- 05 1月, 2018 1 次提交
-
-
由 Jim Mattson 提交于
Guest GPR values are live in the hardware GPRs at VM-exit. Do not leave any guest values in hardware GPRs after the guest GPR values are saved to the vcpu_vmx structure. This is a partial mitigation for CVE 2017-5715 and CVE 2017-5753. Specifically, it defeats the Project Zero PoC for CVE 2017-5715. Suggested-by: NEric Northup <digitaleric@google.com> Signed-off-by: NJim Mattson <jmattson@google.com> Reviewed-by: NEric Northup <digitaleric@google.com> Reviewed-by: NBenjamin Serebrin <serebrin@google.com> Reviewed-by: NAndrew Honig <ahonig@google.com> [Paolo: Add AMD bits, Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>] Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 21 12月, 2017 2 次提交
-
-
由 Stefan Raspl 提交于
Sort the fields returned by specifying '-f help' on the command line. While at it, simplify the code a bit, indent the output and eliminate an extra blank line at the beginning. Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
rsm_load_state_64() and rsm_enter_protected_mode() load CR3, then CR4 & ~PCIDE, then CR0, then CR4. However, setting CR4.PCIDE fails if CR3[11:0] != 0. It's probably easier in the long run to replace rsm_enter_protected_mode() with an emulator callback that sets all the special registers (like KVM_SET_SREGS would do). For now, set the PCID field of CR3 only after CR4.PCIDE is 1. Reported-by: NLaszlo Ersek <lersek@redhat.com> Tested-by: NLaszlo Ersek <lersek@redhat.com> Fixes: 660a5d51 Cc: stable@vger.kernel.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 18 12月, 2017 7 次提交
-
-
由 Paolo Bonzini 提交于
Merge tag 'kvm-arm-fixes-for-v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/ARM Fixes for v4.15, Round 2 Fixes: - A bug in our handling of SPE state for non-vhe systems - A bug that causes hyp unmapping to go off limits and crash the system on shutdown - Three timer fixes that were introduced as part of the timer optimizations for v4.15
-
由 Wanpeng Li 提交于
Reported by syzkaller: BUG: KASAN: stack-out-of-bounds in write_mmio+0x11e/0x270 [kvm] Read of size 8 at addr ffff8803259df7f8 by task syz-executor/32298 CPU: 6 PID: 32298 Comm: syz-executor Tainted: G OE 4.15.0-rc2+ #18 Hardware name: LENOVO ThinkCentre M8500t-N000/SHARKBAY, BIOS FBKTC1AUS 02/16/2016 Call Trace: dump_stack+0xab/0xe1 print_address_description+0x6b/0x290 kasan_report+0x28a/0x370 write_mmio+0x11e/0x270 [kvm] emulator_read_write_onepage+0x311/0x600 [kvm] emulator_read_write+0xef/0x240 [kvm] emulator_fix_hypercall+0x105/0x150 [kvm] em_hypercall+0x2b/0x80 [kvm] x86_emulate_insn+0x2b1/0x1640 [kvm] x86_emulate_instruction+0x39a/0xb90 [kvm] handle_exception+0x1b4/0x4d0 [kvm_intel] vcpu_enter_guest+0x15a0/0x2640 [kvm] kvm_arch_vcpu_ioctl_run+0x549/0x7d0 [kvm] kvm_vcpu_ioctl+0x479/0x880 [kvm] do_vfs_ioctl+0x142/0x9a0 SyS_ioctl+0x74/0x80 entry_SYSCALL_64_fastpath+0x23/0x9a The path of patched vmmcall will patch 3 bytes opcode 0F 01 C1(vmcall) to the guest memory, however, write_mmio tracepoint always prints 8 bytes through *(u64 *)val since kvm splits the mmio access into 8 bytes. This leaks 5 bytes from the kernel stack (CVE-2017-17741). This patch fixes it by just accessing the bytes which we operate on. Before patch: syz-executor-5567 [007] .... 51370.561696: kvm_mmio: mmio write len 3 gpa 0x10 val 0x1ffff10077c1010f After patch: syz-executor-13416 [002] .... 51302.299573: kvm_mmio: mmio write len 3 gpa 0x10 val 0xc1010f Reported-by: NDmitry Vyukov <dvyukov@google.com> Reviewed-by: NDarren Kenny <darren.kenny@oracle.com> Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com> Tested-by: NMarc Zyngier <marc.zyngier@arm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Christoffer Dall 提交于
