Skip to content

R
rt-thread

Mr_Pangza / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 2
Star 1
Fork 1
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 f74d7f16 编写于 作者: A ArdaFu
浏览文件
操作

[bsp] modify the uart_driver to fit the new rt-thread serial device driver... 

[bsp] modify the uart_driver to fit the new rt-thread serial device driver framework. Modify the template.uvproj for auto generate MDK project.
上级 3a1c1c45
显示空白变更内容
内联 并排
Showing with 152 addition and 958 deletion
bsp/tm4c129x/applications/application.c
浏览文件 @ f74d7f16
......@@ -20,8 +20,9 @@
void rt_init_thread_entry(void *parameter)
{
/* Initialization RT-Thread Components */
#ifdef RT_USING_COMPONENTS_INIT
rt_components_init();
#ifdef RT_USING_FINSH
finsh_set_device(RT_CONSOLE_DEVICE_NAME);
#endif
}
......
bsp/tm4c129x/applications/board.c
浏览文件 @ f74d7f16
......@@ -15,14 +15,14 @@
#include <rthw.h>
#include <rtthread.h>
#include <components.h>
#include "board.h"
#include "drv_uart.h"
#include "interrupt.h"
#include "sysctl.h"
#include "systick.h"
#include "fpu.h"
#include "driverlib/interrupt.h"
#include "driverlib/sysctl.h"
#include "driverlib/systick.h"
#include "driverlib/fpu.h"
#include "driverlib/rom_map.h"
#define SYS_CLOCK_DEFAULT 120000000
......@@ -56,7 +56,6 @@ void SysTick_Handler(void)
extern void PendSV_Handler(void);
extern void HardFault_Handler(void);
/**
* This function will initial LPC40xx board.
*/
......@@ -78,7 +77,8 @@ void rt_hw_board_init()
// TODO: The SYSCTL_XTAL_ value must be changed to match the value of the
// crystal on your board.
//
SysClock = MAP_SysCtlClockFreqSet((SYSCTL_XTAL_25MHZ | SYSCTL_OSC_MAIN | SYSCTL_USE_PLL | SYSCTL_CFG_VCO_480),
SysClock = MAP_SysCtlClockFreqSet(
(SYSCTL_XTAL_25MHZ | SYSCTL_OSC_MAIN | SYSCTL_USE_PLL | SYSCTL_CFG_VCO_480),
SYS_CLOCK_DEFAULT);
MAP_SysTickDisable();
......@@ -86,12 +86,12 @@ void rt_hw_board_init()
MAP_SysTickIntEnable();
MAP_SysTickEnable();
/* set pend exception priority */
//IntPrioritySet(FAULT_PENDSV, (1 << __NVIC_PRIO_BITS) - 1);
/*init uart device*/
IntPrioritySet(FAULT_PENDSV, (1 << 5) - 1);
/*init uart device*/
rt_hw_uart_init();
//redirect RTT stdio to CONSOLE device
rt_console_set_device(RT_CONSOLE_DEVICE_NAME);
//
// Enable interrupts to the processor.
......
