocking +#define MAP_UARTCharGetNonBlocking \ + ROM_UARTCharGetNonBlocking +#else +#define MAP_UARTCharGetNonBlocking \ + UARTCharGetNonBlocking +#endif +#ifdef ROM_UARTCharGet +#define MAP_UARTCharGet \ + ROM_UARTCharGet +#else +#define MAP_UARTCharGet \ + UARTCharGet +#endif +#ifdef ROM_UARTCharPutNonBlocking +#define MAP_UARTCharPutNonBlocking \ + ROM_UARTCharPutNonBlocking +#else +#define MAP_UARTCharPutNonBlocking \ + UARTCharPutNonBlocking +#endif +#ifdef ROM_UARTBreakCtl +#define MAP_UARTBreakCtl \ + ROM_UARTBreakCtl +#else +#define MAP_UARTBreakCtl \ + UARTBreakCtl +#endif +#ifdef ROM_UARTIntEnable +#define MAP_UARTIntEnable \ + ROM_UARTIntEnable +#else +#define MAP_UARTIntEnable \ + UARTIntEnable +#endif +#ifdef ROM_UARTIntDisable +#define MAP_UARTIntDisable \ + ROM_UARTIntDisable +#else +#define MAP_UARTIntDisable \ + UARTIntDisable +#endif +#ifdef ROM_UARTIntStatus +#define MAP_UARTIntStatus \ + ROM_UARTIntStatus +#else +#define MAP_UARTIntStatus \ + UARTIntStatus +#endif +#ifdef ROM_UARTIntClear +#define MAP_UARTIntClear \ + ROM_UARTIntClear +#else +#define MAP_UARTIntClear \ + UARTIntClear +#endif +#ifdef ROM_UARTDMAEnable +#define MAP_UARTDMAEnable \ + ROM_UARTDMAEnable +#else +#define MAP_UARTDMAEnable \ + UARTDMAEnable +#endif +#ifdef ROM_UARTDMADisable +#define MAP_UARTDMADisable \ + ROM_UARTDMADisable +#else +#define MAP_UARTDMADisable \ + UARTDMADisable +#endif +#ifdef ROM_UARTFIFOEnable +#define MAP_UARTFIFOEnable \ + ROM_UARTFIFOEnable +#else +#define MAP_UARTFIFOEnable \ + UARTFIFOEnable +#endif +#ifdef ROM_UARTFIFODisable +#define MAP_UARTFIFODisable \ + ROM_UARTFIFODisable +#else +#define MAP_UARTFIFODisable \ + UARTFIFODisable +#endif +#ifdef ROM_UARTBusy +#define MAP_UARTBusy \ + ROM_UARTBusy +#else +#define MAP_UARTBusy \ + UARTBusy +#endif +#ifdef ROM_UARTTxIntModeSet +#define MAP_UARTTxIntModeSet \ + ROM_UARTTxIntModeSet +#else +#define MAP_UARTTxIntModeSet \ + UARTTxIntModeSet +#endif +#ifdef ROM_UARTTxIntModeGet +#define MAP_UARTTxIntModeGet \ + ROM_UARTTxIntModeGet +#else +#define MAP_UARTTxIntModeGet \ + UARTTxIntModeGet +#endif +#ifdef ROM_UARTRxErrorGet +#define MAP_UARTRxErrorGet \ + ROM_UARTRxErrorGet +#else +#define MAP_UARTRxErrorGet \ + UARTRxErrorGet +#endif +#ifdef ROM_UARTRxErrorClear +#define MAP_UARTRxErrorClear \ + ROM_UARTRxErrorClear +#else +#define MAP_UARTRxErrorClear \ + UARTRxErrorClear +#endif + +//***************************************************************************** +// +// Macros for the uDMA API. +// +//***************************************************************************** +#ifdef ROM_uDMAChannelTransferSet +#define MAP_uDMAChannelTransferSet \ + ROM_uDMAChannelTransferSet +#else +#define MAP_uDMAChannelTransferSet \ + uDMAChannelTransferSet +#endif +#ifdef ROM_uDMAEnable +#define MAP_uDMAEnable \ + ROM_uDMAEnable +#else +#define MAP_uDMAEnable \ + uDMAEnable +#endif +#ifdef ROM_uDMADisable +#define MAP_uDMADisable \ + ROM_uDMADisable +#else +#define MAP_uDMADisable \ + uDMADisable +#endif +#ifdef ROM_uDMAErrorStatusGet +#define MAP_uDMAErrorStatusGet \ + ROM_uDMAErrorStatusGet +#else +#define MAP_uDMAErrorStatusGet \ + uDMAErrorStatusGet +#endif +#ifdef ROM_uDMAErrorStatusClear +#define MAP_uDMAErrorStatusClear \ + ROM_uDMAErrorStatusClear +#else +#define MAP_uDMAErrorStatusClear \ + uDMAErrorStatusClear +#endif +#ifdef ROM_uDMAChannelEnable +#define MAP_uDMAChannelEnable \ + ROM_uDMAChannelEnable +#else +#define MAP_uDMAChannelEnable \ + uDMAChannelEnable +#endif +#ifdef ROM_uDMAChannelDisable +#define MAP_uDMAChannelDisable \ + ROM_uDMAChannelDisable +#else +#define MAP_uDMAChannelDisable \ + uDMAChannelDisable +#endif +#ifdef ROM_uDMAChannelIsEnabled +#define MAP_uDMAChannelIsEnabled \ + ROM_uDMAChannelIsEnabled +#else +#define MAP_uDMAChannelIsEnabled \ + uDMAChannelIsEnabled +#endif +#ifdef ROM_uDMAControlBaseSet +#define MAP_uDMAControlBaseSet \ + ROM_uDMAControlBaseSet +#else +#define MAP_uDMAControlBaseSet \ + uDMAControlBaseSet +#endif +#ifdef ROM_uDMAControlBaseGet +#define MAP_uDMAControlBaseGet \ + ROM_uDMAControlBaseGet +#else +#define MAP_uDMAControlBaseGet \ + uDMAControlBaseGet +#endif +#ifdef ROM_uDMAChannelRequest +#define MAP_uDMAChannelRequest \ + ROM_uDMAChannelRequest +#else +#define MAP_uDMAChannelRequest \ + uDMAChannelRequest +#endif +#ifdef ROM_uDMAChannelAttributeEnable +#define MAP_uDMAChannelAttributeEnable \ + ROM_uDMAChannelAttributeEnable +#else +#define MAP_uDMAChannelAttributeEnable \ + uDMAChannelAttributeEnable +#endif +#ifdef ROM_uDMAChannelAttributeDisable +#define MAP_uDMAChannelAttributeDisable \ + ROM_uDMAChannelAttributeDisable +#else +#define MAP_uDMAChannelAttributeDisable \ + uDMAChannelAttributeDisable +#endif +#ifdef ROM_uDMAChannelAttributeGet +#define MAP_uDMAChannelAttributeGet \ + ROM_uDMAChannelAttributeGet +#else +#define MAP_uDMAChannelAttributeGet \ + uDMAChannelAttributeGet +#endif +#ifdef ROM_uDMAChannelControlSet +#define MAP_uDMAChannelControlSet \ + ROM_uDMAChannelControlSet +#else +#define MAP_uDMAChannelControlSet \ + uDMAChannelControlSet +#endif +#ifdef ROM_uDMAChannelSizeGet +#define MAP_uDMAChannelSizeGet \ + ROM_uDMAChannelSizeGet +#else +#define MAP_uDMAChannelSizeGet \ + uDMAChannelSizeGet +#endif +#ifdef ROM_uDMAChannelModeGet +#define MAP_uDMAChannelModeGet \ + ROM_uDMAChannelModeGet +#else +#define MAP_uDMAChannelModeGet \ + uDMAChannelModeGet +#endif +#ifdef ROM_uDMAChannelSelectSecondary +#define MAP_uDMAChannelSelectSecondary \ + ROM_uDMAChannelSelectSecondary +#else +#define MAP_uDMAChannelSelectSecondary \ + uDMAChannelSelectSecondary +#endif +#ifdef ROM_uDMAChannelSelectDefault +#define MAP_uDMAChannelSelectDefault \ + ROM_uDMAChannelSelectDefault +#else +#define MAP_uDMAChannelSelectDefault \ + uDMAChannelSelectDefault +#endif + +//***************************************************************************** +// +// Macros for the USB API. +// +//***************************************************************************** +#ifdef ROM_USBIntStatus +#define MAP_USBIntStatus \ + ROM_USBIntStatus +#else +#define MAP_USBIntStatus \ + USBIntStatus +#endif +#ifdef ROM_USBDevAddrGet +#define MAP_USBDevAddrGet \ + ROM_USBDevAddrGet +#else +#define MAP_USBDevAddrGet \ + USBDevAddrGet +#endif +#ifdef ROM_USBDevAddrSet +#define MAP_USBDevAddrSet \ + ROM_USBDevAddrSet +#else +#define MAP_USBDevAddrSet \ + USBDevAddrSet +#endif +#ifdef ROM_USBDevConnect +#define MAP_USBDevConnect \ + ROM_USBDevConnect +#else +#define MAP_USBDevConnect \ + USBDevConnect +#endif +#ifdef ROM_USBDevDisconnect +#define MAP_USBDevDisconnect \ + ROM_USBDevDisconnect +#else +#define MAP_USBDevDisconnect \ + USBDevDisconnect +#endif +#ifdef ROM_USBDevEndpointConfigSet +#define MAP_USBDevEndpointConfigSet \ + ROM_USBDevEndpointConfigSet +#else +#define MAP_USBDevEndpointConfigSet \ + USBDevEndpointConfigSet +#endif +#ifdef ROM_USBDevEndpointDataAck +#define MAP_USBDevEndpointDataAck \ + ROM_USBDevEndpointDataAck +#else +#define MAP_USBDevEndpointDataAck \ + USBDevEndpointDataAck +#endif +#ifdef ROM_USBDevEndpointStall +#define MAP_USBDevEndpointStall \ + ROM_USBDevEndpointStall +#else +#define MAP_USBDevEndpointStall \ + USBDevEndpointStall +#endif +#ifdef ROM_USBDevEndpointStallClear +#define MAP_USBDevEndpointStallClear \ + ROM_USBDevEndpointStallClear +#else +#define MAP_USBDevEndpointStallClear \ + USBDevEndpointStallClear +#endif +#ifdef ROM_USBDevEndpointStatusClear +#define MAP_USBDevEndpointStatusClear \ + ROM_USBDevEndpointStatusClear +#else +#define MAP_USBDevEndpointStatusClear \ + USBDevEndpointStatusClear +#endif +#ifdef ROM_USBEndpointDataGet +#define MAP_USBEndpointDataGet \ + ROM_USBEndpointDataGet +#else +#define MAP_USBEndpointDataGet \ + USBEndpointDataGet +#endif +#ifdef ROM_USBEndpointDataPut +#define MAP_USBEndpointDataPut \ + ROM_USBEndpointDataPut +#else +#define MAP_USBEndpointDataPut \ + USBEndpointDataPut +#endif +#ifdef ROM_USBEndpointDataSend +#define MAP_USBEndpointDataSend \ + ROM_USBEndpointDataSend +#else +#define MAP_USBEndpointDataSend \ + USBEndpointDataSend +#endif +#ifdef ROM_USBEndpointDataToggleClear +#define MAP_USBEndpointDataToggleClear \ + ROM_USBEndpointDataToggleClear +#else +#define MAP_USBEndpointDataToggleClear \ + USBEndpointDataToggleClear +#endif +#ifdef ROM_USBEndpointStatus +#define MAP_USBEndpointStatus \ + ROM_USBEndpointStatus +#else +#define MAP_USBEndpointStatus \ + USBEndpointStatus +#endif +#ifdef ROM_USBFIFOAddrGet +#define MAP_USBFIFOAddrGet \ + ROM_USBFIFOAddrGet +#else +#define MAP_USBFIFOAddrGet \ + USBFIFOAddrGet +#endif +#ifdef ROM_USBFIFOConfigGet +#define MAP_USBFIFOConfigGet \ + ROM_USBFIFOConfigGet +#else +#define MAP_USBFIFOConfigGet \ + USBFIFOConfigGet +#endif +#ifdef ROM_USBFIFOConfigSet +#define MAP_USBFIFOConfigSet \ + ROM_USBFIFOConfigSet +#else +#define MAP_USBFIFOConfigSet \ + USBFIFOConfigSet +#endif +#ifdef ROM_USBFIFOFlush +#define MAP_USBFIFOFlush \ + ROM_USBFIFOFlush +#else +#define MAP_USBFIFOFlush \ + USBFIFOFlush +#endif +#ifdef ROM_USBFrameNumberGet +#define MAP_USBFrameNumberGet \ + ROM_USBFrameNumberGet +#else +#define MAP_USBFrameNumberGet \ + USBFrameNumberGet +#endif +#ifdef ROM_USBHostAddrGet +#define MAP_USBHostAddrGet \ + ROM_USBHostAddrGet +#else +#define MAP_USBHostAddrGet \ + USBHostAddrGet +#endif +#ifdef ROM_USBHostAddrSet +#define MAP_USBHostAddrSet \ + ROM_USBHostAddrSet +#else +#define MAP_USBHostAddrSet \ + USBHostAddrSet +#endif +#ifdef ROM_USBHostEndpointConfig +#define MAP_USBHostEndpointConfig \ + ROM_USBHostEndpointConfig +#else +#define MAP_USBHostEndpointConfig \ + USBHostEndpointConfig +#endif +#ifdef ROM_USBHostEndpointDataAck +#define MAP_USBHostEndpointDataAck \ + ROM_USBHostEndpointDataAck +#else +#define MAP_USBHostEndpointDataAck \ + USBHostEndpointDataAck +#endif +#ifdef ROM_USBHostEndpointDataToggle +#define MAP_USBHostEndpointDataToggle \ + ROM_USBHostEndpointDataToggle +#else +#define MAP_USBHostEndpointDataToggle \ + USBHostEndpointDataToggle +#endif +#ifdef ROM_USBHostEndpointStatusClear +#define MAP_USBHostEndpointStatusClear \ + ROM_USBHostEndpointStatusClear +#else +#define MAP_USBHostEndpointStatusClear \ + USBHostEndpointStatusClear +#endif +#ifdef ROM_USBHostHubAddrGet +#define MAP_USBHostHubAddrGet \ + ROM_USBHostHubAddrGet +#else +#define MAP_USBHostHubAddrGet \ + USBHostHubAddrGet +#endif +#ifdef ROM_USBHostHubAddrSet +#define MAP_USBHostHubAddrSet \ + ROM_USBHostHubAddrSet +#else +#define MAP_USBHostHubAddrSet \ + USBHostHubAddrSet +#endif +#ifdef ROM_USBHostPwrDisable +#define MAP_USBHostPwrDisable \ + ROM_USBHostPwrDisable +#else +#define MAP_USBHostPwrDisable \ + USBHostPwrDisable +#endif +#ifdef ROM_USBHostPwrEnable +#define MAP_USBHostPwrEnable \ + ROM_USBHostPwrEnable +#else +#define MAP_USBHostPwrEnable \ + USBHostPwrEnable +#endif +#ifdef ROM_USBHostPwrConfig +#define MAP_USBHostPwrConfig \ + ROM_USBHostPwrConfig +#else +#define MAP_USBHostPwrConfig \ + USBHostPwrConfig +#endif +#ifdef ROM_USBHostPwrFaultDisable +#define MAP_USBHostPwrFaultDisable \ + ROM_USBHostPwrFaultDisable +#else +#define MAP_USBHostPwrFaultDisable \ + USBHostPwrFaultDisable +#endif +#ifdef ROM_USBHostPwrFaultEnable +#define MAP_USBHostPwrFaultEnable \ + ROM_USBHostPwrFaultEnable +#else +#define MAP_USBHostPwrFaultEnable \ + USBHostPwrFaultEnable +#endif +#ifdef ROM_USBHostRequestIN +#define MAP_USBHostRequestIN \ + ROM_USBHostRequestIN +#else +#define MAP_USBHostRequestIN \ + USBHostRequestIN +#endif +#ifdef ROM_USBHostRequestStatus +#define MAP_USBHostRequestStatus \ + ROM_USBHostRequestStatus +#else +#define MAP_USBHostRequestStatus \ + USBHostRequestStatus +#endif +#ifdef ROM_USBHostReset +#define MAP_USBHostReset \ + ROM_USBHostReset +#else +#define MAP_USBHostReset \ + USBHostReset +#endif +#ifdef ROM_USBHostResume +#define MAP_USBHostResume \ + ROM_USBHostResume +#else +#define MAP_USBHostResume \ + USBHostResume +#endif +#ifdef ROM_USBHostSpeedGet +#define MAP_USBHostSpeedGet \ + ROM_USBHostSpeedGet +#else +#define MAP_USBHostSpeedGet \ + USBHostSpeedGet +#endif +#ifdef ROM_USBHostSuspend +#define MAP_USBHostSuspend \ + ROM_USBHostSuspend +#else +#define MAP_USBHostSuspend \ + USBHostSuspend +#endif +#ifdef ROM_USBIntDisable +#define MAP_USBIntDisable \ + ROM_USBIntDisable +#else +#define MAP_USBIntDisable \ + USBIntDisable +#endif +#ifdef ROM_USBIntEnable +#define MAP_USBIntEnable \ + ROM_USBIntEnable +#else +#define MAP_USBIntEnable \ + USBIntEnable +#endif +#ifdef ROM_USBDevEndpointConfigGet +#define MAP_USBDevEndpointConfigGet \ + ROM_USBDevEndpointConfigGet +#else +#define MAP_USBDevEndpointConfigGet \ + USBDevEndpointConfigGet +#endif +#ifdef ROM_USBEndpointDMAEnable +#define MAP_USBEndpointDMAEnable \ + ROM_USBEndpointDMAEnable +#else +#define MAP_USBEndpointDMAEnable \ + USBEndpointDMAEnable +#endif +#ifdef ROM_USBEndpointDMADisable +#define MAP_USBEndpointDMADisable \ + ROM_USBEndpointDMADisable +#else +#define MAP_USBEndpointDMADisable \ + USBEndpointDMADisable +#endif +#ifdef ROM_USBEndpointDataAvail +#define MAP_USBEndpointDataAvail \ + ROM_USBEndpointDataAvail +#else +#define MAP_USBEndpointDataAvail \ + USBEndpointDataAvail +#endif +#ifdef ROM_USBOTGHostRequest +#define MAP_USBOTGHostRequest \ + ROM_USBOTGHostRequest +#else +#define MAP_USBOTGHostRequest \ + USBOTGHostRequest +#endif +#ifdef ROM_USBModeGet +#define MAP_USBModeGet \ + ROM_USBModeGet +#else +#define MAP_USBModeGet \ + USBModeGet +#endif +#ifdef ROM_USBEndpointDMAChannel +#define MAP_USBEndpointDMAChannel \ + ROM_USBEndpointDMAChannel +#else +#define MAP_USBEndpointDMAChannel \ + USBEndpointDMAChannel +#endif +#ifdef ROM_USBIntDisableControl +#define MAP_USBIntDisableControl \ + ROM_USBIntDisableControl +#else +#define MAP_USBIntDisableControl \ + USBIntDisableControl +#endif +#ifdef ROM_USBIntEnableControl +#define MAP_USBIntEnableControl \ + ROM_USBIntEnableControl +#else +#define MAP_USBIntEnableControl \ + USBIntEnableControl +#endif +#ifdef ROM_USBIntStatusControl +#define MAP_USBIntStatusControl \ + ROM_USBIntStatusControl +#else +#define MAP_USBIntStatusControl \ + USBIntStatusControl +#endif +#ifdef ROM_USBIntDisableEndpoint +#define MAP_USBIntDisableEndpoint \ + ROM_USBIntDisableEndpoint +#else +#define MAP_USBIntDisableEndpoint \ + USBIntDisableEndpoint +#endif +#ifdef ROM_USBIntEnableEndpoint +#define MAP_USBIntEnableEndpoint \ + ROM_USBIntEnableEndpoint +#else +#define MAP_USBIntEnableEndpoint \ + USBIntEnableEndpoint +#endif +#ifdef ROM_USBIntStatusEndpoint +#define MAP_USBIntStatusEndpoint \ + ROM_USBIntStatusEndpoint +#else +#define MAP_USBIntStatusEndpoint \ + USBIntStatusEndpoint +#endif +#ifdef ROM_USBHostMode +#define MAP_USBHostMode \ + ROM_USBHostMode +#else +#define MAP_USBHostMode \ + USBHostMode +#endif + +//***************************************************************************** +// +// Macros for the Watchdog API. +// +//***************************************************************************** +#ifdef ROM_WatchdogIntClear +#define MAP_WatchdogIntClear \ + ROM_WatchdogIntClear +#else +#define MAP_WatchdogIntClear \ + WatchdogIntClear +#endif +#ifdef ROM_WatchdogRunning +#define MAP_WatchdogRunning \ + ROM_WatchdogRunning +#else +#define MAP_WatchdogRunning \ + WatchdogRunning +#endif +#ifdef ROM_WatchdogEnable +#define MAP_WatchdogEnable \ + ROM_WatchdogEnable +#else +#define MAP_WatchdogEnable \ + WatchdogEnable +#endif +#ifdef ROM_WatchdogResetEnable +#define MAP_WatchdogResetEnable \ + ROM_WatchdogResetEnable +#else +#define MAP_WatchdogResetEnable \ + WatchdogResetEnable +#endif +#ifdef ROM_WatchdogResetDisable +#define MAP_WatchdogResetDisable \ + ROM_WatchdogResetDisable +#else +#define MAP_WatchdogResetDisable \ + WatchdogResetDisable +#endif +#ifdef ROM_WatchdogLock +#define MAP_WatchdogLock \ + ROM_WatchdogLock +#else +#define MAP_WatchdogLock \ + WatchdogLock +#endif +#ifdef ROM_WatchdogUnlock +#define MAP_WatchdogUnlock \ + ROM_WatchdogUnlock +#else +#define MAP_WatchdogUnlock \ + WatchdogUnlock +#endif +#ifdef ROM_WatchdogLockState +#define MAP_WatchdogLockState \ + ROM_WatchdogLockState +#else +#define MAP_WatchdogLockState \ + WatchdogLockState +#endif +#ifdef ROM_WatchdogReloadSet +#define MAP_WatchdogReloadSet \ + ROM_WatchdogReloadSet +#else +#define MAP_WatchdogReloadSet \ + WatchdogReloadSet +#endif +#ifdef ROM_WatchdogReloadGet +#define MAP_WatchdogReloadGet \ + ROM_WatchdogReloadGet +#else +#define MAP_WatchdogReloadGet \ + WatchdogReloadGet +#endif +#ifdef ROM_WatchdogValueGet +#define MAP_WatchdogValueGet \ + ROM_WatchdogValueGet +#else +#define MAP_WatchdogValueGet \ + WatchdogValueGet +#endif +#ifdef ROM_WatchdogIntEnable +#define MAP_WatchdogIntEnable \ + ROM_WatchdogIntEnable +#else +#define MAP_WatchdogIntEnable \ + WatchdogIntEnable +#endif +#ifdef ROM_WatchdogIntStatus +#define MAP_WatchdogIntStatus \ + ROM_WatchdogIntStatus +#else +#define MAP_WatchdogIntStatus \ + WatchdogIntStatus +#endif +#ifdef ROM_WatchdogStallEnable +#define MAP_WatchdogStallEnable \ + ROM_WatchdogStallEnable +#else +#define MAP_WatchdogStallEnable \ + WatchdogStallEnable +#endif +#ifdef ROM_WatchdogStallDisable +#define MAP_WatchdogStallDisable \ + ROM_WatchdogStallDisable +#else +#define MAP_WatchdogStallDisable \ + WatchdogStallDisable +#endif + +//***************************************************************************** +// +// Deprecated ROM functions. +// +//***************************************************************************** +#ifndef DEPRECATED +#define MAP_FlashIntGetStatus \ + MAP_FlashIntStatus +#define MAP_USBDevEndpointConfig \ + MAP_USBDevEndpointConfigSet +#define MAP_USBHostPwrFaultConfig \ + MAP_USBHostPwrConfig +#endif + +#endif // __ROM_MAP_H__ diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/rvmdk/driverlib.lib b/bsp/lm3s_9b9x/Libraries/driverlib/rvmdk/driverlib.lib new file mode 100644 index 0000000000000000000000000000000000000000..0b6f9f04c1fb41b96ec268235c5ba5d0e0bdea17 Binary files /dev/null and b/bsp/lm3s_9b9x/Libraries/driverlib/rvmdk/driverlib.lib differ diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/ssi.c b/bsp/lm3s_9b9x/Libraries/driverlib/ssi.c new file mode 100644 index 0000000000000000000000000000000000000000..8ee31e52e916bf8cf611a8b1120d6e898845d1be --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/ssi.c @@ -0,0 +1,706 @@ +//***************************************************************************** +// +// ssi.c - Driver for Synchronous Serial Interface. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +//***************************************************************************** +// +//! \addtogroup ssi_api +//! @{ +// +//***************************************************************************** + +#include "inc/hw_ints.h" +#include "inc/hw_memmap.h" +#include "inc/hw_ssi.h" +#include "inc/hw_types.h" +#include "driverlib/debug.h" +#include "driverlib/interrupt.h" +#include "driverlib/ssi.h" + +//***************************************************************************** +// +//! Configures the synchronous serial interface. +//! +//! \param ulBase specifies the SSI module base address. +//! \param ulSSIClk is the rate of the clock supplied to the SSI module. +//! \param ulProtocol specifies the data transfer protocol. +//! \param ulMode specifies the mode of operation. +//! \param ulBitRate specifies the clock rate. +//! \param ulDataWidth specifies number of bits transferred per frame. +//! +//! This function configures the synchronous serial interface. It sets +//! the SSI protocol, mode of operation, bit rate, and data width. +//! +//! The \e ulProtocol parameter defines the data frame format. The +//! \e ulProtocol parameter can be one of the following values: +//! \b SSI_FRF_MOTO_MODE_0, \b SSI_FRF_MOTO_MODE_1, \b SSI_FRF_MOTO_MODE_2, +//! \b SSI_FRF_MOTO_MODE_3, \b SSI_FRF_TI, or \b SSI_FRF_NMW. The Motorola +//! frame formats imply the following polarity and phase configurations: +//! +//!
+//! Polarity Phase       Mode
+//!   0       0   SSI_FRF_MOTO_MODE_0
+//!   0       1   SSI_FRF_MOTO_MODE_1
+//!   1       0   SSI_FRF_MOTO_MODE_2
+//!   1       1   SSI_FRF_MOTO_MODE_3
+//! 
+//! +//! The \e ulMode parameter defines the operating mode of the SSI module. The +//! SSI module can operate as a master or slave; if a slave, the SSI can be +//! configured to disable output on its serial output line. The \e ulMode +//! parameter can be one of the following values: \b SSI_MODE_MASTER, +//! \b SSI_MODE_SLAVE, or \b SSI_MODE_SLAVE_OD. +//! +//! The \e ulBitRate parameter defines the bit rate for the SSI. This bit rate +//! must satisfy the following clock ratio criteria: +//! +//! - FSSI >= 2 * bit rate (master mode) +//! - FSSI >= 12 * bit rate (slave modes) +//! +//! where FSSI is the frequency of the clock supplied to the SSI module. +//! +//! The \e ulDataWidth parameter defines the width of the data transfers, and +//! can be a value between 4 and 16, inclusive. +//! +//! The peripheral clock will be the same as the processor clock. This will be +//! the value returned by SysCtlClockGet(), or it can be explicitly hard coded +//! if it is constant and known (to save the code/execution overhead of a call +//! to SysCtlClockGet()). +//! +//! This function replaces the original SSIConfig() API and performs the same +//! actions. A macro is provided in ssi.h to map the original API to +//! this API. +//! +//! \return None. +// +//***************************************************************************** +void +SSIConfigSetExpClk(unsigned long ulBase, unsigned long ulSSIClk, + unsigned long ulProtocol, unsigned long ulMode, + unsigned long ulBitRate, unsigned long ulDataWidth) +{ + unsigned long ulMaxBitRate; + unsigned long ulRegVal; + unsigned long ulPreDiv; + unsigned long ulSCR; + unsigned long ulSPH_SPO; + + // + // Check the arguments. + // + ASSERT((ulBase == SSI0_BASE) || (ulBase == SSI1_BASE)); + ASSERT((ulProtocol == SSI_FRF_MOTO_MODE_0) || + (ulProtocol == SSI_FRF_MOTO_MODE_1) || + (ulProtocol == SSI_FRF_MOTO_MODE_2) || + (ulProtocol == SSI_FRF_MOTO_MODE_3) || + (ulProtocol == SSI_FRF_TI) || + (ulProtocol == SSI_FRF_NMW)); + ASSERT((ulMode == SSI_MODE_MASTER) || + (ulMode == SSI_MODE_SLAVE) || + (ulMode == SSI_MODE_SLAVE_OD)); + ASSERT(((ulMode == SSI_MODE_MASTER) && (ulBitRate <= (ulSSIClk / 2))) || + ((ulMode != SSI_MODE_MASTER) && (ulBitRate <= (ulSSIClk / 12)))); + ASSERT((ulSSIClk / ulBitRate) <= (254 * 256)); + ASSERT((ulDataWidth >= 4) && (ulDataWidth <= 16)); + + // + // Set the mode. + // + ulRegVal = (ulMode == SSI_MODE_SLAVE_OD) ? SSI_CR1_SOD : 0; + ulRegVal |= (ulMode == SSI_MODE_MASTER) ? 0 : SSI_CR1_MS; + HWREG(ulBase + SSI_O_CR1) = ulRegVal; + + // + // Set the clock predivider. + // + ulMaxBitRate = ulSSIClk / ulBitRate; + ulPreDiv = 0; + do + { + ulPreDiv += 2; + ulSCR = (ulMaxBitRate / ulPreDiv) - 1; + } + while(ulSCR > 255); + HWREG(ulBase + SSI_O_CPSR) = ulPreDiv; + + // + // Set protocol and clock rate. + // + ulSPH_SPO = (ulProtocol & 3) << 6; + ulProtocol &= SSI_CR0_FRF_M; + ulRegVal = (ulSCR << 8) | ulSPH_SPO | ulProtocol | (ulDataWidth - 1); + HWREG(ulBase + SSI_O_CR0) = ulRegVal; +} + +//***************************************************************************** +// +//! Enables the synchronous serial interface. +//! +//! \param ulBase specifies the SSI module base address. +//! +//! This function enables operation of the synchronous serial interface. The +//! synchronous serial interface must be configured before it is enabled. +//! +//! \return None. +// +//***************************************************************************** +void +SSIEnable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == SSI0_BASE) || (ulBase == SSI1_BASE)); + + // + // Read-modify-write the enable bit. + // + HWREG(ulBase + SSI_O_CR1) |= SSI_CR1_SSE; +} + +//***************************************************************************** +// +//! Disables the synchronous serial interface. +//! +//! \param ulBase specifies the SSI module base address. +//! +//! This function disables operation of the synchronous serial interface. +//! +//! \return None. +// +//***************************************************************************** +void +SSIDisable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == SSI0_BASE) || (ulBase == SSI1_BASE)); + + // + // Read-modify-write the enable bit. + // + HWREG(ulBase + SSI_O_CR1) &= ~(SSI_CR1_SSE); +} + +//***************************************************************************** +// +//! Registers an interrupt handler for the synchronous serial interface. +//! +//! \param ulBase specifies the SSI module base address. +//! \param pfnHandler is a pointer to the function to be called when the +//! synchronous serial interface interrupt occurs. +//! +//! This sets the handler to be called when an SSI interrupt +//! occurs. This will enable the global interrupt in the interrupt controller; +//! specific SSI interrupts must be enabled via SSIIntEnable(). If necessary, +//! it is the interrupt handler's responsibility to clear the interrupt source +//! via SSIIntClear(). +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +SSIIntRegister(unsigned long ulBase, void (*pfnHandler)(void)) +{ + unsigned long ulInt; + + // + // Check the arguments. + // + ASSERT((ulBase == SSI0_BASE) || (ulBase == SSI1_BASE)); + + // + // Determine the interrupt number based on the SSI port. + // + ulInt = (ulBase == SSI0_BASE) ? INT_SSI0 : INT_SSI1; + + // + // Register the interrupt handler, returning an error if an error occurs. + // + IntRegister(ulInt, pfnHandler); + + // + // Enable the synchronous serial interface interrupt. + // + IntEnable(ulInt); +} + +//***************************************************************************** +// +//! Unregisters an interrupt handler for the synchronous serial interface. +//! +//! \param ulBase specifies the SSI module base address. +//! +//! This function will clear the handler to be called when a SSI +//! interrupt occurs. This will also mask off the interrupt in the interrupt +//! controller so that the interrupt handler no longer is called. +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +SSIIntUnregister(unsigned long ulBase) +{ + unsigned long ulInt; + + // + // Check the arguments. + // + ASSERT((ulBase == SSI0_BASE) || (ulBase == SSI1_BASE)); + + // + // Determine the interrupt number based on the SSI port. + // + ulInt = (ulBase == SSI0_BASE) ? INT_SSI0 : INT_SSI1; + + // + // Disable the interrupt. + // + IntDisable(ulInt); + + // + // Unregister the interrupt handler. + // + IntUnregister(ulInt); +} + +//***************************************************************************** +// +//! Enables individual SSI interrupt sources. +//! +//! \param ulBase specifies the SSI module base address. +//! \param ulIntFlags is a bit mask of the interrupt sources to be enabled. +//! +//! Enables the indicated SSI interrupt sources. Only the sources that are +//! enabled can be reflected to the processor interrupt; disabled sources have +//! no effect on the processor. The \e ulIntFlags parameter can be any of the +//! \b SSI_TXFF, \b SSI_RXFF, \b SSI_RXTO, or \b SSI_RXOR values. +//! +//! \return None. +// +//***************************************************************************** +void +SSIIntEnable(unsigned long ulBase, unsigned long ulIntFlags) +{ + // + // Check the arguments. + // + ASSERT((ulBase == SSI0_BASE) || (ulBase == SSI1_BASE)); + + // + // Enable the specified interrupts. + // + HWREG(ulBase + SSI_O_IM) |= ulIntFlags; +} + +//***************************************************************************** +// +//! Disables individual SSI interrupt sources. +//! +//! \param ulBase specifies the SSI module base address. +//! \param ulIntFlags is a bit mask of the interrupt sources to be disabled. +//! +//! Disables the indicated SSI interrupt sources. The \e ulIntFlags parameter +//! can be any of the \b SSI_TXFF, \b SSI_RXFF, \b SSI_RXTO, or \b SSI_RXOR +//! values. +//! +//! \return None. +// +//***************************************************************************** +void +SSIIntDisable(unsigned long ulBase, unsigned long ulIntFlags) +{ + // + // Check the arguments. + // + ASSERT((ulBase == SSI0_BASE) || (ulBase == SSI1_BASE)); + + // + // Disable the specified interrupts. + // + HWREG(ulBase + SSI_O_IM) &= ~(ulIntFlags); +} + +//***************************************************************************** +// +//! Gets the current interrupt status. +//! +//! \param ulBase specifies the SSI module base address. +//! \param bMasked is \b false if the raw interrupt status is required or +//! \b true if the masked interrupt status is required. +//! +//! This function returns the interrupt status for the SSI module. Either the +//! raw interrupt status or the status of interrupts that are allowed to +//! reflect to the processor can be returned. +//! +//! \return The current interrupt status, enumerated as a bit field of +//! \b SSI_TXFF, \b SSI_RXFF, \b SSI_RXTO, and \b SSI_RXOR. +// +//***************************************************************************** +unsigned long +SSIIntStatus(unsigned long ulBase, tBoolean bMasked) +{ + // + // Check the arguments. + // + ASSERT((ulBase == SSI0_BASE) || (ulBase == SSI1_BASE)); + + // + // Return either the interrupt status or the raw interrupt status as + // requested. + // + if(bMasked) + { + return(HWREG(ulBase + SSI_O_MIS)); + } + else + { + return(HWREG(ulBase + SSI_O_RIS)); + } +} + +//***************************************************************************** +// +//! Clears SSI interrupt sources. +//! +//! \param ulBase specifies the SSI module base address. +//! \param ulIntFlags is a bit mask of the interrupt sources to be cleared. +//! +//! The specified SSI interrupt sources are cleared so that they no longer +//! assert. This function must be called in the interrupt handler to keep the +//! interrupts from being recognized again immediately upon exit. The +//! \e ulIntFlags parameter can consist of either or both the \b SSI_RXTO and +//! \b SSI_RXOR values. +//! +//! \note Since there is a write buffer in the Cortex-M3 processor, it may take +//! several clock cycles before the interrupt source is actually cleared. +//! Therefore, it is recommended that the interrupt source be cleared early in +//! the interrupt handler (as opposed to the very last action) to avoid +//! returning from the interrupt handler before the interrupt source is +//! actually cleared. Failure to do so may result in the interrupt handler +//! being immediately reentered (since NVIC still sees the interrupt source +//! asserted). +//! +//! \return None. +// +//***************************************************************************** +void +SSIIntClear(unsigned long ulBase, unsigned long ulIntFlags) +{ + // + // Check the arguments. + // + ASSERT((ulBase == SSI0_BASE) || (ulBase == SSI1_BASE)); + + // + // Clear the requested interrupt sources. + // + HWREG(ulBase + SSI_O_ICR) = ulIntFlags; +} + +//***************************************************************************** +// +//! Puts a data element into the SSI transmit FIFO. +//! +//! \param ulBase specifies the SSI module base address. +//! \param ulData is the data to be transmitted over the SSI interface. +//! +//! This function places the supplied data into the transmit FIFO of the +//! specified SSI module. +//! +//! \note The upper 32 - N bits of the \e ulData are discarded by the hardware, +//! where N is the data width as configured by SSIConfigSetExpClk(). For +//! example, if the interface is configured for 8-bit data width, the upper 24 +//! bits of \e ulData are discarded. +//! +//! \return None. +// +//***************************************************************************** +void +SSIDataPut(unsigned long ulBase, unsigned long ulData) +{ + // + // Check the arguments. + // + ASSERT((ulBase == SSI0_BASE) || (ulBase == SSI1_BASE)); + ASSERT((ulData & (0xfffffffe << (HWREG(ulBase + SSI_O_CR0) & + SSI_CR0_DSS_M))) == 0); + + // + // Wait until there is space. + // + while(!(HWREG(ulBase + SSI_O_SR) & SSI_SR_TNF)) + { + } + + // + // Write the data to the SSI. + // + HWREG(ulBase + SSI_O_DR) = ulData; +} + +//***************************************************************************** +// +//! Puts a data element into the SSI transmit FIFO. +//! +//! \param ulBase specifies the SSI module base address. +//! \param ulData is the data to be transmitted over the SSI interface. +//! +//! This function places the supplied data into the transmit FIFO of the +//! specified SSI module. If there is no space in the FIFO, then this function +//! returns a zero. +//! +//! This function replaces the original SSIDataNonBlockingPut() API and +//! performs the same actions. A macro is provided in ssi.h to map +//! the original API to this API. +//! +//! \note The upper 32 - N bits of the \e ulData are discarded by the hardware, +//! where N is the data width as configured by SSIConfigSetExpClk(). For +//! example, if the interface is configured for 8-bit data width, the upper 24 +//! bits of \e ulData are discarded. +//! +//! \return Returns the number of elements written to the SSI transmit FIFO. +// +//***************************************************************************** +long +SSIDataPutNonBlocking(unsigned long ulBase, unsigned long ulData) +{ + // + // Check the arguments. + // + ASSERT((ulBase == SSI0_BASE) || (ulBase == SSI1_BASE)); + ASSERT((ulData & (0xfffffffe << (HWREG(ulBase + SSI_O_CR0) & + SSI_CR0_DSS_M))) == 0); + + // + // Check for space to write. + // + if(HWREG(ulBase + SSI_O_SR) & SSI_SR_TNF) + { + HWREG(ulBase + SSI_O_DR) = ulData; + return(1); + } + else + { + return(0); + } +} + +//***************************************************************************** +// +//! Gets a data element from the SSI receive FIFO. +//! +//! \param ulBase specifies the SSI module base address. +//! \param pulData is a pointer to a storage location for data that was +//! received over the SSI interface. +//! +//! This function gets received data from the receive FIFO of the specified +//! SSI module and places that data into the location specified by the +//! \e pulData parameter. +//! +//! \note Only the lower N bits of the value written to \e pulData contain +//! valid data, where N is the data width as configured by +//! SSIConfigSetExpClk(). For example, if the interface is configured for +//! 8-bit data width, only the lower 8 bits of the value written to \e pulData +//! contain valid data. +//! +//! \return None. +// +//***************************************************************************** +void +SSIDataGet(unsigned long ulBase, unsigned long *pulData) +{ + // + // Check the arguments. + // + ASSERT((ulBase == SSI0_BASE) || (ulBase == SSI1_BASE)); + + // + // Wait until there is data to be read. + // + while(!(HWREG(ulBase + SSI_O_SR) & SSI_SR_RNE)) + { + } + + // + // Read data from SSI. + // + *pulData = HWREG(ulBase + SSI_O_DR); +} + +//***************************************************************************** +// +//! Gets a data element from the SSI receive FIFO. +//! +//! \param ulBase specifies the SSI module base address. +//! \param pulData is a pointer to a storage location for data that was +//! received over the SSI interface. +//! +//! This function gets received data from the receive FIFO of the specified SSI +//! module and places that data into the location specified by the \e ulData +//! parameter. If there is no data in the FIFO, then this function returns a +//! zero. +//! +//! This function replaces the original SSIDataNonBlockingGet() API and +//! performs the same actions. A macro is provided in ssi.h to map +//! the original API to this API. +//! +//! \note Only the lower N bits of the value written to \e pulData contain +//! valid data, where N is the data width as configured by +//! SSIConfigSetExpClk(). For example, if the interface is configured for +//! 8-bit data width, only the lower 8 bits of the value written to \e pulData +//! contain valid data. +//! +//! \return Returns the number of elements read from the SSI receive FIFO. +// +//***************************************************************************** +long +SSIDataGetNonBlocking(unsigned long ulBase, unsigned long *pulData) +{ + // + // Check the arguments. + // + ASSERT((ulBase == SSI0_BASE) || (ulBase == SSI1_BASE)); + + // + // Check for data to read. + // + if(HWREG(ulBase + SSI_O_SR) & SSI_SR_RNE) + { + *pulData = HWREG(ulBase + SSI_O_DR); + return(1); + } + else + { + return(0); + } +} + +//***************************************************************************** +// +//! Enable SSI DMA operation. +//! +//! \param ulBase is the base address of the SSI port. +//! \param ulDMAFlags is a bit mask of the DMA features to enable. +//! +//! The specified SSI DMA features are enabled. The SSI can be +//! configured to use DMA for transmit and/or receive data transfers. +//! The \e ulDMAFlags parameter is the logical OR of any of the following +//! values: +//! +//! - SSI_DMA_RX - enable DMA for receive +//! - SSI_DMA_TX - enable DMA for transmit +//! +//! \note The uDMA controller must also be set up before DMA can be used +//! with the SSI. +//! +//! \return None. +// +//***************************************************************************** +void +SSIDMAEnable(unsigned long ulBase, unsigned long ulDMAFlags) +{ + // + // Check the arguments. + // + ASSERT((ulBase == SSI0_BASE) || (ulBase == SSI1_BASE)); + + // + // Set the requested bits in the UART DMA control register. + // + HWREG(ulBase + SSI_O_DMACTL) |= ulDMAFlags; +} + +//***************************************************************************** +// +//! Disable SSI DMA operation. +//! +//! \param ulBase is the base address of the SSI port. +//! \param ulDMAFlags is a bit mask of the DMA features to disable. +//! +//! This function is used to disable SSI DMA features that were enabled +//! by SSIDMAEnable(). The specified SSI DMA features are disabled. The +//! \e ulDMAFlags parameter is the logical OR of any of the following values: +//! +//! - SSI_DMA_RX - disable DMA for receive +//! - SSI_DMA_TX - disable DMA for transmit +//! +//! \return None. +// +//***************************************************************************** +void +SSIDMADisable(unsigned long ulBase, unsigned long ulDMAFlags) +{ + // + // Check the arguments. + // + ASSERT((ulBase == SSI0_BASE) || (ulBase == SSI1_BASE)); + + // + // Clear the requested bits in the UART DMA control register. + // + HWREG(ulBase + SSI_O_DMACTL) &= ~ulDMAFlags; +} + +//***************************************************************************** +// +//! Determines whether the SSI transmitter is busy or not. +//! +//! \param ulBase is the base address of the SSI port. +//! +//! Allows the caller to determine whether all transmitted bytes have cleared +//! the transmitter hardware. If \b false is returned, then the transmit FIFO +//! is empty and all bits of the last transmitted word have left the hardware +//! shift register. +//! +//! \return Returns \b true if the SSI is transmitting or \b false if all +//! transmissions are complete. +// +//***************************************************************************** +tBoolean +SSIBusy(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == SSI0_BASE) || (ulBase == SSI1_BASE)); + + // + // Determine if the SSI is busy. + // + return((HWREG(ulBase + SSI_O_SR) & SSI_SR_BSY) ? true : false); +} + +//***************************************************************************** +// +// Close the Doxygen group. +//! @} +// +//***************************************************************************** diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/ssi.h b/bsp/lm3s_9b9x/Libraries/driverlib/ssi.h new file mode 100644 index 0000000000000000000000000000000000000000..6f409224cde81dce319f6d087f9687162161f201 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/ssi.h @@ -0,0 +1,125 @@ +//***************************************************************************** +// +// ssi.h - Prototypes for the Synchronous Serial Interface Driver. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +#ifndef __SSI_H__ +#define __SSI_H__ + +//***************************************************************************** +// +// If building with a C++ compiler, make all of the definitions in this header +// have a C binding. +// +//***************************************************************************** +#ifdef __cplusplus +extern "C" +{ +#endif + +//***************************************************************************** +// +// Values that can be passed to SSIIntEnable, SSIIntDisable, and SSIIntClear +// as the ulIntFlags parameter, and returned by SSIIntStatus. +// +//***************************************************************************** +#define SSI_TXFF 0x00000008 // TX FIFO half full or less +#define SSI_RXFF 0x00000004 // RX FIFO half full or more +#define SSI_RXTO 0x00000002 // RX timeout +#define SSI_RXOR 0x00000001 // RX overrun + +//***************************************************************************** +// +// Values that can be passed to SSIConfigSetExpClk. +// +//***************************************************************************** +#define SSI_FRF_MOTO_MODE_0 0x00000000 // Moto fmt, polarity 0, phase 0 +#define SSI_FRF_MOTO_MODE_1 0x00000002 // Moto fmt, polarity 0, phase 1 +#define SSI_FRF_MOTO_MODE_2 0x00000001 // Moto fmt, polarity 1, phase 0 +#define SSI_FRF_MOTO_MODE_3 0x00000003 // Moto fmt, polarity 1, phase 1 +#define SSI_FRF_TI 0x00000010 // TI frame format +#define SSI_FRF_NMW 0x00000020 // National MicroWire frame format + +#define SSI_MODE_MASTER 0x00000000 // SSI master +#define SSI_MODE_SLAVE 0x00000001 // SSI slave +#define SSI_MODE_SLAVE_OD 0x00000002 // SSI slave with output disabled + +//***************************************************************************** +// +// Values that can be passed to SSIDMAEnable() and SSIDMADisable(). +// +//***************************************************************************** +#define SSI_DMA_TX 0x00000002 // Enable DMA for transmit +#define SSI_DMA_RX 0x00000001 // Enable DMA for receive + +//***************************************************************************** +// +// Prototypes for the APIs. +// +//***************************************************************************** +extern void SSIConfigSetExpClk(unsigned long ulBase, unsigned long ulSSIClk, + unsigned long ulProtocol, unsigned long ulMode, + unsigned long ulBitRate, + unsigned long ulDataWidth); +extern void SSIDataGet(unsigned long ulBase, unsigned long *pulData); +extern long SSIDataGetNonBlocking(unsigned long ulBase, + unsigned long *pulData); +extern void SSIDataPut(unsigned long ulBase, unsigned long ulData); +extern long SSIDataPutNonBlocking(unsigned long ulBase, unsigned long ulData); +extern void SSIDisable(unsigned long ulBase); +extern void SSIEnable(unsigned long ulBase); +extern void SSIIntClear(unsigned long ulBase, unsigned long ulIntFlags); +extern void SSIIntDisable(unsigned long ulBase, unsigned long ulIntFlags); +extern void SSIIntEnable(unsigned long ulBase, unsigned long ulIntFlags); +extern void SSIIntRegister(unsigned long ulBase, void(*pfnHandler)(void)); +extern unsigned long SSIIntStatus(unsigned long ulBase, tBoolean bMasked); +extern void SSIIntUnregister(unsigned long ulBase); +extern void SSIDMAEnable(unsigned long ulBase, unsigned long ulDMAFlags); +extern void SSIDMADisable(unsigned long ulBase, unsigned long ulDMAFlags); +extern tBoolean SSIBusy(unsigned long ulBase); + +//***************************************************************************** +// +// Several SSI APIs have been renamed, with the original function name being +// deprecated. These defines provide backward compatibility. +// +//***************************************************************************** +#ifndef DEPRECATED +#include "driverlib/sysctl.h" +#define SSIConfig(a, b, c, d, e) \ + SSIConfigSetExpClk(a, SysCtlClockGet(), b, c, d, e) +#define SSIDataNonBlockingGet(a, b) \ + SSIDataGetNonBlocking(a, b) +#define SSIDataNonBlockingPut(a, b) \ + SSIDataPutNonBlocking(a, b) +#endif + +//***************************************************************************** +// +// Mark the end of the C bindings section for C++ compilers. +// +//***************************************************************************** +#ifdef __cplusplus +} +#endif + +#endif // __SSI_H__ diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/sysctl.c b/bsp/lm3s_9b9x/Libraries/driverlib/sysctl.c new file mode 100644 index 0000000000000000000000000000000000000000..a0d37d1eb99925ac66559ec338c763cadec0fb83 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/sysctl.c @@ -0,0 +1,2365 @@ +//***************************************************************************** +// +// sysctl.c - Driver for the system controller. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +//***************************************************************************** +// +//! \addtogroup sysctl_api +//! @{ +// +//***************************************************************************** + +#include "inc/hw_ints.h" +#include "inc/hw_nvic.h" +#include "inc/hw_sysctl.h" +#include "inc/hw_types.h" +#include "driverlib/cpu.h" +#include "driverlib/debug.h" +#include "driverlib/interrupt.h" +#include "driverlib/sysctl.h" + +//***************************************************************************** +// +// This macro extracts the array index out of the peripheral number. +// +//***************************************************************************** +#define SYSCTL_PERIPH_INDEX(a) (((a) >> 28) & 0xf) + +//***************************************************************************** +// +// This macro constructs the peripheral bit mask from the peripheral number. +// +//***************************************************************************** +#define SYSCTL_PERIPH_MASK(a) (((a) & 0xffff) << (((a) & 0x001f0000) >> 16)) + +//***************************************************************************** +// +// An array that maps the "peripheral set" number (which is stored in the upper +// nibble of the SYSCTL_PERIPH_* defines) to the SYSCTL DC? register that +// contains the peripheral present bit for that peripheral. +// +//***************************************************************************** +static const unsigned long g_pulDCRegs[] = +{ + SYSCTL_DC1, + SYSCTL_DC2, + SYSCTL_DC4, + SYSCTL_DC1 +}; + +//***************************************************************************** +// +// An array that maps the "peripheral set" number (which is stored in the upper +// nibble of the SYSCTL_PERIPH_* defines) to the SYSCTL_SRCR? register that +// controls the software reset for that peripheral. +// +//***************************************************************************** +static const unsigned long g_pulSRCRRegs[] = +{ + SYSCTL_SRCR0, + SYSCTL_SRCR1, + SYSCTL_SRCR2 +}; + +//***************************************************************************** +// +// An array that maps the "peripheral set" number (which is stored in the upper +// nibble of the SYSCTL_PERIPH_* defines) to the SYSCTL_RCGC? register that +// controls the run-mode enable for that peripheral. +// +//***************************************************************************** +static const unsigned long g_pulRCGCRegs[] = +{ + SYSCTL_RCGC0, + SYSCTL_RCGC1, + SYSCTL_RCGC2 +}; + +//***************************************************************************** +// +// An array that maps the "peripheral set" number (which is stored in the upper +// nibble of the SYSCTL_PERIPH_* defines) to the SYSCTL_SCGC? register that +// controls the sleep-mode enable for that peripheral. +// +//***************************************************************************** +static const unsigned long g_pulSCGCRegs[] = +{ + SYSCTL_SCGC0, + SYSCTL_SCGC1, + SYSCTL_SCGC2 +}; + +//***************************************************************************** +// +// An array that maps the "peripheral set" number (which is stored in the upper +// nibble of the SYSCTL_PERIPH_* defines) to the SYSCTL_DCGC? register that +// controls the deep-sleep-mode enable for that peripheral. +// +//***************************************************************************** +static const unsigned long g_pulDCGCRegs[] = +{ + SYSCTL_DCGC0, + SYSCTL_DCGC1, + SYSCTL_DCGC2 +}; + +//***************************************************************************** +// +// An array that maps the crystal number in RCC to a frequency. +// +//***************************************************************************** +static const unsigned long g_pulXtals[] = +{ + 1000000, + 1843200, + 2000000, + 2457600, + 3579545, + 3686400, + 4000000, + 4096000, + 4915200, + 5000000, + 5120000, + 6000000, + 6144000, + 7372800, + 8000000, + 8192000, + 10000000, + 12000000, + 12288000, + 13560000, + 14318180, + 16000000, + 16384000 +}; + +//***************************************************************************** +// +//! \internal +//! Checks a peripheral identifier. +//! +//! \param ulPeripheral is the peripheral identifier. +//! +//! This function determines if a peripheral identifier is valid. +//! +//! \return Returns \b true if the peripheral identifier is valid and \b false +//! otherwise. +// +//***************************************************************************** +#ifdef DEBUG +static tBoolean +SysCtlPeripheralValid(unsigned long ulPeripheral) +{ + return((ulPeripheral == SYSCTL_PERIPH_ADC0) || + (ulPeripheral == SYSCTL_PERIPH_ADC1) || + (ulPeripheral == SYSCTL_PERIPH_CAN0) || + (ulPeripheral == SYSCTL_PERIPH_CAN1) || + (ulPeripheral == SYSCTL_PERIPH_CAN2) || + (ulPeripheral == SYSCTL_PERIPH_COMP0) || + (ulPeripheral == SYSCTL_PERIPH_COMP1) || + (ulPeripheral == SYSCTL_PERIPH_COMP2) || + (ulPeripheral == SYSCTL_PERIPH_EPI0) || + (ulPeripheral == SYSCTL_PERIPH_ETH) || + (ulPeripheral == SYSCTL_PERIPH_GPIOA) || + (ulPeripheral == SYSCTL_PERIPH_GPIOB) || + (ulPeripheral == SYSCTL_PERIPH_GPIOC) || + (ulPeripheral == SYSCTL_PERIPH_GPIOD) || + (ulPeripheral == SYSCTL_PERIPH_GPIOE) || + (ulPeripheral == SYSCTL_PERIPH_GPIOF) || + (ulPeripheral == SYSCTL_PERIPH_GPIOG) || + (ulPeripheral == SYSCTL_PERIPH_GPIOH) || + (ulPeripheral == SYSCTL_PERIPH_GPIOJ) || + (ulPeripheral == SYSCTL_PERIPH_HIBERNATE) || + (ulPeripheral == SYSCTL_PERIPH_I2C0) || + (ulPeripheral == SYSCTL_PERIPH_I2C1) || + (ulPeripheral == SYSCTL_PERIPH_I2S0) || + (ulPeripheral == SYSCTL_PERIPH_IEEE1588) || + (ulPeripheral == SYSCTL_PERIPH_MPU) || + (ulPeripheral == SYSCTL_PERIPH_PLL) || + (ulPeripheral == SYSCTL_PERIPH_PWM) || + (ulPeripheral == SYSCTL_PERIPH_QEI0) || + (ulPeripheral == SYSCTL_PERIPH_QEI1) || + (ulPeripheral == SYSCTL_PERIPH_SSI0) || + (ulPeripheral == SYSCTL_PERIPH_SSI1) || + (ulPeripheral == SYSCTL_PERIPH_TEMP) || + (ulPeripheral == SYSCTL_PERIPH_TIMER0) || + (ulPeripheral == SYSCTL_PERIPH_TIMER1) || + (ulPeripheral == SYSCTL_PERIPH_TIMER2) || + (ulPeripheral == SYSCTL_PERIPH_TIMER3) || + (ulPeripheral == SYSCTL_PERIPH_UART0) || + (ulPeripheral == SYSCTL_PERIPH_UART1) || + (ulPeripheral == SYSCTL_PERIPH_UART2) || + (ulPeripheral == SYSCTL_PERIPH_UDMA) || + (ulPeripheral == SYSCTL_PERIPH_USB0) || + (ulPeripheral == SYSCTL_PERIPH_WDOG0) || + (ulPeripheral == SYSCTL_PERIPH_WDOG1)); +} +#endif + +//***************************************************************************** +// +//! Gets the size of the SRAM. +//! +//! This function determines the size of the SRAM on the Stellaris device. +//! +//! \return The total number of bytes of SRAM. +// +//***************************************************************************** +unsigned long +SysCtlSRAMSizeGet(void) +{ + // + // Compute the size of the SRAM. + // + return(((HWREG(SYSCTL_DC0) & SYSCTL_DC0_SRAMSZ_M) >> 8) + 0x100); +} + +//***************************************************************************** +// +//! Gets the size of the flash. +//! +//! This function determines the size of the flash on the Stellaris device. +//! +//! \return The total number of bytes of flash. +// +//***************************************************************************** +unsigned long +SysCtlFlashSizeGet(void) +{ + // + // Compute the size of the flash. + // + return(((HWREG(SYSCTL_DC0) & SYSCTL_DC0_FLASHSZ_M) << 11) + 0x800); +} + +//***************************************************************************** +// +//! Determines if a pin is present. +//! +//! \param ulPin is the pin in question. +//! +//! Determines if a particular pin is present in the device. The PWM, analog +//! comparators, ADC, and timers have a varying number of pins across members +//! of the Stellaris family; this will determine which are present on this +//! device. +//! +//! The \e ulPin argument must be only one of the following values: +//! \b SYSCTL_PIN_PWM0, \b SYSCTL_PIN_PWM1, \b SYSCTL_PIN_PWM2, +//! \b SYSCTL_PIN_PWM3, \b SYSCTL_PIN_PWM4, \b SYSCTL_PIN_PWM5, +//! \b SYSCTL_PIN_C0MINUS, \b SYSCTL_PIN_C0PLUS, \b SYSCTL_PIN_C0O, +//! \b SYSCTL_PIN_C1MINUS, \b SYSCTL_PIN_C1PLUS, \b SYSCTL_PIN_C1O, +//! \b SYSCTL_PIN_C2MINUS, \b SYSCTL_PIN_C2PLUS, \b SYSCTL_PIN_C2O, +//! \b SYSCTL_PIN_ADC0, \b SYSCTL_PIN_ADC1, \b SYSCTL_PIN_ADC2, +//! \b SYSCTL_PIN_ADC3, \b SYSCTL_PIN_ADC4, \b SYSCTL_PIN_ADC5, +//! \b SYSCTL_PIN_ADC6, \b SYSCTL_PIN_ADC7, \b SYSCTL_PIN_CCP0, +//! \b SYSCTL_PIN_CCP1, \b SYSCTL_PIN_CCP2, \b SYSCTL_PIN_CCP3, +//! \b SYSCTL_PIN_CCP4, \b SYSCTL_PIN_CCP5, \b SYSCTL_PIN_CCP6, +//! \b SYSCTL_PIN_CCP7, \b SYSCTL_PIN_32KHZ, or \b SYSCTL_PIN_MC_FAULT0. +//! +//! \return Returns \b true if the specified pin is present and \b false if it +//! is not. +// +//***************************************************************************** +tBoolean +SysCtlPinPresent(unsigned long ulPin) +{ + // + // Check the arguments. + // + ASSERT((ulPin == SYSCTL_PIN_PWM0) || + (ulPin == SYSCTL_PIN_PWM1) || + (ulPin == SYSCTL_PIN_PWM2) || + (ulPin == SYSCTL_PIN_PWM3) || + (ulPin == SYSCTL_PIN_PWM4) || + (ulPin == SYSCTL_PIN_PWM5) || + (ulPin == SYSCTL_PIN_C0MINUS) || + (ulPin == SYSCTL_PIN_C0PLUS) || + (ulPin == SYSCTL_PIN_C0O) || + (ulPin == SYSCTL_PIN_C1MINUS) || + (ulPin == SYSCTL_PIN_C1PLUS) || + (ulPin == SYSCTL_PIN_C1O) || + (ulPin == SYSCTL_PIN_C2MINUS) || + (ulPin == SYSCTL_PIN_C2PLUS) || + (ulPin == SYSCTL_PIN_C2O) || + (ulPin == SYSCTL_PIN_MC_FAULT0) || + (ulPin == SYSCTL_PIN_ADC0) || + (ulPin == SYSCTL_PIN_ADC1) || + (ulPin == SYSCTL_PIN_ADC2) || + (ulPin == SYSCTL_PIN_ADC3) || + (ulPin == SYSCTL_PIN_ADC4) || + (ulPin == SYSCTL_PIN_ADC5) || + (ulPin == SYSCTL_PIN_ADC6) || + (ulPin == SYSCTL_PIN_ADC7) || + (ulPin == SYSCTL_PIN_CCP0) || + (ulPin == SYSCTL_PIN_CCP1) || + (ulPin == SYSCTL_PIN_CCP2) || + (ulPin == SYSCTL_PIN_CCP3) || + (ulPin == SYSCTL_PIN_CCP4) || + (ulPin == SYSCTL_PIN_CCP5) || + (ulPin == SYSCTL_PIN_32KHZ)); + + // + // Determine if this pin is present. + // + if(HWREG(SYSCTL_DC3) & ulPin) + { + return(true); + } + else + { + return(false); + } +} + +//***************************************************************************** +// +//! Determines if a peripheral is present. +//! +//! \param ulPeripheral is the peripheral in question. +//! +//! Determines if a particular peripheral is present in the device. Each +//! member of the Stellaris family has a different peripheral set; this will +//! determine which are present on this device. +//! +//! The \e ulPeripheral parameter must be only one of the following values: +//! \b SYSCTL_PERIPH_ADC0, \b SYSCTL_PERIPH_ADC1, \b SYSCTL_PERIPH_CAN0, +//! \b SYSCTL_PERIPH_CAN1, \b SYSCTL_PERIPH_CAN2, \b SYSCTL_PERIPH_COMP0, +//! \b SYSCTL_PERIPH_COMP1, \b SYSCTL_PERIPH_COMP2, \b SYSCTL_PERIPH_EPI0, +//! \b SYSCTL_PERIPH_ETH, \b SYSCTL_PERIPH_GPIOA, \b SYSCTL_PERIPH_GPIOB, +//! \b SYSCTL_PERIPH_GPIOC, \b SYSCTL_PERIPH_GPIOD, \b SYSCTL_PERIPH_GPIOE, +//! \b SYSCTL_PERIPH_GPIOF, \b SYSCTL_PERIPH_GPIOG, \b SYSCTL_PERIPH_GPIOH, +//! \b SYSCTL_PERIPH_GPIOJ, \b SYSCTL_PERIPH_HIBERNATE, \b SYSCTL_PERIPH_I2C0, +//! \b SYSCTL_PERIPH_I2C1, \b SYSCTL_PERIPH_I2S0, \b SYSCTL_PERIPH_IEEE1588, +//! \b SYSCTL_PERIPH_MPU, \b SYSCTL_PERIPH_PLL, \b SYSCTL_PERIPH_PWM, +//! \b SYSCTL_PERIPH_QEI0, \b SYSCTL_PERIPH_QEI1, \b SYSCTL_PERIPH_SSI0, +//! \b SYSCTL_PERIPH_SSI1, \b SYSCTL_PERIPH_TIMER0, \b SYSCTL_PERIPH_TIMER1, +//! \b SYSCTL_PERIPH_TIMER2, \b SYSCTL_PERIPH_TIMER3, \b SYSCTL_PERIPH_TEMP, +//! \b SYSCTL_PERIPH_UART0, \b SYSCTL_PERIPH_UART1, \b SYSCTL_PERIPH_UART2, +//! \b SYSCTL_PERIPH_UDMA, \b SYSCTL_PERIPH_USB0, \b SYSCTL_PERIPH_WDOG0, or +//! \b SYSCTL_PERIPH_WDOG1. +//! +//! \return Returns \b true if the specified peripheral is present and \b false +//! if it is not. +// +//***************************************************************************** +tBoolean +SysCtlPeripheralPresent(unsigned long ulPeripheral) +{ + // + // Check the arguments. + // + ASSERT(SysCtlPeripheralValid(ulPeripheral)); + + // + // Read the correct DC register and determine if this peripheral exists. + // + if(ulPeripheral == SYSCTL_PERIPH_USB0) + { + // + // USB is a special case since the DC bit is missing for USB0. + // + if(HWREG(SYSCTL_DC6) & SYSCTL_DC6_USB0_M) + { + return(true); + } + else + { + return(false); + } + } + else if(HWREG(g_pulDCRegs[SYSCTL_PERIPH_INDEX(ulPeripheral)]) & + SYSCTL_PERIPH_MASK(ulPeripheral)) + { + return(true); + } + else + { + return(false); + } +} + +//***************************************************************************** +// +//! Performs a software reset of a peripheral. +//! +//! \param ulPeripheral is the peripheral to reset. +//! +//! This function performs a software reset of the specified peripheral. An +//! individual peripheral reset signal is asserted for a brief period and then +//! deasserted, returning the internal state of the peripheral to its reset +//! condition. +//! +//! The \e ulPeripheral parameter must be only one of the following values: +//! \b SYSCTL_PERIPH_ADC0, \b SYSCTL_PERIPH_ADC1, \b SYSCTL_PERIPH_CAN0, +//! \b SYSCTL_PERIPH_CAN1, \b SYSCTL_PERIPH_CAN2, \b SYSCTL_PERIPH_COMP0, +//! \b SYSCTL_PERIPH_COMP1, \b SYSCTL_PERIPH_COMP2, \b SYSCTL_PERIPH_EPI0, +//! \b SYSCTL_PERIPH_ETH, \b SYSCTL_PERIPH_GPIOA, \b SYSCTL_PERIPH_GPIOB, +//! \b SYSCTL_PERIPH_GPIOC, \b SYSCTL_PERIPH_GPIOD, \b SYSCTL_PERIPH_GPIOE, +//! \b SYSCTL_PERIPH_GPIOF, \b SYSCTL_PERIPH_GPIOG, \b SYSCTL_PERIPH_GPIOH, +//! \b SYSCTL_PERIPH_GPIOJ, \b SYSCTL_PERIPH_HIBERNATE, \b SYSCTL_PERIPH_I2C0, +//! \b SYSCTL_PERIPH_I2C1, \b SYSCTL_PERIPH_I2S0, \b SYSCTL_PERIPH_PWM, +//! \b SYSCTL_PERIPH_QEI0, \b SYSCTL_PERIPH_QEI1, \b SYSCTL_PERIPH_SSI0, +//! \b SYSCTL_PERIPH_SSI1, \b SYSCTL_PERIPH_TIMER0, \b SYSCTL_PERIPH_TIMER1, +//! \b SYSCTL_PERIPH_TIMER2, \b SYSCTL_PERIPH_TIMER3, \b SYSCTL_PERIPH_TEMP, +//! \b SYSCTL_PERIPH_UART0, \b SYSCTL_PERIPH_UART1, \b SYSCTL_PERIPH_UART2, +//! \b SYSCTL_PERIPH_UDMA, \b SYSCTL_PERIPH_USB0, \b SYSCTL_PERIPH_WDOG0, or +//! \b SYSCTL_PERIPH_WDOG1. +//! +//! \return None. +// +//***************************************************************************** +void +SysCtlPeripheralReset(unsigned long ulPeripheral) +{ + volatile unsigned long ulDelay; + + // + // Check the arguments. + // + ASSERT(SysCtlPeripheralValid(ulPeripheral)); + + // + // Put the peripheral into the reset state. + // + HWREG(g_pulSRCRRegs[SYSCTL_PERIPH_INDEX(ulPeripheral)]) |= + SYSCTL_PERIPH_MASK(ulPeripheral); + + // + // Delay for a little bit. + // + for(ulDelay = 0; ulDelay < 16; ulDelay++) + { + } + + // + // Take the peripheral out of the reset state. + // + HWREG(g_pulSRCRRegs[SYSCTL_PERIPH_INDEX(ulPeripheral)]) &= + ~SYSCTL_PERIPH_MASK(ulPeripheral); +} + +//***************************************************************************** +// +//! Enables a peripheral. +//! +//! \param ulPeripheral is the peripheral to enable. +//! +//! Peripherals are enabled with this function. At power-up, all peripherals +//! are disabled; they must be enabled in order to operate or respond to +//! register reads/writes. +//! +//! The \e ulPeripheral parameter must be only one of the following values: +//! \b SYSCTL_PERIPH_ADC0, \b SYSCTL_PERIPH_ADC1, \b SYSCTL_PERIPH_CAN0, +//! \b SYSCTL_PERIPH_CAN1, \b SYSCTL_PERIPH_CAN2, \b SYSCTL_PERIPH_COMP0, +//! \b SYSCTL_PERIPH_COMP1, \b SYSCTL_PERIPH_COMP2, \b SYSCTL_PERIPH_EPI0, +//! \b SYSCTL_PERIPH_ETH, \b SYSCTL_PERIPH_GPIOA, \b SYSCTL_PERIPH_GPIOB, +//! \b SYSCTL_PERIPH_GPIOC, \b SYSCTL_PERIPH_GPIOD, \b SYSCTL_PERIPH_GPIOE, +//! \b SYSCTL_PERIPH_GPIOF, \b SYSCTL_PERIPH_GPIOG, \b SYSCTL_PERIPH_GPIOH, +//! \b SYSCTL_PERIPH_GPIOJ, \b SYSCTL_PERIPH_HIBERNATE, \b SYSCTL_PERIPH_I2C0, +//! \b SYSCTL_PERIPH_I2C1, \b SYSCTL_PERIPH_I2S0, \b SYSCTL_PERIPH_PWM, +//! \b SYSCTL_PERIPH_QEI0, \b SYSCTL_PERIPH_QEI1, \b SYSCTL_PERIPH_SSI0, +//! \b SYSCTL_PERIPH_SSI1, \b SYSCTL_PERIPH_TIMER0, \b SYSCTL_PERIPH_TIMER1, +//! \b SYSCTL_PERIPH_TIMER2, \b SYSCTL_PERIPH_TIMER3, \b SYSCTL_PERIPH_TEMP, +//! \b SYSCTL_PERIPH_UART0, \b SYSCTL_PERIPH_UART1, \b SYSCTL_PERIPH_UART2, +//! \b SYSCTL_PERIPH_UDMA, \b SYSCTL_PERIPH_USB0, \b SYSCTL_PERIPH_WDOG0, or +//! \b SYSCTL_PERIPH_WDOG1. +//! +//! \note It takes five clock cycles after the write to enable a peripheral +//! before the the peripheral is actually enabled. During this time, attempts +//! to access the peripheral will result in a bus fault. Care should be taken +//! to ensure that the peripheral is not accessed during this brief time +//! period. +//! +//! \return None. +// +//***************************************************************************** +void +SysCtlPeripheralEnable(unsigned long ulPeripheral) +{ + // + // Check the arguments. + // + ASSERT(SysCtlPeripheralValid(ulPeripheral)); + + // + // Enable this peripheral. + // + HWREG(g_pulRCGCRegs[SYSCTL_PERIPH_INDEX(ulPeripheral)]) |= + SYSCTL_PERIPH_MASK(ulPeripheral); +} + +//***************************************************************************** +// +//! Disables a peripheral. +//! +//! \param ulPeripheral is the peripheral to disable. +//! +//! Peripherals are disabled with this function. Once disabled, they will not +//! operate or respond to register reads/writes. +//! +//! The \e ulPeripheral parameter must be only one of the following values: +//! \b SYSCTL_PERIPH_ADC0, \b SYSCTL_PERIPH_ADC1, \b SYSCTL_PERIPH_CAN0, +//! \b SYSCTL_PERIPH_CAN1, \b SYSCTL_PERIPH_CAN2, \b SYSCTL_PERIPH_COMP0, +//! \b SYSCTL_PERIPH_COMP1, \b SYSCTL_PERIPH_COMP2, \b SYSCTL_PERIPH_EPI0, +//! \b SYSCTL_PERIPH_ETH, \b SYSCTL_PERIPH_GPIOA, \b SYSCTL_PERIPH_GPIOB, +//! \b SYSCTL_PERIPH_GPIOC, \b SYSCTL_PERIPH_GPIOD, \b SYSCTL_PERIPH_GPIOE, +//! \b SYSCTL_PERIPH_GPIOF, \b SYSCTL_PERIPH_GPIOG, \b SYSCTL_PERIPH_GPIOH, +//! \b SYSCTL_PERIPH_GPIOJ, \b SYSCTL_PERIPH_HIBERNATE, \b SYSCTL_PERIPH_I2C0, +//! \b SYSCTL_PERIPH_I2C1, \b SYSCTL_PERIPH_I2S0, \b SYSCTL_PERIPH_PWM, +//! \b SYSCTL_PERIPH_QEI0, \b SYSCTL_PERIPH_QEI1, \b SYSCTL_PERIPH_SSI0, +//! \b SYSCTL_PERIPH_SSI1, \b SYSCTL_PERIPH_TIMER0, \b SYSCTL_PERIPH_TIMER1, +//! \b SYSCTL_PERIPH_TIMER2, \b SYSCTL_PERIPH_TIMER3, \b SYSCTL_PERIPH_TEMP, +//! \b SYSCTL_PERIPH_UART0, \b SYSCTL_PERIPH_UART1, \b SYSCTL_PERIPH_UART2, +//! \b SYSCTL_PERIPH_UDMA, \b SYSCTL_PERIPH_USB0, \b SYSCTL_PERIPH_WDOG0, or +//! \b SYSCTL_PERIPH_WDOG1. +//! +//! \return None. +// +//***************************************************************************** +void +SysCtlPeripheralDisable(unsigned long ulPeripheral) +{ + // + // Check the arguments. + // + ASSERT(SysCtlPeripheralValid(ulPeripheral)); + + // + // Disable this peripheral. + // + HWREG(g_pulRCGCRegs[SYSCTL_PERIPH_INDEX(ulPeripheral)]) &= + ~SYSCTL_PERIPH_MASK(ulPeripheral); +} + +//***************************************************************************** +// +//! Enables a peripheral in sleep mode. +//! +//! \param ulPeripheral is the peripheral to enable in sleep mode. +//! +//! This function allows a peripheral to continue operating when the processor +//! goes into sleep mode. Since the clocking configuration of the device does +//! not change, any peripheral can safely continue operating while the +//! processor is in sleep mode, and can therefore wake the processor from sleep +//! mode. +//! +//! Sleep mode clocking of peripherals must be enabled via +//! SysCtlPeripheralClockGating(); if disabled, the peripheral sleep mode +//! configuration is maintained but has no effect when sleep mode is entered. +//! +//! The \e ulPeripheral parameter must be only one of the following values: +//! \b SYSCTL_PERIPH_ADC0, \b SYSCTL_PERIPH_ADC1, \b SYSCTL_PERIPH_CAN0, +//! \b SYSCTL_PERIPH_CAN1, \b SYSCTL_PERIPH_CAN2, \b SYSCTL_PERIPH_COMP0, +//! \b SYSCTL_PERIPH_COMP1, \b SYSCTL_PERIPH_COMP2, \b SYSCTL_PERIPH_EPI0, +//! \b SYSCTL_PERIPH_ETH, \b SYSCTL_PERIPH_GPIOA, \b SYSCTL_PERIPH_GPIOB, +//! \b SYSCTL_PERIPH_GPIOC, \b SYSCTL_PERIPH_GPIOD, \b SYSCTL_PERIPH_GPIOE, +//! \b SYSCTL_PERIPH_GPIOF, \b SYSCTL_PERIPH_GPIOG, \b SYSCTL_PERIPH_GPIOH, +//! \b SYSCTL_PERIPH_GPIOJ, \b SYSCTL_PERIPH_HIBERNATE, \b SYSCTL_PERIPH_I2C0, +//! \b SYSCTL_PERIPH_I2C1, \b SYSCTL_PERIPH_I2S0, \b SYSCTL_PERIPH_PWM, +//! \b SYSCTL_PERIPH_QEI0, \b SYSCTL_PERIPH_QEI1, \b SYSCTL_PERIPH_SSI0, +//! \b SYSCTL_PERIPH_SSI1, \b SYSCTL_PERIPH_TIMER0, \b SYSCTL_PERIPH_TIMER1, +//! \b SYSCTL_PERIPH_TIMER2, \b SYSCTL_PERIPH_TIMER3, \b SYSCTL_PERIPH_TEMP, +//! \b SYSCTL_PERIPH_UART0, \b SYSCTL_PERIPH_UART1, \b SYSCTL_PERIPH_UART2, +//! \b SYSCTL_PERIPH_UDMA, \b SYSCTL_PERIPH_USB0, \b SYSCTL_PERIPH_WDOG0, or +//! \b SYSCTL_PERIPH_WDOG1. +//! +//! \return None. +// +//***************************************************************************** +void +SysCtlPeripheralSleepEnable(unsigned long ulPeripheral) +{ + // + // Check the arguments. + // + ASSERT(SysCtlPeripheralValid(ulPeripheral)); + + // + // Enable this peripheral in sleep mode. + // + HWREG(g_pulSCGCRegs[SYSCTL_PERIPH_INDEX(ulPeripheral)]) |= + SYSCTL_PERIPH_MASK(ulPeripheral); +} + +//***************************************************************************** +// +//! Disables a peripheral in sleep mode. +//! +//! \param ulPeripheral is the peripheral to disable in sleep mode. +//! +//! This function causes a peripheral to stop operating when the processor goes +//! into sleep mode. Disabling peripherals while in sleep mode helps to lower +//! the current draw of the device. If enabled (via SysCtlPeripheralEnable()), +//! the peripheral will automatically resume operation when the processor +//! leaves sleep mode, maintaining its entire state from before sleep mode was +//! entered. +//! +//! Sleep mode clocking of peripherals must be enabled via +//! SysCtlPeripheralClockGating(); if disabled, the peripheral sleep mode +//! configuration is maintained but has no effect when sleep mode is entered. +//! +//! The \e ulPeripheral parameter must be only one of the following values: +//! \b SYSCTL_PERIPH_ADC0, \b SYSCTL_PERIPH_ADC1, \b SYSCTL_PERIPH_CAN0, +//! \b SYSCTL_PERIPH_CAN1, \b SYSCTL_PERIPH_CAN2, \b SYSCTL_PERIPH_COMP0, +//! \b SYSCTL_PERIPH_COMP1, \b SYSCTL_PERIPH_COMP2, \b SYSCTL_PERIPH_EPI0, +//! \b SYSCTL_PERIPH_ETH, \b SYSCTL_PERIPH_GPIOA, \b SYSCTL_PERIPH_GPIOB, +//! \b SYSCTL_PERIPH_GPIOC, \b SYSCTL_PERIPH_GPIOD, \b SYSCTL_PERIPH_GPIOE, +//! \b SYSCTL_PERIPH_GPIOF, \b SYSCTL_PERIPH_GPIOG, \b SYSCTL_PERIPH_GPIOH, +//! \b SYSCTL_PERIPH_GPIOJ, \b SYSCTL_PERIPH_HIBERNATE, \b SYSCTL_PERIPH_I2C0, +//! \b SYSCTL_PERIPH_I2C1, \b SYSCTL_PERIPH_I2S0, \b SYSCTL_PERIPH_PWM, +//! \b SYSCTL_PERIPH_QEI0, \b SYSCTL_PERIPH_QEI1, \b SYSCTL_PERIPH_SSI0, +//! \b SYSCTL_PERIPH_SSI1, \b SYSCTL_PERIPH_TIMER0, \b SYSCTL_PERIPH_TIMER1, +//! \b SYSCTL_PERIPH_TIMER2, \b SYSCTL_PERIPH_TIMER3, \b SYSCTL_PERIPH_TEMP, +//! \b SYSCTL_PERIPH_UART0, \b SYSCTL_PERIPH_UART1, \b SYSCTL_PERIPH_UART2, +//! \b SYSCTL_PERIPH_UDMA, \b SYSCTL_PERIPH_USB0, \b SYSCTL_PERIPH_WDOG0, or +//! \b SYSCTL_PERIPH_WDOG1. +//! +//! \return None. +// +//***************************************************************************** +void +SysCtlPeripheralSleepDisable(unsigned long ulPeripheral) +{ + // + // Check the arguments. + // + ASSERT(SysCtlPeripheralValid(ulPeripheral)); + + // + // Disable this peripheral in sleep mode. + // + HWREG(g_pulSCGCRegs[SYSCTL_PERIPH_INDEX(ulPeripheral)]) &= + ~SYSCTL_PERIPH_MASK(ulPeripheral); +} + +//***************************************************************************** +// +//! Enables a peripheral in deep-sleep mode. +//! +//! \param ulPeripheral is the peripheral to enable in deep-sleep mode. +//! +//! This function allows a peripheral to continue operating when the processor +//! goes into deep-sleep mode. Since the clocking configuration of the device +//! may change, not all peripherals can safely continue operating while the +//! processor is in sleep mode. Those that must run at a particular frequency +//! (such as a UART) will not work as expected if the clock changes. It is the +//! responsibility of the caller to make sensible choices. +//! +//! Deep-sleep mode clocking of peripherals must be enabled via +//! SysCtlPeripheralClockGating(); if disabled, the peripheral deep-sleep mode +//! configuration is maintained but has no effect when deep-sleep mode is +//! entered. +//! +//! The \e ulPeripheral parameter must be only one of the following values: +//! \b SYSCTL_PERIPH_ADC0, \b SYSCTL_PERIPH_ADC1, \b SYSCTL_PERIPH_CAN0, +//! \b SYSCTL_PERIPH_CAN1, \b SYSCTL_PERIPH_CAN2, \b SYSCTL_PERIPH_COMP0, +//! \b SYSCTL_PERIPH_COMP1, \b SYSCTL_PERIPH_COMP2, \b SYSCTL_PERIPH_EPI0, +//! \b SYSCTL_PERIPH_ETH, \b SYSCTL_PERIPH_GPIOA, \b SYSCTL_PERIPH_GPIOB, +//! \b SYSCTL_PERIPH_GPIOC, \b SYSCTL_PERIPH_GPIOD, \b SYSCTL_PERIPH_GPIOE, +//! \b SYSCTL_PERIPH_GPIOF, \b SYSCTL_PERIPH_GPIOG, \b SYSCTL_PERIPH_GPIOH, +//! \b SYSCTL_PERIPH_GPIOJ, \b SYSCTL_PERIPH_HIBERNATE, \b SYSCTL_PERIPH_I2C0, +//! \b SYSCTL_PERIPH_I2C1, \b SYSCTL_PERIPH_I2S0, \b SYSCTL_PERIPH_PWM, +//! \b SYSCTL_PERIPH_QEI0, \b SYSCTL_PERIPH_QEI1, \b SYSCTL_PERIPH_SSI0, +//! \b SYSCTL_PERIPH_SSI1, \b SYSCTL_PERIPH_TIMER0, \b SYSCTL_PERIPH_TIMER1, +//! \b SYSCTL_PERIPH_TIMER2, \b SYSCTL_PERIPH_TIMER3, \b SYSCTL_PERIPH_TEMP, +//! \b SYSCTL_PERIPH_UART0, \b SYSCTL_PERIPH_UART1, \b SYSCTL_PERIPH_UART2, +//! \b SYSCTL_PERIPH_UDMA, \b SYSCTL_PERIPH_USB0, \b SYSCTL_PERIPH_WDOG0, or +//! \b SYSCTL_PERIPH_WDOG1. +//! +//! \return None. +// +//***************************************************************************** +void +SysCtlPeripheralDeepSleepEnable(unsigned long ulPeripheral) +{ + // + // Check the arguments. + // + ASSERT(SysCtlPeripheralValid(ulPeripheral)); + + // + // Enable this peripheral in deep-sleep mode. + // + HWREG(g_pulDCGCRegs[SYSCTL_PERIPH_INDEX(ulPeripheral)]) |= + SYSCTL_PERIPH_MASK(ulPeripheral); +} + +//***************************************************************************** +// +//! Disables a peripheral in deep-sleep mode. +//! +//! \param ulPeripheral is the peripheral to disable in deep-sleep mode. +//! +//! This function causes a peripheral to stop operating when the processor goes +//! into deep-sleep mode. Disabling peripherals while in deep-sleep mode helps +//! to lower the current draw of the device, and can keep peripherals that +//! require a particular clock frequency from operating when the clock changes +//! as a result of entering deep-sleep mode. If enabled (via +//! SysCtlPeripheralEnable()), the peripheral will automatically resume +//! operation when the processor leaves deep-sleep mode, maintaining its entire +//! state from before deep-sleep mode was entered. +//! +//! Deep-sleep mode clocking of peripherals must be enabled via +//! SysCtlPeripheralClockGating(); if disabled, the peripheral deep-sleep mode +//! configuration is maintained but has no effect when deep-sleep mode is +//! entered. +//! +//! The \e ulPeripheral parameter must be only one of the following values: +//! \b SYSCTL_PERIPH_ADC0, \b SYSCTL_PERIPH_ADC1, \b SYSCTL_PERIPH_CAN0, +//! \b SYSCTL_PERIPH_CAN1, \b SYSCTL_PERIPH_CAN2, \b SYSCTL_PERIPH_COMP0, +//! \b SYSCTL_PERIPH_COMP1, \b SYSCTL_PERIPH_COMP2, \b SYSCTL_PERIPH_EPI0, +//! \b SYSCTL_PERIPH_ETH, \b SYSCTL_PERIPH_GPIOA, \b SYSCTL_PERIPH_GPIOB, +//! \b SYSCTL_PERIPH_GPIOC, \b SYSCTL_PERIPH_GPIOD, \b SYSCTL_PERIPH_GPIOE, +//! \b SYSCTL_PERIPH_GPIOF, \b SYSCTL_PERIPH_GPIOG, \b SYSCTL_PERIPH_GPIOH, +//! \b SYSCTL_PERIPH_GPIOJ, \b SYSCTL_PERIPH_HIBERNATE, \b SYSCTL_PERIPH_I2C0, +//! \b SYSCTL_PERIPH_I2C1, \b SYSCTL_PERIPH_I2S0, \b SYSCTL_PERIPH_PWM, +//! \b SYSCTL_PERIPH_QEI0, \b SYSCTL_PERIPH_QEI1, \b SYSCTL_PERIPH_SSI0, +//! \b SYSCTL_PERIPH_SSI1, \b SYSCTL_PERIPH_TIMER0, \b SYSCTL_PERIPH_TIMER1, +//! \b SYSCTL_PERIPH_TIMER2, \b SYSCTL_PERIPH_TIMER3, \b SYSCTL_PERIPH_TEMP, +//! \b SYSCTL_PERIPH_UART0, \b SYSCTL_PERIPH_UART1, \b SYSCTL_PERIPH_UART2, +//! \b SYSCTL_PERIPH_UDMA, \b SYSCTL_PERIPH_USB0, \b SYSCTL_PERIPH_WDOG0, or +//! \b SYSCTL_PERIPH_WDOG1. +//! +//! \return None. +// +//***************************************************************************** +void +SysCtlPeripheralDeepSleepDisable(unsigned long ulPeripheral) +{ + // + // Check the arguments. + // + ASSERT(SysCtlPeripheralValid(ulPeripheral)); + + // + // Disable this peripheral in deep-sleep mode. + // + HWREG(g_pulDCGCRegs[SYSCTL_PERIPH_INDEX(ulPeripheral)]) &= + ~SYSCTL_PERIPH_MASK(ulPeripheral); +} + +//***************************************************************************** +// +//! Controls peripheral clock gating in sleep and deep-sleep mode. +//! +//! \param bEnable is a boolean that is \b true if the sleep and deep-sleep +//! peripheral configuration should be used and \b false if not. +//! +//! This function controls how peripherals are clocked when the processor goes +//! into sleep or deep-sleep mode. By default, the peripherals are clocked the +//! same as in run mode; if peripheral clock gating is enabled they are clocked +//! according to the configuration set by SysCtlPeripheralSleepEnable(), +//! SysCtlPeripheralSleepDisable(), SysCtlPeripheralDeepSleepEnable(), and +//! SysCtlPeripheralDeepSleepDisable(). +//! +//! \return None. +// +//***************************************************************************** +void +SysCtlPeripheralClockGating(tBoolean bEnable) +{ + // + // Enable peripheral clock gating as requested. + // + if(bEnable) + { + HWREG(SYSCTL_RCC) |= SYSCTL_RCC_ACG; + } + else + { + HWREG(SYSCTL_RCC) &= ~(SYSCTL_RCC_ACG); + } +} + +//***************************************************************************** +// +//! Registers an interrupt handler for the system control interrupt. +//! +//! \param pfnHandler is a pointer to the function to be called when the system +//! control interrupt occurs. +//! +//! This sets the handler to be called when a system control interrupt occurs. +//! This will enable the global interrupt in the interrupt controller; specific +//! system control interrupts must be enabled via SysCtlIntEnable(). It is the +//! interrupt handler's responsibility to clear the interrupt source via +//! SysCtlIntClear(). +//! +//! System control can generate interrupts when the PLL achieves lock, if the +//! internal LDO current limit is exceeded, if the internal oscillator fails, +//! if the main oscillator fails, if the internal LDO output voltage droops too +//! much, if the external voltage droops too much, or if the PLL fails. +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +SysCtlIntRegister(void (*pfnHandler)(void)) +{ + // + // Register the interrupt handler, returning an error if an error occurs. + // + IntRegister(INT_SYSCTL, pfnHandler); + + // + // Enable the system control interrupt. + // + IntEnable(INT_SYSCTL); +} + +//***************************************************************************** +// +//! Unregisters the interrupt handler for the system control interrupt. +//! +//! This function will clear the handler to be called when a system control +//! interrupt occurs. This will also mask off the interrupt in the interrupt +//! controller so that the interrupt handler no longer is called. +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +SysCtlIntUnregister(void) +{ + // + // Disable the interrupt. + // + IntDisable(INT_SYSCTL); + + // + // Unregister the interrupt handler. + // + IntUnregister(INT_SYSCTL); +} + +//***************************************************************************** +// +//! Enables individual system control interrupt sources. +//! +//! \param ulInts is a bit mask of the interrupt sources to be enabled. Must +//! be a logical OR of \b SYSCTL_INT_PLL_LOCK, \b SYSCTL_INT_CUR_LIMIT, +//! \b SYSCTL_INT_IOSC_FAIL, \b SYSCTL_INT_MOSC_FAIL, \b SYSCTL_INT_POR, +//! \b SYSCTL_INT_BOR, and/or \b SYSCTL_INT_PLL_FAIL. +//! +//! Enables the indicated system control interrupt sources. Only the sources +//! that are enabled can be reflected to the processor interrupt; disabled +//! sources have no effect on the processor. +//! +//! \return None. +// +//***************************************************************************** +void +SysCtlIntEnable(unsigned long ulInts) +{ + // + // Enable the specified interrupts. + // + HWREG(SYSCTL_IMC) |= ulInts; +} + +//***************************************************************************** +// +//! Disables individual system control interrupt sources. +//! +//! \param ulInts is a bit mask of the interrupt sources to be disabled. Must +//! be a logical OR of \b SYSCTL_INT_PLL_LOCK, \b SYSCTL_INT_CUR_LIMIT, +//! \b SYSCTL_INT_IOSC_FAIL, \b SYSCTL_INT_MOSC_FAIL, \b SYSCTL_INT_POR, +//! \b SYSCTL_INT_BOR, and/or \b SYSCTL_INT_PLL_FAIL. +//! +//! Disables the indicated system control interrupt sources. Only the sources +//! that are enabled can be reflected to the processor interrupt; disabled +//! sources have no effect on the processor. +//! +//! \return None. +// +//***************************************************************************** +void +SysCtlIntDisable(unsigned long ulInts) +{ + // + // Disable the specified interrupts. + // + HWREG(SYSCTL_IMC) &= ~(ulInts); +} + +//***************************************************************************** +// +//! Clears system control interrupt sources. +//! +//! \param ulInts is a bit mask of the interrupt sources to be cleared. Must +//! be a logical OR of \b SYSCTL_INT_PLL_LOCK, \b SYSCTL_INT_CUR_LIMIT, +//! \b SYSCTL_INT_IOSC_FAIL, \b SYSCTL_INT_MOSC_FAIL, \b SYSCTL_INT_POR, +//! \b SYSCTL_INT_BOR, and/or \b SYSCTL_INT_PLL_FAIL. +//! +//! The specified system control interrupt sources are cleared, so that they no +//! longer assert. This must be done in the interrupt handler to keep it from +//! being called again immediately upon exit. +//! +//! \note Since there is a write buffer in the Cortex-M3 processor, it may take +//! several clock cycles before the interrupt source is actually cleared. +//! Therefore, it is recommended that the interrupt source be cleared early in +//! the interrupt handler (as opposed to the very last action) to avoid +//! returning from the interrupt handler before the interrupt source is +//! actually cleared. Failure to do so may result in the interrupt handler +//! being immediately reentered (since NVIC still sees the interrupt source +//! asserted). +//! +//! \return None. +// +//***************************************************************************** +void +SysCtlIntClear(unsigned long ulInts) +{ + // + // Clear the requested interrupt sources. + // + HWREG(SYSCTL_MISC) = ulInts; +} + +//***************************************************************************** +// +//! Gets the current interrupt status. +//! +//! \param bMasked is false if the raw interrupt status is required and true if +//! the masked interrupt status is required. +//! +//! This returns the interrupt status for the system controller. Either the +//! raw interrupt status or the status of interrupts that are allowed to +//! reflect to the processor can be returned. +//! +//! \return The current interrupt status, enumerated as a bit field of +//! \b SYSCTL_INT_PLL_LOCK, \b SYSCTL_INT_CUR_LIMIT, \b SYSCTL_INT_IOSC_FAIL, +//! \b SYSCTL_INT_MOSC_FAIL, \b SYSCTL_INT_POR, \b SYSCTL_INT_BOR, and +//! \b SYSCTL_INT_PLL_FAIL. +// +//***************************************************************************** +unsigned long +SysCtlIntStatus(tBoolean bMasked) +{ + // + // Return either the interrupt status or the raw interrupt status as + // requested. + // + if(bMasked) + { + return(HWREG(SYSCTL_MISC)); + } + else + { + return(HWREG(SYSCTL_RIS)); + } +} + +//***************************************************************************** +// +//! Sets the output voltage of the LDO. +//! +//! \param ulVoltage is the required output voltage from the LDO. Must be one +//! of \b SYSCTL_LDO_2_25V, \b SYSCTL_LDO_2_30V, \b SYSCTL_LDO_2_35V, +//! \b SYSCTL_LDO_2_40V, \b SYSCTL_LDO_2_45V, \b SYSCTL_LDO_2_50V, +//! \b SYSCTL_LDO_2_55V, \b SYSCTL_LDO_2_60V, \b SYSCTL_LDO_2_65V, +//! \b SYSCTL_LDO_2_70V, or \b SYSCTL_LDO_2_75V. +//! +//! This function sets the output voltage of the LDO. The default voltage is +//! 2.5 V; it can be adjusted +/- 10%. +//! +//! \return None. +// +//***************************************************************************** +void +SysCtlLDOSet(unsigned long ulVoltage) +{ + // + // Check the arguments. + // + ASSERT((ulVoltage == SYSCTL_LDO_2_25V) || + (ulVoltage == SYSCTL_LDO_2_30V) || + (ulVoltage == SYSCTL_LDO_2_35V) || + (ulVoltage == SYSCTL_LDO_2_40V) || + (ulVoltage == SYSCTL_LDO_2_45V) || + (ulVoltage == SYSCTL_LDO_2_50V) || + (ulVoltage == SYSCTL_LDO_2_55V) || + (ulVoltage == SYSCTL_LDO_2_60V) || + (ulVoltage == SYSCTL_LDO_2_65V) || + (ulVoltage == SYSCTL_LDO_2_70V) || + (ulVoltage == SYSCTL_LDO_2_75V)); + + // + // Set the LDO voltage to the requested value. + // + HWREG(SYSCTL_LDOPCTL) = ulVoltage; +} + +//***************************************************************************** +// +//! Gets the output voltage of the LDO. +//! +//! This function determines the output voltage of the LDO, as specified by the +//! control register. +//! +//! \return Returns the current voltage of the LDO; will be one of +//! \b SYSCTL_LDO_2_25V, \b SYSCTL_LDO_2_30V, \b SYSCTL_LDO_2_35V, +//! \b SYSCTL_LDO_2_40V, \b SYSCTL_LDO_2_45V, \b SYSCTL_LDO_2_50V, +//! \b SYSCTL_LDO_2_55V, \b SYSCTL_LDO_2_60V, \b SYSCTL_LDO_2_65V, +//! \b SYSCTL_LDO_2_70V, or \b SYSCTL_LDO_2_75V. +// +//***************************************************************************** +unsigned long +SysCtlLDOGet(void) +{ + // + // Return the LDO voltage setting. + // + return(HWREG(SYSCTL_LDOPCTL)); +} + +//***************************************************************************** +// +//! Configures the LDO failure control. +//! +//! \param ulConfig is the required LDO failure control setting; can be either +//! \b SYSCTL_LDOCFG_ARST or \b SYSCTL_LDOCFG_NORST. +//! +//! This function allows the LDO to be configured to cause a processor reset +//! when the output voltage becomes unregulated. +//! +//! The LDO failure control is only available on Sandstorm-class devices. +//! +//! \return None. +// +//***************************************************************************** +void +SysCtlLDOConfigSet(unsigned long ulConfig) +{ + // + // Check the arguments. + // + ASSERT((ulConfig == SYSCTL_LDOCFG_ARST) || + (ulConfig == SYSCTL_LDOCFG_NORST)); + + // + // Set the reset control as requested. + // + HWREG(SYSCTL_LDOARST) = ulConfig; +} + +//***************************************************************************** +// +//! Resets the device. +//! +//! This function will perform a software reset of the entire device. The +//! processor and all peripherals will be reset and all device registers will +//! return to their default values (with the exception of the reset cause +//! register, which will maintain its current value but have the software reset +//! bit set as well). +//! +//! \return This function does not return. +// +//***************************************************************************** +void +SysCtlReset(void) +{ + // + // Perform a software reset request. This will cause the device to reset, + // no further code will be executed. + // + HWREG(NVIC_APINT) = NVIC_APINT_VECTKEY | NVIC_APINT_SYSRESETREQ; + + // + // The device should have reset, so this should never be reached. Just in + // case, loop forever. + // + while(1) + { + } +} + +//***************************************************************************** +// +//! Puts the processor into sleep mode. +//! +//! This function places the processor into sleep mode; it will not return +//! until the processor returns to run mode. The peripherals that are enabled +//! via SysCtlPeripheralSleepEnable() continue to operate and can wake up the +//! processor (if automatic clock gating is enabled with +//! SysCtlPeripheralClockGating(), otherwise all peripherals continue to +//! operate). +//! +//! \return None. +// +//***************************************************************************** +void +SysCtlSleep(void) +{ + // + // Wait for an interrupt. + // + CPUwfi(); +} + +//***************************************************************************** +// +//! Puts the processor into deep-sleep mode. +//! +//! This function places the processor into deep-sleep mode; it will not return +//! until the processor returns to run mode. The peripherals that are enabled +//! via SysCtlPeripheralDeepSleepEnable() continue to operate and can wake up +//! the processor (if automatic clock gating is enabled with +//! SysCtlPeripheralClockGating(), otherwise all peripherals continue to +//! operate). +//! +//! \return None. +// +//***************************************************************************** +void +SysCtlDeepSleep(void) +{ + // + // Enable deep-sleep. + // + HWREG(NVIC_SYS_CTRL) |= NVIC_SYS_CTRL_SLEEPDEEP; + + // + // Wait for an interrupt. + // + CPUwfi(); + + // + // Disable deep-sleep so that a future sleep will work correctly. + // + HWREG(NVIC_SYS_CTRL) &= ~(NVIC_SYS_CTRL_SLEEPDEEP); +} + +//***************************************************************************** +// +//! Gets the reason for a reset. +//! +//! This function will return the reason(s) for a reset. Since the reset +//! reasons are sticky until either cleared by software or an external reset, +//! multiple reset reasons may be returned if multiple resets have occurred. +//! The reset reason will be a logical OR of \b SYSCTL_CAUSE_LDO, +//! \b SYSCTL_CAUSE_SW, \b SYSCTL_CAUSE_WDOG, \b SYSCTL_CAUSE_BOR, +//! \b SYSCTL_CAUSE_POR, and/or \b SYSCTL_CAUSE_EXT. +//! +//! \return Returns the reason(s) for a reset. +// +//***************************************************************************** +unsigned long +SysCtlResetCauseGet(void) +{ + // + // Return the reset reasons. + // + return(HWREG(SYSCTL_RESC)); +} + +//***************************************************************************** +// +//! Clears reset reasons. +//! +//! \param ulCauses are the reset causes to be cleared; must be a logical OR of +//! \b SYSCTL_CAUSE_LDO, \b SYSCTL_CAUSE_SW, \b SYSCTL_CAUSE_WDOG, +//! \b SYSCTL_CAUSE_BOR, \b SYSCTL_CAUSE_POR, and/or \b SYSCTL_CAUSE_EXT. +//! +//! This function clears the specified sticky reset reasons. Once cleared, +//! another reset for the same reason can be detected, and a reset for a +//! different reason can be distinguished (instead of having two reset causes +//! set). If the reset reason is used by an application, all reset causes +//! should be cleared after they are retrieved with SysCtlResetCauseGet(). +//! +//! \return None. +// +//***************************************************************************** +void +SysCtlResetCauseClear(unsigned long ulCauses) +{ + // + // Clear the given reset reasons. + // + HWREG(SYSCTL_RESC) &= ~(ulCauses); +} + +//***************************************************************************** +// +//! Configures the brown-out control. +//! +//! \param ulConfig is the desired configuration of the brown-out control. +//! Must be the logical OR of \b SYSCTL_BOR_RESET and/or +//! \b SYSCTL_BOR_RESAMPLE. +//! \param ulDelay is the number of internal oscillator cycles to wait before +//! resampling an asserted brown-out signal. This value only has meaning when +//! \b SYSCTL_BOR_RESAMPLE is set and must be less than 8192. +//! +//! This function configures how the brown-out control operates. It can detect +//! a brown-out by looking at only the brown-out output, or it can wait for it +//! to be active for two consecutive samples separated by a configurable time. +//! When it detects a brown-out condition, it can either reset the device or +//! generate a processor interrupt. +//! +//! \return None. +// +//***************************************************************************** +void +SysCtlBrownOutConfigSet(unsigned long ulConfig, unsigned long ulDelay) +{ + // + // Check the arguments. + // + ASSERT(!(ulConfig & ~(SYSCTL_BOR_RESET | SYSCTL_BOR_RESAMPLE))); + ASSERT(ulDelay < 8192); + + // + // Configure the brown-out reset control. + // + HWREG(SYSCTL_PBORCTL) = (ulDelay << SYSCTL_PBORCTL_BORTIM_S) | ulConfig; +} + +//***************************************************************************** +// +//! Provides a small delay. +//! +//! \param ulCount is the number of delay loop iterations to perform. +//! +//! This function provides a means of generating a constant length delay. It +//! is written in assembly to keep the delay consistent across tool chains, +//! avoiding the need to tune the delay based on the tool chain in use. +//! +//! The loop takes 3 cycles/loop. +//! +//! \return None. +// +//***************************************************************************** +#if defined(ewarm) || defined(DOXYGEN) +void +SysCtlDelay(unsigned long ulCount) +{ + __asm(" subs r0, #1\n" + " bne.n SysCtlDelay\n" + " bx lr"); +} +#endif +#if defined(codered) || defined(gcc) || defined(sourcerygxx) +void __attribute__((naked)) +SysCtlDelay(unsigned long ulCount) +{ + __asm(" subs r0, #1\n" + " bne SysCtlDelay\n" + " bx lr"); +} +#endif +#if defined(rvmdk) || defined(__ARMCC_VERSION) +__asm void +SysCtlDelay(unsigned long ulCount) +{ + subs r0, #1; + bne SysCtlDelay; + bx lr; +} +#endif +#if defined(ccs) +volatile unsigned long g_ulInlineCCSWorkaround; +void +SysCtlDelay(unsigned long ulCount) +{ + __asm("delay?: subs r0, #1\n" + " bne.n delay?\n" + " bx lr\n"); + + // + // This is needed to keep TI compiler from optimizing away this code. + // + g_ulInlineCCSWorkaround += ulCount; +} +#endif + +//***************************************************************************** +// +//! Sets the clocking of the device. +//! +//! \param ulConfig is the required configuration of the device clocking. +//! +//! This function configures the clocking of the device. The input crystal +//! frequency, oscillator to be used, use of the PLL, and the system clock +//! divider are all configured with this function. +//! +//! The \e ulConfig parameter is the logical OR of several different values, +//! many of which are grouped into sets where only one can be chosen. +//! +//! The system clock divider is chosen with one of the following values: +//! \b SYSCTL_SYSDIV_1, \b SYSCTL_SYSDIV_2, \b SYSCTL_SYSDIV_3, ... +//! \b SYSCTL_SYSDIV_64. Only \b SYSCTL_SYSDIV_1 through \b SYSCTL_SYSDIV_16 +//! are valid on Sandstorm-class devices. +//! +//! The use of the PLL is chosen with either \b SYSCTL_USE_PLL or +//! \b SYSCTL_USE_OSC. +//! +//! The external crystal frequency is chosen with one of the following values: +//! \b SYSCTL_XTAL_1MHZ, \b SYSCTL_XTAL_1_84MHZ, \b SYSCTL_XTAL_2MHZ, +//! \b SYSCTL_XTAL_2_45MHZ, \b SYSCTL_XTAL_3_57MHZ, \b SYSCTL_XTAL_3_68MHZ, +//! \b SYSCTL_XTAL_4MHZ, \b SYSCTL_XTAL_4_09MHZ, \b SYSCTL_XTAL_4_91MHZ, +//! \b SYSCTL_XTAL_5MHZ, \b SYSCTL_XTAL_5_12MHZ, \b SYSCTL_XTAL_6MHZ, +//! \b SYSCTL_XTAL_6_14MHZ, \b SYSCTL_XTAL_7_37MHZ, \b SYSCTL_XTAL_8MHZ, +//! \b SYSCTL_XTAL_8_19MHZ, \b SYSCTL_XTAL_10MHZ, \b SYSCTL_XTAL_12MHZ, +//! \b SYSCTL_XTAL_12_2MHZ, \b SYSCTL_XTAL_13_5MHZ, \b SYSCTL_XTAL_14_3MHZ, +//! \b SYSCTL_XTAL_16MHZ, or \b SYSCTL_XTAL_16_3MHZ. Values below +//! \b SYSCTL_XTAL_3_57MHZ are not valid when the PLL is in operation. On +//! Sandstorm- and Fury-class devices, values above \b SYSCTL_XTAL_8_19MHZ are +//! not valid. +//! +//! The oscillator source is chosen with one of the following values: +//! \b SYSCTL_OSC_MAIN, \b SYSCTL_OSC_INT, \b SYSCTL_OSC_INT4, +//! \b SYSCTL_OSC_INT30, or \b SYSCTL_OSC_EXT32. On Sandstorm-class devices, +//! \b SYSCTL_OSC_INT30 and \b SYSCTL_OSC_EXT32 are not valid. +//! \b SYSCTL_OSC_EXT32 is only available on devices with the hibernate module, +//! and then only when the hibernate module has been enabled. +//! +//! The internal and main oscillators are disabled with the +//! \b SYSCTL_INT_OSC_DIS and \b SYSCTL_MAIN_OSC_DIS flags, respectively. +//! The external oscillator must be enabled in order to use an external clock +//! source. Note that attempts to disable the oscillator used to clock the +//! device will be prevented by the hardware. +//! +//! To clock the system from an external source (such as an external crystal +//! oscillator), use \b SYSCTL_USE_OSC \b | \b SYSCTL_OSC_MAIN. To clock the +//! system from the main oscillator, use \b SYSCTL_USE_OSC \b | +//! \b SYSCTL_OSC_MAIN. To clock the system from the PLL, use +//! \b SYSCTL_USE_PLL \b | \b SYSCTL_OSC_MAIN, and select the appropriate +//! crystal with one of the \b SYSCTL_XTAL_xxx values. +//! +//! \note If selecting the PLL as the system clock source (that is, via +//! \b SYSCTL_USE_PLL), this function will poll the PLL lock interrupt to +//! determine when the PLL has locked. If an interrupt handler for the +//! system control interrupt is in place, and it responds to and clears the +//! PLL lock interrupt, this function will delay until its timeout has occurred +//! instead of completing as soon as PLL lock is achieved. +//! +//! \return None. +// +//***************************************************************************** +void +SysCtlClockSet(unsigned long ulConfig) +{ + unsigned long ulDelay, ulRCC, ulRCC2; + + // + // See if this is a Sandstorm-class device and clocking features from newer + // devices were requested. + // + if(CLASS_IS_SANDSTORM && (ulConfig & SYSCTL_RCC2_USERCC2)) + { + // + // Return without changing the clocking since the requested + // configuration can not be achieved. + // + return; + } + + // + // Get the current value of the RCC and RCC2 registers. If using a + // Sandstorm-class device, the RCC2 register will read back as zero and the + // writes to it from within this function will be ignored. + // + ulRCC = HWREG(SYSCTL_RCC); + ulRCC2 = HWREG(SYSCTL_RCC2); + + // + // Bypass the PLL and system clock dividers for now. + // + ulRCC |= SYSCTL_RCC_BYPASS; + ulRCC &= ~(SYSCTL_RCC_USESYSDIV); + ulRCC2 |= SYSCTL_RCC2_BYPASS2; + + // + // Write the new RCC value. + // + HWREG(SYSCTL_RCC) = ulRCC; + HWREG(SYSCTL_RCC2) = ulRCC2; + + // + // See if either oscillator needs to be enabled. + // + if(((ulRCC & SYSCTL_RCC_IOSCDIS) && !(ulConfig & SYSCTL_RCC_IOSCDIS)) || + ((ulRCC & SYSCTL_RCC_MOSCDIS) && !(ulConfig & SYSCTL_RCC_MOSCDIS))) + { + // + // Make sure that the required oscillators are enabled. For now, the + // previously enabled oscillators must be enabled along with the newly + // requested oscillators. + // + ulRCC &= (~(SYSCTL_RCC_IOSCDIS | SYSCTL_RCC_MOSCDIS) | + (ulConfig & (SYSCTL_RCC_IOSCDIS | SYSCTL_RCC_MOSCDIS))); + + // + // Write the new RCC value. + // + HWREG(SYSCTL_RCC) = ulRCC; + + // + // Wait for a bit, giving the oscillator time to stabilize. The number + // of iterations is adjusted based on the current clock source; a + // smaller number of iterations is required for slower clock rates. + // + if(((ulRCC2 & SYSCTL_RCC2_USERCC2) && + (((ulRCC2 & SYSCTL_RCC2_OSCSRC2_M) == SYSCTL_RCC2_OSCSRC2_30) || + ((ulRCC2 & SYSCTL_RCC2_OSCSRC2_M) == SYSCTL_RCC2_OSCSRC2_32))) || + (!(ulRCC2 & SYSCTL_RCC2_USERCC2) && + ((ulRCC & SYSCTL_RCC_OSCSRC_M) == SYSCTL_RCC_OSCSRC_30))) + { + // + // Delay for 4096 iterations. + // + SysCtlDelay(4096); + } + else + { + // + // Delay for 524,288 iterations. + // + SysCtlDelay(524288); + } + } + + // + // Set the new crystal value, oscillator source, and PLL configuration. + // Since the OSCSRC2 field in RCC2 overlaps the XTAL field in RCC, the + // OSCSRC field has a special encoding within ulConfig to avoid the + // overlap. + // + ulRCC &= ~(SYSCTL_RCC_XTAL_M | SYSCTL_RCC_OSCSRC_M | + SYSCTL_RCC_PWRDN | SYSCTL_RCC_OEN); + ulRCC |= ulConfig & (SYSCTL_RCC_XTAL_M | SYSCTL_RCC_OSCSRC_M | + SYSCTL_RCC_PWRDN | SYSCTL_RCC_OEN); + ulRCC2 &= ~(SYSCTL_RCC2_USERCC2 | SYSCTL_RCC2_OSCSRC2_M | + SYSCTL_RCC2_PWRDN2); + ulRCC2 |= ulConfig & (SYSCTL_RCC2_USERCC2 | SYSCTL_RCC_OSCSRC_M | + SYSCTL_RCC2_PWRDN2); + ulRCC2 |= (ulConfig & 0x00000008) << 3; + + // + // Clear the PLL lock interrupt. + // + HWREG(SYSCTL_MISC) = SYSCTL_INT_PLL_LOCK; + + // + // Write the new RCC value. + // + if(ulRCC2 & SYSCTL_RCC2_USERCC2) + { + HWREG(SYSCTL_RCC2) = ulRCC2; + HWREG(SYSCTL_RCC) = ulRCC; + } + else + { + HWREG(SYSCTL_RCC) = ulRCC; + HWREG(SYSCTL_RCC2) = ulRCC2; + } + + // + // Wait for a bit so that new crystal value and oscillator source can take + // effect. + // + SysCtlDelay(16); + + // + // Set the requested system divider and disable the appropriate + // oscillators. This will not get written immediately. + // + ulRCC &= ~(SYSCTL_RCC_SYSDIV_M | SYSCTL_RCC_USESYSDIV | + SYSCTL_RCC_IOSCDIS | SYSCTL_RCC_MOSCDIS); + ulRCC |= ulConfig & (SYSCTL_RCC_SYSDIV_M | SYSCTL_RCC_USESYSDIV | + SYSCTL_RCC_IOSCDIS | SYSCTL_RCC_MOSCDIS); + ulRCC2 &= ~(SYSCTL_RCC2_SYSDIV2_M); + ulRCC2 |= ulConfig & SYSCTL_RCC2_SYSDIV2_M; + if(ulConfig & SYSCTL_RCC2_DIV400) + { + ulRCC |= SYSCTL_RCC_USESYSDIV; + ulRCC2 &= ~(SYSCTL_RCC_USESYSDIV); + ulRCC2 |= ulConfig & (SYSCTL_RCC2_DIV400 | SYSCTL_RCC2_SYSDIV2LSB); + } + else + { + ulRCC2 &= ~(SYSCTL_RCC2_DIV400); + } + + // + // See if the PLL output is being used to clock the system. + // + if(!(ulConfig & SYSCTL_RCC_BYPASS)) + { + // + // Wait until the PLL has locked. + // + for(ulDelay = 32768; ulDelay > 0; ulDelay--) + { + if(HWREG(SYSCTL_RIS) & SYSCTL_INT_PLL_LOCK) + { + break; + } + } + + // + // Enable use of the PLL. + // + ulRCC &= ~(SYSCTL_RCC_BYPASS); + ulRCC2 &= ~(SYSCTL_RCC2_BYPASS2); + } + + // + // Write the final RCC value. + // + HWREG(SYSCTL_RCC) = ulRCC; + HWREG(SYSCTL_RCC2) = ulRCC2; + + // + // Delay for a little bit so that the system divider takes effect. + // + SysCtlDelay(16); +} + +//***************************************************************************** +// +//! Gets the processor clock rate. +//! +//! This function determines the clock rate of the processor clock. This is +//! also the clock rate of all the peripheral modules (with the exception of +//! PWM, which has its own clock divider). +//! +//! \note This will not return accurate results if SysCtlClockSet() has not +//! been called to configure the clocking of the device, or if the device is +//! directly clocked from a crystal (or a clock source) that is not one of the +//! supported crystal frequencies. In the later case, this function should be +//! modified to directly return the correct system clock rate. +//! +//! \return The processor clock rate. +// +//***************************************************************************** +unsigned long +SysCtlClockGet(void) +{ + unsigned long ulRCC, ulRCC2, ulPLL, ulClk; + + // + // Read RCC and RCC2. For Sandstorm-class devices (which do not have + // RCC2), the RCC2 read will return 0, which indicates that RCC2 is + // disabled (since the SYSCTL_RCC2_USERCC2 bit is clear). + // + ulRCC = HWREG(SYSCTL_RCC); + ulRCC2 = HWREG(SYSCTL_RCC2); + + // + // Get the base clock rate. + // + switch((ulRCC2 & SYSCTL_RCC2_USERCC2) ? + (ulRCC2 & SYSCTL_RCC2_OSCSRC2_M) : + (ulRCC & SYSCTL_RCC_OSCSRC_M)) + { + // + // The main oscillator is the clock source. Determine its rate from + // the crystal setting field. + // + case SYSCTL_RCC_OSCSRC_MAIN: + { + ulClk = g_pulXtals[(ulRCC & SYSCTL_RCC_XTAL_M) >> + SYSCTL_RCC_XTAL_S]; + break; + } + + // + // The internal oscillator is the source clock. + // + case SYSCTL_RCC_OSCSRC_INT: + { + // + // See if this is a Sandstorm-class or Fury-class device. + // + if(CLASS_IS_SANDSTORM) + { + // + // The internal oscillator on a Sandstorm-class device is + // 15 MHz +/- 50%. + // + ulClk = 15000000; + } + else if((CLASS_IS_FURY && REVISION_IS_A2) || + (CLASS_IS_DUSTDEVIL && REVISION_IS_A0)) + { + // + // The internal oscillator on a rev A2 Fury-class device and a + // rev A0 Dustdevil-class device is 12 MHz +/- 30%. + // + ulClk = 12000000; + } + else + { + // + // The internal oscillator on all other devices is 16 MHz. + // + ulClk = 16000000; + } + break; + } + + // + // The internal oscillator divided by four is the source clock. + // + case SYSCTL_RCC_OSCSRC_INT4: + { + // + // See if this is a Sandstorm-class or Fury-class device. + // + if(CLASS_IS_SANDSTORM) + { + // + // The internal oscillator on a Sandstorm-class device is + // 15 MHz +/- 50%. + // + ulClk = 15000000 / 4; + } + else if((CLASS_IS_FURY && REVISION_IS_A2) || + (CLASS_IS_DUSTDEVIL && REVISION_IS_A0)) + { + // + // The internal oscillator on a rev A2 Fury-class device and a + // rev A0 Dustdevil-class device is 12 MHz +/- 30%. + // + ulClk = 12000000 / 4; + } + else + { + // + // The internal oscillator on a Tempest-class device is 16 MHz. + // + ulClk = 16000000 / 4; + } + break; + } + + // + // The internal 30 KHz oscillator is the source clock. + // + case SYSCTL_RCC_OSCSRC_30: + { + // + // The internal 30 KHz oscillator has an accuracy of +/- 30%. + // + ulClk = 30000; + break; + } + + // + // The 4.19 MHz clock from the hibernate module is the clock source. + // + case SYSCTL_RCC2_OSCSRC2_419: + { + ulClk = 4194304; + break; + } + + // + // The 32 KHz clock from the hibernate module is the source clock. + // + case SYSCTL_RCC2_OSCSRC2_32: + { + ulClk = 32768; + break; + } + + // + // An unknown setting, so return a zero clock (that is, an unknown + // clock rate). + // + default: + { + return(0); + } + } + + // + // See if the PLL is being used. + // + if(((ulRCC2 & SYSCTL_RCC2_USERCC2) && !(ulRCC2 & SYSCTL_RCC2_BYPASS2)) || + (!(ulRCC2 & SYSCTL_RCC2_USERCC2) && !(ulRCC & SYSCTL_RCC_BYPASS))) + { + // + // Get the PLL configuration. + // + ulPLL = HWREG(SYSCTL_PLLCFG); + + // + // See if this is a Sandstorm-class or Fury-class device. + // + if(CLASS_IS_SANDSTORM) + { + // + // Compute the PLL output frequency based on its input frequency. + // The formula for a Sandstorm-class devices is + // "(xtal * (f + 2)) / (r + 2)". + // + ulClk = ((ulClk * (((ulPLL & SYSCTL_PLLCFG_F_M) >> + SYSCTL_PLLCFG_F_S) + 2)) / + (((ulPLL & SYSCTL_PLLCFG_R_M) >> + SYSCTL_PLLCFG_R_S) + 2)); + } + else + { + // + // Compute the PLL output frequency based on its input frequency. + // The formula for a Fury-class device is + // "(xtal * f) / ((r + 1) * 2)". + // + ulClk = ((ulClk * ((ulPLL & SYSCTL_PLLCFG_F_M) >> + SYSCTL_PLLCFG_F_S)) / + ((((ulPLL & SYSCTL_PLLCFG_R_M) >> + SYSCTL_PLLCFG_R_S) + 1) * 2)); + } + + // + // See if the optional output divide by 2 is being used. + // + if(ulPLL & SYSCTL_PLLCFG_OD_2) + { + ulClk /= 2; + } + + // + // See if the optional output divide by 4 is being used. + // + if(ulPLL & SYSCTL_PLLCFG_OD_4) + { + ulClk /= 4; + } + + // + // Force the system divider to be enabled. It is always used when + // using the PLL, but in some cases it will not read as being enabled. + // + ulRCC |= SYSCTL_RCC_USESYSDIV; + } + + // + // See if the system divider is being used. + // + if(ulRCC & SYSCTL_RCC_USESYSDIV) + { + // + // Adjust the clock rate by the system clock divider. + // + if(ulRCC2 & SYSCTL_RCC2_USERCC2) + { + if((ulRCC2 & SYSCTL_RCC2_DIV400) && + (((ulRCC2 & SYSCTL_RCC2_USERCC2) && + !(ulRCC2 & SYSCTL_RCC2_BYPASS2)) || + (!(ulRCC2 & SYSCTL_RCC2_USERCC2) && + !(ulRCC & SYSCTL_RCC_BYPASS)))) + + { + ulClk = ((ulClk * 2) / (((ulRCC2 & (SYSCTL_RCC2_SYSDIV2_M | + SYSCTL_RCC2_SYSDIV2LSB)) >> + (SYSCTL_RCC2_SYSDIV2_S - 1)) + 1)); + } + else + { + ulClk /= (((ulRCC2 & SYSCTL_RCC2_SYSDIV2_M) >> + SYSCTL_RCC2_SYSDIV2_S) + 1); + } + } + else + { + ulClk /= (((ulRCC & SYSCTL_RCC_SYSDIV_M) >> SYSCTL_RCC_SYSDIV_S) + + 1); + } + } + + // + // Return the computed clock rate. + // + return(ulClk); +} + +//***************************************************************************** +// +//! Sets the PWM clock configuration. +//! +//! \param ulConfig is the configuration for the PWM clock; it must be one of +//! \b SYSCTL_PWMDIV_1, \b SYSCTL_PWMDIV_2, \b SYSCTL_PWMDIV_4, +//! \b SYSCTL_PWMDIV_8, \b SYSCTL_PWMDIV_16, \b SYSCTL_PWMDIV_32, or +//! \b SYSCTL_PWMDIV_64. +//! +//! This function sets the rate of the clock provided to the PWM module as a +//! ratio of the processor clock. This clock is used by the PWM module to +//! generate PWM signals; its rate forms the basis for all PWM signals. +//! +//! \note The clocking of the PWM is dependent upon the system clock rate as +//! configured by SysCtlClockSet(). +//! +//! \return None. +// +//***************************************************************************** +void +SysCtlPWMClockSet(unsigned long ulConfig) +{ + // + // Check the arguments. + // + ASSERT((ulConfig == SYSCTL_PWMDIV_1) || + (ulConfig == SYSCTL_PWMDIV_2) || + (ulConfig == SYSCTL_PWMDIV_4) || + (ulConfig == SYSCTL_PWMDIV_8) || + (ulConfig == SYSCTL_PWMDIV_16) || + (ulConfig == SYSCTL_PWMDIV_32) || + (ulConfig == SYSCTL_PWMDIV_64)); + + // + // Check that there is a PWM block on this part. + // + ASSERT(HWREG(SYSCTL_DC1) & SYSCTL_DC1_PWM); + + // + // Set the PWM clock configuration into the run-mode clock configuration + // register. + // + HWREG(SYSCTL_RCC) = ((HWREG(SYSCTL_RCC) & + ~(SYSCTL_RCC_USEPWMDIV | SYSCTL_RCC_PWMDIV_M)) | + ulConfig); +} + +//***************************************************************************** +// +//! Gets the current PWM clock configuration. +//! +//! This function returns the current PWM clock configuration. +//! +//! \return Returns the current PWM clock configuration; will be one of +//! \b SYSCTL_PWMDIV_1, \b SYSCTL_PWMDIV_2, \b SYSCTL_PWMDIV_4, +//! \b SYSCTL_PWMDIV_8, \b SYSCTL_PWMDIV_16, \b SYSCTL_PWMDIV_32, or +//! \b SYSCTL_PWMDIV_64. +// +//***************************************************************************** +unsigned long +SysCtlPWMClockGet(void) +{ + // + // Check that there is a PWM block on this part. + // + ASSERT(HWREG(SYSCTL_DC1) & SYSCTL_DC1_PWM); + + // + // Return the current PWM clock configuration. Make sure that + // SYSCTL_PWMDIV_1 is returned in all cases where the divider is disabled. + // + if(!(HWREG(SYSCTL_RCC) & SYSCTL_RCC_USEPWMDIV)) + { + // + // The divider is not active so reflect this in the value we return. + // + return(SYSCTL_PWMDIV_1); + } + else + { + // + // The divider is active so directly return the masked register value. + // + return(HWREG(SYSCTL_RCC) & + (SYSCTL_RCC_USEPWMDIV | SYSCTL_RCC_PWMDIV_M)); + } +} + +//***************************************************************************** +// +//! Sets the sample rate of the ADC. +//! +//! \param ulSpeed is the desired sample rate of the ADC; must be one of +//! \b SYSCTL_ADCSPEED_1MSPS, \b SYSCTL_ADCSPEED_500KSPS, +//! \b SYSCTL_ADCSPEED_250KSPS, or \b SYSCTL_ADCSPEED_125KSPS. +//! +//! This function sets the rate at which the ADC samples are captured by the +//! ADC block. The sampling speed may be limited by the hardware, so the +//! sample rate may end up being slower than requested. SysCtlADCSpeedGet() +//! will return the actual speed in use. +//! +//! \return None. +// +//***************************************************************************** +void +SysCtlADCSpeedSet(unsigned long ulSpeed) +{ + // + // Check the arguments. + // + ASSERT((ulSpeed == SYSCTL_ADCSPEED_1MSPS) || + (ulSpeed == SYSCTL_ADCSPEED_500KSPS) || + (ulSpeed == SYSCTL_ADCSPEED_250KSPS) || + (ulSpeed == SYSCTL_ADCSPEED_125KSPS)); + + // + // Check that there is an ADC block on this part. + // + ASSERT(HWREG(SYSCTL_DC1) & SYSCTL_DC1_ADC0); + + // + // Set the ADC speed in run, sleep, and deep-sleep mode. + // + HWREG(SYSCTL_RCGC0) = ((HWREG(SYSCTL_RCGC0) & ~(SYSCTL_RCGC0_ADCSPD_M)) | + ulSpeed); + HWREG(SYSCTL_SCGC0) = ((HWREG(SYSCTL_SCGC0) & ~(SYSCTL_SCGC0_ADCSPD_M)) | + ulSpeed); +} + +//***************************************************************************** +// +//! Gets the sample rate of the ADC. +//! +//! This function gets the current sample rate of the ADC. +//! +//! \return Returns the current ADC sample rate; will be one of +//! \b SYSCTL_ADCSPEED_1MSPS, \b SYSCTL_ADCSPEED_500KSPS, +//! \b SYSCTL_ADCSPEED_250KSPS, or \b SYSCTL_ADCSPEED_125KSPS. +// +//***************************************************************************** +unsigned long +SysCtlADCSpeedGet(void) +{ + // + // Check that there is an ADC block on this part. + // + ASSERT(HWREG(SYSCTL_DC1) & SYSCTL_DC1_ADC0); + + // + // Return the current ADC speed. + // + return(HWREG(SYSCTL_RCGC0) & SYSCTL_RCGC0_ADCSPD_M); +} + +//***************************************************************************** +// +//! Configures the internal oscillator verification timer. +//! +//! \param bEnable is a boolean that is \b true if the internal oscillator +//! verification timer should be enabled. +//! +//! This function allows the internal oscillator verification timer to be +//! enabled or disabled. When enabled, an interrupt will be generated if the +//! internal oscillator ceases to operate. +//! +//! The internal oscillator verification timer is only available on +//! Sandstorm-class devices. +//! +//! \note Both oscillators (main and internal) must be enabled for this +//! verification timer to operate as the main oscillator will verify the +//! internal oscillator. +//! +//! \return None. +// +//***************************************************************************** +void +SysCtlIOSCVerificationSet(tBoolean bEnable) +{ + // + // Enable or disable the internal oscillator verification timer as + // requested. + // + if(bEnable) + { + HWREG(SYSCTL_RCC) |= SYSCTL_RCC_IOSCVER; + } + else + { + HWREG(SYSCTL_RCC) &= ~(SYSCTL_RCC_IOSCVER); + } +} + +//***************************************************************************** +// +//! Configures the main oscillator verification timer. +//! +//! \param bEnable is a boolean that is \b true if the main oscillator +//! verification timer should be enabled. +//! +//! This function allows the main oscillator verification timer to be enabled +//! or disabled. When enabled, an interrupt will be generated if the main +//! oscillator ceases to operate. +//! +//! The main oscillator verification timer is only available on +//! Sandstorm-class devices. +//! +//! \note Both oscillators (main and internal) must be enabled for this +//! verification timer to operate as the internal oscillator will verify the +//! main oscillator. +//! +//! \return None. +// +//***************************************************************************** +void +SysCtlMOSCVerificationSet(tBoolean bEnable) +{ + // + // Enable or disable the main oscillator verification timer as requested. + // + if(bEnable) + { + HWREG(SYSCTL_RCC) |= SYSCTL_RCC_MOSCVER; + } + else + { + HWREG(SYSCTL_RCC) &= ~(SYSCTL_RCC_MOSCVER); + } +} + +//***************************************************************************** +// +//! Configures the PLL verification timer. +//! +//! \param bEnable is a boolean that is \b true if the PLL verification timer +//! should be enabled. +//! +//! This function allows the PLL verification timer to be enabled or disabled. +//! When enabled, an interrupt will be generated if the PLL ceases to operate. +//! +//! The PLL verification timer is only available on Sandstorm-class devices. +//! +//! \note The main oscillator must be enabled for this verification timer to +//! operate as it is used to check the PLL. Also, the verification timer +//! should be disabled while the PLL is being reconfigured via +//! SysCtlClockSet(). +//! +//! \return None. +// +//***************************************************************************** +void +SysCtlPLLVerificationSet(tBoolean bEnable) +{ + // + // Enable or disable the PLL verification timer as requested. + // + if(bEnable) + { + HWREG(SYSCTL_RCC) |= SYSCTL_RCC_PLLVER; + } + else + { + HWREG(SYSCTL_RCC) &= ~(SYSCTL_RCC_PLLVER); + } +} + +//***************************************************************************** +// +//! Clears the clock verification status. +//! +//! This function clears the status of the clock verification timers, allowing +//! them to assert another failure if detected. +//! +//! The clock verification timers are only available on Sandstorm-class +//! devices. +//! +//! \return None. +// +//***************************************************************************** +void +SysCtlClkVerificationClear(void) +{ + // + // Clear the clock verification. + // + HWREG(SYSCTL_CLKVCLR) = SYSCTL_CLKVCLR_VERCLR; + + // + // The bit does not self-reset, so clear it. + // + HWREG(SYSCTL_CLKVCLR) = 0; +} + +//***************************************************************************** +// +//! Enables a GPIO peripheral for access from the AHB. +//! +//! \param ulGPIOPeripheral is the GPIO peripheral to enable. +//! +//! This function is used to enable the specified GPIO peripheral to be +//! accessed from the Advanced Host Bus (AHB) instead of the legacy Advanced +//! Peripheral Bus (APB). When a GPIO peripheral is enabled for AHB access, +//! the \b _AHB_BASE form of the base address should be used for GPIO +//! functions. For example, instead of using \b GPIO_PORTA_BASE as the base +//! address for GPIO functions, use \b GPIO_PORTA_AHB_BASE instead. +//! +//! The \e ulGPIOPeripheral argument must be only one of the following values: +//! \b SYSCTL_PERIPH_GPIOA, \b SYSCTL_PERIPH_GPIOB, \b SYSCTL_PERIPH_GPIOC, +//! \b SYSCTL_PERIPH_GPIOD, \b SYSCTL_PERIPH_GPIOE, \b SYSCTL_PERIPH_GPIOF, +//! \b SYSCTL_PERIPH_GPIOG, or \b SYSCTL_PERIPH_GPIOH. +//! +//! \return None. +// +//***************************************************************************** +void +SysCtlGPIOAHBEnable(unsigned long ulGPIOPeripheral) +{ + // + // Check the arguments. + // + ASSERT((ulGPIOPeripheral == SYSCTL_PERIPH_GPIOA) || + (ulGPIOPeripheral == SYSCTL_PERIPH_GPIOB) || + (ulGPIOPeripheral == SYSCTL_PERIPH_GPIOC) || + (ulGPIOPeripheral == SYSCTL_PERIPH_GPIOD) || + (ulGPIOPeripheral == SYSCTL_PERIPH_GPIOE) || + (ulGPIOPeripheral == SYSCTL_PERIPH_GPIOF) || + (ulGPIOPeripheral == SYSCTL_PERIPH_GPIOG) || + (ulGPIOPeripheral == SYSCTL_PERIPH_GPIOH) || + (ulGPIOPeripheral == SYSCTL_PERIPH_GPIOJ)); + + // + // Enable this GPIO for AHB access. + // + HWREG(SYSCTL_GPIOHSCTL) |= ulGPIOPeripheral & 0xFFFF; +} + +//***************************************************************************** +// +//! Disables a GPIO peripheral for access from the AHB. +//! +//! \param ulGPIOPeripheral is the GPIO peripheral to disable. +//! +//! This function disables the specified GPIO peripheral for access from the +//! Advanced Host Bus (AHB). Once disabled, the GPIO peripheral is accessed +//! from the legacy Advanced Peripheral Bus (AHB). +//! +//! The \b ulGPIOPeripheral argument must be only one of the following values: +//! \b SYSCTL_PERIPH_GPIOA, \b SYSCTL_PERIPH_GPIOB, \b SYSCTL_PERIPH_GPIOC, +//! \b SYSCTL_PERIPH_GPIOD, \b SYSCTL_PERIPH_GPIOE, \b SYSCTL_PERIPH_GPIOF, +//! \b SYSCTL_PERIPH_GPIOG, or \b SYSCTL_PERIPH_GPIOH. +//! +//! \return None. +// +//***************************************************************************** +void +SysCtlGPIOAHBDisable(unsigned long ulGPIOPeripheral) +{ + // + // Check the arguments. + // + ASSERT((ulGPIOPeripheral == SYSCTL_PERIPH_GPIOA) || + (ulGPIOPeripheral == SYSCTL_PERIPH_GPIOB) || + (ulGPIOPeripheral == SYSCTL_PERIPH_GPIOC) || + (ulGPIOPeripheral == SYSCTL_PERIPH_GPIOD) || + (ulGPIOPeripheral == SYSCTL_PERIPH_GPIOE) || + (ulGPIOPeripheral == SYSCTL_PERIPH_GPIOF) || + (ulGPIOPeripheral == SYSCTL_PERIPH_GPIOG) || + (ulGPIOPeripheral == SYSCTL_PERIPH_GPIOH) || + (ulGPIOPeripheral == SYSCTL_PERIPH_GPIOJ)); + + // + // Disable this GPIO for AHB access. + // + HWREG(SYSCTL_GPIOHSCTL) &= ~(ulGPIOPeripheral & 0xFFFF); +} + +//***************************************************************************** +// +//! Powers up the USB PLL. +//! +//! This function will enable the USB controller's PLL which is used by it's +//! physical layer. This call is necessary before connecting to any external +//! devices. +//! +//! \return None. +// +//***************************************************************************** +void +SysCtlUSBPLLEnable(void) +{ + // + // Turn on the USB PLL. + // + HWREG(SYSCTL_RCC2) &= ~SYSCTL_RCC2_USBPWRDN; +} + +//***************************************************************************** +// +//! Powers down the USB PLL. +//! +//! This function will disable the USB controller's PLL which is used by it's +//! physical layer. The USB registers are still accessible, but the physical +//! layer will no longer function. +//! +//! \return None. +// +//***************************************************************************** +void +SysCtlUSBPLLDisable(void) +{ + // + // Turn of USB PLL. + // + HWREG(SYSCTL_RCC2) |= SYSCTL_RCC2_USBPWRDN; +} + +//***************************************************************************** +// +//! Sets the MCLK frequency provided to the I2S module. +//! +//! \param ulInputClock is the input clock to the MCLK divider. If this is +//! zero, the value is computed from the current PLL configuration. +//! \param ulMClk is the desired MCLK frequency. If this is zero, MCLK output +//! is disabled. +//! +//! This function sets the dividers to provide MCLK to the I2S module. A MCLK +//! divider will be chosen that produces the MCLK frequency that is the closest +//! possible to the requested frequency, which may be above or below the +//! requested frequency. +//! +//! The actual MCLK frequency will be returned. It is the responsibility of +//! the application to determine if the selected MCLK is acceptable; in general +//! the human ear can not discern the frequency difference if it is within 0.3% +//! of the desired frequency (though there is a very small percentage of the +//! population that can discern lower frequency deviations). +//! +//! \return Returns the actual MCLK frequency. +// +//***************************************************************************** +unsigned long +SysCtlI2SMClkSet(unsigned long ulInputClock, unsigned long ulMClk) +{ + unsigned long ulDivInt, ulDivFrac, ulPLL; + + // + // See if the I2S MCLK should be disabled. + // + if(ulMClk == 0) + { + // + // Disable the I2S MCLK and return. + // + HWREG(SYSCTL_I2SMCLKCFG) = 0; + return(0); + } + + // + // See if the input clock was specified. + // + if(ulInputClock == 0) + { + // + // The input clock was not specified, so compute the output frequency + // of the PLL. Get the current PLL configuration. + // + ulPLL = HWREG(SYSCTL_PLLCFG); + + // + // Get the frequency of the crystal in use. + // + ulInputClock = g_pulXtals[(HWREG(SYSCTL_RCC) & SYSCTL_RCC_XTAL_M) >> + SYSCTL_RCC_XTAL_S]; + + // + // Calculate the PLL output frequency. + // + ulInputClock = ((ulInputClock * ((ulPLL & SYSCTL_PLLCFG_F_M) >> + SYSCTL_PLLCFG_F_S)) / + ((((ulPLL & SYSCTL_PLLCFG_R_M) >> + SYSCTL_PLLCFG_R_S) + 1))); + + // + // See if the optional output divide by 2 is being used. + // + if(ulPLL & SYSCTL_PLLCFG_OD_2) + { + ulInputClock /= 2; + } + + // + // See if the optional output divide by 4 is being used. + // + if(ulPLL & SYSCTL_PLLCFG_OD_4) + { + ulInputClock /= 4; + } + } + + // + // Verify that the requested MCLK frequency is attainable. + // + ASSERT(ulMClk < ulInputClock); + + // + // Add a rounding factor to the input clock, so that the MCLK frequency + // that is closest to the desire value is selected. + // + ulInputClock += (ulMClk / 32) - 1; + + // + // Compute the integer portion of the MCLK divider. + // + ulDivInt = ulInputClock / ulMClk; + + // + // If the divisor is too large, then simply use the maximum divisor. + // + if(CLASS_IS_TEMPEST && REVISION_IS_B1 && (ulDivInt > 255)) + { + ulDivInt = 255; + ulDivFrac = 15; + } + else if(ulDivInt > 1023) + { + ulDivInt = 1023; + ulDivFrac = 15; + } + else + { + // + // Compute the fractional portion of the MCLK divider. + // + ulDivFrac = ((ulInputClock - (ulDivInt * ulMClk)) * 16) / ulMClk; + } + + // + // Set the divisor for the Tx and Rx MCLK generators and enable the clocks. + // + HWREG(SYSCTL_I2SMCLKCFG) = (SYSCTL_I2SMCLKCFG_RXEN | + (ulDivInt << SYSCTL_I2SMCLKCFG_RXI_S) | + (ulDivFrac << SYSCTL_I2SMCLKCFG_RXF_S) | + SYSCTL_I2SMCLKCFG_TXEN | + (ulDivInt << SYSCTL_I2SMCLKCFG_TXI_S) | + (ulDivFrac << SYSCTL_I2SMCLKCFG_TXF_S)); + + // + // Return the actual MCLK frequency. + // + ulInputClock -= (ulMClk / 32) - 1; + ulDivInt = (ulDivInt * 16) + ulDivFrac; + ulMClk = (ulInputClock / ulDivInt) * 16; + ulMClk += ((ulInputClock - ((ulMClk / 16) * ulDivInt)) * 16) / ulDivInt; + return(ulMClk); +} + +//***************************************************************************** +// +// Close the Doxygen group. +//! @} +// +//***************************************************************************** diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/sysctl.h b/bsp/lm3s_9b9x/Libraries/driverlib/sysctl.h new file mode 100644 index 0000000000000000000000000000000000000000..cc24395ec68277d73e40c13b2807bbdb26315a1e --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/sysctl.h @@ -0,0 +1,466 @@ +//***************************************************************************** +// +// sysctl.h - Prototypes for the system control driver. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +#ifndef __SYSCTL_H__ +#define __SYSCTL_H__ + +//***************************************************************************** +// +// If building with a C++ compiler, make all of the definitions in this header +// have a C binding. +// +//***************************************************************************** +#ifdef __cplusplus +extern "C" +{ +#endif + +//***************************************************************************** +// +// The following are values that can be passed to the +// SysCtlPeripheralPresent(), SysCtlPeripheralEnable(), +// SysCtlPeripheralDisable(), and SysCtlPeripheralReset() APIs as the +// ulPeripheral parameter. The peripherals in the fourth group (upper nibble +// is 3) can only be used with the SysCtlPeripheralPresent() API. +// +//***************************************************************************** +#ifndef DEPRECATED +#define SYSCTL_PERIPH_WDOG 0x00000008 // Watchdog +#endif +#define SYSCTL_PERIPH_WDOG0 0x00000008 // Watchdog 0 +#define SYSCTL_PERIPH_HIBERNATE 0x00000040 // Hibernation module +#ifndef DEPRECATED +#define SYSCTL_PERIPH_ADC 0x00100001 // ADC +#endif +#define SYSCTL_PERIPH_ADC0 0x00100001 // ADC0 +#define SYSCTL_PERIPH_ADC1 0x00100002 // ADC1 +#define SYSCTL_PERIPH_PWM 0x00100010 // PWM +#define SYSCTL_PERIPH_CAN0 0x00100100 // CAN 0 +#define SYSCTL_PERIPH_CAN1 0x00100200 // CAN 1 +#define SYSCTL_PERIPH_CAN2 0x00100400 // CAN 2 +#define SYSCTL_PERIPH_WDOG1 0x00101000 // Watchdog 1 +#define SYSCTL_PERIPH_UART0 0x10000001 // UART 0 +#define SYSCTL_PERIPH_UART1 0x10000002 // UART 1 +#define SYSCTL_PERIPH_UART2 0x10000004 // UART 2 +#ifndef DEPRECATED +#define SYSCTL_PERIPH_SSI 0x10000010 // SSI +#endif +#define SYSCTL_PERIPH_SSI0 0x10000010 // SSI 0 +#define SYSCTL_PERIPH_SSI1 0x10000020 // SSI 1 +#ifndef DEPRECATED +#define SYSCTL_PERIPH_QEI 0x10000100 // QEI +#endif +#define SYSCTL_PERIPH_QEI0 0x10000100 // QEI 0 +#define SYSCTL_PERIPH_QEI1 0x10000200 // QEI 1 +#ifndef DEPRECATED +#define SYSCTL_PERIPH_I2C 0x10001000 // I2C +#endif +#define SYSCTL_PERIPH_I2C0 0x10001000 // I2C 0 +#define SYSCTL_PERIPH_I2C1 0x10004000 // I2C 1 +#define SYSCTL_PERIPH_TIMER0 0x10100001 // Timer 0 +#define SYSCTL_PERIPH_TIMER1 0x10100002 // Timer 1 +#define SYSCTL_PERIPH_TIMER2 0x10100004 // Timer 2 +#define SYSCTL_PERIPH_TIMER3 0x10100008 // Timer 3 +#define SYSCTL_PERIPH_COMP0 0x10100100 // Analog comparator 0 +#define SYSCTL_PERIPH_COMP1 0x10100200 // Analog comparator 1 +#define SYSCTL_PERIPH_COMP2 0x10100400 // Analog comparator 2 +#define SYSCTL_PERIPH_I2S0 0x10101000 // I2S0 +#define SYSCTL_PERIPH_EPI0 0x10104000 // EPI0 +#define SYSCTL_PERIPH_GPIOA 0x20000001 // GPIO A +#define SYSCTL_PERIPH_GPIOB 0x20000002 // GPIO B +#define SYSCTL_PERIPH_GPIOC 0x20000004 // GPIO C +#define SYSCTL_PERIPH_GPIOD 0x20000008 // GPIO D +#define SYSCTL_PERIPH_GPIOE 0x20000010 // GPIO E +#define SYSCTL_PERIPH_GPIOF 0x20000020 // GPIO F +#define SYSCTL_PERIPH_GPIOG 0x20000040 // GPIO G +#define SYSCTL_PERIPH_GPIOH 0x20000080 // GPIO H +#define SYSCTL_PERIPH_GPIOJ 0x20000100 // GPIO J +#define SYSCTL_PERIPH_UDMA 0x20002000 // uDMA +#define SYSCTL_PERIPH_USB0 0x20100001 // USB0 +#define SYSCTL_PERIPH_ETH 0x20105000 // ETH +#define SYSCTL_PERIPH_IEEE1588 0x20100100 // IEEE1588 +#define SYSCTL_PERIPH_PLL 0x30000010 // PLL +#define SYSCTL_PERIPH_TEMP 0x30000020 // Temperature sensor +#define SYSCTL_PERIPH_MPU 0x30000080 // Cortex M3 MPU + +//***************************************************************************** +// +// The following are values that can be passed to the SysCtlPinPresent() API +// as the ulPin parameter. +// +//***************************************************************************** +#define SYSCTL_PIN_PWM0 0x00000001 // PWM0 pin +#define SYSCTL_PIN_PWM1 0x00000002 // PWM1 pin +#define SYSCTL_PIN_PWM2 0x00000004 // PWM2 pin +#define SYSCTL_PIN_PWM3 0x00000008 // PWM3 pin +#define SYSCTL_PIN_PWM4 0x00000010 // PWM4 pin +#define SYSCTL_PIN_PWM5 0x00000020 // PWM5 pin +#define SYSCTL_PIN_PWM6 0x00000040 // PWM6 pin +#define SYSCTL_PIN_PWM7 0x00000080 // PWM7 pin +#define SYSCTL_PIN_C0MINUS 0x00000040 // C0- pin +#define SYSCTL_PIN_C0PLUS 0x00000080 // C0+ pin +#define SYSCTL_PIN_C0O 0x00000100 // C0o pin +#define SYSCTL_PIN_C1MINUS 0x00000200 // C1- pin +#define SYSCTL_PIN_C1PLUS 0x00000400 // C1+ pin +#define SYSCTL_PIN_C1O 0x00000800 // C1o pin +#define SYSCTL_PIN_C2MINUS 0x00001000 // C2- pin +#define SYSCTL_PIN_C2PLUS 0x00002000 // C2+ pin +#define SYSCTL_PIN_C2O 0x00004000 // C2o pin +#define SYSCTL_PIN_MC_FAULT0 0x00008000 // MC0 Fault pin +#define SYSCTL_PIN_ADC0 0x00010000 // ADC0 pin +#define SYSCTL_PIN_ADC1 0x00020000 // ADC1 pin +#define SYSCTL_PIN_ADC2 0x00040000 // ADC2 pin +#define SYSCTL_PIN_ADC3 0x00080000 // ADC3 pin +#define SYSCTL_PIN_ADC4 0x00100000 // ADC4 pin +#define SYSCTL_PIN_ADC5 0x00200000 // ADC5 pin +#define SYSCTL_PIN_ADC6 0x00400000 // ADC6 pin +#define SYSCTL_PIN_ADC7 0x00800000 // ADC7 pin +#define SYSCTL_PIN_CCP0 0x01000000 // CCP0 pin +#define SYSCTL_PIN_CCP1 0x02000000 // CCP1 pin +#define SYSCTL_PIN_CCP2 0x04000000 // CCP2 pin +#define SYSCTL_PIN_CCP3 0x08000000 // CCP3 pin +#define SYSCTL_PIN_CCP4 0x10000000 // CCP4 pin +#define SYSCTL_PIN_CCP5 0x20000000 // CCP5 pin +#define SYSCTL_PIN_32KHZ 0x80000000 // 32kHz pin + +//***************************************************************************** +// +// The following are values that can be passed to the SysCtlLDOSet() API as +// the ulVoltage value, or returned by the SysCtlLDOGet() API. +// +//***************************************************************************** +#define SYSCTL_LDO_2_25V 0x00000005 // LDO output of 2.25V +#define SYSCTL_LDO_2_30V 0x00000004 // LDO output of 2.30V +#define SYSCTL_LDO_2_35V 0x00000003 // LDO output of 2.35V +#define SYSCTL_LDO_2_40V 0x00000002 // LDO output of 2.40V +#define SYSCTL_LDO_2_45V 0x00000001 // LDO output of 2.45V +#define SYSCTL_LDO_2_50V 0x00000000 // LDO output of 2.50V +#define SYSCTL_LDO_2_55V 0x0000001f // LDO output of 2.55V +#define SYSCTL_LDO_2_60V 0x0000001e // LDO output of 2.60V +#define SYSCTL_LDO_2_65V 0x0000001d // LDO output of 2.65V +#define SYSCTL_LDO_2_70V 0x0000001c // LDO output of 2.70V +#define SYSCTL_LDO_2_75V 0x0000001b // LDO output of 2.75V + +//***************************************************************************** +// +// The following are values that can be passed to the SysCtlLDOConfigSet() API. +// +//***************************************************************************** +#define SYSCTL_LDOCFG_ARST 0x00000001 // Allow LDO failure to reset +#define SYSCTL_LDOCFG_NORST 0x00000000 // Do not reset on LDO failure + +//***************************************************************************** +// +// The following are values that can be passed to the SysCtlIntEnable(), +// SysCtlIntDisable(), and SysCtlIntClear() APIs, or returned in the bit mask +// by the SysCtlIntStatus() API. +// +//***************************************************************************** +#define SYSCTL_INT_MOSC_PUP 0x00000100 // MOSC power-up interrupt +#define SYSCTL_INT_USBPLL_LOCK 0x00000080 // USB PLL lock interrupt +#define SYSCTL_INT_PLL_LOCK 0x00000040 // PLL lock interrupt +#define SYSCTL_INT_CUR_LIMIT 0x00000020 // Current limit interrupt +#define SYSCTL_INT_IOSC_FAIL 0x00000010 // Internal oscillator failure int +#define SYSCTL_INT_MOSC_FAIL 0x00000008 // Main oscillator failure int +#define SYSCTL_INT_POR 0x00000004 // Power on reset interrupt +#define SYSCTL_INT_BOR 0x00000002 // Brown out interrupt +#define SYSCTL_INT_PLL_FAIL 0x00000001 // PLL failure interrupt + +//***************************************************************************** +// +// The following are values that can be passed to the SysCtlResetCauseClear() +// API or returned by the SysCtlResetCauseGet() API. +// +//***************************************************************************** +#define SYSCTL_CAUSE_LDO 0x00000020 // LDO power not OK reset +#define SYSCTL_CAUSE_SW 0x00000010 // Software reset +#define SYSCTL_CAUSE_WDOG 0x00000008 // Watchdog reset +#define SYSCTL_CAUSE_BOR 0x00000004 // Brown-out reset +#define SYSCTL_CAUSE_POR 0x00000002 // Power on reset +#define SYSCTL_CAUSE_EXT 0x00000001 // External reset + +//***************************************************************************** +// +// The following are values that can be passed to the SysCtlBrownOutConfigSet() +// API as the ulConfig parameter. +// +//***************************************************************************** +#define SYSCTL_BOR_RESET 0x00000002 // Reset instead of interrupting +#define SYSCTL_BOR_RESAMPLE 0x00000001 // Resample BOR before asserting + +//***************************************************************************** +// +// The following are values that can be passed to the SysCtlPWMClockSet() API +// as the ulConfig parameter, and can be returned by the SysCtlPWMClockGet() +// API. +// +//***************************************************************************** +#define SYSCTL_PWMDIV_1 0x00000000 // PWM clock is processor clock /1 +#define SYSCTL_PWMDIV_2 0x00100000 // PWM clock is processor clock /2 +#define SYSCTL_PWMDIV_4 0x00120000 // PWM clock is processor clock /4 +#define SYSCTL_PWMDIV_8 0x00140000 // PWM clock is processor clock /8 +#define SYSCTL_PWMDIV_16 0x00160000 // PWM clock is processor clock /16 +#define SYSCTL_PWMDIV_32 0x00180000 // PWM clock is processor clock /32 +#define SYSCTL_PWMDIV_64 0x001A0000 // PWM clock is processor clock /64 + +//***************************************************************************** +// +// The following are values that can be passed to the SysCtlADCSpeedSet() API +// as the ulSpeed parameter, and can be returned by the SyCtlADCSpeedGet() +// API. +// +//***************************************************************************** +#define SYSCTL_ADCSPEED_1MSPS 0x00000F00 // 1,000,000 samples per second +#define SYSCTL_ADCSPEED_500KSPS 0x00000A00 // 500,000 samples per second +#define SYSCTL_ADCSPEED_250KSPS 0x00000500 // 250,000 samples per second +#define SYSCTL_ADCSPEED_125KSPS 0x00000000 // 125,000 samples per second + +//***************************************************************************** +// +// The following are values that can be passed to the SysCtlClockSet() API as +// the ulConfig parameter. +// +//***************************************************************************** +#define SYSCTL_SYSDIV_1 0x07800000 // Processor clock is osc/pll /1 +#define SYSCTL_SYSDIV_2 0x00C00000 // Processor clock is osc/pll /2 +#define SYSCTL_SYSDIV_3 0x01400000 // Processor clock is osc/pll /3 +#define SYSCTL_SYSDIV_4 0x01C00000 // Processor clock is osc/pll /4 +#define SYSCTL_SYSDIV_5 0x02400000 // Processor clock is osc/pll /5 +#define SYSCTL_SYSDIV_6 0x02C00000 // Processor clock is osc/pll /6 +#define SYSCTL_SYSDIV_7 0x03400000 // Processor clock is osc/pll /7 +#define SYSCTL_SYSDIV_8 0x03C00000 // Processor clock is osc/pll /8 +#define SYSCTL_SYSDIV_9 0x04400000 // Processor clock is osc/pll /9 +#define SYSCTL_SYSDIV_10 0x04C00000 // Processor clock is osc/pll /10 +#define SYSCTL_SYSDIV_11 0x05400000 // Processor clock is osc/pll /11 +#define SYSCTL_SYSDIV_12 0x05C00000 // Processor clock is osc/pll /12 +#define SYSCTL_SYSDIV_13 0x06400000 // Processor clock is osc/pll /13 +#define SYSCTL_SYSDIV_14 0x06C00000 // Processor clock is osc/pll /14 +#define SYSCTL_SYSDIV_15 0x07400000 // Processor clock is osc/pll /15 +#define SYSCTL_SYSDIV_16 0x07C00000 // Processor clock is osc/pll /16 +#define SYSCTL_SYSDIV_17 0x88400000 // Processor clock is osc/pll /17 +#define SYSCTL_SYSDIV_18 0x88C00000 // Processor clock is osc/pll /18 +#define SYSCTL_SYSDIV_19 0x89400000 // Processor clock is osc/pll /19 +#define SYSCTL_SYSDIV_20 0x89C00000 // Processor clock is osc/pll /20 +#define SYSCTL_SYSDIV_21 0x8A400000 // Processor clock is osc/pll /21 +#define SYSCTL_SYSDIV_22 0x8AC00000 // Processor clock is osc/pll /22 +#define SYSCTL_SYSDIV_23 0x8B400000 // Processor clock is osc/pll /23 +#define SYSCTL_SYSDIV_24 0x8BC00000 // Processor clock is osc/pll /24 +#define SYSCTL_SYSDIV_25 0x8C400000 // Processor clock is osc/pll /25 +#define SYSCTL_SYSDIV_26 0x8CC00000 // Processor clock is osc/pll /26 +#define SYSCTL_SYSDIV_27 0x8D400000 // Processor clock is osc/pll /27 +#define SYSCTL_SYSDIV_28 0x8DC00000 // Processor clock is osc/pll /28 +#define SYSCTL_SYSDIV_29 0x8E400000 // Processor clock is osc/pll /29 +#define SYSCTL_SYSDIV_30 0x8EC00000 // Processor clock is osc/pll /30 +#define SYSCTL_SYSDIV_31 0x8F400000 // Processor clock is osc/pll /31 +#define SYSCTL_SYSDIV_32 0x8FC00000 // Processor clock is osc/pll /32 +#define SYSCTL_SYSDIV_33 0x90400000 // Processor clock is osc/pll /33 +#define SYSCTL_SYSDIV_34 0x90C00000 // Processor clock is osc/pll /34 +#define SYSCTL_SYSDIV_35 0x91400000 // Processor clock is osc/pll /35 +#define SYSCTL_SYSDIV_36 0x91C00000 // Processor clock is osc/pll /36 +#define SYSCTL_SYSDIV_37 0x92400000 // Processor clock is osc/pll /37 +#define SYSCTL_SYSDIV_38 0x92C00000 // Processor clock is osc/pll /38 +#define SYSCTL_SYSDIV_39 0x93400000 // Processor clock is osc/pll /39 +#define SYSCTL_SYSDIV_40 0x93C00000 // Processor clock is osc/pll /40 +#define SYSCTL_SYSDIV_41 0x94400000 // Processor clock is osc/pll /41 +#define SYSCTL_SYSDIV_42 0x94C00000 // Processor clock is osc/pll /42 +#define SYSCTL_SYSDIV_43 0x95400000 // Processor clock is osc/pll /43 +#define SYSCTL_SYSDIV_44 0x95C00000 // Processor clock is osc/pll /44 +#define SYSCTL_SYSDIV_45 0x96400000 // Processor clock is osc/pll /45 +#define SYSCTL_SYSDIV_46 0x96C00000 // Processor clock is osc/pll /46 +#define SYSCTL_SYSDIV_47 0x97400000 // Processor clock is osc/pll /47 +#define SYSCTL_SYSDIV_48 0x97C00000 // Processor clock is osc/pll /48 +#define SYSCTL_SYSDIV_49 0x98400000 // Processor clock is osc/pll /49 +#define SYSCTL_SYSDIV_50 0x98C00000 // Processor clock is osc/pll /50 +#define SYSCTL_SYSDIV_51 0x99400000 // Processor clock is osc/pll /51 +#define SYSCTL_SYSDIV_52 0x99C00000 // Processor clock is osc/pll /52 +#define SYSCTL_SYSDIV_53 0x9A400000 // Processor clock is osc/pll /53 +#define SYSCTL_SYSDIV_54 0x9AC00000 // Processor clock is osc/pll /54 +#define SYSCTL_SYSDIV_55 0x9B400000 // Processor clock is osc/pll /55 +#define SYSCTL_SYSDIV_56 0x9BC00000 // Processor clock is osc/pll /56 +#define SYSCTL_SYSDIV_57 0x9C400000 // Processor clock is osc/pll /57 +#define SYSCTL_SYSDIV_58 0x9CC00000 // Processor clock is osc/pll /58 +#define SYSCTL_SYSDIV_59 0x9D400000 // Processor clock is osc/pll /59 +#define SYSCTL_SYSDIV_60 0x9DC00000 // Processor clock is osc/pll /60 +#define SYSCTL_SYSDIV_61 0x9E400000 // Processor clock is osc/pll /61 +#define SYSCTL_SYSDIV_62 0x9EC00000 // Processor clock is osc/pll /62 +#define SYSCTL_SYSDIV_63 0x9F400000 // Processor clock is osc/pll /63 +#define SYSCTL_SYSDIV_64 0x9FC00000 // Processor clock is osc/pll /64 +#define SYSCTL_SYSDIV_2_5 0xC1000000 // Processor clock is pll / 2.5 +#define SYSCTL_SYSDIV_3_5 0xC1800000 // Processor clock is pll / 3.5 +#define SYSCTL_SYSDIV_4_5 0xC2000000 // Processor clock is pll / 4.5 +#define SYSCTL_SYSDIV_5_5 0xC2800000 // Processor clock is pll / 5.5 +#define SYSCTL_SYSDIV_6_5 0xC3000000 // Processor clock is pll / 6.5 +#define SYSCTL_SYSDIV_7_5 0xC3800000 // Processor clock is pll / 7.5 +#define SYSCTL_SYSDIV_8_5 0xC4000000 // Processor clock is pll / 8.5 +#define SYSCTL_SYSDIV_9_5 0xC4800000 // Processor clock is pll / 9.5 +#define SYSCTL_SYSDIV_10_5 0xC5000000 // Processor clock is pll / 10.5 +#define SYSCTL_SYSDIV_11_5 0xC5800000 // Processor clock is pll / 11.5 +#define SYSCTL_SYSDIV_12_5 0xC6000000 // Processor clock is pll / 12.5 +#define SYSCTL_SYSDIV_13_5 0xC6800000 // Processor clock is pll / 13.5 +#define SYSCTL_SYSDIV_14_5 0xC7000000 // Processor clock is pll / 14.5 +#define SYSCTL_SYSDIV_15_5 0xC7800000 // Processor clock is pll / 15.5 +#define SYSCTL_SYSDIV_16_5 0xC8000000 // Processor clock is pll / 16.5 +#define SYSCTL_SYSDIV_17_5 0xC8800000 // Processor clock is pll / 17.5 +#define SYSCTL_SYSDIV_18_5 0xC9000000 // Processor clock is pll / 18.5 +#define SYSCTL_SYSDIV_19_5 0xC9800000 // Processor clock is pll / 19.5 +#define SYSCTL_SYSDIV_20_5 0xCA000000 // Processor clock is pll / 20.5 +#define SYSCTL_SYSDIV_21_5 0xCA800000 // Processor clock is pll / 21.5 +#define SYSCTL_SYSDIV_22_5 0xCB000000 // Processor clock is pll / 22.5 +#define SYSCTL_SYSDIV_23_5 0xCB800000 // Processor clock is pll / 23.5 +#define SYSCTL_SYSDIV_24_5 0xCC000000 // Processor clock is pll / 24.5 +#define SYSCTL_SYSDIV_25_5 0xCC800000 // Processor clock is pll / 25.5 +#define SYSCTL_SYSDIV_26_5 0xCD000000 // Processor clock is pll / 26.5 +#define SYSCTL_SYSDIV_27_5 0xCD800000 // Processor clock is pll / 27.5 +#define SYSCTL_SYSDIV_28_5 0xCE000000 // Processor clock is pll / 28.5 +#define SYSCTL_SYSDIV_29_5 0xCE800000 // Processor clock is pll / 29.5 +#define SYSCTL_SYSDIV_30_5 0xCF000000 // Processor clock is pll / 30.5 +#define SYSCTL_SYSDIV_31_5 0xCF800000 // Processor clock is pll / 31.5 +#define SYSCTL_SYSDIV_32_5 0xD0000000 // Processor clock is pll / 32.5 +#define SYSCTL_SYSDIV_33_5 0xD0800000 // Processor clock is pll / 33.5 +#define SYSCTL_SYSDIV_34_5 0xD1000000 // Processor clock is pll / 34.5 +#define SYSCTL_SYSDIV_35_5 0xD1800000 // Processor clock is pll / 35.5 +#define SYSCTL_SYSDIV_36_5 0xD2000000 // Processor clock is pll / 36.5 +#define SYSCTL_SYSDIV_37_5 0xD2800000 // Processor clock is pll / 37.5 +#define SYSCTL_SYSDIV_38_5 0xD3000000 // Processor clock is pll / 38.5 +#define SYSCTL_SYSDIV_39_5 0xD3800000 // Processor clock is pll / 39.5 +#define SYSCTL_SYSDIV_40_5 0xD4000000 // Processor clock is pll / 40.5 +#define SYSCTL_SYSDIV_41_5 0xD4800000 // Processor clock is pll / 41.5 +#define SYSCTL_SYSDIV_42_5 0xD5000000 // Processor clock is pll / 42.5 +#define SYSCTL_SYSDIV_43_5 0xD5800000 // Processor clock is pll / 43.5 +#define SYSCTL_SYSDIV_44_5 0xD6000000 // Processor clock is pll / 44.5 +#define SYSCTL_SYSDIV_45_5 0xD6800000 // Processor clock is pll / 45.5 +#define SYSCTL_SYSDIV_46_5 0xD7000000 // Processor clock is pll / 46.5 +#define SYSCTL_SYSDIV_47_5 0xD7800000 // Processor clock is pll / 47.5 +#define SYSCTL_SYSDIV_48_5 0xD8000000 // Processor clock is pll / 48.5 +#define SYSCTL_SYSDIV_49_5 0xD8800000 // Processor clock is pll / 49.5 +#define SYSCTL_SYSDIV_50_5 0xD9000000 // Processor clock is pll / 50.5 +#define SYSCTL_SYSDIV_51_5 0xD9800000 // Processor clock is pll / 51.5 +#define SYSCTL_SYSDIV_52_5 0xDA000000 // Processor clock is pll / 52.5 +#define SYSCTL_SYSDIV_53_5 0xDA800000 // Processor clock is pll / 53.5 +#define SYSCTL_SYSDIV_54_5 0xDB000000 // Processor clock is pll / 54.5 +#define SYSCTL_SYSDIV_55_5 0xDB800000 // Processor clock is pll / 55.5 +#define SYSCTL_SYSDIV_56_5 0xDC000000 // Processor clock is pll / 56.5 +#define SYSCTL_SYSDIV_57_5 0xDC800000 // Processor clock is pll / 57.5 +#define SYSCTL_SYSDIV_58_5 0xDD000000 // Processor clock is pll / 58.5 +#define SYSCTL_SYSDIV_59_5 0xDD800000 // Processor clock is pll / 59.5 +#define SYSCTL_SYSDIV_60_5 0xDE000000 // Processor clock is pll / 60.5 +#define SYSCTL_SYSDIV_61_5 0xDE800000 // Processor clock is pll / 61.5 +#define SYSCTL_SYSDIV_62_5 0xDF000000 // Processor clock is pll / 62.5 +#define SYSCTL_SYSDIV_63_5 0xDF800000 // Processor clock is pll / 63.5 +#define SYSCTL_USE_PLL 0x00000000 // System clock is the PLL clock +#define SYSCTL_USE_OSC 0x00003800 // System clock is the osc clock +#define SYSCTL_XTAL_1MHZ 0x00000000 // External crystal is 1MHz +#define SYSCTL_XTAL_1_84MHZ 0x00000040 // External crystal is 1.8432MHz +#define SYSCTL_XTAL_2MHZ 0x00000080 // External crystal is 2MHz +#define SYSCTL_XTAL_2_45MHZ 0x000000C0 // External crystal is 2.4576MHz +#define SYSCTL_XTAL_3_57MHZ 0x00000100 // External crystal is 3.579545MHz +#define SYSCTL_XTAL_3_68MHZ 0x00000140 // External crystal is 3.6864MHz +#define SYSCTL_XTAL_4MHZ 0x00000180 // External crystal is 4MHz +#define SYSCTL_XTAL_4_09MHZ 0x000001C0 // External crystal is 4.096MHz +#define SYSCTL_XTAL_4_91MHZ 0x00000200 // External crystal is 4.9152MHz +#define SYSCTL_XTAL_5MHZ 0x00000240 // External crystal is 5MHz +#define SYSCTL_XTAL_5_12MHZ 0x00000280 // External crystal is 5.12MHz +#define SYSCTL_XTAL_6MHZ 0x000002C0 // External crystal is 6MHz +#define SYSCTL_XTAL_6_14MHZ 0x00000300 // External crystal is 6.144MHz +#define SYSCTL_XTAL_7_37MHZ 0x00000340 // External crystal is 7.3728MHz +#define SYSCTL_XTAL_8MHZ 0x00000380 // External crystal is 8MHz +#define SYSCTL_XTAL_8_19MHZ 0x000003C0 // External crystal is 8.192MHz +#define SYSCTL_XTAL_10MHZ 0x00000400 // External crystal is 10 MHz +#define SYSCTL_XTAL_12MHZ 0x00000440 // External crystal is 12 MHz +#define SYSCTL_XTAL_12_2MHZ 0x00000480 // External crystal is 12.288 MHz +#define SYSCTL_XTAL_13_5MHZ 0x000004C0 // External crystal is 13.56 MHz +#define SYSCTL_XTAL_14_3MHZ 0x00000500 // External crystal is 14.31818 MHz +#define SYSCTL_XTAL_16MHZ 0x00000540 // External crystal is 16 MHz +#define SYSCTL_XTAL_16_3MHZ 0x00000580 // External crystal is 16.384 MHz +#define SYSCTL_OSC_MAIN 0x00000000 // Osc source is main osc +#define SYSCTL_OSC_INT 0x00000010 // Osc source is int. osc +#define SYSCTL_OSC_INT4 0x00000020 // Osc source is int. osc /4 +#define SYSCTL_OSC_INT30 0x00000030 // Osc source is int. 30 KHz +#define SYSCTL_OSC_EXT4_19 0x80000028 // Osc source is ext. 4.19 MHz +#define SYSCTL_OSC_EXT32 0x80000038 // Osc source is ext. 32 KHz +#define SYSCTL_INT_PIOSC_DIS 0x00000004 // Disable interal precision osc. +#define SYSCTL_INT_OSC_DIS 0x00000002 // Disable internal oscillator +#define SYSCTL_MAIN_OSC_DIS 0x00000001 // Disable main oscillator + +//***************************************************************************** +// +// Prototypes for the APIs. +// +//***************************************************************************** +extern unsigned long SysCtlSRAMSizeGet(void); +extern unsigned long SysCtlFlashSizeGet(void); +extern tBoolean SysCtlPinPresent(unsigned long ulPin); +extern tBoolean SysCtlPeripheralPresent(unsigned long ulPeripheral); +extern void SysCtlPeripheralReset(unsigned long ulPeripheral); +extern void SysCtlPeripheralEnable(unsigned long ulPeripheral); +extern void SysCtlPeripheralDisable(unsigned long ulPeripheral); +extern void SysCtlPeripheralSleepEnable(unsigned long ulPeripheral); +extern void SysCtlPeripheralSleepDisable(unsigned long ulPeripheral); +extern void SysCtlPeripheralDeepSleepEnable(unsigned long ulPeripheral); +extern void SysCtlPeripheralDeepSleepDisable(unsigned long ulPeripheral); +extern void SysCtlPeripheralClockGating(tBoolean bEnable); +extern void SysCtlIntRegister(void (*pfnHandler)(void)); +extern void SysCtlIntUnregister(void); +extern void SysCtlIntEnable(unsigned long ulInts); +extern void SysCtlIntDisable(unsigned long ulInts); +extern void SysCtlIntClear(unsigned long ulInts); +extern unsigned long SysCtlIntStatus(tBoolean bMasked); +extern void SysCtlLDOSet(unsigned long ulVoltage); +extern unsigned long SysCtlLDOGet(void); +extern void SysCtlLDOConfigSet(unsigned long ulConfig); +extern void SysCtlReset(void); +extern void SysCtlSleep(void); +extern void SysCtlDeepSleep(void); +extern unsigned long SysCtlResetCauseGet(void); +extern void SysCtlResetCauseClear(unsigned long ulCauses); +extern void SysCtlBrownOutConfigSet(unsigned long ulConfig, + unsigned long ulDelay); +extern void SysCtlDelay(unsigned long ulCount); +extern void SysCtlClockSet(unsigned long ulConfig); +extern unsigned long SysCtlClockGet(void); +extern void SysCtlPWMClockSet(unsigned long ulConfig); +extern unsigned long SysCtlPWMClockGet(void); +extern void SysCtlADCSpeedSet(unsigned long ulSpeed); +extern unsigned long SysCtlADCSpeedGet(void); +extern void SysCtlIOSCVerificationSet(tBoolean bEnable); +extern void SysCtlMOSCVerificationSet(tBoolean bEnable); +extern void SysCtlPLLVerificationSet(tBoolean bEnable); +extern void SysCtlClkVerificationClear(void); +extern void SysCtlGPIOAHBEnable(unsigned long ulGPIOPeripheral); +extern void SysCtlGPIOAHBDisable(unsigned long ulGPIOPeripheral); +extern void SysCtlUSBPLLEnable(void); +extern void SysCtlUSBPLLDisable(void); +extern unsigned long SysCtlI2SMClkSet(unsigned long ulInputClock, + unsigned long ulMClk); + +//***************************************************************************** +// +// Mark the end of the C bindings section for C++ compilers. +// +//***************************************************************************** +#ifdef __cplusplus +} +#endif + +#endif // __SYSCTL_H__ diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/systick.c b/bsp/lm3s_9b9x/Libraries/driverlib/systick.c new file mode 100644 index 0000000000000000000000000000000000000000..c2251b06aa3529de7e462f7aa59b3425471e591f --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/systick.c @@ -0,0 +1,259 @@ +//***************************************************************************** +// +// systick.c - Driver for the SysTick timer in NVIC. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +//***************************************************************************** +// +//! \addtogroup systick_api +//! @{ +// +//***************************************************************************** + +#include "inc/hw_ints.h" +#include "inc/hw_nvic.h" +#include "inc/hw_types.h" +#include "driverlib/debug.h" +#include "driverlib/interrupt.h" +#include "driverlib/systick.h" + +//***************************************************************************** +// +//! Enables the SysTick counter. +//! +//! This will start the SysTick counter. If an interrupt handler has been +//! registered, it will be called when the SysTick counter rolls over. +//! +//! \note Calling this function will cause the SysTick counter to (re)commence +//! counting from its current value. The counter is not automatically reloaded +//! with the period as specified in a previous call to SysTickPeriodSet(). If +//! an immediate reload is required, the \b NVIC_ST_CURRENT register must be +//! written to force this. Any write to this register clears the SysTick +//! counter to 0 and will cause a reload with the supplied period on the next +//! clock. +//! +//! \return None. +// +//***************************************************************************** +void +SysTickEnable(void) +{ + // + // Enable SysTick. + // + HWREG(NVIC_ST_CTRL) |= NVIC_ST_CTRL_CLK_SRC | NVIC_ST_CTRL_ENABLE; +} + +//***************************************************************************** +// +//! Disables the SysTick counter. +//! +//! This will stop the SysTick counter. If an interrupt handler has been +//! registered, it will no longer be called until SysTick is restarted. +//! +//! \return None. +// +//***************************************************************************** +void +SysTickDisable(void) +{ + // + // Disable SysTick. + // + HWREG(NVIC_ST_CTRL) &= ~(NVIC_ST_CTRL_ENABLE); +} + +//***************************************************************************** +// +//! Registers an interrupt handler for the SysTick interrupt. +//! +//! \param pfnHandler is a pointer to the function to be called when the +//! SysTick interrupt occurs. +//! +//! This sets the handler to be called when a SysTick interrupt occurs. +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +SysTickIntRegister(void (*pfnHandler)(void)) +{ + // + // Register the interrupt handler, returning an error if an error occurs. + // + IntRegister(FAULT_SYSTICK, pfnHandler); + + // + // Enable the SysTick interrupt. + // + HWREG(NVIC_ST_CTRL) |= NVIC_ST_CTRL_INTEN; +} + +//***************************************************************************** +// +//! Unregisters the interrupt handler for the SysTick interrupt. +//! +//! This function will clear the handler to be called when a SysTick interrupt +//! occurs. +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +SysTickIntUnregister(void) +{ + // + // Disable the SysTick interrupt. + // + HWREG(NVIC_ST_CTRL) &= ~(NVIC_ST_CTRL_INTEN); + + // + // Unregister the interrupt handler. + // + IntUnregister(FAULT_SYSTICK); +} + +//***************************************************************************** +// +//! Enables the SysTick interrupt. +//! +//! This function will enable the SysTick interrupt, allowing it to be +//! reflected to the processor. +//! +//! \note The SysTick interrupt handler does not need to clear the SysTick +//! interrupt source as this is done automatically by NVIC when the interrupt +//! handler is called. +//! +//! \return None. +// +//***************************************************************************** +void +SysTickIntEnable(void) +{ + // + // Enable the SysTick interrupt. + // + HWREG(NVIC_ST_CTRL) |= NVIC_ST_CTRL_INTEN; +} + +//***************************************************************************** +// +//! Disables the SysTick interrupt. +//! +//! This function will disable the SysTick interrupt, preventing it from being +//! reflected to the processor. +//! +//! \return None. +// +//***************************************************************************** +void +SysTickIntDisable(void) +{ + // + // Disable the SysTick interrupt. + // + HWREG(NVIC_ST_CTRL) &= ~(NVIC_ST_CTRL_INTEN); +} + +//***************************************************************************** +// +//! Sets the period of the SysTick counter. +//! +//! \param ulPeriod is the number of clock ticks in each period of the SysTick +//! counter; must be between 1 and 16,777,216, inclusive. +//! +//! This function sets the rate at which the SysTick counter wraps; this +//! equates to the number of processor clocks between interrupts. +//! +//! \note Calling this function does not cause the SysTick counter to reload +//! immediately. If an immediate reload is required, the \b NVIC_ST_CURRENT +//! register must be written. Any write to this register clears the SysTick +//! counter to 0 and will cause a reload with the \e ulPeriod supplied here on +//! the next clock after the SysTick is enabled. +//! +//! \return None. +// +//***************************************************************************** +void +SysTickPeriodSet(unsigned long ulPeriod) +{ + // + // Check the arguments. + // + ASSERT((ulPeriod > 0) && (ulPeriod <= 16777216)); + + // + // Set the period of the SysTick counter. + // + HWREG(NVIC_ST_RELOAD) = ulPeriod - 1; +} + +//***************************************************************************** +// +//! Gets the period of the SysTick counter. +//! +//! This function returns the rate at which the SysTick counter wraps; this +//! equates to the number of processor clocks between interrupts. +//! +//! \return Returns the period of the SysTick counter. +// +//***************************************************************************** +unsigned long +SysTickPeriodGet(void) +{ + // + // Return the period of the SysTick counter. + // + return(HWREG(NVIC_ST_RELOAD) + 1); +} + +//***************************************************************************** +// +//! Gets the current value of the SysTick counter. +//! +//! This function returns the current value of the SysTick counter; this will +//! be a value between the period - 1 and zero, inclusive. +//! +//! \return Returns the current value of the SysTick counter. +// +//***************************************************************************** +unsigned long +SysTickValueGet(void) +{ + // + // Return the current value of the SysTick counter. + // + return(HWREG(NVIC_ST_CURRENT)); +} + +//***************************************************************************** +// +// Close the Doxygen group. +//! @} +// +//***************************************************************************** diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/systick.h b/bsp/lm3s_9b9x/Libraries/driverlib/systick.h new file mode 100644 index 0000000000000000000000000000000000000000..94251df94b636826e253269642c18342dc2afe34 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/systick.h @@ -0,0 +1,63 @@ +//***************************************************************************** +// +// systick.h - Prototypes for the SysTick driver. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +#ifndef __SYSTICK_H__ +#define __SYSTICK_H__ + +//***************************************************************************** +// +// If building with a C++ compiler, make all of the definitions in this header +// have a C binding. +// +//***************************************************************************** +#ifdef __cplusplus +extern "C" +{ +#endif + +//***************************************************************************** +// +// Prototypes for the APIs. +// +//***************************************************************************** +extern void SysTickEnable(void); +extern void SysTickDisable(void); +extern void SysTickIntRegister(void (*pfnHandler)(void)); +extern void SysTickIntUnregister(void); +extern void SysTickIntEnable(void); +extern void SysTickIntDisable(void); +extern void SysTickPeriodSet(unsigned long ulPeriod); +extern unsigned long SysTickPeriodGet(void); +extern unsigned long SysTickValueGet(void); + +//***************************************************************************** +// +// Mark the end of the C bindings section for C++ compilers. +// +//***************************************************************************** +#ifdef __cplusplus +} +#endif + +#endif // __SYSTICK_H__ diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/timer.c b/bsp/lm3s_9b9x/Libraries/driverlib/timer.c new file mode 100644 index 0000000000000000000000000000000000000000..c1031488683c01a451986c9884fd42efbe5a617a --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/timer.c @@ -0,0 +1,1161 @@ +//***************************************************************************** +// +// timer.c - Driver for the timer module. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +//***************************************************************************** +// +//! \addtogroup timer_api +//! @{ +// +//***************************************************************************** + +#include "inc/hw_ints.h" +#include "inc/hw_memmap.h" +#include "inc/hw_timer.h" +#include "inc/hw_types.h" +#include "driverlib/debug.h" +#include "driverlib/interrupt.h" +#include "driverlib/timer.h" + +//***************************************************************************** +// +//! \internal +//! Checks a timer base address. +//! +//! \param ulBase is the base address of the timer module. +//! +//! This function determines if a timer module base address is valid. +//! +//! \return Returns \b true if the base address is valid and \b false +//! otherwise. +// +//***************************************************************************** +#ifdef DEBUG +static tBoolean +TimerBaseValid(unsigned long ulBase) +{ + return((ulBase == TIMER0_BASE) || (ulBase == TIMER1_BASE) || + (ulBase == TIMER2_BASE) || (ulBase == TIMER3_BASE)); +} +#endif + +//***************************************************************************** +// +//! Enables the timer(s). +//! +//! \param ulBase is the base address of the timer module. +//! \param ulTimer specifies the timer(s) to enable; must be one of \b TIMER_A, +//! \b TIMER_B, or \b TIMER_BOTH. +//! +//! This will enable operation of the timer module. The timer must be +//! configured before it is enabled. +//! +//! \return None. +// +//***************************************************************************** +void +TimerEnable(unsigned long ulBase, unsigned long ulTimer) +{ + // + // Check the arguments. + // + ASSERT(TimerBaseValid(ulBase)); + ASSERT((ulTimer == TIMER_A) || (ulTimer == TIMER_B) || + (ulTimer == TIMER_BOTH)); + + // + // Enable the timer(s) module. + // + HWREG(ulBase + TIMER_O_CTL) |= ulTimer & (TIMER_CTL_TAEN | TIMER_CTL_TBEN); +} + +//***************************************************************************** +// +//! Disables the timer(s). +//! +//! \param ulBase is the base address of the timer module. +//! \param ulTimer specifies the timer(s) to disable; must be one of +//! \b TIMER_A, \b TIMER_B, or \b TIMER_BOTH. +//! +//! This will disable operation of the timer module. +//! +//! \return None. +// +//***************************************************************************** +void +TimerDisable(unsigned long ulBase, unsigned long ulTimer) +{ + // + // Check the arguments. + // + ASSERT(TimerBaseValid(ulBase)); + ASSERT((ulTimer == TIMER_A) || (ulTimer == TIMER_B) || + (ulTimer == TIMER_BOTH)); + + // + // Disable the timer module. + // + HWREG(ulBase + TIMER_O_CTL) &= ~(ulTimer & + (TIMER_CTL_TAEN | TIMER_CTL_TBEN)); +} + +//***************************************************************************** +// +//! Configures the timer(s). +//! +//! \param ulBase is the base address of the timer module. +//! \param ulConfig is the configuration for the timer. +//! +//! This function configures the operating mode of the timer(s). The timer +//! module is disabled before being configured, and is left in the disabled +//! state. The configuration is specified in \e ulConfig as one of the +//! following values: +//! +//! - \b TIMER_CFG_32_BIT_OS - 32-bit one-shot timer +//! - \b TIMER_CFG_32_BIT_OS_UP - 32-bit one-shot timer that counts up instead +//! of down (not available on all parts) +//! - \b TIMER_CFG_32_BIT_PER - 32-bit periodic timer +//! - \b TIMER_CFG_32_BIT_PER_UP - 32-bit periodic timer that counts up instead +//! of down (not available on all parts) +//! - \b TIMER_CFG_32_RTC - 32-bit real time clock timer +//! - \b TIMER_CFG_16_BIT_PAIR - Two 16-bit timers +//! +//! When configured for a pair of 16-bit timers, each timer is separately +//! configured. The first timer is configured by setting \e ulConfig to +//! the result of a logical OR operation between one of the following values +//! and \e ulConfig: +//! +//! - \b TIMER_CFG_A_ONE_SHOT - 16-bit one-shot timer +//! - \b TIMER_CFG_A_ONE_SHOT_UP - 16-bit one-shot timer that counts up instead +//! of down (not available on all parts) +//! - \b TIMER_CFG_A_PERIODIC - 16-bit periodic timer +//! - \b TIMER_CFG_A_PERIODIC_UP - 16-bit periodic timer that counts up instead +//! of down (not available on all parts) +//! - \b TIMER_CFG_A_CAP_COUNT - 16-bit edge count capture +//! - \b TIMER_CFG_A_CAP_TIME - 16-bit edge time capture +//! - \b TIMER_CFG_A_PWM - 16-bit PWM output +//! +//! Similarly, the second timer is configured by setting \e ulConfig to +//! the result of a logical OR operation between one of the corresponding +//! \b TIMER_CFG_B_* values and \e ulConfig. +//! +//! \return None. +// +//***************************************************************************** +void +TimerConfigure(unsigned long ulBase, unsigned long ulConfig) +{ + // + // Check the arguments. + // + ASSERT(TimerBaseValid(ulBase)); + ASSERT((ulConfig == TIMER_CFG_32_BIT_OS) || + (ulConfig == TIMER_CFG_32_BIT_OS_UP) || + (ulConfig == TIMER_CFG_32_BIT_PER) || + (ulConfig == TIMER_CFG_32_BIT_PER_UP) || + (ulConfig == TIMER_CFG_32_RTC) || + ((ulConfig & 0xff000000) == TIMER_CFG_16_BIT_PAIR)); + ASSERT(((ulConfig & 0xff000000) != TIMER_CFG_16_BIT_PAIR) || + ((((ulConfig & 0x000000ff) == TIMER_CFG_A_ONE_SHOT) || + ((ulConfig & 0x000000ff) == TIMER_CFG_A_ONE_SHOT_UP) || + ((ulConfig & 0x000000ff) == TIMER_CFG_A_PERIODIC) || + ((ulConfig & 0x000000ff) == TIMER_CFG_A_PERIODIC_UP) || + ((ulConfig & 0x000000ff) == TIMER_CFG_A_CAP_COUNT) || + ((ulConfig & 0x000000ff) == TIMER_CFG_A_CAP_TIME) || + ((ulConfig & 0x000000ff) == TIMER_CFG_A_PWM)) && + (((ulConfig & 0x0000ff00) == TIMER_CFG_B_ONE_SHOT) || + ((ulConfig & 0x0000ff00) == TIMER_CFG_B_ONE_SHOT_UP) || + ((ulConfig & 0x0000ff00) == TIMER_CFG_B_PERIODIC) || + ((ulConfig & 0x0000ff00) == TIMER_CFG_B_PERIODIC_UP) || + ((ulConfig & 0x0000ff00) == TIMER_CFG_B_CAP_COUNT) || + ((ulConfig & 0x0000ff00) == TIMER_CFG_B_CAP_TIME) || + ((ulConfig & 0x0000ff00) == TIMER_CFG_B_PWM)))); + + // + // Disable the timers. + // + HWREG(ulBase + TIMER_O_CTL) &= ~(TIMER_CTL_TAEN | TIMER_CTL_TBEN); + + // + // Set the global timer configuration. + // + HWREG(ulBase + TIMER_O_CFG) = ulConfig >> 24; + + // + // Set the configuration of the A and B timers. Note that the B timer + // configuration is ignored by the hardware in 32-bit modes. + // + HWREG(ulBase + TIMER_O_TAMR) = ulConfig & 255; + HWREG(ulBase + TIMER_O_TBMR) = (ulConfig >> 8) & 255; +} + +//***************************************************************************** +// +//! Controls the output level. +//! +//! \param ulBase is the base address of the timer module. +//! \param ulTimer specifies the timer(s) to adjust; must be one of \b TIMER_A, +//! \b TIMER_B, or \b TIMER_BOTH. +//! \param bInvert specifies the output level. +//! +//! This function sets the PWM output level for the specified timer. If the +//! \e bInvert parameter is \b true, then the timer's output will be made +//! active low; otherwise, it will be made active high. +//! +//! \return None. +// +//***************************************************************************** +void +TimerControlLevel(unsigned long ulBase, unsigned long ulTimer, + tBoolean bInvert) +{ + // + // Check the arguments. + // + ASSERT(TimerBaseValid(ulBase)); + ASSERT((ulTimer == TIMER_A) || (ulTimer == TIMER_B) || + (ulTimer == TIMER_BOTH)); + + // + // Set the output levels as requested. + // + ulTimer &= TIMER_CTL_TAPWML | TIMER_CTL_TBPWML; + HWREG(ulBase + TIMER_O_CTL) = (bInvert ? + (HWREG(ulBase + TIMER_O_CTL) | ulTimer) : + (HWREG(ulBase + TIMER_O_CTL) & ~(ulTimer))); +} + +//***************************************************************************** +// +//! Enables or disables the trigger output. +//! +//! \param ulBase is the base address of the timer module. +//! \param ulTimer specifies the timer to adjust; must be one of \b TIMER_A, +//! \b TIMER_B, or \b TIMER_BOTH. +//! \param bEnable specifies the desired trigger state. +//! +//! This function controls the trigger output for the specified timer. If the +//! \e bEnable parameter is \b true, then the timer's output trigger is +//! enabled; otherwise it is disabled. +//! +//! \return None. +// +//***************************************************************************** +void +TimerControlTrigger(unsigned long ulBase, unsigned long ulTimer, + tBoolean bEnable) +{ + // + // Check the arguments. + // + ASSERT(TimerBaseValid(ulBase)); + ASSERT((ulTimer == TIMER_A) || (ulTimer == TIMER_B) || + (ulTimer == TIMER_BOTH)); + + // + // Set the trigger output as requested. + // + ulTimer &= TIMER_CTL_TAOTE | TIMER_CTL_TBOTE; + HWREG(ulBase + TIMER_O_CTL) = (bEnable ? + (HWREG(ulBase + TIMER_O_CTL) | ulTimer) : + (HWREG(ulBase + TIMER_O_CTL) & ~(ulTimer))); +} + +//***************************************************************************** +// +//! Controls the event type. +//! +//! \param ulBase is the base address of the timer module. +//! \param ulTimer specifies the timer(s) to be adjusted; must be one of +//! \b TIMER_A, \b TIMER_B, or \b TIMER_BOTH. +//! \param ulEvent specifies the type of event; must be one of +//! \b TIMER_EVENT_POS_EDGE, \b TIMER_EVENT_NEG_EDGE, or +//! \b TIMER_EVENT_BOTH_EDGES. +//! +//! This function sets the signal edge(s) that will trigger the timer when in +//! capture mode. +//! +//! \return None. +// +//***************************************************************************** +void +TimerControlEvent(unsigned long ulBase, unsigned long ulTimer, + unsigned long ulEvent) +{ + // + // Check the arguments. + // + ASSERT(TimerBaseValid(ulBase)); + ASSERT((ulTimer == TIMER_A) || (ulTimer == TIMER_B) || + (ulTimer == TIMER_BOTH)); + + // + // Set the event type. + // + ulEvent &= ulTimer & (TIMER_CTL_TAEVENT_M | TIMER_CTL_TBEVENT_M); + HWREG(ulBase + TIMER_O_CTL) = ((HWREG(ulBase + TIMER_O_CTL) & + ~(TIMER_CTL_TAEVENT_M | + TIMER_CTL_TBEVENT_M)) | ulEvent); +} + +//***************************************************************************** +// +//! Controls the stall handling. +//! +//! \param ulBase is the base address of the timer module. +//! \param ulTimer specifies the timer(s) to be adjusted; must be one of +//! \b TIMER_A, \b TIMER_B, or \b TIMER_BOTH. +//! \param bStall specifies the response to a stall signal. +//! +//! This function controls the stall response for the specified timer. If the +//! \e bStall parameter is \b true, then the timer will stop counting if the +//! processor enters debug mode; otherwise the timer will keep running while in +//! debug mode. +//! +//! \return None. +// +//***************************************************************************** +void +TimerControlStall(unsigned long ulBase, unsigned long ulTimer, + tBoolean bStall) +{ + // + // Check the arguments. + // + ASSERT(TimerBaseValid(ulBase)); + ASSERT((ulTimer == TIMER_A) || (ulTimer == TIMER_B) || + (ulTimer == TIMER_BOTH)); + + // + // Set the stall mode. + // + ulTimer &= TIMER_CTL_TASTALL | TIMER_CTL_TBSTALL; + HWREG(ulBase + TIMER_O_CTL) = (bStall ? + (HWREG(ulBase + TIMER_O_CTL) | ulTimer) : + (HWREG(ulBase + TIMER_O_CTL) & ~(ulTimer))); +} + +//***************************************************************************** +// +//! Controls the wait on trigger handling. +//! +//! \param ulBase is the base address of the timer module. +//! \param ulTimer specifies the timer(s) to be adjusted; must be one of +//! \b TIMER_A, \b TIMER_B, or \b TIMER_BOTH. +//! \param bWait specifies if the timer should wait for a trigger input. +//! +//! This function controls whether or not a timer waits for a trigger input to +//! start counting. When enabled, the previous timer in the trigger chain must +//! count to its timeout in order for this timer to start counting. Refer to +//! the part's data sheet for a description of the trigger chain. +//! +//! \note This functionality is not available on all parts. +//! +//! \return None. +// +//***************************************************************************** +void +TimerControlWaitOnTrigger(unsigned long ulBase, unsigned long ulTimer, + tBoolean bWait) +{ + // + // Check the arguments. + // + ASSERT(TimerBaseValid(ulBase)); + ASSERT((ulTimer == TIMER_A) || (ulTimer == TIMER_B) || + (ulTimer == TIMER_BOTH)); + + // + // Set the wait on trigger mode for timer A. + // + if((ulTimer & TIMER_A) != 0) + { + if(bWait) + { + HWREG(ulBase + TIMER_O_TAMR) |= TIMER_TAMR_TAWOT; + } + else + { + HWREG(ulBase + TIMER_O_TAMR) &= ~(TIMER_TAMR_TAWOT); + } + } + + // + // Set the wait on trigger mode for timer A. + // + if((ulTimer & TIMER_B) != 0) + { + if(bWait) + { + HWREG(ulBase + TIMER_O_TBMR) |= TIMER_TBMR_TBWOT; + } + else + { + HWREG(ulBase + TIMER_O_TBMR) &= ~(TIMER_TBMR_TBWOT); + } + } +} + +//***************************************************************************** +// +//! Enable RTC counting. +//! +//! \param ulBase is the base address of the timer module. +//! +//! This function causes the timer to start counting when in RTC mode. If not +//! configured for RTC mode, this will do nothing. +//! +//! \return None. +// +//***************************************************************************** +void +TimerRTCEnable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(TimerBaseValid(ulBase)); + + // + // Enable RTC counting. + // + HWREG(ulBase + TIMER_O_CTL) |= TIMER_CTL_RTCEN; +} + +//***************************************************************************** +// +//! Disable RTC counting. +//! +//! \param ulBase is the base address of the timer module. +//! +//! This function causes the timer to stop counting when in RTC mode. +//! +//! \return None. +// +//***************************************************************************** +void +TimerRTCDisable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(TimerBaseValid(ulBase)); + + // + // Disable RTC counting. + // + HWREG(ulBase + TIMER_O_CTL) &= ~(TIMER_CTL_RTCEN); +} + +//***************************************************************************** +// +//! Set the timer prescale value. +//! +//! \param ulBase is the base address of the timer module. +//! \param ulTimer specifies the timer(s) to adjust; must be one of \b TIMER_A, +//! \b TIMER_B, or \b TIMER_BOTH. +//! \param ulValue is the timer prescale value; must be between 0 and 255, +//! inclusive. +//! +//! This function sets the value of the input clock prescaler. The prescaler +//! is only operational when in 16-bit mode and is used to extend the range of +//! the 16-bit timer modes. +//! +//! \return None. +// +//***************************************************************************** +void +TimerPrescaleSet(unsigned long ulBase, unsigned long ulTimer, + unsigned long ulValue) +{ + // + // Check the arguments. + // + ASSERT(TimerBaseValid(ulBase)); + ASSERT((ulTimer == TIMER_A) || (ulTimer == TIMER_B) || + (ulTimer == TIMER_BOTH)); + ASSERT(ulValue < 256); + + // + // Set the timer A prescaler if requested. + // + if(ulTimer & TIMER_A) + { + HWREG(ulBase + TIMER_O_TAPR) = ulValue; + } + + // + // Set the timer B prescaler if requested. + // + if(ulTimer & TIMER_B) + { + HWREG(ulBase + TIMER_O_TBPR) = ulValue; + } +} + +//***************************************************************************** +// +//! Get the timer prescale value. +//! +//! \param ulBase is the base address of the timer module. +//! \param ulTimer specifies the timer; must be one of \b TIMER_A or +//! \b TIMER_B. +//! +//! This function gets the value of the input clock prescaler. The prescaler +//! is only operational when in 16-bit mode and is used to extend the range of +//! the 16-bit timer modes. +//! +//! \return The value of the timer prescaler. +// +//***************************************************************************** +unsigned long +TimerPrescaleGet(unsigned long ulBase, unsigned long ulTimer) +{ + // + // Check the arguments. + // + ASSERT(TimerBaseValid(ulBase)); + ASSERT((ulTimer == TIMER_A) || (ulTimer == TIMER_B) || + (ulTimer == TIMER_BOTH)); + + // + // Return the appropriate prescale value. + // + return((ulTimer == TIMER_A) ? HWREG(ulBase + TIMER_O_TAPR) : + HWREG(ulBase + TIMER_O_TBPR)); +} + +//***************************************************************************** +// +//! Set the timer prescale match value. +//! +//! \param ulBase is the base address of the timer module. +//! \param ulTimer specifies the timer(s) to adjust; must be one of \b TIMER_A, +//! \b TIMER_B, or \b TIMER_BOTH. +//! \param ulValue is the timer prescale match value; must be between 0 and +//! 