When enabling the timer on the first run, we fail to ever restore the state and mark it as loaded. That means, that in the initial entry to the VCPU ioctl, unless we exit to userspace for some reason such as a pending signal, if the guest programs a timer and blocks, we will wait forever, because we never read back the hardware state (the loaded flag is not set), and so we think the timer is disabled, and we never schedule a background soft timer. The end result? The VCPU blocks forever, and the only solution is to kill the thread. Fixes: 4a2c4da1 ("arm/arm64: KVM: Load the timer state when enabling the timer") Reported-by: NMarc Zyngier <marc.zyngier@arm.com> Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com> Tested-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Christoffer Dall 提交于
The recent timer rework was assuming that once the timer was disabled, we should no longer see any interrupts from the timer. This assumption turns out to not be true, and instead we have to handle the case when the timer ISR runs even after the timer has been disabled. This requires a couple of changes: First, we should never overwrite the cached guest state of the timer control register when the ISR runs, because KVM may have disabled its timers when doing vcpu_put(), even though the guest still had the timer enabled. Second, we shouldn't assume that the timer is actually firing just because we see an interrupt, but we should check the actual state of the timer in the timer control register to understand if the hardware timer is really firing or not. We also add an ISB to vtimer_save_state() to ensure the timer is actually disabled once we enable interrupts, which should clarify the intention of the implementation, and reduce the risk of unwanted interrupts. Fixes: b103cc3f ("KVM: arm/arm64: Avoid timer save/restore in vcpu entry/exit") Reported-by: NMarc Zyngier <marc.zyngier@arm.com> Reported-by: NJia He <hejianet@gmail.com> Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com> Tested-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Marc Zyngier 提交于
If we don't have a usable GIC, do not try to set the vcpu affinity as this is guaranteed to fail. Reported-by: NAndre Przywara <andre.przywara@arm.com> Reviewed-by: NAndre Przywara <andre.przywara@arm.com> Tested-by: NAndre Przywara <andre.przywara@arm.com> Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Marc Zyngier 提交于
When we unmap the HYP memory, we try to be clever and unmap one PGD at a time. If we start with a non-PGD aligned address and try to unmap a whole PGD, things go horribly wrong in unmap_hyp_range (addr and end can never match, and it all goes really badly as we keep incrementing pgd and parse random memory as page tables...). The obvious fix is to let unmap_hyp_range do what it does best, which is to iterate over a range. The size of the linear mapping, which begins at PAGE_OFFSET, can be easily calculated by subtracting PAGE_OFFSET form high_memory, because high_memory is defined as the linear map address of the last byte of DRAM, plus one. The size of the vmalloc region is given trivially by VMALLOC_END - VMALLOC_START. Cc: stable@vger.kernel.org Reported-by: NAndre Przywara <andre.przywara@arm.com> Tested-by: NAndre Przywara <andre.przywara@arm.com> Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Julien Thierry 提交于
When VHE is not present, KVM needs to save and restores PMSCR_EL1 when possible. If SPE is used by the host, value of PMSCR_EL1 cannot be saved for the guest. If the host starts using SPE between two save+restore on the same vcpu, restore will write the value of PMSCR_EL1 read during the first save. Make sure __debug_save_spe_nvhe clears the value of the saved PMSCR_EL1 when the guest cannot use SPE. Signed-off-by: NJulien Thierry <julien.thierry@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> Reviewed-by: NWill Deacon <will.deacon@arm.com> Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
- 15 12月, 2017 1 次提交
-
-
由 Lan Tianyu 提交于
