diff --git a/bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/Release_Notes.html b/bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/Release_Notes.html new file mode 100644 index 0000000000000000000000000000000000000000..b80f38df1cace2d8ef9f127285850ea813d953b5 --- /dev/null +++ b/bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/Release_Notes.html @@ -0,0 +1,284 @@ + + + + + + + + + + + + +Release Notes for STM32F10x CMSIS + + + + + +
+


+

+
+ + + + + + +
+ + + + + + + + + +
Back to Release page
+

Release +Notes for STM32F10x CMSIS

+

Copyright 2011 STMicroelectronics

+

+
+

 

+ + + + + + +
+

Contents

+
    +
  1. STM32F10x CMSIS +update History
    2. +
  2. License
    3. +
+ +

STM32F10x CMSIS +update History


+

V3.5.0 / 11-March-2011

+

Main +Changes

+ +
    +
  • stm32f10x.h +and startup_stm32f10x_hd_vl.s files: remove the FSMC interrupt +definition for STM32F10x High-density Value line devices.
    +
    • +
  • system_stm32f10x.c file provided within the CMSIS folder.
    +
    • + +
+ +

3.4.0 +- 10/15/2010

+ +
    +
  1. General
    2. +
+ +
    +
  • Add support +for STM32F10x High-density Value line devices.
    • +
+
    +
  1. STM32F10x CMSIS Device Peripheral Access Layer
    2. +
+ + + +
    +
  • STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer Header File: stm32f10x.h
    +
    • Update to support High-density Value line devices
      • Add new define STM32F10X_HD_VL
        • +
      • RCC, AFIO, FSMC bits definition updated
        • +
      +
    • + + All +STM32 devices definitions are commented by default. User has to select the +appropriate device before starting else an error will be signaled on compile +time.
      • +
    • Add new IRQs definitons inside the IRQn_Type enumeration for STM23 High-density Value line devices.
      • +
    • "bool" type removed.
      +
      • +
  • STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer System Files: system_stm32f10x.h and system_stm32f10x.c
    +
    • +
      +
    • "system_stm32f10x.c" moved to to "STM32F10x_StdPeriph_Template" directory. This file is also moved to each example directory under "STM32F10x_StdPeriph_Examples".
      +
      • +
    • SystemInit_ExtMemCtl() function: update to support High-density Value line devices.
      • +
    • Add "VECT_TAB_SRAM" inside "system_stm32f10x.c" +to select if the user want to place the Vector Table in internal SRAM. +An additional define is also to specify the Vector Table offset "VECT_TAB_OFFSET".
      +
      • + +
    +
  • STM32F10x CMSIS startup files:startup_stm32f10x_xx.s
    • Add three +startup files for STM32 High-density Value line devices: + startup_stm32f10x_hd_vl.s
    +
+

3.3.0 +- 04/16/2010

+ +
  1. General
+
  • Add support +for STM32F10x XL-density devices.
  • Add startup files for TrueSTUDIO toolchain
  1. STM32F10x CMSIS Device Peripheral Access Layer
+ +
  • STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer Header File: stm32f10x.h
    +
    • Update to support XL-density devices
      • Add new define STM32F10X_XL
      • Add new IRQs for TIM9..14
      • Update FLASH_TypeDef structure
      • Add new IP instances TIM9..14
      • RCC, AFIO, DBGMCU bits definition updated
    • Correct IRQs definition for MD-, LD-, MD_VL- and LD_VL-density devices (remove comma "," at the end of enum list)
  • STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer System Files: system_stm32f10x.h and system_stm32f10x.c
    +
    • SystemInit_ExtMemCtl() function: update to support XL-density devices
    • SystemInit() function: swap the order of SetSysClock() and SystemInit_ExtMemCtl() functions. 
      +
  • STM32F10x CMSIS startup files:
    • add three +startup files for STM32 XL-density devices: + startup_stm32f10x_xl.s
    • startup_stm32f10x_md_vl.s for RIDE7: add USART3 IRQ Handler (was missing in previous version)
    • Add startup files for TrueSTUDIO toolchain
+

