提交 06ec4190 编写于 作者: S Sinclair Yeh

drm/vmwgfx: Add and connect CRTC helper functions

Atomic mode set requires us to refactor existing vmw_stdu_crtc_set_config
code into sections that check the validity of the new mode, and sections
that actually program the hardware state.

vmw_du_crtc_atomic_check() takes CRTC-related checking code.  In a later
patch, vmw_du_primary_plane_atomic_check() will take framebuffer-related
checking code.

These helpers won't be called until we flip on the atomic support
flag or set drm_crtc_funcs->set_config to using the atomic
helper.

v2:
* The state->num_connector is actually the total number of potential
  connectors, not just the one associated with the display unit.
  The proper one to check is ->connector_mask.

* Add the check to only allow plane state to be the same as crtc state
  (Thanks to mlankhorst)

* Make sure to turn on SVGA mode before using VRAM.  SVGA mode is
  disabled in master_drop if dbdev is not running.

v3:
* Moved dot clock override to crtc_atomic_check
Signed-off-by: NSinclair Yeh <syeh@vmware.com>
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>
Acked-by: NDaniel Vetter <daniel@ffwll.ch>
上级 d7721ca7
......@@ -390,6 +390,61 @@ void vmw_du_primary_plane_destroy(struct drm_plane *plane)
}
int vmw_du_crtc_atomic_check(struct drm_crtc *crtc,
struct drm_crtc_state *new_state)
{
struct vmw_display_unit *du = vmw_crtc_to_du(new_state->crtc);
int connector_mask = 1 << drm_connector_index(&du->connector);
bool has_primary = new_state->plane_mask &
BIT(drm_plane_index(crtc->primary));
/* We always want to have an active plane with an active CRTC */
if (has_primary != new_state->enable)
return -EINVAL;
if (new_state->connector_mask != connector_mask &&
new_state->connector_mask != 0) {
DRM_ERROR("Invalid connectors configuration\n");
return -EINVAL;
}
/*
* Our virtual device does not have a dot clock, so use the logical
* clock value as the dot clock.
*/
if (new_state->mode.crtc_clock == 0)
new_state->adjusted_mode.crtc_clock = new_state->mode.clock;
return 0;
}
void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc,
struct drm_crtc_state *old_crtc_state)
{
}
void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc,
struct drm_crtc_state *old_crtc_state)
{
struct drm_pending_vblank_event *event = crtc->state->event;
if (event) {
crtc->state->event = NULL;
spin_lock_irq(&crtc->dev->event_lock);
if (drm_crtc_vblank_get(crtc) == 0)
drm_crtc_arm_vblank_event(crtc, event);
else
drm_crtc_send_vblank_event(crtc, event);
spin_unlock_irq(&crtc->dev->event_lock);
}
}
/**
* vmw_du_crtc_duplicate_state - duplicate crtc state
* @crtc: DRM crtc
......
......@@ -161,6 +161,7 @@ struct vmw_crtc_state {
* @surf Display surface for STDU
* @dmabuf display dmabuf for SOU
* @content_fb_type Used by STDU.
* @dmabuf_size Size of the dmabuf, used by Screen Object Display Unit
* @pinned pin count for STDU display surface
*/
struct vmw_plane_state {
......@@ -169,6 +170,7 @@ struct vmw_plane_state {
struct vmw_dma_buffer *dmabuf;
int content_fb_type;
unsigned long dmabuf_size;
int pinned;
};
......@@ -342,10 +344,17 @@ int vmw_du_cursor_plane_update(struct drm_plane *plane,
uint32_t src_x, uint32_t src_y,