Reported by syzkaller: WARNING: CPU: 0 PID: 27962 at arch/x86/kvm/emulate.c:5631 x86_emulate_insn+0x557/0x15f0 [kvm] Modules linked in: kvm_intel kvm [last unloaded: kvm] CPU: 0 PID: 27962 Comm: syz-executor Tainted: G B W 4.15.0-rc2-next-20171208+ #32 Hardware name: Intel Corporation S1200SP/S1200SP, BIOS S1200SP.86B.01.03.0006.040720161253 04/07/2016 RIP: 0010:x86_emulate_insn+0x557/0x15f0 [kvm] RSP: 0018:ffff8807234476d0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff88072d0237a0 RCX: ffffffffa0065c4d RDX: 1ffff100e5a046f9 RSI: 0000000000000003 RDI: ffff88072d0237c8 RBP: ffff880723447728 R08: ffff88072d020000 R09: ffffffffa008d240 R10: 0000000000000002 R11: ffffed00e7d87db3 R12: ffff88072d0237c8 R13: ffff88072d023870 R14: ffff88072d0238c2 R15: ffffffffa008d080 FS: 00007f8a68666700(0000) GS:ffff880802200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000002009506c CR3: 000000071fec4005 CR4: 00000000003626f0 Call Trace: x86_emulate_instruction+0x3bc/0xb70 [kvm] ? reexecute_instruction.part.162+0x130/0x130 [kvm] vmx_handle_exit+0x46d/0x14f0 [kvm_intel] ? trace_event_raw_event_kvm_entry+0xe7/0x150 [kvm] ? handle_vmfunc+0x2f0/0x2f0 [kvm_intel] ? wait_lapic_expire+0x25/0x270 [kvm] vcpu_enter_guest+0x720/0x1ef0 [kvm] ... When CS.L is set, vcpu should run in the 64 bit paging mode. Current kvm set_sregs function doesn't have such check when userspace inputs sreg values. This will lead unexpected behavior. This patch is to add checks for CS.L, EFER.LME, EFER.LMA and CR4.PAE when get SREG inputs from userspace in order to avoid unexpected behavior. Suggested-by: NPaolo Bonzini <pbonzini@redhat.com> Reported-by: NDmitry Vyukov <dvyukov@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jim Mattson <jmattson@google.com> Signed-off-by: NTianyu Lan <tianyu.lan@intel.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 14 12月, 2017 13 次提交
-
-
由 Stefan Raspl 提交于
Add a line for the total number of events and current average at the bottom of the body. Note that both values exclude child trace events. I.e. if drilldown is activated via interactive command 'x', only the totals are accounted, or we'd be counting these twice (see previous commit "tools/kvm_stat: fix child trace events accounting"). Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Stefan Raspl 提交于
Unhandled arguments, which could easily include typos, are simply ignored. We should be strict to avoid undetected typos. To reproduce start kvm_stat with an extra argument, e.g. 'kvm_stat -d bnuh5ol' and note that this will actually work. Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Stefan Raspl 提交于
Errors while parsing the '-g' command line argument result in display of usage information prior to the error message. This is a bit confusing, as the command line is syntactically correct. To reproduce, run 'kvm_stat -g' and specify a non-existing or inactive guest. Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Stefan Raspl 提交于
Passing an invalid regular expression on the command line results in a traceback. Note that interactive specification of invalid regular expressions is not affected To reproduce, run "kvm_stat -f '*'". Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Stefan Raspl 提交于
The man page update for this new functionality was omitted. Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Stefan Raspl 提交于
Child trace events were included in calculation of the overall total, which is used for calculation of the percentages of the '%Total' column. However, the parent trace envents' stats summarize the child trace events, hence we'd incorrectly account for them twice, leading to slightly wrong stats. With this fix, we use the correct total. Consequently, the sum of the child trace events' '%Total' column values is identical to the respective value of the respective parent event. However, this also means that the sum of the '%Total' column values will aggregate to more than 100 percent. Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Stefan Raspl 提交于
Commit 67fbcd62 ("tools/kvm_stat: add '-f help' to get the available event list") added support for '-f help'. However, the extra handling of 'help' will also take effect when 'help' is specified as a regex in interactive mode via 'f'. This results in display of all events while only those matching this regex should be shown. Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Stefan Raspl 提交于