255, inclusive. +//! +//! This function sets the value of the input clock prescaler match value. +//! When in a 16-bit mode that uses the counter match and the prescaler, the +//! prescale match effectively extends the range of the counter to 24-bits. +//! +//! \note This functionality is not available on all parts. +//! +//! \return None. +// +//***************************************************************************** +void +TimerPrescaleMatchSet(unsigned long ulBase, unsigned long ulTimer, + unsigned long ulValue) +{ + // + // Check the arguments. + // + ASSERT(TimerBaseValid(ulBase)); + ASSERT((ulTimer == TIMER_A) || (ulTimer == TIMER_B) || + (ulTimer == TIMER_BOTH)); + ASSERT(ulValue < 256); + + // + // Set the timer A prescale match if requested. + // + if(ulTimer & TIMER_A) + { + HWREG(ulBase + TIMER_O_TAPMR) = ulValue; + } + + // + // Set the timer B prescale match if requested. + // + if(ulTimer & TIMER_B) + { + HWREG(ulBase + TIMER_O_TBPMR) = ulValue; + } +} + +//***************************************************************************** +// +//! Get the timer prescale match value. +//! +//! \param ulBase is the base address of the timer module. +//! \param ulTimer specifies the timer; must be one of \b TIMER_A or +//! \b TIMER_B. +//! +//! This function gets the value of the input clock prescaler match value. +//! When in a 16-bit mode that uses the counter match and prescaler, the +//! prescale match effectively extends the range of the counter to 24-bits. +//! +//! \note This functionality is not available on all parts. +//! +//! \return The value of the timer prescale match. +// +//***************************************************************************** +unsigned long +TimerPrescaleMatchGet(unsigned long ulBase, unsigned long ulTimer) +{ + // + // Check the arguments. + // + ASSERT(TimerBaseValid(ulBase)); + ASSERT((ulTimer == TIMER_A) || (ulTimer == TIMER_B) || + (ulTimer == TIMER_BOTH)); + + // + // Return the appropriate prescale match value. + // + return((ulTimer == TIMER_A) ? HWREG(ulBase + TIMER_O_TAPMR) : + HWREG(ulBase + TIMER_O_TBPMR)); +} + +//***************************************************************************** +// +//! Sets the timer load value. +//! +//! \param ulBase is the base address of the timer module. +//! \param ulTimer specifies the timer(s) to adjust; must be one of \b TIMER_A, +//! \b TIMER_B, or \b TIMER_BOTH. Only \b TIMER_A should be used when the +//! timer is configured for 32-bit operation. +//! \param ulValue is the load value. +//! +//! This function sets the timer load value; if the timer is running then the +//! value will be immediately loaded into the timer. +//! +//! \return None. +// +//***************************************************************************** +void +TimerLoadSet(unsigned long ulBase, unsigned long ulTimer, + unsigned long ulValue) +{ + // + // Check the arguments. + // + ASSERT(TimerBaseValid(ulBase)); + ASSERT((ulTimer == TIMER_A) || (ulTimer == TIMER_B) || + (ulTimer == TIMER_BOTH)); + + // + // Set the timer A load value if requested. + // + if(ulTimer & TIMER_A) + { + HWREG(ulBase + TIMER_O_TAILR) = ulValue; + } + + // + // Set the timer B load value if requested. + // + if(ulTimer & TIMER_B) + { + HWREG(ulBase + TIMER_O_TBILR) = ulValue; + } +} + +//***************************************************************************** +// +//! Gets the timer load value. +//! +//! \param ulBase is the base address of the timer module. +//! \param ulTimer specifies the timer; must be one of \b TIMER_A or +//! \b TIMER_B. Only \b TIMER_A should be used when the timer is configured +//! for 32-bit operation. +//! +//! This function gets the currently programmed interval load value for the +//! specified timer. +//! +//! \return Returns the load value for the timer. +// +//***************************************************************************** +unsigned long +TimerLoadGet(unsigned long ulBase, unsigned long ulTimer) +{ + // + // Check the arguments. + // + ASSERT(TimerBaseValid(ulBase)); + ASSERT((ulTimer == TIMER_A) || (ulTimer == TIMER_B)); + + // + // Return the appropriate load value. + // + return((ulTimer == TIMER_A) ? HWREG(ulBase + TIMER_O_TAILR) : + HWREG(ulBase + TIMER_O_TBILR)); +} + +//***************************************************************************** +// +//! Gets the current timer value. +//! +//! \param ulBase is the base address of the timer module. +//! \param ulTimer specifies the timer; must be one of \b TIMER_A or +//! \b TIMER_B. Only \b TIMER_A should be used when the timer is configured +//! for 32-bit operation. +//! +//! This function reads the current value of the specified timer. +//! +//! \return Returns the current value of the timer. +// +//***************************************************************************** +unsigned long +TimerValueGet(unsigned long ulBase, unsigned long ulTimer) +{ + // + // Check the arguments. + // + ASSERT(TimerBaseValid(ulBase)); + ASSERT((ulTimer == TIMER_A) || (ulTimer == TIMER_B)); + + // + // Return the appropriate timer value. + // + return((ulTimer == TIMER_A) ? HWREG(ulBase + TIMER_O_TAR) : + HWREG(ulBase + TIMER_O_TBR)); +} + +//***************************************************************************** +// +//! Sets the timer match value. +//! +//! \param ulBase is the base address of the timer module. +//! \param ulTimer specifies the timer(s) to adjust; must be one of \b TIMER_A, +//! \b TIMER_B, or \b TIMER_BOTH. Only \b TIMER_A should be used when the +//! timer is configured for 32-bit operation. +//! \param ulValue is the match value. +//! +//! This function sets the match value for a timer. This is used in capture +//! count mode to determine when to interrupt the processor and in PWM mode to +//! determine the duty cycle of the output signal. +//! +//! \return None. +// +//***************************************************************************** +void +TimerMatchSet(unsigned long ulBase, unsigned long ulTimer, + unsigned long ulValue) +{ + // + // Check the arguments. + // + ASSERT(TimerBaseValid(ulBase)); + ASSERT((ulTimer == TIMER_A) || (ulTimer == TIMER_B) || + (ulTimer == TIMER_BOTH)); + + // + // Set the timer A match value if requested. + // + if(ulTimer & TIMER_A) + { + HWREG(ulBase + TIMER_O_TAMATCHR) = ulValue; + } + + // + // Set the timer B match value if requested. + // + if(ulTimer & TIMER_B) + { + HWREG(ulBase + TIMER_O_TBMATCHR) = ulValue; + } +} + +//***************************************************************************** +// +//! Gets the timer match value. +//! +//! \param ulBase is the base address of the timer module. +//! \param ulTimer specifies the timer; must be one of \b TIMER_A or +//! \b TIMER_B. Only \b TIMER_A should be used when the timer is configured +//! for 32-bit operation. +//! +//! This function gets the match value for the specified timer. +//! +//! \return Returns the match value for the timer. +// +//***************************************************************************** +unsigned long +TimerMatchGet(unsigned long ulBase, unsigned long ulTimer) +{ + // + // Check the arguments. + // + ASSERT(TimerBaseValid(ulBase)); + ASSERT((ulTimer == TIMER_A) || (ulTimer == TIMER_B)); + + // + // Return the appropriate match value. + // + return((ulTimer == TIMER_A) ? HWREG(ulBase + TIMER_O_TAMATCHR) : + HWREG(ulBase + TIMER_O_TBMATCHR)); +} + +//***************************************************************************** +// +//! Registers an interrupt handler for the timer interrupt. +//! +//! \param ulBase is the base address of the timer module. +//! \param ulTimer specifies the timer(s); must be one of \b TIMER_A, +//! \b TIMER_B, or \b TIMER_BOTH. +//! \param pfnHandler is a pointer to the function to be called when the timer +//! interrupt occurs. +//! +//! This sets the handler to be called when a timer interrupt occurs. This +//! will enable the global interrupt in the interrupt controller; specific +//! timer interrupts must be enabled via TimerIntEnable(). It is the interrupt +//! handler's responsibility to clear the interrupt source via TimerIntClear(). +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +TimerIntRegister(unsigned long ulBase, unsigned long ulTimer, + void (*pfnHandler)(void)) +{ + // + // Check the arguments. + // + ASSERT(TimerBaseValid(ulBase)); + ASSERT((ulTimer == TIMER_A) || (ulTimer == TIMER_B) || + (ulTimer == TIMER_BOTH)); + + // + // Get the interrupt number for this timer module. + // + ulBase = ((ulBase == TIMER0_BASE) ? INT_TIMER0A : + ((ulBase == TIMER1_BASE) ? INT_TIMER1A : + ((ulBase == TIMER2_BASE) ? INT_TIMER2A : INT_TIMER3A))); + + // + // Register an interrupt handler for timer A if requested. + // + if(ulTimer & TIMER_A) + { + // + // Register the interrupt handler. + // + IntRegister(ulBase, pfnHandler); + + // + // Enable the interrupt. + // + IntEnable(ulBase); + } + + // + // Register an interrupt handler for timer B if requested. + // + if(ulTimer & TIMER_B) + { + // + // Register the interrupt handler. + // + IntRegister(ulBase + 1, pfnHandler); + + // + // Enable the interrupt. + // + IntEnable(ulBase + 1); + } +} + +//***************************************************************************** +// +//! Unregisters an interrupt handler for the timer interrupt. +//! +//! \param ulBase is the base address of the timer module. +//! \param ulTimer specifies the timer(s); must be one of \b TIMER_A, +//! \b TIMER_B, or \b TIMER_BOTH. +//! +//! This function will clear the handler to be called when a timer interrupt +//! occurs. This will also mask off the interrupt in the interrupt controller +//! so that the interrupt handler no longer is called. +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +TimerIntUnregister(unsigned long ulBase, unsigned long ulTimer) +{ + // + // Check the arguments. + // + ASSERT(TimerBaseValid(ulBase)); + ASSERT((ulTimer == TIMER_A) || (ulTimer == TIMER_B) || + (ulTimer == TIMER_BOTH)); + + // + // Get the interrupt number for this timer module. + // + ulBase = ((ulBase == TIMER0_BASE) ? INT_TIMER0A : + ((ulBase == TIMER1_BASE) ? INT_TIMER1A : + ((ulBase == TIMER2_BASE) ? INT_TIMER2A : INT_TIMER3A))); + + // + // Unregister the interrupt handler for timer A if requested. + // + if(ulTimer & TIMER_A) + { + // + // Disable the interrupt. + // + IntDisable(ulBase); + + // + // Unregister the interrupt handler. + // + IntUnregister(ulBase); + } + + // + // Unregister the interrupt handler for timer B if requested. + // + if(ulTimer & TIMER_B) + { + // + // Disable the interrupt. + // + IntDisable(ulBase + 1); + + // + // Unregister the interrupt handler. + // + IntUnregister(ulBase + 1); + } +} + +//***************************************************************************** +// +//! Enables individual timer interrupt sources. +//! +//! \param ulBase is the base address of the timer module. +//! \param ulIntFlags is the bit mask of the interrupt sources to be enabled. +//! +//! Enables the indicated timer interrupt sources. Only the sources that are +//! enabled can be reflected to the processor interrupt; disabled sources have +//! no effect on the processor. +//! +//! The \e ulIntFlags parameter must be the logical OR of any combination of +//! the following: +//! +//! - \b TIMER_CAPB_EVENT - Capture B event interrupt +//! - \b TIMER_CAPB_MATCH - Capture B match interrupt +//! - \b TIMER_TIMB_TIMEOUT - Timer B timeout interrupt +//! - \b TIMER_RTC_MATCH - RTC interrupt mask +//! - \b TIMER_CAPA_EVENT - Capture A event interrupt +//! - \b TIMER_CAPA_MATCH - Capture A match interrupt +//! - \b TIMER_TIMA_TIMEOUT - Timer A timeout interrupt +//! +//! \return None. +// +//***************************************************************************** +void +TimerIntEnable(unsigned long ulBase, unsigned long ulIntFlags) +{ + // + // Check the arguments. + // + ASSERT(TimerBaseValid(ulBase)); + + // + // Enable the specified interrupts. + // + HWREG(ulBase + TIMER_O_IMR) |= ulIntFlags; +} + +//***************************************************************************** +// +//! Disables individual timer interrupt sources. +//! +//! \param ulBase is the base address of the timer module. +//! \param ulIntFlags is the bit mask of the interrupt sources to be disabled. +//! +//! Disables the indicated timer interrupt sources. Only the sources that are +//! enabled can be reflected to the processor interrupt; disabled sources have +//! no effect on the processor. +//! +//! The \e ulIntFlags parameter has the same definition as the \e ulIntFlags +//! parameter to TimerIntEnable(). +//! +//! \return None. +// +//***************************************************************************** +void +TimerIntDisable(unsigned long ulBase, unsigned long ulIntFlags) +{ + // + // Check the arguments. + // + ASSERT(TimerBaseValid(ulBase)); + + // + // Disable the specified interrupts. + // + HWREG(ulBase + TIMER_O_IMR) &= ~(ulIntFlags); +} + +//***************************************************************************** +// +//! Gets the current interrupt status. +//! +//! \param ulBase is the base address of the timer module. +//! \param bMasked is false if the raw interrupt status is required and true if +//! the masked interrupt status is required. +//! +//! This returns the interrupt status for the timer module. Either the raw +//! interrupt status or the status of interrupts that are allowed to reflect to +//! the processor can be returned. +//! +//! \return The current interrupt status, enumerated as a bit field of +//! values described in TimerIntEnable(). +// +//***************************************************************************** +unsigned long +TimerIntStatus(unsigned long ulBase, tBoolean bMasked) +{ + // + // Check the arguments. + // + ASSERT(TimerBaseValid(ulBase)); + + // + // Return either the interrupt status or the raw interrupt status as + // requested. + // + return(bMasked ? HWREG(ulBase + TIMER_O_MIS) : + HWREG(ulBase + TIMER_O_RIS)); +} + +//***************************************************************************** +// +//! Clears timer interrupt sources. +//! +//! \param ulBase is the base address of the timer module. +//! \param ulIntFlags is a bit mask of the interrupt sources to be cleared. +//! +//! The specified timer interrupt sources are cleared, so that they no longer +//! assert. This must be done in the interrupt handler to keep it from being +//! called again immediately upon exit. +//! +//! The \e ulIntFlags parameter has the same definition as the \e ulIntFlags +//! parameter to TimerIntEnable(). +//! +//! \note Since there is a write buffer in the Cortex-M3 processor, it may take +//! several clock cycles before the interrupt source is actually cleared. +//! Therefore, it is recommended that the interrupt source be cleared early in +//! the interrupt handler (as opposed to the very last action) to avoid +//! returning from the interrupt handler before the interrupt source is +//! actually cleared. Failure to do so may result in the interrupt handler +//! being immediately reentered (since NVIC still sees the interrupt source +//! asserted). +//! +//! \return None. +// +//***************************************************************************** +void +TimerIntClear(unsigned long ulBase, unsigned long ulIntFlags) +{ + // + // Check the arguments. + // + ASSERT(TimerBaseValid(ulBase)); + + // + // Clear the requested interrupt sources. + // + HWREG(ulBase + TIMER_O_ICR) = ulIntFlags; +} + +//***************************************************************************** +// +// Puts the timer into its reset state. +// +// \param ulBase is the base address of the timer module. +// +// The specified timer is disabled, and all its interrupts are disabled, +// cleared, and unregistered. Then the timer registers are set to their reset +// value. +// +// \return None. +// +//***************************************************************************** +#ifndef DEPRECATED +void +TimerQuiesce(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(TimerBaseValid(ulBase)); + + // + // Disable the timer. + // + HWREG(ulBase + TIMER_O_CTL) = TIMER_RV_CTL; + + // + // Disable all the timer interrupts. + // + HWREG(ulBase + TIMER_O_IMR) = TIMER_RV_IMR; + + // + // Clear all the timer interrupts. + // + HWREG(ulBase + TIMER_O_ICR) = 0xFFFFFFFF; + + // + // Unregister the interrupt handler. This also disables interrupts to the + // core. + // + TimerIntUnregister(ulBase, TIMER_BOTH); + + // + // Set all the registers to their reset value. + // + HWREG(ulBase + TIMER_O_CFG) = TIMER_RV_CFG; + HWREG(ulBase + TIMER_O_TAMR) = TIMER_RV_TAMR; + HWREG(ulBase + TIMER_O_TBMR) = TIMER_RV_TBMR; + HWREG(ulBase + TIMER_O_RIS) = TIMER_RV_RIS; + HWREG(ulBase + TIMER_O_MIS) = TIMER_RV_MIS; + HWREG(ulBase + TIMER_O_TAILR) = TIMER_RV_TAILR; + HWREG(ulBase + TIMER_O_TBILR) = TIMER_RV_TBILR; + HWREG(ulBase + TIMER_O_TAMATCHR) = TIMER_RV_TAMATCHR; + HWREG(ulBase + TIMER_O_TBMATCHR) = TIMER_RV_TBMATCHR; + HWREG(ulBase + TIMER_O_TAPR) = TIMER_RV_TAPR; + HWREG(ulBase + TIMER_O_TBPR) = TIMER_RV_TBPR; + HWREG(ulBase + TIMER_O_TAPMR) = TIMER_RV_TAPMR; + HWREG(ulBase + TIMER_O_TBPMR) = TIMER_RV_TBPMR; + HWREG(ulBase + TIMER_O_TAR) = TIMER_RV_TAR; + HWREG(ulBase + TIMER_O_TBR) = TIMER_RV_TBR; +} +#endif // DEPRECATED + +//***************************************************************************** +// +// Close the Doxygen group. +//! @} +// +//***************************************************************************** diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/timer.h b/bsp/lm3s_9b9x/Libraries/driverlib/timer.h new file mode 100644 index 0000000000000000000000000000000000000000..eb76f42094bb99bf613155bb2283e70fba73a6a9 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/timer.h @@ -0,0 +1,165 @@ +//***************************************************************************** +// +// timer.h - Prototypes for the timer module +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +#ifndef __TIMER_H__ +#define __TIMER_H__ + +//***************************************************************************** +// +// If building with a C++ compiler, make all of the definitions in this header +// have a C binding. +// +//***************************************************************************** +#ifdef __cplusplus +extern "C" +{ +#endif + +//***************************************************************************** +// +// Values that can be passed to TimerConfigure as the ulConfig parameter. +// +//***************************************************************************** +#define TIMER_CFG_32_BIT_OS 0x00000001 // 32-bit one-shot timer +#define TIMER_CFG_32_BIT_OS_UP 0x00000011 // 32-bit one-shot up-count timer +#define TIMER_CFG_32_BIT_PER 0x00000002 // 32-bit periodic timer +#define TIMER_CFG_32_BIT_PER_UP 0x00000012 // 32-bit periodic up-count timer +#define TIMER_CFG_32_RTC 0x01000000 // 32-bit RTC timer +#define TIMER_CFG_16_BIT_PAIR 0x04000000 // Two 16-bit timers +#define TIMER_CFG_A_ONE_SHOT 0x00000001 // Timer A one-shot timer +#define TIMER_CFG_A_ONE_SHOT_UP 0x00000011 // Timer A one-shot up-count timer +#define TIMER_CFG_A_PERIODIC 0x00000002 // Timer A periodic timer +#define TIMER_CFG_A_PERIODIC_UP 0x00000012 // Timer A periodic up-count timer +#define TIMER_CFG_A_CAP_COUNT 0x00000003 // Timer A event counter +#define TIMER_CFG_A_CAP_TIME 0x00000007 // Timer A event timer +#define TIMER_CFG_A_PWM 0x0000000A // Timer A PWM output +#define TIMER_CFG_B_ONE_SHOT 0x00000100 // Timer B one-shot timer +#define TIMER_CFG_B_ONE_SHOT_UP 0x00001100 // Timer B one-shot up-count timer +#define TIMER_CFG_B_PERIODIC 0x00000200 // Timer B periodic timer +#define TIMER_CFG_B_PERIODIC_UP 0x00001200 // Timer B periodic up-count timer +#define TIMER_CFG_B_CAP_COUNT 0x00000300 // Timer B event counter +#define TIMER_CFG_B_CAP_TIME 0x00000700 // Timer B event timer +#define TIMER_CFG_B_PWM 0x00000A00 // Timer B PWM output + +//***************************************************************************** +// +// Values that can be passed to TimerIntEnable, TimerIntDisable, and +// TimerIntClear as the ulIntFlags parameter, and returned from TimerIntStatus. +// +//***************************************************************************** +#define TIMER_TIMB_MATCH 0x00000800 // TimerB match interrupt +#define TIMER_CAPB_EVENT 0x00000400 // CaptureB event interrupt +#define TIMER_CAPB_MATCH 0x00000200 // CaptureB match interrupt +#define TIMER_TIMB_TIMEOUT 0x00000100 // TimerB time out interrupt +#define TIMER_TIMA_MATCH 0x00000010 // TimerA match interrupt +#define TIMER_RTC_MATCH 0x00000008 // RTC interrupt mask +#define TIMER_CAPA_EVENT 0x00000004 // CaptureA event interrupt +#define TIMER_CAPA_MATCH 0x00000002 // CaptureA match interrupt +#define TIMER_TIMA_TIMEOUT 0x00000001 // TimerA time out interrupt + +//***************************************************************************** +// +// Values that can be passed to TimerControlEvent as the ulEvent parameter. +// +//***************************************************************************** +#define TIMER_EVENT_POS_EDGE 0x00000000 // Count positive edges +#define TIMER_EVENT_NEG_EDGE 0x00000404 // Count negative edges +#define TIMER_EVENT_BOTH_EDGES 0x00000C0C // Count both edges + +//***************************************************************************** +// +// Values that can be passed to most of the timer APIs as the ulTimer +// parameter. +// +//***************************************************************************** +#define TIMER_A 0x000000ff // Timer A +#define TIMER_B 0x0000ff00 // Timer B +#define TIMER_BOTH 0x0000ffff // Timer Both + +//***************************************************************************** +// +// Prototypes for the APIs. +// +//***************************************************************************** +extern void TimerEnable(unsigned long ulBase, unsigned long ulTimer); +extern void TimerDisable(unsigned long ulBase, unsigned long ulTimer); +extern void TimerConfigure(unsigned long ulBase, unsigned long ulConfig); +extern void TimerControlLevel(unsigned long ulBase, unsigned long ulTimer, + tBoolean bInvert); +extern void TimerControlTrigger(unsigned long ulBase, unsigned long ulTimer, + tBoolean bEnable); +extern void TimerControlEvent(unsigned long ulBase, unsigned long ulTimer, + unsigned long ulEvent); +extern void TimerControlStall(unsigned long ulBase, unsigned long ulTimer, + tBoolean bStall); +extern void TimerControlWaitOnTrigger(unsigned long ulBase, + unsigned long ulTimer, + tBoolean bWait); +extern void TimerRTCEnable(unsigned long ulBase); +extern void TimerRTCDisable(unsigned long ulBase); +extern void TimerPrescaleSet(unsigned long ulBase, unsigned long ulTimer, + unsigned long ulValue); +extern unsigned long TimerPrescaleGet(unsigned long ulBase, + unsigned long ulTimer); +extern void TimerPrescaleMatchSet(unsigned long ulBase, unsigned long ulTimer, + unsigned long ulValue); +extern unsigned long TimerPrescaleMatchGet(unsigned long ulBase, + unsigned long ulTimer); +extern void TimerLoadSet(unsigned long ulBase, unsigned long ulTimer, + unsigned long ulValue); +extern unsigned long TimerLoadGet(unsigned long ulBase, unsigned long ulTimer); +extern unsigned long TimerValueGet(unsigned long ulBase, + unsigned long ulTimer); +extern void TimerMatchSet(unsigned long ulBase, unsigned long ulTimer, + unsigned long ulValue); +extern unsigned long TimerMatchGet(unsigned long ulBase, + unsigned long ulTimer); +extern void TimerIntRegister(unsigned long ulBase, unsigned long ulTimer, + void (*pfnHandler)(void)); +extern void TimerIntUnregister(unsigned long ulBase, unsigned long ulTimer); +extern void TimerIntEnable(unsigned long ulBase, unsigned long ulIntFlags); +extern void TimerIntDisable(unsigned long ulBase, unsigned long ulIntFlags); +extern unsigned long TimerIntStatus(unsigned long ulBase, tBoolean bMasked); +extern void TimerIntClear(unsigned long ulBase, unsigned long ulIntFlags); + +//***************************************************************************** +// +// TimerQuiesce() has been deprecated. SysCtlPeripheralReset() should be used +// instead to return the timer to its reset state. +// +//***************************************************************************** +#ifndef DEPRECATED +extern void TimerQuiesce(unsigned long ulBase); +#endif + +//***************************************************************************** +// +// Mark the end of the C bindings section for C++ compilers. +// +//***************************************************************************** +#ifdef __cplusplus +} +#endif + +#endif // __TIMER_H__ diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/uart.c b/bsp/lm3s_9b9x/Libraries/driverlib/uart.c new file mode 100644 index 0000000000000000000000000000000000000000..b03e4d6a06185d3279bb5a4409e46a44c0b2a0a7 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/uart.c @@ -0,0 +1,1617 @@ +//***************************************************************************** +// +// uart.c - Driver for the UART. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +//***************************************************************************** +// +//! \addtogroup uart_api +//! @{ +// +//***************************************************************************** + +#include "inc/hw_ints.h" +#include "inc/hw_memmap.h" +#include "inc/hw_sysctl.h" +#include "inc/hw_types.h" +#include "inc/hw_uart.h" +#include "driverlib/debug.h" +#include "driverlib/interrupt.h" +#include "driverlib/uart.h" + +//***************************************************************************** +// +// The system clock divider defining the maximum baud rate supported by the +// UART. +// +//***************************************************************************** +#define UART_CLK_DIVIDER ((CLASS_IS_SANDSTORM || \ + (CLASS_IS_FURY && REVISION_IS_A2) || \ + (CLASS_IS_DUSTDEVIL && REVISION_IS_A0)) ? \ + 16 : 8) + +//***************************************************************************** +// +//! \internal +//! Checks a UART base address. +//! +//! \param ulBase is the base address of the UART port. +//! +//! This function determines if a UART port base address is valid. +//! +//! \return Returns \b true if the base address is valid and \b false +//! otherwise. +// +//***************************************************************************** +#ifdef DEBUG +static tBoolean +UARTBaseValid(unsigned long ulBase) +{ + return((ulBase == UART0_BASE) || (ulBase == UART1_BASE) || + (ulBase == UART2_BASE)); +} +#endif + +//***************************************************************************** +// +//! Sets the type of parity. +//! +//! \param ulBase is the base address of the UART port. +//! \param ulParity specifies the type of parity to use. +//! +//! Sets the type of parity to use for transmitting and expect when receiving. +//! The \e ulParity parameter must be one of \b UART_CONFIG_PAR_NONE, +//! \b UART_CONFIG_PAR_EVEN, \b UART_CONFIG_PAR_ODD, \b UART_CONFIG_PAR_ONE, +//! or \b UART_CONFIG_PAR_ZERO. The last two allow direct control of the +//! parity bit; it is always either one or zero based on the mode. +//! +//! \return None. +// +//***************************************************************************** +void +UARTParityModeSet(unsigned long ulBase, unsigned long ulParity) +{ + // + // Check the arguments. + // + ASSERT(UARTBaseValid(ulBase)); + ASSERT((ulParity == UART_CONFIG_PAR_NONE) || + (ulParity == UART_CONFIG_PAR_EVEN) || + (ulParity == UART_CONFIG_PAR_ODD) || + (ulParity == UART_CONFIG_PAR_ONE) || + (ulParity == UART_CONFIG_PAR_ZERO)); + + // + // Set the parity mode. + // + HWREG(ulBase + UART_O_LCRH) = ((HWREG(ulBase + UART_O_LCRH) & + ~(UART_LCRH_SPS | UART_LCRH_EPS | + UART_LCRH_PEN)) | ulParity); +} + +//***************************************************************************** +// +//! Gets the type of parity currently being used. +//! +//! \param ulBase is the base address of the UART port. +//! +//! This function gets the type of parity used for transmitting data and +//! expected when receiving data. +//! +//! \return Returns the current parity settings, specified as one of +//! \b UART_CONFIG_PAR_NONE, \b UART_CONFIG_PAR_EVEN, \b UART_CONFIG_PAR_ODD, +//! \b UART_CONFIG_PAR_ONE, or \b UART_CONFIG_PAR_ZERO. +// +//***************************************************************************** +unsigned long +UARTParityModeGet(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(UARTBaseValid(ulBase)); + + // + // Return the current parity setting. + // + return(HWREG(ulBase + UART_O_LCRH) & + (UART_LCRH_SPS | UART_LCRH_EPS | UART_LCRH_PEN)); +} + +//***************************************************************************** +// +//! Sets the FIFO level at which interrupts are generated. +//! +//! \param ulBase is the base address of the UART port. +//! \param ulTxLevel is the transmit FIFO interrupt level, specified as one of +//! \b UART_FIFO_TX1_8, \b UART_FIFO_TX2_8, \b UART_FIFO_TX4_8, +//! \b UART_FIFO_TX6_8, or \b UART_FIFO_TX7_8. +//! \param ulRxLevel is the receive FIFO interrupt level, specified as one of +//! \b UART_FIFO_RX1_8, \b UART_FIFO_RX2_8, \b UART_FIFO_RX4_8, +//! \b UART_FIFO_RX6_8, or \b UART_FIFO_RX7_8. +//! +//! This function sets the FIFO level at which transmit and receive interrupts +//! are generated. +//! +//! \return None. +// +//***************************************************************************** +void +UARTFIFOLevelSet(unsigned long ulBase, unsigned long ulTxLevel, + unsigned long ulRxLevel) +{ + // + // Check the arguments. + // + ASSERT(UARTBaseValid(ulBase)); + ASSERT((ulTxLevel == UART_FIFO_TX1_8) || + (ulTxLevel == UART_FIFO_TX2_8) || + (ulTxLevel == UART_FIFO_TX4_8) || + (ulTxLevel == UART_FIFO_TX6_8) || + (ulTxLevel == UART_FIFO_TX7_8)); + ASSERT((ulRxLevel == UART_FIFO_RX1_8) || + (ulRxLevel == UART_FIFO_RX2_8) || + (ulRxLevel == UART_FIFO_RX4_8) || + (ulRxLevel == UART_FIFO_RX6_8) || + (ulRxLevel == UART_FIFO_RX7_8)); + + // + // Set the FIFO interrupt levels. + // + HWREG(ulBase + UART_O_IFLS) = ulTxLevel | ulRxLevel; +} + +//***************************************************************************** +// +//! Gets the FIFO level at which interrupts are generated. +//! +//! \param ulBase is the base address of the UART port. +//! \param pulTxLevel is a pointer to storage for the transmit FIFO level, +//! returned as one of \b UART_FIFO_TX1_8, \b UART_FIFO_TX2_8, +//! \b UART_FIFO_TX4_8, \b UART_FIFO_TX6_8, or \b UART_FIFO_TX7_8. +//! \param pulRxLevel is a pointer to storage for the receive FIFO level, +//! returned as one of \b UART_FIFO_RX1_8, \b UART_FIFO_RX2_8, +//! \b UART_FIFO_RX4_8, \b UART_FIFO_RX6_8, or \b UART_FIFO_RX7_8. +//! +//! This function gets the FIFO level at which transmit and receive interrupts +//! are xogenerated. +//! +//! \return None. +// +//***************************************************************************** +void +UARTFIFOLevelGet(unsigned long ulBase, unsigned long *pulTxLevel, + unsigned long *pulRxLevel) +{ + unsigned long ulTemp; + + // + // Check the arguments. + // + ASSERT(UARTBaseValid(ulBase)); + + // + // Read the FIFO level register. + // + ulTemp = HWREG(ulBase + UART_O_IFLS); + + // + // Extract the transmit and receive FIFO levels. + // + *pulTxLevel = ulTemp & UART_IFLS_TX_M; + *pulRxLevel = ulTemp & UART_IFLS_RX_M; +} + +//***************************************************************************** +// +//! Sets the configuration of a UART. +//! +//! \param ulBase is the base address of the UART port. +//! \param ulUARTClk is the rate of the clock supplied to the UART module. +//! \param ulBaud is the desired baud rate. +//! \param ulConfig is the data format for the port (number of data bits, +//! number of stop bits, and parity). +//! +//! This function configures the UART for operation in the specified data +//! format. The baud rate is provided in the \e ulBaud parameter and the data +//! format in the \e ulConfig parameter. +//! +//! The \e ulConfig parameter is the logical OR of three values: the number of +//! data bits, the number of stop bits, and the parity. \b UART_CONFIG_WLEN_8, +//! \b UART_CONFIG_WLEN_7, \b UART_CONFIG_WLEN_6, and \b UART_CONFIG_WLEN_5 +//! select from eight to five data bits per byte (respectively). +//! \b UART_CONFIG_STOP_ONE and \b UART_CONFIG_STOP_TWO select one or two stop +//! bits (respectively). \b UART_CONFIG_PAR_NONE, \b UART_CONFIG_PAR_EVEN, +//! \b UART_CONFIG_PAR_ODD, \b UART_CONFIG_PAR_ONE, and \b UART_CONFIG_PAR_ZERO +//! select the parity mode (no parity bit, even parity bit, odd parity bit, +//! parity bit always one, and parity bit always zero, respectively). +//! +//! The peripheral clock will be the same as the processor clock. This will be +//! the value returned by SysCtlClockGet(), or it can be explicitly hard coded +//! if it is constant and known (to save the code/execution overhead of a call +//! to SysCtlClockGet()). +//! +//! This function replaces the original UARTConfigSet() API and performs the +//! same actions. A macro is provided in uart.h to map the original +//! API to this API. +//! +//! \return None. +// +//***************************************************************************** +void +UARTConfigSetExpClk(unsigned long ulBase, unsigned long ulUARTClk, + unsigned long ulBaud, unsigned long ulConfig) +{ + unsigned long ulDiv; + + // + // Check the arguments. + // + ASSERT(UARTBaseValid(ulBase)); + ASSERT(ulBaud != 0); + ASSERT(ulUARTClk >= (ulBaud * UART_CLK_DIVIDER)); + + // + // Stop the UART. + // + UARTDisable(ulBase); + + // + // Is the required baud rate greater than the maximum rate supported + // without the use of high speed mode? + // + if((ulBaud * 16) > ulUARTClk) + { + // + // Enable high speed mode. + // + HWREG(ulBase + UART_O_CTL) |= UART_CTL_HSE; + + // + // Half the supplied baud rate to compensate for enabling high speed + // mode. This allows the following code to be common to both cases. + // + ulBaud /= 2; + } + else + { + // + // Disable high speed mode. + // + HWREG(ulBase + UART_O_CTL) &= ~(UART_CTL_HSE); + } + + // + // Compute the fractional baud rate divider. + // + ulDiv = (((ulUARTClk * 8) / ulBaud) + 1) / 2; + + // + // Set the baud rate. + // + HWREG(ulBase + UART_O_IBRD) = ulDiv / 64; + HWREG(ulBase + UART_O_FBRD) = ulDiv % 64; + + // + // Set parity, data length, and number of stop bits. + // + HWREG(ulBase + UART_O_LCRH) = ulConfig; + + // + // Clear the flags register. + // + HWREG(ulBase + UART_O_FR) = 0; + + // + // Start the UART. + // + UARTEnable(ulBase); +} + +//***************************************************************************** +// +//! Gets the current configuration of a UART. +//! +//! \param ulBase is the base address of the UART port. +//! \param ulUARTClk is the rate of the clock supplied to the UART module. +//! \param pulBaud is a pointer to storage for the baud rate. +//! \param pulConfig is a pointer to storage for the data format. +//! +//! The baud rate and data format for the UART is determined, given an +//! explicitly provided peripheral clock (hence the ExpClk suffix). The +//! returned baud rate is the actual baud rate; it may not be the exact baud +//! rate requested or an ``official'' baud rate. The data format returned in +//! \e pulConfig is enumerated the same as the \e ulConfig parameter of +//! UARTConfigSetExpClk(). +//! +//! The peripheral clock will be the same as the processor clock. This will be +//! the value returned by SysCtlClockGet(), or it can be explicitly hard coded +//! if it is constant and known (to save the code/execution overhead of a call +//! to SysCtlClockGet()). +//! +//! This function replaces the original UARTConfigGet() API and performs the +//! same actions. A macro is provided in uart.h to map the original +//! API to this API. +//! +//! \return None. +// +//***************************************************************************** +void +UARTConfigGetExpClk(unsigned long ulBase, unsigned long ulUARTClk, + unsigned long *pulBaud, unsigned long *pulConfig) +{ + unsigned long ulInt, ulFrac; + + // + // Check the arguments. + // + ASSERT(UARTBaseValid(ulBase)); + + // + // Compute the baud rate. + // + ulInt = HWREG(ulBase + UART_O_IBRD); + ulFrac = HWREG(ulBase + UART_O_FBRD); + *pulBaud = (ulUARTClk * 4) / ((64 * ulInt) + ulFrac); + + // + // See if high speed mode enabled. + // + if(HWREG(ulBase + UART_O_CTL) & UART_CTL_HSE) + { + // + // High speed mode is enabled so the actual baud rate is actually + // double what was just calculated. + // + *pulBaud *= 2; + } + + // + // Get the parity, data length, and number of stop bits. + // + *pulConfig = (HWREG(ulBase + UART_O_LCRH) & + (UART_LCRH_SPS | UART_LCRH_WLEN_M | UART_LCRH_STP2 | + UART_LCRH_EPS | UART_LCRH_PEN)); +} + +//***************************************************************************** +// +//! Enables transmitting and receiving. +//! +//! \param ulBase is the base address of the UART port. +//! +//! Sets the UARTEN, TXE, and RXE bits, and enables the transmit and receive +//! FIFOs. +//! +//! \return None. +// +//***************************************************************************** +void +UARTEnable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(UARTBaseValid(ulBase)); + + // + // Enable the FIFO. + // + HWREG(ulBase + UART_O_LCRH) |= UART_LCRH_FEN; + + // + // Enable RX, TX, and the UART. + // + HWREG(ulBase + UART_O_CTL) |= (UART_CTL_UARTEN | UART_CTL_TXE | + UART_CTL_RXE); +} + +//***************************************************************************** +// +//! Disables transmitting and receiving. +//! +//! \param ulBase is the base address of the UART port. +//! +//! Clears the UARTEN, TXE, and RXE bits, then waits for the end of +//! transmission of the current character, and flushes the transmit FIFO. +//! +//! \return None. +// +//***************************************************************************** +void +UARTDisable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(UARTBaseValid(ulBase)); + + // + // Wait for end of TX. + // + while(HWREG(ulBase + UART_O_FR) & UART_FR_BUSY) + { + } + + // + // Disable the FIFO. + // + HWREG(ulBase + UART_O_LCRH) &= ~(UART_LCRH_FEN); + + // + // Disable the UART. + // + HWREG(ulBase + UART_O_CTL) &= ~(UART_CTL_UARTEN | UART_CTL_TXE | + UART_CTL_RXE); +} + +//***************************************************************************** +// +//! Enables the transmit and receive FIFOs. +//! +//! \param ulBase is the base address of the UART port. +//! +//! This functions enables the transmit and receive FIFOs in the UART. +//! +//! \return None. +// +//***************************************************************************** +void +UARTFIFOEnable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(UARTBaseValid(ulBase)); + + // + // Enable the FIFO. + // + HWREG(ulBase + UART_O_LCRH) |= UART_LCRH_FEN; +} + +//***************************************************************************** +// +//! Disables the transmit and receive FIFOs. +//! +//! \param ulBase is the base address of the UART port. +//! +//! This functions disables the transmit and receive FIFOs in the UART. +//! +//! \return None. +// +//***************************************************************************** +void +UARTFIFODisable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(UARTBaseValid(ulBase)); + + // + // Disable the FIFO. + // + HWREG(ulBase + UART_O_LCRH) &= ~(UART_LCRH_FEN); +} + +//***************************************************************************** +// +//! Enables SIR (IrDA) mode on the specified UART. +//! +//! \param ulBase is the base address of the UART port. +//! \param bLowPower indicates if SIR Low Power Mode is to be used. +//! +//! Enables the SIREN control bit for IrDA mode on the UART. If the +//! \e bLowPower flag is set, then SIRLP bit will also be set. +//! +//! \note SIR (IrDA) operation is not supported on Sandstorm-class devices. +//! +//! \return None. +// +//***************************************************************************** +void +UARTEnableSIR(unsigned long ulBase, tBoolean bLowPower) +{ + // + // Check the arguments. + // + ASSERT(UARTBaseValid(ulBase)); + + // + // Enable SIR and SIRLP (if appropriate). + // + if(bLowPower) + { + HWREG(ulBase + UART_O_CTL) |= (UART_CTL_SIREN | UART_CTL_SIRLP); + } + else + { + HWREG(ulBase + UART_O_CTL) |= (UART_CTL_SIREN); + } +} + +//***************************************************************************** +// +//! Disables SIR (IrDA) mode on the specified UART. +//! +//! \param ulBase is the base address of the UART port. +//! +//! Clears the SIREN (IrDA) and SIRLP (Low Power) bits. +//! +//! \note SIR (IrDA) operation is not supported on Sandstorm-class devices. +//! +//! \return None. +// +//***************************************************************************** +void +UARTDisableSIR(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(UARTBaseValid(ulBase)); + + // + // Disable SIR and SIRLP (if appropriate). + // + HWREG(ulBase + UART_O_CTL) &= ~(UART_CTL_SIREN | UART_CTL_SIRLP); +} + +//***************************************************************************** +// +//! Enables ISO 7816 smart card mode on the specified UART. +//! +//! \param ulBase is the base address of the UART port. +//! +//! Enables the SMART control bit for ISO 7816 smart card mode on the UART. +//! This call also sets 8 bit word length and even parity as required by ISO +//! 7816. +//! +//! \note The availability of ISO 7816 smart card mode varies with the +//! Stellaris part and UART in use. Please consult the datasheet for the part +//! you are using to determine whether this support is available. +//! +//! \return None. +// +//***************************************************************************** +void +UARTSmartCardEnable(unsigned long ulBase) +{ + unsigned long ulVal; + + // + // Check the arguments. + // + ASSERT(!CLASS_IS_SANDSTORM && !CLASS_IS_FURY && !CLASS_IS_DUSTDEVIL); + ASSERT((ulBase == UART0_BASE) || (ulBase == UART1_BASE) || + (ulBase == UART2_BASE)); + + // + // Set 8 bit word length, even parity, 2 stop bits (even though the STP2 + // bit is ignored when in smartcard mode, this lets the caller read back + // the actual setting in use). + // + ulVal = HWREG(ulBase + UART_O_LCRH); + ulVal &= ~(UART_LCRH_SPS | UART_LCRH_EPS | UART_LCRH_PEN | + UART_LCRH_WLEN_M); + ulVal |= UART_LCRH_WLEN_8 | UART_LCRH_PEN | UART_LCRH_EPS | UART_LCRH_STP2; + HWREG(ulBase + UART_O_LCRH) = ulVal; + + // + // Enable SMART mode. + // + HWREG(ulBase + UART_O_CTL) |= UART_CTL_SMART; +} + +//***************************************************************************** +// +//! Disables ISO 7816 smart card mode on the specified UART. +//! +//! \param ulBase is the base address of the UART port. +//! +//! Clears the SMART (ISO 7816 smart card) bits in the UART control register. +//! +//! \note The availability of ISO 7816 smart card mode varies with the +//! Stellaris part and UART in use. Please consult the datasheet for the part +//! you are using to determine whether this support is available. +//! +//! \return None. +// +//***************************************************************************** +void +UARTSmartCardDisable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(!CLASS_IS_SANDSTORM && !CLASS_IS_FURY && !CLASS_IS_DUSTDEVIL); + ASSERT((ulBase == UART0_BASE) || (ulBase == UART1_BASE) || + (ulBase == UART2_BASE)); + + // + // Disable the SMART bit. + // + HWREG(ulBase + UART_O_CTL) &= ~UART_CTL_SMART; +} + +//***************************************************************************** +// +//! Sets the states of the DTR and/or RTS modem control signals. +//! +//! \param ulBase is the base address of the UART port. +//! \param ulControl is a bit-mapped flag indicating which modem control bits +//! should be set. +//! +//! Sets the states of the DTR or RTS modem handshake outputs from the UART. +//! +//! The \e ulControl parameter is the logical OR of any of the following: +//! +//! - \b UART_OUTPUT_DTR - The Modem Control DTR signal +//! - \b UART_OUTPUT_RTS - The Modem Control RTS signal +//! +//! \note The availability of hardware modem handshake signals varies with the +//! Stellaris part and UART in use. Please consult the datasheet for the part +//! you are using to determine whether this support is available. +//! +//! \return None. +// +//***************************************************************************** +void +UARTModemControlSet(unsigned long ulBase, unsigned long ulControl) +{ + unsigned long ulTemp; + + // + // Check the arguments. + // + ASSERT(!CLASS_IS_SANDSTORM && !CLASS_IS_FURY && !CLASS_IS_DUSTDEVIL); + ASSERT(ulBase == UART1_BASE); + ASSERT((ulControl & ~(UART_OUTPUT_RTS | UART_OUTPUT_DTR)) == 0); + + // + // Set the appropriate modem control output bits. + // + ulTemp = HWREG(ulBase + UART_O_CTL); + ulTemp |= (ulControl & (UART_OUTPUT_RTS | UART_OUTPUT_DTR)); + HWREG(ulBase + UART_O_CTL) = ulTemp; +} + +//***************************************************************************** +// +//! Clears the states of the DTR and/or RTS modem control signals. +//! +//! \param ulBase is the base address of the UART port. +//! \param ulControl is a bit-mapped flag indicating which modem control bits +//! should be set. +//! +//! Clears the states of the DTR or RTS modem handshake outputs from the UART. +//! +//! The \e ulControl parameter is the logical OR of any of the following: +//! +//! - \b UART_OUTPUT_DTR - The Modem Control DTR signal +//! - \b UART_OUTPUT_RTS - The Modem Control RTS signal +//! +//! \note The availability of hardware modem handshake signals varies with the +//! Stellaris part and UART in use. Please consult the datasheet for the part +//! you are using to determine whether this support is available. +//! +//! \return None. +// +//***************************************************************************** +void +UARTModemControlClear(unsigned long ulBase, unsigned long ulControl) +{ + unsigned long ulTemp; + + // + // Check the arguments. + // + ASSERT(!CLASS_IS_SANDSTORM && !CLASS_IS_FURY && !CLASS_IS_DUSTDEVIL); + ASSERT(ulBase == UART1_BASE); + ASSERT((ulControl & ~(UART_OUTPUT_RTS | UART_OUTPUT_DTR)) == 0); + + // + // Set the appropriate modem control output bits. + // + ulTemp = HWREG(ulBase + UART_O_CTL); + ulTemp &= ~(ulControl & (UART_OUTPUT_RTS | UART_OUTPUT_DTR)); + HWREG(ulBase + UART_O_CTL) = ulTemp; +} + +//***************************************************************************** +// +//! Gets the states of the DTR and RTS modem control signals. +//! +//! \param ulBase is the base address of the UART port. +//! +//! Returns the current states of each of the two UART modem control signals, +//! DTR and RTS. +//! +//! \note The availability of hardware modem handshake signals varies with the +//! Stellaris part and UART in use. Please consult the datasheet for the part +//! you are using to determine whether this support is available. +//! +//! \return Returns the states of the handshake output signals. This will be a +//! logical logical OR combination of values \b UART_OUTPUT_RTS and +//! \b UART_OUTPUT_DTR where the presence of each flag indicates that the +//! associated signal is asserted. +// +//***************************************************************************** +unsigned long +UARTModemControlGet(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(!CLASS_IS_SANDSTORM && !CLASS_IS_FURY && !CLASS_IS_DUSTDEVIL); + ASSERT(ulBase == UART1_BASE); + + return(HWREG(ulBase + UART_O_CTL) & (UART_OUTPUT_RTS | UART_OUTPUT_DTR)); +} + +//***************************************************************************** +// +//! Gets the states of the RI, DCD, DSR and CTS modem status signals. +//! +//! \param ulBase is the base address of the UART port. +//! +//! Returns the current states of each of the four UART modem status signals, +//! RI, DCD, DSR and CTS. +//! +//! \note The availability of hardware modem handshake signals varies with the +//! Stellaris part and UART in use. Please consult the datasheet for the part +//! you are using to determine whether this support is available. +//! +//! \return Returns the states of the handshake output signals. This will be a +//! logical logical OR combination of values \b UART_INPUT_RI, \b +//! UART_INPUT_DCD, \b UART_INPUT_CTS and \b UART_INPUT_DSR where the +//! presence of each flag indicates that the associated signal is asserted. +// +//***************************************************************************** +unsigned long +UARTModemStatusGet(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(!CLASS_IS_SANDSTORM && !CLASS_IS_FURY && !CLASS_IS_DUSTDEVIL); + ASSERT(ulBase == UART1_BASE); + + return(HWREG(ulBase + UART_O_FR) & (UART_INPUT_RI | UART_INPUT_DCD | + UART_INPUT_CTS | UART_INPUT_DSR)); +} + +//***************************************************************************** +// +//! Sets the UART hardware flow control mode to be used. +//! +//! \param ulBase is the base address of the UART port. +//! \param ulMode indicates the flow control modes to be used. This is a +//! logical OR combination of values \b UART_FLOWCONTROL_TX and \b +//! UART_FLOWCONTROL_RX to enable hardware transmit (CTS) and receive (RTS) +//! flow control or \b UART_FLOWCONTROL_NONE to disable hardware flow control. +//! +//! Sets the required hardware flow control modes. If \e ulMode contains +//! flag \b UART_FLOWCONTROL_TX, data is only transmitted if the incoming CTS +//! signal is asserted. If \e ulMode contains flag \b UART_FLOWCONTROL_RX, +//! the RTS output is controlled by the hardware and is asserted only when +//! there is space available in the receive FIFO. If no hardware flow control +//! is required, UART_FLOWCONTROL_NONE should be passed. +//! +//! \note The availability of hardware flow control varies with the Stellaris +//! part and UART in use. Please consult the datasheet for the part you are +//! using to determine whether this support is available. +//! +//! \return None. +// +//***************************************************************************** +void +UARTFlowControlSet(unsigned long ulBase, unsigned long ulMode) +{ + // + // Check the arguments. + // + ASSERT(!CLASS_IS_SANDSTORM && !CLASS_IS_FURY && !CLASS_IS_DUSTDEVIL); + ASSERT((ulBase == UART0_BASE) || (ulBase == UART1_BASE) || + (ulBase == UART2_BASE)); + ASSERT((ulMode & ~(UART_FLOWCONTROL_TX | UART_FLOWCONTROL_RX)) == 0); + + // + // Set the flow control mode as requested. + // + HWREG(ulBase + UART_O_CTL) = ((HWREG(ulBase + UART_O_CTL) & + ~(UART_FLOWCONTROL_TX | + UART_FLOWCONTROL_RX)) | ulMode); +} + +//***************************************************************************** +// +//! Returns the UART hardware flow control mode currently in use. +//! +//! \param ulBase is the base address of the UART port. +//! +//! Returns the current hardware flow control mode. +//! +//! \note The availability of hardware flow control varies with the Stellaris +//! part and UART in use. Please consult the datasheet for the part you are +//! using to determine whether this support is available. +//! +//! \return Returns the current flow control mode in use. This is a +//! logical OR combination of values \b UART_FLOWCONTROL_TX if transmit +//! (CTS) flow control is enabled and \b UART_FLOWCONTROL_RX if receive (RTS) +//! flow control is in use. If hardware flow control is disabled, \b +//! UART_FLOWCONTROL_NONE will be returned. +// +//***************************************************************************** +unsigned long +UARTFlowControlGet(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(!CLASS_IS_SANDSTORM && !CLASS_IS_FURY && !CLASS_IS_DUSTDEVIL); + ASSERT((ulBase == UART0_BASE) || (ulBase == UART1_BASE) || + (ulBase == UART2_BASE)); + + return(HWREG(ulBase + UART_O_CTL) & (UART_FLOWCONTROL_TX | + UART_FLOWCONTROL_RX)); +} + +//***************************************************************************** +// +//! Sets the operating mode for the UART transmit interrupt. +//! +//! \param ulBase is the base address of the UART port. +//! \param ulMode is the operating mode for the transmit interrupt. It may be +//! \b UART_TXINT_MODE_EOT to trigger interrupts when the transmitter is idle +//! or \b UART_TXINT_MODE_FIFO to trigger based on the current transmit FIFO +//! level. +//! +//! This function allows the mode of the UART transmit interrupt to be set. By +//! default, the transmit interrupt is asserted when the FIFO level falls past +//! a threshold set via a call to UARTFIFOLevelSet(). Alternatively, if this +//! function is called with \e ulMode set to \b UART_TXINT_MODE_EOT, the +//! transmit interrupt will only be asserted once the transmitter is completely +//! idle - the transmit FIFO is empty and all bits, including any stop bits, +//! have cleared the transmitter. +//! +//! \note The availability of end-of-transmission mode varies with the +//! Stellaris part in use. Please consult the datasheet for the part you are +//! using to determine whether this support is available. +//! +//! \return None. +// +//***************************************************************************** +void +UARTTxIntModeSet(unsigned long ulBase, unsigned long ulMode) +{ + // + // Check the arguments. + // + ASSERT((ulBase == UART0_BASE) || (ulBase == UART1_BASE) || + (ulBase == UART2_BASE)); + ASSERT((ulMode == UART_TXINT_MODE_EOT) || + (ulMode == UART_TXINT_MODE_FIFO)); + + // + // Set or clear the EOT bit of the UART control register as appropriate. + // + HWREG(ulBase + UART_O_CTL) = ((HWREG(ulBase + UART_O_CTL) & + ~(UART_TXINT_MODE_EOT | + UART_TXINT_MODE_FIFO)) | ulMode); +} + +//***************************************************************************** +// +//! Returns the current operating mode for the UART transmit interrupt. +//! +//! \param ulBase is the base address of the UART port. +//! +//! This function returns the current operating mode for the UART transmit +//! interrupt. The return value will be \b UART_TXINT_MODE_EOT if the +//! transmit interrupt is currently set to be asserted once the transmitter is +//! completely idle - the transmit FIFO is empty and all bits, including any +//! stop bits, have cleared the transmitter. The return value will be \b +//! UART_TXINT_MODE_FIFO if the interrupt is set to be asserted based upon the +//! level of the transmit FIFO. +//! +//! \note The availability of end-of-transmission mode varies with the +//! Stellaris part in use. Please consult the datasheet for the part you are +//! using to determine whether this support is available. +//! +//! \return Returns \b UART_TXINT_MODE_FIFO or \b UART_TXINT_MODE_EOT. +// +//***************************************************************************** +unsigned long +UARTTxIntModeGet(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == UART0_BASE) || (ulBase == UART1_BASE) || + (ulBase == UART2_BASE)); + + // + // Return the current transmit interrupt mode. + // + return(HWREG(ulBase + UART_O_CTL) & (UART_TXINT_MODE_EOT | + UART_TXINT_MODE_FIFO)); +} + +//***************************************************************************** +// +//! Determines if there are any characters in the receive FIFO. +//! +//! \param ulBase is the base address of the UART port. +//! +//! This function returns a flag indicating whether or not there is data +//! available in the receive FIFO. +//! +//! \return Returns \b true if there is data in the receive FIFO or \b false +//! if there is no data in the receive FIFO. +// +//***************************************************************************** +tBoolean +UARTCharsAvail(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(UARTBaseValid(ulBase)); + + // + // Return the availability of characters. + // + return((HWREG(ulBase + UART_O_FR) & UART_FR_RXFE) ? false : true); +} + +//***************************************************************************** +// +//! Determines if there is any space in the transmit FIFO. +//! +//! \param ulBase is the base address of the UART port. +//! +//! This function returns a flag indicating whether or not there is space +//! available in the transmit FIFO. +//! +//! \return Returns \b true if there is space available in the transmit FIFO +//! or \b false if there is no space available in the transmit FIFO. +// +//***************************************************************************** +tBoolean +UARTSpaceAvail(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(UARTBaseValid(ulBase)); + + // + // Return the availability of space. + // + return((HWREG(ulBase + UART_O_FR) & UART_FR_TXFF) ? false : true); +} + +//***************************************************************************** +// +//! Receives a character from the specified port. +//! +//! \param ulBase is the base address of the UART port. +//! +//! Gets a character from the receive FIFO for the specified port. +//! +//! This function replaces the original UARTCharNonBlockingGet() API and +//! performs the same actions. A macro is provided in uart.h to map +//! the original API to this API. +//! +//! \return Returns the character read from the specified port, cast as a +//! \e long. A \b -1 is returned if there are no characters present in the +//! receive FIFO. The UARTCharsAvail() function should be called before +//! attempting to call this function. +// +//***************************************************************************** +long +UARTCharGetNonBlocking(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(UARTBaseValid(ulBase)); + + // + // See if there are any characters in the receive FIFO. + // + if(!(HWREG(ulBase + UART_O_FR) & UART_FR_RXFE)) + { + // + // Read and return the next character. + // + return(HWREG(ulBase + UART_O_DR)); + } + else + { + // + // There are no characters, so return a failure. + // + return(-1); + } +} + +//***************************************************************************** +// +//! Waits for a character from the specified port. +//! +//! \param ulBase is the base address of the UART port. +//! +//! Gets a character from the receive FIFO for the specified port. If there +//! are no characters available, this function waits until a character is +//! received before returning. +//! +//! \return Returns the character read from the specified port, cast as a +//! \e long. +// +//***************************************************************************** +long +UARTCharGet(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(UARTBaseValid(ulBase)); + + // + // Wait until a char is available. + // + while(HWREG(ulBase + UART_O_FR) & UART_FR_RXFE) + { + } + + // + // Now get the char. + // + return(HWREG(ulBase + UART_O_DR)); +} + +//***************************************************************************** +// +//! Sends a character to the specified port. +//! +//! \param ulBase is the base address of the UART port. +//! \param ucData is the character to be transmitted. +//! +//! Writes the character \e ucData to the transmit FIFO for the specified port. +//! This function does not block, so if there is no space available, then a +//! \b false is returned, and the application must retry the function later. +//! +//! This function replaces the original UARTCharNonBlockingPut() API and +//! performs the same actions. A macro is provided in uart.h to map +//! the original API to this API. +//! +//! \return Returns \b true if the character was successfully placed in the +//! transmit FIFO or \b false if there was no space available in the transmit +//! FIFO. +// +//***************************************************************************** +tBoolean +UARTCharPutNonBlocking(unsigned long ulBase, unsigned char ucData) +{ + // + // Check the arguments. + // + ASSERT(UARTBaseValid(ulBase)); + + // + // See if there is space in the transmit FIFO. + // + if(!(HWREG(ulBase + UART_O_FR) & UART_FR_TXFF)) + { + // + // Write this character to the transmit FIFO. + // + HWREG(ulBase + UART_O_DR) = ucData; + + // + // Success. + // + return(true); + } + else + { + // + // There is no space in the transmit FIFO, so return a failure. + // + return(false); + } +} + +//***************************************************************************** +// +//! Waits to send a character from the specified port. +//! +//! \param ulBase is the base address of the UART port. +//! \param ucData is the character to be transmitted. +//! +//! Sends the character \e ucData to the transmit FIFO for the specified port. +//! If there is no space available in the transmit FIFO, this function waits +//! until there is space available before returning. +//! +//! \return None. +// +//***************************************************************************** +void +UARTCharPut(unsigned long ulBase, unsigned char ucData) +{ + // + // Check the arguments. + // + ASSERT(UARTBaseValid(ulBase)); + + // + // Wait until space is available. + // + while(HWREG(ulBase + UART_O_FR) & UART_FR_TXFF) + { + } + + // + // Send the char. + // + HWREG(ulBase + UART_O_DR) = ucData; +} + +//***************************************************************************** +// +//! Causes a BREAK to be sent. +//! +//! \param ulBase is the base address of the UART port. +//! \param bBreakState controls the output level. +//! +//! Calling this function with \e bBreakState set to \b true asserts a break +//! condition on the UART. Calling this function with \e bBreakState set to +//! \b false removes the break condition. For proper transmission of a break +//! command, the break must be asserted for at least two complete frames. +//! +//! \return None. +// +//***************************************************************************** +void +UARTBreakCtl(unsigned long ulBase, tBoolean bBreakState) +{ + // + // Check the arguments. + // + ASSERT(UARTBaseValid(ulBase)); + + // + // Set the break condition as requested. + // + HWREG(ulBase + UART_O_LCRH) = + (bBreakState ? + (HWREG(ulBase + UART_O_LCRH) | UART_LCRH_BRK) : + (HWREG(ulBase + UART_O_LCRH) & ~(UART_LCRH_BRK))); +} + +//***************************************************************************** +// +//! Determines whether the UART transmitter is busy or not. +//! +//! \param ulBase is the base address of the UART port. +//! +//! Allows the caller to determine whether all transmitted bytes have cleared +//! the transmitter hardware. If \b false is returned, the transmit FIFO is +//! empty and all bits of the last transmitted character, including all stop +//! bits, have left the hardware shift register. +//! +//! \return Returns \b true if the UART is transmitting or \b false if all +//! transmissions are complete. +// +//***************************************************************************** +tBoolean +UARTBusy(unsigned long ulBase) +{ + // + // Check the argument. + // + ASSERT(UARTBaseValid(ulBase)); + + // + // Determine if the UART is busy. + // + return((HWREG(ulBase + UART_O_FR) & UART_FR_BUSY) ? true : false); +} + +//***************************************************************************** +// +//! Registers an interrupt handler for a UART interrupt. +//! +//! \param ulBase is the base address of the UART port. +//! \param pfnHandler is a pointer to the function to be called when the +//! UART interrupt occurs. +//! +//! This function does the actual registering of the interrupt handler. This +//! will enable the global interrupt in the interrupt controller; specific UART +//! interrupts must be enabled via UARTIntEnable(). It is the interrupt +//! handler's responsibility to clear the interrupt source. +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +UARTIntRegister(unsigned long ulBase, void (*pfnHandler)(void)) +{ + unsigned long ulInt; + + // + // Check the arguments. + // + ASSERT(UARTBaseValid(ulBase)); + + // + // Determine the interrupt number based on the UART port. + // + ulInt = ((ulBase == UART0_BASE) ? INT_UART0 : + ((ulBase == UART1_BASE) ? INT_UART1 : INT_UART2)); + + // + // Register the interrupt handler. + // + IntRegister(ulInt, pfnHandler); + + // + // Enable the UART interrupt. + // + IntEnable(ulInt); +} + +//***************************************************************************** +// +//! Unregisters an interrupt handler for a UART interrupt. +//! +//! \param ulBase is the base address of the UART port. +//! +//! This function does the actual unregistering of the interrupt handler. It +//! will clear the handler to be called when a UART interrupt occurs. This +//! will also mask off the interrupt in the interrupt controller so that the +//! interrupt handler no longer is called. +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +UARTIntUnregister(unsigned long ulBase) +{ + unsigned long ulInt; + + // + // Check the arguments. + // + ASSERT(UARTBaseValid(ulBase)); + + // + // Determine the interrupt number based on the UART port. + // + ulInt = ((ulBase == UART0_BASE) ? INT_UART0 : + ((ulBase == UART1_BASE) ? INT_UART1 : INT_UART2)); + + // + // Disable the interrupt. + // + IntDisable(ulInt); + + // + // Unregister the interrupt handler. + // + IntUnregister(ulInt); +} + +//***************************************************************************** +// +//! Enables individual UART interrupt sources. +//! +//! \param ulBase is the base address of the UART port. +//! \param ulIntFlags is the bit mask of the interrupt sources to be enabled. +//! +//! Enables the indicated UART interrupt sources. Only the sources that are +//! enabled can be reflected to the processor interrupt; disabled sources have +//! no effect on the processor. +//! +//! The \e ulIntFlags parameter is the logical OR of any of the following: +//! +//! - \b UART_INT_OE - Overrun Error interrupt +//! - \b UART_INT_BE - Break Error interrupt +//! - \b UART_INT_PE - Parity Error interrupt +//! - \b UART_INT_FE - Framing Error interrupt +//! - \b UART_INT_RT - Receive Timeout interrupt +//! - \b UART_INT_TX - Transmit interrupt +//! - \b UART_INT_RX - Receive interrupt +//! - \b UART_INT_DSR - DSR interrupt +//! - \b UART_INT_DCD - DCD interrupt +//! - \b UART_INT_CTS - CTS interrupt +//! - \b UART_INT_RI - RI interrupt +//! +//! \return None. +// +//***************************************************************************** +void +UARTIntEnable(unsigned long ulBase, unsigned long ulIntFlags) +{ + // + // Check the arguments. + // + ASSERT(UARTBaseValid(ulBase)); + + // + // Enable the specified interrupts. + // + HWREG(ulBase + UART_O_IM) |= ulIntFlags; +} + +//***************************************************************************** +// +//! Disables individual UART interrupt sources. +//! +//! \param ulBase is the base address of the UART port. +//! \param ulIntFlags is the bit mask of the interrupt sources to be disabled. +//! +//! Disables the indicated UART interrupt sources. Only the sources that are +//! enabled can be reflected to the processor interrupt; disabled sources have +//! no effect on the processor. +//! +//! The \e ulIntFlags parameter has the same definition as the \e ulIntFlags +//! parameter to UARTIntEnable(). +//! +//! \return None. +// +//***************************************************************************** +void +UARTIntDisable(unsigned long ulBase, unsigned long ulIntFlags) +{ + // + // Check the arguments. + // + ASSERT(UARTBaseValid(ulBase)); + + // + // Disable the specified interrupts. + // + HWREG(ulBase + UART_O_IM) &= ~(ulIntFlags); +} + +//***************************************************************************** +// +//! Gets the current interrupt status. +//! +//! \param ulBase is the base address of the UART port. +//! \param bMasked is \b false if the raw interrupt status is required and +//! \b true if the masked interrupt status is required. +//! +//! This returns the interrupt status for the specified UART. Either the raw +//! interrupt status or the status of interrupts that are allowed to reflect to +//! the processor can be returned. +//! +//! \return Returns the current interrupt status, enumerated as a bit field of +//! values described in UARTIntEnable(). +// +//***************************************************************************** +unsigned long +UARTIntStatus(unsigned long ulBase, tBoolean bMasked) +{ + // + // Check the arguments. + // + ASSERT(UARTBaseValid(ulBase)); + + // + // Return either the interrupt status or the raw interrupt status as + // requested. + // + if(bMasked) + { + return(HWREG(ulBase + UART_O_MIS)); + } + else + { + return(HWREG(ulBase + UART_O_RIS)); + } +} + +//***************************************************************************** +// +//! Clears UART interrupt sources. +//! +//! \param ulBase is the base address of the UART port. +//! \param ulIntFlags is a bit mask of the interrupt sources to be cleared. +//! +//! The specified UART interrupt sources are cleared, so that they no longer +//! assert. This function must be called in the interrupt handler to keep the +//! interrupt from being recognized again immediately upon exit. +//! +//! The \e ulIntFlags parameter has the same definition as the \e ulIntFlags +//! parameter to UARTIntEnable(). +//! +//! \note Since there is a write buffer in the Cortex-M3 processor, it may take +//! several clock cycles before the interrupt source is actually cleared. +//! Therefore, it is recommended that the interrupt source be cleared early in +//! the interrupt handler (as opposed to the very last action) to avoid +//! returning from the interrupt handler before the interrupt source is +//! actually cleared. Failure to do so may result in the interrupt handler +//! being immediately reentered (since NVIC still sees the interrupt source +//! asserted). +//! +//! \return None. +// +//***************************************************************************** +void +UARTIntClear(unsigned long ulBase, unsigned long ulIntFlags) +{ + // + // Check the arguments. + // + ASSERT(UARTBaseValid(ulBase)); + + // + // Clear the requested interrupt sources. + // + HWREG(ulBase + UART_O_ICR) = ulIntFlags; +} + +//***************************************************************************** +// +//! Enable UART DMA operation. +//! +//! \param ulBase is the base address of the UART port. +//! \param ulDMAFlags is a bit mask of the DMA features to enable. +//! +//! The specified UART DMA features are enabled. The UART can be +//! configured to use DMA for transmit or receive, and to disable +//! receive if an error occurs. The \e ulDMAFlags parameter is the +//! logical OR of any of the following values: +//! +//! - UART_DMA_RX - enable DMA for receive +//! - UART_DMA_TX - enable DMA for transmit +//! - UART_DMA_ERR_RXSTOP - disable DMA receive on UART error +//! +//! \note The uDMA controller must also be set up before DMA can be used +//! with the UART. +//! +//! \return None. +// +//***************************************************************************** +void +UARTDMAEnable(unsigned long ulBase, unsigned long ulDMAFlags) +{ + // + // Check the arguments. + // + ASSERT(UARTBaseValid(ulBase)); + + // + // Set the requested bits in the UART DMA control register. + // + HWREG(ulBase + UART_O_DMACTL) |= ulDMAFlags; +} + +//***************************************************************************** +// +//! Disable UART DMA operation. +//! +//! \param ulBase is the base address of the UART port. +//! \param ulDMAFlags is a bit mask of the DMA features to disable. +//! +//! This function is used to disable UART DMA features that were enabled +//! by UARTDMAEnable(). The specified UART DMA features are disabled. The +//! \e ulDMAFlags parameter is the logical OR of any of the following values: +//! +//! - UART_DMA_RX - disable DMA for receive +//! - UART_DMA_TX - disable DMA for transmit +//! - UART_DMA_ERR_RXSTOP - do not disable DMA receive on UART error +//! +//! \return None. +// +//***************************************************************************** +void +UARTDMADisable(unsigned long ulBase, unsigned long ulDMAFlags) +{ + // + // Check the arguments. + // + ASSERT(UARTBaseValid(ulBase)); + + // + // Clear the requested bits in the UART DMA control register. + // + HWREG(ulBase + UART_O_DMACTL) &= ~ulDMAFlags; +} + +//***************************************************************************** +// +//! Gets current receiver errors. +//! +//! \param ulBase is the base address of the UART port. +//! +//! This function returns the current state of each of the 4 receiver error +//! sources. The returned errors are equivalent to the four error bits +//! returned via the previous call to UARTCharGet() or UARTCharGetNonBlocking() +//! with the exception that the overrun error is set immediately the overrun +//! occurs rather than when a character is next read. +//! +//! \return Returns a logical OR combination of the receiver error flags, +//! \b UART_RXERROR_FRAMING, \b UART_RXERROR_PARITY, \b UART_RXERROR_BREAK +//! and \b UART_RXERROR_OVERRUN. +// +//***************************************************************************** +unsigned long +UARTRxErrorGet(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(UARTBaseValid(ulBase)); + + // + // Return the current value of the receive status register. + // + return(HWREG(ulBase + UART_O_RSR) & 0x0000000F); +} + +//***************************************************************************** +// +//! Clears all reported receiver errors. +//! +//! \param ulBase is the base address of the UART port. +//! +//! This function is used to clear all receiver error conditions reported via +//! UARTRxErrorGet(). If using the overrun, framing error, parity error or +//! break interrupts, this function must be called after clearing the interrupt +//! to ensure that later errors of the same type trigger another interrupt. +//! +//! \return None. +// +//***************************************************************************** +void +UARTRxErrorClear(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(UARTBaseValid(ulBase)); + + // + // Any write to the Error Clear Register will clear all bits which are + // currently set. + // + HWREG(ulBase + UART_O_ECR) = 0; +} + +//***************************************************************************** +// +// Close the Doxygen group. +//! @} +// +//***************************************************************************** diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/uart.h b/bsp/lm3s_9b9x/Libraries/driverlib/uart.h new file mode 100644 index 0000000000000000000000000000000000000000..735a83f64b073275fd91a2de578ea08351c09c10 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/uart.h @@ -0,0 +1,243 @@ +//***************************************************************************** +// +// uart.h - Defines and Macros for the UART. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +#ifndef __UART_H__ +#define __UART_H__ + +//***************************************************************************** +// +// If building with a C++ compiler, make all of the definitions in this header +// have a C binding. +// +//***************************************************************************** +#ifdef __cplusplus +extern "C" +{ +#endif + +//***************************************************************************** +// +// Values that can be passed to UARTIntEnable, UARTIntDisable, and UARTIntClear +// as the ulIntFlags parameter, and returned from UARTIntStatus. +// +//***************************************************************************** +#define UART_INT_OE 0x400 // Overrun Error Interrupt Mask +#define UART_INT_BE 0x200 // Break Error Interrupt Mask +#define UART_INT_PE 0x100 // Parity Error Interrupt Mask +#define UART_INT_FE 0x080 // Framing Error Interrupt Mask +#define UART_INT_RT 0x040 // Receive Timeout Interrupt Mask +#define UART_INT_TX 0x020 // Transmit Interrupt Mask +#define UART_INT_RX 0x010 // Receive Interrupt Mask +#define UART_INT_DSR 0x008 // DSR Modem Interrupt Mask +#define UART_INT_DCD 0x004 // DCD Modem Interrupt Mask +#define UART_INT_CTS 0x002 // CTS Modem Interrupt Mask +#define UART_INT_RI 0x001 // RI Modem Interrupt Mask + +//***************************************************************************** +// +// Values that can be passed to UARTConfigSetExpClk as the ulConfig parameter +// and returned by UARTConfigGetExpClk in the pulConfig parameter. +// Additionally, the UART_CONFIG_PAR_* subset can be passed to +// UARTParityModeSet as the ulParity parameter, and are returned by +// UARTParityModeGet. +// +//***************************************************************************** +#define UART_CONFIG_WLEN_MASK 0x00000060 // Mask for extracting word length +#define UART_CONFIG_WLEN_8 0x00000060 // 8 bit data +#define UART_CONFIG_WLEN_7 0x00000040 // 7 bit data +#define UART_CONFIG_WLEN_6 0x00000020 // 6 bit data +#define UART_CONFIG_WLEN_5 0x00000000 // 5 bit data +#define UART_CONFIG_STOP_MASK 0x00000008 // Mask for extracting stop bits +#define UART_CONFIG_STOP_ONE 0x00000000 // One stop bit +#define UART_CONFIG_STOP_TWO 0x00000008 // Two stop bits +#define UART_CONFIG_PAR_MASK 0x00000086 // Mask for extracting parity +#define UART_CONFIG_PAR_NONE 0x00000000 // No parity +#define UART_CONFIG_PAR_EVEN 0x00000006 // Even parity +#define UART_CONFIG_PAR_ODD 0x00000002 // Odd parity +#define UART_CONFIG_PAR_ONE 0x00000082 // Parity bit is one +#define UART_CONFIG_PAR_ZERO 0x00000086 // Parity bit is zero + +//***************************************************************************** +// +// Values that can be passed to UARTFIFOLevelSet as the ulTxLevel parameter and +// returned by UARTFIFOLevelGet in the pulTxLevel. +// +//***************************************************************************** +#define UART_FIFO_TX1_8 0x00000000 // Transmit interrupt at 1/8 Full +#define UART_FIFO_TX2_8 0x00000001 // Transmit interrupt at 1/4 Full +#define UART_FIFO_TX4_8 0x00000002 // Transmit interrupt at 1/2 Full +#define UART_FIFO_TX6_8 0x00000003 // Transmit interrupt at 3/4 Full +#define UART_FIFO_TX7_8 0x00000004 // Transmit interrupt at 7/8 Full + +//***************************************************************************** +// +// Values that can be passed to UARTFIFOLevelSet as the ulRxLevel parameter and +// returned by UARTFIFOLevelGet in the pulRxLevel. +// +//***************************************************************************** +#define UART_FIFO_RX1_8 0x00000000 // Receive interrupt at 1/8 Full +#define UART_FIFO_RX2_8 0x00000008 // Receive interrupt at 1/4 Full +#define UART_FIFO_RX4_8 0x00000010 // Receive interrupt at 1/2 Full +#define UART_FIFO_RX6_8 0x00000018 // Receive interrupt at 3/4 Full +#define UART_FIFO_RX7_8 0x00000020 // Receive interrupt at 7/8 Full + +//***************************************************************************** +// +// Values that can be passed to UARTDMAEnable() and UARTDMADisable(). +// +//***************************************************************************** +#define UART_DMA_ERR_RXSTOP 0x00000004 // Stop DMA receive if UART error +#define UART_DMA_TX 0x00000002 // Enable DMA for transmit +#define UART_DMA_RX 0x00000001 // Enable DMA for receive + +//***************************************************************************** +// +// Values returned from UARTRxErrorGet(). +// +//***************************************************************************** +#define UART_RXERROR_OVERRUN 0x00000008 +#define UART_RXERROR_BREAK 0x00000004 +#define UART_RXERROR_PARITY 0x00000002 +#define UART_RXERROR_FRAMING 0x00000001 + +//***************************************************************************** +// +// Values that can be passed to UARTHandshakeOutputsSet() or returned from +// UARTHandshakeOutputGet(). +// +//***************************************************************************** +#define UART_OUTPUT_RTS 0x00000800 +#define UART_OUTPUT_DTR 0x00000400 + +//***************************************************************************** +// +// Values that can be returned from UARTHandshakeInputsGet(). +// +//***************************************************************************** +#define UART_INPUT_RI 0x00000100 +#define UART_INPUT_DCD 0x00000004 +#define UART_INPUT_DSR 0x00000002 +#define UART_INPUT_CTS 0x00000001 + +//***************************************************************************** +// +// Values that can be passed to UARTFlowControl() or returned from +// UARTFlowControlGet(). +// +//***************************************************************************** +#define UART_FLOWCONTROL_TX 0x00008000 +#define UART_FLOWCONTROL_RX 0x00004000 +#define UART_FLOWCONTROL_NONE 0x00000000 + +//***************************************************************************** +// +// Values that can be passed to UARTTxIntModeSet() or returned from +// UARTTxIntModeGet(). +// +//***************************************************************************** +#define UART_TXINT_MODE_FIFO 0x00000000 +#define UART_TXINT_MODE_EOT 0x00000010 + +//***************************************************************************** +// +// API Function prototypes +// +//***************************************************************************** +extern void UARTParityModeSet(unsigned long ulBase, unsigned long ulParity); +extern unsigned long UARTParityModeGet(unsigned long ulBase); +extern void UARTFIFOLevelSet(unsigned long ulBase, unsigned long ulTxLevel, + unsigned long ulRxLevel); +extern void UARTFIFOLevelGet(unsigned long ulBase, unsigned long *pulTxLevel, + unsigned long *pulRxLevel); +extern void UARTConfigSetExpClk(unsigned long ulBase, unsigned long ulUARTClk, + unsigned long ulBaud, unsigned long ulConfig); +extern void UARTConfigGetExpClk(unsigned long ulBase, unsigned long ulUARTClk, + unsigned long *pulBaud, + unsigned long *pulConfig); +extern void UARTEnable(unsigned long ulBase); +extern void UARTDisable(unsigned long ulBase); +extern void UARTFIFOEnable(unsigned long ulBase); +extern void UARTFIFODisable(unsigned long ulBase); +extern void UARTEnableSIR(unsigned long ulBase, tBoolean bLowPower); +extern void UARTDisableSIR(unsigned long ulBase); +extern tBoolean UARTCharsAvail(unsigned long ulBase); +extern tBoolean UARTSpaceAvail(unsigned long ulBase); +extern long UARTCharGetNonBlocking(unsigned long ulBase); +extern long UARTCharGet(unsigned long ulBase); +extern tBoolean UARTCharPutNonBlocking(unsigned long ulBase, + unsigned char ucData); +extern void UARTCharPut(unsigned long ulBase, unsigned char ucData); +extern void UARTBreakCtl(unsigned long ulBase, tBoolean bBreakState); +extern tBoolean UARTBusy(unsigned long ulBase); +extern void UARTIntRegister(unsigned long ulBase, void(*pfnHandler)(void)); +extern void UARTIntUnregister(unsigned long ulBase); +extern void UARTIntEnable(unsigned long ulBase, unsigned long ulIntFlags); +extern void UARTIntDisable(unsigned long ulBase, unsigned long ulIntFlags); +extern unsigned long UARTIntStatus(unsigned long ulBase, tBoolean bMasked); +extern void UARTIntClear(unsigned long ulBase, unsigned long ulIntFlags); +extern void UARTDMAEnable(unsigned long ulBase, unsigned long ulDMAFlags); +extern void UARTDMADisable(unsigned long ulBase, unsigned long ulDMAFlags); +extern unsigned long UARTRxErrorGet(unsigned long ulBase); +extern void UARTRxErrorClear(unsigned long ulBase); +extern void UARTSmartCardEnable(unsigned long ulBase); +extern void UARTSmartCardDisable(unsigned long ulBase); +extern void UARTModemControlSet(unsigned long ulBase, + unsigned long ulControl); +extern void UARTModemControlClear(unsigned long ulBase, + unsigned long ulControl); +extern unsigned long UARTModemControlGet(unsigned long ulBase); +extern unsigned long UARTModemStatusGet(unsigned long ulBase); +extern void UARTFlowControlSet(unsigned long ulBase, unsigned long ulMode); +extern unsigned long UARTFlowControlGet(unsigned long ulBase); +extern void UARTTxIntModeSet(unsigned long ulBase, unsigned long ulMode); +extern unsigned long UARTTxIntModeGet(unsigned long ulBase); + +//***************************************************************************** +// +// Several UART APIs have been renamed, with the original function name being +// deprecated. These defines provide backward compatibility. +// +//***************************************************************************** +#ifndef DEPRECATED +#include "driverlib/sysctl.h" +#define UARTConfigSet(a, b, c) \ + UARTConfigSetExpClk(a, SysCtlClockGet(), b, c) +#define UARTConfigGet(a, b, c) \ + UARTConfigGetExpClk(a, SysCtlClockGet(), b, c) +#define UARTCharNonBlockingGet(a) \ + UARTCharGetNonBlocking(a) +#define UARTCharNonBlockingPut(a, b) \ + UARTCharPutNonBlocking(a, b) +#endif + +//***************************************************************************** +// +// Mark the end of the C bindings section for C++ compilers. +// +//***************************************************************************** +#ifdef __cplusplus +} +#endif + +#endif // __UART_H__ diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/udma.c b/bsp/lm3s_9b9x/Libraries/driverlib/udma.c new file mode 100644 index 0000000000000000000000000000000000000000..9924d9d3dcdaa94bdfae31cf0915b3aefd1b4b22 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/udma.c @@ -0,0 +1,1221 @@ +//***************************************************************************** +// +// udma.c - Driver for the micro-DMA controller. +// +// Copyright (c) 2007-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +//***************************************************************************** +// +//! \addtogroup udma_api +//! @{ +// +//***************************************************************************** + +#include "inc/hw_types.h" +#include "inc/hw_udma.h" +#include "driverlib/debug.h" +#include "driverlib/interrupt.h" +#include "driverlib/udma.h" + +//***************************************************************************** +// +//! Enables the uDMA controller for use. +//! +//! This function enables the uDMA controller. The uDMA controller must be +//! enabled before it can be configured and used. +//! +//! \return None. +// +//***************************************************************************** +void +uDMAEnable(void) +{ + // + // Set the master enable bit in the config register. + // + HWREG(UDMA_CFG) = UDMA_CFG_MASTEN; +} + +//***************************************************************************** +// +//! Disables the uDMA controller for use. +//! +//! This function disables the uDMA controller. Once disabled, the uDMA +//! controller will not operate until re-enabled with uDMAEnable(). +//! +//! \return None. +// +//***************************************************************************** +void +uDMADisable(void) +{ + // + // Clear the master enable bit in the config register. + // + HWREG(UDMA_CFG) = 0; +} + +//***************************************************************************** +// +//! Gets the uDMA error status. +//! +//! This function returns the uDMA error status. It should be called from +//! within the uDMA error interrupt handler to determine if a uDMA error +//! occurred. +//! +//! \return Returns non-zero if a uDMA error is pending. +// +//***************************************************************************** +unsigned long +uDMAErrorStatusGet(void) +{ + // + // Return the uDMA error status. + // + return(HWREG(UDMA_ERRCLR)); +} + +//***************************************************************************** +// +//! Clears the uDMA error interrupt. +//! +//! This function clears a pending uDMA error interrupt. It should be called +//! from within the uDMA error interrupt handler to clear the interrupt. +//! +//! \return None. +// +//***************************************************************************** +void +uDMAErrorStatusClear(void) +{ + // + // Clear the uDMA error interrupt. + // + HWREG(UDMA_ERRCLR) = 1; +} + +//***************************************************************************** +// +//! Enables a uDMA channel for operation. +//! +//! \param ulChannel is the channel number to enable. +//! +//! This function enables a specific uDMA channel for use. This function must +//! be used to enable a channel before it can be used to perform a uDMA +//! transfer. +//! +//! When a uDMA transfer is completed, the channel will be automatically +//! disabled by the uDMA controller. Therefore, this function should be called +//! prior to starting up any new transfer. +//! +//! The \e ulChannel parameter must be one of the following: +//! +//! - \b UDMA_CHANNEL_UART0RX for UART 0 receive channel +//! - \b UDMA_CHANNEL_UART0TX for UART 0 transmit channel +//! - \b UDMA_CHANNEL_UART1RX for UART 1 receive channel +//! - \b UDMA_CHANNEL_UART1TX for UART 1 transmit channel +//! - \b UDMA_CHANNEL_SSI0RX for SSI 0 receive channel +//! - \b UDMA_CHANNEL_SSI0TX for SSI 0 transmit channel +//! - \b UDMA_CHANNEL_SSI1RX for SSI 1 receive channel +//! - \b UDMA_CHANNEL_SSI1TX for SSI 1 transmit channel +//! - \b UDMA_CHANNEL_SW for the software dedicated uDMA channel +//! +//! And for microcontrollers that have a USB peripheral: +//! +//! - \b UDMA_CHANNEL_USBEP1RX for USB endpoint 1 receive +//! - \b UDMA_CHANNEL_USBEP1TX for USB endpoint 1 transmit +//! - \b UDMA_CHANNEL_USBEP2RX for USB endpoint 2 receive +//! - \b UDMA_CHANNEL_USBEP2TX for USB endpoint 2 transmit +//! - \b UDMA_CHANNEL_USBEP3RX for USB endpoint 3 receive +//! - \b UDMA_CHANNEL_USBEP3TX for USB endpoint 3 transmit +//! +//! \return None. +// +//***************************************************************************** +void +uDMAChannelEnable(unsigned long ulChannel) +{ + // + // Check the arguments. + // + ASSERT(ulChannel < 32); + + // + // Set the bit for this channel in the enable set register. + // + HWREG(UDMA_ENASET) = 1 << ulChannel; +} + +//***************************************************************************** +// +//! Disables a uDMA channel for operation. +//! +//! \param ulChannel is the channel number to disable. +//! +//! This function disables a specific uDMA channel. Once disabled, a channel +//! will not respond to uDMA transfer requests until re-enabled via +//! uDMAChannelEnable(). +//! +//! The \e ulChannel parameter must be one of the following: +//! +//! - \b UDMA_CHANNEL_UART0RX for UART 0 receive channel +//! - \b UDMA_CHANNEL_UART0TX for UART 0 transmit channel +//! - \b UDMA_CHANNEL_UART1RX for UART 1 receive channel +//! - \b UDMA_CHANNEL_UART1TX for UART 1 transmit channel +//! - \b UDMA_CHANNEL_SSI0RX for SSI 0 receive channel +//! - \b UDMA_CHANNEL_SSI0TX for SSI 0 transmit channel +//! - \b UDMA_CHANNEL_SSI1RX for SSI 1 receive channel +//! - \b UDMA_CHANNEL_SSI1TX for SSI 1 transmit channel +//! - \b UDMA_CHANNEL_SW for the software dedicated uDMA channel +//! +//! And for microcontrollers that have a USB peripheral: +//! +//! - \b UDMA_CHANNEL_USBEP1RX for USB endpoint 1 receive +//! - \b UDMA_CHANNEL_USBEP1TX for USB endpoint 1 transmit +//! - \b UDMA_CHANNEL_USBEP2RX for USB endpoint 2 receive +//! - \b UDMA_CHANNEL_USBEP2TX for USB endpoint 2 transmit +//! - \b UDMA_CHANNEL_USBEP3RX for USB endpoint 3 receive +//! - \b UDMA_CHANNEL_USBEP3TX for USB endpoint 3 transmit +//! +//! \return None. +// +//***************************************************************************** +void +uDMAChannelDisable(unsigned long ulChannel) +{ + // + // Check the arguments. + // + ASSERT(ulChannel < 32); + + // + // Set the bit for this channel in the enable clear register. + // + HWREG(UDMA_ENACLR) = 1 << ulChannel; +} + +//***************************************************************************** +// +//! Checks if a uDMA channel is enabled for operation. +//! +//! \param ulChannel is the channel number to check. +//! +//! This function checks to see if a specific uDMA channel is enabled. This +//! can be used to check the status of a transfer, since the channel will +//! be automatically disabled at the end of a transfer. +//! +//! The \e ulChannel parameter must be one of the following: +//! +//! - \b UDMA_CHANNEL_UART0RX for UART 0 receive channel +//! - \b UDMA_CHANNEL_UART0TX for UART 0 transmit channel +//! - \b UDMA_CHANNEL_UART1RX for UART 1 receive channel +//! - \b UDMA_CHANNEL_UART1TX for UART 1 transmit channel +//! - \b UDMA_CHANNEL_SSI0RX for SSI 0 receive channel +//! - \b UDMA_CHANNEL_SSI0TX for SSI 0 transmit channel +//! - \b UDMA_CHANNEL_SSI1RX for SSI 1 receive channel +//! - \b UDMA_CHANNEL_SSI1TX for SSI 1 transmit channel +//! - \b UDMA_CHANNEL_SW for the software dedicated uDMA channel +//! +//! And for microcontrollers that have a USB peripheral: +//! +//! - \b UDMA_CHANNEL_USBEP1RX for USB endpoint 1 receive +//! - \b UDMA_CHANNEL_USBEP1TX for USB endpoint 1 transmit +//! - \b UDMA_CHANNEL_USBEP2RX for USB endpoint 2 receive +//! - \b UDMA_CHANNEL_USBEP2TX for USB endpoint 2 transmit +//! - \b UDMA_CHANNEL_USBEP3RX for USB endpoint 3 receive +//! - \b UDMA_CHANNEL_USBEP3TX for USB endpoint 3 transmit +//! +//! \return Returns \b true if the channel is enabled, \b false if disabled. +// +//***************************************************************************** +tBoolean +uDMAChannelIsEnabled(unsigned long ulChannel) +{ + // + // Check the arguments. + // + ASSERT(ulChannel < 32); + + // + // AND the specified channel bit with the enable register, and return the + // result. + // + return((HWREG(UDMA_ENASET) & (1 << ulChannel)) ? true : false); +} + +//***************************************************************************** +// +//! Sets the base address for the channel control table. +//! +//! \param pControlTable is a pointer to the 1024 byte aligned base address +//! of the uDMA channel control table. +//! +//! This function sets the base address of the channel control table. This +//! table resides in system memory and holds control information for each uDMA +//! channel. The table must be aligned on a 1024 byte boundary. The base +//! address must be set before any of the channel functions can be used. +//! +//! The size of the channel control table depends on the number of uDMA +//! channels, and which transfer modes are used. Refer to the introductory +//! text and the microcontroller datasheet for more information about the +//! channel control table. +//! +//! \return None. +// +//***************************************************************************** +void +uDMAControlBaseSet(void *pControlTable) +{ + // + // Check the arguments. + // + ASSERT(((unsigned long)pControlTable & ~0x3FF) == + (unsigned long)pControlTable); + ASSERT((unsigned long)pControlTable >= 0x20000000); + + // + // Program the base address into the register. + // + HWREG(UDMA_CTLBASE) = (unsigned long)pControlTable; +} + +//***************************************************************************** +// +//! Gets the base address for the channel control table. +//! +//! This function gets the base address of the channel control table. This +//! table resides in system memory and holds control information for each uDMA +//! channel. +//! +//! \return Returns a pointer to the base address of the channel control table. +// +//***************************************************************************** +void * +uDMAControlBaseGet(void) +{ + // + // Read the current value of the control base register, and return it to + // the caller. + // + return((void *)HWREG(UDMA_CTLBASE)); +} + +//***************************************************************************** +// +//! Requests a uDMA channel to start a transfer. +//! +//! \param ulChannel is the channel number on which to request a uDMA transfer. +//! +//! This function allows software to request a uDMA channel to begin a +//! transfer. This could be used for performing a memory to memory transfer, +//! or if for some reason a transfer needs to be initiated by software instead +//! of the peripheral associated with that channel. +//! +//! The \e ulChannel parameter must be one of the following: +//! +//! - \b UDMA_CHANNEL_UART0RX for UART 0 receive channel +//! - \b UDMA_CHANNEL_UART0TX for UART 0 transmit channel +//! - \b UDMA_CHANNEL_UART1RX for UART 1 receive channel +//! - \b UDMA_CHANNEL_UART1TX for UART 1 transmit channel +//! - \b UDMA_CHANNEL_SSI0RX for SSI 0 receive channel +//! - \b UDMA_CHANNEL_SSI0TX for SSI 0 transmit channel +//! - \b UDMA_CHANNEL_SSI1RX for SSI 1 receive channel +//! - \b UDMA_CHANNEL_SSI1TX for SSI 1 transmit channel +//! - \b UDMA_CHANNEL_SW for the software dedicated uDMA channel +//! +//! And for microcontrollers that have a USB peripheral: +//! +//! - \b UDMA_CHANNEL_USBEP1RX for USB endpoint 1 receive +//! - \b UDMA_CHANNEL_USBEP1TX for USB endpoint 1 transmit +//! - \b UDMA_CHANNEL_USBEP2RX for USB endpoint 2 receive +//! - \b UDMA_CHANNEL_USBEP2TX for USB endpoint 2 transmit +//! - \b UDMA_CHANNEL_USBEP3RX for USB endpoint 3 receive +//! - \b UDMA_CHANNEL_USBEP3TX for USB endpoint 3 transmit +//! +//! \note If the channel is \b UDMA_CHANNEL_SW and interrupts are used, then +//! the completion will be signaled on the uDMA dedicated interrupt. If a +//! peripheral channel is used, then the completion will be signaled on the +//! peripheral's interrupt. +//! +//! \return None. +// +//***************************************************************************** +void +uDMAChannelRequest(unsigned long ulChannel) +{ + // + // Check the arguments. + // + ASSERT(ulChannel < 32); + + // + // Set the bit for this channel in the software uDMA request register. + // + HWREG(UDMA_SWREQ) = 1 << ulChannel; +} + +//***************************************************************************** +// +//! Enables attributes of a uDMA channel. +//! +//! \param ulChannel is the channel to configure. +//! \param ulAttr is a combination of attributes for the channel. +//! +//! The \e ulChannel parameter must be one of the following: +//! +//! - \b UDMA_CHANNEL_UART0RX for UART 0 receive channel +//! - \b UDMA_CHANNEL_UART0TX for UART 0 transmit channel +//! - \b UDMA_CHANNEL_UART1RX for UART 1 receive channel +//! - \b UDMA_CHANNEL_UART1TX for UART 1 transmit channel +//! - \b UDMA_CHANNEL_SSI0RX for SSI 0 receive channel +//! - \b UDMA_CHANNEL_SSI0TX for SSI 0 transmit channel +//! - \b UDMA_CHANNEL_SSI1RX for SSI 1 receive channel +//! - \b UDMA_CHANNEL_SSI1TX for SSI 1 transmit channel +//! - \b UDMA_CHANNEL_SW for the software dedicated uDMA channel +//! +//! And for microcontrollers that have a USB peripheral: +//! +//! - \b UDMA_CHANNEL_USBEP1RX for USB endpoint 1 receive +//! - \b UDMA_CHANNEL_USBEP1TX for USB endpoint 1 transmit +//! - \b UDMA_CHANNEL_USBEP2RX for USB endpoint 2 receive +//! - \b UDMA_CHANNEL_USBEP2TX for USB endpoint 2 transmit +//! - \b UDMA_CHANNEL_USBEP3RX for USB endpoint 3 receive +//! - \b UDMA_CHANNEL_USBEP3TX for USB endpoint 3 transmit +//! +//! The \e ulAttr parameter is the logical OR of any of the following: +//! +//! - \b UDMA_ATTR_USEBURST is used to restrict transfers to use only a burst +//! mode. +//! - \b UDMA_ATTR_ALTSELECT is used to select the alternate control structure +//! for this channel. +//! - \b UDMA_ATTR_HIGH_PRIORITY is used to set this channel to high priority. +//! - \b UDMA_ATTR_REQMASK is used to mask the hardware request signal from the +//! peripheral for this channel. +//! +//! \return None. +// +//***************************************************************************** +void +uDMAChannelAttributeEnable(unsigned long ulChannel, unsigned long ulAttr) +{ + // + // Check the arguments. + // + ASSERT(ulChannel < 32); + ASSERT((ulAttr & ~(UDMA_ATTR_USEBURST | UDMA_ATTR_ALTSELECT | + UDMA_ATTR_HIGH_PRIORITY | UDMA_ATTR_REQMASK)) == 0); + + // + // Set the useburst bit for this channel if set in ulConfig. + // + if(ulAttr & UDMA_ATTR_USEBURST) + { + HWREG(UDMA_USEBURSTSET) = 1 << ulChannel; + } + + // + // Set the alternate control select bit for this channel, + // if set in ulConfig. + // + if(ulAttr & UDMA_ATTR_ALTSELECT) + { + HWREG(UDMA_ALTSET) = 1 << ulChannel; + } + + // + // Set the high priority bit for this channel, if set in ulConfig. + // + if(ulAttr & UDMA_ATTR_HIGH_PRIORITY) + { + HWREG(UDMA_PRIOSET) = 1 << ulChannel; + } + + // + // Set the request mask bit for this channel, if set in ulConfig. + // + if(ulAttr & UDMA_ATTR_REQMASK) + { + HWREG(UDMA_REQMASKSET) = 1 << ulChannel; + } +} + +//***************************************************************************** +// +//! Disables attributes of a uDMA channel. +//! +//! \param ulChannel is the channel to configure. +//! \param ulAttr is a combination of attributes for the channel. +//! +//! This function is used to disable attributes of a uDMA channel. +//! +//! The \e ulChannel parameter must be one of the following: +//! +//! - \b UDMA_CHANNEL_UART0RX for UART 0 receive channel +//! - \b UDMA_CHANNEL_UART0TX for UART 0 transmit channel +//! - \b UDMA_CHANNEL_UART1RX for UART 1 receive channel +//! - \b UDMA_CHANNEL_UART1TX for UART 1 transmit channel +//! - \b UDMA_CHANNEL_SSI0RX for SSI 0 receive channel +//! - \b UDMA_CHANNEL_SSI0TX for SSI 0 transmit channel +//! - \b UDMA_CHANNEL_SSI1RX for SSI 1 receive channel +//! - \b UDMA_CHANNEL_SSI1TX for SSI 1 transmit channel +//! - \b UDMA_CHANNEL_SW for the software dedicated uDMA channel +//! +//! And for microcontrollers that have a USB peripheral: +//! +//! - \b UDMA_CHANNEL_USBEP1RX for USB endpoint 1 receive +//! - \b UDMA_CHANNEL_USBEP1TX for USB endpoint 1 transmit +//! - \b UDMA_CHANNEL_USBEP2RX for USB endpoint 2 receive +//! - \b UDMA_CHANNEL_USBEP2TX for USB endpoint 2 transmit +//! - \b UDMA_CHANNEL_USBEP3RX for USB endpoint 3 receive +//! - \b UDMA_CHANNEL_USBEP3TX for USB endpoint 3 transmit +//! +//! The \e ulAttr parameter is the logical OR of any of the following: +//! +//! - \b UDMA_ATTR_USEBURST is used to restrict transfers to use only a burst +//! mode. +//! - \b UDMA_ATTR_ALTSELECT is used to select the alternate control structure +//! for this channel. +//! - \b UDMA_ATTR_HIGH_PRIORITY is used to set this channel to high priority. +//! - \b UDMA_ATTR_REQMASK is used to mask the hardware request signal from the +//! peripheral for this channel. +//! +//! \return None. +// +//***************************************************************************** +void +uDMAChannelAttributeDisable(unsigned long ulChannel, unsigned long ulAttr) +{ + // + // Check the arguments. + // + ASSERT(ulChannel < 32); + ASSERT((ulAttr & ~(UDMA_ATTR_USEBURST | UDMA_ATTR_ALTSELECT | + UDMA_ATTR_HIGH_PRIORITY | UDMA_ATTR_REQMASK)) == 0); + + // + // Clear the useburst bit for this channel if set in ulConfig. + // + if(ulAttr & UDMA_ATTR_USEBURST) + { + HWREG(UDMA_USEBURSTCLR) = 1 << ulChannel; + } + + // + // Clear the alternate control select bit for this channel, if set in + // ulConfig. + // + if(ulAttr & UDMA_ATTR_ALTSELECT) + { + HWREG(UDMA_ALTCLR) = 1 << ulChannel; + } + + // + // Clear the high priority bit for this channel, if set in ulConfig. + // + if(ulAttr & UDMA_ATTR_HIGH_PRIORITY) + { + HWREG(UDMA_PRIOCLR) = 1 << ulChannel; + } + + // + // Clear the request mask bit for this channel, if set in ulConfig. + // + if(ulAttr & UDMA_ATTR_REQMASK) + { + HWREG(UDMA_REQMASKCLR) = 1 << ulChannel; + } +} + +//***************************************************************************** +// +//! Gets the enabled attributes of a uDMA channel. +//! +//! \param ulChannel is the channel to configure. +//! +//! This function returns a combination of flags representing the attributes of +//! the uDMA channel. +//! +//! The \e ulChannel parameter must be one of the following: +//! +//! - \b UDMA_CHANNEL_UART0RX for UART 0 receive channel +//! - \b UDMA_CHANNEL_UART0TX for UART 0 transmit channel +//! - \b UDMA_CHANNEL_UART1RX for UART 1 receive channel +//! - \b UDMA_CHANNEL_UART1TX for UART 1 transmit channel +//! - \b UDMA_CHANNEL_SSI0RX for SSI 0 receive channel +//! - \b UDMA_CHANNEL_SSI0TX for SSI 0 transmit channel +//! - \b UDMA_CHANNEL_SSI1RX for SSI 1 receive channel +//! - \b UDMA_CHANNEL_SSI1TX for SSI 1 transmit channel +//! - \b UDMA_CHANNEL_SW for the software dedicated uDMA channel +//! +//! And for microcontrollers that have a USB peripheral: +//! +//! - \b UDMA_CHANNEL_USBEP1RX for USB endpoint 1 receive +//! - \b UDMA_CHANNEL_USBEP1TX for USB endpoint 1 transmit +//! - \b UDMA_CHANNEL_USBEP2RX for USB endpoint 2 receive +//! - \b UDMA_CHANNEL_USBEP2TX for USB endpoint 2 transmit +//! - \b UDMA_CHANNEL_USBEP3RX for USB endpoint 3 receive +//! - \b UDMA_CHANNEL_USBEP3TX for USB endpoint 3 transmit +//! +//! \return Returns the logical OR of the attributes of the uDMA channel, which +//! can be any of the following: +//! - \b UDMA_ATTR_USEBURST is used to restrict transfers to use only a burst +//! mode. +//! - \b UDMA_ATTR_ALTSELECT is used to select the alternate control structure +//! for this channel. +//! - \b UDMA_ATTR_HIGH_PRIORITY is used to set this channel to high priority. +//! - \b UDMA_ATTR_REQMASK is used to mask the hardware request signal from the +//! peripheral for this channel. +// +//***************************************************************************** +unsigned long +uDMAChannelAttributeGet(unsigned long ulChannel) +{ + unsigned long ulAttr = 0; + + // + // Check the arguments. + // + ASSERT(ulChannel < 32); + + // + // Check to see if useburst bit is set for this channel. + // + if(HWREG(UDMA_USEBURSTSET) & (1 << ulChannel)) + { + ulAttr |= UDMA_ATTR_USEBURST; + } + + // + // Check to see if the alternate control bit is set for this channel. + // + if(HWREG(UDMA_ALTSET) & (1 << ulChannel)) + { + ulAttr |= UDMA_ATTR_ALTSELECT; + } + + // + // Check to see if the high priority bit is set for this channel. + // + if(HWREG(UDMA_PRIOSET) & (1 << ulChannel)) + { + ulAttr |= UDMA_ATTR_HIGH_PRIORITY; + } + + // + // Check to see if the request mask bit is set for this channel. + // + if(HWREG(UDMA_REQMASKSET) & (1 << ulChannel)) + { + ulAttr |= UDMA_ATTR_REQMASK; + } + + // + // Return the configuration flags. + // + return(ulAttr); +} + +//***************************************************************************** +// +//! Sets the control parameters for a uDMA channel. +//! +//! \param ulChannel is the logical OR of the uDMA channel number with +//! \b UDMA_PRI_SELECT or \b UDMA_ALT_SELECT. +//! \param ulControl is logical OR of several control values to set the control +//! parameters for the channel. +//! +//! This function is used to set control parameters for a uDMA transfer. These +//! are typically parameters that are not changed often. +//! +//! The \e ulChannel parameter is one of the choices documented in the +//! uDMAChannelEnable() function. It should be the logical OR of the channel +//! with one of \b UDMA_PRI_SELECT or \b UDMA_ALT_SELECT to choose whether +//! the primary or alternate data structure is used. +//! +//! The \e ulControl parameter is the logical OR of five values: the data size, +//! the source address increment, the destination address increment, the +//! arbitration size, and the use burst flag. The choices available for each +//! of these values is described below. +//! +//! Choose the data size from one of \b UDMA_SIZE_8, \b UDMA_SIZE_16, or +//! \b UDMA_SIZE_32 to select a data size of 8, 16, or 32 bits. +//! +//! Choose the source address increment from one of \b UDMA_SRC_INC_8, +//! \b UDMA_SRC_INC_16, \b UDMA_SRC_INC_32, or \b UDMA_SRC_INC_NONE to select +//! an address increment of 8-bit bytes, 16-bit halfwords, 32-bit words, or +//! to select non-incrementing. +//! +//! Choose the destination address increment from one of \b UDMA_DST_INC_8, +//! \b UDMA_DST_INC_16, \b UDMA_DST_INC_32, or \b UDMA_DST_INC_NONE to select +//! an address increment of 8-bit bytes, 16-bit halfwords, 32-bit words, or +//! to select non-incrementing. +//! +//! The arbitration size determines how many items are transferred before +//! the uDMA controller re-arbitrates for the bus. Choose the arbitration size +//! from one of \b UDMA_ARB_1, \b UDMA_ARB_2, \b UDMA_ARB_4, \b UDMA_ARB_8, +//! through \b UDMA_ARB_1024 to select the arbitration size from 1 to 1024 +//! items, in powers of 2. +//! +//! The value \b UDMA_NEXT_USEBURST is used to force the channel to only +//! respond to burst requests at the tail end of a scatter-gather transfer. +//! +//! \note The address increment cannot be smaller than the data size. +//! +//! \return None. +// +//***************************************************************************** +void +uDMAChannelControlSet(unsigned long ulChannel, unsigned long ulControl) +{ + tDMAControlTable *pCtl; + + // + // Check the arguments. + // + ASSERT(ulChannel < 64); + ASSERT(HWREG(UDMA_CTLBASE) != 0); + + // + // Get the base address of the control table. + // + pCtl = (tDMAControlTable *)HWREG(UDMA_CTLBASE); + + // + // Get the current control word value and mask off the fields to be + // changed, then OR in the new settings. + // + pCtl[ulChannel].ulControl = ((pCtl[ulChannel].ulControl & + ~(UDMA_CHCTL_DSTINC_M | + UDMA_CHCTL_DSTSIZE_M | + UDMA_CHCTL_SRCINC_M | + UDMA_CHCTL_SRCSIZE_M | + UDMA_CHCTL_ARBSIZE_M | + UDMA_CHCTL_NXTUSEBURST)) | + ulControl); +} + +//***************************************************************************** +// +//! Sets the transfer parameters for a uDMA channel. +//! +//! \param ulChannel is the logical or of the uDMA channel number with either +//! \b UDMA_PRI_SELECT or \b UDMA_ALT_SELECT. +//! \param ulMode is the type of uDMA transfer. +//! \param pvSrcAddr is the source address for the transfer. +//! \param pvDstAddr is the destination address for the transfer. +//! \param ulTransferSize is the number of data items to transfer. +//! +//! This function is used to set the parameters for a uDMA transfer. These are +//! typically parameters that are changed often. The function +//! uDMAChannelControlSet() MUST be called at least once for this channel prior +//! to calling this function. +//! +//! The \e ulChannel parameter is one of the choices documented in the +//! uDMAChannelEnable() function. It should be the logical OR of the channel +//! with either \b UDMA_PRI_SELECT or \b UDMA_ALT_SELECT to choose whether the +//! primary or alternate data structure is used. +//! +//! The \e ulMode parameter should be one of the following values: +//! +//! - \b UDMA_MODE_STOP stops the uDMA transfer. The controller sets the mode +//! to this value at the end of a transfer. +//! - \b UDMA_MODE_BASIC to perform a basic transfer based on request. +//! - \b UDMA_MODE_AUTO to perform a transfer that will always complete once +//! started even if request is removed. +//! - \b UDMA_MODE_PINGPONG to set up a transfer that switches between the +//! primary and alternate control structures for the channel. This allows +//! use of ping-pong buffering for uDMA transfers. +//! - \b UDMA_MODE_MEM_SCATTER_GATHER to set up a memory scatter-gather +//! transfer. +//! - \b UDMA_MODE_PER_SCATTER_GATHER to set up a peripheral scatter-gather +//! transfer. +//! +//! The \e pvSrcAddr and \e pvDstAddr parameters are pointers to the first +//! location of the data to be transferred. These addresses should be aligned +//! according to the item size. The compiler will take care of this if the +//! pointers are pointing to storage of the appropriate data type. +//! +//! The \e ulTransferSize parameter is the number of data items, not the number +//! of bytes. +//! +//! The two scatter/gather modes, memory and peripheral, are actually different +//! depending on whether the primary or alternate control structure is +//! selected. This function will look for the \b UDMA_PRI_SELECT and +//! \b UDMA_ALT_SELECT flag along with the channel number and will set the +//! scatter/gather mode as appropriate for the primary or alternate control +//! structure. +//! +//! The channel must also be enabled using uDMAChannelEnable() after calling +//! this function. The transfer will not begin until the channel has been set +//! up and enabled. Note that the channel is automatically disabled after the +//! transfer is completed, meaning that uDMAChannelEnable() must be called +//! again after setting up the next transfer. +//! +//! \note Great care must be taken to not modify a channel control structure +//! that is in use or else the results will be unpredictable, including the +//! possibility of undesired data transfers to or from memory or peripherals. +//! For BASIC and AUTO modes, it is safe to make changes when the channel is +//! disabled, or the uDMAChannelModeGet() returns \b UDMA_MODE_STOP. For +//! PINGPONG or one of the SCATTER_GATHER modes, it is safe to modify the +//! primary or alternate control structure only when the other is being used. +//! The uDMAChannelModeGet() function will return \b UDMA_MODE_STOP when a +//! channel control structure is inactive and safe to modify. +//! +//! \return None. +// +//***************************************************************************** +void +uDMAChannelTransferSet(unsigned long ulChannel, unsigned long ulMode, + void *pvSrcAddr, void *pvDstAddr, + unsigned long ulTransferSize) +{ + tDMAControlTable *pControlTable; + unsigned long ulControl; + unsigned long ulSize; + unsigned long ulInc; + + // + // Check the arguments. + // + ASSERT(ulChannel < 64); + ASSERT(HWREG(UDMA_CTLBASE) != 0); + ASSERT(ulMode <= UDMA_MODE_PER_SCATTER_GATHER); + ASSERT((unsigned long)pvSrcAddr >= 0x20000000); + ASSERT((unsigned long)pvDstAddr >= 0x20000000); + ASSERT((ulTransferSize != 0) && (ulTransferSize <= 1024)); + + // + // Get the base address of the control table. + // + pControlTable = (tDMAControlTable *)HWREG(UDMA_CTLBASE); + + // + // Get the current control word value and mask off the mode and size + // fields. + // + ulControl = (pControlTable[ulChannel].ulControl & + ~(UDMA_CHCTL_XFERSIZE_M | UDMA_CHCTL_XFERMODE_M)); + + // + // Adjust the mode if the alt control structure is selected. + // + if(ulChannel & UDMA_ALT_SELECT) + { + if((ulMode == UDMA_MODE_MEM_SCATTER_GATHER) || + (ulMode == UDMA_MODE_PER_SCATTER_GATHER)) + { + ulMode |= UDMA_MODE_ALT_SELECT; + } + } + + // + // Set the transfer size and mode in the control word (but dont write the + // control word yet as it could kick off a transfer). + // + ulControl |= ulMode | ((ulTransferSize - 1) << 4); + + // + // Get the data item size from the control word (set previously). + // + ulSize = (ulControl & UDMA_CHCTL_DSTSIZE_M) >> 28; + + // + // Convert the transfer size to be in units of bytes. Shift (multiply) to + // get the value in bytes, based on the data item size. + // + ulTransferSize = ulTransferSize << ulSize; + + // + // Get the address increment value for the source, from the control word. + // + ulInc = (ulControl & UDMA_CHCTL_SRCINC_M); + + // + // Compute the ending source address of the transfer. If the source + // increment is set to none, then the ending address is the same as the + // beginning. + // + if(ulInc != UDMA_SRC_INC_NONE) + { + pvSrcAddr = (void *)((unsigned long)pvSrcAddr + ulTransferSize - 1); + } + + // + // Load the source ending address into the control block. + // + pControlTable[ulChannel].pvSrcEndAddr = pvSrcAddr; + + // + // Get the address increment value for the destination, from the control + // word. + // + ulInc = (ulControl & UDMA_CHCTL_DSTINC_M); + + // + // Compute the ending destination address of the transfer. If the + // destination increment is set to none, then the ending address is the + // same as the beginning. + // + if(ulInc != UDMA_DST_INC_NONE) + { + pvDstAddr = (void *)((unsigned long)pvDstAddr + ulTransferSize - 1); + } + + // + // Load the destination ending address into the control block. + // + pControlTable[ulChannel].pvDstEndAddr = pvDstAddr; + + // + // Write the new control word value. + // + pControlTable[ulChannel].ulControl = ulControl; +} + +//***************************************************************************** +// +//! Gets the current transfer size for a uDMA channel. +//! +//! \param ulChannel is the logical or of the uDMA channel number with either +//! \b UDMA_PRI_SELECT or \b UDMA_ALT_SELECT. +//! +//! This function is used to get the uDMA transfer size for a channel. The +//! transfer size is the number of items to transfer, where the size of an item +//! might be 8, 16, or 32 bits. If a partial transfer has already occurred, +//! then the number of remaining items will be returned. If the transfer is +//! complete, then 0 will be returned. +//! +//! The \e ulChannel parameter is one of the choices documented in the +//! uDMAChannelEnable() function. It should be the logical OR of the channel +//! with either \b UDMA_PRI_SELECT or \b UDMA_ALT_SELECT to choose whether +//! the primary or alternate data structure is used. +//! +//! \return Returns the number of items remaining to transfer. +// +//***************************************************************************** +unsigned long +uDMAChannelSizeGet(unsigned long ulChannel) +{ + tDMAControlTable *pControlTable; + unsigned long ulControl; + + // + // Check the arguments. + // + ASSERT(ulChannel < 64); + ASSERT(HWREG(UDMA_CTLBASE) != 0); + + // + // Get the base address of the control table. + // + pControlTable = (tDMAControlTable *)HWREG(UDMA_CTLBASE); + + // + // Get the current control word value and mask off all but the size field + // and the mode field. + // + ulControl = pControlTable[ulChannel].ulControl & + (UDMA_CHCTL_XFERSIZE_M | UDMA_CHCTL_XFERMODE_M); + + // + // If the size field and mode field are 0 then the transfer is finished + // and there are no more items to transfer + // + if(ulControl == 0) + { + return(0); + } + + // + // Otherwise, if either the size field or more field is non-zero, then + // not all the items have been transferred. + // + else + { + // + // Shift the size field and add one, then return to user. + // + return((ulControl >> 4) + 1); + } +} + +//***************************************************************************** +// +//! Gets the transfer mode for a uDMA channel. +//! +//! \param ulChannel is the logical or of the uDMA channel number with either +//! \b UDMA_PRI_SELECT or \b UDMA_ALT_SELECT. +//! +//! This function is used to get the transfer mode for the uDMA channel. It +//! can be used to query the status of a transfer on a channel. When the +//! transfer is complete the mode will be \b UDMA_MODE_STOP. +//! +//! The \e ulChannel parameter is one of the choices documented in the +//! uDMAChannelEnable() function. It should be the logical OR of the channel +//! with either \b UDMA_PRI_SELECT or \b UDMA_ALT_SELECT to choose whether the +//! primary or alternate data structure is used. +//! +//! \return Returns the transfer mode of the specified channel and control +//! structure, which will be one of the following values: \b UDMA_MODE_STOP, +//! \b UDMA_MODE_BASIC, \b UDMA_MODE_AUTO, \b UDMA_MODE_PINGPONG, +//! \b UDMA_MODE_MEM_SCATTER_GATHER, or \b UDMA_MODE_PER_SCATTER_GATHER. +// +//***************************************************************************** +unsigned long +uDMAChannelModeGet(unsigned long ulChannel) +{ + tDMAControlTable *pControlTable; + unsigned long ulControl; + + // + // Check the arguments. + // + ASSERT(ulChannel < 64); + ASSERT(HWREG(UDMA_CTLBASE) != 0); + + // + // Get the base address of the control table. + // + pControlTable = (tDMAControlTable *)HWREG(UDMA_CTLBASE); + + // + // Get the current control word value and mask off all but the mode field. + // + ulControl = pControlTable[ulChannel].ulControl & UDMA_CHCTL_XFERMODE_M; + + // + // Check if scatter/gather mode, and if so, mask off the alt bit. + // + if(((ulControl & ~UDMA_MODE_ALT_SELECT) == UDMA_MODE_MEM_SCATTER_GATHER) || + ((ulControl & ~UDMA_MODE_ALT_SELECT) == UDMA_MODE_PER_SCATTER_GATHER)) + { + ulControl &= ~UDMA_MODE_ALT_SELECT; + } + + // + // Return the mode to the caller. + // + return(ulControl); +} + +//***************************************************************************** +// +//! Selects the secondary peripheral for a set of uDMA channels. +//! +//! \param ulSecPeriphs is the logical or of the uDMA channels for which to +//! use the secondary peripheral, instead of the default peripheral. +//! +//! This function is used to select the secondary peripheral assignment for +//! a set of uDMA channels. By selecting the secondary peripheral assignment +//! for a channel, the default peripheral assignment is no longer available +//! for that channel. +//! +//! The parameter \e ulSecPeriphs can be the logical OR of any of the +//! following macros. If one of the macros below is in the list passed +//! to this function, then the secondary peripheral (marked as \b _SEC_) +//! will be selected. +//! +//! - \b UDMA_DEF_USBEP1RX_SEC_UART2RX +//! - \b UDMA_DEF_USBEP1TX_SEC_UART2TX +//! - \b UDMA_DEF_USBEP2RX_SEC_TMR3A +//! - \b UDMA_DEF_USBEP2TX_SEC_TMR3B +//! - \b UDMA_DEF_USBEP3RX_SEC_TMR2A +//! - \b UDMA_DEF_USBEP3TX_SEC_TMR2B +//! - \b UDMA_DEF_ETH0RX_SEC_TMR2A +//! - \b UDMA_DEF_ETH0TX_SEC_TMR2B +//! - \b UDMA_DEF_UART0RX_SEC_UART1RX +//! - \b UDMA_DEF_UART0TX_SEC_UART1TX +//! - \b UDMA_DEF_SSI0RX_SEC_SSI1RX +//! - \b UDMA_DEF_SSI0TX_SEC_SSI1TX +//! - \b UDMA_DEF_RESERVED_SEC_UART2RX +//! - \b UDMA_DEF_RESERVED_SEC_UART2TX +//! - \b UDMA_DEF_ADC00_SEC_TMR2A +//! - \b UDMA_DEF_ADC01_SEC_TMR2B +//! - \b UDMA_DEF_ADC02_SEC_RESERVED +//! - \b UDMA_DEF_ADC03_SEC_RESERVED +//! - \b UDMA_DEF_TMR0A_SEC_TMR1A +//! - \b UDMA_DEF_TMR0B_SEC_TMR1B +//! - \b UDMA_DEF_TMR1A_SEC_EPI0RX +//! - \b UDMA_DEF_TMR1B_SEC_EPI0TX +//! - \b UDMA_DEF_UART1RX_SEC_RESERVED +//! - \b UDMA_DEF_UART1TX_SEC_RESERVED +//! - \b UDMA_DEF_SSI1RX_SEC_ADC10 +//! - \b UDMA_DEF_SSI1TX_SEC_ADC11 +//! - \b UDMA_DEF_RESERVED_SEC_ADC12 +//! - \b UDMA_DEF_RESERVED_SEC_ADC13 +//! - \b UDMA_DEF_I2S0RX_SEC_RESERVED +//! - \b UDMA_DEF_I2S0TX_SEC_RESERVED +//! +//! \return None. +// +//***************************************************************************** +void +uDMAChannelSelectSecondary(unsigned long ulSecPeriphs) +{ + // + // Select the secondary peripheral for the specified channels. + // + HWREG(UDMA_CHALT) |= ulSecPeriphs; +} + +//***************************************************************************** +// +//! Selects the default peripheral for a set of uDMA channels. +//! +//! \param ulDefPeriphs is the logical or of the uDMA channels for which to +//! use the default peripheral, instead of the secondary peripheral. +//! +//! This function is used to select the default peripheral assignment for +//! a set of uDMA channels. +//! +//! The parameter \e ulDefPeriphs can be the logical OR of any of the +//! following macros. If one of the macros below is in the list passed +//! to this function, then the default peripheral (marked as \b _DEF_) +//! will be selected. +//! +//! - \b UDMA_DEF_USBEP1RX_SEC_UART2RX +//! - \b UDMA_DEF_USBEP1TX_SEC_UART2TX +//! - \b UDMA_DEF_USBEP2RX_SEC_TMR3A +//! - \b UDMA_DEF_USBEP2TX_SEC_TMR3B +//! - \b UDMA_DEF_USBEP3RX_SEC_TMR2A +//! - \b UDMA_DEF_USBEP3TX_SEC_TMR2B +//! - \b UDMA_DEF_ETH0RX_SEC_TMR2A +//! - \b UDMA_DEF_ETH0TX_SEC_TMR2B +//! - \b UDMA_DEF_UART0RX_SEC_UART1RX +//! - \b UDMA_DEF_UART0TX_SEC_UART1TX +//! - \b UDMA_DEF_SSI0RX_SEC_SSI1RX +//! - \b UDMA_DEF_SSI0TX_SEC_SSI1TX +//! - \b UDMA_DEF_RESERVED_SEC_UART2RX +//! - \b UDMA_DEF_RESERVED_SEC_UART2TX +//! - \b UDMA_DEF_ADC00_SEC_TMR2A +//! - \b UDMA_DEF_ADC01_SEC_TMR2B +//! - \b UDMA_DEF_ADC02_SEC_RESERVED +//! - \b UDMA_DEF_ADC03_SEC_RESERVED +//! - \b UDMA_DEF_TMR0A_SEC_TMR1A +//! - \b UDMA_DEF_TMR0B_SEC_TMR1B +//! - \b UDMA_DEF_TMR1A_SEC_EPI0RX +//! - \b UDMA_DEF_TMR1B_SEC_EPI0TX +//! - \b UDMA_DEF_UART1RX_SEC_RESERVED +//! - \b UDMA_DEF_UART1TX_SEC_RESERVED +//! - \b UDMA_DEF_SSI1RX_SEC_ADC10 +//! - \b UDMA_DEF_SSI1TX_SEC_ADC11 +//! - \b UDMA_DEF_RESERVED_SEC_ADC12 +//! - \b UDMA_DEF_RESERVED_SEC_ADC13 +//! - \b UDMA_DEF_I2S0RX_SEC_RESERVED +//! - \b UDMA_DEF_I2S0TX_SEC_RESERVED +//! +//! \return None. +// +//***************************************************************************** +void +uDMAChannelSelectDefault(unsigned long ulDefPeriphs) +{ + // + // Select the default peripheral for the specified channels. + // + HWREG(UDMA_CHALT) &= ~ulDefPeriphs; +} + +//***************************************************************************** +// +//! Registers an interrupt handler for the uDMA controller. +//! +//! \param ulIntChannel identifies which uDMA interrupt is to be registered. +//! \param pfnHandler is a pointer to the function to be called when the +//! interrupt is activated. +//! +//! This sets and enables the handler to be called when the uDMA controller +//! generates an interrupt. The \e ulIntChannel parameter should be one of the +//! following: +//! +//! - \b UDMA_INT_SW to register an interrupt handler to process interrupts +//! from the uDMA software channel (UDMA_CHANNEL_SW) +//! - \b UDMA_INT_ERR to register an interrupt handler to process uDMA error +//! interrupts +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \note The interrupt handler for uDMA is for transfer completion when the +//! channel UDMA_CHANNEL_SW is used, and for error interrupts. The +//! interrupts for each peripheral channel are handled through the individual +//! peripheral interrupt handlers. +//! +//! \return None. +// +//***************************************************************************** +void +uDMAIntRegister(unsigned long ulIntChannel, void (*pfnHandler)(void)) +{ + // + // Check the arguments. + // + ASSERT(pfnHandler); + ASSERT((ulIntChannel == UDMA_INT_SW) || (ulIntChannel == UDMA_INT_ERR)); + + // + // Register the interrupt handler. + // + IntRegister(ulIntChannel, pfnHandler); + + // + // Enable the memory management fault. + // + IntEnable(ulIntChannel); +} + +//***************************************************************************** +// +//! Unregisters an interrupt handler for the uDMA controller. +//! +//! \param ulIntChannel identifies which uDMA interrupt to unregister. +//! +//! This function will disable and clear the handler to be called for the +//! specified uDMA interrupt. The \e ulIntChannel parameter should be one of +//! \b UDMA_INT_SW or \b UDMA_INT_ERR as documented for the function +//! uDMAIntRegister(). +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +uDMAIntUnregister(unsigned long ulIntChannel) +{ + // + // Disable the interrupt. + // + IntDisable(ulIntChannel); + + // + // Unregister the interrupt handler. + // + IntUnregister(ulIntChannel); +} + +//***************************************************************************** +// +// Close the Doxygen group. +//! @} +// +//***************************************************************************** diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/udma.h b/bsp/lm3s_9b9x/Libraries/driverlib/udma.h new file mode 100644 index 0000000000000000000000000000000000000000..8f3fdf540ecbd0d4767220c6d9c6e2cc6d373f53 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/udma.h @@ -0,0 +1,333 @@ +//***************************************************************************** +// +// udma.h - Prototypes and macros for the uDMA controller. +// +// Copyright (c) 2007-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +#ifndef __UDMA_H__ +#define __UDMA_H__ + +//***************************************************************************** +// +// If building with a C++ compiler, make all of the definitions in this header +// have a C binding. +// +//***************************************************************************** +#ifdef __cplusplus +extern "C" +{ +#endif + +//***************************************************************************** +// +// A structure that defines an entry in the channel control table. These +// fields are used by the uDMA controller and normally it is not necessary for +// software to directly read or write fields in the table. +// +//***************************************************************************** +typedef struct +{ + // + // The ending source address of the data transfer. + // + volatile void *pvSrcEndAddr; + + // + // The ending destination address of the data transfer. + // + volatile void *pvDstEndAddr; + + // + // The channel control mode. + // + volatile unsigned long ulControl; + + // + // An unused location. + // + volatile unsigned long ulSpare; +} +tDMAControlTable; + +//***************************************************************************** +// +// Flags that can be passed to uDMAChannelAttributeEnable(), +// uDMAChannelAttributeDisable(), and returned from uDMAChannelAttributeGet(). +// +//***************************************************************************** +#define UDMA_ATTR_USEBURST 0x00000001 +#define UDMA_ATTR_ALTSELECT 0x00000002 +#define UDMA_ATTR_HIGH_PRIORITY 0x00000004 +#define UDMA_ATTR_REQMASK 0x00000008 +#define UDMA_ATTR_ALL 0x0000000F + +//***************************************************************************** +// +// DMA control modes that can be passed to uDMAModeSet() and returned +// uDMAModeGet(). +// +//***************************************************************************** +#define UDMA_MODE_STOP 0x00000000 +#define UDMA_MODE_BASIC 0x00000001 +#define UDMA_MODE_AUTO 0x00000002 +#define UDMA_MODE_PINGPONG 0x00000003 +#define UDMA_MODE_MEM_SCATTER_GATHER \ + 0x00000004 +#define UDMA_MODE_PER_SCATTER_GATHER \ + 0x00000006 +#define UDMA_MODE_ALT_SELECT 0x00000001 + +//***************************************************************************** +// +// Channel configuration values that can be passed to uDMAControlSet(). +// +//***************************************************************************** +#define UDMA_DST_INC_8 0x00000000 +#define UDMA_DST_INC_16 0x40000000 +#define UDMA_DST_INC_32 0x80000000 +#define UDMA_DST_INC_NONE 0xc0000000 +#define UDMA_SRC_INC_8 0x00000000 +#define UDMA_SRC_INC_16 0x04000000 +#define UDMA_SRC_INC_32 0x08000000 +#define UDMA_SRC_INC_NONE 0x0c000000 +#define UDMA_SIZE_8 0x00000000 +#define UDMA_SIZE_16 0x11000000 +#define UDMA_SIZE_32 0x22000000 +#define UDMA_ARB_1 0x00000000 +#define UDMA_ARB_2 0x00004000 +#define UDMA_ARB_4 0x00008000 +#define UDMA_ARB_8 0x0000c000 +#define UDMA_ARB_16 0x00010000 +#define UDMA_ARB_32 0x00014000 +#define UDMA_ARB_64 0x00018000 +#define UDMA_ARB_128 0x0001c000 +#define UDMA_ARB_256 0x00020000 +#define UDMA_ARB_512 0x00024000 +#define UDMA_ARB_1024 0x00028000 +#define UDMA_NEXT_USEBURST 0x00000008 + +//***************************************************************************** +// +// Channel numbers to be passed to API functions that require a channel number +// ID. +// +//***************************************************************************** +#define UDMA_CHANNEL_USBEP1RX 0 +#define UDMA_CHANNEL_USBEP1TX 1 +#define UDMA_CHANNEL_USBEP2RX 2 +#define UDMA_CHANNEL_USBEP2TX 3 +#define UDMA_CHANNEL_USBEP3RX 4 +#define UDMA_CHANNEL_USBEP3TX 5 +#define UDMA_CHANNEL_ETH0RX 6 +#define UDMA_CHANNEL_ETH0TX 7 +#define UDMA_CHANNEL_UART0RX 8 +#define UDMA_CHANNEL_UART0TX 9 +#define UDMA_CHANNEL_SSI0RX 10 +#define UDMA_CHANNEL_SSI0TX 11 +#define UDMA_CHANNEL_ADC0 14 +#define UDMA_CHANNEL_ADC1 15 +#define UDMA_CHANNEL_ADC2 16 +#define UDMA_CHANNEL_ADC3 17 +#define UDMA_CHANNEL_TMR0A 18 +#define UDMA_CHANNEL_TMR0B 19 +#define UDMA_CHANNEL_TMR1A 20 +#define UDMA_CHANNEL_TMR1B 21 +#define UDMA_CHANNEL_UART1RX 22 +#define UDMA_CHANNEL_UART1TX 23 +#define UDMA_CHANNEL_SSI1RX 24 +#define UDMA_CHANNEL_SSI1TX 25 +#define UDMA_CHANNEL_I2S0RX 28 +#define UDMA_CHANNEL_I2S0TX 29 +#define UDMA_CHANNEL_SW 30 + +//***************************************************************************** +// +// Flags to be OR'd with the channel ID to indicate if the primary or alternate +// control structure should be used. +// +//***************************************************************************** +#define UDMA_PRI_SELECT 0x00000000 +#define UDMA_ALT_SELECT 0x00000020 + +//***************************************************************************** +// +// uDMA interrupt sources, to be passed to uDMAIntRegister() and +// uDMAIntUnregister(). +// +//***************************************************************************** +#define UDMA_INT_SW 62 +#define UDMA_INT_ERR 63 + +//***************************************************************************** +// +// Channel numbers to be passed to API functions that require a channel number +// ID. These are for secondary peripheral assignments. +// +//***************************************************************************** +#define UDMA_SEC_CHANNEL_UART2RX_0 \ + 0 +#define UDMA_SEC_CHANNEL_UART2TX_1 \ + 1 +#define UDMA_SEC_CHANNEL_TMR3A 2 +#define UDMA_SEC_CHANNEL_TMR3B 3 +#define UDMA_SEC_CHANNEL_TMR2A_4 \ + 4 +#define UDMA_SEC_CHANNEL_TMR2B_5 \ + 5 +#define UDMA_SEC_CHANNEL_TMR2A_6 \ + 6 +#define UDMA_SEC_CHANNEL_TMR2B_7 \ + 7 +#define UDMA_SEC_CHANNEL_UART1RX \ + 8 +#define UDMA_SEC_CHANNEL_UART1TX \ + 9 +#define UDMA_SEC_CHANNEL_SSI1RX 10 +#define UDMA_SEC_CHANNEL_SSI1TX 11 +#define UDMA_SEC_CHANNEL_UART2RX_12 \ + 12 +#define UDMA_SEC_CHANNEL_UART2TX_13 \ + 13 +#define UDMA_SEC_CHANNEL_TMR2A_14 \ + 14 +#define UDMA_SEC_CHANNEL_TMR2B_15 \ + 15 +#define UDMA_SEC_CHANNEL_TMR1A 18 +#define UDMA_SEC_CHANNEL_TMR1B 19 +#define UDMA_SEC_CHANNEL_EPI0RX 20 +#define UDMA_SEC_CHANNEL_EPI0TX 21 +#define UDMA_SEC_CHANNEL_ADC10 24 +#define UDMA_SEC_CHANNEL_ADC11 25 +#define UDMA_SEC_CHANNEL_ADC12 26 +#define UDMA_SEC_CHANNEL_ADC13 27 +#define UDMA_SEC_CHANNEL_SW 30 + +//***************************************************************************** +// +// uDMA default/secondary peripheral selections, to be passed to +// uDMAChannelSelectSecondary() and uDMAChannelSelectDefault(). +// +//***************************************************************************** +#define UDMA_DEF_USBEP1RX_SEC_UART2RX \ + 0x00000001 +#define UDMA_DEF_USBEP1TX_SEC_UART2TX \ + 0x00000002 +#define UDMA_DEF_USBEP2RX_SEC_TMR3A \ + 0x00000004 +#define UDMA_DEF_USBEP2TX_SEC_TMR3B \ + 0x00000008 +#define UDMA_DEF_USBEP3RX_SEC_TMR2A \ + 0x00000010 +#define UDMA_DEF_USBEP3TX_SEC_TMR2B \ + 0x00000020 +#define UDMA_DEF_ETH0RX_SEC_TMR2A \ + 0x00000040 +#define UDMA_DEF_ETH0TX_SEC_TMR2B \ + 0x00000080 +#define UDMA_DEF_UART0RX_SEC_UART1RX \ + 0x00000100 +#define UDMA_DEF_UART0TX_SEC_UART1TX \ + 0x00000200 +#define UDMA_DEF_SSI0RX_SEC_SSI1RX \ + 0x00000400 +#define UDMA_DEF_SSI0TX_SEC_SSI1TX \ + 0x00000800 +#define UDMA_DEF_RESERVED_SEC_UART2RX \ + 0x00001000 +#define UDMA_DEF_RESERVED_SEC_UART2TX \ + 0x00002000 +#define UDMA_DEF_ADC00_SEC_TMR2A \ + 0x00004000 +#define UDMA_DEF_ADC01_SEC_TMR2B \ + 0x00008000 +#define UDMA_DEF_ADC02_SEC_RESERVED \ + 0x00010000 +#define UDMA_DEF_ADC03_SEC_RESERVED \ + 0x00020000 +#define UDMA_DEF_TMR0A_SEC_TMR1A \ + 0x00040000 +#define UDMA_DEF_TMR0B_SEC_TMR1B \ + 0x00080000 +#define UDMA_DEF_TMR1A_SEC_EPI0RX \ + 0x00100000 +#define UDMA_DEF_TMR1B_SEC_EPI0TX \ + 0x00200000 +#define UDMA_DEF_UART1RX_SEC_RESERVED \ + 0x00400000 +#define UDMA_DEF_UART1TX_SEC_RESERVED \ + 0x00800000 +#define UDMA_DEF_SSI1RX_SEC_ADC10 \ + 0x01000000 +#define UDMA_DEF_SSI1TX_SEC_ADC11 \ + 0x02000000 +#define UDMA_DEF_RESERVED_SEC_ADC12 \ + 0x04000000 +#define UDMA_DEF_RESERVED_SEC_ADC13 \ + 0x08000000 +#define UDMA_DEF_I2S0RX_SEC_RESERVED \ + 0x10000000 +#define UDMA_DEF_I2S0TX_SEC_RESERVED \ + 0x20000000 + +//***************************************************************************** +// +// API Function prototypes +// +//***************************************************************************** +extern void uDMAEnable(void); +extern void uDMADisable(void); +extern unsigned long uDMAErrorStatusGet(void); +extern void uDMAErrorStatusClear(void); +extern void uDMAChannelEnable(unsigned long ulChannel); +extern void uDMAChannelDisable(unsigned long ulChannel); +extern tBoolean uDMAChannelIsEnabled(unsigned long ulChannel); +extern void uDMAControlBaseSet(void *pControlTable); +extern void *uDMAControlBaseGet(void); +extern void uDMAChannelRequest(unsigned long ulChannel); +extern void uDMAChannelAttributeEnable(unsigned long ulChannel, + unsigned long ulAttr); +extern void uDMAChannelAttributeDisable(unsigned long ulChannel, + unsigned long ulAttr); +extern unsigned long uDMAChannelAttributeGet(unsigned long ulChannel); +extern void uDMAChannelControlSet(unsigned long ulChannel, + unsigned long ulControl); +extern void uDMAChannelTransferSet(unsigned long ulChannel, + unsigned long ulMode, void *pvSrcAddr, + void *pvDstAddr, + unsigned long ulTransferSize); +extern unsigned long uDMAChannelSizeGet(unsigned long ulChannel); +extern unsigned long uDMAChannelModeGet(unsigned long ulChannel); +extern void uDMAIntRegister(unsigned long ulIntChannel, + void (*pfnHandler)(void)); +extern void uDMAIntUnregister(unsigned long ulIntChannel); +extern void uDMAChannelSelectDefault(unsigned long ulDefPeriphs); +extern void uDMAChannelSelectSecondary(unsigned long ulSecPeriphs); + +//***************************************************************************** +// +// Mark the end of the C bindings section for C++ compilers. +// +//***************************************************************************** +#ifdef __cplusplus +} +#endif + +#endif // __UDMA_H__ diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/usb.c b/bsp/lm3s_9b9x/Libraries/driverlib/usb.c new file mode 100644 index 0000000000000000000000000000000000000000..9df7d83f1536f71eccc65707a50068380d89314d --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/usb.c @@ -0,0 +1,3825 @@ +//***************************************************************************** +// +// usb.c - Driver for the USB Interface. +// +// Copyright (c) 2007-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +//***************************************************************************** +// +//! \addtogroup usb_api +//! @{ +// +//***************************************************************************** + +#include "inc/hw_ints.h" +#include "inc/hw_memmap.h" +#include "inc/hw_types.h" +#include "inc/hw_usb.h" +#include "driverlib/debug.h" +#include "driverlib/interrupt.h" +#include "driverlib/udma.h" +#include "driverlib/usb.h" + +//***************************************************************************** +// +// Amount to shift the RX interrupt sources by in the flags used in the +// interrupt calls. +// +//***************************************************************************** +#ifndef DEPRECATED +#define USB_INT_RX_SHIFT 8 +#endif +#define USB_INTEP_RX_SHIFT 16 + +//***************************************************************************** +// +// Amount to shift the status interrupt sources by in the flags used in the +// interrupt calls. +// +//***************************************************************************** +#ifndef DEPRECATED +#define USB_INT_STATUS_SHIFT 24 +#endif + +//***************************************************************************** +// +// Amount to shift the RX endpoint status sources by in the flags used in the +// calls. +// +//***************************************************************************** +#define USB_RX_EPSTATUS_SHIFT 16 + +//***************************************************************************** +// +// Converts from an endpoint specifier to the offset of the endpoint's +// control/status registers. +// +//***************************************************************************** +#define EP_OFFSET(Endpoint) (Endpoint - 0x10) + +//***************************************************************************** +// +// Sets one of the indexed registers. +// +// \param ulBase specifies the USB module base address. +// \param ulEndpoint is the endpoint index to target for this write. +// \param ulIndexedReg is the indexed register to write to. +// \param ucValue is the value to write to the register. +// +// This function is used to access the indexed registers for each endpoint. +// The only registers that are indexed are the FIFO configuration registers +// which are not used after configuration. +// +// \return None. +// +//***************************************************************************** +static void +USBIndexWrite(unsigned long ulBase, unsigned long ulEndpoint, + unsigned long ulIndexedReg, unsigned long ulValue, + unsigned long ulSize) +{ + unsigned long ulIndex; + + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + ASSERT((ulEndpoint == 0) || (ulEndpoint == 1) || (ulEndpoint == 2) || + (ulEndpoint == 3)); + ASSERT((ulSize == 1) || (ulSize == 2)); + + // + // Save the old index in case it was in use. + // + ulIndex = HWREGB(ulBase + USB_O_EPIDX); + + // + // Set the index. + // + HWREGB(ulBase + USB_O_EPIDX) = ulEndpoint; + + // + // Determine the size of the register value. + // + if(ulSize == 1) + { + // + // Set the value. + // + HWREGB(ulBase + ulIndexedReg) = ulValue; + } + else + { + // + // Set the value. + // + HWREGH(ulBase + ulIndexedReg) = ulValue; + } + + // + // Restore the old index in case it was in use. + // + HWREGB(ulBase + USB_O_EPIDX) = ulIndex; +} + +//***************************************************************************** +// +// Reads one of the indexed registers. +// +// \param ulBase specifies the USB module base address. +// \param ulEndpoint is the endpoint index to target for this write. +// \param ulIndexedReg is the indexed register to write to. +// +// This function is used internally to access the indexed registers for each +// endpoint. The only registers that are indexed are the FIFO configuration +// registers which are not used after configuration. +// +// \return The value in the register requested. +// +//***************************************************************************** +static unsigned long +USBIndexRead(unsigned long ulBase, unsigned long ulEndpoint, + unsigned long ulIndexedReg, unsigned long ulSize) +{ + unsigned char ulIndex; + unsigned char ulValue; + + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + ASSERT((ulEndpoint == 0) || (ulEndpoint == 1) || (ulEndpoint == 2) || + (ulEndpoint == 3)); + ASSERT((ulSize == 1) || (ulSize == 2)); + + // + // Save the old index in case it was in use. + // + ulIndex = HWREGB(ulBase + USB_O_EPIDX); + + // + // Set the index. + // + HWREGB(ulBase + USB_O_EPIDX) = ulEndpoint; + + // + // Determine the size of the register value. + // + if(ulSize == 1) + { + // + // Get the value. + // + ulValue = HWREGB(ulBase + ulIndexedReg); + } + else + { + // + // Get the value. + // + ulValue = HWREGH(ulBase + ulIndexedReg); + } + + // + // Restore the old index in case it was in use. + // + HWREGB(ulBase + USB_O_EPIDX) = ulIndex; + + // + // Return the register's value. + // + return(ulValue); +} + +//***************************************************************************** +// +//! Puts the USB bus in a suspended state. +//! +//! \param ulBase specifies the USB module base address. +//! +//! When used in host mode, this function will put the USB bus in the suspended +//! state. +//! +//! \note This function should only be called in host mode. +//! +//! \return None. +// +//***************************************************************************** +void +USBHostSuspend(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + + // + // Send the suspend signaling to the USB bus. + // + HWREGB(ulBase + USB_O_POWER) |= USB_POWER_SUSPEND; +} + +//***************************************************************************** +// +//! Handles the USB bus reset condition. +//! +//! \param ulBase specifies the USB module base address. +//! \param bStart specifies whether to start or stop signaling reset on the USB +//! bus. +//! +//! When this function is called with the \e bStart parameter set to \b true, +//! this function will cause the start of a reset condition on the USB bus. +//! The caller should then delay at least 20ms before calling this function +//! again with the \e bStart parameter set to \b false. +//! +//! \note This function should only be called in host mode. +//! +//! \return None. +// +//***************************************************************************** +void +USBHostReset(unsigned long ulBase, tBoolean bStart) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + + // + // Send a reset signal to the bus. + // + if(bStart) + { + HWREGB(ulBase + USB_O_POWER) |= USB_POWER_RESET; + } + else + { + HWREGB(ulBase + USB_O_POWER) &= ~USB_POWER_RESET; + } +} + +//***************************************************************************** +// +//! Handles the USB bus resume condition. +//! +//! \param ulBase specifies the USB module base address. +//! \param bStart specifies if the USB controller is entering or leaving the +//! resume signaling state. +//! +//! When in device mode this function will bring the USB controller out of the +//! suspend state. This call should first be made with the \e bStart parameter +//! set to \b true to start resume signaling. The device application should +//! then delay at least 10ms but not more than 15ms before calling this +//! function with the \e bStart parameter set to \b false. +//! +//! When in host mode this function will signal devices to leave the suspend +//! state. This call should first be made with the \e bStart parameter set to +//! \b true to start resume signaling. The host application should then delay +//! at least 20ms before calling this function with the \e bStart parameter set +//! to \b false. This will cause the controller to complete the resume +//! signaling on the USB bus. +//! +//! \return None. +// +//***************************************************************************** +void +USBHostResume(unsigned long ulBase, tBoolean bStart) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + + // + // Send a resume signal to the bus. + // + if(bStart) + { + HWREGB(ulBase + USB_O_POWER) |= USB_POWER_RESUME; + } + else + { + HWREGB(ulBase + USB_O_POWER) &= ~USB_POWER_RESUME; + } +} + +//***************************************************************************** +// +//! Returns the current speed of the USB device connected. +//! +//! \param ulBase specifies the USB module base address. +//! +//! This function will return the current speed of the USB bus. +//! +//! \note This function should only be called in host mode. +//! +//! \return Returns either \b USB_LOW_SPEED, \b USB_FULL_SPEED, or +//! \b USB_UNDEF_SPEED. +// +//***************************************************************************** +unsigned long +USBHostSpeedGet(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + + // + // If the Full Speed device bit is set, then this is a full speed device. + // + if(HWREGB(ulBase + USB_O_DEVCTL) & USB_DEVCTL_FSDEV) + { + return(USB_FULL_SPEED); + } + + // + // If the Low Speed device bit is set, then this is a low speed device. + // + if(HWREGB(ulBase + USB_O_DEVCTL) & USB_DEVCTL_LSDEV) + { + return(USB_LOW_SPEED); + } + + // + // The device speed is not known. + // + return(USB_UNDEF_SPEED); +} + +//***************************************************************************** +// +//! Returns the status of the USB interrupts. +//! +//! \param ulBase specifies the USB module base address. +//! +//! This function will read the source of the interrupt for the USB controller. +//! There are three groups of interrupt sources, IN Endpoints, OUT Endpoints, +//! and general status changes. This call will return the current status for +//! all of these interrupts. The bit values returned should be compared +//! against the \b USB_HOST_IN, \b USB_HOST_OUT, \b USB_HOST_EP0, +//! \b USB_DEV_IN, \b USB_DEV_OUT, and \b USB_DEV_EP0 values. +//! +//! \note This call will clear the source of all of the general status +//! interrupts. +//! +//! \note WARNING: This API cannot be used on endpoint numbers greater than +//! endpoint 3 so USBIntStatusControl() or USBIntStatusEndpoint() should be +//! used instead. +//! +//! \return Returns the status of the sources for the USB controller's +//! interrupt. +// +//***************************************************************************** +#ifndef DEPRECATED +unsigned long +USBIntStatus(unsigned long ulBase) +{ + unsigned long ulStatus; + + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + + // + // Get the transmit interrupt status. + // + ulStatus = (HWREGB(ulBase + USB_O_TXIS)); + + // + // Get the receive interrupt status, these bits go into the second byte of + // the returned value. + // + ulStatus |= (HWREGB(ulBase + USB_O_RXIS) << USB_INT_RX_SHIFT); + + // + // Get the general interrupt status, these bits go into the upper 8 bits + // of the returned value. + // + ulStatus |= (HWREGB(ulBase + USB_O_IS) << USB_INT_STATUS_SHIFT); + + // + // Add the power fault status. + // + if(HWREG(ulBase + USB_O_EPCISC) & USB_EPCISC_PF) + { + // + // Indicate a power fault was detected. + // + ulStatus |= USB_INT_POWER_FAULT; + + // + // Clear the power fault interrupt. + // + HWREGB(ulBase + USB_O_EPCISC) |= USB_EPCISC_PF; + } + + if(HWREG(USB0_BASE + USB_O_IDVISC) & USB_IDVRIS_ID) + { + // + // Indicate a id detection was detected. + // + ulStatus |= USB_INT_MODE_DETECT; + + // + // Clear the id detection interrupt. + // + HWREG(USB0_BASE + USB_O_IDVISC) |= USB_IDVRIS_ID; + } + + // + // Return the combined interrupt status. + // + return(ulStatus); +} +#endif + +//***************************************************************************** +// +//! Disables the sources for USB interrupts. +//! +//! \param ulBase specifies the USB module base address. +//! \param ulFlags specifies which interrupts to disable. +//! +//! This function will disable the USB controller from generating the +//! interrupts indicated by the \e ulFlags parameter. There are three groups +//! of interrupt sources, IN Endpoints, OUT Endpoints, and general status +//! changes, specified by \b USB_INT_HOST_IN, \b USB_INT_HOST_OUT, +//! \b USB_INT_DEV_IN, \b USB_INT_DEV_OUT, and \b USB_INT_STATUS. If +//! \b USB_INT_ALL is specified then all interrupts will be disabled. +//! +//! \note WARNING: This API cannot be used on endpoint numbers greater than +//! endpoint 3 so USBIntDisableControl() or USBIntDisableEndpoint() should be +//! used instead. +//! +//! \return None. +// +//***************************************************************************** +#ifndef DEPRECATED +void +USBIntDisable(unsigned long ulBase, unsigned long ulFlags) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + ASSERT((ulFlags & ~(USB_INT_ALL)) == 0); + + // + // If any transmit interrupts were disabled then write the transmit + // interrupt settings out to the hardware. + // + if(ulFlags & (USB_INT_HOST_OUT | USB_INT_DEV_IN | USB_INT_EP0)) + { + HWREGH(ulBase + USB_O_TXIE) &= + ~(ulFlags & (USB_INT_HOST_OUT | USB_INT_DEV_IN | USB_INT_EP0)); + } + + // + // If any receive interrupts were disabled then write the receive interrupt + // settings out to the hardware. + // + if(ulFlags & (USB_INT_HOST_IN | USB_INT_DEV_OUT)) + { + HWREGH(ulBase + USB_O_RXIE) &= + ~((ulFlags & (USB_INT_HOST_IN | USB_INT_DEV_OUT)) >> + USB_INT_RX_SHIFT); + } + + // + // If any general interrupts were disabled then write the general interrupt + // settings out to the hardware. + // + if(ulFlags & USB_INT_STATUS) + { + HWREGB(ulBase + USB_O_IE) &= + ~((ulFlags & USB_INT_STATUS) >> USB_INT_STATUS_SHIFT); + } + + // + // Disable the power fault interrupt. + // + if(ulFlags & USB_INT_POWER_FAULT) + { + HWREG(ulBase + USB_O_EPCIM) = 0; + } + + // + // Disable the ID pin detect interrupt. + // + if(ulFlags & USB_INT_MODE_DETECT) + { + HWREG(USB0_BASE + USB_O_IDVIM) = 0; + } +} +#endif + +//***************************************************************************** +// +//! Enables the sources for USB interrupts. +//! +//! \param ulBase specifies the USB module base address. +//! \param ulFlags specifies which interrupts to enable. +//! +//! This function will enable the USB controller's ability to generate the +//! interrupts indicated by the \e ulFlags parameter. There are three +//! groups of interrupt sources, IN Endpoints, OUT Endpoints, and +//! general status changes, specified by \b USB_INT_HOST_IN, +//! \b USB_INT_HOST_OUT, \b USB_INT_DEV_IN, \b USB_INT_DEV_OUT, and +//! \b USB_STATUS. If \b USB_INT_ALL is specified then all interrupts will be +//! enabled. +//! +//! \note A call must be made to enable the interrupt in the main interrupt +//! controller to receive interrupts. The USBIntRegister() API performs this +//! controller level interrupt enable. However if static interrupt handlers +//! are used then then a call to IntEnable() must be made in order to allow any +//! USB interrupts to occur. +//! +//! \note WARNING: This API cannot be used on endpoint numbers greater than +//! endpoint 3 so USBIntEnableControl() or USBIntEnableEndpoint() should be +//! used instead. +//! +//! \return None. +// +//***************************************************************************** +#ifndef DEPRECATED +void +USBIntEnable(unsigned long ulBase, unsigned long ulFlags) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + ASSERT((ulFlags & (~USB_INT_ALL)) == 0); + + // + // If any transmit interrupts were enabled then write the transmit + // interrupt settings out to the hardware. + // + if(ulFlags & (USB_INT_HOST_OUT | USB_INT_DEV_IN | USB_INT_EP0)) + { + HWREGH(ulBase + USB_O_TXIE) |= + ulFlags & (USB_INT_HOST_OUT | USB_INT_DEV_IN | USB_INT_EP0); + } + + // + // If any receive interrupts were enabled then write the receive interrupt + // settings out to the hardware. + // + if(ulFlags & (USB_INT_HOST_IN | USB_INT_DEV_OUT)) + { + HWREGH(ulBase + USB_O_RXIE) |= + ((ulFlags & (USB_INT_HOST_IN | USB_INT_DEV_OUT)) >> + USB_INT_RX_SHIFT); + } + + // + // If any general interrupts were enabled then write the general interrupt + // settings out to the hardware. + // + if(ulFlags & USB_INT_STATUS) + { + HWREGB(ulBase + USB_O_IE) |= + (ulFlags & USB_INT_STATUS) >> USB_INT_STATUS_SHIFT; + } + + // + // Enable the power fault interrupt. + // + if(ulFlags & USB_INT_POWER_FAULT) + { + HWREG(ulBase + USB_O_EPCIM) = USB_EPCIM_PF; + } + + // + // Enable the ID pin detect interrupt. + // + if(ulFlags & USB_INT_MODE_DETECT) + { + HWREG(USB0_BASE + USB_O_IDVIM) = USB_IDVIM_ID; + } +} +#endif + +//***************************************************************************** +// +//! Disable control interrupts on a given USB controller. +//! +//! \param ulBase specifies the USB module base address. +//! \param ulFlags specifies which control interrupts to disable. +//! +//! This function will disable the control interrupts for the USB controller +//! specified by the \e ulBase parameter. The \e ulFlags parameter specifies +//! which control interrupts to disable. The flags passed in the \e ulFlags +//! parameters should be the definitions that start with \b USB_INTCTRL_* and +//! not any other \b USB_INT flags. +//! +//! \return None. +// +//***************************************************************************** +void +USBIntDisableControl(unsigned long ulBase, unsigned long ulFlags) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + ASSERT((ulFlags & ~(USB_INTCTRL_ALL)) == 0); + + // + // If any general interrupts were disabled then write the general interrupt + // settings out to the hardware. + // + if(ulFlags & USB_INTCTRL_STATUS) + { + HWREGB(ulBase + USB_O_IE) &= ~(ulFlags & USB_INTCTRL_STATUS); + } + + // + // Disable the power fault interrupt. + // + if(ulFlags & USB_INTCTRL_POWER_FAULT) + { + HWREG(ulBase + USB_O_EPCIM) = 0; + } + + // + // Disable the ID pin detect interrupt. + // + if(ulFlags & USB_INTCTRL_MODE_DETECT) + { + HWREG(USB0_BASE + USB_O_IDVIM) = 0; + } +} + +//***************************************************************************** +// +//! Enable control interrupts on a given USB controller. +//! +//! \param ulBase specifies the USB module base address. +//! \param ulFlags specifies which control interrupts to enable. +//! +//! This function will enable the control interrupts for the USB controller +//! specified by the \e ulBase parameter. The \e ulFlags parameter specifies +//! which control interrupts to enable. The flags passed in the \e ulFlags +//! parameters should be the definitions that start with \b USB_INTCTRL_* and +//! not any other \b USB_INT flags. +//! +//! \return None. +// +//***************************************************************************** +void +USBIntEnableControl(unsigned long ulBase, unsigned long ulFlags) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + ASSERT((ulFlags & (~USB_INTCTRL_ALL)) == 0); + + // + // If any general interrupts were enabled then write the general interrupt + // settings out to the hardware. + // + if(ulFlags & USB_INTCTRL_STATUS) + { + HWREGB(ulBase + USB_O_IE) |= ulFlags; + } + + // + // Enable the power fault interrupt. + // + if(ulFlags & USB_INTCTRL_POWER_FAULT) + { + HWREG(ulBase + USB_O_EPCIM) = USB_EPCIM_PF; + } + + // + // Enable the ID pin detect interrupt. + // + if(ulFlags & USB_INTCTRL_MODE_DETECT) + { + HWREG(USB0_BASE + USB_O_IDVIM) = USB_IDVIM_ID; + } +} + +//***************************************************************************** +// +//! Returns the control interrupt status on a given USB controller. +//! +//! \param ulBase specifies the USB module base address. +//! +//! This function will read control interrupt status for a USB controller. +//! This call will return the current status for control interrupts only, the +//! endpoint interrupt status is retrieved by calling USBIntStatusEndpoint(). +//! The bit values returned should be compared against the \b USB_INTCTRL_* +//! values. +//! +//! The following are the meanings of all \b USB_INCTRL_ flags and the modes +//! for which they are valid. These values apply to any calls to +//! USBIntStatusControl(), USBIntEnableControl(), and USBIntDisableConrol(). +//! Some of these flags are only valid in the following modes as indicated in +//! the parenthesis: Host, Device, and OTG. +//! +//! - \b USB_INTCTRL_ALL - A full mask of all control interrupt sources. +//! - \b USB_INTCTRL_VBUS_ERR - A VBUS error has occurred (Host Only). +//! - \b USB_INTCTRL_SESSION - Session Start Detected on A-side of cable +//! (OTG Only). +//! - \b USB_INTCTRL_SESSION_END - Session End Detected (Device Only) +//! - \b USB_INTCTRL_DISCONNECT - Device Disconnect Detected (Host Only) +//! - \b USB_INTCTRL_CONNECT - Device Connect Detected (Host Only) +//! - \b USB_INTCTRL_SOF - Start of Frame Detected. +//! - \b USB_INTCTRL_BABBLE - USB controller detected a device signaling past +//! the end of a frame. (Host Only) +//! - \b USB_INTCTRL_RESET - Reset signaling detected by device. (Device Only) +//! - \b USB_INTCTRL_RESUME - Resume signaling detected. +//! - \b USB_INTCTRL_SUSPEND - Suspend signaling detected by device (Device +//! Only) +//! - \b USB_INTCTRL_MODE_DETECT - OTG cable mode detection has completed +//! (OTG Only) +//! - \b USB_INTCTRL_POWER_FAULT - Power Fault detected. (Host Only) +//! +//! \note This call will clear the source of all of the control status +//! interrupts. +//! +//! \return Returns the status of the control interrupts for a USB controller. +// +//***************************************************************************** +unsigned long +USBIntStatusControl(unsigned long ulBase) +{ + unsigned long ulStatus; + + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + + // + // Get the general interrupt status, these bits go into the upper 8 bits + // of the returned value. + // + ulStatus = HWREGB(ulBase + USB_O_IS); + + // + // Add the power fault status. + // + if(HWREG(ulBase + USB_O_EPCISC) & USB_EPCISC_PF) + { + // + // Indicate a power fault was detected. + // + ulStatus |= USB_INTCTRL_POWER_FAULT; + + // + // Clear the power fault interrupt. + // + HWREGB(ulBase + USB_O_EPCISC) |= USB_EPCISC_PF; + } + + if(HWREG(USB0_BASE + USB_O_IDVISC) & USB_IDVRIS_ID) + { + // + // Indicate a id detection was detected. + // + ulStatus |= USB_INTCTRL_MODE_DETECT; + + // + // Clear the id detection interrupt. + // + HWREG(USB0_BASE + USB_O_IDVISC) |= USB_IDVRIS_ID; + } + + // + // Return the combined interrupt status. + // + return(ulStatus); +} + +//***************************************************************************** +// +//! Disable endpoint interrupts on a given USB controller. +//! +//! \param ulBase specifies the USB module base address. +//! \param ulFlags specifies which endpoint interrupts to disable. +//! +//! This function will disable endpoint interrupts for the USB controller +//! specified by the \e ulBase parameter. The \e ulFlags parameter specifies +//! which endpoint interrupts to disable. The flags passed in the \e ulFlags +//! parameters should be the definitions that start with \b USB_INTEP_* and not +//! any other \b USB_INT flags. +//! +//! \return None. +// +//***************************************************************************** +void +USBIntDisableEndpoint(unsigned long ulBase, unsigned long ulFlags) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + + // + // If any transmit interrupts were disabled then write the transmit + // interrupt settings out to the hardware. + // + HWREGH(ulBase + USB_O_TXIE) &= + ~(ulFlags & (USB_INTEP_HOST_OUT | USB_INTEP_DEV_IN | USB_INTEP_0)); + + // + // If any receive interrupts were disabled then write the receive interrupt + // settings out to the hardware. + // + HWREGH(ulBase + USB_O_RXIE) &= + ~((ulFlags & (USB_INTEP_HOST_IN | USB_INTEP_DEV_OUT)) >> + USB_INTEP_RX_SHIFT); +} + +//***************************************************************************** +// +//! Enable endpoint interrupts on a given USB controller. +//! +//! \param ulBase specifies the USB module base address. +//! \param ulFlags specifies which endpoint interrupts to enable. +//! +//! This function will enable endpoint interrupts for the USB controller +//! specified by the \e ulBase parameter. The \e ulFlags parameter specifies +//! which endpoint interrupts to enable. The flags passed in the \e ulFlags +//! parameters should be the definitions that start with \b USB_INTEP_* and not +//! any other \b USB_INT flags. +//! +//! \return None. +// +//***************************************************************************** +void +USBIntEnableEndpoint(unsigned long ulBase, unsigned long ulFlags) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + + // + // Enable any transmit endpoint interrupts. + // + HWREGH(ulBase + USB_O_TXIE) |= + ulFlags & (USB_INTEP_HOST_OUT | USB_INTEP_DEV_IN | USB_INTEP_0); + + // + // Enable any receive endpoint interrupts. + // + HWREGH(ulBase + USB_O_RXIE) |= + ((ulFlags & (USB_INTEP_HOST_IN | USB_INTEP_DEV_OUT)) >> + USB_INTEP_RX_SHIFT); +} + +//***************************************************************************** +// +//! Returns the endpoint interrupt status on a given USB controller. +//! +//! \param ulBase specifies the USB module base address. +//! +//! This function will read endpoint interrupt status for a USB controller. +//! This call will return the current status for endpoint interrupts only, the +//! control interrupt status is retrieved by calling USBIntStatusControl(). +//! The bit values returned should be compared against the \b USB_INTEP_* +//! values. These are grouped into classes for \b USB_INTEP_HOST_* and +//! \b USB_INTEP_DEV_* values to handle both host and device modes with all +//! endpoints. +//! +//! \note This call will clear the source of all of the endpoint interrupts. +//! +//! \return Returns the status of the endpoint interrupts for a USB controller. +// +//***************************************************************************** +unsigned long +USBIntStatusEndpoint(unsigned long ulBase) +{ + unsigned long ulStatus; + + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + + // + // Get the transmit interrupt status. + // + ulStatus = HWREGH(ulBase + USB_O_TXIS); + + ulStatus |= (HWREGH(ulBase + USB_O_RXIS) << USB_INTEP_RX_SHIFT); + + // + // Return the combined interrupt status. + // + return(ulStatus); +} + +//***************************************************************************** +// +//! Registers an interrupt handler for the USB controller. +//! +//! \param ulBase specifies the USB module base address. +//! \param pfnHandler is a pointer to the function to be called when a USB +//! interrupt occurs. +//! +//! This sets the handler to be called when a USB interrupt occurs. This will +//! also enable the global USB interrupt in the interrupt controller. The +//! specific desired USB interrupts must be enabled via a separate call to +//! USBIntEnable(). It is the interrupt handler's responsibility to clear the +//! interrupt sources via a calls to USBIntStatusControl() and +//! USBIntStatusEndpoint(). +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +USBIntRegister(unsigned long ulBase, void(*pfnHandler)(void)) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + + // + // Register the interrupt handler. + // + IntRegister(INT_USB0, pfnHandler); + + // + // Enable the USB interrupt. + // + IntEnable(INT_USB0); +} + +//***************************************************************************** +// +//! Unregisters an interrupt handler for the USB controller. +//! +//! \param ulBase specifies the USB module base address. +//! +//! This function unregister the interrupt handler. This function will also +//! disable the USB interrupt in the interrupt controller. +//! +//! \sa IntRegister() for important information about registering or +//! unregistering interrupt handlers. +//! +//! \return None. +// +//***************************************************************************** +void +USBIntUnregister(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + + // + // Unregister the interrupt handler. + // + IntUnregister(INT_USB0); + + // + // Disable the CAN interrupt. + // + IntDisable(INT_USB0); +} + +//***************************************************************************** +// +//! Returns the current status of an endpoint. +//! +//! \param ulBase specifies the USB module base address. +//! \param ulEndpoint is the endpoint to access. +//! +//! This function will return the status of a given endpoint. If any of these +//! status bits need to be cleared, then these these values must be cleared by +//! calling the USBDevEndpointStatusClear() or USBHostEndpointStatusClear() +//! functions. +//! +//! The following are the status flags for host mode: +//! +//! - \b USB_HOST_IN_PID_ERROR - PID error on the given endpoint. +//! - \b USB_HOST_IN_NOT_COMP - The device failed to respond to an IN request. +//! - \b USB_HOST_IN_STALL - A stall was received on an IN endpoint. +//! - \b USB_HOST_IN_DATA_ERROR - There was a CRC or bit-stuff error on an IN +//! endpoint in Isochronous mode. +//! - \b USB_HOST_IN_NAK_TO - NAKs received on this IN endpoint for more than +//! the specified timeout period. +//! - \b USB_HOST_IN_ERROR - Failed to communicate with a device using this IN +//! endpoint. +//! - \b USB_HOST_IN_FIFO_FULL - This IN endpoint's FIFO is full. +//! - \b USB_HOST_IN_PKTRDY - Data packet ready on this IN endpoint. +//! - \b USB_HOST_OUT_NAK_TO - NAKs received on this OUT endpoint for more than +//! the specified timeout period. +//! - \b USB_HOST_OUT_NOT_COMP - The device failed to respond to an OUT +//! request. +//! - \b USB_HOST_OUT_STALL - A stall was received on this OUT endpoint. +//! - \b USB_HOST_OUT_ERROR - Failed to communicate with a device using this +//! OUT endpoint. +//! - \b USB_HOST_OUT_FIFO_NE - This endpoint's OUT FIFO is not empty. +//! - \b USB_HOST_OUT_PKTPEND - The data transfer on this OUT endpoint has not +//! completed. +//! - \b USB_HOST_EP0_NAK_TO - NAKs received on endpoint zero for more than the +//! specified timeout period. +//! - \b USB_HOST_EP0_ERROR - The device failed to respond to a request on +//! endpoint zero. +//! - \b USB_HOST_EP0_IN_STALL - A stall was received on endpoint zero for an +//! IN transaction. +//! - \b USB_HOST_EP0_IN_PKTRDY - Data packet ready on endpoint zero for an IN +//! transaction. +//! +//! The following are the status flags for device mode: +//! +//! - \b USB_DEV_OUT_SENT_STALL - A stall was sent on this OUT endpoint. +//! - \b USB_DEV_OUT_DATA_ERROR - There was a CRC or bit-stuff error on an OUT +//! endpoint. +//! - \b USB_DEV_OUT_OVERRUN - An OUT packet was not loaded due to a full FIFO. +//! - \b USB_DEV_OUT_FIFO_FULL - The OUT endpoint's FIFO is full. +//! - \b USB_DEV_OUT_PKTRDY - There is a data packet ready in the OUT +//! endpoint's FIFO. +//! - \b USB_DEV_IN_NOT_COMP - A larger packet was split up, more data to come. +//! - \b USB_DEV_IN_SENT_STALL - A stall was sent on this IN endpoint. +//! - \b USB_DEV_IN_UNDERRUN - Data was requested on the IN endpoint and no +//! data was ready. +//! - \b USB_DEV_IN_FIFO_NE - The IN endpoint's FIFO is not empty. +//! - \b USB_DEV_IN_PKTPEND - The data transfer on this IN endpoint has not +//! completed. +//! - \b USB_DEV_EP0_SETUP_END - A control transaction ended before Data End +//! condition was sent. +//! - \b USB_DEV_EP0_SENT_STALL - A stall was sent on endpoint zero. +//! - \b USB_DEV_EP0_IN_PKTPEND - The data transfer on endpoint zero has not +//! completed. +//! - \b USB_DEV_EP0_OUT_PKTRDY - There is a data packet ready in endpoint +//! zero's OUT FIFO. +//! +//! \return The current status flags for the endpoint depending on mode. +// +//***************************************************************************** +unsigned long +USBEndpointStatus(unsigned long ulBase, unsigned long ulEndpoint) +{ + unsigned long ulStatus; + + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + ASSERT((ulEndpoint == USB_EP_0) || (ulEndpoint == USB_EP_1) || + (ulEndpoint == USB_EP_2) || (ulEndpoint == USB_EP_3) || + (ulEndpoint == USB_EP_4) || (ulEndpoint == USB_EP_5) || + (ulEndpoint == USB_EP_6) || (ulEndpoint == USB_EP_7) || + (ulEndpoint == USB_EP_8) || (ulEndpoint == USB_EP_9) || + (ulEndpoint == USB_EP_10) || (ulEndpoint == USB_EP_11) || + (ulEndpoint == USB_EP_12) || (ulEndpoint == USB_EP_13) || + (ulEndpoint == USB_EP_14) || (ulEndpoint == USB_EP_15)); + + // + // Get the TX portion of the endpoint status. + // + ulStatus = HWREGH(ulBase + EP_OFFSET(ulEndpoint) + USB_O_TXCSRL1); + + // + // Get the RX portion of the endpoint status. + // + ulStatus |= ((HWREGH(ulBase + EP_OFFSET(ulEndpoint) + USB_O_RXCSRL1)) << + USB_RX_EPSTATUS_SHIFT); + + // + // Return the endpoint status. + // + return(ulStatus); +} + +//***************************************************************************** +// +//! Clears the status bits in this endpoint in host mode. +//! +//! \param ulBase specifies the USB module base address. +//! \param ulEndpoint is the endpoint to access. +//! \param ulFlags are the status bits that will be cleared. +//! +//! This function will clear the status of any bits that are passed in the +//! \e ulFlags parameter. The \e ulFlags parameter can take the value returned +//! from the USBEndpointStatus() call. +//! +//! \note This function should only be called in host mode. +//! +//! \return None. +// +//***************************************************************************** +void +USBHostEndpointStatusClear(unsigned long ulBase, unsigned long ulEndpoint, + unsigned long ulFlags) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + ASSERT((ulEndpoint == USB_EP_0) || (ulEndpoint == USB_EP_1) || + (ulEndpoint == USB_EP_2) || (ulEndpoint == USB_EP_3) || + (ulEndpoint == USB_EP_4) || (ulEndpoint == USB_EP_5) || + (ulEndpoint == USB_EP_6) || (ulEndpoint == USB_EP_7) || + (ulEndpoint == USB_EP_8) || (ulEndpoint == USB_EP_9) || + (ulEndpoint == USB_EP_10) || (ulEndpoint == USB_EP_11) || + (ulEndpoint == USB_EP_12) || (ulEndpoint == USB_EP_13) || + (ulEndpoint == USB_EP_14) || (ulEndpoint == USB_EP_15)); + + // + // Clear the specified flags for the endpoint. + // + if(ulEndpoint == USB_EP_0) + { + HWREGB(ulBase + USB_O_CSRL0) &= ~ulFlags; + } + else + { + HWREGB(ulBase + USB_O_TXCSRL1 + EP_OFFSET(ulEndpoint)) &= ~ulFlags; + HWREGB(ulBase + USB_O_RXCSRL1 + EP_OFFSET(ulEndpoint)) &= + ~(ulFlags >> USB_RX_EPSTATUS_SHIFT); + } +} + +//***************************************************************************** +// +//! Clears the status bits in this endpoint in device mode. +//! +//! \param ulBase specifies the USB module base address. +//! \param ulEndpoint is the endpoint to access. +//! \param ulFlags are the status bits that will be cleared. +//! +//! This function will clear the status of any bits that are passed in the +//! \e ulFlags parameter. The \e ulFlags parameter can take the value returned +//! from the USBEndpointStatus() call. +//! +//! \note This function should only be called in device mode. +//! +//! \return None. +// +//***************************************************************************** +void +USBDevEndpointStatusClear(unsigned long ulBase, unsigned long ulEndpoint, + unsigned long ulFlags) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + ASSERT((ulEndpoint == USB_EP_0) || (ulEndpoint == USB_EP_1) || + (ulEndpoint == USB_EP_2) || (ulEndpoint == USB_EP_3) || + (ulEndpoint == USB_EP_4) || (ulEndpoint == USB_EP_5) || + (ulEndpoint == USB_EP_6) || (ulEndpoint == USB_EP_7) || + (ulEndpoint == USB_EP_8) || (ulEndpoint == USB_EP_9) || + (ulEndpoint == USB_EP_10) || (ulEndpoint == USB_EP_11) || + (ulEndpoint == USB_EP_12) || (ulEndpoint == USB_EP_13) || + (ulEndpoint == USB_EP_14) || (ulEndpoint == USB_EP_15)); + + // + // If this is endpoint 0 then the bits have different meaning and map into + // the TX memory location. + // + if(ulEndpoint == USB_EP_0) + { + // + // Set the Serviced RxPktRdy bit to clear the RxPktRdy. + // + if(ulFlags & USB_DEV_EP0_OUT_PKTRDY) + { + HWREGB(ulBase + USB_O_CSRL0) |= USB_CSRL0_RXRDYC; + } + + // + // Set the serviced Setup End bit to clear the SetupEnd status. + // + if(ulFlags & USB_DEV_EP0_SETUP_END) + { + HWREGB(ulBase + USB_O_CSRL0) |= USB_CSRL0_SETENDC; + } + + // + // Clear the Sent Stall status flag. + // + if(ulFlags & USB_DEV_EP0_SENT_STALL) + { + HWREGB(ulBase + USB_O_CSRL0) &= ~(USB_DEV_EP0_SENT_STALL); + } + } + else + { + // + // Clear out any TX flags that were passed in. Only + // USB_DEV_TX_SENT_STALL and USB_DEV_TX_UNDERRUN should be cleared. + // + HWREGB(ulBase + USB_O_TXCSRL1 + EP_OFFSET(ulEndpoint)) &= + ~(ulFlags & (USB_DEV_TX_SENT_STALL | USB_DEV_TX_UNDERRUN)); + + // + // Clear out valid RX flags that were passed in. Only + // USB_DEV_RX_SENT_STALL, USB_DEV_RX_DATA_ERROR, and USB_DEV_RX_OVERRUN + // should be cleared. + // + HWREGB(ulBase + USB_O_RXCSRL1 + EP_OFFSET(ulEndpoint)) &= + ~((ulFlags & (USB_DEV_RX_SENT_STALL | USB_DEV_RX_DATA_ERROR | + USB_DEV_RX_OVERRUN)) >> USB_RX_EPSTATUS_SHIFT); + } +} + +//***************************************************************************** +// +//! Sets the value data toggle on an endpoint in host mode. +//! +//! \param ulBase specifies the USB module base address. +//! \param ulEndpoint specifies the endpoint to reset the data toggle. +//! \param bDataToggle specifies whether to set the state to DATA0 or DATA1. +//! \param ulFlags specifies whether to set the IN or OUT endpoint. +//! +//! This function is used to force the state of the data toggle in host mode. +//! If the value passed in the \e bDataToggle parameter is \b false, then the +//! data toggle will be set to the DATA0 state, and if it is \b true it will be +//! set to the DATA1 state. The \e ulFlags parameter can be \b USB_EP_HOST_IN +//! or \b USB_EP_HOST_OUT to access the desired portion of this endpoint. The +//! \e ulFlags parameter is ignored for endpoint zero. +//! +//! \note This function should only be called in host mode. +//! +//! \return None. +// +//***************************************************************************** +void +USBHostEndpointDataToggle(unsigned long ulBase, unsigned long ulEndpoint, + tBoolean bDataToggle, unsigned long ulFlags) +{ + unsigned long ulDataToggle; + + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + ASSERT((ulEndpoint == USB_EP_0) || (ulEndpoint == USB_EP_1) || + (ulEndpoint == USB_EP_2) || (ulEndpoint == USB_EP_3) || + (ulEndpoint == USB_EP_4) || (ulEndpoint == USB_EP_5) || + (ulEndpoint == USB_EP_6) || (ulEndpoint == USB_EP_7) || + (ulEndpoint == USB_EP_8) || (ulEndpoint == USB_EP_9) || + (ulEndpoint == USB_EP_10) || (ulEndpoint == USB_EP_11) || + (ulEndpoint == USB_EP_12) || (ulEndpoint == USB_EP_13) || + (ulEndpoint == USB_EP_14) || (ulEndpoint == USB_EP_15)); + + // + // The data toggle defaults to DATA0. + // + ulDataToggle = 0; + + // + // See if the data toggle should be set to DATA1. + // + if(bDataToggle) + { + // + // Select the data toggle bit based on the endpoint. + // + if(ulEndpoint == USB_EP_0) + { + ulDataToggle = USB_CSRH0_DT; + } + else if(ulFlags == USB_EP_HOST_IN) + { + ulDataToggle = USB_RXCSRH1_DT; + } + else + { + ulDataToggle = USB_TXCSRH1_DT; + } + } + + // + // Set the data toggle based on the endpoint. + // + if(ulEndpoint == USB_EP_0) + { + // + // Set the write enable and the bit value for endpoint zero. + // + HWREGB(ulBase + USB_O_CSRH0) = + ((HWREGB(ulBase + USB_O_CSRH0) & + ~(USB_CSRH0_DTWE | USB_CSRH0_DT)) | + (ulDataToggle | USB_CSRH0_DTWE)); + } + else if(ulFlags == USB_EP_HOST_IN) + { + // + // Set the Write enable and the bit value for an IN endpoint. + // + HWREGB(ulBase + USB_O_RXCSRH1 + EP_OFFSET(ulEndpoint)) = + ((HWREGB(ulBase + USB_O_RXCSRH1 + EP_OFFSET(ulEndpoint)) & + ~(USB_RXCSRH1_DTWE | USB_RXCSRH1_DT)) | + (ulDataToggle | USB_RXCSRH1_DTWE)); + } + else + { + // + // Set the Write enable and the bit value for an OUT endpoint. + // + HWREGB(ulBase + USB_O_TXCSRH1 + EP_OFFSET(ulEndpoint)) = + ((HWREGB(ulBase + USB_O_TXCSRH1 + EP_OFFSET(ulEndpoint)) & + ~(USB_TXCSRH1_DTWE | USB_TXCSRH1_DT)) | + (ulDataToggle | USB_TXCSRH1_DTWE)); + } +} + +//***************************************************************************** +// +//! Sets the Data toggle on an endpoint to zero. +//! +//! \param ulBase specifies the USB module base address. +//! \param ulEndpoint specifies the endpoint to reset the data toggle. +//! \param ulFlags specifies whether to access the IN or OUT endpoint. +//! +//! This function will cause the controller to clear the data toggle for an +//! endpoint. This call is not valid for endpoint zero and can be made with +//! host or device controllers. +//! +//! The \e ulFlags parameter should be one of \b USB_EP_HOST_OUT, +//! \b USB_EP_HOST_IN, \b USB_EP_DEV_OUT, or \b USB_EP_DEV_IN. +//! +//! \return None. +// +//***************************************************************************** +void +USBEndpointDataToggleClear(unsigned long ulBase, unsigned long ulEndpoint, + unsigned long ulFlags) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + ASSERT((ulEndpoint == USB_EP_1) || (ulEndpoint == USB_EP_2) || + (ulEndpoint == USB_EP_3) || (ulEndpoint == USB_EP_4) || + (ulEndpoint == USB_EP_5) || (ulEndpoint == USB_EP_6) || + (ulEndpoint == USB_EP_7) || (ulEndpoint == USB_EP_8) || + (ulEndpoint == USB_EP_9) || (ulEndpoint == USB_EP_10) || + (ulEndpoint == USB_EP_11) || (ulEndpoint == USB_EP_12) || + (ulEndpoint == USB_EP_13) || (ulEndpoint == USB_EP_14) || + (ulEndpoint == USB_EP_15)); + + // + // See if the transmit or receive data toggle should be cleared. + // + if(ulFlags & (USB_EP_HOST_OUT | USB_EP_DEV_IN)) + { + HWREGB(ulBase + USB_O_TXCSRL1 + EP_OFFSET(ulEndpoint)) |= + USB_TXCSRL1_CLRDT; + } + else + { + HWREGB(ulBase + USB_O_RXCSRL1 + EP_OFFSET(ulEndpoint)) |= + USB_RXCSRL1_CLRDT; + } +} + +//***************************************************************************** +// +//! Stalls the specified endpoint in device mode. +//! +//! \param ulBase specifies the USB module base address. +//! \param ulEndpoint specifies the endpoint to stall. +//! \param ulFlags specifies whether to stall the IN or OUT endpoint. +//! +//! This function will cause to endpoint number passed in to go into a stall +//! condition. If the \e ulFlags parameter is \b USB_EP_DEV_IN then the stall +//! will be issued on the IN portion of this endpoint. If the \e ulFlags +//! parameter is \b USB_EP_DEV_OUT then the stall will be issued on the OUT +//! portion of this endpoint. +//! +//! \note This function should only be called in device mode. +//! +//! \return None. +// +//***************************************************************************** +void +USBDevEndpointStall(unsigned long ulBase, unsigned long ulEndpoint, + unsigned long ulFlags) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + ASSERT((ulFlags & ~(USB_EP_DEV_IN | USB_EP_DEV_OUT)) == 0) + ASSERT((ulEndpoint == USB_EP_0) || (ulEndpoint == USB_EP_1) || + (ulEndpoint == USB_EP_2) || (ulEndpoint == USB_EP_3) || + (ulEndpoint == USB_EP_4) || (ulEndpoint == USB_EP_5) || + (ulEndpoint == USB_EP_6) || (ulEndpoint == USB_EP_7) || + (ulEndpoint == USB_EP_8) || (ulEndpoint == USB_EP_9) || + (ulEndpoint == USB_EP_10) || (ulEndpoint == USB_EP_11) || + (ulEndpoint == USB_EP_12) || (ulEndpoint == USB_EP_13) || + (ulEndpoint == USB_EP_14) || (ulEndpoint == USB_EP_15)); + + // + // Determine how to stall this endpoint. + // + if(ulEndpoint == USB_EP_0) + { + // + // Perform a stall on endpoint zero. + // + HWREGB(ulBase + USB_O_CSRL0) |= + (USB_CSRL0_STALL | USB_CSRL0_RXRDYC); + } + else if(ulFlags == USB_EP_DEV_IN) + { + // + // Perform a stall on an IN endpoint. + // + HWREGB(ulBase + USB_O_TXCSRL1 + EP_OFFSET(ulEndpoint)) |= + USB_TXCSRL1_STALL; + } + else + { + // + // Perform a stall on an OUT endpoint. + // + HWREGB(ulBase + USB_O_RXCSRL1 + EP_OFFSET(ulEndpoint)) |= + USB_RXCSRL1_STALL; + } +} + +//***************************************************************************** +// +//! Clears the stall condition on the specified endpoint in device mode. +//! +//! \param ulBase specifies the USB module base address. +//! \param ulEndpoint specifies which endpoint to remove the stall condition. +//! \param ulFlags specifies whether to remove the stall condition from the IN +//! or the OUT portion of this endpoint. +//! +//! This function will cause the endpoint number passed in to exit the stall +//! condition. If the \e ulFlags parameter is \b USB_EP_DEV_IN then the stall +//! will be cleared on the IN portion of this endpoint. If the \e ulFlags +//! parameter is \b USB_EP_DEV_OUT then the stall will be cleared on the OUT +//! portion of this endpoint. +//! +//! \note This function should only be called in device mode. +//! +//! \return None. +// +//***************************************************************************** +void +USBDevEndpointStallClear(unsigned long ulBase, unsigned long ulEndpoint, + unsigned long ulFlags) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + ASSERT((ulEndpoint == USB_EP_0) || (ulEndpoint == USB_EP_1) || + (ulEndpoint == USB_EP_2) || (ulEndpoint == USB_EP_3) || + (ulEndpoint == USB_EP_4) || (ulEndpoint == USB_EP_5) || + (ulEndpoint == USB_EP_6) || (ulEndpoint == USB_EP_7) || + (ulEndpoint == USB_EP_8) || (ulEndpoint == USB_EP_9) || + (ulEndpoint == USB_EP_10) || (ulEndpoint == USB_EP_11) || + (ulEndpoint == USB_EP_12) || (ulEndpoint == USB_EP_13) || + (ulEndpoint == USB_EP_14) || (ulEndpoint == USB_EP_15)); + ASSERT((ulFlags & ~(USB_EP_DEV_IN | USB_EP_DEV_OUT)) == 0) + + // + // Determine how to clear the stall on this endpoint. + // + if(ulEndpoint == USB_EP_0) + { + // + // Clear the stall on endpoint zero. + // + HWREGB(ulBase + USB_O_CSRL0) &= ~USB_CSRL0_STALLED; + } + else if(ulFlags == USB_EP_DEV_IN) + { + // + // Clear the stall on an IN endpoint. + // + HWREGB(ulBase + USB_O_TXCSRL1 + EP_OFFSET(ulEndpoint)) &= + ~(USB_TXCSRL1_STALL | USB_TXCSRL1_STALLED); + + // + // Reset the data toggle. + // + HWREGB(ulBase + USB_O_TXCSRL1 + EP_OFFSET(ulEndpoint)) |= + USB_TXCSRL1_CLRDT; + } + else + { + // + // Clear the stall on an OUT endpoint. + // + HWREGB(ulBase + USB_O_RXCSRL1 + EP_OFFSET(ulEndpoint)) &= + ~(USB_RXCSRL1_STALL | USB_RXCSRL1_STALLED); + + // + // Reset the data toggle. + // + HWREGB(ulBase + USB_O_RXCSRL1 + EP_OFFSET(ulEndpoint)) |= + USB_RXCSRL1_CLRDT; + } +} + +//***************************************************************************** +// +//! Connects the USB controller to the bus in device mode. +//! +//! \param ulBase specifies the USB module base address. +//! +//! This function will cause the soft connect feature of the USB controller to +//! be enabled. Call USBDisconnect() to remove the USB device from the bus. +//! +//! \note This function should only be called in device mode. +//! +//! \return None. +// +//***************************************************************************** +void +USBDevConnect(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + + // + // Enable connection to the USB bus. + // + HWREGB(ulBase + USB_O_POWER) |= USB_POWER_SOFTCONN; +} + +//***************************************************************************** +// +//! Removes the USB controller from the bus in device mode. +//! +//! \param ulBase specifies the USB module base address. +//! +//! This function will cause the soft connect feature of the USB controller to +//! remove the device from the USB bus. A call to USBDevConnect() is needed to +//! reconnect to the bus. +//! +//! \note This function should only be called in device mode. +//! +//! \return None. +// +//***************************************************************************** +void +USBDevDisconnect(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + + // + // Disable connection to the USB bus. + // + HWREGB(ulBase + USB_O_POWER) &= (~USB_POWER_SOFTCONN); +} + +//***************************************************************************** +// +//! Sets the address in device mode. +//! +//! \param ulBase specifies the USB module base address. +//! \param ulAddress is the address to use for a device. +//! +//! This function will set the device address on the USB bus. This address was +//! likely received via a SET ADDRESS command from the host controller. +//! +//! \note This function should only be called in device mode. +//! +//! \return None. +// +//***************************************************************************** +void +USBDevAddrSet(unsigned long ulBase, unsigned long ulAddress) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + + // + // Set the function address in the correct location. + // + HWREGB(ulBase + USB_O_FADDR) = (unsigned char)ulAddress; +} + +//***************************************************************************** +// +//! Returns the current device address in device mode. +//! +//! \param ulBase specifies the USB module base address. +//! +//! This function will return the current device address. This address was set +//! by a call to USBDevAddrSet(). +//! +//! \note This function should only be called in device mode. +//! +//! \return The current device address. +// +//***************************************************************************** +unsigned long +USBDevAddrGet(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + + // + // Return the function address. + // + return(HWREGB(ulBase + USB_O_FADDR)); +} + +//***************************************************************************** +// +//! Sets the base configuration for a host endpoint. +//! +//! \param ulBase specifies the USB module base address. +//! \param ulEndpoint is the endpoint to access. +//! \param ulMaxPayload is the maximum payload for this endpoint. +//! \param ulNAKPollInterval is the either the NAK timeout limit or the polling +//! interval depending on the type of endpoint. +//! \param ulTargetEndpoint is the endpoint that the host endpoint is +//! targeting. +//! \param ulFlags are used to configure other endpoint settings. +//! +//! This function will set the basic configuration for the transmit or receive +//! portion of an endpoint in host mode. The \e ulFlags parameter determines +//! some of the configuration while the other parameters provide the rest. The +//! \e ulFlags parameter determines whether this is an IN endpoint +//! (USB_EP_HOST_IN or USB_EP_DEV_IN) or an OUT endpoint (USB_EP_HOST_OUT or +//! USB_EP_DEV_OUT), whether this is a Full speed endpoint (USB_EP_SPEED_FULL) +//! or a Low speed endpoint (USB_EP_SPEED_LOW). +//! +//! The \b USB_EP_MODE_ flags control the type of the endpoint. +//! - \b USB_EP_MODE_CTRL is a control endpoint. +//! - \b USB_EP_MODE_ISOC is an isochronous endpoint. +//! - \b USB_EP_MODE_BULK is a bulk endpoint. +//! - \b USB_EP_MODE_INT is an interrupt endpoint. +//! +//! The \e ulNAKPollInterval parameter has different meanings based on the +//! \b USB_EP_MODE value and whether or not this call is being made for +//! endpoint zero or another endpoint. For endpoint zero or any Bulk +//! endpoints, this value always indicates the number of frames to allow a +//! device to NAK before considering it a timeout. If this endpoint is an +//! isochronous or interrupt endpoint, this value is the polling interval for +//! this endpoint. +//! +//! For interrupt endpoints the polling interval is simply the number of +//! frames between polling an interrupt endpoint. For isochronous endpoints +//! this value represents a polling interval of 2 ^ (\e ulNAKPollInterval - 1) +//! frames. When used as a NAK timeout, the \e ulNAKPollInterval value +//! specifies 2 ^ (\e ulNAKPollInterval - 1) frames before issuing a time out. +//! There are two special time out values that can be specified when setting +//! the \e ulNAKPollInterval value. The first is \b MAX_NAK_LIMIT which is the +//! maximum value that can be passed in this variable. The other is +//! \b DISABLE_NAK_LIMIT which indicates that there should be no limit on the +//! number of NAKs. +//! +//! The \b USB_EP_DMA_MODE_ flags enables the type of DMA used to access the +//! endpoint's data FIFOs. The choice of the DMA mode depends on how the DMA +//! controller is configured and how it is being used. See the ``Using USB +//! with the uDMA Controller'' section for more information on DMA +//! configuration. +//! +//! When configuring the OUT portion of an endpoint, the \b USB_EP_AUTO_SET bit +//! is specified to cause the transmission of data on the USB bus to start +//! as soon as the number of bytes specified by \e ulMaxPayload have been +//! written into the OUT FIFO for this endpoint. +//! +//! When configuring the IN portion of an endpoint, the \b USB_EP_AUTO_REQUEST +//! bit can be specified to trigger the request for more data once the FIFO has +//! been drained enough to fit \e ulMaxPayload bytes. The \b USB_EP_AUTO_CLEAR +//! bit can be used to clear the data packet ready flag automatically once the +//! data has been read from the FIFO. If this is not used, this flag must be +//! manually cleared via a call to USBDevEndpointStatusClear() or +//! USBHostEndpointStatusClear(). +//! +//! \note This function should only be called in host mode. +//! +//! \return None. +// +//***************************************************************************** +void +USBHostEndpointConfig(unsigned long ulBase, unsigned long ulEndpoint, + unsigned long ulMaxPayload, + unsigned long ulNAKPollInterval, + unsigned long ulTargetEndpoint, unsigned long ulFlags) +{ + unsigned long ulRegister; + + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + ASSERT((ulEndpoint == USB_EP_0) || (ulEndpoint == USB_EP_1) || + (ulEndpoint == USB_EP_2) || (ulEndpoint == USB_EP_3) || + (ulEndpoint == USB_EP_4) || (ulEndpoint == USB_EP_5) || + (ulEndpoint == USB_EP_6) || (ulEndpoint == USB_EP_7) || + (ulEndpoint == USB_EP_8) || (ulEndpoint == USB_EP_9) || + (ulEndpoint == USB_EP_10) || (ulEndpoint == USB_EP_11) || + (ulEndpoint == USB_EP_12) || (ulEndpoint == USB_EP_13) || + (ulEndpoint == USB_EP_14) || (ulEndpoint == USB_EP_15)); + ASSERT(ulNAKPollInterval <= MAX_NAK_LIMIT); + + // + // Endpoint zero is configured differently than the other endpoints, so see + // if this is endpoint zero. + // + if(ulEndpoint == USB_EP_0) + { + // + // Set the NAK timeout. + // + HWREGB(ulBase + USB_O_NAKLMT) = ulNAKPollInterval; + + // + // Set the transfer type information. + // + HWREGB(ulBase + EP_OFFSET(ulEndpoint) + USB_O_TYPE0) = + ((ulFlags & USB_EP_SPEED_FULL) ? USB_TYPE0_SPEED_FULL : + USB_TYPE0_SPEED_LOW); + } + else + { + // + // Start with the target endpoint. + // + ulRegister = ulTargetEndpoint; + + // + // Set the speed for the device using this endpoint. + // + if(ulFlags & USB_EP_SPEED_FULL) + { + ulRegister |= USB_TXTYPE1_SPEED_FULL; + } + else + { + ulRegister |= USB_TXTYPE1_SPEED_LOW; + } + + // + // Set the protocol for the device using this endpoint. + // + switch(ulFlags & USB_EP_MODE_MASK) + { + // + // The bulk protocol is being used. + // + case USB_EP_MODE_BULK: + { + ulRegister |= USB_TXTYPE1_PROTO_BULK; + break; + } + + // + // The isochronous protocol is being used. + // + case USB_EP_MODE_ISOC: + { + ulRegister |= USB_TXTYPE1_PROTO_ISOC; + break; + } + + // + // The interrupt protocol is being used. + // + case USB_EP_MODE_INT: + { + ulRegister |= USB_TXTYPE1_PROTO_INT; + break; + } + + // + // The control protocol is being used. + // + case USB_EP_MODE_CTRL: + { + ulRegister |= USB_TXTYPE1_PROTO_CTRL; + break; + } + } + + // + // See if the transmit or receive endpoint is being configured. + // + if(ulFlags & USB_EP_HOST_OUT) + { + // + // Set the transfer type information. + // + HWREGB(ulBase + EP_OFFSET(ulEndpoint) + USB_O_TXTYPE1) = + ulRegister; + + // + // Set the NAK timeout or polling interval. + // + HWREGB(ulBase + EP_OFFSET(ulEndpoint) + USB_O_TXINTERVAL1) = + ulNAKPollInterval; + + // + // Set the Maximum Payload per transaction. + // + HWREGB(ulBase + EP_OFFSET(ulEndpoint) + USB_O_TXMAXP1) = + ulMaxPayload; + + // + // Set the transmit control value to zero. + // + ulRegister = 0; + + // + // Allow auto setting of TxPktRdy when max packet size has been + // loaded into the FIFO. + // + if(ulFlags & USB_EP_AUTO_SET) + { + ulRegister |= USB_TXCSRH1_AUTOSET; + } + + // + // Configure the DMA Mode. + // + if(ulFlags & USB_EP_DMA_MODE_1) + { + ulRegister |= USB_TXCSRH1_DMAEN | USB_TXCSRH1_DMAMOD; + } + else if(ulFlags & USB_EP_DMA_MODE_0) + { + ulRegister |= USB_TXCSRH1_DMAEN; + } + + // + // Write out the transmit control value. + // + HWREGB(ulBase + EP_OFFSET(ulEndpoint) + USB_O_TXCSRH1) = + (unsigned char)ulRegister; + } + else + { + // + // Set the transfer type information. + // + HWREGB(ulBase + EP_OFFSET(ulEndpoint) + USB_O_RXTYPE1) = + ulRegister; + + // + // Set the NAK timeout or polling interval. + // + HWREGB(ulBase + EP_OFFSET(ulEndpoint) + USB_O_RXINTERVAL1) = + ulNAKPollInterval; + + // + // Set the receive control value to zero. + // + ulRegister = 0; + + // + // Allow auto clearing of RxPktRdy when packet of size max packet + // has been unloaded from the FIFO. + // + if(ulFlags & USB_EP_AUTO_CLEAR) + { + ulRegister |= USB_RXCSRH1_AUTOCL; + } + + // + // Configure the DMA Mode. + // + if(ulFlags & USB_EP_DMA_MODE_1) + { + ulRegister |= USB_RXCSRH1_DMAEN | USB_RXCSRH1_DMAMOD; + } + else if(ulFlags & USB_EP_DMA_MODE_0) + { + ulRegister |= USB_RXCSRH1_DMAEN; + } + + // + // Write out the receive control value. + // + HWREGB(ulBase + EP_OFFSET(ulEndpoint) + USB_O_RXCSRH1) = + (unsigned char)ulRegister; + } + } +} + +//***************************************************************************** +// +//! Sets the configuration for an endpoint. +//! +//! \param ulBase specifies the USB module base address. +//! \param ulEndpoint is the endpoint to access. +//! \param ulMaxPacketSize is the maximum packet size for this endpoint. +//! \param ulFlags are used to configure other endpoint settings. +//! +//! This function will set the basic configuration for an endpoint in device +//! mode. Endpoint zero does not have a dynamic configuration, so this +//! function should not be called for endpoint zero. The \e ulFlags parameter +//! determines some of the configuration while the other parameters provide the +//! rest. +//! +//! The \b USB_EP_MODE_ flags define what the type is for the given endpoint. +//! +//! - \b USB_EP_MODE_CTRL is a control endpoint. +//! - \b USB_EP_MODE_ISOC is an isochronous endpoint. +//! - \b USB_EP_MODE_BULK is a bulk endpoint. +//! - \b USB_EP_MODE_INT is an interrupt endpoint. +//! +//! The \b USB_EP_DMA_MODE_ flags determines the type of DMA access to the +//! endpoint data FIFOs. The choice of the DMA mode depends on how the DMA +//! controller is configured and how it is being used. See the ``Using USB +//! with the uDMA Controller'' section for more information on DMA +//! configuration. +//! +//! When configuring an IN endpoint, the \b USB_EP_AUTO_SET bit can be +//! specified to cause the automatic transmission of data on the USB bus as +//! soon as \e ulMaxPacketSize bytes of data are written into the FIFO for +//! this endpoint. This is commonly used with DMA as no interaction is +//! required to start the transmission of data. +//! +//! When configuring an OUT endpoint, the \b USB_EP_AUTO_REQUEST bit is +//! specified to trigger the request for more data once the FIFO has been +//! drained enough to receive \e ulMaxPacketSize more bytes of data. Also for +//! OUT endpoints, the \b USB_EP_AUTO_CLEAR bit can be used to clear the data +//! packet ready flag automatically once the data has been read from the FIFO. +//! If this is not used, this flag must be manually cleared via a call to +//! USBDevEndpointStatusClear(). Both of these settings can be used to remove +//! the need for extra calls when using the controller in DMA mode. +//! +//! \note This function should only be called in device mode. +//! +//! \return None. +// +//***************************************************************************** +void +USBDevEndpointConfigSet(unsigned long ulBase, unsigned long ulEndpoint, + unsigned long ulMaxPacketSize, unsigned long ulFlags) +{ + unsigned long ulRegister; + + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + ASSERT((ulEndpoint == USB_EP_1) || (ulEndpoint == USB_EP_2) || + (ulEndpoint == USB_EP_3) || (ulEndpoint == USB_EP_4) || + (ulEndpoint == USB_EP_5) || (ulEndpoint == USB_EP_6) || + (ulEndpoint == USB_EP_7) || (ulEndpoint == USB_EP_8) || + (ulEndpoint == USB_EP_9) || (ulEndpoint == USB_EP_10) || + (ulEndpoint == USB_EP_11) || (ulEndpoint == USB_EP_12) || + (ulEndpoint == USB_EP_13) || (ulEndpoint == USB_EP_14) || + (ulEndpoint == USB_EP_15)); + + // + // Determine if a transmit or receive endpoint is being configured. + // + if(ulFlags & USB_EP_DEV_IN) + { + // + // Set the maximum packet size. + // + HWREGB(ulBase + EP_OFFSET(ulEndpoint) + USB_O_TXMAXP1) = + ulMaxPacketSize; + + // + // The transmit control value is zero unless options are enabled. + // + ulRegister = 0; + + // + // Allow auto setting of TxPktRdy when max packet size has been loaded + // into the FIFO. + // + if(ulFlags & USB_EP_AUTO_SET) + { + ulRegister |= USB_TXCSRH1_AUTOSET; + } + + // + // Configure the DMA mode. + // + if(ulFlags & USB_EP_DMA_MODE_1) + { + ulRegister |= USB_TXCSRH1_DMAEN | USB_TXCSRH1_DMAMOD; + } + else if(ulFlags & USB_EP_DMA_MODE_0) + { + ulRegister |= USB_TXCSRH1_DMAEN; + } + + // + // Enable isochronous mode if requested. + // + if((ulFlags & USB_EP_MODE_MASK) == USB_EP_MODE_ISOC) + { + ulRegister |= USB_TXCSRH1_ISO; + } + + // + // Write the transmit control value. + // + HWREGB(ulBase + EP_OFFSET(ulEndpoint) + USB_O_TXCSRH1) = + (unsigned char)ulRegister; + + // + // Reset the Data toggle to zero. + // + HWREGB(ulBase + EP_OFFSET(ulEndpoint) + USB_O_TXCSRL1) = + USB_TXCSRL1_CLRDT; + } + else + { + // + // Set the MaxPacketSize. + // + HWREGB(ulBase + EP_OFFSET(ulEndpoint) + USB_O_RXMAXP1) = + ulMaxPacketSize; + + // + // The receive control value is zero unless options are enabled. + // + ulRegister = 0; + + // + // Allow auto clearing of RxPktRdy when packet of size max packet + // has been unloaded from the FIFO. + // + if(ulFlags & USB_EP_AUTO_CLEAR) + { + ulRegister = USB_RXCSRH1_AUTOCL; + } + + // + // Configure the DMA mode. + // + if(ulFlags & USB_EP_DMA_MODE_1) + { + ulRegister |= USB_RXCSRH1_DMAEN | USB_RXCSRH1_DMAMOD; + } + else if(ulFlags & USB_EP_DMA_MODE_0) + { + ulRegister |= USB_RXCSRH1_DMAEN; + } + + // + // Enable isochronous mode if requested. + // + if((ulFlags & USB_EP_MODE_MASK) == USB_EP_MODE_ISOC) + { + ulRegister |= USB_RXCSRH1_ISO; + } + + // + // Write the receive control value. + // + HWREGB(ulBase + EP_OFFSET(ulEndpoint) + USB_O_RXCSRH1) = + (unsigned char)ulRegister; + + // + // Reset the Data toggle to zero. + // + HWREGB(ulBase + EP_OFFSET(ulEndpoint) + USB_O_RXCSRL1) = + USB_RXCSRL1_CLRDT; + } +} + +//***************************************************************************** +// +//! Gets the current configuration for an endpoint. +//! +//! \param ulBase specifies the USB module base address. +//! \param ulEndpoint is the endpoint to access. +//! \param pulMaxPacketSize is a pointer which will be written with the +//! maximum packet size for this endpoint. +//! \param pulFlags is a pointer which will be written with the current +//! endpoint settings. On entry to the function, this pointer must contain +//! either \b USB_EP_DEV_IN or \b USB_EP_DEV_OUT to indicate whether the IN or +//! OUT endpoint is to be queried. +//! +//! This function will return the basic configuration for an endpoint in device +//! mode. The values returned in \e *pulMaxPacketSize and \e *pulFlags are +//! equivalent to the \e ulMaxPacketSize and \e ulFlags previously passed to +//! USBDevEndpointConfigSet() for this endpoint. +//! +//! \note This function should only be called in device mode. +//! +//! \return None. +// +//***************************************************************************** +void +USBDevEndpointConfigGet(unsigned long ulBase, unsigned long ulEndpoint, + unsigned long *pulMaxPacketSize, + unsigned long *pulFlags) +{ + unsigned long ulRegister; + + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + ASSERT(pulMaxPacketSize && pulFlags); + ASSERT((ulEndpoint == USB_EP_1) || (ulEndpoint == USB_EP_2) || + (ulEndpoint == USB_EP_3) || (ulEndpoint == USB_EP_4) || + (ulEndpoint == USB_EP_5) || (ulEndpoint == USB_EP_6) || + (ulEndpoint == USB_EP_7) || (ulEndpoint == USB_EP_8) || + (ulEndpoint == USB_EP_9) || (ulEndpoint == USB_EP_10) || + (ulEndpoint == USB_EP_11) || (ulEndpoint == USB_EP_12) || + (ulEndpoint == USB_EP_13) || (ulEndpoint == USB_EP_14) || + (ulEndpoint == USB_EP_15)); + + // + // Determine if a transmit or receive endpoint is being queried. + // + if(*pulFlags & USB_EP_DEV_IN) + { + // + // Clear the flags other than the direction bit. + // + *pulFlags = USB_EP_DEV_IN; + + // + // Get the maximum packet size. + // + *pulMaxPacketSize = (unsigned long)HWREGB(ulBase + + EP_OFFSET(ulEndpoint) + + USB_O_TXMAXP1); + + // + // Get the current transmit control register value. + // + ulRegister = (unsigned long)HWREGB(ulBase + EP_OFFSET(ulEndpoint) + + USB_O_TXCSRH1); + + // + // Are we allowing auto setting of TxPktRdy when max packet size has + // been loaded into the FIFO? + // + if(ulRegister & USB_TXCSRH1_AUTOSET) + { + *pulFlags |= USB_EP_AUTO_SET; + } + + // + // Get the DMA mode. + // + if(ulRegister & USB_TXCSRH1_DMAEN) + { + if(ulRegister & USB_TXCSRH1_DMAMOD) + { + *pulFlags |= USB_EP_DMA_MODE_1; + } + else + { + *pulFlags |= USB_EP_DMA_MODE_0; + } + } + + // + // Are we in isochronous mode? + // + if(ulRegister & USB_TXCSRH1_ISO) + { + *pulFlags |= USB_EP_MODE_ISOC; + } + else + { + // + // The hardware doesn't differentiate between bulk, interrupt + // and control mode for the endpoint so we just set something + // that isn't isochronous. This ensures that anyone modifying + // the returned flags in preparation for a call to + // USBDevEndpointConfigSet will not see an unexpected mode change. + // If they decode the returned mode, however, they may be in for + // a surprise. + // + *pulFlags |= USB_EP_MODE_BULK; + } + } + else + { + // + // Clear the flags other than the direction bit. + // + *pulFlags = USB_EP_DEV_OUT; + + // + // Get the MaxPacketSize. + // + *pulMaxPacketSize = (unsigned long)HWREGB(ulBase + + EP_OFFSET(ulEndpoint) + + USB_O_RXMAXP1); + + // + // Get the current receive control register value. + // + ulRegister = (unsigned long)HWREGB(ulBase + EP_OFFSET(ulEndpoint) + + USB_O_RXCSRH1); + + // + // Are we allowing auto clearing of RxPktRdy when packet of size max + // packet has been unloaded from the FIFO? + // + if(ulRegister & USB_RXCSRH1_AUTOCL) + { + *pulFlags |= USB_EP_AUTO_CLEAR; + } + + // + // Get the DMA mode. + // + if(ulRegister & USB_RXCSRH1_DMAEN) + { + if(ulRegister & USB_RXCSRH1_DMAMOD) + { + *pulFlags |= USB_EP_DMA_MODE_1; + } + else + { + *pulFlags |= USB_EP_DMA_MODE_0; + } + } + + // + // Are we in isochronous mode? + // + if(ulRegister & USB_RXCSRH1_ISO) + { + *pulFlags |= USB_EP_MODE_ISOC; + } + else + { + // + // The hardware doesn't differentiate between bulk, interrupt + // and control mode for the endpoint so we just set something + // that isn't isochronous. This ensures that anyone modifying + // the returned flags in preparation for a call to + // USBDevEndpointConfigSet will not see an unexpected mode change. + // If they decode the returned mode, however, they may be in for + // a surprise. + // + *pulFlags |= USB_EP_MODE_BULK; + } + } +} + +//***************************************************************************** +// +//! Sets the FIFO configuration for an endpoint. +//! +//! \param ulBase specifies the USB module base address. +//! \param ulEndpoint is the endpoint to access. +//! \param ulFIFOAddress is the starting address for the FIFO. +//! \param ulFIFOSize is the size of the FIFO in bytes. +//! \param ulFlags specifies what information to set in the FIFO configuration. +//! +//! This function will set the starting FIFO RAM address and size of the FIFO +//! for a given endpoint. Endpoint zero does not have a dynamically +//! configurable FIFO so this function should not be called for endpoint zero. +//! The \e ulFIFOSize parameter should be one of the values in the +//! \b USB_FIFO_SZ_ values. If the endpoint is going to use double buffering +//! it should use the values with the \b _DB at the end of the value. For +//! example, use \b USB_FIFO_SZ_16_DB to configure an endpoint to have a 16 +//! byte double buffered FIFO. If a double buffered FIFO is used, then the +//! actual size of the FIFO will be twice the size indicated by the +//! \e ulFIFOSize parameter. This means that the \b USB_FIFO_SZ_16_DB value +//! will use 32 bytes of the USB controller's FIFO memory. +//! +//! The \e ulFIFOAddress value should be a multiple of 8 bytes and directly +//! indicates the starting address in the USB controller's FIFO RAM. For +//! example, a value of 64 indicates that the FIFO should start 64 bytes into +//! the USB controller's FIFO memory. The \e ulFlags value specifies whether +//! the endpoint's OUT or IN FIFO should be configured. If in host mode, use +//! \b USB_EP_HOST_OUT or \b USB_EP_HOST_IN, and if in device mode use +//! \b USB_EP_DEV_OUT or \b USB_EP_DEV_IN. +//! +//! \return None. +// +//***************************************************************************** +void +USBFIFOConfigSet(unsigned long ulBase, unsigned long ulEndpoint, + unsigned long ulFIFOAddress, unsigned long ulFIFOSize, + unsigned long ulFlags) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + ASSERT((ulEndpoint == USB_EP_1) || (ulEndpoint == USB_EP_2) || + (ulEndpoint == USB_EP_3) || (ulEndpoint == USB_EP_4) || + (ulEndpoint == USB_EP_5) || (ulEndpoint == USB_EP_6) || + (ulEndpoint == USB_EP_7) || (ulEndpoint == USB_EP_8) || + (ulEndpoint == USB_EP_9) || (ulEndpoint == USB_EP_10) || + (ulEndpoint == USB_EP_11) || (ulEndpoint == USB_EP_12) || + (ulEndpoint == USB_EP_13) || (ulEndpoint == USB_EP_14) || + (ulEndpoint == USB_EP_15)); + + // + // See if the transmit or receive FIFO is being configured. + // + if(ulFlags & (USB_EP_HOST_OUT | USB_EP_DEV_IN)) + { + // + // Set the transmit FIFO location and size for this endpoint. + // + USBIndexWrite(ulBase, ulEndpoint >> 4, USB_O_TXFIFOSZ, ulFIFOSize, 1); + USBIndexWrite(ulBase, ulEndpoint >> 4, USB_O_TXFIFOADD, + ulFIFOAddress >> 3, 2); + } + else + { + // + // Set the receive FIFO location and size for this endpoint. + // + USBIndexWrite(ulBase, ulEndpoint >> 4, USB_O_RXFIFOSZ, ulFIFOSize, 1); + USBIndexWrite(ulBase, ulEndpoint >> 4, USB_O_RXFIFOADD, + ulFIFOAddress >> 3, 2); + } +} + +//***************************************************************************** +// +//! Returns the FIFO configuration for an endpoint. +//! +//! \param ulBase specifies the USB module base address. +//! \param ulEndpoint is the endpoint to access. +//! \param pulFIFOAddress is the starting address for the FIFO. +//! \param pulFIFOSize is the size of the FIFO in bytes. +//! \param ulFlags specifies what information to retrieve from the FIFO +//! configuration. +//! +//! This function will return the starting address and size of the FIFO for a +//! given endpoint. Endpoint zero does not have a dynamically configurable +//! FIFO so this function should not be called for endpoint zero. The +//! \e ulFlags parameter specifies whether the endpoint's OUT or IN FIFO should +//! be read. If in host mode, the \e ulFlags parameter should be +//! \b USB_EP_HOST_OUT or \b USB_EP_HOST_IN, and if in device mode the +//! \e ulFlags parameter should be either \b USB_EP_DEV_OUT or +//! \b USB_EP_DEV_IN. +//! +//! \return None. +// +//***************************************************************************** +void +USBFIFOConfigGet(unsigned long ulBase, unsigned long ulEndpoint, + unsigned long *pulFIFOAddress, unsigned long *pulFIFOSize, + unsigned long ulFlags) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + ASSERT((ulEndpoint == USB_EP_1) || (ulEndpoint == USB_EP_2) || + (ulEndpoint == USB_EP_3) || (ulEndpoint == USB_EP_4) || + (ulEndpoint == USB_EP_5) || (ulEndpoint == USB_EP_6) || + (ulEndpoint == USB_EP_7) || (ulEndpoint == USB_EP_8) || + (ulEndpoint == USB_EP_9) || (ulEndpoint == USB_EP_10) || + (ulEndpoint == USB_EP_11) || (ulEndpoint == USB_EP_12) || + (ulEndpoint == USB_EP_13) || (ulEndpoint == USB_EP_14) || + (ulEndpoint == USB_EP_15)); + + // + // See if the transmit or receive FIFO is being configured. + // + if(ulFlags & (USB_EP_HOST_OUT | USB_EP_DEV_IN)) + { + // + // Get the transmit FIFO location and size for this endpoint. + // + *pulFIFOAddress = (USBIndexRead(ulBase, ulEndpoint >> 4, + (unsigned long)USB_O_TXFIFOADD, + 2)) << 3; + *pulFIFOSize = USBIndexRead(ulBase, ulEndpoint >> 4, + (unsigned long)USB_O_TXFIFOSZ, 1); + + } + else + { + // + // Get the receive FIFO location and size for this endpoint. + // + *pulFIFOAddress = (USBIndexRead(ulBase, ulEndpoint >> 4, + (unsigned long)USB_O_RXFIFOADD, + 2)) << 3; + *pulFIFOSize = USBIndexRead(ulBase, ulEndpoint >> 4, + (unsigned long)USB_O_RXFIFOSZ, 1); + } +} + +//***************************************************************************** +// +//! Enable DMA on a given endpoint. +//! +//! \param ulBase specifies the USB module base address. +//! \param ulEndpoint is the endpoint to access. +//! \param ulFlags specifies which direction and what mode to use when enabling +//! DMA. +//! +//! This function will enable DMA on a given endpoint and set the mode according +//! to the values in the \e ulFlags parameter. The \e ulFlags parameter should +//! have \b USB_EP_DEV_IN or \b USB_EP_DEV_OUT set. +//! +//! \return None. +// +//***************************************************************************** +void +USBEndpointDMAEnable(unsigned long ulBase, unsigned long ulEndpoint, + unsigned long ulFlags) +{ + // + // See if the transmit DMA is being enabled. + // + if(ulFlags & USB_EP_DEV_IN) + { + // + // Enable DMA on the transmit end point. + // + HWREGB(ulBase + EP_OFFSET(ulEndpoint) + USB_O_TXCSRH1) |= + USB_TXCSRH1_DMAEN; + } + else + { + // + // Enable DMA on the receive end point. + // + HWREGB(ulBase + EP_OFFSET(ulEndpoint) + USB_O_RXCSRH1) |= + USB_RXCSRH1_DMAEN; + } +} + +//***************************************************************************** +// +//! Disable DMA on a given endpoint. +//! +//! \param ulBase specifies the USB module base address. +//! \param ulEndpoint is the endpoint to access. +//! \param ulFlags specifies which direction to disable. +//! +//! This function will disable DMA on a given end point to allow non-DMA +//! USB transactions to generate interrupts normally. The ulFlags should be +//! \b USB_EP_DEV_IN or \b USB_EP_DEV_OUT all other bits are ignored. +//! +//! \return None. +// +//***************************************************************************** +void +USBEndpointDMADisable(unsigned long ulBase, unsigned long ulEndpoint, + unsigned long ulFlags) +{ + // + // If this was a request to disable DMA on the IN portion of the end point + // then handle it. + // + if(ulFlags & USB_EP_DEV_IN) + { + // + // Just disable DMA leave the mode setting. + // + HWREGB(ulBase + EP_OFFSET(ulEndpoint) + USB_O_TXCSRH1) &= + ~USB_TXCSRH1_DMAEN; + } + else + { + // + // Just disable DMA leave the mode setting. + // + HWREGB(ulBase + EP_OFFSET(ulEndpoint) + USB_O_RXCSRH1) &= + ~USB_RXCSRH1_DMAEN; + } +} + +//***************************************************************************** +// +//! Determine the number of bytes of data available in a given endpoint's FIFO. +//! +//! \param ulBase specifies the USB module base address. +//! \param ulEndpoint is the endpoint to access. +//! +//! This function will return the number of bytes of data currently available +//! in the FIFO for the given receive (OUT) endpoint. It may be used prior to +//! calling USBEndpointDataGet() to determine the size of buffer required to +//! hold the newly-received packet. +//! +//! \return This call will return the number of bytes available in a given +//! endpoint FIFO. +// +//***************************************************************************** +unsigned long +USBEndpointDataAvail(unsigned long ulBase, unsigned long ulEndpoint) +{ + unsigned long ulRegister; + + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + ASSERT((ulEndpoint == USB_EP_0) || (ulEndpoint == USB_EP_1) || + (ulEndpoint == USB_EP_2) || (ulEndpoint == USB_EP_3) || + (ulEndpoint == USB_EP_4) || (ulEndpoint == USB_EP_5) || + (ulEndpoint == USB_EP_6) || (ulEndpoint == USB_EP_7) || + (ulEndpoint == USB_EP_8) || (ulEndpoint == USB_EP_9) || + (ulEndpoint == USB_EP_10) || (ulEndpoint == USB_EP_11) || + (ulEndpoint == USB_EP_12) || (ulEndpoint == USB_EP_13) || + (ulEndpoint == USB_EP_14) || (ulEndpoint == USB_EP_15)); + + // + // Get the address of the receive status register to use, based on the + // endpoint. + // + if(ulEndpoint == USB_EP_0) + { + ulRegister = USB_O_CSRL0; + } + else + { + ulRegister = USB_O_RXCSRL1 + EP_OFFSET(ulEndpoint); + } + + // + // Is there a packet ready in the FIFO? + // + if((HWREGH(ulBase + ulRegister) & USB_CSRL0_RXRDY) == 0) + { + return(0); + } + + // + // Return the byte count in the FIFO. + // + return(HWREGH(ulBase + USB_O_COUNT0 + ulEndpoint)); +} + +//***************************************************************************** +// +//! Retrieves data from the given endpoint's FIFO. +//! +//! \param ulBase specifies the USB module base address. +//! \param ulEndpoint is the endpoint to access. +//! \param pucData is a pointer to the data area used to return the data from +//! the FIFO. +//! \param pulSize is initially the size of the buffer passed into this call +//! via the \e pucData parameter. It will be set to the amount of data +//! returned in the buffer. +//! +//! This function will return the data from the FIFO for the given endpoint. +//! The \e pulSize parameter should indicate the size of the buffer passed in +//! the \e pulData parameter. The data in the \e pulSize parameter will be +//! changed to match the amount of data returned in the \e pucData parameter. +//! If a zero byte packet was received this call will not return a error but +//! will instead just return a zero in the \e pulSize parameter. The only +//! error case occurs when there is no data packet available. +//! +//! \return This call will return 0, or -1 if no packet was received. +// +//***************************************************************************** +long +USBEndpointDataGet(unsigned long ulBase, unsigned long ulEndpoint, + unsigned char *pucData, unsigned long *pulSize) +{ + unsigned long ulRegister, ulByteCount, ulFIFO; + + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + ASSERT((ulEndpoint == USB_EP_0) || (ulEndpoint == USB_EP_1) || + (ulEndpoint == USB_EP_2) || (ulEndpoint == USB_EP_3) || + (ulEndpoint == USB_EP_4) || (ulEndpoint == USB_EP_5) || + (ulEndpoint == USB_EP_6) || (ulEndpoint == USB_EP_7) || + (ulEndpoint == USB_EP_8) || (ulEndpoint == USB_EP_9) || + (ulEndpoint == USB_EP_10) || (ulEndpoint == USB_EP_11) || + (ulEndpoint == USB_EP_12) || (ulEndpoint == USB_EP_13) || + (ulEndpoint == USB_EP_14) || (ulEndpoint == USB_EP_15)); + + // + // Get the address of the receive status register to use, based on the + // endpoint. + // + if(ulEndpoint == USB_EP_0) + { + ulRegister = USB_O_CSRL0; + } + else + { + ulRegister = USB_O_RXCSRL1 + EP_OFFSET(ulEndpoint); + } + + // + // Don't allow reading of data if the RxPktRdy bit is not set. + // + if((HWREGH(ulBase + ulRegister) & USB_CSRL0_RXRDY) == 0) + { + // + // Can't read the data because none is available. + // + *pulSize = 0; + + // + // Return a failure since there is no data to read. + // + return(-1); + } + + // + // Get the byte count in the FIFO. + // + ulByteCount = HWREGH(ulBase + USB_O_COUNT0 + ulEndpoint); + + // + // Determine how many bytes we will actually copy. + // + ulByteCount = (ulByteCount < *pulSize) ? ulByteCount : *pulSize; + + // + // Return the number of bytes we are going to read. + // + *pulSize = ulByteCount; + + // + // Calculate the FIFO address. + // + ulFIFO = ulBase + USB_O_FIFO0 + (ulEndpoint >> 2); + + // + // Read the data out of the FIFO. + // + for(; ulByteCount > 0; ulByteCount--) + { + // + // Read a byte at a time from the FIFO. + // + *pucData++ = HWREGB(ulFIFO); + } + + // + // Success. + // + return(0); +} + +//***************************************************************************** +// +//! Acknowledge that data was read from the given endpoint's FIFO in device +//! mode. +//! +//! \param ulBase specifies the USB module base address. +//! \param ulEndpoint is the endpoint to access. +//! \param bIsLastPacket indicates if this is the last packet. +//! +//! This function acknowledges that the data was read from the endpoint's FIFO. +//! The \e bIsLastPacket parameter is set to a \b true value if this is the +//! last in a series of data packets on endpoint zero. The \e bIsLastPacket +//! parameter is not used for endpoints other than endpoint zero. This call +//! can be used if processing is required between reading the data and +//! acknowledging that the data has been read. +//! +//! \note This function should only be called in device mode. +//! +//! \return None. +// +//***************************************************************************** +void +USBDevEndpointDataAck(unsigned long ulBase, unsigned long ulEndpoint, + tBoolean bIsLastPacket) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + ASSERT((ulEndpoint == USB_EP_0) || (ulEndpoint == USB_EP_1) || + (ulEndpoint == USB_EP_2) || (ulEndpoint == USB_EP_3) || + (ulEndpoint == USB_EP_4) || (ulEndpoint == USB_EP_5) || + (ulEndpoint == USB_EP_6) || (ulEndpoint == USB_EP_7) || + (ulEndpoint == USB_EP_8) || (ulEndpoint == USB_EP_9) || + (ulEndpoint == USB_EP_10) || (ulEndpoint == USB_EP_11) || + (ulEndpoint == USB_EP_12) || (ulEndpoint == USB_EP_13) || + (ulEndpoint == USB_EP_14) || (ulEndpoint == USB_EP_15)); + + // + // Determine which endpoint is being acked. + // + if(ulEndpoint == USB_EP_0) + { + // + // Clear RxPktRdy, and optionally DataEnd, on endpoint zero. + // + HWREGB(ulBase + USB_O_CSRL0) = + USB_CSRL0_RXRDYC | (bIsLastPacket ? USB_CSRL0_DATAEND : 0); + } + else + { + // + // Clear RxPktRdy on all other endpoints. + // + HWREGB(ulBase + USB_O_RXCSRL1 + EP_OFFSET(ulEndpoint)) &= + ~(USB_RXCSRL1_RXRDY); + } +} + +//***************************************************************************** +// +//! Acknowledge that data was read from the given endpoint's FIFO in host +//! mode. +//! +//! \param ulBase specifies the USB module base address. +//! \param ulEndpoint is the endpoint to access. +//! +//! This function acknowledges that the data was read from the endpoint's FIFO. +//! This call is used if processing is required between reading the data and +//! acknowledging that the data has been read. +//! +//! \note This function should only be called in host mode. +//! +//! \return None. +// +//***************************************************************************** +void +USBHostEndpointDataAck(unsigned long ulBase, unsigned long ulEndpoint) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + ASSERT((ulEndpoint == USB_EP_0) || (ulEndpoint == USB_EP_1) || + (ulEndpoint == USB_EP_2) || (ulEndpoint == USB_EP_3) || + (ulEndpoint == USB_EP_4) || (ulEndpoint == USB_EP_5) || + (ulEndpoint == USB_EP_6) || (ulEndpoint == USB_EP_7) || + (ulEndpoint == USB_EP_8) || (ulEndpoint == USB_EP_9) || + (ulEndpoint == USB_EP_10) || (ulEndpoint == USB_EP_11) || + (ulEndpoint == USB_EP_12) || (ulEndpoint == USB_EP_13) || + (ulEndpoint == USB_EP_14) || (ulEndpoint == USB_EP_15)); + + // + // Clear RxPktRdy. + // + if(ulEndpoint == USB_EP_0) + { + HWREGB(ulBase + USB_O_CSRL0) &= ~USB_CSRL0_RXRDY; + } + else + { + HWREGB(ulBase + USB_O_RXCSRL1 + EP_OFFSET(ulEndpoint)) &= + ~(USB_RXCSRL1_RXRDY); + } +} + +//***************************************************************************** +// +//! Puts data into the given endpoint's FIFO. +//! +//! \param ulBase specifies the USB module base address. +//! \param ulEndpoint is the endpoint to access. +//! \param pucData is a pointer to the data area used as the source for the +//! data to put into the FIFO. +//! \param ulSize is the amount of data to put into the FIFO. +//! +//! This function will put the data from the \e pucData parameter into the FIFO +//! for this endpoint. If a packet is already pending for transmission then +//! this call will not put any of the data into the FIFO and will return -1. +//! Care should be taken to not write more data than can fit into the FIFO +//! allocated by the call to USBFIFOConfig(). +//! +//! \return This call will return 0 on success, or -1 to indicate that the FIFO +//! is in use and cannot be written. +// +//***************************************************************************** +long +USBEndpointDataPut(unsigned long ulBase, unsigned long ulEndpoint, + unsigned char *pucData, unsigned long ulSize) +{ + unsigned long ulFIFO; + unsigned char ucTxPktRdy; + + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + ASSERT((ulEndpoint == USB_EP_0) || (ulEndpoint == USB_EP_1) || + (ulEndpoint == USB_EP_2) || (ulEndpoint == USB_EP_3) || + (ulEndpoint == USB_EP_4) || (ulEndpoint == USB_EP_5) || + (ulEndpoint == USB_EP_6) || (ulEndpoint == USB_EP_7) || + (ulEndpoint == USB_EP_8) || (ulEndpoint == USB_EP_9) || + (ulEndpoint == USB_EP_10) || (ulEndpoint == USB_EP_11) || + (ulEndpoint == USB_EP_12) || (ulEndpoint == USB_EP_13) || + (ulEndpoint == USB_EP_14) || (ulEndpoint == USB_EP_15)); + + // + // Get the bit position of TxPktRdy based on the endpoint. + // + if(ulEndpoint == USB_EP_0) + { + ucTxPktRdy = USB_CSRL0_TXRDY; + } + else + { + ucTxPktRdy = USB_TXCSRL1_TXRDY; + } + + // + // Don't allow transmit of data if the TxPktRdy bit is already set. + // + if(HWREGB(ulBase + USB_O_CSRL0 + ulEndpoint) & ucTxPktRdy) + { + return(-1); + } + + // + // Calculate the FIFO address. + // + ulFIFO = ulBase + USB_O_FIFO0 + (ulEndpoint >> 2); + + // + // Write the data to the FIFO. + // + for(; ulSize > 0; ulSize--) + { + HWREGB(ulFIFO) = *pucData++; + } + + // + // Success. + // + return(0); +} + +//***************************************************************************** +// +//! Starts the transfer of data from an endpoint's FIFO. +//! +//! \param ulBase specifies the USB module base address. +//! \param ulEndpoint is the endpoint to access. +//! \param ulTransType is set to indicate what type of data is being sent. +//! +//! This function will start the transfer of data from the FIFO for a given +//! endpoint. This is necessary if the \b USB_EP_AUTO_SET bit was not enabled +//! for the endpoint. Setting the \e ulTransType parameter will allow the +//! appropriate signaling on the USB bus for the type of transaction being +//! requested. The \e ulTransType parameter should be one of the following: +//! +//! - USB_TRANS_OUT for OUT transaction on any endpoint in host mode. +//! - USB_TRANS_IN for IN transaction on any endpoint in device mode. +//! - USB_TRANS_IN_LAST for the last IN transactions on endpoint zero in a +//! sequence of IN transactions. +//! - USB_TRANS_SETUP for setup transactions on endpoint zero. +//! - USB_TRANS_STATUS for status results on endpoint zero. +//! +//! \return This call will return 0 on success, or -1 if a transmission is +//! already in progress. +// +//***************************************************************************** +long +USBEndpointDataSend(unsigned long ulBase, unsigned long ulEndpoint, + unsigned long ulTransType) +{ + unsigned long ulTxPktRdy; + + // + // CHeck the arguments. + // + ASSERT(ulBase == USB0_BASE); + ASSERT((ulEndpoint == USB_EP_0) || (ulEndpoint == USB_EP_1) || + (ulEndpoint == USB_EP_2) || (ulEndpoint == USB_EP_3) || + (ulEndpoint == USB_EP_4) || (ulEndpoint == USB_EP_5) || + (ulEndpoint == USB_EP_6) || (ulEndpoint == USB_EP_7) || + (ulEndpoint == USB_EP_8) || (ulEndpoint == USB_EP_9) || + (ulEndpoint == USB_EP_10) || (ulEndpoint == USB_EP_11) || + (ulEndpoint == USB_EP_12) || (ulEndpoint == USB_EP_13) || + (ulEndpoint == USB_EP_14) || (ulEndpoint == USB_EP_15)); + + // + // Get the bit position of TxPktRdy based on the endpoint. + // + if(ulEndpoint == USB_EP_0) + { + ulTxPktRdy = ulTransType & 0xff; + } + else + { + ulTxPktRdy = (ulTransType >> 8) & 0xff; + } + + // + // Don't allow transmit of data if the TxPktRdy bit is already set. + // + if(HWREGB(ulBase + USB_O_CSRL0 + ulEndpoint) & USB_CSRL0_TXRDY) + { + return(-1); + } + + // + // Set TxPktRdy in order to send the data. + // + HWREGB(ulBase + USB_O_CSRL0 + ulEndpoint) = ulTxPktRdy; + + // + // Success. + // + return(0); +} + +//***************************************************************************** +// +//! Forces a flush of an endpoint's FIFO. +//! +//! \param ulBase specifies the USB module base address. +//! \param ulEndpoint is the endpoint to access. +//! \param ulFlags specifies if the IN or OUT endpoint should be accessed. +//! +//! This function will force the controller to flush out the data in the FIFO. +//! The function can be called with either host or device controllers and +//! requires the \e ulFlags parameter be one of \b USB_EP_HOST_OUT, +//! \b USB_EP_HOST_IN, \b USB_EP_DEV_OUT, or \b USB_EP_DEV_IN. +//! +//! \return None. +// +//***************************************************************************** +void +USBFIFOFlush(unsigned long ulBase, unsigned long ulEndpoint, + unsigned long ulFlags) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + ASSERT((ulEndpoint == USB_EP_0) || (ulEndpoint == USB_EP_1) || + (ulEndpoint == USB_EP_2) || (ulEndpoint == USB_EP_3) || + (ulEndpoint == USB_EP_4) || (ulEndpoint == USB_EP_5) || + (ulEndpoint == USB_EP_6) || (ulEndpoint == USB_EP_7) || + (ulEndpoint == USB_EP_8) || (ulEndpoint == USB_EP_9) || + (ulEndpoint == USB_EP_10) || (ulEndpoint == USB_EP_11) || + (ulEndpoint == USB_EP_12) || (ulEndpoint == USB_EP_13) || + (ulEndpoint == USB_EP_14) || (ulEndpoint == USB_EP_15)); + + // + // Endpoint zero has a different register set for FIFO flushing. + // + if(ulEndpoint == USB_EP_0) + { + // + // Nothing in the FIFO if neither of these bits are set. + // + if((HWREGB(ulBase + USB_O_CSRL0) & + (USB_CSRL0_RXRDY | USB_CSRL0_TXRDY)) != 0) + { + // + // Hit the Flush FIFO bit. + // + HWREGB(ulBase + USB_O_CSRH0) = USB_CSRH0_FLUSH; + } + } + else + { + // + // Only reset the IN or OUT FIFO. + // + if(ulFlags & (USB_EP_HOST_OUT | USB_EP_DEV_IN)) + { + // + // Make sure the FIFO is not empty. + // + if(HWREGB(ulBase + USB_O_TXCSRL1 + EP_OFFSET(ulEndpoint)) & + USB_TXCSRL1_TXRDY) + { + // + // Hit the Flush FIFO bit. + // + HWREGB(ulBase + USB_O_TXCSRL1 + EP_OFFSET(ulEndpoint)) |= + USB_TXCSRL1_FLUSH; + } + } + else + { + // + // Make sure that the FIFO is not empty. + // + if(HWREGB(ulBase + USB_O_RXCSRL1 + EP_OFFSET(ulEndpoint)) & + USB_RXCSRL1_RXRDY) + { + // + // Hit the Flush FIFO bit. + // + HWREGB(ulBase + USB_O_RXCSRL1 + EP_OFFSET(ulEndpoint)) |= + USB_RXCSRL1_FLUSH; + } + } + } +} + +//***************************************************************************** +// +//! Schedules a request for an IN transaction on an endpoint in host mode. +//! +//! \param ulBase specifies the USB module base address. +//! \param ulEndpoint is the endpoint to access. +//! +//! This function will schedule a request for an IN transaction. When the USB +//! device being communicated with responds the data, the data can be retrieved +//! by calling USBEndpointDataGet() or via a DMA transfer. +//! +//! \note This function should only be called in host mode. +//! +//! \return None. +// +//***************************************************************************** +void +USBHostRequestIN(unsigned long ulBase, unsigned long ulEndpoint) +{ + unsigned long ulRegister; + + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + ASSERT((ulEndpoint == USB_EP_0) || (ulEndpoint == USB_EP_1) || + (ulEndpoint == USB_EP_2) || (ulEndpoint == USB_EP_3) || + (ulEndpoint == USB_EP_4) || (ulEndpoint == USB_EP_5) || + (ulEndpoint == USB_EP_6) || (ulEndpoint == USB_EP_7) || + (ulEndpoint == USB_EP_8) || (ulEndpoint == USB_EP_9) || + (ulEndpoint == USB_EP_10) || (ulEndpoint == USB_EP_11) || + (ulEndpoint == USB_EP_12) || (ulEndpoint == USB_EP_13) || + (ulEndpoint == USB_EP_14) || (ulEndpoint == USB_EP_15)); + + // + // Endpoint zero uses a different offset than the other endpoints. + // + if(ulEndpoint == USB_EP_0) + { + ulRegister = USB_O_CSRL0; + } + else + { + ulRegister = USB_O_RXCSRL1 + EP_OFFSET(ulEndpoint); + } + + // + // Set the request for an IN transaction. + // + HWREGB(ulBase + ulRegister) = USB_RXCSRL1_REQPKT; +} + +//***************************************************************************** +// +//! Issues a request for a status IN transaction on endpoint zero. +//! +//! \param ulBase specifies the USB module base address. +//! +//! This function is used to cause a request for an status IN transaction from +//! a device on endpoint zero. This function can only be used with endpoint +//! zero as that is the only control endpoint that supports this ability. This +//! is used to complete the last phase of a control transaction to a device and +//! an interrupt will be signaled when the status packet has been received. +//! +//! \return None. +// +//***************************************************************************** +void +USBHostRequestStatus(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + + // + // Set the request for a status IN transaction. + // + HWREGB(ulBase + USB_O_CSRL0) = USB_CSRL0_REQPKT | USB_CSRL0_STATUS; +} + +//***************************************************************************** +// +//! Sets the functional address for the device that is connected to an +//! endpoint in host mode. +//! +//! \param ulBase specifies the USB module base address. +//! \param ulEndpoint is the endpoint to access. +//! \param ulAddr is the functional address for the controller to use for this +//! endpoint. +//! \param ulFlags determines if this is an IN or an OUT endpoint. +//! +//! This function will set the functional address for a device that is using +//! this endpoint for communication. This \e ulAddr parameter is the address +//! of the target device that this endpoint will be used to communicate with. +//! The \e ulFlags parameter indicates if the IN or OUT endpoint should be set. +//! +//! \note This function should only be called in host mode. +//! +//! \return None. +// +//***************************************************************************** +void +USBHostAddrSet(unsigned long ulBase, unsigned long ulEndpoint, + unsigned long ulAddr, unsigned long ulFlags) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + ASSERT((ulEndpoint == USB_EP_0) || (ulEndpoint == USB_EP_1) || + (ulEndpoint == USB_EP_2) || (ulEndpoint == USB_EP_3) || + (ulEndpoint == USB_EP_4) || (ulEndpoint == USB_EP_5) || + (ulEndpoint == USB_EP_6) || (ulEndpoint == USB_EP_7) || + (ulEndpoint == USB_EP_8) || (ulEndpoint == USB_EP_9) || + (ulEndpoint == USB_EP_10) || (ulEndpoint == USB_EP_11) || + (ulEndpoint == USB_EP_12) || (ulEndpoint == USB_EP_13) || + (ulEndpoint == USB_EP_14) || (ulEndpoint == USB_EP_15)); + + // + // See if the transmit or receive address should be set. + // + if(ulFlags & USB_EP_HOST_OUT) + { + // + // Set the transmit address. + // + HWREGB(ulBase + USB_O_TXFUNCADDR0 + (ulEndpoint >> 1)) = ulAddr; + } + else + { + // + // Set the receive address. + // + HWREGB(ulBase + USB_O_TXFUNCADDR0 + 4 + (ulEndpoint >> 1)) = ulAddr; + } +} + +//***************************************************************************** +// +//! Gets the current functional device address for an endpoint. +//! +//! \param ulBase specifies the USB module base address. +//! \param ulEndpoint is the endpoint to access. +//! \param ulFlags determines if this is an IN or an OUT endpoint. +//! +//! This function returns the current functional address that an endpoint is +//! using to communicate with a device. The \e ulFlags parameter determines if +//! the IN or OUT endpoint's device address is returned. +//! +//! \note This function should only be called in host mode. +//! +//! \return Returns the current function address being used by an endpoint. +// +//***************************************************************************** +unsigned long +USBHostAddrGet(unsigned long ulBase, unsigned long ulEndpoint, + unsigned long ulFlags) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + ASSERT((ulEndpoint == USB_EP_0) || (ulEndpoint == USB_EP_1) || + (ulEndpoint == USB_EP_2) || (ulEndpoint == USB_EP_3) || + (ulEndpoint == USB_EP_4) || (ulEndpoint == USB_EP_5) || + (ulEndpoint == USB_EP_6) || (ulEndpoint == USB_EP_7) || + (ulEndpoint == USB_EP_8) || (ulEndpoint == USB_EP_9) || + (ulEndpoint == USB_EP_10) || (ulEndpoint == USB_EP_11) || + (ulEndpoint == USB_EP_12) || (ulEndpoint == USB_EP_13) || + (ulEndpoint == USB_EP_14) || (ulEndpoint == USB_EP_15)); + + // + // See if the transmit or receive address should be returned. + // + if(ulFlags & USB_EP_HOST_OUT) + { + // + // Return this endpoint's transmit address. + // + return(HWREGB(ulBase + USB_O_TXFUNCADDR0 + (ulEndpoint >> 1))); + } + else + { + // + // Return this endpoint's receive address. + // + return(HWREGB(ulBase + USB_O_TXFUNCADDR0 + 4 + (ulEndpoint >> 1))); + } +} + +//***************************************************************************** +// +//! Set the hub address for the device that is connected to an endpoint. +//! +//! \param ulBase specifies the USB module base address. +//! \param ulEndpoint is the endpoint to access. +//! \param ulAddr is the hub address for the device using this endpoint. +//! \param ulFlags determines if this is an IN or an OUT endpoint. +//! +//! This function will set the hub address for a device that is using this +//! endpoint for communication. The \e ulFlags parameter determines if the +//! device address for the IN or the OUT endpoint is set by this call. +//! +//! \note This function should only be called in host mode. +//! +//! \return None. +// +//***************************************************************************** +void +USBHostHubAddrSet(unsigned long ulBase, unsigned long ulEndpoint, + unsigned long ulAddr, unsigned long ulFlags) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + ASSERT((ulEndpoint == USB_EP_0) || (ulEndpoint == USB_EP_1) || + (ulEndpoint == USB_EP_2) || (ulEndpoint == USB_EP_3) || + (ulEndpoint == USB_EP_4) || (ulEndpoint == USB_EP_5) || + (ulEndpoint == USB_EP_6) || (ulEndpoint == USB_EP_7) || + (ulEndpoint == USB_EP_8) || (ulEndpoint == USB_EP_9) || + (ulEndpoint == USB_EP_10) || (ulEndpoint == USB_EP_11) || + (ulEndpoint == USB_EP_12) || (ulEndpoint == USB_EP_13) || + (ulEndpoint == USB_EP_14) || (ulEndpoint == USB_EP_15)); + + // + // See if the hub transmit or receive address is being set. + // + if(ulFlags & USB_EP_HOST_OUT) + { + // + // Set the hub transmit address for this endpoint. + // + HWREGB(ulBase + USB_O_TXHUBADDR0 + (ulEndpoint >> 1)) = ulAddr; + } + else + { + // + // Set the hub receive address for this endpoint. + // + HWREGB(ulBase + USB_O_TXHUBADDR0 + 4 + (ulEndpoint >> 1)) = ulAddr; + } +} + +//***************************************************************************** +// +//! Get the current device hub address for this endpoint. +//! +//! \param ulBase specifies the USB module base address. +//! \param ulEndpoint is the endpoint to access. +//! \param ulFlags determines if this is an IN or an OUT endpoint. +//! +//! This function will return the current hub address that an endpoint is using +//! to communicate with a device. The \e ulFlags parameter determines if the +//! device address for the IN or OUT endpoint is returned. +//! +//! \note This function should only be called in host mode. +//! +//! \return This function returns the current hub address being used by an +//! endpoint. +// +//***************************************************************************** +unsigned long +USBHostHubAddrGet(unsigned long ulBase, unsigned long ulEndpoint, + unsigned long ulFlags) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + ASSERT((ulEndpoint == USB_EP_0) || (ulEndpoint == USB_EP_1) || + (ulEndpoint == USB_EP_2) || (ulEndpoint == USB_EP_3) || + (ulEndpoint == USB_EP_4) || (ulEndpoint == USB_EP_5) || + (ulEndpoint == USB_EP_6) || (ulEndpoint == USB_EP_7) || + (ulEndpoint == USB_EP_8) || (ulEndpoint == USB_EP_9) || + (ulEndpoint == USB_EP_10) || (ulEndpoint == USB_EP_11) || + (ulEndpoint == USB_EP_12) || (ulEndpoint == USB_EP_13) || + (ulEndpoint == USB_EP_14) || (ulEndpoint == USB_EP_15)); + + // + // See if the hub transmit or receive address should be returned. + // + if(ulFlags & USB_EP_HOST_OUT) + { + // + // Return the hub transmit address for this endpoint. + // + return(HWREGB(ulBase + USB_O_TXHUBADDR0 + (ulEndpoint >> 1))); + } + else + { + // + // Return the hub receive address for this endpoint. + // + return(HWREGB(ulBase + USB_O_TXHUBADDR0 + 4 + (ulEndpoint >> 1))); + } +} + +//***************************************************************************** +// +//! Sets the configuration for USB power fault. +//! +//! \param ulBase specifies the USB module base address. +//! \param ulFlags specifies the configuration of the power fault. +//! +//! This function controls how the USB controller uses its external power +//! control pins(USBnPFTL and USBnEPEN). The flags specify the power +//! fault level sensitivity, the power fault action, and the power enable level +//! and source. +//! +//! One of the following can be selected as the power fault level +//! sensitivity: +//! +//! - \b USB_HOST_PWRFLT_LOW - An external power fault is indicated by the pin +//! being driven low. +//! - \b USB_HOST_PWRFLT_HIGH - An external power fault is indicated by the pin +//! being driven high. +//! +//! One of the following can be selected as the power fault action: +//! +//! - \b USB_HOST_PWRFLT_EP_NONE - No automatic action when power fault +//! detected. +//! - \b USB_HOST_PWRFLT_EP_TRI - Automatically Tri-state the USBnEPEN pin on a +//! power fault. +//! - \b USB_HOST_PWRFLT_EP_LOW - Automatically drive USBnEPEN pin low on a +//! power fault. +//! - \b USB_HOST_PWRFLT_EP_HIGH - Automatically drive USBnEPEN pin high on a +//! power fault. +//! +//! One of the following can be selected as the power enable level and source: +//! +//! - \b USB_HOST_PWREN_MAN_LOW - USBEPEN is driven low by the USB controller +//! when USBHostPwrEnable() is called. +//! - \b USB_HOST_PWREN_MAN_HIGH - USBEPEN is driven high by the USB controller +//! when USBHostPwrEnable() is called. +//! - \b USB_HOST_PWREN_AUTOLOW - USBEPEN is driven low by the USB controller +//! automatically if USBOTGSessionRequest() has +//! enabled a session. +//! - \b USB_HOST_PWREN_AUTOHIGH - USBEPEN is driven high by the USB controller +//! automatically if USBOTGSessionRequest() has +//! enabled a session. +//! +//! On devices that support the VBUS glitch filter, the +//! \b USB_HOST_PWREN_FILTER can be added to ignore small short drops in VBUS +//! level caused by high power consumption. This is mainly used to avoid +//! causing VBUS errors caused by devices with high in-rush current. +//! +//! \note The following values have been deprecated and should no longer be +//! used. +//! - \b USB_HOST_PWREN_LOW - Automatically drive USBnEPEN low when power is +//! enabled. +//! - \b USB_HOST_PWREN_HIGH - Automatically drive USBnEPEN high when power is +//! enabled. +//! - \b USB_HOST_PWREN_VBLOW - Automatically drive USBnEPEN low when power is +//! enabled. +//! - \b USB_HOST_PWREN_VBHIGH - Automatically drive USBnEPEN high when power is +//! enabled. +//! +//! \note This function should only be called on microcontrollers that support +//! host mode or OTG operation. +//! +//! \return None. +// +//***************************************************************************** +void +USBHostPwrConfig(unsigned long ulBase, unsigned long ulFlags) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + ASSERT((ulFlags & ~(USB_EPC_PFLTACT_M | USB_EPC_PFLTAEN | + USB_EPC_PFLTSEN_HIGH | USB_EPC_EPEN_M)) == 0); + + // + // If requested, enable VBUS droop detection on parts that support this + // feature. + // + HWREG(ulBase + USB_O_VDC) = ulFlags >> 16; + + // + // Set the power fault configuration as specified. This will not change + // whether fault detection is enabled or not. + // + HWREGH(ulBase + USB_O_EPC) = + (ulFlags | (HWREGH(ulBase + USB_O_EPC) & + ~(USB_EPC_PFLTACT_M | USB_EPC_PFLTAEN | + USB_EPC_PFLTSEN_HIGH | USB_EPC_EPEN_M))); +} + +//***************************************************************************** +// +//! Enables power fault detection. +//! +//! \param ulBase specifies the USB module base address. +//! +//! This function enables power fault detection in the USB controller. If the +//! USBPFLT pin is not in use this function should not be used. +//! +//! \note This function should only be called in host mode. +//! +//! \return None. +// +//***************************************************************************** +void +USBHostPwrFaultEnable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + + // + // Enable power fault input. + // + HWREGH(ulBase + USB_O_EPC) |= USB_EPC_PFLTEN; +} + +//***************************************************************************** +// +//! Disables power fault detection. +//! +//! \param ulBase specifies the USB module base address. +//! +//! This function disables power fault detection in the USB controller. +//! +//! \note This function should only be called in host mode. +//! +//! \return None. +// +//***************************************************************************** +void +USBHostPwrFaultDisable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + + // + // Enable power fault input. + // + HWREGH(ulBase + USB_O_EPC) &= ~USB_EPC_PFLTEN; +} + +//***************************************************************************** +// +//! Enables the external power pin. +//! +//! \param ulBase specifies the USB module base address. +//! +//! This function enables the USBEPEN signal to enable an external power supply +//! in host mode operation. +//! +//! \note This function should only be called in host mode. +//! +//! \return None. +// +//***************************************************************************** +void +USBHostPwrEnable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + + // + // Enable the external power supply enable signal. + // + HWREGH(ulBase + USB_O_EPC) |= USB_EPC_EPENDE; +} + +//***************************************************************************** +// +//! Disables the external power pin. +//! +//! \param ulBase specifies the USB module base address. +//! +//! This function disables the USBEPEN signal to disable an external power +//! supply in host mode operation. +//! +//! \note This function should only be called in host mode. +//! +//! \return None. +// +//***************************************************************************** +void +USBHostPwrDisable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + + // + // Disable the external power supply enable signal. + // + HWREGH(ulBase + USB_O_EPC) &= ~USB_EPC_EPENDE; +} + +//***************************************************************************** +// +//! Get the current frame number. +//! +//! \param ulBase specifies the USB module base address. +//! +//! This function returns the last frame number received. +//! +//! \return The last frame number received. +// +//***************************************************************************** +unsigned long +USBFrameNumberGet(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + + // + // Return the most recent frame number. + // + return(HWREGH(ulBase + USB_O_FRAME)); +} + +//***************************************************************************** +// +//! Starts or ends a session. +//! +//! \param ulBase specifies the USB module base address. +//! \param bStart specifies if this call starts or ends a session. +//! +//! This function is used in OTG mode to start a session request or end a +//! session. If the \e bStart parameter is set to \b true, then this function +//! start a session and if it is \b false it will end a session. +//! +//! \return None. +// +//***************************************************************************** +void +USBOTGSessionRequest(unsigned long ulBase, tBoolean bStart) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + + // + // Start or end the session as directed. + // + if(bStart) + { + HWREGB(ulBase + USB_O_DEVCTL) |= USB_DEVCTL_SESSION; + } + else + { + HWREGB(ulBase + USB_O_DEVCTL) &= ~USB_DEVCTL_SESSION; + } +} + +//***************************************************************************** +// +//! Returns the absolute FIFO address for a given endpoint. +//! +//! \param ulBase specifies the USB module base address. +//! \param ulEndpoint specifies which endpoint's FIFO address to return. +//! +//! This function returns the actual physical address of the FIFO. This is +//! needed when the USB is going to be used with the uDMA controller and the +//! source or destination address needs to be set to the physical FIFO address +//! for a given endpoint. +//! +//! \return None. +// +//***************************************************************************** +unsigned long +USBFIFOAddrGet(unsigned long ulBase, unsigned long ulEndpoint) +{ + // + // Return the FIFO address for this endpoint. + // + return(ulBase + USB_O_FIFO0 + (ulEndpoint >> 2)); +} + +//***************************************************************************** +// +//! Returns the current operating mode of the controller. +//! +//! \param ulBase specifies the USB module base address. +//! +//! This function returns the current operating mode on USB controllers with +//! OTG or Dual mode functionality. +//! +//! For OTG controllers: +//! +//! The function will return on of the following values on OTG controllers: +//! \b USB_OTG_MODE_ASIDE_HOST, \b USB_OTG_MODE_ASIDE_DEV, +//! \b USB_OTG_MODE_BSIDE_HOST, \b USB_OTG_MODE_BSIDE_DEV, +//! \b USB_OTG_MODE_NONE. +//! +//! \b USB_OTG_MODE_ASIDE_HOST indicates that the controller is in host mode +//! on the A-side of the cable. +//! +//! \b USB_OTG_MODE_ASIDE_DEV indicates that the controller is in device mode +//! on the A-side of the cable. +//! +//! \b USB_OTG_MODE_BSIDE_HOST indicates that the controller is in host mode +//! on the B-side of the cable. +//! +//! \b USB_OTG_MODE_BSIDE_DEV indicates that the controller is in device mode +//! on the B-side of the cable. If and OTG session request is started with no +//! cable in place this is the default mode for the controller. +//! +//! \b USB_OTG_MODE_NONE indicates that the controller is not attempting to +//! determine its role in the system. +//! +//! For Dual Mode controllers: +//! +//! The function will return on of the following values: +//! \b USB_DUAL_MODE_HOST, \b USB_DUAL_MODE_DEVICE, or +//! \b USB_DUAL_MODE_NONE. +//! +//! \b USB_DUAL_MODE_HOST indicates that the controller is acting as a host. +//! +//! \b USB_DUAL_MODE_DEVICE indicates that the controller acting as a device. +//! +//! \b USB_DUAL_MODE_NONE indicates that the controller is not active as +//! either a host or device. +//! +//! \return Returns \b USB_OTG_MODE_ASIDE_HOST, \b USB_OTG_MODE_ASIDE_DEV, +//! \b USB_OTG_MODE_BSIDE_HOST, \b USB_OTG_MODE_BSIDE_DEV, +//! \b USB_OTG_MODE_NONE, \b USB_DUAL_MODE_HOST, \b USB_DUAL_MODE_DEVICE, or +//! \b USB_DUAL_MODE_NONE. +// +//***************************************************************************** +unsigned long +USBModeGet(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + + // + // Checks the current mode in the USB_O_DEVCTL and returns the current + // mode. + // + // USB_OTG_MODE_ASIDE_HOST: USB_DEVCTL_HOST | USB_DEVCTL_SESSION + // USB_OTG_MODE_ASIDE_DEV: USB_DEVCTL_SESSION + // USB_OTG_MODE_BSIDE_HOST: USB_DEVCTL_DEV | USB_DEVCTL_SESSION | + // USB_DEVCTL_HOST + // USB_OTG_MODE_BSIDE_DEV: USB_DEVCTL_DEV | USB_DEVCTL_SESSION + // USB_OTG_MODE_NONE: USB_DEVCTL_DEV + // + return(HWREGB(ulBase + USB_O_DEVCTL) & + (USB_DEVCTL_DEV | USB_DEVCTL_HOST | USB_DEVCTL_SESSION | + USB_DEVCTL_VBUS_M)); +} + +//***************************************************************************** +// +//! Sets the DMA channel to use for a given endpoint. +//! +//! \param ulBase specifies the USB module base address. +//! \param ulEndpoint specifies which endpoint's FIFO address to return. +//! \param ulChannel specifies which DMA channel to use for which endpoint. +//! +//! This function is used to configure which DMA channel to use with a given +//! endpoint. Receive DMA channels can only be used with receive endpoints +//! and transmit DMA channels can only be used with transmit endpoints. This +//! allows the 3 receive and 3 transmit DMA channels to be mapped to any +//! endpoint other than 0. The values that should be passed into the \e +//! ulChannel value are the UDMA_CHANNEL_USBEP* values defined in udma.h. +//! +//! \note This function only has an effect on microcontrollers that have the +//! ability to change the DMA channel for an endpoint. Calling this function +//! on other devices will have no effect. +//! +//! \return None. +//! +//***************************************************************************** +void +USBEndpointDMAChannel(unsigned long ulBase, unsigned long ulEndpoint, + unsigned long ulChannel) +{ + unsigned long ulMask; + + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + ASSERT((ulEndpoint == USB_EP_1) || (ulEndpoint == USB_EP_2) || + (ulEndpoint == USB_EP_3) || (ulEndpoint == USB_EP_4) || + (ulEndpoint == USB_EP_5) || (ulEndpoint == USB_EP_6) || + (ulEndpoint == USB_EP_7) || (ulEndpoint == USB_EP_8) || + (ulEndpoint == USB_EP_9) || (ulEndpoint == USB_EP_10) || + (ulEndpoint == USB_EP_11) || (ulEndpoint == USB_EP_12) || + (ulEndpoint == USB_EP_13) || (ulEndpoint == USB_EP_14) || + (ulEndpoint == USB_EP_15)); + ASSERT(ulChannel <= UDMA_CHANNEL_USBEP3TX); + + // + // The input select mask needs to be shifted into the correct position + // based on the channel. + // + ulMask = 0xf << (ulChannel * 4); + + // + // Clear out the current selection for the channel. + // + ulMask = HWREG(ulBase + USB_O_DMASEL) & (~ulMask); + + // + // The input select is now shifted into the correct position based on the + // channel. + // + ulMask |= (USB_EP_TO_INDEX(ulEndpoint)) << (ulChannel * 4); + + // + // Write the value out to the register. + // + HWREG(ulBase + USB_O_DMASEL) = ulMask; +} + +//***************************************************************************** +// +//! Change the mode of the USB controller to host. +//! +//! \param ulBase specifies the USB module base address. +//! +//! This function changes the mode of the USB controller to host mode. This +//! is only valid on microcontrollers that have the host and device +//! capabilities and not the OTG capabilities. +//! +//! \return None. +// +//***************************************************************************** +void +USBHostMode(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + + // + // Force mode in OTG parts that support forcing USB controller mode. + // This bit is not writable in USB controllers that do not support + // forcing the mode. Not setting the USB_GPCS_DEVMOD bit makes this a + // force of host mode. + // + HWREGB(ulBase + USB_O_GPCS) = USB_GPCS_DEVMODOTG; +} + +//***************************************************************************** +// +//! Change the mode of the USB controller to device. +//! +//! \param ulBase specifies the USB module base address. +//! +//! This function changes the mode of the USB controller to device mode. This +//! is only valid on microcontrollers that have the host and device +//! capabilities and not the OTG capabilities. +//! +//! \return None. +// +//***************************************************************************** +void +USBDevMode(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT(ulBase == USB0_BASE); + + // + // Set the USB controller mode to device. + // + HWREGB(ulBase + USB_O_GPCS) = USB_GPCS_DEVMODOTG | USB_GPCS_DEVMOD; +} + +//***************************************************************************** +// +// Close the Doxygen group. +//! @} +// +//***************************************************************************** diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/usb.h b/bsp/lm3s_9b9x/Libraries/driverlib/usb.h new file mode 100644 index 0000000000000000000000000000000000000000..5c5b8638eb396ca8ffc07deedc38c8668849fb9b --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/usb.h @@ -0,0 +1,565 @@ +//***************************************************************************** +// +// usb.h - Prototypes for the USB Interface Driver. +// +// Copyright (c) 2007-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +#ifndef __USB_H__ +#define __USB_H__ + +//***************************************************************************** +// +// If building with a C++ compiler, make all of the definitions in this header +// have a C binding. +// +//***************************************************************************** +#ifdef __cplusplus +extern "C" +{ +#endif + +//***************************************************************************** +// +// The following are values that can be passed to USBIntEnableControl() and +// USBIntDisableControl() as the ulFlags parameter, and are returned from +// USBIntStatusControl(). +// +//***************************************************************************** +#define USB_INTCTRL_ALL 0x000003FF // All control interrupt sources +#define USB_INTCTRL_STATUS 0x000000FF // Status Interrupts +#define USB_INTCTRL_VBUS_ERR 0x00000080 // VBUS Error +#define USB_INTCTRL_SESSION 0x00000040 // Session Start Detected +#define USB_INTCTRL_SESSION_END 0x00000040 // Session End Detected +#define USB_INTCTRL_DISCONNECT 0x00000020 // Disconnect Detected +#define USB_INTCTRL_CONNECT 0x00000010 // Device Connect Detected +#define USB_INTCTRL_SOF 0x00000008 // Start of Frame Detected +#define USB_INTCTRL_BABBLE 0x00000004 // Babble signaled +#define USB_INTCTRL_RESET 0x00000004 // Reset signaled +#define USB_INTCTRL_RESUME 0x00000002 // Resume detected +#define USB_INTCTRL_SUSPEND 0x00000001 // Suspend detected +#define USB_INTCTRL_MODE_DETECT 0x00000200 // Mode value valid +#define USB_INTCTRL_POWER_FAULT 0x00000100 // Power Fault detected + +//***************************************************************************** +// +// The following are values that can be passed to USBIntEnableEndpoint() and +// USBIntDisableEndpoint() as the ulFlags parameter, and are returned from +// USBIntStatusEndpoint(). +// +//***************************************************************************** +#define USB_INTEP_ALL 0xFFFFFFFF // Host IN Interrupts +#define USB_INTEP_HOST_IN 0xFFFE0000 // Host IN Interrupts +#define USB_INTEP_HOST_IN_15 0x80000000 // Endpoint 15 Host IN Interrupt +#define USB_INTEP_HOST_IN_14 0x40000000 // Endpoint 14 Host IN Interrupt +#define USB_INTEP_HOST_IN_13 0x20000000 // Endpoint 13 Host IN Interrupt +#define USB_INTEP_HOST_IN_12 0x10000000 // Endpoint 12 Host IN Interrupt +#define USB_INTEP_HOST_IN_11 0x08000000 // Endpoint 11 Host IN Interrupt +#define USB_INTEP_HOST_IN_10 0x04000000 // Endpoint 10 Host IN Interrupt +#define USB_INTEP_HOST_IN_9 0x02000000 // Endpoint 9 Host IN Interrupt +#define USB_INTEP_HOST_IN_8 0x01000000 // Endpoint 8 Host IN Interrupt +#define USB_INTEP_HOST_IN_7 0x00800000 // Endpoint 7 Host IN Interrupt +#define USB_INTEP_HOST_IN_6 0x00400000 // Endpoint 6 Host IN Interrupt +#define USB_INTEP_HOST_IN_5 0x00200000 // Endpoint 5 Host IN Interrupt +#define USB_INTEP_HOST_IN_4 0x00100000 // Endpoint 4 Host IN Interrupt +#define USB_INTEP_HOST_IN_3 0x00080000 // Endpoint 3 Host IN Interrupt +#define USB_INTEP_HOST_IN_2 0x00040000 // Endpoint 2 Host IN Interrupt +#define USB_INTEP_HOST_IN_1 0x00020000 // Endpoint 1 Host IN Interrupt + +#define USB_INTEP_DEV_OUT 0xFFFE0000 // Device OUT Interrupts +#define USB_INTEP_DEV_OUT_15 0x80000000 // Endpoint 15 Device OUT Interrupt +#define USB_INTEP_DEV_OUT_14 0x40000000 // Endpoint 14 Device OUT Interrupt +#define USB_INTEP_DEV_OUT_13 0x20000000 // Endpoint 13 Device OUT Interrupt +#define USB_INTEP_DEV_OUT_12 0x10000000 // Endpoint 12 Device OUT Interrupt +#define USB_INTEP_DEV_OUT_11 0x08000000 // Endpoint 11 Device OUT Interrupt +#define USB_INTEP_DEV_OUT_10 0x04000000 // Endpoint 10 Device OUT Interrupt +#define USB_INTEP_DEV_OUT_9 0x02000000 // Endpoint 9 Device OUT Interrupt +#define USB_INTEP_DEV_OUT_8 0x01000000 // Endpoint 8 Device OUT Interrupt +#define USB_INTEP_DEV_OUT_7 0x00800000 // Endpoint 7 Device OUT Interrupt +#define USB_INTEP_DEV_OUT_6 0x00400000 // Endpoint 6 Device OUT Interrupt +#define USB_INTEP_DEV_OUT_5 0x00200000 // Endpoint 5 Device OUT Interrupt +#define USB_INTEP_DEV_OUT_4 0x00100000 // Endpoint 4 Device OUT Interrupt +#define USB_INTEP_DEV_OUT_3 0x00080000 // Endpoint 3 Device OUT Interrupt +#define USB_INTEP_DEV_OUT_2 0x00040000 // Endpoint 2 Device OUT Interrupt +#define USB_INTEP_DEV_OUT_1 0x00020000 // Endpoint 1 Device OUT Interrupt + +#define USB_INTEP_HOST_OUT 0x0000FFFE // Host OUT Interrupts +#define USB_INTEP_HOST_OUT_15 0x00008000 // Endpoint 15 Host OUT Interrupt +#define USB_INTEP_HOST_OUT_14 0x00004000 // Endpoint 14 Host OUT Interrupt +#define USB_INTEP_HOST_OUT_13 0x00002000 // Endpoint 13 Host OUT Interrupt +#define USB_INTEP_HOST_OUT_12 0x00001000 // Endpoint 12 Host OUT Interrupt +#define USB_INTEP_HOST_OUT_11 0x00000800 // Endpoint 11 Host OUT Interrupt +#define USB_INTEP_HOST_OUT_10 0x00000400 // Endpoint 10 Host OUT Interrupt +#define USB_INTEP_HOST_OUT_9 0x00000200 // Endpoint 9 Host OUT Interrupt +#define USB_INTEP_HOST_OUT_8 0x00000100 // Endpoint 8 Host OUT Interrupt +#define USB_INTEP_HOST_OUT_7 0x00000080 // Endpoint 7 Host OUT Interrupt +#define USB_INTEP_HOST_OUT_6 0x00000040 // Endpoint 6 Host OUT Interrupt +#define USB_INTEP_HOST_OUT_5 0x00000020 // Endpoint 5 Host OUT Interrupt +#define USB_INTEP_HOST_OUT_4 0x00000010 // Endpoint 4 Host OUT Interrupt +#define USB_INTEP_HOST_OUT_3 0x00000008 // Endpoint 3 Host OUT Interrupt +#define USB_INTEP_HOST_OUT_2 0x00000004 // Endpoint 2 Host OUT Interrupt +#define USB_INTEP_HOST_OUT_1 0x00000002 // Endpoint 1 Host OUT Interrupt + +#define USB_INTEP_DEV_IN 0x0000FFFE // Device IN Interrupts +#define USB_INTEP_DEV_IN_15 0x00008000 // Endpoint 15 Device IN Interrupt +#define USB_INTEP_DEV_IN_14 0x00004000 // Endpoint 14 Device IN Interrupt +#define USB_INTEP_DEV_IN_13 0x00002000 // Endpoint 13 Device IN Interrupt +#define USB_INTEP_DEV_IN_12 0x00001000 // Endpoint 12 Device IN Interrupt +#define USB_INTEP_DEV_IN_11 0x00000800 // Endpoint 11 Device IN Interrupt +#define USB_INTEP_DEV_IN_10 0x00000400 // Endpoint 10 Device IN Interrupt +#define USB_INTEP_DEV_IN_9 0x00000200 // Endpoint 9 Device IN Interrupt +#define USB_INTEP_DEV_IN_8 0x00000100 // Endpoint 8 Device IN Interrupt +#define USB_INTEP_DEV_IN_7 0x00000080 // Endpoint 7 Device IN Interrupt +#define USB_INTEP_DEV_IN_6 0x00000040 // Endpoint 6 Device IN Interrupt +#define USB_INTEP_DEV_IN_5 0x00000020 // Endpoint 5 Device IN Interrupt +#define USB_INTEP_DEV_IN_4 0x00000010 // Endpoint 4 Device IN Interrupt +#define USB_INTEP_DEV_IN_3 0x00000008 // Endpoint 3 Device IN Interrupt +#define USB_INTEP_DEV_IN_2 0x00000004 // Endpoint 2 Device IN Interrupt +#define USB_INTEP_DEV_IN_1 0x00000002 // Endpoint 1 Device IN Interrupt + +#define USB_INTEP_0 0x00000001 // Endpoint 0 Interrupt + +//***************************************************************************** +// +// The following are values that are returned from USBSpeedGet(). +// +//***************************************************************************** +#define USB_UNDEF_SPEED 0x80000000 // Current speed is undefined +#define USB_FULL_SPEED 0x00000001 // Current speed is Full Speed +#define USB_LOW_SPEED 0x00000000 // Current speed is Low Speed + +//***************************************************************************** +// +// The following are values that are returned from USBEndpointStatus(). The +// USB_HOST_* values are used when the USB controller is in host mode and the +// USB_DEV_* values are used when the USB controller is in device mode. +// +//***************************************************************************** +#define USB_HOST_IN_PID_ERROR 0x01000000 // Stall on this endpoint received +#define USB_HOST_IN_NOT_COMP 0x00100000 // Device failed to respond +#define USB_HOST_IN_STALL 0x00400000 // Stall on this endpoint received +#define USB_HOST_IN_DATA_ERROR 0x00080000 // CRC or bit-stuff error + // (ISOC Mode) +#define USB_HOST_IN_NAK_TO 0x00080000 // NAK received for more than the + // specified timeout period +#define USB_HOST_IN_ERROR 0x00040000 // Failed to communicate with a + // device +#define USB_HOST_IN_FIFO_FULL 0x00020000 // RX FIFO full +#define USB_HOST_IN_PKTRDY 0x00010000 // Data packet ready +#define USB_HOST_OUT_NAK_TO 0x00000080 // NAK received for more than the + // specified timeout period +#define USB_HOST_OUT_NOT_COMP 0x00000080 // No response from device + // (ISOC mode) +#define USB_HOST_OUT_STALL 0x00000020 // Stall on this endpoint received +#define USB_HOST_OUT_ERROR 0x00000004 // Failed to communicate with a + // device +#define USB_HOST_OUT_FIFO_NE 0x00000002 // TX FIFO is not empty +#define USB_HOST_OUT_PKTPEND 0x00000001 // Transmit still being transmitted +#define USB_HOST_EP0_NAK_TO 0x00000080 // NAK received for more than the + // specified timeout period +#define USB_HOST_EP0_STATUS 0x00000040 // This was a status packet +#define USB_HOST_EP0_ERROR 0x00000010 // Failed to communicate with a + // device +#define USB_HOST_EP0_RX_STALL 0x00000004 // Stall on this endpoint received +#define USB_HOST_EP0_RXPKTRDY 0x00000001 // Receive data packet ready +#define USB_DEV_RX_SENT_STALL 0x00400000 // Stall was sent on this endpoint +#define USB_DEV_RX_DATA_ERROR 0x00080000 // CRC error on the data +#define USB_DEV_RX_OVERRUN 0x00040000 // OUT packet was not loaded due to + // a full FIFO +#define USB_DEV_RX_FIFO_FULL 0x00020000 // RX FIFO full +#define USB_DEV_RX_PKT_RDY 0x00010000 // Data packet ready +#define USB_DEV_TX_NOT_COMP 0x00000080 // Large packet split up, more data + // to come +#define USB_DEV_TX_SENT_STALL 0x00000020 // Stall was sent on this endpoint +#define USB_DEV_TX_UNDERRUN 0x00000004 // IN received with no data ready +#define USB_DEV_TX_FIFO_NE 0x00000002 // The TX FIFO is not empty +#define USB_DEV_TX_TXPKTRDY 0x00000001 // Transmit still being transmitted +#define USB_DEV_EP0_SETUP_END 0x00000010 // Control transaction ended before + // Data End seen +#define USB_DEV_EP0_SENT_STALL 0x00000004 // Stall was sent on this endpoint +#define USB_DEV_EP0_IN_PKTPEND 0x00000002 // Transmit data packet pending +#define USB_DEV_EP0_OUT_PKTRDY 0x00000001 // Receive data packet ready + +//***************************************************************************** +// +// The following are values that can be passed to USBHostEndpointConfig() and +// USBDevEndpointConfigSet() as the ulFlags parameter. +// +//***************************************************************************** +#define USB_EP_AUTO_SET 0x00000001 // Auto set feature enabled +#define USB_EP_AUTO_REQUEST 0x00000002 // Auto request feature enabled +#define USB_EP_AUTO_CLEAR 0x00000004 // Auto clear feature enabled +#define USB_EP_DMA_MODE_0 0x00000008 // Enable DMA access using mode 0 +#define USB_EP_DMA_MODE_1 0x00000010 // Enable DMA access using mode 1 +#define USB_EP_MODE_ISOC 0x00000000 // Isochronous endpoint +#define USB_EP_MODE_BULK 0x00000100 // Bulk endpoint +#define USB_EP_MODE_INT 0x00000200 // Interrupt endpoint +#define USB_EP_MODE_CTRL 0x00000300 // Control endpoint +#define USB_EP_MODE_MASK 0x00000300 // Mode Mask +#define USB_EP_SPEED_LOW 0x00000000 // Low Speed +#define USB_EP_SPEED_FULL 0x00001000 // Full Speed +#define USB_EP_HOST_IN 0x00000000 // Host IN endpoint +#define USB_EP_HOST_OUT 0x00002000 // Host OUT endpoint +#define USB_EP_DEV_IN 0x00002000 // Device IN endpoint +#define USB_EP_DEV_OUT 0x00000000 // Device OUT endpoint + +//***************************************************************************** +// +// The following are values that can be passed to USBHostPwrConfig() as +// the ulFlags parameter. +// +//***************************************************************************** +#define USB_HOST_PWRFLT_LOW 0x00000010 +#define USB_HOST_PWRFLT_HIGH 0x00000030 +#define USB_HOST_PWRFLT_EP_NONE 0x00000000 +#define USB_HOST_PWRFLT_EP_TRI 0x00000140 +#define USB_HOST_PWRFLT_EP_LOW 0x00000240 +#define USB_HOST_PWRFLT_EP_HIGH 0x00000340 +#ifndef DEPRECATED +#define USB_HOST_PWREN_LOW 0x00000002 +#define USB_HOST_PWREN_HIGH 0x00000003 +#define USB_HOST_PWREN_VBLOW 0x00000002 +#define USB_HOST_PWREN_VBHIGH 0x00000003 +#endif +#define USB_HOST_PWREN_MAN_LOW 0x00000000 +#define USB_HOST_PWREN_MAN_HIGH 0x00000001 +#define USB_HOST_PWREN_AUTOLOW 0x00000002 +#define USB_HOST_PWREN_AUTOHIGH 0x00000003 +#define USB_HOST_PWREN_FILTER 0x00010000 + +//***************************************************************************** +// +// The following are special values that can be passed to +// USBHostEndpointConfig() as the ulNAKPollInterval parameter. +// +//***************************************************************************** +#define MAX_NAK_LIMIT 31 // Maximum NAK interval +#define DISABLE_NAK_LIMIT 0 // No NAK timeouts + +//***************************************************************************** +// +// This value specifies the maximum size of transfers on endpoint 0 as 64 +// bytes. This value is fixed in hardware as the FIFO size for endpoint 0. +// +//***************************************************************************** +#define MAX_PACKET_SIZE_EP0 64 + +//***************************************************************************** +// +// These values are used to indicate which endpoint to access. +// +//***************************************************************************** +#define USB_EP_0 0x00000000 // Endpoint 0 +#define USB_EP_1 0x00000010 // Endpoint 1 +#define USB_EP_2 0x00000020 // Endpoint 2 +#define USB_EP_3 0x00000030 // Endpoint 3 +#define USB_EP_4 0x00000040 // Endpoint 4 +#define USB_EP_5 0x00000050 // Endpoint 5 +#define USB_EP_6 0x00000060 // Endpoint 6 +#define USB_EP_7 0x00000070 // Endpoint 7 +#define USB_EP_8 0x00000080 // Endpoint 8 +#define USB_EP_9 0x00000090 // Endpoint 9 +#define USB_EP_10 0x000000A0 // Endpoint 10 +#define USB_EP_11 0x000000B0 // Endpoint 11 +#define USB_EP_12 0x000000C0 // Endpoint 12 +#define USB_EP_13 0x000000D0 // Endpoint 13 +#define USB_EP_14 0x000000E0 // Endpoint 14 +#define USB_EP_15 0x000000F0 // Endpoint 15 +#define NUM_USB_EP 16 // Number of supported endpoints + +//***************************************************************************** +// +// These macros allow conversion between 0-based endpoint indices and the +// USB_EP_x values required when calling various USB APIs. +// +//***************************************************************************** +#define INDEX_TO_USB_EP(x) ((x) << 4) +#define USB_EP_TO_INDEX(x) ((x) >> 4) + +//***************************************************************************** +// +// The following are values that can be passed to USBFIFOConfigSet() as the +// ulFIFOSize parameter. +// +//***************************************************************************** +#define USB_FIFO_SZ_8 0x00000000 // 8 byte FIFO +#define USB_FIFO_SZ_16 0x00000001 // 16 byte FIFO +#define USB_FIFO_SZ_32 0x00000002 // 32 byte FIFO +#define USB_FIFO_SZ_64 0x00000003 // 64 byte FIFO +#define USB_FIFO_SZ_128 0x00000004 // 128 byte FIFO +#define USB_FIFO_SZ_256 0x00000005 // 256 byte FIFO +#define USB_FIFO_SZ_512 0x00000006 // 512 byte FIFO +#define USB_FIFO_SZ_1024 0x00000007 // 1024 byte FIFO +#define USB_FIFO_SZ_2048 0x00000008 // 2048 byte FIFO +#define USB_FIFO_SZ_4096 0x00000009 // 4096 byte FIFO +#define USB_FIFO_SZ_8_DB 0x00000010 // 8 byte double buffered FIFO + // (occupying 16 bytes) +#define USB_FIFO_SZ_16_DB 0x00000011 // 16 byte double buffered FIFO + // (occupying 32 bytes) +#define USB_FIFO_SZ_32_DB 0x00000012 // 32 byte double buffered FIFO + // (occupying 64 bytes) +#define USB_FIFO_SZ_64_DB 0x00000013 // 64 byte double buffered FIFO + // (occupying 128 bytes) +#define USB_FIFO_SZ_128_DB 0x00000014 // 128 byte double buffered FIFO + // (occupying 256 bytes) +#define USB_FIFO_SZ_256_DB 0x00000015 // 256 byte double buffered FIFO + // (occupying 512 bytes) +#define USB_FIFO_SZ_512_DB 0x00000016 // 512 byte double buffered FIFO + // (occupying 1024 bytes) +#define USB_FIFO_SZ_1024_DB 0x00000017 // 1024 byte double buffered FIFO + // (occupying 2048 bytes) +#define USB_FIFO_SZ_2048_DB 0x00000018 // 2048 byte double buffered FIFO + // (occupying 4096 bytes) + +//***************************************************************************** +// +// This macro allow conversion from a FIFO size label as defined above to +// a number of bytes +// +//***************************************************************************** +#define USB_FIFO_SIZE_DB_FLAG 0x00000010 +#define USB_FIFO_SZ_TO_BYTES(x) ((8 << ((x) & ~ USB_FIFO_SIZE_DB_FLAG)) * \ + (((x) & USB_FIFO_SIZE_DB_FLAG) ? 2 : 1)) + +//***************************************************************************** +// +// The following are values that can be passed to USBEndpointDataSend() as the +// ulTransType parameter. +// +//***************************************************************************** +#define USB_TRANS_OUT 0x00000102 // Normal OUT transaction +#define USB_TRANS_IN 0x00000102 // Normal IN transaction +#define USB_TRANS_IN_LAST 0x0000010a // Final IN transaction (for + // endpoint 0 in device mode) +#define USB_TRANS_SETUP 0x0000110a // Setup transaction (for endpoint + // 0) +#define USB_TRANS_STATUS 0x00000142 // Status transaction (for endpoint + // 0) + +//***************************************************************************** +// +// The following are values are returned by the USBModeGet function. +// +//***************************************************************************** +#define USB_DUAL_MODE_HOST 0x00000001 // Dual mode controller is in Host + // mode. +#define USB_DUAL_MODE_DEVICE 0x00000081 // Dual mode controller is in + // Device mode. +#define USB_DUAL_MODE_NONE 0x00000080 // Dual mode controller mode is not + // set. +#define USB_OTG_MODE_ASIDE_HOST 0x0000001d // OTG controller on the A side of + // the cable. +#define USB_OTG_MODE_ASIDE_NPWR 0x00000001 // OTG controller on the A side of + // the cable. +#define USB_OTG_MODE_ASIDE_SESS 0x00000009 // OTG controller on the A side of + // the cable Session Valid. +#define USB_OTG_MODE_ASIDE_AVAL 0x00000011 // OTG controller on the A side of + // the cable A valid. +#define USB_OTG_MODE_ASIDE_DEV 0x00000019 // OTG controller on the A side of + // the cable. +#define USB_OTG_MODE_BSIDE_HOST 0x0000009d // OTG controller on the B side of + // the cable. +#define USB_OTG_MODE_BSIDE_DEV 0x00000099 // OTG controller on the B side of + // the cable. +#define USB_OTG_MODE_BSIDE_NPWR 0x00000081 // OTG controller on the B side of + // the cable. +#define USB_OTG_MODE_NONE 0x00000080 // OTG controller mode is not set. + +//***************************************************************************** +// +// Prototypes for the APIs. +// +//***************************************************************************** +extern unsigned long USBDevAddrGet(unsigned long ulBase); +extern void USBDevAddrSet(unsigned long ulBase, unsigned long ulAddress); +extern void USBDevConnect(unsigned long ulBase); +extern void USBDevDisconnect(unsigned long ulBase); +extern void USBDevEndpointConfigSet(unsigned long ulBase, + unsigned long ulEndpoint, + unsigned long ulMaxPacketSize, + unsigned long ulFlags); +extern void USBDevEndpointConfigGet(unsigned long ulBase, + unsigned long ulEndpoint, + unsigned long *pulMaxPacketSize, + unsigned long *pulFlags); +extern void USBDevEndpointDataAck(unsigned long ulBase, + unsigned long ulEndpoint, + tBoolean bIsLastPacket); +extern void USBDevEndpointStall(unsigned long ulBase, unsigned long ulEndpoint, + unsigned long ulFlags); +extern void USBDevEndpointStallClear(unsigned long ulBase, + unsigned long ulEndpoint, + unsigned long ulFlags); +extern void USBDevEndpointStatusClear(unsigned long ulBase, + unsigned long ulEndpoint, + unsigned long ulFlags); +extern unsigned long USBEndpointDataAvail(unsigned long ulBase, + unsigned long ulEndpoint); +extern void USBEndpointDMAEnable(unsigned long ulBase, unsigned long ulEndpoint, + unsigned long ulFlags); +extern void USBEndpointDMADisable(unsigned long ulBase, + unsigned long ulEndpoint, + unsigned long ulFlags); +extern long USBEndpointDataGet(unsigned long ulBase, unsigned long ulEndpoint, + unsigned char *pucData, unsigned long *pulSize); +extern long USBEndpointDataPut(unsigned long ulBase, unsigned long ulEndpoint, + unsigned char *pucData, unsigned long ulSize); +extern long USBEndpointDataSend(unsigned long ulBase, unsigned long ulEndpoint, + unsigned long ulTransType); +extern void USBEndpointDataToggleClear(unsigned long ulBase, + unsigned long ulEndpoint, + unsigned long ulFlags); +extern unsigned long USBEndpointStatus(unsigned long ulBase, + unsigned long ulEndpoint); +extern unsigned long USBFIFOAddrGet(unsigned long ulBase, + unsigned long ulEndpoint); +extern void USBFIFOConfigGet(unsigned long ulBase, unsigned long ulEndpoint, + unsigned long *pulFIFOAddress, + unsigned long *pulFIFOSize, + unsigned long ulFlags); +extern void USBFIFOConfigSet(unsigned long ulBase, unsigned long ulEndpoint, + unsigned long ulFIFOAddress, + unsigned long ulFIFOSize, unsigned long ulFlags); +extern void USBFIFOFlush(unsigned long ulBase, unsigned long ulEndpoint, + unsigned long ulFlags); +extern unsigned long USBFrameNumberGet(unsigned long ulBase); +extern unsigned long USBHostAddrGet(unsigned long ulBase, + unsigned long ulEndpoint, + unsigned long ulFlags); +extern void USBHostAddrSet(unsigned long ulBase, unsigned long ulEndpoint, + unsigned long ulAddr, unsigned long ulFlags); +extern void USBHostEndpointConfig(unsigned long ulBase, + unsigned long ulEndpoint, + unsigned long ulMaxPacketSize, + unsigned long ulNAKPollInterval, + unsigned long ulTargetEndpoint, + unsigned long ulFlags); +extern void USBHostEndpointDataAck(unsigned long ulBase, + unsigned long ulEndpoint); +extern void USBHostEndpointDataToggle(unsigned long ulBase, + unsigned long ulEndpoint, + tBoolean bDataToggle, + unsigned long ulFlags); +extern void USBHostEndpointStatusClear(unsigned long ulBase, + unsigned long ulEndpoint, + unsigned long ulFlags); +extern unsigned long USBHostHubAddrGet(unsigned long ulBase, + unsigned long ulEndpoint, + unsigned long ulFlags); +extern void USBHostHubAddrSet(unsigned long ulBase, unsigned long ulEndpoint, + unsigned long ulAddr, unsigned long ulFlags); +extern void USBHostPwrDisable(unsigned long ulBase); +extern void USBHostPwrEnable(unsigned long ulBase); +extern void USBHostPwrConfig(unsigned long ulBase, unsigned long ulFlags); +#ifndef DEPRECATED +#define USBHostPwrFaultConfig USBHostPwrConfig +#endif +extern void USBHostPwrFaultDisable(unsigned long ulBase); +extern void USBHostPwrFaultEnable(unsigned long ulBase); +extern void USBHostRequestIN(unsigned long ulBase, unsigned long ulEndpoint); +extern void USBHostRequestStatus(unsigned long ulBase); +extern void USBHostReset(unsigned long ulBase, tBoolean bStart); +extern void USBHostResume(unsigned long ulBase, tBoolean bStart); +extern unsigned long USBHostSpeedGet(unsigned long ulBase); +extern void USBHostSuspend(unsigned long ulBase); +extern void USBIntDisableControl(unsigned long ulBase, + unsigned long ulIntFlags); +extern void USBIntEnableControl(unsigned long ulBase, + unsigned long ulIntFlags); +extern unsigned long USBIntStatusControl(unsigned long ulBase); +extern void USBIntDisableEndpoint(unsigned long ulBase, + unsigned long ulIntFlags); +extern void USBIntEnableEndpoint(unsigned long ulBase, + unsigned long ulIntFlags); +extern unsigned long USBIntStatusEndpoint(unsigned long ulBase); +extern void USBIntRegister(unsigned long ulBase, void(*pfnHandler)(void)); +extern void USBIntUnregister(unsigned long ulBase); +extern void USBOTGSessionRequest(unsigned long ulBase, tBoolean bStart); +extern unsigned long USBModeGet(unsigned long ulBase); +extern void USBEndpointDMAChannel(unsigned long ulBase, + unsigned long ulEndpoint, + unsigned long ulChannel); +extern void USBHostMode(unsigned long ulBase); +extern void USBHostMode(unsigned long ulBase); +extern void USBDevMode(unsigned long ulBase); + +//***************************************************************************** +// +// Several USB APIs have been renamed, with the original function name being +// deprecated. These defines and function protypes provide backward +// compatibility. +// +//***************************************************************************** +#ifndef DEPRECATED +//***************************************************************************** +// +// The following are values that can be passed to USBIntEnable() and +// USBIntDisable() as the ulIntFlags parameter, and are returned from +// USBIntStatus(). +// +//***************************************************************************** +#define USB_INT_ALL 0xFF030E0F // All Interrupt sources +#define USB_INT_STATUS 0xFF000000 // Status Interrupts +#define USB_INT_VBUS_ERR 0x80000000 // VBUS Error +#define USB_INT_SESSION_START 0x40000000 // Session Start Detected +#define USB_INT_SESSION_END 0x20000000 // Session End Detected +#define USB_INT_DISCONNECT 0x20000000 // Disconnect Detected +#define USB_INT_CONNECT 0x10000000 // Device Connect Detected +#define USB_INT_SOF 0x08000000 // Start of Frame Detected +#define USB_INT_BABBLE 0x04000000 // Babble signaled +#define USB_INT_RESET 0x04000000 // Reset signaled +#define USB_INT_RESUME 0x02000000 // Resume detected +#define USB_INT_SUSPEND 0x01000000 // Suspend detected +#define USB_INT_MODE_DETECT 0x00020000 // Mode value valid +#define USB_INT_POWER_FAULT 0x00010000 // Power Fault detected +#define USB_INT_HOST_IN 0x00000E00 // Host IN Interrupts +#define USB_INT_DEV_OUT 0x00000E00 // Device OUT Interrupts +#define USB_INT_HOST_IN_EP3 0x00000800 // Endpoint 3 Host IN Interrupt +#define USB_INT_HOST_IN_EP2 0x00000400 // Endpoint 2 Host IN Interrupt +#define USB_INT_HOST_IN_EP1 0x00000200 // Endpoint 1 Host IN Interrupt +#define USB_INT_DEV_OUT_EP3 0x00000800 // Endpoint 3 Device OUT Interrupt +#define USB_INT_DEV_OUT_EP2 0x00000400 // Endpoint 2 Device OUT Interrupt +#define USB_INT_DEV_OUT_EP1 0x00000200 // Endpoint 1 Device OUT Interrupt +#define USB_INT_HOST_OUT 0x0000000E // Host OUT Interrupts +#define USB_INT_DEV_IN 0x0000000E // Device IN Interrupts +#define USB_INT_HOST_OUT_EP3 0x00000008 // Endpoint 3 HOST_OUT Interrupt +#define USB_INT_HOST_OUT_EP2 0x00000004 // Endpoint 2 HOST_OUT Interrupt +#define USB_INT_HOST_OUT_EP1 0x00000002 // Endpoint 1 HOST_OUT Interrupt +#define USB_INT_DEV_IN_EP3 0x00000008 // Endpoint 3 DEV_IN Interrupt +#define USB_INT_DEV_IN_EP2 0x00000004 // Endpoint 2 DEV_IN Interrupt +#define USB_INT_DEV_IN_EP1 0x00000002 // Endpoint 1 DEV_IN Interrupt +#define USB_INT_EP0 0x00000001 // Endpoint 0 Interrupt + +#define USBDevEndpointConfig USBDevEndpointConfigSet +extern void USBIntDisable(unsigned long ulBase, unsigned long ulIntFlags); +extern void USBIntEnable(unsigned long ulBase, unsigned long ulIntFlags); +extern unsigned long USBIntStatus(unsigned long ulBase); +#endif + +//***************************************************************************** +// +// Mark the end of the C bindings section for C++ compilers. +// +//***************************************************************************** +#ifdef __cplusplus +} +#endif + +#endif // __USB_H__ diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/watchdog.c b/bsp/lm3s_9b9x/Libraries/driverlib/watchdog.c new file mode 100644 index 0000000000000000000000000000000000000000..6e33ea52fd61712da9e108e3d77de7bdbde223af --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/watchdog.c @@ -0,0 +1,564 @@ +//***************************************************************************** +// +// watchdog.c - Driver for the Watchdog Timer Module. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +//***************************************************************************** +// +//! \addtogroup watchdog_api +//! @{ +// +//***************************************************************************** + +#include "inc/hw_ints.h" +#include "inc/hw_memmap.h" +#include "inc/hw_types.h" +#include "inc/hw_watchdog.h" +#include "driverlib/debug.h" +#include "driverlib/interrupt.h" +#include "driverlib/watchdog.h" + +//***************************************************************************** +// +//! Determines if the watchdog timer is enabled. +//! +//! \param ulBase is the base address of the watchdog timer module. +//! +//! This will check to see if the watchdog timer is enabled. +//! +//! \return Returns \b true if the watchdog timer is enabled, and \b false +//! if it is not. +// +//***************************************************************************** +tBoolean +WatchdogRunning(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE)); + + // + // See if the watchdog timer module is enabled, and return. + // + return(HWREG(ulBase + WDT_O_CTL) & WDT_CTL_INTEN); +} + +//***************************************************************************** +// +//! Enables the watchdog timer. +//! +//! \param ulBase is the base address of the watchdog timer module. +//! +//! This will enable the watchdog timer counter and interrupt. +//! +//! \note This function will have no effect if the watchdog timer has +//! been locked. +//! +//! \sa WatchdogLock(), WatchdogUnlock() +//! +//! \return None. +// +//***************************************************************************** +void +WatchdogEnable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE)); + + // + // Enable the watchdog timer module. + // + HWREG(ulBase + WDT_O_CTL) |= WDT_CTL_INTEN; +} + +//***************************************************************************** +// +//! Enables the watchdog timer reset. +//! +//! \param ulBase is the base address of the watchdog timer module. +//! +//! Enables the capability of the watchdog timer to issue a reset to the +//! processor upon a second timeout condition. +//! +//! \note This function will have no effect if the watchdog timer has +//! been locked. +//! +//! \sa WatchdogLock(), WatchdogUnlock() +//! +//! \return None. +// +//***************************************************************************** +void +WatchdogResetEnable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE)); + + // + // Enable the watchdog reset. + // + HWREG(ulBase + WDT_O_CTL) |= WDT_CTL_RESEN; +} + +//***************************************************************************** +// +//! Disables the watchdog timer reset. +//! +//! \param ulBase is the base address of the watchdog timer module. +//! +//! Disables the capability of the watchdog timer to issue a reset to the +//! processor upon a second timeout condition. +//! +//! \note This function will have no effect if the watchdog timer has +//! been locked. +//! +//! \sa WatchdogLock(), WatchdogUnlock() +//! +//! \return None. +// +//***************************************************************************** +void +WatchdogResetDisable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE)); + + // + // Disable the watchdog reset. + // + HWREG(ulBase + WDT_O_CTL) &= ~(WDT_CTL_RESEN); +} + +//***************************************************************************** +// +//! Enables the watchdog timer lock mechanism. +//! +//! \param ulBase is the base address of the watchdog timer module. +//! +//! Locks out write access to the watchdog timer configuration registers. +//! +//! \return None. +// +//***************************************************************************** +void +WatchdogLock(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE)); + + // + // Lock out watchdog register writes. Writing anything to the WDT_O_LOCK + // register causes the lock to go into effect. + // + HWREG(ulBase + WDT_O_LOCK) = WDT_LOCK_LOCKED; +} + +//***************************************************************************** +// +//! Disables the watchdog timer lock mechanism. +//! +//! \param ulBase is the base address of the watchdog timer module. +//! +//! Enables write access to the watchdog timer configuration registers. +//! +//! \return None. +// +//***************************************************************************** +void +WatchdogUnlock(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE)); + + // + // Unlock watchdog register writes. + // + HWREG(ulBase + WDT_O_LOCK) = WDT_LOCK_UNLOCK; +} + +//***************************************************************************** +// +//! Gets the state of the watchdog timer lock mechanism. +//! +//! \param ulBase is the base address of the watchdog timer module. +//! +//! Returns the lock state of the watchdog timer registers. +//! +//! \return Returns \b true if the watchdog timer registers are locked, and +//! \b false if they are not locked. +// +//***************************************************************************** +tBoolean +WatchdogLockState(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE)); + + // + // Get the lock state. + // + return((HWREG(ulBase + WDT_O_LOCK) == WDT_LOCK_LOCKED) ? true : false); +} + +//***************************************************************************** +// +//! Sets the watchdog timer reload value. +//! +//! \param ulBase is the base address of the watchdog timer module. +//! \param ulLoadVal is the load value for the watchdog timer. +//! +//! This function sets the value to load into the watchdog timer when the count +//! reaches zero for the first time; if the watchdog timer is running when this +//! function is called, then the value will be immediately loaded into the +//! watchdog timer counter. If the \e ulLoadVal parameter is 0, then an +//! interrupt is immediately generated. +//! +//! \note This function will have no effect if the watchdog timer has +//! been locked. +//! +//! \sa WatchdogLock(), WatchdogUnlock(), WatchdogReloadGet() +//! +//! \return None. +// +//***************************************************************************** +void +WatchdogReloadSet(unsigned long ulBase, unsigned long ulLoadVal) +{ + // + // Check the arguments. + // + ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE)); + + // + // Set the load register. + // + HWREG(ulBase + WDT_O_LOAD) = ulLoadVal; +} + +//***************************************************************************** +// +//! Gets the watchdog timer reload value. +//! +//! \param ulBase is the base address of the watchdog timer module. +//! +//! This function gets the value that is loaded into the watchdog timer when +//! the count reaches zero for the first time. +//! +//! \sa WatchdogReloadSet() +//! +//! \return None. +// +//***************************************************************************** +unsigned long +WatchdogReloadGet(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE)); + + // + // Get the load register. + // + return(HWREG(ulBase + WDT_O_LOAD)); +} + +//***************************************************************************** +// +//! Gets the current watchdog timer value. +//! +//! \param ulBase is the base address of the watchdog timer module. +//! +//! This function reads the current value of the watchdog timer. +//! +//! \return Returns the current value of the watchdog timer. +// +//***************************************************************************** +unsigned long +WatchdogValueGet(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE)); + + // + // Get the current watchdog timer register value. + // + return(HWREG(ulBase + WDT_O_VALUE)); +} + +//***************************************************************************** +// +//! Registers an interrupt handler for watchdog timer interrupt. +//! +//! \param ulBase is the base address of the watchdog timer module. +//! \param pfnHandler is a pointer to the function to be called when the +//! watchdog timer interrupt occurs. +//! +//! This function does the actual registering of the interrupt handler. This +//! will enable the global interrupt in the interrupt controller; the watchdog +//! timer interrupt must be enabled via WatchdogEnable(). It is the interrupt +//! handler's responsibility to clear the interrupt source via +//! WatchdogIntClear(). +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +WatchdogIntRegister(unsigned long ulBase, void (*pfnHandler)(void)) +{ + // + // Check the arguments. + // + ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE)); + + // + // Register the interrupt handler. + // + IntRegister(INT_WATCHDOG, pfnHandler); + + // + // Enable the watchdog timer interrupt. + // + IntEnable(INT_WATCHDOG); +} + +//***************************************************************************** +// +//! Unregisters an interrupt handler for the watchdog timer interrupt. +//! +//! \param ulBase is the base address of the watchdog timer module. +//! +//! This function does the actual unregistering of the interrupt handler. This +//! function will clear the handler to be called when a watchdog timer +//! interrupt occurs. This will also mask off the interrupt in the interrupt +//! controller so that the interrupt handler no longer is called. +//! +//! \sa IntRegister() for important information about registering interrupt +//! handlers. +//! +//! \return None. +// +//***************************************************************************** +void +WatchdogIntUnregister(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE)); + + // + // Disable the interrupt. + // + IntDisable(INT_WATCHDOG); + + // + // Unregister the interrupt handler. + // + IntUnregister(INT_WATCHDOG); +} + +//***************************************************************************** +// +//! Enables the watchdog timer interrupt. +//! +//! \param ulBase is the base address of the watchdog timer module. +//! +//! Enables the watchdog timer interrupt. +//! +//! \note This function will have no effect if the watchdog timer has +//! been locked. +//! +//! \sa WatchdogLock(), WatchdogUnlock(), WatchdogEnable() +//! +//! \return None. +// +//***************************************************************************** +void +WatchdogIntEnable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE)); + + // + // Enable the watchdog interrupt. + // + HWREG(ulBase + WDT_O_CTL) |= WDT_CTL_INTEN; +} + +//***************************************************************************** +// +//! Gets the current watchdog timer interrupt status. +//! +//! \param ulBase is the base address of the watchdog timer module. +//! \param bMasked is \b false if the raw interrupt status is required and +//! \b true if the masked interrupt status is required. +//! +//! This returns the interrupt status for the watchdog timer module. Either +//! the raw interrupt status or the status of interrupt that is allowed to +//! reflect to the processor can be returned. +//! +//! \return Returns the current interrupt status, where a 1 indicates that the +//! watchdog interrupt is active, and a 0 indicates that it is not active. +// +//***************************************************************************** +unsigned long +WatchdogIntStatus(unsigned long ulBase, tBoolean bMasked) +{ + // + // Check the arguments. + // + ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE)); + + // + // Return either the interrupt status or the raw interrupt status as + // requested. + // + if(bMasked) + { + return(HWREG(ulBase + WDT_O_MIS)); + } + else + { + return(HWREG(ulBase + WDT_O_RIS)); + } +} + +//***************************************************************************** +// +//! Clears the watchdog timer interrupt. +//! +//! \param ulBase is the base address of the watchdog timer module. +//! +//! The watchdog timer interrupt source is cleared, so that it no longer +//! asserts. +//! +//! \note Since there is a write buffer in the Cortex-M3 processor, it may take +//! several clock cycles before the interrupt source is actually cleared. +//! Therefore, it is recommended that the interrupt source be cleared early in +//! the interrupt handler (as opposed to the very last action) to avoid +//! returning from the interrupt handler before the interrupt source is +//! actually cleared. Failure to do so may result in the interrupt handler +//! being immediately reentered (since NVIC still sees the interrupt source +//! asserted). +//! +//! \return None. +// +//***************************************************************************** +void +WatchdogIntClear(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE)); + + // + // Clear the interrupt source. + // + HWREG(ulBase + WDT_O_ICR) = WDT_INT_TIMEOUT; +} + +//***************************************************************************** +// +//! Enables stalling of the watchdog timer during debug events. +//! +//! \param ulBase is the base address of the watchdog timer module. +//! +//! This function allows the watchdog timer to stop counting when the processor +//! is stopped by the debugger. By doing so, the watchdog is prevented from +//! expiring (typically almost immediately from a human time perspective) and +//! resetting the system (if reset is enabled). The watchdog will instead +//! expired after the appropriate number of processor cycles have been executed +//! while debugging (or at the appropriate time after the processor has been +//! restarted). +//! +//! \return None. +// +//***************************************************************************** +void +WatchdogStallEnable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE)); + + // + // Enable timer stalling. + // + HWREG(ulBase + WDT_O_TEST) |= WDT_TEST_STALL; +} + +//***************************************************************************** +// +//! Disables stalling of the watchdog timer during debug events. +//! +//! \param ulBase is the base address of the watchdog timer module. +//! +//! This function disables the debug mode stall of the watchdog timer. By +//! doing so, the watchdog timer continues to count regardless of the processor +//! debug state. +//! +//! \return None. +// +//***************************************************************************** +void +WatchdogStallDisable(unsigned long ulBase) +{ + // + // Check the arguments. + // + ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE)); + + // + // Disable timer stalling. + // + HWREG(ulBase + WDT_O_TEST) &= ~(WDT_TEST_STALL); +} + +//***************************************************************************** +// +// Close the Doxygen group. +//! @} +// +//***************************************************************************** diff --git a/bsp/lm3s_9b9x/Libraries/driverlib/watchdog.h b/bsp/lm3s_9b9x/Libraries/driverlib/watchdog.h new file mode 100644 index 0000000000000000000000000000000000000000..d1c6e5cf122c6f1322332b21ea76b4d0b82d70ee --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/driverlib/watchdog.h @@ -0,0 +1,71 @@ +//***************************************************************************** +// +// watchdog.h - Prototypes for the Watchdog Timer API +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Peripheral Driver Library. +// +//***************************************************************************** + +#ifndef __WATCHDOG_H__ +#define __WATCHDOG_H__ + +//***************************************************************************** +// +// If building with a C++ compiler, make all of the definitions in this header +// have a C binding. +// +//***************************************************************************** +#ifdef __cplusplus +extern "C" +{ +#endif + +//***************************************************************************** +// +// Prototypes for the APIs. +// +//***************************************************************************** +extern tBoolean WatchdogRunning(unsigned long ulBase); +extern void WatchdogEnable(unsigned long ulBase); +extern void WatchdogResetEnable(unsigned long ulBase); +extern void WatchdogResetDisable(unsigned long ulBase); +extern void WatchdogLock(unsigned long ulBase); +extern void WatchdogUnlock(unsigned long ulBase); +extern tBoolean WatchdogLockState(unsigned long ulBase); +extern void WatchdogReloadSet(unsigned long ulBase, unsigned long ulLoadVal); +extern unsigned long WatchdogReloadGet(unsigned long ulBase); +extern unsigned long WatchdogValueGet(unsigned long ulBase); +extern void WatchdogIntRegister(unsigned long ulBase, void(*pfnHandler)(void)); +extern void WatchdogIntUnregister(unsigned long ulBase); +extern void WatchdogIntEnable(unsigned long ulBase); +extern unsigned long WatchdogIntStatus(unsigned long ulBase, tBoolean bMasked); +extern void WatchdogIntClear(unsigned long ulBase); +extern void WatchdogStallEnable(unsigned long ulBase); +extern void WatchdogStallDisable(unsigned long ulBase); + +//***************************************************************************** +// +// Mark the end of the C bindings section for C++ compilers. +// +//***************************************************************************** +#ifdef __cplusplus +} +#endif + +#endif // __WATCHDOG_H__ diff --git a/bsp/lm3s_9b9x/Libraries/inc/asmdefs.h b/bsp/lm3s_9b9x/Libraries/inc/asmdefs.h new file mode 100644 index 0000000000000000000000000000000000000000..811f8210784a5e8c418bc6e9946320bd89405623 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/inc/asmdefs.h @@ -0,0 +1,212 @@ +//***************************************************************************** +// +// asmdefs.h - Macros to allow assembly code be portable among toolchains. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Firmware Development Package. +// +//***************************************************************************** + +#ifndef __ASMDEFS_H__ +#define __ASMDEFS_H__ + +//***************************************************************************** +// +// The defines required for code_red. +// +//***************************************************************************** +#ifdef codered + +// +// The assembly code preamble required to put the assembler into the correct +// configuration. +// + .syntax unified + .thumb + +// +// Section headers. +// +#define __LIBRARY__ @ +#define __TEXT__ .text +#define __DATA__ .data +#define __BSS__ .bss +#define __TEXT_NOROOT__ .text + +// +// Assembler nmenonics. +// +#define __ALIGN__ .balign 4 +#define __END__ .end +#define __EXPORT__ .globl +#define __IMPORT__ .extern +#define __LABEL__ : +#define __STR__ .ascii +#define __THUMB_LABEL__ .thumb_func +#define __WORD__ .word +#define __INLINE_DATA__ + +#endif // codered + +//***************************************************************************** +// +// The defines required for EW-ARM. +// +//***************************************************************************** +#ifdef ewarm + +// +// Section headers. +// +#define __LIBRARY__ module +#define __TEXT__ rseg CODE:CODE(2) +#define __DATA__ rseg DATA:DATA(2) +#define __BSS__ rseg DATA:DATA(2) +#define __TEXT_NOROOT__ rseg CODE:CODE:NOROOT(2) + +// +// Assembler nmenonics. +// +#define __ALIGN__ alignrom 2 +#define __END__ end +#define __EXPORT__ export +#define __IMPORT__ import +#define __LABEL__ +#define __STR__ dcb +#define __THUMB_LABEL__ thumb +#define __WORD__ dcd +#define __INLINE_DATA__ data + +#endif // ewarm + +//***************************************************************************** +// +// The defines required for GCC. +// +//***************************************************************************** +#if defined(gcc) + +// +// The assembly code preamble required to put the assembler into the correct +// configuration. +// + .syntax unified + .thumb + +// +// Section headers. +// +#define __LIBRARY__ @ +#define __TEXT__ .text +#define __DATA__ .data +#define __BSS__ .bss +#define __TEXT_NOROOT__ .text + +// +// Assembler nmenonics. +// +#define __ALIGN__ .balign 4 +#define __END__ .end +#define __EXPORT__ .globl +#define __IMPORT__ .extern +#define __LABEL__ : +#define __STR__ .ascii +#define __THUMB_LABEL__ .thumb_func +#define __WORD__ .word +#define __INLINE_DATA__ + +#endif // gcc + +//***************************************************************************** +// +// The defines required for RV-MDK. +// +//***************************************************************************** +#ifdef rvmdk + +// +// The assembly code preamble required to put the assembler into the correct +// configuration. +// + thumb + require8 + preserve8 + +// +// Section headers. +// +#define __LIBRARY__ ; +#define __TEXT__ area ||.text||, code, readonly, align=2 +#define __DATA__ area ||.data||, data, align=2 +#define __BSS__ area ||.bss||, noinit, align=2 +#define __TEXT_NOROOT__ area ||.text||, code, readonly, align=2 + +// +// Assembler nmenonics. +// +#define __ALIGN__ align 4 +#define __END__ end +#define __EXPORT__ export +#define __IMPORT__ import +#define __LABEL__ +#define __STR__ dcb +#define __THUMB_LABEL__ +#define __WORD__ dcd +#define __INLINE_DATA__ + +#endif // rvmdk + +//***************************************************************************** +// +// The defines required for Sourcery G++. +// +//***************************************************************************** +#if defined(sourcerygxx) + +// +// The assembly code preamble required to put the assembler into the correct +// configuration. +// + .syntax unified + .thumb + +// +// Section headers. +// +#define __LIBRARY__ @ +#define __TEXT__ .text +#define __DATA__ .data +#define __BSS__ .bss +#define __TEXT_NOROOT__ .text + +// +// Assembler nmenonics. +// +#define __ALIGN__ .balign 4 +#define __END__ .end +#define __EXPORT__ .globl +#define __IMPORT__ .extern +#define __LABEL__ : +#define __STR__ .ascii +#define __THUMB_LABEL__ .thumb_func +#define __WORD__ .word +#define __INLINE_DATA__ + +#endif // sourcerygxx + +#endif // __ASMDEF_H__ diff --git a/bsp/lm3s_9b9x/Libraries/inc/cr_project.xml b/bsp/lm3s_9b9x/Libraries/inc/cr_project.xml new file mode 100644 index 0000000000000000000000000000000000000000..dec7adeb030cc8ad679aa3ad7de8864dc30662c9 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/inc/cr_project.xml @@ -0,0 +1,26 @@ + + + + + + diff --git a/bsp/lm3s_9b9x/Libraries/inc/hw_adc.h b/bsp/lm3s_9b9x/Libraries/inc/hw_adc.h new file mode 100644 index 0000000000000000000000000000000000000000..8981d6a8d24315346007381a03021340ded27772 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/inc/hw_adc.h @@ -0,0 +1,1193 @@ +//***************************************************************************** +// +// hw_adc.h - Macros used when accessing the ADC hardware. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_ADC_H__ +#define __HW_ADC_H__ + +//***************************************************************************** +// +// The following are defines for the ADC register offsets. +// +//***************************************************************************** +#define ADC_O_ACTSS 0x00000000 // ADC Active Sample Sequencer +#define ADC_O_RIS 0x00000004 // ADC Raw Interrupt Status +#define ADC_O_IM 0x00000008 // ADC Interrupt Mask +#define ADC_O_ISC 0x0000000C // ADC Interrupt Status and Clear +#define ADC_O_OSTAT 0x00000010 // ADC Overflow Status +#define ADC_O_EMUX 0x00000014 // ADC Event Multiplexer Select +#define ADC_O_USTAT 0x00000018 // ADC Underflow Status +#define ADC_O_SSPRI 0x00000020 // ADC Sample Sequencer Priority +#define ADC_O_SPC 0x00000024 // ADC Sample Phase Control +#define ADC_O_PSSI 0x00000028 // ADC Processor Sample Sequence + // Initiate +#define ADC_O_SAC 0x00000030 // ADC Sample Averaging Control +#define ADC_O_DCISC 0x00000034 // ADC Digital Comparator Interrupt + // Status and Clear +#define ADC_O_CTL 0x00000038 // ADC Control +#define ADC_O_SSMUX0 0x00000040 // ADC Sample Sequence Input + // Multiplexer Select 0 +#define ADC_O_SSCTL0 0x00000044 // ADC Sample Sequence Control 0 +#define ADC_O_SSFIFO0 0x00000048 // ADC Sample Sequence Result FIFO + // 0 +#define ADC_O_SSFSTAT0 0x0000004C // ADC Sample Sequence FIFO 0 + // Status +#define ADC_O_SSOP0 0x00000050 // ADC Sample Sequence 0 Operation +#define ADC_O_SSDC0 0x00000054 // ADC Sample Sequence 0 Digital + // Comparator Select +#define ADC_O_SSMUX1 0x00000060 // ADC Sample Sequence Input + // Multiplexer Select 1 +#define ADC_O_SSCTL1 0x00000064 // ADC Sample Sequence Control 1 +#define ADC_O_SSFIFO1 0x00000068 // ADC Sample Sequence Result FIFO + // 1 +#define ADC_O_SSFSTAT1 0x0000006C // ADC Sample Sequence FIFO 1 + // Status +#define ADC_O_SSOP1 0x00000070 // ADC Sample Sequence 1 Operation +#define ADC_O_SSDC1 0x00000074 // ADC Sample Sequence 1 Digital + // Comparator Select +#define ADC_O_SSMUX2 0x00000080 // ADC Sample Sequence Input + // Multiplexer Select 2 +#define ADC_O_SSCTL2 0x00000084 // ADC Sample Sequence Control 2 +#define ADC_O_SSFIFO2 0x00000088 // ADC Sample Sequence Result FIFO + // 2 +#define ADC_O_SSFSTAT2 0x0000008C // ADC Sample Sequence FIFO 2 + // Status +#define ADC_O_SSOP2 0x00000090 // ADC Sample Sequence 2 Operation +#define ADC_O_SSDC2 0x00000094 // ADC Sample Sequence 2 Digital + // Comparator Select +#define ADC_O_SSMUX3 0x000000A0 // ADC Sample Sequence Input + // Multiplexer Select 3 +#define ADC_O_SSCTL3 0x000000A4 // ADC Sample Sequence Control 3 +#define ADC_O_SSFIFO3 0x000000A8 // ADC Sample Sequence Result FIFO + // 3 +#define ADC_O_SSFSTAT3 0x000000AC // ADC Sample Sequence FIFO 3 + // Status +#define ADC_O_SSOP3 0x000000B0 // ADC Sample Sequence 3 Operation +#define ADC_O_SSDC3 0x000000B4 // ADC Sample Sequence 3 Digital + // Comparator Select +#define ADC_O_TMLB 0x00000100 // ADC Test Mode Loopback +#define ADC_O_DCRIC 0x00000D00 // ADC Digital Comparator Reset + // Initial Conditions +#define ADC_O_DCCTL0 0x00000E00 // ADC Digital Comparator Control 0 +#define ADC_O_DCCTL1 0x00000E04 // ADC Digital Comparator Control 1 +#define ADC_O_DCCTL2 0x00000E08 // ADC Digital Comparator Control 2 +#define ADC_O_DCCTL3 0x00000E0C // ADC Digital Comparator Control 3 +#define ADC_O_DCCTL4 0x00000E10 // ADC Digital Comparator Control 4 +#define ADC_O_DCCTL5 0x00000E14 // ADC Digital Comparator Control 5 +#define ADC_O_DCCTL6 0x00000E18 // ADC Digital Comparator Control 6 +#define ADC_O_DCCTL7 0x00000E1C // ADC Digital Comparator Control 7 +#define ADC_O_DCCMP0 0x00000E40 // ADC Digital Comparator Range 0 +#define ADC_O_DCCMP1 0x00000E44 // ADC Digital Comparator Range 1 +#define ADC_O_DCCMP2 0x00000E48 // ADC Digital Comparator Range 2 +#define ADC_O_DCCMP3 0x00000E4C // ADC Digital Comparator Range 3 +#define ADC_O_DCCMP4 0x00000E50 // ADC Digital Comparator Range 4 +#define ADC_O_DCCMP5 0x00000E54 // ADC Digital Comparator Range 5 +#define ADC_O_DCCMP6 0x00000E58 // ADC Digital Comparator Range 6 +#define ADC_O_DCCMP7 0x00000E5C // ADC Digital Comparator Range 7 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_ACTSS register. +// +//***************************************************************************** +#define ADC_ACTSS_ASEN3 0x00000008 // ADC SS3 Enable +#define ADC_ACTSS_ASEN2 0x00000004 // ADC SS2 Enable +#define ADC_ACTSS_ASEN1 0x00000002 // ADC SS1 Enable +#define ADC_ACTSS_ASEN0 0x00000001 // ADC SS0 Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_RIS register. +// +//***************************************************************************** +#define ADC_RIS_INRDC 0x00010000 // Digital Comparator Raw Interrupt + // Status +#define ADC_RIS_INR3 0x00000008 // SS3 Raw Interrupt Status +#define ADC_RIS_INR2 0x00000004 // SS2 Raw Interrupt Status +#define ADC_RIS_INR1 0x00000002 // SS1 Raw Interrupt Status +#define ADC_RIS_INR0 0x00000001 // SS0 Raw Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_IM register. +// +//***************************************************************************** +#define ADC_IM_DCONSS3 0x00080000 // Digital Comparator Interrupt on + // SS3 +#define ADC_IM_DCONSS2 0x00040000 // Digital Comparator Interrupt on + // SS2 +#define ADC_IM_DCONSS1 0x00020000 // Digital Comparator Interrupt on + // SS1 +#define ADC_IM_DCONSS0 0x00010000 // Digital Comparator Interrupt on + // SS0 +#define ADC_IM_MASK3 0x00000008 // SS3 Interrupt Mask +#define ADC_IM_MASK2 0x00000004 // SS2 Interrupt Mask +#define ADC_IM_MASK1 0x00000002 // SS1 Interrupt Mask +#define ADC_IM_MASK0 0x00000001 // SS0 Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_ISC register. +// +//***************************************************************************** +#define ADC_ISC_DCINSS3 0x00080000 // Digital Comparator Interrupt + // Status on SS3 +#define ADC_ISC_DCINSS2 0x00040000 // Digital Comparator Interrupt + // Status on SS2 +#define ADC_ISC_DCINSS1 0x00020000 // Digital Comparator Interrupt + // Status on SS1 +#define ADC_ISC_DCINSS0 0x00010000 // Digital Comparator Interrupt + // Status on SS0 +#define ADC_ISC_IN3 0x00000008 // SS3 Interrupt Status and Clear +#define ADC_ISC_IN2 0x00000004 // SS2 Interrupt Status and Clear +#define ADC_ISC_IN1 0x00000002 // SS1 Interrupt Status and Clear +#define ADC_ISC_IN0 0x00000001 // SS0 Interrupt Status and Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_OSTAT register. +// +//***************************************************************************** +#define ADC_OSTAT_OV3 0x00000008 // SS3 FIFO Overflow +#define ADC_OSTAT_OV2 0x00000004 // SS2 FIFO Overflow +#define ADC_OSTAT_OV1 0x00000002 // SS1 FIFO Overflow +#define ADC_OSTAT_OV0 0x00000001 // SS0 FIFO Overflow + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_EMUX register. +// +//***************************************************************************** +#define ADC_EMUX_EM3_M 0x0000F000 // SS3 Trigger Select +#define ADC_EMUX_EM3_PROCESSOR 0x00000000 // Processor (default) +#define ADC_EMUX_EM3_COMP0 0x00001000 // Analog Comparator 0 +#define ADC_EMUX_EM3_COMP1 0x00002000 // Analog Comparator 1 +#define ADC_EMUX_EM3_COMP2 0x00003000 // Analog Comparator 2 +#define ADC_EMUX_EM3_EXTERNAL 0x00004000 // External (GPIO PB4) +#define ADC_EMUX_EM3_TIMER 0x00005000 // Timer +#define ADC_EMUX_EM3_PWM0 0x00006000 // PWM0 +#define ADC_EMUX_EM3_PWM1 0x00007000 // PWM1 +#define ADC_EMUX_EM3_PWM2 0x00008000 // PWM2 +#define ADC_EMUX_EM3_PWM3 0x00009000 // PWM3 +#define ADC_EMUX_EM3_ALWAYS 0x0000F000 // Always (continuously sample) +#define ADC_EMUX_EM2_M 0x00000F00 // SS2 Trigger Select +#define ADC_EMUX_EM2_PROCESSOR 0x00000000 // Processor (default) +#define ADC_EMUX_EM2_COMP0 0x00000100 // Analog Comparator 0 +#define ADC_EMUX_EM2_COMP1 0x00000200 // Analog Comparator 1 +#define ADC_EMUX_EM2_COMP2 0x00000300 // Analog Comparator 2 +#define ADC_EMUX_EM2_EXTERNAL 0x00000400 // External (GPIO PB4) +#define ADC_EMUX_EM2_TIMER 0x00000500 // Timer +#define ADC_EMUX_EM2_PWM0 0x00000600 // PWM0 +#define ADC_EMUX_EM2_PWM1 0x00000700 // PWM1 +#define ADC_EMUX_EM2_PWM2 0x00000800 // PWM2 +#define ADC_EMUX_EM2_PWM3 0x00000900 // PWM3 +#define ADC_EMUX_EM2_ALWAYS 0x00000F00 // Always (continuously sample) +#define ADC_EMUX_EM1_M 0x000000F0 // SS1 Trigger Select +#define ADC_EMUX_EM1_PROCESSOR 0x00000000 // Processor (default) +#define ADC_EMUX_EM1_COMP0 0x00000010 // Analog Comparator 0 +#define ADC_EMUX_EM1_COMP1 0x00000020 // Analog Comparator 1 +#define ADC_EMUX_EM1_COMP2 0x00000030 // Analog Comparator 2 +#define ADC_EMUX_EM1_EXTERNAL 0x00000040 // External (GPIO PB4) +#define ADC_EMUX_EM1_TIMER 0x00000050 // Timer +#define ADC_EMUX_EM1_PWM0 0x00000060 // PWM0 +#define ADC_EMUX_EM1_PWM1 0x00000070 // PWM1 +#define ADC_EMUX_EM1_PWM2 0x00000080 // PWM2 +#define ADC_EMUX_EM1_PWM3 0x00000090 // PWM3 +#define ADC_EMUX_EM1_ALWAYS 0x000000F0 // Always (continuously sample) +#define ADC_EMUX_EM0_M 0x0000000F // SS0 Trigger Select +#define ADC_EMUX_EM0_PROCESSOR 0x00000000 // Processor (default) +#define ADC_EMUX_EM0_COMP0 0x00000001 // Analog Comparator 0 +#define ADC_EMUX_EM0_COMP1 0x00000002 // Analog Comparator 1 +#define ADC_EMUX_EM0_COMP2 0x00000003 // Analog Comparator 2 +#define ADC_EMUX_EM0_EXTERNAL 0x00000004 // External (GPIO PB4) +#define ADC_EMUX_EM0_TIMER 0x00000005 // Timer +#define ADC_EMUX_EM0_PWM0 0x00000006 // PWM0 +#define ADC_EMUX_EM0_PWM1 0x00000007 // PWM1 +#define ADC_EMUX_EM0_PWM2 0x00000008 // PWM2 +#define ADC_EMUX_EM0_PWM3 0x00000009 // PWM3 +#define ADC_EMUX_EM0_ALWAYS 0x0000000F // Always (continuously sample) + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_USTAT register. +// +//***************************************************************************** +#define ADC_USTAT_UV3 0x00000008 // SS3 FIFO Underflow +#define ADC_USTAT_UV2 0x00000004 // SS2 FIFO Underflow +#define ADC_USTAT_UV1 0x00000002 // SS1 FIFO Underflow +#define ADC_USTAT_UV0 0x00000001 // SS0 FIFO Underflow + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSPRI register. +// +//***************************************************************************** +#define ADC_SSPRI_SS3_M 0x00003000 // SS3 Priority +#define ADC_SSPRI_SS3_1ST 0x00000000 // First priority +#define ADC_SSPRI_SS3_2ND 0x00001000 // Second priority +#define ADC_SSPRI_SS3_3RD 0x00002000 // Third priority +#define ADC_SSPRI_SS3_4TH 0x00003000 // Fourth priority +#define ADC_SSPRI_SS2_M 0x00000300 // SS2 Priority +#define ADC_SSPRI_SS2_1ST 0x00000000 // First priority +#define ADC_SSPRI_SS2_2ND 0x00000100 // Second priority +#define ADC_SSPRI_SS2_3RD 0x00000200 // Third priority +#define ADC_SSPRI_SS2_4TH 0x00000300 // Fourth priority +#define ADC_SSPRI_SS1_M 0x00000030 // SS1 Priority +#define ADC_SSPRI_SS1_1ST 0x00000000 // First priority +#define ADC_SSPRI_SS1_2ND 0x00000010 // Second priority +#define ADC_SSPRI_SS1_3RD 0x00000020 // Third priority +#define ADC_SSPRI_SS1_4TH 0x00000030 // Fourth priority +#define ADC_SSPRI_SS0_M 0x00000003 // SS0 Priority +#define ADC_SSPRI_SS0_1ST 0x00000000 // First priority +#define ADC_SSPRI_SS0_2ND 0x00000001 // Second priority +#define ADC_SSPRI_SS0_3RD 0x00000002 // Third priority +#define ADC_SSPRI_SS0_4TH 0x00000003 // Fourth priority + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SPC register. +// +//***************************************************************************** +#define ADC_SPC_PHASE_M 0x0000000F // Phase Difference +#define ADC_SPC_PHASE_0 0x00000000 // ADC sample lags by 0.0 +#define ADC_SPC_PHASE_22_5 0x00000001 // ADC sample lags by 22.5 +#define ADC_SPC_PHASE_45 0x00000002 // ADC sample lags by 45.0 +#define ADC_SPC_PHASE_67_5 0x00000003 // ADC sample lags by 67.5 +#define ADC_SPC_PHASE_90 0x00000004 // ADC sample lags by 90.0 +#define ADC_SPC_PHASE_112_5 0x00000005 // ADC sample lags by 112.5 +#define ADC_SPC_PHASE_135 0x00000006 // ADC sample lags by 135.0 +#define ADC_SPC_PHASE_157_5 0x00000007 // ADC sample lags by 157.5 +#define ADC_SPC_PHASE_180 0x00000008 // ADC sample lags by 180.0 +#define ADC_SPC_PHASE_202_5 0x00000009 // ADC sample lags by 202.5 +#define ADC_SPC_PHASE_225 0x0000000A // ADC sample lags by 225.0 +#define ADC_SPC_PHASE_247_5 0x0000000B // ADC sample lags by 247.5 +#define ADC_SPC_PHASE_270 0x0000000C // ADC sample lags by 270.0 +#define ADC_SPC_PHASE_292_5 0x0000000D // ADC sample lags by 292.5 +#define ADC_SPC_PHASE_315 0x0000000E // ADC sample lags by 315.0 +#define ADC_SPC_PHASE_337_5 0x0000000F // ADC sample lags by 337.5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_PSSI register. +// +//***************************************************************************** +#define ADC_PSSI_GSYNC 0x80000000 // Global Synchronize +#define ADC_PSSI_SYNCWAIT 0x08000000 // Synchronize Wait +#define ADC_PSSI_SS3 0x00000008 // SS3 Initiate +#define ADC_PSSI_SS2 0x00000004 // SS2 Initiate +#define ADC_PSSI_SS1 0x00000002 // SS1 Initiate +#define ADC_PSSI_SS0 0x00000001 // SS0 Initiate + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SAC register. +// +//***************************************************************************** +#define ADC_SAC_AVG_M 0x00000007 // Hardware Averaging Control +#define ADC_SAC_AVG_OFF 0x00000000 // No hardware oversampling +#define ADC_SAC_AVG_2X 0x00000001 // 2x hardware oversampling +#define ADC_SAC_AVG_4X 0x00000002 // 4x hardware oversampling +#define ADC_SAC_AVG_8X 0x00000003 // 8x hardware oversampling +#define ADC_SAC_AVG_16X 0x00000004 // 16x hardware oversampling +#define ADC_SAC_AVG_32X 0x00000005 // 32x hardware oversampling +#define ADC_SAC_AVG_64X 0x00000006 // 64x hardware oversampling + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCISC register. +// +//***************************************************************************** +#define ADC_DCISC_DCINT7 0x00000080 // Digital Comparator 7 Interrupt + // Status and Clear +#define ADC_DCISC_DCINT6 0x00000040 // Digital Comparator 6 Interrupt + // Status and Clear +#define ADC_DCISC_DCINT5 0x00000020 // Digital Comparator 5 Interrupt + // Status and Clear +#define ADC_DCISC_DCINT4 0x00000010 // Digital Comparator 4 Interrupt + // Status and Clear +#define ADC_DCISC_DCINT3 0x00000008 // Digital Comparator 3 Interrupt + // Status and Clear +#define ADC_DCISC_DCINT2 0x00000004 // Digital Comparator 2 Interrupt + // Status and Clear +#define ADC_DCISC_DCINT1 0x00000002 // Digital Comparator 1 Interrupt + // Status and Clear +#define ADC_DCISC_DCINT0 0x00000001 // Digital Comparator 0 Interrupt + // Status and Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_CTL register. +// +//***************************************************************************** +#define ADC_CTL_VREF 0x00000001 // Voltage Reference Select + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSMUX0 register. +// +//***************************************************************************** +#define ADC_SSMUX0_MUX7_M 0xF0000000 // 8th Sample Input Select +#define ADC_SSMUX0_MUX6_M 0x0F000000 // 7th Sample Input Select +#define ADC_SSMUX0_MUX5_M 0x00F00000 // 6th Sample Input Select +#define ADC_SSMUX0_MUX4_M 0x000F0000 // 5th Sample Input Select +#define ADC_SSMUX0_MUX3_M 0x0000F000 // 4th Sample Input Select +#define ADC_SSMUX0_MUX2_M 0x00000F00 // 3rd Sample Input Select +#define ADC_SSMUX0_MUX1_M 0x000000F0 // 2nd Sample Input Select +#define ADC_SSMUX0_MUX0_M 0x0000000F // 1st Sample Input Select +#define ADC_SSMUX0_MUX7_S 28 +#define ADC_SSMUX0_MUX6_S 24 +#define ADC_SSMUX0_MUX5_S 20 +#define ADC_SSMUX0_MUX4_S 16 +#define ADC_SSMUX0_MUX3_S 12 +#define ADC_SSMUX0_MUX2_S 8 +#define ADC_SSMUX0_MUX1_S 4 +#define ADC_SSMUX0_MUX0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSCTL0 register. +// +//***************************************************************************** +#define ADC_SSCTL0_TS7 0x80000000 // 8th Sample Temp Sensor Select +#define ADC_SSCTL0_IE7 0x40000000 // 8th Sample Interrupt Enable +#define ADC_SSCTL0_END7 0x20000000 // 8th Sample is End of Sequence +#define ADC_SSCTL0_D7 0x10000000 // 8th Sample Diff Input Select +#define ADC_SSCTL0_TS6 0x08000000 // 7th Sample Temp Sensor Select +#define ADC_SSCTL0_IE6 0x04000000 // 7th Sample Interrupt Enable +#define ADC_SSCTL0_END6 0x02000000 // 7th Sample is End of Sequence +#define ADC_SSCTL0_D6 0x01000000 // 7th Sample Diff Input Select +#define ADC_SSCTL0_TS5 0x00800000 // 6th Sample Temp Sensor Select +#define ADC_SSCTL0_IE5 0x00400000 // 6th Sample Interrupt Enable +#define ADC_SSCTL0_END5 0x00200000 // 6th Sample is End of Sequence +#define ADC_SSCTL0_D5 0x00100000 // 6th Sample Diff Input Select +#define ADC_SSCTL0_TS4 0x00080000 // 5th Sample Temp Sensor Select +#define ADC_SSCTL0_IE4 0x00040000 // 5th Sample Interrupt Enable +#define ADC_SSCTL0_END4 0x00020000 // 5th Sample is End of Sequence +#define ADC_SSCTL0_D4 0x00010000 // 5th Sample Diff Input Select +#define ADC_SSCTL0_TS3 0x00008000 // 4th Sample Temp Sensor Select +#define ADC_SSCTL0_IE3 0x00004000 // 4th Sample Interrupt Enable +#define ADC_SSCTL0_END3 0x00002000 // 4th Sample is End of Sequence +#define ADC_SSCTL0_D3 0x00001000 // 4th Sample Diff Input Select +#define ADC_SSCTL0_TS2 0x00000800 // 3rd Sample Temp Sensor Select +#define ADC_SSCTL0_IE2 0x00000400 // 3rd Sample Interrupt Enable +#define ADC_SSCTL0_END2 0x00000200 // 3rd Sample is End of Sequence +#define ADC_SSCTL0_D2 0x00000100 // 3rd Sample Diff Input Select +#define ADC_SSCTL0_TS1 0x00000080 // 2nd Sample Temp Sensor Select +#define ADC_SSCTL0_IE1 0x00000040 // 2nd Sample Interrupt Enable +#define ADC_SSCTL0_END1 0x00000020 // 2nd Sample is End of Sequence +#define ADC_SSCTL0_D1 0x00000010 // 2nd Sample Diff Input Select +#define ADC_SSCTL0_TS0 0x00000008 // 1st Sample Temp Sensor Select +#define ADC_SSCTL0_IE0 0x00000004 // 1st Sample Interrupt Enable +#define ADC_SSCTL0_END0 0x00000002 // 1st Sample is End of Sequence +#define ADC_SSCTL0_D0 0x00000001 // 1st Sample Diff Input Select + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSFIFO0 register. +// +//***************************************************************************** +#define ADC_SSFIFO0_DATA_M 0x000003FF // Conversion Result Data +#define ADC_SSFIFO0_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSFSTAT0 register. +// +//***************************************************************************** +#define ADC_SSFSTAT0_FULL 0x00001000 // FIFO Full +#define ADC_SSFSTAT0_EMPTY 0x00000100 // FIFO Empty +#define ADC_SSFSTAT0_HPTR_M 0x000000F0 // FIFO Head Pointer +#define ADC_SSFSTAT0_TPTR_M 0x0000000F // FIFO Tail Pointer +#define ADC_SSFSTAT0_HPTR_S 4 +#define ADC_SSFSTAT0_TPTR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSOP0 register. +// +//***************************************************************************** +#define ADC_SSOP0_S7DCOP 0x10000000 // Sample 7 Digital Comparator + // Operation +#define ADC_SSOP0_S6DCOP 0x01000000 // Sample 6 Digital Comparator + // Operation +#define ADC_SSOP0_S5DCOP 0x00100000 // Sample 5 Digital Comparator + // Operation +#define ADC_SSOP0_S4DCOP 0x00010000 // Sample 4 Digital Comparator + // Operation +#define ADC_SSOP0_S3DCOP 0x00001000 // Sample 3 Digital Comparator + // Operation +#define ADC_SSOP0_S2DCOP 0x00000100 // Sample 2 Digital Comparator + // Operation +#define ADC_SSOP0_S1DCOP 0x00000010 // Sample 1 Digital Comparator + // Operation +#define ADC_SSOP0_S0DCOP 0x00000001 // Sample 0 Digital Comparator + // Operation + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSDC0 register. +// +//***************************************************************************** +#define ADC_SSDC0_S7DCSEL_M 0xF0000000 // Sample 7 Digital Comparator + // Select +#define ADC_SSDC0_S6DCSEL_M 0x0F000000 // Sample 6 Digital Comparator + // Select +#define ADC_SSDC0_S5DCSEL_M 0x00F00000 // Sample 5 Digital Comparator + // Select +#define ADC_SSDC0_S4DCSEL_M 0x000F0000 // Sample 4 Digital Comparator + // Select +#define ADC_SSDC0_S3DCSEL_M 0x0000F000 // Sample 3 Digital Comparator + // Select +#define ADC_SSDC0_S2DCSEL_M 0x00000F00 // Sample 2 Digital Comparator + // Select +#define ADC_SSDC0_S1DCSEL_M 0x000000F0 // Sample 1 Digital Comparator + // Select +#define ADC_SSDC0_S0DCSEL_M 0x0000000F // Sample 0 Digital Comparator + // Select +#define ADC_SSDC0_S6DCSEL_S 24 +#define ADC_SSDC0_S5DCSEL_S 20 +#define ADC_SSDC0_S4DCSEL_S 16 +#define ADC_SSDC0_S3DCSEL_S 12 +#define ADC_SSDC0_S2DCSEL_S 8 +#define ADC_SSDC0_S1DCSEL_S 4 +#define ADC_SSDC0_S0DCSEL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSMUX1 register. +// +//***************************************************************************** +#define ADC_SSMUX1_MUX3_M 0x0000F000 // 4th Sample Input Select +#define ADC_SSMUX1_MUX2_M 0x00000F00 // 3rd Sample Input Select +#define ADC_SSMUX1_MUX1_M 0x000000F0 // 2nd Sample Input Select +#define ADC_SSMUX1_MUX0_M 0x0000000F // 1st Sample Input Select +#define ADC_SSMUX1_MUX3_S 12 +#define ADC_SSMUX1_MUX2_S 8 +#define ADC_SSMUX1_MUX1_S 4 +#define ADC_SSMUX1_MUX0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSCTL1 register. +// +//***************************************************************************** +#define ADC_SSCTL1_TS3 0x00008000 // 4th Sample Temp Sensor Select +#define ADC_SSCTL1_IE3 0x00004000 // 4th Sample Interrupt Enable +#define ADC_SSCTL1_END3 0x00002000 // 4th Sample is End of Sequence +#define ADC_SSCTL1_D3 0x00001000 // 4th Sample Diff Input Select +#define ADC_SSCTL1_TS2 0x00000800 // 3rd Sample Temp Sensor Select +#define ADC_SSCTL1_IE2 0x00000400 // 3rd Sample Interrupt Enable +#define ADC_SSCTL1_END2 0x00000200 // 3rd Sample is End of Sequence +#define ADC_SSCTL1_D2 0x00000100 // 3rd Sample Diff Input Select +#define ADC_SSCTL1_TS1 0x00000080 // 2nd Sample Temp Sensor Select +#define ADC_SSCTL1_IE1 0x00000040 // 2nd Sample Interrupt Enable +#define ADC_SSCTL1_END1 0x00000020 // 2nd Sample is End of Sequence +#define ADC_SSCTL1_D1 0x00000010 // 2nd Sample Diff Input Select +#define ADC_SSCTL1_TS0 0x00000008 // 1st Sample Temp Sensor Select +#define ADC_SSCTL1_IE0 0x00000004 // 1st Sample Interrupt Enable +#define ADC_SSCTL1_END0 0x00000002 // 1st Sample is End of Sequence +#define ADC_SSCTL1_D0 0x00000001 // 1st Sample Diff Input Select + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSFIFO1 register. +// +//***************************************************************************** +#define ADC_SSFIFO1_DATA_M 0x000003FF // Conversion Result Data +#define ADC_SSFIFO1_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSFSTAT1 register. +// +//***************************************************************************** +#define ADC_SSFSTAT1_FULL 0x00001000 // FIFO Full +#define ADC_SSFSTAT1_EMPTY 0x00000100 // FIFO Empty +#define ADC_SSFSTAT1_HPTR_M 0x000000F0 // FIFO Head Pointer +#define ADC_SSFSTAT1_TPTR_M 0x0000000F // FIFO Tail Pointer +#define ADC_SSFSTAT1_HPTR_S 4 +#define ADC_SSFSTAT1_TPTR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSOP1 register. +// +//***************************************************************************** +#define ADC_SSOP1_S3DCOP 0x00001000 // Sample 3 Digital Comparator + // Operation +#define ADC_SSOP1_S2DCOP 0x00000100 // Sample 2 Digital Comparator + // Operation +#define ADC_SSOP1_S1DCOP 0x00000010 // Sample 1 Digital Comparator + // Operation +#define ADC_SSOP1_S0DCOP 0x00000001 // Sample 0 Digital Comparator + // Operation + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSDC1 register. +// +//***************************************************************************** +#define ADC_SSDC1_S3DCSEL_M 0x0000F000 // Sample 3 Digital Comparator + // Select +#define ADC_SSDC1_S2DCSEL_M 0x00000F00 // Sample 2 Digital Comparator + // Select +#define ADC_SSDC1_S1DCSEL_M 0x000000F0 // Sample 1 Digital Comparator + // Select +#define ADC_SSDC1_S0DCSEL_M 0x0000000F // Sample 0 Digital Comparator + // Select +#define ADC_SSDC1_S2DCSEL_S 8 +#define ADC_SSDC1_S1DCSEL_S 4 +#define ADC_SSDC1_S0DCSEL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSMUX2 register. +// +//***************************************************************************** +#define ADC_SSMUX2_MUX3_M 0x0000F000 // 4th Sample Input Select +#define ADC_SSMUX2_MUX2_M 0x00000F00 // 3rd Sample Input Select +#define ADC_SSMUX2_MUX1_M 0x000000F0 // 2nd Sample Input Select +#define ADC_SSMUX2_MUX0_M 0x0000000F // 1st Sample Input Select +#define ADC_SSMUX2_MUX3_S 12 +#define ADC_SSMUX2_MUX2_S 8 +#define ADC_SSMUX2_MUX1_S 4 +#define ADC_SSMUX2_MUX0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSCTL2 register. +// +//***************************************************************************** +#define ADC_SSCTL2_TS3 0x00008000 // 4th Sample Temp Sensor Select +#define ADC_SSCTL2_IE3 0x00004000 // 4th Sample Interrupt Enable +#define ADC_SSCTL2_END3 0x00002000 // 4th Sample is End of Sequence +#define ADC_SSCTL2_D3 0x00001000 // 4th Sample Diff Input Select +#define ADC_SSCTL2_TS2 0x00000800 // 3rd Sample Temp Sensor Select +#define ADC_SSCTL2_IE2 0x00000400 // 3rd Sample Interrupt Enable +#define ADC_SSCTL2_END2 0x00000200 // 3rd Sample is End of Sequence +#define ADC_SSCTL2_D2 0x00000100 // 3rd Sample Diff Input Select +#define ADC_SSCTL2_TS1 0x00000080 // 2nd Sample Temp Sensor Select +#define ADC_SSCTL2_IE1 0x00000040 // 2nd Sample Interrupt Enable +#define ADC_SSCTL2_END1 0x00000020 // 2nd Sample is End of Sequence +#define ADC_SSCTL2_D1 0x00000010 // 2nd Sample Diff Input Select +#define ADC_SSCTL2_TS0 0x00000008 // 1st Sample Temp Sensor Select +#define ADC_SSCTL2_IE0 0x00000004 // 1st Sample Interrupt Enable +#define ADC_SSCTL2_END0 0x00000002 // 1st Sample is End of Sequence +#define ADC_SSCTL2_D0 0x00000001 // 1st Sample Diff Input Select + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSFIFO2 register. +// +//***************************************************************************** +#define ADC_SSFIFO2_DATA_M 0x000003FF // Conversion Result Data +#define ADC_SSFIFO2_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSFSTAT2 register. +// +//***************************************************************************** +#define ADC_SSFSTAT2_FULL 0x00001000 // FIFO Full +#define ADC_SSFSTAT2_EMPTY 0x00000100 // FIFO Empty +#define ADC_SSFSTAT2_HPTR_M 0x000000F0 // FIFO Head Pointer +#define ADC_SSFSTAT2_TPTR_M 0x0000000F // FIFO Tail Pointer +#define ADC_SSFSTAT2_HPTR_S 4 +#define ADC_SSFSTAT2_TPTR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSOP2 register. +// +//***************************************************************************** +#define ADC_SSOP2_S3DCOP 0x00001000 // Sample 3 Digital Comparator + // Operation +#define ADC_SSOP2_S2DCOP 0x00000100 // Sample 2 Digital Comparator + // Operation +#define ADC_SSOP2_S1DCOP 0x00000010 // Sample 1 Digital Comparator + // Operation +#define ADC_SSOP2_S0DCOP 0x00000001 // Sample 0 Digital Comparator + // Operation + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSDC2 register. +// +//***************************************************************************** +#define ADC_SSDC2_S3DCSEL_M 0x0000F000 // Sample 3 Digital Comparator + // Select +#define ADC_SSDC2_S2DCSEL_M 0x00000F00 // Sample 2 Digital Comparator + // Select +#define ADC_SSDC2_S1DCSEL_M 0x000000F0 // Sample 1 Digital Comparator + // Select +#define ADC_SSDC2_S0DCSEL_M 0x0000000F // Sample 0 Digital Comparator + // Select +#define ADC_SSDC2_S2DCSEL_S 8 +#define ADC_SSDC2_S1DCSEL_S 4 +#define ADC_SSDC2_S0DCSEL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSMUX3 register. +// +//***************************************************************************** +#define ADC_SSMUX3_MUX0_M 0x0000000F // 1st Sample Input Select +#define ADC_SSMUX3_MUX0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSCTL3 register. +// +//***************************************************************************** +#define ADC_SSCTL3_TS0 0x00000008 // 1st Sample Temp Sensor Select +#define ADC_SSCTL3_IE0 0x00000004 // 1st Sample Interrupt Enable +#define ADC_SSCTL3_END0 0x00000002 // 1st Sample is End of Sequence +#define ADC_SSCTL3_D0 0x00000001 // 1st Sample Diff Input Select + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSFIFO3 register. +// +//***************************************************************************** +#define ADC_SSFIFO3_DATA_M 0x000003FF // Conversion Result Data +#define ADC_SSFIFO3_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSFSTAT3 register. +// +//***************************************************************************** +#define ADC_SSFSTAT3_FULL 0x00001000 // FIFO Full +#define ADC_SSFSTAT3_EMPTY 0x00000100 // FIFO Empty +#define ADC_SSFSTAT3_HPTR_M 0x000000F0 // FIFO Head Pointer +#define ADC_SSFSTAT3_TPTR_M 0x0000000F // FIFO Tail Pointer +#define ADC_SSFSTAT3_HPTR_S 4 +#define ADC_SSFSTAT3_TPTR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSOP3 register. +// +//***************************************************************************** +#define ADC_SSOP3_S0DCOP 0x00000001 // Sample 0 Digital Comparator + // Operation + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSDC3 register. +// +//***************************************************************************** +#define ADC_SSDC3_S0DCSEL_M 0x0000000F // Sample 0 Digital Comparator + // Select + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_TMLB register. +// +//***************************************************************************** +#define ADC_TMLB_LB 0x00000001 // Loopback Mode Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCRIC register. +// +//***************************************************************************** +#define ADC_DCRIC_DCTRIG7 0x00800000 // Digital Comparator Trigger 7 +#define ADC_DCRIC_DCTRIG6 0x00400000 // Digital Comparator Trigger 6 +#define ADC_DCRIC_DCTRIG5 0x00200000 // Digital Comparator Trigger 5 +#define ADC_DCRIC_DCTRIG4 0x00100000 // Digital Comparator Trigger 4 +#define ADC_DCRIC_DCTRIG3 0x00080000 // Digital Comparator Trigger 3 +#define ADC_DCRIC_DCTRIG2 0x00040000 // Digital Comparator Trigger 2 +#define ADC_DCRIC_DCTRIG1 0x00020000 // Digital Comparator Trigger 1 +#define ADC_DCRIC_DCTRIG0 0x00010000 // Digital Comparator Trigger 0 +#define ADC_DCRIC_DCINT7 0x00000080 // Digital Comparator Interrupt 7 +#define ADC_DCRIC_DCINT6 0x00000040 // Digital Comparator Interrupt 6 +#define ADC_DCRIC_DCINT5 0x00000020 // Digital Comparator Interrupt 5 +#define ADC_DCRIC_DCINT4 0x00000010 // Digital Comparator Interrupt 4 +#define ADC_DCRIC_DCINT3 0x00000008 // Digital Comparator Interrupt 3 +#define ADC_DCRIC_DCINT2 0x00000004 // Digital Comparator Interrupt 2 +#define ADC_DCRIC_DCINT1 0x00000002 // Digital Comparator Interrupt 1 +#define ADC_DCRIC_DCINT0 0x00000001 // Digital Comparator Interrupt 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCTL0 register. +// +//***************************************************************************** +#define ADC_DCCTL0_CTE 0x00001000 // Comparison Trigger Enable +#define ADC_DCCTL0_CTC_M 0x00000C00 // Comparison Trigger Condition +#define ADC_DCCTL0_CTC_LOW 0x00000000 // Low Band +#define ADC_DCCTL0_CTC_MID 0x00000400 // Mid Band +#define ADC_DCCTL0_CTC_HIGH 0x00000C00 // High Band +#define ADC_DCCTL0_CTM_M 0x00000300 // Comparison Trigger Mode +#define ADC_DCCTL0_CTM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL0_CTM_ONCE 0x00000100 // Once +#define ADC_DCCTL0_CTM_HALWAYS 0x00000200 // Hysteresis Always +#define ADC_DCCTL0_CTM_HONCE 0x00000300 // Hysteresis Once +#define ADC_DCCTL0_CIE 0x00000010 // Comparison Interrupt Enable +#define ADC_DCCTL0_CIC_M 0x0000000C // Comparison Interrupt Condition +#define ADC_DCCTL0_CIC_LOW 0x00000000 // Low Band +#define ADC_DCCTL0_CIC_MID 0x00000004 // Mid Band +#define ADC_DCCTL0_CIC_HIGH 0x0000000C // High Band +#define ADC_DCCTL0_CIM_M 0x00000003 // Comparison Interrupt Mode +#define ADC_DCCTL0_CIM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL0_CIM_ONCE 0x00000001 // Once +#define ADC_DCCTL0_CIM_HALWAYS 0x00000002 // Hysteresis Always +#define ADC_DCCTL0_CIM_HONCE 0x00000003 // Hysteresis Once + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCTL1 register. +// +//***************************************************************************** +#define ADC_DCCTL1_CTE 0x00001000 // Comparison Trigger Enable +#define ADC_DCCTL1_CTC_M 0x00000C00 // Comparison Trigger Condition +#define ADC_DCCTL1_CTC_LOW 0x00000000 // Low Band +#define ADC_DCCTL1_CTC_MID 0x00000400 // Mid Band +#define ADC_DCCTL1_CTC_HIGH 0x00000C00 // High Band +#define ADC_DCCTL1_CTM_M 0x00000300 // Comparison Trigger Mode +#define ADC_DCCTL1_CTM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL1_CTM_ONCE 0x00000100 // Once +#define ADC_DCCTL1_CTM_HALWAYS 0x00000200 // Hysteresis Always +#define ADC_DCCTL1_CTM_HONCE 0x00000300 // Hysteresis Once +#define ADC_DCCTL1_CIE 0x00000010 // Comparison Interrupt Enable +#define ADC_DCCTL1_CIC_M 0x0000000C // Comparison Interrupt Condition +#define ADC_DCCTL1_CIC_LOW 0x00000000 // Low Band +#define ADC_DCCTL1_CIC_MID 0x00000004 // Mid Band +#define ADC_DCCTL1_CIC_HIGH 0x0000000C // High Band +#define ADC_DCCTL1_CIM_M 0x00000003 // Comparison Interrupt Mode +#define ADC_DCCTL1_CIM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL1_CIM_ONCE 0x00000001 // Once +#define ADC_DCCTL1_CIM_HALWAYS 0x00000002 // Hysteresis Always +#define ADC_DCCTL1_CIM_HONCE 0x00000003 // Hysteresis Once + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCTL2 register. +// +//***************************************************************************** +#define ADC_DCCTL2_CTE 0x00001000 // Comparison Trigger Enable +#define ADC_DCCTL2_CTC_M 0x00000C00 // Comparison Trigger Condition +#define ADC_DCCTL2_CTC_LOW 0x00000000 // Low Band +#define ADC_DCCTL2_CTC_MID 0x00000400 // Mid Band +#define ADC_DCCTL2_CTC_HIGH 0x00000C00 // High Band +#define ADC_DCCTL2_CTM_M 0x00000300 // Comparison Trigger Mode +#define ADC_DCCTL2_CTM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL2_CTM_ONCE 0x00000100 // Once +#define ADC_DCCTL2_CTM_HALWAYS 0x00000200 // Hysteresis Always +#define ADC_DCCTL2_CTM_HONCE 0x00000300 // Hysteresis Once +#define ADC_DCCTL2_CIE 0x00000010 // Comparison Interrupt Enable +#define ADC_DCCTL2_CIC_M 0x0000000C // Comparison Interrupt Condition +#define ADC_DCCTL2_CIC_LOW 0x00000000 // Low Band +#define ADC_DCCTL2_CIC_MID 0x00000004 // Mid Band +#define ADC_DCCTL2_CIC_HIGH 0x0000000C // High Band +#define ADC_DCCTL2_CIM_M 0x00000003 // Comparison Interrupt Mode +#define ADC_DCCTL2_CIM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL2_CIM_ONCE 0x00000001 // Once +#define ADC_DCCTL2_CIM_HALWAYS 0x00000002 // Hysteresis Always +#define ADC_DCCTL2_CIM_HONCE 0x00000003 // Hysteresis Once + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCTL3 register. +// +//***************************************************************************** +#define ADC_DCCTL3_CTE 0x00001000 // Comparison Trigger Enable +#define ADC_DCCTL3_CTC_M 0x00000C00 // Comparison Trigger Condition +#define ADC_DCCTL3_CTC_LOW 0x00000000 // Low Band +#define ADC_DCCTL3_CTC_MID 0x00000400 // Mid Band +#define ADC_DCCTL3_CTC_HIGH 0x00000C00 // High Band +#define ADC_DCCTL3_CTM_M 0x00000300 // Comparison Trigger Mode +#define ADC_DCCTL3_CTM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL3_CTM_ONCE 0x00000100 // Once +#define ADC_DCCTL3_CTM_HALWAYS 0x00000200 // Hysteresis Always +#define ADC_DCCTL3_CTM_HONCE 0x00000300 // Hysteresis Once +#define ADC_DCCTL3_CIE 0x00000010 // Comparison Interrupt Enable +#define ADC_DCCTL3_CIC_M 0x0000000C // Comparison Interrupt Condition +#define ADC_DCCTL3_CIC_LOW 0x00000000 // Low Band +#define ADC_DCCTL3_CIC_MID 0x00000004 // Mid Band +#define ADC_DCCTL3_CIC_HIGH 0x0000000C // High Band +#define ADC_DCCTL3_CIM_M 0x00000003 // Comparison Interrupt Mode +#define ADC_DCCTL3_CIM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL3_CIM_ONCE 0x00000001 // Once +#define ADC_DCCTL3_CIM_HALWAYS 0x00000002 // Hysteresis Always +#define ADC_DCCTL3_CIM_HONCE 0x00000003 // Hysteresis Once + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCTL4 register. +// +//***************************************************************************** +#define ADC_DCCTL4_CTE 0x00001000 // Comparison Trigger Enable +#define ADC_DCCTL4_CTC_M 0x00000C00 // Comparison Trigger Condition +#define ADC_DCCTL4_CTC_LOW 0x00000000 // Low Band +#define ADC_DCCTL4_CTC_MID 0x00000400 // Mid Band +#define ADC_DCCTL4_CTC_HIGH 0x00000C00 // High Band +#define ADC_DCCTL4_CTM_M 0x00000300 // Comparison Trigger Mode +#define ADC_DCCTL4_CTM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL4_CTM_ONCE 0x00000100 // Once +#define ADC_DCCTL4_CTM_HALWAYS 0x00000200 // Hysteresis Always +#define ADC_DCCTL4_CTM_HONCE 0x00000300 // Hysteresis Once +#define ADC_DCCTL4_CIE 0x00000010 // Comparison Interrupt Enable +#define ADC_DCCTL4_CIC_M 0x0000000C // Comparison Interrupt Condition +#define ADC_DCCTL4_CIC_LOW 0x00000000 // Low Band +#define ADC_DCCTL4_CIC_MID 0x00000004 // Mid Band +#define ADC_DCCTL4_CIC_HIGH 0x0000000C // High Band +#define ADC_DCCTL4_CIM_M 0x00000003 // Comparison Interrupt Mode +#define ADC_DCCTL4_CIM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL4_CIM_ONCE 0x00000001 // Once +#define ADC_DCCTL4_CIM_HALWAYS 0x00000002 // Hysteresis Always +#define ADC_DCCTL4_CIM_HONCE 0x00000003 // Hysteresis Once + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCTL5 register. +// +//***************************************************************************** +#define ADC_DCCTL5_CTE 0x00001000 // Comparison Trigger Enable +#define ADC_DCCTL5_CTC_M 0x00000C00 // Comparison Trigger Condition +#define ADC_DCCTL5_CTC_LOW 0x00000000 // Low Band +#define ADC_DCCTL5_CTC_MID 0x00000400 // Mid Band +#define ADC_DCCTL5_CTC_HIGH 0x00000C00 // High Band +#define ADC_DCCTL5_CTM_M 0x00000300 // Comparison Trigger Mode +#define ADC_DCCTL5_CTM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL5_CTM_ONCE 0x00000100 // Once +#define ADC_DCCTL5_CTM_HALWAYS 0x00000200 // Hysteresis Always +#define ADC_DCCTL5_CTM_HONCE 0x00000300 // Hysteresis Once +#define ADC_DCCTL5_CIE 0x00000010 // Comparison Interrupt Enable +#define ADC_DCCTL5_CIC_M 0x0000000C // Comparison Interrupt Condition +#define ADC_DCCTL5_CIC_LOW 0x00000000 // Low Band +#define ADC_DCCTL5_CIC_MID 0x00000004 // Mid Band +#define ADC_DCCTL5_CIC_HIGH 0x0000000C // High Band +#define ADC_DCCTL5_CIM_M 0x00000003 // Comparison Interrupt Mode +#define ADC_DCCTL5_CIM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL5_CIM_ONCE 0x00000001 // Once +#define ADC_DCCTL5_CIM_HALWAYS 0x00000002 // Hysteresis Always +#define ADC_DCCTL5_CIM_HONCE 0x00000003 // Hysteresis Once + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCTL6 register. +// +//***************************************************************************** +#define ADC_DCCTL6_CTE 0x00001000 // Comparison Trigger Enable +#define ADC_DCCTL6_CTC_M 0x00000C00 // Comparison Trigger Condition +#define ADC_DCCTL6_CTC_LOW 0x00000000 // Low Band +#define ADC_DCCTL6_CTC_MID 0x00000400 // Mid Band +#define ADC_DCCTL6_CTC_HIGH 0x00000C00 // High Band +#define ADC_DCCTL6_CTM_M 0x00000300 // Comparison Trigger Mode +#define ADC_DCCTL6_CTM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL6_CTM_ONCE 0x00000100 // Once +#define ADC_DCCTL6_CTM_HALWAYS 0x00000200 // Hysteresis Always +#define ADC_DCCTL6_CTM_HONCE 0x00000300 // Hysteresis Once +#define ADC_DCCTL6_CIE 0x00000010 // Comparison Interrupt Enable +#define ADC_DCCTL6_CIC_M 0x0000000C // Comparison Interrupt Condition +#define ADC_DCCTL6_CIC_LOW 0x00000000 // Low Band +#define ADC_DCCTL6_CIC_MID 0x00000004 // Mid Band +#define ADC_DCCTL6_CIC_HIGH 0x0000000C // High Band +#define ADC_DCCTL6_CIM_M 0x00000003 // Comparison Interrupt Mode +#define ADC_DCCTL6_CIM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL6_CIM_ONCE 0x00000001 // Once +#define ADC_DCCTL6_CIM_HALWAYS 0x00000002 // Hysteresis Always +#define ADC_DCCTL6_CIM_HONCE 0x00000003 // Hysteresis Once + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCTL7 register. +// +//***************************************************************************** +#define ADC_DCCTL7_CTE 0x00001000 // Comparison Trigger Enable +#define ADC_DCCTL7_CTC_M 0x00000C00 // Comparison Trigger Condition +#define ADC_DCCTL7_CTC_LOW 0x00000000 // Low Band +#define ADC_DCCTL7_CTC_MID 0x00000400 // Mid Band +#define ADC_DCCTL7_CTC_HIGH 0x00000C00 // High Band +#define ADC_DCCTL7_CTM_M 0x00000300 // Comparison Trigger Mode +#define ADC_DCCTL7_CTM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL7_CTM_ONCE 0x00000100 // Once +#define ADC_DCCTL7_CTM_HALWAYS 0x00000200 // Hysteresis Always +#define ADC_DCCTL7_CTM_HONCE 0x00000300 // Hysteresis Once +#define ADC_DCCTL7_CIE 0x00000010 // Comparison Interrupt Enable +#define ADC_DCCTL7_CIC_M 0x0000000C // Comparison Interrupt Condition +#define ADC_DCCTL7_CIC_LOW 0x00000000 // Low Band +#define ADC_DCCTL7_CIC_MID 0x00000004 // Mid Band +#define ADC_DCCTL7_CIC_HIGH 0x0000000C // High Band +#define ADC_DCCTL7_CIM_M 0x00000003 // Comparison Interrupt Mode +#define ADC_DCCTL7_CIM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL7_CIM_ONCE 0x00000001 // Once +#define ADC_DCCTL7_CIM_HALWAYS 0x00000002 // Hysteresis Always +#define ADC_DCCTL7_CIM_HONCE 0x00000003 // Hysteresis Once + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCMP0 register. +// +//***************************************************************************** +#define ADC_DCCMP0_COMP1_M 0x03FF0000 // Compare 1 +#define ADC_DCCMP0_COMP0_M 0x000003FF // Compare 0 +#define ADC_DCCMP0_COMP1_S 16 +#define ADC_DCCMP0_COMP0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCMP1 register. +// +//***************************************************************************** +#define ADC_DCCMP1_COMP1_M 0x03FF0000 // Compare 1 +#define ADC_DCCMP1_COMP0_M 0x000003FF // Compare 0 +#define ADC_DCCMP1_COMP1_S 16 +#define ADC_DCCMP1_COMP0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCMP2 register. +// +//***************************************************************************** +#define ADC_DCCMP2_COMP1_M 0x03FF0000 // Compare 1 +#define ADC_DCCMP2_COMP0_M 0x000003FF // Compare 0 +#define ADC_DCCMP2_COMP1_S 16 +#define ADC_DCCMP2_COMP0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCMP3 register. +// +//***************************************************************************** +#define ADC_DCCMP3_COMP1_M 0x03FF0000 // Compare 1 +#define ADC_DCCMP3_COMP0_M 0x000003FF // Compare 0 +#define ADC_DCCMP3_COMP1_S 16 +#define ADC_DCCMP3_COMP0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCMP4 register. +// +//***************************************************************************** +#define ADC_DCCMP4_COMP1_M 0x03FF0000 // Compare 1 +#define ADC_DCCMP4_COMP0_M 0x000003FF // Compare 0 +#define ADC_DCCMP4_COMP1_S 