3.2.0 +- 03/01/2010

+
    +
  1. General
    2. +
+
    + +
  • STM32F10x CMSIS files updated to CMSIS V1.30 release
    • +
  • Directory structure updated to be aligned with CMSIS V1.30
    +
    • +
  • Add support +for STM32 Low-density Value line (STM32F100x4/6) and +Medium-density Value line (STM32F100x8/B) devices. 
    • + +
+
    +
  1. CMSIS Core Peripheral Access Layer
+ +
    +
  1. STM32F10x CMSIS Device Peripheral Access Layer
    2. + +
+ +
    + +
  • STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer Header File: stm32f10x.h
    +
    • +
      +
    • Update +the stm32f10x.h file to support new Value line devices features: CEC +peripheral, new General purpose timers TIM15, TIM16 and TIM17.
      • +
    • Peripherals Bits definitions updated to be in line with Value line devices available features.
      +
      • +
    • HSE_Value, +HSI_Value and HSEStartup_TimeOut changed to upper case: HSE_VALUE, +HSI_VALUE and HSE_STARTUP_TIMEOUT. Old names are kept for legacy +purposes.
      +
      • +
    +
  • STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer System Files: system_stm32f10x.h and system_stm32f10x.c
    +
    • +
      +
    • SystemFrequency variable name changed to SystemCoreClock
      +
      • +
    • Default + SystemCoreClock is changed to 24MHz when Value line devices are selected and to 72MHz on other devices.
      +
      • +
    • All while(1) loop were removed from all clock setting functions. User has to handle the HSE startup failure.
      +
      • +
    • Additional function void SystemCoreClockUpdate (void) is provided.
      +
      • +
    +
  • STM32F10x CMSIS Startup files: startup_stm32f10x_xx.s
    • +
      +
    • Add new +startup files for STM32 Low-density Value line devices: + startup_stm32f10x_ld_vl.s
      • +
    • Add new startup +files for STM32 Medium-density Value line devices: + startup_stm32f10x_md_vl.s
      • +
    • SystemInit() function is called from startup file (startup_stm32f10x_xx.s) before to branch to application main.
      +To reconfigure the default setting of SystemInit() function, refer to system_stm32f10x.c file
      +
      • +
    • GNU startup file for Low density devices (startup_stm32f10x_ld.s) is updated to fix compilation errors.
      +
      • +
    + +
+ +
    +
+

License

+

The +enclosed firmware and all the related documentation are not covered by +a License Agreement, if you need such License you can contact your +local STMicroelectronics office.

+

THE +PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS +WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO +SAVE TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR +ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY +CLAIMS ARISING FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY +CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH +THEIR PRODUCTS.

+

 

+
+
+

For +complete documentation on STM32(CORTEX M3) 32-Bit Microcontrollers +visit www.st.com/STM32

+
+

+
+
+

 