When updating the fields filter, tracepoint events of fields previously not visible were not enabled, as TracepointProvider.update_fields() updated the member variable directly instead of using the setter, which triggers the event enable/disable. To reproduce, run 'kvm_stat -f kvm_exit', press 'c' to remove the filter, and notice that no add'l fields that do not match the regex 'kvm_exit' will appear. This issue was introduced by commit c469117d ("tools/kvm_stat: simplify initializers"). Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Stefan Raspl 提交于
When displaying debugfs events listed by guests, an attempt to switch to reporting of stats for individual child trace events results in garbled output. Reason is that when toggling drilldown, the update of the stats doesn't honor when events are displayed by guests, as indicated by Tui._display_guests. To reproduce, run 'kvm_stat -d' and press 'b' followed by 'x'. Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Stefan Raspl 提交于
Specifying a guest via '-g foo' always results in an error: $ kvm_stat -g foo Usage: kvm_stat [options] kvm_stat: error: Error while searching for guest "foo", use "-p" to specify a pid instead Reason is that Tui.get_pid_from_gname() is not static, as it is supposed to be. Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Peter Xu 提交于
------------[ cut here ]------------ Bad FPU state detected at kvm_put_guest_fpu+0xd8/0x2d0 [kvm], reinitializing FPU registers. WARNING: CPU: 1 PID: 4594 at arch/x86/mm/extable.c:103 ex_handler_fprestore+0x88/0x90 CPU: 1 PID: 4594 Comm: qemu-system-x86 Tainted: G B OE 4.15.0-rc2+ #10 RIP: 0010:ex_handler_fprestore+0x88/0x90 Call Trace: fixup_exception+0x4e/0x60 do_general_protection+0xff/0x270 general_protection+0x22/0x30 RIP: 0010:kvm_put_guest_fpu+0xd8/0x2d0 [kvm] RSP: 0018:ffff8803d5627810 EFLAGS: 00010246 kvm_vcpu_reset+0x3b4/0x3c0 [kvm] kvm_apic_accept_events+0x1c0/0x240 [kvm] kvm_arch_vcpu_ioctl_run+0x1658/0x2fb0 [kvm] kvm_vcpu_ioctl+0x479/0x880 [kvm] do_vfs_ioctl+0x142/0x9a0 SyS_ioctl+0x74/0x80 do_syscall_64+0x15f/0x600 where kvm_put_guest_fpu is called without a prior kvm_load_guest_fpu. To fix it, move kvm_load_guest_fpu to the very beginning of kvm_arch_vcpu_ioctl_run. Cc: stable@vger.kernel.org Fixes: f775b13eSigned-off-by: NPeter Xu <peterx@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Wanpeng Li 提交于
*** Guest State *** CR0: actual=0x0000000000000030, shadow=0x0000000060000010, gh_mask=fffffffffffffff7 CR4: actual=0x0000000000002050, shadow=0x0000000000000000, gh_mask=ffffffffffffe871 CR3 = 0x00000000fffbc000 RSP = 0x0000000000000000 RIP = 0x0000000000000000 RFLAGS=0x00000000 DR7 = 0x0000000000000400 ^^^^^^^^^^ The failed vmentry is triggered by the following testcase when ept=Y: #include <unistd.h> #include <sys/syscall.h> #include <string.h> #include <stdint.h> #include <linux/kvm.h> #include <fcntl.h> #include <sys/ioctl.h> long r[5]; int main() { r[2] = open("/dev/kvm", O_RDONLY); r[3] = ioctl(r[2], KVM_CREATE_VM, 0); r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7); struct kvm_regs regs = { .rflags = 0, }; ioctl(r[4], KVM_SET_REGS, ®s); ioctl(r[4], KVM_RUN, 0); } X86 RFLAGS bit 1 is fixed set, userspace can simply clearing bit 1 of RFLAGS with KVM_SET_REGS ioctl which results in vmentry fails. This patch fixes it by oring X86_EFLAGS_FIXED during ioctl. Cc: stable@vger.kernel.org Suggested-by: NJim Mattson <jmattson@google.com> Reviewed-by: NDavid Hildenbrand <david@redhat.com> Reviewed-by: NQuan Xu <quan.xu0@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Jim Mattson <jmattson@google.com> Cc: stable@vger.kernel.org Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Wanpeng Li 提交于
The below test case can cause infinite loop in kvm when ept=0. #include <unistd.h> #include <sys/syscall.h> #include <string.h> #include <stdint.h> #include <linux/kvm.h> #include <fcntl.h> #include <sys/ioctl.h> long r[5]; int main() { r[2] = open("/dev/kvm", O_RDONLY); r[3] = ioctl(r[2], KVM_CREATE_VM, 0); r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7); ioctl(r[4], KVM_RUN, 0); } It doesn't setup the memory regions, mmu_alloc_shadow/direct_roots() in kvm return 1 when kvm fails to allocate root page table which can result in beblow infinite loop: vcpu_run() { for (;;) { r = vcpu_enter_guest()::kvm_mmu_reload() returns 1 if (r <= 0) break; if (need_resched()) cond_resched(); } } This patch fixes it by returning -ENOSPC when there is no available kvm mmu page for root page table. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: stable@vger.kernel.org Fixes: 26eeb53c (KVM: MMU: Bail out immediately if there is no available mmu page) Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 11 12月, 2017 6 次提交