uint32_t src_w, uint32_t src_h);
/* Atomic Helpers */
void vmw_du_plane_reset(struct drm_plane *plane);
struct drm_plane_state *vmw_du_plane_duplicate_state(struct drm_plane *plane);
void vmw_du_plane_destroy_state(struct drm_plane *plane,
struct drm_plane_state *state);
int vmw_du_crtc_atomic_check(struct drm_crtc *crtc,
struct drm_crtc_state *state);
void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc,
struct drm_crtc_state *old_crtc_state);
void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc,
struct drm_crtc_state *old_crtc_state);
void vmw_du_crtc_reset(struct drm_crtc *crtc);
struct drm_crtc_state *vmw_du_crtc_duplicate_state(struct drm_crtc *crtc);
void vmw_du_crtc_destroy_state(struct drm_crtc *crtc,
......
......@@ -167,6 +167,7 @@ static int vmw_ldu_add_active(struct vmw_private *vmw_priv,
if (vfb != ld->fb) {
if (ld->fb && ld->fb->unpin)
ld->fb->unpin(ld->fb);
vmw_svga_enable(vmw_priv);
if (vfb->pin)
vfb->pin(vfb);
ld->fb = vfb;
......@@ -190,6 +191,68 @@ static int vmw_ldu_add_active(struct vmw_private *vmw_priv,
return 0;
}
/**
* vmw_ldu_crtc_mode_set_nofb - Enable svga
*
* @crtc: CRTC associated with the new screen
*
* For LDU, just enable the svga
*/
static void vmw_ldu_crtc_mode_set_nofb(struct drm_crtc *crtc)
{
}
/**
* vmw_ldu_crtc_helper_prepare - Noop
*
* @crtc: CRTC associated with the new screen
*
* Prepares the CRTC for a mode set, but we don't need to do anything here.
*
*/
static void vmw_ldu_crtc_helper_prepare(struct drm_crtc *crtc)
{
}
/**
* vmw_ldu_crtc_helper_commit - Noop
*
* @crtc: CRTC associated with the new screen
*
* This is called after a mode set has been completed. Here's
* usually a good place to call vmw_ldu_add_active/vmw_ldu_del_active
* but since for LDU the display plane is closely tied to the
* CRTC, it makes more sense to do those at plane update time.
*/
static void vmw_ldu_crtc_helper_commit(struct drm_crtc *crtc)
{
struct vmw_private *dev_priv;
struct vmw_legacy_display_unit *ldu;
struct vmw_framebuffer *vfb;
struct drm_framebuffer *fb;
ldu = vmw_crtc_to_ldu(crtc);
dev_priv = vmw_priv(crtc->dev);
fb = crtc->primary->fb;
vfb = (fb) ? vmw_framebuffer_to_vfb(fb) : NULL;
if (vfb)
vmw_ldu_add_active(dev_priv, ldu, vfb);
else
vmw_ldu_del_active(dev_priv, ldu);
}
/**
* vmw_ldu_crtc_helper_disable - Turns off CRTC
*
* @crtc: CRTC to be turned off
*/
static void vmw_ldu_crtc_helper_disable(struct drm_crtc *crtc)
{
}
static int vmw_ldu_crtc_set_config(struct drm_mode_set *set)
{
struct vmw_private *dev_priv;
......@@ -346,6 +409,20 @@ static const struct drm_plane_funcs vmw_ldu_cursor_funcs = {
.atomic_destroy_state = vmw_du_plane_destroy_state,
};
/*
* Atomic Helpers
*/
static const struct drm_crtc_helper_funcs vmw_ldu_crtc_helper_funcs = {
.prepare = vmw_ldu_crtc_helper_prepare,
.commit = vmw_ldu_crtc_helper_commit,
.disable = vmw_ldu_crtc_helper_disable,
.mode_set = drm_helper_crtc_mode_set,
.mode_set_nofb = vmw_ldu_crtc_mode_set_nofb,
.atomic_check = vmw_du_crtc_atomic_check,
.atomic_begin = vmw_du_crtc_atomic_begin,
.atomic_flush = vmw_du_crtc_atomic_flush,
};
static int vmw_ldu_init(struct vmw_private *dev_priv, unsigned unit)
{
......@@ -445,6 +522,8 @@ static int vmw_ldu_init(struct vmw_private *dev_priv, unsigned unit)