bsp/tm4c129x/drivers/drv_uart.c
浏览文件 @ f74d7f16
......@@ -20,41 +20,83 @@
#include "board.h"
//#include <components.h>
#include "sysctl.h"
#include "gpio.h"
#include "uart.h"
#include "hw_memmap.h"
#include "pin_map.h"
#include "interrupt.h"
#include "rom.h"
#include "rom_map.h"
#include "inc/hw_memmap.h"
#include "driverlib/sysctl.h"
#include "driverlib/gpio.h"
#include "driverlib/uart.h"
#include "driverlib/pin_map.h"
#include "driverlib/interrupt.h"
#include "driverlib/rom_map.h"
typedef struct hw_uart_device
{
uint32_t hw_base; // base address
}hw_uart_t;
#define GetHwUartPtr(serial) ((hw_uart_t*)(serial->parent.user_data))
#define mUartGetHwPtr(serial) ((hw_uart_t*)(serial->parent.user_data))
static rt_err_t hw_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
{
uint32_t config;
hw_uart_t* uart;
RT_ASSERT(serial != RT_NULL);
uart = GetHwUartPtr(serial);
uart = mUartGetHwPtr(serial);
MAP_UARTDisable(uart->hw_base);
/* Initialize UART Configuration parameter structure to default state:
* Baudrate = 115200 bps
* 8 data bit
* 1 Stop bit
* None parity
*/
// build UART Configuration parameter structure
switch(cfg->data_bits)
{
case DATA_BITS_9:
// enable 9bit address mode and set DATA_BIT_8
MAP_UART9BitEnable(uart->hw_base);
case DATA_BITS_8:
config |= UART_CONFIG_WLEN_8;
break;
case DATA_BITS_7:
config |= UART_CONFIG_WLEN_7;
break;
case DATA_BITS_6:
config |= UART_CONFIG_WLEN_6;
break;
case DATA_BITS_5:
config |= UART_CONFIG_WLEN_5;
break;
default:
RT_ASSERT(0);
break;
}
switch(cfg->parity)
{
case PARITY_ODD:
config |= UART_CONFIG_PAR_ODD;
break;
case PARITY_EVEN:
config |= UART_CONFIG_PAR_EVEN;
break;
case PARITY_NONE:
config |= UART_CONFIG_PAR_NONE;
break;
default:
RT_ASSERT(0);
break;
}
switch(cfg->stop_bits)
{
case STOP_BITS_1:
config |= UART_CONFIG_STOP_ONE;
break;
case STOP_BITS_2:
config |= UART_CONFIG_STOP_TWO;
break;
default:
RT_ASSERT(0);
break;
}
// Initialize UART0 peripheral with given to corresponding parameter
MAP_UARTConfigSetExpClk(uart->hw_base, SysClock, cfg->baud_rate,
(UART_CONFIG_WLEN_8 | UART_CONFIG_STOP_ONE | UART_CONFIG_PAR_NONE));
MAP_UARTConfigSetExpClk(uart->hw_base, SysClock, cfg->baud_rate, config);
MAP_UARTFIFOEnable(uart->hw_base);
//
// Enable the UART.
//
MAP_UARTEnable(uart->hw_base);
return RT_EOK;
}
......@@ -63,7 +105,7 @@ static rt_err_t hw_control(struct rt_serial_device *serial, int cmd, void *arg)
{
hw_uart_t* uart;
RT_ASSERT(serial != RT_NULL);
uart = GetHwUartPtr(serial);
uart = mUartGetHwPtr(serial);
switch (cmd)
{
......@@ -84,7 +126,7 @@ static int hw_putc(struct rt_serial_device *serial, char c)
{
hw_uart_t* uart;
RT_ASSERT(serial != RT_NULL);
uart = GetHwUartPtr(serial);
uart = mUartGetHwPtr(serial);
MAP_UARTCharPut(uart->hw_base, *((uint8_t *)&c));
return 1;
......@@ -94,7 +136,7 @@ static int hw_getc(struct rt_serial_device *serial)
{
hw_uart_t* uart;
RT_ASSERT(serial != RT_NULL);
uart = GetHwUartPtr(serial);
uart = mUartGetHwPtr(serial);
return MAP_UARTCharGetNonBlocking(uart->hw_base);
}
......@@ -110,7 +152,6 @@ static const struct rt_uart_ops hw_uart_ops =
#if defined(RT_USING_UART0)
/* UART0 device driver structure */
struct rt_serial_device serial0;
struct serial_ringbuffer uart0_int_rx_buf;
hw_uart_t uart0 =
{
UART0_BASE,
......@@ -125,14 +166,13 @@ void UART0_IRQHandler(void)
rt_interrupt_enter();
/* Determine the interrupt source */
intsrc = UARTIntStatus(uart->hw_base, true);
intsrc = MAP_UARTIntStatus(uart->hw_base, true);
// Receive Data Available or Character time-out
if (intsrc & (UART_INT_RX | UART_INT_RT))
{
UARTIntClear(UART0_BASE, intsrc);
rt_hw_serial_isr(&serial0);
MAP_UARTIntClear(uart->hw_base, intsrc);
rt_hw_serial_isr(&serial0, RT_SERIAL_EVENT_RX_IND);
}
/* leave interrupt */
......@@ -145,47 +185,28 @@ int rt_hw_uart_init(void)
hw_uart_t* uart;
struct serial_configure config;
#ifdef RT_USING_UART0
uart = &uart0;
config.baud_rate = BAUD_RATE_115200;
config.bit_order = BIT_ORDER_LSB;
config.data_bits = DATA_BITS_8;
config.parity = PARITY_NONE;
config.stop_bits = STOP_BITS_1;
config.invert = NRZ_NORMAL;
config.bufsz = RT_SERIAL_RB_BUFSZ;
#ifdef RT_USING_UART0
uart = &uart0;
serial0.ops = &hw_uart_ops;
serial0.int_rx = &uart0_int_rx_buf;
serial0.config = config;
//
// Enable the peripherals used by this example.