-
-
由 Linus Torvalds 提交于
-
由 Jeff Layton 提交于
HPFS does not set SB_I_VERSION and does not use the i_version counter internally. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NMikulas Patocka <mikulas@twibright.com> Reviewed-by: NMikulas Patocka <mikulas@twibright.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jiri Slaby 提交于
sign_extend32 counts the sign bit parameter from 0, not from 1. So we have to use "11" for 12th bit, not "12". This mistake means we have not allowed negative op and cmp args since commit 30d6e0a4 ("futex: Remove duplicated code and fix undefined behaviour") till now. Fixes: 30d6e0a4 ("futex: Remove duplicated code and fix undefined behaviour") Signed-off-by: NJiri Slaby <jslaby@suse.cz> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Darren Hart <dvhart@infradead.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux由 Linus Torvalds 提交于
Pull btrfs fixes from David Sterba: "This contains a few fixes (error handling, quota leak, FUA vs nobarrier mount option). There's one one worth mentioning separately - an off-by-one fix that leads to overwriting first byte of an adjacent page with 0, out of bounds of the memory allocated by an ioctl. This is under a privileged part of the ioctl, can be triggerd in some subvolume layouts" * tag 'for-4.15-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: Fix possible off-by-one in btrfs_search_path_in_tree Btrfs: disable FUA if mounted with nobarrier btrfs: fix missing error return in btrfs_drop_snapshot btrfs: handle errors while updating refcounts in update_ref_for_cow btrfs: Fix quota reservation leak on preallocated files
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: - A revert of all SCPI changes from the 4.15 merge window. They had regressions on the Amlogic platforms, and the submaintainer isn't around to fix these bugs due to vacation, etc. So we agreed to revert and revisit in next release cycle. - A series fixing a number of bugs for ARM CCN interconnect, around module unload, smp_processor_id() in preemptable context, and fixing some memory allocation failure checks. - A handful of devicetree fixes for different platforms, fixing warnings and errors that were previously ignored by the compiler. - The usual set of mostly minor fixes for different platforms. * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits) ARM64: dts: meson-gx: fix UART pclk clock name ARM: omap2: hide omap3_save_secure_ram on non-OMAP3 builds arm: dts: nspire: Add missing #phy-cells to usb-nop-xceiv ARM: dts: Fix dm814x missing phy-cells property ARM: dts: Fix elm interrupt compiler warning bus: arm-ccn: fix module unloading Error: Removing state 147 which has instances left. bus: arm-cci: Fix use of smp_processor_id() in preemptible context bus: arm-ccn: Fix use of smp_processor_id() in preemptible context bus: arm-ccn: Simplify code bus: arm-ccn: Check memory allocation failure bus: arm-ccn: constify attribute_group structures. firmware: arm_scpi: Revert updates made during v4.15 merge window arm: dts: marvell: Add missing #phy-cells to usb-nop-xceiv arm64: dts: sort vendor subdirectories in Makefile alphabetically meson-gx-socinfo: Fix package id parsing ARM: meson: fix spelling mistake: "Couln't" -> "Couldn't" ARM: dts: meson: fix the memory region of the GPIO interrupt controller ARM: dts: meson: correct the sort order for the the gpio_intc node MAINTAINERS: exclude other Socionext SoC DT files from ARM/UNIPHIER entry arm64: dts: uniphier: remove unnecessary interrupt-parent ...