goto err_free_unregister;
}
drm_crtc_helper_add(crtc, &vmw_ldu_crtc_helper_funcs);
drm_mode_crtc_set_gamma_size(crtc, 256);
drm_object_attach_property(&connector->base,
......
......@@ -250,6 +250,109 @@ static int vmw_sou_backing_alloc(struct vmw_private *dev_priv,
return ret;
}
/**
* vmw_sou_crtc_mode_set_nofb - Create new screen
*
* @crtc: CRTC associated with the new screen
*
* This function creates/destroys a screen. This function cannot fail, so if
* somehow we run into a failure, just do the best we can to get out.
*/
static void vmw_sou_crtc_mode_set_nofb(struct drm_crtc *crtc)
{
struct vmw_private *dev_priv;
struct vmw_screen_object_unit *sou;
struct vmw_framebuffer *vfb;
struct drm_framebuffer *fb;
struct drm_plane_state *ps;
struct vmw_plane_state *vps;
int ret;
sou = vmw_crtc_to_sou(crtc);
dev_priv = vmw_priv(crtc->dev);
ps = crtc->primary->state;
fb = ps->fb;
vps = vmw_plane_state_to_vps(ps);
vfb = (fb) ? vmw_framebuffer_to_vfb(fb) : NULL;
if (sou->defined) {
ret = vmw_sou_fifo_destroy(dev_priv, sou);
if (ret) {
DRM_ERROR("Failed to destroy Screen Object\n");
return;
}
}
if (vfb) {
sou->buffer = vps->dmabuf;
sou->buffer_size = vps->dmabuf_size;
ret = vmw_sou_fifo_create(dev_priv, sou, crtc->x, crtc->y,
&crtc->mode);
if (ret)
DRM_ERROR("Failed to define Screen Object %dx%d\n",
crtc->x, crtc->y);
vmw_kms_add_active(dev_priv, &sou->base, vfb);
} else {
sou->buffer = NULL;
sou->buffer_size = 0;
vmw_kms_del_active(dev_priv, &sou->base);
}
}
/**
* vmw_sou_crtc_helper_prepare - Noop
*
* @crtc: CRTC associated with the new screen
*
* Prepares the CRTC for a mode set, but we don't need to do anything here.
*/
static void vmw_sou_crtc_helper_prepare(struct drm_crtc *crtc)
{
}
/**
* vmw_sou_crtc_helper_commit - Noop
*
* @crtc: CRTC associated with the new screen
*
* This is called after a mode set has been completed.
*/
static void vmw_sou_crtc_helper_commit(struct drm_crtc *crtc)
{
}
/**
* vmw_sou_crtc_helper_disable - Turns off CRTC
*
* @crtc: CRTC to be turned off
*/
static void vmw_sou_crtc_helper_disable(struct drm_crtc *crtc)
{
struct vmw_private *dev_priv;
struct vmw_screen_object_unit *sou;
int ret;
if (!crtc) {
DRM_ERROR("CRTC is NULL\n");
return;
}
sou = vmw_crtc_to_sou(crtc);
dev_priv = vmw_priv(crtc->dev);
if (sou->defined) {
ret = vmw_sou_fifo_destroy(dev_priv, sou);
if (ret)
DRM_ERROR("Failed to destroy Screen Object\n");
}
}
static int vmw_sou_crtc_set_config(struct drm_mode_set *set)
{
struct vmw_private *dev_priv;
......@@ -527,6 +630,20 @@ static const struct drm_plane_funcs vmw_sou_cursor_funcs = {
.atomic_destroy_state = vmw_du_plane_destroy_state,
};
/*
* Atomic Helpers
*/
static const struct drm_crtc_helper_funcs vmw_sou_crtc_helper_funcs = {
.prepare = vmw_sou_crtc_helper_prepare,
.commit = vmw_sou_crtc_helper_commit,
.disable = vmw_sou_crtc_helper_disable,
.mode_set = drm_helper_crtc_mode_set,
.mode_set_nofb = vmw_sou_crtc_mode_set_nofb,
.atomic_check = vmw_du_crtc_atomic_check,
.atomic_begin = vmw_du_crtc_atomic_begin,
.atomic_flush = vmw_du_crtc_atomic_flush,
};
static int vmw_sou_init(struct vmw_private *dev_priv, unsigned unit)
{
......@@ -626,6 +743,8 @@ static int vmw_sou_init(struct vmw_private *dev_priv, unsigned unit)