+
+ \ No newline at end of file diff --git a/bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/system_stm32f10x.c b/bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/system_stm32f10x.c new file mode 100644 index 0000000000000000000000000000000000000000..6fb4579ec804e799132b5587a10d980a573916bb --- /dev/null +++ b/bsp/stm32f107/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/system_stm32f10x.c @@ -0,0 +1,1094 @@ +/** + ****************************************************************************** + * @file system_stm32f10x.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File. + * + * 1. This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): Setups the system clock (System clock source, PLL Multiplier + * factors, AHB/APBx prescalers and Flash settings). + * This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32f10x_xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * 2. After each device reset the HSI (8 MHz) is used as system clock source. + * Then SystemInit() function is called, in "startup_stm32f10x_xx.s" file, to + * configure the system clock before to branch to main program. + * + * 3. If the system clock source selected by user fails to startup, the SystemInit() + * function will do nothing and HSI still used as system clock source. User can + * add some code to deal with this issue inside the SetSysClock() function. + * + * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depedning on + * the product used), refer to "HSE_VALUE" define in "stm32f10x.h" file. + * When HSE is used as system clock source, directly or through PLL, and you + * are using different crystal you have to adapt the HSE value to your own + * configuration. + * + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f10x_system + * @{ + */ + +/** @addtogroup STM32F10x_System_Private_Includes + * @{ + */ + +#include "stm32f10x.h" + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_Defines + * @{ + */ + +/*!< Uncomment the line corresponding to the desired System clock (SYSCLK) + frequency (after reset the HSI is used as SYSCLK source) + + IMPORTANT NOTE: + ============== + 1. After each device reset the HSI is used as System clock source. + + 2. Please make sure that the selected System clock doesn't exceed your device's + maximum frequency. + + 3. If none of the define below is enabled, the HSI is used as System clock + source. + + 4. The System clock configuration functions provided within this file assume that: + - For Low, Medium and High density Value line devices an external 8MHz + crystal is used to drive the System clock. + - For Low, Medium and High density devices an external 8MHz crystal is + used to drive the System clock. + - For Connectivity line devices an external 25MHz crystal is used to drive + the System clock. + If you are using different crystal you have to adapt those functions accordingly. + */ + +#if defined (STM32F10X_LD_VL) || (defined STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) +/* #define SYSCLK_FREQ_HSE HSE_VALUE */ + #define SYSCLK_FREQ_24MHz 24000000 +#else +/* #define SYSCLK_FREQ_HSE HSE_VALUE */ +/* #define SYSCLK_FREQ_24MHz 24000000 */ +/* #define SYSCLK_FREQ_36MHz 36000000 */ +/* #define SYSCLK_FREQ_48MHz 48000000 */ +/* #define SYSCLK_FREQ_56MHz 56000000 */ +#define SYSCLK_FREQ_72MHz 72000000 +#endif + +/*!< Uncomment the following line if you need to use external SRAM mounted + on STM3210E-EVAL board (STM32 High density and XL-density devices) or on + STM32100E-EVAL board (STM32 High-density value line devices) as data memory */ +#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL) +/* #define DATA_IN_ExtSRAM */ +#endif + +/*!< Uncomment the following line if you need to relocate your vector Table in + Internal SRAM. */ +/* #define VECT_TAB_SRAM */ +#define VECT_TAB_OFFSET 0x0 /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ + + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_Variables + * @{ + */ + +/******************************************************************************* +* Clock Definitions +*******************************************************************************/ +#ifdef SYSCLK_FREQ_HSE + uint32_t SystemCoreClock = SYSCLK_FREQ_HSE; /*!< System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_24MHz + uint32_t SystemCoreClock = SYSCLK_FREQ_24MHz; /*!< System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_36MHz + uint32_t SystemCoreClock = SYSCLK_FREQ_36MHz; /*!< System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_48MHz + uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz; /*!< System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_56MHz + uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz; /*!< System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_72MHz + uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz; /*!< System Clock Frequency (Core Clock) */ +#else /*!< HSI Selected as System Clock source */ + uint32_t SystemCoreClock = HSI_VALUE; /*!< System Clock Frequency (Core Clock) */ +#endif + +__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_FunctionPrototypes + * @{ + */ + +static void SetSysClock(void); + +#ifdef SYSCLK_FREQ_HSE + static void SetSysClockToHSE(void); +#elif defined SYSCLK_FREQ_24MHz + static void SetSysClockTo24(void); +#elif defined SYSCLK_FREQ_36MHz + static void SetSysClockTo36(void); +#elif defined SYSCLK_FREQ_48MHz + static void SetSysClockTo48(void); +#elif defined SYSCLK_FREQ_56MHz + static void SetSysClockTo56(void); +#elif defined SYSCLK_FREQ_72MHz + static void SetSysClockTo72(void); +#endif + +#ifdef DATA_IN_ExtSRAM + static void SystemInit_ExtMemCtl(void); +#endif /* DATA_IN_ExtSRAM */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system + * Initialize the Embedded Flash Interface, the PLL and update the + * SystemCoreClock variable. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +void SystemInit (void) +{ + /* Reset the RCC clock configuration to the default reset state(for debug purpose) */ + /* Set HSION bit */ + RCC->CR |= (uint32_t)0x00000001; + + /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */ +#ifndef STM32F10X_CL + RCC->CFGR &= (uint32_t)0xF8FF0000; +#else + RCC->CFGR &= (uint32_t)0xF0FF0000; +#endif /* STM32F10X_CL */ + + /* Reset HSEON, CSSON and PLLON bits */ + RCC->CR &= (uint32_t)0xFEF6FFFF; + + /* Reset HSEBYP bit */ + RCC->CR &= (uint32_t)0xFFFBFFFF; + + /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */ + RCC->CFGR &= (uint32_t)0xFF80FFFF; + +#ifdef STM32F10X_CL + /* Reset PLL2ON and PLL3ON bits */ + RCC->CR &= (uint32_t)0xEBFFFFFF; + + /* Disable all interrupts and clear pending bits */ + RCC->CIR = 0x00FF0000; + + /* Reset CFGR2 register */ + RCC->CFGR2 = 0x00000000; +#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) + /* Disable all interrupts and clear pending bits */ + RCC->CIR = 0x009F0000; + + /* Reset CFGR2 register */ + RCC->CFGR2 = 0x00000000; +#else + /* Disable all interrupts and clear pending bits */ + RCC->CIR = 0x009F0000; +#endif /* STM32F10X_CL */ + +#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL) + #ifdef DATA_IN_ExtSRAM + SystemInit_ExtMemCtl(); + #endif /* DATA_IN_ExtSRAM */ +#endif + + /* Configure the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers */ + /* Configure the Flash Latency cycles and enable prefetch buffer */ + SetSysClock(); + +#ifdef VECT_TAB_SRAM + SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */ +#else + SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */ +#endif +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) + * or HSI_VALUE(*) multiplied by the PLL factors. + * + * (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value + * 8 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value + * 8 MHz or 25 MHz, depedning on the product used), user has to ensure + * that HSE_VALUE is same as the real frequency of the crystal used. + * Otherwise, this function may have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * @param None + * @retval None + */ +void SystemCoreClockUpdate (void) +{ + uint32_t tmp = 0, pllmull = 0, pllsource = 0; + +#ifdef STM32F10X_CL + uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0; +#endif /* STM32F10X_CL */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) + uint32_t prediv1factor = 0; +#endif /* STM32F10X_LD_VL or STM32F10X_MD_VL or STM32F10X_HD_VL */ + + /* Get SYSCLK source -------------------------------------------------------*/ + tmp = RCC->CFGR & RCC_CFGR_SWS; + + switch (tmp) + { + case 0x00: /* HSI used as system clock */ + SystemCoreClock = HSI_VALUE; + break; + case 0x04: /* HSE used as system clock */ + SystemCoreClock = HSE_VALUE; + break; + case 0x08: /* PLL used as system clock */ + + /* Get PLL clock source and multiplication factor ----------------------*/ + pllmull = RCC->CFGR & RCC_CFGR_PLLMULL; + pllsource = RCC->CFGR & RCC_CFGR_PLLSRC; + +#ifndef STM32F10X_CL + pllmull = ( pllmull >> 18) + 2; + + if (pllsource == 0x00) + { + /* HSI oscillator clock divided by 2 selected as PLL clock entry */ + SystemCoreClock = (HSI_VALUE >> 1) * pllmull; + } + else + { + #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) + prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1; + /* HSE oscillator clock selected as PREDIV1 clock entry */ + SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; + #else + /* HSE selected as PLL clock entry */ + if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET) + {/* HSE oscillator clock divided by 2 */ + SystemCoreClock = (HSE_VALUE >> 1) * pllmull; + } + else + { + SystemCoreClock = HSE_VALUE * pllmull; + } + #endif + } +#else + pllmull = pllmull >> 18; + + if (pllmull != 0x0D) + { + pllmull += 2; + } + else + { /* PLL multiplication factor = PLL input clock * 6.5 */ + pllmull = 13 / 2; + } + + if (pllsource == 0x00) + { + /* HSI oscillator clock divided by 2 selected as PLL clock entry */ + SystemCoreClock = (HSI_VALUE >> 1) * pllmull; + } + else + {/* PREDIV1 selected as PLL clock entry */ + + /* Get PREDIV1 clock source and division factor */ + prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC; + prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1; + + if (prediv1source == 0) + { + /* HSE oscillator clock selected as PREDIV1 clock entry */ + SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; + } + else + {/* PLL2 clock selected as PREDIV1 clock entry */ + + /* Get PREDIV2 division factor and PLL2 multiplication factor */ + prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4) + 1; + pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8 ) + 2; + SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull; + } + } +#endif /* STM32F10X_CL */ + break; + + default: + SystemCoreClock = HSI_VALUE; + break; + } + + /* Compute HCLK clock frequency ----------------*/ + /* Get HCLK prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; + /* HCLK clock frequency */ + SystemCoreClock >>= tmp; +} + +/** + * @brief Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers. + * @param None + * @retval None + */ +static void SetSysClock(void) +{ +#ifdef SYSCLK_FREQ_HSE + SetSysClockToHSE(); +#elif defined SYSCLK_FREQ_24MHz + SetSysClockTo24(); +#elif defined SYSCLK_FREQ_36MHz + SetSysClockTo36(); +#elif defined SYSCLK_FREQ_48MHz + SetSysClockTo48(); +#elif defined SYSCLK_FREQ_56MHz + SetSysClockTo56(); +#elif defined SYSCLK_FREQ_72MHz + SetSysClockTo72(); +#endif + + /* If none of the define above is enabled, the HSI is used as System clock + source (default after reset) */ +} + +/** + * @brief Setup the external memory controller. Called in startup_stm32f10x.s + * before jump to __main + * @param None + * @retval None + */ +#ifdef DATA_IN_ExtSRAM +/** + * @brief Setup the external memory controller. + * Called in startup_stm32f10x_xx.s/.c before jump to main. + * This function configures the external SRAM mounted on STM3210E-EVAL + * board (STM32 High density devices). This SRAM will be used as program + * data memory (including heap and stack). + * @param None + * @retval None + */ +void SystemInit_ExtMemCtl(void) +{ +/*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is + required, then adjust the Register Addresses */ + + /* Enable FSMC clock */ + RCC->AHBENR = 0x00000114; + + /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */ + RCC->APB2ENR = 0x000001E0; + +/* --------------- SRAM Data lines, NOE and NWE configuration ---------------*/ +/*---------------- SRAM Address lines configuration -------------------------*/ +/*---------------- NOE and NWE configuration --------------------------------*/ +/*---------------- NE3 configuration ----------------------------------------*/ +/*---------------- NBL0, NBL1 configuration ---------------------------------*/ + + GPIOD->CRL = 0x44BB44BB; + GPIOD->CRH = 0xBBBBBBBB; + + GPIOE->CRL = 0xB44444BB; + GPIOE->CRH = 0xBBBBBBBB; + + GPIOF->CRL = 0x44BBBBBB; + GPIOF->CRH = 0xBBBB4444; + + GPIOG->CRL = 0x44BBBBBB; + GPIOG->CRH = 0x44444B44; + +/*---------------- FSMC Configuration ---------------------------------------*/ +/*---------------- Enable FSMC Bank1_SRAM Bank ------------------------------*/ + + FSMC_Bank1->BTCR[4] = 0x00001011; + FSMC_Bank1->BTCR[5] = 0x00000200; +} +#endif /* DATA_IN_ExtSRAM */ + +#ifdef SYSCLK_FREQ_HSE +/** + * @brief Selects HSE as System clock source and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockToHSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + +#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 0 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + +#ifndef STM32F10X_CL + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0; +#else + if (HSE_VALUE <= 24000000) + { + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0; + } + else + { + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1; + } +#endif /* STM32F10X_CL */ +#endif + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; + + /* Select HSE as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_HSE; + + /* Wait