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fixes from Radim Krčmář: "ARM: - A number of issues in the vgic discovered using SMATCH - A bit one-off calculation in out stage base address mask (32-bit and 64-bit) - Fixes to single-step debugging instructions that trap for other reasons such as MMMIO aborts - Printing unavailable hyp mode as error - Potential spinlock deadlock in the vgic - Avoid calling vgic vcpu free more than once - Broken bit calculation for big endian systems s390: - SPDX tags - Fence storage key accesses from problem state - Make sure that irq_state.flags is not used in the future x86: - Intercept port 0x80 accesses to prevent host instability (CVE) - Use userspace FPU context for guest FPU (mainly an optimization that fixes a double use of kernel FPU) - Do not leak one page per module load - Flush APIC page address cache from MMU invalidation notifiers" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits) KVM: x86: fix APIC page invalidation KVM: s390: Fix skey emulation permission check KVM: s390: mark irq_state.flags as non-usable KVM: s390: Remove redundant license text KVM: s390: add SPDX identifiers to the remaining files KVM: VMX: fix page leak in hardware_setup() KVM: VMX: remove I/O port 0x80 bypass on Intel hosts x86,kvm: remove KVM emulator get_fpu / put_fpu x86,kvm: move qemu/guest FPU switching out to vcpu_run KVM: arm/arm64: Fix broken GICH_ELRSR big endian conversion KVM: arm/arm64: kvm_arch_destroy_vm cleanups KVM: arm/arm64: Fix spinlock acquisition in vgic_set_owner kvm: arm: don't treat unavailable HYP mode as an error KVM: arm/arm64: Avoid attempting to load timer vgic state without a vgic kvm: arm64: handle single-step of hyp emulated mmio instructions kvm: arm64: handle single-step during SError exceptions kvm: arm64: handle single-step of userspace mmio instructions kvm: arm64: handle single-stepping trapped instructions KVM: arm/arm64: debug: Introduce helper for single-step arm: KVM: Fix VTTBR_BADDR_MASK BUG_ON off-by-one ...
-
- 10 12月, 2017 4 次提交
-
-
由 Olof Johansson 提交于
* fixes: ARM64: dts: meson-gx: fix UART pclk clock name ARM: dts: Fix dm814x missing phy-cells property ARM: dts: Fix elm interrupt compiler warning bus: arm-ccn: fix module unloading Error: Removing state 147 which has instances left. bus: arm-cci: Fix use of smp_processor_id() in preemptible context bus: arm-ccn: Fix use of smp_processor_id() in preemptible context bus: arm-ccn: Simplify code bus: arm-ccn: Check memory allocation failure bus: arm-ccn: constify attribute_group structures. meson-gx-socinfo: Fix package id parsing ARM: meson: fix spelling mistake: "Couln't" -> "Couldn't" ARM: dts: meson: fix the memory region of the GPIO interrupt controller ARM: dts: meson: correct the sort order for the the gpio_intc node
-
由 Olof Johansson 提交于
Merge tag 'amlogic-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into fixes Amlogic fixes for v4.15-rc - GPIO interrupt fixes - socinfo fix for GX series - fix typo * tag 'amlogic-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM64: dts: meson-gx: fix UART pclk clock name meson-gx-socinfo: Fix package id parsing ARM: meson: fix spelling mistake: "Couln't" -> "Couldn't" ARM: dts: meson: fix the memory region of the GPIO interrupt controller ARM: dts: meson: correct the sort order for the the gpio_intc node Signed-off-by: NOlof Johansson <olof@lixom.net>
-
git://git.linaro.org/people/pawel.moll/linux由 Olof Johansson 提交于