goto err_free_unregister;
}
drm_crtc_helper_add(crtc, &vmw_sou_crtc_helper_funcs);
drm_mode_crtc_set_gamma_size(crtc, 256);
drm_object_attach_property(&connector->base,
......
......@@ -500,6 +500,106 @@ static int vmw_stdu_bind_fb(struct vmw_private *dev_priv,
return ret;
}
/**
* vmw_stdu_crtc_mode_set_nofb - Updates screen target size
*
* @crtc: CRTC associated with the screen target
*
* This function defines/destroys a screen target
*
*/
static void vmw_stdu_crtc_mode_set_nofb(struct drm_crtc *crtc)
{
struct vmw_private *dev_priv;
struct vmw_screen_target_display_unit *stdu;
int ret;
stdu = vmw_crtc_to_stdu(crtc);
dev_priv = vmw_priv(crtc->dev);
if (stdu->defined) {
ret = vmw_stdu_bind_st(dev_priv, stdu, NULL);
if (ret)
DRM_ERROR("Failed to blank CRTC\n");
(void) vmw_stdu_update_st(dev_priv, stdu);
ret = vmw_stdu_destroy_st(dev_priv, stdu);
if (ret)
DRM_ERROR("Failed to destroy Screen Target\n");
stdu->content_fb_type = SAME_AS_DISPLAY;
}
if (!crtc->state->enable)
return;
vmw_svga_enable(dev_priv);
ret = vmw_stdu_define_st(dev_priv, stdu, &crtc->mode, crtc->x, crtc->y);
if (ret)
DRM_ERROR("Failed to define Screen Target of size %dx%d\n",
crtc->x, crtc->y);
}
static void vmw_stdu_crtc_helper_prepare(struct drm_crtc *crtc)
{
}
static void vmw_stdu_crtc_helper_commit(struct drm_crtc *crtc)
{
struct vmw_private *dev_priv;
struct vmw_screen_target_display_unit *stdu;
struct vmw_framebuffer *vfb;
struct drm_framebuffer *fb;
stdu = vmw_crtc_to_stdu(crtc);
dev_priv = vmw_priv(crtc->dev);
fb = crtc->primary->fb;
vfb = (fb) ? vmw_framebuffer_to_vfb(fb) : NULL;
if (vfb)
vmw_kms_add_active(dev_priv, &stdu->base, vfb);
else
vmw_kms_del_active(dev_priv, &stdu->base);
}
static void vmw_stdu_crtc_helper_disable(struct drm_crtc *crtc)
{
struct vmw_private *dev_priv;
struct vmw_screen_target_display_unit *stdu;
int ret;
if (!crtc) {
DRM_ERROR("CRTC is NULL\n");
return;
}
stdu = vmw_crtc_to_stdu(crtc);
dev_priv = vmw_priv(crtc->dev);
if (stdu->defined) {
ret = vmw_stdu_bind_st(dev_priv, stdu, NULL);
if (ret)
DRM_ERROR("Failed to blank CRTC\n");
(void) vmw_stdu_update_st(dev_priv, stdu);
ret = vmw_stdu_destroy_st(dev_priv, stdu);
if (ret)
DRM_ERROR("Failed to destroy Screen Target\n");
stdu->content_fb_type = SAME_AS_DISPLAY;
}
}
/**
* vmw_stdu_crtc_set_config - Sets a mode
*
......@@ -1113,6 +1213,21 @@ static const struct drm_plane_funcs vmw_stdu_cursor_funcs = {
};
/*
* Atomic Helpers
*/
static const struct drm_crtc_helper_funcs vmw_stdu_crtc_helper_funcs = {
.prepare = vmw_stdu_crtc_helper_prepare,
.commit = vmw_stdu_crtc_helper_commit,
.disable = vmw_stdu_crtc_helper_disable,
.mode_set = drm_helper_crtc_mode_set,
.mode_set_nofb = vmw_stdu_crtc_mode_set_nofb,
.atomic_check = vmw_du_crtc_atomic_check,
.atomic_begin = vmw_du_crtc_atomic_begin,
.atomic_flush = vmw_du_crtc_atomic_flush,
};
/**
* vmw_stdu_init - Sets up a Screen Target Display Unit
*
......@@ -1219,6 +1334,8 @@ static int vmw_stdu_init(struct vmw_private *dev_priv, unsigned unit)
goto err_free_unregister;
}
drm_crtc_helper_add(crtc, &vmw_stdu_crtc_helper_funcs);
drm_mode_crtc_set_gamma_size(crtc, 256);
drm_object_attach_property(&connector->base,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册