16 +#define ADC_DCCMP4_COMP0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCMP5 register. +// +//***************************************************************************** +#define ADC_DCCMP5_COMP1_M 0x03FF0000 // Compare 1 +#define ADC_DCCMP5_COMP0_M 0x000003FF // Compare 0 +#define ADC_DCCMP5_COMP1_S 16 +#define ADC_DCCMP5_COMP0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCMP6 register. +// +//***************************************************************************** +#define ADC_DCCMP6_COMP1_M 0x03FF0000 // Compare 1 +#define ADC_DCCMP6_COMP0_M 0x000003FF // Compare 0 +#define ADC_DCCMP6_COMP1_S 16 +#define ADC_DCCMP6_COMP0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCMP7 register. +// +//***************************************************************************** +#define ADC_DCCMP7_COMP1_M 0x03FF0000 // Compare 1 +#define ADC_DCCMP7_COMP0_M 0x000003FF // Compare 0 +#define ADC_DCCMP7_COMP1_S 16 +#define ADC_DCCMP7_COMP0_S 0 + +//***************************************************************************** +// +// The following are defines for the the interpretation of the data in the +// SSFIFOx when the ADC TMLB is enabled. +// +//***************************************************************************** +#define ADC_SSFIFO_TMLB_CNT_M 0x000003C0 // Continuous Sample Counter +#define ADC_SSFIFO_TMLB_CONT 0x00000020 // Continuation Sample Indicator +#define ADC_SSFIFO_TMLB_DIFF 0x00000010 // Differential Sample Indicator +#define ADC_SSFIFO_TMLB_TS 0x00000008 // Temp Sensor Sample Indicator +#define ADC_SSFIFO_TMLB_MUX_M 0x00000007 // Analog Input Indicator +#define ADC_SSFIFO_TMLB_CNT_S 6 // Sample counter shift +#define ADC_SSFIFO_TMLB_MUX_S 0 // Input channel number shift + +//***************************************************************************** +// +// The following definitions are deprecated. +// +//***************************************************************************** +#ifndef DEPRECATED + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the ADC_O_EMUX +// register. +// +//***************************************************************************** +#define ADC_EMUX_EM3_MASK 0x0000F000 // Event mux 3 mask +#define ADC_EMUX_EM2_MASK 0x00000F00 // Event mux 2 mask +#define ADC_EMUX_EM1_MASK 0x000000F0 // Event mux 1 mask +#define ADC_EMUX_EM0_MASK 0x0000000F // Event mux 0 mask +#define ADC_EMUX_EM3_SHIFT 12 // The shift for the fourth event +#define ADC_EMUX_EM2_SHIFT 8 // The shift for the third event +#define ADC_EMUX_EM1_SHIFT 4 // The shift for the second event +#define ADC_EMUX_EM0_SHIFT 0 // The shift for the first event + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the ADC_O_SSPRI +// register. +// +//***************************************************************************** +#define ADC_SSPRI_SS3_MASK 0x00003000 // Sequencer 3 priority mask +#define ADC_SSPRI_SS2_MASK 0x00000300 // Sequencer 2 priority mask +#define ADC_SSPRI_SS1_MASK 0x00000030 // Sequencer 1 priority mask +#define ADC_SSPRI_SS0_MASK 0x00000003 // Sequencer 0 priority mask + +//***************************************************************************** +// +// The following are deprecated defines for the ADC sequence register offsets.. +// +//***************************************************************************** +#define ADC_O_SEQ 0x00000040 // Offset to the first sequence +#define ADC_O_SEQ_STEP 0x00000020 // Increment to the next sequence +#define ADC_O_X_SSFSTAT 0x0000000C // FIFO status register +#define ADC_O_X_SSFIFO 0x00000008 // Result FIFO register +#define ADC_O_X_SSCTL 0x00000004 // Sample sequence control register +#define ADC_O_X_SSMUX 0x00000000 // Multiplexer select register + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the ADC_SSMUX0, +// ADC_SSMUX1, ADC_SSMUX2, and ADC_SSMUX3 registers. Not all fields are present +// in all registers.. +// +//***************************************************************************** +#define ADC_SSMUX_MUX7_MASK 0x70000000 // 8th mux select mask +#define ADC_SSMUX_MUX6_MASK 0x07000000 // 7th mux select mask +#define ADC_SSMUX_MUX5_MASK 0x00700000 // 6th mux select mask +#define ADC_SSMUX_MUX4_MASK 0x00070000 // 5th mux select mask +#define ADC_SSMUX_MUX3_MASK 0x00007000 // 4th mux select mask +#define ADC_SSMUX_MUX2_MASK 0x00000700 // 3rd mux select mask +#define ADC_SSMUX_MUX1_MASK 0x00000070 // 2nd mux select mask +#define ADC_SSMUX_MUX0_MASK 0x00000007 // 1st mux select mask +#define ADC_SSMUX_MUX7_SHIFT 28 +#define ADC_SSMUX_MUX6_SHIFT 24 +#define ADC_SSMUX_MUX5_SHIFT 20 +#define ADC_SSMUX_MUX4_SHIFT 16 +#define ADC_SSMUX_MUX3_SHIFT 12 +#define ADC_SSMUX_MUX2_SHIFT 8 +#define ADC_SSMUX_MUX1_SHIFT 4 +#define ADC_SSMUX_MUX0_SHIFT 0 + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the ADC_SSCTL0, +// ADC_SSCTL1, ADC_SSCTL2, and ADC_SSCTL3 registers. Not all fields are present +// in all registers. +// +//***************************************************************************** +#define ADC_SSCTL_TS7 0x80000000 // 8th temperature sensor select +#define ADC_SSCTL_IE7 0x40000000 // 8th interrupt enable +#define ADC_SSCTL_END7 0x20000000 // 8th sequence end select +#define ADC_SSCTL_D7 0x10000000 // 8th differential select +#define ADC_SSCTL_TS6 0x08000000 // 7th temperature sensor select +#define ADC_SSCTL_IE6 0x04000000 // 7th interrupt enable +#define ADC_SSCTL_END6 0x02000000 // 7th sequence end select +#define ADC_SSCTL_D6 0x01000000 // 7th differential select +#define ADC_SSCTL_TS5 0x00800000 // 6th temperature sensor select +#define ADC_SSCTL_IE5 0x00400000 // 6th interrupt enable +#define ADC_SSCTL_END5 0x00200000 // 6th sequence end select +#define ADC_SSCTL_D5 0x00100000 // 6th differential select +#define ADC_SSCTL_TS4 0x00080000 // 5th temperature sensor select +#define ADC_SSCTL_IE4 0x00040000 // 5th interrupt enable +#define ADC_SSCTL_END4 0x00020000 // 5th sequence end select +#define ADC_SSCTL_D4 0x00010000 // 5th differential select +#define ADC_SSCTL_TS3 0x00008000 // 4th temperature sensor select +#define ADC_SSCTL_IE3 0x00004000 // 4th interrupt enable +#define ADC_SSCTL_END3 0x00002000 // 4th sequence end select +#define ADC_SSCTL_D3 0x00001000 // 4th differential select +#define ADC_SSCTL_TS2 0x00000800 // 3rd temperature sensor select +#define ADC_SSCTL_IE2 0x00000400 // 3rd interrupt enable +#define ADC_SSCTL_END2 0x00000200 // 3rd sequence end select +#define ADC_SSCTL_D2 0x00000100 // 3rd differential select +#define ADC_SSCTL_TS1 0x00000080 // 2nd temperature sensor select +#define ADC_SSCTL_IE1 0x00000040 // 2nd interrupt enable +#define ADC_SSCTL_END1 0x00000020 // 2nd sequence end select +#define ADC_SSCTL_D1 0x00000010 // 2nd differential select +#define ADC_SSCTL_TS0 0x00000008 // 1st temperature sensor select +#define ADC_SSCTL_IE0 0x00000004 // 1st interrupt enable +#define ADC_SSCTL_END0 0x00000002 // 1st sequence end select +#define ADC_SSCTL_D0 0x00000001 // 1st differential select + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the ADC_SSFIFO0, +// ADC_SSFIFO1, ADC_SSFIFO2, and ADC_SSFIFO3 registers. +// +//***************************************************************************** +#define ADC_SSFIFO_DATA_MASK 0x000003FF // Sample data +#define ADC_SSFIFO_DATA_SHIFT 0 + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the ADC_SSFSTAT0, +// ADC_SSFSTAT1, ADC_SSFSTAT2, and ADC_SSFSTAT3 registers. +// +//***************************************************************************** +#define ADC_SSFSTAT_FULL 0x00001000 // FIFO is full +#define ADC_SSFSTAT_EMPTY 0x00000100 // FIFO is empty +#define ADC_SSFSTAT_HPTR 0x000000F0 // FIFO head pointer +#define ADC_SSFSTAT_TPTR 0x0000000F // FIFO tail pointer + +//***************************************************************************** +// +// The following are deprecated defines for the the interpretation of the data +// in the SSFIFOx when the ADC TMLB is enabled. +// +//***************************************************************************** +#define ADC_TMLB_CNT_M 0x000003C0 // Continuous Sample Counter +#define ADC_TMLB_CONT 0x00000020 // Continuation Sample Indicator +#define ADC_TMLB_DIFF 0x00000010 // Differential Sample Indicator +#define ADC_TMLB_TS 0x00000008 // Temp Sensor Sample Indicator +#define ADC_TMLB_MUX_M 0x00000007 // Analog Input Indicator +#define ADC_TMLB_CNT_S 6 // Sample counter shift +#define ADC_TMLB_MUX_S 0 // Input channel number shift + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the loopback ADC +// data. +// +//***************************************************************************** +#define ADC_LB_CNT_MASK 0x000003C0 // Sample counter mask +#define ADC_LB_CONT 0x00000020 // Continuation sample +#define ADC_LB_DIFF 0x00000010 // Differential sample +#define ADC_LB_TS 0x00000008 // Temperature sensor sample +#define ADC_LB_MUX_MASK 0x00000007 // Input channel number mask +#define ADC_LB_CNT_SHIFT 6 // Sample counter shift +#define ADC_LB_MUX_SHIFT 0 // Input channel number shift + +#endif + +#endif // __HW_ADC_H__ diff --git a/bsp/lm3s_9b9x/Libraries/inc/hw_can.h b/bsp/lm3s_9b9x/Libraries/inc/hw_can.h new file mode 100644 index 0000000000000000000000000000000000000000..c4bdc08f0f3ff6d693bc83917bfec61f8455d7dc --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/inc/hw_can.h @@ -0,0 +1,756 @@ +//***************************************************************************** +// +// hw_can.h - Defines and macros used when accessing the CAN controllers. +// +// Copyright (c) 2006-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_CAN_H__ +#define __HW_CAN_H__ + +//***************************************************************************** +// +// The following are defines for the CAN register offsets. +// +//***************************************************************************** +#define CAN_O_CTL 0x00000000 // CAN Control +#define CAN_O_STS 0x00000004 // CAN Status +#define CAN_O_ERR 0x00000008 // CAN Error Counter +#define CAN_O_BIT 0x0000000C // CAN Bit Timing +#define CAN_O_INT 0x00000010 // CAN Interrupt +#define CAN_O_TST 0x00000014 // CAN Test +#define CAN_O_BRPE 0x00000018 // CAN Baud Rate Prescaler + // Extension +#define CAN_O_IF1CRQ 0x00000020 // CAN IF1 Command Request +#define CAN_O_IF1CMSK 0x00000024 // CAN IF1 Command Mask +#define CAN_O_IF1MSK1 0x00000028 // CAN IF1 Mask 1 +#define CAN_O_IF1MSK2 0x0000002C // CAN IF1 Mask 2 +#define CAN_O_IF1ARB1 0x00000030 // CAN IF1 Arbitration 1 +#define CAN_O_IF1ARB2 0x00000034 // CAN IF1 Arbitration 2 +#define CAN_O_IF1MCTL 0x00000038 // CAN IF1 Message Control +#define CAN_O_IF1DA1 0x0000003C // CAN IF1 Data A1 +#define CAN_O_IF1DA2 0x00000040 // CAN IF1 Data A2 +#define CAN_O_IF1DB1 0x00000044 // CAN IF1 Data B1 +#define CAN_O_IF1DB2 0x00000048 // CAN IF1 Data B2 +#define CAN_O_IF2CRQ 0x00000080 // CAN IF2 Command Request +#define CAN_O_IF2CMSK 0x00000084 // CAN IF2 Command Mask +#define CAN_O_IF2MSK1 0x00000088 // CAN IF2 Mask 1 +#define CAN_O_IF2MSK2 0x0000008C // CAN IF2 Mask 2 +#define CAN_O_IF2ARB1 0x00000090 // CAN IF2 Arbitration 1 +#define CAN_O_IF2ARB2 0x00000094 // CAN IF2 Arbitration 2 +#define CAN_O_IF2MCTL 0x00000098 // CAN IF2 Message Control +#define CAN_O_IF2DA1 0x0000009C // CAN IF2 Data A1 +#define CAN_O_IF2DA2 0x000000A0 // CAN IF2 Data A2 +#define CAN_O_IF2DB1 0x000000A4 // CAN IF2 Data B1 +#define CAN_O_IF2DB2 0x000000A8 // CAN IF2 Data B2 +#define CAN_O_TXRQ1 0x00000100 // CAN Transmission Request 1 +#define CAN_O_TXRQ2 0x00000104 // CAN Transmission Request 2 +#define CAN_O_NWDA1 0x00000120 // CAN New Data 1 +#define CAN_O_NWDA2 0x00000124 // CAN New Data 2 +#define CAN_O_MSG1INT 0x00000140 // CAN Message 1 Interrupt Pending +#define CAN_O_MSG2INT 0x00000144 // CAN Message 2 Interrupt Pending +#define CAN_O_MSG1VAL 0x00000160 // CAN Message 1 Valid +#define CAN_O_MSG2VAL 0x00000164 // CAN Message 2 Valid + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_CTL register. +// +//***************************************************************************** +#define CAN_CTL_TEST 0x00000080 // Test Mode Enable +#define CAN_CTL_CCE 0x00000040 // Configuration Change Enable +#define CAN_CTL_DAR 0x00000020 // Disable Automatic-Retransmission +#define CAN_CTL_EIE 0x00000008 // Error Interrupt Enable +#define CAN_CTL_SIE 0x00000004 // Status Interrupt Enable +#define CAN_CTL_IE 0x00000002 // CAN Interrupt Enable +#define CAN_CTL_INIT 0x00000001 // Initialization + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_STS register. +// +//***************************************************************************** +#define CAN_STS_BOFF 0x00000080 // Bus-Off Status +#define CAN_STS_EWARN 0x00000040 // Warning Status +#define CAN_STS_EPASS 0x00000020 // Error Passive +#define CAN_STS_RXOK 0x00000010 // Received a Message Successfully +#define CAN_STS_TXOK 0x00000008 // Transmitted a Message + // Successfully +#define CAN_STS_LEC_M 0x00000007 // Last Error Code +#define CAN_STS_LEC_NONE 0x00000000 // No Error +#define CAN_STS_LEC_STUFF 0x00000001 // Stuff Error +#define CAN_STS_LEC_FORM 0x00000002 // Format Error +#define CAN_STS_LEC_ACK 0x00000003 // ACK Error +#define CAN_STS_LEC_BIT1 0x00000004 // Bit 1 Error +#define CAN_STS_LEC_BIT0 0x00000005 // Bit 0 Error +#define CAN_STS_LEC_CRC 0x00000006 // CRC Error +#define CAN_STS_LEC_NOEVENT 0x00000007 // No Event + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_ERR register. +// +//***************************************************************************** +#define CAN_ERR_RP 0x00008000 // Received Error Passive +#define CAN_ERR_REC_M 0x00007F00 // Receive Error Counter +#define CAN_ERR_TEC_M 0x000000FF // Transmit Error Counter +#define CAN_ERR_REC_S 8 +#define CAN_ERR_TEC_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_BIT register. +// +//***************************************************************************** +#define CAN_BIT_TSEG2_M 0x00007000 // Time Segment after Sample Point +#define CAN_BIT_TSEG1_M 0x00000F00 // Time Segment Before Sample Point +#define CAN_BIT_SJW_M 0x000000C0 // (Re)Synchronization Jump Width +#define CAN_BIT_BRP_M 0x0000003F // Baud Rate Prescaler +#define CAN_BIT_TSEG2_S 12 +#define CAN_BIT_TSEG1_S 8 +#define CAN_BIT_SJW_S 6 +#define CAN_BIT_BRP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_INT register. +// +//***************************************************************************** +#define CAN_INT_INTID_M 0x0000FFFF // Interrupt Identifier +#define CAN_INT_INTID_NONE 0x00000000 // No interrupt pending +#define CAN_INT_INTID_STATUS 0x00008000 // Status Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_TST register. +// +//***************************************************************************** +#define CAN_TST_RX 0x00000080 // Receive Observation +#define CAN_TST_TX_M 0x00000060 // Transmit Control +#define CAN_TST_TX_CANCTL 0x00000000 // CAN Module Control +#define CAN_TST_TX_SAMPLE 0x00000020 // Sample Point +#define CAN_TST_TX_DOMINANT 0x00000040 // Driven Low +#define CAN_TST_TX_RECESSIVE 0x00000060 // Driven High +#define CAN_TST_LBACK 0x00000010 // Loopback Mode +#define CAN_TST_SILENT 0x00000008 // Silent Mode +#define CAN_TST_BASIC 0x00000004 // Basic Mode + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_BRPE register. +// +//***************************************************************************** +#define CAN_BRPE_BRPE_M 0x0000000F // Baud Rate Prescaler Extension +#define CAN_BRPE_BRPE_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1CRQ register. +// +//***************************************************************************** +#define CAN_IF1CRQ_BUSY 0x00008000 // Busy Flag +#define CAN_IF1CRQ_MNUM_M 0x0000003F // Message Number +#define CAN_IF1CRQ_MNUM_RSVD 0x00000000 // 0 is not a valid message number; + // it is interpreted as 0x20, or + // object 32 +#define CAN_IF1CRQ_MNUM_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1CMSK register. +// +//***************************************************************************** +#define CAN_IF1CMSK_WRNRD 0x00000080 // Write, Not Read +#define CAN_IF1CMSK_MASK 0x00000040 // Access Mask Bits +#define CAN_IF1CMSK_ARB 0x00000020 // Access Arbitration Bits +#define CAN_IF1CMSK_CONTROL 0x00000010 // Access Control Bits +#define CAN_IF1CMSK_CLRINTPND 0x00000008 // Clear Interrupt Pending Bit +#define CAN_IF1CMSK_NEWDAT 0x00000004 // Access New Data +#define CAN_IF1CMSK_TXRQST 0x00000004 // Access Transmission Request +#define CAN_IF1CMSK_DATAA 0x00000002 // Access Data Byte 0 to 3 +#define CAN_IF1CMSK_DATAB 0x00000001 // Access Data Byte 4 to 7 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1MSK1 register. +// +//***************************************************************************** +#define CAN_IF1MSK1_IDMSK_M 0x0000FFFF // Identifier Mask +#define CAN_IF1MSK1_IDMSK_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1MSK2 register. +// +//***************************************************************************** +#define CAN_IF1MSK2_MXTD 0x00008000 // Mask Extended Identifier +#define CAN_IF1MSK2_MDIR 0x00004000 // Mask Message Direction +#define CAN_IF1MSK2_IDMSK_M 0x00001FFF // Identifier Mask +#define CAN_IF1MSK2_IDMSK_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1ARB1 register. +// +//***************************************************************************** +#define CAN_IF1ARB1_ID_M 0x0000FFFF // Message Identifier +#define CAN_IF1ARB1_ID_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1ARB2 register. +// +//***************************************************************************** +#define CAN_IF1ARB2_MSGVAL 0x00008000 // Message Valid +#define CAN_IF1ARB2_XTD 0x00004000 // Extended Identifier +#define CAN_IF1ARB2_DIR 0x00002000 // Message Direction +#define CAN_IF1ARB2_ID_M 0x00001FFF // Message Identifier +#define CAN_IF1ARB2_ID_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1MCTL register. +// +//***************************************************************************** +#define CAN_IF1MCTL_NEWDAT 0x00008000 // New Data +#define CAN_IF1MCTL_MSGLST 0x00004000 // Message Lost +#define CAN_IF1MCTL_INTPND 0x00002000 // Interrupt Pending +#define CAN_IF1MCTL_UMASK 0x00001000 // Use Acceptance Mask +#define CAN_IF1MCTL_TXIE 0x00000800 // Transmit Interrupt Enable +#define CAN_IF1MCTL_RXIE 0x00000400 // Receive Interrupt Enable +#define CAN_IF1MCTL_RMTEN 0x00000200 // Remote Enable +#define CAN_IF1MCTL_TXRQST 0x00000100 // Transmit Request +#define CAN_IF1MCTL_EOB 0x00000080 // End of Buffer +#define CAN_IF1MCTL_DLC_M 0x0000000F // Data Length Code +#define CAN_IF1MCTL_DLC_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1DA1 register. +// +//***************************************************************************** +#define CAN_IF1DA1_DATA_M 0x0000FFFF // Data +#define CAN_IF1DA1_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1DA2 register. +// +//***************************************************************************** +#define CAN_IF1DA2_DATA_M 0x0000FFFF // Data +#define CAN_IF1DA2_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1DB1 register. +// +//***************************************************************************** +#define CAN_IF1DB1_DATA_M 0x0000FFFF // Data +#define CAN_IF1DB1_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1DB2 register. +// +//***************************************************************************** +#define CAN_IF1DB2_DATA_M 0x0000FFFF // Data +#define CAN_IF1DB2_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2CRQ register. +// +//***************************************************************************** +#define CAN_IF2CRQ_BUSY 0x00008000 // Busy Flag +#define CAN_IF2CRQ_MNUM_M 0x0000003F // Message Number +#define CAN_IF2CRQ_MNUM_RSVD 0x00000000 // 0 is not a valid message number; + // it is interpreted as 0x20, or + // object 32 +#define CAN_IF2CRQ_MNUM_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2CMSK register. +// +//***************************************************************************** +#define CAN_IF2CMSK_WRNRD 0x00000080 // Write, Not Read +#define CAN_IF2CMSK_MASK 0x00000040 // Access Mask Bits +#define CAN_IF2CMSK_ARB 0x00000020 // Access Arbitration Bits +#define CAN_IF2CMSK_CONTROL 0x00000010 // Access Control Bits +#define CAN_IF2CMSK_CLRINTPND 0x00000008 // Clear Interrupt Pending Bit +#define CAN_IF2CMSK_NEWDAT 0x00000004 // Access New Data +#define CAN_IF2CMSK_TXRQST 0x00000004 // Access Transmission Request +#define CAN_IF2CMSK_DATAA 0x00000002 // Access Data Byte 0 to 3 +#define CAN_IF2CMSK_DATAB 0x00000001 // Access Data Byte 4 to 7 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2MSK1 register. +// +//***************************************************************************** +#define CAN_IF2MSK1_IDMSK_M 0x0000FFFF // Identifier Mask +#define CAN_IF2MSK1_IDMSK_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2MSK2 register. +// +//***************************************************************************** +#define CAN_IF2MSK2_MXTD 0x00008000 // Mask Extended Identifier +#define CAN_IF2MSK2_MDIR 0x00004000 // Mask Message Direction +#define CAN_IF2MSK2_IDMSK_M 0x00001FFF // Identifier Mask +#define CAN_IF2MSK2_IDMSK_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2ARB1 register. +// +//***************************************************************************** +#define CAN_IF2ARB1_ID_M 0x0000FFFF // Message Identifier +#define CAN_IF2ARB1_ID_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2ARB2 register. +// +//***************************************************************************** +#define CAN_IF2ARB2_MSGVAL 0x00008000 // Message Valid +#define CAN_IF2ARB2_XTD 0x00004000 // Extended Identifier +#define CAN_IF2ARB2_DIR 0x00002000 // Message Direction +#define CAN_IF2ARB2_ID_M 0x00001FFF // Message Identifier +#define CAN_IF2ARB2_ID_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2MCTL register. +// +//***************************************************************************** +#define CAN_IF2MCTL_NEWDAT 0x00008000 // New Data +#define CAN_IF2MCTL_MSGLST 0x00004000 // Message Lost +#define CAN_IF2MCTL_INTPND 0x00002000 // Interrupt Pending +#define CAN_IF2MCTL_UMASK 0x00001000 // Use Acceptance Mask +#define CAN_IF2MCTL_TXIE 0x00000800 // Transmit Interrupt Enable +#define CAN_IF2MCTL_RXIE 0x00000400 // Receive Interrupt Enable +#define CAN_IF2MCTL_RMTEN 0x00000200 // Remote Enable +#define CAN_IF2MCTL_TXRQST 0x00000100 // Transmit Request +#define CAN_IF2MCTL_EOB 0x00000080 // End of Buffer +#define CAN_IF2MCTL_DLC_M 0x0000000F // Data Length Code +#define CAN_IF2MCTL_DLC_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2DA1 register. +// +//***************************************************************************** +#define CAN_IF2DA1_DATA_M 0x0000FFFF // Data +#define CAN_IF2DA1_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2DA2 register. +// +//***************************************************************************** +#define CAN_IF2DA2_DATA_M 0x0000FFFF // Data +#define CAN_IF2DA2_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2DB1 register. +// +//***************************************************************************** +#define CAN_IF2DB1_DATA_M 0x0000FFFF // Data +#define CAN_IF2DB1_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2DB2 register. +// +//***************************************************************************** +#define CAN_IF2DB2_DATA_M 0x0000FFFF // Data +#define CAN_IF2DB2_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_TXRQ1 register. +// +//***************************************************************************** +#define CAN_TXRQ1_TXRQST_M 0x0000FFFF // Transmission Request Bits +#define CAN_TXRQ1_TXRQST_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_TXRQ2 register. +// +//***************************************************************************** +#define CAN_TXRQ2_TXRQST_M 0x0000FFFF // Transmission Request Bits +#define CAN_TXRQ2_TXRQST_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_NWDA1 register. +// +//***************************************************************************** +#define CAN_NWDA1_NEWDAT_M 0x0000FFFF // New Data Bits +#define CAN_NWDA1_NEWDAT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_NWDA2 register. +// +//***************************************************************************** +#define CAN_NWDA2_NEWDAT_M 0x0000FFFF // New Data Bits +#define CAN_NWDA2_NEWDAT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_MSG1INT register. +// +//***************************************************************************** +#define CAN_MSG1INT_INTPND_M 0x0000FFFF // Interrupt Pending Bits +#define CAN_MSG1INT_INTPND_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_MSG2INT register. +// +//***************************************************************************** +#define CAN_MSG2INT_INTPND_M 0x0000FFFF // Interrupt Pending Bits +#define CAN_MSG2INT_INTPND_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_MSG1VAL register. +// +//***************************************************************************** +#define CAN_MSG1VAL_MSGVAL_M 0x0000FFFF // Message Valid Bits +#define CAN_MSG1VAL_MSGVAL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_MSG2VAL register. +// +//***************************************************************************** +#define CAN_MSG2VAL_MSGVAL_M 0x0000FFFF // Message Valid Bits +#define CAN_MSG2VAL_MSGVAL_S 0 + +//***************************************************************************** +// +// The following definitions are deprecated. +// +//***************************************************************************** +#ifndef DEPRECATED + +//***************************************************************************** +// +// The following are deprecated defines for the CAN register offsets. +// +//***************************************************************************** +#define CAN_O_MSGINT1 0x00000140 // Intr. Pending in Msg Obj 1 reg +#define CAN_O_MSGINT2 0x00000144 // Intr. Pending in Msg Obj 2 reg +#define CAN_O_MSGVAL1 0x00000160 // Message Valid in Msg Obj 1 reg +#define CAN_O_MSGVAL2 0x00000164 // Message Valid in Msg Obj 2 reg + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the CAN_O_STS +// register. +// +//***************************************************************************** +#define CAN_STS_LEC_MSK 0x00000007 // Last Error Code + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the CAN_O_ERR +// register. +// +//***************************************************************************** +#define CAN_ERR_REC_MASK 0x00007F00 // Receive error counter status +#define CAN_ERR_TEC_MASK 0x000000FF // Transmit error counter status +#define CAN_ERR_REC_SHIFT 8 // Receive error counter bit pos +#define CAN_ERR_TEC_SHIFT 0 // Transmit error counter bit pos + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the CAN_O_BIT +// register. +// +//***************************************************************************** +#define CAN_BIT_TSEG2 0x00007000 // Time segment after sample point +#define CAN_BIT_TSEG1 0x00000F00 // Time segment before sample point +#define CAN_BIT_SJW 0x000000C0 // (Re)Synchronization jump width +#define CAN_BIT_BRP 0x0000003F // Baud rate prescaler + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the CAN_O_INT +// register. +// +//***************************************************************************** +#define CAN_INT_INTID_MSK 0x0000FFFF // Interrupt Identifier + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the CAN_O_TST +// register. +// +//***************************************************************************** +#define CAN_TST_TX_MSK 0x00000060 // Overide control of CAN_TX pin + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the CAN_O_BRPE +// register. +// +//***************************************************************************** +#define CAN_BRPE_BRPE 0x0000000F // Baud rate prescaler extension + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the CAN_O_TXRQ1 +// register. +// +//***************************************************************************** +#define CAN_TXRQ1_TXRQST 0x0000FFFF // Transmission Request Bits + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the CAN_O_TXRQ2 +// register. +// +//***************************************************************************** +#define CAN_TXRQ2_TXRQST 0x0000FFFF // Transmission Request Bits + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the CAN_O_NWDA1 +// register. +// +//***************************************************************************** +#define CAN_NWDA1_NEWDATA 0x0000FFFF // New Data Bits + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the CAN_O_NWDA2 +// register. +// +//***************************************************************************** +#define CAN_NWDA2_NEWDATA 0x0000FFFF // New Data Bits + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the CAN_O_MSGINT1 +// register. +// +//***************************************************************************** +#define CAN_MSGINT1_INTPND 0x0000FFFF // Interrupt Pending Bits + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the CAN_O_MSGINT2 +// register. +// +//***************************************************************************** +#define CAN_MSGINT2_INTPND 0x0000FFFF // Interrupt Pending Bits + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the CAN_O_MSGVAL1 +// register. +// +//***************************************************************************** +#define CAN_MSGVAL1_MSGVAL 0x0000FFFF // Message Valid Bits + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the CAN_O_MSGVAL2 +// register. +// +//***************************************************************************** +#define CAN_MSGVAL2_MSGVAL 0x0000FFFF // Message Valid Bits + +//***************************************************************************** +// +// The following are deprecated defines for the reset values of the can +// registers. +// +//***************************************************************************** +#define CAN_RV_IF1MSK2 0x0000FFFF +#define CAN_RV_IF1MSK1 0x0000FFFF +#define CAN_RV_IF2MSK1 0x0000FFFF +#define CAN_RV_IF2MSK2 0x0000FFFF +#define CAN_RV_BIT 0x00002301 +#define CAN_RV_CTL 0x00000001 +#define CAN_RV_IF1CRQ 0x00000001 +#define CAN_RV_IF2CRQ 0x00000001 +#define CAN_RV_TXRQ2 0x00000000 +#define CAN_RV_IF2DB1 0x00000000 +#define CAN_RV_INT 0x00000000 +#define CAN_RV_IF1DB2 0x00000000 +#define CAN_RV_BRPE 0x00000000 +#define CAN_RV_IF2DA2 0x00000000 +#define CAN_RV_MSGVAL2 0x00000000 +#define CAN_RV_TXRQ1 0x00000000 +#define CAN_RV_IF1MCTL 0x00000000 +#define CAN_RV_IF1DB1 0x00000000 +#define CAN_RV_STS 0x00000000 +#define CAN_RV_MSGINT1 0x00000000 +#define CAN_RV_IF1DA2 0x00000000 +#define CAN_RV_TST 0x00000000 +#define CAN_RV_IF1ARB1 0x00000000 +#define CAN_RV_IF1ARB2 0x00000000 +#define CAN_RV_NWDA2 0x00000000 +#define CAN_RV_IF2CMSK 0x00000000 +#define CAN_RV_NWDA1 0x00000000 +#define CAN_RV_IF1DA1 0x00000000 +#define CAN_RV_IF2DA1 0x00000000 +#define CAN_RV_IF2MCTL 0x00000000 +#define CAN_RV_MSGVAL1 0x00000000 +#define CAN_RV_IF1CMSK 0x00000000 +#define CAN_RV_ERR 0x00000000 +#define CAN_RV_IF2ARB2 0x00000000 +#define CAN_RV_MSGINT2 0x00000000 +#define CAN_RV_IF2ARB1 0x00000000 +#define CAN_RV_IF2DB2 0x00000000 + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the CAN_IF1CRQ +// and CAN_IF1CRQ registers. +// Note: All bits may not be available in all registers. +// +//***************************************************************************** +#define CAN_IFCRQ_BUSY 0x00008000 // Busy flag status +#define CAN_IFCRQ_MNUM_MSK 0x0000003F // Message Number + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the CAN_IF1CMSK +// and CAN_IF2CMSK registers. +// Note: All bits may not be available in all registers. +// +//***************************************************************************** +#define CAN_IFCMSK_WRNRD 0x00000080 // Write, not Read +#define CAN_IFCMSK_MASK 0x00000040 // Access Mask Bits +#define CAN_IFCMSK_ARB 0x00000020 // Access Arbitration Bits +#define CAN_IFCMSK_CONTROL 0x00000010 // Access Control Bits +#define CAN_IFCMSK_CLRINTPND 0x00000008 // Clear interrupt pending Bit +#define CAN_IFCMSK_TXRQST 0x00000004 // Access Tx request bit (WRNRD=1) +#define CAN_IFCMSK_NEWDAT 0x00000004 // Access New Data bit (WRNRD=0) +#define CAN_IFCMSK_DATAA 0x00000002 // DataA access - bytes 0 to 3 +#define CAN_IFCMSK_DATAB 0x00000001 // DataB access - bytes 4 to 7 + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the CAN_IF1MSK1 +// and CAN_IF2MSK1 registers. +// Note: All bits may not be available in all registers. +// +//***************************************************************************** +#define CAN_IFMSK1_MSK 0x0000FFFF // Identifier Mask + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the CAN_IF1MSK2 +// and CAN_IF2MSK2 registers. +// Note: All bits may not be available in all registers. +// +//***************************************************************************** +#define CAN_IFMSK2_MXTD 0x00008000 // Mask extended identifier +#define CAN_IFMSK2_MDIR 0x00004000 // Mask message direction +#define CAN_IFMSK2_MSK 0x00001FFF // Mask identifier + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the CAN_IF1ARB1 +// and CAN_IF2ARB1 registers. +// Note: All bits may not be available in all registers. +// +//***************************************************************************** +#define CAN_IFARB1_ID 0x0000FFFF // Identifier + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the CAN_IF1ARB2 +// and CAN_IF2ARB2 registers. +// Note: All bits may not be available in all registers. +// +//***************************************************************************** +#define CAN_IFARB2_MSGVAL 0x00008000 // Message valid +#define CAN_IFARB2_XTD 0x00004000 // Extended identifier +#define CAN_IFARB2_DIR 0x00002000 // Message direction +#define CAN_IFARB2_ID 0x00001FFF // Message identifier + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the CAN_IF1MCTL +// and CAN_IF2MCTL registers. +// Note: All bits may not be available in all registers. +// +//***************************************************************************** +#define CAN_IFMCTL_NEWDAT 0x00008000 // New Data +#define CAN_IFMCTL_MSGLST 0x00004000 // Message lost +#define CAN_IFMCTL_INTPND 0x00002000 // Interrupt pending +#define CAN_IFMCTL_UMASK 0x00001000 // Use acceptance mask +#define CAN_IFMCTL_TXIE 0x00000800 // Transmit interrupt enable +#define CAN_IFMCTL_RXIE 0x00000400 // Receive interrupt enable +#define CAN_IFMCTL_RMTEN 0x00000200 // Remote enable +#define CAN_IFMCTL_TXRQST 0x00000100 // Transmit request +#define CAN_IFMCTL_EOB 0x00000080 // End of buffer +#define CAN_IFMCTL_DLC 0x0000000F // Data length code + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the CAN_IF1DA1 +// and CAN_IF2DA1 registers. +// Note: All bits may not be available in all registers. +// +//***************************************************************************** +#define CAN_IFDA1_DATA 0x0000FFFF // Data - bytes 1 and 0 + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the CAN_IF1DA2 +// and CAN_IF2DA2 registers. +// Note: All bits may not be available in all registers. +// +//***************************************************************************** +#define CAN_IFDA2_DATA 0x0000FFFF // Data - bytes 3 and 2 + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the CAN_IF1DB1 +// and CAN_IF2DB1 registers. +// Note: All bits may not be available in all registers. +// +//***************************************************************************** +#define CAN_IFDB1_DATA 0x0000FFFF // Data - bytes 5 and 4 + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the CAN_IF1DB2 +// and CAN_IF2DB2 registers. +// Note: All bits may not be available in all registers. +// +//***************************************************************************** +#define CAN_IFDB2_DATA 0x0000FFFF // Data - bytes 7 and 6 + +#endif + +#endif // __HW_CAN_H__ diff --git a/bsp/lm3s_9b9x/Libraries/inc/hw_comp.h b/bsp/lm3s_9b9x/Libraries/inc/hw_comp.h new file mode 100644 index 0000000000000000000000000000000000000000..34d42dbb4242ff8020114ceb73975ea7fd023b58 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/inc/hw_comp.h @@ -0,0 +1,277 @@ +//***************************************************************************** +// +// hw_comp.h - Macros used when accessing the comparator hardware. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_COMP_H__ +#define __HW_COMP_H__ + +//***************************************************************************** +// +// The following are defines for the Comparator register offsets. +// +//***************************************************************************** +#define COMP_O_ACMIS 0x00000000 // Analog Comparator Masked + // Interrupt Status +#define COMP_O_ACRIS 0x00000004 // Analog Comparator Raw Interrupt + // Status +#define COMP_O_ACINTEN 0x00000008 // Analog Comparator Interrupt + // Enable +#define COMP_O_ACREFCTL 0x00000010 // Analog Comparator Reference + // Voltage Control +#define COMP_O_ACSTAT0 0x00000020 // Analog Comparator Status 0 +#define COMP_O_ACCTL0 0x00000024 // Analog Comparator Control 0 +#define COMP_O_ACSTAT1 0x00000040 // Analog Comparator Status 1 +#define COMP_O_ACCTL1 0x00000044 // Analog Comparator Control 1 +#define COMP_O_ACSTAT2 0x00000060 // Analog Comparator Status 2 +#define COMP_O_ACCTL2 0x00000064 // Analog Comparator Control 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the COMP_O_ACMIS register. +// +//***************************************************************************** +#define COMP_ACMIS_IN2 0x00000004 // Comparator 2 Masked Interrupt + // Status +#define COMP_ACMIS_IN1 0x00000002 // Comparator 1 Masked Interrupt + // Status +#define COMP_ACMIS_IN0 0x00000001 // Comparator 0 Masked Interrupt + // Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the COMP_O_ACRIS register. +// +//***************************************************************************** +#define COMP_ACRIS_IN2 0x00000004 // Comparator 2 Interrupt Status +#define COMP_ACRIS_IN1 0x00000002 // Comparator 1 Interrupt Status +#define COMP_ACRIS_IN0 0x00000001 // Comparator 0 Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the COMP_O_ACINTEN register. +// +//***************************************************************************** +#define COMP_ACINTEN_IN2 0x00000004 // Comparator 2 Interrupt Enable +#define COMP_ACINTEN_IN1 0x00000002 // Comparator 1 Interrupt Enable +#define COMP_ACINTEN_IN0 0x00000001 // Comparator 0 Interrupt Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the COMP_O_ACREFCTL +// register. +// +//***************************************************************************** +#define COMP_ACREFCTL_EN 0x00000200 // Resistor Ladder Enable +#define COMP_ACREFCTL_RNG 0x00000100 // Resistor Ladder Range +#define COMP_ACREFCTL_VREF_M 0x0000000F // Resistor Ladder Voltage Ref +#define COMP_ACREFCTL_VREF_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the COMP_O_ACSTAT0 register. +// +//***************************************************************************** +#define COMP_ACSTAT0_OVAL 0x00000002 // Comparator Output Value + +//***************************************************************************** +// +// The following are defines for the bit fields in the COMP_O_ACCTL0 register. +// +//***************************************************************************** +#define COMP_ACCTL0_TOEN 0x00000800 // Trigger Output Enable +#define COMP_ACCTL0_ASRCP_M 0x00000600 // Analog Source Positive +#define COMP_ACCTL0_ASRCP_PIN 0x00000000 // Pin value of Cn+ +#define COMP_ACCTL0_ASRCP_PIN0 0x00000200 // Pin value of C0+ +#define COMP_ACCTL0_ASRCP_REF 0x00000400 // Internal voltage reference + // (VIREF) +#define COMP_ACCTL0_TSLVAL 0x00000080 // Trigger Sense Level Value +#define COMP_ACCTL0_TSEN_M 0x00000060 // Trigger Sense +#define COMP_ACCTL0_TSEN_LEVEL 0x00000000 // Level sense, see TSLVAL +#define COMP_ACCTL0_TSEN_FALL 0x00000020 // Falling edge +#define COMP_ACCTL0_TSEN_RISE 0x00000040 // Rising edge +#define COMP_ACCTL0_TSEN_BOTH 0x00000060 // Either edge +#define COMP_ACCTL0_ISLVAL 0x00000010 // Interrupt Sense Level Value +#define COMP_ACCTL0_ISEN_M 0x0000000C // Interrupt Sense +#define COMP_ACCTL0_ISEN_LEVEL 0x00000000 // Level sense, see ISLVAL +#define COMP_ACCTL0_ISEN_FALL 0x00000004 // Falling edge +#define COMP_ACCTL0_ISEN_RISE 0x00000008 // Rising edge +#define COMP_ACCTL0_ISEN_BOTH 0x0000000C // Either edge +#define COMP_ACCTL0_CINV 0x00000002 // Comparator Output Invert + +//***************************************************************************** +// +// The following are defines for the bit fields in the COMP_O_ACSTAT1 register. +// +//***************************************************************************** +#define COMP_ACSTAT1_OVAL 0x00000002 // Comparator Output Value + +//***************************************************************************** +// +// The following are defines for the bit fields in the COMP_O_ACCTL1 register. +// +//***************************************************************************** +#define COMP_ACCTL1_TOEN 0x00000800 // Trigger Output Enable +#define COMP_ACCTL1_ASRCP_M 0x00000600 // Analog Source Positive +#define COMP_ACCTL1_ASRCP_PIN 0x00000000 // Pin value of Cn+ +#define COMP_ACCTL1_ASRCP_PIN0 0x00000200 // Pin value of C0+ +#define COMP_ACCTL1_ASRCP_REF 0x00000400 // Internal voltage reference + // (VIREF) +#define COMP_ACCTL1_TSLVAL 0x00000080 // Trigger Sense Level Value +#define COMP_ACCTL1_TSEN_M 0x00000060 // Trigger Sense +#define COMP_ACCTL1_TSEN_LEVEL 0x00000000 // Level sense, see TSLVAL +#define COMP_ACCTL1_TSEN_FALL 0x00000020 // Falling edge +#define COMP_ACCTL1_TSEN_RISE 0x00000040 // Rising edge +#define COMP_ACCTL1_TSEN_BOTH 0x00000060 // Either edge +#define COMP_ACCTL1_ISLVAL 0x00000010 // Interrupt Sense Level Value +#define COMP_ACCTL1_ISEN_M 0x0000000C // Interrupt Sense +#define COMP_ACCTL1_ISEN_LEVEL 0x00000000 // Level sense, see ISLVAL +#define COMP_ACCTL1_ISEN_FALL 0x00000004 // Falling edge +#define COMP_ACCTL1_ISEN_RISE 0x00000008 // Rising edge +#define COMP_ACCTL1_ISEN_BOTH 0x0000000C // Either edge +#define COMP_ACCTL1_CINV 0x00000002 // Comparator Output Invert + +//***************************************************************************** +// +// The following are defines for the bit fields in the COMP_O_ACSTAT2 register. +// +//***************************************************************************** +#define COMP_ACSTAT2_OVAL 0x00000002 // Comparator Output Value + +//***************************************************************************** +// +// The following are defines for the bit fields in the COMP_O_ACCTL2 register. +// +//***************************************************************************** +#define COMP_ACCTL2_TOEN 0x00000800 // Trigger Output Enable +#define COMP_ACCTL2_ASRCP_M 0x00000600 // Analog Source Positive +#define COMP_ACCTL2_ASRCP_PIN 0x00000000 // Pin value of Cn+ +#define COMP_ACCTL2_ASRCP_PIN0 0x00000200 // Pin value of C0+ +#define COMP_ACCTL2_ASRCP_REF 0x00000400 // Internal voltage reference + // (VIREF) +#define COMP_ACCTL2_TSLVAL 0x00000080 // Trigger Sense Level Value +#define COMP_ACCTL2_TSEN_M 0x00000060 // Trigger Sense +#define COMP_ACCTL2_TSEN_LEVEL 0x00000000 // Level sense, see TSLVAL +#define COMP_ACCTL2_TSEN_FALL 0x00000020 // Falling edge +#define COMP_ACCTL2_TSEN_RISE 0x00000040 // Rising edge +#define COMP_ACCTL2_TSEN_BOTH 0x00000060 // Either edge +#define COMP_ACCTL2_ISLVAL 0x00000010 // Interrupt Sense Level Value +#define COMP_ACCTL2_ISEN_M 0x0000000C // Interrupt Sense +#define COMP_ACCTL2_ISEN_LEVEL 0x00000000 // Level sense, see ISLVAL +#define COMP_ACCTL2_ISEN_FALL 0x00000004 // Falling edge +#define COMP_ACCTL2_ISEN_RISE 0x00000008 // Rising edge +#define COMP_ACCTL2_ISEN_BOTH 0x0000000C // Either edge +#define COMP_ACCTL2_CINV 0x00000002 // Comparator Output Invert + +//***************************************************************************** +// +// The following definitions are deprecated. +// +//***************************************************************************** +#ifndef DEPRECATED + +//***************************************************************************** +// +// The following are deprecated defines for the Comparator register offsets. +// +//***************************************************************************** +#define COMP_O_MIS 0x00000000 // Interrupt status register +#define COMP_O_RIS 0x00000004 // Raw interrupt status register +#define COMP_O_INTEN 0x00000008 // Interrupt enable register +#define COMP_O_REFCTL 0x00000010 // Reference voltage control reg + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the COMP_O_REFCTL +// register. +// +//***************************************************************************** +#define COMP_REFCTL_EN 0x00000200 // Reference voltage enable +#define COMP_REFCTL_RNG 0x00000100 // Reference voltage range +#define COMP_REFCTL_VREF_MASK 0x0000000F // Reference voltage select mask +#define COMP_REFCTL_VREF_SHIFT 0 + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the COMP_MIS, +// COMP_RIS, and COMP_INTEN registers. +// +//***************************************************************************** +#define COMP_INT_2 0x00000004 // Comp2 interrupt +#define COMP_INT_1 0x00000002 // Comp1 interrupt +#define COMP_INT_0 0x00000001 // Comp0 interrupt + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the COMP_ACSTAT0, +// COMP_ACSTAT1, and COMP_ACSTAT2 registers. +// +//***************************************************************************** +#define COMP_ACSTAT_OVAL 0x00000002 // Comparator output value + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the COMP_ACCTL0, +// COMP_ACCTL1, and COMP_ACCTL2 registers. +// +//***************************************************************************** +#define COMP_ACCTL_TMASK 0x00000800 // Trigger enable +#define COMP_ACCTL_ASRCP_MASK 0x00000600 // Vin+ source select mask +#define COMP_ACCTL_ASRCP_PIN 0x00000000 // Dedicated Comp+ pin +#define COMP_ACCTL_ASRCP_PIN0 0x00000200 // Comp0+ pin +#define COMP_ACCTL_ASRCP_REF 0x00000400 // Internal voltage reference +#define COMP_ACCTL_ASRCP_RES 0x00000600 // Reserved +#define COMP_ACCTL_OEN 0x00000100 // Comparator output enable +#define COMP_ACCTL_TSVAL 0x00000080 // Trigger polarity select +#define COMP_ACCTL_TSEN_MASK 0x00000060 // Trigger sense mask +#define COMP_ACCTL_TSEN_LEVEL 0x00000000 // Trigger is level sense +#define COMP_ACCTL_TSEN_FALL 0x00000020 // Trigger is falling edge +#define COMP_ACCTL_TSEN_RISE 0x00000040 // Trigger is rising edge +#define COMP_ACCTL_TSEN_BOTH 0x00000060 // Trigger is both edges +#define COMP_ACCTL_ISLVAL 0x00000010 // Interrupt polarity select +#define COMP_ACCTL_ISEN_MASK 0x0000000C // Interrupt sense mask +#define COMP_ACCTL_ISEN_LEVEL 0x00000000 // Interrupt is level sense +#define COMP_ACCTL_ISEN_FALL 0x00000004 // Interrupt is falling edge +#define COMP_ACCTL_ISEN_RISE 0x00000008 // Interrupt is rising edge +#define COMP_ACCTL_ISEN_BOTH 0x0000000C // Interrupt is both edges +#define COMP_ACCTL_CINV 0x00000002 // Comparator output invert + +//***************************************************************************** +// +// The following are deprecated defines for the reset values for the comparator +// registers. +// +//***************************************************************************** +#define COMP_RV_ACCTL1 0x00000000 // Comp1 control register +#define COMP_RV_ACSTAT2 0x00000000 // Comp2 status register +#define COMP_RV_ACSTAT0 0x00000000 // Comp0 status register +#define COMP_RV_RIS 0x00000000 // Raw interrupt status register +#define COMP_RV_INTEN 0x00000000 // Interrupt enable register +#define COMP_RV_ACCTL2 0x00000000 // Comp2 control register +#define COMP_RV_MIS 0x00000000 // Interrupt status register +#define COMP_RV_ACCTL0 0x00000000 // Comp0 control register +#define COMP_RV_ACSTAT1 0x00000000 // Comp1 status register +#define COMP_RV_REFCTL 0x00000000 // Reference voltage control reg + +#endif + +#endif // __HW_COMP_H__ diff --git a/bsp/lm3s_9b9x/Libraries/inc/hw_epi.h b/bsp/lm3s_9b9x/Libraries/inc/hw_epi.h new file mode 100644 index 0000000000000000000000000000000000000000..c434b846221fcbd638737b172b6238c03543e725 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/inc/hw_epi.h @@ -0,0 +1,499 @@ +//***************************************************************************** +// +// hw_epi.h - Macros for use in accessing the EPI registers. +// +// Copyright (c) 2008-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_EPI_H__ +#define __HW_EPI_H__ + +//***************************************************************************** +// +// The following are defines for the External Peripheral Interface register +// offsets. +// +//***************************************************************************** +#define EPI_O_CFG 0x00000000 // EPI Configuration +#define EPI_O_BAUD 0x00000004 // EPI Main Baud Rate +#define EPI_O_HB16CFG 0x00000010 // EPI Host-Bus 16 Configuration +#define EPI_O_GPCFG 0x00000010 // EPI General-Purpose + // Configuration +#define EPI_O_SDRAMCFG 0x00000010 // EPI SDRAM Configuration +#define EPI_O_HB8CFG 0x00000010 // EPI Host-Bus 8 Configuration +#define EPI_O_HB8CFG2 0x00000014 // EPI Host-Bus 8 Configuration 2 +#define EPI_O_HB16CFG2 0x00000014 // EPI Host-Bus 16 Configuration 2 +#define EPI_O_GPCFG2 0x00000014 // EPI General-Purpose + // Configuration 2 +#define EPI_O_ADDRMAP 0x0000001C // EPI Address Map +#define EPI_O_RSIZE0 0x00000020 // EPI Read Size 0 +#define EPI_O_RADDR0 0x00000024 // EPI Read Address 0 +#define EPI_O_RPSTD0 0x00000028 // EPI Non-Blocking Read Data 0 +#define EPI_O_RSIZE1 0x00000030 // EPI Read Size 1 +#define EPI_O_RADDR1 0x00000034 // EPI Read Address 1 +#define EPI_O_RPSTD1 0x00000038 // EPI Non-Blocking Read Data 1 +#define EPI_O_STAT 0x00000060 // EPI Status +#define EPI_O_RFIFOCNT 0x0000006C // EPI Read FIFO Count +#define EPI_O_READFIFO 0x00000070 // EPI Read FIFO +#define EPI_O_READFIFO1 0x00000074 // EPI Read FIFO Alias 1 +#define EPI_O_READFIFO2 0x00000078 // EPI Read FIFO Alias 2 +#define EPI_O_READFIFO3 0x0000007C // EPI Read FIFO Alias 3 +#define EPI_O_READFIFO4 0x00000080 // EPI Read FIFO Alias 4 +#define EPI_O_READFIFO5 0x00000084 // EPI Read FIFO Alias 5 +#define EPI_O_READFIFO6 0x00000088 // EPI Read FIFO Alias 6 +#define EPI_O_READFIFO7 0x0000008C // EPI Read FIFO Alias 7 +#define EPI_O_FIFOLVL 0x00000200 // EPI FIFO Level Selects +#define EPI_O_WFIFOCNT 0x00000204 // EPI Write FIFO Count +#define EPI_O_IM 0x00000210 // EPI Interrupt Mask +#define EPI_O_RIS 0x00000214 // EPI Raw Interrupt Status +#define EPI_O_MIS 0x00000218 // EPI Masked Interrupt Status +#define EPI_O_EISC 0x0000021C // EPI Error Interrupt Status and + // Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_CFG register. +// +//***************************************************************************** +#define EPI_CFG_BLKEN 0x00000010 // Block Enable +#define EPI_CFG_MODE_M 0x0000000F // Mode Select +#define EPI_CFG_MODE_NONE 0x00000000 // General Purpose +#define EPI_CFG_MODE_SDRAM 0x00000001 // SDRAM +#define EPI_CFG_MODE_HB8 0x00000002 // 8-Bit Host-Bus (HB8) +#define EPI_CFG_MODE_HB16 0x00000003 // 16-Bit Host-Bus (HB16) + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_BAUD register. +// +//***************************************************************************** +#define EPI_BAUD_COUNT1_M 0xFFFF0000 // Baud Rate Counter 1 +#define EPI_BAUD_COUNT0_M 0x0000FFFF // Baud Rate Counter 0 +#define EPI_BAUD_COUNT1_S 16 +#define EPI_BAUD_COUNT0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_HB16CFG register. +// +//***************************************************************************** +#define EPI_HB16CFG_XFFEN 0x00800000 // External FIFO FULL Enable +#define EPI_HB16CFG_XFEEN 0x00400000 // External FIFO EMPTY Enable +#define EPI_HB16CFG_WRHIGH 0x00200000 // WRITE Strobe Polarity +#define EPI_HB16CFG_RDHIGH 0x00100000 // READ Strobe Polarity +#define EPI_HB16CFG_MAXWAIT_M 0x0000FF00 // Maximum Wait +#define EPI_HB16CFG_WRWS_M 0x000000C0 // CS0n Write Wait States +#define EPI_HB16CFG_WRWS_0 0x00000000 // No wait states +#define EPI_HB16CFG_WRWS_1 0x00000040 // 1 wait state +#define EPI_HB16CFG_WRWS_2 0x00000080 // 2 wait states +#define EPI_HB16CFG_WRWS_3 0x000000C0 // 3 wait states +#define EPI_HB16CFG_RDWS_M 0x00000030 // CS0n Read Wait States +#define EPI_HB16CFG_RDWS_0 0x00000000 // No wait states +#define EPI_HB16CFG_RDWS_1 0x00000010 // 1 wait state +#define EPI_HB16CFG_RDWS_2 0x00000020 // 2 wait states +#define EPI_HB16CFG_RDWS_3 0x00000030 // 3 wait states +#define EPI_HB16CFG_BSEL 0x00000004 // Byte Select Configuration +#define EPI_HB16CFG_MODE_M 0x00000003 // Host Bus Sub-Mode +#define EPI_HB16CFG_MODE_ADMUX 0x00000000 // ADMUX - AD[15:0] +#define EPI_HB16CFG_MODE_ADNMUX 0x00000001 // ADNONMUX - D[15:0] +#define EPI_HB16CFG_MODE_SRAM 0x00000002 // Continuous Read - D[15:0] +#define EPI_HB16CFG_MODE_XFIFO 0x00000003 // XFIFO - D[15:0] +#define EPI_HB16CFG_MAXWAIT_S 8 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_GPCFG register. +// +//***************************************************************************** +#define EPI_GPCFG_CLKPIN 0x80000000 // Clock Pin +#define EPI_GPCFG_CLKGATE 0x40000000 // Clock Gated +#define EPI_GPCFG_RDYEN 0x10000000 // Ready Enable +#define EPI_GPCFG_FRMPIN 0x08000000 // Framing Pin +#define EPI_GPCFG_FRM50 0x04000000 // 50/50 Frame +#define EPI_GPCFG_FRMCNT_M 0x03C00000 // Frame Count +#define EPI_GPCFG_RW 0x00200000 // Read and Write +#define EPI_GPCFG_WR2CYC 0x00080000 // 2-Cycle Writes +#define EPI_GPCFG_RD2CYC 0x00040000 // 2-Cycle Reads +#define EPI_GPCFG_MAXWAIT_M 0x0000FF00 // Maximum Wait +#define EPI_GPCFG_ASIZE_M 0x00000030 // Address Bus Size +#define EPI_GPCFG_ASIZE_NONE 0x00000000 // No address +#define EPI_GPCFG_ASIZE_4BIT 0x00000010 // Up to 4 bits wide +#define EPI_GPCFG_ASIZE_12BIT 0x00000020 // Up to 12 bits wide. This size + // cannot be used with 24-bit data +#define EPI_GPCFG_ASIZE_20BIT 0x00000030 // Up to 20 bits wide. This size + // cannot be used with data sizes + // other than 8 +#define EPI_GPCFG_DSIZE_M 0x00000003 // Size of Data Bus +#define EPI_GPCFG_DSIZE_4BIT 0x00000000 // 8 Bits Wide (EPI0S0 to EPI0S7) +#define EPI_GPCFG_DSIZE_16BIT 0x00000001 // 16 Bits Wide (EPI0S0 to EPI0S15) +#define EPI_GPCFG_DSIZE_24BIT 0x00000002 // 24 Bits Wide (EPI0S0 to EPI0S23) +#define EPI_GPCFG_DSIZE_32BIT 0x00000003 // 32 Bits Wide (EPI0S0 to EPI0S31) +#define EPI_GPCFG_FRMCNT_S 22 +#define EPI_GPCFG_MAXWAIT_S 8 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_SDRAMCFG register. +// +//***************************************************************************** +#define EPI_SDRAMCFG_FREQ_M 0xC0000000 // Frequency Range +#define EPI_SDRAMCFG_FREQ_NONE 0x00000000 // 0 - 15 MHz +#define EPI_SDRAMCFG_FREQ_15MHZ 0x40000000 // 15 - 30 MHz +#define EPI_SDRAMCFG_FREQ_30MHZ 0x80000000 // 30 - 50 MHz +#define EPI_SDRAMCFG_FREQ_50MHZ 0xC0000000 // 50 - 100 MHz +#define EPI_SDRAMCFG_RFSH_M 0x07FF0000 // Refresh Counter +#define EPI_SDRAMCFG_SLEEP 0x00000200 // Sleep Mode +#define EPI_SDRAMCFG_SIZE_M 0x00000003 // Size of SDRAM +#define EPI_SDRAMCFG_SIZE_8MB 0x00000000 // 64 megabits (8MB) +#define EPI_SDRAMCFG_SIZE_16MB 0x00000001 // 128 megabits (16MB) +#define EPI_SDRAMCFG_SIZE_32MB 0x00000002 // 256 megabits (32MB) +#define EPI_SDRAMCFG_SIZE_64MB 0x00000003 // 512 megabits (64MB) +#define EPI_SDRAMCFG_RFSH_S 16 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_HB8CFG register. +// +//***************************************************************************** +#define EPI_HB8CFG_XFFEN 0x00800000 // External FIFO FULL Enable +#define EPI_HB8CFG_XFEEN 0x00400000 // External FIFO EMPTY Enable +#define EPI_HB8CFG_WRHIGH 0x00200000 // CS0n WRITE Strobe Polarity +#define EPI_HB8CFG_RDHIGH 0x00100000 // CS0n READ Strobe Polarity +#define EPI_HB8CFG_MAXWAIT_M 0x0000FF00 // Maximum Wait +#define EPI_HB8CFG_WRWS_M 0x000000C0 // Write Wait States +#define EPI_HB8CFG_WRWS_0 0x00000000 // No wait states +#define EPI_HB8CFG_WRWS_1 0x00000040 // 1 wait state +#define EPI_HB8CFG_WRWS_2 0x00000080 // 2 wait states +#define EPI_HB8CFG_WRWS_3 0x000000C0 // 3 wait states +#define EPI_HB8CFG_RDWS_M 0x00000030 // Read Wait States +#define EPI_HB8CFG_RDWS_0 0x00000000 // No wait states +#define EPI_HB8CFG_RDWS_1 0x00000010 // 1 wait state +#define EPI_HB8CFG_RDWS_2 0x00000020 // 2 wait states +#define EPI_HB8CFG_RDWS_3 0x00000030 // 3 wait states +#define EPI_HB8CFG_MODE_M 0x00000003 // Host Bus Sub-Mode +#define EPI_HB8CFG_MODE_MUX 0x00000000 // ADMUX - AD[7:0] +#define EPI_HB8CFG_MODE_NMUX 0x00000001 // ADNONMUX - D[7:0] +#define EPI_HB8CFG_MODE_SRAM 0x00000002 // Continuous Read - D[7:0] +#define EPI_HB8CFG_MODE_FIFO 0x00000003 // XFIFO - D[7:0] +#define EPI_HB8CFG_MAXWAIT_S 8 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_HB8CFG2 register. +// +//***************************************************************************** +#define EPI_HB8CFG2_WORD 0x80000000 // Word Access Mode +#define EPI_HB8CFG2_CSBAUD 0x04000000 // Chip Select Baud Rate +#define EPI_HB8CFG2_CSCFG_M 0x03000000 // Chip Select Configuration +#define EPI_HB8CFG2_CSCFG_ALE 0x00000000 // ALE Configuration +#define EPI_HB8CFG2_CSCFG_CS 0x01000000 // CSn Configuration +#define EPI_HB8CFG2_CSCFG_DCS 0x02000000 // Dual CSn Configuration +#define EPI_HB8CFG2_CSCFG_ADCS 0x03000000 // ALE with Dual CSn Configuration + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_HB16CFG2 register. +// +//***************************************************************************** +#define EPI_HB16CFG2_WORD 0x80000000 // Word Access Mode +#define EPI_HB16CFG2_CSBAUD 0x04000000 // Chip Select Baud Rate +#define EPI_HB16CFG2_CSCFG_M 0x03000000 // Chip Select Configuration +#define EPI_HB16CFG2_CSCFG_ALE 0x00000000 // ALE Configuration +#define EPI_HB16CFG2_CSCFG_CS 0x01000000 // CSn Configuration +#define EPI_HB16CFG2_CSCFG_DCS 0x02000000 // Dual CSn Configuration +#define EPI_HB16CFG2_CSCFG_ADCS 0x03000000 // ALE with Dual CSn Configuration + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_GPCFG2 register. +// +//***************************************************************************** +#define EPI_GPCFG2_WORD 0x80000000 // Word Access Mode + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_ADDRMAP register. +// +//***************************************************************************** +#define EPI_ADDRMAP_EPSZ_M 0x000000C0 // External Peripheral Size +#define EPI_ADDRMAP_EPSZ_256B 0x00000000 // 256 bytes; lower address range: + // 0x00 to 0xFF +#define EPI_ADDRMAP_EPSZ_64KB 0x00000040 // 64 KB; lower address range: + // 0x0000 to 0xFFFF +#define EPI_ADDRMAP_EPSZ_16MB 0x00000080 // 16 MB; lower address range: + // 0x00.0000 to 0xFF.FFFF +#define EPI_ADDRMAP_EPSZ_256MB 0x000000C0 // 256 MB; lower address range: + // 0x000.0000 to 0xFFF.FFFF +#define EPI_ADDRMAP_EPADR_M 0x00000030 // External Peripheral Address +#define EPI_ADDRMAP_EPADR_NONE 0x00000000 // Not mapped +#define EPI_ADDRMAP_EPADR_A000 0x00000010 // At 0xA000.0000 +#define EPI_ADDRMAP_EPADR_C000 0x00000020 // At 0xC000.0000 +#define EPI_ADDRMAP_ERSZ_M 0x0000000C // External RAM Size +#define EPI_ADDRMAP_ERSZ_256B 0x00000000 // 256 bytes; lower address range: + // 0x00 to 0xFF +#define EPI_ADDRMAP_ERSZ_64KB 0x00000004 // 64 KB; lower address range: + // 0x0000 to 0xFFFF +#define EPI_ADDRMAP_ERSZ_16MB 0x00000008 // 16 MB; lower address range: + // 0x00.0000 to 0xFF.FFFF +#define EPI_ADDRMAP_ERSZ_256MB 0x0000000C // 256 MB; lower address range: + // 0x000.0000 to 0xFFF.FFFF +#define EPI_ADDRMAP_ERADR_M 0x00000003 // External RAM Address +#define EPI_ADDRMAP_ERADR_NONE 0x00000000 // Not mapped +#define EPI_ADDRMAP_ERADR_6000 0x00000001 // At 0x6000.0000 +#define EPI_ADDRMAP_ERADR_8000 0x00000002 // At 0x8000.0000 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_RSIZE0 register. +// +//***************************************************************************** +#define EPI_RSIZE0_SIZE_M 0x00000003 // Current Size +#define EPI_RSIZE0_SIZE_8BIT 0x00000001 // Byte (8 bits) +#define EPI_RSIZE0_SIZE_16BIT 0x00000002 // Half-word (16 bits) +#define EPI_RSIZE0_SIZE_32BIT 0x00000003 // Word (32 bits) + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_RADDR0 register. +// +//***************************************************************************** +#define EPI_RADDR0_ADDR_M 0x1FFFFFFF // Current Address +#define EPI_RADDR0_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_RPSTD0 register. +// +//***************************************************************************** +#define EPI_RPSTD0_POSTCNT_M 0x00001FFF // Post Count +#define EPI_RPSTD0_POSTCNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_RSIZE1 register. +// +//***************************************************************************** +#define EPI_RSIZE1_SIZE_M 0x00000003 // Current Size +#define EPI_RSIZE1_SIZE_8BIT 0x00000001 // Byte (8 bits) +#define EPI_RSIZE1_SIZE_16BIT 0x00000002 // Half-word (16 bits) +#define EPI_RSIZE1_SIZE_32BIT 0x00000003 // Word (32 bits) + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_RADDR1 register. +// +//***************************************************************************** +#define EPI_RADDR1_ADDR_M 0x1FFFFFFF // Current Address +#define EPI_RADDR1_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_RPSTD1 register. +// +//***************************************************************************** +#define EPI_RPSTD1_POSTCNT_M 0x00001FFF // Post Count +#define EPI_RPSTD1_POSTCNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_STAT register. +// +//***************************************************************************** +#define EPI_STAT_CELOW 0x00000200 // Clock Enable Low +#define EPI_STAT_XFFULL 0x00000100 // External FIFO Full +#define EPI_STAT_XFEMPTY 0x00000080 // External FIFO Empty +#define EPI_STAT_INITSEQ 0x00000040 // Initialization Sequence +#define EPI_STAT_WBUSY 0x00000020 // Write Busy +#define EPI_STAT_NBRBUSY 0x00000010 // Non-Blocking Read Busy +#define EPI_STAT_ACTIVE 0x00000001 // Register Active + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_RFIFOCNT register. +// +//***************************************************************************** +#define EPI_RFIFOCNT_COUNT_M 0x00000007 // FIFO Count +#define EPI_RFIFOCNT_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_READFIFO register. +// +//***************************************************************************** +#define EPI_READFIFO_DATA_M 0xFFFFFFFF // Reads Data +#define EPI_READFIFO_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_READFIFO1 +// register. +// +//***************************************************************************** +#define EPI_READFIFO1_DATA_M 0xFFFFFFFF // Reads Data +#define EPI_READFIFO1_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_READFIFO2 +// register. +// +//***************************************************************************** +#define EPI_READFIFO2_DATA_M 0xFFFFFFFF // Reads Data +#define EPI_READFIFO2_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_READFIFO3 +// register. +// +//***************************************************************************** +#define EPI_READFIFO3_DATA_M 0xFFFFFFFF // Reads Data +#define EPI_READFIFO3_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_READFIFO4 +// register. +// +//***************************************************************************** +#define EPI_READFIFO4_DATA_M 0xFFFFFFFF // Reads Data +#define EPI_READFIFO4_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_READFIFO5 +// register. +// +//***************************************************************************** +#define EPI_READFIFO5_DATA_M 0xFFFFFFFF // Reads Data +#define EPI_READFIFO5_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_READFIFO6 +// register. +// +//***************************************************************************** +#define EPI_READFIFO6_DATA_M 0xFFFFFFFF // Reads Data +#define EPI_READFIFO6_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_READFIFO7 +// register. +// +//***************************************************************************** +#define EPI_READFIFO7_DATA_M 0xFFFFFFFF // Reads Data +#define EPI_READFIFO7_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_FIFOLVL register. +// +//***************************************************************************** +#define EPI_FIFOLVL_WFERR 0x00020000 // Write Full Error +#define EPI_FIFOLVL_RSERR 0x00010000 // Read Stall Error +#define EPI_FIFOLVL_WRFIFO_M 0x00000070 // Write FIFO +#define EPI_FIFOLVL_WRFIFO_EMPT 0x00000000 // Trigger when there are 1 to 4 + // spaces available in the WFIFO +#define EPI_FIFOLVL_WRFIFO_1_4 0x00000020 // Trigger when there are 1 to 3 + // spaces available in the WFIFO +#define EPI_FIFOLVL_WRFIFO_1_2 0x00000030 // Trigger when there are 1 to 2 + // spaces available in the WFIFO +#define EPI_FIFOLVL_WRFIFO_3_4 0x00000040 // Trigger when there is 1 space + // available in the WFIFO +#define EPI_FIFOLVL_RDFIFO_M 0x00000007 // Read FIFO +#define EPI_FIFOLVL_RDFIFO_EMPT 0x00000000 // Empty +#define EPI_FIFOLVL_RDFIFO_1_8 0x00000001 // Trigger when there are 1 or more + // entries in the NBRFIFO +#define EPI_FIFOLVL_RDFIFO_1_4 0x00000002 // Trigger when there are 2 or more + // entries in the NBRFIFO +#define EPI_FIFOLVL_RDFIFO_1_2 0x00000003 // Trigger when there are 4 or more + // entries in the NBRFIFO +#define EPI_FIFOLVL_RDFIFO_3_4 0x00000004 // Trigger when there are 6 or more + // entries in the NBRFIFO +#define EPI_FIFOLVL_RDFIFO_7_8 0x00000005 // Trigger when there are 7 or more + // entries in the NBRFIFO +#define EPI_FIFOLVL_RDFIFO_FULL 0x00000006 // Trigger when there are 8 entries + // in the NBRFIFO + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_WFIFOCNT register. +// +//***************************************************************************** +#define EPI_WFIFOCNT_WTAV_M 0x00000007 // Available Write Transactions +#define EPI_WFIFOCNT_WTAV_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_IM register. +// +//***************************************************************************** +#define EPI_IM_WRIM 0x00000004 // Write Interrupt Mask +#define EPI_IM_RDIM 0x00000002 // Read Interrupt Mask +#define EPI_IM_ERRIM 0x00000001 // Error Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_RIS register. +// +//***************************************************************************** +#define EPI_RIS_WRRIS 0x00000004 // Write Raw Interrupt Status +#define EPI_RIS_RDRIS 0x00000002 // Read Raw Interrupt Status +#define EPI_RIS_ERRRIS 0x00000001 // Error Raw Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_MIS register. +// +//***************************************************************************** +#define EPI_MIS_WRMIS 0x00000004 // Write Masked Interrupt Status +#define EPI_MIS_RDMIS 0x00000002 // Read Masked Interrupt Status +#define EPI_MIS_ERRMIS 0x00000001 // Error Masked Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_EISC register. +// +//***************************************************************************** +#define EPI_EISC_WTFULL 0x00000004 // Write FIFO Full Error +#define EPI_EISC_RSTALL 0x00000002 // Read Stalled Error +#define EPI_EISC_TOUT 0x00000001 // Timeout Error + +//***************************************************************************** +// +// The following definitions are deprecated. +// +//***************************************************************************** +#ifndef DEPRECATED + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the EPI_O_BAUD +// register. +// +//***************************************************************************** +#define EPI_BAUD_COUNT_M 0x0000FFFF // Baud Rate Counter +#define EPI_BAUD_COUNT_S 0 + +#endif + +#endif // __HW_EPI_H__ diff --git a/bsp/lm3s_9b9x/Libraries/inc/hw_ethernet.h b/bsp/lm3s_9b9x/Libraries/inc/hw_ethernet.h new file mode 100644 index 0000000000000000000000000000000000000000..80ba508547cf44de9b6cdb2ea37a0403baae80f1 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/inc/hw_ethernet.h @@ -0,0 +1,679 @@ +//***************************************************************************** +// +// hw_ethernet.h - Macros used when accessing the Ethernet hardware. +// +// Copyright (c) 2006-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_ETHERNET_H__ +#define __HW_ETHERNET_H__ + +//***************************************************************************** +// +// The following are defines for the Ethernet MAC register offsets. +// +//***************************************************************************** +#define MAC_O_RIS 0x00000000 // Ethernet MAC Raw Interrupt + // Status/Acknowledge +#define MAC_O_IACK 0x00000000 // Ethernet MAC Raw Interrupt + // Status/Acknowledge +#define MAC_O_IM 0x00000004 // Ethernet MAC Interrupt Mask +#define MAC_O_RCTL 0x00000008 // Ethernet MAC Receive Control +#define MAC_O_TCTL 0x0000000C // Ethernet MAC Transmit Control +#define MAC_O_DATA 0x00000010 // Ethernet MAC Data +#define MAC_O_IA0 0x00000014 // Ethernet MAC Individual Address + // 0 +#define MAC_O_IA1 0x00000018 // Ethernet MAC Individual Address + // 1 +#define MAC_O_THR 0x0000001C // Ethernet MAC Threshold +#define MAC_O_MCTL 0x00000020 // Ethernet MAC Management Control +#define MAC_O_MDV 0x00000024 // Ethernet MAC Management Divider +#define MAC_O_MTXD 0x0000002C // Ethernet MAC Management Transmit + // Data +#define MAC_O_MRXD 0x00000030 // Ethernet MAC Management Receive + // Data +#define MAC_O_NP 0x00000034 // Ethernet MAC Number of Packets +#define MAC_O_TR 0x00000038 // Ethernet MAC Transmission + // Request +#define MAC_O_TS 0x0000003C // Ethernet MAC Timer Support +#define MAC_O_LED 0x00000040 // Ethernet MAC LED Encoding +#define MAC_O_MDIX 0x00000044 // Ethernet PHY MDIX + +//***************************************************************************** +// +// The following are defines for the bit fields in the MAC_O_RIS register. +// +//***************************************************************************** +#define MAC_RIS_PHYINT 0x00000040 // PHY Interrupt +#define MAC_RIS_MDINT 0x00000020 // MII Transaction Complete +#define MAC_RIS_RXER 0x00000010 // Receive Error +#define MAC_RIS_FOV 0x00000008 // FIFO Overrun +#define MAC_RIS_TXEMP 0x00000004 // Transmit FIFO Empty +#define MAC_RIS_TXER 0x00000002 // Transmit Error +#define MAC_RIS_RXINT 0x00000001 // Packet Received + +//***************************************************************************** +// +// The following are defines for the bit fields in the MAC_O_IACK register. +// +//***************************************************************************** +#define MAC_IACK_PHYINT 0x00000040 // Clear PHY Interrupt +#define MAC_IACK_MDINT 0x00000020 // Clear MII Transaction Complete +#define MAC_IACK_RXER 0x00000010 // Clear Receive Error +#define MAC_IACK_FOV 0x00000008 // Clear FIFO Overrun +#define MAC_IACK_TXEMP 0x00000004 // Clear Transmit FIFO Empty +#define MAC_IACK_TXER 0x00000002 // Clear Transmit Error +#define MAC_IACK_RXINT 0x00000001 // Clear Packet Received + +//***************************************************************************** +// +// The following are defines for the bit fields in the MAC_O_IM register. +// +//***************************************************************************** +#define MAC_IM_PHYINTM 0x00000040 // Mask PHY Interrupt +#define MAC_IM_MDINTM 0x00000020 // Mask MII Transaction Complete +#define MAC_IM_RXERM 0x00000010 // Mask Receive Error +#define MAC_IM_FOVM 0x00000008 // Mask FIFO Overrun +#define MAC_IM_TXEMPM 0x00000004 // Mask Transmit FIFO Empty +#define MAC_IM_TXERM 0x00000002 // Mask Transmit Error +#define MAC_IM_RXINTM 0x00000001 // Mask Packet Received + +//***************************************************************************** +// +// The following are defines for the bit fields in the MAC_O_RCTL register. +// +//***************************************************************************** +#define MAC_RCTL_RSTFIFO 0x00000010 // Clear Receive FIFO +#define MAC_RCTL_BADCRC 0x00000008 // Enable Reject Bad CRC +#define MAC_RCTL_PRMS 0x00000004 // Enable Promiscuous Mode +#define MAC_RCTL_AMUL 0x00000002 // Enable Multicast Frames +#define MAC_RCTL_RXEN 0x00000001 // Enable Receiver + +//***************************************************************************** +// +// The following are defines for the bit fields in the MAC_O_TCTL register. +// +//***************************************************************************** +#define MAC_TCTL_DUPLEX 0x00000010 // Enable Duplex Mode +#define MAC_TCTL_CRC 0x00000004 // Enable CRC Generation +#define MAC_TCTL_PADEN 0x00000002 // Enable Packet Padding +#define MAC_TCTL_TXEN 0x00000001 // Enable Transmitter + +//***************************************************************************** +// +// The following are defines for the bit fields in the MAC_O_DATA register. +// +//***************************************************************************** +#define MAC_DATA_TXDATA_M 0xFFFFFFFF // Transmit FIFO Data +#define MAC_DATA_RXDATA_M 0xFFFFFFFF // Receive FIFO Data +#define MAC_DATA_RXDATA_S 0 +#define MAC_DATA_TXDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the MAC_O_IA0 register. +// +//***************************************************************************** +#define MAC_IA0_MACOCT4_M 0xFF000000 // MAC Address Octet 4 +#define MAC_IA0_MACOCT3_M 0x00FF0000 // MAC Address Octet 3 +#define MAC_IA0_MACOCT2_M 0x0000FF00 // MAC Address Octet 2 +#define MAC_IA0_MACOCT1_M 0x000000FF // MAC Address Octet 1 +#define MAC_IA0_MACOCT4_S 24 +#define MAC_IA0_MACOCT3_S 16 +#define MAC_IA0_MACOCT2_S 8 +#define MAC_IA0_MACOCT1_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the MAC_O_IA1 register. +// +//***************************************************************************** +#define MAC_IA1_MACOCT6_M 0x0000FF00 // MAC Address Octet 6 +#define MAC_IA1_MACOCT5_M 0x000000FF // MAC Address Octet 5 +#define MAC_IA1_MACOCT6_S 8 +#define MAC_IA1_MACOCT5_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the MAC_O_THR register. +// +//***************************************************************************** +#define MAC_THR_THRESH_M 0x0000003F // Threshold Value +#define MAC_THR_THRESH_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the MAC_O_MCTL register. +// +//***************************************************************************** +#define MAC_MCTL_REGADR_M 0x000000F8 // MII Register Address +#define MAC_MCTL_WRITE 0x00000002 // MII Register Transaction Type +#define MAC_MCTL_START 0x00000001 // MII Register Transaction Enable +#define MAC_MCTL_REGADR_S 3 + +//***************************************************************************** +// +// The following are defines for the bit fields in the MAC_O_MDV register. +// +//***************************************************************************** +#define MAC_MDV_DIV_M 0x000000FF // Clock Divider +#define MAC_MDV_DIV_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the MAC_O_MTXD register. +// +//***************************************************************************** +#define MAC_MTXD_MDTX_M 0x0000FFFF // MII Register Transmit Data +#define MAC_MTXD_MDTX_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the MAC_O_MRXD register. +// +//***************************************************************************** +#define MAC_MRXD_MDRX_M 0x0000FFFF // MII Register Receive Data +#define MAC_MRXD_MDRX_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the MAC_O_NP register. +// +//***************************************************************************** +#define MAC_NP_NPR_M 0x0000003F // Number of Packets in Receive + // FIFO +#define MAC_NP_NPR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the MAC_O_TR register. +// +//***************************************************************************** +#define MAC_TR_NEWTX 0x00000001 // New Transmission + +//***************************************************************************** +// +// The following are defines for the bit fields in the MAC_O_TS register. +// +//***************************************************************************** +#define MAC_TS_TSEN 0x00000001 // Time Stamp Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the MAC_O_LED register. +// +//***************************************************************************** +#define MAC_LED_LED1_M 0x00000F00 // LED1 Source +#define MAC_LED_LED1_LINK 0x00000000 // Link OK +#define MAC_LED_LED1_RXTX 0x00000100 // RX or TX Activity (Default LED1) +#define MAC_LED_LED1_100 0x00000500 // 100BASE-TX mode +#define MAC_LED_LED1_10 0x00000600 // 10BASE-T mode +#define MAC_LED_LED1_DUPLEX 0x00000700 // Full-Duplex +#define MAC_LED_LED1_LINKACT 0x00000800 // Link OK & Blink=RX or TX + // Activity +#define MAC_LED_LED0_M 0x0000000F // LED0 Source +#define MAC_LED_LED0_LINK 0x00000000 // Link OK (Default LED0) +#define MAC_LED_LED0_RXTX 0x00000001 // RX or TX Activity +#define MAC_LED_LED0_100 0x00000005 // 100BASE-TX mode +#define MAC_LED_LED0_10 0x00000006 // 10BASE-T mode +#define MAC_LED_LED0_DUPLEX 0x00000007 // Full-Duplex +#define MAC_LED_LED0_LINKACT 0x00000008 // Link OK & Blink=RX or TX + // Activity + +//***************************************************************************** +// +// The following are defines for the bit fields in the MAC_O_MDIX register. +// +//***************************************************************************** +#define MAC_MDIX_EN 0x00000001 // MDI/MDI-X Enable + +//***************************************************************************** +// +// The following are defines for the Ethernet Controller PHY registers. +// +//***************************************************************************** +#define PHY_MR0 0x00000000 // Ethernet PHY Management Register + // 0 - Control +#define PHY_MR1 0x00000001 // Ethernet PHY Management Register + // 1 - Status +#define PHY_MR2 0x00000002 // Ethernet PHY Management Register + // 2 - PHY Identifier 1 +#define PHY_MR3 0x00000003 // Ethernet PHY Management Register + // 3 - PHY Identifier 2 +#define PHY_MR4 0x00000004 // Ethernet PHY Management Register + // 4 - Auto-Negotiation + // Advertisement +#define PHY_MR5 0x00000005 // Ethernet PHY Management Register + // 5 - Auto-Negotiation Link + // Partner Base Page Ability +#define PHY_MR6 0x00000006 // Ethernet PHY Management Register + // 6 - Auto-Negotiation Expansion +#define PHY_MR16 0x00000010 // Ethernet PHY Management Register + // 16 - Vendor-Specific +#define PHY_MR17 0x00000011 // Ethernet PHY Management Register + // 17 - Mode Control/Status +#define PHY_MR18 0x00000012 // Ethernet PHY Management Register + // 18 - Diagnostic +#define PHY_MR19 0x00000013 // Ethernet PHY Management Register + // 19 - Transceiver Control +#define PHY_MR23 0x00000017 // Ethernet PHY Management Register + // 23 - LED Configuration +#define PHY_MR24 0x00000018 // Ethernet PHY Management Register + // 24 -MDI/MDIX Control +#define PHY_MR27 0x0000001B // Ethernet PHY Management Register + // 27 - Special Control/Status +#define PHY_MR29 0x0000001D // Ethernet PHY Management Register + // 29 - Interrupt Status +#define PHY_MR30 0x0000001E // Ethernet PHY Management Register + // 30 - Interrupt Mask +#define PHY_MR31 0x0000001F // Ethernet PHY Management Register + // 31 - PHY Special Control/Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the PHY_MR0 register. +// +//***************************************************************************** +#define PHY_MR0_RESET 0x00008000 // Reset Registers +#define PHY_MR0_LOOPBK 0x00004000 // Loopback Mode +#define PHY_MR0_SPEEDSL 0x00002000 // Speed Select +#define PHY_MR0_ANEGEN 0x00001000 // Auto-Negotiation Enable +#define PHY_MR0_PWRDN 0x00000800 // Power Down +#define PHY_MR0_ISO 0x00000400 // Isolate +#define PHY_MR0_RANEG 0x00000200 // Restart Auto-Negotiation +#define PHY_MR0_DUPLEX 0x00000100 // Set Duplex Mode +#define PHY_MR0_COLT 0x00000080 // Collision Test + +//***************************************************************************** +// +// The following are defines for the bit fields in the PHY_MR1 register. +// +//***************************************************************************** +#define PHY_MR1_100X_F 0x00004000 // 100BASE-TX Full-Duplex Mode +#define PHY_MR1_100X_H 0x00002000 // 100BASE-TX Half-Duplex Mode +#define PHY_MR1_10T_F 0x00001000 // 10BASE-T Full-Duplex Mode +#define PHY_MR1_10T_H 0x00000800 // 10BASE-T Half-Duplex Mode +#define PHY_MR1_MFPS 0x00000040 // Management Frames with Preamble + // Suppressed +#define PHY_MR1_ANEGC 0x00000020 // Auto-Negotiation Complete +#define PHY_MR1_RFAULT 0x00000010 // Remote Fault +#define PHY_MR1_ANEGA 0x00000008 // Auto-Negotiation +#define PHY_MR1_LINK 0x00000004 // Link Made +#define PHY_MR1_JAB 0x00000002 // Jabber Condition +#define PHY_MR1_EXTD 0x00000001 // Extended Capabilities + +//***************************************************************************** +// +// The following are defines for the bit fields in the PHY_MR2 register. +// +//***************************************************************************** +#define PHY_MR2_OUI_M 0x0000FFFF // Organizationally Unique + // Identifier[21:6] +#define PHY_MR2_OUI_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PHY_MR3 register. +// +//***************************************************************************** +#define PHY_MR3_OUI_M 0x0000FC00 // Organizationally Unique + // Identifier[5:0] +#define PHY_MR3_MN_M 0x000003F0 // Model Number +#define PHY_MR3_RN_M 0x0000000F // Revision Number +#define PHY_MR3_OUI_S 10 +#define PHY_MR3_MN_S 4 +#define PHY_MR3_RN_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PHY_MR4 register. +// +//***************************************************************************** +#define PHY_MR4_NP 0x00008000 // Next Page +#define PHY_MR4_RF 0x00002000 // Remote Fault +#define PHY_MR4_A3 0x00000100 // Technology Ability Field [3] +#define PHY_MR4_A2 0x00000080 // Technology Ability Field [2] +#define PHY_MR4_A1 0x00000040 // Technology Ability Field [1] +#define PHY_MR4_A0 0x00000020 // Technology Ability Field [0] +#define PHY_MR4_S_M 0x0000001F // Selector Field +#define PHY_MR4_S_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PHY_MR5 register. +// +//***************************************************************************** +#define PHY_MR5_NP 0x00008000 // Next Page +#define PHY_MR5_ACK 0x00004000 // Acknowledge +#define PHY_MR5_RF 0x00002000 // Remote Fault +#define PHY_MR5_A_M 0x00001FE0 // Technology Ability Field +#define PHY_MR5_S_M 0x0000001F // Selector Field +#define PHY_MR5_S_8023 0x00000001 // IEEE Std 802.3 +#define PHY_MR5_S_8029 0x00000002 // IEEE Std 802.9 ISLAN-16T +#define PHY_MR5_S_8025 0x00000003 // IEEE Std 802.5 +#define PHY_MR5_S_1394 0x00000004 // IEEE Std 1394 +#define PHY_MR5_A_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PHY_MR6 register. +// +//***************************************************************************** +#define PHY_MR6_PDF 0x00000010 // Parallel Detection Fault +#define PHY_MR6_LPNPA 0x00000008 // Link Partner is Next Page Able +#define PHY_MR6_PRX 0x00000002 // New Page Received +#define PHY_MR6_LPANEGA 0x00000001 // Link Partner is Auto-Negotiation + // Able + +//***************************************************************************** +// +// The following are defines for the bit fields in the PHY_MR16 register. +// +//***************************************************************************** +#define PHY_MR16_RPTR 0x00008000 // Repeater Mode +#define PHY_MR16_INPOL 0x00004000 // Interrupt Polarity +#define PHY_MR16_TXHIM 0x00001000 // Transmit High Impedance Mode +#define PHY_MR16_SQEI 0x00000800 // SQE Inhibit Testing +#define PHY_MR16_NL10 0x00000400 // Natural Loopback Mode +#define PHY_MR16_SR_M 0x000003C0 // Silicon Revision Identifier +#define PHY_MR16_APOL 0x00000020 // Auto-Polarity Disable +#define PHY_MR16_RVSPOL 0x00000010 // Receive Data Polarity +#define PHY_MR16_PCSBP 0x00000002 // PCS Bypass +#define PHY_MR16_RXCC 0x00000001 // Receive Clock Control +#define PHY_MR16_SR_S 6 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PHY_MR17 register. +// +//***************************************************************************** +#define PHY_MR17_JABBER_IE 0x00008000 // Jabber Interrupt Enable +#define PHY_MR17_FASTRIP 0x00004000 // 10-BASE-T Fast Mode Enable +#define PHY_MR17_RXER_IE 0x00004000 // Receive Error Interrupt Enable +#define PHY_MR17_EDPD 0x00002000 // Enable Energy Detect Power Down +#define PHY_MR17_PRX_IE 0x00002000 // Page Received Interrupt Enable +#define PHY_MR17_PDF_IE 0x00001000 // Parallel Detection Fault + // Interrupt Enable +#define PHY_MR17_LSQE 0x00000800 // Low Squelch Enable +#define PHY_MR17_LPACK_IE 0x00000800 // LP Acknowledge Interrupt Enable +#define PHY_MR17_LSCHG_IE 0x00000400 // Link Status Change Interrupt + // Enable +#define PHY_MR17_RFAULT_IE 0x00000200 // Remote Fault Interrupt Enable +#define PHY_MR17_ANEGCOMP_IE 0x00000100 // Auto-Negotiation Complete + // Interrupt Enable +#define PHY_MR17_FASTEST 0x00000100 // Auto-Negotiation Test Mode +#define PHY_MR17_JABBER_INT 0x00000080 // Jabber Event Interrupt +#define PHY_MR17_RXER_INT 0x00000040 // Receive Error Interrupt +#define PHY_MR17_PRX_INT 0x00000020 // Page Receive Interrupt +#define PHY_MR17_PDF_INT 0x00000010 // Parallel Detection Fault + // Interrupt +#define PHY_MR17_LPACK_INT 0x00000008 // LP Acknowledge Interrupt +#define PHY_MR17_LSCHG_INT 0x00000004 // Link Status Change Interrupt +#define PHY_MR17_FGLS 0x00000004 // Force Good Link Status +#define PHY_MR17_RFAULT_INT 0x00000002 // Remote Fault Interrupt +#define PHY_MR17_ENON 0x00000002 // Energy On +#define PHY_MR17_ANEGCOMP_INT 0x00000001 // Auto-Negotiation Complete + // Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the PHY_MR18 register. +// +//***************************************************************************** +#define PHY_MR18_ANEGF 0x00001000 // Auto-Negotiation Failure +#define PHY_MR18_DPLX 0x00000800 // Duplex Mode +#define PHY_MR18_RATE 0x00000400 // Rate +#define PHY_MR18_RXSD 0x00000200 // Receive Detection +#define PHY_MR18_RX_LOCK 0x00000100 // Receive PLL Lock + +//***************************************************************************** +// +// The following are defines for the bit fields in the PHY_MR19 register. +// +//***************************************************************************** +#define PHY_MR19_TXO_M 0x0000C000 // Transmit Amplitude Selection +#define PHY_MR19_TXO_00DB 0x00000000 // Gain set for 0.0dB of insertion + // loss +#define PHY_MR19_TXO_04DB 0x00004000 // Gain set for 0.4dB of insertion + // loss +#define PHY_MR19_TXO_08DB 0x00008000 // Gain set for 0.8dB of insertion + // loss +#define PHY_MR19_TXO_12DB 0x0000C000 // Gain set for 1.2dB of insertion + // loss + +//***************************************************************************** +// +// The following are defines for the bit fields in the PHY_MR23 register. +// +//***************************************************************************** +#define PHY_MR23_LED1_M 0x000000F0 // LED1 Source +#define PHY_MR23_LED1_LINK 0x00000000 // Link OK +#define PHY_MR23_LED1_RXTX 0x00000010 // RX or TX Activity (Default LED1) +#define PHY_MR23_LED1_100 0x00000050 // 100BASE-TX mode +#define PHY_MR23_LED1_10 0x00000060 // 10BASE-T mode +#define PHY_MR23_LED1_DUPLEX 0x00000070 // Full-Duplex +#define PHY_MR23_LED1_LINKACT 0x00000080 // Link OK & Blink=RX or TX + // Activity +#define PHY_MR23_LED0_M 0x0000000F // LED0 Source +#define PHY_MR23_LED0_LINK 0x00000000 // Link OK (Default LED0) +#define PHY_MR23_LED0_RXTX 0x00000001 // RX or TX Activity +#define PHY_MR23_LED0_100 0x00000005 // 100BASE-TX mode +#define PHY_MR23_LED0_10 0x00000006 // 10BASE-T mode +#define PHY_MR23_LED0_DUPLEX 0x00000007 // Full-Duplex +#define PHY_MR23_LED0_LINKACT 0x00000008 // Link OK & Blink=RX or TX + // Activity + +//***************************************************************************** +// +// The following are defines for the bit fields in the PHY_MR24 register. +// +//***************************************************************************** +#define PHY_MR24_PD_MODE 0x00000080 // Parallel Detection Mode +#define PHY_MR24_AUTO_SW 0x00000040 // Auto-Switching Enable +#define PHY_MR24_MDIX 0x00000020 // Auto-Switching Configuration +#define PHY_MR24_MDIX_CM 0x00000010 // Auto-Switching Complete +#define PHY_MR24_MDIX_SD_M 0x0000000F // Auto-Switching Seed +#define PHY_MR24_MDIX_SD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PHY_MR27 register. +// +//***************************************************************************** +#define PHY_MR27_XPOL 0x00000010 // Polarity State of 10 BASE-T + +//***************************************************************************** +// +// The following are defines for the bit fields in the PHY_MR29 register. +// +//***************************************************************************** +#define PHY_MR29_EONIS 0x00000080 // ENERGYON Interrupt +#define PHY_MR29_ANCOMPIS 0x00000040 // Auto-Negotiation Complete + // Interrupt +#define PHY_MR29_RFLTIS 0x00000020 // Remote Fault Interrupt +#define PHY_MR29_LDIS 0x00000010 // Link Down Interrupt +#define PHY_MR29_LPACKIS 0x00000008 // Auto-Negotiation LP Acknowledge +#define PHY_MR29_PDFIS 0x00000004 // Parallel Detection Fault +#define PHY_MR29_PRXIS 0x00000002 // Auto Negotiation Page Received + +//***************************************************************************** +// +// The following are defines for the bit fields in the PHY_MR30 register. +// +//***************************************************************************** +#define PHY_MR30_EONIM 0x00000080 // ENERGYON Interrupt Enabled +#define PHY_MR30_ANCOMPIM 0x00000040 // Auto-Negotiation Complete + // Interrupt Enabled +#define PHY_MR30_RFLTIM 0x00000020 // Remote Fault Interrupt Enabled +#define PHY_MR30_LDIM 0x00000010 // Link Down Interrupt Enabled +#define PHY_MR30_LPACKIM 0x00000008 // Auto-Negotiation LP Acknowledge + // Enabled +#define PHY_MR30_PDFIM 0x00000004 // Parallel Detection Fault Enabled +#define PHY_MR30_PRXIM 0x00000002 // Auto Negotiation Page Received + // Enabled + +//***************************************************************************** +// +// The following are defines for the bit fields in the PHY_MR31 register. +// +//***************************************************************************** +#define PHY_MR31_AUTODONE 0x00001000 // Auto Negotiation Done +#define PHY_MR31_SPEED_M 0x0000001C // HCD Speed Value +#define PHY_MR31_SPEED_10HD 0x00000004 // 10BASE-T half duplex +#define PHY_MR31_SPEED_100HD 0x00000008 // 100BASE-T half duplex +#define PHY_MR31_SPEED_10FD 0x00000014 // 10BASE-T full duplex +#define PHY_MR31_SPEED_100FD 0x00000018 // 100BASE-T full duplex +#define PHY_MR31_SCRDIS 0x00000001 // Scramble Disable + +//***************************************************************************** +// +// The following definitions are deprecated. +// +//***************************************************************************** +#ifndef DEPRECATED + +//***************************************************************************** +// +// The following are deprecated defines for the Ethernet MAC register offsets. +// +//***************************************************************************** +#define MAC_O_IS 0x00000000 // Interrupt Status Register + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the MAC_O_IS +// register. +// +//***************************************************************************** +#define MAC_IS_PHYINT 0x00000040 // PHY Interrupt +#define MAC_IS_MDINT 0x00000020 // MDI Transaction Complete +#define MAC_IS_RXER 0x00000010 // RX Error +#define MAC_IS_FOV 0x00000008 // RX FIFO Overrun +#define MAC_IS_TXEMP 0x00000004 // TX FIFO Empy +#define MAC_IS_TXER 0x00000002 // TX Error +#define MAC_IS_RXINT 0x00000001 // RX Packet Available + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the MAC_O_IA0 +// register. +// +//***************************************************************************** +#define MAC_IA0_MACOCT4 0xFF000000 // 4th Octet of MAC address +#define MAC_IA0_MACOCT3 0x00FF0000 // 3rd Octet of MAC address +#define MAC_IA0_MACOCT2 0x0000FF00 // 2nd Octet of MAC address +#define MAC_IA0_MACOCT1 0x000000FF // 1st Octet of MAC address + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the MAC_O_IA1 +// register. +// +//***************************************************************************** +#define MAC_IA1_MACOCT6 0x0000FF00 // 6th Octet of MAC address +#define MAC_IA1_MACOCT5 0x000000FF // 5th Octet of MAC address + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the MAC_O_THR +// register. +// +//***************************************************************************** +#define MAC_THR_THRESH 0x0000003F // Transmit Threshold Value + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the MAC_O_MCTL +// register. +// +//***************************************************************************** +#define MAC_MCTL_REGADR 0x000000F8 // Address for Next MII Transaction + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the MAC_O_MDV +// register. +// +//***************************************************************************** +#define MAC_MDV_DIV 0x000000FF // Clock Divider for MDC for TX + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the MAC_O_MTXD +// register. +// +//***************************************************************************** +#define MAC_MTXD_MDTX 0x0000FFFF // Data for Next MII Transaction + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the MAC_O_MRXD +// register. +// +//***************************************************************************** +#define MAC_MRXD_MDRX 0x0000FFFF // Data Read from Last MII Trans + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the MAC_O_NP +// register. +// +//***************************************************************************** +#define MAC_NP_NPR 0x0000003F // Number of RX Frames in FIFO + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the PHY_MR23 +// register. +// +//***************************************************************************** +#define PHY_MR23_LED1_TX 0x00000020 // TX Activity +#define PHY_MR23_LED1_RX 0x00000030 // RX Activity +#define PHY_MR23_LED1_COL 0x00000040 // Collision +#define PHY_MR23_LED0_TX 0x00000002 // TX Activity +#define PHY_MR23_LED0_RX 0x00000003 // RX Activity +#define PHY_MR23_LED0_COL 0x00000004 // Collision + +//***************************************************************************** +// +// The following are deprecated defines for the reset values of the MAC +// registers. +// +//***************************************************************************** +#define MAC_RV_MDV 0x00000080 +#define MAC_RV_IM 0x0000007F +#define MAC_RV_THR 0x0000003F +#define MAC_RV_RCTL 0x00000008 +#define MAC_RV_IA0 0x00000000 +#define MAC_RV_TCTL 0x00000000 +#define MAC_RV_DATA 0x00000000 +#define MAC_RV_MRXD 0x00000000 +#define MAC_RV_TR 0x00000000 +#define MAC_RV_IS 0x00000000 +#define MAC_RV_NP 0x00000000 +#define MAC_RV_MCTL 0x00000000 +#define MAC_RV_MTXD 0x00000000 +#define MAC_RV_IA1 0x00000000 +#define MAC_RV_IACK 0x00000000 +#define MAC_RV_MADD 0x00000000 + +#endif + +#endif // __HW_ETHERNET_H__ diff --git a/bsp/lm3s_9b9x/Libraries/inc/hw_flash.h b/bsp/lm3s_9b9x/Libraries/inc/hw_flash.h new file mode 100644 index 0000000000000000000000000000000000000000..19b4c2b559e5083b5b9547a00d5dd45b1953733d --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/inc/hw_flash.h @@ -0,0 +1,374 @@ +//***************************************************************************** +// +// hw_flash.h - Macros used when accessing the flash controller. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_FLASH_H__ +#define __HW_FLASH_H__ + +//***************************************************************************** +// +// The following are defines for the FLASH register offsets. +// +//***************************************************************************** +#define FLASH_FMA 0x400FD000 // Flash Memory Address +#define FLASH_FMD 0x400FD004 // Flash Memory Data +#define FLASH_FMC 0x400FD008 // Flash Memory Control +#define FLASH_FCRIS 0x400FD00C // Flash Controller Raw Interrupt + // Status +#define FLASH_FCIM 0x400FD010 // Flash Controller Interrupt Mask +#define FLASH_FCMISC 0x400FD014 // Flash Controller Masked + // Interrupt Status and Clear +#define FLASH_FMC2 0x400FD020 // Flash Memory Control 2 +#define FLASH_FWBVAL 0x400FD030 // Flash Write Buffer Valid +#define FLASH_FCTL 0x400FD0F8 // Flash Control +#define FLASH_FWBN 0x400FD100 // Flash Write Buffer n +#define FLASH_RMCTL 0x400FE0F0 // ROM Control +#define FLASH_RMVER 0x400FE0F4 // ROM Version Register +#define FLASH_FMPRE 0x400FE130 // Flash Memory Protection Read + // Enable +#define FLASH_FMPPE 0x400FE134 // Flash Memory Protection Program + // Enable +#define FLASH_USECRL 0x400FE140 // USec Reload +#define FLASH_USERDBG 0x400FE1D0 // User Debug +#define FLASH_BOOTCFG 0x400FE1D0 // Boot Configuration +#define FLASH_USERREG0 0x400FE1E0 // User Register 0 +#define FLASH_USERREG1 0x400FE1E4 // User Register 1 +#define FLASH_USERREG2 0x400FE1E8 // User Register 2 +#define FLASH_USERREG3 0x400FE1EC // User Register 3 +#define FLASH_FMPRE0 0x400FE200 // Flash Memory Protection Read + // Enable 0 +#define FLASH_FMPRE1 0x400FE204 // Flash Memory Protection Read + // Enable 1 +#define FLASH_FMPRE2 0x400FE208 // Flash Memory Protection Read + // Enable 2 +#define FLASH_FMPRE3 0x400FE20C // Flash Memory Protection Read + // Enable 3 +#define FLASH_FMPPE0 0x400FE400 // Flash Memory Protection Program + // Enable 0 +#define FLASH_FMPPE1 0x400FE404 // Flash Memory Protection Program + // Enable 1 +#define FLASH_FMPPE2 0x400FE408 // Flash Memory Protection Program + // Enable 2 +#define FLASH_FMPPE3 0x400FE40C // Flash Memory Protection Program + // Enable 3 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FMA register. +// +//***************************************************************************** +#define FLASH_FMA_OFFSET_M 0x0003FFFF // Address Offset +#define FLASH_FMA_OFFSET_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FMD register. +// +//***************************************************************************** +#define FLASH_FMD_DATA_M 0xFFFFFFFF // Data Value +#define FLASH_FMD_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FMC register. +// +//***************************************************************************** +#define FLASH_FMC_WRKEY 0xA4420000 // FLASH write key +#define FLASH_FMC_COMT 0x00000008 // Commit Register Value +#define FLASH_FMC_MERASE 0x00000004 // Mass Erase Flash Memory +#define FLASH_FMC_ERASE 0x00000002 // Erase a Page of Flash Memory +#define FLASH_FMC_WRITE 0x00000001 // Write a Word into Flash Memory + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FCRIS register. +// +//***************************************************************************** +#define FLASH_FCRIS_PRIS 0x00000002 // Programming Raw Interrupt Status +#define FLASH_FCRIS_ARIS 0x00000001 // Access Raw Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FCIM register. +// +//***************************************************************************** +#define FLASH_FCIM_PMASK 0x00000002 // Programming Interrupt Mask +#define FLASH_FCIM_AMASK 0x00000001 // Access Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FCMISC register. +// +//***************************************************************************** +#define FLASH_FCMISC_PMISC 0x00000002 // Programming Masked Interrupt + // Status and Clear +#define FLASH_FCMISC_AMISC 0x00000001 // Access Masked Interrupt Status + // and Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FMC2 register. +// +//***************************************************************************** +#define FLASH_FMC2_WRKEY 0xA4420000 // FLASH write key +#define FLASH_FMC2_WRBUF 0x00000001 // Buffered Flash Memory Write + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FWBVAL register. +// +//***************************************************************************** +#define FLASH_FWBVAL_FWB_M 0xFFFFFFFF // Flash Memory Write Buffer + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FCTL register. +// +//***************************************************************************** +#define FLASH_FCTL_USDACK 0x00000002 // User Shut Down Acknowledge +#define FLASH_FCTL_USDREQ 0x00000001 // User Shut Down Request + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FWBN register. +// +//***************************************************************************** +#define FLASH_FWBN_DATA_M 0xFFFFFFFF // Data + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_RMCTL register. +// +//***************************************************************************** +#define FLASH_RMCTL_BA 0x00000001 // Boot Alias + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_RMVER register. +// +//***************************************************************************** +#define FLASH_RMVER_CONT_M 0xFF000000 // ROM Contents +#define FLASH_RMVER_CONT_LM 0x00000000 // Stellaris Boot Loader & + // DriverLib +#define FLASH_RMVER_CONT_LM_AES 0x02000000 // Stellaris Boot Loader & + // DriverLib with AES +#define FLASH_RMVER_CONT_LM_AES_SAFERTOS \ + 0x03000000 // Stellaris Boot Loader & + // DriverLib with AES and SAFERTOS +#define FLASH_RMVER_CONT_LM_AES2 \ + 0x05000000 // Stellaris Boot Loader & + // DriverLib with AES +#define FLASH_RMVER_VER_M 0x0000FF00 // ROM Version +#define FLASH_RMVER_REV_M 0x000000FF // ROM Revision +#define FLASH_RMVER_VER_S 8 +#define FLASH_RMVER_REV_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_USECRL register. +// +//***************************************************************************** +#define FLASH_USECRL_M 0x000000FF // Microsecond Reload Value +#define FLASH_USECRL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_USERDBG register. +// +//***************************************************************************** +#define FLASH_USERDBG_NW 0x80000000 // User Debug Not Written +#define FLASH_USERDBG_DATA_M 0x7FFFFFFC // User Data +#define FLASH_USERDBG_DBG1 0x00000002 // Debug Control 1 +#define FLASH_USERDBG_DBG0 0x00000001 // Debug Control 0 +#define FLASH_USERDBG_DATA_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_BOOTCFG register. +// +//***************************************************************************** +#define FLASH_BOOTCFG_NW 0x80000000 // Not Written +#define FLASH_BOOTCFG_PORT_M 0x0000E000 // Boot GPIO Port +#define FLASH_BOOTCFG_PORT_A 0x00000000 // Port A +#define FLASH_BOOTCFG_PORT_B 0x00002000 // Port B +#define FLASH_BOOTCFG_PORT_C 0x00004000 // Port C +#define FLASH_BOOTCFG_PORT_D 0x00006000 // Port D +#define FLASH_BOOTCFG_PORT_E 0x00008000 // Port E +#define FLASH_BOOTCFG_PORT_F 0x0000A000 // Port F +#define FLASH_BOOTCFG_PORT_G 0x0000C000 // Port G +#define FLASH_BOOTCFG_PORT_H 0x0000E000 // Port H +#define FLASH_BOOTCFG_PIN_M 0x00001C00 // Boot GPIO Pin +#define FLASH_BOOTCFG_PIN_0 0x00000000 // Pin 0 +#define FLASH_BOOTCFG_PIN_1 0x00000400 // Pin 1 +#define FLASH_BOOTCFG_PIN_2 0x00000800 // Pin 2 +#define FLASH_BOOTCFG_PIN_3 0x00000C00 // Pin 3 +#define FLASH_BOOTCFG_PIN_4 0x00001000 // Pin 4 +#define FLASH_BOOTCFG_PIN_5 0x00001400 // Pin 5 +#define FLASH_BOOTCFG_PIN_6 0x00001800 // Pin 6 +#define FLASH_BOOTCFG_PIN_7 0x00001C00 // Pin 7 +#define FLASH_BOOTCFG_POL 0x00000200 // Boot GPIO Polarity +#define FLASH_BOOTCFG_EN 0x00000100 // Boot GPIO Enable +#define FLASH_BOOTCFG_DBG1 0x00000002 // Debug Control 1 +#define FLASH_BOOTCFG_DBG0 0x00000001 // Debug Control 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_USERREG0 register. +// +//***************************************************************************** +#define FLASH_USERREG0_NW 0x80000000 // Not Written +#define FLASH_USERREG0_DATA_M 0x7FFFFFFF // User Data +#define FLASH_USERREG0_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_USERREG1 register. +// +//***************************************************************************** +#define FLASH_USERREG1_NW 0x80000000 // Not Written +#define FLASH_USERREG1_DATA_M 0x7FFFFFFF // User Data +#define FLASH_USERREG1_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_USERREG2 register. +// +//***************************************************************************** +#define FLASH_USERREG2_NW 0x80000000 // Not Written +#define FLASH_USERREG2_DATA_M 0x7FFFFFFF // User Data +#define FLASH_USERREG2_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_USERREG3 register. +// +//***************************************************************************** +#define FLASH_USERREG3_NW 0x80000000 // Not Written +#define FLASH_USERREG3_DATA_M 0x7FFFFFFF // User Data +#define FLASH_USERREG3_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FMPRE and +// FLASH_FMPPE registers. +// +//***************************************************************************** +#define FLASH_FMP_BLOCK_31 0x80000000 // Enable for block 31 +#define FLASH_FMP_BLOCK_30 0x40000000 // Enable for block 30 +#define FLASH_FMP_BLOCK_29 0x20000000 // Enable for block 29 +#define FLASH_FMP_BLOCK_28 0x10000000 // Enable for block 28 +#define FLASH_FMP_BLOCK_27 0x08000000 // Enable for block 27 +#define FLASH_FMP_BLOCK_26 0x04000000 // Enable for block 26 +#define FLASH_FMP_BLOCK_25 0x02000000 // Enable for block 25 +#define FLASH_FMP_BLOCK_24 0x01000000 // Enable for block 24 +#define FLASH_FMP_BLOCK_23 0x00800000 // Enable for block 23 +#define FLASH_FMP_BLOCK_22 0x00400000 // Enable for block 22 +#define FLASH_FMP_BLOCK_21 0x00200000 // Enable for block 21 +#define FLASH_FMP_BLOCK_20 0x00100000 // Enable for block 20 +#define FLASH_FMP_BLOCK_19 0x00080000 // Enable for block 19 +#define FLASH_FMP_BLOCK_18 0x00040000 // Enable for block 18 +#define FLASH_FMP_BLOCK_17 0x00020000 // Enable for block 17 +#define FLASH_FMP_BLOCK_16 0x00010000 // Enable for block 16 +#define FLASH_FMP_BLOCK_15 0x00008000 // Enable for block 15 +#define FLASH_FMP_BLOCK_14 0x00004000 // Enable for block 14 +#define FLASH_FMP_BLOCK_13 0x00002000 // Enable for block 13 +#define FLASH_FMP_BLOCK_12 0x00001000 // Enable for block 12 +#define FLASH_FMP_BLOCK_11 0x00000800 // Enable for block 11 +#define FLASH_FMP_BLOCK_10 0x00000400 // Enable for block 10 +#define FLASH_FMP_BLOCK_9 0x00000200 // Enable for block 9 +#define FLASH_FMP_BLOCK_8 0x00000100 // Enable for block 8 +#define FLASH_FMP_BLOCK_7 0x00000080 // Enable for block 7 +#define FLASH_FMP_BLOCK_6 0x00000040 // Enable for block 6 +#define FLASH_FMP_BLOCK_5 0x00000020 // Enable for block 5 +#define FLASH_FMP_BLOCK_4 0x00000010 // Enable for block 4 +#define FLASH_FMP_BLOCK_3 0x00000008 // Enable for block 3 +#define FLASH_FMP_BLOCK_2 0x00000004 // Enable for block 2 +#define FLASH_FMP_BLOCK_1 0x00000002 // Enable for block 1 +#define FLASH_FMP_BLOCK_0 0x00000001 // Enable for block 0 + +//***************************************************************************** +// +// The following are defines for the erase size of the FLASH block that is +// erased by an erase operation, and the protect size is the size of the FLASH +// block that is protected by each protection register. +// +//***************************************************************************** +#define FLASH_PROTECT_SIZE 0x00000800 +#define FLASH_ERASE_SIZE 0x00000400 + +//***************************************************************************** +// +// The following definitions are deprecated. +// +//***************************************************************************** +#ifndef DEPRECATED + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the FLASH_FMC +// register. +// +//***************************************************************************** +#define FLASH_FMC_WRKEY_MASK 0xFFFF0000 // FLASH write key mask +#define FLASH_FMC_WRKEY_M 0xFFFF0000 // Flash Memory Write Key +#define FLASH_FMC_WRKEY_S 16 + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the FLASH_FCRIS +// register. +// +//***************************************************************************** +#define FLASH_FCRIS_PROGRAM 0x00000002 // Programming status +#define FLASH_FCRIS_ACCESS 0x00000001 // Invalid access status + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the FLASH_FCIM +// register. +// +//***************************************************************************** +#define FLASH_FCIM_PROGRAM 0x00000002 // Programming mask +#define FLASH_FCIM_ACCESS 0x00000001 // Invalid access mask + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the FLASH_FCMISC +// register. +// +//***************************************************************************** +#define FLASH_FCMISC_PROGRAM 0x00000002 // Programming status +#define FLASH_FCMISC_ACCESS 0x00000001 // Invalid access status + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the FLASH_USECRL +// register. +// +//***************************************************************************** +#define FLASH_USECRL_MASK 0x000000FF // Clock per uSec +#define FLASH_USECRL_SHIFT 0 + +#endif + +#endif // __HW_FLASH_H__ diff --git a/bsp/lm3s_9b9x/Libraries/inc/hw_gpio.h b/bsp/lm3s_9b9x/Libraries/inc/hw_gpio.h new file mode 100644 index 0000000000000000000000000000000000000000..4558688f01a02b11724925813566e420b868cf8b --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/inc/hw_gpio.h @@ -0,0 +1,592 @@ +//***************************************************************************** +// +// hw_gpio.h - Defines and Macros for GPIO hardware. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_GPIO_H__ +#define __HW_GPIO_H__ + +//***************************************************************************** +// +// The following are defines for the GPIO register offsets. +// +//***************************************************************************** +#define GPIO_O_DATA 0x00000000 // GPIO Data +#define GPIO_O_DIR 0x00000400 // GPIO Direction +#define GPIO_O_IS 0x00000404 // GPIO Interrupt Sense +#define GPIO_O_IBE 0x00000408 // GPIO Interrupt Both Edges +#define GPIO_O_IEV 0x0000040C // GPIO Interrupt Event +#define GPIO_O_IM 0x00000410 // GPIO Interrupt Mask +#define GPIO_O_RIS 0x00000414 // GPIO Raw Interrupt Status +#define GPIO_O_MIS 0x00000418 // GPIO Masked Interrupt Status +#define GPIO_O_ICR 0x0000041C // GPIO Interrupt Clear +#define GPIO_O_AFSEL 0x00000420 // GPIO Alternate Function Select +#define GPIO_O_DR2R 0x00000500 // GPIO 2-mA Drive Select +#define GPIO_O_DR4R 0x00000504 // GPIO 4-mA Drive Select +#define GPIO_O_DR8R 0x00000508 // GPIO 8-mA Drive Select +#define GPIO_O_ODR 0x0000050C // GPIO Open Drain Select +#define GPIO_O_PUR 0x00000510 // GPIO Pull-Up Select +#define GPIO_O_PDR 0x00000514 // GPIO Pull-Down Select +#define GPIO_O_SLR 0x00000518 // GPIO Slew Rate Control Select +#define GPIO_O_DEN 0x0000051C // GPIO Digital Enable +#define GPIO_O_LOCK 0x00000520 // GPIO Lock +#define GPIO_O_CR 0x00000524 // GPIO Commit +#define GPIO_O_AMSEL 0x00000528 // GPIO Analog Mode Select +#define GPIO_O_PCTL 0x0000052C // GPIO Port Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the GPIO_O_LOCK register. +// +//***************************************************************************** +#define GPIO_LOCK_M 0xFFFFFFFF // GPIO Lock +#define GPIO_LOCK_UNLOCKED 0x00000000 // The GPIOCR register is unlocked + // and may be modified +#define GPIO_LOCK_LOCKED 0x00000001 // The GPIOCR register is locked + // and may not be modified +#define GPIO_LOCK_KEY 0x1ACCE551 // Unlocks the GPIO_CR register +#define GPIO_LOCK_KEY_DD 0x4C4F434B // Unlocks the GPIO_CR register on + // DustDevil-class devices and + // later + +//***************************************************************************** +// +// The following are defines for the bit fields in the GPIO_PCTL register for +// port A. +// +//***************************************************************************** +#define GPIO_PCTL_PA0_M 0x0000000F // PA0 mask +#define GPIO_PCTL_PA0_U0RX 0x00000001 // U0RX on PA0 +#define GPIO_PCTL_PA0_I2C1SCL 0x00000008 // I2C1SCL on PA0 +#define GPIO_PCTL_PA0_U1RX 0x00000009 // U1RX on PA0 +#define GPIO_PCTL_PA1_M 0x000000F0 // PA1 mask +#define GPIO_PCTL_PA1_U0TX 0x00000010 // U0TX on PA1 +#define GPIO_PCTL_PA1_I2C1SDA 0x00000080 // I2C1SDA on PA1 +#define GPIO_PCTL_PA1_U1TX 0x00000090 // U1TX on PA1 +#define GPIO_PCTL_PA2_M 0x00000F00 // PA2 mask +#define GPIO_PCTL_PA2_SSI0CLK 0x00000100 // SSI0CLK on PA2 +#define GPIO_PCTL_PA2_PWM4 0x00000400 // PWM4 on PA2 +#define GPIO_PCTL_PA2_I2S0RXSD 0x00000900 // I2S0RXSD on PA2 +#define GPIO_PCTL_PA3_M 0x0000F000 // PA3 mask +#define GPIO_PCTL_PA3_SSI0FSS 0x00001000 // SSI0FSS on PA3 +#define GPIO_PCTL_PA3_PWM5 0x00004000 // PWM5 on PA3 +#define GPIO_PCTL_PA3_I2S0RXMCLK \ + 0x00009000 // I2S0RXMCLK on PA3 +#define GPIO_PCTL_PA4_M 0x000F0000 // PA4 mask +#define GPIO_PCTL_PA4_SSI0RX 0x00010000 // SSI0RX on PA4 +#define GPIO_PCTL_PA4_PWM6 0x00040000 // PWM6 on PA4 +#define GPIO_PCTL_PA4_CAN0RX 0x00050000 // CAN0RX on PA4 +#define GPIO_PCTL_PA4_I2S0TXSCK 0x00090000 // I2S0TXSCK on PA4 +#define GPIO_PCTL_PA5_M 0x00F00000 // PA5 mask +#define GPIO_PCTL_PA5_SSI0TX 0x00100000 // SSI0TX on PA5 +#define GPIO_PCTL_PA5_PWM7 0x00400000 // PWM7 on PA5 +#define GPIO_PCTL_PA5_CAN0TX 0x00500000 // CAN0TX on PA5 +#define GPIO_PCTL_PA5_I2S0TXWS 0x00900000 // I2S0TXWS on PA5 +#define GPIO_PCTL_PA6_M 0x0F000000 // PA6 mask +#define GPIO_PCTL_PA6_I2C1SCL 0x01000000 // I2C1SCL on PA6 +#define GPIO_PCTL_PA6_CCP1 0x02000000 // CCP1 on PA6 +#define GPIO_PCTL_PA6_PWM0 0x04000000 // PWM0 on PA6 +#define GPIO_PCTL_PA6_PWM4 0x05000000 // PWM4 on PA6 +#define GPIO_PCTL_PA6_CAN0RX 0x06000000 // CAN0RX on PA6 +#define GPIO_PCTL_PA6_USB0EPEN 0x08000000 // USB0EPEN on PA6 +#define GPIO_PCTL_PA6_U1CTS 0x09000000 // U1CTS on PA6 +#define GPIO_PCTL_PA7_M 0xF0000000 // PA7 mask +#define GPIO_PCTL_PA7_I2C1SDA 0x10000000 // I2C1SDA on PA7 +#define GPIO_PCTL_PA7_CCP4 0x20000000 // CCP4 on PA7 +#define GPIO_PCTL_PA7_PWM1 0x40000000 // PWM1 on PA7 +#define GPIO_PCTL_PA7_PWM5 0x50000000 // PWM5 on PA7 +#define GPIO_PCTL_PA7_CAN0TX 0x60000000 // CAN0TX on PA7 +#define GPIO_PCTL_PA7_CCP3 0x70000000 // CCP3 on PA7 +#define GPIO_PCTL_PA7_USB0PFLT 0x80000000 // USB0PFLT on PA7 +#define GPIO_PCTL_PA7_U1DCD 0x90000000 // U1DCD on PA7 + +//***************************************************************************** +// +// The following are defines for the bit fields in the GPIO_PCTL register for +// port B. +// +//***************************************************************************** +#define GPIO_PCTL_PB0_M 0x0000000F // PB0 mask +#define GPIO_PCTL_PB0_CCP0 0x00000001 // CCP0 on PB0 +#define GPIO_PCTL_PB0_PWM2 0x00000002 // PWM2 on PB0 +#define GPIO_PCTL_PB0_U1RX 0x00000005 // U1RX on PB0 +#define GPIO_PCTL_PB1_M 0x000000F0 // PB1 mask +#define GPIO_PCTL_PB1_CCP2 0x00000010 // CCP2 on PB1 +#define GPIO_PCTL_PB1_PWM3 0x00000020 // PWM3 on PB1 +#define GPIO_PCTL_PB1_CCP1 0x00000040 // CCP1 on PB1 +#define GPIO_PCTL_PB1_U1TX 0x00000050 // U1TX on PB1 +#define GPIO_PCTL_PB2_M 0x00000F00 // PB2 mask +#define GPIO_PCTL_PB2_I2C0SCL 0x00000100 // I2C0SCL on PB2 +#define GPIO_PCTL_PB2_IDX0 0x00000200 // IDX0 on PB2 +#define GPIO_PCTL_PB2_CCP3 0x00000400 // CCP3 on PB2 +#define GPIO_PCTL_PB2_CCP0 0x00000500 // CCP0 on PB2 +#define GPIO_PCTL_PB2_USB0EPEN 0x00000800 // USB0EPEN on PB2 +#define GPIO_PCTL_PB3_M 0x0000F000 // PB3 mask +#define GPIO_PCTL_PB3_I2C0SDA 0x00001000 // I2C0SDA on PB3 +#define GPIO_PCTL_PB3_FAULT0 0x00002000 // FAULT0 on PB3 +#define GPIO_PCTL_PB3_FAULT3 0x00004000 // FAULT3 on PB3 +#define GPIO_PCTL_PB3_USB0PFLT 0x00008000 // USB0PFLT on PB3 +#define GPIO_PCTL_PB4_M 0x000F0000 // PB4 mask +#define GPIO_PCTL_PB4_U2RX 0x00040000 // U2RX on PB4 +#define GPIO_PCTL_PB4_CAN0RX 0x00050000 // CAN0RX on PB4 +#define GPIO_PCTL_PB4_IDX0 0x00060000 // IDX0 on PB4 +#define GPIO_PCTL_PB4_U1RX 0x00070000 // U1RX on PB4 +#define GPIO_PCTL_PB4_EPI0S23 0x00080000 // EPI0S23 on PB4 +#define GPIO_PCTL_PB5_M 0x00F00000 // PB5 mask +#define GPIO_PCTL_PB5_C0O 0x00100000 // C0O on PB5 +#define GPIO_PCTL_PB5_CCP5 0x00200000 // CCP5 on PB5 +#define GPIO_PCTL_PB5_CCP6 0x00300000 // CCP6 on PB5 +#define GPIO_PCTL_PB5_CCP0 0x00400000 // CCP0 on PB5 +#define GPIO_PCTL_PB5_CAN0TX 0x00500000 // CAN0TX on PB5 +#define GPIO_PCTL_PB5_CCP2 0x00600000 // CCP2 on PB5 +#define GPIO_PCTL_PB5_U1TX 0x00700000 // U1TX on PB5 +#define GPIO_PCTL_PB5_EPI0S22 0x00800000 // EPI0S22 on PB5 +#define GPIO_PCTL_PB6_M 0x0F000000 // PB6 mask +#define GPIO_PCTL_PB6_CCP1 0x01000000 // CCP1 on PB6 +#define GPIO_PCTL_PB6_CCP7 0x02000000 // CCP7 on PB6 +#define GPIO_PCTL_PB6_C0O 0x03000000 // C0O on PB6 +#define GPIO_PCTL_PB6_FAULT1 0x04000000 // FAULT1 on PB6 +#define GPIO_PCTL_PB6_IDX0 0x05000000 // IDX0 on PB6 +#define GPIO_PCTL_PB6_CCP5 0x06000000 // CCP5 on PB6 +#define GPIO_PCTL_PB6_I2S0TXSCK 0x09000000 // I2S0TXSCK on PB6 +#define GPIO_PCTL_PB7_M 0xF0000000 // PB7 mask +#define GPIO_PCTL_PB7_NMI 0x40000000 // NMI on PB7 + +//***************************************************************************** +// +// The following are defines for the bit fields in the GPIO_PCTL register for +// port C. +// +//***************************************************************************** +#define GPIO_PCTL_PC0_M 0x0000000F // PC0 mask +#define GPIO_PCTL_PC0_TCK 0x00000003 // TCK on PC0 +#define GPIO_PCTL_PC1_M 0x000000F0 // PC1 mask +#define GPIO_PCTL_PC1_TMS 0x00000030 // TMS on PC1 +#define GPIO_PCTL_PC2_M 0x00000F00 // PC2 mask +#define GPIO_PCTL_PC2_TDI 0x00000300 // TDI on PC2 +#define GPIO_PCTL_PC3_M 0x0000F000 // PC3 mask +#define GPIO_PCTL_PC3_TDO 0x00003000 // TDO on PC3 +#define GPIO_PCTL_PC4_M 0x000F0000 // PC4 mask +#define GPIO_PCTL_PC4_CCP5 0x00010000 // CCP5 on PC4 +#define GPIO_PCTL_PC4_PHA0 0x00020000 // PHA0 on PC4 +#define GPIO_PCTL_PC4_PWM6 0x00040000 // PWM6 on PC4 +#define GPIO_PCTL_PC4_CCP2 0x00050000 // CCP2 on PC4 +#define GPIO_PCTL_PC4_CCP4 0x00060000 // CCP4 on PC4 +#define GPIO_PCTL_PC4_EPI0S2 0x00080000 // EPI0S2 on PC4 +#define GPIO_PCTL_PC4_CCP1 0x00090000 // CCP1 on PC4 +#define GPIO_PCTL_PC5_M 0x00F00000 // PC5 mask +#define GPIO_PCTL_PC5_CCP1 0x00100000 // CCP1 on PC5 +#define GPIO_PCTL_PC5_C1O 0x00200000 // C1O on PC5 +#define GPIO_PCTL_PC5_C0O 0x00300000 // C0O on PC5 +#define GPIO_PCTL_PC5_FAULT2 0x00400000 // FAULT2 on PC5 +#define GPIO_PCTL_PC5_CCP3 0x00500000 // CCP3 on PC5 +#define GPIO_PCTL_PC5_USB0EPEN 0x00600000 // USB0EPEN on PC5 +#define GPIO_PCTL_PC5_EPI0S3 0x00800000 // EPI0S3 on PC5 +#define GPIO_PCTL_PC6_M 0x0F000000 // PC6 mask +#define GPIO_PCTL_PC6_CCP3 0x01000000 // CCP3 on PC6 +#define GPIO_PCTL_PC6_PHB0 0x02000000 // PHB0 on PC6 +#define GPIO_PCTL_PC6_C2O 0x03000000 // C2O on PC6 +#define GPIO_PCTL_PC6_PWM7 0x04000000 // PWM7 on PC6 +#define GPIO_PCTL_PC6_U1RX 0x05000000 // U1RX on PC6 +#define GPIO_PCTL_PC6_CCP0 0x06000000 // CCP0 on PC6 +#define GPIO_PCTL_PC6_USB0PFLT 0x07000000 // USB0PFLT on PC6 +#define GPIO_PCTL_PC6_EPI0S4 0x08000000 // EPI0S4 on PC6 +#define GPIO_PCTL_PC7_M 0xF0000000 // PC7 mask +#define GPIO_PCTL_PC7_CCP4 0x10000000 // CCP4 on PC7 +#define GPIO_PCTL_PC7_PHB0 0x20000000 // PHB0 on PC7 +#define GPIO_PCTL_PC7_CCP0 0x40000000 // CCP0 on PC7 +#define GPIO_PCTL_PC7_U1TX 0x50000000 // U1TX on PC7 +#define GPIO_PCTL_PC7_USB0PFLT 0x60000000 // USB0PFLT on PC7 +#define GPIO_PCTL_PC7_C1O 0x70000000 // C1O on PC7 +#define GPIO_PCTL_PC7_EPI0S5 0x80000000 // EPI0S5 on PC7 + +//***************************************************************************** +// +// The following are defines for the bit fields in the GPIO_PCTL register for +// port D. +// +//***************************************************************************** +#define GPIO_PCTL_PD0_M 0x0000000F // PD0 mask +#define GPIO_PCTL_PD0_PWM0 0x00000001 // PWM0 on PD0 +#define GPIO_PCTL_PD0_CAN0RX 0x00000002 // CAN0RX on PD0 +#define GPIO_PCTL_PD0_IDX0 0x00000003 // IDX0 on PD0 +#define GPIO_PCTL_PD0_U2RX 0x00000004 // U2RX on PD0 +#define GPIO_PCTL_PD0_U1RX 0x00000005 // U1RX on PD0 +#define GPIO_PCTL_PD0_CCP6 0x00000006 // CCP6 on PD0 +#define GPIO_PCTL_PD0_I2S0RXSCK 0x00000008 // I2S0RXSCK on PD0 +#define GPIO_PCTL_PD0_U1CTS 0x00000009 // U1CTS on PD0 +#define GPIO_PCTL_PD1_M 0x000000F0 // PD1 mask +#define GPIO_PCTL_PD1_PWM1 0x00000010 // PWM1 on PD1 +#define GPIO_PCTL_PD1_CAN0TX 0x00000020 // CAN0TX on PD1 +#define GPIO_PCTL_PD1_PHA0 0x00000030 // PHA0 on PD1 +#define GPIO_PCTL_PD1_U2TX 0x00000040 // U2TX on PD1 +#define GPIO_PCTL_PD1_U1TX 0x00000050 // U1TX on PD1 +#define GPIO_PCTL_PD1_CCP7 0x00000060 // CCP7 on PD1 +#define GPIO_PCTL_PD1_I2S0RXWS 0x00000080 // I2S0RXWS on PD1 +#define GPIO_PCTL_PD1_U1DCD 0x00000090 // U1DCD on PD1 +#define GPIO_PCTL_PD1_CCP2 0x000000A0 // CCP2 on PD1 +#define GPIO_PCTL_PD1_PHB1 0x000000B0 // PHB1 on PD1 +#define GPIO_PCTL_PD2_M 0x00000F00 // PD2 mask +#define GPIO_PCTL_PD2_U1RX 0x00000100 // U1RX on PD2 +#define GPIO_PCTL_PD2_CCP6 0x00000200 // CCP6 on PD2 +#define GPIO_PCTL_PD2_PWM2 0x00000300 // PWM2 on PD2 +#define GPIO_PCTL_PD2_CCP5 0x00000400 // CCP5 on PD2 +#define GPIO_PCTL_PD2_EPI0S20 0x00000800 // EPI0S20 on PD2 +#define GPIO_PCTL_PD3_M 0x0000F000 // PD3 mask +#define GPIO_PCTL_PD3_U1TX 0x00001000 // U1TX on PD3 +#define GPIO_PCTL_PD3_CCP7 0x00002000 // CCP7 on PD3 +#define GPIO_PCTL_PD3_PWM3 0x00003000 // PWM3 on PD3 +#define GPIO_PCTL_PD3_CCP0 0x00004000 // CCP0 on PD3 +#define GPIO_PCTL_PD3_EPI0S21 0x00008000 // EPI0S21 on PD3 +#define GPIO_PCTL_PD4_M 0x000F0000 // PD4 mask +#define GPIO_PCTL_PD4_CCP0 0x00010000 // CCP0 on PD4 +#define GPIO_PCTL_PD4_CCP3 0x00020000 // CCP3 on PD4 +#define GPIO_PCTL_PD4_I2S0RXSD 0x00080000 // I2S0RXSD on PD4 +#define GPIO_PCTL_PD4_U1RI 0x00090000 // U1RI on PD4 +#define GPIO_PCTL_PD4_EPI0S19 0x000A0000 // EPI0S19 on PD4 +#define GPIO_PCTL_PD5_M 0x00F00000 // PD5 mask +#define GPIO_PCTL_PD5_CCP2 0x00100000 // CCP2 on PD5 +#define GPIO_PCTL_PD5_CCP4 0x00200000 // CCP4 on PD5 +#define GPIO_PCTL_PD5_I2S0RXMCLK \ + 0x00800000 // I2S0RXMCLK on PD5 +#define GPIO_PCTL_PD5_U2RX 0x00900000 // U2RX on PD5 +#define GPIO_PCTL_PD5_EPI0S28 0x00A00000 // EPI0S28 on PD5 +#define GPIO_PCTL_PD6_M 0x0F000000 // PD6 mask +#define GPIO_PCTL_PD6_FAULT0 0x01000000 // FAULT0 on PD6 +#define GPIO_PCTL_PD6_I2S0TXSCK 0x08000000 // I2S0TXSCK on PD6 +#define GPIO_PCTL_PD6_U2TX 0x09000000 // U2TX on PD6 +#define GPIO_PCTL_PD6_EPI0S29 0x0A000000 // EPI0S29 on PD6 +#define GPIO_PCTL_PD7_M 0xF0000000 // PD7 mask +#define GPIO_PCTL_PD7_IDX0 0x10000000 // IDX0 on PD7 +#define GPIO_PCTL_PD7_C0O 0x20000000 // C0O on PD7 +#define GPIO_PCTL_PD7_CCP1 0x30000000 // CCP1 on PD7 +#define GPIO_PCTL_PD7_I2S0TXWS 0x80000000 // I2S0TXWS on PD7 +#define GPIO_PCTL_PD7_U1DTR 0x90000000 // U1DTR on PD7 +#define GPIO_PCTL_PD7_EPI0S30 0xA0000000 // EPI0S30 on PD7 + +//***************************************************************************** +// +// The following are defines for the bit fields in the GPIO_PCTL register for +// port E. +// +//***************************************************************************** +#define GPIO_PCTL_PE0_M 0x0000000F // PE0 mask +#define GPIO_PCTL_PE0_PWM4 0x00000001 // PWM4 on PE0 +#define GPIO_PCTL_PE0_SSI1CLK 0x00000002 // SSI1CLK on PE0 +#define GPIO_PCTL_PE0_CCP3 0x00000003 // CCP3 on PE0 +#define GPIO_PCTL_PE0_EPI0S8 0x00000008 // EPI0S8 on PE0 +#define GPIO_PCTL_PE0_USB0PFLT 0x00000009 // USB0PFLT on PE0 +#define GPIO_PCTL_PE1_M 0x000000F0 // PE1 mask +#define GPIO_PCTL_PE1_PWM5 0x00000010 // PWM5 on PE1 +#define GPIO_PCTL_PE1_SSI1FSS 0x00000020 // SSI1FSS on PE1 +#define GPIO_PCTL_PE1_FAULT0 0x00000030 // FAULT0 on PE1 +#define GPIO_PCTL_PE1_CCP2 0x00000040 // CCP2 on PE1 +#define GPIO_PCTL_PE1_CCP6 0x00000050 // CCP6 on PE1 +#define GPIO_PCTL_PE1_EPI0S9 0x00000080 // EPI0S9 on PE1 +#define GPIO_PCTL_PE2_M 0x00000F00 // PE2 mask +#define GPIO_PCTL_PE2_CCP4 0x00000100 // CCP4 on PE2 +#define GPIO_PCTL_PE2_SSI1RX 0x00000200 // SSI1RX on PE2 +#define GPIO_PCTL_PE2_PHB1 0x00000300 // PHB1 on PE2 +#define GPIO_PCTL_PE2_PHA0 0x00000400 // PHA0 on PE2 +#define GPIO_PCTL_PE2_CCP2 0x00000500 // CCP2 on PE2 +#define GPIO_PCTL_PE2_EPI0S24 0x00000800 // EPI0S24 on PE2 +#define GPIO_PCTL_PE3_M 0x0000F000 // PE3 mask +#define GPIO_PCTL_PE3_CCP1 0x00001000 // CCP1 on PE3 +#define GPIO_PCTL_PE3_SSI1TX 0x00002000 // SSI1TX on PE3 +#define GPIO_PCTL_PE3_PHA1 0x00003000 // PHA1 on PE3 +#define GPIO_PCTL_PE3_PHB0 0x00004000 // PHB0 on PE3 +#define GPIO_PCTL_PE3_CCP7 0x00005000 // CCP7 on PE3 +#define GPIO_PCTL_PE3_EPI0S25 0x00008000 // EPI0S25 on PE3 +#define GPIO_PCTL_PE4_M 0x000F0000 // PE4 mask +#define GPIO_PCTL_PE4_CCP3 0x00010000 // CCP3 on PE4 +#define GPIO_PCTL_PE4_FAULT0 0x00040000 // FAULT0 on PE4 +#define GPIO_PCTL_PE4_U2TX 0x00050000 // U2TX on PE4 +#define GPIO_PCTL_PE4_CCP2 0x00060000 // CCP2 on PE4 +#define GPIO_PCTL_PE4_I2S0TXWS 0x00090000 // I2S0TXWS on PE4 +#define GPIO_PCTL_PE5_M 0x00F00000 // PE5 mask +#define GPIO_PCTL_PE5_CCP5 0x00100000 // CCP5 on PE5 +#define GPIO_PCTL_PE5_I2S0TXSD 0x00900000 // I2S0TXSD on PE5 +#define GPIO_PCTL_PE6_M 0x0F000000 // PE6 mask +#define GPIO_PCTL_PE6_PWM4 0x01000000 // PWM4 on PE6 +#define GPIO_PCTL_PE6_C1O 0x02000000 // C1O on PE6 +#define GPIO_PCTL_PE6_U1CTS 0x09000000 // U1CTS on PE6 +#define GPIO_PCTL_PE7_M 0xF0000000 // PE7 mask +#define GPIO_PCTL_PE7_PWM5 0x10000000 // PWM5 on PE7 +#define GPIO_PCTL_PE7_C2O 0x20000000 // C2O on PE7 +#define GPIO_PCTL_PE7_U1DCD 0x90000000 // U1DCD on PE7 + +//***************************************************************************** +// +// The following are defines for the bit fields in the GPIO_PCTL register for +// port F. +// +//***************************************************************************** +#define GPIO_PCTL_PF0_M 0x0000000F // PF0 mask +#define GPIO_PCTL_PF0_CAN1RX 0x00000001 // CAN1RX on PF0 +#define GPIO_PCTL_PF0_PHB0 0x00000002 // PHB0 on PF0 +#define GPIO_PCTL_PF0_PWM0 0x00000003 // PWM0 on PF0 +#define GPIO_PCTL_PF0_I2S0TXSD 0x00000008 // I2S0TXSD on PF0 +#define GPIO_PCTL_PF0_U1DSR 0x00000009 // U1DSR on PF0 +#define GPIO_PCTL_PF1_M 0x000000F0 // PF1 mask +#define GPIO_PCTL_PF1_CAN1TX 0x00000010 // CAN1TX on PF1 +#define GPIO_PCTL_PF1_IDX1 0x00000020 // IDX1 on PF1 +#define GPIO_PCTL_PF1_PWM1 0x00000030 // PWM1 on PF1 +#define GPIO_PCTL_PF1_I2S0TXMCLK \ + 0x00000080 // I2S0TXMCLK on PF1 +#define GPIO_PCTL_PF1_U1RTS 0x00000090 // U1RTS on PF1 +#define GPIO_PCTL_PF1_CCP3 0x000000A0 // CCP3 on PF1 +#define GPIO_PCTL_PF2_M 0x00000F00 // PF2 mask +#define GPIO_PCTL_PF2_LED1 0x00000100 // LED1 on PF2 +#define GPIO_PCTL_PF2_PWM4 0x00000200 // PWM4 on PF2 +#define GPIO_PCTL_PF2_PWM2 0x00000400 // PWM2 on PF2 +#define GPIO_PCTL_PF2_SSI1CLK 0x00000900 // SSI1CLK on PF2 +#define GPIO_PCTL_PF3_M 0x0000F000 // PF3 mask +#define GPIO_PCTL_PF3_LED0 0x00001000 // LED0 on PF3 +#define GPIO_PCTL_PF3_PWM5 0x00002000 // PWM5 on PF3 +#define GPIO_PCTL_PF3_PWM3 0x00004000 // PWM3 on PF3 +#define GPIO_PCTL_PF3_SSI1FSS 0x00009000 // SSI1FSS on PF3 +#define GPIO_PCTL_PF4_M 0x000F0000 // PF4 mask +#define GPIO_PCTL_PF4_CCP0 0x00010000 // CCP0 on PF4 +#define GPIO_PCTL_PF4_C0O 0x00020000 // C0O on PF4 +#define GPIO_PCTL_PF4_FAULT0 0x00040000 // FAULT0 on PF4 +#define GPIO_PCTL_PF4_EPI0S12 0x00080000 // EPI0S12 on PF4 +#define GPIO_PCTL_PF4_SSI1RX 0x00090000 // SSI1RX on PF4 +#define GPIO_PCTL_PF5_M 0x00F00000 // PF5 mask +#define GPIO_PCTL_PF5_CCP2 0x00100000 // CCP2 on PF5 +#define GPIO_PCTL_PF5_C1O 0x00200000 // C1O on PF5 +#define GPIO_PCTL_PF5_EPI0S15 0x00800000 // EPI0S15 on PF5 +#define GPIO_PCTL_PF5_SSI1TX 0x00900000 // SSI1TX on PF5 +#define GPIO_PCTL_PF6_M 0x0F000000 // PF6 mask +#define GPIO_PCTL_PF6_CCP1 0x01000000 // CCP1 on PF6 +#define GPIO_PCTL_PF6_C2O 0x02000000 // C2O on PF6 +#define GPIO_PCTL_PF6_PHA0 0x04000000 // PHA0 on PF6 +#define GPIO_PCTL_PF6_I2S0TXMCLK \ + 0x09000000 // I2S0TXMCLK on PF6 +#define GPIO_PCTL_PF6_U1RTS 0x0A000000 // U1RTS on PF6 +#define GPIO_PCTL_PF7_M 0xF0000000 // PF7 mask +#define GPIO_PCTL_PF7_CCP4 0x10000000 // CCP4 on PF7 +#define GPIO_PCTL_PF7_PHB0 0x40000000 // PHB0 on PF7 +#define GPIO_PCTL_PF7_EPI0S12 0x80000000 // EPI0S12 on PF7 +#define GPIO_PCTL_PF7_FAULT1 0x90000000 // FAULT1 on PF7 + +//***************************************************************************** +// +// The following are defines for the bit fields in the GPIO_PCTL register for +// port G. +// +//***************************************************************************** +#define GPIO_PCTL_PG0_M 0x0000000F // PG0 mask +#define GPIO_PCTL_PG0_U2RX 0x00000001 // U2RX on PG0 +#define GPIO_PCTL_PG0_PWM0 0x00000002 // PWM0 on PG0 +#define GPIO_PCTL_PG0_I2C1SCL 0x00000003 // I2C1SCL on PG0 +#define GPIO_PCTL_PG0_PWM4 0x00000004 // PWM4 on PG0 +#define GPIO_PCTL_PG0_USB0EPEN 0x00000007 // USB0EPEN on PG0 +#define GPIO_PCTL_PG0_EPI0S13 0x00000008 // EPI0S13 on PG0 +#define GPIO_PCTL_PG1_M 0x000000F0 // PG1 mask +#define GPIO_PCTL_PG1_U2TX 0x00000010 // U2TX on PG1 +#define GPIO_PCTL_PG1_PWM1 0x00000020 // PWM1 on PG1 +#define GPIO_PCTL_PG1_I2C1SDA 0x00000030 // I2C1SDA on PG1 +#define GPIO_PCTL_PG1_PWM5 0x00000040 // PWM5 on PG1 +#define GPIO_PCTL_PG1_EPI0S14 0x00000080 // EPI0S14 on PG1 +#define GPIO_PCTL_PG2_M 0x00000F00 // PG2 mask +#define GPIO_PCTL_PG2_PWM0 0x00000100 // PWM0 on PG2 +#define GPIO_PCTL_PG2_FAULT0 0x00000400 // FAULT0 on PG2 +#define GPIO_PCTL_PG2_IDX1 0x00000800 // IDX1 on PG2 +#define GPIO_PCTL_PG2_I2S0RXSD 0x00000900 // I2S0RXSD on PG2 +#define GPIO_PCTL_PG3_M 0x0000F000 // PG3 mask +#define GPIO_PCTL_PG3_PWM1 0x00001000 // PWM1 on PG3 +#define GPIO_PCTL_PG3_FAULT2 0x00004000 // FAULT2 on PG3 +#define GPIO_PCTL_PG3_FAULT0 0x00008000 // FAULT0 on PG3 +#define GPIO_PCTL_PG3_I2S0RXMCLK \ + 0x00009000 // I2S0RXMCLK on PG3 +#define GPIO_PCTL_PG4_M 0x000F0000 // PG4 mask +#define GPIO_PCTL_PG4_CCP3 0x00010000 // CCP3 on PG4 +#define GPIO_PCTL_PG4_FAULT1 0x00040000 // FAULT1 on PG4 +#define GPIO_PCTL_PG4_EPI0S15 0x00080000 // EPI0S15 on PG4 +#define GPIO_PCTL_PG4_PWM6 0x00090000 // PWM6 on PG4 +#define GPIO_PCTL_PG4_U1RI 0x000A0000 // U1RI on PG4 +#define GPIO_PCTL_PG5_M 0x00F00000 // PG5 mask +#define GPIO_PCTL_PG5_CCP5 0x00100000 // CCP5 on PG5 +#define GPIO_PCTL_PG5_IDX0 0x00400000 // IDX0 on PG5 +#define GPIO_PCTL_PG5_FAULT1 0x00500000 // FAULT1 on PG5 +#define GPIO_PCTL_PG5_PWM7 0x00800000 // PWM7 on PG5 +#define GPIO_PCTL_PG5_I2S0RXSCK 0x00900000 // I2S0RXSCK on PG5 +#define GPIO_PCTL_PG5_U1DTR 0x00A00000 // U1DTR on PG5 +#define GPIO_PCTL_PG6_M 0x0F000000 // PG6 mask +#define GPIO_PCTL_PG6_PHA1 0x01000000 // PHA1 on PG6 +#define GPIO_PCTL_PG6_PWM6 0x04000000 // PWM6 on PG6 +#define GPIO_PCTL_PG6_FAULT1 0x08000000 // FAULT1 on PG6 +#define GPIO_PCTL_PG6_I2S0RXWS 0x09000000 // I2S0RXWS on PG6 +#define GPIO_PCTL_PG6_U1RI 0x0A000000 // U1RI on PG6 +#define GPIO_PCTL_PG7_M 0xF0000000 // PG7 mask +#define GPIO_PCTL_PG7_PHB1 0x10000000 // PHB1 on PG7 +#define GPIO_PCTL_PG7_PWM7 0x40000000 // PWM7 on PG7 +#define GPIO_PCTL_PG7_CCP5 0x80000000 // CCP5 on PG7 +#define GPIO_PCTL_PG7_EPI0S31 0x90000000 // EPI0S31 on PG7 + +//***************************************************************************** +// +// The following are defines for the bit fields in the GPIO_PCTL register for +// port H. +// +//***************************************************************************** +#define GPIO_PCTL_PH0_M 0x0000000F // PH0 mask +#define GPIO_PCTL_PH0_CCP6 0x00000001 // CCP6 on PH0 +#define GPIO_PCTL_PH0_PWM2 0x00000002 // PWM2 on PH0 +#define GPIO_PCTL_PH0_EPI0S6 0x00000008 // EPI0S6 on PH0 +#define GPIO_PCTL_PH0_PWM4 0x00000009 // PWM4 on PH0 +#define GPIO_PCTL_PH1_M 0x000000F0 // PH1 mask +#define GPIO_PCTL_PH1_CCP7 0x00000010 // CCP7 on PH1 +#define GPIO_PCTL_PH1_PWM3 0x00000020 // PWM3 on PH1 +#define GPIO_PCTL_PH1_EPI0S7 0x00000080 // EPI0S7 on PH1 +#define GPIO_PCTL_PH1_PWM5 0x00000090 // PWM5 on PH1 +#define GPIO_PCTL_PH2_M 0x00000F00 // PH2 mask +#define GPIO_PCTL_PH2_IDX1 0x00000100 // IDX1 on PH2 +#define GPIO_PCTL_PH2_C1O 0x00000200 // C1O on PH2 +#define GPIO_PCTL_PH2_FAULT3 0x00000400 // FAULT3 on PH2 +#define GPIO_PCTL_PH2_EPI0S1 0x00000800 // EPI0S1 on PH2 +#define GPIO_PCTL_PH3_M 0x0000F000 // PH3 mask +#define GPIO_PCTL_PH3_PHB0 0x00001000 // PHB0 on PH3 +#define GPIO_PCTL_PH3_FAULT0 0x00002000 // FAULT0 on PH3 +#define GPIO_PCTL_PH3_USB0EPEN 0x00004000 // USB0EPEN on PH3 +#define GPIO_PCTL_PH3_EPI0S0 0x00008000 // EPI0S0 on PH3 +#define GPIO_PCTL_PH4_M 0x000F0000 // PH4 mask +#define GPIO_PCTL_PH4_USB0PFLT 0x00040000 // USB0PFLT on PH4 +#define GPIO_PCTL_PH4_EPI0S10 0x00080000 // EPI0S10 on PH4 +#define GPIO_PCTL_PH4_SSI1CLK 0x000B0000 // SSI1CLK on PH4 +#define GPIO_PCTL_PH5_M 0x00F00000 // PH5 mask +#define GPIO_PCTL_PH5_EPI0S11 0x00800000 // EPI0S11 on PH5 +#define GPIO_PCTL_PH5_FAULT2 0x00A00000 // FAULT2 on PH5 +#define GPIO_PCTL_PH5_SSI1FSS 0x00B00000 // SSI1FSS on PH5 +#define GPIO_PCTL_PH6_M 0x0F000000 // PH6 mask +#define GPIO_PCTL_PH6_EPI0S26 0x08000000 // EPI0S26 on PH6 +#define GPIO_PCTL_PH6_PWM4 0x0A000000 // PWM4 on PH6 +#define GPIO_PCTL_PH6_SSI1RX 0x0B000000 // SSI1RX on PH6 +#define GPIO_PCTL_PH7_M 0xF0000000 // PH7 mask +#define GPIO_PCTL_PH7_EPI0S27 0x80000000 // EPI0S27 on PH7 +#define GPIO_PCTL_PH7_PWM5 0xA0000000 // PWM5 on PH7 +#define GPIO_PCTL_PH7_SSI1TX 0xB0000000 // SSI1TX on PH7 + +//***************************************************************************** +// +// The following are defines for the bit fields in the GPIO_PCTL register for +// port J. +// +//***************************************************************************** +#define GPIO_PCTL_PJ0_M 0x0000000F // PJ0 mask +#define GPIO_PCTL_PJ0_EPI0S16 0x00000008 // EPI0S16 on PJ0 +#define GPIO_PCTL_PJ0_PWM0 0x0000000A // PWM0 on PJ0 +#define GPIO_PCTL_PJ0_I2C1SCL 0x0000000B // I2C1SCL on PJ0 +#define GPIO_PCTL_PJ1_M 0x000000F0 // PJ1 mask +#define GPIO_PCTL_PJ1_EPI0S17 0x00000080 // EPI0S17 on PJ1 +#define GPIO_PCTL_PJ1_USB0PFLT 0x00000090 // USB0PFLT on PJ1 +#define GPIO_PCTL_PJ1_PWM1 0x000000A0 // PWM1 on PJ1 +#define GPIO_PCTL_PJ1_I2C1SDA 0x000000B0 // I2C1SDA on PJ1 +#define GPIO_PCTL_PJ2_M 0x00000F00 // PJ2 mask +#define GPIO_PCTL_PJ2_EPI0S18 0x00000800 // EPI0S18 on PJ2 +#define GPIO_PCTL_PJ2_CCP0 0x00000900 // CCP0 on PJ2 +#define GPIO_PCTL_PJ2_FAULT0 0x00000A00 // FAULT0 on PJ2 +#define GPIO_PCTL_PJ3_M 0x0000F000 // PJ3 mask +#define GPIO_PCTL_PJ3_EPI0S19 0x00008000 // EPI0S19 on PJ3 +#define GPIO_PCTL_PJ3_U1CTS 0x00009000 // U1CTS on PJ3 +#define GPIO_PCTL_PJ3_CCP6 0x0000A000 // CCP6 on PJ3 +#define GPIO_PCTL_PJ4_M 0x000F0000 // PJ4 mask +#define GPIO_PCTL_PJ4_EPI0S28 0x00080000 // EPI0S28 on PJ4 +#define GPIO_PCTL_PJ4_U1DCD 0x00090000 // U1DCD on PJ4 +#define GPIO_PCTL_PJ4_CCP4 0x000A0000 // CCP4 on PJ4 +#define GPIO_PCTL_PJ5_M 0x00F00000 // PJ5 mask +#define GPIO_PCTL_PJ5_EPI0S29 0x00800000 // EPI0S29 on PJ5 +#define GPIO_PCTL_PJ5_U1DSR 0x00900000 // U1DSR on PJ5 +#define GPIO_PCTL_PJ5_CCP2 0x00A00000 // CCP2 on PJ5 +#define GPIO_PCTL_PJ6_M 0x0F000000 // PJ6 mask +#define GPIO_PCTL_PJ6_EPI0S30 0x08000000 // EPI0S30 on PJ6 +#define GPIO_PCTL_PJ6_U1RTS 0x09000000 // U1RTS on PJ6 +#define GPIO_PCTL_PJ6_CCP1 0x0A000000 // CCP1 on PJ6 +#define GPIO_PCTL_PJ7_M 0xF0000000 // PJ7 mask +#define GPIO_PCTL_PJ7_U1DTR 0x90000000 // U1DTR on PJ7 +#define GPIO_PCTL_PJ7_CCP0 0xA0000000 // CCP0 on PJ7 + +//***************************************************************************** +// +// The following definitions are deprecated. +// +//***************************************************************************** +#ifndef DEPRECATED + +//***************************************************************************** +// +// The following are deprecated defines for the GPIO register offsets. +// +//***************************************************************************** +#define GPIO_O_PeriphID4 0x00000FD0 +#define GPIO_O_PeriphID5 0x00000FD4 +#define GPIO_O_PeriphID6 0x00000FD8 +#define GPIO_O_PeriphID7 0x00000FDC +#define GPIO_O_PeriphID0 0x00000FE0 +#define GPIO_O_PeriphID1 0x00000FE4 +#define GPIO_O_PeriphID2 0x00000FE8 +#define GPIO_O_PeriphID3 0x00000FEC +#define GPIO_O_PCellID0 0x00000FF0 +#define GPIO_O_PCellID1 0x00000FF4 +#define GPIO_O_PCellID2 0x00000FF8 +#define GPIO_O_PCellID3 0x00000FFC + +//***************************************************************************** +// +// The following are deprecated defines for the GPIO Register reset values. +// +//***************************************************************************** +#define GPIO_RV_DEN 0x000000FF // Digital input enable reg RV +#define GPIO_RV_PUR 0x000000FF // Pull up select reg RV +#define GPIO_RV_DR2R 0x000000FF // 2ma drive select reg RV +#define GPIO_RV_PCellID1 0x000000F0 +#define GPIO_RV_PCellID3 0x000000B1 +#define GPIO_RV_PeriphID0 0x00000061 +#define GPIO_RV_PeriphID1 0x00000010 +#define GPIO_RV_PCellID0 0x0000000D +#define GPIO_RV_PCellID2 0x00000005 +#define GPIO_RV_PeriphID2 0x00000004 +#define GPIO_RV_LOCK 0x00000001 // Lock register RV +#define GPIO_RV_PeriphID7 0x00000000 +#define GPIO_RV_PDR 0x00000000 // Pull down select reg RV +#define GPIO_RV_IC 0x00000000 // Interrupt clear reg RV +#define GPIO_RV_SLR 0x00000000 // Slew rate control enable reg RV +#define GPIO_RV_ODR 0x00000000 // Open drain select reg RV +#define GPIO_RV_IBE 0x00000000 // Interrupt both edges reg RV +#define GPIO_RV_AFSEL 0x00000000 // Mode control select reg RV +#define GPIO_RV_IS 0x00000000 // Interrupt sense reg RV +#define GPIO_RV_IM 0x00000000 // Interrupt mask reg RV +#define GPIO_RV_PeriphID4 0x00000000 +#define GPIO_RV_PeriphID5 0x00000000 +#define GPIO_RV_DR8R 0x00000000 // 8ma drive select reg RV +#define GPIO_RV_RIS 0x00000000 // Raw interrupt status reg RV +#define GPIO_RV_DR4R 0x00000000 // 4ma drive select reg RV +#define GPIO_RV_IEV 0x00000000 // Intterupt event reg RV +#define GPIO_RV_DIR 0x00000000 // Data direction reg RV +#define GPIO_RV_PeriphID6 0x00000000 +#define GPIO_RV_PeriphID3 0x00000000 +#define GPIO_RV_DATA 0x00000000 // Data register reset value +#define GPIO_RV_MIS 0x00000000 // Masked interrupt status reg RV + +#endif + +#endif // __HW_GPIO_H__ diff --git a/bsp/lm3s_9b9x/Libraries/inc/hw_hibernate.h b/bsp/lm3s_9b9x/Libraries/inc/hw_hibernate.h new file mode 100644 index 0000000000000000000000000000000000000000..39a07e8a6be8a5f2fc2296bfb4d876537f7cf4fd --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/inc/hw_hibernate.h @@ -0,0 +1,242 @@ +//***************************************************************************** +// +// hw_hibernate.h - Defines and Macros for the Hibernation module. +// +// Copyright (c) 2007-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_HIBERNATE_H__ +#define __HW_HIBERNATE_H__ + +//***************************************************************************** +// +// The following are defines for the Hibernation module register addresses. +// +//***************************************************************************** +#define HIB_RTCC 0x400FC000 // Hibernation RTC Counter +#define HIB_RTCM0 0x400FC004 // Hibernation RTC Match 0 +#define HIB_RTCM1 0x400FC008 // Hibernation RTC Match 1 +#define HIB_RTCLD 0x400FC00C // Hibernation RTC Load +#define HIB_CTL 0x400FC010 // Hibernation Control +#define HIB_IM 0x400FC014 // Hibernation Interrupt Mask +#define HIB_RIS 0x400FC018 // Hibernation Raw Interrupt Status +#define HIB_MIS 0x400FC01C // Hibernation Masked Interrupt + // Status +#define HIB_IC 0x400FC020 // Hibernation Interrupt Clear +#define HIB_RTCT 0x400FC024 // Hibernation RTC Trim +#define HIB_DATA 0x400FC030 // Hibernation Data + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_RTCC register. +// +//***************************************************************************** +#define HIB_RTCC_M 0xFFFFFFFF // RTC Counter +#define HIB_RTCC_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_RTCM0 register. +// +//***************************************************************************** +#define HIB_RTCM0_M 0xFFFFFFFF // RTC Match 0 +#define HIB_RTCM0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_RTCM1 register. +// +//***************************************************************************** +#define HIB_RTCM1_M 0xFFFFFFFF // RTC Match 1 +#define HIB_RTCM1_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_RTCLD register. +// +//***************************************************************************** +#define HIB_RTCLD_M 0xFFFFFFFF // RTC Load +#define HIB_RTCLD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_CTL register. +// +//***************************************************************************** +#define HIB_CTL_WRC 0x80000000 // Write Complete/Capable +#define HIB_CTL_VDD3ON 0x00000100 // VDD Powered +#define HIB_CTL_VABORT 0x00000080 // Power Cut Abort Enable +#define HIB_CTL_CLK32EN 0x00000040 // Clocking Enable +#define HIB_CTL_LOWBATEN 0x00000020 // Low Battery Monitoring Enable +#define HIB_CTL_PINWEN 0x00000010 // External WAKE Pin Enable +#define HIB_CTL_RTCWEN 0x00000008 // RTC Wake-up Enable +#define HIB_CTL_CLKSEL 0x00000004 // Hibernation Module Clock Select +#define HIB_CTL_HIBREQ 0x00000002 // Hibernation Request +#define HIB_CTL_RTCEN 0x00000001 // RTC Timer Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_IM register. +// +//***************************************************************************** +#define HIB_IM_EXTW 0x00000008 // External Wake-Up Interrupt Mask +#define HIB_IM_LOWBAT 0x00000004 // Low Battery Voltage Interrupt + // Mask +#define HIB_IM_RTCALT1 0x00000002 // RTC Alert 1 Interrupt Mask +#define HIB_IM_RTCALT0 0x00000001 // RTC Alert 0 Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_RIS register. +// +//***************************************************************************** +#define HIB_RIS_EXTW 0x00000008 // External Wake-Up Raw Interrupt + // Status +#define HIB_RIS_LOWBAT 0x00000004 // Low Battery Voltage Raw + // Interrupt Status +#define HIB_RIS_RTCALT1 0x00000002 // RTC Alert 1 Raw Interrupt Status +#define HIB_RIS_RTCALT0 0x00000001 // RTC Alert 0 Raw Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_MIS register. +// +//***************************************************************************** +#define HIB_MIS_EXTW 0x00000008 // External Wake-Up Masked + // Interrupt Status +#define HIB_MIS_LOWBAT 0x00000004 // Low Battery Voltage Masked + // Interrupt Status +#define HIB_MIS_RTCALT1 0x00000002 // RTC Alert 1 Masked Interrupt + // Status +#define HIB_MIS_RTCALT0 0x00000001 // RTC Alert 0 Masked Interrupt + // Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_IC register. +// +//***************************************************************************** +#define HIB_IC_EXTW 0x00000008 // External Wake-Up Masked + // Interrupt Clear +#define HIB_IC_LOWBAT 0x00000004 // Low Battery Voltage Masked + // Interrupt Clear +#define HIB_IC_RTCALT1 0x00000002 // RTC Alert1 Masked Interrupt + // Clear +#define HIB_IC_RTCALT0 0x00000001 // RTC Alert0 Masked Interrupt + // Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_RTCT register. +// +//***************************************************************************** +#define HIB_RTCT_TRIM_M 0x0000FFFF // RTC Trim Value +#define HIB_RTCT_TRIM_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_DATA register. +// +//***************************************************************************** +#define HIB_DATA_RTD_M 0xFFFFFFFF // Hibernation Module NV Data +#define HIB_DATA_RTD_S 0 + +//***************************************************************************** +// +// The following definitions are deprecated. +// +//***************************************************************************** +#ifndef DEPRECATED + +//***************************************************************************** +// +// The following are deprecated defines for the Hibernation module register +// addresses. +// +//***************************************************************************** +#define HIB_DATA_END 0x400FC130 // end of data area, exclusive + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the HIB_RTCC +// register. +// +//***************************************************************************** +#define HIB_RTCC_MASK 0xFFFFFFFF // RTC counter mask + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the HIB_RTCM0 +// register. +// +//***************************************************************************** +#define HIB_RTCM0_MASK 0xFFFFFFFF // RTC match 0 mask + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the HIB_RTCM1 +// register. +// +//***************************************************************************** +#define HIB_RTCM1_MASK 0xFFFFFFFF // RTC match 1 mask + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the HIB_RTCLD +// register. +// +//***************************************************************************** +#define HIB_RTCLD_MASK 0xFFFFFFFF // RTC load mask + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the HIB_RIS +// register. +// +//***************************************************************************** +#define HIB_RID_RTCALT0 0x00000001 // RTC match 0 interrupt + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the HIB_MIS +// register. +// +//***************************************************************************** +#define HIB_MID_RTCALT0 0x00000001 // RTC match 0 interrupt + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the HIB_RTCT +// register. +// +//***************************************************************************** +#define HIB_RTCT_MASK 0x0000FFFF // RTC trim mask + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the HIB_DATA +// register. +// +//***************************************************************************** +#define HIB_DATA_MASK 0xFFFFFFFF // NV memory data mask + +#endif + +#endif // __HW_HIBERNATE_H__ diff --git a/bsp/lm3s_9b9x/Libraries/inc/hw_i2c.h b/bsp/lm3s_9b9x/Libraries/inc/hw_i2c.h new file mode 100644 index 0000000000000000000000000000000000000000..22368b17370479a73d414d082906b17852f12454 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/inc/hw_i2c.h @@ -0,0 +1,407 @@ +//***************************************************************************** +// +// hw_i2c.h - Macros used when accessing the I2C master and slave hardware. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_I2C_H__ +#define __HW_I2C_H__ + +//***************************************************************************** +// +// The following are defines for the I2C register offsets. +// +//***************************************************************************** +#define I2C_O_MSA 0x00000000 // I2C Master Slave Address +#define I2C_O_SOAR 0x00000000 // I2C Slave Own Address +#define I2C_O_SCSR 0x00000004 // I2C Slave Control/Status +#define I2C_O_MCS 0x00000004 // I2C Master Control/Status +#define I2C_O_SDR 0x00000008 // I2C Slave Data +#define I2C_O_MDR 0x00000008 // I2C Master Data +#define I2C_O_MTPR 0x0000000C // I2C Master Timer Period +#define I2C_O_SIMR 0x0000000C // I2C Slave Interrupt Mask +#define I2C_O_SRIS 0x00000010 // I2C Slave Raw Interrupt Status +#define I2C_O_MIMR 0x00000010 // I2C Master Interrupt Mask +#define I2C_O_MRIS 0x00000014 // I2C Master Raw Interrupt Status +#define I2C_O_SMIS 0x00000014 // I2C Slave Masked Interrupt + // Status +#define I2C_O_SICR 0x00000018 // I2C Slave Interrupt Clear +#define I2C_O_MMIS 0x00000018 // I2C Master Masked Interrupt + // Status +#define I2C_O_MICR 0x0000001C // I2C Master Interrupt Clear +#define I2C_O_MCR 0x00000020 // I2C Master Configuration + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MSA register. +// +//***************************************************************************** +#define I2C_MSA_SA_M 0x000000FE // I2C Slave Address +#define I2C_MSA_RS 0x00000001 // Receive not send +#define I2C_MSA_SA_S 1 + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_SOAR register. +// +//***************************************************************************** +#define I2C_SOAR_OAR_M 0x0000007F // I2C Slave Own Address +#define I2C_SOAR_OAR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_SCSR register. +// +//***************************************************************************** +#define I2C_SCSR_FBR 0x00000004 // First Byte Received +#define I2C_SCSR_TREQ 0x00000002 // Transmit Request +#define I2C_SCSR_DA 0x00000001 // Device Active +#define I2C_SCSR_RREQ 0x00000001 // Receive Request + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MCS register. +// +//***************************************************************************** +#define I2C_MCS_BUSBSY 0x00000040 // Bus Busy +#define I2C_MCS_IDLE 0x00000020 // I2C Idle +#define I2C_MCS_ARBLST 0x00000010 // Arbitration Lost +#define I2C_MCS_ACK 0x00000008 // Data Acknowledge Enable +#define I2C_MCS_DATACK 0x00000008 // Acknowledge Data +#define I2C_MCS_ADRACK 0x00000004 // Acknowledge Address +#define I2C_MCS_STOP 0x00000004 // Generate STOP +#define I2C_MCS_START 0x00000002 // Generate START +#define I2C_MCS_ERROR 0x00000002 // Error +#define I2C_MCS_RUN 0x00000001 // I2C Master Enable +#define I2C_MCS_BUSY 0x00000001 // I2C Busy + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_SDR register. +// +//***************************************************************************** +#define I2C_SDR_DATA_M 0x000000FF // Data for Transfer +#define I2C_SDR_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MDR register. +// +//***************************************************************************** +#define I2C_MDR_DATA_M 0x000000FF // Data Transferred +#define I2C_MDR_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MTPR register. +// +//***************************************************************************** +#define I2C_MTPR_TPR_M 0x0000007F // SCL Clock Period +#define I2C_MTPR_TPR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_SIMR register. +// +//***************************************************************************** +#define I2C_SIMR_STOPIM 0x00000004 // Stop Condition Interrupt Mask +#define I2C_SIMR_STARTIM 0x00000002 // Start Condition Interrupt Mask +#define I2C_SIMR_DATAIM 0x00000001 // Data Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_SRIS register. +// +//***************************************************************************** +#define I2C_SRIS_STOPRIS 0x00000004 // Stop Condition Raw Interrupt + // Status +#define I2C_SRIS_STARTRIS 0x00000002 // Start Condition Raw Interrupt + // Status +#define I2C_SRIS_DATARIS 0x00000001 // Data Raw Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MIMR register. +// +//***************************************************************************** +#define I2C_MIMR_IM 0x00000001 // Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MRIS register. +// +//***************************************************************************** +#define I2C_MRIS_RIS 0x00000001 // Raw Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_SMIS register. +// +//***************************************************************************** +#define I2C_SMIS_STOPMIS 0x00000004 // Stop Condition Masked Interrupt + // Status +#define I2C_SMIS_STARTMIS 0x00000002 // Start Condition Masked Interrupt + // Status +#define I2C_SMIS_DATAMIS 0x00000001 // Data Masked Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_SICR register. +// +//***************************************************************************** +#define I2C_SICR_STOPIC 0x00000004 // Stop Condition Interrupt Clear +#define I2C_SICR_STARTIC 0x00000002 // Start Condition Interrupt Clear +#define I2C_SICR_DATAIC 0x00000001 // Data Interrupt Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MMIS register. +// +//***************************************************************************** +#define I2C_MMIS_MIS 0x00000001 // Masked Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MICR register. +// +//***************************************************************************** +#define I2C_MICR_IC 0x00000001 // Interrupt Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MCR register. +// +//***************************************************************************** +#define I2C_MCR_SFE 0x00000020 // I2C Slave Function Enable +#define I2C_MCR_MFE 0x00000010 // I2C Master Function Enable +#define I2C_MCR_LPBK 0x00000001 // I2C Loopback + +//***************************************************************************** +// +// The following definitions are deprecated. +// +//***************************************************************************** +#ifndef DEPRECATED + +//***************************************************************************** +// +// The following are deprecated defines for the I2C register offsets. +// +//***************************************************************************** +#define I2C_O_SLAVE 0x00000800 // Offset from master to slave + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the I2C_O_SIMR +// register. +// +//***************************************************************************** +#define I2C_SIMR_IM 0x00000001 // Interrupt Mask + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the I2C_O_SRIS +// register. +// +//***************************************************************************** +#define I2C_SRIS_RIS 0x00000001 // Raw Interrupt Status + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the I2C_O_SMIS +// register. +// +//***************************************************************************** +#define I2C_SMIS_MIS 0x00000001 // Masked Interrupt Status + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the I2C_O_SICR +// register. +// +//***************************************************************************** +#define I2C_SICR_IC 0x00000001 // Clear Interrupt + +//***************************************************************************** +// +// The following are deprecated defines for the I2C master register offsets. +// +//***************************************************************************** +#define I2C_MASTER_O_SA 0x00000000 // Slave address register +#define I2C_MASTER_O_CS 0x00000004 // Control and Status register +#define I2C_MASTER_O_DR 0x00000008 // Data register +#define I2C_MASTER_O_TPR 0x0000000C // Timer period register +#define I2C_MASTER_O_IMR 0x00000010 // Interrupt mask register +#define I2C_MASTER_O_RIS 0x00000014 // Raw interrupt status register +#define I2C_MASTER_O_MIS 0x00000018 // Masked interrupt status reg +#define I2C_MASTER_O_MICR 0x0000001C // Interrupt clear register +#define I2C_MASTER_O_CR 0x00000020 // Configuration register + +//***************************************************************************** +// +// The following are deprecated defines for the I2C slave register offsets. +// +//***************************************************************************** +#define I2C_SLAVE_O_SICR 0x00000018 // Interrupt clear register +#define I2C_SLAVE_O_MIS 0x00000014 // Masked interrupt status reg +#define I2C_SLAVE_O_RIS 0x00000010 // Raw interrupt status register +#define I2C_SLAVE_O_IM 0x0000000C // Interrupt mask register +#define I2C_SLAVE_O_DR 0x00000008 // Data register +#define I2C_SLAVE_O_CSR 0x00000004 // Control/Status register +#define I2C_SLAVE_O_OAR 0x00000000 // Own address register + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the I2C master +// slave address register. +// +//***************************************************************************** +#define I2C_MASTER_SA_SA_MASK 0x000000FE // Slave address +#define I2C_MASTER_SA_RS 0x00000001 // Receive/send +#define I2C_MASTER_SA_SA_SHIFT 1 + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the I2C Master +// Control and Status register. +// +//***************************************************************************** +#define I2C_MASTER_CS_BUS_BUSY 0x00000040 // Bus busy +#define I2C_MASTER_CS_IDLE 0x00000020 // Idle +#define I2C_MASTER_CS_ERR_MASK 0x0000001C +#define I2C_MASTER_CS_BUSY 0x00000001 // Controller is TX/RX data +#define I2C_MASTER_CS_ERROR 0x00000002 // Error occurred +#define I2C_MASTER_CS_ADDR_ACK 0x00000004 // Address byte not acknowledged +#define I2C_MASTER_CS_DATA_ACK 0x00000008 // Data byte not acknowledged +#define I2C_MASTER_CS_ARB_LOST 0x00000010 // Lost arbitration +#define I2C_MASTER_CS_ACK 0x00000008 // Acknowlegde +#define I2C_MASTER_CS_STOP 0x00000004 // Stop +#define I2C_MASTER_CS_START 0x00000002 // Start +#define I2C_MASTER_CS_RUN 0x00000001 // Run + +//***************************************************************************** +// +// The following are deprecated defines for the values used in determining the +// contents of the I2C Master Timer Period register. +// +//***************************************************************************** +#define I2C_SCL_FAST 400000 // SCL fast frequency +#define I2C_SCL_STANDARD 100000 // SCL standard frequency +#define I2C_MASTER_TPR_SCL_LP 0x00000006 // SCL low period +#define I2C_MASTER_TPR_SCL_HP 0x00000004 // SCL high period +#define I2C_MASTER_TPR_SCL (I2C_MASTER_TPR_SCL_HP + I2C_MASTER_TPR_SCL_LP) + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the I2C Master +// Interrupt Mask register. +// +//***************************************************************************** +#define I2C_MASTER_IMR_IM 0x00000001 // Master interrupt mask + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the I2C Master +// Raw Interrupt Status register. +// +//***************************************************************************** +#define I2C_MASTER_RIS_RIS 0x00000001 // Master raw interrupt status + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the I2C Master +// Masked Interrupt Status register. +// +//***************************************************************************** +#define I2C_MASTER_MIS_MIS 0x00000001 // Master masked interrupt status + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the I2C Master +// Interrupt Clear register. +// +//***************************************************************************** +#define I2C_MASTER_MICR_IC 0x00000001 // Master interrupt clear + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the I2C Master +// Configuration register. +// +//***************************************************************************** +#define I2C_MASTER_CR_SFE 0x00000020 // Slave function enable +#define I2C_MASTER_CR_MFE 0x00000010 // Master function enable +#define I2C_MASTER_CR_LPBK 0x00000001 // Loopback enable + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the I2C Slave Own +// Address register. +// +//***************************************************************************** +#define I2C_SLAVE_SOAR_OAR_MASK 0x0000007F // Slave address + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the I2C Slave +// Control/Status register. +// +//***************************************************************************** +#define I2C_SLAVE_CSR_FBR 0x00000004 // First byte received from master +#define I2C_SLAVE_CSR_TREQ 0x00000002 // Transmit request received +#define I2C_SLAVE_CSR_DA 0x00000001 // Enable the device +#define I2C_SLAVE_CSR_RREQ 0x00000001 // Receive data from I2C master + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the I2C Slave +// Interrupt Mask register. +// +//***************************************************************************** +#define I2C_SLAVE_IMR_IM 0x00000001 // Slave interrupt mask + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the I2C Slave Raw +// Interrupt Status register. +// +//***************************************************************************** +#define I2C_SLAVE_RIS_RIS 0x00000001 // Slave raw interrupt status + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the I2C Slave +// Masked Interrupt Status register. +// +//***************************************************************************** +#define I2C_SLAVE_MIS_MIS 0x00000001 // Slave masked interrupt status + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the I2C Slave +// Interrupt Clear register. +// +//***************************************************************************** +#define I2C_SLAVE_SICR_IC 0x00000001 // Slave interrupt clear + +#endif + +#endif // __HW_I2C_H__ diff --git a/bsp/lm3s_9b9x/Libraries/inc/hw_i2s.h b/bsp/lm3s_9b9x/Libraries/inc/hw_i2s.h new file mode 100644 index 0000000000000000000000000000000000000000..af9658252f465eb821ed53b7a087fe9dcd6a879d --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/inc/hw_i2s.h @@ -0,0 +1,224 @@ +//***************************************************************************** +// +// hw_i2s.h - Macros for use in accessing the I2S registers. +// +// Copyright (c) 2008-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_I2S_H__ +#define __HW_I2S_H__ + +//***************************************************************************** +// +// The following are defines for the Inter-Integrated Circuit Sound register +// offsets. +// +//***************************************************************************** +#define I2S_O_TXFIFO 0x00000000 // I2S Transmit FIFO Data +#define I2S_O_TXFIFOCFG 0x00000004 // I2S Transmit FIFO Configuration +#define I2S_O_TXCFG 0x00000008 // I2S Transmit Module + // Configuration +#define I2S_O_TXLIMIT 0x0000000C // I2S Transmit FIFO Limit +#define I2S_O_TXISM 0x00000010 // I2S Transmit Interrupt Status + // and Mask +#define I2S_O_TXLEV 0x00000018 // I2S Transmit FIFO Level +#define I2S_O_RXFIFO 0x00000800 // I2S Receive FIFO Data +#define I2S_O_RXFIFOCFG 0x00000804 // I2S Receive FIFO Configuration +#define I2S_O_RXCFG 0x00000808 // I2S Receive Module Configuration +#define I2S_O_RXLIMIT 0x0000080C // I2S Receive FIFO Limit +#define I2S_O_RXISM 0x00000810 // I2S Receive Interrupt Status and + // Mask +#define I2S_O_RXLEV 0x00000818 // I2S Receive FIFO Level +#define I2S_O_CFG 0x00000C00 // I2S Module Configuration +#define I2S_O_IM 0x00000C10 // I2S Interrupt Mask +#define I2S_O_RIS 0x00000C14 // I2S Raw Interrupt Status +#define I2S_O_MIS 0x00000C18 // I2S Masked Interrupt Status +#define I2S_O_IC 0x00000C1C // I2S Interrupt Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2S_O_TXFIFO register. +// +//***************************************************************************** +#define I2S_TXFIFO_M 0xFFFFFFFF // TX Data +#define I2S_TXFIFO_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2S_O_TXFIFOCFG +// register. +// +//***************************************************************************** +#define I2S_TXFIFOCFG_CSS 0x00000002 // Compact Stereo Sample Size +#define I2S_TXFIFOCFG_LRS 0x00000001 // Left-Right Sample Indicator + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2S_O_TXCFG register. +// +//***************************************************************************** +#define I2S_TXCFG_JST 0x20000000 // Justification of Output Data +#define I2S_TXCFG_DLY 0x10000000 // Data Delay +#define I2S_TXCFG_SCP 0x08000000 // SCLK Polarity +#define I2S_TXCFG_LRP 0x04000000 // Left/Right Clock Polarity +#define I2S_TXCFG_WM_M 0x03000000 // Write Mode +#define I2S_TXCFG_WM_DUAL 0x00000000 // Stereo mode +#define I2S_TXCFG_WM_COMPACT 0x01000000 // Compact Stereo mode +#define I2S_TXCFG_WM_MONO 0x02000000 // Mono mode +#define I2S_TXCFG_FMT 0x00800000 // FIFO Empty +#define I2S_TXCFG_MSL 0x00400000 // SCLK Master/Slave +#define I2S_TXCFG_SSZ_M 0x0000FC00 // Sample Size +#define I2S_TXCFG_SDSZ_M 0x000003F0 // System Data Size +#define I2S_TXCFG_SSZ_S 10 +#define I2S_TXCFG_SDSZ_S 4 + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2S_O_TXLIMIT register. +// +//***************************************************************************** +#define I2S_TXLIMIT_LIMIT_M 0x0000001F // FIFO Limit +#define I2S_TXLIMIT_LIMIT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2S_O_TXISM register. +// +//***************************************************************************** +#define I2S_TXISM_FFI 0x00010000 // Transmit FIFO Service Request + // Interrupt +#define I2S_TXISM_FFM 0x00000001 // FIFO Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2S_O_TXLEV register. +// +//***************************************************************************** +#define I2S_TXLEV_LEVEL_M 0x0000001F // Number of Audio Samples +#define I2S_TXLEV_LEVEL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2S_O_RXFIFO register. +// +//***************************************************************************** +#define I2S_RXFIFO_M 0xFFFFFFFF // RX Data +#define I2S_RXFIFO_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2S_O_RXFIFOCFG +// register. +// +//***************************************************************************** +#define I2S_RXFIFOCFG_FMM 0x00000004 // FIFO Mono Mode +#define I2S_RXFIFOCFG_CSS 0x00000002 // Compact Stereo Sample Size +#define I2S_RXFIFOCFG_LRS 0x00000001 // Left-Right Sample Indicator + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2S_O_RXCFG register. +// +//***************************************************************************** +#define I2S_RXCFG_JST 0x20000000 // Justification of Input Data +#define I2S_RXCFG_DLY 0x10000000 // Data Delay +#define I2S_RXCFG_SCP 0x08000000 // SCLK Polarity +#define I2S_RXCFG_LRP 0x04000000 // Left/Right Clock Polarity +#define I2S_RXCFG_RM 0x01000000 // Read Mode +#define I2S_RXCFG_MSL 0x00400000 // SCLK Master/Slave +#define I2S_RXCFG_SSZ_M 0x0000FC00 // Sample Size +#define I2S_RXCFG_SDSZ_M 0x000003F0 // System Data Size +#define I2S_RXCFG_SSZ_S 10 +#define I2S_RXCFG_SDSZ_S 4 + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2S_O_RXLIMIT register. +// +//***************************************************************************** +#define I2S_RXLIMIT_LIMIT_M 0x0000001F // FIFO Limit +#define I2S_RXLIMIT_LIMIT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2S_O_RXISM register. +// +//***************************************************************************** +#define I2S_RXISM_FFI 0x00010000 // Receive FIFO Service Request + // Interrupt +#define I2S_RXISM_FFM 0x00000001 // FIFO Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2S_O_RXLEV register. +// +//***************************************************************************** +#define I2S_RXLEV_LEVEL_M 0x0000001F // Number of Audio Samples +#define I2S_RXLEV_LEVEL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2S_O_CFG register. +// +//***************************************************************************** +#define I2S_CFG_RXSLV 0x00000020 // Use External I2S0RXMCLK +#define I2S_CFG_TXSLV 0x00000010 // Use External I2S0TXMCLK +#define I2S_CFG_RXEN 0x00000002 // Serial Receive Engine Enable +#define I2S_CFG_TXEN 0x00000001 // Serial Transmit Engine Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2S_O_IM register. +// +//***************************************************************************** +#define I2S_IM_RXRE 0x00000020 // Receive FIFO Read Error +#define I2S_IM_RXFSR 0x00000010 // Receive FIFO Service Request +#define I2S_IM_TXWE 0x00000002 // Transmit FIFO Write Error +#define I2S_IM_TXFSR 0x00000001 // Transmit FIFO Service Request + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2S_O_RIS register. +// +//***************************************************************************** +#define I2S_RIS_RXRE 0x00000020 // Receive FIFO Read Error +#define I2S_RIS_RXFSR 0x00000010 // Receive FIFO Service Request +#define I2S_RIS_TXWE 0x00000002 // Transmit FIFO Write Error +#define I2S_RIS_TXFSR 0x00000001 // Transmit FIFO Service Request + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2S_O_MIS register. +// +//***************************************************************************** +#define I2S_MIS_RXRE 0x00000020 // Receive FIFO Read Error +#define I2S_MIS_RXFSR 0x00000010 // Receive FIFO Service Request +#define I2S_MIS_TXWE 0x00000002 // Transmit FIFO Write Error +#define I2S_MIS_TXFSR 0x00000001 // Transmit FIFO Service Request + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2S_O_IC register. +// +//***************************************************************************** +#define I2S_IC_RXRE 0x00000020 // Receive FIFO Read Error +#define I2S_IC_TXWE 0x00000002 // Transmit FIFO Write Error + +#endif // __HW_I2S_H__ diff --git a/bsp/lm3s_9b9x/Libraries/inc/hw_ints.h b/bsp/lm3s_9b9x/Libraries/inc/hw_ints.h new file mode 100644 index 0000000000000000000000000000000000000000..daa5917e85c1a36895d9c75050034df0065e544a --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/inc/hw_ints.h @@ -0,0 +1,141 @@ +//***************************************************************************** +// +// hw_ints.h - Macros that define the interrupt assignment on Stellaris. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_INTS_H__ +#define __HW_INTS_H__ + +//***************************************************************************** +// +// The following are defines for the fault assignments. +// +//***************************************************************************** +#define FAULT_NMI 2 // NMI fault +#define FAULT_HARD 3 // Hard fault +#define FAULT_MPU 4 // MPU fault +#define FAULT_BUS 5 // Bus fault +#define FAULT_USAGE 6 // Usage fault +#define FAULT_SVCALL 11 // SVCall +#define FAULT_DEBUG 12 // Debug monitor +#define FAULT_PENDSV 14 // PendSV +#define FAULT_SYSTICK 15 // System Tick + +//***************************************************************************** +// +// The following are defines for the interrupt assignments. +// +//***************************************************************************** +#define INT_GPIOA 16 // GPIO Port A +#define INT_GPIOB 17 // GPIO Port B +#define INT_GPIOC 18 // GPIO Port C +#define INT_GPIOD 19 // GPIO Port D +#define INT_GPIOE 20 // GPIO Port E +#define INT_UART0 21 // UART0 Rx and Tx +#define INT_UART1 22 // UART1 Rx and Tx +#define INT_SSI0 23 // SSI0 Rx and Tx +#define INT_I2C0 24 // I2C0 Master and Slave +#define INT_PWM_FAULT 25 // PWM Fault +#define INT_PWM0 26 // PWM Generator 0 +#define INT_PWM1 27 // PWM Generator 1 +#define INT_PWM2 28 // PWM Generator 2 +#define INT_QEI0 29 // Quadrature Encoder 0 +#define INT_ADC0SS0 30 // ADC0 Sequence 0 +#define INT_ADC0SS1 31 // ADC0 Sequence 1 +#define INT_ADC0SS2 32 // ADC0 Sequence 2 +#define INT_ADC0SS3 33 // ADC0 Sequence 3 +#define INT_WATCHDOG 34 // Watchdog timer +#define INT_TIMER0A 35 // Timer 0 subtimer A +#define INT_TIMER0B 36 // Timer 0 subtimer B +#define INT_TIMER1A 37 // Timer 1 subtimer A +#define INT_TIMER1B 38 // Timer 1 subtimer B +#define INT_TIMER2A 39 // Timer 2 subtimer A +#define INT_TIMER2B 40 // Timer 2 subtimer B +#define INT_COMP0 41 // Analog Comparator 0 +#define INT_COMP1 42 // Analog Comparator 1 +#define INT_COMP2 43 // Analog Comparator 2 +#define INT_SYSCTL 44 // System Control (PLL, OSC, BO) +#define INT_FLASH 45 // FLASH Control +#define INT_GPIOF 46 // GPIO Port F +#define INT_GPIOG 47 // GPIO Port G +#define INT_GPIOH 48 // GPIO Port H +#define INT_UART2 49 // UART2 Rx and Tx +#define INT_SSI1 50 // SSI1 Rx and Tx +#define INT_TIMER3A 51 // Timer 3 subtimer A +#define INT_TIMER3B 52 // Timer 3 subtimer B +#define INT_I2C1 53 // I2C1 Master and Slave +#define INT_QEI1 54 // Quadrature Encoder 1 +#define INT_CAN0 55 // CAN0 +#define INT_CAN1 56 // CAN1 +#define INT_CAN2 57 // CAN2 +#define INT_ETH 58 // Ethernet +#define INT_HIBERNATE 59 // Hibernation module +#define INT_USB0 60 // USB 0 Controller +#define INT_PWM3 61 // PWM Generator 3 +#define INT_UDMA 62 // uDMA controller +#define INT_UDMAERR 63 // uDMA Error +#define INT_ADC1SS0 64 // ADC1 Sequence 0 +#define INT_ADC1SS1 65 // ADC1 Sequence 1 +#define INT_ADC1SS2 66 // ADC1 Sequence 2 +#define INT_ADC1SS3 67 // ADC1 Sequence 3 +#define INT_I2S0 68 // I2S0 +#define INT_EPI0 69 // EPI0 +#define INT_GPIOJ 70 // GPIO Port J + +//***************************************************************************** +// +// The following are defines for the total number of interrupts. +// +//***************************************************************************** +#define NUM_INTERRUPTS 71 + +//***************************************************************************** +// +// The following are defines for the total number of priority levels. +// +//***************************************************************************** +#define NUM_PRIORITY 8 +#define NUM_PRIORITY_BITS 3 + +//***************************************************************************** +// +// The following definitions are deprecated. +// +//***************************************************************************** +#ifndef DEPRECATED + +//***************************************************************************** +// +// The following are deprecated defines for the interrupt assignments. +// +//***************************************************************************** +#define INT_SSI 23 // SSI Rx and Tx +#define INT_I2C 24 // I2C Master and Slave +#define INT_QEI 29 // Quadrature Encoder +#define INT_ADC0 30 // ADC Sequence 0 +#define INT_ADC1 31 // ADC Sequence 1 +#define INT_ADC2 32 // ADC Sequence 2 +#define INT_ADC3 33 // ADC Sequence 3 + +#endif + +#endif // __HW_INTS_H__ diff --git a/bsp/lm3s_9b9x/Libraries/inc/hw_memmap.h b/bsp/lm3s_9b9x/Libraries/inc/hw_memmap.h new file mode 100644 index 0000000000000000000000000000000000000000..04d75f729b3bdc7e4c666d048ee2157dbf2b28a7 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/inc/hw_memmap.h @@ -0,0 +1,115 @@ +//***************************************************************************** +// +// hw_memmap.h - Macros defining the memory map of Stellaris. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_MEMMAP_H__ +#define __HW_MEMMAP_H__ + +//***************************************************************************** +// +// The following are defines for the base address of the memories and +// peripherals. +// +//***************************************************************************** +#define FLASH_BASE 0x00000000 // FLASH memory +#define SRAM_BASE 0x20000000 // SRAM memory +#define WATCHDOG0_BASE 0x40000000 // Watchdog0 +#define WATCHDOG1_BASE 0x40001000 // Watchdog1 +#define GPIO_PORTA_BASE 0x40004000 // GPIO Port A +#define GPIO_PORTB_BASE 0x40005000 // GPIO Port B +#define GPIO_PORTC_BASE 0x40006000 // GPIO Port C +#define GPIO_PORTD_BASE 0x40007000 // GPIO Port D +#define SSI0_BASE 0x40008000 // SSI0 +#define SSI1_BASE 0x40009000 // SSI1 +#define UART0_BASE 0x4000C000 // UART0 +#define UART1_BASE 0x4000D000 // UART1 +#define UART2_BASE 0x4000E000 // UART2 +#define I2C0_MASTER_BASE 0x40020000 // I2C0 Master +#define I2C0_SLAVE_BASE 0x40020800 // I2C0 Slave +#define I2C1_MASTER_BASE 0x40021000 // I2C1 Master +#define I2C1_SLAVE_BASE 0x40021800 // I2C1 Slave +#define GPIO_PORTE_BASE 0x40024000 // GPIO Port E +#define GPIO_PORTF_BASE 0x40025000 // GPIO Port F +#define GPIO_PORTG_BASE 0x40026000 // GPIO Port G +#define GPIO_PORTH_BASE 0x40027000 // GPIO Port H +#define PWM_BASE 0x40028000 // PWM +#define QEI0_BASE 0x4002C000 // QEI0 +#define QEI1_BASE 0x4002D000 // QEI1 +#define TIMER0_BASE 0x40030000 // Timer0 +#define TIMER1_BASE 0x40031000 // Timer1 +#define TIMER2_BASE 0x40032000 // Timer2 +#define TIMER3_BASE 0x40033000 // Timer3 +#define ADC0_BASE 0x40038000 // ADC0 +#define ADC1_BASE 0x40039000 // ADC1 +#define COMP_BASE 0x4003C000 // Analog comparators +#define GPIO_PORTJ_BASE 0x4003D000 // GPIO Port J +#define CAN0_BASE 0x40040000 // CAN0 +#define CAN1_BASE 0x40041000 // CAN1 +#define CAN2_BASE 0x40042000 // CAN2 +#define ETH_BASE 0x40048000 // Ethernet +#define MAC_BASE 0x40048000 // Ethernet +#define USB0_BASE 0x40050000 // USB 0 Controller +#define I2S0_BASE 0x40054000 // I2S0 +#define GPIO_PORTA_AHB_BASE 0x40058000 // GPIO Port A (high speed) +#define GPIO_PORTB_AHB_BASE 0x40059000 // GPIO Port B (high speed) +#define GPIO_PORTC_AHB_BASE 0x4005A000 // GPIO Port C (high speed) +#define GPIO_PORTD_AHB_BASE 0x4005B000 // GPIO Port D (high speed) +#define GPIO_PORTE_AHB_BASE 0x4005C000 // GPIO Port E (high speed) +#define GPIO_PORTF_AHB_BASE 0x4005D000 // GPIO Port F (high speed) +#define GPIO_PORTG_AHB_BASE 0x4005E000 // GPIO Port G (high speed) +#define GPIO_PORTH_AHB_BASE 0x4005F000 // GPIO Port H (high speed) +#define GPIO_PORTJ_AHB_BASE 0x40060000 // GPIO Port J (high speed) +#define EPI0_BASE 0x400D0000 // EPI0 +#define HIB_BASE 0x400FC000 // Hibernation Module +#define FLASH_CTRL_BASE 0x400FD000 // FLASH Controller +#define SYSCTL_BASE 0x400FE000 // System Control +#define UDMA_BASE 0x400FF000 // uDMA Controller +#define ITM_BASE 0xE0000000 // Instrumentation Trace Macrocell +#define DWT_BASE 0xE0001000 // Data Watchpoint and Trace +#define FPB_BASE 0xE0002000 // FLASH Patch and Breakpoint +#define NVIC_BASE 0xE000E000 // Nested Vectored Interrupt Ctrl +#define TPIU_BASE 0xE0040000 // Trace Port Interface Unit + +//***************************************************************************** +// +// The following definitions are deprecated. +// +//***************************************************************************** +#ifndef DEPRECATED + +//***************************************************************************** +// +// The following are deprecated defines for the base address of the memories +// and peripherals. +// +//***************************************************************************** +#define WATCHDOG_BASE 0x40000000 // Watchdog +#define SSI_BASE 0x40008000 // SSI +#define I2C_MASTER_BASE 0x40020000 // I2C Master +#define I2C_SLAVE_BASE 0x40020800 // I2C Slave +#define QEI_BASE 0x4002C000 // QEI +#define ADC_BASE 0x40038000 // ADC + +#endif + +#endif // __HW_MEMMAP_H__ diff --git a/bsp/lm3s_9b9x/Libraries/inc/hw_nvic.h b/bsp/lm3s_9b9x/Libraries/inc/hw_nvic.h new file mode 100644 index 0000000000000000000000000000000000000000..da01d3ec1437b25bee23387f6f363384de88fee9 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/inc/hw_nvic.h @@ -0,0 +1,1026 @@ +//***************************************************************************** +// +// hw_nvic.h - Macros used when accessing the NVIC hardware. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_NVIC_H__ +#define __HW_NVIC_H__ + +//***************************************************************************** +// +// The following are defines for the NVIC register addresses. +// +//***************************************************************************** +#define NVIC_INT_TYPE 0xE000E004 // Interrupt Controller Type Reg +#define NVIC_ST_CTRL 0xE000E010 // SysTick Control and Status Reg +#define NVIC_ST_RELOAD 0xE000E014 // SysTick Reload Value Register +#define NVIC_ST_CURRENT 0xE000E018 // SysTick Current Value Register +#define NVIC_ST_CAL 0xE000E01C // SysTick Calibration Value Reg +#define NVIC_EN0 0xE000E100 // IRQ 0 to 31 Set Enable Register +#define NVIC_EN1 0xE000E104 // IRQ 32 to 63 Set Enable Register +#define NVIC_DIS0 0xE000E180 // IRQ 0 to 31 Clear Enable Reg +#define NVIC_DIS1 0xE000E184 // IRQ 32 to 63 Clear Enable Reg +#define NVIC_PEND0 0xE000E200 // IRQ 0 to 31 Set Pending Register +#define NVIC_PEND1 0xE000E204 // IRQ 32 to 63 Set Pending Reg +#define NVIC_UNPEND0 0xE000E280 // IRQ 0 to 31 Clear Pending Reg +#define NVIC_UNPEND1 0xE000E284 // IRQ 32 to 63 Clear Pending Reg +#define NVIC_ACTIVE0 0xE000E300 // IRQ 0 to 31 Active Register +#define NVIC_ACTIVE1 0xE000E304 // IRQ 32 to 63 Active Register +#define NVIC_PRI0 0xE000E400 // IRQ 0 to 3 Priority Register +#define NVIC_PRI1 0xE000E404 // IRQ 4 to 7 Priority Register +#define NVIC_PRI2 0xE000E408 // IRQ 8 to 11 Priority Register +#define NVIC_PRI3 0xE000E40C // IRQ 12 to 15 Priority Register +#define NVIC_PRI4 0xE000E410 // IRQ 16 to 19 Priority Register +#define NVIC_PRI5 0xE000E414 // IRQ 20 to 23 Priority Register +#define NVIC_PRI6 0xE000E418 // IRQ 24 to 27 Priority Register +#define NVIC_PRI7 0xE000E41C // IRQ 28 to 31 Priority Register +#define NVIC_PRI8 0xE000E420 // IRQ 32 to 35 Priority Register +#define NVIC_PRI9 0xE000E424 // IRQ 36 to 39 Priority Register +#define NVIC_PRI10 0xE000E428 // IRQ 40 to 43 Priority Register +#define NVIC_PRI11 0xE000E42C // IRQ 44 to 47 Priority Register +#define NVIC_PRI12 0xE000E430 // IRQ 48 to 51 Priority Register +#define NVIC_PRI13 0xE000E434 // IRQ 52 to 55 Priority Register +#define NVIC_CPUID 0xE000ED00 // CPUID Base Register +#define NVIC_INT_CTRL 0xE000ED04 // Interrupt Control State Register +#define NVIC_VTABLE 0xE000ED08 // Vector Table Offset Register +#define NVIC_APINT 0xE000ED0C // App. Int & Reset Control Reg +#define NVIC_SYS_CTRL 0xE000ED10 // System Control Register +#define NVIC_CFG_CTRL 0xE000ED14 // Configuration Control Register +#define NVIC_SYS_PRI1 0xE000ED18 // Sys. Handlers 4 to 7 Priority +#define NVIC_SYS_PRI2 0xE000ED1C // Sys. Handlers 8 to 11 Priority +#define NVIC_SYS_PRI3 0xE000ED20 // Sys. Handlers 12 to 15 Priority +#define NVIC_SYS_HND_CTRL 0xE000ED24 // System Handler Control and State +#define NVIC_FAULT_STAT 0xE000ED28 // Configurable Fault Status Reg +#define NVIC_HFAULT_STAT 0xE000ED2C // Hard Fault Status Register +#define NVIC_DEBUG_STAT 0xE000ED30 // Debug Status Register +#define NVIC_MM_ADDR 0xE000ED34 // Mem Manage Address Register +#define NVIC_FAULT_ADDR 0xE000ED38 // Bus Fault Address Register +#define NVIC_MPU_TYPE 0xE000ED90 // MPU Type Register +#define NVIC_MPU_CTRL 0xE000ED94 // MPU Control Register +#define NVIC_MPU_NUMBER 0xE000ED98 // MPU Region Number Register +#define NVIC_MPU_BASE 0xE000ED9C // MPU Region Base Address Register +#define NVIC_MPU_ATTR 0xE000EDA0 // MPU Region Attribute & Size Reg +#define NVIC_DBG_CTRL 0xE000EDF0 // Debug Control and Status Reg +#define NVIC_DBG_XFER 0xE000EDF4 // Debug Core Reg. Transfer Select +#define NVIC_DBG_DATA 0xE000EDF8 // Debug Core Register Data +#define NVIC_DBG_INT 0xE000EDFC // Debug Reset Interrupt Control +#define NVIC_SW_TRIG 0xE000EF00 // Software Trigger Interrupt Reg + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_INT_TYPE register. +// +//***************************************************************************** +#define NVIC_INT_TYPE_LINES_M 0x0000001F // Number of interrupt lines (x32) +#define NVIC_INT_TYPE_LINES_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_ST_CTRL register. +// +//***************************************************************************** +#define NVIC_ST_CTRL_COUNT 0x00010000 // Count flag +#define NVIC_ST_CTRL_CLK_SRC 0x00000004 // Clock Source +#define NVIC_ST_CTRL_INTEN 0x00000002 // Interrupt enable +#define NVIC_ST_CTRL_ENABLE 0x00000001 // Counter mode + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_ST_RELOAD register. +// +//***************************************************************************** +#define NVIC_ST_RELOAD_M 0x00FFFFFF // Counter load value +#define NVIC_ST_RELOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_ST_CURRENT +// register. +// +//***************************************************************************** +#define NVIC_ST_CURRENT_M 0x00FFFFFF // Counter current value +#define NVIC_ST_CURRENT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_ST_CAL register. +// +//***************************************************************************** +#define NVIC_ST_CAL_NOREF 0x80000000 // No reference clock +#define NVIC_ST_CAL_SKEW 0x40000000 // Clock skew +#define NVIC_ST_CAL_ONEMS_M 0x00FFFFFF // 1ms reference value +#define NVIC_ST_CAL_ONEMS_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_EN0 register. +// +//***************************************************************************** +#define NVIC_EN0_INT31 0x80000000 // Interrupt 31 enable +#define NVIC_EN0_INT30 0x40000000 // Interrupt 30 enable +#define NVIC_EN0_INT29 0x20000000 // Interrupt 29 enable +#define NVIC_EN0_INT28 0x10000000 // Interrupt 28 enable +#define NVIC_EN0_INT27 0x08000000 // Interrupt 27 enable +#define NVIC_EN0_INT26 0x04000000 // Interrupt 26 enable +#define NVIC_EN0_INT25 0x02000000 // Interrupt 25 enable +#define NVIC_EN0_INT24 0x01000000 // Interrupt 24 enable +#define NVIC_EN0_INT23 0x00800000 // Interrupt 23 enable +#define NVIC_EN0_INT22 0x00400000 // Interrupt 22 enable +#define NVIC_EN0_INT21 0x00200000 // Interrupt 21 enable +#define NVIC_EN0_INT20 0x00100000 // Interrupt 20 enable +#define NVIC_EN0_INT19 0x00080000 // Interrupt 19 enable +#define NVIC_EN0_INT18 0x00040000 // Interrupt 18 enable +#define NVIC_EN0_INT17 0x00020000 // Interrupt 17 enable +#define NVIC_EN0_INT16 0x00010000 // Interrupt 16 enable +#define NVIC_EN0_INT15 0x00008000 // Interrupt 15 enable +#define NVIC_EN0_INT14 0x00004000 // Interrupt 14 enable +#define NVIC_EN0_INT13 0x00002000 // Interrupt 13 enable +#define NVIC_EN0_INT12 0x00001000 // Interrupt 12 enable +#define NVIC_EN0_INT11 0x00000800 // Interrupt 11 enable +#define NVIC_EN0_INT10 0x00000400 // Interrupt 10 enable +#define NVIC_EN0_INT9 0x00000200 // Interrupt 9 enable +#define NVIC_EN0_INT8 0x00000100 // Interrupt 8 enable +#define NVIC_EN0_INT7 0x00000080 // Interrupt 7 enable +#define NVIC_EN0_INT6 0x00000040 // Interrupt 6 enable +#define NVIC_EN0_INT5 0x00000020 // Interrupt 5 enable +#define NVIC_EN0_INT4 0x00000010 // Interrupt 4 enable +#define NVIC_EN0_INT3 0x00000008 // Interrupt 3 enable +#define NVIC_EN0_INT2 0x00000004 // Interrupt 2 enable +#define NVIC_EN0_INT1 0x00000002 // Interrupt 1 enable +#define NVIC_EN0_INT0 0x00000001 // Interrupt 0 enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_EN1 register. +// +//***************************************************************************** +#define NVIC_EN1_INT59 0x08000000 // Interrupt 59 enable +#define NVIC_EN1_INT58 0x04000000 // Interrupt 58 enable +#define NVIC_EN1_INT57 0x02000000 // Interrupt 57 enable +#define NVIC_EN1_INT56 0x01000000 // Interrupt 56 enable +#define NVIC_EN1_INT55 0x00800000 // Interrupt 55 enable +#define NVIC_EN1_INT54 0x00400000 // Interrupt 54 enable +#define NVIC_EN1_INT53 0x00200000 // Interrupt 53 enable +#define NVIC_EN1_INT52 0x00100000 // Interrupt 52 enable +#define NVIC_EN1_INT51 0x00080000 // Interrupt 51 enable +#define NVIC_EN1_INT50 0x00040000 // Interrupt 50 enable +#define NVIC_EN1_INT49 0x00020000 // Interrupt 49 enable +#define NVIC_EN1_INT48 0x00010000 // Interrupt 48 enable +#define NVIC_EN1_INT47 0x00008000 // Interrupt 47 enable +#define NVIC_EN1_INT46 0x00004000 // Interrupt 46 enable +#define NVIC_EN1_INT45 0x00002000 // Interrupt 45 enable +#define NVIC_EN1_INT44 0x00001000 // Interrupt 44 enable +#define NVIC_EN1_INT43 0x00000800 // Interrupt 43 enable +#define NVIC_EN1_INT42 0x00000400 // Interrupt 42 enable +#define NVIC_EN1_INT41 0x00000200 // Interrupt 41 enable +#define NVIC_EN1_INT40 0x00000100 // Interrupt 40 enable +#define NVIC_EN1_INT39 0x00000080 // Interrupt 39 enable +#define NVIC_EN1_INT38 0x00000040 // Interrupt 38 enable +#define NVIC_EN1_INT37 0x00000020 // Interrupt 37 enable +#define NVIC_EN1_INT36 0x00000010 // Interrupt 36 enable +#define NVIC_EN1_INT35 0x00000008 // Interrupt 35 enable +#define NVIC_EN1_INT34 0x00000004 // Interrupt 34 enable +#define NVIC_EN1_INT33 0x00000002 // Interrupt 33 enable +#define NVIC_EN1_INT32 0x00000001 // Interrupt 32 enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_DIS0 register. +// +//***************************************************************************** +#define NVIC_DIS0_INT31 0x80000000 // Interrupt 31 disable +#define NVIC_DIS0_INT30 0x40000000 // Interrupt 30 disable +#define NVIC_DIS0_INT29 0x20000000 // Interrupt 29 disable +#define NVIC_DIS0_INT28 0x10000000 // Interrupt 28 disable +#define NVIC_DIS0_INT27 0x08000000 // Interrupt 27 disable +#define NVIC_DIS0_INT26 0x04000000 // Interrupt 26 disable +#define NVIC_DIS0_INT25 0x02000000 // Interrupt 25 disable +#define NVIC_DIS0_INT24 0x01000000 // Interrupt 24 disable +#define NVIC_DIS0_INT23 0x00800000 // Interrupt 23 disable +#define NVIC_DIS0_INT22 0x00400000 // Interrupt 22 disable +#define NVIC_DIS0_INT21 0x00200000 // Interrupt 21 disable +#define NVIC_DIS0_INT20 0x00100000 // Interrupt 20 disable +#define NVIC_DIS0_INT19 0x00080000 // Interrupt 19 disable +#define NVIC_DIS0_INT18 0x00040000 // Interrupt 18 disable +#define NVIC_DIS0_INT17 0x00020000 // Interrupt 17 disable +#define NVIC_DIS0_INT16 0x00010000 // Interrupt 16 disable +#define NVIC_DIS0_INT15 0x00008000 // Interrupt 15 disable +#define NVIC_DIS0_INT14 0x00004000 // Interrupt 14 disable +#define NVIC_DIS0_INT13 0x00002000 // Interrupt 13 disable +#define NVIC_DIS0_INT12 0x00001000 // Interrupt 12 disable +#define NVIC_DIS0_INT11 0x00000800 // Interrupt 11 disable +#define NVIC_DIS0_INT10 0x00000400 // Interrupt 10 disable +#define NVIC_DIS0_INT9 0x00000200 // Interrupt 9 disable +#define NVIC_DIS0_INT8 0x00000100 // Interrupt 8 disable +#define NVIC_DIS0_INT7 0x00000080 // Interrupt 7 disable +#define NVIC_DIS0_INT6 0x00000040 // Interrupt 6 disable +#define NVIC_DIS0_INT5 0x00000020 // Interrupt 5 disable +#define NVIC_DIS0_INT4 0x00000010 // Interrupt 4 disable +#define NVIC_DIS0_INT3 0x00000008 // Interrupt 3 disable +#define NVIC_DIS0_INT2 0x00000004 // Interrupt 2 disable +#define NVIC_DIS0_INT1 0x00000002 // Interrupt 1 disable +#define NVIC_DIS0_INT0 0x00000001 // Interrupt 0 disable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_DIS1 register. +// +//***************************************************************************** +#define NVIC_DIS1_INT59 0x08000000 // Interrupt 59 disable +#define NVIC_DIS1_INT58 0x04000000 // Interrupt 58 disable +#define NVIC_DIS1_INT57 0x02000000 // Interrupt 57 disable +#define NVIC_DIS1_INT56 0x01000000 // Interrupt 56 disable +#define NVIC_DIS1_INT55 0x00800000 // Interrupt 55 disable +#define NVIC_DIS1_INT54 0x00400000 // Interrupt 54 disable +#define NVIC_DIS1_INT53 0x00200000 // Interrupt 53 disable +#define NVIC_DIS1_INT52 0x00100000 // Interrupt 52 disable +#define NVIC_DIS1_INT51 0x00080000 // Interrupt 51 disable +#define NVIC_DIS1_INT50 0x00040000 // Interrupt 50 disable +#define NVIC_DIS1_INT49 0x00020000 // Interrupt 49 disable +#define NVIC_DIS1_INT48 0x00010000 // Interrupt 48 disable +#define NVIC_DIS1_INT47 0x00008000 // Interrupt 47 disable +#define NVIC_DIS1_INT46 0x00004000 // Interrupt 46 disable +#define NVIC_DIS1_INT45 0x00002000 // Interrupt 45 disable +#define NVIC_DIS1_INT44 0x00001000 // Interrupt 44 disable +#define NVIC_DIS1_INT43 0x00000800 // Interrupt 43 disable +#define NVIC_DIS1_INT42 0x00000400 // Interrupt 42 disable +#define NVIC_DIS1_INT41 0x00000200 // Interrupt 41 disable +#define NVIC_DIS1_INT40 0x00000100 // Interrupt 40 disable +#define NVIC_DIS1_INT39 0x00000080 // Interrupt 39 disable +#define NVIC_DIS1_INT38 0x00000040 // Interrupt 38 disable +#define NVIC_DIS1_INT37 0x00000020 // Interrupt 37 disable +#define NVIC_DIS1_INT36 0x00000010 // Interrupt 36 disable +#define NVIC_DIS1_INT35 0x00000008 // Interrupt 35 disable +#define NVIC_DIS1_INT34 0x00000004 // Interrupt 34 disable +#define NVIC_DIS1_INT33 0x00000002 // Interrupt 33 disable +#define NVIC_DIS1_INT32 0x00000001 // Interrupt 32 disable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PEND0 register. +// +//***************************************************************************** +#define NVIC_PEND0_INT31 0x80000000 // Interrupt 31 pend +#define NVIC_PEND0_INT30 0x40000000 // Interrupt 30 pend +#define NVIC_PEND0_INT29 0x20000000 // Interrupt 29 pend +#define NVIC_PEND0_INT28 0x10000000 // Interrupt 28 pend +#define NVIC_PEND0_INT27 0x08000000 // Interrupt 27 pend +#define NVIC_PEND0_INT26 0x04000000 // Interrupt 26 pend +#define NVIC_PEND0_INT25 0x02000000 // Interrupt 25 pend +#define NVIC_PEND0_INT24 0x01000000 // Interrupt 24 pend +#define NVIC_PEND0_INT23 0x00800000 // Interrupt 23 pend +#define NVIC_PEND0_INT22 0x00400000 // Interrupt 22 pend +#define NVIC_PEND0_INT21 0x00200000 // Interrupt 21 pend +#define NVIC_PEND0_INT20 0x00100000 // Interrupt 20 pend +#define NVIC_PEND0_INT19 0x00080000 // Interrupt 19 pend +#define NVIC_PEND0_INT18 0x00040000 // Interrupt 18 pend +#define NVIC_PEND0_INT17 0x00020000 // Interrupt 17 pend +#define NVIC_PEND0_INT16 0x00010000 // Interrupt 16 pend +#define NVIC_PEND0_INT15 0x00008000 // Interrupt 15 pend +#define NVIC_PEND0_INT14 0x00004000 // Interrupt 14 pend +#define NVIC_PEND0_INT13 0x00002000 // Interrupt 13 pend +#define NVIC_PEND0_INT12 0x00001000 // Interrupt 12 pend +#define NVIC_PEND0_INT11 0x00000800 // Interrupt 11 pend +#define NVIC_PEND0_INT10 0x00000400 // Interrupt 10 pend +#define NVIC_PEND0_INT9 0x00000200 // Interrupt 9 pend +#define NVIC_PEND0_INT8 0x00000100 // Interrupt 8 pend +#define NVIC_PEND0_INT7 0x00000080 // Interrupt 7 pend +#define NVIC_PEND0_INT6 0x00000040 // Interrupt 6 pend +#define NVIC_PEND0_INT5 0x00000020 // Interrupt 5 pend +#define NVIC_PEND0_INT4 0x00000010 // Interrupt 4 pend +#define NVIC_PEND0_INT3 0x00000008 // Interrupt 3 pend +#define NVIC_PEND0_INT2 0x00000004 // Interrupt 2 pend +#define NVIC_PEND0_INT1 0x00000002 // Interrupt 1 pend +#define NVIC_PEND0_INT0 0x00000001 // Interrupt 0 pend + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PEND1 register. +// +//***************************************************************************** +#define NVIC_PEND1_INT59 0x08000000 // Interrupt 59 pend +#define NVIC_PEND1_INT58 0x04000000 // Interrupt 58 pend +#define NVIC_PEND1_INT57 0x02000000 // Interrupt 57 pend +#define NVIC_PEND1_INT56 0x01000000 // Interrupt 56 pend +#define NVIC_PEND1_INT55 0x00800000 // Interrupt 55 pend +#define NVIC_PEND1_INT54 0x00400000 // Interrupt 54 pend +#define NVIC_PEND1_INT53 0x00200000 // Interrupt 53 pend +#define NVIC_PEND1_INT52 0x00100000 // Interrupt 52 pend +#define NVIC_PEND1_INT51 0x00080000 // Interrupt 51 pend +#define NVIC_PEND1_INT50 0x00040000 // Interrupt 50 pend +#define NVIC_PEND1_INT49 0x00020000 // Interrupt 49 pend +#define NVIC_PEND1_INT48 0x00010000 // Interrupt 48 pend +#define NVIC_PEND1_INT47 0x00008000 // Interrupt 47 pend +#define NVIC_PEND1_INT46 0x00004000 // Interrupt 46 pend +#define NVIC_PEND1_INT45 0x00002000 // Interrupt 45 pend +#define NVIC_PEND1_INT44 0x00001000 // Interrupt 44 pend +#define NVIC_PEND1_INT43 0x00000800 // Interrupt 43 pend +#define NVIC_PEND1_INT42 0x00000400 // Interrupt 42 pend +#define NVIC_PEND1_INT41 0x00000200 // Interrupt 41 pend +#define NVIC_PEND1_INT40 0x00000100 // Interrupt 40 pend +#define NVIC_PEND1_INT39 0x00000080 // Interrupt 39 pend +#define NVIC_PEND1_INT38 0x00000040 // Interrupt 38 pend +#define NVIC_PEND1_INT37 0x00000020 // Interrupt 37 pend +#define NVIC_PEND1_INT36 0x00000010 // Interrupt 36 pend +#define NVIC_PEND1_INT35 0x00000008 // Interrupt 35 pend +#define NVIC_PEND1_INT34 0x00000004 // Interrupt 34 pend +#define NVIC_PEND1_INT33 0x00000002 // Interrupt 33 pend +#define NVIC_PEND1_INT32 0x00000001 // Interrupt 32 pend + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_UNPEND0 register. +// +//***************************************************************************** +#define NVIC_UNPEND0_INT31 0x80000000 // Interrupt 31 unpend +#define NVIC_UNPEND0_INT30 0x40000000 // Interrupt 30 unpend +#define NVIC_UNPEND0_INT29 0x20000000 // Interrupt 29 unpend +#define NVIC_UNPEND0_INT28 0x10000000 // Interrupt 28 unpend +#define NVIC_UNPEND0_INT27 0x08000000 // Interrupt 27 unpend +#define NVIC_UNPEND0_INT26 0x04000000 // Interrupt 26 unpend +#define NVIC_UNPEND0_INT25 0x02000000 // Interrupt 25 unpend +#define NVIC_UNPEND0_INT24 0x01000000 // Interrupt 24 unpend +#define NVIC_UNPEND0_INT23 0x00800000 // Interrupt 23 unpend +#define NVIC_UNPEND0_INT22 0x00400000 // Interrupt 22 unpend +#define NVIC_UNPEND0_INT21 0x00200000 // Interrupt 21 unpend +#define NVIC_UNPEND0_INT20 0x00100000 // Interrupt 20 unpend +#define NVIC_UNPEND0_INT19 0x00080000 // Interrupt 19 unpend +#define NVIC_UNPEND0_INT18 0x00040000 // Interrupt 18 unpend +#define NVIC_UNPEND0_INT17 0x00020000 // Interrupt 17 unpend +#define NVIC_UNPEND0_INT16 0x00010000 // Interrupt 16 unpend +#define NVIC_UNPEND0_INT15 0x00008000 // Interrupt 15 unpend +#define NVIC_UNPEND0_INT14 0x00004000 // Interrupt 14 unpend +#define NVIC_UNPEND0_INT13 0x00002000 // Interrupt 13 unpend +#define NVIC_UNPEND0_INT12 0x00001000 // Interrupt 12 unpend +#define NVIC_UNPEND0_INT11 0x00000800 // Interrupt 11 unpend +#define NVIC_UNPEND0_INT10 0x00000400 // Interrupt 10 unpend +#define NVIC_UNPEND0_INT9 0x00000200 // Interrupt 9 unpend +#define NVIC_UNPEND0_INT8 0x00000100 // Interrupt 8 unpend +#define NVIC_UNPEND0_INT7 0x00000080 // Interrupt 7 unpend +#define NVIC_UNPEND0_INT6 0x00000040 // Interrupt 6 unpend +#define NVIC_UNPEND0_INT5 0x00000020 // Interrupt 5 unpend +#define NVIC_UNPEND0_INT4 0x00000010 // Interrupt 4 unpend +#define NVIC_UNPEND0_INT3 0x00000008 // Interrupt 3 unpend +#define NVIC_UNPEND0_INT2 0x00000004 // Interrupt 2 unpend +#define NVIC_UNPEND0_INT1 0x00000002 // Interrupt 1 unpend +#define NVIC_UNPEND0_INT0 0x00000001 // Interrupt 0 unpend + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_UNPEND1 register. +// +//***************************************************************************** +#define NVIC_UNPEND1_INT59 0x08000000 // Interrupt 59 unpend +#define NVIC_UNPEND1_INT58 0x04000000 // Interrupt 58 unpend +#define NVIC_UNPEND1_INT57 0x02000000 // Interrupt 57 unpend +#define NVIC_UNPEND1_INT56 0x01000000 // Interrupt 56 unpend +#define NVIC_UNPEND1_INT55 0x00800000 // Interrupt 55 unpend +#define NVIC_UNPEND1_INT54 0x00400000 // Interrupt 54 unpend +#define NVIC_UNPEND1_INT53 0x00200000 // Interrupt 53 unpend +#define NVIC_UNPEND1_INT52 0x00100000 // Interrupt 52 unpend +#define NVIC_UNPEND1_INT51 0x00080000 // Interrupt 51 unpend +#define NVIC_UNPEND1_INT50 0x00040000 // Interrupt 50 unpend +#define NVIC_UNPEND1_INT49 0x00020000 // Interrupt 49 unpend +#define NVIC_UNPEND1_INT48 0x00010000 // Interrupt 48 unpend +#define NVIC_UNPEND1_INT47 0x00008000 // Interrupt 47 unpend +#define NVIC_UNPEND1_INT46 0x00004000 // Interrupt 46 unpend +#define NVIC_UNPEND1_INT45 0x00002000 // Interrupt 45 unpend +#define NVIC_UNPEND1_INT44 0x00001000 // Interrupt 44 unpend +#define NVIC_UNPEND1_INT43 0x00000800 // Interrupt 43 unpend +#define NVIC_UNPEND1_INT42 0x00000400 // Interrupt 42 unpend +#define NVIC_UNPEND1_INT41 0x00000200 // Interrupt 41 unpend +#define NVIC_UNPEND1_INT40 0x00000100 // Interrupt 40 unpend +#define NVIC_UNPEND1_INT39 0x00000080 // Interrupt 39 unpend +#define NVIC_UNPEND1_INT38 0x00000040 // Interrupt 38 unpend +#define NVIC_UNPEND1_INT37 0x00000020 // Interrupt 37 unpend +#define NVIC_UNPEND1_INT36 0x00000010 // Interrupt 36 unpend +#define NVIC_UNPEND1_INT35 0x00000008 // Interrupt 35 unpend +#define NVIC_UNPEND1_INT34 0x00000004 // Interrupt 34 unpend +#define NVIC_UNPEND1_INT33 0x00000002 // Interrupt 33 unpend +#define NVIC_UNPEND1_INT32 0x00000001 // Interrupt 32 unpend + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_ACTIVE0 register. +// +//***************************************************************************** +#define NVIC_ACTIVE0_INT31 0x80000000 // Interrupt 31 active +#define NVIC_ACTIVE0_INT30 0x40000000 // Interrupt 30 active +#define NVIC_ACTIVE0_INT29 0x20000000 // Interrupt 29 active +#define NVIC_ACTIVE0_INT28 0x10000000 // Interrupt 28 active +#define NVIC_ACTIVE0_INT27 0x08000000 // Interrupt 27 active +#define NVIC_ACTIVE0_INT26 0x04000000 // Interrupt 26 active +#define NVIC_ACTIVE0_INT25 0x02000000 // Interrupt 25 active +#define NVIC_ACTIVE0_INT24 0x01000000 // Interrupt 24 active +#define NVIC_ACTIVE0_INT23 0x00800000 // Interrupt 23 active +#define NVIC_ACTIVE0_INT22 0x00400000 // Interrupt 22 active +#define NVIC_ACTIVE0_INT21 0x00200000 // Interrupt 21 active +#define NVIC_ACTIVE0_INT20 0x00100000 // Interrupt 20 active +#define NVIC_ACTIVE0_INT19 0x00080000 // Interrupt 19 active +#define NVIC_ACTIVE0_INT18 0x00040000 // Interrupt 18 active +#define NVIC_ACTIVE0_INT17 0x00020000 // Interrupt 17 active +#define NVIC_ACTIVE0_INT16 0x00010000 // Interrupt 16 active +#define NVIC_ACTIVE0_INT15 0x00008000 // Interrupt 15 active +#define NVIC_ACTIVE0_INT14 0x00004000 // Interrupt 14 active +#define NVIC_ACTIVE0_INT13 0x00002000 // Interrupt 13 active +#define NVIC_ACTIVE0_INT12 0x00001000 // Interrupt 12 active +#define NVIC_ACTIVE0_INT11 0x00000800 // Interrupt 11 active +#define NVIC_ACTIVE0_INT10 0x00000400 // Interrupt 10 active +#define NVIC_ACTIVE0_INT9 0x00000200 // Interrupt 9 active +#define NVIC_ACTIVE0_INT8 0x00000100 // Interrupt 8 active +#define NVIC_ACTIVE0_INT7 0x00000080 // Interrupt 7 active +#define NVIC_ACTIVE0_INT6 0x00000040 // Interrupt 6 active +#define NVIC_ACTIVE0_INT5 0x00000020 // Interrupt 5 active +#define NVIC_ACTIVE0_INT4 0x00000010 // Interrupt 4 active +#define NVIC_ACTIVE0_INT3 0x00000008 // Interrupt 3 active +#define NVIC_ACTIVE0_INT2 0x00000004 // Interrupt 2 active +#define NVIC_ACTIVE0_INT1 0x00000002 // Interrupt 1 active +#define NVIC_ACTIVE0_INT0 0x00000001 // Interrupt 0 active + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_ACTIVE1 register. +// +//***************************************************************************** +#define NVIC_ACTIVE1_INT59 0x08000000 // Interrupt 59 active +#define NVIC_ACTIVE1_INT58 0x04000000 // Interrupt 58 active +#define NVIC_ACTIVE1_INT57 0x02000000 // Interrupt 57 active +#define NVIC_ACTIVE1_INT56 0x01000000 // Interrupt 56 active +#define NVIC_ACTIVE1_INT55 0x00800000 // Interrupt 55 active +#define NVIC_ACTIVE1_INT54 0x00400000 // Interrupt 54 active +#define NVIC_ACTIVE1_INT53 0x00200000 // Interrupt 53 active +#define NVIC_ACTIVE1_INT52 0x00100000 // Interrupt 52 active +#define NVIC_ACTIVE1_INT51 0x00080000 // Interrupt 51 active +#define NVIC_ACTIVE1_INT50 0x00040000 // Interrupt 50 active +#define NVIC_ACTIVE1_INT49 0x00020000 // Interrupt 49 active +#define NVIC_ACTIVE1_INT48 0x00010000 // Interrupt 48 active +#define NVIC_ACTIVE1_INT47 0x00008000 // Interrupt 47 active +#define NVIC_ACTIVE1_INT46 0x00004000 // Interrupt 46 active +#define NVIC_ACTIVE1_INT45 0x00002000 // Interrupt 45 active +#define NVIC_ACTIVE1_INT44 0x00001000 // Interrupt 44 active +#define NVIC_ACTIVE1_INT43 0x00000800 // Interrupt 43 active +#define NVIC_ACTIVE1_INT42 0x00000400 // Interrupt 42 active +#define NVIC_ACTIVE1_INT41 0x00000200 // Interrupt 41 active +#define NVIC_ACTIVE1_INT40 0x00000100 // Interrupt 40 active +#define NVIC_ACTIVE1_INT39 0x00000080 // Interrupt 39 active +#define NVIC_ACTIVE1_INT38 0x00000040 // Interrupt 38 active +#define NVIC_ACTIVE1_INT37 0x00000020 // Interrupt 37 active +#define NVIC_ACTIVE1_INT36 0x00000010 // Interrupt 36 active +#define NVIC_ACTIVE1_INT35 0x00000008 // Interrupt 35 active +#define NVIC_ACTIVE1_INT34 0x00000004 // Interrupt 34 active +#define NVIC_ACTIVE1_INT33 0x00000002 // Interrupt 33 active +#define NVIC_ACTIVE1_INT32 0x00000001 // Interrupt 32 active + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI0 register. +// +//***************************************************************************** +#define NVIC_PRI0_INT3_M 0xFF000000 // Interrupt 3 priority mask +#define NVIC_PRI0_INT2_M 0x00FF0000 // Interrupt 2 priority mask +#define NVIC_PRI0_INT1_M 0x0000FF00 // Interrupt 1 priority mask +#define NVIC_PRI0_INT0_M 0x000000FF // Interrupt 0 priority mask +#define NVIC_PRI0_INT3_S 24 +#define NVIC_PRI0_INT2_S 16 +#define NVIC_PRI0_INT1_S 8 +#define NVIC_PRI0_INT0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI1 register. +// +//***************************************************************************** +#define NVIC_PRI1_INT7_M 0xFF000000 // Interrupt 7 priority mask +#define NVIC_PRI1_INT6_M 0x00FF0000 // Interrupt 6 priority mask +#define NVIC_PRI1_INT5_M 0x0000FF00 // Interrupt 5 priority mask +#define NVIC_PRI1_INT4_M 0x000000FF // Interrupt 4 priority mask +#define NVIC_PRI1_INT7_S 24 +#define NVIC_PRI1_INT6_S 16 +#define NVIC_PRI1_INT5_S 8 +#define NVIC_PRI1_INT4_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI2 register. +// +//***************************************************************************** +#define NVIC_PRI2_INT11_M 0xFF000000 // Interrupt 11 priority mask +#define NVIC_PRI2_INT10_M 0x00FF0000 // Interrupt 10 priority mask +#define NVIC_PRI2_INT9_M 0x0000FF00 // Interrupt 9 priority mask +#define NVIC_PRI2_INT8_M 0x000000FF // Interrupt 8 priority mask +#define NVIC_PRI2_INT11_S 24 +#define NVIC_PRI2_INT10_S 16 +#define NVIC_PRI2_INT9_S 8 +#define NVIC_PRI2_INT8_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI3 register. +// +//***************************************************************************** +#define NVIC_PRI3_INT15_M 0xFF000000 // Interrupt 15 priority mask +#define NVIC_PRI3_INT14_M 0x00FF0000 // Interrupt 14 priority mask +#define NVIC_PRI3_INT13_M 0x0000FF00 // Interrupt 13 priority mask +#define NVIC_PRI3_INT12_M 0x000000FF // Interrupt 12 priority mask +#define NVIC_PRI3_INT15_S 24 +#define NVIC_PRI3_INT14_S 16 +#define NVIC_PRI3_INT13_S 8 +#define NVIC_PRI3_INT12_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI4 register. +// +//***************************************************************************** +#define NVIC_PRI4_INT19_M 0xFF000000 // Interrupt 19 priority mask +#define NVIC_PRI4_INT18_M 0x00FF0000 // Interrupt 18 priority mask +#define NVIC_PRI4_INT17_M 0x0000FF00 // Interrupt 17 priority mask +#define NVIC_PRI4_INT16_M 0x000000FF // Interrupt 16 priority mask +#define NVIC_PRI4_INT19_S 24 +#define NVIC_PRI4_INT18_S 16 +#define NVIC_PRI4_INT17_S 8 +#define NVIC_PRI4_INT16_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI5 register. +// +//***************************************************************************** +#define NVIC_PRI5_INT23_M 0xFF000000 // Interrupt 23 priority mask +#define NVIC_PRI5_INT22_M 0x00FF0000 // Interrupt 22 priority mask +#define NVIC_PRI5_INT21_M 0x0000FF00 // Interrupt 21 priority mask +#define NVIC_PRI5_INT20_M 0x000000FF // Interrupt 20 priority mask +#define NVIC_PRI5_INT23_S 24 +#define NVIC_PRI5_INT22_S 16 +#define NVIC_PRI5_INT21_S 8 +#define NVIC_PRI5_INT20_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI6 register. +// +//***************************************************************************** +#define NVIC_PRI6_INT27_M 0xFF000000 // Interrupt 27 priority mask +#define NVIC_PRI6_INT26_M 0x00FF0000 // Interrupt 26 priority mask +#define NVIC_PRI6_INT25_M 0x0000FF00 // Interrupt 25 priority mask +#define NVIC_PRI6_INT24_M 0x000000FF // Interrupt 24 priority mask +#define NVIC_PRI6_INT27_S 24 +#define NVIC_PRI6_INT26_S 16 +#define NVIC_PRI6_INT25_S 8 +#define NVIC_PRI6_INT24_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI7 register. +// +//***************************************************************************** +#define NVIC_PRI7_INT31_M 0xFF000000 // Interrupt 31 priority mask +#define NVIC_PRI7_INT30_M 0x00FF0000 // Interrupt 30 priority mask +#define NVIC_PRI7_INT29_M 0x0000FF00 // Interrupt 29 priority mask +#define NVIC_PRI7_INT28_M 0x000000FF // Interrupt 28 priority mask +#define NVIC_PRI7_INT31_S 24 +#define NVIC_PRI7_INT30_S 16 +#define NVIC_PRI7_INT29_S 8 +#define NVIC_PRI7_INT28_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI8 register. +// +//***************************************************************************** +#define NVIC_PRI8_INT35_M 0xFF000000 // Interrupt 35 priority mask +#define NVIC_PRI8_INT34_M 0x00FF0000 // Interrupt 34 priority mask +#define NVIC_PRI8_INT33_M 0x0000FF00 // Interrupt 33 priority mask +#define NVIC_PRI8_INT32_M 0x000000FF // Interrupt 32 priority mask +#define NVIC_PRI8_INT35_S 24 +#define NVIC_PRI8_INT34_S 16 +#define NVIC_PRI8_INT33_S 8 +#define NVIC_PRI8_INT32_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI9 register. +// +//***************************************************************************** +#define NVIC_PRI9_INT39_M 0xFF000000 // Interrupt 39 priority mask +#define NVIC_PRI9_INT38_M 0x00FF0000 // Interrupt 38 priority mask +#define NVIC_PRI9_INT37_M 0x0000FF00 // Interrupt 37 priority mask +#define NVIC_PRI9_INT36_M 0x000000FF // Interrupt 36 priority mask +#define NVIC_PRI9_INT39_S 24 +#define NVIC_PRI9_INT38_S 16 +#define NVIC_PRI9_INT37_S 8 +#define NVIC_PRI9_INT36_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI10 register. +// +//***************************************************************************** +#define NVIC_PRI10_INT43_M 0xFF000000 // Interrupt 43 priority mask +#define NVIC_PRI10_INT42_M 0x00FF0000 // Interrupt 42 priority mask +#define NVIC_PRI10_INT41_M 0x0000FF00 // Interrupt 41 priority mask +#define NVIC_PRI10_INT40_M 0x000000FF // Interrupt 40 priority mask +#define NVIC_PRI10_INT43_S 24 +#define NVIC_PRI10_INT42_S 16 +#define NVIC_PRI10_INT41_S 8 +#define NVIC_PRI10_INT40_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_CPUID register. +// +//***************************************************************************** +#define NVIC_CPUID_IMP_M 0xFF000000 // Implementer +#define NVIC_CPUID_VAR_M 0x00F00000 // Variant +#define NVIC_CPUID_PARTNO_M 0x0000FFF0 // Processor part number +#define NVIC_CPUID_REV_M 0x0000000F // Revision + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_INT_CTRL register. +// +//***************************************************************************** +#define NVIC_INT_CTRL_NMI_SET 0x80000000 // Pend a NMI +#define NVIC_INT_CTRL_PEND_SV 0x10000000 // Pend a PendSV +#define NVIC_INT_CTRL_UNPEND_SV 0x08000000 // Unpend a PendSV +#define NVIC_INT_CTRL_PENDSTSET 0x04000000 // Set pending SysTick interrupt +#define NVIC_INT_CTRL_PENDSTCLR 0x02000000 // Clear pending SysTick interrupt +#define NVIC_INT_CTRL_ISR_PRE 0x00800000 // Debug interrupt handling +#define NVIC_INT_CTRL_ISR_PEND 0x00400000 // Debug interrupt pending +#define NVIC_INT_CTRL_VEC_PEN_M 0x003FF000 // Highest pending exception +#define NVIC_INT_CTRL_RET_BASE 0x00000800 // Return to base +#define NVIC_INT_CTRL_VEC_ACT_M 0x000003FF // Current active exception +#define NVIC_INT_CTRL_VEC_PEN_S 12 +#define NVIC_INT_CTRL_VEC_ACT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_VTABLE register. +// +//***************************************************************************** +#define NVIC_VTABLE_BASE 0x20000000 // Vector table base +#define NVIC_VTABLE_OFFSET_M 0x1FFFFF00 // Vector table offset +#define NVIC_VTABLE_OFFSET_S 8 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_APINT register. +// +//***************************************************************************** +#define NVIC_APINT_VECTKEY_M 0xFFFF0000 // Vector key mask +#define NVIC_APINT_VECTKEY 0x05FA0000 // Vector key +#define NVIC_APINT_ENDIANESS 0x00008000 // Data endianess +#define NVIC_APINT_PRIGROUP_M 0x00000700 // Priority group +#define NVIC_APINT_PRIGROUP_7_1 0x00000000 // Priority group 7.1 split +#define NVIC_APINT_PRIGROUP_6_2 0x00000100 // Priority group 6.2 split +#define NVIC_APINT_PRIGROUP_5_3 0x00000200 // Priority group 5.3 split +#define NVIC_APINT_PRIGROUP_4_4 0x00000300 // Priority group 4.4 split +#define NVIC_APINT_PRIGROUP_3_5 0x00000400 // Priority group 3.5 split +#define NVIC_APINT_PRIGROUP_2_6 0x00000500 // Priority group 2.6 split +#define NVIC_APINT_PRIGROUP_1_7 0x00000600 // Priority group 1.7 split +#define NVIC_APINT_PRIGROUP_0_8 0x00000700 // Priority group 0.8 split +#define NVIC_APINT_SYSRESETREQ 0x00000004 // System reset request +#define NVIC_APINT_VECT_CLR_ACT 0x00000002 // Clear active NMI/fault info +#define NVIC_APINT_VECT_RESET 0x00000001 // System reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_SYS_CTRL register. +// +//***************************************************************************** +#define NVIC_SYS_CTRL_SEVONPEND 0x00000010 // Wakeup on pend +#define NVIC_SYS_CTRL_SLEEPDEEP 0x00000004 // Deep sleep enable +#define NVIC_SYS_CTRL_SLEEPEXIT 0x00000002 // Sleep on ISR exit + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_CFG_CTRL register. +// +//***************************************************************************** +#define NVIC_CFG_CTRL_BFHFNMIGN 0x00000100 // Ignore bus fault in NMI/fault +#define NVIC_CFG_CTRL_DIV0 0x00000010 // Trap on divide by 0 +#define NVIC_CFG_CTRL_UNALIGNED 0x00000008 // Trap on unaligned access +#define NVIC_CFG_CTRL_DEEP_PEND 0x00000004 // Allow deep interrupt trigger +#define NVIC_CFG_CTRL_MAIN_PEND 0x00000002 // Allow main interrupt trigger +#define NVIC_CFG_CTRL_BASE_THR 0x00000001 // Thread state control + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_SYS_PRI1 register. +// +//***************************************************************************** +#define NVIC_SYS_PRI1_RES_M 0xFF000000 // Priority of reserved handler +#define NVIC_SYS_PRI1_USAGE_M 0x00FF0000 // Priority of usage fault handler +#define NVIC_SYS_PRI1_BUS_M 0x0000FF00 // Priority of bus fault handler +#define NVIC_SYS_PRI1_MEM_M 0x000000FF // Priority of mem manage handler +#define NVIC_SYS_PRI1_USAGE_S 16 +#define NVIC_SYS_PRI1_BUS_S 8 +#define NVIC_SYS_PRI1_MEM_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_SYS_PRI2 register. +// +//***************************************************************************** +#define NVIC_SYS_PRI2_SVC_M 0xFF000000 // Priority of SVCall handler +#define NVIC_SYS_PRI2_RES_M 0x00FFFFFF // Priority of reserved handlers +#define NVIC_SYS_PRI2_SVC_S 24 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_SYS_PRI3 register. +// +//***************************************************************************** +#define NVIC_SYS_PRI3_TICK_M 0xFF000000 // Priority of Sys Tick handler +#define NVIC_SYS_PRI3_PENDSV_M 0x00FF0000 // Priority of PendSV handler +#define NVIC_SYS_PRI3_RES_M 0x0000FF00 // Priority of reserved handler +#define NVIC_SYS_PRI3_DEBUG_M 0x000000FF // Priority of debug handler +#define NVIC_SYS_PRI3_TICK_S 24 +#define NVIC_SYS_PRI3_PENDSV_S 16 +#define NVIC_SYS_PRI3_DEBUG_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_SYS_HND_CTRL +// register. +// +//***************************************************************************** +#define NVIC_SYS_HND_CTRL_USAGE 0x00040000 // Usage fault enable +#define NVIC_SYS_HND_CTRL_BUS 0x00020000 // Bus fault enable +#define NVIC_SYS_HND_CTRL_MEM 0x00010000 // Mem manage fault enable +#define NVIC_SYS_HND_CTRL_SVC 0x00008000 // SVCall is pended +#define NVIC_SYS_HND_CTRL_BUSP 0x00004000 // Bus fault is pended +#define NVIC_SYS_HND_CTRL_TICK 0x00000800 // Sys tick is active +#define NVIC_SYS_HND_CTRL_PNDSV 0x00000400 // PendSV is active +#define NVIC_SYS_HND_CTRL_MON 0x00000100 // Monitor is active +#define NVIC_SYS_HND_CTRL_SVCA 0x00000080 // SVCall is active +#define NVIC_SYS_HND_CTRL_USGA 0x00000008 // Usage fault is active +#define NVIC_SYS_HND_CTRL_BUSA 0x00000002 // Bus fault is active +#define NVIC_SYS_HND_CTRL_MEMA 0x00000001 // Mem manage is active + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_FAULT_STAT +// register. +// +//***************************************************************************** +#define NVIC_FAULT_STAT_DIV0 0x02000000 // Divide by zero fault +#define NVIC_FAULT_STAT_UNALIGN 0x01000000 // Unaligned access fault +#define NVIC_FAULT_STAT_NOCP 0x00080000 // No coprocessor fault +#define NVIC_FAULT_STAT_INVPC 0x00040000 // Invalid PC fault +#define NVIC_FAULT_STAT_INVSTAT 0x00020000 // Invalid state fault +#define NVIC_FAULT_STAT_UNDEF 0x00010000 // Undefined instruction fault +#define NVIC_FAULT_STAT_BFARV 0x00008000 // BFAR is valid +#define NVIC_FAULT_STAT_BSTKE 0x00001000 // Stack bus fault +#define NVIC_FAULT_STAT_BUSTKE 0x00000800 // Unstack bus fault +#define NVIC_FAULT_STAT_IMPRE 0x00000400 // Imprecise data bus error +#define NVIC_FAULT_STAT_PRECISE 0x00000200 // Precise data bus error +#define NVIC_FAULT_STAT_IBUS 0x00000100 // Instruction bus fault +#define NVIC_FAULT_STAT_MMARV 0x00000080 // MMAR is valid +#define NVIC_FAULT_STAT_MSTKE 0x00000010 // Stack access violation +#define NVIC_FAULT_STAT_MUSTKE 0x00000008 // Unstack access violation +#define NVIC_FAULT_STAT_DERR 0x00000002 // Data access violation +#define NVIC_FAULT_STAT_IERR 0x00000001 // Instruction access violation + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_HFAULT_STAT +// register. +// +//***************************************************************************** +#define NVIC_HFAULT_STAT_DBG 0x80000000 // Debug event +#define NVIC_HFAULT_STAT_FORCED 0x40000000 // Cannot execute fault handler +#define NVIC_HFAULT_STAT_VECT 0x00000002 // Vector table read fault + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_DEBUG_STAT +// register. +// +//***************************************************************************** +#define NVIC_DEBUG_STAT_EXTRNL 0x00000010 // EDBGRQ asserted +#define NVIC_DEBUG_STAT_VCATCH 0x00000008 // Vector catch +#define NVIC_DEBUG_STAT_DWTTRAP 0x00000004 // DWT match +#define NVIC_DEBUG_STAT_BKPT 0x00000002 // Breakpoint instruction +#define NVIC_DEBUG_STAT_HALTED 0x00000001 // Halt request + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_MM_ADDR register. +// +//***************************************************************************** +#define NVIC_MM_ADDR_M 0xFFFFFFFF // Data fault address +#define NVIC_MM_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_FAULT_ADDR +// register. +// +//***************************************************************************** +#define NVIC_FAULT_ADDR_M 0xFFFFFFFF // Data bus fault address +#define NVIC_FAULT_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_MPU_TYPE register. +// +//***************************************************************************** +#define NVIC_MPU_TYPE_IREGION_M 0x00FF0000 // Number of I regions +#define NVIC_MPU_TYPE_DREGION_M 0x0000FF00 // Number of D regions +#define NVIC_MPU_TYPE_SEPARATE 0x00000001 // Separate or unified MPU +#define NVIC_MPU_TYPE_IREGION_S 16 +#define NVIC_MPU_TYPE_DREGION_S 8 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_MPU_CTRL register. +// +//***************************************************************************** +#define NVIC_MPU_CTRL_PRIVDEFEN 0x00000004 // MPU default region in priv mode +#define NVIC_MPU_CTRL_HFNMIENA 0x00000002 // MPU enabled during faults +#define NVIC_MPU_CTRL_ENABLE 0x00000001 // MPU enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_MPU_NUMBER +// register. +// +//***************************************************************************** +#define NVIC_MPU_NUMBER_M 0x000000FF // MPU region to access +#define NVIC_MPU_NUMBER_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_MPU_BASE register. +// +//***************************************************************************** +#define NVIC_MPU_BASE_ADDR_M 0xFFFFFFE0 // Base address mask +#define NVIC_MPU_BASE_VALID 0x00000010 // Region number valid +#define NVIC_MPU_BASE_REGION_M 0x0000000F // Region number +#define NVIC_MPU_BASE_ADDR_S 8 +#define NVIC_MPU_BASE_REGION_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_MPU_ATTR register. +// +//***************************************************************************** +#define NVIC_MPU_ATTR_M 0xFFFF0000 // Attributes +#define NVIC_MPU_ATTR_AP_NO_NO 0x00000000 // prv: no access, usr: no access +#define NVIC_MPU_ATTR_BUFFRABLE 0x00010000 // Bufferable +#define NVIC_MPU_ATTR_CACHEABLE 0x00020000 // Cacheable +#define NVIC_MPU_ATTR_SHAREABLE 0x00040000 // Shareable +#define NVIC_MPU_ATTR_TEX_M 0x00380000 // Type extension mask +#define NVIC_MPU_ATTR_AP_RW_NO 0x01000000 // prv: rw, usr: none +#define NVIC_MPU_ATTR_AP_RW_RO 0x02000000 // prv: rw, usr: read-only +#define NVIC_MPU_ATTR_AP_RW_RW 0x03000000 // prv: rw, usr: rw +#define NVIC_MPU_ATTR_AP_RO_NO 0x05000000 // prv: ro, usr: none +#define NVIC_MPU_ATTR_AP_RO_RO 0x06000000 // prv: ro, usr: ro +#define NVIC_MPU_ATTR_AP_M 0x07000000 // Access permissions mask +#define NVIC_MPU_ATTR_XN 0x10000000 // Execute disable +#define NVIC_MPU_ATTR_SRD_M 0x0000FF00 // Sub-region disable mask +#define NVIC_MPU_ATTR_SRD_0 0x00000100 // Sub-region 0 disable +#define NVIC_MPU_ATTR_SRD_1 0x00000200 // Sub-region 1 disable +#define NVIC_MPU_ATTR_SRD_2 0x00000400 // Sub-region 2 disable +#define NVIC_MPU_ATTR_SRD_3 0x00000800 // Sub-region 3 disable +#define NVIC_MPU_ATTR_SRD_4 0x00001000 // Sub-region 4 disable +#define NVIC_MPU_ATTR_SRD_5 0x00002000 // Sub-region 5 disable +#define NVIC_MPU_ATTR_SRD_6 0x00004000 // Sub-region 6 disable +#define NVIC_MPU_ATTR_SRD_7 0x00008000 // Sub-region 7 disable +#define NVIC_MPU_ATTR_SIZE_M 0x0000003E // Region size mask +#define NVIC_MPU_ATTR_SIZE_32B 0x00000008 // Region size 32 bytes +#define NVIC_MPU_ATTR_SIZE_64B 0x0000000A // Region size 64 bytes +#define NVIC_MPU_ATTR_SIZE_128B 0x0000000C // Region size 128 bytes +#define NVIC_MPU_ATTR_SIZE_256B 0x0000000E // Region size 256 bytes +#define NVIC_MPU_ATTR_SIZE_512B 0x00000010 // Region size 512 bytes +#define NVIC_MPU_ATTR_SIZE_1K 0x00000012 // Region size 1 Kbytes +#define NVIC_MPU_ATTR_SIZE_2K 0x00000014 // Region size 2 Kbytes +#define NVIC_MPU_ATTR_SIZE_4K 0x00000016 // Region size 4 Kbytes +#define NVIC_MPU_ATTR_SIZE_8K 0x00000018 // Region size 8 Kbytes +#define NVIC_MPU_ATTR_SIZE_16K 0x0000001A // Region size 16 Kbytes +#define NVIC_MPU_ATTR_SIZE_32K 0x0000001C // Region size 32 Kbytes +#define NVIC_MPU_ATTR_SIZE_64K 0x0000001E // Region size 64 Kbytes +#define NVIC_MPU_ATTR_SIZE_128K 0x00000020 // Region size 128 Kbytes +#define NVIC_MPU_ATTR_SIZE_256K 0x00000022 // Region size 256 Kbytes +#define NVIC_MPU_ATTR_SIZE_512K 0x00000024 // Region size 512 Kbytes +#define NVIC_MPU_ATTR_SIZE_1M 0x00000026 // Region size 1 Mbytes +#define NVIC_MPU_ATTR_SIZE_2M 0x00000028 // Region size 2 Mbytes +#define NVIC_MPU_ATTR_SIZE_4M 0x0000002A // Region size 4 Mbytes +#define NVIC_MPU_ATTR_SIZE_8M 0x0000002C // Region size 8 Mbytes +#define NVIC_MPU_ATTR_SIZE_16M 0x0000002E // Region size 16 Mbytes +#define NVIC_MPU_ATTR_SIZE_32M 0x00000030 // Region size 32 Mbytes +#define NVIC_MPU_ATTR_SIZE_64M 0x00000032 // Region size 64 Mbytes +#define NVIC_MPU_ATTR_SIZE_128M 0x00000034 // Region size 128 Mbytes +#define NVIC_MPU_ATTR_SIZE_256M 0x00000036 // Region size 256 Mbytes +#define NVIC_MPU_ATTR_SIZE_512M 0x00000038 // Region size 512 Mbytes +#define NVIC_MPU_ATTR_SIZE_1G 0x0000003A // Region size 1 Gbytes +#define NVIC_MPU_ATTR_SIZE_2G 0x0000003C // Region size 2 Gbytes +#define NVIC_MPU_ATTR_SIZE_4G 0x0000003E // Region size 4 Gbytes +#define NVIC_MPU_ATTR_ENABLE 0x00000001 // Region enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_DBG_CTRL register. +// +//***************************************************************************** +#define NVIC_DBG_CTRL_DBGKEY_M 0xFFFF0000 // Debug key mask +#define NVIC_DBG_CTRL_DBGKEY 0xA05F0000 // Debug key +#define NVIC_DBG_CTRL_S_RESET_ST \ + 0x02000000 // Core has reset since last read +#define NVIC_DBG_CTRL_S_RETIRE_ST \ + 0x01000000 // Core has executed insruction + // since last read +#define NVIC_DBG_CTRL_S_LOCKUP 0x00080000 // Core is locked up +#define NVIC_DBG_CTRL_S_SLEEP 0x00040000 // Core is sleeping +#define NVIC_DBG_CTRL_S_HALT 0x00020000 // Core status on halt +#define NVIC_DBG_CTRL_S_REGRDY 0x00010000 // Register read/write available +#define NVIC_DBG_CTRL_C_SNAPSTALL \ + 0x00000020 // Breaks a stalled load/store +#define NVIC_DBG_CTRL_C_MASKINT 0x00000008 // Mask interrupts when stepping +#define NVIC_DBG_CTRL_C_STEP 0x00000004 // Step the core +#define NVIC_DBG_CTRL_C_HALT 0x00000002 // Halt the core +#define NVIC_DBG_CTRL_C_DEBUGEN 0x00000001 // Enable debug + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_DBG_XFER register. +// +//***************************************************************************** +#define NVIC_DBG_XFER_REG_WNR 0x00010000 // Write or not read +#define NVIC_DBG_XFER_REG_SEL_M 0x0000001F // Register +#define NVIC_DBG_XFER_REG_R0 0x00000000 // Register R0 +#define NVIC_DBG_XFER_REG_R1 0x00000001 // Register R1 +#define NVIC_DBG_XFER_REG_R2 0x00000002 // Register R2 +#define NVIC_DBG_XFER_REG_R3 0x00000003 // Register R3 +#define NVIC_DBG_XFER_REG_R4 0x00000004 // Register R4 +#define NVIC_DBG_XFER_REG_R5 0x00000005 // Register R5 +#define NVIC_DBG_XFER_REG_R6 0x00000006 // Register R6 +#define NVIC_DBG_XFER_REG_R7 0x00000007 // Register R7 +#define NVIC_DBG_XFER_REG_R8 0x00000008 // Register R8 +#define NVIC_DBG_XFER_REG_R9 0x00000009 // Register R9 +#define NVIC_DBG_XFER_REG_R10 0x0000000A // Register R10 +#define NVIC_DBG_XFER_REG_R11 0x0000000B // Register R11 +#define NVIC_DBG_XFER_REG_R12 0x0000000C // Register R12 +#define NVIC_DBG_XFER_REG_R13 0x0000000D // Register R13 +#define NVIC_DBG_XFER_REG_R14 0x0000000E // Register R14 +#define NVIC_DBG_XFER_REG_R15 0x0000000F // Register R15 +#define NVIC_DBG_XFER_REG_FLAGS 0x00000010 // xPSR/Flags register +#define NVIC_DBG_XFER_REG_MSP 0x00000011 // Main SP +#define NVIC_DBG_XFER_REG_PSP 0x00000012 // Process SP +#define NVIC_DBG_XFER_REG_DSP 0x00000013 // Deep SP +#define NVIC_DBG_XFER_REG_CFBP 0x00000014 // Control/Fault/BasePri/PriMask + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_DBG_DATA register. +// +//***************************************************************************** +#define NVIC_DBG_DATA_M 0xFFFFFFFF // Data temporary cache +#define NVIC_DBG_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_DBG_INT register. +// +//***************************************************************************** +#define NVIC_DBG_INT_HARDERR 0x00000400 // Debug trap on hard fault +#define NVIC_DBG_INT_INTERR 0x00000200 // Debug trap on interrupt errors +#define NVIC_DBG_INT_BUSERR 0x00000100 // Debug trap on bus error +#define NVIC_DBG_INT_STATERR 0x00000080 // Debug trap on usage fault state +#define NVIC_DBG_INT_CHKERR 0x00000040 // Debug trap on usage fault check +#define NVIC_DBG_INT_NOCPERR 0x00000020 // Debug trap on coprocessor error +#define NVIC_DBG_INT_MMERR 0x00000010 // Debug trap on mem manage fault +#define NVIC_DBG_INT_RESET 0x00000008 // Core reset status +#define NVIC_DBG_INT_RSTPENDCLR 0x00000004 // Clear pending core reset +#define NVIC_DBG_INT_RSTPENDING 0x00000002 // Core reset is pending +#define NVIC_DBG_INT_RSTVCATCH 0x00000001 // Reset vector catch + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_SW_TRIG register. +// +//***************************************************************************** +#define NVIC_SW_TRIG_INTID_M 0x000003FF // Interrupt to trigger +#define NVIC_SW_TRIG_INTID_S 0 + +#endif // __HW_NVIC_H__ diff --git a/bsp/lm3s_9b9x/Libraries/inc/hw_pwm.h b/bsp/lm3s_9b9x/Libraries/inc/hw_pwm.h new file mode 100644 index 0000000000000000000000000000000000000000..2e7e41ac1dd0a5d6ebe3362e4b4a70febd57980b --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/inc/hw_pwm.h @@ -0,0 +1,756 @@ +//***************************************************************************** +// +// hw_pwm.h - Defines and Macros for Pulse Width Modulation (PWM) ports. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_PWM_H__ +#define __HW_PWM_H__ + +//***************************************************************************** +// +// The following are defines for the PWM register offsets. +// +//***************************************************************************** +#define PWM_O_CTL 0x00000000 // PWM Master Control +#define PWM_O_SYNC 0x00000004 // PWM Time Base Sync +#define PWM_O_ENABLE 0x00000008 // PWM Output Enable +#define PWM_O_INVERT 0x0000000C // PWM Output Inversion +#define PWM_O_FAULT 0x00000010 // PWM Output Fault +#define PWM_O_INTEN 0x00000014 // PWM Interrupt Enable +#define PWM_O_RIS 0x00000018 // PWM Raw Interrupt Status +#define PWM_O_ISC 0x0000001C // PWM Interrupt Status and Clear +#define PWM_O_STATUS 0x00000020 // PWM Status +#define PWM_O_FAULTVAL 0x00000024 // PWM Fault Condition Value +#define PWM_O_ENUPD 0x00000028 // PWM Enable Update +#define PWM_O_0_CTL 0x00000040 // PWM0 Control +#define PWM_O_0_INTEN 0x00000044 // PWM0 Interrupt and Trigger + // Enable +#define PWM_O_0_RIS 0x00000048 // PWM0 Raw Interrupt Status +#define PWM_O_0_ISC 0x0000004C // PWM0 Interrupt Status and Clear +#define PWM_O_0_LOAD 0x00000050 // PWM0 Load +#define PWM_O_0_COUNT 0x00000054 // PWM0 Counter +#define PWM_O_0_CMPA 0x00000058 // PWM0 Compare A +#define PWM_O_0_CMPB 0x0000005C // PWM0 Compare B +#define PWM_O_0_GENA 0x00000060 // PWM0 Generator A Control +#define PWM_O_0_GENB 0x00000064 // PWM0 Generator B Control +#define PWM_O_0_DBCTL 0x00000068 // PWM0 Dead-Band Control +#define PWM_O_0_DBRISE 0x0000006C // PWM0 Dead-Band Rising-Edge Delay +#define PWM_O_0_DBFALL 0x00000070 // PWM0 Dead-Band + // Falling-Edge-Delay +#define PWM_O_0_FLTSRC0 0x00000074 // PWM0 Fault Source 0 +#define PWM_O_0_FLTSRC1 0x00000078 // PWM0 Fault Source 1 +#define PWM_O_0_MINFLTPER 0x0000007C // PWM0 Minimum Fault Period +#define PWM_O_1_CTL 0x00000080 // PWM1 Control +#define PWM_O_1_INTEN 0x00000084 // PWM1 Interrupt and Trigger + // Enable +#define PWM_O_1_RIS 0x00000088 // PWM1 Raw Interrupt Status +#define PWM_O_1_ISC 0x0000008C // PWM1 Interrupt Status and Clear +#define PWM_O_1_LOAD 0x00000090 // PWM1 Load +#define PWM_O_1_COUNT 0x00000094 // PWM1 Counter +#define PWM_O_1_CMPA 0x00000098 // PWM1 Compare A +#define PWM_O_1_CMPB 0x0000009C // PWM1 Compare B +#define PWM_O_1_GENA 0x000000A0 // PWM1 Generator A Control +#define PWM_O_1_GENB 0x000000A4 // PWM1 Generator B Control +#define PWM_O_1_DBCTL 0x000000A8 // PWM1 Dead-Band Control +#define PWM_O_1_DBRISE 0x000000AC // PWM1 Dead-Band Rising-Edge Delay +#define PWM_O_1_DBFALL 0x000000B0 // PWM1 Dead-Band + // Falling-Edge-Delay +#define PWM_O_1_FLTSRC0 0x000000B4 // PWM1 Fault Source 0 +#define PWM_O_1_FLTSRC1 0x000000B8 // PWM1 Fault Source 1 +#define PWM_O_1_MINFLTPER 0x000000BC // PWM1 Minimum Fault Period +#define PWM_O_2_CTL 0x000000C0 // PWM2 Control +#define PWM_O_2_INTEN 0x000000C4 // PWM2 Interrupt and Trigger + // Enable +#define PWM_O_2_RIS 0x000000C8 // PWM2 Raw Interrupt Status +#define PWM_O_2_ISC 0x000000CC // PWM2 Interrupt Status and Clear +#define PWM_O_2_LOAD 0x000000D0 // PWM2 Load +#define PWM_O_2_COUNT 0x000000D4 // PWM2 Counter +#define PWM_O_2_CMPA 0x000000D8 // PWM2 Compare A +#define PWM_O_2_CMPB 0x000000DC // PWM2 Compare B +#define PWM_O_2_GENA 0x000000E0 // PWM2 Generator A Control +#define PWM_O_2_GENB 0x000000E4 // PWM2 Generator B Control +#define PWM_O_2_DBCTL 0x000000E8 // PWM2 Dead-Band Control +#define PWM_O_2_DBRISE 0x000000EC // PWM2 Dead-Band Rising-Edge Delay +#define PWM_O_2_DBFALL 0x000000F0 // PWM2 Dead-Band + // Falling-Edge-Delay +#define PWM_O_2_FLTSRC0 0x000000F4 // PWM2 Fault Source 0 +#define PWM_O_2_FLTSRC1 0x000000F8 // PWM2 Fault Source 1 +#define PWM_O_2_MINFLTPER 0x000000FC // PWM2 Minimum Fault Period +#define PWM_O_3_CTL 0x00000100 // PWM3 Control +#define PWM_O_3_INTEN 0x00000104 // PWM3 Interrupt and Trigger + // Enable +#define PWM_O_3_RIS 0x00000108 // PWM3 Raw Interrupt Status +#define PWM_O_3_ISC 0x0000010C // PWM3 Interrupt Status and Clear +#define PWM_O_3_LOAD 0x00000110 // PWM3 Load +#define PWM_O_3_COUNT 0x00000114 // PWM3 Counter +#define PWM_O_3_CMPA 0x00000118 // PWM3 Compare A +#define PWM_O_3_CMPB 0x0000011C // PWM3 Compare B +#define PWM_O_3_GENA 0x00000120 // PWM3 Generator A Control +#define PWM_O_3_GENB 0x00000124 // PWM3 Generator B Control +#define PWM_O_3_DBCTL 0x00000128 // PWM3 Dead-Band Control +#define PWM_O_3_DBRISE 0x0000012C // PWM3 Dead-Band Rising-Edge Delay +#define PWM_O_3_DBFALL 0x00000130 // PWM3 Dead-Band + // Falling-Edge-Delay +#define PWM_O_3_FLTSRC0 0x00000134 // PWM3 Fault Source 0 +#define PWM_O_3_FLTSRC1 0x00000138 // PWM3 Fault Source 1 +#define PWM_O_3_MINFLTPER 0x0000013C // PWM3 Minimum Fault Period +#define PWM_O_0_FLTSEN 0x00000800 // PWM0 Fault Pin Logic Sense +#define PWM_O_0_FLTSTAT0 0x00000804 // PWM0 Fault Status 0 +#define PWM_O_0_FLTSTAT1 0x00000808 // PWM0 Fault Status 1 +#define PWM_O_1_FLTSEN 0x00000880 // PWM1 Fault Pin Logic Sense +#define PWM_O_1_FLTSTAT0 0x00000884 // PWM1 Fault Status 0 +#define PWM_O_1_FLTSTAT1 0x00000888 // PWM1 Fault Status 1 +#define PWM_O_2_FLTSEN 0x00000900 // PWM2 Fault Pin Logic Sense +#define PWM_O_2_FLTSTAT0 0x00000904 // PWM2 Fault Status 0 +#define PWM_O_2_FLTSTAT1 0x00000908 // PWM2 Fault Status 1 +#define PWM_O_3_FLTSEN 0x00000980 // PWM3 Fault Pin Logic Sense +#define PWM_O_3_FLTSTAT0 0x00000984 // PWM3 Fault Status 0 +#define PWM_O_3_FLTSTAT1 0x00000988 // PWM3 Fault Status 1 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_CTL register. +// +//***************************************************************************** +#define PWM_CTL_GLOBALSYNC3 0x00000008 // Update PWM Generator 3 +#define PWM_CTL_GLOBALSYNC2 0x00000004 // Update PWM Generator 2 +#define PWM_CTL_GLOBALSYNC1 0x00000002 // Update PWM Generator 1 +#define PWM_CTL_GLOBALSYNC0 0x00000001 // Update PWM Generator 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_SYNC register. +// +//***************************************************************************** +#define PWM_SYNC_SYNC3 0x00000008 // Reset Generator 3 Counter +#define PWM_SYNC_SYNC2 0x00000004 // Reset Generator 2 Counter +#define PWM_SYNC_SYNC1 0x00000002 // Reset Generator 1 Counter +#define PWM_SYNC_SYNC0 0x00000001 // Reset Generator 0 Counter + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_ENABLE register. +// +//***************************************************************************** +#define PWM_ENABLE_PWM7EN 0x00000080 // PWM7 Output Enable +#define PWM_ENABLE_PWM6EN 0x00000040 // PWM6 Output Enable +#define PWM_ENABLE_PWM5EN 0x00000020 // PWM5 Output Enable +#define PWM_ENABLE_PWM4EN 0x00000010 // PWM4 Output Enable +#define PWM_ENABLE_PWM3EN 0x00000008 // PWM3 Output Enable +#define PWM_ENABLE_PWM2EN 0x00000004 // PWM2 Output Enable +#define PWM_ENABLE_PWM1EN 0x00000002 // PWM1 Output Enable +#define PWM_ENABLE_PWM0EN 0x00000001 // PWM0 Output Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_INVERT register. +// +//***************************************************************************** +#define PWM_INVERT_PWM7INV 0x00000080 // Invert PWM7 Signal +#define PWM_INVERT_PWM6INV 0x00000040 // Invert PWM6 Signal +#define PWM_INVERT_PWM5INV 0x00000020 // Invert PWM5 Signal +#define PWM_INVERT_PWM4INV 0x00000010 // Invert PWM4 Signal +#define PWM_INVERT_PWM3INV 0x00000008 // Invert PWM3 Signal +#define PWM_INVERT_PWM2INV 0x00000004 // Invert PWM2 Signal +#define PWM_INVERT_PWM1INV 0x00000002 // Invert PWM1 Signal +#define PWM_INVERT_PWM0INV 0x00000001 // Invert PWM0 Signal + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_FAULT register. +// +//***************************************************************************** +#define PWM_FAULT_FAULT7 0x00000080 // PWM7 Fault +#define PWM_FAULT_FAULT6 0x00000040 // PWM6 Fault +#define PWM_FAULT_FAULT5 0x00000020 // PWM5 Fault +#define PWM_FAULT_FAULT4 0x00000010 // PWM4 Fault +#define PWM_FAULT_FAULT3 0x00000008 // PWM3 Fault +#define PWM_FAULT_FAULT2 0x00000004 // PWM2 Fault +#define PWM_FAULT_FAULT1 0x00000002 // PWM1 Fault +#define PWM_FAULT_FAULT0 0x00000001 // PWM0 Fault + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_INTEN register. +// +//***************************************************************************** +#define PWM_INTEN_INTFAULT3 0x00080000 // Interrupt Fault 3 +#define PWM_INTEN_INTFAULT2 0x00040000 // Interrupt Fault 2 +#define PWM_INTEN_INTFAULT1 0x00020000 // Interrupt Fault 1 +#define PWM_INTEN_INTFAULT 0x00010000 // Fault Interrupt Enable +#define PWM_INTEN_INTFAULT0 0x00010000 // Interrupt Fault 0 +#define PWM_INTEN_INTPWM3 0x00000008 // PWM3 Interrupt Enable +#define PWM_INTEN_INTPWM2 0x00000004 // PWM2 Interrupt Enable +#define PWM_INTEN_INTPWM1 0x00000002 // PWM1 Interrupt Enable +#define PWM_INTEN_INTPWM0 0x00000001 // PWM0 Interrupt Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_RIS register. +// +//***************************************************************************** +#define PWM_RIS_INTFAULT3 0x00080000 // Interrupt Fault PWM 3 +#define PWM_RIS_INTFAULT2 0x00040000 // Interrupt Fault PWM 2 +#define PWM_RIS_INTFAULT1 0x00020000 // Interrupt Fault PWM 1 +#define PWM_RIS_INTFAULT0 0x00010000 // Interrupt Fault PWM 0 +#define PWM_RIS_INTFAULT 0x00010000 // Fault Interrupt Asserted +#define PWM_RIS_INTPWM3 0x00000008 // PWM3 Interrupt Asserted +#define PWM_RIS_INTPWM2 0x00000004 // PWM2 Interrupt Asserted +#define PWM_RIS_INTPWM1 0x00000002 // PWM1 Interrupt Asserted +#define PWM_RIS_INTPWM0 0x00000001 // PWM0 Interrupt Asserted + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_ISC register. +// +//***************************************************************************** +#define PWM_ISC_INTFAULT3 0x00080000 // FAULT3 Interrupt Asserted +#define PWM_ISC_INTFAULT2 0x00040000 // FAULT2 Interrupt Asserted +#define PWM_ISC_INTFAULT1 0x00020000 // FAULT1 Interrupt Asserted +#define PWM_ISC_INTFAULT 0x00010000 // Fault Interrupt Asserted +#define PWM_ISC_INTFAULT0 0x00010000 // FAULT0 Interrupt Asserted +#define PWM_ISC_INTPWM3 0x00000008 // PWM3 Interrupt Status +#define PWM_ISC_INTPWM2 0x00000004 // PWM2 Interrupt Status +#define PWM_ISC_INTPWM1 0x00000002 // PWM1 Interrupt Status +#define PWM_ISC_INTPWM0 0x00000001 // PWM0 Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_STATUS register. +// +//***************************************************************************** +#define PWM_STATUS_FAULT3 0x00000008 // Generator 3 Fault Status +#define PWM_STATUS_FAULT2 0x00000004 // Generator 2 Fault Status +#define PWM_STATUS_FAULT1 0x00000002 // Generator 1 Fault Status +#define PWM_STATUS_FAULT0 0x00000001 // Generator 0 Fault Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_FAULTVAL register. +// +//***************************************************************************** +#define PWM_FAULTVAL_PWM7 0x00000080 // PWM7 Fault Value +#define PWM_FAULTVAL_PWM6 0x00000040 // PWM6 Fault Value +#define PWM_FAULTVAL_PWM5 0x00000020 // PWM5 Fault Value +#define PWM_FAULTVAL_PWM4 0x00000010 // PWM4 Fault Value +#define PWM_FAULTVAL_PWM3 0x00000008 // PWM3 Fault Value +#define PWM_FAULTVAL_PWM2 0x00000004 // PWM2 Fault Value +#define PWM_FAULTVAL_PWM1 0x00000002 // PWM1 Fault Value +#define PWM_FAULTVAL_PWM0 0x00000001 // PWM0 Fault Value + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_ENUPD register. +// +//***************************************************************************** +#define PWM_ENUPD_ENUPD7_M 0x0000C000 // PWM7 Enable Update Mode +#define PWM_ENUPD_ENUPD7_IMM 0x00000000 // Immediate +#define PWM_ENUPD_ENUPD7_LSYNC 0x00008000 // Locally Synchronized +#define PWM_ENUPD_ENUPD7_GSYNC 0x0000C000 // Globally Synchronized +#define PWM_ENUPD_ENUPD6_M 0x00003000 // PWM6 Enable Update Mode +#define PWM_ENUPD_ENUPD6_IMM 0x00000000 // Immediate +#define PWM_ENUPD_ENUPD6_LSYNC 0x00002000 // Locally Synchronized +#define PWM_ENUPD_ENUPD6_GSYNC 0x00003000 // Globally Synchronized +#define PWM_ENUPD_ENUPD5_M 0x00000C00 // PWM5 Enable Update Mode +#define PWM_ENUPD_ENUPD5_IMM 0x00000000 // Immediate +#define PWM_ENUPD_ENUPD5_LSYNC 0x00000800 // Locally Synchronized +#define PWM_ENUPD_ENUPD5_GSYNC 0x00000C00 // Globally Synchronized +#define PWM_ENUPD_ENUPD4_M 0x00000300 // PWM4 Enable Update Mode +#define PWM_ENUPD_ENUPD4_IMM 0x00000000 // Immediate +#define PWM_ENUPD_ENUPD4_LSYNC 0x00000200 // Locally Synchronized +#define PWM_ENUPD_ENUPD4_GSYNC 0x00000300 // Globally Synchronized +#define PWM_ENUPD_ENUPD3_M 0x000000C0 // PWM3 Enable Update Mode +#define PWM_ENUPD_ENUPD3_IMM 0x00000000 // Immediate +#define PWM_ENUPD_ENUPD3_LSYNC 0x00000080 // Locally Synchronized +#define PWM_ENUPD_ENUPD3_GSYNC 0x000000C0 // Globally Synchronized +#define PWM_ENUPD_ENUPD2_M 0x00000030 // PWM2 Enable Update Mode +#define PWM_ENUPD_ENUPD2_IMM 0x00000000 // Immediate +#define PWM_ENUPD_ENUPD2_LSYNC 0x00000020 // Locally Synchronized +#define PWM_ENUPD_ENUPD2_GSYNC 0x00000030 // Globally Synchronized +#define PWM_ENUPD_ENUPD1_M 0x0000000C // PWM1 Enable Update Mode +#define PWM_ENUPD_ENUPD1_IMM 0x00000000 // Immediate +#define PWM_ENUPD_ENUPD1_LSYNC 0x00000008 // Locally Synchronized +#define PWM_ENUPD_ENUPD1_GSYNC 0x0000000C // Globally Synchronized +#define PWM_ENUPD_ENUPD0_M 0x00000003 // PWM0 Enable Update Mode +#define PWM_ENUPD_ENUPD0_IMM 0x00000000 // Immediate +#define PWM_ENUPD_ENUPD0_LSYNC 0x00000002 // Locally Synchronized +#define PWM_ENUPD_ENUPD0_GSYNC 0x00000003 // Globally Synchronized + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_CTL register. +// +//***************************************************************************** +#define PWM_X_CTL_LATCH 0x00040000 // Latch Fault Input +#define PWM_X_CTL_MINFLTPER 0x00020000 // Minimum Fault Period +#define PWM_X_CTL_FLTSRC 0x00010000 // Fault Condition Source +#define PWM_X_CTL_DBFALLUPD_M 0x0000C000 // PWMnDBFALL Update Mode +#define PWM_X_CTL_DBFALLUPD_I 0x00000000 // Immediate +#define PWM_X_CTL_DBFALLUPD_LS 0x00008000 // Locally Synchronized +#define PWM_X_CTL_DBFALLUPD_GS 0x0000C000 // Globally Synchronized +#define PWM_X_CTL_DBRISEUPD_M 0x00003000 // PWMnDBRISE Update Mode +#define PWM_X_CTL_DBRISEUPD_I 0x00000000 // Immediate +#define PWM_X_CTL_DBRISEUPD_LS 0x00002000 // Locally Synchronized +#define PWM_X_CTL_DBRISEUPD_GS 0x00003000 // Globally Synchronized +#define PWM_X_CTL_DBCTLUPD_M 0x00000C00 // PWMnDBCTL Update Mode +#define PWM_X_CTL_DBCTLUPD_I 0x00000000 // Immediate +#define PWM_X_CTL_DBCTLUPD_LS 0x00000800 // Locally Synchronized +#define PWM_X_CTL_DBCTLUPD_GS 0x00000C00 // Globally Synchronized +#define PWM_X_CTL_GENBUPD_M 0x00000300 // PWMnGENB Update Mode +#define PWM_X_CTL_GENBUPD_I 0x00000000 // Immediate +#define PWM_X_CTL_GENBUPD_LS 0x00000200 // Locally Synchronized +#define PWM_X_CTL_GENBUPD_GS 0x00000300 // Globally Synchronized +#define PWM_X_CTL_GENAUPD_M 0x000000C0 // PWMnGENA Update Mode +#define PWM_X_CTL_GENAUPD_I 0x00000000 // Immediate +#define PWM_X_CTL_GENAUPD_LS 0x00000080 // Locally Synchronized +#define PWM_X_CTL_GENAUPD_GS 0x000000C0 // Globally Synchronized +#define PWM_X_CTL_CMPBUPD 0x00000020 // Comparator B Update Mode +#define PWM_X_CTL_CMPAUPD 0x00000010 // Comparator A Update Mode +#define PWM_X_CTL_LOADUPD 0x00000008 // Load Register Update Mode +#define PWM_X_CTL_DEBUG 0x00000004 // Debug Mode +#define PWM_X_CTL_MODE 0x00000002 // Counter Mode +#define PWM_X_CTL_ENABLE 0x00000001 // PWM Block Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_INTEN register. +// +//***************************************************************************** +#define PWM_X_INTEN_TRCMPBD 0x00002000 // Trigger for Counter=PWMnCMPB + // Down +#define PWM_X_INTEN_TRCMPBU 0x00001000 // Trigger for Counter=PWMnCMPB Up +#define PWM_X_INTEN_TRCMPAD 0x00000800 // Trigger for Counter=PWMnCMPA + // Down +#define PWM_X_INTEN_TRCMPAU 0x00000400 // Trigger for Counter=PWMnCMPA Up +#define PWM_X_INTEN_TRCNTLOAD 0x00000200 // Trigger for Counter=PWMnLOAD +#define PWM_X_INTEN_TRCNTZERO 0x00000100 // Trigger for Counter=0 +#define PWM_X_INTEN_INTCMPBD 0x00000020 // Interrupt for Counter=PWMnCMPB + // Down +#define PWM_X_INTEN_INTCMPBU 0x00000010 // Interrupt for Counter=PWMnCMPB + // Up +#define PWM_X_INTEN_INTCMPAD 0x00000008 // Interrupt for Counter=PWMnCMPA + // Down +#define PWM_X_INTEN_INTCMPAU 0x00000004 // Interrupt for Counter=PWMnCMPA + // Up +#define PWM_X_INTEN_INTCNTLOAD 0x00000002 // Interrupt for Counter=PWMnLOAD +#define PWM_X_INTEN_INTCNTZERO 0x00000001 // Interrupt for Counter=0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_RIS register. +// +//***************************************************************************** +#define PWM_X_RIS_INTCMPBD 0x00000020 // Comparator B Down Interrupt + // Status +#define PWM_X_RIS_INTCMPBU 0x00000010 // Comparator B Up Interrupt Status +#define PWM_X_RIS_INTCMPAD 0x00000008 // Comparator A Down Interrupt + // Status +#define PWM_X_RIS_INTCMPAU 0x00000004 // Comparator A Up Interrupt Status +#define PWM_X_RIS_INTCNTLOAD 0x00000002 // Counter=Load Interrupt Status +#define PWM_X_RIS_INTCNTZERO 0x00000001 // Counter=0 Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_ISC register. +// +//***************************************************************************** +#define PWM_X_ISC_INTCMPBD 0x00000020 // Comparator B Down Interrupt +#define PWM_X_ISC_INTCMPBU 0x00000010 // Comparator B Up Interrupt +#define PWM_X_ISC_INTCMPAD 0x00000008 // Comparator A Down Interrupt +#define PWM_X_ISC_INTCMPAU 0x00000004 // Comparator A Up Interrupt +#define PWM_X_ISC_INTCNTLOAD 0x00000002 // Counter=Load Interrupt +#define PWM_X_ISC_INTCNTZERO 0x00000001 // Counter=0 Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_LOAD register. +// +//***************************************************************************** +#define PWM_X_LOAD_M 0x0000FFFF // Counter Load Value +#define PWM_X_LOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_COUNT register. +// +//***************************************************************************** +#define PWM_X_COUNT_M 0x0000FFFF // Counter Value +#define PWM_X_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_CMPA register. +// +//***************************************************************************** +#define PWM_X_CMPA_M 0x0000FFFF // Comparator A Value +#define PWM_X_CMPA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_CMPB register. +// +//***************************************************************************** +#define PWM_X_CMPB_M 0x0000FFFF // Comparator B Value +#define PWM_X_CMPB_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_GENA register. +// +//***************************************************************************** +#define PWM_X_GENA_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down +#define PWM_X_GENA_ACTCMPBD_NONE \ + 0x00000000 // Do nothing +#define PWM_X_GENA_ACTCMPBD_INV 0x00000400 // Invert pwmA +#define PWM_X_GENA_ACTCMPBD_ZERO \ + 0x00000800 // Drive pwmA Low +#define PWM_X_GENA_ACTCMPBD_ONE 0x00000C00 // Drive pwmA High +#define PWM_X_GENA_ACTCMPBU_M 0x00000300 // Action for Comparator B Up +#define PWM_X_GENA_ACTCMPBU_NONE \ + 0x00000000 // Do nothing +#define PWM_X_GENA_ACTCMPBU_INV 0x00000100 // Invert pwmA +#define PWM_X_GENA_ACTCMPBU_ZERO \ + 0x00000200 // Drive pwmA Low +#define PWM_X_GENA_ACTCMPBU_ONE 0x00000300 // Drive pwmA High +#define PWM_X_GENA_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down +#define PWM_X_GENA_ACTCMPAD_NONE \ + 0x00000000 // Do nothing +#define PWM_X_GENA_ACTCMPAD_INV 0x00000040 // Invert pwmA +#define PWM_X_GENA_ACTCMPAD_ZERO \ + 0x00000080 // Drive pwmA Low +#define PWM_X_GENA_ACTCMPAD_ONE 0x000000C0 // Drive pwmA High +#define PWM_X_GENA_ACTCMPAU_M 0x00000030 // Action for Comparator A Up +#define PWM_X_GENA_ACTCMPAU_NONE \ + 0x00000000 // Do nothing +#define PWM_X_GENA_ACTCMPAU_INV 0x00000010 // Invert pwmA +#define PWM_X_GENA_ACTCMPAU_ZERO \ + 0x00000020 // Drive pwmA Low +#define PWM_X_GENA_ACTCMPAU_ONE 0x00000030 // Drive pwmA High +#define PWM_X_GENA_ACTLOAD_M 0x0000000C // Action for Counter=LOAD +#define PWM_X_GENA_ACTLOAD_NONE 0x00000000 // Do nothing +#define PWM_X_GENA_ACTLOAD_INV 0x00000004 // Invert pwmA +#define PWM_X_GENA_ACTLOAD_ZERO 0x00000008 // Drive pwmA Low +#define PWM_X_GENA_ACTLOAD_ONE 0x0000000C // Drive pwmA High +#define PWM_X_GENA_ACTZERO_M 0x00000003 // Action for Counter=0 +#define PWM_X_GENA_ACTZERO_NONE 0x00000000 // Do nothing +#define PWM_X_GENA_ACTZERO_INV 0x00000001 // Invert pwmA +#define PWM_X_GENA_ACTZERO_ZERO 0x00000002 // Drive pwmA Low +#define PWM_X_GENA_ACTZERO_ONE 0x00000003 // Drive pwmA High + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_GENB register. +// +//***************************************************************************** +#define PWM_X_GENB_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down +#define PWM_X_GENB_ACTCMPBD_NONE \ + 0x00000000 // Do nothing +#define PWM_X_GENB_ACTCMPBD_INV 0x00000400 // Invert pwmB +#define PWM_X_GENB_ACTCMPBD_ZERO \ + 0x00000800 // Drive pwmB Low +#define PWM_X_GENB_ACTCMPBD_ONE 0x00000C00 // Drive pwmB High +#define PWM_X_GENB_ACTCMPBU_M 0x00000300 // Action for Comparator B Up +#define PWM_X_GENB_ACTCMPBU_NONE \ + 0x00000000 // Do nothing +#define PWM_X_GENB_ACTCMPBU_INV 0x00000100 // Invert pwmB +#define PWM_X_GENB_ACTCMPBU_ZERO \ + 0x00000200 // Drive pwmB Low +#define PWM_X_GENB_ACTCMPBU_ONE 0x00000300 // Drive pwmB High +#define PWM_X_GENB_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down +#define PWM_X_GENB_ACTCMPAD_NONE \ + 0x00000000 // Do nothing +#define PWM_X_GENB_ACTCMPAD_INV 0x00000040 // Invert pwmB +#define PWM_X_GENB_ACTCMPAD_ZERO \ + 0x00000080 // Drive pwmB Low +#define PWM_X_GENB_ACTCMPAD_ONE 0x000000C0 // Drive pwmB High +#define PWM_X_GENB_ACTCMPAU_M 0x00000030 // Action for Comparator A Up +#define PWM_X_GENB_ACTCMPAU_NONE \ + 0x00000000 // Do nothing +#define PWM_X_GENB_ACTCMPAU_INV 0x00000010 // Invert pwmB +#define PWM_X_GENB_ACTCMPAU_ZERO \ + 0x00000020 // Drive pwmB Low +#define PWM_X_GENB_ACTCMPAU_ONE 0x00000030 // Drive pwmB High +#define PWM_X_GENB_ACTLOAD_M 0x0000000C // Action for Counter=LOAD +#define PWM_X_GENB_ACTLOAD_NONE 0x00000000 // Do nothing +#define PWM_X_GENB_ACTLOAD_INV 0x00000004 // Invert pwmB +#define PWM_X_GENB_ACTLOAD_ZERO 0x00000008 // Drive pwmB Low +#define PWM_X_GENB_ACTLOAD_ONE 0x0000000C // Drive pwmB High +#define PWM_X_GENB_ACTZERO_M 0x00000003 // Action for Counter=0 +#define PWM_X_GENB_ACTZERO_NONE 0x00000000 // Do nothing +#define PWM_X_GENB_ACTZERO_INV 0x00000001 // Invert pwmB +#define PWM_X_GENB_ACTZERO_ZERO 0x00000002 // Drive pwmB Low +#define PWM_X_GENB_ACTZERO_ONE 0x00000003 // Drive pwmB High + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_DBCTL register. +// +//***************************************************************************** +#define PWM_X_DBCTL_ENABLE 0x00000001 // Dead-Band Generator Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_DBRISE register. +// +//***************************************************************************** +#define PWM_X_DBRISE_DELAY_M 0x00000FFF // Dead-Band Rise Delay +#define PWM_X_DBRISE_DELAY_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_DBFALL register. +// +//***************************************************************************** +#define PWM_X_DBFALL_DELAY_M 0x00000FFF // Dead-Band Fall Delay +#define PWM_X_DBFALL_DELAY_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_FLTSRC0 +// register. +// +//***************************************************************************** +#define PWM_X_FLTSRC0_FAULT3 0x00000008 // Fault3 Input +#define PWM_X_FLTSRC0_FAULT2 0x00000004 // Fault2 Input +#define PWM_X_FLTSRC0_FAULT1 0x00000002 // Fault1 Input +#define PWM_X_FLTSRC0_FAULT0 0x00000001 // Fault0 Input + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_FLTSRC1 +// register. +// +//***************************************************************************** +#define PWM_X_FLTSRC1_DCMP7 0x00000080 // Digital Comparator 7 +#define PWM_X_FLTSRC1_DCMP6 0x00000040 // Digital Comparator 6 +#define PWM_X_FLTSRC1_DCMP5 0x00000020 // Digital Comparator 5 +#define PWM_X_FLTSRC1_DCMP4 0x00000010 // Digital Comparator 4 +#define PWM_X_FLTSRC1_DCMP3 0x00000008 // Digital Comparator 3 +#define PWM_X_FLTSRC1_DCMP2 0x00000004 // Digital Comparator 2 +#define PWM_X_FLTSRC1_DCMP1 0x00000002 // Digital Comparator 1 +#define PWM_X_FLTSRC1_DCMP0 0x00000001 // Digital Comparator 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_MINFLTPER +// register. +// +//***************************************************************************** +#define PWM_X_MINFLTPER_M 0x0000FFFF // Minimum Fault Period +#define PWM_X_MINFLTPER_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_FLTSEN register. +// +//***************************************************************************** +#define PWM_X_FLTSEN_FAULT3 0x00000008 // Fault3 Sense +#define PWM_X_FLTSEN_FAULT2 0x00000004 // Fault2 Sense +#define PWM_X_FLTSEN_FAULT1 0x00000002 // Fault1 Sense +#define PWM_X_FLTSEN_FAULT0 0x00000001 // Fault0 Sense + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_FLTSTAT0 +// register. +// +//***************************************************************************** +#define PWM_X_FLTSTAT0_FAULT3 0x00000008 // Fault Input 3 +#define PWM_X_FLTSTAT0_FAULT2 0x00000004 // Fault Input 2 +#define PWM_X_FLTSTAT0_FAULT1 0x00000002 // Fault Input 1 +#define PWM_X_FLTSTAT0_FAULT0 0x00000001 // Fault Input 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_FLTSTAT1 +// register. +// +//***************************************************************************** +#define PWM_X_FLTSTAT1_DCMP7 0x00000080 // Digital Comparator 7 Trigger +#define PWM_X_FLTSTAT1_DCMP6 0x00000040 // Digital Comparator 6 Trigger +#define PWM_X_FLTSTAT1_DCMP5 0x00000020 // Digital Comparator 5 Trigger +#define PWM_X_FLTSTAT1_DCMP4 0x00000010 // Digital Comparator 4 Trigger +#define PWM_X_FLTSTAT1_DCMP3 0x00000008 // Digital Comparator 3 Trigger +#define PWM_X_FLTSTAT1_DCMP2 0x00000004 // Digital Comparator 2 Trigger +#define PWM_X_FLTSTAT1_DCMP1 0x00000002 // Digital Comparator 1 Trigger +#define PWM_X_FLTSTAT1_DCMP0 0x00000001 // Digital Comparator 0 Trigger + +//***************************************************************************** +// +// The following are defines for the PWM Generator standard offsets. +// +//***************************************************************************** +#define PWM_O_X_CTL 0x00000000 // Gen Control Reg +#define PWM_O_X_INTEN 0x00000004 // Gen Int/Trig Enable Reg +#define PWM_O_X_RIS 0x00000008 // Gen Raw Int Status Reg +#define PWM_O_X_ISC 0x0000000C // Gen Int Status Reg +#define PWM_O_X_LOAD 0x00000010 // Gen Load Reg +#define PWM_O_X_COUNT 0x00000014 // Gen Counter Reg +#define PWM_O_X_CMPA 0x00000018 // Gen Compare A Reg +#define PWM_O_X_CMPB 0x0000001C // Gen Compare B Reg +#define PWM_O_X_GENA 0x00000020 // Gen Generator A Ctrl Reg +#define PWM_O_X_GENB 0x00000024 // Gen Generator B Ctrl Reg +#define PWM_O_X_DBCTL 0x00000028 // Gen Dead Band Ctrl Reg +#define PWM_O_X_DBRISE 0x0000002C // Gen DB Rising Edge Delay Reg +#define PWM_O_X_DBFALL 0x00000030 // Gen DB Falling Edge Delay Reg +#define PWM_O_X_FLTSRC0 0x00000034 // Fault pin, comparator condition +#define PWM_O_X_FLTSRC1 0x00000038 // Digital comparator condition +#define PWM_O_X_MINFLTPER 0x0000003C // Fault minimum period extension +#define PWM_GEN_0_OFFSET 0x00000040 // PWM0 base +#define PWM_GEN_1_OFFSET 0x00000080 // PWM1 base +#define PWM_GEN_2_OFFSET 0x000000C0 // PWM2 base +#define PWM_GEN_3_OFFSET 0x00000100 // PWM3 base + +//***************************************************************************** +// +// The following are defines for the PWM Generator extended offsets. +// +//***************************************************************************** +#define PWM_O_X_FLTSEN 0x00000000 // Fault logic sense +#define PWM_O_X_FLTSTAT0 0x00000004 // Pin and comparator status +#define PWM_O_X_FLTSTAT1 0x00000008 // Digital comparator status +#define PWM_EXT_0_OFFSET 0x00000800 // PWM0 extended base +#define PWM_EXT_1_OFFSET 0x00000880 // PWM1 extended base +#define PWM_EXT_2_OFFSET 0x00000900 // PWM2 extended base +#define PWM_EXT_3_OFFSET 0x00000980 // PWM3 extended base + +//***************************************************************************** +// +// The following definitions are deprecated. +// +//***************************************************************************** +#ifndef DEPRECATED + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the PWM_O_CTL +// register. +// +//***************************************************************************** +#define PWM_CTL_GLOBAL_SYNC2 0x00000004 // Global sync generator 2 +#define PWM_CTL_GLOBAL_SYNC1 0x00000002 // Global sync generator 1 +#define PWM_CTL_GLOBAL_SYNC0 0x00000001 // Global sync generator 0 + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the PWM_O_STATUS +// register. +// +//***************************************************************************** +#define PWM_STATUS_FAULT 0x00000001 // Fault Interrupt Status + +//***************************************************************************** +// +// The following are deprecated defines for the PWM Interrupt Register bit +// definitions. +// +//***************************************************************************** +#define PWM_INT_INTFAULT 0x00010000 // Fault interrupt pending + +//***************************************************************************** +// +// The following are deprecated defines for the PWM_X Interrupt Status Register +// bit definitions. +// +//***************************************************************************** +#define PWM_X_INT_INTCMPBD 0x00000020 // PWM_X_COUNT = PWM_X_CMPB D rcvd +#define PWM_X_INT_INTCMPBU 0x00000010 // PWM_X_COUNT = PWM_X_CMPB U rcvd +#define PWM_X_INT_INTCMPAD 0x00000008 // PWM_X_COUNT = PWM_X_CMPA D rcvd +#define PWM_X_INT_INTCMPAU 0x00000004 // PWM_X_COUNT = PWM_X_CMPA U rcvd +#define PWM_X_INT_INTCNTLOAD 0x00000002 // PWM_X_COUNT = PWM_X_LOAD rcvd +#define PWM_X_INT_INTCNTZERO 0x00000001 // PWM_X_COUNT = 0 received + +//***************************************************************************** +// +// The following are deprecated defines for the PWM_X Generator A/B Control +// Register bit definitions. +// +//***************************************************************************** +#define PWM_X_GEN_Y_ACTCMPBD 0x00000C00 // Act PWM_X_COUNT = PWM_X_CMPB D +#define PWM_X_GEN_Y_ACTCMPBU 0x00000300 // Act PWM_X_COUNT = PWM_X_CMPB U +#define PWM_X_GEN_Y_ACTCMPAD 0x000000C0 // Act PWM_X_COUNT = PWM_X_CMPA D +#define PWM_X_GEN_Y_ACTCMPAU 0x00000030 // Act PWM_X_COUNT = PWM_X_CMPA U +#define PWM_X_GEN_Y_ACTLOAD 0x0000000C // Act PWM_X_COUNT = PWM_X_LOAD +#define PWM_X_GEN_Y_ACTZERO 0x00000003 // Act PWM_X_COUNT = 0 + +//***************************************************************************** +// +// The following are deprecated defines for the PWM_X Generator A/B Control +// Register action definitions. +// +//***************************************************************************** +#define PWM_GEN_ACT_ONE 0x00000003 // Set the output signal to one +#define PWM_GEN_ACT_ZERO 0x00000002 // Set the output signal to zero +#define PWM_GEN_ACT_INV 0x00000001 // Invert the output signal +#define PWM_GEN_ACT_NONE 0x00000000 // Do nothing +#define PWM_GEN_ACT_B_DN_SHIFT 10 // Shift amount for the B dn action +#define PWM_GEN_ACT_B_UP_SHIFT 8 // Shift amount for the B up action +#define PWM_GEN_ACT_A_DN_SHIFT 6 // Shift amount for the A dn action +#define PWM_GEN_ACT_A_UP_SHIFT 4 // Shift amount for the A up action +#define PWM_GEN_ACT_LOAD_SHIFT 2 // Shift amount for the load action +#define PWM_GEN_ACT_ZERO_SHIFT 0 // Shift amount for the zero action + +//***************************************************************************** +// +// The following are deprecated defines for the PWM_X Dead Band Control +// Register bit definitions. +// +//***************************************************************************** +#define PWM_DBCTL_ENABLE 0x00000001 // Enable dead band insertion + +//***************************************************************************** +// +// The following are deprecated defines for the PWM Register reset values. +// +//***************************************************************************** +#define PWM_RV_X_DBCTL 0x00000000 // Control the dead band generator +#define PWM_RV_STATUS 0x00000000 // Status +#define PWM_RV_X_ISC 0x00000000 // Interrupt status and clearing +#define PWM_RV_X_RIS 0x00000000 // Raw interrupt status +#define PWM_RV_X_CTL 0x00000000 // Master control of the PWM + // generator block +#define PWM_RV_SYNC 0x00000000 // Counter synch for PWM generators +#define PWM_RV_X_DBFALL 0x00000000 // The dead band falling edge delay + // count +#define PWM_RV_X_INTEN 0x00000000 // Interrupt and trigger enable +#define PWM_RV_X_LOAD 0x00000000 // The load value for the counter +#define PWM_RV_X_GENA 0x00000000 // Controls PWM generator A +#define PWM_RV_CTL 0x00000000 // Master control of the PWM module +#define PWM_RV_FAULT 0x00000000 // Fault handling for the PWM + // output pins +#define PWM_RV_RIS 0x00000000 // Raw interrupt status +#define PWM_RV_X_CMPA 0x00000000 // The comparator A value +#define PWM_RV_INVERT 0x00000000 // Inversion control for PWM output + // pins +#define PWM_RV_X_DBRISE 0x00000000 // The dead band rising edge delay + // count +#define PWM_RV_ENABLE 0x00000000 // Master enable for the PWM output + // pins +#define PWM_RV_X_GENB 0x00000000 // Controls PWM generator B +#define PWM_RV_X_CMPB 0x00000000 // The comparator B value +#define PWM_RV_ISC 0x00000000 // Interrupt status and clearing +#define PWM_RV_INTEN 0x00000000 // Interrupt enable +#define PWM_RV_X_COUNT 0x00000000 // The current counter value + +#endif + +#endif // __HW_PWM_H__ diff --git a/bsp/lm3s_9b9x/Libraries/inc/hw_qei.h b/bsp/lm3s_9b9x/Libraries/inc/hw_qei.h new file mode 100644 index 0000000000000000000000000000000000000000..22a4811fd5b0832966cdb05888f7f981e5f50219 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/inc/hw_qei.h @@ -0,0 +1,201 @@ +//***************************************************************************** +// +// hw_qei.h - Macros used when accessing the QEI hardware. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_QEI_H__ +#define __HW_QEI_H__ + +//***************************************************************************** +// +// The following are defines for the QEI register offsets. +// +//***************************************************************************** +#define QEI_O_CTL 0x00000000 // QEI Control +#define QEI_O_STAT 0x00000004 // QEI Status +#define QEI_O_POS 0x00000008 // QEI Position +#define QEI_O_MAXPOS 0x0000000C // QEI Maximum Position +#define QEI_O_LOAD 0x00000010 // QEI Timer Load +#define QEI_O_TIME 0x00000014 // QEI Timer +#define QEI_O_COUNT 0x00000018 // QEI Velocity Counter +#define QEI_O_SPEED 0x0000001C // QEI Velocity +#define QEI_O_INTEN 0x00000020 // QEI Interrupt Enable +#define QEI_O_RIS 0x00000024 // QEI Raw Interrupt Status +#define QEI_O_ISC 0x00000028 // QEI Interrupt Status and Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_CTL register. +// +//***************************************************************************** +#define QEI_CTL_FILTCNT_M 0x000F0000 // Input Filter Prescale Count +#define QEI_CTL_FILTEN 0x00002000 // Enable Input Filter +#define QEI_CTL_STALLEN 0x00001000 // Stall QEI +#define QEI_CTL_INVI 0x00000800 // Invert Index Pulse +#define QEI_CTL_INVB 0x00000400 // Invert PhB +#define QEI_CTL_INVA 0x00000200 // Invert PhA +#define QEI_CTL_VELDIV_M 0x000001C0 // Predivide Velocity +#define QEI_CTL_VELDIV_1 0x00000000 // QEI clock /1 +#define QEI_CTL_VELDIV_2 0x00000040 // QEI clock /2 +#define QEI_CTL_VELDIV_4 0x00000080 // QEI clock /4 +#define QEI_CTL_VELDIV_8 0x000000C0 // QEI clock /8 +#define QEI_CTL_VELDIV_16 0x00000100 // QEI clock /16 +#define QEI_CTL_VELDIV_32 0x00000140 // QEI clock /32 +#define QEI_CTL_VELDIV_64 0x00000180 // QEI clock /64 +#define QEI_CTL_VELDIV_128 0x000001C0 // QEI clock /128 +#define QEI_CTL_VELEN 0x00000020 // Capture Velocity +#define QEI_CTL_RESMODE 0x00000010 // Reset Mode +#define QEI_CTL_CAPMODE 0x00000008 // Capture Mode +#define QEI_CTL_SIGMODE 0x00000004 // Signal Mode +#define QEI_CTL_SWAP 0x00000002 // Swap Signals +#define QEI_CTL_ENABLE 0x00000001 // Enable QEI +#define QEI_CTL_FILTCNT_S 16 + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_STAT register. +// +//***************************************************************************** +#define QEI_STAT_DIRECTION 0x00000002 // Direction of Rotation +#define QEI_STAT_ERROR 0x00000001 // Error Detected + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_POS register. +// +//***************************************************************************** +#define QEI_POS_M 0xFFFFFFFF // Current Position Integrator + // Value +#define QEI_POS_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_MAXPOS register. +// +//***************************************************************************** +#define QEI_MAXPOS_M 0xFFFFFFFF // Maximum Position Integrator + // Value +#define QEI_MAXPOS_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_LOAD register. +// +//***************************************************************************** +#define QEI_LOAD_M 0xFFFFFFFF // Velocity Timer Load Value +#define QEI_LOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_TIME register. +// +//***************************************************************************** +#define QEI_TIME_M 0xFFFFFFFF // Velocity Timer Current Value +#define QEI_TIME_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_COUNT register. +// +//***************************************************************************** +#define QEI_COUNT_M 0xFFFFFFFF // Velocity Pulse Count +#define QEI_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_SPEED register. +// +//***************************************************************************** +#define QEI_SPEED_M 0xFFFFFFFF // Velocity +#define QEI_SPEED_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_INTEN register. +// +//***************************************************************************** +#define QEI_INTEN_ERROR 0x00000008 // Phase Error Interrupt Enable +#define QEI_INTEN_DIR 0x00000004 // Direction Change Interrupt + // Enable +#define QEI_INTEN_TIMER 0x00000002 // Timer Expires Interrupt Enable +#define QEI_INTEN_INDEX 0x00000001 // Index Pulse Detected Interrupt + // Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_RIS register. +// +//***************************************************************************** +#define QEI_RIS_ERROR 0x00000008 // Phase Error Detected +#define QEI_RIS_DIR 0x00000004 // Direction Change Detected +#define QEI_RIS_TIMER 0x00000002 // Velocity Timer Expired +#define QEI_RIS_INDEX 0x00000001 // Index Pulse Asserted + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_ISC register. +// +//***************************************************************************** +#define QEI_ISC_ERROR 0x00000008 // Phase Error Interrupt +#define QEI_ISC_DIR 0x00000004 // Direction Change Interrupt +#define QEI_ISC_TIMER 0x00000002 // Velocity Timer Expired Interrupt +#define QEI_ISC_INDEX 0x00000001 // Index Pulse Interrupt + +//***************************************************************************** +// +// The following definitions are deprecated. +// +//***************************************************************************** +#ifndef DEPRECATED + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the QEI_ISC +// register. +// +//***************************************************************************** +#define QEI_INT_ERROR 0x00000008 // Phase error detected +#define QEI_INT_DIR 0x00000004 // Direction change +#define QEI_INT_TIMER 0x00000002 // Velocity timer expired +#define QEI_INT_INDEX 0x00000001 // Index pulse detected + +//***************************************************************************** +// +// The following are deprecated defines for the reset values for the QEI +// registers. +// +//***************************************************************************** +#define QEI_RV_POS 0x00000000 // Current position register +#define QEI_RV_LOAD 0x00000000 // Velocity timer load register +#define QEI_RV_CTL 0x00000000 // Configuration and control reg +#define QEI_RV_RIS 0x00000000 // Raw interrupt status register +#define QEI_RV_ISC 0x00000000 // Interrupt status register +#define QEI_RV_SPEED 0x00000000 // Velocity speed register +#define QEI_RV_INTEN 0x00000000 // Interrupt enable register +#define QEI_RV_STAT 0x00000000 // Status register +#define QEI_RV_COUNT 0x00000000 // Velocity pulse count register +#define QEI_RV_MAXPOS 0x00000000 // Maximum position register +#define QEI_RV_TIME 0x00000000 // Velocity timer register + +#endif + +#endif // __HW_QEI_H__ diff --git a/bsp/lm3s_9b9x/Libraries/inc/hw_ssi.h b/bsp/lm3s_9b9x/Libraries/inc/hw_ssi.h new file mode 100644 index 0000000000000000000000000000000000000000..9a5bc99ae3df9788cb868dddc221755f6a8550e0 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/inc/hw_ssi.h @@ -0,0 +1,217 @@ +//***************************************************************************** +// +// hw_ssi.h - Macros used when accessing the SSI hardware. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_SSI_H__ +#define __HW_SSI_H__ + +//***************************************************************************** +// +// The following are defines for the SSI register offsets. +// +//***************************************************************************** +#define SSI_O_CR0 0x00000000 // SSI Control 0 +#define SSI_O_CR1 0x00000004 // SSI Control 1 +#define SSI_O_DR 0x00000008 // SSI Data +#define SSI_O_SR 0x0000000C // SSI Status +#define SSI_O_CPSR 0x00000010 // SSI Clock Prescale +#define SSI_O_IM 0x00000014 // SSI Interrupt Mask +#define SSI_O_RIS 0x00000018 // SSI Raw Interrupt Status +#define SSI_O_MIS 0x0000001C // SSI Masked Interrupt Status +#define SSI_O_ICR 0x00000020 // SSI Interrupt Clear +#define SSI_O_DMACTL 0x00000024 // SSI DMA Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_CR0 register. +// +//***************************************************************************** +#define SSI_CR0_SCR_M 0x0000FF00 // SSI Serial Clock Rate +#define SSI_CR0_SPH 0x00000080 // SSI Serial Clock Phase +#define SSI_CR0_SPO 0x00000040 // SSI Serial Clock Polarity +#define SSI_CR0_FRF_M 0x00000030 // SSI Frame Format Select +#define SSI_CR0_FRF_MOTO 0x00000000 // Freescale SPI Frame Format +#define SSI_CR0_FRF_TI 0x00000010 // Texas Instruments Synchronous + // Serial Frame Format +#define SSI_CR0_FRF_NMW 0x00000020 // MICROWIRE Frame Format +#define SSI_CR0_DSS_M 0x0000000F // SSI Data Size Select +#define SSI_CR0_DSS_4 0x00000003 // 4-bit data +#define SSI_CR0_DSS_5 0x00000004 // 5-bit data +#define SSI_CR0_DSS_6 0x00000005 // 6-bit data +#define SSI_CR0_DSS_7 0x00000006 // 7-bit data +#define SSI_CR0_DSS_8 0x00000007 // 8-bit data +#define SSI_CR0_DSS_9 0x00000008 // 9-bit data +#define SSI_CR0_DSS_10 0x00000009 // 10-bit data +#define SSI_CR0_DSS_11 0x0000000A // 11-bit data +#define SSI_CR0_DSS_12 0x0000000B // 12-bit data +#define SSI_CR0_DSS_13 0x0000000C // 13-bit data +#define SSI_CR0_DSS_14 0x0000000D // 14-bit data +#define SSI_CR0_DSS_15 0x0000000E // 15-bit data +#define SSI_CR0_DSS_16 0x0000000F // 16-bit data +#define SSI_CR0_SCR_S 8 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_CR1 register. +// +//***************************************************************************** +#define SSI_CR1_EOT 0x00000010 // End of Transmission +#define SSI_CR1_SOD 0x00000008 // SSI Slave Mode Output Disable +#define SSI_CR1_MS 0x00000004 // SSI Master/Slave Select +#define SSI_CR1_SSE 0x00000002 // SSI Synchronous Serial Port + // Enable +#define SSI_CR1_LBM 0x00000001 // SSI Loopback Mode + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_DR register. +// +//***************************************************************************** +#define SSI_DR_DATA_M 0x0000FFFF // SSI Receive/Transmit Data +#define SSI_DR_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_SR register. +// +//***************************************************************************** +#define SSI_SR_BSY 0x00000010 // SSI Busy Bit +#define SSI_SR_RFF 0x00000008 // SSI Receive FIFO Full +#define SSI_SR_RNE 0x00000004 // SSI Receive FIFO Not Empty +#define SSI_SR_TNF 0x00000002 // SSI Transmit FIFO Not Full +#define SSI_SR_TFE 0x00000001 // SSI Transmit FIFO Empty + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_CPSR register. +// +//***************************************************************************** +#define SSI_CPSR_CPSDVSR_M 0x000000FF // SSI Clock Prescale Divisor +#define SSI_CPSR_CPSDVSR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_IM register. +// +//***************************************************************************** +#define SSI_IM_TXIM 0x00000008 // SSI Transmit FIFO Interrupt Mask +#define SSI_IM_RXIM 0x00000004 // SSI Receive FIFO Interrupt Mask +#define SSI_IM_RTIM 0x00000002 // SSI Receive Time-Out Interrupt + // Mask +#define SSI_IM_RORIM 0x00000001 // SSI Receive Overrun Interrupt + // Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_RIS register. +// +//***************************************************************************** +#define SSI_RIS_TXRIS 0x00000008 // SSI Transmit FIFO Raw Interrupt + // Status +#define SSI_RIS_RXRIS 0x00000004 // SSI Receive FIFO Raw Interrupt + // Status +#define SSI_RIS_RTRIS 0x00000002 // SSI Receive Time-Out Raw + // Interrupt Status +#define SSI_RIS_RORRIS 0x00000001 // SSI Receive Overrun Raw + // Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_MIS register. +// +//***************************************************************************** +#define SSI_MIS_TXMIS 0x00000008 // SSI Transmit FIFO Masked + // Interrupt Status +#define SSI_MIS_RXMIS 0x00000004 // SSI Receive FIFO Masked + // Interrupt Status +#define SSI_MIS_RTMIS 0x00000002 // SSI Receive Time-Out Masked + // Interrupt Status +#define SSI_MIS_RORMIS 0x00000001 // SSI Receive Overrun Masked + // Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_ICR register. +// +//***************************************************************************** +#define SSI_ICR_RTIC 0x00000002 // SSI Receive Time-Out Interrupt + // Clear +#define SSI_ICR_RORIC 0x00000001 // SSI Receive Overrun Interrupt + // Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_DMACTL register. +// +//***************************************************************************** +#define SSI_DMACTL_TXDMAE 0x00000002 // Transmit DMA Enable +#define SSI_DMACTL_RXDMAE 0x00000001 // Receive DMA Enable + +//***************************************************************************** +// +// The following definitions are deprecated. +// +//***************************************************************************** +#ifndef DEPRECATED + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the SSI_O_CR0 +// register. +// +//***************************************************************************** +#define SSI_CR0_SCR 0x0000FF00 // Serial clock rate +#define SSI_CR0_FRF_MASK 0x00000030 // Frame format mask +#define SSI_CR0_DSS 0x0000000F // Data size select + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the SSI_O_CPSR +// register. +// +//***************************************************************************** +#define SSI_CPSR_CPSDVSR_MASK 0x000000FF // Clock prescale + +//***************************************************************************** +// +// The following are deprecated defines for the SSI controller's FIFO size. +// +//***************************************************************************** +#define TX_FIFO_SIZE (8) // Number of entries in the TX FIFO +#define RX_FIFO_SIZE (8) // Number of entries in the RX FIFO + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the interrupt +// mask set and clear, raw interrupt, masked interrupt, and interrupt clear +// registers. +// +//***************************************************************************** +#define SSI_INT_TXFF 0x00000008 // TX FIFO interrupt +#define SSI_INT_RXFF 0x00000004 // RX FIFO interrupt +#define SSI_INT_RXTO 0x00000002 // RX timeout interrupt +#define SSI_INT_RXOR 0x00000001 // RX overrun interrupt + +#endif + +#endif // __HW_SSI_H__ diff --git a/bsp/lm3s_9b9x/Libraries/inc/hw_sysctl.h b/bsp/lm3s_9b9x/Libraries/inc/hw_sysctl.h new file mode 100644 index 0000000000000000000000000000000000000000..ffc63e7a9fe3124387c41796dc711f4290568a0f --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/inc/hw_sysctl.h @@ -0,0 +1,1688 @@ +//***************************************************************************** +// +// hw_sysctl.h - Macros used when accessing the system control hardware. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_SYSCTL_H__ +#define __HW_SYSCTL_H__ + +//***************************************************************************** +// +// The following are defines for the System Control register addresses. +// +//***************************************************************************** +#define SYSCTL_DID0 0x400FE000 // Device Identification 0 +#define SYSCTL_DID1 0x400FE004 // Device Identification 1 +#define SYSCTL_DC0 0x400FE008 // Device Capabilities 0 +#define SYSCTL_DC1 0x400FE010 // Device Capabilities 1 +#define SYSCTL_DC2 0x400FE014 // Device Capabilities 2 +#define SYSCTL_DC3 0x400FE018 // Device Capabilities 3 +#define SYSCTL_DC4 0x400FE01C // Device Capabilities 4 +#define SYSCTL_DC5 0x400FE020 // Device Capabilities 5 +#define SYSCTL_DC6 0x400FE024 // Device Capabilities 6 +#define SYSCTL_DC7 0x400FE028 // Device Capabilities 7 +#define SYSCTL_DC8 0x400FE02C // Device Capabilities 8 ADC + // Channels +#define SYSCTL_PBORCTL 0x400FE030 // Brown-Out Reset Control +#define SYSCTL_LDOPCTL 0x400FE034 // LDO Power Control +#define SYSCTL_SRCR0 0x400FE040 // Software Reset Control 0 +#define SYSCTL_SRCR1 0x400FE044 // Software Reset Control 1 +#define SYSCTL_SRCR2 0x400FE048 // Software Reset Control 2 +#define SYSCTL_RIS 0x400FE050 // Raw Interrupt Status +#define SYSCTL_IMC 0x400FE054 // Interrupt Mask Control +#define SYSCTL_MISC 0x400FE058 // Masked Interrupt Status and + // Clear +#define SYSCTL_RESC 0x400FE05C // Reset Cause +#define SYSCTL_RCC 0x400FE060 // Run-Mode Clock Configuration +#define SYSCTL_PLLCFG 0x400FE064 // XTAL to PLL Translation +#define SYSCTL_GPIOHSCTL 0x400FE06C // GPIO High-Speed Control +#define SYSCTL_GPIOHBCTL 0x400FE06C // GPIO High-Performance Bus + // Control +#define SYSCTL_RCC2 0x400FE070 // Run-Mode Clock Configuration 2 +#define SYSCTL_MOSCCTL 0x400FE07C // Main Oscillator Control +#define SYSCTL_RCGC0 0x400FE100 // Run Mode Clock Gating Control + // Register 0 +#define SYSCTL_RCGC1 0x400FE104 // Run Mode Clock Gating Control + // Register 1 +#define SYSCTL_RCGC2 0x400FE108 // Run Mode Clock Gating Control + // Register 2 +#define SYSCTL_SCGC0 0x400FE110 // Sleep Mode Clock Gating Control + // Register 0 +#define SYSCTL_SCGC1 0x400FE114 // Sleep Mode Clock Gating Control + // Register 1 +#define SYSCTL_SCGC2 0x400FE118 // Sleep Mode Clock Gating Control + // Register 2 +#define SYSCTL_DCGC0 0x400FE120 // Deep Sleep Mode Clock Gating + // Control Register 0 +#define SYSCTL_DCGC1 0x400FE124 // Deep-Sleep Mode Clock Gating + // Control Register 1 +#define SYSCTL_DCGC2 0x400FE128 // Deep Sleep Mode Clock Gating + // Control Register 2 +#define SYSCTL_DSLPCLKCFG 0x400FE144 // Deep Sleep Clock Configuration +#define SYSCTL_CLKVCLR 0x400FE150 // Clock Verification Clear +#define SYSCTL_PIOSCCAL 0x400FE150 // Precision Internal Oscillator + // Calibration +#define SYSCTL_PIOSCSTAT 0x400FE154 // Precision Internal Oscillator + // Statistics +#define SYSCTL_LDOARST 0x400FE160 // Allow Unregulated LDO to Reset + // the Part +#define SYSCTL_I2SMCLKCFG 0x400FE170 // I2S MCLK Configuration +#define SYSCTL_DC9 0x400FE190 // Device Capabilities 9 ADC + // Digital Comparators +#define SYSCTL_NVMSTAT 0x400FE1A0 // Non-Volatile Memory Information + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DID0 register. +// +//***************************************************************************** +#define SYSCTL_DID0_VER_M 0x70000000 // DID0 Version +#define SYSCTL_DID0_VER_0 0x00000000 // Initial DID0 register format + // definition for Stellaris(R) + // Sandstorm-class devices +#define SYSCTL_DID0_VER_1 0x10000000 // Second version of the DID0 + // register format +#define SYSCTL_DID0_CLASS_M 0x00FF0000 // Device Class +#define SYSCTL_DID0_CLASS_SANDSTORM \ + 0x00000000 // Sandstorm-class Device +#define SYSCTL_DID0_CLASS_FURY 0x00010000 // Stellaris(R) Fury-class devices +#define SYSCTL_DID0_CLASS_DUSTDEVIL \ + 0x00030000 // Stellaris(R) DustDevil-class + // devices +#define SYSCTL_DID0_CLASS_TEMPEST \ + 0x00040000 // Stellaris(R) Tempest-class + // microcontrollers +#define SYSCTL_DID0_MAJ_M 0x0000FF00 // Major Revision +#define SYSCTL_DID0_MAJ_REVA 0x00000000 // Revision A (initial device) +#define SYSCTL_DID0_MAJ_REVB 0x00000100 // Revision B (first base layer + // revision) +#define SYSCTL_DID0_MAJ_REVC 0x00000200 // Revision C (second base layer + // revision) +#define SYSCTL_DID0_MIN_M 0x000000FF // Minor Revision +#define SYSCTL_DID0_MIN_0 0x00000000 // Initial device, or a major + // revision update +#define SYSCTL_DID0_MIN_1 0x00000001 // First metal layer change +#define SYSCTL_DID0_MIN_2 0x00000002 // Second metal layer change +#define SYSCTL_DID0_MIN_3 0x00000003 // Minor revision 3 +#define SYSCTL_DID0_MIN_4 0x00000004 // Minor revision 4 +#define SYSCTL_DID0_MIN_5 0x00000005 // Minor revision 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DID1 register. +// +//***************************************************************************** +#define SYSCTL_DID1_VER_M 0xF0000000 // DID1 Version +#define SYSCTL_DID1_VER_0 0x00000000 // Initial DID1 register format + // definition, indicating a + // Stellaris LM3Snnn device +#define SYSCTL_DID1_VER_1 0x10000000 // Second version of the DID1 + // register format +#define SYSCTL_DID1_FAM_M 0x0F000000 // Family +#define SYSCTL_DID1_FAM_STELLARIS \ + 0x00000000 // Stellaris family of + // microcontollers, that is, all + // devices with external part + // numbers starting with LM3S +#define SYSCTL_DID1_PRTNO_M 0x00FF0000 // Part Number +#define SYSCTL_DID1_PRTNO_101 0x00010000 // LM3S101 +#define SYSCTL_DID1_PRTNO_102 0x00020000 // LM3S102 +#define SYSCTL_DID1_PRTNO_300 0x00190000 // LM3S300 +#define SYSCTL_DID1_PRTNO_301 0x00110000 // LM3S301 +#define SYSCTL_DID1_PRTNO_308 0x001A0000 // LM3S308 +#define SYSCTL_DID1_PRTNO_310 0x00120000 // LM3S310 +#define SYSCTL_DID1_PRTNO_315 0x00130000 // LM3S315 +#define SYSCTL_DID1_PRTNO_316 0x00140000 // LM3S316 +#define SYSCTL_DID1_PRTNO_317 0x00170000 // LM3S317 +#define SYSCTL_DID1_PRTNO_328 0x00150000 // LM3S328 +#define SYSCTL_DID1_PRTNO_600 0x002A0000 // LM3S600 +#define SYSCTL_DID1_PRTNO_601 0x00210000 // LM3S601 +#define SYSCTL_DID1_PRTNO_608 0x002B0000 // LM3S608 +#define SYSCTL_DID1_PRTNO_610 0x00220000 // LM3S610 +#define SYSCTL_DID1_PRTNO_611 0x00230000 // LM3S611 +#define SYSCTL_DID1_PRTNO_612 0x00240000 // LM3S612 +#define SYSCTL_DID1_PRTNO_613 0x00250000 // LM3S613 +#define SYSCTL_DID1_PRTNO_615 0x00260000 // LM3S615 +#define SYSCTL_DID1_PRTNO_617 0x00280000 // LM3S617 +#define SYSCTL_DID1_PRTNO_618 0x00290000 // LM3S618 +#define SYSCTL_DID1_PRTNO_628 0x00270000 // LM3S628 +#define SYSCTL_DID1_PRTNO_800 0x00380000 // LM3S800 +#define SYSCTL_DID1_PRTNO_801 0x00310000 // LM3S801 +#define SYSCTL_DID1_PRTNO_808 0x00390000 // LM3S808 +#define SYSCTL_DID1_PRTNO_811 0x00320000 // LM3S811 +#define SYSCTL_DID1_PRTNO_812 0x00330000 // LM3S812 +#define SYSCTL_DID1_PRTNO_815 0x00340000 // LM3S815 +#define SYSCTL_DID1_PRTNO_817 0x00360000 // LM3S817 +#define SYSCTL_DID1_PRTNO_818 0x00370000 // LM3S818 +#define SYSCTL_DID1_PRTNO_828 0x00350000 // LM3S828 +#define SYSCTL_DID1_PRTNO_1110 0x00BF0000 // LM3S1110 +#define SYSCTL_DID1_PRTNO_1133 0x00C30000 // LM3S1133 +#define SYSCTL_DID1_PRTNO_1138 0x00C50000 // LM3S1138 +#define SYSCTL_DID1_PRTNO_1150 0x00C10000 // LM3S1150 +#define SYSCTL_DID1_PRTNO_1162 0x00C40000 // LM3S1162 +#define SYSCTL_DID1_PRTNO_1165 0x00C20000 // LM3S1165 +#define SYSCTL_DID1_PRTNO_1332 0x00C60000 // LM3S1332 +#define SYSCTL_DID1_PRTNO_1435 0x00BC0000 // LM3S1435 +#define SYSCTL_DID1_PRTNO_1439 0x00BA0000 // LM3S1439 +#define SYSCTL_DID1_PRTNO_1512 0x00BB0000 // LM3S1512 +#define SYSCTL_DID1_PRTNO_1538 0x00C70000 // LM3S1538 +#define SYSCTL_DID1_PRTNO_1601 0x00DB0000 // LM3S1601 +#define SYSCTL_DID1_PRTNO_1607 0x00060000 // LM3S1607 +#define SYSCTL_DID1_PRTNO_1608 0x00DA0000 // LM3S1608 +#define SYSCTL_DID1_PRTNO_1620 0x00C00000 // LM3S1620 +#define SYSCTL_DID1_PRTNO_1625 0x00030000 // LM3S1625 +#define SYSCTL_DID1_PRTNO_1626 0x00040000 // LM3S1626 +#define SYSCTL_DID1_PRTNO_1627 0x00050000 // LM3S1627 +#define SYSCTL_DID1_PRTNO_1635 0x00B30000 // LM3S1635 +#define SYSCTL_DID1_PRTNO_1637 0x00BD0000 // LM3S1637 +#define SYSCTL_DID1_PRTNO_1651 0x00B10000 // LM3S1651 +#define SYSCTL_DID1_PRTNO_1751 0x00B90000 // LM3S1751 +#define SYSCTL_DID1_PRTNO_1776 0x00100000 // LM3S1776 +#define SYSCTL_DID1_PRTNO_1811 0x00160000 // LM3S1811 +#define SYSCTL_DID1_PRTNO_1816 0x003D0000 // LM3S1816 +#define SYSCTL_DID1_PRTNO_1850 0x00B40000 // LM3S1850 +#define SYSCTL_DID1_PRTNO_1911 0x00DD0000 // LM3S1911 +#define SYSCTL_DID1_PRTNO_1918 0x00DC0000 // LM3S1918 +#define SYSCTL_DID1_PRTNO_1937 0x00B70000 // LM3S1937 +#define SYSCTL_DID1_PRTNO_1958 0x00BE0000 // LM3S1958 +#define SYSCTL_DID1_PRTNO_1960 0x00B50000 // LM3S1960 +#define SYSCTL_DID1_PRTNO_1968 0x00B80000 // LM3S1968 +#define SYSCTL_DID1_PRTNO_1J11 0x000F0000 // LM3S1J11 +#define SYSCTL_DID1_PRTNO_1J16 0x003C0000 // LM3S1J16 +#define SYSCTL_DID1_PRTNO_1N11 0x000E0000 // LM3S1N11 +#define SYSCTL_DID1_PRTNO_1N16 0x003B0000 // LM3S1N16 +#define SYSCTL_DID1_PRTNO_1P51 0x00B20000 // LM3S1P51 +#define SYSCTL_DID1_PRTNO_1R21 0x009E0000 // LM3S1R21 +#define SYSCTL_DID1_PRTNO_1W16 0x00300000 // LM3S1W16 +#define SYSCTL_DID1_PRTNO_1Z16 0x002F0000 // LM3S1Z16 +#define SYSCTL_DID1_PRTNO_2110 0x00510000 // LM3S2110 +#define SYSCTL_DID1_PRTNO_2139 0x00840000 // LM3S2139 +#define SYSCTL_DID1_PRTNO_2276 0x00390000 // LM3S2276 +#define SYSCTL_DID1_PRTNO_2410 0x00A20000 // LM3S2410 +#define SYSCTL_DID1_PRTNO_2412 0x00590000 // LM3S2412 +#define SYSCTL_DID1_PRTNO_2432 0x00560000 // LM3S2432 +#define SYSCTL_DID1_PRTNO_2533 0x005A0000 // LM3S2533 +#define SYSCTL_DID1_PRTNO_2601 0x00E10000 // LM3S2601 +#define SYSCTL_DID1_PRTNO_2608 0x00E00000 // LM3S2608 +#define SYSCTL_DID1_PRTNO_2616 0x00330000 // LM3S2616 +#define SYSCTL_DID1_PRTNO_2620 0x00570000 // LM3S2620 +#define SYSCTL_DID1_PRTNO_2637 0x00850000 // LM3S2637 +#define SYSCTL_DID1_PRTNO_2651 0x00530000 // LM3S2651 +#define SYSCTL_DID1_PRTNO_2671 0x00800000 // LM3S2671 +#define SYSCTL_DID1_PRTNO_2678 0x00500000 // LM3S2678 +#define SYSCTL_DID1_PRTNO_2730 0x00A40000 // LM3S2730 +#define SYSCTL_DID1_PRTNO_2739 0x00520000 // LM3S2739 +#define SYSCTL_DID1_PRTNO_2776 0x003A0000 // LM3S2776 +#define SYSCTL_DID1_PRTNO_2793 0x006D0000 // LM3S2793 +#define SYSCTL_DID1_PRTNO_2911 0x00E30000 // LM3S2911 +#define SYSCTL_DID1_PRTNO_2918 0x00E20000 // LM3S2918 +#define SYSCTL_DID1_PRTNO_2939 0x00540000 // LM3S2939 +#define SYSCTL_DID1_PRTNO_2948 0x008F0000 // LM3S2948 +#define SYSCTL_DID1_PRTNO_2950 0x00580000 // LM3S2950 +#define SYSCTL_DID1_PRTNO_2965 0x00550000 // LM3S2965 +#define SYSCTL_DID1_PRTNO_2B93 0x006C0000 // LM3S2B93 +#define SYSCTL_DID1_PRTNO_3634 0x00080000 // LM3S3634 +#define SYSCTL_DID1_PRTNO_3651 0x00430000 // LM3S3651 +#define SYSCTL_DID1_PRTNO_3739 0x00440000 // LM3S3739 +#define SYSCTL_DID1_PRTNO_3748 0x00490000 // LM3S3748 +#define SYSCTL_DID1_PRTNO_3749 0x00450000 // LM3S3749 +#define SYSCTL_DID1_PRTNO_3826 0x00420000 // LM3S3826 +#define SYSCTL_DID1_PRTNO_3J26 0x00410000 // LM3S3J26 +#define SYSCTL_DID1_PRTNO_3N26 0x00400000 // LM3S3N26 +#define SYSCTL_DID1_PRTNO_3W26 0x003F0000 // LM3S3W26 +#define SYSCTL_DID1_PRTNO_3Z26 0x003E0000 // LM3S3Z26 +#define SYSCTL_DID1_PRTNO_5632 0x00810000 // LM3S5632 +#define SYSCTL_DID1_PRTNO_5651 0x000C0000 // LM3S5651 +#define SYSCTL_DID1_PRTNO_5652 0x008A0000 // LM3S5652 +#define SYSCTL_DID1_PRTNO_5656 0x004D0000 // LM3S5656 +#define SYSCTL_DID1_PRTNO_5662 0x00910000 // LM3S5662 +#define SYSCTL_DID1_PRTNO_5732 0x00960000 // LM3S5732 +#define SYSCTL_DID1_PRTNO_5737 0x00970000 // LM3S5737 +#define SYSCTL_DID1_PRTNO_5739 0x00A00000 // LM3S5739 +#define SYSCTL_DID1_PRTNO_5747 0x00990000 // LM3S5747 +#define SYSCTL_DID1_PRTNO_5749 0x00A70000 // LM3S5749 +#define SYSCTL_DID1_PRTNO_5752 0x009A0000 // LM3S5752 +#define SYSCTL_DID1_PRTNO_5762 0x009C0000 // LM3S5762 +#define SYSCTL_DID1_PRTNO_5791 0x00690000 // LM3S5791 +#define SYSCTL_DID1_PRTNO_5951 0x000B0000 // LM3S5951 +#define SYSCTL_DID1_PRTNO_5956 0x004E0000 // LM3S5956 +#define SYSCTL_DID1_PRTNO_5B91 0x00680000 // LM3S5B91 +#define SYSCTL_DID1_PRTNO_5K31 0x00090000 // LM3S5K31 +#define SYSCTL_DID1_PRTNO_5K36 0x004A0000 // LM3S5K36 +#define SYSCTL_DID1_PRTNO_5P31 0x000A0000 // LM3S5P31 +#define SYSCTL_DID1_PRTNO_5P36 0x00480000 // LM3S5P36 +#define SYSCTL_DID1_PRTNO_5P51 0x000D0000 // LM3S5P51 +#define SYSCTL_DID1_PRTNO_5P56 0x004C0000 // LM3S5P56 +#define SYSCTL_DID1_PRTNO_5R31 0x00070000 // LM3S5R31 +#define SYSCTL_DID1_PRTNO_5R36 0x004B0000 // LM3S5R36 +#define SYSCTL_DID1_PRTNO_5T36 0x00470000 // LM3S5T36 +#define SYSCTL_DID1_PRTNO_5Y36 0x00460000 // LM3S5Y36 +#define SYSCTL_DID1_PRTNO_6100 0x00A10000 // LM3S6100 +#define SYSCTL_DID1_PRTNO_6110 0x00740000 // LM3S6110 +#define SYSCTL_DID1_PRTNO_6420 0x00A50000 // LM3S6420 +#define SYSCTL_DID1_PRTNO_6422 0x00820000 // LM3S6422 +#define SYSCTL_DID1_PRTNO_6432 0x00750000 // LM3S6432 +#define SYSCTL_DID1_PRTNO_6537 0x00760000 // LM3S6537 +#define SYSCTL_DID1_PRTNO_6610 0x00710000 // LM3S6610 +#define SYSCTL_DID1_PRTNO_6611 0x00E70000 // LM3S6611 +#define SYSCTL_DID1_PRTNO_6618 0x00E60000 // LM3S6618 +#define SYSCTL_DID1_PRTNO_6633 0x00830000 // LM3S6633 +#define SYSCTL_DID1_PRTNO_6637 0x008B0000 // LM3S6637 +#define SYSCTL_DID1_PRTNO_6730 0x00A30000 // LM3S6730 +#define SYSCTL_DID1_PRTNO_6753 0x00770000 // LM3S6753 +#define SYSCTL_DID1_PRTNO_6911 0x00E90000 // LM3S6911 +#define SYSCTL_DID1_PRTNO_6918 0x00E80000 // LM3S6918 +#define SYSCTL_DID1_PRTNO_6938 0x00890000 // LM3S6938 +#define SYSCTL_DID1_PRTNO_6950 0x00720000 // LM3S6950 +#define SYSCTL_DID1_PRTNO_6952 0x00780000 // LM3S6952 +#define SYSCTL_DID1_PRTNO_6965 0x00730000 // LM3S6965 +#define SYSCTL_DID1_PRTNO_8530 0x00640000 // LM3S8530 +#define SYSCTL_DID1_PRTNO_8538 0x008E0000 // LM3S8538 +#define SYSCTL_DID1_PRTNO_8630 0x00610000 // LM3S8630 +#define SYSCTL_DID1_PRTNO_8730 0x00630000 // LM3S8730 +#define SYSCTL_DID1_PRTNO_8733 0x008D0000 // LM3S8733 +#define SYSCTL_DID1_PRTNO_8738 0x00860000 // LM3S8738 +#define SYSCTL_DID1_PRTNO_8930 0x00650000 // LM3S8930 +#define SYSCTL_DID1_PRTNO_8933 0x008C0000 // LM3S8933 +#define SYSCTL_DID1_PRTNO_8938 0x00880000 // LM3S8938 +#define SYSCTL_DID1_PRTNO_8962 0x00A60000 // LM3S8962 +#define SYSCTL_DID1_PRTNO_8970 0x00620000 // LM3S8970 +#define SYSCTL_DID1_PRTNO_8971 0x00D70000 // LM3S8971 +#define SYSCTL_DID1_PRTNO_9790 0x00670000 // LM3S9790 +#define SYSCTL_DID1_PRTNO_9792 0x006B0000 // LM3S9792 +#define SYSCTL_DID1_PRTNO_9997 0x00200000 // LM3S9997 +#define SYSCTL_DID1_PRTNO_9B90 0x00660000 // LM3S9B90 +#define SYSCTL_DID1_PRTNO_9B92 0x006A0000 // LM3S9B92 +#define SYSCTL_DID1_PRTNO_9B95 0x006E0000 // LM3S9B95 +#define SYSCTL_DID1_PRTNO_9B96 0x006F0000 // LM3S9B96 +#define SYSCTL_DID1_PRTNO_9L97 0x00180000 // LM3S9L97 +#define SYSCTL_DID1_PINCNT_M 0x0000E000 // Package Pin Count +#define SYSCTL_DID1_PINCNT_28 0x00000000 // 28 pin package +#define SYSCTL_DID1_PINCNT_48 0x00002000 // 48 pin package +#define SYSCTL_DID1_PINCNT_100 0x00004000 // 100-pin package +#define SYSCTL_DID1_PINCNT_64 0x00006000 // 64-pin package +#define SYSCTL_DID1_TEMP_M 0x000000E0 // Temperature Range +#define SYSCTL_DID1_TEMP_C 0x00000000 // Commercial temperature range (0C + // to 70C) +#define SYSCTL_DID1_TEMP_I 0x00000020 // Industrial temperature range + // (-40C to 85C) +#define SYSCTL_DID1_TEMP_E 0x00000040 // Extended temperature range (-40C + // to 105C) +#define SYSCTL_DID1_PKG_M 0x00000018 // Package Type +#define SYSCTL_DID1_PKG_SOIC 0x00000000 // SOIC package +#define SYSCTL_DID1_PKG_QFP 0x00000008 // LQFP package +#define SYSCTL_DID1_PKG_BGA 0x00000010 // BGA package +#define SYSCTL_DID1_PKG_QFN 0x00000018 // QFN package +#define SYSCTL_DID1_ROHS 0x00000004 // RoHS-Compliance +#define SYSCTL_DID1_QUAL_M 0x00000003 // Qualification Status +#define SYSCTL_DID1_QUAL_ES 0x00000000 // Engineering Sample (unqualified) +#define SYSCTL_DID1_QUAL_PP 0x00000001 // Pilot Production (unqualified) +#define SYSCTL_DID1_QUAL_FQ 0x00000002 // Fully Qualified +#define SYSCTL_DID1_PRTNO_S 16 // Part number shift + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DC0 register. +// +//***************************************************************************** +#define SYSCTL_DC0_SRAMSZ_M 0xFFFF0000 // SRAM Size +#define SYSCTL_DC0_SRAMSZ_2KB 0x00070000 // 2 KB of SRAM +#define SYSCTL_DC0_SRAMSZ_4KB 0x000F0000 // 4 KB of SRAM +#define SYSCTL_DC0_SRAMSZ_6KB 0x00170000 // 6 KB of SRAM +#define SYSCTL_DC0_SRAMSZ_8KB 0x001F0000 // 8 KB of SRAM +#define SYSCTL_DC0_SRAMSZ_12KB 0x002F0000 // 12 KB of SRAM +#define SYSCTL_DC0_SRAMSZ_16KB 0x003F0000 // 16 KB of SRAM +#define SYSCTL_DC0_SRAMSZ_20KB 0x004F0000 // 20 KB of SRAM +#define SYSCTL_DC0_SRAMSZ_24KB 0x005F0000 // 24 KB of SRAM +#define SYSCTL_DC0_SRAMSZ_32KB 0x007F0000 // 32 KB of SRAM +#define SYSCTL_DC0_SRAMSZ_48KB 0x00BF0000 // 48 KB of SRAM +#define SYSCTL_DC0_SRAMSZ_64KB 0x00FF0000 // 64 KB of SRAM +#define SYSCTL_DC0_SRAMSZ_96KB 0x017F0000 // 96 KB of SRAM +#define SYSCTL_DC0_FLASHSZ_M 0x0000FFFF // Flash Size +#define SYSCTL_DC0_FLASHSZ_8KB 0x00000003 // 8 KB of Flash +#define SYSCTL_DC0_FLASHSZ_16KB 0x00000007 // 16 KB of Flash +#define SYSCTL_DC0_FLASHSZ_32KB 0x0000000F // 32 KB of Flash +#define SYSCTL_DC0_FLASHSZ_64KB 0x0000001F // 64 KB of Flash +#define SYSCTL_DC0_FLASHSZ_96KB 0x0000002F // 96 KB of Flash +#define SYSCTL_DC0_FLASHSZ_128K 0x0000003F // 128 KB of Flash +#define SYSCTL_DC0_FLASHSZ_256K 0x0000007F // 256 KB of Flash +#define SYSCTL_DC0_SRAMSZ_S 16 // SRAM size shift +#define SYSCTL_DC0_FLASHSZ_S 0 // Flash size shift + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DC1 register. +// +//***************************************************************************** +#define SYSCTL_DC1_WDT1 0x10000000 // Watchdog Timer1 Present +#define SYSCTL_DC1_CAN2 0x04000000 // CAN Module 2 Present +#define SYSCTL_DC1_CAN1 0x02000000 // CAN Module 1 Present +#define SYSCTL_DC1_CAN0 0x01000000 // CAN Module 0 Present +#define SYSCTL_DC1_PWM 0x00100000 // PWM Module Present +#define SYSCTL_DC1_ADC1 0x00020000 // ADC Module 1 Present +#define SYSCTL_DC1_ADC0 0x00010000 // ADC Module 0 Present +#define SYSCTL_DC1_MINSYSDIV_M 0x0000F000 // System Clock Divider +#define SYSCTL_DC1_MINSYSDIV_100 \ + 0x00001000 // Divide VCO (400MHZ) by 5 minimum +#define SYSCTL_DC1_MINSYSDIV_66 0x00002000 // Divide VCO (400MHZ) by 2*2 + 2 = + // 6 minimum +#define SYSCTL_DC1_MINSYSDIV_50 0x00003000 // Specifies a 50-MHz CPU clock + // with a PLL divider of 4 +#define SYSCTL_DC1_MINSYSDIV_25 0x00007000 // Specifies a 25-MHz clock with a + // PLL divider of 8 +#define SYSCTL_DC1_MINSYSDIV_20 0x00009000 // Specifies a 20-MHz clock with a + // PLL divider of 10 +#define SYSCTL_DC1_ADCSPD_M 0x00000F00 // Max ADC Speed +#define SYSCTL_DC1_ADCSPD_125K 0x00000000 // 125Ksps ADC +#define SYSCTL_DC1_ADCSPD_250K 0x00000100 // 250K samples/second +#define SYSCTL_DC1_ADCSPD_500K 0x00000200 // 500K samples/second +#define SYSCTL_DC1_ADCSPD_1M 0x00000300 // 1M samples/second +#define SYSCTL_DC1_ADC1SPD_M 0x00000C00 // Max ADC1 Speed +#define SYSCTL_DC1_ADC1SPD_1M 0x00000C00 // 1M samples/second +#define SYSCTL_DC1_ADC0SPD_M 0x00000300 // Max ADC0 Speed +#define SYSCTL_DC1_ADC0SPD_1M 0x00000300 // 1M samples/second +#define SYSCTL_DC1_MPU 0x00000080 // MPU Present +#define SYSCTL_DC1_HIB 0x00000040 // Hibernation Module Present +#define SYSCTL_DC1_TEMP 0x00000020 // Temp Sensor Present +#define SYSCTL_DC1_PLL 0x00000010 // PLL Present +#define SYSCTL_DC1_WDT0 0x00000008 // Watchdog Timer 0 Present +#define SYSCTL_DC1_SWO 0x00000004 // SWO Trace Port Present +#define SYSCTL_DC1_SWD 0x00000002 // SWD Present +#define SYSCTL_DC1_JTAG 0x00000001 // JTAG Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DC2 register. +// +//***************************************************************************** +#define SYSCTL_DC2_EPI0 0x40000000 // EPI Module 0 Present +#define SYSCTL_DC2_I2S0 0x10000000 // I2S Module 0 Present +#define SYSCTL_DC2_COMP2 0x04000000 // Analog Comparator 2 Present +#define SYSCTL_DC2_COMP1 0x02000000 // Analog Comparator 1 Present +#define SYSCTL_DC2_COMP0 0x01000000 // Analog Comparator 0 Present +#define SYSCTL_DC2_TIMER3 0x00080000 // Timer Module 3 Present +#define SYSCTL_DC2_TIMER2 0x00040000 // Timer Module 2 Present +#define SYSCTL_DC2_TIMER1 0x00020000 // Timer Module 1 Present +#define SYSCTL_DC2_TIMER0 0x00010000 // Timer Module 0 Present +#define SYSCTL_DC2_I2C1 0x00004000 // I2C Module 1 Present +#define SYSCTL_DC2_I2C0 0x00001000 // I2C Module 0 Present +#define SYSCTL_DC2_QEI1 0x00000200 // QEI Module 1 Present +#define SYSCTL_DC2_QEI0 0x00000100 // QEI Module 0 Present +#define SYSCTL_DC2_SSI1 0x00000020 // SSI Module 1 Present +#define SYSCTL_DC2_SSI0 0x00000010 // SSI Module 0 Present +#define SYSCTL_DC2_UART2 0x00000004 // UART Module 2 Present +#define SYSCTL_DC2_UART1 0x00000002 // UART Module 1 Present +#define SYSCTL_DC2_UART0 0x00000001 // UART Module 0 Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DC3 register. +// +//***************************************************************************** +#define SYSCTL_DC3_32KHZ 0x80000000 // 32KHz Input Clock Available +#define SYSCTL_DC3_CCP5 0x20000000 // CCP5 Pin Present +#define SYSCTL_DC3_CCP4 0x10000000 // CCP4 Pin Present +#define SYSCTL_DC3_CCP3 0x08000000 // CCP3 Pin Present +#define SYSCTL_DC3_CCP2 0x04000000 // CCP2 Pin Present +#define SYSCTL_DC3_CCP1 0x02000000 // CCP1 Pin Present +#define SYSCTL_DC3_CCP0 0x01000000 // CCP0 Pin Present +#define SYSCTL_DC3_ADC0AIN7 0x00800000 // ADC Module 0 AIN7 Pin Present +#define SYSCTL_DC3_ADC0AIN6 0x00400000 // ADC Module 0 AIN6 Pin Present +#define SYSCTL_DC3_ADC0AIN5 0x00200000 // ADC Module 0 AIN5 Pin Present +#define SYSCTL_DC3_ADC0AIN4 0x00100000 // ADC Module 0 AIN4 Pin Present +#define SYSCTL_DC3_ADC0AIN3 0x00080000 // ADC Module 0 AIN3 Pin Present +#define SYSCTL_DC3_ADC0AIN2 0x00040000 // ADC Module 0 AIN2 Pin Present +#define SYSCTL_DC3_ADC0AIN1 0x00020000 // ADC Module 0 AIN1 Pin Present +#define SYSCTL_DC3_ADC0AIN0 0x00010000 // ADC Module 0 AIN0 Pin Present +#define SYSCTL_DC3_PWMFAULT 0x00008000 // PWM Fault Pin Present +#define SYSCTL_DC3_C2O 0x00004000 // C2o Pin Present +#define SYSCTL_DC3_C2PLUS 0x00002000 // C2+ Pin Present +#define SYSCTL_DC3_C2MINUS 0x00001000 // C2- Pin Present +#define SYSCTL_DC3_C1O 0x00000800 // C1o Pin Present +#define SYSCTL_DC3_C1PLUS 0x00000400 // C1+ Pin Present +#define SYSCTL_DC3_C1MINUS 0x00000200 // C1- Pin Present +#define SYSCTL_DC3_C0O 0x00000100 // C0o Pin Present +#define SYSCTL_DC3_C0PLUS 0x00000080 // C0+ Pin Present +#define SYSCTL_DC3_C0MINUS 0x00000040 // C0- Pin Present +#define SYSCTL_DC3_PWM5 0x00000020 // PWM5 Pin Present +#define SYSCTL_DC3_PWM4 0x00000010 // PWM4 Pin Present +#define SYSCTL_DC3_PWM3 0x00000008 // PWM3 Pin Present +#define SYSCTL_DC3_PWM2 0x00000004 // PWM2 Pin Present +#define SYSCTL_DC3_PWM1 0x00000002 // PWM1 Pin Present +#define SYSCTL_DC3_PWM0 0x00000001 // PWM0 Pin Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DC4 register. +// +//***************************************************************************** +#define SYSCTL_DC4_ETH 0x50000000 // Ethernet present +#define SYSCTL_DC4_EPHY0 0x40000000 // Ethernet PHY Layer 0 Present +#define SYSCTL_DC4_EMAC0 0x10000000 // Ethernet MAC Layer 0 Present +#define SYSCTL_DC4_E1588 0x01000000 // 1588 Capable +#define SYSCTL_DC4_PICAL 0x00040000 // PIOSC Calibrate +#define SYSCTL_DC4_CCP7 0x00008000 // CCP7 Pin Present +#define SYSCTL_DC4_CCP6 0x00004000 // CCP6 Pin Present +#define SYSCTL_DC4_UDMA 0x00002000 // Micro-DMA Module Present +#define SYSCTL_DC4_ROM 0x00001000 // Internal Code ROM Present +#define SYSCTL_DC4_GPIOJ 0x00000100 // GPIO Port J Present +#define SYSCTL_DC4_GPIOH 0x00000080 // GPIO Port H Present +#define SYSCTL_DC4_GPIOG 0x00000040 // GPIO Port G Present +#define SYSCTL_DC4_GPIOF 0x00000020 // GPIO Port F Present +#define SYSCTL_DC4_GPIOE 0x00000010 // GPIO Port E Present +#define SYSCTL_DC4_GPIOD 0x00000008 // GPIO Port D Present +#define SYSCTL_DC4_GPIOC 0x00000004 // GPIO Port C Present +#define SYSCTL_DC4_GPIOB 0x00000002 // GPIO Port B Present +#define SYSCTL_DC4_GPIOA 0x00000001 // GPIO Port A Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DC5 register. +// +//***************************************************************************** +#define SYSCTL_DC5_PWMFAULT3 0x08000000 // PWM Fault 3 Pin Present +#define SYSCTL_DC5_PWMFAULT2 0x04000000 // PWM Fault 2 Pin Present +#define SYSCTL_DC5_PWMFAULT1 0x02000000 // PWM Fault 1 Pin Present +#define SYSCTL_DC5_PWMFAULT0 0x01000000 // PWM Fault 0 Pin Present +#define SYSCTL_DC5_PWMEFLT 0x00200000 // PWM Extended Fault Active +#define SYSCTL_DC5_PWMESYNC 0x00100000 // PWM Extended SYNC Active +#define SYSCTL_DC5_PWM7 0x00000080 // PWM7 Pin Present +#define SYSCTL_DC5_PWM6 0x00000040 // PWM6 Pin Present +#define SYSCTL_DC5_PWM5 0x00000020 // PWM5 Pin Present +#define SYSCTL_DC5_PWM4 0x00000010 // PWM4 Pin Present +#define SYSCTL_DC5_PWM3 0x00000008 // PWM3 Pin Present +#define SYSCTL_DC5_PWM2 0x00000004 // PWM2 Pin Present +#define SYSCTL_DC5_PWM1 0x00000002 // PWM1 Pin Present +#define SYSCTL_DC5_PWM0 0x00000001 // PWM0 Pin Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DC6 register. +// +//***************************************************************************** +#define SYSCTL_DC6_USB0PHY 0x00000010 // USB Module 0 PHY Present +#define SYSCTL_DC6_USB0_M 0x00000003 // USB Module 0 Present +#define SYSCTL_DC6_USB0_DEV 0x00000001 // USB0 is Device Only +#define SYSCTL_DC6_USB0_HOSTDEV 0x00000002 // USB is Device or Host +#define SYSCTL_DC6_USB0_OTG 0x00000003 // USB0 is OTG + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DC7 register. +// +//***************************************************************************** +#define SYSCTL_DC7_SW 0x40000000 // Software transfer on uDMA Ch30 +#define SYSCTL_DC7_DMACH30 0x40000000 // SW +#define SYSCTL_DC7_DMACH29 0x20000000 // I2S0_TX / CAN1_TX +#define SYSCTL_DC7_DMACH28 0x10000000 // I2S0_RX / CAN1_RX +#define SYSCTL_DC7_DMACH27 0x08000000 // CAN1_TX / ADC1_SS3 +#define SYSCTL_DC7_DMACH26 0x04000000 // CAN1_RX / ADC1_SS2 +#define SYSCTL_DC7_DMACH25 0x02000000 // SSI1_TX / ADC1_SS1 +#define SYSCTL_DC7_SSI1_TX 0x02000000 // SSI1 TX on uDMA Ch25 +#define SYSCTL_DC7_SSI1_RX 0x01000000 // SSI1 RX on uDMA Ch24 +#define SYSCTL_DC7_DMACH24 0x01000000 // SSI1_RX / ADC1_SS0 +#define SYSCTL_DC7_UART1_TX 0x00800000 // UART1 TX on uDMA Ch23 +#define SYSCTL_DC7_DMACH23 0x00800000 // UART1_TX / CAN2_TX +#define SYSCTL_DC7_DMACH22 0x00400000 // UART1_RX / CAN2_RX +#define SYSCTL_DC7_UART1_RX 0x00400000 // UART1 RX on uDMA Ch22 +#define SYSCTL_DC7_DMACH21 0x00200000 // Timer1B / EPI0_WFIFO +#define SYSCTL_DC7_DMACH20 0x00100000 // Timer1A / EPI0_NBRFIFO +#define SYSCTL_DC7_DMACH19 0x00080000 // Timer0B / Timer1B +#define SYSCTL_DC7_DMACH18 0x00040000 // Timer0A / Timer1A +#define SYSCTL_DC7_DMACH17 0x00020000 // ADC0_SS3 +#define SYSCTL_DC7_DMACH16 0x00010000 // ADC0_SS2 +#define SYSCTL_DC7_DMACH15 0x00008000 // ADC0_SS1 / Timer2B +#define SYSCTL_DC7_DMACH14 0x00004000 // ADC0_SS0 / Timer2A +#define SYSCTL_DC7_DMACH13 0x00002000 // CAN0_TX / UART2_TX +#define SYSCTL_DC7_DMACH12 0x00001000 // CAN0_RX / UART2_RX +#define SYSCTL_DC7_SSI0_TX 0x00000800 // SSI0 TX on uDMA Ch11 +#define SYSCTL_DC7_DMACH11 0x00000800 // SSI0_TX / SSI1_TX +#define SYSCTL_DC7_SSI0_RX 0x00000400 // SSI0 RX on uDMA Ch10 +#define SYSCTL_DC7_DMACH10 0x00000400 // SSI0_RX / SSI1_RX +#define SYSCTL_DC7_UART0_TX 0x00000200 // UART0 TX on uDMA Ch9 +#define SYSCTL_DC7_DMACH9 0x00000200 // UART0_TX / UART1_TX +#define SYSCTL_DC7_DMACH8 0x00000100 // UART0_RX / UART1_RX +#define SYSCTL_DC7_UART0_RX 0x00000100 // UART0 RX on uDMA Ch8 +#define SYSCTL_DC7_DMACH7 0x00000080 // ETH_TX / Timer2B +#define SYSCTL_DC7_DMACH6 0x00000040 // ETH_RX / Timer2A +#define SYSCTL_DC7_DMACH5 0x00000020 // USB_EP3_TX / Timer2B +#define SYSCTL_DC7_USB_EP3_TX 0x00000020 // USB EP3 TX on uDMA Ch5 +#define SYSCTL_DC7_USB_EP3_RX 0x00000010 // USB EP3 RX on uDMA Ch4 +#define SYSCTL_DC7_DMACH4 0x00000010 // USB_EP3_RX / Timer2A +#define SYSCTL_DC7_USB_EP2_TX 0x00000008 // USB EP2 TX on uDMA Ch3 +#define SYSCTL_DC7_DMACH3 0x00000008 // USB_EP2_TX / Timer3B +#define SYSCTL_DC7_USB_EP2_RX 0x00000004 // USB EP2 RX on uDMA Ch2 +#define SYSCTL_DC7_DMACH2 0x00000004 // USB_EP2_RX / Timer3A +#define SYSCTL_DC7_USB_EP1_TX 0x00000002 // USB EP1 TX on uDMA Ch1 +#define SYSCTL_DC7_DMACH1 0x00000002 // USB_EP1_TX / UART2_TX +#define SYSCTL_DC7_DMACH0 0x00000001 // USB_EP1_RX / UART2_RX +#define SYSCTL_DC7_USB_EP1_RX 0x00000001 // USB EP1 RX on uDMA Ch0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DC8 register. +// +//***************************************************************************** +#define SYSCTL_DC8_ADC1AIN15 0x80000000 // ADC Module 1 AIN15 Pin Present +#define SYSCTL_DC8_ADC1AIN14 0x40000000 // ADC Module 1 AIN14 Pin Present +#define SYSCTL_DC8_ADC1AIN13 0x20000000 // ADC Module 1 AIN13 Pin Present +#define SYSCTL_DC8_ADC1AIN12 0x10000000 // ADC Module 1 AIN12 Pin Present +#define SYSCTL_DC8_ADC1AIN11 0x08000000 // ADC Module 1 AIN11 Pin Present +#define SYSCTL_DC8_ADC1AIN10 0x04000000 // ADC Module 1 AIN10 Pin Present +#define SYSCTL_DC8_ADC1AIN9 0x02000000 // ADC Module 1 AIN9 Pin Present +#define SYSCTL_DC8_ADC1AIN8 0x01000000 // ADC Module 1 AIN8 Pin Present +#define SYSCTL_DC8_ADC1AIN7 0x00800000 // ADC Module 1 AIN7 Pin Present +#define SYSCTL_DC8_ADC1AIN6 0x00400000 // ADC Module 1 AIN6 Pin Present +#define SYSCTL_DC8_ADC1AIN5 0x00200000 // ADC Module 1 AIN5 Pin Present +#define SYSCTL_DC8_ADC1AIN4 0x00100000 // ADC Module 1 AIN4 Pin Present +#define SYSCTL_DC8_ADC1AIN3 0x00080000 // ADC Module 1 AIN3 Pin Present +#define SYSCTL_DC8_ADC1AIN2 0x00040000 // ADC Module 1 AIN2 Pin Present +#define SYSCTL_DC8_ADC1AIN1 0x00020000 // ADC Module 1 AIN1 Pin Present +#define SYSCTL_DC8_ADC1AIN0 0x00010000 // ADC Module 1 AIN0 Pin Present +#define SYSCTL_DC8_ADC0AIN15 0x00008000 // ADC Module 0 AIN15 Pin Present +#define SYSCTL_DC8_ADC0AIN14 0x00004000 // ADC Module 0 AIN14 Pin Present +#define SYSCTL_DC8_ADC0AIN13 0x00002000 // ADC Module 0 AIN13 Pin Present +#define SYSCTL_DC8_ADC0AIN12 0x00001000 // ADC Module 0 AIN12 Pin Present +#define SYSCTL_DC8_ADC0AIN11 0x00000800 // ADC Module 0 AIN11 Pin Present +#define SYSCTL_DC8_ADC0AIN10 0x00000400 // ADC Module 0 AIN10 Pin Present +#define SYSCTL_DC8_ADC0AIN9 0x00000200 // ADC Module 0 AIN9 Pin Present +#define SYSCTL_DC8_ADC0AIN8 0x00000100 // ADC Module 0 AIN8 Pin Present +#define SYSCTL_DC8_ADC0AIN7 0x00000080 // ADC Module 0 AIN7 Pin Present +#define SYSCTL_DC8_ADC0AIN6 0x00000040 // ADC Module 0 AIN6 Pin Present +#define SYSCTL_DC8_ADC0AIN5 0x00000020 // ADC Module 0 AIN5 Pin Present +#define SYSCTL_DC8_ADC0AIN4 0x00000010 // ADC Module 0 AIN4 Pin Present +#define SYSCTL_DC8_ADC0AIN3 0x00000008 // ADC Module 0 AIN3 Pin Present +#define SYSCTL_DC8_ADC0AIN2 0x00000004 // ADC Module 0 AIN2 Pin Present +#define SYSCTL_DC8_ADC0AIN1 0x00000002 // ADC Module 0 AIN1 Pin Present +#define SYSCTL_DC8_ADC0AIN0 0x00000001 // ADC Module 0 AIN0 Pin Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PBORCTL register. +// +//***************************************************************************** +#define SYSCTL_PBORCTL_BORTIM_M 0x0000FFFC // BOR Time Delay +#define SYSCTL_PBORCTL_BORIOR 0x00000002 // BOR Interrupt or Reset +#define SYSCTL_PBORCTL_BORWT 0x00000001 // BOR Wait and Check for Noise +#define SYSCTL_PBORCTL_BORTIM_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_LDOPCTL register. +// +//***************************************************************************** +#define SYSCTL_LDOPCTL_M 0x0000003F // LDO Output Voltage +#define SYSCTL_LDOPCTL_2_50V 0x00000000 // 2.50 +#define SYSCTL_LDOPCTL_2_45V 0x00000001 // 2.45 +#define SYSCTL_LDOPCTL_2_40V 0x00000002 // 2.40 +#define SYSCTL_LDOPCTL_2_35V 0x00000003 // 2.35 +#define SYSCTL_LDOPCTL_2_30V 0x00000004 // 2.30 +#define SYSCTL_LDOPCTL_2_25V 0x00000005 // 2.25 +#define SYSCTL_LDOPCTL_2_75V 0x0000001B // 2.75 +#define SYSCTL_LDOPCTL_2_70V 0x0000001C // 2.70 +#define SYSCTL_LDOPCTL_2_65V 0x0000001D // 2.65 +#define SYSCTL_LDOPCTL_2_60V 0x0000001E // 2.60 +#define SYSCTL_LDOPCTL_2_55V 0x0000001F // 2.55 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRCR0 register. +// +//***************************************************************************** +#define SYSCTL_SRCR0_WDT1 0x10000000 // WDT1 Reset Control +#define SYSCTL_SRCR0_CAN2 0x04000000 // CAN2 Reset Control +#define SYSCTL_SRCR0_CAN1 0x02000000 // CAN1 Reset Control +#define SYSCTL_SRCR0_CAN0 0x01000000 // CAN0 Reset Control +#define SYSCTL_SRCR0_PWM 0x00100000 // PWM Reset Control +#define SYSCTL_SRCR0_ADC1 0x00020000 // ADC1 Reset Control +#define SYSCTL_SRCR0_ADC0 0x00010000 // ADC0 Reset Control +#define SYSCTL_SRCR0_HIB 0x00000040 // HIB Reset Control +#define SYSCTL_SRCR0_WDT0 0x00000008 // WDT0 Reset Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRCR1 register. +// +//***************************************************************************** +#define SYSCTL_SRCR1_EPI0 0x40000000 // EPI0 Reset Control +#define SYSCTL_SRCR1_I2S0 0x10000000 // I2S0 Reset Control +#define SYSCTL_SRCR1_COMP2 0x04000000 // Analog Comp 2 Reset Control +#define SYSCTL_SRCR1_COMP1 0x02000000 // Analog Comp 1 Reset Control +#define SYSCTL_SRCR1_COMP0 0x01000000 // Analog Comp 0 Reset Control +#define SYSCTL_SRCR1_TIMER3 0x00080000 // Timer 3 Reset Control +#define SYSCTL_SRCR1_TIMER2 0x00040000 // Timer 2 Reset Control +#define SYSCTL_SRCR1_TIMER1 0x00020000 // Timer 1 Reset Control +#define SYSCTL_SRCR1_TIMER0 0x00010000 // Timer 0 Reset Control +#define SYSCTL_SRCR1_I2C1 0x00004000 // I2C1 Reset Control +#define SYSCTL_SRCR1_I2C0 0x00001000 // I2C0 Reset Control +#define SYSCTL_SRCR1_QEI1 0x00000200 // QEI1 Reset Control +#define SYSCTL_SRCR1_QEI0 0x00000100 // QEI0 Reset Control +#define SYSCTL_SRCR1_SSI1 0x00000020 // SSI1 Reset Control +#define SYSCTL_SRCR1_SSI0 0x00000010 // SSI0 Reset Control +#define SYSCTL_SRCR1_UART2 0x00000004 // UART2 Reset Control +#define SYSCTL_SRCR1_UART1 0x00000002 // UART1 Reset Control +#define SYSCTL_SRCR1_UART0 0x00000001 // UART0 Reset Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRCR2 register. +// +//***************************************************************************** +#define SYSCTL_SRCR2_EPHY0 0x40000000 // PHY0 Reset Control +#define SYSCTL_SRCR2_EMAC0 0x10000000 // MAC0 Reset Control +#define SYSCTL_SRCR2_USB0 0x00010000 // USB0 Reset Control +#define SYSCTL_SRCR2_UDMA 0x00002000 // Micro-DMA Reset Control +#define SYSCTL_SRCR2_GPIOJ 0x00000100 // Port J Reset Control +#define SYSCTL_SRCR2_GPIOH 0x00000080 // Port H Reset Control +#define SYSCTL_SRCR2_GPIOG 0x00000040 // Port G Reset Control +#define SYSCTL_SRCR2_GPIOF 0x00000020 // Port F Reset Control +#define SYSCTL_SRCR2_GPIOE 0x00000010 // Port E Reset Control +#define SYSCTL_SRCR2_GPIOD 0x00000008 // Port D Reset Control +#define SYSCTL_SRCR2_GPIOC 0x00000004 // Port C Reset Control +#define SYSCTL_SRCR2_GPIOB 0x00000002 // Port B Reset Control +#define SYSCTL_SRCR2_GPIOA 0x00000001 // Port A Reset Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RIS register. +// +//***************************************************************************** +#define SYSCTL_RIS_MOSCPUPRIS 0x00000100 // MOSC Power Up Raw Interrupt + // Status +#define SYSCTL_RIS_USBPLLLRIS 0x00000080 // USB PLL Lock Raw Interrupt + // Status +#define SYSCTL_RIS_PLLLRIS 0x00000040 // PLL Lock Raw Interrupt Status +#define SYSCTL_RIS_CLRIS 0x00000020 // Current Limit Raw Interrupt + // Status +#define SYSCTL_RIS_IOFRIS 0x00000010 // Internal Oscillator Fault Raw + // Interrupt Status +#define SYSCTL_RIS_MOFRIS 0x00000008 // Main Oscillator Fault Raw + // Interrupt Status +#define SYSCTL_RIS_LDORIS 0x00000004 // LDO Power Unregulated Raw + // Interrupt Status +#define SYSCTL_RIS_BORRIS 0x00000002 // Brown-Out Reset Raw Interrupt + // Status +#define SYSCTL_RIS_PLLFRIS 0x00000001 // PLL Fault Raw Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_IMC register. +// +//***************************************************************************** +#define SYSCTL_IMC_MOSCPUPIM 0x00000100 // MOSC Power Up Interrupt Mask +#define SYSCTL_IMC_USBPLLLIM 0x00000080 // USB PLL Lock Interrupt Mask +#define SYSCTL_IMC_PLLLIM 0x00000040 // PLL Lock Interrupt Mask +#define SYSCTL_IMC_CLIM 0x00000020 // Current Limit Interrupt Mask +#define SYSCTL_IMC_IOFIM 0x00000010 // Internal Oscillator Fault + // Interrupt Mask +#define SYSCTL_IMC_MOFIM 0x00000008 // Main Oscillator Fault Interrupt + // Mask +#define SYSCTL_IMC_LDOIM 0x00000004 // LDO Power Unregulated Interrupt + // Mask +#define SYSCTL_IMC_BORIM 0x00000002 // Brown-Out Reset Interrupt Mask +#define SYSCTL_IMC_PLLFIM 0x00000001 // PLL Fault Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_MISC register. +// +//***************************************************************************** +#define SYSCTL_MISC_MOSCPUPMIS 0x00000100 // MOSC Power Up Masked Interrupt + // Status +#define SYSCTL_MISC_USBPLLLMIS 0x00000080 // USB PLL Lock Masked Interrupt + // Status +#define SYSCTL_MISC_PLLLMIS 0x00000040 // PLL Lock Masked Interrupt Status +#define SYSCTL_MISC_CLMIS 0x00000020 // Current Limit Masked Interrupt + // Status +#define SYSCTL_MISC_IOFMIS 0x00000010 // Internal Oscillator Fault Masked + // Interrupt Status +#define SYSCTL_MISC_MOFMIS 0x00000008 // Main Oscillator Fault Masked + // Interrupt Status +#define SYSCTL_MISC_LDOMIS 0x00000004 // LDO Power Unregulated Masked + // Interrupt Status +#define SYSCTL_MISC_BORMIS 0x00000002 // BOR Masked Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RESC register. +// +//***************************************************************************** +#define SYSCTL_RESC_MOSCFAIL 0x00010000 // MOSC Failure Reset +#define SYSCTL_RESC_LDO 0x00000020 // LDO Reset +#define SYSCTL_RESC_WDT1 0x00000020 // Watchdog Timer 1 Reset +#define SYSCTL_RESC_SW 0x00000010 // Software Reset +#define SYSCTL_RESC_WDT0 0x00000008 // Watchdog Timer 0 Reset +#define SYSCTL_RESC_BOR 0x00000004 // Brown-Out Reset +#define SYSCTL_RESC_POR 0x00000002 // Power-On Reset +#define SYSCTL_RESC_EXT 0x00000001 // External Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCC register. +// +//***************************************************************************** +#define SYSCTL_RCC_ACG 0x08000000 // Auto Clock Gating +#define SYSCTL_RCC_SYSDIV_M 0x07800000 // System Clock Divisor +#define SYSCTL_RCC_SYSDIV_2 0x00800000 // System clock /2 +#define SYSCTL_RCC_SYSDIV_3 0x01000000 // System clock /3 +#define SYSCTL_RCC_SYSDIV_4 0x01800000 // System clock /4 +#define SYSCTL_RCC_SYSDIV_5 0x02000000 // System clock /5 +#define SYSCTL_RCC_SYSDIV_6 0x02800000 // System clock /6 +#define SYSCTL_RCC_SYSDIV_7 0x03000000 // System clock /7 +#define SYSCTL_RCC_SYSDIV_8 0x03800000 // System clock /8 +#define SYSCTL_RCC_SYSDIV_9 0x04000000 // System clock /9 +#define SYSCTL_RCC_SYSDIV_10 0x04800000 // System clock /10 +#define SYSCTL_RCC_SYSDIV_11 0x05000000 // System clock /11 +#define SYSCTL_RCC_SYSDIV_12 0x05800000 // System clock /12 +#define SYSCTL_RCC_SYSDIV_13 0x06000000 // System clock /13 +#define SYSCTL_RCC_SYSDIV_14 0x06800000 // System clock /14 +#define SYSCTL_RCC_SYSDIV_15 0x07000000 // System clock /15 +#define SYSCTL_RCC_SYSDIV_16 0x07800000 // System clock /16 +#define SYSCTL_RCC_USESYSDIV 0x00400000 // Enable System Clock Divider +#define SYSCTL_RCC_USEPWMDIV 0x00100000 // Enable PWM Clock Divisor +#define SYSCTL_RCC_PWMDIV_M 0x000E0000 // PWM Unit Clock Divisor +#define SYSCTL_RCC_PWMDIV_2 0x00000000 // PWM clock /2 +#define SYSCTL_RCC_PWMDIV_4 0x00020000 // PWM clock /4 +#define SYSCTL_RCC_PWMDIV_8 0x00040000 // PWM clock /8 +#define SYSCTL_RCC_PWMDIV_16 0x00060000 // PWM clock /16 +#define SYSCTL_RCC_PWMDIV_32 0x00080000 // PWM clock /32 +#define SYSCTL_RCC_PWMDIV_64 0x000A0000 // PWM clock /64 +#define SYSCTL_RCC_PWRDN 0x00002000 // PLL Power Down +#define SYSCTL_RCC_OEN 0x00001000 // PLL Output Enable +#define SYSCTL_RCC_BYPASS 0x00000800 // PLL Bypass +#define SYSCTL_RCC_XTAL_M 0x000007C0 // Crystal Value +#define SYSCTL_RCC_XTAL_1MHZ 0x00000000 // 1 MHz +#define SYSCTL_RCC_XTAL_1_84MHZ 0x00000040 // 1.8432 MHz +#define SYSCTL_RCC_XTAL_2MHZ 0x00000080 // 2 MHz +#define SYSCTL_RCC_XTAL_2_45MHZ 0x000000C0 // 2.4576 MHz +#define SYSCTL_RCC_XTAL_3_57MHZ 0x00000100 // 3.579545 MHz +#define SYSCTL_RCC_XTAL_3_68MHZ 0x00000140 // 3.6864 MHz +#define SYSCTL_RCC_XTAL_4MHZ 0x00000180 // 4 MHz +#define SYSCTL_RCC_XTAL_4_09MHZ 0x000001C0 // 4.096 MHz +#define SYSCTL_RCC_XTAL_4_91MHZ 0x00000200 // 4.9152 MHz +#define SYSCTL_RCC_XTAL_5MHZ 0x00000240 // 5 MHz +#define SYSCTL_RCC_XTAL_5_12MHZ 0x00000280 // 5.12 MHz +#define SYSCTL_RCC_XTAL_6MHZ 0x000002C0 // 6 MHz +#define SYSCTL_RCC_XTAL_6_14MHZ 0x00000300 // 6.144 MHz +#define SYSCTL_RCC_XTAL_7_37MHZ 0x00000340 // 7.3728 MHz +#define SYSCTL_RCC_XTAL_8MHZ 0x00000380 // 8 MHz +#define SYSCTL_RCC_XTAL_8_19MHZ 0x000003C0 // 8.192 MHz +#define SYSCTL_RCC_XTAL_10MHZ 0x00000400 // 10 MHz +#define SYSCTL_RCC_XTAL_12MHZ 0x00000440 // 12 MHz +#define SYSCTL_RCC_XTAL_12_2MHZ 0x00000480 // 12.288 MHz +#define SYSCTL_RCC_XTAL_13_5MHZ 0x000004C0 // 13.56 MHz +#define SYSCTL_RCC_XTAL_14_3MHZ 0x00000500 // 14.31818 MHz +#define SYSCTL_RCC_XTAL_16MHZ 0x00000540 // 16 MHz +#define SYSCTL_RCC_XTAL_16_3MHZ 0x00000580 // 16.384 MHz +#define SYSCTL_RCC_PLLVER 0x00000400 // PLL Verification +#define SYSCTL_RCC_OSCSRC_M 0x00000030 // Oscillator Source +#define SYSCTL_RCC_OSCSRC_MAIN 0x00000000 // MOSC +#define SYSCTL_RCC_OSCSRC_INT 0x00000010 // IOSC +#define SYSCTL_RCC_OSCSRC_INT4 0x00000020 // IOSC/4 +#define SYSCTL_RCC_OSCSRC_30 0x00000030 // 30 kHz +#define SYSCTL_RCC_IOSCVER 0x00000008 // Internal Oscillator Verification + // Timer +#define SYSCTL_RCC_MOSCVER 0x00000004 // Main Oscillator Verification + // Timer +#define SYSCTL_RCC_IOSCDIS 0x00000002 // Internal Oscillator Disable +#define SYSCTL_RCC_MOSCDIS 0x00000001 // Main Oscillator Disable +#define SYSCTL_RCC_SYSDIV_S 23 +#define SYSCTL_RCC_PWMDIV_S 17 // Shift to the PWMDIV field +#define SYSCTL_RCC_XTAL_S 6 // Shift to the XTAL field +#define SYSCTL_RCC_OSCSRC_S 4 // Shift to the OSCSRC field + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PLLCFG register. +// +//***************************************************************************** +#define SYSCTL_PLLCFG_OD_M 0x0000C000 // PLL OD Value +#define SYSCTL_PLLCFG_OD_1 0x00000000 // Divide by 1 +#define SYSCTL_PLLCFG_OD_2 0x00004000 // Divide by 2 +#define SYSCTL_PLLCFG_OD_4 0x00008000 // Divide by 4 +#define SYSCTL_PLLCFG_F_M 0x00003FE0 // PLL F Value +#define SYSCTL_PLLCFG_R_M 0x0000001F // PLL R Value +#define SYSCTL_PLLCFG_F_S 5 +#define SYSCTL_PLLCFG_R_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_GPIOHSCTL +// register. +// +//***************************************************************************** +#define SYSCTL_GPIOHSCTL_PORTH 0x00000080 // Port H High-Speed +#define SYSCTL_GPIOHSCTL_PORTG 0x00000040 // Port G High-Speed +#define SYSCTL_GPIOHSCTL_PORTF 0x00000020 // Port F High-Speed +#define SYSCTL_GPIOHSCTL_PORTE 0x00000010 // Port E High-Speed +#define SYSCTL_GPIOHSCTL_PORTD 0x00000008 // Port D High-Speed +#define SYSCTL_GPIOHSCTL_PORTC 0x00000004 // Port C High-Speed +#define SYSCTL_GPIOHSCTL_PORTB 0x00000002 // Port B High-Speed +#define SYSCTL_GPIOHSCTL_PORTA 0x00000001 // Port A High-Speed + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_GPIOHBCTL +// register. +// +//***************************************************************************** +#define SYSCTL_GPIOHBCTL_PORTJ 0x00000100 // Port J Advanced High-Performance + // Bus +#define SYSCTL_GPIOHBCTL_PORTH 0x00000080 // Port H Advanced High-Performance + // Bus +#define SYSCTL_GPIOHBCTL_PORTG 0x00000040 // Port G Advanced High-Performance + // Bus +#define SYSCTL_GPIOHBCTL_PORTF 0x00000020 // Port F Advanced High-Performance + // Bus +#define SYSCTL_GPIOHBCTL_PORTE 0x00000010 // Port E Advanced High-Performance + // Bus +#define SYSCTL_GPIOHBCTL_PORTD 0x00000008 // Port D Advanced High-Performance + // Bus +#define SYSCTL_GPIOHBCTL_PORTC 0x00000004 // Port C Advanced High-Performance + // Bus +#define SYSCTL_GPIOHBCTL_PORTB 0x00000002 // Port B Advanced High-Performance + // Bus +#define SYSCTL_GPIOHBCTL_PORTA 0x00000001 // Port A Advanced High-Performance + // Bus + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCC2 register. +// +//***************************************************************************** +#define SYSCTL_RCC2_USERCC2 0x80000000 // Use RCC2 +#define SYSCTL_RCC2_DIV400 0x40000000 // Divide PLL as 400 MHz vs. 200 + // MHz +#define SYSCTL_RCC2_SYSDIV2_M 0x1F800000 // System Clock Divisor 2 +#define SYSCTL_RCC2_SYSDIV2_2 0x00800000 // System clock /2 +#define SYSCTL_RCC2_SYSDIV2_3 0x01000000 // System clock /3 +#define SYSCTL_RCC2_SYSDIV2_4 0x01800000 // System clock /4 +#define SYSCTL_RCC2_SYSDIV2_5 0x02000000 // System clock /5 +#define SYSCTL_RCC2_SYSDIV2_6 0x02800000 // System clock /6 +#define SYSCTL_RCC2_SYSDIV2_7 0x03000000 // System clock /7 +#define SYSCTL_RCC2_SYSDIV2_8 0x03800000 // System clock /8 +#define SYSCTL_RCC2_SYSDIV2_9 0x04000000 // System clock /9 +#define SYSCTL_RCC2_SYSDIV2_10 0x04800000 // System clock /10 +#define SYSCTL_RCC2_SYSDIV2_11 0x05000000 // System clock /11 +#define SYSCTL_RCC2_SYSDIV2_12 0x05800000 // System clock /12 +#define SYSCTL_RCC2_SYSDIV2_13 0x06000000 // System clock /13 +#define SYSCTL_RCC2_SYSDIV2_14 0x06800000 // System clock /14 +#define SYSCTL_RCC2_SYSDIV2_15 0x07000000 // System clock /15 +#define SYSCTL_RCC2_SYSDIV2_16 0x07800000 // System clock /16 +#define SYSCTL_RCC2_SYSDIV2_17 0x08000000 // System clock /17 +#define SYSCTL_RCC2_SYSDIV2_18 0x08800000 // System clock /18 +#define SYSCTL_RCC2_SYSDIV2_19 0x09000000 // System clock /19 +#define SYSCTL_RCC2_SYSDIV2_20 0x09800000 // System clock /20 +#define SYSCTL_RCC2_SYSDIV2_21 0x0A000000 // System clock /21 +#define SYSCTL_RCC2_SYSDIV2_22 0x0A800000 // System clock /22 +#define SYSCTL_RCC2_SYSDIV2_23 0x0B000000 // System clock /23 +#define SYSCTL_RCC2_SYSDIV2_24 0x0B800000 // System clock /24 +#define SYSCTL_RCC2_SYSDIV2_25 0x0C000000 // System clock /25 +#define SYSCTL_RCC2_SYSDIV2_26 0x0C800000 // System clock /26 +#define SYSCTL_RCC2_SYSDIV2_27 0x0D000000 // System clock /27 +#define SYSCTL_RCC2_SYSDIV2_28 0x0D800000 // System clock /28 +#define SYSCTL_RCC2_SYSDIV2_29 0x0E000000 // System clock /29 +#define SYSCTL_RCC2_SYSDIV2_30 0x0E800000 // System clock /30 +#define SYSCTL_RCC2_SYSDIV2_31 0x0F000000 // System clock /31 +#define SYSCTL_RCC2_SYSDIV2_32 0x0F800000 // System clock /32 +#define SYSCTL_RCC2_SYSDIV2_33 0x10000000 // System clock /33 +#define SYSCTL_RCC2_SYSDIV2_34 0x10800000 // System clock /34 +#define SYSCTL_RCC2_SYSDIV2_35 0x11000000 // System clock /35 +#define SYSCTL_RCC2_SYSDIV2_36 0x11800000 // System clock /36 +#define SYSCTL_RCC2_SYSDIV2_37 0x12000000 // System clock /37 +#define SYSCTL_RCC2_SYSDIV2_38 0x12800000 // System clock /38 +#define SYSCTL_RCC2_SYSDIV2_39 0x13000000 // System clock /39 +#define SYSCTL_RCC2_SYSDIV2_40 0x13800000 // System clock /40 +#define SYSCTL_RCC2_SYSDIV2_41 0x14000000 // System clock /41 +#define SYSCTL_RCC2_SYSDIV2_42 0x14800000 // System clock /42 +#define SYSCTL_RCC2_SYSDIV2_43 0x15000000 // System clock /43 +#define SYSCTL_RCC2_SYSDIV2_44 0x15800000 // System clock /44 +#define SYSCTL_RCC2_SYSDIV2_45 0x16000000 // System clock /45 +#define SYSCTL_RCC2_SYSDIV2_46 0x16800000 // System clock /46 +#define SYSCTL_RCC2_SYSDIV2_47 0x17000000 // System clock /47 +#define SYSCTL_RCC2_SYSDIV2_48 0x17800000 // System clock /48 +#define SYSCTL_RCC2_SYSDIV2_49 0x18000000 // System clock /49 +#define SYSCTL_RCC2_SYSDIV2_50 0x18800000 // System clock /50 +#define SYSCTL_RCC2_SYSDIV2_51 0x19000000 // System clock /51 +#define SYSCTL_RCC2_SYSDIV2_52 0x19800000 // System clock /52 +#define SYSCTL_RCC2_SYSDIV2_53 0x1A000000 // System clock /53 +#define SYSCTL_RCC2_SYSDIV2_54 0x1A800000 // System clock /54 +#define SYSCTL_RCC2_SYSDIV2_55 0x1B000000 // System clock /55 +#define SYSCTL_RCC2_SYSDIV2_56 0x1B800000 // System clock /56 +#define SYSCTL_RCC2_SYSDIV2_57 0x1C000000 // System clock /57 +#define SYSCTL_RCC2_SYSDIV2_58 0x1C800000 // System clock /58 +#define SYSCTL_RCC2_SYSDIV2_59 0x1D000000 // System clock /59 +#define SYSCTL_RCC2_SYSDIV2_60 0x1D800000 // System clock /60 +#define SYSCTL_RCC2_SYSDIV2_61 0x1E000000 // System clock /61 +#define SYSCTL_RCC2_SYSDIV2_62 0x1E800000 // System clock /62 +#define SYSCTL_RCC2_SYSDIV2_63 0x1F000000 // System clock /63 +#define SYSCTL_RCC2_SYSDIV2_64 0x1F800000 // System clock /64 +#define SYSCTL_RCC2_SYSDIV2LSB 0x00400000 // Additional LSB for SYSDIV2 +#define SYSCTL_RCC2_USBPWRDN 0x00004000 // Power-Down USB PLL +#define SYSCTL_RCC2_PWRDN2 0x00002000 // Power-Down PLL 2 +#define SYSCTL_RCC2_BYPASS2 0x00000800 // PLL Bypass 2 +#define SYSCTL_RCC2_OSCSRC2_M 0x00000070 // Oscillator Source 2 +#define SYSCTL_RCC2_OSCSRC2_MO 0x00000000 // MOSC +#define SYSCTL_RCC2_OSCSRC2_IO 0x00000010 // PIOSC +#define SYSCTL_RCC2_OSCSRC2_IO4 0x00000020 // PIOSC/4 +#define SYSCTL_RCC2_OSCSRC2_30 0x00000030 // 30 kHz +#define SYSCTL_RCC2_OSCSRC2_419 0x00000060 // 4.194304 MHz +#define SYSCTL_RCC2_OSCSRC2_32 0x00000070 // 32.768 kHz +#define SYSCTL_RCC2_SYSDIV2_S 23 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_MOSCCTL register. +// +//***************************************************************************** +#define SYSCTL_MOSCCTL_CVAL 0x00000001 // Clock Validation for MOSC + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGC0 register. +// +//***************************************************************************** +#define SYSCTL_RCGC0_WDT1 0x10000000 // WDT1 Clock Gating Control +#define SYSCTL_RCGC0_CAN2 0x04000000 // CAN2 Clock Gating Control +#define SYSCTL_RCGC0_CAN1 0x02000000 // CAN1 Clock Gating Control +#define SYSCTL_RCGC0_CAN0 0x01000000 // CAN0 Clock Gating Control +#define SYSCTL_RCGC0_PWM 0x00100000 // PWM Clock Gating Control +#define SYSCTL_RCGC0_ADC1 0x00020000 // ADC1 Clock Gating Control +#define SYSCTL_RCGC0_ADC0 0x00010000 // ADC0 Clock Gating Control +#define SYSCTL_RCGC0_ADCSPD_M 0x00000F00 // ADC Sample Speed +#define SYSCTL_RCGC0_ADCSPD125K 0x00000000 // 125K samples/second +#define SYSCTL_RCGC0_ADCSPD250K 0x00000100 // 250K samples/second +#define SYSCTL_RCGC0_ADCSPD500K 0x00000200 // 500K samples/second +#define SYSCTL_RCGC0_ADCSPD1M 0x00000300 // 1M samples/second +#define SYSCTL_RCGC0_ADC1SPD_M 0x00000C00 // ADC1 Sample Speed +#define SYSCTL_RCGC0_ADC1SPD_125K \ + 0x00000000 // 125K samples/second +#define SYSCTL_RCGC0_ADC1SPD_250K \ + 0x00000400 // 250K samples/second +#define SYSCTL_RCGC0_ADC1SPD_500K \ + 0x00000800 // 500K samples/second +#define SYSCTL_RCGC0_ADC1SPD_1M 0x00000C00 // 1M samples/second +#define SYSCTL_RCGC0_ADC0SPD_M 0x00000300 // ADC0 Sample Speed +#define SYSCTL_RCGC0_ADC0SPD_125K \ + 0x00000000 // 125K samples/second +#define SYSCTL_RCGC0_ADC0SPD_250K \ + 0x00000100 // 250K samples/second +#define SYSCTL_RCGC0_ADC0SPD_500K \ + 0x00000200 // 500K samples/second +#define SYSCTL_RCGC0_ADC0SPD_1M 0x00000300 // 1M samples/second +#define SYSCTL_RCGC0_HIB 0x00000040 // HIB Clock Gating Control +#define SYSCTL_RCGC0_WDT0 0x00000008 // WDT0 Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGC1 register. +// +//***************************************************************************** +#define SYSCTL_RCGC1_EPI0 0x40000000 // EPI0 Clock Gating +#define SYSCTL_RCGC1_I2S0 0x10000000 // I2S0 Clock Gating +#define SYSCTL_RCGC1_COMP2 0x04000000 // Analog Comparator 2 Clock Gating +#define SYSCTL_RCGC1_COMP1 0x02000000 // Analog Comparator 1 Clock Gating +#define SYSCTL_RCGC1_COMP0 0x01000000 // Analog Comparator 0 Clock Gating +#define SYSCTL_RCGC1_TIMER3 0x00080000 // Timer 3 Clock Gating Control +#define SYSCTL_RCGC1_TIMER2 0x00040000 // Timer 2 Clock Gating Control +#define SYSCTL_RCGC1_TIMER1 0x00020000 // Timer 1 Clock Gating Control +#define SYSCTL_RCGC1_TIMER0 0x00010000 // Timer 0 Clock Gating Control +#define SYSCTL_RCGC1_I2C1 0x00004000 // I2C1 Clock Gating Control +#define SYSCTL_RCGC1_I2C0 0x00001000 // I2C0 Clock Gating Control +#define SYSCTL_RCGC1_QEI1 0x00000200 // QEI1 Clock Gating Control +#define SYSCTL_RCGC1_QEI0 0x00000100 // QEI0 Clock Gating Control +#define SYSCTL_RCGC1_SSI1 0x00000020 // SSI1 Clock Gating Control +#define SYSCTL_RCGC1_SSI0 0x00000010 // SSI0 Clock Gating Control +#define SYSCTL_RCGC1_UART2 0x00000004 // UART2 Clock Gating Control +#define SYSCTL_RCGC1_UART1 0x00000002 // UART1 Clock Gating Control +#define SYSCTL_RCGC1_UART0 0x00000001 // UART0 Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGC2 register. +// +//***************************************************************************** +#define SYSCTL_RCGC2_EPHY0 0x40000000 // PHY0 Clock Gating Control +#define SYSCTL_RCGC2_EMAC0 0x10000000 // MAC0 Clock Gating Control +#define SYSCTL_RCGC2_USB0 0x00010000 // USB0 Clock Gating Control +#define SYSCTL_RCGC2_UDMA 0x00002000 // Micro-DMA Clock Gating Control +#define SYSCTL_RCGC2_GPIOJ 0x00000100 // Port J Clock Gating Control +#define SYSCTL_RCGC2_GPIOH 0x00000080 // Port H Clock Gating Control +#define SYSCTL_RCGC2_GPIOG 0x00000040 // Port G Clock Gating Control +#define SYSCTL_RCGC2_GPIOF 0x00000020 // Port F Clock Gating Control +#define SYSCTL_RCGC2_GPIOE 0x00000010 // Port E Clock Gating Control +#define SYSCTL_RCGC2_GPIOD 0x00000008 // Port D Clock Gating Control +#define SYSCTL_RCGC2_GPIOC 0x00000004 // Port C Clock Gating Control +#define SYSCTL_RCGC2_GPIOB 0x00000002 // Port B Clock Gating Control +#define SYSCTL_RCGC2_GPIOA 0x00000001 // Port A Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGC0 register. +// +//***************************************************************************** +#define SYSCTL_SCGC0_WDT1 0x10000000 // WDT1 Clock Gating Control +#define SYSCTL_SCGC0_CAN2 0x04000000 // CAN2 Clock Gating Control +#define SYSCTL_SCGC0_CAN1 0x02000000 // CAN1 Clock Gating Control +#define SYSCTL_SCGC0_CAN0 0x01000000 // CAN0 Clock Gating Control +#define SYSCTL_SCGC0_PWM 0x00100000 // PWM Clock Gating Control +#define SYSCTL_SCGC0_ADC1 0x00020000 // ADC1 Clock Gating Control +#define SYSCTL_SCGC0_ADC0 0x00010000 // ADC0 Clock Gating Control +#define SYSCTL_SCGC0_ADCSPD_M 0x00000F00 // ADC Sample Speed +#define SYSCTL_SCGC0_ADCSPD125K 0x00000000 // 125K samples/second +#define SYSCTL_SCGC0_ADCSPD250K 0x00000100 // 250K samples/second +#define SYSCTL_SCGC0_ADCSPD500K 0x00000200 // 500K samples/second +#define SYSCTL_SCGC0_ADCSPD1M 0x00000300 // 1M samples/second +#define SYSCTL_SCGC0_ADC1SPD_M 0x00000C00 // ADC1 Sample Speed +#define SYSCTL_SCGC0_ADC1SPD_125K \ + 0x00000000 // 125K samples/second +#define SYSCTL_SCGC0_ADC1SPD_250K \ + 0x00000400 // 250K samples/second +#define SYSCTL_SCGC0_ADC1SPD_500K \ + 0x00000800 // 500K samples/second +#define SYSCTL_SCGC0_ADC1SPD_1M 0x00000C00 // 1M samples/second +#define SYSCTL_SCGC0_ADC0SPD_M 0x00000300 // ADC0 Sample Speed +#define SYSCTL_SCGC0_ADC0SPD_125K \ + 0x00000000 // 125K samples/second +#define SYSCTL_SCGC0_ADC0SPD_250K \ + 0x00000100 // 250K samples/second +#define SYSCTL_SCGC0_ADC0SPD_500K \ + 0x00000200 // 500K samples/second +#define SYSCTL_SCGC0_ADC0SPD_1M 0x00000300 // 1M samples/second +#define SYSCTL_SCGC0_HIB 0x00000040 // HIB Clock Gating Control +#define SYSCTL_SCGC0_WDT0 0x00000008 // WDT0 Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGC1 register. +// +//***************************************************************************** +#define SYSCTL_SCGC1_EPI0 0x40000000 // EPI0 Clock Gating +#define SYSCTL_SCGC1_I2S0 0x10000000 // I2S0 Clock Gating +#define SYSCTL_SCGC1_COMP2 0x04000000 // Analog Comparator 2 Clock Gating +#define SYSCTL_SCGC1_COMP1 0x02000000 // Analog Comparator 1 Clock Gating +#define SYSCTL_SCGC1_COMP0 0x01000000 // Analog Comparator 0 Clock Gating +#define SYSCTL_SCGC1_TIMER3 0x00080000 // Timer 3 Clock Gating Control +#define SYSCTL_SCGC1_TIMER2 0x00040000 // Timer 2 Clock Gating Control +#define SYSCTL_SCGC1_TIMER1 0x00020000 // Timer 1 Clock Gating Control +#define SYSCTL_SCGC1_TIMER0 0x00010000 // Timer 0 Clock Gating Control +#define SYSCTL_SCGC1_I2C1 0x00004000 // I2C1 Clock Gating Control +#define SYSCTL_SCGC1_I2C0 0x00001000 // I2C0 Clock Gating Control +#define SYSCTL_SCGC1_QEI1 0x00000200 // QEI1 Clock Gating Control +#define SYSCTL_SCGC1_QEI0 0x00000100 // QEI0 Clock Gating Control +#define SYSCTL_SCGC1_SSI1 0x00000020 // SSI1 Clock Gating Control +#define SYSCTL_SCGC1_SSI0 0x00000010 // SSI0 Clock Gating Control +#define SYSCTL_SCGC1_UART2 0x00000004 // UART2 Clock Gating Control +#define SYSCTL_SCGC1_UART1 0x00000002 // UART1 Clock Gating Control +#define SYSCTL_SCGC1_UART0 0x00000001 // UART0 Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGC2 register. +// +//***************************************************************************** +#define SYSCTL_SCGC2_EPHY0 0x40000000 // PHY0 Clock Gating Control +#define SYSCTL_SCGC2_EMAC0 0x10000000 // MAC0 Clock Gating Control +#define SYSCTL_SCGC2_USB0 0x00010000 // USB0 Clock Gating Control +#define SYSCTL_SCGC2_UDMA 0x00002000 // Micro-DMA Clock Gating Control +#define SYSCTL_SCGC2_GPIOJ 0x00000100 // Port J Clock Gating Control +#define SYSCTL_SCGC2_GPIOH 0x00000080 // Port H Clock Gating Control +#define SYSCTL_SCGC2_GPIOG 0x00000040 // Port G Clock Gating Control +#define SYSCTL_SCGC2_GPIOF 0x00000020 // Port F Clock Gating Control +#define SYSCTL_SCGC2_GPIOE 0x00000010 // Port E Clock Gating Control +#define SYSCTL_SCGC2_GPIOD 0x00000008 // Port D Clock Gating Control +#define SYSCTL_SCGC2_GPIOC 0x00000004 // Port C Clock Gating Control +#define SYSCTL_SCGC2_GPIOB 0x00000002 // Port B Clock Gating Control +#define SYSCTL_SCGC2_GPIOA 0x00000001 // Port A Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGC0 register. +// +//***************************************************************************** +#define SYSCTL_DCGC0_WDT1 0x10000000 // WDT1 Clock Gating Control +#define SYSCTL_DCGC0_CAN2 0x04000000 // CAN2 Clock Gating Control +#define SYSCTL_DCGC0_CAN1 0x02000000 // CAN1 Clock Gating Control +#define SYSCTL_DCGC0_CAN0 0x01000000 // CAN0 Clock Gating Control +#define SYSCTL_DCGC0_PWM 0x00100000 // PWM Clock Gating Control +#define SYSCTL_DCGC0_ADC1 0x00020000 // ADC1 Clock Gating Control +#define SYSCTL_DCGC0_ADC0 0x00010000 // ADC0 Clock Gating Control +#define SYSCTL_DCGC0_HIB 0x00000040 // HIB Clock Gating Control +#define SYSCTL_DCGC0_WDT0 0x00000008 // WDT0 Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGC1 register. +// +//***************************************************************************** +#define SYSCTL_DCGC1_EPI0 0x40000000 // EPI0 Clock Gating +#define SYSCTL_DCGC1_I2S0 0x10000000 // I2S0 Clock Gating +#define SYSCTL_DCGC1_COMP2 0x04000000 // Analog Comparator 2 Clock Gating +#define SYSCTL_DCGC1_COMP1 0x02000000 // Analog Comparator 1 Clock Gating +#define SYSCTL_DCGC1_COMP0 0x01000000 // Analog Comparator 0 Clock Gating +#define SYSCTL_DCGC1_TIMER3 0x00080000 // Timer 3 Clock Gating Control +#define SYSCTL_DCGC1_TIMER2 0x00040000 // Timer 2 Clock Gating Control +#define SYSCTL_DCGC1_TIMER1 0x00020000 // Timer 1 Clock Gating Control +#define SYSCTL_DCGC1_TIMER0 0x00010000 // Timer 0 Clock Gating Control +#define SYSCTL_DCGC1_I2C1 0x00004000 // I2C1 Clock Gating Control +#define SYSCTL_DCGC1_I2C0 0x00001000 // I2C0 Clock Gating Control +#define SYSCTL_DCGC1_QEI1 0x00000200 // QEI1 Clock Gating Control +#define SYSCTL_DCGC1_QEI0 0x00000100 // QEI0 Clock Gating Control +#define SYSCTL_DCGC1_SSI1 0x00000020 // SSI1 Clock Gating Control +#define SYSCTL_DCGC1_SSI0 0x00000010 // SSI0 Clock Gating Control +#define SYSCTL_DCGC1_UART2 0x00000004 // UART2 Clock Gating Control +#define SYSCTL_DCGC1_UART1 0x00000002 // UART1 Clock Gating Control +#define SYSCTL_DCGC1_UART0 0x00000001 // UART0 Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGC2 register. +// +//***************************************************************************** +#define SYSCTL_DCGC2_EPHY0 0x40000000 // PHY0 Clock Gating Control +#define SYSCTL_DCGC2_EMAC0 0x10000000 // MAC0 Clock Gating Control +#define SYSCTL_DCGC2_USB0 0x00010000 // USB0 Clock Gating Control +#define SYSCTL_DCGC2_UDMA 0x00002000 // Micro-DMA Clock Gating Control +#define SYSCTL_DCGC2_GPIOJ 0x00000100 // Port J Clock Gating Control +#define SYSCTL_DCGC2_GPIOH 0x00000080 // Port H Clock Gating Control +#define SYSCTL_DCGC2_GPIOG 0x00000040 // Port G Clock Gating Control +#define SYSCTL_DCGC2_GPIOF 0x00000020 // Port F Clock Gating Control +#define SYSCTL_DCGC2_GPIOE 0x00000010 // Port E Clock Gating Control +#define SYSCTL_DCGC2_GPIOD 0x00000008 // Port D Clock Gating Control +#define SYSCTL_DCGC2_GPIOC 0x00000004 // Port C Clock Gating Control +#define SYSCTL_DCGC2_GPIOB 0x00000002 // Port B Clock Gating Control +#define SYSCTL_DCGC2_GPIOA 0x00000001 // Port A Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DSLPCLKCFG +// register. +// +//***************************************************************************** +#define SYSCTL_DSLPCLKCFG_D_M 0x1F800000 // Divider Field Override +#define SYSCTL_DSLPCLKCFG_D_1 0x00000000 // System clock /1 +#define SYSCTL_DSLPCLKCFG_D_2 0x00800000 // System clock /2 +#define SYSCTL_DSLPCLKCFG_D_3 0x01000000 // System clock /3 +#define SYSCTL_DSLPCLKCFG_D_4 0x01800000 // System clock /4 +#define SYSCTL_DSLPCLKCFG_D_5 0x02000000 // System clock /5 +#define SYSCTL_DSLPCLKCFG_D_6 0x02800000 // System clock /6 +#define SYSCTL_DSLPCLKCFG_D_7 0x03000000 // System clock /7 +#define SYSCTL_DSLPCLKCFG_D_8 0x03800000 // System clock /8 +#define SYSCTL_DSLPCLKCFG_D_9 0x04000000 // System clock /9 +#define SYSCTL_DSLPCLKCFG_D_10 0x04800000 // System clock /10 +#define SYSCTL_DSLPCLKCFG_D_11 0x05000000 // System clock /11 +#define SYSCTL_DSLPCLKCFG_D_12 0x05800000 // System clock /12 +#define SYSCTL_DSLPCLKCFG_D_13 0x06000000 // System clock /13 +#define SYSCTL_DSLPCLKCFG_D_14 0x06800000 // System clock /14 +#define SYSCTL_DSLPCLKCFG_D_15 0x07000000 // System clock /15 +#define SYSCTL_DSLPCLKCFG_D_16 0x07800000 // System clock /16 +#define SYSCTL_DSLPCLKCFG_D_17 0x08000000 // System clock /17 +#define SYSCTL_DSLPCLKCFG_D_18 0x08800000 // System clock /18 +#define SYSCTL_DSLPCLKCFG_D_19 0x09000000 // System clock /19 +#define SYSCTL_DSLPCLKCFG_D_20 0x09800000 // System clock /20 +#define SYSCTL_DSLPCLKCFG_D_21 0x0A000000 // System clock /21 +#define SYSCTL_DSLPCLKCFG_D_22 0x0A800000 // System clock /22 +#define SYSCTL_DSLPCLKCFG_D_23 0x0B000000 // System clock /23 +#define SYSCTL_DSLPCLKCFG_D_24 0x0B800000 // System clock /24 +#define SYSCTL_DSLPCLKCFG_D_25 0x0C000000 // System clock /25 +#define SYSCTL_DSLPCLKCFG_D_26 0x0C800000 // System clock /26 +#define SYSCTL_DSLPCLKCFG_D_27 0x0D000000 // System clock /27 +#define SYSCTL_DSLPCLKCFG_D_28 0x0D800000 // System clock /28 +#define SYSCTL_DSLPCLKCFG_D_29 0x0E000000 // System clock /29 +#define SYSCTL_DSLPCLKCFG_D_30 0x0E800000 // System clock /30 +#define SYSCTL_DSLPCLKCFG_D_31 0x0F000000 // System clock /31 +#define SYSCTL_DSLPCLKCFG_D_32 0x0F800000 // System clock /32 +#define SYSCTL_DSLPCLKCFG_D_33 0x10000000 // System clock /33 +#define SYSCTL_DSLPCLKCFG_D_34 0x10800000 // System clock /34 +#define SYSCTL_DSLPCLKCFG_D_35 0x11000000 // System clock /35 +#define SYSCTL_DSLPCLKCFG_D_36 0x11800000 // System clock /36 +#define SYSCTL_DSLPCLKCFG_D_37 0x12000000 // System clock /37 +#define SYSCTL_DSLPCLKCFG_D_38 0x12800000 // System clock /38 +#define SYSCTL_DSLPCLKCFG_D_39 0x13000000 // System clock /39 +#define SYSCTL_DSLPCLKCFG_D_40 0x13800000 // System clock /40 +#define SYSCTL_DSLPCLKCFG_D_41 0x14000000 // System clock /41 +#define SYSCTL_DSLPCLKCFG_D_42 0x14800000 // System clock /42 +#define SYSCTL_DSLPCLKCFG_D_43 0x15000000 // System clock /43 +#define SYSCTL_DSLPCLKCFG_D_44 0x15800000 // System clock /44 +#define SYSCTL_DSLPCLKCFG_D_45 0x16000000 // System clock /45 +#define SYSCTL_DSLPCLKCFG_D_46 0x16800000 // System clock /46 +#define SYSCTL_DSLPCLKCFG_D_47 0x17000000 // System clock /47 +#define SYSCTL_DSLPCLKCFG_D_48 0x17800000 // System clock /48 +#define SYSCTL_DSLPCLKCFG_D_49 0x18000000 // System clock /49 +#define SYSCTL_DSLPCLKCFG_D_50 0x18800000 // System clock /50 +#define SYSCTL_DSLPCLKCFG_D_51 0x19000000 // System clock /51 +#define SYSCTL_DSLPCLKCFG_D_52 0x19800000 // System clock /52 +#define SYSCTL_DSLPCLKCFG_D_53 0x1A000000 // System clock /53 +#define SYSCTL_DSLPCLKCFG_D_54 0x1A800000 // System clock /54 +#define SYSCTL_DSLPCLKCFG_D_55 0x1B000000 // System clock /55 +#define SYSCTL_DSLPCLKCFG_D_56 0x1B800000 // System clock /56 +#define SYSCTL_DSLPCLKCFG_D_57 0x1C000000 // System clock /57 +#define SYSCTL_DSLPCLKCFG_D_58 0x1C800000 // System clock /58 +#define SYSCTL_DSLPCLKCFG_D_59 0x1D000000 // System clock /59 +#define SYSCTL_DSLPCLKCFG_D_60 0x1D800000 // System clock /60 +#define SYSCTL_DSLPCLKCFG_D_61 0x1E000000 // System clock /61 +#define SYSCTL_DSLPCLKCFG_D_62 0x1E800000 // System clock /62 +#define SYSCTL_DSLPCLKCFG_D_63 0x1F000000 // System clock /63 +#define SYSCTL_DSLPCLKCFG_D_64 0x1F800000 // System clock /64 +#define SYSCTL_DSLPCLKCFG_O_M 0x00000070 // Clock Source +#define SYSCTL_DSLPCLKCFG_O_IGN 0x00000000 // MOSC +#define SYSCTL_DSLPCLKCFG_O_IO 0x00000010 // PIOSC +#define SYSCTL_DSLPCLKCFG_O_30 0x00000030 // 30 kHz +#define SYSCTL_DSLPCLKCFG_O_32 0x00000070 // 32.768 kHz +#define SYSCTL_DSLPCLKCFG_IOSC 0x00000001 // IOSC Clock Source +#define SYSCTL_DSLPCLKCFG_D_S 23 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_CLKVCLR register. +// +//***************************************************************************** +#define SYSCTL_CLKVCLR_VERCLR 0x00000001 // Clock Verification Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PIOSCCAL +// register. +// +//***************************************************************************** +#define SYSCTL_PIOSCCAL_UTEN 0x80000000 // Use User Trim Value +#define SYSCTL_PIOSCCAL_CAL 0x00000200 // Start Calibration +#define SYSCTL_PIOSCCAL_UPDATE 0x00000100 // Update Trim +#define SYSCTL_PIOSCCAL_UT_M 0x0000007F // User Trim Value +#define SYSCTL_PIOSCCAL_UT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PIOSCSTAT +// register. +// +//***************************************************************************** +#define SYSCTL_PIOSCSTAT_DT_M 0x007F0000 // Default Trim Value +#define SYSCTL_PIOSCSTAT_CR_M 0x00000300 // Calibration Result +#define SYSCTL_PIOSCSTAT_CRNONE 0x00000000 // Calibration has not been + // attempted +#define SYSCTL_PIOSCSTAT_CRPASS 0x00000100 // The last calibration operation + // completed to meet 1% accuracy +#define SYSCTL_PIOSCSTAT_CRFAIL 0x00000200 // The last calibration operation + // failed to meet 1% accuracy +#define SYSCTL_PIOSCSTAT_CT_M 0x0000007F // Calibration Trim Value +#define SYSCTL_PIOSCSTAT_DT_S 16 +#define SYSCTL_PIOSCSTAT_CT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_LDOARST register. +// +//***************************************************************************** +#define SYSCTL_LDOARST_LDOARST 0x00000001 // LDO Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_I2SMCLKCFG +// register. +// +//***************************************************************************** +#define SYSCTL_I2SMCLKCFG_RXEN 0x80000000 // RX Clock Enable +#define SYSCTL_I2SMCLKCFG_RXI_M 0x3FF00000 // RX Clock Integer Input +#define SYSCTL_I2SMCLKCFG_RXF_M 0x000F0000 // RX Clock Fractional Input +#define SYSCTL_I2SMCLKCFG_TXEN 0x00008000 // TX Clock Enable +#define SYSCTL_I2SMCLKCFG_TXI_M 0x00003FF0 // TX Clock Integer Input +#define SYSCTL_I2SMCLKCFG_TXF_M 0x0000000F // TX Clock Fractional Input +#define SYSCTL_I2SMCLKCFG_RXI_S 20 +#define SYSCTL_I2SMCLKCFG_RXF_S 16 +#define SYSCTL_I2SMCLKCFG_TXI_S 4 +#define SYSCTL_I2SMCLKCFG_TXF_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DC9 register. +// +//***************************************************************************** +#define SYSCTL_DC9_ADC1DC7 0x00800000 // ADC1 DC7 Present +#define SYSCTL_DC9_ADC1DC6 0x00400000 // ADC1 DC6 Present +#define SYSCTL_DC9_ADC1DC5 0x00200000 // ADC1 DC5 Present +#define SYSCTL_DC9_ADC1DC4 0x00100000 // ADC1 DC4 Present +#define SYSCTL_DC9_ADC1DC3 0x00080000 // ADC1 DC3 Present +#define SYSCTL_DC9_ADC1DC2 0x00040000 // ADC1 DC2 Present +#define SYSCTL_DC9_ADC1DC1 0x00020000 // ADC1 DC1 Present +#define SYSCTL_DC9_ADC1DC0 0x00010000 // ADC1 DC0 Present +#define SYSCTL_DC9_ADC0DC7 0x00000080 // ADC0 DC7 Present +#define SYSCTL_DC9_ADC0DC6 0x00000040 // ADC0 DC6 Present +#define SYSCTL_DC9_ADC0DC5 0x00000020 // ADC0 DC5 Present +#define SYSCTL_DC9_ADC0DC4 0x00000010 // ADC0 DC4 Present +#define SYSCTL_DC9_ADC0DC3 0x00000008 // ADC0 DC3 Present +#define SYSCTL_DC9_ADC0DC2 0x00000004 // ADC0 DC2 Present +#define SYSCTL_DC9_ADC0DC1 0x00000002 // ADC0 DC1 Present +#define SYSCTL_DC9_ADC0DC0 0x00000001 // ADC0 DC0 Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_NVMSTAT register. +// +//***************************************************************************** +#define SYSCTL_NVMSTAT_TPSW 0x00000010 // Third Party Software Present +#define SYSCTL_NVMSTAT_FWB 0x00000001 // 32 Word Flash Write Buffer + // Active + +//***************************************************************************** +// +// The following definitions are deprecated. +// +//***************************************************************************** +#ifndef DEPRECATED + +//***************************************************************************** +// +// The following are deprecated defines for the System Control register +// addresses. +// +//***************************************************************************** +#define SYSCTL_USER0 0x400FE1E0 // NV User Register 0 +#define SYSCTL_USER1 0x400FE1E4 // NV User Register 1 + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the SYSCTL_DID0 +// register. +// +//***************************************************************************** +#define SYSCTL_DID0_VER_MASK 0x70000000 // DID0 version mask +#define SYSCTL_DID0_CLASS_MASK 0x00FF0000 // Device Class +#define SYSCTL_DID0_MAJ_MASK 0x0000FF00 // Major revision mask +#define SYSCTL_DID0_MAJ_A 0x00000000 // Major revision A +#define SYSCTL_DID0_MAJ_B 0x00000100 // Major revision B +#define SYSCTL_DID0_MAJ_C 0x00000200 // Major revision C +#define SYSCTL_DID0_MIN_MASK 0x000000FF // Minor revision mask + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the SYSCTL_DID1 +// register. +// +//***************************************************************************** +#define SYSCTL_DID1_VER_MASK 0xF0000000 // Register version mask +#define SYSCTL_DID1_FAM_MASK 0x0F000000 // Family mask +#define SYSCTL_DID1_FAM_S 0x00000000 // Stellaris family +#define SYSCTL_DID1_PRTNO_MASK 0x00FF0000 // Part number mask +#define SYSCTL_DID1_PINCNT_MASK 0x0000E000 // Pin count +#define SYSCTL_DID1_TEMP_MASK 0x000000E0 // Temperature range mask +#define SYSCTL_DID1_PKG_MASK 0x00000018 // Package mask +#define SYSCTL_DID1_PKG_48QFP 0x00000008 // QFP package +#define SYSCTL_DID1_QUAL_MASK 0x00000003 // Qualification status mask +#define SYSCTL_DID1_PKG_28SOIC 0x00000000 // SOIC package +#define SYSCTL_DID1_PRTNO_SHIFT 16 + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the SYSCTL_DC0 +// register. +// +//***************************************************************************** +#define SYSCTL_DC0_SRAMSZ_MASK 0xFFFF0000 // SRAM size mask +#define SYSCTL_DC0_FLASHSZ_MASK 0x0000FFFF // Flash size mask + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the SYSCTL_DC1 +// register. +// +//***************************************************************************** +#define SYSCTL_DC1_ADC 0x00010000 // ADC Module Present +#define SYSCTL_DC1_SYSDIV_MASK 0x0000F000 // Minimum system divider mask +#define SYSCTL_DC1_ADCSPD_MASK 0x00000F00 // ADC speed mask +#define SYSCTL_DC1_WDOG 0x00000008 // Watchdog present +#define SYSCTL_DC1_WDT 0x00000008 // Watchdog Timer Present + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the SYSCTL_DC2 +// register. +// +//***************************************************************************** +#define SYSCTL_DC2_I2C 0x00001000 // I2C present +#define SYSCTL_DC2_QEI 0x00000100 // QEI present +#define SYSCTL_DC2_SSI 0x00000010 // SSI present + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the SYSCTL_DC3 +// register. +// +//***************************************************************************** +#define SYSCTL_DC3_ADC7 0x00800000 // ADC7 Pin Present +#define SYSCTL_DC3_ADC6 0x00400000 // ADC6 Pin Present +#define SYSCTL_DC3_ADC5 0x00200000 // ADC5 Pin Present +#define SYSCTL_DC3_ADC4 0x00100000 // ADC4 Pin Present +#define SYSCTL_DC3_ADC3 0x00080000 // ADC3 Pin Present +#define SYSCTL_DC3_ADC2 0x00040000 // ADC2 Pin Present +#define SYSCTL_DC3_ADC1 0x00020000 // ADC1 Pin Present +#define SYSCTL_DC3_ADC0 0x00010000 // ADC0 Pin Present +#define SYSCTL_DC3_MC_FAULT0 0x00008000 // MC0 fault pin present + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the +// SYSCTL_PBORCTL register. +// +//***************************************************************************** +#define SYSCTL_PBORCTL_BOR_MASK 0x0000FFFC // BOR wait timer +#define SYSCTL_PBORCTL_BOR_SH 2 + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the +// SYSCTL_LDOPCTL register. +// +//***************************************************************************** +#define SYSCTL_LDOPCTL_MASK 0x0000003F // Voltage adjust mask + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the SYSCTL_SRCR0 +// register. +// +//***************************************************************************** +#define SYSCTL_SRCR0_ADC 0x00010000 // ADC0 Reset Control +#define SYSCTL_SRCR0_WDT 0x00000008 // WDT Reset Control + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the SYSCTL_RESC +// register. +// +//***************************************************************************** +#define SYSCTL_RESC_WDOG 0x00000008 // Watchdog reset +#define SYSCTL_RESC_WDT 0x00000008 // Watchdog Timer Reset + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the SYSCTL_RCC +// register. +// +//***************************************************************************** +#define SYSCTL_RCC_SYSDIV_MASK 0x07800000 // System clock divider +#define SYSCTL_RCC_USE_SYSDIV 0x00400000 // Use sytem clock divider +#define SYSCTL_RCC_USE_PWMDIV 0x00100000 // Use PWM clock divider +#define SYSCTL_RCC_PWMDIV_MASK 0x000E0000 // PWM clock divider +#define SYSCTL_RCC_OE 0x00001000 // PLL output enable +#define SYSCTL_RCC_XTAL_3_68MHz 0x00000140 // Using a 3.6864 MHz crystal +#define SYSCTL_RCC_XTAL_4MHz 0x00000180 // Using a 4 MHz crystal +#define SYSCTL_RCC_XTAL_MASK 0x000003C0 // Crystal attached to main osc +#define SYSCTL_RCC_OSCSRC_MASK 0x00000030 // Oscillator input select +#define SYSCTL_RCC_SYSDIV_SHIFT 23 // Shift to the SYSDIV field +#define SYSCTL_RCC_PWMDIV_SHIFT 17 // Shift to the PWMDIV field +#define SYSCTL_RCC_XTAL_SHIFT 6 // Shift to the XTAL field +#define SYSCTL_RCC_OSCSRC_SHIFT 4 // Shift to the OSCSRC field + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the SYSCTL_PLLCFG +// register. +// +//***************************************************************************** +#define SYSCTL_PLLCFG_OD_MASK 0x0000C000 // Output divider +#define SYSCTL_PLLCFG_F_MASK 0x00003FE0 // PLL multiplier +#define SYSCTL_PLLCFG_R_MASK 0x0000001F // Input predivider +#define SYSCTL_PLLCFG_F_SHIFT 5 +#define SYSCTL_PLLCFG_R_SHIFT 0 + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the SYSCTL_RCC2 +// register. +// +//***************************************************************************** +#define SYSCTL_RCC2_USEFRACT 0x40000000 // Use fractional divider +#define SYSCTL_RCC2_SYSDIV2_MSK 0x1F800000 // System clock divider +#define SYSCTL_RCC2_FRACT 0x00400000 // Fractional divide +#define SYSCTL_RCC2_OSCSRC2_MSK 0x00000070 // Oscillator input select + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the SYSCTL_RCGC0 +// register. +// +//***************************************************************************** +#define SYSCTL_RCGC0_ADC 0x00010000 // ADC0 Clock Gating Control +#define SYSCTL_RCGC0_WDT 0x00000008 // WDT Clock Gating Control + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the SYSCTL_SCGC0 +// register. +// +//***************************************************************************** +#define SYSCTL_SCGC0_ADC 0x00010000 // ADC0 Clock Gating Control +#define SYSCTL_SCGC0_WDT 0x00000008 // WDT Clock Gating Control + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the SYSCTL_DCGC0 +// register. +// +//***************************************************************************** +#define SYSCTL_DCGC0_ADC 0x00010000 // ADC0 Clock Gating Control +#define SYSCTL_DCGC0_WDT 0x00000008 // WDT Clock Gating Control + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the +// SYSCTL_DSLPCLKCFG register. +// +//***************************************************************************** +#define SYSCTL_DSLPCLKCFG_D_MSK 0x1F800000 // Deep sleep system clock override +#define SYSCTL_DSLPCLKCFG_O_MSK 0x00000070 // Deep sleep oscillator override + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the +// SYSCTL_CLKVCLR register. +// +//***************************************************************************** +#define SYSCTL_CLKVCLR_CLR 0x00000001 // Clear clock verification fault + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the +// SYSCTL_LDOARST register. +// +//***************************************************************************** +#define SYSCTL_LDOARST_ARST 0x00000001 // Allow LDO to reset device + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the SYSCTL_SRCR0, +// SYSCTL_RCGC0, SYSCTL_SCGC0, and SYSCTL_DCGC0 registers. +// +//***************************************************************************** +#define SYSCTL_SET0_CAN2 0x04000000 // CAN 2 module +#define SYSCTL_SET0_CAN1 0x02000000 // CAN 1 module +#define SYSCTL_SET0_CAN0 0x01000000 // CAN 0 module +#define SYSCTL_SET0_PWM 0x00100000 // PWM module +#define SYSCTL_SET0_ADC 0x00010000 // ADC module +#define SYSCTL_SET0_ADCSPD_MASK 0x00000F00 // ADC speed mask +#define SYSCTL_SET0_ADCSPD_125K 0x00000000 // 125Ksps ADC +#define SYSCTL_SET0_ADCSPD_250K 0x00000100 // 250Ksps ADC +#define SYSCTL_SET0_ADCSPD_500K 0x00000200 // 500Ksps ADC +#define SYSCTL_SET0_ADCSPD_1M 0x00000300 // 1Msps ADC +#define SYSCTL_SET0_HIB 0x00000040 // Hibernation module +#define SYSCTL_SET0_WDOG 0x00000008 // Watchdog module + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the SYSCTL_SRCR1, +// SYSCTL_RCGC1, SYSCTL_SCGC1, and SYSCTL_DCGC1 registers. +// +//***************************************************************************** +#define SYSCTL_SET1_COMP2 0x04000000 // Analog comparator module 2 +#define SYSCTL_SET1_COMP1 0x02000000 // Analog comparator module 1 +#define SYSCTL_SET1_COMP0 0x01000000 // Analog comparator module 0 +#define SYSCTL_SET1_TIMER3 0x00080000 // Timer module 3 +#define SYSCTL_SET1_TIMER2 0x00040000 // Timer module 2 +#define SYSCTL_SET1_TIMER1 0x00020000 // Timer module 1 +#define SYSCTL_SET1_TIMER0 0x00010000 // Timer module 0 +#define SYSCTL_SET1_I2C1 0x00002000 // I2C module 1 +#define SYSCTL_SET1_I2C0 0x00001000 // I2C module 0 +#define SYSCTL_SET1_I2C 0x00001000 // I2C module +#define SYSCTL_SET1_QEI1 0x00000200 // QEI module 1 +#define SYSCTL_SET1_QEI 0x00000100 // QEI module +#define SYSCTL_SET1_QEI0 0x00000100 // QEI module 0 +#define SYSCTL_SET1_SSI1 0x00000020 // SSI module 1 +#define SYSCTL_SET1_SSI0 0x00000010 // SSI module 0 +#define SYSCTL_SET1_SSI 0x00000010 // SSI module +#define SYSCTL_SET1_UART2 0x00000004 // UART module 2 +#define SYSCTL_SET1_UART1 0x00000002 // UART module 1 +#define SYSCTL_SET1_UART0 0x00000001 // UART module 0 + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the SYSCTL_SRCR2, +// SYSCTL_RCGC2, SYSCTL_SCGC2, and SYSCTL_DCGC2 registers. +// +//***************************************************************************** +#define SYSCTL_SET2_ETH 0x50000000 // ETH module +#define SYSCTL_SET2_GPIOH 0x00000080 // GPIO H module +#define SYSCTL_SET2_GPIOG 0x00000040 // GPIO G module +#define SYSCTL_SET2_GPIOF 0x00000020 // GPIO F module +#define SYSCTL_SET2_GPIOE 0x00000010 // GPIO E module +#define SYSCTL_SET2_GPIOD 0x00000008 // GPIO D module +#define SYSCTL_SET2_GPIOC 0x00000004 // GPIO C module +#define SYSCTL_SET2_GPIOB 0x00000002 // GPIO B module +#define SYSCTL_SET2_GPIOA 0x00000001 // GIPO A module + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the SYSCTL_RIS, +// SYSCTL_IMC, and SYSCTL_IMS registers. +// +//***************************************************************************** +#define SYSCTL_INT_PLL_LOCK 0x00000040 // PLL lock interrupt +#define SYSCTL_INT_CUR_LIMIT 0x00000020 // Current limit interrupt +#define SYSCTL_INT_IOSC_FAIL 0x00000010 // Internal oscillator failure int +#define SYSCTL_INT_MOSC_FAIL 0x00000008 // Main oscillator failure int +#define SYSCTL_INT_POR 0x00000004 // Power on reset interrupt +#define SYSCTL_INT_BOR 0x00000002 // Brown out interrupt +#define SYSCTL_INT_PLL_FAIL 0x00000001 // PLL failure interrupt + +#endif + +#endif // __HW_SYSCTL_H__ diff --git a/bsp/lm3s_9b9x/Libraries/inc/hw_timer.h b/bsp/lm3s_9b9x/Libraries/inc/hw_timer.h new file mode 100644 index 0000000000000000000000000000000000000000..3a75bc9c65a6608cd1636faba7df52782919aa2b --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/inc/hw_timer.h @@ -0,0 +1,474 @@ +//***************************************************************************** +// +// hw_timer.h - Defines and macros used when accessing the timer. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_TIMER_H__ +#define __HW_TIMER_H__ + +//***************************************************************************** +// +// The following are defines for the Timer register offsets. +// +//***************************************************************************** +#define TIMER_O_CFG 0x00000000 // GPTM Configuration +#define TIMER_O_TAMR 0x00000004 // GPTM Timer A Mode +#define TIMER_O_TBMR 0x00000008 // GPTM Timer B Mode +#define TIMER_O_CTL 0x0000000C // GPTM Control +#define TIMER_O_IMR 0x00000018 // GPTM Interrupt Mask +#define TIMER_O_RIS 0x0000001C // GPTM Raw Interrupt Status +#define TIMER_O_MIS 0x00000020 // GPTM Masked Interrupt Status +#define TIMER_O_ICR 0x00000024 // GPTM Interrupt Clear +#define TIMER_O_TAILR 0x00000028 // GPTM Timer A Interval Load +#define TIMER_O_TBILR 0x0000002C // GPTM Timer B Interval Load +#define TIMER_O_TAMATCHR 0x00000030 // GPTM Timer A Match +#define TIMER_O_TBMATCHR 0x00000034 // GPTM Timer B Match +#define TIMER_O_TAPR 0x00000038 // GPTM Timer A Prescale +#define TIMER_O_TBPR 0x0000003C // GPTM Timer B Prescale +#define TIMER_O_TAPMR 0x00000040 // GPTM TimerA Prescale Match +#define TIMER_O_TBPMR 0x00000044 // GPTM TimerB Prescale Match +#define TIMER_O_TAR 0x00000048 // GPTM Timer A +#define TIMER_O_TBR 0x0000004C // GPTM Timer B +#define TIMER_O_TAV 0x00000050 // GPTM Timer A Value +#define TIMER_O_TBV 0x00000054 // GPTM Timer B Value + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_CFG register. +// +//***************************************************************************** +#define TIMER_CFG_M 0x00000007 // GPTM Configuration +#define TIMER_CFG_32_BIT_TIMER 0x00000000 // 32-bit timer configuration +#define TIMER_CFG_32_BIT_RTC 0x00000001 // 32-bit real-time clock (RTC) + // counter configuration +#define TIMER_CFG_16_BIT 0x00000004 // 16-bit timer configuration. The + // function is controlled by bits + // 1:0 of GPTMTAMR and GPTMTBMR + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TAMR register. +// +//***************************************************************************** +#define TIMER_TAMR_TASNAPS 0x00000080 // GPTM Timer A Snap-Shot Mode +#define TIMER_TAMR_TAWOT 0x00000040 // GPTM Timer A Wait-on-Trigger +#define TIMER_TAMR_TAMIE 0x00000020 // GPTM Timer A Match Interrupt + // Enable +#define TIMER_TAMR_TACDIR 0x00000010 // GPTM Timer A Count Direction +#define TIMER_TAMR_TAAMS 0x00000008 // GPTM Timer A Alternate Mode + // Select +#define TIMER_TAMR_TACMR 0x00000004 // GPTM Timer A Capture Mode +#define TIMER_TAMR_TAMR_M 0x00000003 // GPTM Timer A Mode +#define TIMER_TAMR_TAMR_1_SHOT 0x00000001 // One-Shot Timer mode +#define TIMER_TAMR_TAMR_PERIOD 0x00000002 // Periodic Timer mode +#define TIMER_TAMR_TAMR_CAP 0x00000003 // Capture mode + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TBMR register. +// +//***************************************************************************** +#define TIMER_TBMR_TBSNAPS 0x00000080 // GPTM Timer B Snap-Shot Mode +#define TIMER_TBMR_TBWOT 0x00000040 // GPTM Timer B Wait-on-Trigger +#define TIMER_TBMR_TBMIE 0x00000020 // GPTM Timer B Match Interrupt + // Enable +#define TIMER_TBMR_TBCDIR 0x00000010 // GPTM Timer B Count Direction +#define TIMER_TBMR_TBAMS 0x00000008 // GPTM Timer B Alternate Mode + // Select +#define TIMER_TBMR_TBCMR 0x00000004 // GPTM Timer B Capture Mode +#define TIMER_TBMR_TBMR_M 0x00000003 // GPTM Timer B Mode +#define TIMER_TBMR_TBMR_1_SHOT 0x00000001 // One-Shot Timer mode +#define TIMER_TBMR_TBMR_PERIOD 0x00000002 // Periodic Timer mode +#define TIMER_TBMR_TBMR_CAP 0x00000003 // Capture mode + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_CTL register. +// +//***************************************************************************** +#define TIMER_CTL_TBPWML 0x00004000 // GPTM Timer B PWM Output Level +#define TIMER_CTL_TBOTE 0x00002000 // GPTM Timer B Output Trigger + // Enable +#define TIMER_CTL_TBEVENT_M 0x00000C00 // GPTM Timer B Event Mode +#define TIMER_CTL_TBEVENT_POS 0x00000000 // Positive edge +#define TIMER_CTL_TBEVENT_NEG 0x00000400 // Negative edge +#define TIMER_CTL_TBEVENT_BOTH 0x00000C00 // Both edges +#define TIMER_CTL_TBSTALL 0x00000200 // GPTM Timer B Stall Enable +#define TIMER_CTL_TBEN 0x00000100 // GPTM Timer B Enable +#define TIMER_CTL_TAPWML 0x00000040 // GPTM Timer A PWM Output Level +#define TIMER_CTL_TAOTE 0x00000020 // GPTM Timer A Output Trigger + // Enable +#define TIMER_CTL_RTCEN 0x00000010 // GPTM RTC Enable +#define TIMER_CTL_TAEVENT_M 0x0000000C // GPTM Timer A Event Mode +#define TIMER_CTL_TAEVENT_POS 0x00000000 // Positive edge +#define TIMER_CTL_TAEVENT_NEG 0x00000004 // Negative edge +#define TIMER_CTL_TAEVENT_BOTH 0x0000000C // Both edges +#define TIMER_CTL_TASTALL 0x00000002 // GPTM Timer A Stall Enable +#define TIMER_CTL_TAEN 0x00000001 // GPTM Timer A Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_IMR register. +// +//***************************************************************************** +#define TIMER_IMR_TBMIM 0x00000800 // GPTM Timer B Mode Match + // Interrupt Mask +#define TIMER_IMR_CBEIM 0x00000400 // GPTM Capture B Event Interrupt + // Mask +#define TIMER_IMR_CBMIM 0x00000200 // GPTM Capture B Match Interrupt + // Mask +#define TIMER_IMR_TBTOIM 0x00000100 // GPTM Timer B Time-Out Interrupt + // Mask +#define TIMER_IMR_TAMIM 0x00000010 // GPTM Timer A Mode Match + // Interrupt Mask +#define TIMER_IMR_RTCIM 0x00000008 // GPTM RTC Interrupt Mask +#define TIMER_IMR_CAEIM 0x00000004 // GPTM Capture A Event Interrupt + // Mask +#define TIMER_IMR_CAMIM 0x00000002 // GPTM Capture A Match Interrupt + // Mask +#define TIMER_IMR_TATOIM 0x00000001 // GPTM Timer A Time-Out Interrupt + // Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_RIS register. +// +//***************************************************************************** +#define TIMER_RIS_TBMRIS 0x00000800 // GPTM Timer B Mode Match Raw + // Interrupt +#define TIMER_RIS_CBERIS 0x00000400 // GPTM Capture B Event Raw + // Interrupt +#define TIMER_RIS_CBMRIS 0x00000200 // GPTM Capture B Match Raw + // Interrupt +#define TIMER_RIS_TBTORIS 0x00000100 // GPTM Timer B Time-Out Raw + // Interrupt +#define TIMER_RIS_TAMRIS 0x00000010 // GPTM Timer A Mode Match Raw + // Interrupt +#define TIMER_RIS_RTCRIS 0x00000008 // GPTM RTC Raw Interrupt +#define TIMER_RIS_CAERIS 0x00000004 // GPTM Capture A Event Raw + // Interrupt +#define TIMER_RIS_CAMRIS 0x00000002 // GPTM Capture A Match Raw + // Interrupt +#define TIMER_RIS_TATORIS 0x00000001 // GPTM Timer A Time-Out Raw + // Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_MIS register. +// +//***************************************************************************** +#define TIMER_MIS_TBMMIS 0x00000800 // GPTM Timer B Mode Match Masked + // Interrupt +#define TIMER_MIS_CBEMIS 0x00000400 // GPTM Capture B Event Masked + // Interrupt +#define TIMER_MIS_CBMMIS 0x00000200 // GPTM Capture B Match Masked + // Interrupt +#define TIMER_MIS_TBTOMIS 0x00000100 // GPTM Timer B Time-Out Masked + // Interrupt +#define TIMER_MIS_TAMMIS 0x00000010 // GPTM Timer A Mode Match Masked + // Interrupt +#define TIMER_MIS_RTCMIS 0x00000008 // GPTM RTC Masked Interrupt +#define TIMER_MIS_CAEMIS 0x00000004 // GPTM Capture A Event Masked + // Interrupt +#define TIMER_MIS_CAMMIS 0x00000002 // GPTM Capture A Match Masked + // Interrupt +#define TIMER_MIS_TATOMIS 0x00000001 // GPTM Timer A Time-Out Masked + // Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_ICR register. +// +//***************************************************************************** +#define TIMER_ICR_TBMCINT 0x00000800 // GPTM Timer B Mode Match + // Interrupt Clear +#define TIMER_ICR_CBECINT 0x00000400 // GPTM Capture B Event Interrupt + // Clear +#define TIMER_ICR_CBMCINT 0x00000200 // GPTM Capture B Match Interrupt + // Clear +#define TIMER_ICR_TBTOCINT 0x00000100 // GPTM Timer B Time-Out Interrupt + // Clear +#define TIMER_ICR_TAMCINT 0x00000010 // GPTM Timer A Mode Match + // Interrupt Clear +#define TIMER_ICR_RTCCINT 0x00000008 // GPTM RTC Interrupt Clear +#define TIMER_ICR_CAECINT 0x00000004 // GPTM Capture A Event Interrupt + // Clear +#define TIMER_ICR_CAMCINT 0x00000002 // GPTM Capture A Match Interrupt + // Clear +#define TIMER_ICR_TATOCINT 0x00000001 // GPTM Timer A Time-Out Raw + // Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TAILR register. +// +//***************************************************************************** +#define TIMER_TAILR_TAILRH_M 0xFFFF0000 // GPTM Timer A Interval Load + // Register High +#define TIMER_TAILR_TAILRL_M 0x0000FFFF // GPTM Timer A Interval Load + // Register Low +#define TIMER_TAILR_TAILRH_S 16 +#define TIMER_TAILR_TAILRL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TBILR register. +// +//***************************************************************************** +#define TIMER_TBILR_TBILRL_M 0x0000FFFF // GPTM Timer B Interval Load + // Register +#define TIMER_TBILR_TBILRL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TAMATCHR +// register. +// +//***************************************************************************** +#define TIMER_TAMATCHR_TAMRH_M 0xFFFF0000 // GPTM Timer A Match Register High +#define TIMER_TAMATCHR_TAMRL_M 0x0000FFFF // GPTM Timer A Match Register Low +#define TIMER_TAMATCHR_TAMRH_S 16 +#define TIMER_TAMATCHR_TAMRL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TBMATCHR +// register. +// +//***************************************************************************** +#define TIMER_TBMATCHR_TBMRL_M 0x0000FFFF // GPTM Timer B Match Register Low +#define TIMER_TBMATCHR_TBMRL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TAPR register. +// +//***************************************************************************** +#define TIMER_TAPR_TAPSR_M 0x000000FF // GPTM Timer A Prescale +#define TIMER_TAPR_TAPSR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TBPR register. +// +//***************************************************************************** +#define TIMER_TBPR_TBPSR_M 0x000000FF // GPTM Timer B Prescale +#define TIMER_TBPR_TBPSR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TAPMR register. +// +//***************************************************************************** +#define TIMER_TAPMR_TAPSMR_M 0x000000FF // GPTM TimerA Prescale Match +#define TIMER_TAPMR_TAPSMR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TBPMR register. +// +//***************************************************************************** +#define TIMER_TBPMR_TBPSMR_M 0x000000FF // GPTM TimerB Prescale Match +#define TIMER_TBPMR_TBPSMR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TAR register. +// +//***************************************************************************** +#define TIMER_TAR_TARH_M 0xFFFF0000 // GPTM Timer A Register High +#define TIMER_TAR_TARL_M 0x0000FFFF // GPTM Timer A Register Low +#define TIMER_TAR_TARH_S 16 +#define TIMER_TAR_TARL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TBR register. +// +//***************************************************************************** +#define TIMER_TBR_TBRL_M 0x00FFFFFF // GPTM Timer B +#define TIMER_TBR_TBRL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TAV register. +// +//***************************************************************************** +#define TIMER_TAV_TAVH_M 0xFFFF0000 // GPTM Timer A Value High +#define TIMER_TAV_TAVL_M 0x0000FFFF // GPTM Timer A Register Low +#define TIMER_TAV_TAVH_S 16 +#define TIMER_TAV_TAVL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TBV register. +// +//***************************************************************************** +#define TIMER_TBV_TBVL_M 0x0000FFFF // GPTM Timer B Register +#define TIMER_TBV_TBVL_S 0 + +//***************************************************************************** +// +// The following definitions are deprecated. +// +//***************************************************************************** +#ifndef DEPRECATED + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the TIMER_O_CFG +// register. +// +//***************************************************************************** +#define TIMER_CFG_CFG_MSK 0x00000007 // Configuration options mask + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the TIMER_O_CTL +// register. +// +//***************************************************************************** +#define TIMER_CTL_TBEVENT_MSK 0x00000C00 // TimerB event mode mask +#define TIMER_CTL_TAEVENT_MSK 0x0000000C // TimerA event mode mask + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the TIMER_O_RIS +// register. +// +//***************************************************************************** +#define TIMER_RIS_CBEMIS 0x00000400 // CaptureB event masked int status +#define TIMER_RIS_CBMMIS 0x00000200 // CaptureB match masked int status +#define TIMER_RIS_TBTOMIS 0x00000100 // TimerB time out masked int stat +#define TIMER_RIS_RTCMIS 0x00000008 // RTC masked int status +#define TIMER_RIS_CAEMIS 0x00000004 // CaptureA event masked int status +#define TIMER_RIS_CAMMIS 0x00000002 // CaptureA match masked int status +#define TIMER_RIS_TATOMIS 0x00000001 // TimerA time out masked int stat + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the TIMER_O_TAILR +// register. +// +//***************************************************************************** +#define TIMER_TAILR_TAILRH 0xFFFF0000 // TimerB load val in 32 bit mode +#define TIMER_TAILR_TAILRL 0x0000FFFF // TimerA interval load value + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the TIMER_O_TBILR +// register. +// +//***************************************************************************** +#define TIMER_TBILR_TBILRL 0x0000FFFF // TimerB interval load value + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the +// TIMER_O_TAMATCHR register. +// +//***************************************************************************** +#define TIMER_TAMATCHR_TAMRH 0xFFFF0000 // TimerB match val in 32 bit mode +#define TIMER_TAMATCHR_TAMRL 0x0000FFFF // TimerA match value + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the +// TIMER_O_TBMATCHR register. +// +//***************************************************************************** +#define TIMER_TBMATCHR_TBMRL 0x0000FFFF // TimerB match load value + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the TIMER_O_TAR +// register. +// +//***************************************************************************** +#define TIMER_TAR_TARH 0xFFFF0000 // TimerB val in 32 bit mode +#define TIMER_TAR_TARL 0x0000FFFF // TimerA value + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the TIMER_O_TBR +// register. +// +//***************************************************************************** +#define TIMER_TBR_TBRL 0x0000FFFF // TimerB value + +//***************************************************************************** +// +// The following are deprecated defines for the reset values of the timer +// registers. +// +//***************************************************************************** +#define TIMER_RV_TAILR 0xFFFFFFFF // TimerA interval load reg RV +#define TIMER_RV_TAR 0xFFFFFFFF // TimerA register RV +#define TIMER_RV_TAMATCHR 0xFFFFFFFF // TimerA match register RV +#define TIMER_RV_TBILR 0x0000FFFF // TimerB interval load reg RV +#define TIMER_RV_TBMATCHR 0x0000FFFF // TimerB match register RV +#define TIMER_RV_TBR 0x0000FFFF // TimerB register RV +#define TIMER_RV_TAPR 0x00000000 // TimerA prescale register RV +#define TIMER_RV_CFG 0x00000000 // Configuration register RV +#define TIMER_RV_TBPMR 0x00000000 // TimerB prescale match regi RV +#define TIMER_RV_TAPMR 0x00000000 // TimerA prescale match reg RV +#define TIMER_RV_CTL 0x00000000 // Control register RV +#define TIMER_RV_ICR 0x00000000 // Interrupt clear register RV +#define TIMER_RV_TBMR 0x00000000 // TimerB mode register RV +#define TIMER_RV_MIS 0x00000000 // Masked interrupt status reg RV +#define TIMER_RV_RIS 0x00000000 // Interrupt status register RV +#define TIMER_RV_TBPR 0x00000000 // TimerB prescale register RV +#define TIMER_RV_IMR 0x00000000 // Interrupt mask register RV +#define TIMER_RV_TAMR 0x00000000 // TimerA mode register RV + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the TIMER_TnMR +// register. +// +//***************************************************************************** +#define TIMER_TNMR_TNAMS 0x00000008 // Alternate mode select +#define TIMER_TNMR_TNCMR 0x00000004 // Capture mode - count or time +#define TIMER_TNMR_TNTMR_MSK 0x00000003 // Timer mode mask +#define TIMER_TNMR_TNTMR_1_SHOT 0x00000001 // Mode - one shot +#define TIMER_TNMR_TNTMR_PERIOD 0x00000002 // Mode - periodic +#define TIMER_TNMR_TNTMR_CAP 0x00000003 // Mode - capture + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the TIMER_TnPR +// register. +// +//***************************************************************************** +#define TIMER_TNPR_TNPSR 0x000000FF // TimerN prescale value + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the TIMER_TnPMR +// register. +// +//***************************************************************************** +#define TIMER_TNPMR_TNPSMR 0x000000FF // TimerN prescale match value + +#endif + +#endif // __HW_TIMER_H__ diff --git a/bsp/lm3s_9b9x/Libraries/inc/hw_types.h b/bsp/lm3s_9b9x/Libraries/inc/hw_types.h new file mode 100644 index 0000000000000000000000000000000000000000..d4e449777ff34a0a6f7e517e68833964d978225a --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/inc/hw_types.h @@ -0,0 +1,179 @@ +//***************************************************************************** +// +// hw_types.h - Common types and macros. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_TYPES_H__ +#define __HW_TYPES_H__ + +//***************************************************************************** +// +// Define a boolean type, and values for true and false. +// +//***************************************************************************** +typedef unsigned char tBoolean; + +#ifndef true +#define true 1 +#endif + +#ifndef false +#define false 0 +#endif + +//***************************************************************************** +// +// Macros for hardware access, both direct and via the bit-band region. +// +//***************************************************************************** +#define HWREG(x) \ + (*((volatile unsigned long *)(x))) +#define HWREGH(x) \ + (*((volatile unsigned short *)(x))) +#define HWREGB(x) \ + (*((volatile unsigned char *)(x))) +#define HWREGBITW(x, b) \ + HWREG(((unsigned long)(x) & 0xF0000000) | 0x02000000 | \ + (((unsigned long)(x) & 0x000FFFFF) << 5) | ((b) << 2)) +#define HWREGBITH(x, b) \ + HWREGH(((unsigned long)(x) & 0xF0000000) | 0x02000000 | \ + (((unsigned long)(x) & 0x000FFFFF) << 5) | ((b) << 2)) +#define HWREGBITB(x, b) \ + HWREGB(((unsigned long)(x) & 0xF0000000) | 0x02000000 | \ + (((unsigned long)(x) & 0x000FFFFF) << 5) | ((b) << 2)) + +//***************************************************************************** +// +// Helper Macros for determining silicon revisions, etc. +// +// These macros will be used by Driverlib at "run-time" to create necessary +// conditional code blocks that will allow a single version of the Driverlib +// "binary" code to support multiple(all) Stellaris silicon revisions. +// +// It is expected that these macros will be used inside of a standard 'C' +// conditional block of code, e.g. +// +// if(CLASS_IS_SANDSTORM) +// { +// do some Sandstorm-class specific code here. +// } +// +// By default, these macros will be defined as run-time checks of the +// appropriate register(s) to allow creation of run-time conditional code +// blocks for a common DriverLib across the entire Stellaris family. +// +// However, if code-space optimization is required, these macros can be "hard- +// coded" for a specific version of Stellaris silicon. Many compilers will +// then detect the "hard-coded" conditionals, and appropriately optimize the +// code blocks, eliminating any "unreachable" code. This would result in +// a smaller Driverlib, thus producing a smaller final application size, but +// at the cost of limiting the Driverlib binary to a specific Stellaris +// silicon revision. +// +//***************************************************************************** +#ifndef CLASS_IS_SANDSTORM +#define CLASS_IS_SANDSTORM \ + (((HWREG(SYSCTL_DID0) & SYSCTL_DID0_VER_M) == SYSCTL_DID0_VER_0) || \ + ((HWREG(SYSCTL_DID0) & (SYSCTL_DID0_VER_M | SYSCTL_DID0_CLASS_M)) == \ + (SYSCTL_DID0_VER_1 | SYSCTL_DID0_CLASS_SANDSTORM))) +#endif + +#ifndef CLASS_IS_FURY +#define CLASS_IS_FURY \ + ((HWREG(SYSCTL_DID0) & (SYSCTL_DID0_VER_M | SYSCTL_DID0_CLASS_M)) == \ + (SYSCTL_DID0_VER_1 | SYSCTL_DID0_CLASS_FURY)) +#endif + +#ifndef CLASS_IS_DUSTDEVIL +#define CLASS_IS_DUSTDEVIL \ + ((HWREG(SYSCTL_DID0) & (SYSCTL_DID0_VER_M | SYSCTL_DID0_CLASS_M)) == \ + (SYSCTL_DID0_VER_1 | SYSCTL_DID0_CLASS_DUSTDEVIL)) +#endif + +#ifndef CLASS_IS_TEMPEST +#define CLASS_IS_TEMPEST \ + ((HWREG(SYSCTL_DID0) & (SYSCTL_DID0_VER_M | SYSCTL_DID0_CLASS_M)) == \ + (SYSCTL_DID0_VER_1 | SYSCTL_DID0_CLASS_TEMPEST)) +#endif + +#ifndef REVISION_IS_A0 +#define REVISION_IS_A0 \ + ((HWREG(SYSCTL_DID0) & (SYSCTL_DID0_MAJ_M | SYSCTL_DID0_MIN_M)) == \ + (SYSCTL_DID0_MAJ_REVA | SYSCTL_DID0_MIN_0)) +#endif + +#ifndef REVISION_IS_A1 +#define REVISION_IS_A1 \ + ((HWREG(SYSCTL_DID0) & (SYSCTL_DID0_MAJ_M | SYSCTL_DID0_MIN_M)) == \ + (SYSCTL_DID0_MAJ_REVA | SYSCTL_DID0_MIN_0)) +#endif + +#ifndef REVISION_IS_A2 +#define REVISION_IS_A2 \ + ((HWREG(SYSCTL_DID0) & (SYSCTL_DID0_MAJ_M | SYSCTL_DID0_MIN_M)) == \ + (SYSCTL_DID0_MAJ_REVA | SYSCTL_DID0_MIN_2)) +#endif + +#ifndef REVISION_IS_B0 +#define REVISION_IS_B0 \ + ((HWREG(SYSCTL_DID0) & (SYSCTL_DID0_MAJ_M | SYSCTL_DID0_MIN_M)) == \ + (SYSCTL_DID0_MAJ_REVB | SYSCTL_DID0_MIN_0)) +#endif + +#ifndef REVISION_IS_B1 +#define REVISION_IS_B1 \ + ((HWREG(SYSCTL_DID0) & (SYSCTL_DID0_MAJ_M | SYSCTL_DID0_MIN_M)) == \ + (SYSCTL_DID0_MAJ_REVB | SYSCTL_DID0_MIN_1)) +#endif + +#ifndef REVISION_IS_C0 +#define REVISION_IS_C0 \ + ((HWREG(SYSCTL_DID0) & (SYSCTL_DID0_MAJ_M | SYSCTL_DID0_MIN_M)) == \ + (SYSCTL_DID0_MAJ_REVC | SYSCTL_DID0_MIN_0)) +#endif + +#ifndef REVISION_IS_C1 +#define REVISION_IS_C1 \ + ((HWREG(SYSCTL_DID0) & (SYSCTL_DID0_MAJ_M | SYSCTL_DID0_MIN_M)) == \ + (SYSCTL_DID0_MAJ_REVC | SYSCTL_DID0_MIN_1)) +#endif + +#ifndef REVISION_IS_C2 +#define REVISION_IS_C2 \ + ((HWREG(SYSCTL_DID0) & (SYSCTL_DID0_MAJ_M | SYSCTL_DID0_MIN_M)) == \ + (SYSCTL_DID0_MAJ_REVC | SYSCTL_DID0_MIN_2)) +#endif + +//***************************************************************************** +// +// Deprecated silicon class and revision detection macros. +// +//***************************************************************************** +#ifndef DEPRECATED +#define DEVICE_IS_SANDSTORM CLASS_IS_SANDSTORM +#define DEVICE_IS_FURY CLASS_IS_FURY +#define DEVICE_IS_REVA2 REVISION_IS_A2 +#define DEVICE_IS_REVC1 REVISION_IS_C1 +#define DEVICE_IS_REVC2 REVISION_IS_C2 +#endif + +#endif // __HW_TYPES_H__ diff --git a/bsp/lm3s_9b9x/Libraries/inc/hw_uart.h b/bsp/lm3s_9b9x/Libraries/inc/hw_uart.h new file mode 100644 index 0000000000000000000000000000000000000000..8a7832a47d22124a4dafb48849f92cf97e49e0c1 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/inc/hw_uart.h @@ -0,0 +1,458 @@ +//***************************************************************************** +// +// hw_uart.h - Macros and defines used when accessing the UART hardware. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_UART_H__ +#define __HW_UART_H__ + +//***************************************************************************** +// +// The following are defines for the UART register offsets. +// +//***************************************************************************** +#define UART_O_DR 0x00000000 // UART Data +#define UART_O_RSR 0x00000004 // UART Receive Status/Error Clear +#define UART_O_ECR 0x00000004 // UART Receive Status/Error Clear +#define UART_O_FR 0x00000018 // UART Flag +#define UART_O_ILPR 0x00000020 // UART IrDA Low-Power Register +#define UART_O_IBRD 0x00000024 // UART Integer Baud-Rate Divisor +#define UART_O_FBRD 0x00000028 // UART Fractional Baud-Rate + // Divisor +#define UART_O_LCRH 0x0000002C // UART Line Control +#define UART_O_CTL 0x00000030 // UART Control +#define UART_O_IFLS 0x00000034 // UART Interrupt FIFO Level Select +#define UART_O_IM 0x00000038 // UART Interrupt Mask +#define UART_O_RIS 0x0000003C // UART Raw Interrupt Status +#define UART_O_MIS 0x00000040 // UART Masked Interrupt Status +#define UART_O_ICR 0x00000044 // UART Interrupt Clear +#define UART_O_DMACTL 0x00000048 // UART DMA Control +#define UART_O_LCTL 0x00000090 // UART LIN Control +#define UART_O_LSS 0x00000094 // UART LIN Snap Shot +#define UART_O_LTIM 0x00000098 // UART LIN Timer + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_DR register. +// +//***************************************************************************** +#define UART_DR_OE 0x00000800 // UART Overrun Error +#define UART_DR_BE 0x00000400 // UART Break Error +#define UART_DR_PE 0x00000200 // UART Parity Error +#define UART_DR_FE 0x00000100 // UART Framing Error +#define UART_DR_DATA_M 0x000000FF // Data Transmitted or Received +#define UART_DR_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_RSR register. +// +//***************************************************************************** +#define UART_RSR_OE 0x00000008 // UART Overrun Error +#define UART_RSR_BE 0x00000004 // UART Break Error +#define UART_RSR_PE 0x00000002 // UART Parity Error +#define UART_RSR_FE 0x00000001 // UART Framing Error + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_ECR register. +// +//***************************************************************************** +#define UART_ECR_DATA_M 0x000000FF // Error Clear +#define UART_ECR_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_FR register. +// +//***************************************************************************** +#define UART_FR_RI 0x00000100 // Ring Indicator +#define UART_FR_TXFE 0x00000080 // UART Transmit FIFO Empty +#define UART_FR_RXFF 0x00000040 // UART Receive FIFO Full +#define UART_FR_TXFF 0x00000020 // UART Transmit FIFO Full +#define UART_FR_RXFE 0x00000010 // UART Receive FIFO Empty +#define UART_FR_BUSY 0x00000008 // UART Busy +#define UART_FR_DCD 0x00000004 // Data Carrier Detect +#define UART_FR_DSR 0x00000002 // Data Set Ready +#define UART_FR_CTS 0x00000001 // Clear To Send + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_ILPR register. +// +//***************************************************************************** +#define UART_ILPR_ILPDVSR_M 0x000000FF // IrDA Low-Power Divisor +#define UART_ILPR_ILPDVSR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_IBRD register. +// +//***************************************************************************** +#define UART_IBRD_DIVINT_M 0x0000FFFF // Integer Baud-Rate Divisor +#define UART_IBRD_DIVINT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_FBRD register. +// +//***************************************************************************** +#define UART_FBRD_DIVFRAC_M 0x0000003F // Fractional Baud-Rate Divisor +#define UART_FBRD_DIVFRAC_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_LCRH register. +// +//***************************************************************************** +#define UART_LCRH_SPS 0x00000080 // UART Stick Parity Select +#define UART_LCRH_WLEN_M 0x00000060 // UART Word Length +#define UART_LCRH_WLEN_5 0x00000000 // 5 bits (default) +#define UART_LCRH_WLEN_6 0x00000020 // 6 bits +#define UART_LCRH_WLEN_7 0x00000040 // 7 bits +#define UART_LCRH_WLEN_8 0x00000060 // 8 bits +#define UART_LCRH_FEN 0x00000010 // UART Enable FIFOs +#define UART_LCRH_STP2 0x00000008 // UART Two Stop Bits Select +#define UART_LCRH_EPS 0x00000004 // UART Even Parity Select +#define UART_LCRH_PEN 0x00000002 // UART Parity Enable +#define UART_LCRH_BRK 0x00000001 // UART Send Break + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_CTL register. +// +//***************************************************************************** +#define UART_CTL_CTSEN 0x00008000 // Enable Clear To Send +#define UART_CTL_RTSEN 0x00004000 // Enable Request to Send +#define UART_CTL_RTS 0x00000800 // Request to Send +#define UART_CTL_DTR 0x00000400 // Data Terminal Ready +#define UART_CTL_RXE 0x00000200 // UART Receive Enable +#define UART_CTL_TXE 0x00000100 // UART Transmit Enable +#define UART_CTL_LBE 0x00000080 // UART Loop Back Enable +#define UART_CTL_LIN 0x00000040 // LIN Mode Enable +#define UART_CTL_HSE 0x00000020 // High-Speed Enable +#define UART_CTL_EOT 0x00000010 // End of Transmission +#define UART_CTL_SMART 0x00000008 // ISO 7816 Smart Card Support +#define UART_CTL_SIRLP 0x00000004 // UART SIR Low-Power Mode +#define UART_CTL_SIREN 0x00000002 // UART SIR Enable +#define UART_CTL_UARTEN 0x00000001 // UART Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_IFLS register. +// +//***************************************************************************** +#define UART_IFLS_RX_M 0x00000038 // UART Receive Interrupt FIFO + // Level Select +#define UART_IFLS_RX1_8 0x00000000 // RX FIFO >= 1/8 full +#define UART_IFLS_RX2_8 0x00000008 // RX FIFO >= 1/4 full +#define UART_IFLS_RX4_8 0x00000010 // RX FIFO >= 1/2 full (default) +#define UART_IFLS_RX6_8 0x00000018 // RX FIFO >= 3/4 full +#define UART_IFLS_RX7_8 0x00000020 // RX FIFO >= 7/8 full +#define UART_IFLS_TX_M 0x00000007 // UART Transmit Interrupt FIFO + // Level Select +#define UART_IFLS_TX1_8 0x00000000 // TX FIFO <= 1/8 full +#define UART_IFLS_TX2_8 0x00000001 // TX FIFO <= 1/4 full +#define UART_IFLS_TX4_8 0x00000002 // TX FIFO <= 1/2 full (default) +#define UART_IFLS_TX6_8 0x00000003 // TX FIFO <= 3/4 full +#define UART_IFLS_TX7_8 0x00000004 // TX FIFO <= 7/8 full + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_IM register. +// +//***************************************************************************** +#define UART_IM_LME5IM 0x00008000 // LIN Mode Edge 5 Interrupt Mask +#define UART_IM_LME1IM 0x00004000 // LIN Mode Edge 1 Interrupt Mask +#define UART_IM_LMSBIM 0x00002000 // LIN Mode Sync Break Interrupt + // Mask +#define UART_IM_OEIM 0x00000400 // UART Overrun Error Interrupt + // Mask +#define UART_IM_BEIM 0x00000200 // UART Break Error Interrupt Mask +#define UART_IM_PEIM 0x00000100 // UART Parity Error Interrupt Mask +#define UART_IM_FEIM 0x00000080 // UART Framing Error Interrupt + // Mask +#define UART_IM_RTIM 0x00000040 // UART Receive Time-Out Interrupt + // Mask +#define UART_IM_TXIM 0x00000020 // UART Transmit Interrupt Mask +#define UART_IM_RXIM 0x00000010 // UART Receive Interrupt Mask +#define UART_IM_DSRMIM 0x00000008 // UART Data Set Ready Modem + // Interrupt Mask +#define UART_IM_DCDMIM 0x00000004 // UART Data Carrier Detect Modem + // Interrupt Mask +#define UART_IM_CTSMIM 0x00000002 // UART Clear to Send Modem + // Interrupt Mask +#define UART_IM_RIMIM 0x00000001 // UART Ring Indicator Modem + // Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_RIS register. +// +//***************************************************************************** +#define UART_RIS_LME5RIS 0x00008000 // LIN Mode Edge 5 Raw Interrupt + // Status +#define UART_RIS_LME1RIS 0x00004000 // LIN Mode Edge 1 Raw Interrupt + // Status +#define UART_RIS_LMSBRIS 0x00002000 // LIN Mode Sync Break Raw + // Interrupt Status +#define UART_RIS_OERIS 0x00000400 // UART Overrun Error Raw Interrupt + // Status +#define UART_RIS_BERIS 0x00000200 // UART Break Error Raw Interrupt + // Status +#define UART_RIS_PERIS 0x00000100 // UART Parity Error Raw Interrupt + // Status +#define UART_RIS_FERIS 0x00000080 // UART Framing Error Raw Interrupt + // Status +#define UART_RIS_RTRIS 0x00000040 // UART Receive Time-Out Raw + // Interrupt Status +#define UART_RIS_TXRIS 0x00000020 // UART Transmit Raw Interrupt + // Status +#define UART_RIS_RXRIS 0x00000010 // UART Receive Raw Interrupt + // Status +#define UART_RIS_DSRRIS 0x00000008 // UART Data Set Ready Modem Raw + // Interrupt Status +#define UART_RIS_DCDRIS 0x00000004 // UART Data Carrier Detect Modem + // Raw Interrupt Status +#define UART_RIS_CTSRIS 0x00000002 // UART Clear to Send Modem Raw + // Interrupt Status +#define UART_RIS_RIRIS 0x00000001 // UART Ring Indicator Modem Raw + // Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_MIS register. +// +//***************************************************************************** +#define UART_MIS_LME5MIS 0x00008000 // LIN Mode Edge 5 Masked Interrupt + // Status +#define UART_MIS_LME1MIS 0x00004000 // LIN Mode Edge 1 Masked Interrupt + // Status +#define UART_MIS_LMSBMIS 0x00002000 // LIN Mode Sync Break Masked + // Interrupt Status +#define UART_MIS_OEMIS 0x00000400 // UART Overrun Error Masked + // Interrupt Status +#define UART_MIS_BEMIS 0x00000200 // UART Break Error Masked + // Interrupt Status +#define UART_MIS_PEMIS 0x00000100 // UART Parity Error Masked + // Interrupt Status +#define UART_MIS_FEMIS 0x00000080 // UART Framing Error Masked + // Interrupt Status +#define UART_MIS_RTMIS 0x00000040 // UART Receive Time-Out Masked + // Interrupt Status +#define UART_MIS_TXMIS 0x00000020 // UART Transmit Masked Interrupt + // Status +#define UART_MIS_RXMIS 0x00000010 // UART Receive Masked Interrupt + // Status +#define UART_MIS_DSRMIS 0x00000008 // UART Data Set Ready Modem Masked + // Interrupt Status +#define UART_MIS_DCDMIS 0x00000004 // UART Data Carrier Detect Modem + // Masked Interrupt Status +#define UART_MIS_CTSMIS 0x00000002 // UART Clear to Send Modem Masked + // Interrupt Status +#define UART_MIS_RIMIS 0x00000001 // UART Ring Indicator Modem Masked + // Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_ICR register. +// +//***************************************************************************** +#define UART_ICR_LME5MIC 0x00008000 // LIN Mode Edge 5 Interrupt Clear +#define UART_ICR_LME1MIC 0x00004000 // LIN Mode Edge 1 Interrupt Clear +#define UART_ICR_LMSBMIC 0x00002000 // LIN Mode Sync Break Interrupt + // Clear +#define UART_ICR_OEIC 0x00000400 // Overrun Error Interrupt Clear +#define UART_ICR_BEIC 0x00000200 // Break Error Interrupt Clear +#define UART_ICR_PEIC 0x00000100 // Parity Error Interrupt Clear +#define UART_ICR_FEIC 0x00000080 // Framing Error Interrupt Clear +#define UART_ICR_RTIC 0x00000040 // Receive Time-Out Interrupt Clear +#define UART_ICR_TXIC 0x00000020 // Transmit Interrupt Clear +#define UART_ICR_RXIC 0x00000010 // Receive Interrupt Clear +#define UART_ICR_DSRMIC 0x00000008 // UART Data Set Ready Modem + // Interrupt Clear +#define UART_ICR_DCDMIC 0x00000004 // UART Data Carrier Detect Modem + // Interrupt Clear +#define UART_ICR_CTSMIC 0x00000002 // UART Clear to Send Modem + // Interrupt Clear +#define UART_ICR_RIMIC 0x00000001 // UART Ring Indicator Modem + // Interrupt Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_DMACTL register. +// +//***************************************************************************** +#define UART_DMACTL_DMAERR 0x00000004 // DMA on Error +#define UART_DMACTL_TXDMAE 0x00000002 // Transmit DMA Enable +#define UART_DMACTL_RXDMAE 0x00000001 // Receive DMA Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_LCTL register. +// +//***************************************************************************** +#define UART_LCTL_BLEN_M 0x00000030 // Sync Break Length +#define UART_LCTL_BLEN_13T 0x00000000 // Sync break length is 13T bits + // (default) +#define UART_LCTL_BLEN_14T 0x00000010 // Sync break length is 14T bits +#define UART_LCTL_BLEN_15T 0x00000020 // Sync break length is 15T bits +#define UART_LCTL_BLEN_16T 0x00000030 // Sync break length is 16T bits +#define UART_LCTL_MASTER 0x00000001 // LIN Master Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_LSS register. +// +//***************************************************************************** +#define UART_LSS_TSS_M 0x0000FFFF // Timer Snap Shot +#define UART_LSS_TSS_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_LTIM register. +// +//***************************************************************************** +#define UART_LTIM_TIMER_M 0x0000FFFF // Timer Value +#define UART_LTIM_TIMER_S 0 + +//***************************************************************************** +// +// The following definitions are deprecated. +// +//***************************************************************************** +#ifndef DEPRECATED + +//***************************************************************************** +// +// The following are deprecated defines for the UART register offsets. +// +//***************************************************************************** +#define UART_O_LCR_H 0x0000002C // Line Control Register, HIGH byte +#define UART_O_PeriphID4 0x00000FD0 +#define UART_O_PeriphID5 0x00000FD4 +#define UART_O_PeriphID6 0x00000FD8 +#define UART_O_PeriphID7 0x00000FDC +#define UART_O_PeriphID0 0x00000FE0 +#define UART_O_PeriphID1 0x00000FE4 +#define UART_O_PeriphID2 0x00000FE8 +#define UART_O_PeriphID3 0x00000FEC +#define UART_O_PCellID0 0x00000FF0 +#define UART_O_PCellID1 0x00000FF4 +#define UART_O_PCellID2 0x00000FF8 +#define UART_O_PCellID3 0x00000FFC + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the UART_O_DR +// register. +// +//***************************************************************************** +#define UART_DR_DATA_MASK 0x000000FF // UART data + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the UART_O_IBRD +// register. +// +//***************************************************************************** +#define UART_IBRD_DIVINT_MASK 0x0000FFFF // Integer baud-rate divisor + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the UART_O_FBRD +// register. +// +//***************************************************************************** +#define UART_FBRD_DIVFRAC_MASK 0x0000003F // Fractional baud-rate divisor + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the UART_O_LCR_H +// register. +// +//***************************************************************************** +#define UART_LCR_H_SPS 0x00000080 // Stick Parity Select +#define UART_LCR_H_WLEN 0x00000060 // Word length +#define UART_LCR_H_WLEN_5 0x00000000 // 5 bit data +#define UART_LCR_H_WLEN_6 0x00000020 // 6 bit data +#define UART_LCR_H_WLEN_7 0x00000040 // 7 bit data +#define UART_LCR_H_WLEN_8 0x00000060 // 8 bit data +#define UART_LCR_H_FEN 0x00000010 // Enable FIFO +#define UART_LCR_H_STP2 0x00000008 // Two Stop Bits Select +#define UART_LCR_H_EPS 0x00000004 // Even Parity Select +#define UART_LCR_H_PEN 0x00000002 // Parity Enable +#define UART_LCR_H_BRK 0x00000001 // Send Break + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the UART_O_IFLS +// register. +// +//***************************************************************************** +#define UART_IFLS_RX_MASK 0x00000038 // RX FIFO level mask +#define UART_IFLS_TX_MASK 0x00000007 // TX FIFO level mask + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the UART_O_ICR +// register. +// +//***************************************************************************** +#define UART_RSR_ANY (UART_RSR_OE | UART_RSR_BE | UART_RSR_PE | \ + UART_RSR_FE) + +//***************************************************************************** +// +// The following are deprecated defines for the Reset Values for UART +// Registers. +// +//***************************************************************************** +#define UART_RV_CTL 0x00000300 +#define UART_RV_PCellID1 0x000000F0 +#define UART_RV_PCellID3 0x000000B1 +#define UART_RV_FR 0x00000090 +#define UART_RV_PeriphID2 0x00000018 +#define UART_RV_IFLS 0x00000012 +#define UART_RV_PeriphID0 0x00000011 +#define UART_RV_PCellID0 0x0000000D +#define UART_RV_PCellID2 0x00000005 +#define UART_RV_PeriphID3 0x00000001 +#define UART_RV_PeriphID4 0x00000000 +#define UART_RV_LCR_H 0x00000000 +#define UART_RV_PeriphID6 0x00000000 +#define UART_RV_DR 0x00000000 +#define UART_RV_RSR 0x00000000 +#define UART_RV_ECR 0x00000000 +#define UART_RV_PeriphID5 0x00000000 +#define UART_RV_RIS 0x00000000 +#define UART_RV_FBRD 0x00000000 +#define UART_RV_IM 0x00000000 +#define UART_RV_MIS 0x00000000 +#define UART_RV_ICR 0x00000000 +#define UART_RV_PeriphID1 0x00000000 +#define UART_RV_PeriphID7 0x00000000 +#define UART_RV_IBRD 0x00000000 + +#endif + +#endif // __HW_UART_H__ diff --git a/bsp/lm3s_9b9x/Libraries/inc/hw_udma.h b/bsp/lm3s_9b9x/Libraries/inc/hw_udma.h new file mode 100644 index 0000000000000000000000000000000000000000..8fb06da8853402144bd27b6232e79306f7c9ed6e --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/inc/hw_udma.h @@ -0,0 +1,311 @@ +//***************************************************************************** +// +// hw_udma.h - Macros for use in accessing the UDMA registers. +// +// Copyright (c) 2007-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_UDMA_H__ +#define __HW_UDMA_H__ + +//***************************************************************************** +// +// The following are defines for the Micro Direct Memory Access register +// addresses. +// +//***************************************************************************** +#define UDMA_STAT 0x400FF000 // DMA Status +#define UDMA_CFG 0x400FF004 // DMA Configuration +#define UDMA_CTLBASE 0x400FF008 // DMA Channel Control Base Pointer +#define UDMA_ALTBASE 0x400FF00C // DMA Alternate Channel Control + // Base Pointer +#define UDMA_WAITSTAT 0x400FF010 // DMA Channel Wait-on-Request + // Status +#define UDMA_SWREQ 0x400FF014 // DMA Channel Software Request +#define UDMA_USEBURSTSET 0x400FF018 // DMA Channel Useburst Set +#define UDMA_USEBURSTCLR 0x400FF01C // DMA Channel Useburst Clear +#define UDMA_REQMASKSET 0x400FF020 // DMA Channel Request Mask Set +#define UDMA_REQMASKCLR 0x400FF024 // DMA Channel Request Mask Clear +#define UDMA_ENASET 0x400FF028 // DMA Channel Enable Set +#define UDMA_ENACLR 0x400FF02C // DMA Channel Enable Clear +#define UDMA_ALTSET 0x400FF030 // DMA Channel Primary Alternate + // Set +#define UDMA_ALTCLR 0x400FF034 // DMA Channel Primary Alternate + // Clear +#define UDMA_PRIOSET 0x400FF038 // DMA Channel Priority Set +#define UDMA_PRIOCLR 0x400FF03C // DMA Channel Priority Clear +#define UDMA_ERRCLR 0x400FF04C // DMA Bus Error Clear +#define UDMA_CHALT 0x400FF500 // DMA Channel Alternate Select + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_STAT register. +// +//***************************************************************************** +#define UDMA_STAT_DMACHANS_M 0x001F0000 // Available uDMA Channels Minus 1 +#define UDMA_STAT_STATE_M 0x000000F0 // Control State Machine Status +#define UDMA_STAT_STATE_IDLE 0x00000000 // Idle +#define UDMA_STAT_STATE_RD_CTRL 0x00000010 // Reading channel controller data +#define UDMA_STAT_STATE_RD_SRCENDP \ + 0x00000020 // Reading source end pointer +#define UDMA_STAT_STATE_RD_DSTENDP \ + 0x00000030 // Reading destination end pointer +#define UDMA_STAT_STATE_RD_SRCDAT \ + 0x00000040 // Reading source data +#define UDMA_STAT_STATE_WR_DSTDAT \ + 0x00000050 // Writing destination data +#define UDMA_STAT_STATE_WAIT 0x00000060 // Waiting for uDMA request to + // clear +#define UDMA_STAT_STATE_WR_CTRL 0x00000070 // Writing channel controller data +#define UDMA_STAT_STATE_STALL 0x00000080 // Stalled +#define UDMA_STAT_STATE_DONE 0x00000090 // Done +#define UDMA_STAT_STATE_UNDEF 0x000000A0 // Undefined +#define UDMA_STAT_MASTEN 0x00000001 // Master Enable Status +#define UDMA_STAT_DMACHANS_S 16 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_CFG register. +// +//***************************************************************************** +#define UDMA_CFG_MASTEN 0x00000001 // Controller Master Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_CTLBASE register. +// +//***************************************************************************** +#define UDMA_CTLBASE_ADDR_M 0xFFFFFC00 // Channel Control Base Address +#define UDMA_CTLBASE_ADDR_S 10 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_ALTBASE register. +// +//***************************************************************************** +#define UDMA_ALTBASE_ADDR_M 0xFFFFFFFF // Alternate Channel Address + // Pointer +#define UDMA_ALTBASE_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_WAITSTAT register. +// +//***************************************************************************** +#define UDMA_WAITSTAT_WAITREQ_M 0xFFFFFFFF // Channel [n] Wait Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_SWREQ register. +// +//***************************************************************************** +#define UDMA_SWREQ_M 0xFFFFFFFF // Channel [n] Software Request + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_USEBURSTSET +// register. +// +//***************************************************************************** +#define UDMA_USEBURSTSET_SET_M 0xFFFFFFFF // Channel [n] Useburst Set + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_USEBURSTCLR +// register. +// +//***************************************************************************** +#define UDMA_USEBURSTCLR_CLR_M 0xFFFFFFFF // Channel [n] Useburst Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_REQMASKSET +// register. +// +//***************************************************************************** +#define UDMA_REQMASKSET_SET_M 0xFFFFFFFF // Channel [n] Request Mask Set + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_REQMASKCLR +// register. +// +//***************************************************************************** +#define UDMA_REQMASKCLR_CLR_M 0xFFFFFFFF // Channel [n] Request Mask Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_ENASET register. +// +//***************************************************************************** +#define UDMA_ENASET_SET_M 0xFFFFFFFF // Channel [n] Enable Set + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_ENACLR register. +// +//***************************************************************************** +#define UDMA_ENACLR_CLR_M 0xFFFFFFFF // Clear Channel [n] Enable Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_ALTSET register. +// +//***************************************************************************** +#define UDMA_ALTSET_SET_M 0xFFFFFFFF // Channel [n] Alternate Set + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_ALTCLR register. +// +//***************************************************************************** +#define UDMA_ALTCLR_CLR_M 0xFFFFFFFF // Channel [n] Alternate Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_PRIOSET register. +// +//***************************************************************************** +#define UDMA_PRIOSET_SET_M 0xFFFFFFFF // Channel [n] Priority Set + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_PRIOCLR register. +// +//***************************************************************************** +#define UDMA_PRIOCLR_CLR_M 0xFFFFFFFF // Channel [n] Priority Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_ERRCLR register. +// +//***************************************************************************** +#define UDMA_ERRCLR_ERRCLR 0x00000001 // uDMA Bus Error Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_CHALT register. +// +//***************************************************************************** +#define UDMA_CHALT_M 0xFFFFFFFF // Channel [n] Alternate Assignment + // Select + +//***************************************************************************** +// +// The following are defines for the Micro Direct Memory Access (uDMA) offsets. +// +//***************************************************************************** +#define UDMA_O_SRCENDP 0x00000000 // DMA Channel Source Address End + // Pointer +#define UDMA_O_DSTENDP 0x00000004 // DMA Channel Destination Address + // End Pointer +#define UDMA_O_CHCTL 0x00000008 // DMA Channel Control Word + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_O_SRCENDP register. +// +//***************************************************************************** +#define UDMA_SRCENDP_ADDR_M 0xFFFFFFFF // Source Address End Pointer +#define UDMA_SRCENDP_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_O_DSTENDP register. +// +//***************************************************************************** +#define UDMA_DSTENDP_ADDR_M 0xFFFFFFFF // Destination Address End Pointer +#define UDMA_DSTENDP_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_O_CHCTL register. +// +//***************************************************************************** +#define UDMA_CHCTL_DSTINC_M 0xC0000000 // Destination Address Increment +#define UDMA_CHCTL_DSTINC_8 0x00000000 // Byte +#define UDMA_CHCTL_DSTINC_16 0x40000000 // Half-word +#define UDMA_CHCTL_DSTINC_32 0x80000000 // Word +#define UDMA_CHCTL_DSTINC_NONE 0xC0000000 // No increment +#define UDMA_CHCTL_DSTSIZE_M 0x30000000 // Destination Data Size +#define UDMA_CHCTL_DSTSIZE_8 0x00000000 // Byte +#define UDMA_CHCTL_DSTSIZE_16 0x10000000 // Half-word +#define UDMA_CHCTL_DSTSIZE_32 0x20000000 // Word +#define UDMA_CHCTL_SRCINC_M 0x0C000000 // Source Address Increment +#define UDMA_CHCTL_SRCINC_8 0x00000000 // Byte +#define UDMA_CHCTL_SRCINC_16 0x04000000 // Half-word +#define UDMA_CHCTL_SRCINC_32 0x08000000 // Word +#define UDMA_CHCTL_SRCINC_NONE 0x0C000000 // No increment +#define UDMA_CHCTL_SRCSIZE_M 0x03000000 // Source Data Size +#define UDMA_CHCTL_SRCSIZE_8 0x00000000 // Byte +#define UDMA_CHCTL_SRCSIZE_16 0x01000000 // Half-word +#define UDMA_CHCTL_SRCSIZE_32 0x02000000 // Word +#define UDMA_CHCTL_ARBSIZE_M 0x0003C000 // Arbitration Size +#define UDMA_CHCTL_ARBSIZE_1 0x00000000 // 1 Transfer +#define UDMA_CHCTL_ARBSIZE_2 0x00004000 // 2 Transfers +#define UDMA_CHCTL_ARBSIZE_4 0x00008000 // 4 Transfers +#define UDMA_CHCTL_ARBSIZE_8 0x0000C000 // 8 Transfers +#define UDMA_CHCTL_ARBSIZE_16 0x00010000 // 16 Transfers +#define UDMA_CHCTL_ARBSIZE_32 0x00014000 // 32 Transfers +#define UDMA_CHCTL_ARBSIZE_64 0x00018000 // 64 Transfers +#define UDMA_CHCTL_ARBSIZE_128 0x0001C000 // 128 Transfers +#define UDMA_CHCTL_ARBSIZE_256 0x00020000 // 256 Transfers +#define UDMA_CHCTL_ARBSIZE_512 0x00024000 // 512 Transfers +#define UDMA_CHCTL_ARBSIZE_1024 0x00028000 // 1024 Transfers +#define UDMA_CHCTL_XFERSIZE_M 0x00003FF0 // Transfer Size (minus 1) +#define UDMA_CHCTL_NXTUSEBURST 0x00000008 // Next Useburst +#define UDMA_CHCTL_XFERMODE_M 0x00000007 // uDMA Transfer Mode +#define UDMA_CHCTL_XFERMODE_STOP \ + 0x00000000 // Stop +#define UDMA_CHCTL_XFERMODE_BASIC \ + 0x00000001 // Basic +#define UDMA_CHCTL_XFERMODE_AUTO \ + 0x00000002 // Auto-Request +#define UDMA_CHCTL_XFERMODE_PINGPONG \ + 0x00000003 // Ping-Pong +#define UDMA_CHCTL_XFERMODE_MEM_SG \ + 0x00000004 // Memory Scatter-Gather +#define UDMA_CHCTL_XFERMODE_MEM_SGA \ + 0x00000005 // Alternate Memory Scatter-Gather +#define UDMA_CHCTL_XFERMODE_PER_SG \ + 0x00000006 // Peripheral Scatter-Gather +#define UDMA_CHCTL_XFERMODE_PER_SGA \ + 0x00000007 // Alternate Peripheral + // Scatter-Gather +#define UDMA_CHCTL_XFERSIZE_S 4 + +//***************************************************************************** +// +// The following definitions are deprecated. +// +//***************************************************************************** +#ifndef DEPRECATED + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the UDMA_ENASET +// register. +// +//***************************************************************************** +#define UDMA_ENASET_CHENSET_M 0xFFFFFFFF // Channel [n] Enable Set + +#endif + +#endif // __HW_UDMA_H__ diff --git a/bsp/lm3s_9b9x/Libraries/inc/hw_usb.h b/bsp/lm3s_9b9x/Libraries/inc/hw_usb.h new file mode 100644 index 0000000000000000000000000000000000000000..73c5e8e217888bc8e2a756b4d500cda85a0c22bc --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/inc/hw_usb.h @@ -0,0 +1,4620 @@ +//***************************************************************************** +// +// hw_usb.h - Macros for use in accessing the USB registers. +// +// Copyright (c) 2007-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_USB_H__ +#define __HW_USB_H__ + +//***************************************************************************** +// +// The following are defines for the Univeral Serial Bus register offsets. +// +//***************************************************************************** +#define USB_O_FADDR 0x00000000 // USB Device Functional Address +#define USB_O_POWER 0x00000001 // USB Power +#define USB_O_TXIS 0x00000002 // USB Transmit Interrupt Status +#define USB_O_RXIS 0x00000004 // USB Receive Interrupt Status +#define USB_O_TXIE 0x00000006 // USB Transmit Interrupt Enable +#define USB_O_RXIE 0x00000008 // USB Receive Interrupt Enable +#define USB_O_IS 0x0000000A // USB General Interrupt Status +#define USB_O_IE 0x0000000B // USB Interrupt Enable +#define USB_O_FRAME 0x0000000C // USB Frame Value +#define USB_O_EPIDX 0x0000000E // USB Endpoint Index +#define USB_O_TEST 0x0000000F // USB Test Mode +#define USB_O_FIFO0 0x00000020 // USB FIFO Endpoint 0 +#define USB_O_FIFO1 0x00000024 // USB FIFO Endpoint 1 +#define USB_O_FIFO2 0x00000028 // USB FIFO Endpoint 2 +#define USB_O_FIFO3 0x0000002C // USB FIFO Endpoint 3 +#define USB_O_FIFO4 0x00000030 // USB FIFO Endpoint 4 +#define USB_O_FIFO5 0x00000034 // USB FIFO Endpoint 5 +#define USB_O_FIFO6 0x00000038 // USB FIFO Endpoint 6 +#define USB_O_FIFO7 0x0000003C // USB FIFO Endpoint 7 +#define USB_O_FIFO8 0x00000040 // USB FIFO Endpoint 8 +#define USB_O_FIFO9 0x00000044 // USB FIFO Endpoint 9 +#define USB_O_FIFO10 0x00000048 // USB FIFO Endpoint 10 +#define USB_O_FIFO11 0x0000004C // USB FIFO Endpoint 11 +#define USB_O_FIFO12 0x00000050 // USB FIFO Endpoint 12 +#define USB_O_FIFO13 0x00000054 // USB FIFO Endpoint 13 +#define USB_O_FIFO14 0x00000058 // USB FIFO Endpoint 14 +#define USB_O_FIFO15 0x0000005C // USB FIFO Endpoint 15 +#define USB_O_DEVCTL 0x00000060 // USB Device Control +#define USB_O_TXFIFOSZ 0x00000062 // USB Transmit Dynamic FIFO Sizing +#define USB_O_RXFIFOSZ 0x00000063 // USB Receive Dynamic FIFO Sizing +#define USB_O_TXFIFOADD 0x00000064 // USB Transmit FIFO Start Address +#define USB_O_RXFIFOADD 0x00000066 // USB Receive FIFO Start Address +#define USB_O_CONTIM 0x0000007A // USB Connect Timing +#define USB_O_VPLEN 0x0000007B // USB OTG VBUS Pulse Timing +#define USB_O_FSEOF 0x0000007D // USB Full-Speed Last Transaction + // to End of Frame Timing +#define USB_O_LSEOF 0x0000007E // USB Low-Speed Last Transaction + // to End of Frame Timing +#define USB_O_TXFUNCADDR0 0x00000080 // USB Transmit Functional Address + // Endpoint 0 +#define USB_O_TXHUBADDR0 0x00000082 // USB Transmit Hub Address + // Endpoint 0 +#define USB_O_TXHUBPORT0 0x00000083 // USB Transmit Hub Port Endpoint 0 +#define USB_O_TXFUNCADDR1 0x00000088 // USB Transmit Functional Address + // Endpoint 1 +#define USB_O_TXHUBADDR1 0x0000008A // USB Transmit Hub Address + // Endpoint 1 +#define USB_O_TXHUBPORT1 0x0000008B // USB Transmit Hub Port Endpoint 1 +#define USB_O_RXFUNCADDR1 0x0000008C // USB Receive Functional Address + // Endpoint 1 +#define USB_O_RXHUBADDR1 0x0000008E // USB Receive Hub Address Endpoint + // 1 +#define USB_O_RXHUBPORT1 0x0000008F // USB Receive Hub Port Endpoint 1 +#define USB_O_TXFUNCADDR2 0x00000090 // USB Transmit Functional Address + // Endpoint 2 +#define USB_O_TXHUBADDR2 0x00000092 // USB Transmit Hub Address + // Endpoint 2 +#define USB_O_TXHUBPORT2 0x00000093 // USB Transmit Hub Port Endpoint 2 +#define USB_O_RXFUNCADDR2 0x00000094 // USB Receive Functional Address + // Endpoint 2 +#define USB_O_RXHUBADDR2 0x00000096 // USB Receive Hub Address Endpoint + // 2 +#define USB_O_RXHUBPORT2 0x00000097 // USB Receive Hub Port Endpoint 2 +#define USB_O_TXFUNCADDR3 0x00000098 // USB Transmit Functional Address + // Endpoint 3 +#define USB_O_TXHUBADDR3 0x0000009A // USB Transmit Hub Address + // Endpoint 3 +#define USB_O_TXHUBPORT3 0x0000009B // USB Transmit Hub Port Endpoint 3 +#define USB_O_RXFUNCADDR3 0x0000009C // USB Receive Functional Address + // Endpoint 3 +#define USB_O_RXHUBADDR3 0x0000009E // USB Receive Hub Address Endpoint + // 3 +#define USB_O_RXHUBPORT3 0x0000009F // USB Receive Hub Port Endpoint 3 +#define USB_O_TXFUNCADDR4 0x000000A0 // USB Transmit Functional Address + // Endpoint 4 +#define USB_O_TXHUBADDR4 0x000000A2 // USB Transmit Hub Address + // Endpoint 4 +#define USB_O_TXHUBPORT4 0x000000A3 // USB Transmit Hub Port Endpoint 4 +#define USB_O_RXFUNCADDR4 0x000000A4 // USB Receive Functional Address + // Endpoint 4 +#define USB_O_RXHUBADDR4 0x000000A6 // USB Receive Hub Address Endpoint + // 4 +#define USB_O_RXHUBPORT4 0x000000A7 // USB Receive Hub Port Endpoint 4 +#define USB_O_TXFUNCADDR5 0x000000A8 // USB Transmit Functional Address + // Endpoint 5 +#define USB_O_TXHUBADDR5 0x000000AA // USB Transmit Hub Address + // Endpoint 5 +#define USB_O_TXHUBPORT5 0x000000AB // USB Transmit Hub Port Endpoint 5 +#define USB_O_RXFUNCADDR5 0x000000AC // USB Receive Functional Address + // Endpoint 5 +#define USB_O_RXHUBADDR5 0x000000AE // USB Receive Hub Address Endpoint + // 5 +#define USB_O_RXHUBPORT5 0x000000AF // USB Receive Hub Port Endpoint 5 +#define USB_O_TXFUNCADDR6 0x000000B0 // USB Transmit Functional Address + // Endpoint 6 +#define USB_O_TXHUBADDR6 0x000000B2 // USB Transmit Hub Address + // Endpoint 6 +#define USB_O_TXHUBPORT6 0x000000B3 // USB Transmit Hub Port Endpoint 6 +#define USB_O_RXFUNCADDR6 0x000000B4 // USB Receive Functional Address + // Endpoint 6 +#define USB_O_RXHUBADDR6 0x000000B6 // USB Receive Hub Address Endpoint + // 6 +#define USB_O_RXHUBPORT6 0x000000B7 // USB Receive Hub Port Endpoint 6 +#define USB_O_TXFUNCADDR7 0x000000B8 // USB Transmit Functional Address + // Endpoint 7 +#define USB_O_TXHUBADDR7 0x000000BA // USB Transmit Hub Address + // Endpoint 7 +#define USB_O_TXHUBPORT7 0x000000BB // USB Transmit Hub Port Endpoint 7 +#define USB_O_RXFUNCADDR7 0x000000BC // USB Receive Functional Address + // Endpoint 7 +#define USB_O_RXHUBADDR7 0x000000BE // USB Receive Hub Address Endpoint + // 7 +#define USB_O_RXHUBPORT7 0x000000BF // USB Receive Hub Port Endpoint 7 +#define USB_O_TXFUNCADDR8 0x000000C0 // USB Transmit Functional Address + // Endpoint 8 +#define USB_O_TXHUBADDR8 0x000000C2 // USB Transmit Hub Address + // Endpoint 8 +#define USB_O_TXHUBPORT8 0x000000C3 // USB Transmit Hub Port Endpoint 8 +#define USB_O_RXFUNCADDR8 0x000000C4 // USB Receive Functional Address + // Endpoint 8 +#define USB_O_RXHUBADDR8 0x000000C6 // USB Receive Hub Address Endpoint + // 8 +#define USB_O_RXHUBPORT8 0x000000C7 // USB Receive Hub Port Endpoint 8 +#define USB_O_TXFUNCADDR9 0x000000C8 // USB Transmit Functional Address + // Endpoint 9 +#define USB_O_TXHUBADDR9 0x000000CA // USB Transmit Hub Address + // Endpoint 9 +#define USB_O_TXHUBPORT9 0x000000CB // USB Transmit Hub Port Endpoint 9 +#define USB_O_RXFUNCADDR9 0x000000CC // USB Receive Functional Address + // Endpoint 9 +#define USB_O_RXHUBADDR9 0x000000CE // USB Receive Hub Address Endpoint + // 9 +#define USB_O_RXHUBPORT9 0x000000CF // USB Receive Hub Port Endpoint 9 +#define USB_O_TXFUNCADDR10 0x000000D0 // USB Transmit Functional Address + // Endpoint 10 +#define USB_O_TXHUBADDR10 0x000000D2 // USB Transmit Hub Address + // Endpoint 10 +#define USB_O_TXHUBPORT10 0x000000D3 // USB Transmit Hub Port Endpoint + // 10 +#define USB_O_RXFUNCADDR10 0x000000D4 // USB Receive Functional Address + // Endpoint 10 +#define USB_O_RXHUBADDR10 0x000000D6 // USB Receive Hub Address Endpoint + // 10 +#define USB_O_RXHUBPORT10 0x000000D7 // USB Receive Hub Port Endpoint 10 +#define USB_O_TXFUNCADDR11 0x000000D8 // USB Transmit Functional Address + // Endpoint 11 +#define USB_O_TXHUBADDR11 0x000000DA // USB Transmit Hub Address + // Endpoint 11 +#define USB_O_TXHUBPORT11 0x000000DB // USB Transmit Hub Port Endpoint + // 11 +#define USB_O_RXFUNCADDR11 0x000000DC // USB Receive Functional Address + // Endpoint 11 +#define USB_O_RXHUBADDR11 0x000000DE // USB Receive Hub Address Endpoint + // 11 +#define USB_O_RXHUBPORT11 0x000000DF // USB Receive Hub Port Endpoint 11 +#define USB_O_TXFUNCADDR12 0x000000E0 // USB Transmit Functional Address + // Endpoint 12 +#define USB_O_TXHUBADDR12 0x000000E2 // USB Transmit Hub Address + // Endpoint 12 +#define USB_O_TXHUBPORT12 0x000000E3 // USB Transmit Hub Port Endpoint + // 12 +#define USB_O_RXFUNCADDR12 0x000000E4 // USB Receive Functional Address + // Endpoint 12 +#define USB_O_RXHUBADDR12 0x000000E6 // USB Receive Hub Address Endpoint + // 12 +#define USB_O_RXHUBPORT12 0x000000E7 // USB Receive Hub Port Endpoint 12 +#define USB_O_TXFUNCADDR13 0x000000E8 // USB Transmit Functional Address + // Endpoint 13 +#define USB_O_TXHUBADDR13 0x000000EA // USB Transmit Hub Address + // Endpoint 13 +#define USB_O_TXHUBPORT13 0x000000EB // USB Transmit Hub Port Endpoint + // 13 +#define USB_O_RXFUNCADDR13 0x000000EC // USB Receive Functional Address + // Endpoint 13 +#define USB_O_RXHUBADDR13 0x000000EE // USB Receive Hub Address Endpoint + // 13 +#define USB_O_RXHUBPORT13 0x000000EF // USB Receive Hub Port Endpoint 13 +#define USB_O_TXFUNCADDR14 0x000000F0 // USB Transmit Functional Address + // Endpoint 14 +#define USB_O_TXHUBADDR14 0x000000F2 // USB Transmit Hub Address + // Endpoint 14 +#define USB_O_TXHUBPORT14 0x000000F3 // USB Transmit Hub Port Endpoint + // 14 +#define USB_O_RXFUNCADDR14 0x000000F4 // USB Receive Functional Address + // Endpoint 14 +#define USB_O_RXHUBADDR14 0x000000F6 // USB Receive Hub Address Endpoint + // 14 +#define USB_O_RXHUBPORT14 0x000000F7 // USB Receive Hub Port Endpoint 14 +#define USB_O_TXFUNCADDR15 0x000000F8 // USB Transmit Functional Address + // Endpoint 15 +#define USB_O_TXHUBADDR15 0x000000FA // USB Transmit Hub Address + // Endpoint 15 +#define USB_O_TXHUBPORT15 0x000000FB // USB Transmit Hub Port Endpoint + // 15 +#define USB_O_RXFUNCADDR15 0x000000FC // USB Receive Functional Address + // Endpoint 15 +#define USB_O_RXHUBADDR15 0x000000FE // USB Receive Hub Address Endpoint + // 15 +#define USB_O_RXHUBPORT15 0x000000FF // USB Receive Hub Port Endpoint 15 +#define USB_O_CSRL0 0x00000102 // USB Control and Status Endpoint + // 0 Low +#define USB_O_CSRH0 0x00000103 // USB Control and Status Endpoint + // 0 High +#define USB_O_COUNT0 0x00000108 // USB Receive Byte Count Endpoint + // 0 +#define USB_O_TYPE0 0x0000010A // USB Type Endpoint 0 +#define USB_O_NAKLMT 0x0000010B // USB NAK Limit +#define USB_O_TXMAXP1 0x00000110 // USB Maximum Transmit Data + // Endpoint 1 +#define USB_O_TXCSRL1 0x00000112 // USB Transmit Control and Status + // Endpoint 1 Low +#define USB_O_TXCSRH1 0x00000113 // USB Transmit Control and Status + // Endpoint 1 High +#define USB_O_RXMAXP1 0x00000114 // USB Maximum Receive Data + // Endpoint 1 +#define USB_O_RXCSRL1 0x00000116 // USB Receive Control and Status + // Endpoint 1 Low +#define USB_O_RXCSRH1 0x00000117 // USB Receive Control and Status + // Endpoint 1 High +#define USB_O_RXCOUNT1 0x00000118 // USB Receive Byte Count Endpoint + // 1 +#define USB_O_TXTYPE1 0x0000011A // USB Host Transmit Configure Type + // Endpoint 1 +#define USB_O_TXINTERVAL1 0x0000011B // USB Host Transmit Interval + // Endpoint 1 +#define USB_O_RXTYPE1 0x0000011C // USB Host Configure Receive Type + // Endpoint 1 +#define USB_O_RXINTERVAL1 0x0000011D // USB Host Receive Polling + // Interval Endpoint 1 +#define USB_O_TXMAXP2 0x00000120 // USB Maximum Transmit Data + // Endpoint 2 +#define USB_O_TXCSRL2 0x00000122 // USB Transmit Control and Status + // Endpoint 2 Low +#define USB_O_TXCSRH2 0x00000123 // USB Transmit Control and Status + // Endpoint 2 High +#define USB_O_RXMAXP2 0x00000124 // USB Maximum Receive Data + // Endpoint 2 +#define USB_O_RXCSRL2 0x00000126 // USB Receive Control and Status + // Endpoint 2 Low +#define USB_O_RXCSRH2 0x00000127 // USB Receive Control and Status + // Endpoint 2 High +#define USB_O_RXCOUNT2 0x00000128 // USB Receive Byte Count Endpoint + // 2 +#define USB_O_TXTYPE2 0x0000012A // USB Host Transmit Configure Type + // Endpoint 2 +#define USB_O_TXINTERVAL2 0x0000012B // USB Host Transmit Interval + // Endpoint 2 +#define USB_O_RXTYPE2 0x0000012C // USB Host Configure Receive Type + // Endpoint 2 +#define USB_O_RXINTERVAL2 0x0000012D // USB Host Receive Polling + // Interval Endpoint 2 +#define USB_O_TXMAXP3 0x00000130 // USB Maximum Transmit Data + // Endpoint 3 +#define USB_O_TXCSRL3 0x00000132 // USB Transmit Control and Status + // Endpoint 3 Low +#define USB_O_TXCSRH3 0x00000133 // USB Transmit Control and Status + // Endpoint 3 High +#define USB_O_RXMAXP3 0x00000134 // USB Maximum Receive Data + // Endpoint 3 +#define USB_O_RXCSRL3 0x00000136 // USB Receive Control and Status + // Endpoint 3 Low +#define USB_O_RXCSRH3 0x00000137 // USB Receive Control and Status + // Endpoint 3 High +#define USB_O_RXCOUNT3 0x00000138 // USB Receive Byte Count Endpoint + // 3 +#define USB_O_TXTYPE3 0x0000013A // USB Host Transmit Configure Type + // Endpoint 3 +#define USB_O_TXINTERVAL3 0x0000013B // USB Host Transmit Interval + // Endpoint 3 +#define USB_O_RXTYPE3 0x0000013C // USB Host Configure Receive Type + // Endpoint 3 +#define USB_O_RXINTERVAL3 0x0000013D // USB Host Receive Polling + // Interval Endpoint 3 +#define USB_O_TXMAXP4 0x00000140 // USB Maximum Transmit Data + // Endpoint 4 +#define USB_O_TXCSRL4 0x00000142 // USB Transmit Control and Status + // Endpoint 4 Low +#define USB_O_TXCSRH4 0x00000143 // USB Transmit Control and Status + // Endpoint 4 High +#define USB_O_RXMAXP4 0x00000144 // USB Maximum Receive Data + // Endpoint 4 +#define USB_O_RXCSRL4 0x00000146 // USB Receive Control and Status + // Endpoint 4 Low +#define USB_O_RXCSRH4 0x00000147 // USB Receive Control and Status + // Endpoint 4 High +#define USB_O_RXCOUNT4 0x00000148 // USB Receive Byte Count Endpoint + // 4 +#define USB_O_TXTYPE4 0x0000014A // USB Host Transmit Configure Type + // Endpoint 4 +#define USB_O_TXINTERVAL4 0x0000014B // USB Host Transmit Interval + // Endpoint 4 +#define USB_O_RXTYPE4 0x0000014C // USB Host Configure Receive Type + // Endpoint 4 +#define USB_O_RXINTERVAL4 0x0000014D // USB Host Receive Polling + // Interval Endpoint 4 +#define USB_O_TXMAXP5 0x00000150 // USB Maximum Transmit Data + // Endpoint 5 +#define USB_O_TXCSRL5 0x00000152 // USB Transmit Control and Status + // Endpoint 5 Low +#define USB_O_TXCSRH5 0x00000153 // USB Transmit Control and Status + // Endpoint 5 High +#define USB_O_RXMAXP5 0x00000154 // USB Maximum Receive Data + // Endpoint 5 +#define USB_O_RXCSRL5 0x00000156 // USB Receive Control and Status + // Endpoint 5 Low +#define USB_O_RXCSRH5 0x00000157 // USB Receive Control and Status + // Endpoint 5 High +#define USB_O_RXCOUNT5 0x00000158 // USB Receive Byte Count Endpoint + // 5 +#define USB_O_TXTYPE5 0x0000015A // USB Host Transmit Configure Type + // Endpoint 5 +#define USB_O_TXINTERVAL5 0x0000015B // USB Host Transmit Interval + // Endpoint 5 +#define USB_O_RXTYPE5 0x0000015C // USB Host Configure Receive Type + // Endpoint 5 +#define USB_O_RXINTERVAL5 0x0000015D // USB Host Receive Polling + // Interval Endpoint 5 +#define USB_O_TXMAXP6 0x00000160 // USB Maximum Transmit Data + // Endpoint 6 +#define USB_O_TXCSRL6 0x00000162 // USB Transmit Control and Status + // Endpoint 6 Low +#define USB_O_TXCSRH6 0x00000163 // USB Transmit Control and Status + // Endpoint 6 High +#define USB_O_RXMAXP6 0x00000164 // USB Maximum Receive Data + // Endpoint 6 +#define USB_O_RXCSRL6 0x00000166 // USB Receive Control and Status + // Endpoint 6 Low +#define USB_O_RXCSRH6 0x00000167 // USB Receive Control and Status + // Endpoint 6 High +#define USB_O_RXCOUNT6 0x00000168 // USB Receive Byte Count Endpoint + // 6 +#define USB_O_TXTYPE6 0x0000016A // USB Host Transmit Configure Type + // Endpoint 6 +#define USB_O_TXINTERVAL6 0x0000016B // USB Host Transmit Interval + // Endpoint 6 +#define USB_O_RXTYPE6 0x0000016C // USB Host Configure Receive Type + // Endpoint 6 +#define USB_O_RXINTERVAL6 0x0000016D // USB Host Receive Polling + // Interval Endpoint 6 +#define USB_O_TXMAXP7 0x00000170 // USB Maximum Transmit Data + // Endpoint 7 +#define USB_O_TXCSRL7 0x00000172 // USB Transmit Control and Status + // Endpoint 7 Low +#define USB_O_TXCSRH7 0x00000173 // USB Transmit Control and Status + // Endpoint 7 High +#define USB_O_RXMAXP7 0x00000174 // USB Maximum Receive Data + // Endpoint 7 +#define USB_O_RXCSRL7 0x00000176 // USB Receive Control and Status + // Endpoint 7 Low +#define USB_O_RXCSRH7 0x00000177 // USB Receive Control and Status + // Endpoint 7 High +#define USB_O_RXCOUNT7 0x00000178 // USB Receive Byte Count Endpoint + // 7 +#define USB_O_TXTYPE7 0x0000017A // USB Host Transmit Configure Type + // Endpoint 7 +#define USB_O_TXINTERVAL7 0x0000017B // USB Host Transmit Interval + // Endpoint 7 +#define USB_O_RXTYPE7 0x0000017C // USB Host Configure Receive Type + // Endpoint 7 +#define USB_O_RXINTERVAL7 0x0000017D // USB Host Receive Polling + // Interval Endpoint 7 +#define USB_O_TXMAXP8 0x00000180 // USB Maximum Transmit Data + // Endpoint 8 +#define USB_O_TXCSRL8 0x00000182 // USB Transmit Control and Status + // Endpoint 8 Low +#define USB_O_TXCSRH8 0x00000183 // USB Transmit Control and Status + // Endpoint 8 High +#define USB_O_RXMAXP8 0x00000184 // USB Maximum Receive Data + // Endpoint 8 +#define USB_O_RXCSRL8 0x00000186 // USB Receive Control and Status + // Endpoint 8 Low +#define USB_O_RXCSRH8 0x00000187 // USB Receive Control and Status + // Endpoint 8 High +#define USB_O_RXCOUNT8 0x00000188 // USB Receive Byte Count Endpoint + // 8 +#define USB_O_TXTYPE8 0x0000018A // USB Host Transmit Configure Type + // Endpoint 8 +#define USB_O_TXINTERVAL8 0x0000018B // USB Host Transmit Interval + // Endpoint 8 +#define USB_O_RXTYPE8 0x0000018C // USB Host Configure Receive Type + // Endpoint 8 +#define USB_O_RXINTERVAL8 0x0000018D // USB Host Receive Polling + // Interval Endpoint 8 +#define USB_O_TXMAXP9 0x00000190 // USB Maximum Transmit Data + // Endpoint 9 +#define USB_O_TXCSRL9 0x00000192 // USB Transmit Control and Status + // Endpoint 9 Low +#define USB_O_TXCSRH9 0x00000193 // USB Transmit Control and Status + // Endpoint 9 High +#define USB_O_RXMAXP9 0x00000194 // USB Maximum Receive Data + // Endpoint 9 +#define USB_O_RXCSRL9 0x00000196 // USB Receive Control and Status + // Endpoint 9 Low +#define USB_O_RXCSRH9 0x00000197 // USB Receive Control and Status + // Endpoint 9 High +#define USB_O_RXCOUNT9 0x00000198 // USB Receive Byte Count Endpoint + // 9 +#define USB_O_TXTYPE9 0x0000019A // USB Host Transmit Configure Type + // Endpoint 9 +#define USB_O_TXINTERVAL9 0x0000019B // USB Host Transmit Interval + // Endpoint 9 +#define USB_O_RXTYPE9 0x0000019C // USB Host Configure Receive Type + // Endpoint 9 +#define USB_O_RXINTERVAL9 0x0000019D // USB Host Receive Polling + // Interval Endpoint 9 +#define USB_O_TXMAXP10 0x000001A0 // USB Maximum Transmit Data + // Endpoint 10 +#define USB_O_TXCSRL10 0x000001A2 // USB Transmit Control and Status + // Endpoint 10 Low +#define USB_O_TXCSRH10 0x000001A3 // USB Transmit Control and Status + // Endpoint 10 High +#define USB_O_RXMAXP10 0x000001A4 // USB Maximum Receive Data + // Endpoint 10 +#define USB_O_RXCSRL10 0x000001A6 // USB Receive Control and Status + // Endpoint 10 Low +#define USB_O_RXCSRH10 0x000001A7 // USB Receive Control and Status + // Endpoint 10 High +#define USB_O_RXCOUNT10 0x000001A8 // USB Receive Byte Count Endpoint + // 10 +#define USB_O_TXTYPE10 0x000001AA // USB Host Transmit Configure Type + // Endpoint 10 +#define USB_O_TXINTERVAL10 0x000001AB // USB Host Transmit Interval + // Endpoint 10 +#define USB_O_RXTYPE10 0x000001AC // USB Host Configure Receive Type + // Endpoint 10 +#define USB_O_RXINTERVAL10 0x000001AD // USB Host Receive Polling + // Interval Endpoint 10 +#define USB_O_TXMAXP11 0x000001B0 // USB Maximum Transmit Data + // Endpoint 11 +#define USB_O_TXCSRL11 0x000001B2 // USB Transmit Control and Status + // Endpoint 11 Low +#define USB_O_TXCSRH11 0x000001B3 // USB Transmit Control and Status + // Endpoint 11 High +#define USB_O_RXMAXP11 0x000001B4 // USB Maximum Receive Data + // Endpoint 11 +#define USB_O_RXCSRL11 0x000001B6 // USB Receive Control and Status + // Endpoint 11 Low +#define USB_O_RXCSRH11 0x000001B7 // USB Receive Control and Status + // Endpoint 11 High +#define USB_O_RXCOUNT11 0x000001B8 // USB Receive Byte Count Endpoint + // 11 +#define USB_O_TXTYPE11 0x000001BA // USB Host Transmit Configure Type + // Endpoint 11 +#define USB_O_TXINTERVAL11 0x000001BB // USB Host Transmit Interval + // Endpoint 11 +#define USB_O_RXTYPE11 0x000001BC // USB Host Configure Receive Type + // Endpoint 11 +#define USB_O_RXINTERVAL11 0x000001BD // USB Host Receive Polling + // Interval Endpoint 11 +#define USB_O_TXMAXP12 0x000001C0 // USB Maximum Transmit Data + // Endpoint 12 +#define USB_O_TXCSRL12 0x000001C2 // USB Transmit Control and Status + // Endpoint 12 Low +#define USB_O_TXCSRH12 0x000001C3 // USB Transmit Control and Status + // Endpoint 12 High +#define USB_O_RXMAXP12 0x000001C4 // USB Maximum Receive Data + // Endpoint 12 +#define USB_O_RXCSRL12 0x000001C6 // USB Receive Control and Status + // Endpoint 12 Low +#define USB_O_RXCSRH12 0x000001C7 // USB Receive Control and Status + // Endpoint 12 High +#define USB_O_RXCOUNT12 0x000001C8 // USB Receive Byte Count Endpoint + // 12 +#define USB_O_TXTYPE12 0x000001CA // USB Host Transmit Configure Type + // Endpoint 12 +#define USB_O_TXINTERVAL12 0x000001CB // USB Host Transmit Interval + // Endpoint 12 +#define USB_O_RXTYPE12 0x000001CC // USB Host Configure Receive Type + // Endpoint 12 +#define USB_O_RXINTERVAL12 0x000001CD // USB Host Receive Polling + // Interval Endpoint 12 +#define USB_O_TXMAXP13 0x000001D0 // USB Maximum Transmit Data + // Endpoint 13 +#define USB_O_TXCSRL13 0x000001D2 // USB Transmit Control and Status + // Endpoint 13 Low +#define USB_O_TXCSRH13 0x000001D3 // USB Transmit Control and Status + // Endpoint 13 High +#define USB_O_RXMAXP13 0x000001D4 // USB Maximum Receive Data + // Endpoint 13 +#define USB_O_RXCSRL13 0x000001D6 // USB Receive Control and Status + // Endpoint 13 Low +#define USB_O_RXCSRH13 0x000001D7 // USB Receive Control and Status + // Endpoint 13 High +#define USB_O_RXCOUNT13 0x000001D8 // USB Receive Byte Count Endpoint + // 13 +#define USB_O_TXTYPE13 0x000001DA // USB Host Transmit Configure Type + // Endpoint 13 +#define USB_O_TXINTERVAL13 0x000001DB // USB Host Transmit Interval + // Endpoint 13 +#define USB_O_RXTYPE13 0x000001DC // USB Host Configure Receive Type + // Endpoint 13 +#define USB_O_RXINTERVAL13 0x000001DD // USB Host Receive Polling + // Interval Endpoint 13 +#define USB_O_TXMAXP14 0x000001E0 // USB Maximum Transmit Data + // Endpoint 14 +#define USB_O_TXCSRL14 0x000001E2 // USB Transmit Control and Status + // Endpoint 14 Low +#define USB_O_TXCSRH14 0x000001E3 // USB Transmit Control and Status + // Endpoint 14 High +#define USB_O_RXMAXP14 0x000001E4 // USB Maximum Receive Data + // Endpoint 14 +#define USB_O_RXCSRL14 0x000001E6 // USB Receive Control and Status + // Endpoint 14 Low +#define USB_O_RXCSRH14 0x000001E7 // USB Receive Control and Status + // Endpoint 14 High +#define USB_O_RXCOUNT14 0x000001E8 // USB Receive Byte Count Endpoint + // 14 +#define USB_O_TXTYPE14 0x000001EA // USB Host Transmit Configure Type + // Endpoint 14 +#define USB_O_TXINTERVAL14 0x000001EB // USB Host Transmit Interval + // Endpoint 14 +#define USB_O_RXTYPE14 0x000001EC // USB Host Configure Receive Type + // Endpoint 14 +#define USB_O_RXINTERVAL14 0x000001ED // USB Host Receive Polling + // Interval Endpoint 14 +#define USB_O_TXMAXP15 0x000001F0 // USB Maximum Transmit Data + // Endpoint 15 +#define USB_O_TXCSRL15 0x000001F2 // USB Transmit Control and Status + // Endpoint 15 Low +#define USB_O_TXCSRH15 0x000001F3 // USB Transmit Control and Status + // Endpoint 15 High +#define USB_O_RXMAXP15 0x000001F4 // USB Maximum Receive Data + // Endpoint 15 +#define USB_O_RXCSRL15 0x000001F6 // USB Receive Control and Status + // Endpoint 15 Low +#define USB_O_RXCSRH15 0x000001F7 // USB Receive Control and Status + // Endpoint 15 High +#define USB_O_RXCOUNT15 0x000001F8 // USB Receive Byte Count Endpoint + // 15 +#define USB_O_TXTYPE15 0x000001FA // USB Host Transmit Configure Type + // Endpoint 15 +#define USB_O_TXINTERVAL15 0x000001FB // USB Host Transmit Interval + // Endpoint 15 +#define USB_O_RXTYPE15 0x000001FC // USB Host Configure Receive Type + // Endpoint 15 +#define USB_O_RXINTERVAL15 0x000001FD // USB Host Receive Polling + // Interval Endpoint 15 +#define USB_O_RQPKTCOUNT1 0x00000304 // USB Request Packet Count in + // Block Transfer Endpoint 1 +#define USB_O_RQPKTCOUNT2 0x00000308 // USB Request Packet Count in + // Block Transfer Endpoint 2 +#define USB_O_RQPKTCOUNT3 0x0000030C // USB Request Packet Count in + // Block Transfer Endpoint 3 +#define USB_O_RQPKTCOUNT4 0x00000310 // USB Request Packet Count in + // Block Transfer Endpoint 4 +#define USB_O_RQPKTCOUNT5 0x00000314 // USB Request Packet Count in + // Block Transfer Endpoint 5 +#define USB_O_RQPKTCOUNT6 0x00000318 // USB Request Packet Count in + // Block Transfer Endpoint 6 +#define USB_O_RQPKTCOUNT7 0x0000031C // USB Request Packet Count in + // Block Transfer Endpoint 7 +#define USB_O_RQPKTCOUNT8 0x00000320 // USB Request Packet Count in + // Block Transfer Endpoint 8 +#define USB_O_RQPKTCOUNT9 0x00000324 // USB Request Packet Count in + // Block Transfer Endpoint 9 +#define USB_O_RQPKTCOUNT10 0x00000328 // USB Request Packet Count in + // Block Transfer Endpoint 10 +#define USB_O_RQPKTCOUNT11 0x0000032C // USB Request Packet Count in + // Block Transfer Endpoint 11 +#define USB_O_RQPKTCOUNT12 0x00000330 // USB Request Packet Count in + // Block Transfer Endpoint 12 +#define USB_O_RQPKTCOUNT13 0x00000334 // USB Request Packet Count in + // Block Transfer Endpoint 13 +#define USB_O_RQPKTCOUNT14 0x00000338 // USB Request Packet Count in + // Block Transfer Endpoint 14 +#define USB_O_RQPKTCOUNT15 0x0000033C // USB Request Packet Count in + // Block Transfer Endpoint 15 +#define USB_O_RXDPKTBUFDIS 0x00000340 // USB Receive Double Packet Buffer + // Disable +#define USB_O_TXDPKTBUFDIS 0x00000342 // USB Transmit Double Packet + // Buffer Disable +#define USB_O_EPC 0x00000400 // USB External Power Control +#define USB_O_EPCRIS 0x00000404 // USB External Power Control Raw + // Interrupt Status +#define USB_O_EPCIM 0x00000408 // USB External Power Control + // Interrupt Mask +#define USB_O_EPCISC 0x0000040C // USB External Power Control + // Interrupt Status and Clear +#define USB_O_DRRIS 0x00000410 // USB Device RESUME Raw Interrupt + // Status +#define USB_O_DRIM 0x00000414 // USB Device RESUME Interrupt Mask +#define USB_O_DRISC 0x00000418 // USB Device RESUME Interrupt + // Status and Clear +#define USB_O_GPCS 0x0000041C // USB General-Purpose Control and + // Status +#define USB_O_VDC 0x00000430 // USB VBUS Droop Control +#define USB_O_VDCRIS 0x00000434 // USB VBUS Droop Control Raw + // Interrupt Status +#define USB_O_VDCIM 0x00000438 // USB VBUS Droop Control Interrupt + // Mask +#define USB_O_VDCISC 0x0000043C // USB VBUS Droop Control Interrupt + // Status and Clear +#define USB_O_IDVRIS 0x00000444 // USB ID Valid Detect Raw + // Interrupt Status +#define USB_O_IDVIM 0x00000448 // USB ID Valid Detect Interrupt + // Mask +#define USB_O_IDVISC 0x0000044C // USB ID Valid Detect Interrupt + // Status and Clear +#define USB_O_DMASEL 0x00000450 // USB DMA Select + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FADDR register. +// +//***************************************************************************** +#define USB_FADDR_M 0x0000007F // Function Address +#define USB_FADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_POWER register. +// +//***************************************************************************** +#define USB_POWER_ISOUP 0x00000080 // Isochronous Update +#define USB_POWER_SOFTCONN 0x00000040 // Soft Connect/Disconnect +#define USB_POWER_RESET 0x00000008 // RESET Signaling +#define USB_POWER_RESUME 0x00000004 // RESUME Signaling +#define USB_POWER_SUSPEND 0x00000002 // SUSPEND Mode +#define USB_POWER_PWRDNPHY 0x00000001 // Power Down PHY + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXIS register. +// +//***************************************************************************** +#define USB_TXIS_EP15 0x00008000 // TX Endpoint 15 Interrupt +#define USB_TXIS_EP14 0x00004000 // TX Endpoint 14 Interrupt +#define USB_TXIS_EP13 0x00002000 // TX Endpoint 13 Interrupt +#define USB_TXIS_EP12 0x00001000 // TX Endpoint 12 Interrupt +#define USB_TXIS_EP11 0x00000800 // TX Endpoint 11 Interrupt +#define USB_TXIS_EP10 0x00000400 // TX Endpoint 10 Interrupt +#define USB_TXIS_EP9 0x00000200 // TX Endpoint 9 Interrupt +#define USB_TXIS_EP8 0x00000100 // TX Endpoint 8 Interrupt +#define USB_TXIS_EP7 0x00000080 // TX Endpoint 7 Interrupt +#define USB_TXIS_EP6 0x00000040 // TX Endpoint 6 Interrupt +#define USB_TXIS_EP5 0x00000020 // TX Endpoint 5 Interrupt +#define USB_TXIS_EP4 0x00000010 // TX Endpoint 4 Interrupt +#define USB_TXIS_EP3 0x00000008 // TX Endpoint 3 Interrupt +#define USB_TXIS_EP2 0x00000004 // TX Endpoint 2 Interrupt +#define USB_TXIS_EP1 0x00000002 // TX Endpoint 1 Interrupt +#define USB_TXIS_EP0 0x00000001 // TX and RX Endpoint 0 Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXIS register. +// +//***************************************************************************** +#define USB_RXIS_EP15 0x00008000 // RX Endpoint 15 Interrupt +#define USB_RXIS_EP14 0x00004000 // RX Endpoint 14 Interrupt +#define USB_RXIS_EP13 0x00002000 // RX Endpoint 13 Interrupt +#define USB_RXIS_EP12 0x00001000 // RX Endpoint 12 Interrupt +#define USB_RXIS_EP11 0x00000800 // RX Endpoint 11 Interrupt +#define USB_RXIS_EP10 0x00000400 // RX Endpoint 10 Interrupt +#define USB_RXIS_EP9 0x00000200 // RX Endpoint 9 Interrupt +#define USB_RXIS_EP8 0x00000100 // RX Endpoint 8 Interrupt +#define USB_RXIS_EP7 0x00000080 // RX Endpoint 7 Interrupt +#define USB_RXIS_EP6 0x00000040 // RX Endpoint 6 Interrupt +#define USB_RXIS_EP5 0x00000020 // RX Endpoint 5 Interrupt +#define USB_RXIS_EP4 0x00000010 // RX Endpoint 4 Interrupt +#define USB_RXIS_EP3 0x00000008 // RX Endpoint 3 Interrupt +#define USB_RXIS_EP2 0x00000004 // RX Endpoint 2 Interrupt +#define USB_RXIS_EP1 0x00000002 // RX Endpoint 1 Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXIE register. +// +//***************************************************************************** +#define USB_TXIE_EP15 0x00008000 // TX Endpoint 15 Interrupt Enable +#define USB_TXIE_EP14 0x00004000 // TX Endpoint 14 Interrupt Enable +#define USB_TXIE_EP13 0x00002000 // TX Endpoint 13 Interrupt Enable +#define USB_TXIE_EP12 0x00001000 // TX Endpoint 12 Interrupt Enable +#define USB_TXIE_EP11 0x00000800 // TX Endpoint 11 Interrupt Enable +#define USB_TXIE_EP10 0x00000400 // TX Endpoint 10 Interrupt Enable +#define USB_TXIE_EP9 0x00000200 // TX Endpoint 9 Interrupt Enable +#define USB_TXIE_EP8 0x00000100 // TX Endpoint 8 Interrupt Enable +#define USB_TXIE_EP7 0x00000080 // TX Endpoint 7 Interrupt Enable +#define USB_TXIE_EP6 0x00000040 // TX Endpoint 6 Interrupt Enable +#define USB_TXIE_EP5 0x00000020 // TX Endpoint 5 Interrupt Enable +#define USB_TXIE_EP4 0x00000010 // TX Endpoint 4 Interrupt Enable +#define USB_TXIE_EP3 0x00000008 // TX Endpoint 3 Interrupt Enable +#define USB_TXIE_EP2 0x00000004 // TX Endpoint 2 Interrupt Enable +#define USB_TXIE_EP1 0x00000002 // TX Endpoint 1 Interrupt Enable +#define USB_TXIE_EP0 0x00000001 // TX and RX Endpoint 0 Interrupt + // Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXIE register. +// +//***************************************************************************** +#define USB_RXIE_EP15 0x00008000 // RX Endpoint 15 Interrupt Enable +#define USB_RXIE_EP14 0x00004000 // RX Endpoint 14 Interrupt Enable +#define USB_RXIE_EP13 0x00002000 // RX Endpoint 13 Interrupt Enable +#define USB_RXIE_EP12 0x00001000 // RX Endpoint 12 Interrupt Enable +#define USB_RXIE_EP11 0x00000800 // RX Endpoint 11 Interrupt Enable +#define USB_RXIE_EP10 0x00000400 // RX Endpoint 10 Interrupt Enable +#define USB_RXIE_EP9 0x00000200 // RX Endpoint 9 Interrupt Enable +#define USB_RXIE_EP8 0x00000100 // RX Endpoint 8 Interrupt Enable +#define USB_RXIE_EP7 0x00000080 // RX Endpoint 7 Interrupt Enable +#define USB_RXIE_EP6 0x00000040 // RX Endpoint 6 Interrupt Enable +#define USB_RXIE_EP5 0x00000020 // RX Endpoint 5 Interrupt Enable +#define USB_RXIE_EP4 0x00000010 // RX Endpoint 4 Interrupt Enable +#define USB_RXIE_EP3 0x00000008 // RX Endpoint 3 Interrupt Enable +#define USB_RXIE_EP2 0x00000004 // RX Endpoint 2 Interrupt Enable +#define USB_RXIE_EP1 0x00000002 // RX Endpoint 1 Interrupt Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_IS register. +// +//***************************************************************************** +#define USB_IS_VBUSERR 0x00000080 // VBUS Error +#define USB_IS_SESREQ 0x00000040 // SESSION REQUEST +#define USB_IS_DISCON 0x00000020 // Session Disconnect +#define USB_IS_CONN 0x00000010 // Session Connect +#define USB_IS_SOF 0x00000008 // Start of Frame +#define USB_IS_BABBLE 0x00000004 // Babble Detected +#define USB_IS_RESET 0x00000004 // RESET Signaling Detected +#define USB_IS_RESUME 0x00000002 // RESUME Signaling Detected +#define USB_IS_SUSPEND 0x00000001 // SUSPEND Signaling Detected + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_IE register. +// +//***************************************************************************** +#define USB_IE_VBUSERR 0x00000080 // Enable VBUS Error Interrupt +#define USB_IE_SESREQ 0x00000040 // Enable Session Request +#define USB_IE_DISCON 0x00000020 // Enable Disconnect Interrupt +#define USB_IE_CONN 0x00000010 // Enable Connect Interrupt +#define USB_IE_SOF 0x00000008 // Enable Start-of-Frame Interrupt +#define USB_IE_BABBLE 0x00000004 // Enable Babble Interrupt +#define USB_IE_RESET 0x00000004 // Enable RESET Interrupt +#define USB_IE_RESUME 0x00000002 // Enable RESUME Interrupt +#define USB_IE_SUSPND 0x00000001 // Enable SUSPEND Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FRAME register. +// +//***************************************************************************** +#define USB_FRAME_M 0x000007FF // Frame Number +#define USB_FRAME_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_EPIDX register. +// +//***************************************************************************** +#define USB_EPIDX_EPIDX_M 0x0000000F // Endpoint Index +#define USB_EPIDX_EPIDX_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TEST register. +// +//***************************************************************************** +#define USB_TEST_FORCEH 0x00000080 // Force Host Mode +#define USB_TEST_FIFOACC 0x00000040 // FIFO Access +#define USB_TEST_FORCEFS 0x00000020 // Force Full-Speed Mode + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO0 register. +// +//***************************************************************************** +#define USB_FIFO0_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO0_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO1 register. +// +//***************************************************************************** +#define USB_FIFO1_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO1_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO2 register. +// +//***************************************************************************** +#define USB_FIFO2_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO2_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO3 register. +// +//***************************************************************************** +#define USB_FIFO3_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO3_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO4 register. +// +//***************************************************************************** +#define USB_FIFO4_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO4_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO5 register. +// +//***************************************************************************** +#define USB_FIFO5_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO5_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO6 register. +// +//***************************************************************************** +#define USB_FIFO6_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO6_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO7 register. +// +//***************************************************************************** +#define USB_FIFO7_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO7_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO8 register. +// +//***************************************************************************** +#define USB_FIFO8_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO8_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO9 register. +// +//***************************************************************************** +#define USB_FIFO9_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO9_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO10 register. +// +//***************************************************************************** +#define USB_FIFO10_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO10_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO11 register. +// +//***************************************************************************** +#define USB_FIFO11_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO11_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO12 register. +// +//***************************************************************************** +#define USB_FIFO12_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO12_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO13 register. +// +//***************************************************************************** +#define USB_FIFO13_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO13_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO14 register. +// +//***************************************************************************** +#define USB_FIFO14_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO14_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO15 register. +// +//***************************************************************************** +#define USB_FIFO15_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO15_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DEVCTL register. +// +//***************************************************************************** +#define USB_DEVCTL_DEV 0x00000080 // Device Mode +#define USB_DEVCTL_FSDEV 0x00000040 // Full-Speed Device Detected +#define USB_DEVCTL_LSDEV 0x00000020 // Low-Speed Device Detected +#define USB_DEVCTL_VBUS_M 0x00000018 // VBUS Level +#define USB_DEVCTL_VBUS_NONE 0x00000000 // Below SessionEnd +#define USB_DEVCTL_VBUS_SEND 0x00000008 // Above SessionEnd, below AValid +#define USB_DEVCTL_VBUS_AVALID 0x00000010 // Above AValid, below VBUSValid +#define USB_DEVCTL_VBUS_VALID 0x00000018 // Above VBUSValid +#define USB_DEVCTL_HOST 0x00000004 // Host Mode +#define USB_DEVCTL_HOSTREQ 0x00000002 // Host Request +#define USB_DEVCTL_SESSION 0x00000001 // Session Start/End + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFIFOSZ register. +// +//***************************************************************************** +#define USB_TXFIFOSZ_DPB 0x00000010 // Double Packet Buffer Support +#define USB_TXFIFOSZ_SIZE_M 0x0000000F // Max Packet Size +#define USB_TXFIFOSZ_SIZE_8 0x00000000 // 8 +#define USB_TXFIFOSZ_SIZE_16 0x00000001 // 16 +#define USB_TXFIFOSZ_SIZE_32 0x00000002 // 32 +#define USB_TXFIFOSZ_SIZE_64 0x00000003 // 64 +#define USB_TXFIFOSZ_SIZE_128 0x00000004 // 128 +#define USB_TXFIFOSZ_SIZE_256 0x00000005 // 256 +#define USB_TXFIFOSZ_SIZE_512 0x00000006 // 512 +#define USB_TXFIFOSZ_SIZE_1024 0x00000007 // 1024 +#define USB_TXFIFOSZ_SIZE_2048 0x00000008 // 2048 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFIFOSZ register. +// +//***************************************************************************** +#define USB_RXFIFOSZ_DPB 0x00000010 // Double Packet Buffer Support +#define USB_RXFIFOSZ_SIZE_M 0x0000000F // Max Packet Size +#define USB_RXFIFOSZ_SIZE_8 0x00000000 // 8 +#define USB_RXFIFOSZ_SIZE_16 0x00000001 // 16 +#define USB_RXFIFOSZ_SIZE_32 0x00000002 // 32 +#define USB_RXFIFOSZ_SIZE_64 0x00000003 // 64 +#define USB_RXFIFOSZ_SIZE_128 0x00000004 // 128 +#define USB_RXFIFOSZ_SIZE_256 0x00000005 // 256 +#define USB_RXFIFOSZ_SIZE_512 0x00000006 // 512 +#define USB_RXFIFOSZ_SIZE_1024 0x00000007 // 1024 +#define USB_RXFIFOSZ_SIZE_2048 0x00000008 // 2048 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFIFOADD +// register. +// +//***************************************************************************** +#define USB_TXFIFOADD_ADDR_M 0x000001FF // Transmit/Receive Start Address +#define USB_TXFIFOADD_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFIFOADD +// register. +// +//***************************************************************************** +#define USB_RXFIFOADD_ADDR_M 0x000001FF // Transmit/Receive Start Address +#define USB_RXFIFOADD_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_CONTIM register. +// +//***************************************************************************** +#define USB_CONTIM_WTCON_M 0x000000F0 // Connect Wait +#define USB_CONTIM_WTID_M 0x0000000F // Wait ID +#define USB_CONTIM_WTCON_S 4 +#define USB_CONTIM_WTID_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_VPLEN register. +// +//***************************************************************************** +#define USB_VPLEN_VPLEN_M 0x000000FF // VBUS Pulse Length +#define USB_VPLEN_VPLEN_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FSEOF register. +// +//***************************************************************************** +#define USB_FSEOF_FSEOFG_M 0x000000FF // Full-Speed End-of-Frame Gap +#define USB_FSEOF_FSEOFG_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_LSEOF register. +// +//***************************************************************************** +#define USB_LSEOF_LSEOFG_M 0x000000FF // Low-Speed End-of-Frame Gap +#define USB_LSEOF_LSEOFG_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR0 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR0_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR0_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR0 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR0_MULTTRAN 0x00000080 // Multiple Translators +#define USB_TXHUBADDR0_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR0_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT0 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT0_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT0_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR1 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR1_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR1_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR1 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR1_MULTTRAN 0x00000080 // Multiple Translators +#define USB_TXHUBADDR1_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR1_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT1 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT1_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT1_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFUNCADDR1 +// register. +// +//***************************************************************************** +#define USB_RXFUNCADDR1_ADDR_M 0x0000007F // Device Address +#define USB_RXFUNCADDR1_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBADDR1 +// register. +// +//***************************************************************************** +#define USB_RXHUBADDR1_MULTTRAN 0x00000080 // Multiple Translators +#define USB_RXHUBADDR1_ADDR_M 0x0000007F // Hub Address +#define USB_RXHUBADDR1_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBPORT1 +// register. +// +//***************************************************************************** +#define USB_RXHUBPORT1_PORT_M 0x0000007F // Hub Port +#define USB_RXHUBPORT1_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR2 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR2_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR2_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR2 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR2_MULTTRAN 0x00000080 // Multiple Translators +#define USB_TXHUBADDR2_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR2_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT2 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT2_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT2_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFUNCADDR2 +// register. +// +//***************************************************************************** +#define USB_RXFUNCADDR2_ADDR_M 0x0000007F // Device Address +#define USB_RXFUNCADDR2_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBADDR2 +// register. +// +//***************************************************************************** +#define USB_RXHUBADDR2_MULTTRAN 0x00000080 // Multiple Translators +#define USB_RXHUBADDR2_ADDR_M 0x0000007F // Hub Address +#define USB_RXHUBADDR2_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBPORT2 +// register. +// +//***************************************************************************** +#define USB_RXHUBPORT2_PORT_M 0x0000007F // Hub Port +#define USB_RXHUBPORT2_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR3 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR3_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR3_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR3 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR3_MULTTRAN 0x00000080 // Multiple Translators +#define USB_TXHUBADDR3_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR3_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT3 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT3_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT3_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFUNCADDR3 +// register. +// +//***************************************************************************** +#define USB_RXFUNCADDR3_ADDR_M 0x0000007F // Device Address +#define USB_RXFUNCADDR3_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBADDR3 +// register. +// +//***************************************************************************** +#define USB_RXHUBADDR3_MULTTRAN 0x00000080 // Multiple Translators +#define USB_RXHUBADDR3_ADDR_M 0x0000007F // Hub Address +#define USB_RXHUBADDR3_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBPORT3 +// register. +// +//***************************************************************************** +#define USB_RXHUBPORT3_PORT_M 0x0000007F // Hub Port +#define USB_RXHUBPORT3_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR4 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR4_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR4_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR4 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR4_MULTTRAN 0x00000080 // Multiple Translators +#define USB_TXHUBADDR4_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR4_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT4 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT4_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT4_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFUNCADDR4 +// register. +// +//***************************************************************************** +#define USB_RXFUNCADDR4_ADDR_M 0x0000007F // Device Address +#define USB_RXFUNCADDR4_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBADDR4 +// register. +// +//***************************************************************************** +#define USB_RXHUBADDR4_MULTTRAN 0x00000080 // Multiple Translators +#define USB_RXHUBADDR4_ADDR_M 0x0000007F // Hub Address +#define USB_RXHUBADDR4_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBPORT4 +// register. +// +//***************************************************************************** +#define USB_RXHUBPORT4_PORT_M 0x0000007F // Hub Port +#define USB_RXHUBPORT4_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR5 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR5_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR5_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR5 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR5_MULTTRAN 0x00000080 // Multiple Translators +#define USB_TXHUBADDR5_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR5_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT5 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT5_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT5_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFUNCADDR5 +// register. +// +//***************************************************************************** +#define USB_RXFUNCADDR5_ADDR_M 0x0000007F // Device Address +#define USB_RXFUNCADDR5_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBADDR5 +// register. +// +//***************************************************************************** +#define USB_RXHUBADDR5_MULTTRAN 0x00000080 // Multiple Translators +#define USB_RXHUBADDR5_ADDR_M 0x0000007F // Hub Address +#define USB_RXHUBADDR5_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBPORT5 +// register. +// +//***************************************************************************** +#define USB_RXHUBPORT5_PORT_M 0x0000007F // Hub Port +#define USB_RXHUBPORT5_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR6 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR6_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR6_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR6 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR6_MULTTRAN 0x00000080 // Multiple Translators +#define USB_TXHUBADDR6_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR6_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT6 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT6_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT6_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFUNCADDR6 +// register. +// +//***************************************************************************** +#define USB_RXFUNCADDR6_ADDR_M 0x0000007F // Device Address +#define USB_RXFUNCADDR6_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBADDR6 +// register. +// +//***************************************************************************** +#define USB_RXHUBADDR6_MULTTRAN 0x00000080 // Multiple Translators +#define USB_RXHUBADDR6_ADDR_M 0x0000007F // Hub Address +#define USB_RXHUBADDR6_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBPORT6 +// register. +// +//***************************************************************************** +#define USB_RXHUBPORT6_PORT_M 0x0000007F // Hub Port +#define USB_RXHUBPORT6_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR7 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR7_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR7_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR7 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR7_MULTTRAN 0x00000080 // Multiple Translators +#define USB_TXHUBADDR7_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR7_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT7 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT7_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT7_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFUNCADDR7 +// register. +// +//***************************************************************************** +#define USB_RXFUNCADDR7_ADDR_M 0x0000007F // Device Address +#define USB_RXFUNCADDR7_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBADDR7 +// register. +// +//***************************************************************************** +#define USB_RXHUBADDR7_MULTTRAN 0x00000080 // Multiple Translators +#define USB_RXHUBADDR7_ADDR_M 0x0000007F // Hub Address +#define USB_RXHUBADDR7_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBPORT7 +// register. +// +//***************************************************************************** +#define USB_RXHUBPORT7_PORT_M 0x0000007F // Hub Port +#define USB_RXHUBPORT7_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR8 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR8_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR8_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR8 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR8_MULTTRAN 0x00000080 // Multiple Translators +#define USB_TXHUBADDR8_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR8_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT8 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT8_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT8_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFUNCADDR8 +// register. +// +//***************************************************************************** +#define USB_RXFUNCADDR8_ADDR_M 0x0000007F // Device Address +#define USB_RXFUNCADDR8_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBADDR8 +// register. +// +//***************************************************************************** +#define USB_RXHUBADDR8_MULTTRAN 0x00000080 // Multiple Translators +#define USB_RXHUBADDR8_ADDR_M 0x0000007F // Hub Address +#define USB_RXHUBADDR8_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBPORT8 +// register. +// +//***************************************************************************** +#define USB_RXHUBPORT8_PORT_M 0x0000007F // Hub Port +#define USB_RXHUBPORT8_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR9 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR9_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR9_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR9 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR9_MULTTRAN 0x00000080 // Multiple Translators +#define USB_TXHUBADDR9_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR9_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT9 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT9_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT9_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFUNCADDR9 +// register. +// +//***************************************************************************** +#define USB_RXFUNCADDR9_ADDR_M 0x0000007F // Device Address +#define USB_RXFUNCADDR9_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBADDR9 +// register. +// +//***************************************************************************** +#define USB_RXHUBADDR9_MULTTRAN 0x00000080 // Multiple Translators +#define USB_RXHUBADDR9_ADDR_M 0x0000007F // Hub Address +#define USB_RXHUBADDR9_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBPORT9 +// register. +// +//***************************************************************************** +#define USB_RXHUBPORT9_PORT_M 0x0000007F // Hub Port +#define USB_RXHUBPORT9_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR10 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR10_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR10_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR10 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR10_MULTTRAN \ + 0x00000080 // Multiple Translators +#define USB_TXHUBADDR10_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR10_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT10 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT10_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT10_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFUNCADDR10 +// register. +// +//***************************************************************************** +#define USB_RXFUNCADDR10_ADDR_M 0x0000007F // Device Address +#define USB_RXFUNCADDR10_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBADDR10 +// register. +// +//***************************************************************************** +#define USB_RXHUBADDR10_MULTTRAN \ + 0x00000080 // Multiple Translators +#define USB_RXHUBADDR10_ADDR_M 0x0000007F // Hub Address +#define USB_RXHUBADDR10_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBPORT10 +// register. +// +//***************************************************************************** +#define USB_RXHUBPORT10_PORT_M 0x0000007F // Hub Port +#define USB_RXHUBPORT10_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR11 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR11_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR11_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR11 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR11_MULTTRAN \ + 0x00000080 // Multiple Translators +#define USB_TXHUBADDR11_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR11_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT11 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT11_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT11_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFUNCADDR11 +// register. +// +//***************************************************************************** +#define USB_RXFUNCADDR11_ADDR_M 0x0000007F // Device Address +#define USB_RXFUNCADDR11_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBADDR11 +// register. +// +//***************************************************************************** +#define USB_RXHUBADDR11_MULTTRAN \ + 0x00000080 // Multiple Translators +#define USB_RXHUBADDR11_ADDR_M 0x0000007F // Hub Address +#define USB_RXHUBADDR11_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBPORT11 +// register. +// +//***************************************************************************** +#define USB_RXHUBPORT11_PORT_M 0x0000007F // Hub Port +#define USB_RXHUBPORT11_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR12 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR12_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR12_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR12 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR12_MULTTRAN \ + 0x00000080 // Multiple Translators +#define USB_TXHUBADDR12_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR12_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT12 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT12_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT12_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFUNCADDR12 +// register. +// +//***************************************************************************** +#define USB_RXFUNCADDR12_ADDR_M 0x0000007F // Device Address +#define USB_RXFUNCADDR12_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBADDR12 +// register. +// +//***************************************************************************** +#define USB_RXHUBADDR12_MULTTRAN \ + 0x00000080 // Multiple Translators +#define USB_RXHUBADDR12_ADDR_M 0x0000007F // Hub Address +#define USB_RXHUBADDR12_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBPORT12 +// register. +// +//***************************************************************************** +#define USB_RXHUBPORT12_PORT_M 0x0000007F // Hub Port +#define USB_RXHUBPORT12_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR13 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR13_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR13_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR13 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR13_MULTTRAN \ + 0x00000080 // Multiple Translators +#define USB_TXHUBADDR13_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR13_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT13 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT13_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT13_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFUNCADDR13 +// register. +// +//***************************************************************************** +#define USB_RXFUNCADDR13_ADDR_M 0x0000007F // Device Address +#define USB_RXFUNCADDR13_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBADDR13 +// register. +// +//***************************************************************************** +#define USB_RXHUBADDR13_MULTTRAN \ + 0x00000080 // Multiple Translators +#define USB_RXHUBADDR13_ADDR_M 0x0000007F // Hub Address +#define USB_RXHUBADDR13_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBPORT13 +// register. +// +//***************************************************************************** +#define USB_RXHUBPORT13_PORT_M 0x0000007F // Hub Port +#define USB_RXHUBPORT13_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR14 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR14_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR14_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR14 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR14_MULTTRAN \ + 0x00000080 // Multiple Translators +#define USB_TXHUBADDR14_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR14_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT14 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT14_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT14_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFUNCADDR14 +// register. +// +//***************************************************************************** +#define USB_RXFUNCADDR14_ADDR_M 0x0000007F // Device Address +#define USB_RXFUNCADDR14_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBADDR14 +// register. +// +//***************************************************************************** +#define USB_RXHUBADDR14_MULTTRAN \ + 0x00000080 // Multiple Translators +#define USB_RXHUBADDR14_ADDR_M 0x0000007F // Hub Address +#define USB_RXHUBADDR14_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBPORT14 +// register. +// +//***************************************************************************** +#define USB_RXHUBPORT14_PORT_M 0x0000007F // Hub Port +#define USB_RXHUBPORT14_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR15 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR15_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR15_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR15 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR15_MULTTRAN \ + 0x00000080 // Multiple Translators +#define USB_TXHUBADDR15_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR15_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT15 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT15_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT15_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFUNCADDR15 +// register. +// +//***************************************************************************** +#define USB_RXFUNCADDR15_ADDR_M 0x0000007F // Device Address +#define USB_RXFUNCADDR15_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBADDR15 +// register. +// +//***************************************************************************** +#define USB_RXHUBADDR15_MULTTRAN \ + 0x00000080 // Multiple Translators +#define USB_RXHUBADDR15_ADDR_M 0x0000007F // Hub Address +#define USB_RXHUBADDR15_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBPORT15 +// register. +// +//***************************************************************************** +#define USB_RXHUBPORT15_PORT_M 0x0000007F // Hub Port +#define USB_RXHUBPORT15_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_CSRL0 register. +// +//***************************************************************************** +#define USB_CSRL0_NAKTO 0x00000080 // NAK Timeout +#define USB_CSRL0_SETENDC 0x00000080 // Setup End Clear +#define USB_CSRL0_STATUS 0x00000040 // STATUS Packet +#define USB_CSRL0_RXRDYC 0x00000040 // RXRDY Clear +#define USB_CSRL0_REQPKT 0x00000020 // Request Packet +#define USB_CSRL0_STALL 0x00000020 // Send Stall +#define USB_CSRL0_SETEND 0x00000010 // Setup End +#define USB_CSRL0_ERROR 0x00000010 // Error +#define USB_CSRL0_DATAEND 0x00000008 // Data End +#define USB_CSRL0_SETUP 0x00000008 // Setup Packet +#define USB_CSRL0_STALLED 0x00000004 // Endpoint Stalled +#define USB_CSRL0_TXRDY 0x00000002 // Transmit Packet Ready +#define USB_CSRL0_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_CSRH0 register. +// +//***************************************************************************** +#define USB_CSRH0_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_CSRH0_DT 0x00000002 // Data Toggle +#define USB_CSRH0_FLUSH 0x00000001 // Flush FIFO + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_COUNT0 register. +// +//***************************************************************************** +#define USB_COUNT0_COUNT_M 0x0000007F // FIFO Count +#define USB_COUNT0_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TYPE0 register. +// +//***************************************************************************** +#define USB_TYPE0_SPEED_M 0x000000C0 // Operating Speed +#define USB_TYPE0_SPEED_FULL 0x00000080 // Full +#define USB_TYPE0_SPEED_LOW 0x000000C0 // Low + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_NAKLMT register. +// +//***************************************************************************** +#define USB_NAKLMT_NAKLMT_M 0x0000001F // EP0 NAK Limit +#define USB_NAKLMT_NAKLMT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXMAXP1 register. +// +//***************************************************************************** +#define USB_TXMAXP1_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_TXMAXP1_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRL1 register. +// +//***************************************************************************** +#define USB_TXCSRL1_NAKTO 0x00000080 // NAK Timeout +#define USB_TXCSRL1_CLRDT 0x00000040 // Clear Data Toggle +#define USB_TXCSRL1_STALLED 0x00000020 // Endpoint Stalled +#define USB_TXCSRL1_STALL 0x00000010 // Send STALL +#define USB_TXCSRL1_SETUP 0x00000010 // Setup Packet +#define USB_TXCSRL1_FLUSH 0x00000008 // Flush FIFO +#define USB_TXCSRL1_ERROR 0x00000004 // Error +#define USB_TXCSRL1_UNDRN 0x00000004 // Underrun +#define USB_TXCSRL1_FIFONE 0x00000002 // FIFO Not Empty +#define USB_TXCSRL1_TXRDY 0x00000001 // Transmit Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRH1 register. +// +//***************************************************************************** +#define USB_TXCSRH1_AUTOSET 0x00000080 // Auto Set +#define USB_TXCSRH1_ISO 0x00000040 // Isochronous Transfers +#define USB_TXCSRH1_MODE 0x00000020 // Mode +#define USB_TXCSRH1_DMAEN 0x00000010 // DMA Request Enable +#define USB_TXCSRH1_FDT 0x00000008 // Force Data Toggle +#define USB_TXCSRH1_DMAMOD 0x00000004 // DMA Request Mode +#define USB_TXCSRH1_DTWE 0x00000002 // Data Toggle Write Enable +#define USB_TXCSRH1_DT 0x00000001 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXMAXP1 register. +// +//***************************************************************************** +#define USB_RXMAXP1_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_RXMAXP1_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRL1 register. +// +//***************************************************************************** +#define USB_RXCSRL1_CLRDT 0x00000080 // Clear Data Toggle +#define USB_RXCSRL1_STALLED 0x00000040 // Endpoint Stalled +#define USB_RXCSRL1_STALL 0x00000020 // Send STALL +#define USB_RXCSRL1_REQPKT 0x00000020 // Request Packet +#define USB_RXCSRL1_FLUSH 0x00000010 // Flush FIFO +#define USB_RXCSRL1_DATAERR 0x00000008 // Data Error +#define USB_RXCSRL1_NAKTO 0x00000008 // NAK Timeout +#define USB_RXCSRL1_OVER 0x00000004 // Overrun +#define USB_RXCSRL1_ERROR 0x00000004 // Error +#define USB_RXCSRL1_FULL 0x00000002 // FIFO Full +#define USB_RXCSRL1_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRH1 register. +// +//***************************************************************************** +#define USB_RXCSRH1_AUTOCL 0x00000080 // Auto Clear +#define USB_RXCSRH1_AUTORQ 0x00000040 // Auto Request +#define USB_RXCSRH1_ISO 0x00000040 // Isochronous Transfers +#define USB_RXCSRH1_DMAEN 0x00000020 // DMA Request Enable +#define USB_RXCSRH1_DISNYET 0x00000010 // Disable NYET +#define USB_RXCSRH1_PIDERR 0x00000010 // PID Error +#define USB_RXCSRH1_DMAMOD 0x00000008 // DMA Request Mode +#define USB_RXCSRH1_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_RXCSRH1_DT 0x00000002 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCOUNT1 register. +// +//***************************************************************************** +#define USB_RXCOUNT1_COUNT_M 0x00001FFF // Receive Packet Count +#define USB_RXCOUNT1_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXTYPE1 register. +// +//***************************************************************************** +#define USB_TXTYPE1_SPEED_M 0x000000C0 // Operating Speed +#define USB_TXTYPE1_SPEED_DFLT 0x00000000 // Default +#define USB_TXTYPE1_SPEED_FULL 0x00000080 // Full +#define USB_TXTYPE1_SPEED_LOW 0x000000C0 // Low +#define USB_TXTYPE1_PROTO_M 0x00000030 // Protocol +#define USB_TXTYPE1_PROTO_CTRL 0x00000000 // Control +#define USB_TXTYPE1_PROTO_ISOC 0x00000010 // Isochronous +#define USB_TXTYPE1_PROTO_BULK 0x00000020 // Bulk +#define USB_TXTYPE1_PROTO_INT 0x00000030 // Interrupt +#define USB_TXTYPE1_TEP_M 0x0000000F // Target Endpoint Number +#define USB_TXTYPE1_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXINTERVAL1 +// register. +// +//***************************************************************************** +#define USB_TXINTERVAL1_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_TXINTERVAL1_TXPOLL_M \ + 0x000000FF // TX Polling +#define USB_TXINTERVAL1_TXPOLL_S \ + 0 +#define USB_TXINTERVAL1_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXTYPE1 register. +// +//***************************************************************************** +#define USB_RXTYPE1_SPEED_M 0x000000C0 // Operating Speed +#define USB_RXTYPE1_SPEED_DFLT 0x00000000 // Default +#define USB_RXTYPE1_SPEED_FULL 0x00000080 // Full +#define USB_RXTYPE1_SPEED_LOW 0x000000C0 // Low +#define USB_RXTYPE1_PROTO_M 0x00000030 // Protocol +#define USB_RXTYPE1_PROTO_CTRL 0x00000000 // Control +#define USB_RXTYPE1_PROTO_ISOC 0x00000010 // Isochronous +#define USB_RXTYPE1_PROTO_BULK 0x00000020 // Bulk +#define USB_RXTYPE1_PROTO_INT 0x00000030 // Interrupt +#define USB_RXTYPE1_TEP_M 0x0000000F // Target Endpoint Number +#define USB_RXTYPE1_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXINTERVAL1 +// register. +// +//***************************************************************************** +#define USB_RXINTERVAL1_TXPOLL_M \ + 0x000000FF // RX Polling +#define USB_RXINTERVAL1_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_RXINTERVAL1_TXPOLL_S \ + 0 +#define USB_RXINTERVAL1_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXMAXP2 register. +// +//***************************************************************************** +#define USB_TXMAXP2_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_TXMAXP2_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRL2 register. +// +//***************************************************************************** +#define USB_TXCSRL2_NAKTO 0x00000080 // NAK Timeout +#define USB_TXCSRL2_CLRDT 0x00000040 // Clear Data Toggle +#define USB_TXCSRL2_STALLED 0x00000020 // Endpoint Stalled +#define USB_TXCSRL2_SETUP 0x00000010 // Setup Packet +#define USB_TXCSRL2_STALL 0x00000010 // Send STALL +#define USB_TXCSRL2_FLUSH 0x00000008 // Flush FIFO +#define USB_TXCSRL2_ERROR 0x00000004 // Error +#define USB_TXCSRL2_UNDRN 0x00000004 // Underrun +#define USB_TXCSRL2_FIFONE 0x00000002 // FIFO Not Empty +#define USB_TXCSRL2_TXRDY 0x00000001 // Transmit Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRH2 register. +// +//***************************************************************************** +#define USB_TXCSRH2_AUTOSET 0x00000080 // Auto Set +#define USB_TXCSRH2_ISO 0x00000040 // Isochronous Transfers +#define USB_TXCSRH2_MODE 0x00000020 // Mode +#define USB_TXCSRH2_DMAEN 0x00000010 // DMA Request Enable +#define USB_TXCSRH2_FDT 0x00000008 // Force Data Toggle +#define USB_TXCSRH2_DMAMOD 0x00000004 // DMA Request Mode +#define USB_TXCSRH2_DTWE 0x00000002 // Data Toggle Write Enable +#define USB_TXCSRH2_DT 0x00000001 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXMAXP2 register. +// +//***************************************************************************** +#define USB_RXMAXP2_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_RXMAXP2_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRL2 register. +// +//***************************************************************************** +#define USB_RXCSRL2_CLRDT 0x00000080 // Clear Data Toggle +#define USB_RXCSRL2_STALLED 0x00000040 // Endpoint Stalled +#define USB_RXCSRL2_REQPKT 0x00000020 // Request Packet +#define USB_RXCSRL2_STALL 0x00000020 // Send STALL +#define USB_RXCSRL2_FLUSH 0x00000010 // Flush FIFO +#define USB_RXCSRL2_DATAERR 0x00000008 // Data Error +#define USB_RXCSRL2_NAKTO 0x00000008 // NAK Timeout +#define USB_RXCSRL2_ERROR 0x00000004 // Error +#define USB_RXCSRL2_OVER 0x00000004 // Overrun +#define USB_RXCSRL2_FULL 0x00000002 // FIFO Full +#define USB_RXCSRL2_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRH2 register. +// +//***************************************************************************** +#define USB_RXCSRH2_AUTOCL 0x00000080 // Auto Clear +#define USB_RXCSRH2_AUTORQ 0x00000040 // Auto Request +#define USB_RXCSRH2_ISO 0x00000040 // Isochronous Transfers +#define USB_RXCSRH2_DMAEN 0x00000020 // DMA Request Enable +#define USB_RXCSRH2_DISNYET 0x00000010 // Disable NYET +#define USB_RXCSRH2_PIDERR 0x00000010 // PID Error +#define USB_RXCSRH2_DMAMOD 0x00000008 // DMA Request Mode +#define USB_RXCSRH2_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_RXCSRH2_DT 0x00000002 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCOUNT2 register. +// +//***************************************************************************** +#define USB_RXCOUNT2_COUNT_M 0x00001FFF // Receive Packet Count +#define USB_RXCOUNT2_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXTYPE2 register. +// +//***************************************************************************** +#define USB_TXTYPE2_SPEED_M 0x000000C0 // Operating Speed +#define USB_TXTYPE2_SPEED_DFLT 0x00000000 // Default +#define USB_TXTYPE2_SPEED_FULL 0x00000080 // Full +#define USB_TXTYPE2_SPEED_LOW 0x000000C0 // Low +#define USB_TXTYPE2_PROTO_M 0x00000030 // Protocol +#define USB_TXTYPE2_PROTO_CTRL 0x00000000 // Control +#define USB_TXTYPE2_PROTO_ISOC 0x00000010 // Isochronous +#define USB_TXTYPE2_PROTO_BULK 0x00000020 // Bulk +#define USB_TXTYPE2_PROTO_INT 0x00000030 // Interrupt +#define USB_TXTYPE2_TEP_M 0x0000000F // Target Endpoint Number +#define USB_TXTYPE2_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXINTERVAL2 +// register. +// +//***************************************************************************** +#define USB_TXINTERVAL2_TXPOLL_M \ + 0x000000FF // TX Polling +#define USB_TXINTERVAL2_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_TXINTERVAL2_NAKLMT_S \ + 0 +#define USB_TXINTERVAL2_TXPOLL_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXTYPE2 register. +// +//***************************************************************************** +#define USB_RXTYPE2_SPEED_M 0x000000C0 // Operating Speed +#define USB_RXTYPE2_SPEED_DFLT 0x00000000 // Default +#define USB_RXTYPE2_SPEED_FULL 0x00000080 // Full +#define USB_RXTYPE2_SPEED_LOW 0x000000C0 // Low +#define USB_RXTYPE2_PROTO_M 0x00000030 // Protocol +#define USB_RXTYPE2_PROTO_CTRL 0x00000000 // Control +#define USB_RXTYPE2_PROTO_ISOC 0x00000010 // Isochronous +#define USB_RXTYPE2_PROTO_BULK 0x00000020 // Bulk +#define USB_RXTYPE2_PROTO_INT 0x00000030 // Interrupt +#define USB_RXTYPE2_TEP_M 0x0000000F // Target Endpoint Number +#define USB_RXTYPE2_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXINTERVAL2 +// register. +// +//***************************************************************************** +#define USB_RXINTERVAL2_TXPOLL_M \ + 0x000000FF // RX Polling +#define USB_RXINTERVAL2_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_RXINTERVAL2_TXPOLL_S \ + 0 +#define USB_RXINTERVAL2_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXMAXP3 register. +// +//***************************************************************************** +#define USB_TXMAXP3_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_TXMAXP3_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRL3 register. +// +//***************************************************************************** +#define USB_TXCSRL3_NAKTO 0x00000080 // NAK Timeout +#define USB_TXCSRL3_CLRDT 0x00000040 // Clear Data Toggle +#define USB_TXCSRL3_STALLED 0x00000020 // Endpoint Stalled +#define USB_TXCSRL3_SETUP 0x00000010 // Setup Packet +#define USB_TXCSRL3_STALL 0x00000010 // Send STALL +#define USB_TXCSRL3_FLUSH 0x00000008 // Flush FIFO +#define USB_TXCSRL3_ERROR 0x00000004 // Error +#define USB_TXCSRL3_UNDRN 0x00000004 // Underrun +#define USB_TXCSRL3_FIFONE 0x00000002 // FIFO Not Empty +#define USB_TXCSRL3_TXRDY 0x00000001 // Transmit Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRH3 register. +// +//***************************************************************************** +#define USB_TXCSRH3_AUTOSET 0x00000080 // Auto Set +#define USB_TXCSRH3_ISO 0x00000040 // Isochronous Transfers +#define USB_TXCSRH3_MODE 0x00000020 // Mode +#define USB_TXCSRH3_DMAEN 0x00000010 // DMA Request Enable +#define USB_TXCSRH3_FDT 0x00000008 // Force Data Toggle +#define USB_TXCSRH3_DMAMOD 0x00000004 // DMA Request Mode +#define USB_TXCSRH3_DTWE 0x00000002 // Data Toggle Write Enable +#define USB_TXCSRH3_DT 0x00000001 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXMAXP3 register. +// +//***************************************************************************** +#define USB_RXMAXP3_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_RXMAXP3_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRL3 register. +// +//***************************************************************************** +#define USB_RXCSRL3_CLRDT 0x00000080 // Clear Data Toggle +#define USB_RXCSRL3_STALLED 0x00000040 // Endpoint Stalled +#define USB_RXCSRL3_STALL 0x00000020 // Send STALL +#define USB_RXCSRL3_REQPKT 0x00000020 // Request Packet +#define USB_RXCSRL3_FLUSH 0x00000010 // Flush FIFO +#define USB_RXCSRL3_DATAERR 0x00000008 // Data Error +#define USB_RXCSRL3_NAKTO 0x00000008 // NAK Timeout +#define USB_RXCSRL3_ERROR 0x00000004 // Error +#define USB_RXCSRL3_OVER 0x00000004 // Overrun +#define USB_RXCSRL3_FULL 0x00000002 // FIFO Full +#define USB_RXCSRL3_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRH3 register. +// +//***************************************************************************** +#define USB_RXCSRH3_AUTOCL 0x00000080 // Auto Clear +#define USB_RXCSRH3_AUTORQ 0x00000040 // Auto Request +#define USB_RXCSRH3_ISO 0x00000040 // Isochronous Transfers +#define USB_RXCSRH3_DMAEN 0x00000020 // DMA Request Enable +#define USB_RXCSRH3_DISNYET 0x00000010 // Disable NYET +#define USB_RXCSRH3_PIDERR 0x00000010 // PID Error +#define USB_RXCSRH3_DMAMOD 0x00000008 // DMA Request Mode +#define USB_RXCSRH3_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_RXCSRH3_DT 0x00000002 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCOUNT3 register. +// +//***************************************************************************** +#define USB_RXCOUNT3_COUNT_M 0x00001FFF // Receive Packet Count +#define USB_RXCOUNT3_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXTYPE3 register. +// +//***************************************************************************** +#define USB_TXTYPE3_SPEED_M 0x000000C0 // Operating Speed +#define USB_TXTYPE3_SPEED_DFLT 0x00000000 // Default +#define USB_TXTYPE3_SPEED_FULL 0x00000080 // Full +#define USB_TXTYPE3_SPEED_LOW 0x000000C0 // Low +#define USB_TXTYPE3_PROTO_M 0x00000030 // Protocol +#define USB_TXTYPE3_PROTO_CTRL 0x00000000 // Control +#define USB_TXTYPE3_PROTO_ISOC 0x00000010 // Isochronous +#define USB_TXTYPE3_PROTO_BULK 0x00000020 // Bulk +#define USB_TXTYPE3_PROTO_INT 0x00000030 // Interrupt +#define USB_TXTYPE3_TEP_M 0x0000000F // Target Endpoint Number +#define USB_TXTYPE3_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXINTERVAL3 +// register. +// +//***************************************************************************** +#define USB_TXINTERVAL3_TXPOLL_M \ + 0x000000FF // TX Polling +#define USB_TXINTERVAL3_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_TXINTERVAL3_TXPOLL_S \ + 0 +#define USB_TXINTERVAL3_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXTYPE3 register. +// +//***************************************************************************** +#define USB_RXTYPE3_SPEED_M 0x000000C0 // Operating Speed +#define USB_RXTYPE3_SPEED_DFLT 0x00000000 // Default +#define USB_RXTYPE3_SPEED_FULL 0x00000080 // Full +#define USB_RXTYPE3_SPEED_LOW 0x000000C0 // Low +#define USB_RXTYPE3_PROTO_M 0x00000030 // Protocol +#define USB_RXTYPE3_PROTO_CTRL 0x00000000 // Control +#define USB_RXTYPE3_PROTO_ISOC 0x00000010 // Isochronous +#define USB_RXTYPE3_PROTO_BULK 0x00000020 // Bulk +#define USB_RXTYPE3_PROTO_INT 0x00000030 // Interrupt +#define USB_RXTYPE3_TEP_M 0x0000000F // Target Endpoint Number +#define USB_RXTYPE3_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXINTERVAL3 +// register. +// +//***************************************************************************** +#define USB_RXINTERVAL3_TXPOLL_M \ + 0x000000FF // RX Polling +#define USB_RXINTERVAL3_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_RXINTERVAL3_TXPOLL_S \ + 0 +#define USB_RXINTERVAL3_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXMAXP4 register. +// +//***************************************************************************** +#define USB_TXMAXP4_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_TXMAXP4_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRL4 register. +// +//***************************************************************************** +#define USB_TXCSRL4_NAKTO 0x00000080 // NAK Timeout +#define USB_TXCSRL4_CLRDT 0x00000040 // Clear Data Toggle +#define USB_TXCSRL4_STALLED 0x00000020 // Endpoint Stalled +#define USB_TXCSRL4_SETUP 0x00000010 // Setup Packet +#define USB_TXCSRL4_STALL 0x00000010 // Send STALL +#define USB_TXCSRL4_FLUSH 0x00000008 // Flush FIFO +#define USB_TXCSRL4_ERROR 0x00000004 // Error +#define USB_TXCSRL4_UNDRN 0x00000004 // Underrun +#define USB_TXCSRL4_FIFONE 0x00000002 // FIFO Not Empty +#define USB_TXCSRL4_TXRDY 0x00000001 // Transmit Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRH4 register. +// +//***************************************************************************** +#define USB_TXCSRH4_AUTOSET 0x00000080 // Auto Set +#define USB_TXCSRH4_ISO 0x00000040 // Isochronous Transfers +#define USB_TXCSRH4_MODE 0x00000020 // Mode +#define USB_TXCSRH4_DMAEN 0x00000010 // DMA Request Enable +#define USB_TXCSRH4_FDT 0x00000008 // Force Data Toggle +#define USB_TXCSRH4_DMAMOD 0x00000004 // DMA Request Mode +#define USB_TXCSRH4_DTWE 0x00000002 // Data Toggle Write Enable +#define USB_TXCSRH4_DT 0x00000001 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXMAXP4 register. +// +//***************************************************************************** +#define USB_RXMAXP4_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_RXMAXP4_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRL4 register. +// +//***************************************************************************** +#define USB_RXCSRL4_CLRDT 0x00000080 // Clear Data Toggle +#define USB_RXCSRL4_STALLED 0x00000040 // Endpoint Stalled +#define USB_RXCSRL4_STALL 0x00000020 // Send STALL +#define USB_RXCSRL4_REQPKT 0x00000020 // Request Packet +#define USB_RXCSRL4_FLUSH 0x00000010 // Flush FIFO +#define USB_RXCSRL4_NAKTO 0x00000008 // NAK Timeout +#define USB_RXCSRL4_DATAERR 0x00000008 // Data Error +#define USB_RXCSRL4_OVER 0x00000004 // Overrun +#define USB_RXCSRL4_ERROR 0x00000004 // Error +#define USB_RXCSRL4_FULL 0x00000002 // FIFO Full +#define USB_RXCSRL4_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRH4 register. +// +//***************************************************************************** +#define USB_RXCSRH4_AUTOCL 0x00000080 // Auto Clear +#define USB_RXCSRH4_AUTORQ 0x00000040 // Auto Request +#define USB_RXCSRH4_ISO 0x00000040 // Isochronous Transfers +#define USB_RXCSRH4_DMAEN 0x00000020 // DMA Request Enable +#define USB_RXCSRH4_DISNYET 0x00000010 // Disable NYET +#define USB_RXCSRH4_PIDERR 0x00000010 // PID Error +#define USB_RXCSRH4_DMAMOD 0x00000008 // DMA Request Mode +#define USB_RXCSRH4_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_RXCSRH4_DT 0x00000002 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCOUNT4 register. +// +//***************************************************************************** +#define USB_RXCOUNT4_COUNT_M 0x00001FFF // Receive Packet Count +#define USB_RXCOUNT4_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXTYPE4 register. +// +//***************************************************************************** +#define USB_TXTYPE4_SPEED_M 0x000000C0 // Operating Speed +#define USB_TXTYPE4_SPEED_DFLT 0x00000000 // Default +#define USB_TXTYPE4_SPEED_FULL 0x00000080 // Full +#define USB_TXTYPE4_SPEED_LOW 0x000000C0 // Low +#define USB_TXTYPE4_PROTO_M 0x00000030 // Protocol +#define USB_TXTYPE4_PROTO_CTRL 0x00000000 // Control +#define USB_TXTYPE4_PROTO_ISOC 0x00000010 // Isochronous +#define USB_TXTYPE4_PROTO_BULK 0x00000020 // Bulk +#define USB_TXTYPE4_PROTO_INT 0x00000030 // Interrupt +#define USB_TXTYPE4_TEP_M 0x0000000F // Target Endpoint Number +#define USB_TXTYPE4_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXINTERVAL4 +// register. +// +//***************************************************************************** +#define USB_TXINTERVAL4_TXPOLL_M \ + 0x000000FF // TX Polling +#define USB_TXINTERVAL4_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_TXINTERVAL4_NAKLMT_S \ + 0 +#define USB_TXINTERVAL4_TXPOLL_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXTYPE4 register. +// +//***************************************************************************** +#define USB_RXTYPE4_SPEED_M 0x000000C0 // Operating Speed +#define USB_RXTYPE4_SPEED_DFLT 0x00000000 // Default +#define USB_RXTYPE4_SPEED_FULL 0x00000080 // Full +#define USB_RXTYPE4_SPEED_LOW 0x000000C0 // Low +#define USB_RXTYPE4_PROTO_M 0x00000030 // Protocol +#define USB_RXTYPE4_PROTO_CTRL 0x00000000 // Control +#define USB_RXTYPE4_PROTO_ISOC 0x00000010 // Isochronous +#define USB_RXTYPE4_PROTO_BULK 0x00000020 // Bulk +#define USB_RXTYPE4_PROTO_INT 0x00000030 // Interrupt +#define USB_RXTYPE4_TEP_M 0x0000000F // Target Endpoint Number +#define USB_RXTYPE4_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXINTERVAL4 +// register. +// +//***************************************************************************** +#define USB_RXINTERVAL4_TXPOLL_M \ + 0x000000FF // RX Polling +#define USB_RXINTERVAL4_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_RXINTERVAL4_NAKLMT_S \ + 0 +#define USB_RXINTERVAL4_TXPOLL_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXMAXP5 register. +// +//***************************************************************************** +#define USB_TXMAXP5_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_TXMAXP5_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRL5 register. +// +//***************************************************************************** +#define USB_TXCSRL5_NAKTO 0x00000080 // NAK Timeout +#define USB_TXCSRL5_CLRDT 0x00000040 // Clear Data Toggle +#define USB_TXCSRL5_STALLED 0x00000020 // Endpoint Stalled +#define USB_TXCSRL5_SETUP 0x00000010 // Setup Packet +#define USB_TXCSRL5_STALL 0x00000010 // Send STALL +#define USB_TXCSRL5_FLUSH 0x00000008 // Flush FIFO +#define USB_TXCSRL5_ERROR 0x00000004 // Error +#define USB_TXCSRL5_UNDRN 0x00000004 // Underrun +#define USB_TXCSRL5_FIFONE 0x00000002 // FIFO Not Empty +#define USB_TXCSRL5_TXRDY 0x00000001 // Transmit Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRH5 register. +// +//***************************************************************************** +#define USB_TXCSRH5_AUTOSET 0x00000080 // Auto Set +#define USB_TXCSRH5_ISO 0x00000040 // Isochronous Transfers +#define USB_TXCSRH5_MODE 0x00000020 // Mode +#define USB_TXCSRH5_DMAEN 0x00000010 // DMA Request Enable +#define USB_TXCSRH5_FDT 0x00000008 // Force Data Toggle +#define USB_TXCSRH5_DMAMOD 0x00000004 // DMA Request Mode +#define USB_TXCSRH5_DTWE 0x00000002 // Data Toggle Write Enable +#define USB_TXCSRH5_DT 0x00000001 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXMAXP5 register. +// +//***************************************************************************** +#define USB_RXMAXP5_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_RXMAXP5_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRL5 register. +// +//***************************************************************************** +#define USB_RXCSRL5_CLRDT 0x00000080 // Clear Data Toggle +#define USB_RXCSRL5_STALLED 0x00000040 // Endpoint Stalled +#define USB_RXCSRL5_STALL 0x00000020 // Send STALL +#define USB_RXCSRL5_REQPKT 0x00000020 // Request Packet +#define USB_RXCSRL5_FLUSH 0x00000010 // Flush FIFO +#define USB_RXCSRL5_NAKTO 0x00000008 // NAK Timeout +#define USB_RXCSRL5_DATAERR 0x00000008 // Data Error +#define USB_RXCSRL5_ERROR 0x00000004 // Error +#define USB_RXCSRL5_OVER 0x00000004 // Overrun +#define USB_RXCSRL5_FULL 0x00000002 // FIFO Full +#define USB_RXCSRL5_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRH5 register. +// +//***************************************************************************** +#define USB_RXCSRH5_AUTOCL 0x00000080 // Auto Clear +#define USB_RXCSRH5_AUTORQ 0x00000040 // Auto Request +#define USB_RXCSRH5_ISO 0x00000040 // Isochronous Transfers +#define USB_RXCSRH5_DMAEN 0x00000020 // DMA Request Enable +#define USB_RXCSRH5_DISNYET 0x00000010 // Disable NYET +#define USB_RXCSRH5_PIDERR 0x00000010 // PID Error +#define USB_RXCSRH5_DMAMOD 0x00000008 // DMA Request Mode +#define USB_RXCSRH5_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_RXCSRH5_DT 0x00000002 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCOUNT5 register. +// +//***************************************************************************** +#define USB_RXCOUNT5_COUNT_M 0x00001FFF // Receive Packet Count +#define USB_RXCOUNT5_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXTYPE5 register. +// +//***************************************************************************** +#define USB_TXTYPE5_SPEED_M 0x000000C0 // Operating Speed +#define USB_TXTYPE5_SPEED_DFLT 0x00000000 // Default +#define USB_TXTYPE5_SPEED_FULL 0x00000080 // Full +#define USB_TXTYPE5_SPEED_LOW 0x000000C0 // Low +#define USB_TXTYPE5_PROTO_M 0x00000030 // Protocol +#define USB_TXTYPE5_PROTO_CTRL 0x00000000 // Control +#define USB_TXTYPE5_PROTO_ISOC 0x00000010 // Isochronous +#define USB_TXTYPE5_PROTO_BULK 0x00000020 // Bulk +#define USB_TXTYPE5_PROTO_INT 0x00000030 // Interrupt +#define USB_TXTYPE5_TEP_M 0x0000000F // Target Endpoint Number +#define USB_TXTYPE5_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXINTERVAL5 +// register. +// +//***************************************************************************** +#define USB_TXINTERVAL5_TXPOLL_M \ + 0x000000FF // TX Polling +#define USB_TXINTERVAL5_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_TXINTERVAL5_NAKLMT_S \ + 0 +#define USB_TXINTERVAL5_TXPOLL_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXTYPE5 register. +// +//***************************************************************************** +#define USB_RXTYPE5_SPEED_M 0x000000C0 // Operating Speed +#define USB_RXTYPE5_SPEED_DFLT 0x00000000 // Default +#define USB_RXTYPE5_SPEED_FULL 0x00000080 // Full +#define USB_RXTYPE5_SPEED_LOW 0x000000C0 // Low +#define USB_RXTYPE5_PROTO_M 0x00000030 // Protocol +#define USB_RXTYPE5_PROTO_CTRL 0x00000000 // Control +#define USB_RXTYPE5_PROTO_ISOC 0x00000010 // Isochronous +#define USB_RXTYPE5_PROTO_BULK 0x00000020 // Bulk +#define USB_RXTYPE5_PROTO_INT 0x00000030 // Interrupt +#define USB_RXTYPE5_TEP_M 0x0000000F // Target Endpoint Number +#define USB_RXTYPE5_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXINTERVAL5 +// register. +// +//***************************************************************************** +#define USB_RXINTERVAL5_TXPOLL_M \ + 0x000000FF // RX Polling +#define USB_RXINTERVAL5_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_RXINTERVAL5_TXPOLL_S \ + 0 +#define USB_RXINTERVAL5_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXMAXP6 register. +// +//***************************************************************************** +#define USB_TXMAXP6_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_TXMAXP6_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRL6 register. +// +//***************************************************************************** +#define USB_TXCSRL6_NAKTO 0x00000080 // NAK Timeout +#define USB_TXCSRL6_CLRDT 0x00000040 // Clear Data Toggle +#define USB_TXCSRL6_STALLED 0x00000020 // Endpoint Stalled +#define USB_TXCSRL6_STALL 0x00000010 // Send STALL +#define USB_TXCSRL6_SETUP 0x00000010 // Setup Packet +#define USB_TXCSRL6_FLUSH 0x00000008 // Flush FIFO +#define USB_TXCSRL6_ERROR 0x00000004 // Error +#define USB_TXCSRL6_UNDRN 0x00000004 // Underrun +#define USB_TXCSRL6_FIFONE 0x00000002 // FIFO Not Empty +#define USB_TXCSRL6_TXRDY 0x00000001 // Transmit Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRH6 register. +// +//***************************************************************************** +#define USB_TXCSRH6_AUTOSET 0x00000080 // Auto Set +#define USB_TXCSRH6_ISO 0x00000040 // Isochronous Transfers +#define USB_TXCSRH6_MODE 0x00000020 // Mode +#define USB_TXCSRH6_DMAEN 0x00000010 // DMA Request Enable +#define USB_TXCSRH6_FDT 0x00000008 // Force Data Toggle +#define USB_TXCSRH6_DMAMOD 0x00000004 // DMA Request Mode +#define USB_TXCSRH6_DTWE 0x00000002 // Data Toggle Write Enable +#define USB_TXCSRH6_DT 0x00000001 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXMAXP6 register. +// +//***************************************************************************** +#define USB_RXMAXP6_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_RXMAXP6_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRL6 register. +// +//***************************************************************************** +#define USB_RXCSRL6_CLRDT 0x00000080 // Clear Data Toggle +#define USB_RXCSRL6_STALLED 0x00000040 // Endpoint Stalled +#define USB_RXCSRL6_REQPKT 0x00000020 // Request Packet +#define USB_RXCSRL6_STALL 0x00000020 // Send STALL +#define USB_RXCSRL6_FLUSH 0x00000010 // Flush FIFO +#define USB_RXCSRL6_NAKTO 0x00000008 // NAK Timeout +#define USB_RXCSRL6_DATAERR 0x00000008 // Data Error +#define USB_RXCSRL6_ERROR 0x00000004 // Error +#define USB_RXCSRL6_OVER 0x00000004 // Overrun +#define USB_RXCSRL6_FULL 0x00000002 // FIFO Full +#define USB_RXCSRL6_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRH6 register. +// +//***************************************************************************** +#define USB_RXCSRH6_AUTOCL 0x00000080 // Auto Clear +#define USB_RXCSRH6_AUTORQ 0x00000040 // Auto Request +#define USB_RXCSRH6_ISO 0x00000040 // Isochronous Transfers +#define USB_RXCSRH6_DMAEN 0x00000020 // DMA Request Enable +#define USB_RXCSRH6_DISNYET 0x00000010 // Disable NYET +#define USB_RXCSRH6_PIDERR 0x00000010 // PID Error +#define USB_RXCSRH6_DMAMOD 0x00000008 // DMA Request Mode +#define USB_RXCSRH6_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_RXCSRH6_DT 0x00000002 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCOUNT6 register. +// +//***************************************************************************** +#define USB_RXCOUNT6_COUNT_M 0x00001FFF // Receive Packet Count +#define USB_RXCOUNT6_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXTYPE6 register. +// +//***************************************************************************** +#define USB_TXTYPE6_SPEED_M 0x000000C0 // Operating Speed +#define USB_TXTYPE6_SPEED_DFLT 0x00000000 // Default +#define USB_TXTYPE6_SPEED_FULL 0x00000080 // Full +#define USB_TXTYPE6_SPEED_LOW 0x000000C0 // Low +#define USB_TXTYPE6_PROTO_M 0x00000030 // Protocol +#define USB_TXTYPE6_PROTO_CTRL 0x00000000 // Control +#define USB_TXTYPE6_PROTO_ISOC 0x00000010 // Isochronous +#define USB_TXTYPE6_PROTO_BULK 0x00000020 // Bulk +#define USB_TXTYPE6_PROTO_INT 0x00000030 // Interrupt +#define USB_TXTYPE6_TEP_M 0x0000000F // Target Endpoint Number +#define USB_TXTYPE6_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXINTERVAL6 +// register. +// +//***************************************************************************** +#define USB_TXINTERVAL6_TXPOLL_M \ + 0x000000FF // TX Polling +#define USB_TXINTERVAL6_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_TXINTERVAL6_TXPOLL_S \ + 0 +#define USB_TXINTERVAL6_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXTYPE6 register. +// +//***************************************************************************** +#define USB_RXTYPE6_SPEED_M 0x000000C0 // Operating Speed +#define USB_RXTYPE6_SPEED_DFLT 0x00000000 // Default +#define USB_RXTYPE6_SPEED_FULL 0x00000080 // Full +#define USB_RXTYPE6_SPEED_LOW 0x000000C0 // Low +#define USB_RXTYPE6_PROTO_M 0x00000030 // Protocol +#define USB_RXTYPE6_PROTO_CTRL 0x00000000 // Control +#define USB_RXTYPE6_PROTO_ISOC 0x00000010 // Isochronous +#define USB_RXTYPE6_PROTO_BULK 0x00000020 // Bulk +#define USB_RXTYPE6_PROTO_INT 0x00000030 // Interrupt +#define USB_RXTYPE6_TEP_M 0x0000000F // Target Endpoint Number +#define USB_RXTYPE6_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXINTERVAL6 +// register. +// +//***************************************************************************** +#define USB_RXINTERVAL6_TXPOLL_M \ + 0x000000FF // RX Polling +#define USB_RXINTERVAL6_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_RXINTERVAL6_NAKLMT_S \ + 0 +#define USB_RXINTERVAL6_TXPOLL_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXMAXP7 register. +// +//***************************************************************************** +#define USB_TXMAXP7_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_TXMAXP7_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRL7 register. +// +//***************************************************************************** +#define USB_TXCSRL7_NAKTO 0x00000080 // NAK Timeout +#define USB_TXCSRL7_CLRDT 0x00000040 // Clear Data Toggle +#define USB_TXCSRL7_STALLED 0x00000020 // Endpoint Stalled +#define USB_TXCSRL7_STALL 0x00000010 // Send STALL +#define USB_TXCSRL7_SETUP 0x00000010 // Setup Packet +#define USB_TXCSRL7_FLUSH 0x00000008 // Flush FIFO +#define USB_TXCSRL7_ERROR 0x00000004 // Error +#define USB_TXCSRL7_UNDRN 0x00000004 // Underrun +#define USB_TXCSRL7_FIFONE 0x00000002 // FIFO Not Empty +#define USB_TXCSRL7_TXRDY 0x00000001 // Transmit Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRH7 register. +// +//***************************************************************************** +#define USB_TXCSRH7_AUTOSET 0x00000080 // Auto Set +#define USB_TXCSRH7_ISO 0x00000040 // Isochronous Transfers +#define USB_TXCSRH7_MODE 0x00000020 // Mode +#define USB_TXCSRH7_DMAEN 0x00000010 // DMA Request Enable +#define USB_TXCSRH7_FDT 0x00000008 // Force Data Toggle +#define USB_TXCSRH7_DMAMOD 0x00000004 // DMA Request Mode +#define USB_TXCSRH7_DTWE 0x00000002 // Data Toggle Write Enable +#define USB_TXCSRH7_DT 0x00000001 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXMAXP7 register. +// +//***************************************************************************** +#define USB_RXMAXP7_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_RXMAXP7_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRL7 register. +// +//***************************************************************************** +#define USB_RXCSRL7_CLRDT 0x00000080 // Clear Data Toggle +#define USB_RXCSRL7_STALLED 0x00000040 // Endpoint Stalled +#define USB_RXCSRL7_REQPKT 0x00000020 // Request Packet +#define USB_RXCSRL7_STALL 0x00000020 // Send STALL +#define USB_RXCSRL7_FLUSH 0x00000010 // Flush FIFO +#define USB_RXCSRL7_DATAERR 0x00000008 // Data Error +#define USB_RXCSRL7_NAKTO 0x00000008 // NAK Timeout +#define USB_RXCSRL7_ERROR 0x00000004 // Error +#define USB_RXCSRL7_OVER 0x00000004 // Overrun +#define USB_RXCSRL7_FULL 0x00000002 // FIFO Full +#define USB_RXCSRL7_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRH7 register. +// +//***************************************************************************** +#define USB_RXCSRH7_AUTOCL 0x00000080 // Auto Clear +#define USB_RXCSRH7_ISO 0x00000040 // Isochronous Transfers +#define USB_RXCSRH7_AUTORQ 0x00000040 // Auto Request +#define USB_RXCSRH7_DMAEN 0x00000020 // DMA Request Enable +#define USB_RXCSRH7_PIDERR 0x00000010 // PID Error +#define USB_RXCSRH7_DISNYET 0x00000010 // Disable NYET +#define USB_RXCSRH7_DMAMOD 0x00000008 // DMA Request Mode +#define USB_RXCSRH7_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_RXCSRH7_DT 0x00000002 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCOUNT7 register. +// +//***************************************************************************** +#define USB_RXCOUNT7_COUNT_M 0x00001FFF // Receive Packet Count +#define USB_RXCOUNT7_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXTYPE7 register. +// +//***************************************************************************** +#define USB_TXTYPE7_SPEED_M 0x000000C0 // Operating Speed +#define USB_TXTYPE7_SPEED_DFLT 0x00000000 // Default +#define USB_TXTYPE7_SPEED_FULL 0x00000080 // Full +#define USB_TXTYPE7_SPEED_LOW 0x000000C0 // Low +#define USB_TXTYPE7_PROTO_M 0x00000030 // Protocol +#define USB_TXTYPE7_PROTO_CTRL 0x00000000 // Control +#define USB_TXTYPE7_PROTO_ISOC 0x00000010 // Isochronous +#define USB_TXTYPE7_PROTO_BULK 0x00000020 // Bulk +#define USB_TXTYPE7_PROTO_INT 0x00000030 // Interrupt +#define USB_TXTYPE7_TEP_M 0x0000000F // Target Endpoint Number +#define USB_TXTYPE7_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXINTERVAL7 +// register. +// +//***************************************************************************** +#define USB_TXINTERVAL7_TXPOLL_M \ + 0x000000FF // TX Polling +#define USB_TXINTERVAL7_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_TXINTERVAL7_NAKLMT_S \ + 0 +#define USB_TXINTERVAL7_TXPOLL_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXTYPE7 register. +// +//***************************************************************************** +#define USB_RXTYPE7_SPEED_M 0x000000C0 // Operating Speed +#define USB_RXTYPE7_SPEED_DFLT 0x00000000 // Default +#define USB_RXTYPE7_SPEED_FULL 0x00000080 // Full +#define USB_RXTYPE7_SPEED_LOW 0x000000C0 // Low +#define USB_RXTYPE7_PROTO_M 0x00000030 // Protocol +#define USB_RXTYPE7_PROTO_CTRL 0x00000000 // Control +#define USB_RXTYPE7_PROTO_ISOC 0x00000010 // Isochronous +#define USB_RXTYPE7_PROTO_BULK 0x00000020 // Bulk +#define USB_RXTYPE7_PROTO_INT 0x00000030 // Interrupt +#define USB_RXTYPE7_TEP_M 0x0000000F // Target Endpoint Number +#define USB_RXTYPE7_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXINTERVAL7 +// register. +// +//***************************************************************************** +#define USB_RXINTERVAL7_TXPOLL_M \ + 0x000000FF // RX Polling +#define USB_RXINTERVAL7_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_RXINTERVAL7_NAKLMT_S \ + 0 +#define USB_RXINTERVAL7_TXPOLL_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXMAXP8 register. +// +//***************************************************************************** +#define USB_TXMAXP8_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_TXMAXP8_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRL8 register. +// +//***************************************************************************** +#define USB_TXCSRL8_NAKTO 0x00000080 // NAK Timeout +#define USB_TXCSRL8_CLRDT 0x00000040 // Clear Data Toggle +#define USB_TXCSRL8_STALLED 0x00000020 // Endpoint Stalled +#define USB_TXCSRL8_STALL 0x00000010 // Send STALL +#define USB_TXCSRL8_SETUP 0x00000010 // Setup Packet +#define USB_TXCSRL8_FLUSH 0x00000008 // Flush FIFO +#define USB_TXCSRL8_ERROR 0x00000004 // Error +#define USB_TXCSRL8_UNDRN 0x00000004 // Underrun +#define USB_TXCSRL8_FIFONE 0x00000002 // FIFO Not Empty +#define USB_TXCSRL8_TXRDY 0x00000001 // Transmit Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRH8 register. +// +//***************************************************************************** +#define USB_TXCSRH8_AUTOSET 0x00000080 // Auto Set +#define USB_TXCSRH8_ISO 0x00000040 // Isochronous Transfers +#define USB_TXCSRH8_MODE 0x00000020 // Mode +#define USB_TXCSRH8_DMAEN 0x00000010 // DMA Request Enable +#define USB_TXCSRH8_FDT 0x00000008 // Force Data Toggle +#define USB_TXCSRH8_DMAMOD 0x00000004 // DMA Request Mode +#define USB_TXCSRH8_DTWE 0x00000002 // Data Toggle Write Enable +#define USB_TXCSRH8_DT 0x00000001 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXMAXP8 register. +// +//***************************************************************************** +#define USB_RXMAXP8_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_RXMAXP8_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRL8 register. +// +//***************************************************************************** +#define USB_RXCSRL8_CLRDT 0x00000080 // Clear Data Toggle +#define USB_RXCSRL8_STALLED 0x00000040 // Endpoint Stalled +#define USB_RXCSRL8_STALL 0x00000020 // Send STALL +#define USB_RXCSRL8_REQPKT 0x00000020 // Request Packet +#define USB_RXCSRL8_FLUSH 0x00000010 // Flush FIFO +#define USB_RXCSRL8_NAKTO 0x00000008 // NAK Timeout +#define USB_RXCSRL8_DATAERR 0x00000008 // Data Error +#define USB_RXCSRL8_OVER 0x00000004 // Overrun +#define USB_RXCSRL8_ERROR 0x00000004 // Error +#define USB_RXCSRL8_FULL 0x00000002 // FIFO Full +#define USB_RXCSRL8_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRH8 register. +// +//***************************************************************************** +#define USB_RXCSRH8_AUTOCL 0x00000080 // Auto Clear +#define USB_RXCSRH8_AUTORQ 0x00000040 // Auto Request +#define USB_RXCSRH8_ISO 0x00000040 // Isochronous Transfers +#define USB_RXCSRH8_DMAEN 0x00000020 // DMA Request Enable +#define USB_RXCSRH8_DISNYET 0x00000010 // Disable NYET +#define USB_RXCSRH8_PIDERR 0x00000010 // PID Error +#define USB_RXCSRH8_DMAMOD 0x00000008 // DMA Request Mode +#define USB_RXCSRH8_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_RXCSRH8_DT 0x00000002 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCOUNT8 register. +// +//***************************************************************************** +#define USB_RXCOUNT8_COUNT_M 0x00001FFF // Receive Packet Count +#define USB_RXCOUNT8_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXTYPE8 register. +// +//***************************************************************************** +#define USB_TXTYPE8_SPEED_M 0x000000C0 // Operating Speed +#define USB_TXTYPE8_SPEED_DFLT 0x00000000 // Default +#define USB_TXTYPE8_SPEED_FULL 0x00000080 // Full +#define USB_TXTYPE8_SPEED_LOW 0x000000C0 // Low +#define USB_TXTYPE8_PROTO_M 0x00000030 // Protocol +#define USB_TXTYPE8_PROTO_CTRL 0x00000000 // Control +#define USB_TXTYPE8_PROTO_ISOC 0x00000010 // Isochronous +#define USB_TXTYPE8_PROTO_BULK 0x00000020 // Bulk +#define USB_TXTYPE8_PROTO_INT 0x00000030 // Interrupt +#define USB_TXTYPE8_TEP_M 0x0000000F // Target Endpoint Number +#define USB_TXTYPE8_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXINTERVAL8 +// register. +// +//***************************************************************************** +#define USB_TXINTERVAL8_TXPOLL_M \ + 0x000000FF // TX Polling +#define USB_TXINTERVAL8_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_TXINTERVAL8_NAKLMT_S \ + 0 +#define USB_TXINTERVAL8_TXPOLL_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXTYPE8 register. +// +//***************************************************************************** +#define USB_RXTYPE8_SPEED_M 0x000000C0 // Operating Speed +#define USB_RXTYPE8_SPEED_DFLT 0x00000000 // Default +#define USB_RXTYPE8_SPEED_FULL 0x00000080 // Full +#define USB_RXTYPE8_SPEED_LOW 0x000000C0 // Low +#define USB_RXTYPE8_PROTO_M 0x00000030 // Protocol +#define USB_RXTYPE8_PROTO_CTRL 0x00000000 // Control +#define USB_RXTYPE8_PROTO_ISOC 0x00000010 // Isochronous +#define USB_RXTYPE8_PROTO_BULK 0x00000020 // Bulk +#define USB_RXTYPE8_PROTO_INT 0x00000030 // Interrupt +#define USB_RXTYPE8_TEP_M 0x0000000F // Target Endpoint Number +#define USB_RXTYPE8_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXINTERVAL8 +// register. +// +//***************************************************************************** +#define USB_RXINTERVAL8_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_RXINTERVAL8_TXPOLL_M \ + 0x000000FF // RX Polling +#define USB_RXINTERVAL8_NAKLMT_S \ + 0 +#define USB_RXINTERVAL8_TXPOLL_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXMAXP9 register. +// +//***************************************************************************** +#define USB_TXMAXP9_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_TXMAXP9_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRL9 register. +// +//***************************************************************************** +#define USB_TXCSRL9_NAKTO 