bus: ARM CCN and CCI PMU driver fixes This is a bunch of fixes CCN and (guest starring this time) CCI drivers. * Check for potential of failed allocation for the driver name string * Manage CPU ID properly at allocation (both CCN and CCI) * Fix module unload warnings related to objects release order * Small improvements like using allocating printfs and proper attributes constification The one fixing potential issues have been cc-ed to stable. * tag 'ccn/fixes-for-4.15' of git://git.linaro.org/people/pawel.moll/linux: bus: arm-ccn: fix module unloading Error: Removing state 147 which has instances left. bus: arm-cci: Fix use of smp_processor_id() in preemptible context bus: arm-ccn: Fix use of smp_processor_id() in preemptible context bus: arm-ccn: Simplify code bus: arm-ccn: Check memory allocation failure bus: arm-ccn: constify attribute_group structures. Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Olof Johansson 提交于
Merge tag 'omap-for-v4.15/fixes-dt-warnings' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Two fixes for dts compiler warnings These recently started showing up with better dtc checks being introduced. * tag 'omap-for-v4.15/fixes-dt-warnings' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Fix dm814x missing phy-cells property ARM: dts: Fix elm interrupt compiler warning Signed-off-by: NOlof Johansson <olof@lixom.net>
-
- 09 12月, 2017 6 次提交
-
-
由 James Morris 提交于
Merge tag 'keys-fixes-20171208' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs into keys-for-linus Assorted fixes for keyrings, ASN.1, X.509 and PKCS#7.
-
由 Michal Hocko 提交于
Commit 4675ff05 ("kmemcheck: rip it out") has removed the code but for some reason SPDX header stayed in place. This looks like a rebase mistake in the mmotm tree or the merge mistake. Let's drop those leftovers as well. Signed-off-by: NMichal Hocko <mhocko@suse.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) CAN fixes from Martin Kelly (cancel URBs properly in all the CAN usb drivers). 2) Revert returning -EEXIST from __dev_alloc_name() as this propagates to userspace and broke some apps. From Johannes Berg. 3) Fix conn memory leaks and crashes in TIPC, from Jon Malloc and Cong Wang. 4) Gianfar MAC can't do EEE so don't advertise it by default, from Claudiu Manoil. 5) Relax strict netlink attribute validation, but emit a warning. From David Ahern. 6) Fix regression in checksum offload of thunderx driver, from Florian Westphal. 7) Fix UAPI bpf issues on s390, from Hendrik Brueckner. 8) New card support in iwlwifi, from Ihab Zhaika. 9) BBR congestion control bug fixes from Neal Cardwell. 10) Fix port stats in nfp driver, from Pieter Jansen van Vuuren. 11) Fix leaks in qualcomm rmnet, from Subash Abhinov Kasiviswanathan. 12) Fix DMA API handling in sh_eth driver, from Thomas Petazzoni. 13) Fix spurious netpoll warnings in bnxt_en, from Calvin Owens. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (67 commits) net: mvpp2: fix the RSS table entry offset tcp: evaluate packet losses upon RTT change tcp: fix off-by-one bug in RACK tcp: always evaluate losses in RACK upon undo tcp: correctly test congestion state in RACK bnxt_en: Fix sources of spurious netpoll warnings tcp_bbr: reset long-term bandwidth sampling on loss recovery undo tcp_bbr: reset full pipe detection on loss recovery undo tcp_bbr: record "full bw reached" decision in new full_bw_reached bit sfc: pass valid pointers from efx_enqueue_unwind gianfar: Disable EEE autoneg by default tcp: invalidate rate samples during SACK reneging can: peak/pcie_fd: fix potential bug in restarting tx queue can: usb_8dev: cancel urb on -EPIPE and -EPROTO can: kvaser_usb: cancel urb on -EPIPE and -EPROTO can: esd_usb2: cancel urb on -EPIPE and -EPROTO can: ems_usb: cancel urb on -EPIPE and -EPROTO can: mcba_usb: cancel urb on -EPROTO usbnet: fix alignment for frames with no ethernet header tcp: use current time in tcp_rcv_space_adjust() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media由 Linus Torvalds 提交于