till HSE is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x04) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} +#elif defined SYSCLK_FREQ_24MHz +/** + * @brief Sets System clock frequency to 24MHz and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockTo24(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { +#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 0 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0; +#endif + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; + +#ifdef STM32F10X_CL + /* Configure PLLs ------------------------------------------------------*/ + /* PLL configuration: PLLCLK = PREDIV1 * 6 = 24 MHz */ + RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | + RCC_CFGR_PLLMULL6); + + /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ + /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */ + RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | + RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); + RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | + RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10); + + /* Enable PLL2 */ + RCC->CR |= RCC_CR_PLL2ON; + /* Wait till PLL2 is ready */ + while((RCC->CR & RCC_CR_PLL2RDY) == 0) + { + } +#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + /* PLL configuration: = (HSE / 2) * 6 = 24 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_PREDIV1 | RCC_CFGR_PLLXTPRE_PREDIV1_Div2 | RCC_CFGR_PLLMULL6); +#else + /* PLL configuration: = (HSE / 2) * 6 = 24 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL6); +#endif /* STM32F10X_CL */ + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} +#elif defined SYSCLK_FREQ_36MHz +/** + * @brief Sets System clock frequency to 36MHz and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockTo36(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 1 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1; + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; + +#ifdef STM32F10X_CL + /* Configure PLLs ------------------------------------------------------*/ + + /* PLL configuration: PLLCLK = PREDIV1 * 9 = 36 MHz */ + RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | + RCC_CFGR_PLLMULL9); + + /*!< PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ + /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */ + + RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | + RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); + RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | + RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10); + + /* Enable PLL2 */ + RCC->CR |= RCC_CR_PLL2ON; + /* Wait till PLL2 is ready */ + while((RCC->CR & RCC_CR_PLL2RDY) == 0) + { + } + +#else + /* PLL configuration: PLLCLK = (HSE / 2) * 9 = 36 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL9); +#endif /* STM32F10X_CL */ + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} +#elif defined SYSCLK_FREQ_48MHz +/** + * @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockTo48(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 1 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1; + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; + +#ifdef STM32F10X_CL + /* Configure PLLs ------------------------------------------------------*/ + /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ + /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */ + + RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | + RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); + RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | + RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5); + + /* Enable PLL2 */ + RCC->CR |= RCC_CR_PLL2ON; + /* Wait till PLL2 is ready */ + while((RCC->CR & RCC_CR_PLL2RDY) == 0) + { + } + + + /* PLL configuration: PLLCLK = PREDIV1 * 6 = 48 MHz */ + RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | + RCC_CFGR_PLLMULL6); +#else + /* PLL configuration: PLLCLK = HSE * 6 = 48 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL6); +#endif /* STM32F10X_CL */ + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} + +#elif defined SYSCLK_FREQ_56MHz +/** + * @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockTo56(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 2 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2; + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; + +#ifdef STM32F10X_CL + /* Configure PLLs ------------------------------------------------------*/ + /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ + /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */ + + RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | + RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); + RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | + RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5); + + /* Enable PLL2 */ + RCC->CR |= RCC_CR_PLL2ON; + /* Wait till PLL2 is ready */ + while((RCC->CR & RCC_CR_PLL2RDY) == 0) + { + } + + + /* PLL configuration: PLLCLK = PREDIV1 * 7 = 56 MHz */ + RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | + RCC_CFGR_PLLMULL7); +#else + /* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL7); + +#endif /* STM32F10X_CL */ + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} + +#elif defined SYSCLK_FREQ_72MHz +/** + * @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockTo72(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 2 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2; + + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; + +#ifdef STM32F10X_CL + /* Configure PLLs ------------------------------------------------------*/ + /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ + /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */ + + RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | + RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); + RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | + RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5); + + /* Enable PLL2 */ + RCC->CR |= RCC_CR_PLL2ON; + /* Wait till PLL2 is ready */ + while((RCC->CR & RCC_CR_PLL2RDY) == 0) + { + } + + + /* PLL configuration: PLLCLK = PREDIV1 * 9 = 72 MHz */ + RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | + RCC_CFGR_PLLMULL9); +#else + /* PLL configuration: PLLCLK = HSE * 9 = 72 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | + RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL9); +#endif /* STM32F10X_CL */ + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} +#endif + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/Release_Notes.html b/bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/Release_Notes.html new file mode 100644 index 0000000000000000000000000000000000000000..633e42e35edab2cdf33ee38a40243aaf36de2d0e --- /dev/null +++ b/bsp/stm32f107/Libraries/STM32F10x_StdPeriph_Driver/Release_Notes.html @@ -0,0 +1,342 @@ + + + + + + + + + + + + +Release Notes for STM32F10x Standard Peripherals Library Drivers + + + + + +
+