0x00000080 // NAK Timeout +#define USB_TXCSRL9_CLRDT 0x00000040 // Clear Data Toggle +#define USB_TXCSRL9_STALLED 0x00000020 // Endpoint Stalled +#define USB_TXCSRL9_SETUP 0x00000010 // Setup Packet +#define USB_TXCSRL9_STALL 0x00000010 // Send STALL +#define USB_TXCSRL9_FLUSH 0x00000008 // Flush FIFO +#define USB_TXCSRL9_ERROR 0x00000004 // Error +#define USB_TXCSRL9_UNDRN 0x00000004 // Underrun +#define USB_TXCSRL9_FIFONE 0x00000002 // FIFO Not Empty +#define USB_TXCSRL9_TXRDY 0x00000001 // Transmit Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRH9 register. +// +//***************************************************************************** +#define USB_TXCSRH9_AUTOSET 0x00000080 // Auto Set +#define USB_TXCSRH9_ISO 0x00000040 // Isochronous Transfers +#define USB_TXCSRH9_MODE 0x00000020 // Mode +#define USB_TXCSRH9_DMAEN 0x00000010 // DMA Request Enable +#define USB_TXCSRH9_FDT 0x00000008 // Force Data Toggle +#define USB_TXCSRH9_DMAMOD 0x00000004 // DMA Request Mode +#define USB_TXCSRH9_DTWE 0x00000002 // Data Toggle Write Enable +#define USB_TXCSRH9_DT 0x00000001 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXMAXP9 register. +// +//***************************************************************************** +#define USB_RXMAXP9_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_RXMAXP9_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRL9 register. +// +//***************************************************************************** +#define USB_RXCSRL9_CLRDT 0x00000080 // Clear Data Toggle +#define USB_RXCSRL9_STALLED 0x00000040 // Endpoint Stalled +#define USB_RXCSRL9_STALL 0x00000020 // Send STALL +#define USB_RXCSRL9_REQPKT 0x00000020 // Request Packet +#define USB_RXCSRL9_FLUSH 0x00000010 // Flush FIFO +#define USB_RXCSRL9_DATAERR 0x00000008 // Data Error +#define USB_RXCSRL9_NAKTO 0x00000008 // NAK Timeout +#define USB_RXCSRL9_ERROR 0x00000004 // Error +#define USB_RXCSRL9_OVER 0x00000004 // Overrun +#define USB_RXCSRL9_FULL 0x00000002 // FIFO Full +#define USB_RXCSRL9_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRH9 register. +// +//***************************************************************************** +#define USB_RXCSRH9_AUTOCL 0x00000080 // Auto Clear +#define USB_RXCSRH9_ISO 0x00000040 // Isochronous Transfers +#define USB_RXCSRH9_AUTORQ 0x00000040 // Auto Request +#define USB_RXCSRH9_DMAEN 0x00000020 // DMA Request Enable +#define USB_RXCSRH9_PIDERR 0x00000010 // PID Error +#define USB_RXCSRH9_DISNYET 0x00000010 // Disable NYET +#define USB_RXCSRH9_DMAMOD 0x00000008 // DMA Request Mode +#define USB_RXCSRH9_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_RXCSRH9_DT 0x00000002 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCOUNT9 register. +// +//***************************************************************************** +#define USB_RXCOUNT9_COUNT_M 0x00001FFF // Receive Packet Count +#define USB_RXCOUNT9_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXTYPE9 register. +// +//***************************************************************************** +#define USB_TXTYPE9_SPEED_M 0x000000C0 // Operating Speed +#define USB_TXTYPE9_SPEED_DFLT 0x00000000 // Default +#define USB_TXTYPE9_SPEED_FULL 0x00000080 // Full +#define USB_TXTYPE9_SPEED_LOW 0x000000C0 // Low +#define USB_TXTYPE9_PROTO_M 0x00000030 // Protocol +#define USB_TXTYPE9_PROTO_CTRL 0x00000000 // Control +#define USB_TXTYPE9_PROTO_ISOC 0x00000010 // Isochronous +#define USB_TXTYPE9_PROTO_BULK 0x00000020 // Bulk +#define USB_TXTYPE9_PROTO_INT 0x00000030 // Interrupt +#define USB_TXTYPE9_TEP_M 0x0000000F // Target Endpoint Number +#define USB_TXTYPE9_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXINTERVAL9 +// register. +// +//***************************************************************************** +#define USB_TXINTERVAL9_TXPOLL_M \ + 0x000000FF // TX Polling +#define USB_TXINTERVAL9_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_TXINTERVAL9_TXPOLL_S \ + 0 +#define USB_TXINTERVAL9_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXTYPE9 register. +// +//***************************************************************************** +#define USB_RXTYPE9_SPEED_M 0x000000C0 // Operating Speed +#define USB_RXTYPE9_SPEED_DFLT 0x00000000 // Default +#define USB_RXTYPE9_SPEED_FULL 0x00000080 // Full +#define USB_RXTYPE9_SPEED_LOW 0x000000C0 // Low +#define USB_RXTYPE9_PROTO_M 0x00000030 // Protocol +#define USB_RXTYPE9_PROTO_CTRL 0x00000000 // Control +#define USB_RXTYPE9_PROTO_ISOC 0x00000010 // Isochronous +#define USB_RXTYPE9_PROTO_BULK 0x00000020 // Bulk +#define USB_RXTYPE9_PROTO_INT 0x00000030 // Interrupt +#define USB_RXTYPE9_TEP_M 0x0000000F // Target Endpoint Number +#define USB_RXTYPE9_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXINTERVAL9 +// register. +// +//***************************************************************************** +#define USB_RXINTERVAL9_TXPOLL_M \ + 0x000000FF // RX Polling +#define USB_RXINTERVAL9_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_RXINTERVAL9_NAKLMT_S \ + 0 +#define USB_RXINTERVAL9_TXPOLL_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXMAXP10 register. +// +//***************************************************************************** +#define USB_TXMAXP10_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_TXMAXP10_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRL10 register. +// +//***************************************************************************** +#define USB_TXCSRL10_NAKTO 0x00000080 // NAK Timeout +#define USB_TXCSRL10_CLRDT 0x00000040 // Clear Data Toggle +#define USB_TXCSRL10_STALLED 0x00000020 // Endpoint Stalled +#define USB_TXCSRL10_SETUP 0x00000010 // Setup Packet +#define USB_TXCSRL10_STALL 0x00000010 // Send STALL +#define USB_TXCSRL10_FLUSH 0x00000008 // Flush FIFO +#define USB_TXCSRL10_UNDRN 0x00000004 // Underrun +#define USB_TXCSRL10_ERROR 0x00000004 // Error +#define USB_TXCSRL10_FIFONE 0x00000002 // FIFO Not Empty +#define USB_TXCSRL10_TXRDY 0x00000001 // Transmit Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRH10 register. +// +//***************************************************************************** +#define USB_TXCSRH10_AUTOSET 0x00000080 // Auto Set +#define USB_TXCSRH10_ISO 0x00000040 // Isochronous Transfers +#define USB_TXCSRH10_MODE 0x00000020 // Mode +#define USB_TXCSRH10_DMAEN 0x00000010 // DMA Request Enable +#define USB_TXCSRH10_FDT 0x00000008 // Force Data Toggle +#define USB_TXCSRH10_DMAMOD 0x00000004 // DMA Request Mode +#define USB_TXCSRH10_DTWE 0x00000002 // Data Toggle Write Enable +#define USB_TXCSRH10_DT 0x00000001 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXMAXP10 register. +// +//***************************************************************************** +#define USB_RXMAXP10_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_RXMAXP10_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRL10 register. +// +//***************************************************************************** +#define USB_RXCSRL10_CLRDT 0x00000080 // Clear Data Toggle +#define USB_RXCSRL10_STALLED 0x00000040 // Endpoint Stalled +#define USB_RXCSRL10_STALL 0x00000020 // Send STALL +#define USB_RXCSRL10_REQPKT 0x00000020 // Request Packet +#define USB_RXCSRL10_FLUSH 0x00000010 // Flush FIFO +#define USB_RXCSRL10_NAKTO 0x00000008 // NAK Timeout +#define USB_RXCSRL10_DATAERR 0x00000008 // Data Error +#define USB_RXCSRL10_OVER 0x00000004 // Overrun +#define USB_RXCSRL10_ERROR 0x00000004 // Error +#define USB_RXCSRL10_FULL 0x00000002 // FIFO Full +#define USB_RXCSRL10_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRH10 register. +// +//***************************************************************************** +#define USB_RXCSRH10_AUTOCL 0x00000080 // Auto Clear +#define USB_RXCSRH10_AUTORQ 0x00000040 // Auto Request +#define USB_RXCSRH10_ISO 0x00000040 // Isochronous Transfers +#define USB_RXCSRH10_DMAEN 0x00000020 // DMA Request Enable +#define USB_RXCSRH10_PIDERR 0x00000010 // PID Error +#define USB_RXCSRH10_DISNYET 0x00000010 // Disable NYET +#define USB_RXCSRH10_DMAMOD 0x00000008 // DMA Request Mode +#define USB_RXCSRH10_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_RXCSRH10_DT 0x00000002 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCOUNT10 +// register. +// +//***************************************************************************** +#define USB_RXCOUNT10_COUNT_M 0x00001FFF // Receive Packet Count +#define USB_RXCOUNT10_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXTYPE10 register. +// +//***************************************************************************** +#define USB_TXTYPE10_SPEED_M 0x000000C0 // Operating Speed +#define USB_TXTYPE10_SPEED_DFLT 0x00000000 // Default +#define USB_TXTYPE10_SPEED_FULL 0x00000080 // Full +#define USB_TXTYPE10_SPEED_LOW 0x000000C0 // Low +#define USB_TXTYPE10_PROTO_M 0x00000030 // Protocol +#define USB_TXTYPE10_PROTO_CTRL 0x00000000 // Control +#define USB_TXTYPE10_PROTO_ISOC 0x00000010 // Isochronous +#define USB_TXTYPE10_PROTO_BULK 0x00000020 // Bulk +#define USB_TXTYPE10_PROTO_INT 0x00000030 // Interrupt +#define USB_TXTYPE10_TEP_M 0x0000000F // Target Endpoint Number +#define USB_TXTYPE10_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXINTERVAL10 +// register. +// +//***************************************************************************** +#define USB_TXINTERVAL10_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_TXINTERVAL10_TXPOLL_M \ + 0x000000FF // TX Polling +#define USB_TXINTERVAL10_TXPOLL_S \ + 0 +#define USB_TXINTERVAL10_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXTYPE10 register. +// +//***************************************************************************** +#define USB_RXTYPE10_SPEED_M 0x000000C0 // Operating Speed +#define USB_RXTYPE10_SPEED_DFLT 0x00000000 // Default +#define USB_RXTYPE10_SPEED_FULL 0x00000080 // Full +#define USB_RXTYPE10_SPEED_LOW 0x000000C0 // Low +#define USB_RXTYPE10_PROTO_M 0x00000030 // Protocol +#define USB_RXTYPE10_PROTO_CTRL 0x00000000 // Control +#define USB_RXTYPE10_PROTO_ISOC 0x00000010 // Isochronous +#define USB_RXTYPE10_PROTO_BULK 0x00000020 // Bulk +#define USB_RXTYPE10_PROTO_INT 0x00000030 // Interrupt +#define USB_RXTYPE10_TEP_M 0x0000000F // Target Endpoint Number +#define USB_RXTYPE10_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXINTERVAL10 +// register. +// +//***************************************************************************** +#define USB_RXINTERVAL10_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_RXINTERVAL10_TXPOLL_M \ + 0x000000FF // RX Polling +#define USB_RXINTERVAL10_TXPOLL_S \ + 0 +#define USB_RXINTERVAL10_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXMAXP11 register. +// +//***************************************************************************** +#define USB_TXMAXP11_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_TXMAXP11_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRL11 register. +// +//***************************************************************************** +#define USB_TXCSRL11_NAKTO 0x00000080 // NAK Timeout +#define USB_TXCSRL11_CLRDT 0x00000040 // Clear Data Toggle +#define USB_TXCSRL11_STALLED 0x00000020 // Endpoint Stalled +#define USB_TXCSRL11_STALL 0x00000010 // Send STALL +#define USB_TXCSRL11_SETUP 0x00000010 // Setup Packet +#define USB_TXCSRL11_FLUSH 0x00000008 // Flush FIFO +#define USB_TXCSRL11_ERROR 0x00000004 // Error +#define USB_TXCSRL11_UNDRN 0x00000004 // Underrun +#define USB_TXCSRL11_FIFONE 0x00000002 // FIFO Not Empty +#define USB_TXCSRL11_TXRDY 0x00000001 // Transmit Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRH11 register. +// +//***************************************************************************** +#define USB_TXCSRH11_AUTOSET 0x00000080 // Auto Set +#define USB_TXCSRH11_ISO 0x00000040 // Isochronous Transfers +#define USB_TXCSRH11_MODE 0x00000020 // Mode +#define USB_TXCSRH11_DMAEN 0x00000010 // DMA Request Enable +#define USB_TXCSRH11_FDT 0x00000008 // Force Data Toggle +#define USB_TXCSRH11_DMAMOD 0x00000004 // DMA Request Mode +#define USB_TXCSRH11_DTWE 0x00000002 // Data Toggle Write Enable +#define USB_TXCSRH11_DT 0x00000001 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXMAXP11 register. +// +//***************************************************************************** +#define USB_RXMAXP11_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_RXMAXP11_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRL11 register. +// +//***************************************************************************** +#define USB_RXCSRL11_CLRDT 0x00000080 // Clear Data Toggle +#define USB_RXCSRL11_STALLED 0x00000040 // Endpoint Stalled +#define USB_RXCSRL11_STALL 0x00000020 // Send STALL +#define USB_RXCSRL11_REQPKT 0x00000020 // Request Packet +#define USB_RXCSRL11_FLUSH 0x00000010 // Flush FIFO +#define USB_RXCSRL11_DATAERR 0x00000008 // Data Error +#define USB_RXCSRL11_NAKTO 0x00000008 // NAK Timeout +#define USB_RXCSRL11_OVER 0x00000004 // Overrun +#define USB_RXCSRL11_ERROR 0x00000004 // Error +#define USB_RXCSRL11_FULL 0x00000002 // FIFO Full +#define USB_RXCSRL11_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRH11 register. +// +//***************************************************************************** +#define USB_RXCSRH11_AUTOCL 0x00000080 // Auto Clear +#define USB_RXCSRH11_ISO 0x00000040 // Isochronous Transfers +#define USB_RXCSRH11_AUTORQ 0x00000040 // Auto Request +#define USB_RXCSRH11_DMAEN 0x00000020 // DMA Request Enable +#define USB_RXCSRH11_DISNYET 0x00000010 // Disable NYET +#define USB_RXCSRH11_PIDERR 0x00000010 // PID Error +#define USB_RXCSRH11_DMAMOD 0x00000008 // DMA Request Mode +#define USB_RXCSRH11_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_RXCSRH11_DT 0x00000002 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCOUNT11 +// register. +// +//***************************************************************************** +#define USB_RXCOUNT11_COUNT_M 0x00001FFF // Receive Packet Count +#define USB_RXCOUNT11_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXTYPE11 register. +// +//***************************************************************************** +#define USB_TXTYPE11_SPEED_M 0x000000C0 // Operating Speed +#define USB_TXTYPE11_SPEED_DFLT 0x00000000 // Default +#define USB_TXTYPE11_SPEED_FULL 0x00000080 // Full +#define USB_TXTYPE11_SPEED_LOW 0x000000C0 // Low +#define USB_TXTYPE11_PROTO_M 0x00000030 // Protocol +#define USB_TXTYPE11_PROTO_CTRL 0x00000000 // Control +#define USB_TXTYPE11_PROTO_ISOC 0x00000010 // Isochronous +#define USB_TXTYPE11_PROTO_BULK 0x00000020 // Bulk +#define USB_TXTYPE11_PROTO_INT 0x00000030 // Interrupt +#define USB_TXTYPE11_TEP_M 0x0000000F // Target Endpoint Number +#define USB_TXTYPE11_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXINTERVAL11 +// register. +// +//***************************************************************************** +#define USB_TXINTERVAL11_TXPOLL_M \ + 0x000000FF // TX Polling +#define USB_TXINTERVAL11_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_TXINTERVAL11_NAKLMT_S \ + 0 +#define USB_TXINTERVAL11_TXPOLL_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXTYPE11 register. +// +//***************************************************************************** +#define USB_RXTYPE11_SPEED_M 0x000000C0 // Operating Speed +#define USB_RXTYPE11_SPEED_DFLT 0x00000000 // Default +#define USB_RXTYPE11_SPEED_FULL 0x00000080 // Full +#define USB_RXTYPE11_SPEED_LOW 0x000000C0 // Low +#define USB_RXTYPE11_PROTO_M 0x00000030 // Protocol +#define USB_RXTYPE11_PROTO_CTRL 0x00000000 // Control +#define USB_RXTYPE11_PROTO_ISOC 0x00000010 // Isochronous +#define USB_RXTYPE11_PROTO_BULK 0x00000020 // Bulk +#define USB_RXTYPE11_PROTO_INT 0x00000030 // Interrupt +#define USB_RXTYPE11_TEP_M 0x0000000F // Target Endpoint Number +#define USB_RXTYPE11_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXINTERVAL11 +// register. +// +//***************************************************************************** +#define USB_RXINTERVAL11_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_RXINTERVAL11_TXPOLL_M \ + 0x000000FF // RX Polling +#define USB_RXINTERVAL11_TXPOLL_S \ + 0 +#define USB_RXINTERVAL11_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXMAXP12 register. +// +//***************************************************************************** +#define USB_TXMAXP12_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_TXMAXP12_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRL12 register. +// +//***************************************************************************** +#define USB_TXCSRL12_NAKTO 0x00000080 // NAK Timeout +#define USB_TXCSRL12_CLRDT 0x00000040 // Clear Data Toggle +#define USB_TXCSRL12_STALLED 0x00000020 // Endpoint Stalled +#define USB_TXCSRL12_SETUP 0x00000010 // Setup Packet +#define USB_TXCSRL12_STALL 0x00000010 // Send STALL +#define USB_TXCSRL12_FLUSH 0x00000008 // Flush FIFO +#define USB_TXCSRL12_UNDRN 0x00000004 // Underrun +#define USB_TXCSRL12_ERROR 0x00000004 // Error +#define USB_TXCSRL12_FIFONE 0x00000002 // FIFO Not Empty +#define USB_TXCSRL12_TXRDY 0x00000001 // Transmit Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRH12 register. +// +//***************************************************************************** +#define USB_TXCSRH12_AUTOSET 0x00000080 // Auto Set +#define USB_TXCSRH12_ISO 0x00000040 // Isochronous Transfers +#define USB_TXCSRH12_MODE 0x00000020 // Mode +#define USB_TXCSRH12_DMAEN 0x00000010 // DMA Request Enable +#define USB_TXCSRH12_FDT 0x00000008 // Force Data Toggle +#define USB_TXCSRH12_DMAMOD 0x00000004 // DMA Request Mode +#define USB_TXCSRH12_DTWE 0x00000002 // Data Toggle Write Enable +#define USB_TXCSRH12_DT 0x00000001 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXMAXP12 register. +// +//***************************************************************************** +#define USB_RXMAXP12_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_RXMAXP12_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRL12 register. +// +//***************************************************************************** +#define USB_RXCSRL12_CLRDT 0x00000080 // Clear Data Toggle +#define USB_RXCSRL12_STALLED 0x00000040 // Endpoint Stalled +#define USB_RXCSRL12_STALL 0x00000020 // Send STALL +#define USB_RXCSRL12_REQPKT 0x00000020 // Request Packet +#define USB_RXCSRL12_FLUSH 0x00000010 // Flush FIFO +#define USB_RXCSRL12_NAKTO 0x00000008 // NAK Timeout +#define USB_RXCSRL12_DATAERR 0x00000008 // Data Error +#define USB_RXCSRL12_ERROR 0x00000004 // Error +#define USB_RXCSRL12_OVER 0x00000004 // Overrun +#define USB_RXCSRL12_FULL 0x00000002 // FIFO Full +#define USB_RXCSRL12_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRH12 register. +// +//***************************************************************************** +#define USB_RXCSRH12_AUTOCL 0x00000080 // Auto Clear +#define USB_RXCSRH12_ISO 0x00000040 // Isochronous Transfers +#define USB_RXCSRH12_AUTORQ 0x00000040 // Auto Request +#define USB_RXCSRH12_DMAEN 0x00000020 // DMA Request Enable +#define USB_RXCSRH12_PIDERR 0x00000010 // PID Error +#define USB_RXCSRH12_DISNYET 0x00000010 // Disable NYET +#define USB_RXCSRH12_DMAMOD 0x00000008 // DMA Request Mode +#define USB_RXCSRH12_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_RXCSRH12_DT 0x00000002 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCOUNT12 +// register. +// +//***************************************************************************** +#define USB_RXCOUNT12_COUNT_M 0x00001FFF // Receive Packet Count +#define USB_RXCOUNT12_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXTYPE12 register. +// +//***************************************************************************** +#define USB_TXTYPE12_SPEED_M 0x000000C0 // Operating Speed +#define USB_TXTYPE12_SPEED_DFLT 0x00000000 // Default +#define USB_TXTYPE12_SPEED_FULL 0x00000080 // Full +#define USB_TXTYPE12_SPEED_LOW 0x000000C0 // Low +#define USB_TXTYPE12_PROTO_M 0x00000030 // Protocol +#define USB_TXTYPE12_PROTO_CTRL 0x00000000 // Control +#define USB_TXTYPE12_PROTO_ISOC 0x00000010 // Isochronous +#define USB_TXTYPE12_PROTO_BULK 0x00000020 // Bulk +#define USB_TXTYPE12_PROTO_INT 0x00000030 // Interrupt +#define USB_TXTYPE12_TEP_M 0x0000000F // Target Endpoint Number +#define USB_TXTYPE12_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXINTERVAL12 +// register. +// +//***************************************************************************** +#define USB_TXINTERVAL12_TXPOLL_M \ + 0x000000FF // TX Polling +#define USB_TXINTERVAL12_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_TXINTERVAL12_TXPOLL_S \ + 0 +#define USB_TXINTERVAL12_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXTYPE12 register. +// +//***************************************************************************** +#define USB_RXTYPE12_SPEED_M 0x000000C0 // Operating Speed +#define USB_RXTYPE12_SPEED_DFLT 0x00000000 // Default +#define USB_RXTYPE12_SPEED_FULL 0x00000080 // Full +#define USB_RXTYPE12_SPEED_LOW 0x000000C0 // Low +#define USB_RXTYPE12_PROTO_M 0x00000030 // Protocol +#define USB_RXTYPE12_PROTO_CTRL 0x00000000 // Control +#define USB_RXTYPE12_PROTO_ISOC 0x00000010 // Isochronous +#define USB_RXTYPE12_PROTO_BULK 0x00000020 // Bulk +#define USB_RXTYPE12_PROTO_INT 0x00000030 // Interrupt +#define USB_RXTYPE12_TEP_M 0x0000000F // Target Endpoint Number +#define USB_RXTYPE12_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXINTERVAL12 +// register. +// +//***************************************************************************** +#define USB_RXINTERVAL12_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_RXINTERVAL12_TXPOLL_M \ + 0x000000FF // RX Polling +#define USB_RXINTERVAL12_NAKLMT_S \ + 0 +#define USB_RXINTERVAL12_TXPOLL_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXMAXP13 register. +// +//***************************************************************************** +#define USB_TXMAXP13_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_TXMAXP13_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRL13 register. +// +//***************************************************************************** +#define USB_TXCSRL13_NAKTO 0x00000080 // NAK Timeout +#define USB_TXCSRL13_CLRDT 0x00000040 // Clear Data Toggle +#define USB_TXCSRL13_STALLED 0x00000020 // Endpoint Stalled +#define USB_TXCSRL13_SETUP 0x00000010 // Setup Packet +#define USB_TXCSRL13_STALL 0x00000010 // Send STALL +#define USB_TXCSRL13_FLUSH 0x00000008 // Flush FIFO +#define USB_TXCSRL13_UNDRN 0x00000004 // Underrun +#define USB_TXCSRL13_ERROR 0x00000004 // Error +#define USB_TXCSRL13_FIFONE 0x00000002 // FIFO Not Empty +#define USB_TXCSRL13_TXRDY 0x00000001 // Transmit Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRH13 register. +// +//***************************************************************************** +#define USB_TXCSRH13_AUTOSET 0x00000080 // Auto Set +#define USB_TXCSRH13_ISO 0x00000040 // Isochronous Transfers +#define USB_TXCSRH13_MODE 0x00000020 // Mode +#define USB_TXCSRH13_DMAEN 0x00000010 // DMA Request Enable +#define USB_TXCSRH13_FDT 0x00000008 // Force Data Toggle +#define USB_TXCSRH13_DMAMOD 0x00000004 // DMA Request Mode +#define USB_TXCSRH13_DTWE 0x00000002 // Data Toggle Write Enable +#define USB_TXCSRH13_DT 0x00000001 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXMAXP13 register. +// +//***************************************************************************** +#define USB_RXMAXP13_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_RXMAXP13_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRL13 register. +// +//***************************************************************************** +#define USB_RXCSRL13_CLRDT 0x00000080 // Clear Data Toggle +#define USB_RXCSRL13_STALLED 0x00000040 // Endpoint Stalled +#define USB_RXCSRL13_REQPKT 0x00000020 // Request Packet +#define USB_RXCSRL13_STALL 0x00000020 // Send STALL +#define USB_RXCSRL13_FLUSH 0x00000010 // Flush FIFO +#define USB_RXCSRL13_NAKTO 0x00000008 // NAK Timeout +#define USB_RXCSRL13_DATAERR 0x00000008 // Data Error +#define USB_RXCSRL13_OVER 0x00000004 // Overrun +#define USB_RXCSRL13_ERROR 0x00000004 // Error +#define USB_RXCSRL13_FULL 0x00000002 // FIFO Full +#define USB_RXCSRL13_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRH13 register. +// +//***************************************************************************** +#define USB_RXCSRH13_AUTOCL 0x00000080 // Auto Clear +#define USB_RXCSRH13_ISO 0x00000040 // Isochronous Transfers +#define USB_RXCSRH13_AUTORQ 0x00000040 // Auto Request +#define USB_RXCSRH13_DMAEN 0x00000020 // DMA Request Enable +#define USB_RXCSRH13_DISNYET 0x00000010 // Disable NYET +#define USB_RXCSRH13_PIDERR 0x00000010 // PID Error +#define USB_RXCSRH13_DMAMOD 0x00000008 // DMA Request Mode +#define USB_RXCSRH13_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_RXCSRH13_DT 0x00000002 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCOUNT13 +// register. +// +//***************************************************************************** +#define USB_RXCOUNT13_COUNT_M 0x00001FFF // Receive Packet Count +#define USB_RXCOUNT13_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXTYPE13 register. +// +//***************************************************************************** +#define USB_TXTYPE13_SPEED_M 0x000000C0 // Operating Speed +#define USB_TXTYPE13_SPEED_DFLT 0x00000000 // Default +#define USB_TXTYPE13_SPEED_FULL 0x00000080 // Full +#define USB_TXTYPE13_SPEED_LOW 0x000000C0 // Low +#define USB_TXTYPE13_PROTO_M 0x00000030 // Protocol +#define USB_TXTYPE13_PROTO_CTRL 0x00000000 // Control +#define USB_TXTYPE13_PROTO_ISOC 0x00000010 // Isochronous +#define USB_TXTYPE13_PROTO_BULK 0x00000020 // Bulk +#define USB_TXTYPE13_PROTO_INT 0x00000030 // Interrupt +#define USB_TXTYPE13_TEP_M 0x0000000F // Target Endpoint Number +#define USB_TXTYPE13_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXINTERVAL13 +// register. +// +//***************************************************************************** +#define USB_TXINTERVAL13_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_TXINTERVAL13_TXPOLL_M \ + 0x000000FF // TX Polling +#define USB_TXINTERVAL13_TXPOLL_S \ + 0 +#define USB_TXINTERVAL13_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXTYPE13 register. +// +//***************************************************************************** +#define USB_RXTYPE13_SPEED_M 0x000000C0 // Operating Speed +#define USB_RXTYPE13_SPEED_DFLT 0x00000000 // Default +#define USB_RXTYPE13_SPEED_FULL 0x00000080 // Full +#define USB_RXTYPE13_SPEED_LOW 0x000000C0 // Low +#define USB_RXTYPE13_PROTO_M 0x00000030 // Protocol +#define USB_RXTYPE13_PROTO_CTRL 0x00000000 // Control +#define USB_RXTYPE13_PROTO_ISOC 0x00000010 // Isochronous +#define USB_RXTYPE13_PROTO_BULK 0x00000020 // Bulk +#define USB_RXTYPE13_PROTO_INT 0x00000030 // Interrupt +#define USB_RXTYPE13_TEP_M 0x0000000F // Target Endpoint Number +#define USB_RXTYPE13_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXINTERVAL13 +// register. +// +//***************************************************************************** +#define USB_RXINTERVAL13_TXPOLL_M \ + 0x000000FF // RX Polling +#define USB_RXINTERVAL13_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_RXINTERVAL13_TXPOLL_S \ + 0 +#define USB_RXINTERVAL13_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXMAXP14 register. +// +//***************************************************************************** +#define USB_TXMAXP14_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_TXMAXP14_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRL14 register. +// +//***************************************************************************** +#define USB_TXCSRL14_NAKTO 0x00000080 // NAK Timeout +#define USB_TXCSRL14_CLRDT 0x00000040 // Clear Data Toggle +#define USB_TXCSRL14_STALLED 0x00000020 // Endpoint Stalled +#define USB_TXCSRL14_STALL 0x00000010 // Send STALL +#define USB_TXCSRL14_SETUP 0x00000010 // Setup Packet +#define USB_TXCSRL14_FLUSH 0x00000008 // Flush FIFO +#define USB_TXCSRL14_ERROR 0x00000004 // Error +#define USB_TXCSRL14_UNDRN 0x00000004 // Underrun +#define USB_TXCSRL14_FIFONE 0x00000002 // FIFO Not Empty +#define USB_TXCSRL14_TXRDY 0x00000001 // Transmit Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRH14 register. +// +//***************************************************************************** +#define USB_TXCSRH14_AUTOSET 0x00000080 // Auto Set +#define USB_TXCSRH14_ISO 0x00000040 // Isochronous Transfers +#define USB_TXCSRH14_MODE 0x00000020 // Mode +#define USB_TXCSRH14_DMAEN 0x00000010 // DMA Request Enable +#define USB_TXCSRH14_FDT 0x00000008 // Force Data Toggle +#define USB_TXCSRH14_DMAMOD 0x00000004 // DMA Request Mode +#define USB_TXCSRH14_DTWE 0x00000002 // Data Toggle Write Enable +#define USB_TXCSRH14_DT 0x00000001 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXMAXP14 register. +// +//***************************************************************************** +#define USB_RXMAXP14_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_RXMAXP14_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRL14 register. +// +//***************************************************************************** +#define USB_RXCSRL14_CLRDT 0x00000080 // Clear Data Toggle +#define USB_RXCSRL14_STALLED 0x00000040 // Endpoint Stalled +#define USB_RXCSRL14_REQPKT 0x00000020 // Request Packet +#define USB_RXCSRL14_STALL 0x00000020 // Send STALL +#define USB_RXCSRL14_FLUSH 0x00000010 // Flush FIFO +#define USB_RXCSRL14_DATAERR 0x00000008 // Data Error +#define USB_RXCSRL14_NAKTO 0x00000008 // NAK Timeout +#define USB_RXCSRL14_OVER 0x00000004 // Overrun +#define USB_RXCSRL14_ERROR 0x00000004 // Error +#define USB_RXCSRL14_FULL 0x00000002 // FIFO Full +#define USB_RXCSRL14_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRH14 register. +// +//***************************************************************************** +#define USB_RXCSRH14_AUTOCL 0x00000080 // Auto Clear +#define USB_RXCSRH14_AUTORQ 0x00000040 // Auto Request +#define USB_RXCSRH14_ISO 0x00000040 // Isochronous Transfers +#define USB_RXCSRH14_DMAEN 0x00000020 // DMA Request Enable +#define USB_RXCSRH14_PIDERR 0x00000010 // PID Error +#define USB_RXCSRH14_DISNYET 0x00000010 // Disable NYET +#define USB_RXCSRH14_DMAMOD 0x00000008 // DMA Request Mode +#define USB_RXCSRH14_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_RXCSRH14_DT 0x00000002 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCOUNT14 +// register. +// +//***************************************************************************** +#define USB_RXCOUNT14_COUNT_M 0x00001FFF // Receive Packet Count +#define USB_RXCOUNT14_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXTYPE14 register. +// +//***************************************************************************** +#define USB_TXTYPE14_SPEED_M 0x000000C0 // Operating Speed +#define USB_TXTYPE14_SPEED_DFLT 0x00000000 // Default +#define USB_TXTYPE14_SPEED_FULL 0x00000080 // Full +#define USB_TXTYPE14_SPEED_LOW 0x000000C0 // Low +#define USB_TXTYPE14_PROTO_M 0x00000030 // Protocol +#define USB_TXTYPE14_PROTO_CTRL 0x00000000 // Control +#define USB_TXTYPE14_PROTO_ISOC 0x00000010 // Isochronous +#define USB_TXTYPE14_PROTO_BULK 0x00000020 // Bulk +#define USB_TXTYPE14_PROTO_INT 0x00000030 // Interrupt +#define USB_TXTYPE14_TEP_M 0x0000000F // Target Endpoint Number +#define USB_TXTYPE14_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXINTERVAL14 +// register. +// +//***************************************************************************** +#define USB_TXINTERVAL14_TXPOLL_M \ + 0x000000FF // TX Polling +#define USB_TXINTERVAL14_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_TXINTERVAL14_TXPOLL_S \ + 0 +#define USB_TXINTERVAL14_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXTYPE14 register. +// +//***************************************************************************** +#define USB_RXTYPE14_SPEED_M 0x000000C0 // Operating Speed +#define USB_RXTYPE14_SPEED_DFLT 0x00000000 // Default +#define USB_RXTYPE14_SPEED_FULL 0x00000080 // Full +#define USB_RXTYPE14_SPEED_LOW 0x000000C0 // Low +#define USB_RXTYPE14_PROTO_M 0x00000030 // Protocol +#define USB_RXTYPE14_PROTO_CTRL 0x00000000 // Control +#define USB_RXTYPE14_PROTO_ISOC 0x00000010 // Isochronous +#define USB_RXTYPE14_PROTO_BULK 0x00000020 // Bulk +#define USB_RXTYPE14_PROTO_INT 0x00000030 // Interrupt +#define USB_RXTYPE14_TEP_M 0x0000000F // Target Endpoint Number +#define USB_RXTYPE14_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXINTERVAL14 +// register. +// +//***************************************************************************** +#define USB_RXINTERVAL14_TXPOLL_M \ + 0x000000FF // RX Polling +#define USB_RXINTERVAL14_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_RXINTERVAL14_TXPOLL_S \ + 0 +#define USB_RXINTERVAL14_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXMAXP15 register. +// +//***************************************************************************** +#define USB_TXMAXP15_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_TXMAXP15_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRL15 register. +// +//***************************************************************************** +#define USB_TXCSRL15_NAKTO 0x00000080 // NAK Timeout +#define USB_TXCSRL15_CLRDT 0x00000040 // Clear Data Toggle +#define USB_TXCSRL15_STALLED 0x00000020 // Endpoint Stalled +#define USB_TXCSRL15_SETUP 0x00000010 // Setup Packet +#define USB_TXCSRL15_STALL 0x00000010 // Send STALL +#define USB_TXCSRL15_FLUSH 0x00000008 // Flush FIFO +#define USB_TXCSRL15_UNDRN 0x00000004 // Underrun +#define USB_TXCSRL15_ERROR 0x00000004 // Error +#define USB_TXCSRL15_FIFONE 0x00000002 // FIFO Not Empty +#define USB_TXCSRL15_TXRDY 0x00000001 // Transmit Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRH15 register. +// +//***************************************************************************** +#define USB_TXCSRH15_AUTOSET 0x00000080 // Auto Set +#define USB_TXCSRH15_ISO 0x00000040 // Isochronous Transfers +#define USB_TXCSRH15_MODE 0x00000020 // Mode +#define USB_TXCSRH15_DMAEN 0x00000010 // DMA Request Enable +#define USB_TXCSRH15_FDT 0x00000008 // Force Data Toggle +#define USB_TXCSRH15_DMAMOD 0x00000004 // DMA Request Mode +#define USB_TXCSRH15_DTWE 0x00000002 // Data Toggle Write Enable +#define USB_TXCSRH15_DT 0x00000001 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXMAXP15 register. +// +//***************************************************************************** +#define USB_RXMAXP15_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_RXMAXP15_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRL15 register. +// +//***************************************************************************** +#define USB_RXCSRL15_CLRDT 0x00000080 // Clear Data Toggle +#define USB_RXCSRL15_STALLED 0x00000040 // Endpoint Stalled +#define USB_RXCSRL15_STALL 0x00000020 // Send STALL +#define USB_RXCSRL15_REQPKT 0x00000020 // Request Packet +#define USB_RXCSRL15_FLUSH 0x00000010 // Flush FIFO +#define USB_RXCSRL15_DATAERR 0x00000008 // Data Error +#define USB_RXCSRL15_NAKTO 0x00000008 // NAK Timeout +#define USB_RXCSRL15_ERROR 0x00000004 // Error +#define USB_RXCSRL15_OVER 0x00000004 // Overrun +#define USB_RXCSRL15_FULL 0x00000002 // FIFO Full +#define USB_RXCSRL15_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRH15 register. +// +//***************************************************************************** +#define USB_RXCSRH15_AUTOCL 0x00000080 // Auto Clear +#define USB_RXCSRH15_AUTORQ 0x00000040 // Auto Request +#define USB_RXCSRH15_ISO 0x00000040 // Isochronous Transfers +#define USB_RXCSRH15_DMAEN 0x00000020 // DMA Request Enable +#define USB_RXCSRH15_PIDERR 0x00000010 // PID Error +#define USB_RXCSRH15_DISNYET 0x00000010 // Disable NYET +#define USB_RXCSRH15_DMAMOD 0x00000008 // DMA Request Mode +#define USB_RXCSRH15_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_RXCSRH15_DT 0x00000002 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCOUNT15 +// register. +// +//***************************************************************************** +#define USB_RXCOUNT15_COUNT_M 0x00001FFF // Receive Packet Count +#define USB_RXCOUNT15_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXTYPE15 register. +// +//***************************************************************************** +#define USB_TXTYPE15_SPEED_M 0x000000C0 // Operating Speed +#define USB_TXTYPE15_SPEED_DFLT 0x00000000 // Default +#define USB_TXTYPE15_SPEED_FULL 0x00000080 // Full +#define USB_TXTYPE15_SPEED_LOW 0x000000C0 // Low +#define USB_TXTYPE15_PROTO_M 0x00000030 // Protocol +#define USB_TXTYPE15_PROTO_CTRL 0x00000000 // Control +#define USB_TXTYPE15_PROTO_ISOC 0x00000010 // Isochronous +#define USB_TXTYPE15_PROTO_BULK 0x00000020 // Bulk +#define USB_TXTYPE15_PROTO_INT 0x00000030 // Interrupt +#define USB_TXTYPE15_TEP_M 0x0000000F // Target Endpoint Number +#define USB_TXTYPE15_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXINTERVAL15 +// register. +// +//***************************************************************************** +#define USB_TXINTERVAL15_TXPOLL_M \ + 0x000000FF // TX Polling +#define USB_TXINTERVAL15_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_TXINTERVAL15_NAKLMT_S \ + 0 +#define USB_TXINTERVAL15_TXPOLL_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXTYPE15 register. +// +//***************************************************************************** +#define USB_RXTYPE15_SPEED_M 0x000000C0 // Operating Speed +#define USB_RXTYPE15_SPEED_DFLT 0x00000000 // Default +#define USB_RXTYPE15_SPEED_FULL 0x00000080 // Full +#define USB_RXTYPE15_SPEED_LOW 0x000000C0 // Low +#define USB_RXTYPE15_PROTO_M 0x00000030 // Protocol +#define USB_RXTYPE15_PROTO_CTRL 0x00000000 // Control +#define USB_RXTYPE15_PROTO_ISOC 0x00000010 // Isochronous +#define USB_RXTYPE15_PROTO_BULK 0x00000020 // Bulk +#define USB_RXTYPE15_PROTO_INT 0x00000030 // Interrupt +#define USB_RXTYPE15_TEP_M 0x0000000F // Target Endpoint Number +#define USB_RXTYPE15_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXINTERVAL15 +// register. +// +//***************************************************************************** +#define USB_RXINTERVAL15_TXPOLL_M \ + 0x000000FF // RX Polling +#define USB_RXINTERVAL15_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_RXINTERVAL15_TXPOLL_S \ + 0 +#define USB_RXINTERVAL15_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RQPKTCOUNT1 +// register. +// +//***************************************************************************** +#define USB_RQPKTCOUNT1_M 0x0000FFFF // Block Transfer Packet Count +#define USB_RQPKTCOUNT1_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RQPKTCOUNT2 +// register. +// +//***************************************************************************** +#define USB_RQPKTCOUNT2_M 0x0000FFFF // Block Transfer Packet Count +#define USB_RQPKTCOUNT2_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RQPKTCOUNT3 +// register. +// +//***************************************************************************** +#define USB_RQPKTCOUNT3_M 0x0000FFFF // Block Transfer Packet Count +#define USB_RQPKTCOUNT3_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RQPKTCOUNT4 +// register. +// +//***************************************************************************** +#define USB_RQPKTCOUNT4_COUNT_M 0x0000FFFF // Block Transfer Packet Count +#define USB_RQPKTCOUNT4_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RQPKTCOUNT5 +// register. +// +//***************************************************************************** +#define USB_RQPKTCOUNT5_COUNT_M 0x0000FFFF // Block Transfer Packet Count +#define USB_RQPKTCOUNT5_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RQPKTCOUNT6 +// register. +// +//***************************************************************************** +#define USB_RQPKTCOUNT6_COUNT_M 0x0000FFFF // Block Transfer Packet Count +#define USB_RQPKTCOUNT6_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RQPKTCOUNT7 +// register. +// +//***************************************************************************** +#define USB_RQPKTCOUNT7_COUNT_M 0x0000FFFF // Block Transfer Packet Count +#define USB_RQPKTCOUNT7_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RQPKTCOUNT8 +// register. +// +//***************************************************************************** +#define USB_RQPKTCOUNT8_COUNT_M 0x0000FFFF // Block Transfer Packet Count +#define USB_RQPKTCOUNT8_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RQPKTCOUNT9 +// register. +// +//***************************************************************************** +#define USB_RQPKTCOUNT9_COUNT_M 0x0000FFFF // Block Transfer Packet Count +#define USB_RQPKTCOUNT9_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RQPKTCOUNT10 +// register. +// +//***************************************************************************** +#define USB_RQPKTCOUNT10_COUNT_M \ + 0x0000FFFF // Block Transfer Packet Count +#define USB_RQPKTCOUNT10_COUNT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RQPKTCOUNT11 +// register. +// +//***************************************************************************** +#define USB_RQPKTCOUNT11_COUNT_M \ + 0x0000FFFF // Block Transfer Packet Count +#define USB_RQPKTCOUNT11_COUNT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RQPKTCOUNT12 +// register. +// +//***************************************************************************** +#define USB_RQPKTCOUNT12_COUNT_M \ + 0x0000FFFF // Block Transfer Packet Count +#define USB_RQPKTCOUNT12_COUNT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RQPKTCOUNT13 +// register. +// +//***************************************************************************** +#define USB_RQPKTCOUNT13_COUNT_M \ + 0x0000FFFF // Block Transfer Packet Count +#define USB_RQPKTCOUNT13_COUNT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RQPKTCOUNT14 +// register. +// +//***************************************************************************** +#define USB_RQPKTCOUNT14_COUNT_M \ + 0x0000FFFF // Block Transfer Packet Count +#define USB_RQPKTCOUNT14_COUNT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RQPKTCOUNT15 +// register. +// +//***************************************************************************** +#define USB_RQPKTCOUNT15_COUNT_M \ + 0x0000FFFF // Block Transfer Packet Count +#define USB_RQPKTCOUNT15_COUNT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXDPKTBUFDIS +// register. +// +//***************************************************************************** +#define USB_RXDPKTBUFDIS_EP15 0x00008000 // EP15 RX Double-Packet Buffer + // Disable +#define USB_RXDPKTBUFDIS_EP14 0x00004000 // EP14 RX Double-Packet Buffer + // Disable +#define USB_RXDPKTBUFDIS_EP13 0x00002000 // EP13 RX Double-Packet Buffer + // Disable +#define USB_RXDPKTBUFDIS_EP12 0x00001000 // EP12 RX Double-Packet Buffer + // Disable +#define USB_RXDPKTBUFDIS_EP11 0x00000800 // EP11 RX Double-Packet Buffer + // Disable +#define USB_RXDPKTBUFDIS_EP10 0x00000400 // EP10 RX Double-Packet Buffer + // Disable +#define USB_RXDPKTBUFDIS_EP9 0x00000200 // EP9 RX Double-Packet Buffer + // Disable +#define USB_RXDPKTBUFDIS_EP8 0x00000100 // EP8 RX Double-Packet Buffer + // Disable +#define USB_RXDPKTBUFDIS_EP7 0x00000080 // EP7 RX Double-Packet Buffer + // Disable +#define USB_RXDPKTBUFDIS_EP6 0x00000040 // EP6 RX Double-Packet Buffer + // Disable +#define USB_RXDPKTBUFDIS_EP5 0x00000020 // EP5 RX Double-Packet Buffer + // Disable +#define USB_RXDPKTBUFDIS_EP4 0x00000010 // EP4 RX Double-Packet Buffer + // Disable +#define USB_RXDPKTBUFDIS_EP3 0x00000008 // EP3 RX Double-Packet Buffer + // Disable +#define USB_RXDPKTBUFDIS_EP2 0x00000004 // EP2 RX Double-Packet Buffer + // Disable +#define USB_RXDPKTBUFDIS_EP1 0x00000002 // EP1 RX Double-Packet Buffer + // Disable + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXDPKTBUFDIS +// register. +// +//***************************************************************************** +#define USB_TXDPKTBUFDIS_EP15 0x00008000 // EP15 TX Double-Packet Buffer + // Disable +#define USB_TXDPKTBUFDIS_EP14 0x00004000 // EP14 TX Double-Packet Buffer + // Disable +#define USB_TXDPKTBUFDIS_EP13 0x00002000 // EP13 TX Double-Packet Buffer + // Disable +#define USB_TXDPKTBUFDIS_EP12 0x00001000 // EP12 TX Double-Packet Buffer + // Disable +#define USB_TXDPKTBUFDIS_EP11 0x00000800 // EP11 TX Double-Packet Buffer + // Disable +#define USB_TXDPKTBUFDIS_EP10 0x00000400 // EP10 TX Double-Packet Buffer + // Disable +#define USB_TXDPKTBUFDIS_EP9 0x00000200 // EP9 TX Double-Packet Buffer + // Disable +#define USB_TXDPKTBUFDIS_EP8 0x00000100 // EP8 TX Double-Packet Buffer + // Disable +#define USB_TXDPKTBUFDIS_EP7 0x00000080 // EP7 TX Double-Packet Buffer + // Disable +#define USB_TXDPKTBUFDIS_EP6 0x00000040 // EP6 TX Double-Packet Buffer + // Disable +#define USB_TXDPKTBUFDIS_EP5 0x00000020 // EP5 TX Double-Packet Buffer + // Disable +#define USB_TXDPKTBUFDIS_EP4 0x00000010 // EP4 TX Double-Packet Buffer + // Disable +#define USB_TXDPKTBUFDIS_EP3 0x00000008 // EP3 TX Double-Packet Buffer + // Disable +#define USB_TXDPKTBUFDIS_EP2 0x00000004 // EP2 TX Double-Packet Buffer + // Disable +#define USB_TXDPKTBUFDIS_EP1 0x00000002 // EP1 TX Double-Packet Buffer + // Disable + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_EPC register. +// +//***************************************************************************** +#define USB_EPC_PFLTACT_M 0x00000300 // Power Fault Action +#define USB_EPC_PFLTACT_UNCHG 0x00000000 // Unchanged +#define USB_EPC_PFLTACT_TRIS 0x00000100 // Tristate +#define USB_EPC_PFLTACT_LOW 0x00000200 // Low +#define USB_EPC_PFLTACT_HIGH 0x00000300 // High +#define USB_EPC_PFLTAEN 0x00000040 // Power Fault Action Enable +#define USB_EPC_PFLTSEN_HIGH 0x00000020 // Power Fault Sense +#define USB_EPC_PFLTEN 0x00000010 // Power Fault Input Enable +#define USB_EPC_EPENDE 0x00000004 // EPEN Drive Enable +#define USB_EPC_EPEN_M 0x00000003 // External Power Supply Enable + // Configuration +#define USB_EPC_EPEN_LOW 0x00000000 // Power Enable Active Low +#define USB_EPC_EPEN_HIGH 0x00000001 // Power Enable Active High +#define USB_EPC_EPEN_VBLOW 0x00000002 // Power Enable High if VBUS Low +#define USB_EPC_EPEN_VBHIGH 0x00000003 // Power Enable High if VBUS High + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_EPCRIS register. +// +//***************************************************************************** +#define USB_EPCRIS_PF 0x00000001 // USB Power Fault Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_EPCIM register. +// +//***************************************************************************** +#define USB_EPCIM_PF 0x00000001 // USB Power Fault Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_EPCISC register. +// +//***************************************************************************** +#define USB_EPCISC_PF 0x00000001 // USB Power Fault Interrupt Status + // and Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DRRIS register. +// +//***************************************************************************** +#define USB_DRRIS_RESUME 0x00000001 // RESUME Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DRIM register. +// +//***************************************************************************** +#define USB_DRIM_RESUME 0x00000001 // RESUME Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DRISC register. +// +//***************************************************************************** +#define USB_DRISC_RESUME 0x00000001 // RESUME Interrupt Status and + // Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_GPCS register. +// +//***************************************************************************** +#define USB_GPCS_DEVMODOTG 0x00000002 // Enable Device Mode +#define USB_GPCS_DEVMOD 0x00000001 // Device Mode + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_VDC register. +// +//***************************************************************************** +#define USB_VDC_VBDEN 0x00000001 // VBUS Droop Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_VDCRIS register. +// +//***************************************************************************** +#define USB_VDCRIS_VD 0x00000001 // VBUS Droop Raw Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_VDCIM register. +// +//***************************************************************************** +#define USB_VDCIM_VD 0x00000001 // VBUS Droop Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_VDCISC register. +// +//***************************************************************************** +#define USB_VDCISC_VD 0x00000001 // VBUS Droop Interrupt Status and + // Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_IDVRIS register. +// +//***************************************************************************** +#define USB_IDVRIS_ID 0x00000001 // ID Valid Detect Raw Interrupt + // Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_IDVIM register. +// +//***************************************************************************** +#define USB_IDVIM_ID 0x00000001 // ID Valid Detect Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_IDVISC register. +// +//***************************************************************************** +#define USB_IDVISC_ID 0x00000001 // ID Valid Detect Interrupt Status + // and Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMASEL register. +// +//***************************************************************************** +#define USB_DMASEL_DMACTX_M 0x00F00000 // DMA C TX Select +#define USB_DMASEL_DMACRX_M 0x000F0000 // DMA C RX Select +#define USB_DMASEL_DMABTX_M 0x0000F000 // DMA B TX Select +#define USB_DMASEL_DMABRX_M 0x00000F00 // DMA B RX Select +#define USB_DMASEL_DMAATX_M 0x000000F0 // DMA A TX Select +#define USB_DMASEL_DMAARX_M 0x0000000F // DMA A RX Select +#define USB_DMASEL_DMABTX_S 12 +#define USB_DMASEL_DMABRX_S 8 +#define USB_DMASEL_DMAATX_S 4 +#define USB_DMASEL_DMAARX_S 0 + +//***************************************************************************** +// +// The following definitions are deprecated. +// +//***************************************************************************** +#ifndef DEPRECATED + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the +// USB_O_TXFIFOADD register. +// +//***************************************************************************** +#define USB_TXFIFOADD_ADDR_2048 0x00000009 // 2048 +#define USB_TXFIFOADD_ADDR_1024 0x00000008 // 1024 +#define USB_TXFIFOADD_ADDR_512 0x00000007 // 512 +#define USB_TXFIFOADD_ADDR_256 0x00000006 // 256 +#define USB_TXFIFOADD_ADDR_128 0x00000005 // 128 +#define USB_TXFIFOADD_ADDR_64 0x00000004 // 64 +#define USB_TXFIFOADD_ADDR_32 0x00000003 // 32 +#define USB_TXFIFOADD_ADDR_16 0x00000002 // 16 +#define USB_TXFIFOADD_ADDR_8 0x00000001 // 8 +#define USB_TXFIFOADD_ADDR_0 0x00000000 // 0 + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the +// USB_O_RXFIFOADD register. +// +//***************************************************************************** +#define USB_RXFIFOADD_ADDR_2048 0x00000009 // 2048 +#define USB_RXFIFOADD_ADDR_1024 0x00000008 // 1024 +#define USB_RXFIFOADD_ADDR_512 0x00000007 // 512 +#define USB_RXFIFOADD_ADDR_256 0x00000006 // 256 +#define USB_RXFIFOADD_ADDR_128 0x00000005 // 128 +#define USB_RXFIFOADD_ADDR_64 0x00000004 // 64 +#define USB_RXFIFOADD_ADDR_32 0x00000003 // 32 +#define USB_RXFIFOADD_ADDR_16 0x00000002 // 16 +#define USB_RXFIFOADD_ADDR_8 0x00000001 // 8 +#define USB_RXFIFOADD_ADDR_0 0x00000000 // 0 + +#endif + +#endif // __HW_USB_H__ diff --git a/bsp/lm3s_9b9x/Libraries/inc/hw_watchdog.h b/bsp/lm3s_9b9x/Libraries/inc/hw_watchdog.h new file mode 100644 index 0000000000000000000000000000000000000000..9b52ffc70033accf626e039c815f3f5c700bb599 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/inc/hw_watchdog.h @@ -0,0 +1,175 @@ +//***************************************************************************** +// +// hw_watchdog.h - Macros used when accessing the Watchdog Timer hardware. +// +// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_WATCHDOG_H__ +#define __HW_WATCHDOG_H__ + +//***************************************************************************** +// +// The following are defines for the Watchdog Timer register offsets. +// +//***************************************************************************** +#define WDT_O_LOAD 0x00000000 // Watchdog Load +#define WDT_O_VALUE 0x00000004 // Watchdog Value +#define WDT_O_CTL 0x00000008 // Watchdog Control +#define WDT_O_ICR 0x0000000C // Watchdog Interrupt Clear +#define WDT_O_RIS 0x00000010 // Watchdog Raw Interrupt Status +#define WDT_O_MIS 0x00000014 // Watchdog Masked Interrupt Status +#define WDT_O_TEST 0x00000418 // Watchdog Test +#define WDT_O_LOCK 0x00000C00 // Watchdog Lock + +//***************************************************************************** +// +// The following are defines for the bit fields in the WDT_O_LOAD register. +// +//***************************************************************************** +#define WDT_LOAD_M 0xFFFFFFFF // Watchdog Load Value +#define WDT_LOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the WDT_O_VALUE register. +// +//***************************************************************************** +#define WDT_VALUE_M 0xFFFFFFFF // Watchdog Value +#define WDT_VALUE_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the WDT_O_CTL register. +// +//***************************************************************************** +#define WDT_CTL_WRC 0x80000000 // Write Complete +#define WDT_CTL_RESEN 0x00000002 // Watchdog Reset Enable +#define WDT_CTL_INTEN 0x00000001 // Watchdog Interrupt Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the WDT_O_ICR register. +// +//***************************************************************************** +#define WDT_ICR_M 0xFFFFFFFF // Watchdog Interrupt Clear +#define WDT_ICR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the WDT_O_RIS register. +// +//***************************************************************************** +#define WDT_RIS_WDTRIS 0x00000001 // Watchdog Raw Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the WDT_O_MIS register. +// +//***************************************************************************** +#define WDT_MIS_WDTMIS 0x00000001 // Watchdog Masked Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the WDT_O_TEST register. +// +//***************************************************************************** +#define WDT_TEST_STALL 0x00000100 // Watchdog Stall Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the WDT_O_LOCK register. +// +//***************************************************************************** +#define WDT_LOCK_M 0xFFFFFFFF // Watchdog Lock +#define WDT_LOCK_UNLOCKED 0x00000000 // Unlocked +#define WDT_LOCK_LOCKED 0x00000001 // Locked +#define WDT_LOCK_UNLOCK 0x1ACCE551 // Unlocks the watchdog timer + +//***************************************************************************** +// +// The following are defines for the bit fields in the WDT_ISR, WDT_RIS, and +// WDT_MIS registers. +// +//***************************************************************************** +#define WDT_INT_TIMEOUT 0x00000001 // Watchdog timer expired + +//***************************************************************************** +// +// The following definitions are deprecated. +// +//***************************************************************************** +#ifndef DEPRECATED + +//***************************************************************************** +// +// The following are deprecated defines for the Watchdog Timer register +// offsets. +// +//***************************************************************************** +#define WDT_O_PeriphID4 0x00000FD0 +#define WDT_O_PeriphID5 0x00000FD4 +#define WDT_O_PeriphID6 0x00000FD8 +#define WDT_O_PeriphID7 0x00000FDC +#define WDT_O_PeriphID0 0x00000FE0 +#define WDT_O_PeriphID1 0x00000FE4 +#define WDT_O_PeriphID2 0x00000FE8 +#define WDT_O_PeriphID3 0x00000FEC +#define WDT_O_PCellID0 0x00000FF0 +#define WDT_O_PCellID1 0x00000FF4 +#define WDT_O_PCellID2 0x00000FF8 +#define WDT_O_PCellID3 0x00000FFC + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the WDT_O_TEST +// register. +// +//***************************************************************************** +#define WDT_TEST_STALL_EN 0x00000100 // Watchdog stall enable + +//***************************************************************************** +// +// The following are deprecated defines for the reset values for the WDT +// registers. +// +//***************************************************************************** +#define WDT_RV_VALUE 0xFFFFFFFF // Current value register +#define WDT_RV_LOAD 0xFFFFFFFF // Load register +#define WDT_RV_PCellID1 0x000000F0 +#define WDT_RV_PCellID3 0x000000B1 +#define WDT_RV_PeriphID1 0x00000018 +#define WDT_RV_PeriphID2 0x00000018 +#define WDT_RV_PCellID0 0x0000000D +#define WDT_RV_PCellID2 0x00000005 +#define WDT_RV_PeriphID0 0x00000005 +#define WDT_RV_PeriphID3 0x00000001 +#define WDT_RV_PeriphID5 0x00000000 +#define WDT_RV_RIS 0x00000000 // Raw interrupt status register +#define WDT_RV_CTL 0x00000000 // Control register +#define WDT_RV_PeriphID4 0x00000000 +#define WDT_RV_PeriphID6 0x00000000 +#define WDT_RV_PeriphID7 0x00000000 +#define WDT_RV_LOCK 0x00000000 // Lock register +#define WDT_RV_MIS 0x00000000 // Masked interrupt status register + +#endif + +#endif // __HW_WATCHDOG_H__ diff --git a/bsp/lm3s_9b9x/Libraries/inc/inc.sgxx b/bsp/lm3s_9b9x/Libraries/inc/inc.sgxx new file mode 100644 index 0000000000000000000000000000000000000000..68b958950b392334da84e2b886b48f5caf35803e Binary files /dev/null and b/bsp/lm3s_9b9x/Libraries/inc/inc.sgxx differ diff --git a/bsp/lm3s_9b9x/Libraries/inc/lm3s8962.h b/bsp/lm3s_9b9x/Libraries/inc/lm3s8962.h new file mode 100644 index 0000000000000000000000000000000000000000..4e9aa86be606b6e5c96f6bc9f6509f0b08d3eb95 --- /dev/null +++ b/bsp/lm3s_9b9x/Libraries/inc/lm3s8962.h @@ -0,0 +1,5034 @@ +//***************************************************************************** +// +// lm3s8962.h - LM3S8962 Register Definitions +// +// Copyright (c) 2007-2010 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +// This is part of revision 6459 of the Stellaris Firmware Development Package. +// +//***************************************************************************** + +#ifndef __LM3S8962_H__ +#define __LM3S8962_H__ + +//***************************************************************************** +// +// Watchdog Timer registers (WATCHDOG0) +// +//***************************************************************************** +#define WATCHDOG0_LOAD_R (*((volatile unsigned long *)0x40000000)) +#define WATCHDOG0_VALUE_R (*((volatile unsigned long *)0x40000004)) +#define WATCHDOG0_CTL_R (*((volatile unsigned long *)0x40000008)) +#define WATCHDOG0_ICR_R (*((volatile unsigned long *)0x4000000C)) +#define WATCHDOG0_RIS_R (*((volatile unsigned long *)0x40000010)) +#define WATCHDOG0_MIS_R (*((volatile unsigned long *)0x40000014)) +#define WATCHDOG0_TEST_R (*((volatile unsigned long *)0x40000418)) +#define WATCHDOG0_LOCK_R (*((volatile unsigned long *)0x40000C00)) + +//***************************************************************************** +// +// GPIO registers (PORTA) +// +//***************************************************************************** +#define GPIO_PORTA_DATA_BITS_R ((volatile unsigned long *)0x40004000) +#define GPIO_PORTA_DATA_R (*((volatile unsigned long *)0x400043FC)) +#define GPIO_PORTA_DIR_R (*((volatile unsigned long *)0x40004400)) +#define GPIO_PORTA_IS_R (*((volatile unsigned long *)0x40004404)) +#define GPIO_PORTA_IBE_R (*((volatile unsigned long *)0x40004408)) +#define GPIO_PORTA_IEV_R (*((volatile unsigned long *)0x4000440C)) +#define GPIO_PORTA_IM_R (*((volatile unsigned long *)0x40004410)) +#define GPIO_PORTA_RIS_R (*((volatile unsigned long *)0x40004414)) +#define GPIO_PORTA_MIS_R (*((volatile unsigned long *)0x40004418)) +#define GPIO_PORTA_ICR_R (*((volatile unsigned long *)0x4000441C)) +#define GPIO_PORTA_AFSEL_R (*((volatile unsigned long *)0x40004420)) +#define GPIO_PORTA_DR2R_R (*((volatile unsigned long *)0x40004500)) +#define GPIO_PORTA_DR4R_R (*((volatile unsigned long *)0x40004504)) +#define GPIO_PORTA_DR8R_R (*((volatile unsigned long *)0x40004508)) +#define GPIO_PORTA_ODR_R (*((volatile unsigned long *)0x4000450C)) +#define GPIO_PORTA_PUR_R (*((volatile unsigned long *)0x40004510)) +#define GPIO_PORTA_PDR_R (*((volatile unsigned long *)0x40004514)) +#define GPIO_PORTA_SLR_R (*((volatile unsigned long *)0x40004518)) +#define GPIO_PORTA_DEN_R (*((volatile unsigned long *)0x4000451C)) +#define GPIO_PORTA_LOCK_R (*((volatile unsigned long *)0x40004520)) +#define GPIO_PORTA_CR_R (*((volatile unsigned long *)0x40004524)) + +//***************************************************************************** +// +// GPIO registers (PORTB) +// +//***************************************************************************** +#define GPIO_PORTB_DATA_BITS_R ((volatile unsigned long *)0x40005000) +#define GPIO_PORTB_DATA_R (*((volatile unsigned long *)0x400053FC)) +#define GPIO_PORTB_DIR_R (*((volatile unsigned long *)0x40005400)) +#define GPIO_PORTB_IS_R (*((volatile unsigned long *)0x40005404)) +#define GPIO_PORTB_IBE_R (*((volatile unsigned long *)0x40005408)) +#define GPIO_PORTB_IEV_R (*((volatile unsigned long *)0x4000540C)) +#define GPIO_PORTB_IM_R (*((volatile unsigned long *)0x40005410)) +#define GPIO_PORTB_RIS_R (*((volatile unsigned long *)0x40005414)) +#define GPIO_PORTB_MIS_R (*((volatile unsigned long *)0x40005418)) +#define GPIO_PORTB_ICR_R (*((volatile unsigned long *)0x4000541C)) +#define GPIO_PORTB_AFSEL_R (*((volatile unsigned long *)0x40005420)) +#define GPIO_PORTB_DR2R_R (*((volatile unsigned long *)0x40005500)) +#define GPIO_PORTB_DR4R_R (*((volatile unsigned long *)0x40005504)) +#define GPIO_PORTB_DR8R_R (*((volatile unsigned long *)0x40005508)) +#define GPIO_PORTB_ODR_R (*((volatile unsigned long *)0x4000550C)) +#define GPIO_PORTB_PUR_R (*((volatile unsigned long *)0x40005510)) +#define GPIO_PORTB_PDR_R (*((volatile unsigned long *)0x40005514)) +#define GPIO_PORTB_SLR_R (*((volatile unsigned long *)0x40005518)) +#define GPIO_PORTB_DEN_R (*((volatile unsigned long *)0x4000551C)) +#define GPIO_PORTB_LOCK_R (*((volatile unsigned long *)0x40005520)) +#define GPIO_PORTB_CR_R (*((volatile unsigned long *)0x40005524)) + +//***************************************************************************** +// +// GPIO registers (PORTC) +// +//***************************************************************************** +#define GPIO_PORTC_DATA_BITS_R ((volatile unsigned long *)0x40006000) +#define GPIO_PORTC_DATA_R (*((volatile unsigned long *)0x400063FC)) +#define GPIO_PORTC_DIR_R (*((volatile unsigned long *)0x40006400)) +#define GPIO_PORTC_IS_R (*((volatile unsigned long *)0x40006404)) +#define GPIO_PORTC_IBE_R (*((volatile unsigned long *)0x40006408)) +#define GPIO_PORTC_IEV_R (*((volatile unsigned long *)0x4000640C)) +#define GPIO_PORTC_IM_R (*((volatile unsigned long *)0x40006410)) +#define GPIO_PORTC_RIS_R (*((volatile unsigned long *)0x40006414)) +#define GPIO_PORTC_MIS_R (*((volatile unsigned long *)0x40006418)) +#define GPIO_PORTC_ICR_R (*((volatile unsigned long *)0x4000641C)) +#define GPIO_PORTC_AFSEL_R (*((volatile unsigned long *)0x40006420)) +#define GPIO_PORTC_DR2R_R (*((volatile unsigned long *)0x40006500)) +#define GPIO_PORTC_DR4R_R (*((volatile unsigned long *)0x40006504)) +#define GPIO_PORTC_DR8R_R (*((volatile unsigned long *)0x40006508)) +#define GPIO_PORTC_ODR_R (*((volatile unsigned long *)0x4000650C)) +#define GPIO_PORTC_PUR_R (*((volatile unsigned long *)0x40006510)) +#define GPIO_PORTC_PDR_R (*((volatile unsigned long *)0x40006514)) +#define GPIO_PORTC_SLR_R (*((volatile unsigned long *)0x40006518)) +#define GPIO_PORTC_DEN_R (*((volatile unsigned long *)0x4000651C)) +#define GPIO_PORTC_LOCK_R (*((volatile unsigned long *)0x40006520)) +#define GPIO_PORTC_CR_R (*((volatile unsigned long *)0x40006524)) + +//***************************************************************************** +// +// GPIO registers (PORTD) +// +//***************************************************************************** +#define GPIO_PORTD_DATA_BITS_R ((volatile unsigned long *)0x40007000) +#define GPIO_PORTD_DATA_R (*((volatile unsigned long *)0x400073FC)) +#define GPIO_PORTD_DIR_R (*((volatile unsigned long *)0x40007400)) +#define GPIO_PORTD_IS_R (*((volatile unsigned long *)0x40007404)) +#define GPIO_PORTD_IBE_R (*((volatile unsigned long *)0x40007408)) +#define GPIO_PORTD_IEV_R (*((volatile unsigned long *)0x4000740C)) +#define GPIO_PORTD_IM_R (*((volatile unsigned long *)0x40007410)) +#define GPIO_PORTD_RIS_R (*((volatile unsigned long *)0x40007414)) +#define GPIO_PORTD_MIS_R (*((volatile unsigned long *)0x40007418)) +#define GPIO_PORTD_ICR_R (*((volatile unsigned long *)0x4000741C)) +#define GPIO_PORTD_AFSEL_R (*((volatile unsigned long *)0x40007420)) +#define GPIO_PORTD_DR2R_R (*((volatile unsigned long *)0x40007500)) +#define GPIO_PORTD_DR4R_R (*((volatile unsigned long *)0x40007504)) +#define GPIO_PORTD_DR8R_R (*((volatile unsigned long *)0x40007508)) +#define GPIO_PORTD_ODR_R (*((volatile unsigned long *)0x4000750C)) +#define GPIO_PORTD_PUR_R (*((volatile unsigned long *)0x40007510)) +#define GPIO_PORTD_PDR_R (*((volatile unsigned long *)0x40007514)) +#define GPIO_PORTD_SLR_R (*((volatile unsigned long *)0x40007518)) +#define GPIO_PORTD_DEN_R (*((volatile unsigned long *)0x4000751C)) +#define GPIO_PORTD_LOCK_R (*((volatile unsigned long *)0x40007520)) +#define GPIO_PORTD_CR_R (*((volatile unsigned long *)0x40007524)) + +//***************************************************************************** +// +// SSI registers (SSI0) +// +//***************************************************************************** +#define SSI0_CR0_R (*((volatile unsigned long *)0x40008000)) +#define SSI0_CR1_R (*((volatile unsigned long *)0x40008004)) +#define SSI0_DR_R (*((volatile unsigned long *)0x40008008)) +#define SSI0_SR_R (*((volatile unsigned long *)0x4000800C)) +#define SSI0_CPSR_R (*((volatile unsigned long *)0x40008010)) +#define SSI0_IM_R (*((volatile unsigned long *)0x40008014)) +#define SSI0_RIS_R (*((volatile unsigned long *)0x40008018)) +#define SSI0_MIS_R (*((volatile unsigned long *)0x4000801C)) +#define SSI0_ICR_R (*((volatile unsigned long *)0x40008020)) + +//***************************************************************************** +// +// UART registers (UART0) +// +//***************************************************************************** +#define UART0_DR_R (*((volatile unsigned long *)0x4000C000)) +#define UART0_RSR_R (*((volatile unsigned long *)0x4000C004)) +#define UART0_ECR_R (*((volatile unsigned long *)0x4000C004)) +#define UART0_FR_R (*((volatile unsigned long *)0x4000C018)) +#define UART0_ILPR_R (*((volatile unsigned long *)0x4000C020)) +#define UART0_IBRD_R (*((volatile unsigned long *)0x4000C024)) +#define UART0_FBRD_R (*((volatile unsigned long *)0x4000C028)) +#define UART0_LCRH_R (*((volatile unsigned long *)0x4000C02C)) +#define UART0_CTL_R (*((volatile unsigned long *)0x4000C030)) +#define UART0_IFLS_R (*((volatile unsigned long *)0x4000C034)) +#define UART0_IM_R (*((volatile unsigned long *)0x4000C038)) +#define UART0_RIS_R (*((volatile unsigned long *)0x4000C03C)) +#define UART0_MIS_R (*((volatile unsigned long *)0x4000C040)) +#define UART0_ICR_R (*((volatile unsigned long *)0x4000C044)) + +//***************************************************************************** +// +// UART registers (UART1) +// +//***************************************************************************** +#define UART1_DR_R (*((volatile unsigned long *)0x4000D000)) +#define UART1_RSR_R (*((volatile unsigned long *)0x4000D004)) +#define UART1_ECR_R (*((volatile unsigned long *)0x4000D004)) +#define UART1_FR_R (*((volatile unsigned long *)0x4000D018)) +#define UART1_ILPR_R (*((volatile unsigned long *)0x4000D020)) +#define UART1_IBRD_R (*((volatile unsigned long *)0x4000D024)) +#define UART1_FBRD_R (*((volatile unsigned long *)0x4000D028)) +#define UART1_LCRH_R (*((volatile unsigned long *)0x4000D02C)) +#define UART1_CTL_R (*((volatile unsigned long *)0x4000D030)) +#define UART1_IFLS_R (*((volatile unsigned long *)0x4000D034)) +#define UART1_IM_R (*((volatile unsigned long *)0x4000D038)) +#define UART1_RIS_R (*((volatile unsigned long *)0x4000D03C)) +#define UART1_MIS_R (*((volatile unsigned long *)0x4000D040)) +#define UART1_ICR_R (*((volatile unsigned long *)0x4000D044)) + +//***************************************************************************** +// +// I2C registers (I2C0 MASTER) +// +//***************************************************************************** +#define I2C0_MASTER_MSA_R (*((volatile unsigned long *)0x40020000)) +#define I2C0_MASTER_SOAR_R (*((volatile unsigned long *)0x40020000)) +#define I2C0_MASTER_SCSR_R (*((volatile unsigned long *)0x40020004)) +#define I2C0_MASTER_MCS_R (*((volatile unsigned long *)0x40020004)) +#define I2C0_MASTER_SDR_R (*((volatile unsigned long *)0x40020008)) +#define I2C0_MASTER_MDR_R (*((volatile unsigned long *)0x40020008)) +#define I2C0_MASTER_MTPR_R (*((volatile unsigned long *)0x4002000C)) +#define I2C0_MASTER_SIMR_R (*((volatile unsigned long *)0x4002000C)) +#define I2C0_MASTER_SRIS_R (*((volatile unsigned long *)0x40020010)) +#define I2C0_MASTER_MIMR_R (*((volatile unsigned long *)0x40020010)) +#define I2C0_MASTER_MRIS_R (*((volatile unsigned long *)0x40020014)) +#define I2C0_MASTER_SMIS_R (*((volatile unsigned long *)0x40020014)) +#define I2C0_MASTER_SICR_R (*((volatile unsigned long *)0x40020018)) +#define I2C0_MASTER_MMIS_R (*((volatile unsigned long *)0x40020018)) +#define I2C0_MASTER_MICR_R (*((volatile unsigned long *)0x4002001C)) +#define I2C0_MASTER_MCR_R (*((volatile unsigned long *)0x40020020)) + +//***************************************************************************** +// +// I2C registers (I2C0 SLAVE) +// +//***************************************************************************** +#define I2C0_SLAVE_MSA_R (*((volatile unsigned long *)0x40020800)) +#define I2C0_SLAVE_SOAR_R (*((volatile unsigned long *)0x40020800)) +#define I2C0_SLAVE_SCSR_R (*((volatile unsigned long *)0x40020804)) +#define I2C0_SLAVE_MCS_R (*((volatile unsigned long *)0x40020804)) +#define I2C0_SLAVE_SDR_R (*((volatile unsigned long *)0x40020808)) +#define I2C0_SLAVE_MDR_R (*((volatile unsigned long *)0x40020808)) +#define I2C0_SLAVE_MTPR_R (*((volatile unsigned long *)0x4002080C)) +#define I2C0_SLAVE_SIMR_R (*((volatile unsigned long *)0x4002080C)) +#define I2C0_SLAVE_SRIS_R (*((volatile unsigned long *)0x40020810)) +#define I2C0_SLAVE_MIMR_R (*((volatile unsigned long *)0x40020810)) +#define I2C0_SLAVE_MRIS_R (*((volatile unsigned long *)0x40020814)) +#define I2C0_SLAVE_SMIS_R (*((volatile unsigned long *)0x40020814)) +#define I2C0_SLAVE_SICR_R (*((volatile unsigned long *)0x40020818)) +#define I2C0_SLAVE_MMIS_R (*((volatile unsigned long *)0x40020818)) +#define I2C0_SLAVE_MICR_R (*((volatile unsigned long *)0x4002081C)) +#define I2C0_SLAVE_MCR_R (*((volatile unsigned long *)0x40020820)) + +//***************************************************************************** +// +// GPIO registers (PORTE) +// +//***************************************************************************** +#define GPIO_PORTE_DATA_BITS_R ((volatile unsigned long *)0x40024000) +#define GPIO_PORTE_DATA_R (*((volatile unsigned long *)0x400243FC)) +#define GPIO_PORTE_DIR_R (*((volatile unsigned long *)0x40024400)) +#define GPIO_PORTE_IS_R (*((volatile unsigned long *)0x40024404)) +#define GPIO_PORTE_IBE_R (*((volatile unsigned long *)0x40024408)) +#define GPIO_PORTE_IEV_R (*((volatile unsigned long *)0x4002440C)) +#define GPIO_PORTE_IM_R (*((volatile unsigned long *)0x40024410)) +#define GPIO_PORTE_RIS_R (*((volatile unsigned long *)0x40024414)) +#define GPIO_PORTE_MIS_R (*((volatile unsigned long *)0x40024418)) +#define GPIO_PORTE_ICR_R (*((volatile unsigned long *)0x4002441C)) +#define GPIO_PORTE_AFSEL_R (*((volatile unsigned long *)0x40024420)) +#define GPIO_PORTE_DR2R_R (*((volatile unsigned long *)0x40024500)) +#define GPIO_PORTE_DR4R_R (*((volatile unsigned long *)0x40024504)) +#define GPIO_PORTE_DR8R_R (*((volatile unsigned long *)0x40024508)) +#define GPIO_PORTE_ODR_R (*((volatile unsigned long *)0x4002450C)) +#define GPIO_PORTE_PUR_R (*((volatile unsigned long *)0x40024510)) +#define GPIO_PORTE_PDR_R (*((volatile unsigned long *)0x40024514)) +#define GPIO_PORTE_SLR_R (*((volatile unsigned long *)0x40024518)) +#define GPIO_PORTE_DEN_R (*((volatile unsigned long *)0x4002451C)) +#define GPIO_PORTE_LOCK_R (*((volatile unsigned long *)0x40024520)) +#define GPIO_PORTE_CR_R (*((volatile unsigned long *)0x40024524)) + +//***************************************************************************** +// +// GPIO registers (PORTF) +// +//***************************************************************************** +#define GPIO_PORTF_DATA_BITS_R ((volatile unsigned long *)0x40025000) +#define GPIO_PORTF_DATA_R (*((volatile unsigned long *)0x400253FC)) +#define GPIO_PORTF_DIR_R (*((volatile unsigned long *)0x40025400)) +#define GPIO_PORTF_IS_R (*((volatile unsigned long *)0x40025404)) +#define GPIO_PORTF_IBE_R (*((volatile unsigned long *)0x40025408)) +#define GPIO_PORTF_IEV_R (*((volatile unsigned long *)0x4002540C)) +#define GPIO_PORTF_IM_R (*((volatile unsigned long *)0x40025410)) +#define GPIO_PORTF_RIS_R (*((volatile unsigned long *)0x40025414)) +#define GPIO_PORTF_MIS_R (*((volatile unsigned long *)0x40025418)) +#define GPIO_PORTF_ICR_R (*((volatile unsigned long *)0x4002541C)) +#define GPIO_PORTF_AFSEL_R (*((volatile unsigned long *)0x40025420)) +#define GPIO_PORTF_DR2R_R (*((volatile unsigned long *)0x40025500)) +#define GPIO_PORTF_DR4R_R (*((volatile unsigned long *)0x40025504)) +#define GPIO_PORTF_DR8R_R (*((volatile unsigned long *)0x40025508)) +#define GPIO_PORTF_ODR_R (*((volatile unsigned long *)0x4002550C)) +#define GPIO_PORTF_PUR_R (*((volatile unsigned long *)0x40025510)) +#define GPIO_PORTF_PDR_R (*((volatile unsigned long *)0x40025514)) +#define GPIO_PORTF_SLR_R (*((volatile unsigned long *)0x40025518)) +#define GPIO_PORTF_DEN_R (*((volatile unsigned long *)0x4002551C)) +#define GPIO_PORTF_LOCK_R (*((volatile unsigned long *)0x40025520)) +#define GPIO_PORTF_CR_R (*((volatile unsigned long *)0x40025524)) + +//***************************************************************************** +// +// GPIO registers (PORTG) +// +//***************************************************************************** +#define GPIO_PORTG_DATA_BITS_R ((volatile unsigned long *)0x40026000) +#define GPIO_PORTG_DATA_R (*((volatile unsigned long *)0x400263FC)) +#define GPIO_PORTG_DIR_R (*((volatile unsigned long *)0x40026400)) +#define GPIO_PORTG_IS_R (*((volatile unsigned long *)0x40026404)) +#define GPIO_PORTG_IBE_R (*((volatile unsigned long *)0x40026408)) +#define GPIO_PORTG_IEV_R (*((volatile unsigned long *)0x4002640C)) +#define GPIO_PORTG_IM_R (*((volatile unsigned long *)0x40026410)) +#define GPIO_PORTG_RIS_R (*((volatile unsigned long *)0x40026414)) +#define GPIO_PORTG_MIS_R (*((volatile unsigned long *)0x40026418)) +#define GPIO_PORTG_ICR_R (*((volatile unsigned long *)0x4002641C)) +#define GPIO_PORTG_AFSEL_R (*((volatile unsigned long *)0x40026420)) +#define GPIO_PORTG_DR2R_R (*((volatile unsigned long *)0x40026500)) +#define GPIO_PORTG_DR4R_R (*((volatile unsigned long *)0x40026504)) +#define GPIO_PORTG_DR8R_R (*((volatile unsigned long *)0x40026508)) +#define GPIO_PORTG_ODR_R (*((volatile unsigned long *)0x4002650C)) +#define GPIO_PORTG_PUR_R (*((volatile unsigned long *)0x40026510)) +#define GPIO_PORTG_PDR_R (*((volatile unsigned long *)0x40026514)) +#define GPIO_PORTG_SLR_R (*((volatile unsigned long *)0x40026518)) +#define GPIO_PORTG_DEN_R (*((volatile unsigned long *)0x4002651C)) +#define GPIO_PORTG_LOCK_R (*((volatile unsigned long *)0x40026520)) +#define GPIO_PORTG_CR_R (*((volatile unsigned long *)0x40026524)) + +//***************************************************************************** +// +// PWM registers (PWM) +// +//***************************************************************************** +#define PWM_CTL_R (*((volatile unsigned long *)0x40028000)) +#define PWM_SYNC_R (*((volatile unsigned long *)0x40028004)) +#define PWM_ENABLE_R (*((volatile unsigned long *)0x40028008)) +#define PWM_INVERT_R (*((volatile unsigned long *)0x4002800C)) +#define PWM_FAULT_R (*((volatile unsigned long *)0x40028010)) +#define PWM_INTEN_R (*((volatile unsigned long *)0x40028014)) +#define PWM_RIS_R (*((volatile unsigned long *)0x40028018)) +#define PWM_ISC_R (*((volatile unsigned long *)0x4002801C)) +#define PWM_STATUS_R (*((volatile unsigned long *)0x40028020)) +#define PWM_0_CTL_R (*((volatile unsigned long *)0x40028040)) +#define PWM_0_INTEN_R (*((volatile unsigned long *)0x40028044)) +#define PWM_0_RIS_R (*((volatile unsigned long *)0x40028048)) +#define PWM_0_ISC_R (*((volatile unsigned long *)0x4002804C)) +#define PWM_0_LOAD_R (*((volatile unsigned long *)0x40028050)) +#define PWM_0_COUNT_R (*((volatile unsigned long *)0x40028054)) +#define PWM_0_CMPA_R (*((volatile unsigned long *)0x40028058)) +#define PWM_0_CMPB_R (*((volatile unsigned long *)0x4002805C)) +#define PWM_0_GENA_R (*((volatile unsigned long *)0x40028060)) +#define PWM_0_GENB_R (*((volatile unsigned long *)0x40028064)) +#define PWM_0_DBCTL_R (*((volatile unsigned long *)0x40028068)) +#define PWM_0_DBRISE_R (*((volatile unsigned long *)0x4002806C)) +#define PWM_0_DBFALL_R (*((volatile unsigned long *)0x40028070)) +#define PWM_1_CTL_R (*((volatile unsigned long *)0x40028080)) +#define PWM_1_INTEN_R (*((volatile unsigned long *)0x40028084)) +#define PWM_1_RIS_R (*((volatile unsigned long *)0x40028088)) +#define PWM_1_ISC_R (*((volatile unsigned long *)0x4002808C)) +#define PWM_1_LOAD_R (*((volatile unsigned long *)0x40028090)) +#define PWM_1_COUNT_R (*((volatile unsigned long *)0x40028094)) +#define PWM_1_CMPA_R (*((volatile unsigned long *)0x40028098)) +#define PWM_1_CMPB_R (*((volatile unsigned long *)0x4002809C)) +#define PWM_1_GENA_R (*((volatile unsigned long *)0x400280A0)) +#define PWM_1_GENB_R (*((volatile unsigned long *)0x400280A4)) +#define PWM_1_DBCTL_R (*((volatile unsigned long *)0x400280A8)) +#define PWM_1_DBRISE_R (*((volatile unsigned long *)0x400280AC)) +#define PWM_1_DBFALL_R (*((volatile unsigned long *)0x400280B0)) +#define PWM_2_CTL_R (*((volatile unsigned long *)0x400280C0)) +#define PWM_2_INTEN_R (*((volatile unsigned long *)0x400280C4)) +#define PWM_2_RIS_R (*((volatile unsigned long *)0x400280C8)) +#define PWM_2_ISC_R (*((volatile unsigned long *)0x400280CC)) +#define PWM_2_LOAD_R (*((volatile unsigned long *)0x400280D0)) +#define PWM_2_COUNT_R (*((volatile unsigned long *)0x400280D4)) +#define PWM_2_CMPA_R (*((volatile unsigned long *)0x400280D8)) +#define PWM_2_CMPB_R (*((volatile unsigned long *)0x400280DC)) +#define PWM_2_GENA_R (*((volatile unsigned long *)0x400280E0)) +#define PWM_2_GENB_R (*((volatile unsigned long *)0x400280E4)) +#define PWM_2_DBCTL_R (*((volatile unsigned long *)0x400280E8)) +#define PWM_2_DBRISE_R (*((volatile unsigned long *)0x400280EC)) +#define PWM_2_DBFALL_R (*((volatile unsigned long *)0x400280F0)) + +//***************************************************************************** +// +// QEI registers (QEI0) +// +//***************************************************************************** +#define QEI0_CTL_R (*((volatile unsigned long *)0x4002C000)) +#define QEI0_STAT_R (*((volatile unsigned long *)0x4002C004)) +#define QEI0_POS_R (*((volatile unsigned long *)0x4002C008)) +#define QEI0_MAXPOS_R (*((volatile unsigned long *)0x4002C00C)) +#define QEI0_LOAD_R (*((volatile unsigned long *)0x4002C010)) +#define QEI0_TIME_R (*((volatile unsigned long *)0x4002C014)) +#define QEI0_COUNT_R (*((volatile unsigned long *)0x4002C018)) +#define QEI0_SPEED_R (*((volatile unsigned long *)0x4002C01C)) +#define QEI0_INTEN_R (*((volatile unsigned long *)0x4002C020)) +#define QEI0_RIS_R (*((volatile unsigned long *)0x4002C024)) +#define QEI0_ISC_R (*((volatile unsigned long *)0x4002C028)) + +//***************************************************************************** +// +// QEI registers (QEI1) +// +//***************************************************************************** +#define QEI1_CTL_R (*((volatile unsigned long *)0x4002D000)) +#define QEI1_STAT_R (*((volatile unsigned long *)0x4002D004)) +#define QEI1_POS_R (*((volatile unsigned long *)0x4002D008)) +#define QEI1_MAXPOS_R (*((volatile unsigned long *)0x4002D00C)) +#define QEI1_LOAD_R (*((volatile unsigned long *)0x4002D010)) +#define QEI1_TIME_R (*((volatile unsigned long *)0x4002D014)) +#define QEI1_COUNT_R (*((volatile unsigned long *)0x4002D018)) +#define QEI1_SPEED_R (*((volatile unsigned long *)0x4002D01C)) +#define QEI1_INTEN_R (*((volatile unsigned long *)0x4002D020)) +#define QEI1_RIS_R (*((volatile unsigned long *)0x4002D024)) +#define QEI1_ISC_R (*((volatile unsigned long *)0x4002D028)) + +//***************************************************************************** +// +// Timer registers (TIMER0) +// +//***************************************************************************** +#define TIMER0_CFG_R (*((volatile unsigned long *)0x40030000)) +#define TIMER0_TAMR_R (*((volatile unsigned long *)0x40030004)) +#define TIMER0_TBMR_R (*((volatile unsigned long *)0x40030008)) +#define TIMER0_CTL_R (*((volatile unsigned long *)0x4003000C)) +#define TIMER0_IMR_R (*((volatile unsigned long *)0x40030018)) +#define TIMER0_RIS_R (*((volatile unsigned long *)0x4003001C)) +#define TIMER0_MIS_R (*((volatile unsigned long *)0x40030020)) +#define TIMER0_ICR_R (*((volatile unsigned long *)0x40030024)) +#define TIMER0_TAILR_R (*((volatile unsigned long *)0x40030028)) +#define TIMER0_TBILR_R (*((volatile unsigned long *)0x4003002C)) +#define TIMER0_TAMATCHR_R (*((volatile unsigned long *)0x40030030)) +#define TIMER0_TBMATCHR_R (*((volatile unsigned long *)0x40030034)) +#define TIMER0_TAPR_R (*((volatile unsigned long *)0x40030038)) +#define TIMER0_TBPR_R (*((volatile unsigned long *)0x4003003C)) +#define TIMER0_TAPMR_R (*((volatile unsigned long *)0x40030040)) +#define TIMER0_TBPMR_R (*((volatile unsigned long *)0x40030044)) +#define TIMER0_TAR_R (*((volatile unsigned long *)0x40030048)) +#define TIMER0_TBR_R (*((volatile unsigned long *)0x4003004C)) + +//***************************************************************************** +// +// Timer registers (TIMER1) +// +//***************************************************************************** +#define TIMER1_CFG_R (*((volatile unsigned long *)0x40031000)) +#define TIMER1_TAMR_R (*((volatile unsigned long *)0x40031004)) +#define TIMER1_TBMR_R (*((volatile unsigned long *)0x40031008)) +#define TIMER1_CTL_R (*((volatile unsigned long *)0x4003100C)) +#define TIMER1_IMR_R (*((volatile unsigned long *)0x40031018)) +#define TIMER1_RIS_R (*((volatile unsigned long *)0x4003101C)) +#define TIMER1_MIS_R (*((volatile unsigned long *)0x40031020)) +#define TIMER1_ICR_R (*((volatile unsigned long *)0x40031024)) +#define TIMER1_TAILR_R (*((volatile unsigned long *)0x40031028)) +#define TIMER1_TBILR_R (*((volatile unsigned long *)0x4003102C)) +#define TIMER1_TAMATCHR_R (*((volatile unsigned long *)0x40031030)) +#define TIMER1_TBMATCHR_R (*((volatile unsigned long *)0x40031034)) +#define TIMER1_TAPR_R (*((volatile unsigned long *)0x40031038)) +#define TIMER1_TBPR_R (*((volatile unsigned long *)0x4003103C)) +#define TIMER1_TAPMR_R (*((volatile unsigned long *)0x40031040)) +#define TIMER1_TBPMR_R (*((volatile unsigned long *)0x40031044)) +#define TIMER1_TAR_R (*((volatile unsigned long *)0x40031048)) +#define TIMER1_TBR_R (*((volatile unsigned long *)0x4003104C)) + +//***************************************************************************** +// +// Timer registers (TIMER2) +// +//***************************************************************************** +#define TIMER2_CFG_R (*((volatile unsigned long *)0x40032000)) +#define TIMER2_TAMR_R (*((volatile unsigned long *)0x40032004)) +#define TIMER2_TBMR_R (*((volatile unsigned long *)0x40032008)) +#define TIMER2_CTL_R (*((volatile unsigned long *)0x4003200C)) +#define TIMER2_IMR_R (*((volatile unsigned long *)0x40032018)) +#define TIMER2_RIS_R (*((volatile unsigned long *)0x4003201C)) +#define TIMER2_MIS_R (*((volatile unsigned long *)0x40032020)) +#define TIMER2_ICR_R (*((volatile unsigned long *)0x40032024)) +#define TIMER2_TAILR_R (*((volatile unsigned long *)0x40032028)) +#define TIMER2_TBILR_R (*((volatile unsigned long *)0x4003202C)) +#define TIMER2_TAMATCHR_R (*((volatile unsigned long *)0x40032030)) +#define TIMER2_TBMATCHR_R (*((volatile unsigned long *)0x40032034)) +#define TIMER2_TAPR_R (*((volatile unsigned long *)0x40032038)) +#define TIMER2_TBPR_R (*((volatile unsigned long *)0x4003203C)) +#define TIMER2_TAPMR_R (*((volatile unsigned long *)0x40032040)) +#define TIMER2_TBPMR_R (*((volatile unsigned long *)0x40032044)) +#define TIMER2_TAR_R (*((volatile unsigned long *)0x40032048)) +#define TIMER2_TBR_R (*((volatile unsigned long *)0x4003204C)) + +//***************************************************************************** +// +// Timer registers (TIMER3) +// +//***************************************************************************** +#define TIMER3_CFG_R (*((volatile unsigned long *)0x40033000)) +#define TIMER3_TAMR_R (*((volatile unsigned long *)0x40033004)) +#define TIMER3_TBMR_R (*((volatile unsigned long *)0x40033008)) +#define TIMER3_CTL_R (*((volatile unsigned long *)0x4003300C)) +#define TIMER3_IMR_R (*((volatile unsigned long *)0x40033018)) +#define TIMER3_RIS_R (*((volatile unsigned long *)0x4003301C)) +#define TIMER3_MIS_R (*((volatile unsigned long *)0x40033020)) +#define TIMER3_ICR_R (*((volatile unsigned long *)0x40033024)) +#define TIMER3_TAILR_R (*((volatile unsigned long *)0x40033028)) +#define TIMER3_TBILR_R (*((volatile unsigned long *)0x4003302C)) +#define TIMER3_TAMATCHR_R (*((volatile unsigned long *)0x40033030)) +#define TIMER3_TBMATCHR_R (*((volatile unsigned long *)0x40033034)) +#define TIMER3_TAPR_R (*((volatile unsigned long *)0x40033038)) +#define TIMER3_TBPR_R (*((volatile unsigned long *)0x4003303C)) +#define TIMER3_TAPMR_R (*((volatile unsigned long *)0x40033040)) +#define TIMER3_TBPMR_R (*((volatile unsigned long *)0x40033044)) +#define TIMER3_TAR_R (*((volatile unsigned long *)0x40033048)) +#define TIMER3_TBR_R (*((volatile unsigned long *)0x4003304C)) + +//***************************************************************************** +// +// ADC registers (ADC0) +// +//***************************************************************************** +#define ADC0_ACTSS_R (*((volatile unsigned long *)0x40038000)) +#define ADC0_RIS_R (*((volatile unsigned long *)0x40038004)) +#define ADC0_IM_R (*((volatile unsigned long *)0x40038008)) +#define ADC0_ISC_R (*((volatile unsigned long *)0x4003800C)) +#define ADC0_OSTAT_R (*((volatile unsigned long *)0x40038010)) +#define ADC0_EMUX_R (*((volatile unsigned long *)0x40038014)) +#define ADC0_USTAT_R (*((volatile unsigned long *)0x40038018)) +#define ADC0_SSPRI_R (*((volatile unsigned long *)0x40038020)) +#define ADC0_PSSI_R (*((volatile unsigned long *)0x40038028)) +#define ADC0_SAC_R (*((volatile unsigned long *)0x40038030)) +#define ADC0_SSMUX0_R (*((volatile unsigned long *)0x40038040)) +#define ADC0_SSCTL0_R (*((volatile unsigned long *)0x40038044)) +#define ADC0_SSFIFO0_R (*((volatile unsigned long *)0x40038048)) +#define ADC0_SSFSTAT0_R (*((volatile unsigned long *)0x4003804C)) +#define ADC0_SSMUX1_R (*((volatile unsigned long *)0x40038060)) +#define ADC0_SSCTL1_R (*((volatile unsigned long *)0x40038064)) +#define ADC0_SSFIFO1_R (*((volatile unsigned long *)0x40038068)) +#define ADC0_SSFSTAT1_R (*((volatile unsigned long *)0x4003806C)) +#define ADC0_SSMUX2_R (*((volatile unsigned long *)0x40038080)) +#define ADC0_SSCTL2_R (*((volatile unsigned long *)0x40038084)) +#define ADC0_SSFIFO2_R (*((volatile unsigned long *)0x40038088)) +#define ADC0_SSFSTAT2_R (*((volatile unsigned long *)0x4003808C)) +#define ADC0_SSMUX3_R (*((volatile unsigned long *)0x400380A0)) +#define ADC0_SSCTL3_R (*((volatile unsigned long *)0x400380A4)) +#define ADC0_SSFIFO3_R (*((volatile unsigned long *)0x400380A8)) +#define ADC0_SSFSTAT3_R (*((volatile unsigned long *)0x400380AC)) +#define ADC0_TMLB_R (*((volatile unsigned long *)0x40038100)) + +//***************************************************************************** +// +// Comparator registers (COMP) +// +//***************************************************************************** +#define COMP_ACMIS_R (*((volatile unsigned long *)0x4003C000)) +#define COMP_ACRIS_R (*((volatile unsigned long *)0x4003C004)) +#define COMP_ACINTEN_R (*((volatile unsigned long *)0x4003C008)) +#define COMP_ACREFCTL_R (*((volatile unsigned long *)0x4003C010)) +#define COMP_ACSTAT0_R (*((volatile unsigned long *)0x4003C020)) +#define COMP_ACCTL0_R (*((volatile unsigned long *)0x4003C024)) + +//***************************************************************************** +// +// CAN registers (CAN0) +// +//***************************************************************************** +#define CAN0_CTL_R (*((volatile unsigned long *)0x40040000)) +#define CAN0_STS_R (*((volatile unsigned long *)0x40040004)) +#define CAN0_ERR_R (*((volatile unsigned long *)0x40040008)) +#define CAN0_BIT_R (*((volatile unsigned long *)0x4004000C)) +#define CAN0_INT_R (*((volatile unsigned long *)0x40040010)) +#define CAN0_TST_R (*((volatile unsigned long *)0x40040014)) +#define CAN0_BRPE_R (*((volatile unsigned long *)0x40040018)) +#define CAN0_IF1CRQ_R (*((volatile unsigned long *)0x40040020)) +#define CAN0_IF1CMSK_R (*((volatile unsigned long *)0x40040024)) +#define CAN0_IF1MSK1_R (*((volatile unsigned long *)0x40040028)) +#define CAN0_IF1MSK2_R (*((volatile unsigned long *)0x4004002C)) +#define CAN0_IF1ARB1_R (*((volatile unsigned long *)0x40040030)) +#define CAN0_IF1ARB2_R (*((volatile unsigned long *)0x40040034)) +#define CAN0_IF1MCTL_R (*((volatile unsigned long *)0x40040038)) +#define CAN0_IF1DA1_R (*((volatile unsigned long *)0x4004003C)) +#define CAN0_IF1DA2_R (*((volatile unsigned long *)0x40040040)) +#define CAN0_IF1DB1_R (*((volatile unsigned long *)0x40040044)) +#define CAN0_IF1DB2_R (*((volatile unsigned long *)0x40040048)) +#define CAN0_IF2CRQ_R (*((volatile unsigned long *)0x40040080)) +#define CAN0_IF2CMSK_R (*((volatile unsigned long *)0x40040084)) +#define CAN0_IF2MSK1_R (*((volatile unsigned long *)0x40040088)) +#define CAN0_IF2MSK2_R (*((volatile unsigned long *)0x4004008C)) +#define CAN0_IF2ARB1_R (*((volatile unsigned long *)0x40040090)) +#define CAN0_IF2ARB2_R (*((volatile unsigned long *)0x40040094)) +#define CAN0_IF2MCTL_R (*((volatile unsigned long *)0x40040098)) +#define CAN0_IF2DA1_R (*((volatile unsigned long *)0x4004009C)) +#define CAN0_IF2DA2_R (*((volatile unsigned long *)0x400400A0)) +#define CAN0_IF2DB1_R (*((volatile unsigned long *)0x400400A4)) +#define CAN0_IF2DB2_R (*((volatile unsigned long *)0x400400A8)) +#define CAN0_TXRQ1_R (*((volatile unsigned long *)0x40040100)) +#define CAN0_TXRQ2_R (*((volatile unsigned long *)0x40040104)) +#define CAN0_NWDA1_R (*((volatile unsigned long *)0x40040120)) +#define CAN0_NWDA2_R (*((volatile unsigned long *)0x40040124)) +#define CAN0_MSG1INT_R (*((volatile unsigned long *)0x40040140)) +#define CAN0_MSG2INT_R (*((volatile unsigned long *)0x40040144)) +#define CAN0_MSG1VAL_R (*((volatile unsigned long *)0x40040160)) +#define CAN0_MSG2VAL_R (*((volatile unsigned long *)0x40040164)) + +//***************************************************************************** +// +// Ethernet MAC registers (MAC) +// +//***************************************************************************** +#define MAC_RIS_R (*((volatile unsigned long *)0x40048000)) +#define MAC_IACK_R (*((volatile unsigned long *)0x40048000)) +#define MAC_IM_R (*((volatile unsigned long *)0x40048004)) +#define MAC_RCTL_R (*((volatile unsigned long *)0x40048008)) +#define MAC_TCTL_R (*((volatile unsigned long *)0x4004800C)) +#define MAC_DATA_R (*((volatile unsigned long *)0x40048010)) +#define MAC_IA0_R (*((volatile unsigned long *)0x40048014)) +#define MAC_IA1_R (*((volatile unsigned long *)0x40048018)) +#define MAC_THR_R (*((volatile unsigned long *)0x4004801C)) +#define MAC_MCTL_R (*((volatile unsigned long *)0x40048020)) +#define MAC_MDV_R (*((volatile unsigned long *)0x40048024)) +#define MAC_MTXD_R (*((volatile unsigned long *)0x4004802C)) +#define MAC_MRXD_R (*((volatile unsigned long *)0x40048030)) +#define MAC_NP_R (*((volatile unsigned long *)0x40048034)) +#define MAC_TR_R (*((volatile unsigned long *)0x40048038)) +#define MAC_TS_R (*((volatile unsigned long *)0x4004803C)) + +//***************************************************************************** +// +// Ethernet Controller PHY registers (MAC) +// +//***************************************************************************** +#define PHY_MR0 0x00000000 // Ethernet PHY Management Register + // 0 - Control +#define PHY_MR1 0x00000001 // Ethernet PHY Management Register + // 1 - Status +#define PHY_MR2 0x00000002 // Ethernet PHY Management Register + // 2 - PHY Identifier 1 +#define PHY_MR3 0x00000003 // Ethernet PHY Management Register + // 3 - PHY Identifier 2 +#define PHY_MR4 0x00000004 // Ethernet PHY Management Register + // 4 - Auto-Negotiation + // Advertisement +#define PHY_MR5 0x00000005 // Ethernet PHY Management Register + // 5 - Auto-Negotiation Link + // Partner Base Page Ability +#define PHY_MR6 0x00000006 // Ethernet PHY Management Register + // 6 - Auto-Negotiation Expansion +#define PHY_MR16 0x00000010 // Ethernet PHY Management Register + // 16 - Vendor-Specific +#define PHY_MR17 0x00000011 // Ethernet PHY Management Register + // 17 - Mode Control/Status +#define PHY_MR18 0x00000012 // Ethernet PHY Management Register + // 18 - Diagnostic +#define PHY_MR19 0x00000013 // Ethernet PHY Management Register + // 19 - Transceiver Control +#define PHY_MR23 0x00000017 // Ethernet PHY Management Register + // 23 - LED Configuration +#define PHY_MR24 0x00000018 // Ethernet PHY Management Register + // 24 -MDI/MDIX Control + +//***************************************************************************** +// +// Hibernation module registers (HIB) +// +//***************************************************************************** +#define HIB_RTCC_R (*((volatile unsigned long *)0x400FC000)) +#define HIB_RTCM0_R (*((volatile unsigned long *)0x400FC004)) +#define HIB_RTCM1_R (*((volatile unsigned long *)0x400FC008)) +#define HIB_RTCLD_R (*((volatile unsigned long *)0x400FC00C)) +#define HIB_CTL_R (*((volatile unsigned long *)0x400FC010)) +#define HIB_IM_R (*((volatile unsigned long *)0x400FC014)) +#define HIB_RIS_R (*((volatile unsigned long *)0x400FC018)) +#define HIB_MIS_R (*((volatile unsigned long *)0x400FC01C)) +#define HIB_IC_R (*((volatile unsigned long *)0x400FC020)) +#define HIB_RTCT_R (*((volatile unsigned long *)0x400FC024)) +#define HIB_DATA_R (*((volatile unsigned long *)0x400FC030)) + +//***************************************************************************** +// +// FLASH registers (FLASH CTRL) +// +//***************************************************************************** +#define FLASH_FMA_R (*((volatile unsigned long *)0x400FD000)) +#define FLASH_FMD_R (*((volatile unsigned long *)0x400FD004)) +#define FLASH_FMC_R (*((volatile unsigned long *)0x400FD008)) +#define FLASH_FCRIS_R (*((volatile unsigned long *)0x400FD00C)) +#define FLASH_FCIM_R (*((volatile unsigned long *)0x400FD010)) +#define FLASH_FCMISC_R (*((volatile unsigned long *)0x400FD014)) +#define FLASH_USECRL_R (*((volatile unsigned long *)0x400FE140)) +#define FLASH_USERDBG_R (*((volatile unsigned long *)0x400FE1D0)) +#define FLASH_USERREG0_R (*((volatile unsigned long *)0x400FE1E0)) +#define FLASH_USERREG1_R (*((volatile unsigned long *)0x400FE1E4)) +#define FLASH_FMPRE0_R (*((volatile unsigned long *)0x400FE200)) +#define FLASH_FMPRE1_R (*((volatile unsigned long *)0x400FE204)) +#define FLASH_FMPRE2_R (*((volatile unsigned long *)0x400FE208)) +#define FLASH_FMPRE3_R (*((volatile unsigned long *)0x400FE20C)) +#define FLASH_FMPPE0_R (*((volatile unsigned long *)0x400FE400)) +#define FLASH_FMPPE1_R (*((volatile unsigned long *)0x400FE404)) +#define FLASH_FMPPE2_R (*((volatile unsigned long *)0x400FE408)) +#define FLASH_FMPPE3_R (*((volatile unsigned long *)0x400FE40C)) + +//***************************************************************************** +// +// System Control registers (SYSCTL) +// +//***************************************************************************** +#define SYSCTL_DID0_R (*((volatile unsigned long *)0x400FE000)) +#define SYSCTL_DID1_R (*((volatile unsigned long *)0x400FE004)) +#define SYSCTL_DC0_R (*((volatile unsigned long *)0x400FE008)) +#define SYSCTL_DC1_R (*((volatile unsigned long *)0x400FE010)) +#define SYSCTL_DC2_R (*((volatile unsigned long *)0x400FE014)) +#define SYSCTL_DC3_R (*((volatile unsigned long *)0x400FE018)) +#define SYSCTL_DC4_R (*((volatile unsigned long *)0x400FE01C)) +#define SYSCTL_PBORCTL_R (*((volatile unsigned long *)0x400FE030)) +#define SYSCTL_LDOPCTL_R (*((volatile unsigned long *)0x400FE034)) +#define SYSCTL_SRCR0_R (*((volatile unsigned long *)0x400FE040)) +#define SYSCTL_SRCR1_R (*((volatile unsigned long *)0x400FE044)) +#define SYSCTL_SRCR2_R (*((volatile unsigned long *)0x400FE048)) +#define SYSCTL_RIS_R (*((volatile unsigned long *)0x400FE050)) +#define SYSCTL_IMC_R (*((volatile unsigned long *)0x400FE054)) +#define SYSCTL_MISC_R (*((volatile unsigned long *)0x400FE058)) +#define SYSCTL_RESC_R (*((volatile unsigned long *)0x400FE05C)) +#define SYSCTL_RCC_R (*((volatile unsigned long *)0x400FE060)) +#define SYSCTL_PLLCFG_R (*((volatile unsigned long *)0x400FE064)) +#define SYSCTL_RCC2_R (*((volatile unsigned long *)0x400FE070)) +#define SYSCTL_RCGC0_R (*((volatile unsigned long *)0x400FE100)) +#define SYSCTL_RCGC1_R (*((volatile unsigned long *)0x400FE104)) +#define SYSCTL_RCGC2_R (*((volatile unsigned long *)0x400FE108)) +#define SYSCTL_SCGC0_R (*((volatile unsigned long *)0x400FE110)) +#define SYSCTL_SCGC1_R (*((volatile unsigned long *)0x400FE114)) +#define SYSCTL_SCGC2_R (*((volatile unsigned long *)0x400FE118)) +#define SYSCTL_DCGC0_R (*((volatile unsigned long *)0x400FE120)) +#define SYSCTL_DCGC1_R (*((volatile unsigned long *)0x400FE124)) +#define SYSCTL_DCGC2_R (*((volatile unsigned long *)0x400FE128)) +#define SYSCTL_DSLPCLKCFG_R (*((volatile unsigned long *)0x400FE144)) + +//***************************************************************************** +// +// NVIC registers (NVIC) +// +//***************************************************************************** +#define NVIC_INT_TYPE_R (*((volatile unsigned long *)0xE000E004)) +#define NVIC_ST_CTRL_R (*((volatile unsigned long *)0xE000E010)) +#define NVIC_ST_RELOAD_R (*((volatile unsigned long *)0xE000E014)) +#define NVIC_ST_CURRENT_R (*((volatile unsigned long *)0xE000E018)) +#define NVIC_ST_CAL_R (*((volatile unsigned long *)0xE000E01C)) +#define NVIC_EN0_R (*((volatile unsigned long *)0xE000E100)) +#define NVIC_EN1_R (*((volatile unsigned long *)0xE000E104)) +#define NVIC_DIS0_R (*((volatile unsigned long *)0xE000E180)) +#define NVIC_DIS1_R (*((volatile unsigned long *)0xE000E184)) +#define NVIC_PEND0_R (*((volatile unsigned long *)0xE000E200)) +#define NVIC_PEND1_R (*((volatile unsigned long *)0xE000E204)) +#define NVIC_UNPEND0_R (*((volatile unsigned long *)0xE000E280)) +#define NVIC_UNPEND1_R (*((volatile unsigned long *)0xE000E284)) +#define NVIC_ACTIVE0_R (*((volatile unsigned long *)0xE000E300)) +#define NVIC_ACTIVE1_R (*((volatile unsigned long *)0xE000E304)) +#define NVIC_PRI0_R (*((volatile unsigned long *)0xE000E400)) +#define NVIC_PRI1_R (*((volatile unsigned long *)0xE000E404)) +#define NVIC_PRI2_R (*((volatile unsigned long *)0xE000E408)) +#define NVIC_PRI3_R (*((volatile unsigned long *)0xE000E40C)) +#define NVIC_PRI4_R (*((volatile unsigned long *)0xE000E410)) +#define NVIC_PRI5_R (*((volatile unsigned long *)0xE000E414)) +#define NVIC_PRI6_R (*((volatile unsigned long *)0xE000E418)) +#define NVIC_PRI7_R (*((volatile unsigned long *)0xE000E41C)) +#define NVIC_PRI8_R (*((volatile unsigned long *)0xE000E420)) +#define NVIC_PRI9_R (*((volatile unsigned long *)0xE000E424)) +#define NVIC_PRI10_R (*((volatile unsigned long *)0xE000E428)) +#define NVIC_CPUID_R (*((volatile unsigned long *)0xE000ED00)) +#define NVIC_INT_CTRL_R (*((volatile unsigned long *)0xE000ED04)) +#define NVIC_VTABLE_R (*((volatile unsigned long *)0xE000ED08)) +#define NVIC_APINT_R (*((volatile unsigned long *)0xE000ED0C)) +#define NVIC_SYS_CTRL_R (*((volatile unsigned long *)0xE000ED10)) +#define NVIC_CFG_CTRL_R (*((volatile unsigned long *)0xE000ED14)) +#define NVIC_SYS_PRI1_R (*((volatile unsigned long *)0xE000ED18)) +#define NVIC_SYS_PRI2_R (*((volatile unsigned long *)0xE000ED1C)) +#define NVIC_SYS_PRI3_R (*((volatile unsigned long *)0xE000ED20)) +#define NVIC_SYS_HND_CTRL_R (*((volatile unsigned long *)0xE000ED24)) +#define NVIC_FAULT_STAT_R (*((volatile unsigned long *)0xE000ED28)) +#define NVIC_HFAULT_STAT_R (*((volatile unsigned long *)0xE000ED2C)) +#define NVIC_DEBUG_STAT_R (*((volatile unsigned long *)0xE000ED30)) +#define NVIC_MM_ADDR_R (*((volatile unsigned long *)0xE000ED34)) +#define NVIC_FAULT_ADDR_R (*((volatile unsigned long *)0xE000ED38)) +#define NVIC_MPU_TYPE_R (*((volatile unsigned long *)0xE000ED90)) +#define NVIC_MPU_CTRL_R (*((volatile unsigned long *)0xE000ED94)) +#define NVIC_MPU_NUMBER_R (*((volatile unsigned long *)0xE000ED98)) +#define NVIC_MPU_BASE_R (*((volatile unsigned long *)0xE000ED9C)) +#define NVIC_MPU_ATTR_R (*((volatile unsigned long *)0xE000EDA0)) +#define NVIC_DBG_CTRL_R (*((volatile unsigned long *)0xE000EDF0)) +#define NVIC_DBG_XFER_R (*((volatile unsigned long *)0xE000EDF4)) +#define NVIC_DBG_DATA_R (*((volatile unsigned long *)0xE000EDF8)) +#define NVIC_DBG_INT_R (*((volatile unsigned long *)0xE000EDFC)) +#define NVIC_SW_TRIG_R (*((volatile unsigned long *)0xE000EF00)) + +//***************************************************************************** +// +// The following are defines for the bit fields in the WDT_O_LOAD register. +// +//***************************************************************************** +#define WDT_LOAD_M 0xFFFFFFFF // Watchdog Load Value +#define WDT_LOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the WDT_O_VALUE register. +// +//***************************************************************************** +#define WDT_VALUE_M 0xFFFFFFFF // Watchdog Value +#define WDT_VALUE_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the WDT_O_CTL register. +// +//***************************************************************************** +#define WDT_CTL_RESEN 0x00000002 // Watchdog Reset Enable +#define WDT_CTL_INTEN 0x00000001 // Watchdog Interrupt Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the WDT_O_ICR register. +// +//***************************************************************************** +#define WDT_ICR_M 0xFFFFFFFF // Watchdog Interrupt Clear +#define WDT_ICR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the WDT_O_RIS register. +// +//***************************************************************************** +#define WDT_RIS_WDTRIS 0x00000001 // Watchdog Raw Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the WDT_O_MIS register. +// +//***************************************************************************** +#define WDT_MIS_WDTMIS 0x00000001 // Watchdog Masked Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the WDT_O_TEST register. +// +//***************************************************************************** +#define WDT_TEST_STALL 0x00000100 // Watchdog Stall Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the WDT_O_LOCK register. +// +//***************************************************************************** +#define WDT_LOCK_M 0xFFFFFFFF // Watchdog Lock +#define WDT_LOCK_UNLOCKED 0x00000000 // Unlocked +#define WDT_LOCK_LOCKED 0x00000001 // Locked +#define WDT_LOCK_UNLOCK 0x1ACCE551 // Unlocks the watchdog timer + +//***************************************************************************** +// +// The following are defines for the bit fields in the GPIO_O_LOCK register. +// +//***************************************************************************** +#define GPIO_LOCK_M 0xFFFFFFFF // GPIO Lock +#define GPIO_LOCK_UNLOCKED 0x00000000 // The GPIOCR register is unlocked + // and may be modified +#define GPIO_LOCK_LOCKED 0x00000001 // The GPIOCR register is locked + // and may not be modified +#define GPIO_LOCK_KEY 0x1ACCE551 // Unlocks the GPIO_CR register + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_CR0 register. +// +//***************************************************************************** +#define SSI_CR0_SCR_M 0x0000FF00 // SSI Serial Clock Rate +#define SSI_CR0_SPH 0x00000080 // SSI Serial Clock Phase +#define SSI_CR0_SPO 0x00000040 // SSI Serial Clock Polarity +#define SSI_CR0_FRF_M 0x00000030 // SSI Frame Format Select +#define SSI_CR0_FRF_MOTO 0x00000000 // Freescale SPI Frame Format +#define SSI_CR0_FRF_TI 0x00000010 // Texas Instruments Synchronous + // Serial Frame Format +#define SSI_CR0_FRF_NMW 0x00000020 // MICROWIRE Frame Format +#define SSI_CR0_DSS_M 0x0000000F // SSI Data Size Select +#define SSI_CR0_DSS_4 0x00000003 // 4-bit data +#define SSI_CR0_DSS_5 0x00000004 // 5-bit data +#define SSI_CR0_DSS_6 0x00000005 // 6-bit data +#define SSI_CR0_DSS_7 0x00000006 // 7-bit data +#define SSI_CR0_DSS_8 0x00000007 // 8-bit data +#define SSI_CR0_DSS_9 0x00000008 // 9-bit data +#define SSI_CR0_DSS_10 0x00000009 // 10-bit data +#define SSI_CR0_DSS_11 0x0000000A // 11-bit data +#define SSI_CR0_DSS_12 0x0000000B // 12-bit data +#define SSI_CR0_DSS_13 0x0000000C // 13-bit data +#define SSI_CR0_DSS_14 0x0000000D // 14-bit data +#define SSI_CR0_DSS_15 0x0000000E // 15-bit data +#define SSI_CR0_DSS_16 0x0000000F // 16-bit data +#define SSI_CR0_SCR_S 8 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_CR1 register. +// +//***************************************************************************** +#define SSI_CR1_SOD 0x00000008 // SSI Slave Mode Output Disable +#define SSI_CR1_MS 0x00000004 // SSI Master/Slave Select +#define SSI_CR1_SSE 0x00000002 // SSI Synchronous Serial Port + // Enable +#define SSI_CR1_LBM 0x00000001 // SSI Loopback Mode + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_DR register. +// +//***************************************************************************** +#define SSI_DR_DATA_M 0x0000FFFF // SSI Receive/Transmit Data +#define SSI_DR_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_SR register. +// +//***************************************************************************** +#define SSI_SR_BSY 0x00000010 // SSI Busy Bit +#define SSI_SR_RFF 0x00000008 // SSI Receive FIFO Full +#define SSI_SR_RNE 0x00000004 // SSI Receive FIFO Not Empty +#define SSI_SR_TNF 0x00000002 // SSI Transmit FIFO Not Full +#define SSI_SR_TFE 0x00000001 // SSI Transmit FIFO Empty + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_CPSR register. +// +//***************************************************************************** +#define SSI_CPSR_CPSDVSR_M 0x000000FF // SSI Clock Prescale Divisor +#define SSI_CPSR_CPSDVSR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_IM register. +// +//***************************************************************************** +#define SSI_IM_TXIM 0x00000008 // SSI Transmit FIFO Interrupt Mask +#define SSI_IM_RXIM 0x00000004 // SSI Receive FIFO Interrupt Mask +#define SSI_IM_RTIM 0x00000002 // SSI Receive Time-Out Interrupt + // Mask +#define SSI_IM_RORIM 0x00000001 // SSI Receive Overrun Interrupt + // Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_RIS register. +// +//***************************************************************************** +#define SSI_RIS_TXRIS 0x00000008 // SSI Transmit FIFO Raw Interrupt + // Status +#define SSI_RIS_RXRIS 0x00000004 // SSI Receive FIFO Raw Interrupt + // Status +#define SSI_RIS_RTRIS 0x00000002 // SSI Receive Time-Out Raw + // Interrupt Status +#define SSI_RIS_RORRIS 0x00000001 // SSI Receive Overrun Raw + // Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_MIS register. +// +//***************************************************************************** +#define SSI_MIS_TXMIS 0x00000008 // SSI Transmit FIFO Masked + // Interrupt Status +#define SSI_MIS_RXMIS 0x00000004 // SSI Receive FIFO Masked + // Interrupt Status +#define SSI_MIS_RTMIS 0x00000002 // SSI Receive Time-Out Masked + // Interrupt Status +#define SSI_MIS_RORMIS 0x00000001 // SSI Receive Overrun Masked + // Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_ICR register. +// +//***************************************************************************** +#define SSI_ICR_RTIC 0x00000002 // SSI Receive Time-Out Interrupt + // Clear +#define SSI_ICR_RORIC 0x00000001 // SSI Receive Overrun Interrupt + // Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_DR register. +// +//***************************************************************************** +#define UART_DR_OE 0x00000800 // UART Overrun Error +#define UART_DR_BE 0x00000400 // UART Break Error +#define UART_DR_PE 0x00000200 // UART Parity Error +#define UART_DR_FE 0x00000100 // UART Framing Error +#define UART_DR_DATA_M 0x000000FF // Data Transmitted or Received +#define UART_DR_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_RSR register. +// +//***************************************************************************** +#define UART_RSR_OE 0x00000008 // UART Overrun Error +#define UART_RSR_BE 0x00000004 // UART Break Error +#define UART_RSR_PE 0x00000002 // UART Parity Error +#define UART_RSR_FE 0x00000001 // UART Framing Error + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_ECR register. +// +//***************************************************************************** +#define UART_ECR_DATA_M 0x000000FF // Error Clear +#define UART_ECR_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_FR register. +// +//***************************************************************************** +#define UART_FR_TXFE 0x00000080 // UART Transmit FIFO Empty +#define UART_FR_RXFF 0x00000040 // UART Receive FIFO Full +#define UART_FR_TXFF 0x00000020 // UART Transmit FIFO Full +#define UART_FR_RXFE 0x00000010 // UART Receive FIFO Empty +#define UART_FR_BUSY 0x00000008 // UART Busy + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_ILPR register. +// +//***************************************************************************** +#define UART_ILPR_ILPDVSR_M 0x000000FF // IrDA Low-Power Divisor +#define UART_ILPR_ILPDVSR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_IBRD register. +// +//***************************************************************************** +#define UART_IBRD_DIVINT_M 0x0000FFFF // Integer Baud-Rate Divisor +#define UART_IBRD_DIVINT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_FBRD register. +// +//***************************************************************************** +#define UART_FBRD_DIVFRAC_M 0x0000003F // Fractional Baud-Rate Divisor +#define UART_FBRD_DIVFRAC_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_LCRH register. +// +//***************************************************************************** +#define UART_LCRH_SPS 0x00000080 // UART Stick Parity Select +#define UART_LCRH_WLEN_M 0x00000060 // UART Word Length +#define UART_LCRH_WLEN_5 0x00000000 // 5 bits (default) +#define UART_LCRH_WLEN_6 0x00000020 // 6 bits +#define UART_LCRH_WLEN_7 0x00000040 // 7 bits +#define UART_LCRH_WLEN_8 0x00000060 // 8 bits +#define UART_LCRH_FEN 0x00000010 // UART Enable FIFOs +#define UART_LCRH_STP2 0x00000008 // UART Two Stop Bits Select +#define UART_LCRH_EPS 0x00000004 // UART Even Parity Select +#define UART_LCRH_PEN 0x00000002 // UART Parity Enable +#define UART_LCRH_BRK 0x00000001 // UART Send Break + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_CTL register. +// +//***************************************************************************** +#define UART_CTL_RXE 0x00000200 // UART Receive Enable +#define UART_CTL_TXE 0x00000100 // UART Transmit Enable +#define UART_CTL_LBE 0x00000080 // UART Loop Back Enable +#define UART_CTL_SIRLP 0x00000004 // UART SIR Low-Power Mode +#define UART_CTL_SIREN 0x00000002 // UART SIR Enable +#define UART_CTL_UARTEN 0x00000001 // UART Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_IFLS register. +// +//***************************************************************************** +#define UART_IFLS_RX_M 0x00000038 // UART Receive Interrupt FIFO + // Level Select +#define UART_IFLS_RX1_8 0x00000000 // RX FIFO >= 1/8 full +#define UART_IFLS_RX2_8 0x00000008 // RX FIFO >= 1/4 full +#define UART_IFLS_RX4_8 0x00000010 // RX FIFO >= 1/2 full (default) +#define UART_IFLS_RX6_8 0x00000018 // RX FIFO >= 3/4 full +#define UART_IFLS_RX7_8 0x00000020 // RX FIFO >= 7/8 full +#define UART_IFLS_TX_M 0x00000007 // UART Transmit Interrupt FIFO + // Level Select +#define UART_IFLS_TX1_8 0x00000000 // TX FIFO <= 1/8 full +#define UART_IFLS_TX2_8 0x00000001 // TX FIFO <= 1/4 full +#define UART_IFLS_TX4_8 0x00000002 // TX FIFO <= 1/2 full (default) +#define UART_IFLS_TX6_8 0x00000003 // TX FIFO <= 3/4 full +#define UART_IFLS_TX7_8 0x00000004 // TX FIFO <= 7/8 full + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_IM register. +// +//***************************************************************************** +#define UART_IM_OEIM 0x00000400 // UART Overrun Error Interrupt + // Mask +#define UART_IM_BEIM 0x00000200 // UART Break Error Interrupt Mask +#define UART_IM_PEIM 0x00000100 // UART Parity Error Interrupt Mask +#define UART_IM_FEIM 0x00000080 // UART Framing Error Interrupt + // Mask +#define UART_IM_RTIM 0x00000040 // UART Receive Time-Out Interrupt + // Mask +#define UART_IM_TXIM 0x00000020 // UART Transmit Interrupt Mask +#define UART_IM_RXIM 0x00000010 // UART Receive Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_RIS register. +// +//***************************************************************************** +#define UART_RIS_OERIS 0x00000400 // UART Overrun Error Raw Interrupt + // Status +#define UART_RIS_BERIS 0x00000200 // UART Break Error Raw Interrupt + // Status +#define UART_RIS_PERIS 0x00000100 // UART Parity Error Raw Interrupt + // Status +#define UART_RIS_FERIS 0x00000080 // UART Framing Error Raw Interrupt + // Status +#define UART_RIS_RTRIS 0x00000040 // UART Receive Time-Out Raw + // Interrupt Status +#define UART_RIS_TXRIS 0x00000020 // UART Transmit Raw Interrupt + // Status +#define UART_RIS_RXRIS 0x00000010 // UART Receive Raw Interrupt + // Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_MIS register. +// +//***************************************************************************** +#define UART_MIS_OEMIS 0x00000400 // UART Overrun Error Masked + // Interrupt Status +#define UART_MIS_BEMIS 0x00000200 // UART Break Error Masked + // Interrupt Status +#define UART_MIS_PEMIS 0x00000100 // UART Parity Error Masked + // Interrupt Status +#define UART_MIS_FEMIS 0x00000080 // UART Framing Error Masked + // Interrupt Status +#define UART_MIS_RTMIS 0x00000040 // UART Receive Time-Out Masked + // Interrupt Status +#define UART_MIS_TXMIS 0x00000020 // UART Transmit Masked Interrupt + // Status +#define UART_MIS_RXMIS 0x00000010 // UART Receive Masked Interrupt + // Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_ICR register. +// +//***************************************************************************** +#define UART_ICR_OEIC 0x00000400 // Overrun Error Interrupt Clear +#define UART_ICR_BEIC 0x00000200 // Break Error Interrupt Clear +#define UART_ICR_PEIC 0x00000100 // Parity Error Interrupt Clear +#define UART_ICR_FEIC 0x00000080 // Framing Error Interrupt Clear +#define UART_ICR_RTIC 0x00000040 // Receive Time-Out Interrupt Clear +#define UART_ICR_TXIC 0x00000020 // Transmit Interrupt Clear +#define UART_ICR_RXIC 0x00000010 // Receive Interrupt Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MSA register. +// +//***************************************************************************** +#define I2C_MSA_SA_M 0x000000FE // I2C Slave Address +#define I2C_MSA_RS 0x00000001 // Receive not send +#define I2C_MSA_SA_S 1 + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_SOAR register. +// +//***************************************************************************** +#define I2C_SOAR_OAR_M 0x0000007F // I2C Slave Own Address +#define I2C_SOAR_OAR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_SCSR register. +// +//***************************************************************************** +#define I2C_SCSR_FBR 0x00000004 // First Byte Received +#define I2C_SCSR_TREQ 0x00000002 // Transmit Request +#define I2C_SCSR_DA 0x00000001 // Device Active +#define I2C_SCSR_RREQ 0x00000001 // Receive Request + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MCS register. +// +//***************************************************************************** +#define I2C_MCS_BUSBSY 0x00000040 // Bus Busy +#define I2C_MCS_IDLE 0x00000020 // I2C Idle +#define I2C_MCS_ARBLST 0x00000010 // Arbitration Lost +#define I2C_MCS_ACK 0x00000008 // Data Acknowledge Enable +#define I2C_MCS_DATACK 0x00000008 // Acknowledge Data +#define I2C_MCS_ADRACK 0x00000004 // Acknowledge Address +#define I2C_MCS_STOP 0x00000004 // Generate STOP +#define I2C_MCS_START 0x00000002 // Generate START +#define I2C_MCS_ERROR 0x00000002 // Error +#define I2C_MCS_RUN 0x00000001 // I2C Master Enable +#define I2C_MCS_BUSY 0x00000001 // I2C Busy + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_SDR register. +// +//***************************************************************************** +#define I2C_SDR_DATA_M 0x000000FF // Data for Transfer +#define I2C_SDR_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MDR register. +// +//***************************************************************************** +#define I2C_MDR_DATA_M 0x000000FF // Data Transferred +#define I2C_MDR_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MTPR register. +// +//***************************************************************************** +#define I2C_MTPR_TPR_M 0x0000007F // SCL Clock Period +#define I2C_MTPR_TPR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_SIMR register. +// +//***************************************************************************** +#define I2C_SIMR_DATAIM 0x00000001 // Data Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_SRIS register. +// +//***************************************************************************** +#define I2C_SRIS_DATARIS 0x00000001 // Data Raw Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MIMR register. +// +//***************************************************************************** +#define I2C_MIMR_IM 0x00000001 // Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MRIS register. +// +//***************************************************************************** +#define I2C_MRIS_RIS 0x00000001 // Raw Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_SMIS register. +// +//***************************************************************************** +#define I2C_SMIS_DATAMIS 0x00000001 // Data Masked Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_SICR register. +// +//***************************************************************************** +#define I2C_SICR_DATAIC 0x00000001 // Data Interrupt Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MMIS register. +// +//***************************************************************************** +#define I2C_MMIS_MIS 0x00000001 // Masked Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MICR register. +// +//***************************************************************************** +#define I2C_MICR_IC 0x00000001 // Interrupt Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MCR register. +// +//***************************************************************************** +#define I2C_MCR_SFE 0x00000020 // I2C Slave Function Enable +#define I2C_MCR_MFE 0x00000010 // I2C Master Function Enable +#define I2C_MCR_LPBK 0x00000001 // I2C Loopback + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_CTL register. +// +//***************************************************************************** +#define PWM_CTL_GLOBALSYNC2 0x00000004 // Update PWM Generator 2 +#define PWM_CTL_GLOBALSYNC1 0x00000002 // Update PWM Generator 1 +#define PWM_CTL_GLOBALSYNC0 0x00000001 // Update PWM Generator 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_SYNC register. +// +//***************************************************************************** +#define PWM_SYNC_SYNC2 0x00000004 // Reset Generator 2 Counter +#define PWM_SYNC_SYNC1 0x00000002 // Reset Generator 1 Counter +#define PWM_SYNC_SYNC0 0x00000001 // Reset Generator 0 Counter + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_ENABLE register. +// +//***************************************************************************** +#define PWM_ENABLE_PWM5EN 0x00000020 // PWM5 Output Enable +#define PWM_ENABLE_PWM4EN 0x00000010 // PWM4 Output Enable +#define PWM_ENABLE_PWM3EN 0x00000008 // PWM3 Output Enable +#define PWM_ENABLE_PWM2EN 0x00000004 // PWM2 Output Enable +#define PWM_ENABLE_PWM1EN 0x00000002 // PWM1 Output Enable +#define PWM_ENABLE_PWM0EN 0x00000001 // PWM0 Output Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_INVERT register. +// +//***************************************************************************** +#define PWM_INVERT_PWM5INV 0x00000020 // Invert PWM5 Signal +#define PWM_INVERT_PWM4INV 0x00000010 // Invert PWM4 Signal +#define PWM_INVERT_PWM3INV 0x00000008 // Invert PWM3 Signal +#define PWM_INVERT_PWM2INV 0x00000004 // Invert PWM2 Signal +#define PWM_INVERT_PWM1INV 0x00000002 // Invert PWM1 Signal +#define PWM_INVERT_PWM0INV 0x00000001 // Invert PWM0 Signal + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_FAULT register. +// +//***************************************************************************** +#define PWM_FAULT_FAULT5 0x00000020 // PWM5 Fault +#define PWM_FAULT_FAULT4 0x00000010 // PWM4 Fault +#define PWM_FAULT_FAULT3 0x00000008 // PWM3 Fault +#define PWM_FAULT_FAULT2 0x00000004 // PWM2 Fault +#define PWM_FAULT_FAULT1 0x00000002 // PWM1 Fault +#define PWM_FAULT_FAULT0 0x00000001 // PWM0 Fault + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_INTEN register. +// +//***************************************************************************** +#define PWM_INTEN_INTFAULT 0x00010000 // Fault Interrupt Enable +#define PWM_INTEN_INTPWM2 0x00000004 // PWM2 Interrupt Enable +#define PWM_INTEN_INTPWM1 0x00000002 // PWM1 Interrupt Enable +#define PWM_INTEN_INTPWM0 0x00000001 // PWM0 Interrupt Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_RIS register. +// +//***************************************************************************** +#define PWM_RIS_INTFAULT 0x00010000 // Fault Interrupt Asserted +#define PWM_RIS_INTPWM2 0x00000004 // PWM2 Interrupt Asserted +#define PWM_RIS_INTPWM1 0x00000002 // PWM1 Interrupt Asserted +#define PWM_RIS_INTPWM0 0x00000001 // PWM0 Interrupt Asserted + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_ISC register. +// +//***************************************************************************** +#define PWM_ISC_INTFAULT 0x00010000 // Fault Interrupt Asserted +#define PWM_ISC_INTPWM2 0x00000004 // PWM2 Interrupt Status +#define PWM_ISC_INTPWM1 0x00000002 // PWM1 Interrupt Status +#define PWM_ISC_INTPWM0 0x00000001 // PWM0 Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_STATUS register. +// +//***************************************************************************** +#define PWM_STATUS_FAULT 0x00000001 // Fault Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_CTL register. +// +//***************************************************************************** +#define PWM_X_CTL_CMPBUPD 0x00000020 // Comparator B Update Mode +#define PWM_X_CTL_CMPAUPD 0x00000010 // Comparator A Update Mode +#define PWM_X_CTL_LOADUPD 0x00000008 // Load Register Update Mode +#define PWM_X_CTL_DEBUG 0x00000004 // Debug Mode +#define PWM_X_CTL_MODE 0x00000002 // Counter Mode +#define PWM_X_CTL_ENABLE 0x00000001 // PWM Block Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_INTEN register. +// +//***************************************************************************** +#define PWM_X_INTEN_TRCMPBD 0x00002000 // Trigger for Counter=PWMnCMPB + // Down +#define PWM_X_INTEN_TRCMPBU 0x00001000 // Trigger for Counter=PWMnCMPB Up +#define PWM_X_INTEN_TRCMPAD 0x00000800 // Trigger for Counter=PWMnCMPA + // Down +#define PWM_X_INTEN_TRCMPAU 0x00000400 // Trigger for Counter=PWMnCMPA Up +#define PWM_X_INTEN_TRCNTLOAD 0x00000200 // Trigger for Counter=PWMnLOAD +#define PWM_X_INTEN_TRCNTZERO 0x00000100 // Trigger for Counter=0 +#define PWM_X_INTEN_INTCMPBD 0x00000020 // Interrupt for Counter=PWMnCMPB + // Down +#define PWM_X_INTEN_INTCMPBU 0x00000010 // Interrupt for Counter=PWMnCMPB + // Up +#define PWM_X_INTEN_INTCMPAD 0x00000008 // Interrupt for Counter=PWMnCMPA + // Down +#define PWM_X_INTEN_INTCMPAU 0x00000004 // Interrupt for Counter=PWMnCMPA + // Up +#define PWM_X_INTEN_INTCNTLOAD 0x00000002 // Interrupt for Counter=PWMnLOAD +#define PWM_X_INTEN_INTCNTZERO 0x00000001 // Interrupt for Counter=0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_RIS register. +// +//***************************************************************************** +#define PWM_X_RIS_INTCMPBD 0x00000020 // Comparator B Down Interrupt + // Status +#define PWM_X_RIS_INTCMPBU 0x00000010 // Comparator B Up Interrupt Status +#define PWM_X_RIS_INTCMPAD 0x00000008 // Comparator A Down Interrupt + // Status +#define PWM_X_RIS_INTCMPAU 0x00000004 // Comparator A Up Interrupt Status +#define PWM_X_RIS_INTCNTLOAD 0x00000002 // Counter=Load Interrupt Status +#define PWM_X_RIS_INTCNTZERO 0x00000001 // Counter=0 Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_ISC register. +// +//***************************************************************************** +#define PWM_X_ISC_INTCMPBD 0x00000020 // Comparator B Down Interrupt +#define PWM_X_ISC_INTCMPBU 0x00000010 // Comparator B Up Interrupt +#define PWM_X_ISC_INTCMPAD 0x00000008 // Comparator A Down Interrupt +#define PWM_X_ISC_INTCMPAU 0x00000004 // Comparator A Up Interrupt +#define PWM_X_ISC_INTCNTLOAD 0x00000002 // Counter=Load Interrupt +#define PWM_X_ISC_INTCNTZERO 0x00000001 // Counter=0 Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_LOAD register. +// +//***************************************************************************** +#define PWM_X_LOAD_M 0x0000FFFF // Counter Load Value +#define PWM_X_LOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_COUNT register. +// +//***************************************************************************** +#define PWM_X_COUNT_M 0x0000FFFF // Counter Value +#define PWM_X_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_CMPA register. +// +//***************************************************************************** +#define PWM_X_CMPA_M 0x0000FFFF // Comparator A Value +#define PWM_X_CMPA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_CMPB register. +// +//***************************************************************************** +#define PWM_X_CMPB_M 0x0000FFFF // Comparator B Value +#define PWM_X_CMPB_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_GENA register. +// +//***************************************************************************** +#define PWM_X_GENA_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down +#define PWM_X_GENA_ACTCMPBD_NONE \ + 0x00000000 // Do nothing +#define PWM_X_GENA_ACTCMPBD_INV 0x00000400 // Invert pwmA +#define PWM_X_GENA_ACTCMPBD_ZERO \ + 0x00000800 // Drive pwmA Low +#define PWM_X_GENA_ACTCMPBD_ONE 0x00000C00 // Drive pwmA High +#define PWM_X_GENA_ACTCMPBU_M 0x00000300 // Action for Comparator B Up +#define PWM_X_GENA_ACTCMPBU_NONE \ + 0x00000000 // Do nothing +#define PWM_X_GENA_ACTCMPBU_INV 0x00000100 // Invert pwmA +#define PWM_X_GENA_ACTCMPBU_ZERO \ + 0x00000200 // Drive pwmA Low +#define PWM_X_GENA_ACTCMPBU_ONE 0x00000300 // Drive pwmA High +#define PWM_X_GENA_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down +#define PWM_X_GENA_ACTCMPAD_NONE \ + 0x00000000 // Do nothing +#define PWM_X_GENA_ACTCMPAD_INV 0x00000040 // Invert pwmA +#define PWM_X_GENA_ACTCMPAD_ZERO \ + 0x00000080 // Drive pwmA Low +#define PWM_X_GENA_ACTCMPAD_ONE 0x000000C0 // Drive pwmA High +#define PWM_X_GENA_ACTCMPAU_M 0x00000030 // Action for Comparator A Up +#define PWM_X_GENA_ACTCMPAU_NONE \ + 0x00000000 // Do nothing +#define PWM_X_GENA_ACTCMPAU_INV 0x00000010 // Invert pwmA +#define PWM_X_GENA_ACTCMPAU_ZERO \ + 0x00000020 // Drive pwmA Low +#define PWM_X_GENA_ACTCMPAU_ONE 0x00000030 // Drive pwmA High +#define PWM_X_GENA_ACTLOAD_M 0x0000000C // Action for Counter=LOAD +#define PWM_X_GENA_ACTLOAD_NONE 0x00000000 // Do nothing +#define PWM_X_GENA_ACTLOAD_INV 0x00000004 // Invert pwmA +#define PWM_X_GENA_ACTLOAD_ZERO 0x00000008 // Drive pwmA Low +#define PWM_X_GENA_ACTLOAD_ONE 0x0000000C // Drive pwmA High +#define PWM_X_GENA_ACTZERO_M 0x00000003 // Action for Counter=0 +#define PWM_X_GENA_ACTZERO_NONE 0x00000000 // Do nothing +#define PWM_X_GENA_ACTZERO_INV 0x00000001 // Invert pwmA +#define PWM_X_GENA_ACTZERO_ZERO 0x00000002 // Drive pwmA Low +#define PWM_X_GENA_ACTZERO_ONE 0x00000003 // Drive pwmA High + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_GENB register. +// +//***************************************************************************** +#define PWM_X_GENB_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down +#define PWM_X_GENB_ACTCMPBD_NONE \ + 0x00000000 // Do nothing +#define PWM_X_GENB_ACTCMPBD_INV 0x00000400 // Invert pwmB +#define PWM_X_GENB_ACTCMPBD_ZERO \ + 0x00000800 // Drive pwmB Low +#define PWM_X_GENB_ACTCMPBD_ONE 0x00000C00 // Drive pwmB High +#define PWM_X_GENB_ACTCMPBU_M 0x00000300 // Action for Comparator B Up +#define PWM_X_GENB_ACTCMPBU_NONE \ + 0x00000000 // Do nothing +#define PWM_X_GENB_ACTCMPBU_INV 0x00000100 // Invert pwmB +#define PWM_X_GENB_ACTCMPBU_ZERO \ + 0x00000200 // Drive pwmB Low +#define PWM_X_GENB_ACTCMPBU_ONE 0x00000300 // Drive pwmB High +#define PWM_X_GENB_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down +#define PWM_X_GENB_ACTCMPAD_NONE \ + 0x00000000 // Do nothing +#define PWM_X_GENB_ACTCMPAD_INV 0x00000040 // Invert pwmB +#define PWM_X_GENB_ACTCMPAD_ZERO \ + 0x00000080 // Drive pwmB Low +#define PWM_X_GENB_ACTCMPAD_ONE 0x000000C0 // Drive pwmB High +#define PWM_X_GENB_ACTCMPAU_M 0x00000030 // Action for Comparator A Up +#define PWM_X_GENB_ACTCMPAU_NONE \ + 0x00000000 // Do nothing +#define PWM_X_GENB_ACTCMPAU_INV 0x00000010 // Invert pwmB +#define PWM_X_GENB_ACTCMPAU_ZERO \ + 0x00000020 // Drive pwmB Low +#define PWM_X_GENB_ACTCMPAU_ONE 0x00000030 // Drive pwmB High +#define PWM_X_GENB_ACTLOAD_M 0x0000000C // Action for Counter=LOAD +#define PWM_X_GENB_ACTLOAD_NONE 0x00000000 // Do nothing +#define PWM_X_GENB_ACTLOAD_INV 0x00000004 // Invert pwmB +#define PWM_X_GENB_ACTLOAD_ZERO 0x00000008 // Drive pwmB Low +#define PWM_X_GENB_ACTLOAD_ONE 0x0000000C // Drive pwmB High +#define PWM_X_GENB_ACTZERO_M 0x00000003 // Action for Counter=0 +#define PWM_X_GENB_ACTZERO_NONE 0x00000000 // Do nothing +#define PWM_X_GENB_ACTZERO_INV 0x00000001 // Invert pwmB +#define PWM_X_GENB_ACTZERO_ZERO 0x00000002 // Drive pwmB Low +#define PWM_X_GENB_ACTZERO_ONE 0x00000003 // Drive pwmB High + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_DBCTL register. +// +//***************************************************************************** +#define PWM_X_DBCTL_ENABLE 0x00000001 // Dead-Band Generator Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_DBRISE register. +// +//***************************************************************************** +#define PWM_X_DBRISE_DELAY_M 0x00000FFF // Dead-Band Rise Delay +#define PWM_X_DBRISE_DELAY_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_DBFALL register. +// +//***************************************************************************** +#define PWM_X_DBFALL_DELAY_M 0x00000FFF // Dead-Band Fall Delay +#define PWM_X_DBFALL_DELAY_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_CTL register. +// +//***************************************************************************** +#define QEI_CTL_STALLEN 0x00001000 // Stall QEI +#define QEI_CTL_INVI 0x00000800 // Invert Index Pulse +#define QEI_CTL_INVB 0x00000400 // Invert PhB +#define QEI_CTL_INVA 0x00000200 // Invert PhA +#define QEI_CTL_VELDIV_M 0x000001C0 // Predivide Velocity +#define QEI_CTL_VELDIV_1 0x00000000 // QEI clock /1 +#define QEI_CTL_VELDIV_2 0x00000040 // QEI clock /2 +#define QEI_CTL_VELDIV_4 0x00000080 // QEI clock /4 +#define QEI_CTL_VELDIV_8 0x000000C0 // QEI clock /8 +#define QEI_CTL_VELDIV_16 0x00000100 // QEI clock /16 +#define QEI_CTL_VELDIV_32 0x00000140 // QEI clock /32 +#define QEI_CTL_VELDIV_64 0x00000180 // QEI clock /64 +#define QEI_CTL_VELDIV_128 0x000001C0 // QEI clock /128 +#define QEI_CTL_VELEN 0x00000020 // Capture Velocity +#define QEI_CTL_RESMODE 0x00000010 // Reset Mode +#define QEI_CTL_CAPMODE 0x00000008 // Capture Mode +#define QEI_CTL_SIGMODE 0x00000004 // Signal Mode +#define QEI_CTL_SWAP 0x00000002 // Swap Signals +#define QEI_CTL_ENABLE 0x00000001 // Enable QEI + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_STAT register. +// +//***************************************************************************** +#define QEI_STAT_DIRECTION 0x00000002 // Direction of Rotation +#define QEI_STAT_ERROR 0x00000001 // Error Detected + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_POS register. +// +//***************************************************************************** +#define QEI_POS_M 0xFFFFFFFF // Current Position Integrator + // Value +#define QEI_POS_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_MAXPOS register. +// +//***************************************************************************** +#define QEI_MAXPOS_M 0xFFFFFFFF // Maximum Position Integrator + // Value +#define QEI_MAXPOS_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_LOAD register. +// +//***************************************************************************** +#define QEI_LOAD_M 0xFFFFFFFF // Velocity Timer Load Value +#define QEI_LOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_TIME register. +// +//***************************************************************************** +#define QEI_TIME_M 0xFFFFFFFF // Velocity Timer Current Value +#define QEI_TIME_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_COUNT register. +// +//***************************************************************************** +#define QEI_COUNT_M 0xFFFFFFFF // Velocity Pulse Count +#define QEI_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_SPEED register. +// +//***************************************************************************** +#define QEI_SPEED_M 0xFFFFFFFF // Velocity +#define QEI_SPEED_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_INTEN register. +// +//***************************************************************************** +#define QEI_INTEN_ERROR 0x00000008 // Phase Error Interrupt Enable +#define QEI_INTEN_DIR 0x00000004 // Direction Change Interrupt + // Enable +#define QEI_INTEN_TIMER 0x00000002 // Timer Expires Interrupt Enable +#define QEI_INTEN_INDEX 0x00000001 // Index Pulse Detected Interrupt + // Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_RIS register. +// +//***************************************************************************** +#define QEI_RIS_ERROR 0x00000008 // Phase Error Detected +#define QEI_RIS_DIR 0x00000004 // Direction Change Detected +#define QEI_RIS_TIMER 0x00000002 // Velocity Timer Expired +#define QEI_RIS_INDEX 0x00000001 // Index Pulse Asserted + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_ISC register. +// +//***************************************************************************** +#define QEI_ISC_ERROR 0x00000008 // Phase Error Interrupt +#define QEI_ISC_DIR 0x00000004 // Direction Change Interrupt +#define QEI_ISC_TIMER 0x00000002 // Velocity Timer Expired Interrupt +#define QEI_ISC_INDEX 0x00000001 // Index Pulse Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_CFG register. +// +//***************************************************************************** +#define TIMER_CFG_M 0x00000007 // GPTM Configuration +#define TIMER_CFG_32_BIT_TIMER 0x00000000 // 32-bit timer configuration +#define TIMER_CFG_32_BIT_RTC 0x00000001 // 32-bit real-time clock (RTC) + // counter configuration +#define TIMER_CFG_16_BIT 0x00000004 // 16-bit timer configuration. The + // function is controlled by bits + // 1:0 of GPTMTAMR and GPTMTBMR + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TAMR register. +// +//***************************************************************************** +#define TIMER_TAMR_TAAMS 0x00000008 // GPTM Timer A Alternate Mode + // Select +#define TIMER_TAMR_TACMR 0x00000004 // GPTM Timer A Capture Mode +#define TIMER_TAMR_TAMR_M 0x00000003 // GPTM Timer A Mode +#define TIMER_TAMR_TAMR_1_SHOT 0x00000001 // One-Shot Timer mode +#define TIMER_TAMR_TAMR_PERIOD 0x00000002 // Periodic Timer mode +#define TIMER_TAMR_TAMR_CAP 0x00000003 // Capture mode + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TBMR register. +// +//***************************************************************************** +#define TIMER_TBMR_TBAMS 0x00000008 // GPTM Timer B Alternate Mode + // Select +#define TIMER_TBMR_TBCMR 0x00000004 // GPTM Timer B Capture Mode +#define TIMER_TBMR_TBMR_M 0x00000003 // GPTM Timer B Mode +#define TIMER_TBMR_TBMR_1_SHOT 0x00000001 // One-Shot Timer mode +#define TIMER_TBMR_TBMR_PERIOD 0x00000002 // Periodic Timer mode +#define TIMER_TBMR_TBMR_CAP 0x00000003 // Capture mode + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_CTL register. +// +//***************************************************************************** +#define TIMER_CTL_TBPWML 0x00004000 // GPTM Timer B PWM Output Level +#define TIMER_CTL_TBOTE 0x00002000 // GPTM Timer B Output Trigger + // Enable +#define TIMER_CTL_TBEVENT_M 0x00000C00 // GPTM Timer B Event Mode +#define TIMER_CTL_TBEVENT_POS 0x00000000 // Positive edge +#define TIMER_CTL_TBEVENT_NEG 0x00000400 // Negative edge +#define TIMER_CTL_TBEVENT_BOTH 0x00000C00 // Both edges +#define TIMER_CTL_TBSTALL 0x00000200 // GPTM Timer B Stall Enable +#define TIMER_CTL_TBEN 0x00000100 // GPTM Timer B Enable +#define TIMER_CTL_TAPWML 0x00000040 // GPTM Timer A PWM Output Level +#define TIMER_CTL_TAOTE 0x00000020 // GPTM Timer A Output Trigger + // Enable +#define TIMER_CTL_RTCEN 0x00000010 // GPTM RTC Enable +#define TIMER_CTL_TAEVENT_M 0x0000000C // GPTM Timer A Event Mode +#define TIMER_CTL_TAEVENT_POS 0x00000000 // Positive edge +#define TIMER_CTL_TAEVENT_NEG 0x00000004 // Negative edge +#define TIMER_CTL_TAEVENT_BOTH 0x0000000C // Both edges +#define TIMER_CTL_TASTALL 0x00000002 // GPTM Timer A Stall Enable +#define TIMER_CTL_TAEN 0x00000001 // GPTM Timer A Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_IMR register. +// +//***************************************************************************** +#define TIMER_IMR_CBEIM 0x00000400 // GPTM Capture B Event Interrupt + // Mask +#define TIMER_IMR_CBMIM 0x00000200 // GPTM Capture B Match Interrupt + // Mask +#define TIMER_IMR_TBTOIM 0x00000100 // GPTM Timer B Time-Out Interrupt + // Mask +#define TIMER_IMR_RTCIM 0x00000008 // GPTM RTC Interrupt Mask +#define TIMER_IMR_CAEIM 0x00000004 // GPTM Capture A Event Interrupt + // Mask +#define TIMER_IMR_CAMIM 0x00000002 // GPTM Capture A Match Interrupt + // Mask +#define TIMER_IMR_TATOIM 0x00000001 // GPTM Timer A Time-Out Interrupt + // Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_RIS register. +// +//***************************************************************************** +#define TIMER_RIS_CBERIS 0x00000400 // GPTM Capture B Event Raw + // Interrupt +#define TIMER_RIS_CBMRIS 0x00000200 // GPTM Capture B Match Raw + // Interrupt +#define TIMER_RIS_TBTORIS 0x00000100 // GPTM Timer B Time-Out Raw + // Interrupt +#define TIMER_RIS_RTCRIS 0x00000008 // GPTM RTC Raw Interrupt +#define TIMER_RIS_CAERIS 0x00000004 // GPTM Capture A Event Raw + // Interrupt +#define TIMER_RIS_CAMRIS 0x00000002 // GPTM Capture A Match Raw + // Interrupt +#define TIMER_RIS_TATORIS 0x00000001 // GPTM Timer A Time-Out Raw + // Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_MIS register. +// +//***************************************************************************** +#define TIMER_MIS_CBEMIS 0x00000400 // GPTM Capture B Event Masked + // Interrupt +#define TIMER_MIS_CBMMIS 0x00000200 // GPTM Capture B Match Masked + // Interrupt +#define TIMER_MIS_TBTOMIS 0x00000100 // GPTM Timer B Time-Out Masked + // Interrupt +#define TIMER_MIS_RTCMIS 0x00000008 // GPTM RTC Masked Interrupt +#define TIMER_MIS_CAEMIS 0x00000004 // GPTM Capture A Event Masked + // Interrupt +#define TIMER_MIS_CAMMIS 0x00000002 // GPTM Capture A Match Masked + // Interrupt +#define TIMER_MIS_TATOMIS 0x00000001 // GPTM Timer A Time-Out Masked + // Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_ICR register. +// +//***************************************************************************** +#define TIMER_ICR_CBECINT 0x00000400 // GPTM Capture B Event Interrupt + // Clear +#define TIMER_ICR_CBMCINT 0x00000200 // GPTM Capture B Match Interrupt + // Clear +#define TIMER_ICR_TBTOCINT 0x00000100 // GPTM Timer B Time-Out Interrupt + // Clear +#define TIMER_ICR_RTCCINT 0x00000008 // GPTM RTC Interrupt Clear +#define TIMER_ICR_CAECINT 0x00000004 // GPTM Capture A Event Interrupt + // Clear +#define TIMER_ICR_CAMCINT 0x00000002 // GPTM Capture A Match Interrupt + // Clear +#define TIMER_ICR_TATOCINT 0x00000001 // GPTM Timer A Time-Out Raw + // Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TAILR register. +// +//***************************************************************************** +#define TIMER_TAILR_TAILRH_M 0xFFFF0000 // GPTM Timer A Interval Load + // Register High +#define TIMER_TAILR_TAILRL_M 0x0000FFFF // GPTM Timer A Interval Load + // Register Low +#define TIMER_TAILR_TAILRH_S 16 +#define TIMER_TAILR_TAILRL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TBILR register. +// +//***************************************************************************** +#define TIMER_TBILR_TBILRL_M 0x0000FFFF // GPTM Timer B Interval Load + // Register +#define TIMER_TBILR_TBILRL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TAMATCHR +// register. +// +//***************************************************************************** +#define TIMER_TAMATCHR_TAMRH_M 0xFFFF0000 // GPTM Timer A Match Register High +#define TIMER_TAMATCHR_TAMRL_M 0x0000FFFF // GPTM Timer A Match Register Low +#define TIMER_TAMATCHR_TAMRH_S 16 +#define TIMER_TAMATCHR_TAMRL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TBMATCHR +// register. +// +//***************************************************************************** +#define TIMER_TBMATCHR_TBMRL_M 0x0000FFFF // GPTM Timer B Match Register Low +#define TIMER_TBMATCHR_TBMRL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TAPR register. +// +//***************************************************************************** +#define TIMER_TAPR_TAPSR_M 0x000000FF // GPTM Timer A Prescale +#define TIMER_TAPR_TAPSR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TBPR register. +// +//***************************************************************************** +#define TIMER_TBPR_TBPSR_M 0x000000FF // GPTM Timer B Prescale +#define TIMER_TBPR_TBPSR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TAPMR register. +// +//***************************************************************************** +#define TIMER_TAPMR_TAPSMR_M 0x000000FF // GPTM TimerA Prescale Match +#define TIMER_TAPMR_TAPSMR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TBPMR register. +// +//***************************************************************************** +#define TIMER_TBPMR_TBPSMR_M 0x000000FF // GPTM TimerB Prescale Match +#define TIMER_TBPMR_TBPSMR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TAR register. +// +//***************************************************************************** +#define TIMER_TAR_TARH_M 0xFFFF0000 // GPTM Timer A Register High +#define TIMER_TAR_TARL_M 0x0000FFFF // GPTM Timer A Register Low +#define TIMER_TAR_TARH_S 16 +#define TIMER_TAR_TARL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TBR register. +// +//***************************************************************************** +#define TIMER_TBR_TBRL_M 0x0000FFFF // GPTM Timer B +#define TIMER_TBR_TBRL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_ACTSS register. +// +//***************************************************************************** +#define ADC_ACTSS_ASEN3 0x00000008 // ADC SS3 Enable +#define ADC_ACTSS_ASEN2 0x00000004 // ADC SS2 Enable +#define ADC_ACTSS_ASEN1 0x00000002 // ADC SS1 Enable +#define ADC_ACTSS_ASEN0 0x00000001 // ADC SS0 Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_RIS register. +// +//***************************************************************************** +#define ADC_RIS_INR3 0x00000008 // SS3 Raw Interrupt Status +#define ADC_RIS_INR2 0x00000004 // SS2 Raw Interrupt Status +#define ADC_RIS_INR1 0x00000002 // SS1 Raw Interrupt Status +#define ADC_RIS_INR0 0x00000001 // SS0 Raw Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_IM register. +// +//***************************************************************************** +#define ADC_IM_MASK3 0x00000008 // SS3 Interrupt Mask +#define ADC_IM_MASK2 0x00000004 // SS2 Interrupt Mask +#define ADC_IM_MASK1 0x00000002 // SS1 Interrupt Mask +#define ADC_IM_MASK0 0x00000001 // SS0 Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_ISC register. +// +//***************************************************************************** +#define ADC_ISC_IN3 0x00000008 // SS3 Interrupt Status and Clear +#define ADC_ISC_IN2 0x00000004 // SS2 Interrupt Status and Clear +#define ADC_ISC_IN1 0x00000002 // SS1 Interrupt Status and Clear +#define ADC_ISC_IN0 0x00000001 // SS0 Interrupt Status and Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_OSTAT register. +// +//***************************************************************************** +#define ADC_OSTAT_OV3 0x00000008 // SS3 FIFO Overflow +#define ADC_OSTAT_OV2 0x00000004 // SS2 FIFO Overflow +#define ADC_OSTAT_OV1 0x00000002 // SS1 FIFO Overflow +#define ADC_OSTAT_OV0 0x00000001 // SS0 FIFO Overflow + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_EMUX register. +// +//***************************************************************************** +#define ADC_EMUX_EM3_M 0x0000F000 // SS3 Trigger Select +#define ADC_EMUX_EM3_PROCESSOR 0x00000000 // Processor (default) +#define ADC_EMUX_EM3_COMP0 0x00001000 // Analog Comparator 0 +#define ADC_EMUX_EM3_EXTERNAL 0x00004000 // External (GPIO PB4) +#define ADC_EMUX_EM3_TIMER 0x00005000 // Timer +#define ADC_EMUX_EM3_PWM0 0x00006000 // PWM0 +#define ADC_EMUX_EM3_PWM1 0x00007000 // PWM1 +#define ADC_EMUX_EM3_PWM2 0x00008000 // PWM2 +#define ADC_EMUX_EM3_ALWAYS 0x0000F000 // Always (continuously sample) +#define ADC_EMUX_EM2_M 0x00000F00 // SS2 Trigger Select +#define ADC_EMUX_EM2_PROCESSOR 0x00000000 // Processor (default) +#define ADC_EMUX_EM2_COMP0 0x00000100 // Analog Comparator 0 +#define ADC_EMUX_EM2_EXTERNAL 0x00000400 // External (GPIO PB4) +#define ADC_EMUX_EM2_TIMER 0x00000500 // Timer +#define ADC_EMUX_EM2_PWM0 0x00000600 // PWM0 +#define ADC_EMUX_EM2_PWM1 0x00000700 // PWM1 +#define ADC_EMUX_EM2_PWM2 0x00000800 // PWM2 +#define ADC_EMUX_EM2_ALWAYS 0x00000F00 // Always (continuously sample) +#define ADC_EMUX_EM1_M 0x000000F0 // SS1 Trigger Select +#define ADC_EMUX_EM1_PROCESSOR 0x00000000 // Processor (default) +#define ADC_EMUX_EM1_COMP0 0x00000010 // Analog Comparator 0 +#define ADC_EMUX_EM1_EXTERNAL 0x00000040 // External (GPIO PB4) +#define ADC_EMUX_EM1_TIMER 0x00000050 // Timer +#define ADC_EMUX_EM1_PWM0 0x00000060 // PWM0 +#define ADC_EMUX_EM1_PWM1 0x00000070 // PWM1 +#define ADC_EMUX_EM1_PWM2 0x00000080 // PWM2 +#define ADC_EMUX_EM1_ALWAYS 0x000000F0 // Always (continuously sample) +#define ADC_EMUX_EM0_M 0x0000000F // SS0 Trigger Select +#define ADC_EMUX_EM0_PROCESSOR 0x00000000 // Processor (default) +#define ADC_EMUX_EM0_COMP0 0x00000001 // Analog Comparator 0 +#define ADC_EMUX_EM0_EXTERNAL 0x00000004 // External (GPIO PB4) +#define ADC_EMUX_EM0_TIMER 0x00000005 // Timer +#define ADC_EMUX_EM0_PWM0 0x00000006 // PWM0 +#define ADC_EMUX_EM0_PWM1 0x00000007 // PWM1 +#define ADC_EMUX_EM0_PWM2 0x00000008 // PWM2 +#define ADC_EMUX_EM0_ALWAYS 0x0000000F // Always (continuously sample) + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_USTAT register. +// +//***************************************************************************** +#define ADC_USTAT_UV3 0x00000008 // SS3 FIFO Underflow +#define ADC_USTAT_UV2 0x00000004 // SS2 FIFO Underflow +#define ADC_USTAT_UV1 0x00000002 // SS1 FIFO Underflow +#define ADC_USTAT_UV0 0x00000001 // SS0 FIFO Underflow + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSPRI register. +// +//***************************************************************************** +#define ADC_SSPRI_SS3_M 0x00003000 // SS3 Priority +#define ADC_SSPRI_SS3_1ST 0x00000000 // First priority +#define ADC_SSPRI_SS3_2ND 0x00001000 // Second priority +#define ADC_SSPRI_SS3_3RD 0x00002000 // Third priority +#define ADC_SSPRI_SS3_4TH 0x00003000 // Fourth priority +#define ADC_SSPRI_SS2_M 0x00000300 // SS2 Priority +#define ADC_SSPRI_SS2_1ST 0x00000000 // First priority +#define ADC_SSPRI_SS2_2ND 0x00000100 // Second priority +#define ADC_SSPRI_SS2_3RD 0x00000200 // Third priority +#define ADC_SSPRI_SS2_4TH 0x00000300 // Fourth priority +#define ADC_SSPRI_SS1_M 0x00000030 // SS1 Priority +#define ADC_SSPRI_SS1_1ST 0x00000000 // First priority +#define ADC_SSPRI_SS1_2ND 0x00000010 // Second priority +#define ADC_SSPRI_SS1_3RD 0x00000020 // Third priority +#define ADC_SSPRI_SS1_4TH 0x00000030 // Fourth priority +#define ADC_SSPRI_SS0_M 0x00000003 // SS0 Priority +#define ADC_SSPRI_SS0_1ST 0x00000000 // First priority +#define ADC_SSPRI_SS0_2ND 0x00000001 // Second priority +#define ADC_SSPRI_SS0_3RD 0x00000002 // Third priority +#define ADC_SSPRI_SS0_4TH 0x00000003 // Fourth priority + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_PSSI register. +// +//***************************************************************************** +#define ADC_PSSI_SS3 0x00000008 // SS3 Initiate +#define ADC_PSSI_SS2 0x00000004 // SS2 Initiate +#define ADC_PSSI_SS1 0x00000002 // SS1 Initiate +#define ADC_PSSI_SS0 0x00000001 // SS0 Initiate + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SAC register. +// +//***************************************************************************** +#define ADC_SAC_AVG_M 0x00000007 // Hardware Averaging Control +#define ADC_SAC_AVG_OFF 0x00000000 // No hardware oversampling +#define ADC_SAC_AVG_2X 0x00000001 // 2x hardware oversampling +#define ADC_SAC_AVG_4X 0x00000002 // 4x hardware oversampling +#define ADC_SAC_AVG_8X 0x00000003 // 8x hardware oversampling +#define ADC_SAC_AVG_16X 0x00000004 // 16x hardware oversampling +#define ADC_SAC_AVG_32X 0x00000005 // 32x hardware oversampling +#define ADC_SAC_AVG_64X 0x00000006 // 64x hardware oversampling + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSMUX0 register. +// +//***************************************************************************** +#define ADC_SSMUX0_MUX7_M 0x30000000 // 8th Sample Input Select +#define ADC_SSMUX0_MUX6_M 0x03000000 // 7th Sample Input Select +#define ADC_SSMUX0_MUX5_M 0x00300000 // 6th Sample Input Select +#define ADC_SSMUX0_MUX4_M 0x00030000 // 5th Sample Input Select +#define ADC_SSMUX0_MUX3_M 0x00003000 // 4th Sample Input Select +#define ADC_SSMUX0_MUX2_M 0x00000300 // 3rd Sample Input Select +#define ADC_SSMUX0_MUX1_M 0x00000030 // 2nd Sample Input Select +#define ADC_SSMUX0_MUX0_M 0x00000003 // 1st Sample Input Select +#define ADC_SSMUX0_MUX7_S 28 +#define ADC_SSMUX0_MUX6_S 24 +#define ADC_SSMUX0_MUX5_S 20 +#define ADC_SSMUX0_MUX4_S 16 +#define ADC_SSMUX0_MUX3_S 12 +#define ADC_SSMUX0_MUX2_S 8 +#define ADC_SSMUX0_MUX1_S 4 +#define ADC_SSMUX0_MUX0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSCTL0 register. +// +//***************************************************************************** +#define ADC_SSCTL0_TS7 0x80000000 // 8th Sample Temp Sensor Select +#define ADC_SSCTL0_IE7 0x40000000 // 8th Sample Interrupt Enable +#define ADC_SSCTL0_END7 0x20000000 // 8th Sample is End of Sequence +#define ADC_SSCTL0_D7 0x10000000 // 8th Sample Diff Input Select +#define ADC_SSCTL0_TS6 0x08000000 // 7th Sample Temp Sensor Select +#define ADC_SSCTL0_IE6 0x04000000 // 7th Sample Interrupt Enable +#define ADC_SSCTL0_END6 0x02000000 // 7th Sample is End of Sequence +#define ADC_SSCTL0_D6 0x01000000 // 7th Sample Diff Input Select +#define ADC_SSCTL0_TS5 0x00800000 // 6th Sample Temp Sensor Select +#define ADC_SSCTL0_IE5 0x00400000 // 6th Sample Interrupt Enable +#define ADC_SSCTL0_END5 0x00200000 // 6th Sample is End of Sequence +#define ADC_SSCTL0_D5 0x00100000 // 6th Sample Diff Input Select +#define ADC_SSCTL0_TS4 0x00080000 // 5th Sample Temp Sensor Select +#define ADC_SSCTL0_IE4 0x00040000 // 5th Sample Interrupt Enable +#define ADC_SSCTL0_END4 0x00020000 // 5th Sample is End of Sequence +#define ADC_SSCTL0_D4 0x00010000 // 5th Sample Diff Input Select +#define ADC_SSCTL0_TS3 0x00008000 // 4th Sample Temp Sensor Select +#define ADC_SSCTL0_IE3 0x00004000 // 4th Sample Interrupt Enable +#define ADC_SSCTL0_END3 0x00002000 // 4th Sample is End of Sequence +#define ADC_SSCTL0_D3 0x00001000 // 4th Sample Diff Input Select +#define ADC_SSCTL0_TS2 0x00000800 // 3rd Sample Temp Sensor Select +#define ADC_SSCTL0_IE2 0x00000400 // 3rd Sample Interrupt Enable +#define ADC_SSCTL0_END2 0x00000200 // 3rd Sample is End of Sequence +#define ADC_SSCTL0_D2 0x00000100 // 3rd Sample Diff Input Select +#define ADC_SSCTL0_TS1 0x00000080 // 2nd Sample Temp Sensor Select +#define ADC_SSCTL0_IE1 0x00000040 // 2nd Sample Interrupt Enable +#define ADC_SSCTL0_END1 0x00000020 // 2nd Sample is End of Sequence +#define ADC_SSCTL0_D1 0x00000010 // 2nd Sample Diff Input Select +#define ADC_SSCTL0_TS0 0x00000008 // 1st Sample Temp Sensor Select +#define ADC_SSCTL0_IE0 0x00000004 // 1st Sample Interrupt Enable +#define ADC_SSCTL0_END0 0x00000002 // 1st Sample is End of Sequence +#define ADC_SSCTL0_D0 0x00000001 // 1st Sample Diff Input Select + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSFIFO0 register. +// +//***************************************************************************** +#define ADC_SSFIFO0_DATA_M 0x000003FF // Conversion Result Data +#define ADC_SSFIFO0_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSFSTAT0 register. +// +//***************************************************************************** +#define ADC_SSFSTAT0_FULL 0x00001000 // FIFO Full +#define ADC_SSFSTAT0_EMPTY 0x00000100 // FIFO Empty +#define ADC_SSFSTAT0_HPTR_M 0x000000F0 // FIFO Head Pointer +#define ADC_SSFSTAT0_TPTR_M 0x0000000F // FIFO Tail Pointer +#define ADC_SSFSTAT0_HPTR_S 4 +#define ADC_SSFSTAT0_TPTR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSMUX1 register. +// +//***************************************************************************** +#define ADC_SSMUX1_MUX3_M 0x00003000 // 4th Sample Input Select +#define ADC_SSMUX1_MUX2_M 0x00000300 // 3rd Sample Input Select +#define ADC_SSMUX1_MUX1_M 0x00000030 // 2nd Sample Input Select +#define ADC_SSMUX1_MUX0_M 0x00000003 // 1st Sample Input Select +#define ADC_SSMUX1_MUX3_S 12 +#define ADC_SSMUX1_MUX2_S 8 +#define ADC_SSMUX1_MUX1_S 4 +#define ADC_SSMUX1_MUX0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSCTL1 register. +// +//***************************************************************************** +#define ADC_SSCTL1_TS3 0x00008000 // 4th Sample Temp Sensor Select +#define ADC_SSCTL1_IE3 0x00004000 // 4th Sample Interrupt Enable +#define ADC_SSCTL1_END3 0x00002000 // 4th Sample is End of Sequence +#define ADC_SSCTL1_D3 0x00001000 // 4th Sample Diff Input Select +#define ADC_SSCTL1_TS2 0x00000800 // 3rd Sample Temp Sensor Select +#define ADC_SSCTL1_IE2 0x00000400 // 3rd Sample Interrupt Enable +#define ADC_SSCTL1_END2 0x00000200 // 3rd Sample is End of Sequence +#define ADC_SSCTL1_D2 0x00000100 // 3rd Sample Diff Input Select +#define ADC_SSCTL1_TS1 0x00000080 // 2nd Sample Temp Sensor Select +#define ADC_SSCTL1_IE1 0x00000040 // 2nd Sample Interrupt Enable +#define ADC_SSCTL1_END1 0x00000020 // 2nd Sample is End of Sequence +#define ADC_SSCTL1_D1 0x00000010 // 2nd Sample Diff Input Select +#define ADC_SSCTL1_TS0 0x00000008 // 1st Sample Temp Sensor Select +#define ADC_SSCTL1_IE0 0x00000004 // 1st Sample Interrupt Enable +#define ADC_SSCTL1_END0 0x00000002 // 1st Sample is End of Sequence +#define ADC_SSCTL1_D0 0x00000001 // 1st Sample Diff Input Select + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSFIFO1 register. +// +//***************************************************************************** +#define ADC_SSFIFO1_DATA_M 0x000003FF // Conversion Result Data +#define ADC_SSFIFO1_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSFSTAT1 register. +// +//***************************************************************************** +#define ADC_SSFSTAT1_FULL 0x00001000 // FIFO Full +#define ADC_SSFSTAT1_EMPTY 0x00000100 // FIFO Empty +#define ADC_SSFSTAT1_HPTR_M 0x000000F0 // FIFO Head Pointer +#define ADC_SSFSTAT1_TPTR_M 0x0000000F // FIFO Tail Pointer +#define ADC_SSFSTAT1_HPTR_S 4 +#define ADC_SSFSTAT1_TPTR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSMUX2 register. +// +//***************************************************************************** +#define ADC_SSMUX2_MUX3_M 0x00003000 // 4th Sample Input Select +#define ADC_SSMUX2_MUX2_M 0x00000300 // 3rd Sample Input Select +#define ADC_SSMUX2_MUX1_M 0x00000030 // 2nd Sample Input Select +#define ADC_SSMUX2_MUX0_M 0x00000003 // 1st Sample Input Select +#define ADC_SSMUX2_MUX3_S 12 +#define ADC_SSMUX2_MUX2_S 8 +#define ADC_SSMUX2_MUX1_S 4 +#define ADC_SSMUX2_MUX0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSCTL2 register. +// +//***************************************************************************** +#define ADC_SSCTL2_TS3 0x00008000 // 4th Sample Temp Sensor Select +#define ADC_SSCTL2_IE3 0x00004000 // 4th Sample Interrupt Enable +#define ADC_SSCTL2_END3 0x00002000 // 4th Sample is End of Sequence +#define ADC_SSCTL2_D3 0x00001000 // 4th Sample Diff Input Select +#define ADC_SSCTL2_TS2 0x00000800 // 3rd Sample Temp Sensor Select +#define ADC_SSCTL2_IE2 0x00000400 // 3rd Sample Interrupt Enable +#define ADC_SSCTL2_END2 0x00000200 // 3rd Sample is End of Sequence +#define ADC_SSCTL2_D2 0x00000100 // 3rd Sample Diff Input Select +#define ADC_SSCTL2_TS1 0x00000080 // 2nd Sample Temp Sensor Select +#define ADC_SSCTL2_IE1 0x00000040 // 2nd Sample Interrupt Enable +#define ADC_SSCTL2_END1 0x00000020 // 2nd Sample is End of Sequence +#define ADC_SSCTL2_D1 0x00000010 // 2nd Sample Diff Input Select +#define ADC_SSCTL2_TS0 0x00000008 // 1st Sample Temp Sensor Select +#define ADC_SSCTL2_IE0 0x00000004 // 1st Sample Interrupt Enable +#define ADC_SSCTL2_END0 0x00000002 // 1st Sample is End of Sequence +#define ADC_SSCTL2_D0 0x00000001 // 1st Sample Diff Input Select + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSFIFO2 register. +// +//***************************************************************************** +#define ADC_SSFIFO2_DATA_M 0x000003FF // Conversion Result Data +#define ADC_SSFIFO2_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSFSTAT2 register. +// +//***************************************************************************** +#define ADC_SSFSTAT2_FULL 0x00001000 // FIFO Full +#define ADC_SSFSTAT2_EMPTY 0x00000100 // FIFO Empty +#define ADC_SSFSTAT2_HPTR_M 0x000000F0 // FIFO Head Pointer +#define ADC_SSFSTAT2_TPTR_M 0x0000000F // FIFO Tail Pointer +#define ADC_SSFSTAT2_HPTR_S 4 +#define ADC_SSFSTAT2_TPTR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSMUX3 register. +// +//***************************************************************************** +#define ADC_SSMUX3_MUX0_M 0x00000003 // 1st Sample Input Select +#define ADC_SSMUX3_MUX0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSCTL3 register. +// +//***************************************************************************** +#define ADC_SSCTL3_TS0 0x00000008 // 1st Sample Temp Sensor Select +#define ADC_SSCTL3_IE0 0x00000004 // 1st Sample Interrupt Enable +#define ADC_SSCTL3_END0 0x00000002 // 1st Sample is End of Sequence +#define ADC_SSCTL3_D0 0x00000001 // 1st Sample Diff Input Select + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSFIFO3 register. +// +//***************************************************************************** +#define ADC_SSFIFO3_DATA_M 0x000003FF // Conversion Result Data +#define ADC_SSFIFO3_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSFSTAT3 register. +// +//***************************************************************************** +#define ADC_SSFSTAT3_FULL 0x00001000 // FIFO Full +#define ADC_SSFSTAT3_EMPTY 0x00000100 // FIFO Empty +#define ADC_SSFSTAT3_HPTR_M 0x000000F0 // FIFO Head Pointer +#define ADC_SSFSTAT3_TPTR_M 0x0000000F // FIFO Tail Pointer +#define ADC_SSFSTAT3_HPTR_S 4 +#define ADC_SSFSTAT3_TPTR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_TMLB register. +// +//***************************************************************************** +#define ADC_TMLB_LB 0x00000001 // Loopback Mode Enable + +//***************************************************************************** +// +// The following are defines for the the interpretation of the data in the +// SSFIFOx when the ADC TMLB is enabled. +// +//***************************************************************************** +#define ADC_SSFIFO_TMLB_CNT_M 0x000003C0 // Continuous Sample Counter +#define ADC_SSFIFO_TMLB_CONT 0x00000020 // Continuation Sample Indicator +#define ADC_SSFIFO_TMLB_DIFF 0x00000010 // Differential Sample Indicator +#define ADC_SSFIFO_TMLB_TS 0x00000008 // Temp Sensor Sample Indicator +#define ADC_SSFIFO_TMLB_MUX_M 0x00000007 // Analog Input Indicator +#define ADC_SSFIFO_TMLB_CNT_S 6 // Sample counter shift +#define ADC_SSFIFO_TMLB_MUX_S 0 // Input channel number shift + +//***************************************************************************** +// +// The following are defines for the bit fields in the COMP_O_ACMIS register. +// +//***************************************************************************** +#define COMP_ACMIS_IN0 0x00000001 // Comparator 0 Masked Interrupt + // Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the COMP_O_ACRIS register. +// +//***************************************************************************** +#define COMP_ACRIS_IN0 0x00000001 // Comparator 0 Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the COMP_O_ACINTEN register. +// +//***************************************************************************** +#define COMP_ACINTEN_IN0 0x00000001 // Comparator 0 Interrupt Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the COMP_O_ACREFCTL +// register. +// +//***************************************************************************** +#define COMP_ACREFCTL_EN 0x00000200 // Resistor Ladder Enable +#define COMP_ACREFCTL_RNG 0x00000100 // Resistor Ladder Range +#define COMP_ACREFCTL_VREF_M 0x0000000F // Resistor Ladder Voltage Ref +#define COMP_ACREFCTL_VREF_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the COMP_O_ACSTAT0 register. +// +//***************************************************************************** +#define COMP_ACSTAT0_OVAL 0x00000002 // Comparator Output Value + +//***************************************************************************** +// +// The following are defines for the bit fields in the COMP_O_ACCTL0 register. +// +//***************************************************************************** +#define COMP_ACCTL0_TOEN 0x00000800 // Trigger Output Enable +#define COMP_ACCTL0_ASRCP_M 0x00000600 // Analog Source Positive +#define COMP_ACCTL0_ASRCP_PIN 0x00000000 // Pin value of Cn+ +#define COMP_ACCTL0_ASRCP_PIN0 0x00000200 // Pin value of C0+ +#define COMP_ACCTL0_ASRCP_REF 0x00000400 // Internal voltage reference + // (VIREF) +#define COMP_ACCTL0_TSLVAL 0x00000080 // Trigger Sense Level Value +#define COMP_ACCTL0_TSEN_M 0x00000060 // Trigger Sense +#define COMP_ACCTL0_TSEN_LEVEL 0x00000000 // Level sense, see TSLVAL +#define COMP_ACCTL0_TSEN_FALL 0x00000020 // Falling edge +#define COMP_ACCTL0_TSEN_RISE 0x00000040 // Rising edge +#define COMP_ACCTL0_TSEN_BOTH 0x00000060 // Either edge +#define COMP_ACCTL0_ISLVAL 0x00000010 // Interrupt Sense Level Value +#define COMP_ACCTL0_ISEN_M 0x0000000C // Interrupt Sense +#define COMP_ACCTL0_ISEN_LEVEL 0x00000000 // Level sense, see ISLVAL +#define COMP_ACCTL0_ISEN_FALL 0x00000004 // Falling edge +#define COMP_ACCTL0_ISEN_RISE 0x00000008 // Rising edge +#define COMP_ACCTL0_ISEN_BOTH 0x0000000C // Either edge +#define COMP_ACCTL0_CINV 0x00000002 // Comparator Output Invert + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_CTL register. +// +//***************************************************************************** +#define CAN_CTL_TEST 0x00000080 // Test Mode Enable +#define CAN_CTL_CCE 0x00000040 // Configuration Change Enable +#define CAN_CTL_DAR 0x00000020 // Disable Automatic-Retransmission +#define CAN_CTL_EIE 0x00000008 // Error Interrupt Enable +#define CAN_CTL_SIE 0x00000004 // Status Interrupt Enable +#define CAN_CTL_IE 0x00000002 // CAN Interrupt Enable +#define CAN_CTL_INIT 0x00000001 // Initialization + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_STS register. +// +//***************************************************************************** +#define CAN_STS_BOFF 0x00000080 // Bus-Off Status +#define CAN_STS_EWARN 0x00000040 // Warning Status +#define CAN_STS_EPASS 0x00000020 // Error Passive +#define CAN_STS_RXOK 0x00000010 // Received a Message Successfully +#define CAN_STS_TXOK 0x00000008 // Transmitted a Message + // Successfully +#define CAN_STS_LEC_M 0x00000007 // Last Error Code +#define CAN_STS_LEC_NONE 0x00000000 // No Error +#define CAN_STS_LEC_STUFF 0x00000001 // Stuff Error +#define CAN_STS_LEC_FORM 0x00000002 // Format Error +#define CAN_STS_LEC_ACK 0x00000003 // ACK Error +#define CAN_STS_LEC_BIT1 0x00000004 // Bit 1 Error +#define CAN_STS_LEC_BIT0 0x00000005 // Bit 0 Error +#define CAN_STS_LEC_CRC 0x00000006 // CRC Error +#define CAN_STS_LEC_NOEVENT 0x00000007 // No Event + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_ERR register. +// +//***************************************************************************** +#define CAN_ERR_RP 0x00008000 // Received Error Passive +#define CAN_ERR_REC_M 0x00007F00 // Receive Error Counter +#define CAN_ERR_TEC_M 0x000000FF // Transmit Error Counter +#define CAN_ERR_REC_S 8 +#define CAN_ERR_TEC_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_BIT register. +// +//***************************************************************************** +#define CAN_BIT_TSEG2_M 0x00007000 // Time Segment after Sample Point +#define CAN_BIT_TSEG1_M 0x00000F00 // Time Segment Before Sample Point +#define CAN_BIT_SJW_M 0x000000C0 // (Re)Synchronization Jump Width +#define CAN_BIT_BRP_M 0x0000003F // Baud Rate Prescaler +#define CAN_BIT_TSEG2_S 12 +#define CAN_BIT_TSEG1_S 8 +#define CAN_BIT_SJW_S 6 +#define CAN_BIT_BRP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_INT register. +// +//***************************************************************************** +#define CAN_INT_INTID_M 0x0000FFFF // Interrupt Identifier +#define CAN_INT_INTID_NONE 0x00000000 // No interrupt pending +#define CAN_INT_INTID_STATUS 0x00008000 // Status Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_TST register. +// +//***************************************************************************** +#define CAN_TST_RX 0x00000080 // Receive Observation +#define CAN_TST_TX_M 0x00000060 // Transmit Control +#define CAN_TST_TX_CANCTL 0x00000000 // CAN Module Control +#define CAN_TST_TX_SAMPLE 0x00000020 // Sample Point +#define CAN_TST_TX_DOMINANT 0x00000040 // Driven Low +#define CAN_TST_TX_RECESSIVE 0x00000060 // Driven High +#define CAN_TST_LBACK 0x00000010 // Loopback Mode +#define CAN_TST_SILENT 0x00000008 // Silent Mode +#define CAN_TST_BASIC 0x00000004 // Basic Mode + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_BRPE register. +// +//***************************************************************************** +#define CAN_BRPE_BRPE_M 0x0000000F // Baud Rate Prescaler Extension +#define CAN_BRPE_BRPE_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1CRQ register. +// +//***************************************************************************** +#define CAN_IF1CRQ_BUSY 0x00008000 // Busy Flag +#define CAN_IF1CRQ_MNUM_M 0x0000003F // Message Number +#define CAN_IF1CRQ_MNUM_RSVD 0x00000000 // 0 is not a valid message number; + // it is interpreted as 0x20, or + // object 32 +#define CAN_IF1CRQ_MNUM_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1CMSK register. +// +//***************************************************************************** +#define CAN_IF1CMSK_WRNRD 0x00000080 // Write, Not Read +#define CAN_IF1CMSK_MASK 0x00000040 // Access Mask Bits +#define CAN_IF1CMSK_ARB 0x00000020 // Access Arbitration Bits +#define CAN_IF1CMSK_CONTROL 0x00000010 // Access Control Bits +#define CAN_IF1CMSK_CLRINTPND 0x00000008 // Clear Interrupt Pending Bit +#define CAN_IF1CMSK_NEWDAT 0x00000004 // Access New Data +#define CAN_IF1CMSK_TXRQST 0x00000004 // Access Transmission Request +#define CAN_IF1CMSK_DATAA 0x00000002 // Access Data Byte 0 to 3 +#define CAN_IF1CMSK_DATAB 0x00000001 // Access Data Byte 4 to 7 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1MSK1 register. +// +//***************************************************************************** +#define CAN_IF1MSK1_IDMSK_M 0x0000FFFF // Identifier Mask +#define CAN_IF1MSK1_IDMSK_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1MSK2 register. +// +//***************************************************************************** +#define CAN_IF1MSK2_MXTD 0x00008000 // Mask Extended Identifier +#define CAN_IF1MSK2_MDIR 0x00004000 // Mask Message Direction +#define CAN_IF1MSK2_IDMSK_M 0x00001FFF // Identifier Mask +#define CAN_IF1MSK2_IDMSK_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1ARB1 register. +// +//***************************************************************************** +#define CAN_IF1ARB1_ID_M 0x0000FFFF // Message Identifier +#define CAN_IF1ARB1_ID_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1ARB2 register. +// +//***************************************************************************** +#define CAN_IF1ARB2_MSGVAL 0x00008000 // Message Valid +#define CAN_IF1ARB2_XTD 0x00004000 // Extended Identifier +#define CAN_IF1ARB2_DIR 0x00002000 // Message Direction +#define CAN_IF1ARB2_ID_M 0x00001FFF // Message Identifier +#define CAN_IF1ARB2_ID_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1MCTL register. +// +//***************************************************************************** +#define CAN_IF1MCTL_NEWDAT 0x00008000 // New Data +#define CAN_IF1MCTL_MSGLST 0x00004000 // Message Lost +#define CAN_IF1MCTL_INTPND 0x00002000 // Interrupt Pending +#define CAN_IF1MCTL_UMASK 0x00001000 // Use Acceptance Mask +#define CAN_IF1MCTL_TXIE 0x00000800 // Transmit Interrupt Enable +#define CAN_IF1MCTL_RXIE 0x00000400 // Receive Interrupt Enable +#define CAN_IF1MCTL_RMTEN 0x00000200 // Remote Enable +#define CAN_IF1MCTL_TXRQST 0x00000100 // Transmit Request +#define CAN_IF1MCTL_EOB 0x00000080 // End of Buffer +#define CAN_IF1MCTL_DLC_M 0x0000000F // Data Length Code +#define CAN_IF1MCTL_DLC_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1DA1 register. +// +//***************************************************************************** +#define CAN_IF1DA1_DATA_M 0x0000FFFF // Data +#define CAN_IF1DA1_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1DA2 register. +// +//***************************************************************************** +#define CAN_IF1DA2_DATA_M 0x0000FFFF // Data +#define CAN_IF1DA2_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1DB1 register. +// +//***************************************************************************** +#define CAN_IF1DB1_DATA_M 0x0000FFFF // Data +#define CAN_IF1DB1_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1DB2 