Pull media fixes from Mauro Carvalho Chehab: "A series of fixes for the media subsytem: - The largest amount of fixes in this series is with regards to comments that aren't kernel-doc, but start with "/**". A new check added for 4.15 makes it to produce a *huge* amount of new warnings (I'm compiling here with W=1). Most of the patches in this series fix those. No code changes - just comment changes at the source files - rc: some fixed in order to better handle RC repetition codes - v4l-async: use the v4l2_dev from the root notifier when matching sub-devices - v4l2-fwnode: Check subdev count after checking port - ov 13858 and et8ek8: compilation fix with randconfigs - usbtv: a trivial new USB ID addition - dibusb-common: don't do DMA on stack on firmware load - imx274: Fix error handling, add MAINTAINERS entry - sir_ir: detect presence of port" * tag 'media/v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (50 commits) media: imx274: Fix error handling, add MAINTAINERS entry media: v4l: async: use the v4l2_dev from the root notifier when matching sub-devices media: v4l2-fwnode: Check subdev count after checking port media: et8ek8: select V4L2_FWNODE media: ov13858: Select V4L2_FWNODE media: rc: partial revert of "media: rc: per-protocol repeat period" media: dvb: i2c transfers over usb cannot be done from stack media: dvb-frontends: complete kernel-doc markups media: docs: add documentation for frontend attach info media: dvb_frontends: fix kernel-doc macros media: drivers: remove "/**" from non-kernel-doc comments media: lm3560: add a missing kernel-doc parameter media: rcar_jpu: fix two kernel-doc markups media: vsp1: add a missing kernel-doc parameter media: soc_camera: fix a kernel-doc markup media: mt2063: fix some kernel-doc warnings media: radio-wl1273: fix a parameter name at kernel-doc macro media: s3c-camif: add missing description at s3c_camif_find_format() media: mtk-vpu: add description for wdt fields at struct mtk_vpu media: vdec: fix some kernel-doc warnings ...
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "This pull is a bit larger than I'd like but a large bunch of it is license fixes, AMD wanted to fix the licenses for a bunch of files that were missing them, Otherwise a bunch of TTM regression fix since the hugepage support, some i915 and gvt fixes, a core connector free in a safe context fix, and one bridge fix" * tag 'drm-fixes-for-v4.15-rc3' of git://people.freedesktop.org/~airlied/linux: (26 commits) drm/bridge: analogix dp: Fix runtime PM state in get_modes() callback Revert "drm/i915: Display WA #1133 WaFbcSkipSegments:cnl, glk" drm/vc4: Fix false positive WARN() backtrace on refcount_inc() usage drm/i915: Call i915_gem_init_userptr() before taking struct_mutex drm/exynos: remove unnecessary function declaration drm/exynos: remove unnecessary descrptions drm/exynos: gem: Drop NONCONTIG flag for buffers allocated without IOMMU drm/exynos: Fix dma-buf import drm/ttm: swap consecutive allocated pooled pages v4 drm: safely free connectors from connector_iter drm/i915/gvt: set max priority for gvt context drm/i915/gvt: Don't mark vgpu context as inactive when preempted drm/i915/gvt: Limit read hw reg to active vgpu drm/i915/gvt: Export intel_gvt_render_mmio_to_ring_id() drm/i915/gvt: Emulate PCI expansion ROM base address register drm/ttm: swap consecutive allocated cached pages v3 drm/ttm: roundup the shrink request to prevent skip huge pool drm/ttm: add page order support in ttm_pages_put drm/ttm: add set_pages_wb for handling page order more than zero drm/ttm: add page order in page pool ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/shli/md由 Linus Torvalds 提交于
Pull md fixes from Shaohua Li: "Some MD fixes. The notable one is a raid5-cache deadlock bug with dm-raid, others are not significant" * tag 'md/4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: md/raid1/10: add missed blk plug md: limit mdstat resync progress to max_sectors md/r5cache: move mddev_lock() out of r5c_journal_mode_set() md/raid5: correct degraded calculation in raid5_error
-