// The UART itself needs to be enabled, as well as the GPIO port
// containing the pins that will be used.
//
MAP_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOA);
//
// Configure the GPIO pin muxing for the UART function.
// This is only necessary if your part supports GPIO pin function muxing.
// Study the data sheet to see which functions are allocated per pin.
// TODO: change this to select the port/pin you are using
//
MAP_GPIOPinConfigure(GPIO_PA0_U0RX);
MAP_GPIOPinConfigure(GPIO_PA1_U0TX);
//
// Since GPIO A0 and A1 are used for the UART function, they must be
// configured for use as a peripheral function (instead of GPIO).
// TODO: change this to match the port/pin you are using
//
MAP_GPIOPinTypeUART(GPIO_PORTA_BASE, GPIO_PIN_0 | GPIO_PIN_1);
MAP_SysCtlPeripheralEnable(SYSCTL_PERIPH_UART0);
/* preemption = 1, sub-priority = 1 */
//IntPrioritySet(INT_UART0, ((0x01 << 3) | 0x01));
IntPrioritySet(INT_UART0, ((0x01 << 5) | 0x01));
/* Enable Interrupt for UART channel */
UARTIntRegister(uart->hw_base, UART0_IRQHandler);
......@@ -194,7 +215,7 @@ int rt_hw_uart_init(void)
/* register UART0 device */
rt_hw_serial_register(&serial0, "uart0",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
#endif
return 0;
......
bsp/tm4c129x/project.uvproj 已删除 100644 → 0
浏览文件 @ 3a1c1c45
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
<SchemaVersion>1.1</SchemaVersion>
<Header>### uVision Project, (C) Keil Software</Header>
<Targets>
<Target>
<TargetName>Target 1</TargetName>
<ToolsetNumber>0x4</ToolsetNumber>
<ToolsetName>ARM-ADS</ToolsetName>
<TargetOption>
<TargetCommonOption>
<Device>TM4C1294NCZAD</Device>
<Vendor>Texas Instruments</Vendor>
<Cpu>IROM(0x00000000,0x100000) IRAM(0x20000000,0x040000) CPUTYPE("Cortex-M4") FPU2 CLOCK(120000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
<FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0TM4C129_1024 -FS00 -FL0100000 -FP0($$Device:TM4C1294NCZAD$Flash\TM4C129_1024.FLM))</FlashDriverDll>
<DeviceId>7089</DeviceId>
<RegisterFile>$$Device:TM4C1294NCZAD$Device\Include\TM4C129\TM4C129.h</RegisterFile>
<MemoryEnv></MemoryEnv>
<Cmp></Cmp>
<Asm></Asm>
<Linker></Linker>
<OHString></OHString>
<InfinionOptionDll></InfinionOptionDll>
<SLE66CMisc>-DTM4C1294NCZAD</SLE66CMisc>
<SLE66AMisc></SLE66AMisc>
<SLE66LinkerMisc></SLE66LinkerMisc>
<SFDFile>$$Device:TM4C1294NCZAD$SVD\TM4C129\TM4C1294NCZAD.svd</SFDFile>
<bCustSvd>0</bCustSvd>
<UseEnv>0</UseEnv>
<BinPath></BinPath>
<IncludePath></IncludePath>
<LibPath></LibPath>
<RegisterFilePath></RegisterFilePath>
<DBRegisterFilePath></DBRegisterFilePath>
<TargetStatus>
<Error>0</Error>
<ExitCodeStop>0</ExitCodeStop>
<ButtonStop>0</ButtonStop>
<NotGenerated>0</NotGenerated>
<InvalidFlash>1</InvalidFlash>
</TargetStatus>
<OutputDirectory>.\keil_bulid\</OutputDirectory>
<OutputName>project</OutputName>
<CreateExecutable>1</CreateExecutable>
<CreateLib>0</CreateLib>
<CreateHexFile>0</CreateHexFile>
<DebugInformation>1</DebugInformation>
<BrowseInformation>1</BrowseInformation>
<ListingPath>.\keil_bulid\</ListingPath>
<HexFormatSelection>1</HexFormatSelection>