register. +// +//***************************************************************************** +#define CAN_IF1DB2_DATA_M 0x0000FFFF // Data +#define CAN_IF1DB2_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2CRQ register. +// +//***************************************************************************** +#define CAN_IF2CRQ_BUSY 0x00008000 // Busy Flag +#define CAN_IF2CRQ_MNUM_M 0x0000003F // Message Number +#define CAN_IF2CRQ_MNUM_RSVD 0x00000000 // 0 is not a valid message number; + // it is interpreted as 0x20, or + // object 32 +#define CAN_IF2CRQ_MNUM_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2CMSK register. +// +//***************************************************************************** +#define CAN_IF2CMSK_WRNRD 0x00000080 // Write, Not Read +#define CAN_IF2CMSK_MASK 0x00000040 // Access Mask Bits +#define CAN_IF2CMSK_ARB 0x00000020 // Access Arbitration Bits +#define CAN_IF2CMSK_CONTROL 0x00000010 // Access Control Bits +#define CAN_IF2CMSK_CLRINTPND 0x00000008 // Clear Interrupt Pending Bit +#define CAN_IF2CMSK_NEWDAT 0x00000004 // Access New Data +#define CAN_IF2CMSK_TXRQST 0x00000004 // Access Transmission Request +#define CAN_IF2CMSK_DATAA 0x00000002 // Access Data Byte 0 to 3 +#define CAN_IF2CMSK_DATAB 0x00000001 // Access Data Byte 4 to 7 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2MSK1 register. +// +//***************************************************************************** +#define CAN_IF2MSK1_IDMSK_M 0x0000FFFF // Identifier Mask +#define CAN_IF2MSK1_IDMSK_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2MSK2 register. +// +//***************************************************************************** +#define CAN_IF2MSK2_MXTD 0x00008000 // Mask Extended Identifier +#define CAN_IF2MSK2_MDIR 0x00004000 // Mask Message Direction +#define CAN_IF2MSK2_IDMSK_M 0x00001FFF // Identifier Mask +#define CAN_IF2MSK2_IDMSK_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2ARB1 register. +// +//***************************************************************************** +#define CAN_IF2ARB1_ID_M 0x0000FFFF // Message Identifier +#define CAN_IF2ARB1_ID_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2ARB2 register. +// +//***************************************************************************** +#define CAN_IF2ARB2_MSGVAL 0x00008000 // Message Valid +#define CAN_IF2ARB2_XTD 0x00004000 // Extended Identifier +#define CAN_IF2ARB2_DIR 0x00002000 // Message Direction +#define CAN_IF2ARB2_ID_M 0x00001FFF // Message Identifier +#define CAN_IF2ARB2_ID_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2MCTL register. +// +//***************************************************************************** +#define CAN_IF2MCTL_NEWDAT 0x00008000 // New Data +#define CAN_IF2MCTL_MSGLST 0x00004000 // Message Lost +#define CAN_IF2MCTL_INTPND 0x00002000 // Interrupt Pending +#define CAN_IF2MCTL_UMASK 0x00001000 // Use Acceptance Mask +#define CAN_IF2MCTL_TXIE 0x00000800 // Transmit Interrupt Enable +#define CAN_IF2MCTL_RXIE 0x00000400 // Receive Interrupt Enable +#define CAN_IF2MCTL_RMTEN 0x00000200 // Remote Enable +#define CAN_IF2MCTL_TXRQST 0x00000100 // Transmit Request +#define CAN_IF2MCTL_EOB 0x00000080 // End of Buffer +#define CAN_IF2MCTL_DLC_M 0x0000000F // Data Length Code +#define CAN_IF2MCTL_DLC_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2DA1 register. +// +//***************************************************************************** +#define CAN_IF2DA1_DATA_M 0x0000FFFF // Data +#define CAN_IF2DA1_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2DA2 register. +// +//***************************************************************************** +#define CAN_IF2DA2_DATA_M 0x0000FFFF // Data +#define CAN_IF2DA2_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2DB1 register. +// +//***************************************************************************** +#define CAN_IF2DB1_DATA_M 0x0000FFFF // Data +#define CAN_IF2DB1_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2DB2 register. +// +//***************************************************************************** +#define CAN_IF2DB2_DATA_M 0x0000FFFF // Data +#define CAN_IF2DB2_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_TXRQ1 register. +// +//***************************************************************************** +#define CAN_TXRQ1_TXRQST_M 0x0000FFFF // Transmission Request Bits +#define CAN_TXRQ1_TXRQST_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_TXRQ2 register. +// +//***************************************************************************** +#define CAN_TXRQ2_TXRQST_M 0x0000FFFF // Transmission Request Bits +#define CAN_TXRQ2_TXRQST_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_NWDA1 register. +// +//***************************************************************************** +#define CAN_NWDA1_NEWDAT_M 0x0000FFFF // New Data Bits +#define CAN_NWDA1_NEWDAT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_NWDA2 register. +// +//***************************************************************************** +#define CAN_NWDA2_NEWDAT_M 0x0000FFFF // New Data Bits +#define CAN_NWDA2_NEWDAT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_MSG1INT register. +// +//***************************************************************************** +#define CAN_MSG1INT_INTPND_M 0x0000FFFF // Interrupt Pending Bits +#define CAN_MSG1INT_INTPND_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_MSG2INT register. +// +//***************************************************************************** +#define CAN_MSG2INT_INTPND_M 0x0000FFFF // Interrupt Pending Bits +#define CAN_MSG2INT_INTPND_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_MSG1VAL register. +// +//***************************************************************************** +#define CAN_MSG1VAL_MSGVAL_M 0x0000FFFF // Message Valid Bits +#define CAN_MSG1VAL_MSGVAL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_MSG2VAL register. +// +//***************************************************************************** +#define CAN_MSG2VAL_MSGVAL_M 0x0000FFFF // Message Valid Bits +#define CAN_MSG2VAL_MSGVAL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the MAC_O_RIS register. +// +//***************************************************************************** +#define MAC_RIS_PHYINT 0x00000040 // PHY Interrupt +#define MAC_RIS_MDINT 0x00000020 // MII Transaction Complete +#define MAC_RIS_RXER 0x00000010 // Receive Error +#define MAC_RIS_FOV 0x00000008 // FIFO Overrun +#define MAC_RIS_TXEMP 0x00000004 // Transmit FIFO Empty +#define MAC_RIS_TXER 0x00000002 // Transmit Error +#define MAC_RIS_RXINT 0x00000001 // Packet Received + +//***************************************************************************** +// +// The following are defines for the bit fields in the MAC_O_IACK register. +// +//***************************************************************************** +#define MAC_IACK_PHYINT 0x00000040 // Clear PHY Interrupt +#define MAC_IACK_MDINT 0x00000020 // Clear MII Transaction Complete +#define MAC_IACK_RXER 0x00000010 // Clear Receive Error +#define MAC_IACK_FOV 0x00000008 // Clear FIFO Overrun +#define MAC_IACK_TXEMP 0x00000004 // Clear Transmit FIFO Empty +#define MAC_IACK_TXER 0x00000002 // Clear Transmit Error +#define MAC_IACK_RXINT 0x00000001 // Clear Packet Received + +//***************************************************************************** +// +// The following are defines for the bit fields in the MAC_O_IM register. +// +//***************************************************************************** +#define MAC_IM_PHYINTM 0x00000040 // Mask PHY Interrupt +#define MAC_IM_MDINTM 0x00000020 // Mask MII Transaction Complete +#define MAC_IM_RXERM 0x00000010 // Mask Receive Error +#define MAC_IM_FOVM 0x00000008 // Mask FIFO Overrun +#define MAC_IM_TXEMPM 0x00000004 // Mask Transmit FIFO Empty +#define MAC_IM_TXERM 0x00000002 // Mask Transmit Error +#define MAC_IM_RXINTM 0x00000001 // Mask Packet Received + +//***************************************************************************** +// +// The following are defines for the bit fields in the MAC_O_RCTL register. +// +//***************************************************************************** +#define MAC_RCTL_RSTFIFO 0x00000010 // Clear Receive FIFO +#define MAC_RCTL_BADCRC 0x00000008 // Enable Reject Bad CRC +#define MAC_RCTL_PRMS 0x00000004 // Enable Promiscuous Mode +#define MAC_RCTL_AMUL 0x00000002 // Enable Multicast Frames +#define MAC_RCTL_RXEN 0x00000001 // Enable Receiver + +//***************************************************************************** +// +// The following are defines for the bit fields in the MAC_O_TCTL register. +// +//***************************************************************************** +#define MAC_TCTL_DUPLEX 0x00000010 // Enable Duplex Mode +#define MAC_TCTL_CRC 0x00000004 // Enable CRC Generation +#define MAC_TCTL_PADEN 0x00000002 // Enable Packet Padding +#define MAC_TCTL_TXEN 0x00000001 // Enable Transmitter + +//***************************************************************************** +// +// The following are defines for the bit fields in the MAC_O_DATA register. +// +//***************************************************************************** +#define MAC_DATA_TXDATA_M 0xFFFFFFFF // Transmit FIFO Data +#define MAC_DATA_RXDATA_M 0xFFFFFFFF // Receive FIFO Data +#define MAC_DATA_RXDATA_S 0 +#define MAC_DATA_TXDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the MAC_O_IA0 register. +// +//***************************************************************************** +#define MAC_IA0_MACOCT4_M 0xFF000000 // MAC Address Octet 4 +#define MAC_IA0_MACOCT3_M 0x00FF0000 // MAC Address Octet 3 +#define MAC_IA0_MACOCT2_M 0x0000FF00 // MAC Address Octet 2 +#define MAC_IA0_MACOCT1_M 0x000000FF // MAC Address Octet 1 +#define MAC_IA0_MACOCT4_S 24 +#define MAC_IA0_MACOCT3_S 16 +#define MAC_IA0_MACOCT2_S 8 +#define MAC_IA0_MACOCT1_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the MAC_O_IA1 register. +// +//***************************************************************************** +#define MAC_IA1_MACOCT6_M 0x0000FF00 // MAC Address Octet 6 +#define MAC_IA1_MACOCT5_M 0x000000FF // MAC Address Octet 5 +#define MAC_IA1_MACOCT6_S 8 +#define MAC_IA1_MACOCT5_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the MAC_O_THR register. +// +//***************************************************************************** +#define MAC_THR_THRESH_M 0x0000003F // Threshold Value +#define MAC_THR_THRESH_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the MAC_O_MCTL register. +// +//***************************************************************************** +#define MAC_MCTL_REGADR_M 0x000000F8 // MII Register Address +#define MAC_MCTL_WRITE 0x00000002 // MII Register Transaction Type +#define MAC_MCTL_START 0x00000001 // MII Register Transaction Enable +#define MAC_MCTL_REGADR_S 3 + +//***************************************************************************** +// +// The following are defines for the bit fields in the MAC_O_MDV register. +// +//***************************************************************************** +#define MAC_MDV_DIV_M 0x000000FF // Clock Divider +#define MAC_MDV_DIV_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the MAC_O_MTXD register. +// +//***************************************************************************** +#define MAC_MTXD_MDTX_M 0x0000FFFF // MII Register Transmit Data +#define MAC_MTXD_MDTX_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the MAC_O_MRXD register. +// +//***************************************************************************** +#define MAC_MRXD_MDRX_M 0x0000FFFF // MII Register Receive Data +#define MAC_MRXD_MDRX_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the MAC_O_NP register. +// +//***************************************************************************** +#define MAC_NP_NPR_M 0x0000003F // Number of Packets in Receive + // FIFO +#define MAC_NP_NPR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the MAC_O_TR register. +// +//***************************************************************************** +#define MAC_TR_NEWTX 0x00000001 // New Transmission + +//***************************************************************************** +// +// The following are defines for the bit fields in the MAC_O_TS register. +// +//***************************************************************************** +#define MAC_TS_TSEN 0x00000001 // Time Stamp Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the PHY_MR0 register. +// +//***************************************************************************** +#define PHY_MR0_RESET 0x00008000 // Reset Registers +#define PHY_MR0_LOOPBK 0x00004000 // Loopback Mode +#define PHY_MR0_SPEEDSL 0x00002000 // Speed Select +#define PHY_MR0_ANEGEN 0x00001000 // Auto-Negotiation Enable +#define PHY_MR0_PWRDN 0x00000800 // Power Down +#define PHY_MR0_ISO 0x00000400 // Isolate +#define PHY_MR0_RANEG 0x00000200 // Restart Auto-Negotiation +#define PHY_MR0_DUPLEX 0x00000100 // Set Duplex Mode +#define PHY_MR0_COLT 0x00000080 // Collision Test + +//***************************************************************************** +// +// The following are defines for the bit fields in the PHY_MR1 register. +// +//***************************************************************************** +#define PHY_MR1_100X_F 0x00004000 // 100BASE-TX Full-Duplex Mode +#define PHY_MR1_100X_H 0x00002000 // 100BASE-TX Half-Duplex Mode +#define PHY_MR1_10T_F 0x00001000 // 10BASE-T Full-Duplex Mode +#define PHY_MR1_10T_H 0x00000800 // 10BASE-T Half-Duplex Mode +#define PHY_MR1_MFPS 0x00000040 // Management Frames with Preamble + // Suppressed +#define PHY_MR1_ANEGC 0x00000020 // Auto-Negotiation Complete +#define PHY_MR1_RFAULT 0x00000010 // Remote Fault +#define PHY_MR1_ANEGA 0x00000008 // Auto-Negotiation +#define PHY_MR1_LINK 0x00000004 // Link Made +#define PHY_MR1_JAB 0x00000002 // Jabber Condition +#define PHY_MR1_EXTD 0x00000001 // Extended Capabilities + +//***************************************************************************** +// +// The following are defines for the bit fields in the PHY_MR2 register. +// +//***************************************************************************** +#define PHY_MR2_OUI_M 0x0000FFFF // Organizationally Unique + // Identifier[21:6] +#define PHY_MR2_OUI_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PHY_MR3 register. +// +//***************************************************************************** +#define PHY_MR3_OUI_M 0x0000FC00 // Organizationally Unique + // Identifier[5:0] +#define PHY_MR3_MN_M 0x000003F0 // Model Number +#define PHY_MR3_RN_M 0x0000000F // Revision Number +#define PHY_MR3_OUI_S 10 +#define PHY_MR3_MN_S 4 +#define PHY_MR3_RN_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PHY_MR4 register. +// +//***************************************************************************** +#define PHY_MR4_NP 0x00008000 // Next Page +#define PHY_MR4_RF 0x00002000 // Remote Fault +#define PHY_MR4_A3 0x00000100 // Technology Ability Field [3] +#define PHY_MR4_A2 0x00000080 // Technology Ability Field [2] +#define PHY_MR4_A1 0x00000040 // Technology Ability Field [1] +#define PHY_MR4_A0 0x00000020 // Technology Ability Field [0] +#define PHY_MR4_S_M 0x0000001F // Selector Field +#define PHY_MR4_S_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PHY_MR5 register. +// +//***************************************************************************** +#define PHY_MR5_NP 0x00008000 // Next Page +#define PHY_MR5_ACK 0x00004000 // Acknowledge +#define PHY_MR5_RF 0x00002000 // Remote Fault +#define PHY_MR5_A_M 0x00001FE0 // Technology Ability Field +#define PHY_MR5_S_M 0x0000001F // Selector Field +#define PHY_MR5_S_8023 0x00000001 // IEEE Std 802.3 +#define PHY_MR5_S_8029 0x00000002 // IEEE Std 802.9 ISLAN-16T +#define PHY_MR5_S_8025 0x00000003 // IEEE Std 802.5 +#define PHY_MR5_S_1394 0x00000004 // IEEE Std 1394 +#define PHY_MR5_A_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PHY_MR6 register. +// +//***************************************************************************** +#define PHY_MR6_PDF 0x00000010 // Parallel Detection Fault +#define PHY_MR6_LPNPA 0x00000008 // Link Partner is Next Page Able +#define PHY_MR6_PRX 0x00000002 // New Page Received +#define PHY_MR6_LPANEGA 0x00000001 // Link Partner is Auto-Negotiation + // Able + +//***************************************************************************** +// +// The following are defines for the bit fields in the PHY_MR16 register. +// +//***************************************************************************** +#define PHY_MR16_RPTR 0x00008000 // Repeater Mode +#define PHY_MR16_INPOL 0x00004000 // Interrupt Polarity +#define PHY_MR16_TXHIM 0x00001000 // Transmit High Impedance Mode +#define PHY_MR16_SQEI 0x00000800 // SQE Inhibit Testing +#define PHY_MR16_NL10 0x00000400 // Natural Loopback Mode +#define PHY_MR16_APOL 0x00000020 // Auto-Polarity Disable +#define PHY_MR16_RVSPOL 0x00000010 // Receive Data Polarity +#define PHY_MR16_PCSBP 0x00000002 // PCS Bypass +#define PHY_MR16_RXCC 0x00000001 // Receive Clock Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the PHY_MR17 register. +// +//***************************************************************************** +#define PHY_MR17_JABBER_IE 0x00008000 // Jabber Interrupt Enable +#define PHY_MR17_RXER_IE 0x00004000 // Receive Error Interrupt Enable +#define PHY_MR17_PRX_IE 0x00002000 // Page Received Interrupt Enable +#define PHY_MR17_PDF_IE 0x00001000 // Parallel Detection Fault + // Interrupt Enable +#define PHY_MR17_LPACK_IE 0x00000800 // LP Acknowledge Interrupt Enable +#define PHY_MR17_LSCHG_IE 0x00000400 // Link Status Change Interrupt + // Enable +#define PHY_MR17_RFAULT_IE 0x00000200 // Remote Fault Interrupt Enable +#define PHY_MR17_ANEGCOMP_IE 0x00000100 // Auto-Negotiation Complete + // Interrupt Enable +#define PHY_MR17_JABBER_INT 0x00000080 // Jabber Event Interrupt +#define PHY_MR17_RXER_INT 0x00000040 // Receive Error Interrupt +#define PHY_MR17_PRX_INT 0x00000020 // Page Receive Interrupt +#define PHY_MR17_PDF_INT 0x00000010 // Parallel Detection Fault + // Interrupt +#define PHY_MR17_LPACK_INT 0x00000008 // LP Acknowledge Interrupt +#define PHY_MR17_LSCHG_INT 0x00000004 // Link Status Change Interrupt +#define PHY_MR17_RFAULT_INT 0x00000002 // Remote Fault Interrupt +#define PHY_MR17_ANEGCOMP_INT 0x00000001 // Auto-Negotiation Complete + // Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the PHY_MR18 register. +// +//***************************************************************************** +#define PHY_MR18_ANEGF 0x00001000 // Auto-Negotiation Failure +#define PHY_MR18_DPLX 0x00000800 // Duplex Mode +#define PHY_MR18_RATE 0x00000400 // Rate +#define PHY_MR18_RXSD 0x00000200 // Receive Detection +#define PHY_MR18_RX_LOCK 0x00000100 // Receive PLL Lock + +//***************************************************************************** +// +// The following are defines for the bit fields in the PHY_MR19 register. +// +//***************************************************************************** +#define PHY_MR19_TXO_M 0x0000C000 // Transmit Amplitude Selection +#define PHY_MR19_TXO_00DB 0x00000000 // Gain set for 0.0dB of insertion + // loss +#define PHY_MR19_TXO_04DB 0x00004000 // Gain set for 0.4dB of insertion + // loss +#define PHY_MR19_TXO_08DB 0x00008000 // Gain set for 0.8dB of insertion + // loss +#define PHY_MR19_TXO_12DB 0x0000C000 // Gain set for 1.2dB of insertion + // loss + +//***************************************************************************** +// +// The following are defines for the bit fields in the PHY_MR23 register. +// +//***************************************************************************** +#define PHY_MR23_LED1_M 0x000000F0 // LED1 Source +#define PHY_MR23_LED1_LINK 0x00000000 // Link OK +#define PHY_MR23_LED1_RXTX 0x00000010 // RX or TX Activity (Default LED1) +#define PHY_MR23_LED1_100 0x00000050 // 100BASE-TX mode +#define PHY_MR23_LED1_10 0x00000060 // 10BASE-T mode +#define PHY_MR23_LED1_DUPLEX 0x00000070 // Full-Duplex +#define PHY_MR23_LED1_LINKACT 0x00000080 // Link OK & Blink=RX or TX + // Activity +#define PHY_MR23_LED0_M 0x0000000F // LED0 Source +#define PHY_MR23_LED0_LINK 0x00000000 // Link OK (Default LED0) +#define PHY_MR23_LED0_RXTX 0x00000001 // RX or TX Activity +#define PHY_MR23_LED0_100 0x00000005 // 100BASE-TX mode +#define PHY_MR23_LED0_10 0x00000006 // 10BASE-T mode +#define PHY_MR23_LED0_DUPLEX 0x00000007 // Full-Duplex +#define PHY_MR23_LED0_LINKACT 0x00000008 // Link OK & Blink=RX or TX + // Activity + +//***************************************************************************** +// +// The following are defines for the bit fields in the PHY_MR24 register. +// +//***************************************************************************** +#define PHY_MR24_PD_MODE 0x00000080 // Parallel Detection Mode +#define PHY_MR24_AUTO_SW 0x00000040 // Auto-Switching Enable +#define PHY_MR24_MDIX 0x00000020 // Auto-Switching Configuration +#define PHY_MR24_MDIX_CM 0x00000010 // Auto-Switching Complete +#define PHY_MR24_MDIX_SD_M 0x0000000F // Auto-Switching Seed +#define PHY_MR24_MDIX_SD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_RTCC register. +// +//***************************************************************************** +#define HIB_RTCC_M 0xFFFFFFFF // RTC Counter +#define HIB_RTCC_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_RTCM0 register. +// +//***************************************************************************** +#define HIB_RTCM0_M 0xFFFFFFFF // RTC Match 0 +#define HIB_RTCM0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_RTCM1 register. +// +//***************************************************************************** +#define HIB_RTCM1_M 0xFFFFFFFF // RTC Match 1 +#define HIB_RTCM1_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_RTCLD register. +// +//***************************************************************************** +#define HIB_RTCLD_M 0xFFFFFFFF // RTC Load +#define HIB_RTCLD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_CTL register. +// +//***************************************************************************** +#define HIB_CTL_VABORT 0x00000080 // Power Cut Abort Enable +#define HIB_CTL_CLK32EN 0x00000040 // Clocking Enable +#define HIB_CTL_LOWBATEN 0x00000020 // Low Battery Monitoring Enable +#define HIB_CTL_PINWEN 0x00000010 // External WAKE Pin Enable +#define HIB_CTL_RTCWEN 0x00000008 // RTC Wake-up Enable +#define HIB_CTL_CLKSEL 0x00000004 // Hibernation Module Clock Select +#define HIB_CTL_HIBREQ 0x00000002 // Hibernation Request +#define HIB_CTL_RTCEN 0x00000001 // RTC Timer Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_IM register. +// +//***************************************************************************** +#define HIB_IM_EXTW 0x00000008 // External Wake-Up Interrupt Mask +#define HIB_IM_LOWBAT 0x00000004 // Low Battery Voltage Interrupt + // Mask +#define HIB_IM_RTCALT1 0x00000002 // RTC Alert 1 Interrupt Mask +#define HIB_IM_RTCALT0 0x00000001 // RTC Alert 0 Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_RIS register. +// +//***************************************************************************** +#define HIB_RIS_EXTW 0x00000008 // External Wake-Up Raw Interrupt + // Status +#define HIB_RIS_LOWBAT 0x00000004 // Low Battery Voltage Raw + // Interrupt Status +#define HIB_RIS_RTCALT1 0x00000002 // RTC Alert 1 Raw Interrupt Status +#define HIB_RIS_RTCALT0 0x00000001 // RTC Alert 0 Raw Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_MIS register. +// +//***************************************************************************** +#define HIB_MIS_EXTW 0x00000008 // External Wake-Up Masked + // Interrupt Status +#define HIB_MIS_LOWBAT 0x00000004 // Low Battery Voltage Masked + // Interrupt Status +#define HIB_MIS_RTCALT1 0x00000002 // RTC Alert 1 Masked Interrupt + // Status +#define HIB_MIS_RTCALT0 0x00000001 // RTC Alert 0 Masked Interrupt + // Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_IC register. +// +//***************************************************************************** +#define HIB_IC_EXTW 0x00000008 // External Wake-Up Masked + // Interrupt Clear +#define HIB_IC_LOWBAT 0x00000004 // Low Battery Voltage Masked + // Interrupt Clear +#define HIB_IC_RTCALT1 0x00000002 // RTC Alert1 Masked Interrupt + // Clear +#define HIB_IC_RTCALT0 0x00000001 // RTC Alert0 Masked Interrupt + // Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_RTCT register. +// +//***************************************************************************** +#define HIB_RTCT_TRIM_M 0x0000FFFF // RTC Trim Value +#define HIB_RTCT_TRIM_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_DATA register. +// +//***************************************************************************** +#define HIB_DATA_RTD_M 0xFFFFFFFF // Hibernation Module NV Data +#define HIB_DATA_RTD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FMA register. +// +//***************************************************************************** +#define FLASH_FMA_OFFSET_M 0x0003FFFF // Address Offset +#define FLASH_FMA_OFFSET_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FMD register. +// +//***************************************************************************** +#define FLASH_FMD_DATA_M 0xFFFFFFFF // Data Value +#define FLASH_FMD_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FMC register. +// +//***************************************************************************** +#define FLASH_FMC_WRKEY 0xA4420000 // FLASH write key +#define FLASH_FMC_COMT 0x00000008 // Commit Register Value +#define FLASH_FMC_MERASE 0x00000004 // Mass Erase Flash Memory +#define FLASH_FMC_ERASE 0x00000002 // Erase a Page of Flash Memory +#define FLASH_FMC_WRITE 0x00000001 // Write a Word into Flash Memory + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FCRIS register. +// +//***************************************************************************** +#define FLASH_FCRIS_PRIS 0x00000002 // Programming Raw Interrupt Status +#define FLASH_FCRIS_ARIS 0x00000001 // Access Raw Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FCIM register. +// +//***************************************************************************** +#define FLASH_FCIM_PMASK 0x00000002 // Programming Interrupt Mask +#define FLASH_FCIM_AMASK 0x00000001 // Access Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FCMISC register. +// +//***************************************************************************** +#define FLASH_FCMISC_PMISC 0x00000002 // Programming Masked Interrupt + // Status and Clear +#define FLASH_FCMISC_AMISC 0x00000001 // Access Masked Interrupt Status + // and Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_USECRL register. +// +//***************************************************************************** +#define FLASH_USECRL_M 0x000000FF // Microsecond Reload Value +#define FLASH_USECRL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_USERDBG register. +// +//***************************************************************************** +#define FLASH_USERDBG_NW 0x80000000 // User Debug Not Written +#define FLASH_USERDBG_DATA_M 0x7FFFFFFC // User Data +#define FLASH_USERDBG_DBG1 0x00000002 // Debug Control 1 +#define FLASH_USERDBG_DBG0 0x00000001 // Debug Control 0 +#define FLASH_USERDBG_DATA_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_USERREG0 register. +// +//***************************************************************************** +#define FLASH_USERREG0_NW 0x80000000 // Not Written +#define FLASH_USERREG0_DATA_M 0x7FFFFFFF // User Data +#define FLASH_USERREG0_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_USERREG1 register. +// +//***************************************************************************** +#define FLASH_USERREG1_NW 0x80000000 // Not Written +#define FLASH_USERREG1_DATA_M 0x7FFFFFFF // User Data +#define FLASH_USERREG1_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the erase size of the FLASH block that is +// erased by an erase operation, and the protect size is the size of the FLASH +// block that is protected by each protection register. +// +//***************************************************************************** +#define FLASH_PROTECT_SIZE 0x00000800 +#define FLASH_ERASE_SIZE 0x00000400 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DID0 register. +// +//***************************************************************************** +#define SYSCTL_DID0_VER_M 0x70000000 // DID0 Version +#define SYSCTL_DID0_VER_1 0x10000000 // Second version of the DID0 + // register format +#define SYSCTL_DID0_CLASS_M 0x00FF0000 // Device Class +#define SYSCTL_DID0_CLASS_FURY 0x00010000 // Stellaris(R) Fury-class devices +#define SYSCTL_DID0_MAJ_M 0x0000FF00 // Major Revision +#define SYSCTL_DID0_MAJ_REVA 0x00000000 // Revision A (initial device) +#define SYSCTL_DID0_MAJ_REVB 0x00000100 // Revision B (first base layer + // revision) +#define SYSCTL_DID0_MAJ_REVC 0x00000200 // Revision C (second base layer + // revision) +#define SYSCTL_DID0_MIN_M 0x000000FF // Minor Revision +#define SYSCTL_DID0_MIN_0 0x00000000 // Initial device, or a major + // revision update +#define SYSCTL_DID0_MIN_1 0x00000001 // First metal layer change +#define SYSCTL_DID0_MIN_2 0x00000002 // Second metal layer change + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DID1 register. +// +//***************************************************************************** +#define SYSCTL_DID1_VER_M 0xF0000000 // DID1 Version +#define SYSCTL_DID1_VER_1 0x10000000 // Second version of the DID1 + // register format +#define SYSCTL_DID1_FAM_M 0x0F000000 // Family +#define SYSCTL_DID1_FAM_STELLARIS \ + 0x00000000 // Stellaris family of + // microcontollers, that is, all + // devices with external part + // numbers starting with LM3S +#define SYSCTL_DID1_PRTNO_M 0x00FF0000 // Part Number +#define SYSCTL_DID1_PRTNO_8962 0x00A60000 // LM3S8962 +#define SYSCTL_DID1_PINCNT_M 0x0000E000 // Package Pin Count +#define SYSCTL_DID1_PINCNT_100 0x00004000 // 100-pin package +#define SYSCTL_DID1_TEMP_M 0x000000E0 // Temperature Range +#define SYSCTL_DID1_TEMP_C 0x00000000 // Commercial temperature range (0C + // to 70C) +#define SYSCTL_DID1_TEMP_I 0x00000020 // Industrial temperature range + // (-40C to 85C) +#define SYSCTL_DID1_TEMP_E 0x00000040 // Extended temperature range (-40C + // to 105C) +#define SYSCTL_DID1_PKG_M 0x00000018 // Package Type +#define SYSCTL_DID1_PKG_SOIC 0x00000000 // SOIC package +#define SYSCTL_DID1_PKG_QFP 0x00000008 // LQFP package +#define SYSCTL_DID1_PKG_BGA 0x00000010 // BGA package +#define SYSCTL_DID1_ROHS 0x00000004 // RoHS-Compliance +#define SYSCTL_DID1_QUAL_M 0x00000003 // Qualification Status +#define SYSCTL_DID1_QUAL_ES 0x00000000 // Engineering Sample (unqualified) +#define SYSCTL_DID1_QUAL_PP 0x00000001 // Pilot Production (unqualified) +#define SYSCTL_DID1_QUAL_FQ 0x00000002 // Fully Qualified + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DC0 register. +// +//***************************************************************************** +#define SYSCTL_DC0_SRAMSZ_M 0xFFFF0000 // SRAM Size +#define SYSCTL_DC0_SRAMSZ_64KB 0x00FF0000 // 64 KB of SRAM +#define SYSCTL_DC0_FLASHSZ_M 0x0000FFFF // Flash Size +#define SYSCTL_DC0_FLASHSZ_256K 0x0000007F // 256 KB of Flash +#define SYSCTL_DC0_SRAMSZ_S 16 // SRAM size shift +#define SYSCTL_DC0_FLASHSZ_S 0 // Flash size shift + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DC1 register. +// +//***************************************************************************** +#define SYSCTL_DC1_CAN0 0x01000000 // CAN Module 0 Present +#define SYSCTL_DC1_PWM 0x00100000 // PWM Module Present +#define SYSCTL_DC1_ADC 0x00010000 // ADC Module Present +#define SYSCTL_DC1_MINSYSDIV_M 0x0000F000 // System Clock Divider +#define SYSCTL_DC1_MINSYSDIV_50 0x00003000 // Specifies a 50-MHz CPU clock + // with a PLL divider of 4 +#define SYSCTL_DC1_ADCSPD_M 0x00000300 // Max ADC Speed +#define SYSCTL_DC1_ADCSPD_500K 0x00000200 // 500K samples/second +#define SYSCTL_DC1_MPU 0x00000080 // MPU Present +#define SYSCTL_DC1_HIB 0x00000040 // Hibernation Module Present +#define SYSCTL_DC1_TEMP 0x00000020 // Temp Sensor Present +#define SYSCTL_DC1_PLL 0x00000010 // PLL Present +#define SYSCTL_DC1_WDT 0x00000008 // Watchdog Timer Present +#define SYSCTL_DC1_SWO 0x00000004 // SWO Trace Port Present +#define SYSCTL_DC1_SWD 0x00000002 // SWD Present +#define SYSCTL_DC1_JTAG 0x00000001 // JTAG Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DC2 register. +// +//***************************************************************************** +#define SYSCTL_DC2_COMP0 0x01000000 // Analog Comparator 0 Present +#define SYSCTL_DC2_TIMER3 0x00080000 // Timer Module 3 Present +#define SYSCTL_DC2_TIMER2 0x00040000 // Timer Module 2 Present +#define SYSCTL_DC2_TIMER1 0x00020000 // Timer Module 1 Present +#define SYSCTL_DC2_TIMER0 0x00010000 // Timer Module 0 Present +#define SYSCTL_DC2_I2C0 0x00001000 // I2C Module 0 Present +#define SYSCTL_DC2_QEI1 0x00000200 // QEI Module 1 Present +#define SYSCTL_DC2_QEI0 0x00000100 // QEI Module 0 Present +#define SYSCTL_DC2_SSI0 0x00000010 // SSI Module 0 Present +#define SYSCTL_DC2_UART1 0x00000002 // UART Module 1 Present +#define SYSCTL_DC2_UART0 0x00000001 // UART Module 0 Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DC3 register. +// +//***************************************************************************** +#define SYSCTL_DC3_32KHZ 0x80000000 // 32KHz Input Clock Available +#define SYSCTL_DC3_CCP1 0x02000000 // CCP1 Pin Present +#define SYSCTL_DC3_CCP0 0x01000000 // CCP0 Pin Present +#define SYSCTL_DC3_ADC3 0x00080000 // ADC3 Pin Present +#define SYSCTL_DC3_ADC2 0x00040000 // ADC2 Pin Present +#define SYSCTL_DC3_ADC1 0x00020000 // ADC1 Pin Present +#define SYSCTL_DC3_ADC0 0x00010000 // ADC0 Pin Present +#define SYSCTL_DC3_PWMFAULT 0x00008000 // PWM Fault Pin Present +#define SYSCTL_DC3_C0O 0x00000100 // C0o Pin Present +#define SYSCTL_DC3_C0PLUS 0x00000080 // C0+ Pin Present +#define SYSCTL_DC3_C0MINUS 0x00000040 // C0- Pin Present +#define SYSCTL_DC3_PWM5 0x00000020 // PWM5 Pin Present +#define SYSCTL_DC3_PWM4 0x00000010 // PWM4 Pin Present +#define SYSCTL_DC3_PWM3 0x00000008 // PWM3 Pin Present +#define SYSCTL_DC3_PWM2 0x00000004 // PWM2 Pin Present +#define SYSCTL_DC3_PWM1 0x00000002 // PWM1 Pin Present +#define SYSCTL_DC3_PWM0 0x00000001 // PWM0 Pin Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DC4 register. +// +//***************************************************************************** +#define SYSCTL_DC4_EPHY0 0x40000000 // Ethernet PHY Layer 0 Present +#define SYSCTL_DC4_EMAC0 0x10000000 // Ethernet MAC Layer 0 Present +#define SYSCTL_DC4_E1588 0x01000000 // 1588 Capable +#define SYSCTL_DC4_GPIOG 0x00000040 // GPIO Port G Present +#define SYSCTL_DC4_GPIOF 0x00000020 // GPIO Port F Present +#define SYSCTL_DC4_GPIOE 0x00000010 // GPIO Port E Present +#define SYSCTL_DC4_GPIOD 0x00000008 // GPIO Port D Present +#define SYSCTL_DC4_GPIOC 0x00000004 // GPIO Port C Present +#define SYSCTL_DC4_GPIOB 0x00000002 // GPIO Port B Present +#define SYSCTL_DC4_GPIOA 0x00000001 // GPIO Port A Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PBORCTL register. +// +//***************************************************************************** +#define SYSCTL_PBORCTL_BORIOR 0x00000002 // BOR Interrupt or Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_LDOPCTL register. +// +//***************************************************************************** +#define SYSCTL_LDOPCTL_M 0x0000003F // LDO Output Voltage +#define SYSCTL_LDOPCTL_2_50V 0x00000000 // 2.50 +#define SYSCTL_LDOPCTL_2_45V 0x00000001 // 2.45 +#define SYSCTL_LDOPCTL_2_40V 0x00000002 // 2.40 +#define SYSCTL_LDOPCTL_2_35V 0x00000003 // 2.35 +#define SYSCTL_LDOPCTL_2_30V 0x00000004 // 2.30 +#define SYSCTL_LDOPCTL_2_25V 0x00000005 // 2.25 +#define SYSCTL_LDOPCTL_2_75V 0x0000001B // 2.75 +#define SYSCTL_LDOPCTL_2_70V 0x0000001C // 2.70 +#define SYSCTL_LDOPCTL_2_65V 0x0000001D // 2.65 +#define SYSCTL_LDOPCTL_2_60V 0x0000001E // 2.60 +#define SYSCTL_LDOPCTL_2_55V 0x0000001F // 2.55 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRCR0 register. +// +//***************************************************************************** +#define SYSCTL_SRCR0_CAN0 0x01000000 // CAN0 Reset Control +#define SYSCTL_SRCR0_PWM 0x00100000 // PWM Reset Control +#define SYSCTL_SRCR0_ADC 0x00010000 // ADC0 Reset Control +#define SYSCTL_SRCR0_HIB 0x00000040 // HIB Reset Control +#define SYSCTL_SRCR0_WDT 0x00000008 // WDT Reset Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRCR1 register. +// +//***************************************************************************** +#define SYSCTL_SRCR1_COMP0 0x01000000 // Analog Comp 0 Reset Control +#define SYSCTL_SRCR1_TIMER3 0x00080000 // Timer 3 Reset Control +#define SYSCTL_SRCR1_TIMER2 0x00040000 // Timer 2 Reset Control +#define SYSCTL_SRCR1_TIMER1 0x00020000 // Timer 1 Reset Control +#define SYSCTL_SRCR1_TIMER0 0x00010000 // Timer 0 Reset Control +#define SYSCTL_SRCR1_I2C0 0x00001000 // I2C0 Reset Control +#define SYSCTL_SRCR1_QEI1 0x00000200 // QEI1 Reset Control +#define SYSCTL_SRCR1_QEI0 0x00000100 // QEI0 Reset Control +#define SYSCTL_SRCR1_SSI0 0x00000010 // SSI0 Reset Control +#define SYSCTL_SRCR1_UART1 0x00000002 // UART1 Reset Control +#define SYSCTL_SRCR1_UART0 0x00000001 // UART0 Reset Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRCR2 register. +// +//***************************************************************************** +#define SYSCTL_SRCR2_EPHY0 0x40000000 // PHY0 Reset Control +#define SYSCTL_SRCR2_EMAC0 0x10000000 // MAC0 Reset Control +#define SYSCTL_SRCR2_GPIOG 0x00000040 // Port G Reset Control +#define SYSCTL_SRCR2_GPIOF 0x00000020 // Port F Reset Control +#define SYSCTL_SRCR2_GPIOE 0x00000010 // Port E Reset Control +#define SYSCTL_SRCR2_GPIOD 0x00000008 // Port D Reset Control +#define SYSCTL_SRCR2_GPIOC 0x00000004 // Port C Reset Control +#define SYSCTL_SRCR2_GPIOB 0x00000002 // Port B Reset Control +#define SYSCTL_SRCR2_GPIOA 0x00000001 // Port A Reset Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RIS register. +// +//***************************************************************************** +#define SYSCTL_RIS_PLLLRIS 0x00000040 // PLL Lock Raw Interrupt Status +#define SYSCTL_RIS_BORRIS 0x00000002 // Brown-Out Reset Raw Interrupt + // Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_IMC register. +// +//***************************************************************************** +#define SYSCTL_IMC_PLLLIM 0x00000040 // PLL Lock Interrupt Mask +#define SYSCTL_IMC_BORIM 0x00000002 // Brown-Out Reset Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_MISC register. +// +//***************************************************************************** +#define SYSCTL_MISC_PLLLMIS 0x00000040 // PLL Lock Masked Interrupt Status +#define SYSCTL_MISC_BORMIS 0x00000002 // BOR Masked Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RESC register. +// +//***************************************************************************** +#define SYSCTL_RESC_SW 0x00000010 // Software Reset +#define SYSCTL_RESC_WDT 0x00000008 // Watchdog Timer Reset +#define SYSCTL_RESC_BOR 0x00000004 // Brown-Out Reset +#define SYSCTL_RESC_POR 0x00000002 // Power-On Reset +#define SYSCTL_RESC_EXT 0x00000001 // External Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCC register. +// +//***************************************************************************** +#define SYSCTL_RCC_ACG 0x08000000 // Auto Clock Gating +#define SYSCTL_RCC_SYSDIV_M 0x07800000 // System Clock Divisor +#define SYSCTL_RCC_SYSDIV_2 0x00800000 // System clock /2 +#define SYSCTL_RCC_SYSDIV_3 0x01000000 // System clock /3 +#define SYSCTL_RCC_SYSDIV_4 0x01800000 // System clock /4 +#define SYSCTL_RCC_SYSDIV_5 0x02000000 // System clock /5 +#define SYSCTL_RCC_SYSDIV_6 0x02800000 // System clock /6 +#define SYSCTL_RCC_SYSDIV_7 0x03000000 // System clock /7 +#define SYSCTL_RCC_SYSDIV_8 0x03800000 // System clock /8 +#define SYSCTL_RCC_SYSDIV_9 0x04000000 // System clock /9 +#define SYSCTL_RCC_SYSDIV_10 0x04800000 // System clock /10 +#define SYSCTL_RCC_SYSDIV_11 0x05000000 // System clock /11 +#define SYSCTL_RCC_SYSDIV_12 0x05800000 // System clock /12 +#define SYSCTL_RCC_SYSDIV_13 0x06000000 // System clock /13 +#define SYSCTL_RCC_SYSDIV_14 0x06800000 // System clock /14 +#define SYSCTL_RCC_SYSDIV_15 0x07000000 // System clock /15 +#define SYSCTL_RCC_SYSDIV_16 0x07800000 // System clock /16 +#define SYSCTL_RCC_USESYSDIV 0x00400000 // Enable System Clock Divider +#define SYSCTL_RCC_USEPWMDIV 0x00100000 // Enable PWM Clock Divisor +#define SYSCTL_RCC_PWMDIV_M 0x000E0000 // PWM Unit Clock Divisor +#define SYSCTL_RCC_PWMDIV_2 0x00000000 // PWM clock /2 +#define SYSCTL_RCC_PWMDIV_4 0x00020000 // PWM clock /4 +#define SYSCTL_RCC_PWMDIV_8 0x00040000 // PWM clock /8 +#define SYSCTL_RCC_PWMDIV_16 0x00060000 // PWM clock /16 +#define SYSCTL_RCC_PWMDIV_32 0x00080000 // PWM clock /32 +#define SYSCTL_RCC_PWMDIV_64 0x000A0000 // PWM clock /64 +#define SYSCTL_RCC_PWRDN 0x00002000 // PLL Power Down +#define SYSCTL_RCC_BYPASS 0x00000800 // PLL Bypass +#define SYSCTL_RCC_XTAL_M 0x000003C0 // Crystal Value +#define SYSCTL_RCC_XTAL_1MHZ 0x00000000 // 1 MHz +#define SYSCTL_RCC_XTAL_1_84MHZ 0x00000040 // 1.8432 MHz +#define SYSCTL_RCC_XTAL_2MHZ 0x00000080 // 2 MHz +#define SYSCTL_RCC_XTAL_2_45MHZ 0x000000C0 // 2.4576 MHz +#define SYSCTL_RCC_XTAL_3_57MHZ 0x00000100 // 3.579545 MHz +#define SYSCTL_RCC_XTAL_3_68MHZ 0x00000140 // 3.6864 MHz +#define SYSCTL_RCC_XTAL_4MHZ 0x00000180 // 4 MHz +#define SYSCTL_RCC_XTAL_4_09MHZ 0x000001C0 // 4.096 MHz +#define SYSCTL_RCC_XTAL_4_91MHZ 0x00000200 // 4.9152 MHz +#define SYSCTL_RCC_XTAL_5MHZ 0x00000240 // 5 MHz +#define SYSCTL_RCC_XTAL_5_12MHZ 0x00000280 // 5.12 MHz +#define SYSCTL_RCC_XTAL_6MHZ 0x000002C0 // 6 MHz +#define SYSCTL_RCC_XTAL_6_14MHZ 0x00000300 // 6.144 MHz +#define SYSCTL_RCC_XTAL_7_37MHZ 0x00000340 // 7.3728 MHz +#define SYSCTL_RCC_XTAL_8MHZ 0x00000380 // 8 MHz +#define SYSCTL_RCC_XTAL_8_19MHZ 0x000003C0 // 8.192 MHz +#define SYSCTL_RCC_OSCSRC_M 0x00000030 // Oscillator Source +#define SYSCTL_RCC_OSCSRC_MAIN 0x00000000 // MOSC +#define SYSCTL_RCC_OSCSRC_INT 0x00000010 // IOSC +#define SYSCTL_RCC_OSCSRC_INT4 0x00000020 // IOSC/4 +#define SYSCTL_RCC_OSCSRC_30 0x00000030 // 30 kHz +#define SYSCTL_RCC_IOSCDIS 0x00000002 // Internal Oscillator Disable +#define SYSCTL_RCC_MOSCDIS 0x00000001 // Main Oscillator Disable +#define SYSCTL_RCC_SYSDIV_S 23 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PLLCFG register. +// +//***************************************************************************** +#define SYSCTL_PLLCFG_F_M 0x00003FE0 // PLL F Value +#define SYSCTL_PLLCFG_R_M 0x0000001F // PLL R Value +#define SYSCTL_PLLCFG_F_S 5 +#define SYSCTL_PLLCFG_R_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCC2 register. +// +//***************************************************************************** +#define SYSCTL_RCC2_USERCC2 0x80000000 // Use RCC2 +#define SYSCTL_RCC2_SYSDIV2_M 0x1F800000 // System Clock Divisor 2 +#define SYSCTL_RCC2_SYSDIV2_2 0x00800000 // System clock /2 +#define SYSCTL_RCC2_SYSDIV2_3 0x01000000 // System clock /3 +#define SYSCTL_RCC2_SYSDIV2_4 0x01800000 // System clock /4 +#define SYSCTL_RCC2_SYSDIV2_5 0x02000000 // System clock /5 +#define SYSCTL_RCC2_SYSDIV2_6 0x02800000 // System clock /6 +#define SYSCTL_RCC2_SYSDIV2_7 0x03000000 // System clock /7 +#define SYSCTL_RCC2_SYSDIV2_8 0x03800000 // System clock /8 +#define SYSCTL_RCC2_SYSDIV2_9 0x04000000 // System clock /9 +#define SYSCTL_RCC2_SYSDIV2_10 0x04800000 // System clock /10 +#define SYSCTL_RCC2_SYSDIV2_11 0x05000000 // System clock /11 +#define SYSCTL_RCC2_SYSDIV2_12 0x05800000 // System clock /12 +#define SYSCTL_RCC2_SYSDIV2_13 0x06000000 // System clock /13 +#define SYSCTL_RCC2_SYSDIV2_14 0x06800000 // System clock /14 +#define SYSCTL_RCC2_SYSDIV2_15 0x07000000 // System clock /15 +#define SYSCTL_RCC2_SYSDIV2_16 0x07800000 // System clock /16 +#define SYSCTL_RCC2_SYSDIV2_17 0x08000000 // System clock /17 +#define SYSCTL_RCC2_SYSDIV2_18 0x08800000 // System clock /18 +#define SYSCTL_RCC2_SYSDIV2_19 0x09000000 // System clock /19 +#define SYSCTL_RCC2_SYSDIV2_20 0x09800000 // System clock /20 +#define SYSCTL_RCC2_SYSDIV2_21 0x0A000000 // System clock /21 +#define SYSCTL_RCC2_SYSDIV2_22 0x0A800000 // System clock /22 +#define SYSCTL_RCC2_SYSDIV2_23 0x0B000000 // System clock /23 +#define SYSCTL_RCC2_SYSDIV2_24 0x0B800000 // System clock /24 +#define SYSCTL_RCC2_SYSDIV2_25 0x0C000000 // System clock /25 +#define SYSCTL_RCC2_SYSDIV2_26 0x0C800000 // System clock /26 +#define SYSCTL_RCC2_SYSDIV2_27 0x0D000000 // System clock /27 +#define SYSCTL_RCC2_SYSDIV2_28 0x0D800000 // System clock /28 +#define SYSCTL_RCC2_SYSDIV2_29 0x0E000000 // System clock /29 +#define SYSCTL_RCC2_SYSDIV2_30 0x0E800000 // System clock /30 +#define SYSCTL_RCC2_SYSDIV2_31 0x0F000000 // System clock /31 +#define SYSCTL_RCC2_SYSDIV2_32 0x0F800000 // System clock /32 +#define SYSCTL_RCC2_SYSDIV2_33 0x10000000 // System clock /33 +#define SYSCTL_RCC2_SYSDIV2_34 0x10800000 // System clock /34 +#define SYSCTL_RCC2_SYSDIV2_35 0x11000000 // System clock /35 +#define SYSCTL_RCC2_SYSDIV2_36 0x11800000 // System clock /36 +#define SYSCTL_RCC2_SYSDIV2_37 0x12000000 // System clock /37 +#define SYSCTL_RCC2_SYSDIV2_38 0x12800000 // System clock /38 +#define SYSCTL_RCC2_SYSDIV2_39 0x13000000 // System clock /39 +#define SYSCTL_RCC2_SYSDIV2_40 0x13800000 // System clock /40 +#define SYSCTL_RCC2_SYSDIV2_41 0x14000000 // System clock /41 +#define SYSCTL_RCC2_SYSDIV2_42 0x14800000 // System clock /42 +#define SYSCTL_RCC2_SYSDIV2_43 0x15000000 // System clock /43 +#define SYSCTL_RCC2_SYSDIV2_44 0x15800000 // System clock /44 +#define SYSCTL_RCC2_SYSDIV2_45 0x16000000 // System clock /45 +#define SYSCTL_RCC2_SYSDIV2_46 0x16800000 // System clock /46 +#define SYSCTL_RCC2_SYSDIV2_47 0x17000000 // System clock /47 +#define SYSCTL_RCC2_SYSDIV2_48 0x17800000 // System clock /48 +#define SYSCTL_RCC2_SYSDIV2_49 0x18000000 // System clock /49 +#define SYSCTL_RCC2_SYSDIV2_50 0x18800000 // System clock /50 +#define SYSCTL_RCC2_SYSDIV2_51 0x19000000 // System clock /51 +#define SYSCTL_RCC2_SYSDIV2_52 0x19800000 // System clock /52 +#define SYSCTL_RCC2_SYSDIV2_53 0x1A000000 // System clock /53 +#define SYSCTL_RCC2_SYSDIV2_54 0x1A800000 // System clock /54 +#define SYSCTL_RCC2_SYSDIV2_55 0x1B000000 // System clock /55 +#define SYSCTL_RCC2_SYSDIV2_56 0x1B800000 // System clock /56 +#define SYSCTL_RCC2_SYSDIV2_57 0x1C000000 // System clock /57 +#define SYSCTL_RCC2_SYSDIV2_58 0x1C800000 // System clock /58 +#define SYSCTL_RCC2_SYSDIV2_59 0x1D000000 // System clock /59 +#define SYSCTL_RCC2_SYSDIV2_60 0x1D800000 // System clock /60 +#define SYSCTL_RCC2_SYSDIV2_61 0x1E000000 // System clock /61 +#define SYSCTL_RCC2_SYSDIV2_62 0x1E800000 // System clock /62 +#define SYSCTL_RCC2_SYSDIV2_63 0x1F000000 // System clock /63 +#define SYSCTL_RCC2_SYSDIV2_64 0x1F800000 // System clock /64 +#define SYSCTL_RCC2_PWRDN2 0x00002000 // Power-Down PLL 2 +#define SYSCTL_RCC2_BYPASS2 0x00000800 // PLL Bypass 2 +#define SYSCTL_RCC2_OSCSRC2_M 0x00000070 // Oscillator Source 2 +#define SYSCTL_RCC2_OSCSRC2_MO 0x00000000 // MOSC +#define SYSCTL_RCC2_OSCSRC2_IO 0x00000010 // PIOSC +#define SYSCTL_RCC2_OSCSRC2_IO4 0x00000020 // PIOSC/4 +#define SYSCTL_RCC2_OSCSRC2_30 0x00000030 // 30 kHz +#define SYSCTL_RCC2_OSCSRC2_32 0x00000070 // 32.768 kHz +#define SYSCTL_RCC2_SYSDIV2_S 23 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGC0 register. +// +//***************************************************************************** +#define SYSCTL_RCGC0_CAN0 0x01000000 // CAN0 Clock Gating Control +#define SYSCTL_RCGC0_PWM 0x00100000 // PWM Clock Gating Control +#define SYSCTL_RCGC0_ADC 0x00010000 // ADC0 Clock Gating Control +#define SYSCTL_RCGC0_ADCSPD_M 0x00000300 // ADC Sample Speed +#define SYSCTL_RCGC0_ADCSPD125K 0x00000000 // 125K samples/second +#define SYSCTL_RCGC0_ADCSPD250K 0x00000100 // 250K samples/second +#define SYSCTL_RCGC0_ADCSPD500K 0x00000200 // 500K samples/second +#define SYSCTL_RCGC0_HIB 0x00000040 // HIB Clock Gating Control +#define SYSCTL_RCGC0_WDT 0x00000008 // WDT Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGC1 register. +// +//***************************************************************************** +#define SYSCTL_RCGC1_COMP0 0x01000000 // Analog Comparator 0 Clock Gating +#define SYSCTL_RCGC1_TIMER3 0x00080000 // Timer 3 Clock Gating Control +#define SYSCTL_RCGC1_TIMER2 0x00040000 // Timer 2 Clock Gating Control +#define SYSCTL_RCGC1_TIMER1 0x00020000 // Timer 1 Clock Gating Control +#define SYSCTL_RCGC1_TIMER0 0x00010000 // Timer 0 Clock Gating Control +#define SYSCTL_RCGC1_I2C0 0x00001000 // I2C0 Clock Gating Control +#define SYSCTL_RCGC1_QEI1 0x00000200 // QEI1 Clock Gating Control +#define SYSCTL_RCGC1_QEI0 0x00000100 // QEI0 Clock Gating Control +#define SYSCTL_RCGC1_SSI0 0x00000010 // SSI0 Clock Gating Control +#define SYSCTL_RCGC1_UART1 0x00000002 // UART1 Clock Gating Control +#define SYSCTL_RCGC1_UART0 0x00000001 // UART0 Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGC2 register. +// +//***************************************************************************** +#define SYSCTL_RCGC2_EPHY0 0x40000000 // PHY0 Clock Gating Control +#define SYSCTL_RCGC2_EMAC0 0x10000000 // MAC0 Clock Gating Control +#define SYSCTL_RCGC2_GPIOG 0x00000040 // Port G Clock Gating Control +#define SYSCTL_RCGC2_GPIOF 0x00000020 // Port F Clock Gating Control +#define SYSCTL_RCGC2_GPIOE 0x00000010 // Port E Clock Gating Control +#define SYSCTL_RCGC2_GPIOD 0x00000008 // Port D Clock Gating Control +#define SYSCTL_RCGC2_GPIOC 0x00000004 // Port C Clock Gating Control +#define SYSCTL_RCGC2_GPIOB 0x00000002 // Port B Clock Gating Control +#define SYSCTL_RCGC2_GPIOA 0x00000001 // Port A Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGC0 register. +// +//***************************************************************************** +#define SYSCTL_SCGC0_CAN0 0x01000000 // CAN0 Clock Gating Control +#define SYSCTL_SCGC0_PWM 0x00100000 // PWM Clock Gating Control +#define SYSCTL_SCGC0_ADC 0x00010000 // ADC0 Clock Gating Control +#define SYSCTL_SCGC0_ADCSPD_M 0x00000300 // ADC Sample Speed +#define SYSCTL_SCGC0_ADCSPD125K 0x00000000 // 125K samples/second +#define SYSCTL_SCGC0_ADCSPD250K 0x00000100 // 250K samples/second +#define SYSCTL_SCGC0_ADCSPD500K 0x00000200 // 500K samples/second +#define SYSCTL_SCGC0_HIB 0x00000040 // HIB Clock Gating Control +#define SYSCTL_SCGC0_WDT 0x00000008 // WDT Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGC1 register. +// +//***************************************************************************** +#define SYSCTL_SCGC1_COMP0 0x01000000 // Analog Comparator 0 Clock Gating +#define SYSCTL_SCGC1_TIMER3 0x00080000 // Timer 3 Clock Gating Control +#define SYSCTL_SCGC1_TIMER2 0x00040000 // Timer 2 Clock Gating Control +#define SYSCTL_SCGC1_TIMER1 0x00020000 // Timer 1 Clock Gating Control +#define SYSCTL_SCGC1_TIMER0 0x00010000 // Timer 0 Clock Gating Control +#define SYSCTL_SCGC1_I2C0 0x00001000 // I2C0 Clock Gating Control +#define SYSCTL_SCGC1_QEI1 0x00000200 // QEI1 Clock Gating Control +#define SYSCTL_SCGC1_QEI0 0x00000100 // QEI0 Clock Gating Control +#define SYSCTL_SCGC1_SSI0 0x00000010 // SSI0 Clock Gating Control +#define SYSCTL_SCGC1_UART1 0x00000002 // UART1 Clock Gating Control +#define SYSCTL_SCGC1_UART0 0x00000001 // UART0 Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGC2 register. +// +//***************************************************************************** +#define SYSCTL_SCGC2_EPHY0 0x40000000 // PHY0 Clock Gating Control +#define SYSCTL_SCGC2_EMAC0 0x10000000 // MAC0 Clock Gating Control +#define SYSCTL_SCGC2_GPIOG 0x00000040 // Port G Clock Gating Control +#define SYSCTL_SCGC2_GPIOF 0x00000020 // Port F Clock Gating Control +#define SYSCTL_SCGC2_GPIOE 0x00000010 // Port E Clock Gating Control +#define SYSCTL_SCGC2_GPIOD 0x00000008 // Port D Clock Gating Control +#define SYSCTL_SCGC2_GPIOC 0x00000004 // Port C Clock Gating Control +#define SYSCTL_SCGC2_GPIOB 0x00000002 // Port B Clock Gating Control +#define SYSCTL_SCGC2_GPIOA 0x00000001 // Port A Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGC0 register. +// +//***************************************************************************** +#define SYSCTL_DCGC0_CAN0 0x01000000 // CAN0 Clock Gating Control +#define SYSCTL_DCGC0_PWM 0x00100000 // PWM Clock Gating Control +#define SYSCTL_DCGC0_ADC 0x00010000 // ADC0 Clock Gating Control +#define SYSCTL_DCGC0_HIB 0x00000040 // HIB Clock Gating Control +#define SYSCTL_DCGC0_WDT 0x00000008 // WDT Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGC1 register. +// +//***************************************************************************** +#define SYSCTL_DCGC1_COMP0 0x01000000 // Analog Comparator 0 Clock Gating +#define SYSCTL_DCGC1_TIMER3 0x00080000 // Timer 3 Clock Gating Control +#define SYSCTL_DCGC1_TIMER2 0x00040000 // Timer 2 Clock Gating Control +#define SYSCTL_DCGC1_TIMER1 0x00020000 // Timer 1 Clock Gating Control +#define SYSCTL_DCGC1_TIMER0 0x00010000 // Timer 0 Clock Gating Control +#define SYSCTL_DCGC1_I2C0 0x00001000 // I2C0 Clock Gating Control +#define SYSCTL_DCGC1_QEI1 0x00000200 // QEI1 Clock Gating Control +#define SYSCTL_DCGC1_QEI0 0x00000100 // QEI0 Clock Gating Control +#define SYSCTL_DCGC1_SSI0 0x00000010 // SSI0 Clock Gating Control +#define SYSCTL_DCGC1_UART1 0x00000002 // UART1 Clock Gating Control +#define SYSCTL_DCGC1_UART0 0x00000001 // UART0 Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGC2 register. +// +//***************************************************************************** +#define SYSCTL_DCGC2_EPHY0 0x40000000 // PHY0 Clock Gating Control +#define SYSCTL_DCGC2_EMAC0 0x10000000 // MAC0 Clock Gating Control +#define SYSCTL_DCGC2_GPIOG 0x00000040 // Port G Clock Gating Control +#define SYSCTL_DCGC2_GPIOF 0x00000020 // Port F Clock Gating Control +#define SYSCTL_DCGC2_GPIOE 0x00000010 // Port E Clock Gating Control +#define SYSCTL_DCGC2_GPIOD 0x00000008 // Port D Clock Gating Control +#define SYSCTL_DCGC2_GPIOC 0x00000004 // Port C Clock Gating Control +#define SYSCTL_DCGC2_GPIOB 0x00000002 // Port B Clock Gating Control +#define SYSCTL_DCGC2_GPIOA 0x00000001 // Port A Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DSLPCLKCFG +// register. +// +//***************************************************************************** +#define SYSCTL_DSLPCLKCFG_D_M 0x1F800000 // Divider Field Override +#define SYSCTL_DSLPCLKCFG_D_1 0x00000000 // System clock /1 +#define SYSCTL_DSLPCLKCFG_D_2 0x00800000 // System clock /2 +#define SYSCTL_DSLPCLKCFG_D_3 0x01000000 // System clock /3 +#define SYSCTL_DSLPCLKCFG_D_4 0x01800000 // System clock /4 +#define SYSCTL_DSLPCLKCFG_D_5 0x02000000 // System clock /5 +#define SYSCTL_DSLPCLKCFG_D_6 0x02800000 // System clock /6 +#define SYSCTL_DSLPCLKCFG_D_7 0x03000000 // System clock /7 +#define SYSCTL_DSLPCLKCFG_D_8 0x03800000 // System clock /8 +#define SYSCTL_DSLPCLKCFG_D_9 0x04000000 // System clock /9 +#define SYSCTL_DSLPCLKCFG_D_10 0x04800000 // System clock /10 +#define SYSCTL_DSLPCLKCFG_D_11 0x05000000 // System clock /11 +#define SYSCTL_DSLPCLKCFG_D_12 0x05800000 // System clock /12 +#define SYSCTL_DSLPCLKCFG_D_13 0x06000000 // System clock /13 +#define SYSCTL_DSLPCLKCFG_D_14 0x06800000 // System clock /14 +#define SYSCTL_DSLPCLKCFG_D_15 0x07000000 // System clock /15 +#define SYSCTL_DSLPCLKCFG_D_16 0x07800000 // System clock /16 +#define SYSCTL_DSLPCLKCFG_D_17 0x08000000 // System clock /17 +#define SYSCTL_DSLPCLKCFG_D_18 0x08800000 // System clock /18 +#define SYSCTL_DSLPCLKCFG_D_19 0x09000000 // System clock /19 +#define SYSCTL_DSLPCLKCFG_D_20 0x09800000 // System clock /20 +#define SYSCTL_DSLPCLKCFG_D_21 0x0A000000 // System clock /21 +#define SYSCTL_DSLPCLKCFG_D_22 0x0A800000 // System clock /22 +#define SYSCTL_DSLPCLKCFG_D_23 0x0B000000 // System clock /23 +#define SYSCTL_DSLPCLKCFG_D_24 0x0B800000 // System clock /24 +#define SYSCTL_DSLPCLKCFG_D_25 0x0C000000 // System clock /25 +#define SYSCTL_DSLPCLKCFG_D_26 0x0C800000 // System clock /26 +#define SYSCTL_DSLPCLKCFG_D_27 0x0D000000 // System clock /27 +#define SYSCTL_DSLPCLKCFG_D_28 0x0D800000 // System clock /28 +#define SYSCTL_DSLPCLKCFG_D_29 0x0E000000 // System clock /29 +#define SYSCTL_DSLPCLKCFG_D_30 0x0E800000 // System clock /30 +#define SYSCTL_DSLPCLKCFG_D_31 0x0F000000 // System clock /31 +#define SYSCTL_DSLPCLKCFG_D_32 0x0F800000 // System clock /32 +#define SYSCTL_DSLPCLKCFG_D_33 0x10000000 // System clock /33 +#define SYSCTL_DSLPCLKCFG_D_34 0x10800000 // System clock /34 +#define SYSCTL_DSLPCLKCFG_D_35 0x11000000 // System clock /35 +#define SYSCTL_DSLPCLKCFG_D_36 0x11800000 // System clock /36 +#define SYSCTL_DSLPCLKCFG_D_37 0x12000000 // System clock /37 +#define SYSCTL_DSLPCLKCFG_D_38 0x12800000 // System clock /38 +#define SYSCTL_DSLPCLKCFG_D_39 0x13000000 // System clock /39 +#define SYSCTL_DSLPCLKCFG_D_40 0x13800000 // System clock /40 +#define SYSCTL_DSLPCLKCFG_D_41 0x14000000 // System clock /41 +#define SYSCTL_DSLPCLKCFG_D_42 0x14800000 // System clock /42 +#define SYSCTL_DSLPCLKCFG_D_43 0x15000000 // System clock /43 +#define SYSCTL_DSLPCLKCFG_D_44 0x15800000 // System clock /44 +#define SYSCTL_DSLPCLKCFG_D_45 0x16000000 // System clock /45 +#define SYSCTL_DSLPCLKCFG_D_46 0x16800000 // System clock /46 +#define SYSCTL_DSLPCLKCFG_D_47 0x17000000 // System clock /47 +#define SYSCTL_DSLPCLKCFG_D_48 0x17800000 // System clock /48 +#define SYSCTL_DSLPCLKCFG_D_49 0x18000000 // System clock /49 +#define SYSCTL_DSLPCLKCFG_D_50 0x18800000 // System clock /50 +#define SYSCTL_DSLPCLKCFG_D_51 0x19000000 // System clock /51 +#define SYSCTL_DSLPCLKCFG_D_52 0x19800000 // System clock /52 +#define SYSCTL_DSLPCLKCFG_D_53 0x1A000000 // System clock /53 +#define SYSCTL_DSLPCLKCFG_D_54 0x1A800000 // System clock /54 +#define SYSCTL_DSLPCLKCFG_D_55 0x1B000000 // System clock /55 +#define SYSCTL_DSLPCLKCFG_D_56 0x1B800000 // System clock /56 +#define SYSCTL_DSLPCLKCFG_D_57 0x1C000000 // System clock /57 +#define SYSCTL_DSLPCLKCFG_D_58 0x1C800000 // System clock /58 +#define SYSCTL_DSLPCLKCFG_D_59 0x1D000000 // System clock /59 +#define SYSCTL_DSLPCLKCFG_D_60 0x1D800000 // System clock /60 +#define SYSCTL_DSLPCLKCFG_D_61 0x1E000000 // System clock /61 +#define SYSCTL_DSLPCLKCFG_D_62 0x1E800000 // System clock /62 +#define SYSCTL_DSLPCLKCFG_D_63 0x1F000000 // System clock /63 +#define SYSCTL_DSLPCLKCFG_D_64 0x1F800000 // System clock /64 +#define SYSCTL_DSLPCLKCFG_O_M 0x00000070 // Clock Source +#define SYSCTL_DSLPCLKCFG_O_IGN 0x00000000 // MOSC +#define SYSCTL_DSLPCLKCFG_O_IO 0x00000010 // PIOSC +#define SYSCTL_DSLPCLKCFG_O_30 0x00000030 // 30 kHz +#define SYSCTL_DSLPCLKCFG_O_32 0x00000070 // 32.768 kHz +#define SYSCTL_DSLPCLKCFG_D_S 23 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_INT_TYPE register. +// +//***************************************************************************** +#define NVIC_INT_TYPE_LINES_M 0x0000001F // Number of interrupt lines (x32) +#define NVIC_INT_TYPE_LINES_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_ST_CTRL register. +// +//***************************************************************************** +#define NVIC_ST_CTRL_COUNT 0x00010000 // Count flag +#define NVIC_ST_CTRL_CLK_SRC 0x00000004 // Clock Source +#define NVIC_ST_CTRL_INTEN 0x00000002 // Interrupt enable +#define NVIC_ST_CTRL_ENABLE 0x00000001 // Counter mode + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_ST_RELOAD register. +// +//***************************************************************************** +#define NVIC_ST_RELOAD_M 0x00FFFFFF // Counter load value +#define NVIC_ST_RELOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_ST_CURRENT +// register. +// +//***************************************************************************** +#define NVIC_ST_CURRENT_M 0x00FFFFFF // Counter current value +#define NVIC_ST_CURRENT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_ST_CAL register. +// +//***************************************************************************** +#define NVIC_ST_CAL_NOREF 0x80000000 // No reference clock +#define NVIC_ST_CAL_SKEW 0x40000000 // Clock skew +#define NVIC_ST_CAL_ONEMS_M 0x00FFFFFF // 1ms reference value +#define NVIC_ST_CAL_ONEMS_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_EN0 register. +// +//***************************************************************************** +#define NVIC_EN0_INT31 0x80000000 // Interrupt 31 enable +#define NVIC_EN0_INT30 0x40000000 // Interrupt 30 enable +#define NVIC_EN0_INT29 0x20000000 // Interrupt 29 enable +#define NVIC_EN0_INT28 0x10000000 // Interrupt 28 enable +#define NVIC_EN0_INT27 0x08000000 // Interrupt 27 enable +#define NVIC_EN0_INT26 0x04000000 // Interrupt 26 enable +#define NVIC_EN0_INT25 0x02000000 // Interrupt 25 enable +#define NVIC_EN0_INT24 0x01000000 // Interrupt 24 enable +#define NVIC_EN0_INT23 0x00800000 // Interrupt 23 enable +#define NVIC_EN0_INT22 0x00400000 // Interrupt 22 enable +#define NVIC_EN0_INT21 0x00200000 // Interrupt 21 enable +#define NVIC_EN0_INT20 0x00100000 // Interrupt 20 enable +#define NVIC_EN0_INT19 0x00080000 // Interrupt 19 enable +#define NVIC_EN0_INT18 0x00040000 // Interrupt 18 enable +#define NVIC_EN0_INT17 0x00020000 // Interrupt 17 enable +#define NVIC_EN0_INT16 0x00010000 // Interrupt 16 enable +#define NVIC_EN0_INT15 0x00008000 // Interrupt 15 enable +#define NVIC_EN0_INT14 0x00004000 // Interrupt 14 enable +#define NVIC_EN0_INT13 0x00002000 // Interrupt 13 enable +#define NVIC_EN0_INT12 0x00001000 // Interrupt 12 enable +#define NVIC_EN0_INT11 0x00000800 // Interrupt 11 enable +#define NVIC_EN0_INT10 0x00000400 // Interrupt 10 enable +#define NVIC_EN0_INT9 0x00000200 // Interrupt 9 enable +#define NVIC_EN0_INT8 0x00000100 // Interrupt 8 enable +#define NVIC_EN0_INT7 0x00000080 // Interrupt 7 enable +#define NVIC_EN0_INT6 0x00000040 // Interrupt 6 enable +#define NVIC_EN0_INT5 0x00000020 // Interrupt 5 enable +#define NVIC_EN0_INT4 0x00000010 // Interrupt 4 enable +#define NVIC_EN0_INT3 0x00000008 // Interrupt 3 enable +#define NVIC_EN0_INT2 0x00000004 // Interrupt 2 enable +#define NVIC_EN0_INT1 0x00000002 // Interrupt 1 enable +#define NVIC_EN0_INT0 0x00000001 // Interrupt 0 enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_EN1 register. +// +//***************************************************************************** +#define NVIC_EN1_INT59 0x08000000 // Interrupt 59 enable +#define NVIC_EN1_INT58 0x04000000 // Interrupt 58 enable +#define NVIC_EN1_INT57 0x02000000 // Interrupt 57 enable +#define NVIC_EN1_INT56 0x01000000 // Interrupt 56 enable +#define NVIC_EN1_INT55 0x00800000 // Interrupt 55 enable +#define NVIC_EN1_INT54 0x00400000 // Interrupt 54 enable +#define NVIC_EN1_INT53 0x00200000 // Interrupt 53 enable +#define NVIC_EN1_INT52 0x00100000 // Interrupt 52 enable +#define NVIC_EN1_INT51 0x00080000 // Interrupt 51 enable +#define NVIC_EN1_INT50 0x00040000 // Interrupt 50 enable +#define NVIC_EN1_INT49 0x00020000 // Interrupt 49 enable +#define NVIC_EN1_INT48 0x00010000 // Interrupt 48 enable +#define NVIC_EN1_INT47 0x00008000 // Interrupt 47 enable +#define NVIC_EN1_INT46 0x00004000 // Interrupt 46 enable +#define NVIC_EN1_INT45 0x00002000 // Interrupt 45 enable +#define NVIC_EN1_INT44 0x00001000 // Interrupt 44 enable +#define NVIC_EN1_INT43 0x00000800 // Interrupt 43 enable +#define NVIC_EN1_INT42 0x00000400 // Interrupt 42 enable +#define NVIC_EN1_INT41 0x00000200 // Interrupt 41 enable +#define NVIC_EN1_INT40 0x00000100 // Interrupt 40 enable +#define NVIC_EN1_INT39 0x00000080 // Interrupt 39 enable +#define NVIC_EN1_INT38 0x00000040 // Interrupt 38 enable +#define NVIC_EN1_INT37 0x00000020 // Interrupt 37 enable +#define NVIC_EN1_INT36 0x00000010 // Interrupt 36 enable +#define NVIC_EN1_INT35 0x00000008 // Interrupt 35 enable +#define NVIC_EN1_INT34 0x00000004 // Interrupt 34 enable +#define NVIC_EN1_INT33 0x00000002 // Interrupt 33 enable +#define NVIC_EN1_INT32 0x00000001 // Interrupt 32 enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_DIS0 register. +// +//***************************************************************************** +#define NVIC_DIS0_INT31 0x80000000 // Interrupt 31 disable +#define NVIC_DIS0_INT30 0x40000000 // Interrupt 30 disable +#define NVIC_DIS0_INT29 0x20000000 // Interrupt 29 disable +#define NVIC_DIS0_INT28 0x10000000 // Interrupt 28 disable +#define NVIC_DIS0_INT27 0x08000000 // Interrupt 27 disable +#define NVIC_DIS0_INT26 0x04000000 // Interrupt 26 disable +#define NVIC_DIS0_INT25 0x02000000 // Interrupt 25 disable +#define NVIC_DIS0_INT24 0x01000000 // Interrupt 24 disable +#define NVIC_DIS0_INT23 0x00800000 // Interrupt 23 disable +#define NVIC_DIS0_INT22 0x00400000 // Interrupt 22 disable +#define NVIC_DIS0_INT21 0x00200000 // Interrupt 21 disable +#define NVIC_DIS0_INT20 0x00100000 // Interrupt 20 disable +#define NVIC_DIS0_INT19 0x00080000 // Interrupt 19 disable +#define NVIC_DIS0_INT18 0x00040000 // Interrupt 18 disable +#define NVIC_DIS0_INT17 0x00020000 // Interrupt 17 disable +#define NVIC_DIS0_INT16 0x00010000 // Interrupt 16 disable +#define NVIC_DIS0_INT15 0x00008000 // Interrupt 15 disable +#define NVIC_DIS0_INT14 0x00004000 // Interrupt 14 disable +#define NVIC_DIS0_INT13 0x00002000 // Interrupt 13 disable +#define NVIC_DIS0_INT12 0x00001000 // Interrupt 12 disable +#define NVIC_DIS0_INT11 0x00000800 // Interrupt 11 disable +#define NVIC_DIS0_INT10 0x00000400 // Interrupt 10 disable +#define NVIC_DIS0_INT9 0x00000200 // Interrupt 9 disable +#define NVIC_DIS0_INT8 0x00000100 // Interrupt 8 disable +#define NVIC_DIS0_INT7 0x00000080 // Interrupt 7 disable +#define NVIC_DIS0_INT6 0x00000040 // Interrupt 6 disable +#define NVIC_DIS0_INT5 0x00000020 // Interrupt 5 disable +#define NVIC_DIS0_INT4 0x00000010 // Interrupt 4 disable +#define NVIC_DIS0_INT3 0x00000008 // Interrupt 3 disable +#define NVIC_DIS0_INT2 0x00000004 // Interrupt 2 disable +#define NVIC_DIS0_INT1 0x00000002 // Interrupt 1 disable +#define NVIC_DIS0_INT0 0x00000001 // Interrupt 0 disable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_DIS1 register. +// +//***************************************************************************** +#define NVIC_DIS1_INT59 0x08000000 // Interrupt 59 disable +#define NVIC_DIS1_INT58 0x04000000 // Interrupt 58 disable +#define NVIC_DIS1_INT57 0x02000000 // Interrupt 57 disable +#define NVIC_DIS1_INT56 0x01000000 // Interrupt 56 disable +#define NVIC_DIS1_INT55 0x00800000 // Interrupt 55 disable +#define NVIC_DIS1_INT54 0x00400000 // Interrupt 54 disable +#define NVIC_DIS1_INT53 0x00200000 // Interrupt 53 disable +#define NVIC_DIS1_INT52 0x00100000 // Interrupt 52 disable +#define NVIC_DIS1_INT51 0x00080000 // Interrupt 51 disable +#define NVIC_DIS1_INT50 0x00040000 // Interrupt 50 disable +#define NVIC_DIS1_INT49 0x00020000 // Interrupt 49 disable +#define NVIC_DIS1_INT48 0x00010000 // Interrupt 48 disable +#define NVIC_DIS1_INT47 0x00008000 // Interrupt 47 disable +#define NVIC_DIS1_INT46 0x00004000 // Interrupt 46 disable +#define NVIC_DIS1_INT45 0x00002000 // Interrupt 45 disable +#define NVIC_DIS1_INT44 0x00001000 // Interrupt 44 disable +#define NVIC_DIS1_INT43 0x00000800 // Interrupt 43 disable +#define NVIC_DIS1_INT42 0x00000400 // Interrupt 42 disable +#define NVIC_DIS1_INT41 0x00000200 // Interrupt 41 disable +#define NVIC_DIS1_INT40 0x00000100 // Interrupt 40 disable +#define NVIC_DIS1_INT39 0x00000080 // Interrupt 39 disable +#define NVIC_DIS1_INT38 0x00000040 // Interrupt 38 disable +#define NVIC_DIS1_INT37 0x00000020 // Interrupt 37 disable +#define NVIC_DIS1_INT36 0x00000010 // Interrupt 36 disable +#define NVIC_DIS1_INT35 0x00000008 // Interrupt 35 disable +#define NVIC_DIS1_INT34 0x00000004 // Interrupt 34 disable +#define NVIC_DIS1_INT33 0x00000002 // Interrupt 33 disable +#define NVIC_DIS1_INT32 0x00000001 // Interrupt 32 disable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PEND0 register. +// +//***************************************************************************** +#define NVIC_PEND0_INT31 0x80000000 // Interrupt 31 pend +#define NVIC_PEND0_INT30 0x40000000 // Interrupt 30 pend +#define NVIC_PEND0_INT29 0x20000000 // Interrupt 29 pend +#define NVIC_PEND0_INT28 0x10000000 // Interrupt 28 pend +#define NVIC_PEND0_INT27 0x08000000 // Interrupt 27 pend +#define NVIC_PEND0_INT26 0x04000000 // Interrupt 26 pend +#define NVIC_PEND0_INT25 0x02000000 // Interrupt 25 pend +#define NVIC_PEND0_INT24 0x01000000 // Interrupt 24 pend +#define NVIC_PEND0_INT23 0x00800000 // Interrupt 23 pend +#define NVIC_PEND0_INT22 0x00400000 // Interrupt 22 pend +#define NVIC_PEND0_INT21 0x00200000 // Interrupt 21 pend +#define NVIC_PEND0_INT20 0x00100000 // Interrupt 20 pend +#define NVIC_PEND0_INT19 0x00080000 // Interrupt 19 pend +#define NVIC_PEND0_INT18 0x00040000 // Interrupt 18 pend +#define NVIC_PEND0_INT17 0x00020000 // Interrupt 17 pend +#define NVIC_PEND0_INT16 0x00010000 // Interrupt 16 pend +#define NVIC_PEND0_INT15 0x00008000 // Interrupt 15 pend +#define NVIC_PEND0_INT14 0x00004000 // Interrupt 14 pend +#define NVIC_PEND0_INT13 0x00002000 // Interrupt 13 pend +#define NVIC_PEND0_INT12 0x00001000 // Interrupt 12 pend +#define NVIC_PEND0_INT11 0x00000800 // Interrupt 11 pend +#define NVIC_PEND0_INT10 0x00000400 // Interrupt 10 pend +#define NVIC_PEND0_INT9 0x00000200 // Interrupt 9 pend +#define NVIC_PEND0_INT8 0x00000100 // Interrupt 8 pend +#define NVIC_PEND0_INT7 0x00000080 // Interrupt 7 pend +#define NVIC_PEND0_INT6 0x00000040 // Interrupt 6 pend +#define NVIC_PEND0_INT5 0x00000020 // Interrupt 5 pend +#define NVIC_PEND0_INT4 0x00000010 // Interrupt 4 pend +#define NVIC_PEND0_INT3 0x00000008 // Interrupt 3 pend +#define NVIC_PEND0_INT2 0x00000004 // Interrupt 2 pend +#define NVIC_PEND0_INT1 0x00000002 // Interrupt 1 pend +#define NVIC_PEND0_INT0 0x00000001 // Interrupt 0 pend + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PEND1 register. +// +//***************************************************************************** +#define NVIC_PEND1_INT59 0x08000000 // Interrupt 59 pend +#define NVIC_PEND1_INT58 0x04000000 // Interrupt 58 pend +#define NVIC_PEND1_INT57 0x02000000 // Interrupt 57 pend +#define NVIC_PEND1_INT56 0x01000000 // Interrupt 56 pend +#define NVIC_PEND1_INT55 0x00800000 // Interrupt 55 pend +#define NVIC_PEND1_INT54 0x00400000 // Interrupt 54 pend +#define NVIC_PEND1_INT53 0x00200000 // Interrupt 53 pend +#define NVIC_PEND1_INT52 0x00100000 // Interrupt 52 pend +#define NVIC_PEND1_INT51 0x00080000 // Interrupt 51 pend +#define NVIC_PEND1_INT50 0x00040000 // Interrupt 50 pend +#define NVIC_PEND1_INT49 0x00020000 // Interrupt 49 pend +#define NVIC_PEND1_INT48 0x00010000 // Interrupt 48 pend +#define NVIC_PEND1_INT47 0x00008000 // Interrupt 47 pend +#define NVIC_PEND1_INT46 0x00004000 // Interrupt 46 pend +#define NVIC_PEND1_INT45 0x00002000 // Interrupt 45 pend +#define NVIC_PEND1_INT44 0x00001000 // Interrupt 44 pend +#define NVIC_PEND1_INT43 0x00000800 // Interrupt 43 pend +#define NVIC_PEND1_INT42 0x00000400 // Interrupt 42 pend +#define NVIC_PEND1_INT41 0x00000200 // Interrupt 41 pend +#define NVIC_PEND1_INT40 0x00000100 // Interrupt 40 pend +#define NVIC_PEND1_INT39 0x00000080 // Interrupt 39 pend +#define NVIC_PEND1_INT38 0x00000040 // Interrupt 38 pend +#define NVIC_PEND1_INT37 0x00000020 // Interrupt 37 pend +#define NVIC_PEND1_INT36 0x00000010 // Interrupt 36 pend +#define NVIC_PEND1_INT35 0x00000008 // Interrupt 35 pend +#define NVIC_PEND1_INT34 0x00000004 // Interrupt 34 pend +#define NVIC_PEND1_INT33 0x00000002 // Interrupt 33 pend +#define NVIC_PEND1_INT32 0x00000001 // Interrupt 32 pend + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_UNPEND0 register. +// +//***************************************************************************** +#define NVIC_UNPEND0_INT31 0x80000000 // Interrupt 31 unpend +#define NVIC_UNPEND0_INT30 0x40000000 // Interrupt 30 unpend +#define NVIC_UNPEND0_INT29 0x20000000 // Interrupt 29 unpend +#define NVIC_UNPEND0_INT28 0x10000000 // Interrupt 28 unpend +#define NVIC_UNPEND0_INT27 0x08000000 // Interrupt 27 unpend +#define NVIC_UNPEND0_INT26 0x04000000 // Interrupt 26 unpend +#define NVIC_UNPEND0_INT25 0x02000000 // Interrupt 25 unpend +#define NVIC_UNPEND0_INT24 0x01000000 // Interrupt 24 unpend +#define NVIC_UNPEND0_INT23 0x00800000 // Interrupt 23 unpend +#define NVIC_UNPEND0_INT22 0x00400000 // Interrupt 22 unpend +#define NVIC_UNPEND0_INT21 0x00200000 // Interrupt 21 unpend +#define NVIC_UNPEND0_INT20 0x00100000 // Interrupt 20 unpend +#define NVIC_UNPEND0_INT19 0x00080000 // Interrupt 19 unpend +#define NVIC_UNPEND0_INT18 0x00040000 // Interrupt 18 unpend +#define NVIC_UNPEND0_INT17 0x00020000 // Interrupt 17 unpend +#define NVIC_UNPEND0_INT16 0x00010000 // Interrupt 16 unpend +#define NVIC_UNPEND0_INT15 0x00008000 // Interrupt 15 unpend +#define NVIC_UNPEND0_INT14 0x00004000 // Interrupt 14 unpend +#define NVIC_UNPEND0_INT13 0x00002000 // Interrupt 13 unpend +#define NVIC_UNPEND0_INT12 0x00001000 // Interrupt 12 unpend +#define NVIC_UNPEND0_INT11 0x00000800 // Interrupt 11 unpend +#define NVIC_UNPEND0_INT10 0x00000400 // Interrupt 10 unpend +#define NVIC_UNPEND0_INT9 0x00000200 // Interrupt 9 unpend +#define NVIC_UNPEND0_INT8 0x00000100 // Interrupt 8 unpend +#define NVIC_UNPEND0_INT7 0x00000080 // Interrupt 7 unpend +#define NVIC_UNPEND0_INT6 0x00000040 // Interrupt 6 unpend +#define NVIC_UNPEND0_INT5 0x00000020 // Interrupt 5 unpend +#define NVIC_UNPEND0_INT4 0x00000010 // Interrupt 4 unpend +#define NVIC_UNPEND0_INT3 0x00000008 // Interrupt 3 unpend +#define NVIC_UNPEND0_INT2 0x00000004 // Interrupt 2 unpend +#define NVIC_UNPEND0_INT1 0x00000002 // Interrupt 1 unpend +#define NVIC_UNPEND0_INT0 0x00000001 // Interrupt 0 unpend + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_UNPEND1 register. +// +//***************************************************************************** +#define NVIC_UNPEND1_INT59 0x08000000 // Interrupt 59 unpend +#define NVIC_UNPEND1_INT58 0x04000000 // Interrupt 58 unpend +#define NVIC_UNPEND1_INT57 0x02000000 // Interrupt 57 unpend +#define NVIC_UNPEND1_INT56 0x01000000 // Interrupt 56 unpend +#define NVIC_UNPEND1_INT55 0x00800000 // Interrupt 55 unpend +#define NVIC_UNPEND1_INT54 0x00400000 // Interrupt 54 unpend +#define NVIC_UNPEND1_INT53 0x00200000 // Interrupt 53 unpend +#define NVIC_UNPEND1_INT52 0x00100000 // Interrupt 52 unpend +#define NVIC_UNPEND1_INT51 0x00080000 // Interrupt 51 unpend +#define NVIC_UNPEND1_INT50 0x00040000 // Interrupt 50 unpend +#define NVIC_UNPEND1_INT49 0x00020000 // Interrupt 49 unpend +#define NVIC_UNPEND1_INT48 0x00010000 // Interrupt 48 unpend +#define NVIC_UNPEND1_INT47 0x00008000 // Interrupt 47 unpend +#define NVIC_UNPEND1_INT46 0x00004000 // Interrupt 46 unpend +#define NVIC_UNPEND1_INT45 0x00002000 // Interrupt 45 unpend +#define NVIC_UNPEND1_INT44 0x00001000 // Interrupt 44 unpend +#define NVIC_UNPEND1_INT43 0x00000800 // Interrupt 43 unpend +#define NVIC_UNPEND1_INT42 0x00000400 // Interrupt 42 unpend +#define NVIC_UNPEND1_INT41 0x00000200 // Interrupt 41 unpend +#define NVIC_UNPEND1_INT40 0x00000100 // Interrupt 40 unpend +#define NVIC_UNPEND1_INT39 0x00000080 // Interrupt 39 unpend +#define NVIC_UNPEND1_INT38 0x00000040 // Interrupt 38 unpend +#define NVIC_UNPEND1_INT37 0x00000020 // Interrupt 37 unpend +#define NVIC_UNPEND1_INT36 0x00000010 // Interrupt 36 unpend +#define NVIC_UNPEND1_INT35 0x00000008 // Interrupt 35 unpend +#define NVIC_UNPEND1_INT34 0x00000004 // Interrupt 34 unpend +#define NVIC_UNPEND1_INT33 0x00000002 // Interrupt 33 unpend +#define NVIC_UNPEND1_INT32 0x00000001 // Interrupt 32 unpend + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_ACTIVE0 register. +// +//***************************************************************************** +#define NVIC_ACTIVE0_INT31 0x80000000 // Interrupt 31 active +#define NVIC_ACTIVE0_INT30 0x40000000 // Interrupt 30 active +#define NVIC_ACTIVE0_INT29 0x20000000 // Interrupt 29 active +#define NVIC_ACTIVE0_INT28 0x10000000 // Interrupt 28 active +#define NVIC_ACTIVE0_INT27 0x08000000 // Interrupt 27 active +#define NVIC_ACTIVE0_INT26 0x04000000 // Interrupt 26 active +#define NVIC_ACTIVE0_INT25 0x02000000 // Interrupt 25 active +#define NVIC_ACTIVE0_INT24 0x01000000 // Interrupt 24 active +#define NVIC_ACTIVE0_INT23 0x00800000 // Interrupt 23 active +#define NVIC_ACTIVE0_INT22 0x00400000 // Interrupt 22 active +#define NVIC_ACTIVE0_INT21 0x00200000 // Interrupt 21 active +#define NVIC_ACTIVE0_INT20 0x00100000 // Interrupt 20 active +#define NVIC_ACTIVE0_INT19 0x00080000 // Interrupt 19 active +#define NVIC_ACTIVE0_INT18 0x00040000 // Interrupt 18 active +#define NVIC_ACTIVE0_INT17 0x00020000 // Interrupt 17 active +#define NVIC_ACTIVE0_INT16 0x00010000 // Interrupt 16 active +#define NVIC_ACTIVE0_INT15 0x00008000 // Interrupt 15 active +#define NVIC_ACTIVE0_INT14 0x00004000 // Interrupt 14 active +#define NVIC_ACTIVE0_INT13 0x00002000 // Interrupt 13 active +#define NVIC_ACTIVE0_INT12 0x00001000 // Interrupt 12 active +#define NVIC_ACTIVE0_INT11 0x00000800 // Interrupt 11 active +#define NVIC_ACTIVE0_INT10 0x00000400 // Interrupt 10 active +#define NVIC_ACTIVE0_INT9 0x00000200 // Interrupt 9 active +#define NVIC_ACTIVE0_INT8 0x00000100 // Interrupt 8 active +#define NVIC_ACTIVE0_INT7 0x00000080 // Interrupt 7 active +#define NVIC_ACTIVE0_INT6 0x00000040 // Interrupt 6 active +#define NVIC_ACTIVE0_INT5 0x00000020 // Interrupt 5 active +#define NVIC_ACTIVE0_INT4 0x00000010 // Interrupt 4 active +#define NVIC_ACTIVE0_INT3 0x00000008 // Interrupt 3 active +#define NVIC_ACTIVE0_INT2 0x00000004 // Interrupt 2 active +#define NVIC_ACTIVE0_INT1 0x00000002 // Interrupt 1 active +#define NVIC_ACTIVE0_INT0 0x00000001 // Interrupt 0 active + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_ACTIVE1 register. +// +//***************************************************************************** +#define NVIC_ACTIVE1_INT59 0x08000000 // Interrupt 59 active +#define NVIC_ACTIVE1_INT58 0x04000000 // Interrupt 58 active +#define NVIC_ACTIVE1_INT57 0x02000000 // Interrupt 57 active +#define NVIC_ACTIVE1_INT56 0x01000000 // Interrupt 56 active +#define NVIC_ACTIVE1_INT55 0x00800000 // Interrupt 55 active +#define NVIC_ACTIVE1_INT54 0x00400000 // Interrupt 54 active +#define NVIC_ACTIVE1_INT53 0x00200000 // Interrupt 53 active +#define NVIC_ACTIVE1_INT52 0x00100000 // Interrupt 52 active +#define NVIC_ACTIVE1_INT51 0x00080000 // Interrupt 51 active +#define NVIC_ACTIVE1_INT50 0x00040000 // Interrupt 50 active +#define NVIC_ACTIVE1_INT49 0x00020000 // Interrupt 49 active +#define NVIC_ACTIVE1_INT48 0x00010000 // Interrupt 48 active +#define NVIC_ACTIVE1_INT47 0x00008000 // Interrupt 47 active +#define NVIC_ACTIVE1_INT46 0x00004000 // Interrupt 46 active +#define NVIC_ACTIVE1_INT45 0x00002000 // Interrupt 45 active +#define NVIC_ACTIVE1_INT44 0x00001000 // Interrupt 44 active +#define NVIC_ACTIVE1_INT43 0x00000800 // Interrupt 43 active +#define NVIC_ACTIVE1_INT42 0x00000400 // Interrupt 42 active +#define NVIC_ACTIVE1_INT41 0x00000200 // Interrupt 41 active +#define NVIC_ACTIVE1_INT40 0x00000100 // Interrupt 40 active +#define NVIC_ACTIVE1_INT39 0x00000080 // Interrupt 39 active +#define NVIC_ACTIVE1_INT38 0x00000040 // Interrupt 38 active +#define NVIC_ACTIVE1_INT37 0x00000020 // Interrupt 37 active +#define NVIC_ACTIVE1_INT36 0x00000010 // Interrupt 36 active +#define NVIC_ACTIVE1_INT35 0x00000008 // Interrupt 35 active +#define NVIC_ACTIVE1_INT34 0x00000004 // Interrupt 34 active +#define NVIC_ACTIVE1_INT33 0x00000002 // Interrupt 33 active +#define NVIC_ACTIVE1_INT32 0x00000001 // Interrupt 32 active + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI0 register. +// +//***************************************************************************** +#define NVIC_PRI0_INT3_M 0xFF000000 // Interrupt 3 priority mask +#define NVIC_PRI0_INT2_M 0x00FF0000 // Interrupt 2 priority mask +#define NVIC_PRI0_INT1_M 0x0000FF00 // Interrupt 1 priority mask +#define NVIC_PRI0_INT0_M 0x000000FF // Interrupt 0 priority mask +#define NVIC_PRI0_INT3_S 24 +#define NVIC_PRI0_INT2_S 16 +#define NVIC_PRI0_INT1_S 8 +#define NVIC_PRI0_INT0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI1 register. +// +//***************************************************************************** +#define NVIC_PRI1_INT7_M 0xFF000000 // Interrupt 7 priority mask +#define NVIC_PRI1_INT6_M 0x00FF0000 // Interrupt 6 priority mask +#define NVIC_PRI1_INT5_M 0x0000FF00 // Interrupt 5 priority mask +#define NVIC_PRI1_INT4_M 0x000000FF // Interrupt 4 priority mask +#define NVIC_PRI1_INT7_S 24 +#define NVIC_PRI1_INT6_S 16 +#define NVIC_PRI1_INT5_S 8 +#define NVIC_PRI1_INT4_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI2 register. +// +//***************************************************************************** +#define NVIC_PRI2_INT11_M 0xFF000000 // Interrupt 11 priority mask +#define NVIC_PRI2_INT10_M 0x00FF0000 // Interrupt 10 priority mask +#define NVIC_PRI2_INT9_M 0x0000FF00 // Interrupt 9 priority mask +#define NVIC_PRI2_INT8_M 0x000000FF // Interrupt 8 priority mask +#define NVIC_PRI2_INT11_S 24 +#define NVIC_PRI2_INT10_S 16 +#define NVIC_PRI2_INT9_S 8 +#define NVIC_PRI2_INT8_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI3 register. +// +//***************************************************************************** +#define NVIC_PRI3_INT15_M 0xFF000000 // Interrupt 15 priority mask +#define NVIC_PRI3_INT14_M 0x00FF0000 // Interrupt 14 priority mask +#define NVIC_PRI3_INT13_M 0x0000FF00 // Interrupt 13 priority mask +#define NVIC_PRI3_INT12_M 0x000000FF // Interrupt 12 priority mask +#define NVIC_PRI3_INT15_S 24 +#define NVIC_PRI3_INT14_S 16 +#define NVIC_PRI3_INT13_S 8 +#define NVIC_PRI3_INT12_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI4 register. +// +//***************************************************************************** +#define NVIC_PRI4_INT19_M 0xFF000000 // Interrupt 19 priority mask +#define NVIC_PRI4_INT18_M 0x00FF0000 // Interrupt 18 priority mask +#define NVIC_PRI4_INT17_M 0x0000FF00 // Interrupt 17 priority mask +#define NVIC_PRI4_INT16_M 0x000000FF // Interrupt 16 priority mask +#define NVIC_PRI4_INT19_S 24 +#define NVIC_PRI4_INT18_S 16 +#define NVIC_PRI4_INT17_S 8 +#define NVIC_PRI4_INT16_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI5 register. +// +//***************************************************************************** +#define NVIC_PRI5_INT23_M 0xFF000000 // Interrupt 23 priority mask +#define NVIC_PRI5_INT22_M 0x00FF0000 // Interrupt 22 priority mask +#define NVIC_PRI5_INT21_M 0x0000FF00 // Interrupt 21 priority mask +#define NVIC_PRI5_INT20_M 0x000000FF // Interrupt 20 priority mask +#define NVIC_PRI5_INT23_S 24 +#define NVIC_PRI5_INT22_S 16 +#define NVIC_PRI5_INT21_S 8 +#define NVIC_PRI5_INT20_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI6 register. +// +//***************************************************************************** +#define NVIC_PRI6_INT27_M 0xFF000000 // Interrupt 27 priority mask +#define NVIC_PRI6_INT26_M 0x00FF0000 // Interrupt 26 priority mask +#define NVIC_PRI6_INT25_M 0x0000FF00 // Interrupt 25 priority mask +#define NVIC_PRI6_INT24_M 0x000000FF // Interrupt 24 priority mask +#define NVIC_PRI6_INT27_S 24 +#define NVIC_PRI6_INT26_S 16 +#define NVIC_PRI6_INT25_S 8 +#define NVIC_PRI6_INT24_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI7 register. +// +//***************************************************************************** +#define NVIC_PRI7_INT31_M 0xFF000000 // Interrupt 31 priority mask +#define NVIC_PRI7_INT30_M 0x00FF0000 // Interrupt 30 priority mask +#define NVIC_PRI7_INT29_M 0x0000FF00 // Interrupt 29 priority mask +#define NVIC_PRI7_INT28_M 0x000000FF // Interrupt 28 priority mask +#define NVIC_PRI7_INT31_S 24 +#define NVIC_PRI7_INT30_S 16 +#define NVIC_PRI7_INT29_S 8 +#define NVIC_PRI7_INT28_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI8 register. +// +//***************************************************************************** +#define NVIC_PRI8_INT35_M 0xFF000000 // Interrupt 35 priority mask +#define NVIC_PRI8_INT34_M 0x00FF0000 // Interrupt 34 priority mask +#define NVIC_PRI8_INT33_M 0x0000FF00 // Interrupt 33 priority mask +#define NVIC_PRI8_INT32_M 0x000000FF // Interrupt 32 priority mask +#define NVIC_PRI8_INT35_S 24 +#define NVIC_PRI8_INT34_S 16 +#define NVIC_PRI8_INT33_S 8 +#define NVIC_PRI8_INT32_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI9 register. +// +//***************************************************************************** +#define NVIC_PRI9_INT39_M 0xFF000000 // Interrupt 39 priority mask +#define NVIC_PRI9_INT38_M 0x00FF0000 // Interrupt 38 priority mask +#define NVIC_PRI9_INT37_M 0x0000FF00 // Interrupt 37 priority mask +#define NVIC_PRI9_INT36_M 0x000000FF // Interrupt 36 priority mask +#define NVIC_PRI9_INT39_S 24 +#define NVIC_PRI9_INT38_S 16 +#define NVIC_PRI9_INT37_S 8 +#define NVIC_PRI9_INT36_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI10 register. +// +//***************************************************************************** +#define NVIC_PRI10_INT43_M 0xFF000000 // Interrupt 43 priority mask +#define NVIC_PRI10_INT42_M 0x00FF0000 // Interrupt 42 priority mask +#define NVIC_PRI10_INT41_M 0x0000FF00 // Interrupt 41 priority mask +#define NVIC_PRI10_INT40_M 0x000000FF // Interrupt 40 priority mask +#define NVIC_PRI10_INT43_S 24 +#define NVIC_PRI10_INT42_S 16 +#define NVIC_PRI10_INT41_S 8 +#define NVIC_PRI10_INT40_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_CPUID register. +// +//***************************************************************************** +#define NVIC_CPUID_IMP_M 0xFF000000 // Implementer +#define NVIC_CPUID_VAR_M 0x00F00000 // Variant +#define NVIC_CPUID_PARTNO_M 0x0000FFF0 // Processor part number +#define NVIC_CPUID_REV_M 0x0000000F // Revision + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_INT_CTRL register. +// +//***************************************************************************** +#define NVIC_INT_CTRL_NMI_SET 0x80000000 // Pend a NMI +#define NVIC_INT_CTRL_PEND_SV 0x10000000 // Pend a PendSV +#define NVIC_INT_CTRL_UNPEND_SV 0x08000000 // Unpend a PendSV +#define NVIC_INT_CTRL_PENDSTSET 0x04000000 // Set pending SysTick interrupt +#define NVIC_INT_CTRL_PENDSTCLR 0x02000000 // Clear pending SysTick interrupt +#define NVIC_INT_CTRL_ISR_PRE 0x00800000 // Debug interrupt handling +#define NVIC_INT_CTRL_ISR_PEND 0x00400000 // Debug interrupt pending +#define NVIC_INT_CTRL_VEC_PEN_M 0x003FF000 // Highest pending exception +#define NVIC_INT_CTRL_RET_BASE 0x00000800 // Return to base +#define NVIC_INT_CTRL_VEC_ACT_M 0x000003FF // Current active exception +#define NVIC_INT_CTRL_VEC_PEN_S 12 +#define NVIC_INT_CTRL_VEC_ACT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_VTABLE register. +// +//***************************************************************************** +#define NVIC_VTABLE_BASE 0x20000000 // Vector table base +#define NVIC_VTABLE_OFFSET_M 0x1FFFFF00 // Vector table offset +#define NVIC_VTABLE_OFFSET_S 8 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_APINT register. +// +//***************************************************************************** +#define NVIC_APINT_VECTKEY_M 0xFFFF0000 // Vector key mask +#define NVIC_APINT_VECTKEY 0x05FA0000 // Vector key +#define NVIC_APINT_ENDIANESS 0x00008000 // Data endianess +#define NVIC_APINT_PRIGROUP_M 0x00000700 // Priority group +#define NVIC_APINT_PRIGROUP_7_1 0x00000000 // Priority group 7.1 split +#define NVIC_APINT_PRIGROUP_6_2 0x00000100 // Priority group 6.2 split +#define NVIC_APINT_PRIGROUP_5_3 0x00000200 // Priority group 5.3 split +#define NVIC_APINT_PRIGROUP_4_4 0x00000300 // Priority group 4.4 split +#define NVIC_APINT_PRIGROUP_3_5 0x00000400 // Priority group 3.5 split +#define NVIC_APINT_PRIGROUP_2_6 0x00000500 // Priority group 2.6 split +#define NVIC_APINT_PRIGROUP_1_7 0x00000600 // Priority group 1.7 split +#define NVIC_APINT_PRIGROUP_0_8 0x00000700 // Priority group 0.8 split +#define NVIC_APINT_SYSRESETREQ 0x00000004 // System reset request +#define NVIC_APINT_VECT_CLR_ACT 0x00000002 // Clear active NMI/fault info +#define NVIC_APINT_VECT_RESET 0x00000001 // System reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_SYS_CTRL register. +// +//***************************************************************************** +#define NVIC_SYS_CTRL_SEVONPEND 0x00000010 // Wakeup on pend +#define NVIC_SYS_CTRL_SLEEPDEEP 0x00000004 // Deep sleep enable +#define NVIC_SYS_CTRL_SLEEPEXIT 0x00000002 // Sleep on ISR exit + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_CFG_CTRL register. +// +//***************************************************************************** +#define NVIC_CFG_CTRL_BFHFNMIGN 0x00000100 // Ignore bus fault in NMI/fault +#define NVIC_CFG_CTRL_DIV0 0x00000010 // Trap on divide by 0 +#define NVIC_CFG_CTRL_UNALIGNED 0x00000008 // Trap on unaligned access +#define NVIC_CFG_CTRL_DEEP_PEND 0x00000004 // Allow deep interrupt trigger +#define NVIC_CFG_CTRL_MAIN_PEND 0x00000002 // Allow main interrupt trigger +#define NVIC_CFG_CTRL_BASE_THR 0x00000001 // Thread state control + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_SYS_PRI1 register. +// +//***************************************************************************** +#define NVIC_SYS_PRI1_RES_M 0xFF000000 // Priority of reserved handler +#define NVIC_SYS_PRI1_USAGE_M 0x00FF0000 // Priority of usage fault handler +#define NVIC_SYS_PRI1_BUS_M 0x0000FF00 // Priority of bus fault handler +#define NVIC_SYS_PRI1_MEM_M 0x000000FF // Priority of mem manage handler +#define NVIC_SYS_PRI1_USAGE_S 16 +#define NVIC_SYS_PRI1_BUS_S 8 +#define NVIC_SYS_PRI1_MEM_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_SYS_PRI2 register. +// +//***************************************************************************** +#define NVIC_SYS_PRI2_SVC_M 0xFF000000 // Priority of SVCall handler +#define NVIC_SYS_PRI2_RES_M 0x00FFFFFF // Priority of reserved handlers +#define NVIC_SYS_PRI2_SVC_S 24 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_SYS_PRI3 register. +// +//***************************************************************************** +#define NVIC_SYS_PRI3_TICK_M 0xFF000000 // Priority of Sys Tick handler +#define NVIC_SYS_PRI3_PENDSV_M 0x00FF0000 // Priority of PendSV handler +#define NVIC_SYS_PRI3_RES_M 0x0000FF00 // Priority of reserved handler +#define NVIC_SYS_PRI3_DEBUG_M 0x000000FF // Priority of debug handler +#define NVIC_SYS_PRI3_TICK_S 24 +#define NVIC_SYS_PRI3_PENDSV_S 16 +#define NVIC_SYS_PRI3_DEBUG_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_SYS_HND_CTRL +// register. +// +//***************************************************************************** +#define NVIC_SYS_HND_CTRL_USAGE 0x00040000 // Usage fault enable +#define NVIC_SYS_HND_CTRL_BUS 0x00020000 // Bus fault enable +#define NVIC_SYS_HND_CTRL_MEM 0x00010000 // Mem manage fault enable +#define NVIC_SYS_HND_CTRL_SVC 0x00008000 // SVCall is pended +#define NVIC_SYS_HND_CTRL_BUSP 0x00004000 // Bus fault is pended +#define NVIC_SYS_HND_CTRL_TICK 0x00000800 // Sys tick is active +#define NVIC_SYS_HND_CTRL_PNDSV 0x00000400 // PendSV is active +#define NVIC_SYS_HND_CTRL_MON 0x00000100 // Monitor is active +#define NVIC_SYS_HND_CTRL_SVCA 0x00000080 // SVCall is active +#define NVIC_SYS_HND_CTRL_USGA 0x00000008 // Usage fault is active +#define NVIC_SYS_HND_CTRL_BUSA 0x00000002 // Bus fault is active +#define NVIC_SYS_HND_CTRL_MEMA 0x00000001 // Mem manage is active + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_FAULT_STAT +// register. +// +//***************************************************************************** +#define NVIC_FAULT_STAT_DIV0 0x02000000 // Divide by zero fault +#define NVIC_FAULT_STAT_UNALIGN 0x01000000 // Unaligned access fault +#define NVIC_FAULT_STAT_NOCP 0x00080000 // No coprocessor fault +#define NVIC_FAULT_STAT_INVPC 0x00040000 // Invalid PC fault +#define NVIC_FAULT_STAT_INVSTAT 0x00020000 // Invalid state fault +#define NVIC_FAULT_STAT_UNDEF 0x00010000 // Undefined instruction fault +#define NVIC_FAULT_STAT_BFARV 0x00008000 // BFAR is valid +#define NVIC_FAULT_STAT_BSTKE 0x00001000 // Stack bus fault +#define NVIC_FAULT_STAT_BUSTKE 0x00000800 // Unstack bus fault +#define NVIC_FAULT_STAT_IMPRE 0x00000400 // Imprecise data bus error +#define NVIC_FAULT_STAT_PRECISE 0x00000200 // Precise data bus error +#define NVIC_FAULT_STAT_IBUS 0x00000100 // Instruction bus fault +#define NVIC_FAULT_STAT_MMARV 0x00000080 // MMAR is valid +#define NVIC_FAULT_STAT_MSTKE 0x00000010 // Stack access violation +#define NVIC_FAULT_STAT_MUSTKE 0x00000008 // Unstack access violation +#define NVIC_FAULT_STAT_DERR 0x00000002 // Data access violation +#define NVIC_FAULT_STAT_IERR 0x00000001 // Instruction access violation + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_HFAULT_STAT +// register. +// +//***************************************************************************** +#define NVIC_HFAULT_STAT_DBG 0x80000000 // Debug event +#define NVIC_HFAULT_STAT_FORCED 0x40000000 // Cannot execute fault handler +#define NVIC_HFAULT_STAT_VECT 0x00000002 // Vector table read fault + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_DEBUG_STAT +// register. +// +//***************************************************************************** +#define NVIC_DEBUG_STAT_EXTRNL 0x00000010 // EDBGRQ asserted +#define NVIC_DEBUG_STAT_VCATCH 0x00000008 // Vector catch +#define NVIC_DEBUG_STAT_DWTTRAP 0x00000004 // DWT match +#define NVIC_DEBUG_STAT_BKPT 0x00000002 // Breakpoint instruction +#define NVIC_DEBUG_STAT_HALTED 0x00000001 // Halt request + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_MM_ADDR register. +// +//***************************************************************************** +#define NVIC_MM_ADDR_M 0xFFFFFFFF // Data fault address +#define NVIC_MM_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_FAULT_ADDR +// register. +// +//***************************************************************************** +#define NVIC_FAULT_ADDR_M 0xFFFFFFFF // Data bus fault address +#define NVIC_FAULT_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_MPU_TYPE register. +// +//***************************************************************************** +#define NVIC_MPU_TYPE_IREGION_M 0x00FF0000 // Number of I regions +#define NVIC_MPU_TYPE_DREGION_M 0x0000FF00 // Number of D regions +#define NVIC_MPU_TYPE_SEPARATE 0x00000001 // Separate or unified MPU +#define NVIC_MPU_TYPE_IREGION_S 16 +#define NVIC_MPU_TYPE_DREGION_S 8 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_MPU_CTRL register. +// +//***************************************************************************** +#define NVIC_MPU_CTRL_PRIVDEFEN 0x00000004 // MPU default region in priv mode +#define NVIC_MPU_CTRL_HFNMIENA 0x00000002 // MPU enabled during faults +#define NVIC_MPU_CTRL_ENABLE 0x00000001 // MPU enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_MPU_NUMBER +// register. +// +//***************************************************************************** +#define NVIC_MPU_NUMBER_M 0x000000FF // MPU region to access +#define NVIC_MPU_NUMBER_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_MPU_BASE register. +// +//***************************************************************************** +#define NVIC_MPU_BASE_ADDR_M 0xFFFFFFE0 // Base address mask +#define NVIC_MPU_BASE_VALID 0x00000010 // Region number valid +#define NVIC_MPU_BASE_REGION_M 0x0000000F // Region number +#define NVIC_MPU_BASE_ADDR_S 8 +#define NVIC_MPU_BASE_REGION_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_MPU_ATTR register. +// +//***************************************************************************** +#define NVIC_MPU_ATTR_M 0xFFFF0000 // Attributes +#define NVIC_MPU_ATTR_AP_NO_NO 0x00000000 // prv: no access, usr: no access +#define NVIC_MPU_ATTR_BUFFRABLE 0x00010000 // Bufferable +#define NVIC_MPU_ATTR_CACHEABLE 0x00020000 // Cacheable +#define NVIC_MPU_ATTR_SHAREABLE 0x00040000 // Shareable +#define NVIC_MPU_ATTR_TEX_M 0x00380000 // Type extension mask +#define NVIC_MPU_ATTR_AP_RW_NO 0x01000000 // prv: rw, usr: none +#define NVIC_MPU_ATTR_AP_RW_RO 0x02000000 // prv: rw, usr: read-only +#define NVIC_MPU_ATTR_AP_RW_RW 0x03000000 // prv: rw, usr: rw +#define NVIC_MPU_ATTR_AP_RO_NO 0x05000000 // prv: ro, usr: none +#define NVIC_MPU_ATTR_AP_RO_RO 0x06000000 // prv: ro, usr: ro +#define NVIC_MPU_ATTR_AP_M 0x07000000 // Access permissions mask +#define NVIC_MPU_ATTR_XN 0x10000000 // Execute disable +#define NVIC_MPU_ATTR_SRD_M 0x0000FF00 // Sub-region disable mask +#define NVIC_MPU_ATTR_SRD_0 0x00000100 // Sub-region 0 disable +#define NVIC_MPU_ATTR_SRD_1 0x00000200 // Sub-region 1 disable +#define NVIC_MPU_ATTR_SRD_2 0x00000400 // Sub-region 2 disable +#define NVIC_MPU_ATTR_SRD_3 0x00000800 // Sub-region 3 disable +#define NVIC_MPU_ATTR_SRD_4 0x00001000 // Sub-region 4 disable +#define NVIC_MPU_ATTR_SRD_5 0x00002000 // Sub-region 5 disable +#define NVIC_MPU_ATTR_SRD_6 0x00004000 // Sub-region 6 disable +#define NVIC_MPU_ATTR_SRD_7 0x00008000 // Sub-region 7 disable +#define NVIC_MPU_ATTR_SIZE_M 0x0000003E // Region size mask +#define NVIC_MPU_ATTR_SIZE_32B 0x00000008 // Region size 32 bytes +#define NVIC_MPU_ATTR_SIZE_64B 0x0000000A // Region size 64 bytes +#define NVIC_MPU_ATTR_SIZE_128B 0x0000000C // Region size 128 bytes +#define NVIC_MPU_ATTR_SIZE_256B 0x0000000E // Region size 256 bytes +#define NVIC_MPU_ATTR_SIZE_512B 0x00000010 // Region size 512 bytes +#define NVIC_MPU_ATTR_SIZE_1K 0x00000012 // Region size 1 Kbytes +#define NVIC_MPU_ATTR_SIZE_2K 0x00000014 // Region size 2 Kbytes +#define NVIC_MPU_ATTR_SIZE_4K 0x00000016 // Region size 4 Kbytes +#define NVIC_MPU_ATTR_SIZE_8K 0x00000018 // Region size 8 Kbytes +#define NVIC_MPU_ATTR_SIZE_16K 0x0000001A // Region size 16 Kbytes +#define NVIC_MPU_ATTR_SIZE_32K 0x0000001C // Region size 32 Kbytes +#define NVIC_MPU_ATTR_SIZE_64K 0x0000001E // Region size 64 Kbytes +#define NVIC_MPU_ATTR_SIZE_128K 0x00000020 // Region size 128 Kbytes +#define NVIC_MPU_ATTR_SIZE_256K 0x00000022 // Region size 256 Kbytes +#define NVIC_MPU_ATTR_SIZE_512K 0x00000024 // Region size 512 Kbytes +#define NVIC_MPU_ATTR_SIZE_1M 0x00000026 // Region size 1 Mbytes +#define NVIC_MPU_ATTR_SIZE_2M 0x00000028 // Region size 2 Mbytes +#define NVIC_MPU_ATTR_SIZE_4M 0x0000002A // Region size 4 Mbytes +#define NVIC_MPU_ATTR_SIZE_8M 0x0000002C // Region size 8 Mbytes +#define NVIC_MPU_ATTR_SIZE_16M 0x0000002E // Region size 16 Mbytes +#define NVIC_MPU_ATTR_SIZE_32M 0x00000030 // Region size 32 Mbytes +#define NVIC_MPU_ATTR_SIZE_64M 0x00000032 // Region size 64 Mbytes +#define NVIC_MPU_ATTR_SIZE_128M 0x00000034 // Region size 128 Mbytes +#define NVIC_MPU_ATTR_SIZE_256M 0x00000036 // Region size 256 Mbytes +#define NVIC_MPU_ATTR_SIZE_512M 0x00000038 // Region size 512 Mbytes +#define NVIC_MPU_ATTR_SIZE_1G 0x0000003A // Region size 1 Gbytes +#define NVIC_MPU_ATTR_SIZE_2G 0x0000003C // Region size 2 Gbytes +#define NVIC_MPU_ATTR_SIZE_4G 0x0000003E // Region size 4 Gbytes +#define NVIC_MPU_ATTR_ENABLE 0x00000001 // Region enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_DBG_CTRL register. +// +//***************************************************************************** +#define NVIC_DBG_CTRL_DBGKEY_M 0xFFFF0000 // Debug key mask +#define NVIC_DBG_CTRL_DBGKEY 0xA05F0000 // Debug key +#define NVIC_DBG_CTRL_S_RESET_ST \ + 0x02000000 // Core has reset since last read +#define NVIC_DBG_CTRL_S_RETIRE_ST \ + 0x01000000 // Core has executed insruction + // since last read +#define NVIC_DBG_CTRL_S_LOCKUP 0x00080000 // Core is locked up +#define NVIC_DBG_CTRL_S_SLEEP 0x00040000 // Core is sleeping +#define NVIC_DBG_CTRL_S_HALT 0x00020000 // Core status on halt +#define NVIC_DBG_CTRL_S_REGRDY 0x00010000 // Register read/write available +#define NVIC_DBG_CTRL_C_SNAPSTALL \ + 0x00000020 // Breaks a stalled load/store +#define NVIC_DBG_CTRL_C_MASKINT 0x00000008 // Mask interrupts when stepping +#define NVIC_DBG_CTRL_C_STEP 0x00000004 // Step the core +#define NVIC_DBG_CTRL_C_HALT 0x00000002 // Halt the core +#define NVIC_DBG_CTRL_C_DEBUGEN 0x00000001 // Enable debug + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_DBG_XFER register. +// +//***************************************************************************** +#define NVIC_DBG_XFER_REG_WNR 0x00010000 // Write or not read +#define NVIC_DBG_XFER_REG_SEL_M 0x0000001F // Register +#define NVIC_DBG_XFER_REG_R0 0x00000000 // Register R0 +#define NVIC_DBG_XFER_REG_R1 0x00000001 // Register R1 +#define NVIC_DBG_XFER_REG_R2 0x00000002 // Register R2 +#define NVIC_DBG_XFER_REG_R3 0x00000003 // Register R3 +#define NVIC_DBG_XFER_REG_R4 0x00000004 // Register R4 +#define NVIC_DBG_XFER_REG_R5 0x00000005 // Register R5 +#define NVIC_DBG_XFER_REG_R6 0x00000006 // Register R6 +#define NVIC_DBG_XFER_REG_R7 0x00000007 // Register R7 +#define NVIC_DBG_XFER_REG_R8 0x00000008 // Register R8 +#define NVIC_DBG_XFER_REG_R9 0x00000009 // Register R9 +#define NVIC_DBG_XFER_REG_R10 0x0000000A // Register R10 +#define NVIC_DBG_XFER_REG_R11 0x0000000B // Register R11 +#define NVIC_DBG_XFER_REG_R12 0x0000000C // Register R12 +#define NVIC_DBG_XFER_REG_R13 0x0000000D // Register R13 +#define NVIC_DBG_XFER_REG_R14 0x0000000E // Register R14 +#define NVIC_DBG_XFER_REG_R15 0x0000000F // Register R15 +#define NVIC_DBG_XFER_REG_FLAGS 0x00000010 // xPSR/Flags register +#define NVIC_DBG_XFER_REG_MSP 0x00000011 // Main SP +#define NVIC_DBG_XFER_REG_PSP 0x00000012 // Process SP +#define NVIC_DBG_XFER_REG_DSP 0x00000013 // Deep SP +#define NVIC_DBG_XFER_REG_CFBP 0x00000014 // Control/Fault/BasePri/PriMask + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_DBG_DATA register. +// +//***************************************************************************** +#define NVIC_DBG_DATA_M 0xFFFFFFFF // Data temporary cache +#define NVIC_DBG_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_DBG_INT register. +// +//***************************************************************************** +#define NVIC_DBG_INT_HARDERR 0x00000400 // Debug trap on hard fault +#define NVIC_DBG_INT_INTERR 0x00000200 // Debug trap on interrupt errors +#define NVIC_DBG_INT_BUSERR 0x00000100 // Debug trap on bus error +#define NVIC_DBG_INT_STATERR 0x00000080 // Debug trap on usage fault state +#define NVIC_DBG_INT_CHKERR 0x00000040 // Debug trap on usage fault check +#define NVIC_DBG_INT_NOCPERR 0x00000020 // Debug trap on coprocessor error +#define NVIC_DBG_INT_MMERR 0x00000010 // Debug trap on mem manage fault +#define NVIC_DBG_INT_RESET 0x00000008 // Core reset status +#define NVIC_DBG_INT_RSTPENDCLR 0x00000004 // Clear pending core reset +#define NVIC_DBG_INT_RSTPENDING 0x00000002 // Core reset is pending +#define NVIC_DBG_INT_RSTVCATCH 0x00000001 // Reset vector catch + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_SW_TRIG register. +// +//***************************************************************************** +#define NVIC_SW_TRIG_INTID_M 0x000003FF // Interrupt to trigger +#define NVIC_SW_TRIG_INTID_S 0 + +//***************************************************************************** +// +// The following definitions are deprecated. +// +//***************************************************************************** +#ifndef DEPRECATED + +//***************************************************************************** +// +// Deprecated defines for the Watchdog +// +//***************************************************************************** +#define WATCHDOG_LOAD_R (*((volatile unsigned long *)0x40000000)) +#define WATCHDOG_VALUE_R (*((volatile unsigned long *)0x40000004)) +#define WATCHDOG_CTL_R (*((volatile unsigned long *)0x40000008)) +#define WATCHDOG_ICR_R (*((volatile unsigned long *)0x4000000C)) +#define WATCHDOG_RIS_R (*((volatile unsigned long *)0x40000010)) +#define WATCHDOG_MIS_R (*((volatile unsigned long *)0x40000014)) +#define WATCHDOG_TEST_R (*((volatile unsigned long *)0x40000418)) +#define WATCHDOG_LOCK_R (*((volatile unsigned long *)0x40000C00)) + +//***************************************************************************** +// +// Deprecated defines for the bit fields in the I2C_O_SICR register. +// +//***************************************************************************** +#define I2C_SICR_IC 0x00000001 // Clear Interrupt + +//***************************************************************************** +// +// Deprecated defines for the bit fields in the I2C_O_SMIS register. +// +//***************************************************************************** +#define I2C_SMIS_MIS 0x00000001 // Masked Interrupt Status + +//***************************************************************************** +// +// Deprecated defines for the bit fields in the I2C_O_SRIS register. +// +//***************************************************************************** +#define I2C_SRIS_RIS 0x00000001 // Raw Interrupt Status + +//***************************************************************************** +// +// Deprecated defines for the bit fields in the I2C_O_SIMR register. +// +//***************************************************************************** +#define I2C_SIMR_IM 0x00000001 // Interrupt Mask + +//***************************************************************************** +// +// Deprecated defines for the bit fields in the the interpretation of the data +// in the SSFIFOx when the ADC TMLB is enabled. register. +// +//***************************************************************************** +#define ADC_TMLB_CNT_M 0x000003C0 // Continuous Sample Counter +#define ADC_TMLB_CONT 0x00000020 // Continuation Sample Indicator +#define ADC_TMLB_DIFF 0x00000010 // Differential Sample Indicator +#define ADC_TMLB_TS 0x00000008 // Temp Sensor Sample Indicator +#define ADC_TMLB_MUX_M 0x00000007 // Analog Input Indicator +#define ADC_TMLB_CNT_S 6 // Sample counter shift +#define ADC_TMLB_MUX_S 0 // Input channel number shift + +//***************************************************************************** +// +// Deprecated defines for the ADC register offsets. +// +//***************************************************************************** +#define ADC_ACTSS_R (*((volatile unsigned long *)0x40038000)) +#define ADC_RIS_R (*((volatile unsigned long *)0x40038004)) +#define ADC_IM_R (*((volatile unsigned long *)0x40038008)) +#define ADC_ISC_R (*((volatile unsigned long *)0x4003800C)) +#define ADC_OSTAT_R (*((volatile unsigned long *)0x40038010)) +#define ADC_EMUX_R (*((volatile unsigned long *)0x40038014)) +#define ADC_USTAT_R (*((volatile unsigned long *)0x40038018)) +#define ADC_SSPRI_R (*((volatile unsigned long *)0x40038020)) +#define ADC_PSSI_R (*((volatile unsigned long *)0x40038028)) +#define ADC_SAC_R (*((volatile unsigned long *)0x40038030)) +#define ADC_SSMUX0_R (*((volatile unsigned long *)0x40038040)) +#define ADC_SSCTL0_R (*((volatile unsigned long *)0x40038044)) +#define ADC_SSFIFO0_R (*((volatile unsigned long *)0x40038048)) +#define ADC_SSFSTAT0_R (*((volatile unsigned long *)0x4003804C)) +#define ADC_SSMUX1_R (*((volatile unsigned long *)0x40038060)) +#define ADC_SSCTL1_R (*((volatile unsigned long *)0x40038064)) +#define ADC_SSFIFO1_R (*((volatile unsigned long *)0x40038068)) +#define ADC_SSFSTAT1_R (*((volatile unsigned long *)0x4003806C)) +#define ADC_SSMUX2_R (*((volatile unsigned long *)0x40038080)) +#define ADC_SSCTL2_R (*((volatile unsigned long *)0x40038084)) +#define ADC_SSFIFO2_R (*((volatile unsigned long *)0x40038088)) +#define ADC_SSFSTAT2_R (*((volatile unsigned long *)0x4003808C)) +#define ADC_SSMUX3_R (*((volatile unsigned long *)0x400380A0)) +#define ADC_SSCTL3_R (*((volatile unsigned long *)0x400380A4)) +#define ADC_SSFIFO3_R (*((volatile unsigned long *)0x400380A8)) +#define ADC_SSFSTAT3_R (*((volatile unsigned long *)0x400380AC)) +#define ADC_TMLB_R (*((volatile unsigned long *)0x40038100)) + +//***************************************************************************** +// +// Deprecated defines for the bit fields in the FLASH_FMC register. +// +//***************************************************************************** +#define FLASH_FMC_WRKEY_M 0xFFFF0000 // Flash Memory Write Key +#define FLASH_FMC_WRKEY_S 16 + +//***************************************************************************** +// +// Deprecated defines for the bit fields in the SYSCTL_DID1 register. +// +//***************************************************************************** +#define SYSCTL_DID1_PKG_28SOIC 0x00000000 // SOIC package +#define SYSCTL_DID1_PKG_48QFP 0x00000008 // QFP package + +//***************************************************************************** +// +// Deprecated defines for the NVIC register addresses. +// +//***************************************************************************** +#define NVIC_MPU_R (*((volatile unsigned long *)0xE000ED9C)) + +#endif + +#endif // __LM3S8962_H__ diff --git a/bsp/lm3s_9b9x/SConscript b/bsp/lm3s_9b9x/SConscript new file mode 100644 index 0000000000000000000000000000000000000000..c48296330ce3a949a1d5cdc0656e666f5c92c0db --- /dev/null +++ b/bsp/lm3s_9b9x/SConscript @@ -0,0 +1,19 @@ +import rtconfig +Import('RTT_ROOT') +from building import * + +src_bsp = ['application.c', 'startup.c', 'board.c'] + +src_drv = [] +if GetDepend('RT_USING_DFS'): + src_drv += ['sdcard.c'] + +if GetDepend('RT_USING_LWIP'): + + src_drv += ['luminaryif.c'] + +src = File(src_bsp + src_drv) +CPPPATH = [RTT_ROOT + '/bsp/lm3s'] +group = DefineGroup('Startup', src, depend = [''], CPPPATH = CPPPATH) + +Return('group') diff --git a/bsp/lm3s_9b9x/SConstruct b/bsp/lm3s_9b9x/SConstruct new file mode 100644 index 0000000000000000000000000000000000000000..e8b767275d7372fb0c2cf461bfa2c8154db054c6 --- /dev/null +++ b/bsp/lm3s_9b9x/SConstruct @@ -0,0 +1,29 @@ +import os +import sys +import rtconfig + +RTT_ROOT = os.path.normpath(os.getcwd() + '/../..') +sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')] +from building import * + +TARGET = 'rtthread-lm3s.' + rtconfig.TARGET_EXT + +env = Environment(tools = ['mingw'], + AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS, + CC = rtconfig.CC, CCFLAGS = rtconfig.CFLAGS, + AR = rtconfig.AR, ARFLAGS = '-rc', + LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS) +env.PrependENVPath('PATH', rtconfig.EXEC_PATH) + +Export('RTT_ROOT') +Export('rtconfig') + +# prepare building environment +objs = PrepareBuilding(env, RTT_ROOT) + +objs = objs + SConscript(('bsp/lm3s/Libraries/SConscript'), variant_dir='build/bsp/Libraries', duplicate=0) + +env.Program(TARGET, objs) + +# end building +EndBuilding(TARGET) diff --git a/bsp/lm3s_9b9x/application.c b/bsp/lm3s_9b9x/application.c new file mode 100644 index 0000000000000000000000000000000000000000..fded03279f1b575db179235b75d2924ef3cb751a --- /dev/null +++ b/bsp/lm3s_9b9x/application.c @@ -0,0 +1,83 @@ +/* + * File : app.c + * This file is part of RT-Thread RTOS + * COPYRIGHT (C) 2006, RT-Thread Development Team + * + * The license and distribution terms for this file may be + * found in the file LICENSE in this distribution or at + * http://openlab.rt-thread.com/license/LICENSE + * + * Change Logs: + * Date Author Notes + * 2009-01-05 Bernard the first version + */ + +/** + * @addtogroup LM3S + */ +/*@{*/ + +#include +#include + +#ifdef RT_USING_DFS +/* dfs init */ +#include +/* dfs filesystem:ELM FatFs filesystem init */ +#include +/* dfs Filesystem APIs */ +#include +#endif + +#ifdef RT_USING_LWIP +#include +#include +#endif + +/* thread phase init */ +void rt_init_thread_entry(void *parameter) +{ +/* Filesystem Initialization */ +#ifdef RT_USING_DFS + { + /* init the device filesystem */ + dfs_init(); +#ifdef RT_USING_DFS_ELMFAT + /* init the elm chan FatFs filesystam*/ + elm_init(); + + /* mount sd card fat partition 1 as root directory */ + if (dfs_mount("sd0", "/", "elm", 0, 0) == 0) + { + rt_kprintf("File System initialized!\n"); + } + else + rt_kprintf("File System initialzation failed!\n"); +#endif + } +#endif + +/* LwIP Initialization */ +#ifdef RT_USING_LWIP + { + extern void lwip_sys_init(void); + + /* init lwip system */ + lwip_sys_init(); + rt_kprintf("TCP/IP initialized!\n"); + } +#endif +} + +int rt_application_init() +{ + rt_thread_t init_thread; + + init_thread = rt_thread_create("init", + rt_init_thread_entry, RT_NULL, + 1024, 21, 20); + rt_thread_startup(init_thread); + + return 0; +} +/*@}*/ diff --git a/bsp/lm3s_9b9x/board.c b/bsp/lm3s_9b9x/board.c new file mode 100644 index 0000000000000000000000000000000000000000..56fa83f89b6b49aa5c904c177cf43345ea246b67 --- /dev/null +++ b/bsp/lm3s_9b9x/board.c @@ -0,0 +1,132 @@ +/* + * File : board.c + * This file is part of RT-Thread RTOS + * COPYRIGHT (C) 2006 - 2009 RT-Thread Develop Team + * + * The license and distribution terms for this file may be + * found in the file LICENSE in this distribution or at + * http://openlab.rt-thread.com/license/LICENSE + * + * Change Logs: + * Date Author Notes + * 2009-05-16 Bernard first implementation + */ + +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + + +static void rt_hw_console_init(void); + +/** + * @addtogroup LM3S + */ + +/*@{*/ + +extern void rt_hw_interrupt_thread_switch(void); +/** + * This is the timer interrupt service routine. + * + */ +void rt_hw_timer_handler(void) +{ + /* enter interrupt */ + rt_interrupt_enter(); + + rt_tick_increase(); + + /* leave interrupt */ + rt_interrupt_leave(); + rt_hw_interrupt_thread_switch(); +} + +/** + * This is the ethernet interrupt service routine. + * + */ +void rt_hw_eth_handler(void) +{ +#ifdef RT_USING_LWIP + /* luminary ethernet interface */ + extern void luminaryif_isr(void); + luminaryif_isr(); +#endif +} + +/** + * This function will initial LM3S board. + */ +void rt_hw_board_init() +{ + /* set ldo */ + SysCtlLDOSet(SYSCTL_LDO_2_50V); + /* set clock */ + SysCtlClockSet(SYSCTL_SYSDIV_4 | SYSCTL_USE_PLL | SYSCTL_OSC_MAIN | + LM3S_XTAL_TYPE); + + /* init systick */ + SysTickDisable(); + SysTickPeriodSet(SysCtlClockGet()/RT_TICK_PER_SECOND); + SysTickIntEnable(); + SysTickEnable(); + + /* enable ssio */ + SysCtlPeripheralEnable(SYSCTL_PERIPH_SSI0); + + /* init console */ + rt_hw_console_init(); + + /* enable interrupt */ + IntMasterEnable(); +} + +/* init console to support rt_kprintf */ +static void rt_hw_console_init() +{ + /* Enable the UART0 peripherals */ + SysCtlPeripheralEnable(SYSCTL_PERIPH_UART0); + SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOA); + + /* Set GPIO A0 and A1 as UART pins. */ + GPIOPinTypeUART(GPIO_PORTA_BASE, GPIO_PIN_0 | GPIO_PIN_1); + + /* Configure the UART for 115,200, 8-N-1 operation. */ + UARTConfigSetExpClk(UART0_BASE, SysCtlClockGet(), 115200, + (UART_CONFIG_WLEN_8 | UART_CONFIG_STOP_ONE | + UART_CONFIG_PAR_NONE)); +} + +/* write one character to serial, must not trigger interrupt */ +static void rt_hw_console_putc(const char c) +{ + if (c == '\n') + while(UARTCharPutNonBlocking(UART0_BASE, '\r') == false); + + while(UARTCharPutNonBlocking(UART0_BASE, c) == false); +} + +/** + * This function is used by rt_kprintf to display a string on console. + * + * @param str the displayed string + */ +void rt_hw_console_output(const char* str) +{ + while (*str) + { + rt_hw_console_putc (*str++); + } +} + +/*@}*/ diff --git a/bsp/lm3s_9b9x/board.h b/bsp/lm3s_9b9x/board.h new file mode 100644 index 0000000000000000000000000000000000000000..f33af86d26ee8145361f81232506c1a3b8556318 --- /dev/null +++ b/bsp/lm3s_9b9x/board.h @@ -0,0 +1,35 @@ +/* + * File : board.h + * This file is part of RT-Thread RTOS + * COPYRIGHT (C) 2006, RT-Thread Develop Team + * + * The license and distribution terms for this file may be + * found in the file LICENSE in this distribution or at + * http://openlab.rt-thread.com/license/LICENSE + * + * Change Logs: + * Date Author Notes + * 2006-10-08 Bernard add board.h to this bsp + * 2009-12-25 yi.qiu add LM3S configration + */ + +// <<< Use Configuration Wizard in Context Menu >>> +#ifndef __BOARD_H__ +#define __BOARD_H__ + +// Internal SRAM memory size[Kbytes] <8-64> +// Default: 64 +#define LM3S_SRAM_SIZE 64 +#define LM3S_SRAM_END (0x20000000 + LM3S_SRAM_SIZE * 1024) + +// For lm3s8962, it should be SYSCTL_XTAL_8MHZ +#define LM3S_XTAL_TYPE SYSCTL_XTAL_8MHZ + +void rt_hw_board_led_on(int n); +void rt_hw_board_led_off(int n); +void rt_hw_board_init(void); + +void rt_hw_usart_init(void); +void rt_hw_sdcard_init(void); + +#endif diff --git a/bsp/lm3s_9b9x/lm3s_rom.ld b/bsp/lm3s_9b9x/lm3s_rom.ld new file mode 100644 index 0000000000000000000000000000000000000000..7bc230a5cfacdca9f08d014fd1aa49378123fd05 --- /dev/null +++ b/bsp/lm3s_9b9x/lm3s_rom.ld @@ -0,0 +1,123 @@ +/* + * linker script for LM3S with GNU ld + * yi.qiu 2009-12-26 modified from Bernard's stm32 version + */ + +/* Program Entry, set to mark it as "used" and avoid gc */ +MEMORY +{ + CODE (rx) : ORIGIN = 0x00000000, LENGTH = 0x00040000 + DATA (rw) : ORIGIN = 0x20000000, LENGTH = 0x00010000 +} +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + *(.text) /* remaining code */ + *(.text.*) /* remaining code */ + *(.rodata) /* read-only data (constants) */ + *(.rodata*) + *(.glue_7) + *(.glue_7t) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* section information for finsh shell */ + . = ALIGN(4); + __fsymtab_start = .; + KEEP(*(FSymTab)) + __fsymtab_end = .; + . = ALIGN(4); + __vsymtab_start = .; + KEEP(*(VSymTab)) + __vsymtab_end = .; + . = ALIGN(4); + + _etext = .; + } > CODE = 0 + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + + /* This is used by the startup in order to initialize the .data secion */ + _sidata = .; + } > CODE + __exidx_end = .; + + /* .data section which is used for initialized data */ + .data : AT (_sidata) + { + . = ALIGN(4); + /* This is used by the startup in order to initialize the .data secion */ + _sdata = . ; + + *(.data) + *(.data.*) + + . = ALIGN(4); + /* This is used by the startup in order to initialize the .data secion */ + _edata = . ; + } >DATA + + __bss_start = .; + .bss : + { + . = ALIGN(4); + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; + + *(.bss) + *(COMMON) + + . = ALIGN(4); + /* This is used by the startup in order to initialize the .bss secion */ + _ebss = . ; + _estack = .; + + *(.bss.init) + } > DATA + __bss_end = .; + + _end = .; + + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + /* DWARF debug sections. + * Symbols in the DWARF debugging sections are relative to the beginning + * of the section so we begin them at 0. */ + /* DWARF 1 */ + .debug 0 : { *(.debug) } + .line 0 : { *(.line) } + /* GNU DWARF 1 extensions */ + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_sfnames 0 : { *(.debug_sfnames) } + /* DWARF 1.1 and DWARF 2 */ + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + /* DWARF 2 */ + .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } + .debug_str 0 : { *(.debug_str) } + .debug_loc 0 : { *(.debug_loc) } + .debug_macinfo 0 : { *(.debug_macinfo) } + /* SGI/MIPS DWARF 2 extensions */ + .debug_weaknames 0 : { *(.debug_weaknames) } + .debug_funcnames 0 : { *(.debug_funcnames) } + .debug_typenames 0 : { *(.debug_typenames) } + .debug_varnames 0 : { *(.debug_varnames) } +} diff --git a/bsp/lm3s_9b9x/lm3s_rom.sct b/bsp/lm3s_9b9x/lm3s_rom.sct new file mode 100644 index 0000000000000000000000000000000000000000..79a39c72e88ff4e7eda1f6f9af4ae8eb477a6f6d --- /dev/null +++ b/bsp/lm3s_9b9x/lm3s_rom.sct @@ -0,0 +1,15 @@ +; ************************************************************* +; *** Scatter-Loading Description File generated by uVision *** +; ************************************************************* + +LR_IROM1 0x00000000 0x00040000 { ; load region size_region + ER_IROM1 0x00000000 0x00040000 { ; load address = execution address + *.o (RESET, +First) + *(InRoot$$Sections) + .ANY (+RO) + } + RW_IRAM1 0x20000000 0x00010000 { ; RW data + .ANY (+RW +ZI) + } +} + diff --git a/bsp/lm3s_9b9x/luminaryif.c b/bsp/lm3s_9b9x/luminaryif.c new file mode 100644 index 0000000000000000000000000000000000000000..603805917982debe772dbc23f22aff753721312a --- /dev/null +++ b/bsp/lm3s_9b9x/luminaryif.c @@ -0,0 +1,489 @@ +//***************************************************************************** +// +// luminaryif.c - Ethernet Interface File for lwIP TCP/IP Stack +// +//***************************************************************************** + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include "lwipopts.h" +#include "luminaryif.h" + +#define MAX_ADDR_LEN 6 + +struct net_device +{ + /* inherit from ethernet device */ + struct eth_device parent; + + /* interface address info. */ + rt_uint8_t dev_addr[MAX_ADDR_LEN]; /* hw address */ +}; + +static struct net_device luminaryif_dev_entry; +static struct net_device *luminaryif_dev =&luminaryif_dev_entry; +static struct rt_semaphore tx_sem; + +//***************************************************************************** +// +// Sanity Check: This module will NOT work if the following defines +// are incorrect. +// +//***************************************************************************** +#if (PBUF_LINK_HLEN != 16) +#error "Incorrect PBUF_LINK_HLEN specified!" +#endif +#if (ETH_PAD_SIZE != 2) +#error "Incorrect ETH_PAD_SIZE specified!" +#endif +#if (PBUF_POOL_BUFSIZE % 4) +#error "PBUF_POOL_BUFSIZE must be modulo 4!" +#endif + +/* RT-Thread Device Interface */ + +/* initialize the interface */ +//***************************************************************************** +// +// Low-Level initialization function for the Ethernet Controller. +// +//***************************************************************************** +rt_err_t luminaryif_init(rt_device_t dev) +{ + unsigned long ulTemp; + + // + // Disable all Ethernet Interrupts. + // + EthernetIntDisable(ETH_BASE, (ETH_INT_PHY | ETH_INT_MDIO | ETH_INT_RXER | + ETH_INT_RXOF | ETH_INT_TX | ETH_INT_TXER | + ETH_INT_RX)); + ulTemp = EthernetIntStatus(ETH_BASE, false); + EthernetIntClear(ETH_BASE, ulTemp); + + // + // Initialize the Ethernet Controller. + // + EthernetInitExpClk(ETH_BASE, SysCtlClockGet()); + + // + // Configure the Ethernet Controller for normal operation. + // - Enable TX Duplex Mode + // - Enable TX Padding + // - Enable TX CRC Generation + // + EthernetConfigSet(ETH_BASE, (ETH_CFG_TX_DPLXEN | + ETH_CFG_TX_CRCEN | ETH_CFG_TX_PADEN)); + + // + // Enable the Ethernet Controller transmitter and receiver. + // + EthernetEnable(ETH_BASE); + + // + // Enable the Ethernet Interrupt handler. + // + IntEnable(INT_ETH); + + // + // Enable Ethernet TX and RX Packet Interrupts. + // + EthernetIntEnable(ETH_BASE, ETH_INT_RX | ETH_INT_TX); + + return RT_EOK; +} + +void luminaryif_isr(void) +{ + unsigned long ulTemp; + + // + // Read and Clear the interrupt. + // + ulTemp = EthernetIntStatus(ETH_BASE, false); + EthernetIntClear(ETH_BASE, ulTemp); + + // + // Check to see if an RX Interrupt has occured. + // + if(ulTemp & ETH_INT_RX) + { + // + // Indicate that a packet has been received. + // + rt_err_t result; + + /* a frame has been received */ + result = eth_device_ready((struct eth_device*)&(luminaryif_dev->parent)); + + if(result != RT_EOK) rt_set_errno(-RT_ERROR); + + // + // Disable Ethernet RX Interrupt. + // + EthernetIntDisable(ETH_BASE, ETH_INT_RX); + } + if(ulTemp & ETH_INT_TX) + { + /* A frame has been transmitted. */ + rt_sem_release(&tx_sem); + } + +} + +/* control the interface */ +rt_err_t luminaryif_control(rt_device_t dev, rt_uint8_t cmd, void *args) +{ + switch(cmd) + { + case NIOCTL_GADDR: + /* get mac address */ + if(args) rt_memcpy(args, luminaryif_dev_entry.dev_addr, 6); + else return -RT_ERROR; + break; + + default : + break; + } + + return RT_EOK; +} + +/* Open the ethernet interface */ +rt_err_t luminaryif_open(rt_device_t dev, rt_uint16_t oflag) +{ + return RT_EOK; +} + +/* Close the interface */ +rt_err_t luminaryif_close(rt_device_t dev) +{ + return RT_EOK; +} + +/* Read */ +rt_size_t luminaryif_read(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size) +{ + rt_set_errno(-RT_ENOSYS); + return 0; +} + +/* Write */ +rt_size_t luminaryif_write(rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size) +{ + rt_set_errno(-RT_ENOSYS); + return 0; +} + +//**************************************************************************** +// +// Low-Level transmit routine. Should do the actual transmission of the +// packet. The packet is contained in the pbuf that is passed to the function. +// This pbuf might be chained. +// +//**************************************************************************** +rt_err_t luminaryif_tx(rt_device_t dev, struct pbuf *p) +{ + int iBuf; + unsigned char *pucBuf; + unsigned long *pulBuf; + struct pbuf *q; + int iGather; + unsigned long ulGather; + unsigned char *pucGather; + unsigned long ulTemp; + + /* lock tx operation */ + rt_sem_take(&tx_sem, RT_WAITING_FOREVER); + + // + // Wait for space available in the TX FIFO. + // + while(!EthernetSpaceAvail(ETH_BASE)) + { + } + +// + // Fill in the first two bytes of the payload data (configured as padding + // with ETH_PAD_SIZE = 2) with the total length of the payload data + // (minus the Ethernet MAC layer header). + // + *((unsigned short *)(p->payload)) = p->tot_len - 16; + + // + // Initialize the gather register. + // + iGather = 0; + pucGather = (unsigned char *)&ulGather; + ulGather = 0; + + // + // Copy data from the pbuf(s) into the TX Fifo. + // + for(q = p; q != NULL; q = q->next) + { + // + // Intialize a char pointer and index to the pbuf payload data. + // + pucBuf = (unsigned char *)q->payload; + iBuf = 0; + + // + // If the gather buffer has leftover data from a previous pbuf + // in the chain, fill it up and write it to the Tx FIFO. + // + while((iBuf < q->len) && (iGather != 0)) + { + // + // Copy a byte from the pbuf into the gather buffer. + // + pucGather[iGather] = pucBuf[iBuf++]; + + // + // Increment the gather buffer index modulo 4. + // + iGather = ((iGather + 1) % 4); + } + + // + // If the gather index is 0 and the pbuf index is non-zero, + // we have a gather buffer to write into the Tx FIFO. + // + if((iGather == 0) && (iBuf != 0)) + { + HWREG(ETH_BASE + MAC_O_DATA) = ulGather; + ulGather = 0; + } + + // + // Copy words of pbuf data into the Tx FIFO, but don't go past + // the end of the pbuf. + // + if((iBuf % 4) != 0) + { + while((iBuf + 4) <= q->len) + { + ulTemp = (pucBuf[iBuf++] << 0); + ulTemp |= (pucBuf[iBuf++] << 8); + ulTemp |= (pucBuf[iBuf++] << 16); + ulTemp |= (pucBuf[iBuf++] << 24); + HWREG(ETH_BASE + MAC_O_DATA) = ulTemp; + } + } + else + { + // + // Initialze a long pointer into the pbuf for 32-bit access. + // + pulBuf = (unsigned long *)&pucBuf[iBuf]; + + while((iBuf + 4) <= q->len) + { + HWREG(ETH_BASE + MAC_O_DATA) = *pulBuf++; + iBuf += 4; + } + } + // + // Check if leftover data in the pbuf and save it in the gather + // buffer for the next time. + // + while(iBuf < q->len) + { + // + // Copy a byte from the pbuf into the gather buffer. + // + pucGather[iGather] = pucBuf[iBuf++]; + + // + // Increment the gather buffer index modulo 4. + // + iGather = ((iGather + 1) % 4); + } + } + + // + // Send any leftover data to the FIFO. + // + HWREG(ETH_BASE + MAC_O_DATA) = ulGather; + + // + // Wakeup the transmitter. + // + HWREG(ETH_BASE + MAC_O_TR) = MAC_TR_NEWTX; + +#if LINK_STATS + lwip_stats.link.xmit++; +#endif + + return(ERR_OK); +} + +//***************************************************************************** +// +// Low-Level receive routine. Should allocate a pbuf and transfer the bytes +// of the incoming packet from the interface into the pbuf. +// +//***************************************************************************** +struct pbuf * luminaryif_rx(rt_device_t dev) +{ + struct pbuf *p, *q; + u16_t len; + unsigned long ulTemp; + int i; + unsigned long *ptr; + + if(!EthernetPacketAvail(ETH_BASE)) + { + // + // Enable Ethernet RX Interrupt. + // + EthernetIntEnable(ETH_BASE, ETH_INT_RX); + + return(NULL); + } + + // + // Obtain the size of the packet and put it into the "len" variable. + // Note: The length returned in the FIFO length position includes the + // two bytes for the length + the 4 bytes for the FCS. + // + ulTemp = HWREG(ETH_BASE + MAC_O_DATA); + len = ulTemp & 0xFFFF; + + // + // We allocate a pbuf chain of pbufs from the pool. + // + p = pbuf_alloc(PBUF_LINK, len, PBUF_RAM); + + if(p != NULL) + { + // + // Place the first word into the first pbuf location. + // + *(unsigned long *)p->payload = ulTemp; + p->payload = (char *)(p->payload) + 4; + p->len -= 4; + + // + // Process all but the last buffer in the pbuf chain. + // + q = p; + while(q != NULL) + { + // + // Setup a byte pointer into the payload section of the pbuf. + // + ptr = q->payload; + + // + // Read data from FIFO into the current pbuf + // (assume pbuf length is modulo 4) + // + for(i = 0; i < q->len; i += 4) + { + *ptr++ = HWREG(ETH_BASE + MAC_O_DATA); + } + + // + // Link in the next pbuf in the chain. + // + q = q->next; + } + + // + // Restore the first pbuf parameters to their original values. + // + p->payload = (char *)(p->payload) - 4; + p->len += 4; + +#if LINK_STATS + lwip_stats.link.recv++; +#endif + } + else + { + // + // Just read all of the remaining data from the FIFO and dump it. + // + for(i = 4; i < len; i+=4) + { + ulTemp = HWREG(ETH_BASE + MAC_O_DATA); + } + +#if LINK_STATS + lwip_stats.link.memerr++; + lwip_stats.link.drop++; +#endif + } + + return(p); +} + +int rt_hw_luminaryif_init(void) +{ + rt_err_t result; + unsigned long ulUser0, ulUser1; + + /* Enable and Reset the Ethernet Controller. */ + SysCtlPeripheralEnable(SYSCTL_PERIPH_ETH); + SysCtlPeripheralReset(SYSCTL_PERIPH_ETH); + + /* + Enable Port F for Ethernet LEDs. + LED0 Bit 3 Output + LED1 Bit 2 Output + */ + SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOF); + GPIODirModeSet(GPIO_PORTF_BASE, GPIO_PIN_2 | GPIO_PIN_3, GPIO_DIR_MODE_HW); + GPIOPadConfigSet(GPIO_PORTF_BASE, GPIO_PIN_2 | GPIO_PIN_3, + GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_STD); + + FlashUserSet(0x12345678, 0x12345678); + /* Configure the hardware MAC address */ + FlashUserGet(&ulUser0, &ulUser1); + if((ulUser0 == 0xffffffff) || (ulUser1 == 0xffffffff)) + { + rt_kprintf("Fatal error in geting MAC address\n"); + } + + /* init rt-thread device interface */ + luminaryif_dev_entry.parent.parent.init = luminaryif_init; + luminaryif_dev_entry.parent.parent.open = luminaryif_open; + luminaryif_dev_entry.parent.parent.close = luminaryif_close; + luminaryif_dev_entry.parent.parent.read = luminaryif_read; + luminaryif_dev_entry.parent.parent.write = luminaryif_write; + luminaryif_dev_entry.parent.parent.control = luminaryif_control; + luminaryif_dev_entry.parent.eth_rx = luminaryif_rx; + luminaryif_dev_entry.parent.eth_tx = luminaryif_tx; + + /* + Convert the 24/24 split MAC address from NV ram into a 32/16 split MAC + address needed to program the hardware registers, then program the MAC + address into the Ethernet Controller registers. + */ + luminaryif_dev_entry.dev_addr[0] = ((ulUser0 >> 0) & 0xff); + luminaryif_dev_entry.dev_addr[1] = ((ulUser0 >> 8) & 0xff); + luminaryif_dev_entry.dev_addr[2] = ((ulUser0 >> 16) & 0xff); + luminaryif_dev_entry.dev_addr[3] = ((ulUser1 >> 0) & 0xff); + luminaryif_dev_entry.dev_addr[4] = ((ulUser1 >> 8) & 0xff); + luminaryif_dev_entry.dev_addr[5] = ((ulUser1 >> 16) & 0xff); + + /* Program the hardware with it's MAC address (for filtering). */ + EthernetMACAddrSet(ETH_BASE, luminaryif_dev_entry.dev_addr); + + rt_sem_init(&tx_sem, "emac", 1, RT_IPC_FLAG_FIFO); + + result = eth_device_init(&(luminaryif_dev->parent), "E0"); + + return result; +} + diff --git a/bsp/lm3s_9b9x/luminaryif.h b/bsp/lm3s_9b9x/luminaryif.h new file mode 100644 index 0000000000000000000000000000000000000000..e987daea5e6fa5608c25665725a6eb5a7ae9f73b --- /dev/null +++ b/bsp/lm3s_9b9x/luminaryif.h @@ -0,0 +1,12 @@ +//***************************************************************************** +// +// luminaryif.h - Prototypes for the Luminary Micro Ethernet interface. +// +//***************************************************************************** + +#ifndef __LUMINARYIF_H__ +#define __LUMINARYIF_H__ + +int rt_hw_luminaryif_init(void); + +#endif // __LUMINARYIF_H__ diff --git a/bsp/lm3s_9b9x/project.Uv2 b/bsp/lm3s_9b9x/project.Uv2 new file mode 100644 index 0000000000000000000000000000000000000000..746a4a1fffd7d34afd13e0fda9b6e5e268ef602c --- /dev/null +++ b/bsp/lm3s_9b9x/project.Uv2 @@ -0,0 +1,210 @@ +### uVision2 Project, (C) Keil Software +### Do not modify ! + +Target (RT-Thread-lm3s), 0x0004 // Tools: 'ARM-ADS' + +Group (Startup) +Group (Kernel) +Group (LM3S) +Group (Filesystem) +Group (finsh) +Group (LwIP) +Group (library) + +File 1,1,<.\application.c> +File 1,1,<.\startup.c> +File 1,1,<.\board.c> +File 1,1,<.\sdcard.c> +File 1,1,<.\luminaryif.c> +File 2,1,<..\..\src\clock.c> +File 2,1,<..\..\src\device.c> +File 2,1,<..\..\src\idle.c> +File 2,1,<..\..\src\ipc.c> +File 2,1,<..\..\src\irq.c> +File 2,1,<..\..\src\kservice.c> +File 2,1,<..\..\src\mem.c> +File 2,1,<..\..\src\mempool.c> +File 2,1,<..\..\src\module.c> +File 2,1,<..\..\src\object.c> +File 2,1,<..\..\src\rtm.c> +File 2,1,<..\..\src\scheduler.c> +File 2,1,<..\..\src\slab.c> +File 2,1,<..\..\src\thread.c> +File 2,1,<..\..\src\timer.c> +File 3,1,<..\..\libcpu\arm\lm3s\cpu.c> +File 3,1,<..\..\libcpu\arm\lm3s\fault.c> +File 3,1,<..\..\libcpu\arm\lm3s\interrupt.c> +File 3,1,<..\..\libcpu\arm\lm3s\serial.c> +File 3,1,<..\..\libcpu\arm\lm3s\stack.c> +File 3,2,<..\..\libcpu\arm\lm3s\context_rvds.S> +File 3,2,<..\..\libcpu\arm\lm3s\fault_rvds.S> +File 3,2,<..\..\libcpu\arm\lm3s\start_rvds.S> +File 3,1,<..\..\libcpu\arm\common\backtrace.c> +File 3,1,<..\..\libcpu\arm\common\div0.c> +File 3,1,<..\..\libcpu\arm\common\showmem.c> +File 4,1,<..\..\components\dfs\src\dfs.c> +File 4,1,<..\..\components\dfs\src\dfs_fs.c> +File 4,1,<..\..\components\dfs\src\dfs_file.c> +File 4,1,<..\..\components\dfs\src\dfs_posix.c> +File 4,1,<..\..\components\dfs\filesystems\elmfat\dfs_elm.c> +File 4,1,<..\..\components\dfs\filesystems\elmfat\ff.c> +File 5,1,<..\..\components\finsh\cmd.c> +File 5,1,<..\..\components\finsh\finsh_compiler.c> +File 5,1,<..\..\components\finsh\finsh_error.c> +File 5,1,<..\..\components\finsh\finsh_heap.c> +File 5,1,<..\..\components\finsh\finsh_init.c> +File 5,1,<..\..\components\finsh\finsh_node.c> +File 5,1,<..\..\components\finsh\finsh_ops.c> +File 5,1,<..\..\components\finsh\finsh_parser.c> +File 5,1,<..\..\components\finsh\finsh_token.c> +File 5,1,<..\..\components\finsh\finsh_var.c> +File 5,1,<..\..\components\finsh\finsh_vm.c> +File 5,1,<..\..\components\finsh\shell.c> +File 5,1,<..\..\components\finsh\symbol.c> +File 6,1,<..\..\components\net\lwip\src\api\api_lib.c> +File 6,1,<..\..\components\net\lwip\src\api\api_msg.c> +File 6,1,<..\..\components\net\lwip\src\api\err.c> +File 6,1,<..\..\components\net\lwip\src\api\netbuf.c> +File 6,1,<..\..\components\net\lwip\src\api\netdb.c> +File 6,1,<..\..\components\net\lwip\src\api\netifapi.c> +File 6,1,<..\..\components\net\lwip\src\api\sockets.c> +File 6,1,<..\..\components\net\lwip\src\api\tcpip.c> +File 6,1,<..\..\components\net\lwip\src\arch\sys_arch.c> +File 6,1,<..\..\components\net\lwip\src\arch\sys_arch_init.c> +File 6,1,<..\..\components\net\lwip\src\core\dhcp.c> +File 6,1,<..\..\components\net\lwip\src\core\dns.c> +File 6,1,<..\..\components\net\lwip\src\core\init.c> +File 6,1,<..\..\components\net\lwip\src\core\memp.c> +File 6,1,<..\..\components\net\lwip\src\core\netif.c> +File 6,1,<..\..\components\net\lwip\src\core\pbuf.c> +File 6,1,<..\..\components\net\lwip\src\core\raw.c> +File 6,1,<..\..\components\net\lwip\src\core\stats.c> +File 6,1,<..\..\components\net\lwip\src\core\sys.c> +File 6,1,<..\..\components\net\lwip\src\core\tcp.c> +File 6,1,<..\..\components\net\lwip\src\core\tcp_in.c> +File 6,1,<..\..\components\net\lwip\src\core\tcp_out.c> +File 6,1,<..\..\components\net\lwip\src\core\udp.c> +File 6,1,<..\..\components\net\lwip\src\core\ipv4\autoip.c> +File 6,1,<..\..\components\net\lwip\src\core\ipv4\icmp.c> +File 6,1,<..\..\components\net\lwip\src\core\ipv4\igmp.c> +File 6,1,<..\..\components\net\lwip\src\core\ipv4\inet.c> +File 6,1,<..\..\components\net\lwip\src\core\ipv4\inet_chksum.c> +File 6,1,<..\..\components\net\lwip\src\core\ipv4\ip.c> +File 6,1,<..\..\components\net\lwip\src\core\ipv4\ip_addr.c> +File 6,1,<..\..\components\net\lwip\src\core\ipv4\ip_frag.c> +File 6,1,<..\..\components\net\lwip\src\core\snmp\asn1_dec.c> +File 6,1,<..\..\components\net\lwip\src\core\snmp\asn1_enc.c> +File 6,1,<..\..\components\net\lwip\src\core\snmp\mib2.c> +File 6,1,<..\..\components\net\lwip\src\core\snmp\mib_structs.c> +File 6,1,<..\..\components\net\lwip\src\core\snmp\msg_in.c> +File 6,1,<..\..\components\net\lwip\src\core\snmp\msg_out.c> +File 6,1,<..\..\components\net\lwip\src\netif\etharp.c> +File 6,1,<..\..\components\net\lwip\src\netif\ethernetif.c> +File 6,1,<..\..\components\net\lwip\src\netif\loopif.c> +File 6,1,<..\..\components\net\lwip\src\netif\slipif.c> +File 6,1,<..\..\components\net\lwip\src\netif\ppp\auth.c> +File 6,1,<..\..\components\net\lwip\src\netif\ppp\chap.c> +File 6,1,<..\..\components\net\lwip\src\netif\ppp\chpms.c> +File 6,1,<..\..\components\net\lwip\src\netif\ppp\fsm.c> +File 6,1,<..\..\components\net\lwip\src\netif\ppp\ipcp.c> +File 6,1,<..\..\components\net\lwip\src\netif\ppp\lcp.c> +File 6,1,<..\..\components\net\lwip\src\netif\ppp\magic.c> +File 6,1,<..\..\components\net\lwip\src\netif\ppp\md5.c> +File 6,1,<..\..\components\net\lwip\src\netif\ppp\pap.c> +File 6,1,<..\..\components\net\lwip\src\netif\ppp\ppp.c> +File 6,1,<..\..\components\net\lwip\src\netif\ppp\ppp_oe.c> +File 6,1,<..\..\components\net\lwip\src\netif\ppp\randm.c> +File 6,1,<..\..\components\net\lwip\src\netif\ppp\vj.c> +File 7,4,<.\Libraries\driverlib\rvmdk\driverlib.lib> + + +Options 1,0,0 // Target 'RT-Thread-lm3s' + Device (LM3S8962) + Vendor (Luminary Micro) + Cpu (IRAM(0x20000000-0x2000FFFF) IROM(0-0x3FFFF) CLOCK(8000000) CPUTYPE("Cortex-M3")) + FlashUt () + StupF ("STARTUP\Luminary\Startup.s" ("Luminary Startup Code")) + FlashDR (UL2CM3(-UU0101L5E -O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FD20000000 -FC800 -FN1 -FF0LM3S_256 -FS00 -FL040000)) + DevID (4722) + Rgf (LM3Sxxxx.H) + Mem () + C () + A () + RL () + OH () + DBC_IFX () + DBC_CMS () + DBC_AMS () + DBC_LMS () + UseEnv=0 + EnvBin () + EnvInc () + EnvLib () + EnvReg (˙Luminary\) + OrgReg (˙Luminary\) + TgStat=16 + OutDir (.\) + OutName (rtthread-lm3s) + GenApp=1 + GenLib=0 + GenHex=0 + Debug=1 + Browse=1 + LstDir (.\) + HexSel=1 + MG32K=0 + TGMORE=0 + RunUsr 0 0 <> + RunUsr 1 0 <> + BrunUsr 0 0 <> + BrunUsr 1 0 <> + CrunUsr 0 0 <> + CrunUsr 1 0 <> + SVCSID <> + GLFLAGS=1790 + ADSFLGA { 243,31,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } + ACPUTYP ("Cortex-M3") + RVDEV () + ADSTFLGA { 0,12,0,0,163,0,0,66,0,0,0,0,0,0,0,0,0,0,0,0 } + OCMADSOCM { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } + OCMADSIRAM { 0,0,0,0,32,0,0,1,0 } + OCMADSIROM { 1,0,0,0,0,0,0,4,0 } + OCMADSXRAM { 0,0,0,0,0,0,0,0,0 } + OCR_RVCT { 1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,4,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,32,0,0,1,0,0,0,0,0,0,0,0,0,0 } + RV_STAVEC () + ADSCCFLG { 5,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } + ADSCMISC () + ADSCDEFN () + ADSCUDEF () + ADSCINCD (Libraries\inc;..\..\include;..\..\libcpu\arm\lm3s;..\..\components\net\lwip\src\include;Libraries\driverlib;.;..\..\components\net\lwip\src\include\ipv4;..\..\components\dfs;Libraries;..\..\components\net\lwip\src\arch\include;..\..\components\dfs\include;..\..\components\net\lwip\src;..\..\libcpu\arm\common;..\..\components\net\lwip\src\netif\ppp;..\..\components\finsh;..\..\components\net\lwip\src\include\netif) + ADSASFLG { 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } + ADSAMISC () + ADSADEFN () + ADSAUDEF () + ADSAINCD () + PropFld { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } + IncBld=1 + AlwaysBuild=0 + GenAsm=0 + AsmAsm=0 + PublicsOnly=0 + StopCode=3 + CustArgs () + LibMods () + ADSLDFG { 17,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } + ADSLDTA (0x00000000) + ADSLDDA (0x00000000) + ADSLDSC () + ADSLDIB () + ADSLDIC () + ADSLDMC ( --keep __fsym_* --keep __vsym_*) + ADSLDIF () + ADSLDDW () + OPTDL (SARMCM3.DLL)()(DLM.DLL)(-pLM3S8962)(SARMCM3.DLL)()(TLM.DLL)(-pLM3S8962) + OPTDBG 48118,4,()()()()()()()()()() (BIN\lmidk-agdi.dll)()()() + FLASH1 { 1,0,0,0,1,0,0,0,3,16,0,0,0,0,0,0,0,0,0,0 } + FLASH2 (BIN\lmidk-agdi.dll) + FLASH3 ("" ()) + FLASH4 () +EndOpt + diff --git a/bsp/lm3s_9b9x/rtconfig.h b/bsp/lm3s_9b9x/rtconfig.h new file mode 100644 index 0000000000000000000000000000000000000000..c4158624d485a761db8f7cd777feee498733108a --- /dev/null +++ b/bsp/lm3s_9b9x/rtconfig.h @@ -0,0 +1,153 @@ +/* RT-Thread config file */ +#ifndef __RTTHREAD_CFG_H__ +#define __RTTHREAD_CFG_H__ + +/* RT_NAME_MAX*/ +#define RT_NAME_MAX 8 + +/* RT_ALIGN_SIZE*/ +#define RT_ALIGN_SIZE 4 + +/* PRIORITY_MAX*/ +#define RT_THREAD_PRIORITY_MAX 32 + +/* Tick per Second*/ +#define RT_TICK_PER_SECOND 100 + +/* SECTION: RT_DEBUG */ +/* Thread Debug*/ +/* #define RT_DEBUG */ +/* #define RT_THREAD_DEBUG */ + +/* Using Hook*/ +#define RT_USING_HOOK + +/* SECTION: IPC */ +/* Using Semaphore*/ +#define RT_USING_SEMAPHORE + +/* Using Mutex*/ +#define RT_USING_MUTEX + +/* Using Event*/ +#define RT_USING_EVENT + +/* Using Faset Event*/ +/* #define RT_USING_FASTEVENT */ + +/* Using MailBox*/ +#define RT_USING_MAILBOX + +/* Using Message Queue*/ +#define RT_USING_MESSAGEQUEUE + +/* SECTION: Memory Management */ +/* Using Memory Pool Management*/ +#define RT_USING_MEMPOOL + +/* Using Dynamic Heap Management*/ +#define RT_USING_HEAP + +/* Using Small MM*/ +#define RT_USING_SMALL_MEM + +/* Using SLAB Allocator*/ +/* #define RT_USING_SLAB */ + +/* SECTION: Device System */ +/* Using Device System*/ +#define RT_USING_DEVICE + +#define RT_USING_UART1 +// #define RT_USING_UART2 +// #define RT_USING_UART3 + +/* SECTION: Console options */ +#define RT_USING_CONSOLE +/* the buffer size of console*/ +#define RT_CONSOLEBUF_SIZE 128 + +/* SECTION: FinSH shell options */ +/* Using FinSH as Shell*/ +#define RT_USING_FINSH +/* Using symbol table */ +#define FINSH_USING_SYMTAB +#define FINSH_USING_DESCRIPTION + +#define RT_USING_DFS +/* SECTION: DFS options */ +#define RT_USING_DFS_ELMFAT +#define RT_DFS_ELM_WORD_ACCESS + +/* the max number of mounted filesystem */ +#define DFS_FILESYSTEMS_MAX 1 +/* the max number of opened files */ +#define DFS_FD_MAX 4 +/* the max number of cached sector */ +#define DFS_CACHE_MAX_NUM 4 + +/* SECTION: lwip, a lighwight TCP/IP protocol stack */ +/* Using lighweight TCP/IP protocol stack*/ +#define RT_USING_LWIP + +/* Trace LwIP protocol*/ +/* #define RT_LWIP_DEBUG */ + +#define RT_LWIP_USING_RT_MEM + +/* Enable ICMP protocol*/ +#define RT_LWIP_ICMP + +/* Enable IGMP protocol*/ +#define RT_LWIP_IGMP + +/* Enable UDP protocol*/ +#define RT_LWIP_UDP + +/* Enable TCP protocol*/ +#define RT_LWIP_TCP + +/* the number of simulatenously active TCP connections*/ +#define RT_LWIP_TCP_PCB_NUM 5 + +/* Ethernet padding size */ +#define RT_LWIP_ETH_PAD_SIZE 2 + +/* TCP sender buffer space*/ +#define RT_LWIP_TCP_SND_BUF 1024*8 +/* Enable SNMP protocol*/ +#define RT_LWIP_SNMP + +/* Using DHCP*/ +/* #define RT_LWIP_DHCP */ + +#define RT_LWIP_DNS + +/* ip address of target*/ +#define RT_LWIP_IPADDR0 192 +#define RT_LWIP_IPADDR1 168 +#define RT_LWIP_IPADDR2 1 +#define RT_LWIP_IPADDR3 30 + +/* gateway address of target*/ +#define RT_LWIP_GWADDR0 192 +#define RT_LWIP_GWADDR1 168 +#define RT_LWIP_GWADDR2 1 +#define RT_LWIP_GWADDR3 1 + +/* mask address of target*/ +#define RT_LWIP_MSKADDR0 255 +#define RT_LWIP_MSKADDR1 255 +#define RT_LWIP_MSKADDR2 255 +#define RT_LWIP_MSKADDR3 0 + +/* tcp thread options */ +#define RT_LWIP_TCPTHREAD_PRIORITY 22 +#define RT_LWIP_TCPTHREAD_MBOX_SIZE 4 +#define RT_LWIP_TCPTHREAD_STACKSIZE 1024 + +/* ethernet if thread options */ +#define RT_LWIP_ETHTHREAD_PRIORITY 23 +#define RT_LWIP_ETHTHREAD_MBOX_SIZE 4 +#define RT_LWIP_ETHTHREAD_STACKSIZE 512 +#endif diff --git a/bsp/lm3s_9b9x/rtconfig.py b/bsp/lm3s_9b9x/rtconfig.py new file mode 100644 index 0000000000000000000000000000000000000000..52d3b71b4ecc13a6a62fa77dbe148b27f218a444 --- /dev/null +++ b/bsp/lm3s_9b9x/rtconfig.py @@ -0,0 +1,67 @@ +# toolchains options +ARCH='arm' +CPU='lm3s' +CROSS_TOOL = 'gcc' + +if CROSS_TOOL == 'gcc': + PLATFORM = 'gcc' + EXEC_PATH = 'E:/Program Files/CodeSourcery/Sourcery G++ Lite/bin' +elif CROSS_TOOL == 'keil': + PLATFORM = 'armcc' + EXEC_PATH = 'E:/Keil' +BUILD = 'debug' + +if PLATFORM == 'gcc': + # toolchains + PREFIX = 'arm-none-eabi-' + CC = PREFIX + 'gcc' + AS = PREFIX + 'gcc' + AR = PREFIX + 'ar' + LINK = PREFIX + 'gcc' + TARGET_EXT = 'axf' + SIZE = PREFIX + 'size' + OBJDUMP = PREFIX + 'objdump' + OBJCPY = PREFIX + 'objcopy' + + DEVICE = ' -mcpu=cortex-m3 -mthumb' + CFLAGS = DEVICE + ' -Dsourcerygxx -ffunction-sections -fdata-sections' + AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp' + LFLAGS = DEVICE + ' -Wl,--gc-sections,-Map=rtthread-lm3s.map,-cref,-u,Reset_Handler -T lm3s_rom.ld' + + CPATH = '' + LPATH = '' + + if BUILD == 'debug': + CFLAGS += ' -O0 -gdwarf-2' + AFLAGS += ' -gdwarf-2' + else: + CFLAGS += ' -O2' + + POST_ACTION = OBJCPY + ' -O binary $TARGET rtthread.bin\n' + SIZE + ' $TARGET \n' + +elif PLATFORM == 'armcc': + # toolchains + CC = 'armcc' + AS = 'armasm' + AR = 'armar' + LINK = 'armlink' + TARGET_EXT = 'axf' + + DEVICE = ' --device DLM' + CFLAGS = DEVICE + ' --apcs=interwork' + AFLAGS = DEVICE + LFLAGS = DEVICE + ' --info sizes --info totals --info unused --info veneers --list rtthread-lm3s.map --scatter lm3s_rom.sct' + + CFLAGS += ' -I' + EXEC_PATH + '/ARM/RV31/INC' + LFLAGS += ' --libpath ' + EXEC_PATH + '/ARM/RV31/LIB' + + EXEC_PATH += '/arm/bin40/' + + if BUILD == 'debug': + CFLAGS += ' -g -O0' + AFLAGS += ' -g' + else: + CFLAGS += ' -O2' + + RT_USING_MINILIBC = False + POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET' diff --git a/bsp/lm3s_9b9x/sdcard.c b/bsp/lm3s_9b9x/sdcard.c new file mode 100644 index 0000000000000000000000000000000000000000..785f2eaf3e8b7fc0268e9dc49fa5e5fd88f60096 --- /dev/null +++ b/bsp/lm3s_9b9x/sdcard.c @@ -0,0 +1,781 @@ +/*-----------------------------------------------------------------------*/ +/* MMC/SDC (in SPI mode) control module (C)ChaN, 2007 */ +/*-----------------------------------------------------------------------*/ +/* Only rcvr_spi(), xmit_spi(), disk_timerproc() and some macros */ +/* are platform dependent. */ +/*-----------------------------------------------------------------------*/ + +/* + * This file was modified from a sample available from the FatFs + * web site. It was modified to work with a Luminary Micro + * EK-LM3S6965 evaluation board. + * + * Note that the SSI port is shared with the osram display. The code + * in this file does not attempt to share the SSI port with the osram, + * it assumes the osram is not being used. + */ +#include + +#include +#include +#include +#include +#include + +/* Status of Disk Functions */ +typedef rt_uint8_t DSTATUS; + +/* Results of Disk Functions */ +typedef enum { + RES_OK = 0, /* 0: Successful */ + RES_ERROR, /* 1: R/W Error */ + RES_WRPRT, /* 2: Write Protected */ + RES_NOTRDY, /* 3: Not Ready */ + RES_PARERR /* 4: Invalid Parameter */ +} DRESULT; + +/* Disk Status Bits (DSTATUS) */ + +#define STA_NOINIT 0x01 /* Drive not initialized */ +#define STA_NODISK 0x02 /* No medium in the drive */ +#define STA_PROTECT 0x04 /* Write protected */ + +/* Definitions for MMC/SDC command */ +#define CMD0 (0x40+0) /* GO_IDLE_STATE */ +#define CMD1 (0x40+1) /* SEND_OP_COND */ +#define CMD8 (0x40+8) /* SEND_IF_COND */ +#define CMD9 (0x40+9) /* SEND_CSD */ +#define CMD10 (0x40+10) /* SEND_CID */ +#define CMD12 (0x40+12) /* STOP_TRANSMISSION */ +#define CMD16 (0x40+16) /* SET_BLOCKLEN */ +#define CMD17 (0x40+17) /* READ_SINGLE_BLOCK */ +#define CMD18 (0x40+18) /* READ_MULTIPLE_BLOCK */ +#define CMD23 (0x40+23) /* SET_BLOCK_COUNT */ +#define CMD24 (0x40+24) /* WRITE_BLOCK */ +#define CMD25 (0x40+25) /* WRITE_MULTIPLE_BLOCK */ +#define CMD41 (0x40+41) /* SEND_OP_COND (ACMD) */ +#define CMD55 (0x40+55) /* APP_CMD */ +#define CMD58 (0x40+58) /* READ_OCR */ + +/* Command code for disk_ioctrl() */ + +/* Generic command */ +#define CTRL_SYNC 0 /* Mandatory for write functions */ +#define GET_SECTOR_COUNT 1 /* Mandatory for only f_mkfs() */ +#define GET_SECTOR_SIZE 2 /* Mandatory for multiple sector size cfg */ +#define GET_BLOCK_SIZE 3 /* Mandatory for only f_mkfs() */ +#define CTRL_POWER 4 +#define CTRL_LOCK 5 +#define CTRL_EJECT 6 +/* MMC/SDC command */ +#define MMC_GET_TYPE 10 +#define MMC_GET_CSD 11 +#define MMC_GET_CID 12 +#define MMC_GET_OCR 13 +#define MMC_GET_SDSTAT 14 +/* ATA/CF command */ +#define ATA_GET_REV 20 +#define ATA_GET_MODEL 21 +#define ATA_GET_SN 22 + +/* Peripheral definitions for EK-LM3S6965 board */ +// SSI port +#define SDC_SSI_BASE SSI0_BASE +#define SDC_SSI_SYSCTL_PERIPH SYSCTL_PERIPH_SSI0 + +// GPIO for SSI pins +#define SDC_GPIO_PORT_BASE GPIO_PORTA_BASE +#define SDC_GPIO_SYSCTL_PERIPH SYSCTL_PERIPH_GPIOA +#define SDC_SSI_CLK GPIO_PIN_2 +#define SDC_SSI_TX GPIO_PIN_5 +#define SDC_SSI_RX GPIO_PIN_4 +#define SDC_SSI_FSS GPIO_PIN_3 +#define SDC_SSI_PINS (SDC_SSI_TX | SDC_SSI_RX | SDC_SSI_CLK) + +// GPIO for card chip select +#define SDC_CS_GPIO_PORT_BASE GPIO_PORTG_BASE +#define SDC_CS_GPIO_SYSCTL_PERIPH SYSCTL_PERIPH_GPIOG +#define SDC_CS GPIO_PIN_0 + +// asserts the CS pin to the card +static +void SELECT (void) +{ + GPIOPinWrite(SDC_CS_GPIO_PORT_BASE, SDC_CS, 0); +} + +// de-asserts the CS pin to the card +static +void DESELECT (void) +{ + GPIOPinWrite(SDC_CS_GPIO_PORT_BASE, SDC_CS, SDC_CS); +} + + +/*-------------------------------------------------------------------------- + + Module Private Functions + +---------------------------------------------------------------------------*/ + +static volatile +DSTATUS Stat = STA_NOINIT; /* Disk status */ + +static volatile +rt_uint8_t Timer1, Timer2; /* 100Hz decrement timer */ + +static +rt_uint8_t CardType; /* b0:MMC, b1:SDC, b2:Block addressing */ + +static +rt_uint8_t PowerFlag = 0; /* indicates if "power" is on */ + +/*-----------------------------------------------------------------------*/ +/* Transmit a byte to MMC via SPI (Platform dependent) */ +/*-----------------------------------------------------------------------*/ + +static +void xmit_spi (rt_uint8_t dat) +{ + rt_uint32_t rcvdat; + + SSIDataPut(SDC_SSI_BASE, dat); /* Write the data to the tx fifo */ + + SSIDataGet(SDC_SSI_BASE, &rcvdat); /* flush data read during the write */ +} + + +/*-----------------------------------------------------------------------*/ +/* Receive a byte from MMC via SPI (Platform dependent) */ +/*-----------------------------------------------------------------------*/ + +static +rt_uint8_t rcvr_spi (void) +{ + rt_uint32_t rcvdat; + + SSIDataPut(SDC_SSI_BASE, 0xFF); /* write dummy data */ + + SSIDataGet(SDC_SSI_BASE, &rcvdat); /* read data frm rx fifo */ + + return (rt_uint8_t)rcvdat; +} + + +static +void rcvr_spi_m (rt_uint8_t *dst) +{ + *dst = rcvr_spi(); +} + +/*-----------------------------------------------------------------------*/ +/* Wait for card ready */ +/*-----------------------------------------------------------------------*/ + +static +rt_uint8_t wait_ready (void) +{ + rt_uint8_t res; + + + Timer2 = 50; /* Wait for ready in timeout of 500ms */ + rcvr_spi(); + do + res = rcvr_spi(); + while ((res != 0xFF) && Timer2); + + return res; +} + +/*-----------------------------------------------------------------------*/ +/* Send 80 or so clock transitions with CS and DI held high. This is */ +/* required after card power up to get it into SPI mode */ +/*-----------------------------------------------------------------------*/ +static +void send_initial_clock_train(void) +{ + unsigned int i; + rt_uint32_t dat; + + /* Ensure CS is held high. */ + DESELECT(); + + /* Switch the SSI TX line to a GPIO and drive it high too. */ + GPIOPinTypeGPIOOutput(SDC_GPIO_PORT_BASE, SDC_SSI_TX); + GPIOPinWrite(SDC_GPIO_PORT_BASE, SDC_SSI_TX, SDC_SSI_TX); + + /* Send 10 bytes over the SSI. This causes the clock to wiggle the */ + /* required number of times. */ + for(i = 0 ; i < 10 ; i++) + { + /* Write DUMMY data. SSIDataPut() waits until there is room in the */ + /* FIFO. */ + SSIDataPut(SDC_SSI_BASE, 0xFF); + + /* Flush data read during data write. */ + SSIDataGet(SDC_SSI_BASE, &dat); + } + + /* Revert to hardware control of the SSI TX line. */ + GPIOPinTypeSSI(SDC_GPIO_PORT_BASE, SDC_SSI_TX); +} + +/*-----------------------------------------------------------------------*/ +/* Power Control (Platform dependent) */ +/*-----------------------------------------------------------------------*/ +/* When the target system does not support socket power control, there */ +/* is nothing to do in these functions and chk_power always returns 1. */ + +static +void power_on (void) +{ + /* + * This doesn't really turn the power on, but initializes the + * SSI port and pins needed to talk to the card. + */ + + /* Enable the peripherals used to drive the SDC on SSI, and the CS */ + SysCtlPeripheralEnable(SDC_SSI_SYSCTL_PERIPH); + SysCtlPeripheralEnable(SDC_GPIO_SYSCTL_PERIPH); + SysCtlPeripheralEnable(SDC_CS_GPIO_SYSCTL_PERIPH); + + /* Configure the appropriate pins to be SSI instead of GPIO */ + GPIOPinTypeSSI(SDC_GPIO_PORT_BASE, SDC_SSI_PINS); + GPIOPinTypeGPIOOutput(SDC_CS_GPIO_PORT_BASE, SDC_CS); + GPIOPadConfigSet(SDC_GPIO_PORT_BASE, SDC_SSI_PINS, GPIO_STRENGTH_4MA, + GPIO_PIN_TYPE_STD_WPU); + GPIOPadConfigSet(SDC_CS_GPIO_PORT_BASE, SDC_CS, GPIO_STRENGTH_4MA, + GPIO_PIN_TYPE_STD_WPU); + + /* Deassert the SSI0 chip select */ + GPIOPinWrite(SDC_CS_GPIO_PORT_BASE, SDC_CS, SDC_CS); + + /* Configure the SSI0 port */ + SSIConfigSetExpClk(SDC_SSI_BASE, SysCtlClockGet(), SSI_FRF_MOTO_MODE_0, + SSI_MODE_MASTER, 400000, 8); + SSIEnable(SDC_SSI_BASE); + + /* Set DI and CS high and apply more than 74 pulses to SCLK for the card */ + /* to be able to accept a native command. */ + send_initial_clock_train(); + + PowerFlag = 1; +} + +// set the SSI speed to the max setting +static +void set_max_speed(void) +{ + unsigned long i; + + /* Disable the SSI */ + SSIDisable(SDC_SSI_BASE); + + /* Set the maximum speed as half the system clock, with a max of 12.5 MHz. */ + i = SysCtlClockGet() / 2; + if(i > 12500000) + { + i = 12500000; + } + + /* Configure the SSI0 port */ + SSIConfigSetExpClk(SDC_SSI_BASE, SysCtlClockGet(), SSI_FRF_MOTO_MODE_0, + SSI_MODE_MASTER, i, 8); + + /* Enable the SSI */ + SSIEnable(SDC_SSI_BASE); +} + +static +void power_off (void) +{ + PowerFlag = 0; +} + +static +int chk_power(void) /* Socket power state: 0=off, 1=on */ +{ + return PowerFlag; +} + + + +/*-----------------------------------------------------------------------*/ +/* Receive a data packet from MMC */ +/*-----------------------------------------------------------------------*/ + +static +rt_bool_t rcvr_datablock ( + rt_uint8_t *buff, /* Data buffer to store received data */ + unsigned int btr /* Byte count (must be even number) */ +) +{ + rt_uint8_t token; + + + Timer1 = 10; + do { /* Wait for data packet in timeout of 100ms */ + token = rcvr_spi(); + } while ((token == 0xFF) && Timer1); + if(token != 0xFE) return RT_FALSE; /* If not valid data token, retutn with error */ + + do { /* Receive the data block into buffer */ + rcvr_spi_m(buff++); + rcvr_spi_m(buff++); + } while (btr -= 2); + rcvr_spi(); /* Discard CRC */ + rcvr_spi(); + + return RT_TRUE; /* Return with success */ +} + + + +/*-----------------------------------------------------------------------*/ +/* Send a data packet to MMC */ +/*-----------------------------------------------------------------------*/ + +#if _READONLY == 0 +static +rt_bool_t xmit_datablock ( + const rt_uint8_t *buff, /* 512 byte data block to be transmitted */ + rt_uint8_t token /* Data/Stop token */ +) +{ + rt_uint8_t resp, wc; + + + if (wait_ready() != 0xFF) return RT_FALSE; + + xmit_spi(token); /* Xmit data token */ + if (token != 0xFD) { /* Is data token */ + wc = 0; + do { /* Xmit the 512 byte data block to MMC */ + xmit_spi(*buff++); + xmit_spi(*buff++); + } while (--wc); + xmit_spi(0xFF); /* CRC (Dummy) */ + xmit_spi(0xFF); + resp = rcvr_spi(); /* Reveive data response */ + if ((resp & 0x1F) != 0x05) /* If not accepted, return with error */ + return RT_FALSE; + } + + return RT_TRUE; +} +#endif /* _READONLY */ + + + +/*-----------------------------------------------------------------------*/ +/* Send a command packet to MMC */ +/*-----------------------------------------------------------------------*/ + +static +rt_uint8_t send_cmd ( + rt_uint8_t cmd, /* Command byte */ + rt_uint32_t arg /* Argument */ +) +{ + rt_uint8_t n, res; + + + if (wait_ready() != 0xFF) return 0xFF; + + /* Send command packet */ + xmit_spi(cmd); /* Command */ + xmit_spi((rt_uint8_t)(arg >> 24)); /* Argument[31..24] */ + xmit_spi((rt_uint8_t)(arg >> 16)); /* Argument[23..16] */ + xmit_spi((rt_uint8_t)(arg >> 8)); /* Argument[15..8] */ + xmit_spi((rt_uint8_t)arg); /* Argument[7..0] */ + n = 0; + if (cmd == CMD0) n = 0x95; /* CRC for CMD0(0) */ + if (cmd == CMD8) n = 0x87; /* CRC for CMD8(0x1AA) */ + xmit_spi(n); + + /* Receive command response */ + if (cmd == CMD12) rcvr_spi(); /* Skip a stuff byte when stop reading */ + n = 10; /* Wait for a valid response in timeout of 10 attempts */ + do + res = rcvr_spi(); + while ((res & 0x80) && --n); + + return res; /* Return with the response value */ +} + + + +/*-------------------------------------------------------------------------- + + Public Functions + +---------------------------------------------------------------------------*/ + + +/*-----------------------------------------------------------------------*/ +/* Initialize Disk Drive */ +/*-----------------------------------------------------------------------*/ +static +DSTATUS sdcard_initialize ( + rt_uint8_t drv /* Physical drive nmuber (0) */ +) +{ + rt_uint8_t n, ty, ocr[4]; + + + if (drv) return STA_NOINIT; /* Supports only single drive */ + if (Stat & STA_NODISK) return Stat; /* No card in the socket */ + + power_on(); /* Force socket power on */ + send_initial_clock_train(); + + SELECT(); /* CS = L */ + ty = 0; + if (send_cmd(CMD0, 0) == 1) { /* Enter Idle state */ + Timer1 = 100; /* Initialization timeout of 1000 msec */ + if (send_cmd(CMD8, 0x1AA) == 1) { /* SDC Ver2+ */ + for (n = 0; n < 4; n++) ocr[n] = rcvr_spi(); + if (ocr[2] == 0x01 && ocr[3] == 0xAA) { /* The card can work at vdd range of 2.7-3.6V */ + do { + if (send_cmd(CMD55, 0) <= 1 && send_cmd(CMD41, 1UL << 30) == 0) break; /* ACMD41 with HCS bit */ + } while (Timer1); + if (Timer1 && send_cmd(CMD58, 0) == 0) { /* Check CCS bit */ + for (n = 0; n < 4; n++) ocr[n] = rcvr_spi(); + ty = (ocr[0] & 0x40) ? 6 : 2; + } + } + } else { /* SDC Ver1 or MMC */ + ty = (send_cmd(CMD55, 0) <= 1 && send_cmd(CMD41, 0) <= 1) ? 2 : 1; /* SDC : MMC */ + do { + if (ty == 2) { + if (send_cmd(CMD55, 0) <= 1 && send_cmd(CMD41, 0) == 0) break; /* ACMD41 */ + } else { + if (send_cmd(CMD1, 0) == 0) break; /* CMD1 */ + } + } while (Timer1); + if (!Timer1 || send_cmd(CMD16, 512) != 0) /* Select R/W block length */ + ty = 0; + } + } + CardType = ty; + DESELECT(); /* CS = H */ + rcvr_spi(); /* Idle (Release DO) */ + + if (ty) { /* Initialization succeded */ + Stat &= ~STA_NOINIT; /* Clear STA_NOINIT */ + set_max_speed(); + } else { /* Initialization failed */ + power_off(); + } + + return Stat; +} + +/*-----------------------------------------------------------------------*/ +/* Read Sector(s) */ +/*-----------------------------------------------------------------------*/ +static +DRESULT sdcard_read ( + rt_uint8_t drv, /* Physical drive nmuber (0) */ + rt_uint8_t *buff, /* Pointer to the data buffer to store read data */ + rt_uint32_t sector, /* Start sector number (LBA) */ + rt_uint8_t count /* Sector count (1..255) */ +) +{ + if (drv || !count) return RES_PARERR; + if (Stat & STA_NOINIT) return RES_NOTRDY; + + if (!(CardType & 4)) sector *= 512; /* Convert to byte address if needed */ + + SELECT(); /* CS = L */ + + if (count == 1) { /* Single block read */ + if ((send_cmd(CMD17, sector) == 0) /* READ_SINGLE_BLOCK */ + && rcvr_datablock(buff, 512)) + count = 0; + } + else { /* Multiple block read */ + if (send_cmd(CMD18, sector) == 0) { /* READ_MULTIPLE_BLOCK */ + do { + if (!rcvr_datablock(buff, 512)) break; + buff += 512; + } while (--count); + send_cmd(CMD12, 0); /* STOP_TRANSMISSION */ + } + } + + DESELECT(); /* CS = H */ + rcvr_spi(); /* Idle (Release DO) */ + + return count ? RES_ERROR : RES_OK; +} + + + +/*-----------------------------------------------------------------------*/ +/* Write Sector(s) */ +/*-----------------------------------------------------------------------*/ + +#if _READONLY == 0 +static +DRESULT sdcard_write ( + rt_uint8_t drv, /* Physical drive nmuber (0) */ + const rt_uint8_t *buff, /* Pointer to the data to be written */ + rt_uint32_t sector, /* Start sector number (LBA) */ + rt_uint8_t count /* Sector count (1..255) */ +) +{ + if (drv || !count) return RES_PARERR; + if (Stat & STA_NOINIT) return RES_NOTRDY; + if (Stat & STA_PROTECT) return RES_WRPRT; + + if (!(CardType & 4)) sector *= 512; /* Convert to byte address if needed */ + + SELECT(); /* CS = L */ + + if (count == 1) { /* Single block write */ + if ((send_cmd(CMD24, sector) == 0) /* WRITE_BLOCK */ + && xmit_datablock(buff, 0xFE)) + count = 0; + } + else { /* Multiple block write */ + if (CardType & 2) { + send_cmd(CMD55, 0); send_cmd(CMD23, count); /* ACMD23 */ + } + if (send_cmd(CMD25, sector) == 0) { /* WRITE_MULTIPLE_BLOCK */ + do { + if (!xmit_datablock(buff, 0xFC)) break; + buff += 512; + } while (--count); + if (!xmit_datablock(0, 0xFD)) /* STOP_TRAN token */ + count = 1; + } + } + + DESELECT(); /* CS = H */ + rcvr_spi(); /* Idle (Release DO) */ + + return count ? RES_ERROR : RES_OK; +} +#endif /* _READONLY */ + + + +/*-----------------------------------------------------------------------*/ +/* Miscellaneous Functions */ +/*-----------------------------------------------------------------------*/ +static +DRESULT sdcard_ioctl ( + rt_uint8_t drv, /* Physical drive nmuber (0) */ + rt_uint8_t ctrl, /* Control code */ + void *buff /* Buffer to send/receive control data */ +) +{ + DRESULT res; + rt_uint8_t n, csd[16], *ptr = buff; + rt_uint16_t csize; + + + if (drv) return RES_PARERR; + + res = RES_ERROR; + + if (ctrl == CTRL_POWER) { + switch (*ptr) { + case 0: /* Sub control code == 0 (POWER_OFF) */ + if (chk_power()) + power_off(); /* Power off */ + res = RES_OK; + break; + case 1: /* Sub control code == 1 (POWER_ON) */ + power_on(); /* Power on */ + res = RES_OK; + break; + case 2: /* Sub control code == 2 (POWER_GET) */ + *(ptr+1) = (rt_uint8_t)chk_power(); + res = RES_OK; + break; + default : + res = RES_PARERR; + } + } + else { + if (Stat & STA_NOINIT) return RES_NOTRDY; + + SELECT(); /* CS = L */ + + switch (ctrl) { + case GET_SECTOR_COUNT : /* Get number of sectors on the disk (rt_uint32_t) */ + if ((send_cmd(CMD9, 0) == 0) && rcvr_datablock(csd, 16)) { + if ((csd[0] >> 6) == 1) { /* SDC ver 2.00 */ + csize = csd[9] + ((rt_uint16_t)csd[8] << 8) + 1; + *(rt_uint32_t*)buff = (rt_uint32_t)csize << 10; + } else { /* MMC or SDC ver 1.XX */ + n = (csd[5] & 15) + ((csd[10] & 128) >> 7) + ((csd[9] & 3) << 1) + 2; + csize = (csd[8] >> 6) + ((rt_uint16_t)csd[7] << 2) + ((rt_uint16_t)(csd[6] & 3) << 10) + 1; + *(rt_uint32_t*)buff = (rt_uint32_t)csize << (n - 9); + } + res = RES_OK; + } + break; + + case GET_SECTOR_SIZE : /* Get sectors on the disk (rt_uint16_t) */ + *(rt_uint16_t*)buff = 512; + res = RES_OK; + break; + + case CTRL_SYNC : /* Make sure that data has been written */ + if (wait_ready() == 0xFF) + res = RES_OK; + break; + + case MMC_GET_CSD : /* Receive CSD as a data block (16 bytes) */ + if (send_cmd(CMD9, 0) == 0 /* READ_CSD */ + && rcvr_datablock(ptr, 16)) + res = RES_OK; + break; + + case MMC_GET_CID : /* Receive CID as a data block (16 bytes) */ + if (send_cmd(CMD10, 0) == 0 /* READ_CID */ + && rcvr_datablock(ptr, 16)) + res = RES_OK; + break; + + case MMC_GET_OCR : /* Receive OCR as an R3 resp (4 bytes) */ + if (send_cmd(CMD58, 0) == 0) { /* READ_OCR */ + for (n = 0; n < 4; n++) + *ptr++ = rcvr_spi(); + res = RES_OK; + } + +// case MMC_GET_TYPE : /* Get card type flags (1 byte) */ +// *ptr = CardType; +// res = RES_OK; +// break; + + default: + res = RES_PARERR; + } + + DESELECT(); /* CS = H */ + rcvr_spi(); /* Idle (Release DO) */ + } + + return res; +} + +/* + * RT-Thread SD Card Driver + * 20090705 Yi.Qiu + */ +#include +#include + +struct rt_device sdcard_device; +struct dfs_partition part; + +/* RT-Thread Device Driver Interface */ +static rt_err_t rt_sdcard_init(rt_device_t dev) +{ + return RT_EOK; +} + +static rt_err_t rt_sdcard_open(rt_device_t dev, rt_uint16_t oflag) +{ + + return RT_EOK; +} + +static rt_err_t rt_sdcard_close(rt_device_t dev) +{ + return RT_EOK; +} + +static rt_size_t rt_sdcard_read(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size) +{ + DRESULT status; + + status = sdcard_read(0, buffer, part.offset + pos, size); + if (status != RES_OK) + { + rt_kprintf("sd card read failed\n"); + return 0; + } + + return size; +} + +static rt_size_t rt_sdcard_write (rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size) +{ + DRESULT status; + + status = sdcard_write(0, buffer, part.offset + pos, size); + if (status != RES_OK) + { + rt_kprintf("sd card write failed\n"); + return 0; + } + + return size; +} + +static rt_err_t rt_sdcard_control(rt_device_t dev, rt_uint8_t cmd, void *args) +{ + return RT_EOK; +} + +void rt_hw_sdcard_init(void) +{ + if (sdcard_initialize(0) == RES_OK) + { + DRESULT status; + rt_uint8_t *sector; + + /* get the first sector to read partition table */ + sector = (rt_uint8_t*) rt_malloc (512); + if (sector == RT_NULL) + { + rt_kprintf("allocate partition sector buffer failed\n"); + return; + } + status = sdcard_read(0, sector, 0, 1); + if (status == RES_OK) + { + /* get the first partition */ + if (dfs_filesystem_get_partition(&part, sector, 0) != 0) + { + /* there is no partition */ + part.offset = 0; + part.size = 0; + } + } + else + { + /* there is no partition table */ + part.offset = 0; + part.size = 0; + } + + /* release sector buffer */ + rt_free(sector); + + /* register sdcard device */ + sdcard_device.type = RT_Device_Class_Block; + sdcard_device.init = rt_sdcard_init; + sdcard_device.open = rt_sdcard_open; + sdcard_device.close = rt_sdcard_close; + sdcard_device.read = rt_sdcard_read; + sdcard_device.write = rt_sdcard_write; + sdcard_device.control = rt_sdcard_control; + + /* no private */ + sdcard_device.user_data = RT_NULL; + + rt_device_register(&sdcard_device, "sd0", + RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_REMOVABLE | RT_DEVICE_FLAG_STANDALONE); + + return; + } + rt_kprintf("sdcard init failed\n"); +} + diff --git a/bsp/lm3s_9b9x/startup.c b/bsp/lm3s_9b9x/startup.c new file mode 100644 index 0000000000000000000000000000000000000000..5f74e3e4268051db8637922932a5d040c8515164 --- /dev/null +++ b/bsp/lm3s_9b9x/startup.c @@ -0,0 +1,151 @@ +/* + * File : startup.c + * This file is part of RT-Thread RTOS + * COPYRIGHT (C) 2006, RT-Thread Develop Team + * + * The license and distribution terms for this file may be + * found in the file LICENSE in this distribution or at + * http://openlab.rt-thread.com/license/LICENSE + * + * Change Logs: + * Date Author Notes + * 2006-08-31 Bernard first implementation + */ + +#include +#include + +#include "board.h" + +#ifdef RT_USING_LWIP +#include +#include +#endif + +/** + * @addtogroup LM3S + */ + +extern void rt_hw_serial_init(void); + +/*@{*/ +#ifdef RT_USING_FINSH +extern void finsh_system_init(void); +extern void finsh_set_device(char* device); +#endif + +extern int rt_application_init(void); +extern void rt_hw_sdcard_init(void); +extern int rt_hw_luminaryif_init(void); + +#ifdef __CC_ARM +extern int Image$$RW_IRAM1$$ZI$$Limit; +#elif __ICCARM__ +#pragma section="HEAP" +#else +extern int __bss_end; +#endif + +#ifdef DEBUG +/******************************************************************************* +* Function Name : assert_failed +* Description : Reports the name of the source file and the source line number +* where the assert error has occurred. +* Input : - file: pointer to the source file name +* - line: assert error line source number +* Output : None +* Return : None +*******************************************************************************/ +void assert_failed(u8* file, u32 line) +{ + rt_kprintf("\n\r Wrong parameter value detected on\r\n"); + rt_kprintf(" file %s\r\n", file); + rt_kprintf(" line %d\r\n", line); + + while (1) ; +} +#endif + +/** + * This function will startup RT-Thread RTOS. + */ +void rtthread_startup(void) +{ + /* init board */ + rt_hw_board_init(); + + /* show version */ + rt_show_version(); + + /* init tick */ + rt_system_tick_init(); + + /* init kernel object */ + rt_system_object_init(); + + /* init timer system */ + rt_system_timer_init(); + +#ifdef RT_USING_HEAP +#ifdef __CC_ARM + rt_system_heap_init((void*)&Image$$RW_IRAM1$$ZI$$Limit, (void*)LM3S_SRAM_END); +#elif __ICCARM__ + rt_system_heap_init(__segment_end("HEAP"), (void*)LM3S_SRAM_END); +#else + /* init memory system */ + rt_system_heap_init((void*)&__bss_end, (void*)LM3S_SRAM_END); +#endif +#endif + + /* init scheduler system */ + rt_system_scheduler_init(); + +#ifdef RT_USING_LWIP + eth_system_device_init(); + + /* register ethernetif device */ + rt_hw_luminaryif_init(); +#endif + + /* init hardware serial device */ + rt_hw_serial_init(); +#ifdef RT_USING_DFS + /* init sd card device */ + rt_hw_sdcard_init(); +#endif + /* init all device */ + rt_device_init_all(); + + /* init application */ + rt_application_init(); + +#ifdef RT_USING_FINSH + /* init finsh */ + finsh_system_init(); +#ifdef RT_USING_DEVICE + finsh_set_device("uart1"); +#endif +#endif + + /* init idle thread */ + rt_thread_idle_init(); + + /* start scheduler */ + rt_system_scheduler_start(); + + /* never reach here */ + return ; +} + +int main(void) +{ + rt_uint32_t level UNUSED; + + /* disable interrupt first */ + level = rt_hw_interrupt_disable(); + rtthread_startup(); + + return 0; +} + +/*@}*/ diff --git a/bsp/lm3s_9b9x/template.Uv2 b/bsp/lm3s_9b9x/template.Uv2 new file mode 100644 index 0000000000000000000000000000000000000000..a46bbe6f4c6770b2f9771070af2708f8be1421db --- /dev/null +++ b/bsp/lm3s_9b9x/template.Uv2 @@ -0,0 +1,98 @@ +### uVision2 Project, (C) Keil Software +### Do not modify ! + +Target (RT-Thread-lm3s), 0x0004 // Tools: 'ARM-ADS' + + + + +Options 1,0,0 // Target 'RT-Thread-lm3s' + Device (LM3S8962) + Vendor (Luminary Micro) + Cpu (IRAM(0x20000000-0x2000FFFF) IROM(0-0x3FFFF) CLOCK(8000000) CPUTYPE("Cortex-M3")) + FlashUt () + StupF ("STARTUP\Luminary\Startup.s" ("Luminary Startup Code")) + FlashDR (UL2CM3(-UU0101L5E -O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FD20000000 -FC800 -FN1 -FF0LM3S_256 -FS00 -FL040000)) + DevID (4285) + Rgf (LM3Sxxx.H) + Mem () + C () + A () + RL () + OH () + DBC_IFX () + DBC_CMS () + DBC_AMS () + DBC_LMS () + UseEnv=0 + EnvBin () + EnvInc () + EnvLib () + EnvReg (Luminary\) + OrgReg (Luminary\) + TgStat=16 + OutDir (.\objs\) + OutName (rtthread-lm3s) + GenApp=1 + GenLib=0 + GenHex=0 + Debug=1 + Browse=1 + LstDir (.\objs\) + HexSel=1 + MG32K=0 + TGMORE=0 + RunUsr 0 0 <> + RunUsr 1 0 <> + BrunUsr 0 0 <> + BrunUsr 1 0 <> + CrunUsr 0 0 <> + CrunUsr 1 0 <> + SVCSID <> + GLFLAGS=1790 + ADSFLGA { 243,31,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } + ACPUTYP ("Cortex-M3") + RVDEV () + ADSTFLGA { 0,12,0,0,160,0,0,66,0,0,0,0,0,0,0,0,0,0,0,0 } + OCMADSOCM { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } + OCMADSIRAM { 0,0,0,0,32,0,0,1,0 } + OCMADSIROM { 1,0,0,0,0,0,0,4,0 } + OCMADSXRAM { 0,0,0,0,0,0,0,0,0 } + OCR_RVCT { 1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,4,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,32,0,0,1,0,0,0,0,0,0,0,0,0,0 } + RV_STAVEC () + ADSCCFLG { 5,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } + ADSCMISC () + ADSCDEFN () + ADSCUDEF () + ADSCINCD () + ADSASFLG { 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } + ADSAMISC () + ADSADEFN () + ADSAUDEF () + ADSAINCD () + PropFld { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } + IncBld=1 + AlwaysBuild=0 + GenAsm=0 + AsmAsm=0 + PublicsOnly=0 + StopCode=3 + CustArgs () + LibMods () + ADSLDFG { 17,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } + ADSLDTA (0x00000000) + ADSLDDA (0x00000000) + ADSLDSC () + ADSLDIB () + ADSLDIC () + ADSLDMC () + ADSLDIF () + ADSLDDW () + OPTDL (SARMCM3.DLL)()(DLM.DLL)(-pLM3S8962)(SARMCM3.DLL)()(TLM.DLL)(-pLM3S8962) + OPTDBG 48118,4,()()()()()()()()()() (BIN\lmidk-agdi.dll)()()() + FLASH1 { 1,0,0,0,1,0,0,0,3,16,0,0,0,0,0,0,0,0,0,0 } + FLASH2 (BIN\lmidk-agdi.dll) + FLASH3 () + FLASH4 () +EndOpt +