+

+
+ + + + + + +
+ + + + + + + + + +
Back to Release page
+

Release +Notes for STM32F10x Standard Peripherals Library Drivers +(StdPeriph_Driver)

+

Copyright 2011 STMicroelectronics

+

+
+

 

+ + + + + + +
+

Contents

+
    +
  1. STM32F10x Standard Peripherals Library +Drivers update History
    2. +
  2. License
    3. +
+ + +

STM32F10x Standard +Peripherals Library Drivers  update History


+

V3.5.0 / 11-March-2011

+

Main +Changes

+ +
    +
  • stm32f10x_can.h/.c files:
    • +
      +
    • Add 5 new functions
      • +
        +
      • 3 +new functions controlling the counter errors: CAN_GetLastErrorCode(), +CAN_GetReceiveErrorCounter() and CAN_GetLSBTransmitErrorCounter().
        • +
      +
        +
      • 1 new function to select the CAN operating mode: CAN_OperatingModeRequest().
        • +
      +
        +
      • 1 new function to support CAN TT mode: CAN_TTComModeCmd().
        +
        • +
      +
    • CAN_TransmitStatus() function updated to support all CAN transmit intermediate states
      +
      • +
    +
  • stm32f10x_i2c.h/.c files:
    • +
      +
    • Add 1 new function:
      • +
        +
      • I2C_NACKPositionConfig(): +This function configures the same bit (POS) as I2C_PECPositionConfig() +but is intended to be used in I2C mode while I2C_PECPositionConfig() is +intended to used in SMBUS mode.
        • +
      +
    +
  • stm32f10x_tim.h/.c files:
    • +
      +
    • Change the TIM_DMABurstLength_xBytes definitions to TIM_DMABurstLength_xTansfers
      +
      • +
    + + +
+ +

3.4.0 +- 10/15/2010

+ +
    +
  1. General
    2. +
+ +
    +
  • Add support for STM32F10x High-density value line devices.
    • +
+ +
    +
  1. STM32F10x_StdPeriph_Driver
    2. +
+ + +
    + +
  • stm32f10x_bkp.h/.c
    • +
      +
    • Delete BKP registers definition from stm32f10x_bkp.c and use defines within stm32f10x.h file.
      • +
    +
  • stm32f10x_can.h/.c
    • +
      +
    • Delete CAN registers definition from stm32f10x_can.c and use defines within stm32f10x.h file.
      +
      • +
    • Update the wording of some defines and Asserts macro.
      +
      • +
    • CAN_GetFlagStatus() +and CAN_ClearFlag() functions: updated to support new flags (were not +supported in previous version). These flags are:  CAN_FLAG_RQCP0, +CAN_FLAG_RQCP1, CAN_FLAG_RQCP2, CAN_FLAG_FMP1, CAN_FLAG_FF1, +CAN_FLAG_FOV1, CAN_FLAG_FMP0, CAN_FLAG_FF0,   CAN_FLAG_FOV0, +CAN_FLAG_WKU, CAN_FLAG_SLAK and CAN_FLAG_LEC.
      +
      • +
    • CAN_GetITStatus() +function: add a check of the interrupt enable bit before getting the +status of corresponding interrupt pending bit.
      +
      • +
    • CAN_ClearITPendingBit() function: correct the procedure to clear the interrupt pending bit.
      +
      • +
    +
  • stm32f10x_crc.h/.c
    • +
      +
    • Delete CRC registers definition from stm32f10x_crc.c and use defines within stm32f10x.h file.
      • +
    +
  • stm32f10x_dac.h/.c
    • +
      +
    • Delete DAC registers definition from stm32f10x_dac.c and use defines within stm32f10x.h file.
      • +
    +
  • stm32f10x_dbgmcu.h/.c
    • +
      +
    • Delete DBGMCU registers definition from stm32f10x_dbgmcu.c and use defines within stm32f10x.h file.
      • +
    +
  • stm32f10x_dma.h/.c
    • +
      +
    • Delete DMA registers definition from stm32f10x_dma.c and use defines within stm32f10x.h file.
      • +
    • Add new function "void DMA_SetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx, uint16_t DataNumber);"
      +
      • +
    +
  • stm32f10x_flash.h/.c
    • +
      +
    • FLASH functions (Erase and Program) updated to always clear the "PG", "MER" and "PER" bits even in case of TimeOut Error.
      • +
    +
  • stm32f10x_fsmc.h/.c
    • +
      +
    • Add new member "FSMC_AsynchronousWait" in "FSMC_NORSRAMInitTypeDef" structure.
      • +
    +
  • stm32f10x_gpio.h/.c
    • +
      +
    • GPIO_PinRemapConfig() function: add new values for GPIO_Remap parameter, to support new remap for TIM6, TIM7 and DAC DMA requests, TIM12 and DAC Triggers / DMA2_Channel5 Interrupt mapping.
      • +
    +
  • stm32f10x_pwr.h/.c
    • +
      +
    • Delete PWR registers definition from stm32f10x_pwr.c and use defines within stm32f10x.h and core_cm3.h files.
      • +
    +
  • stm32f10x_rtc.h/.c
    • +
      +
    • Delete RTC registers definition from stm32f10x_rtc.c and use defines within stm32f10x.h file.
      • +
    +
  • stm32f10x_spi.h/.c
    • +
      +
    • Add new definition for I2S Audio Clock frequencies "I2S_AudioFreq_192k".
      • +
    +
  • stm32f10x_tim.h/.c
    • +
    • Add new definition for TIM Input Capture Polarity "TIM_ICPolarity_BothEdge".
    + +
+ +

3.3.0 +- 04/16/2010

+ +
  1. General
+
  • Add support for STM32F10x XL-density devices.
  • I2C driver: events description and management enhancement.
+
  1. STM32F10x_StdPeriph_Driver
+
  • stm32f10x_dbgmcu.h/.c
    • DBGMCU_Config() function: add new values DBGMCU_TIMx_STOP (x: 9..14) for DBGMCU_Periph parameter.
  • stm32f10x_flash.h/.c: +updated to support Bank2 of XL-density devices (up to 1MByte of Flash +memory). For more details, refer to the description provided within +stm32f10x_flash.c file.
  • stm32f10x_gpio.h/.c
    • GPIO_PinRemapConfig() function: add new values for GPIO_Remap parameter, to support new remap for FSMC_NADV pin and TIM9..11,13,14.
  • stm32f10x_i2c.h/.c: I2C events description and management enhancement.
    • I2C_CheckEvent() +function: updated to check whether the last event contains the +I2C_EVENT  (instead of check whether the last event is equal to +I2C_EVENT)
    • Add +detailed description of I2C events and how to manage them using the +functions provided by this driver. For more information, refer to +stm32f10x_i2c.h and stm32f10x_i2c.c files.
  • stm32f10x_rcc.h/.c: updated to support TIM9..TIM14 APB clock and reset configuration
  • stm32f10x_tim.h/.c: updated to support new Timers TIM9..TIM14.
  • stm32f10x_sdio.h: 
    • SDIO_SetSDIOReadWaitMode() function: correct values of SDIO_ReadWaitMode parameter
      change
        +#define +SDIO_ReadWaitMode_CLK               +  ((uint32_t)0x00000000)
        #define +SDIO_ReadWaitMode_DATA2             +((uint32_t)0x00000001)
      by
        #define +SDIO_ReadWaitMode_CLK               +  ((uint32_t)0x00000001)
        #define +SDIO_ReadWaitMode_DATA2             +((uint32_t)0x00000000)
+

3.2.0 +- 03/01/2010

+
    +
  1. General
    2. +
+
    + +
  • Add support +for STM32 Low-density Value line (STM32F100x4/6) and +Medium-density Value line (STM32F100x8/B) devices.
    • +
  • Almost +peripherals drivers were updated to support Value +line devices features
    • +
  • Drivers limitations fix and enhancements.
    • + +
+
    +
  1. STM32F10x_StdPeriph_Driver
    2. +
+
    +
  • Add new +firmware driver for CEC peripheral: stm32f10x_cec.h and stm32f10x_cec.c
    • +
  • Timers drivers stm32f10x_tim.h/.c: add support for new General Purpose Timers: TIM15, TIM16 and TIM17.
    • +
  • RCC driver: add support for new Value peripherals: HDMI-CEC, TIM15, TIM16 and TIM17.
    • +
  • GPIO driver: add new remap parameters for TIM1, TIM15, TIM16, TIM17 and HDMI-CEC: GPIO_Remap_TIM1_DMA, GPIO_Remap_TIM15, GPIO_Remap_TIM16, GPIO_Remap_TIM17, GPIO_Remap_CEC.
    • +
  • USART +driver: add support for Oversampling by 8 mode and onebit method. 2 +functions has been added: USART_OverSampling8Cmd() and +USART_OneBitMethodCmd().
    +
    • +
  • DAC +driver: add new functions handling the DAC under run feature: +DAC_ITConfig(), DAC_GetFlagStatus(), DAC_ClearFlag(), DAC_GetITStatus() +and DAC_ClearITPendingBit().
    • +
  • DBGMCU driver: add new parameters for TIM15, TIM16 and TIM17: DBGMCU_TIM15_STOP, DBGMCU_TIM16_STOP, DBGMCU_TIM17_STOP.
    +
    • +
  • FLASH +driver: the FLASH_EraseOptionBytes() function updated. This is now just +erasing the option bytes without modifying the RDP status either +enabled or disabled.
    • +
  • PWR +driver: the PWR_EnterSTOPMode() function updated. When woken up from +STOP mode, this function resets again the SLEEPDEEP bit in the +Cortex-M3 System Control register to allow Sleep mode entering.
    • + + +
+

License

+

The +enclosed firmware and all the related documentation are not covered by +a License Agreement, if you need such License you can contact your +local STMicroelectronics office.

+

THE +PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS +WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO +SAVE TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR +ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY +CLAIMS ARISING FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY +CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH +THEIR PRODUCTS.

+

 

+
+
+

For +complete documentation on STM32(CORTEX M3) 32-Bit Microcontrollers +visit www.st.com/STM32

+
+

+
+
+

 

+
+ \ No newline at end of file