<Merge32K>0</Merge32K>
<CreateBatchFile>1</CreateBatchFile>
<BeforeCompile>
<RunUserProg1>0</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name></UserProg1Name>
<UserProg2Name></UserProg2Name>
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
<nStopU1X>0</nStopU1X>
<nStopU2X>0</nStopU2X>
</BeforeCompile>
<BeforeMake>
<RunUserProg1>0</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name></UserProg1Name>
<UserProg2Name></UserProg2Name>
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
<nStopB1X>0</nStopB1X>
<nStopB2X>0</nStopB2X>
</BeforeMake>
<AfterMake>
<RunUserProg1>0</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name></UserProg1Name>
<UserProg2Name></UserProg2Name>
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
</AfterMake>
<SelectedForBatchBuild>0</SelectedForBatchBuild>
<SVCSIdString></SVCSIdString>
</TargetCommonOption>
<CommonProperty>
<UseCPPCompiler>0</UseCPPCompiler>
<RVCTCodeConst>0</RVCTCodeConst>
<RVCTZI>0</RVCTZI>
<RVCTOtherData>0</RVCTOtherData>
<ModuleSelection>0</ModuleSelection>
<IncludeInBuild>1</IncludeInBuild>
<AlwaysBuild>0</AlwaysBuild>
<GenerateAssemblyFile>0</GenerateAssemblyFile>
<AssembleAssemblyFile>0</AssembleAssemblyFile>
<PublicsOnly>0</PublicsOnly>
<StopOnExitCode>3</StopOnExitCode>
<CustomArgument></CustomArgument>
<IncludeLibraryModules></IncludeLibraryModules>
<ComprImg>1</ComprImg>
</CommonProperty>
<DllOption>
<SimDllName>SARMCM3.DLL</SimDllName>
<SimDllArguments>-MPU</SimDllArguments>
<SimDlgDll>DCM.DLL</SimDlgDll>
<SimDlgDllArguments>-pCM4</SimDlgDllArguments>
<TargetDllName>SARMCM3.DLL</TargetDllName>
<TargetDllArguments>-MPU</TargetDllArguments>
<TargetDlgDll>TCM.DLL</TargetDlgDll>
<TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
</DllOption>
<DebugOption>
<OPTHX>
<HexSelection>1</HexSelection>
<HexRangeLowAddress>0</HexRangeLowAddress>
<HexRangeHighAddress>0</HexRangeHighAddress>
<HexOffset>0</HexOffset>
<Oh166RecLen>16</Oh166RecLen>
</OPTHX>
<Simulator>
<UseSimulator>0</UseSimulator>
<LoadApplicationAtStartup>1</LoadApplicationAtStartup>
<RunToMain>1</RunToMain>
<RestoreBreakpoints>1</RestoreBreakpoints>
<RestoreWatchpoints>1</RestoreWatchpoints>
<RestoreMemoryDisplay>1</RestoreMemoryDisplay>
<RestoreFunctions>1</RestoreFunctions>
<RestoreToolbox>1</RestoreToolbox>
<LimitSpeedToRealTime>0</LimitSpeedToRealTime>
<RestoreSysVw>1</RestoreSysVw>
</Simulator>
<Target>
<UseTarget>1</UseTarget>
<LoadApplicationAtStartup>1</LoadApplicationAtStartup>
<RunToMain>1</RunToMain>
<RestoreBreakpoints>1</RestoreBreakpoints>
<RestoreWatchpoints>1</RestoreWatchpoints>
<RestoreMemoryDisplay>1</RestoreMemoryDisplay>
<RestoreFunctions>0</RestoreFunctions>
<RestoreToolbox>1</RestoreToolbox>
<RestoreTracepoints>1</RestoreTracepoints>
<RestoreSysVw>1</RestoreSysVw>
<UsePdscDebugDescription>1</UsePdscDebugDescription>
</Target>
<RunDebugAfterBuild>0</RunDebugAfterBuild>
<TargetSelection>3</TargetSelection>
<SimDlls>
<CpuDll></CpuDll>
<CpuDllArguments></CpuDllArguments>
<PeripheralDll></PeripheralDll>
<PeripheralDllArguments></PeripheralDllArguments>
<InitializationFile></InitializationFile>
</SimDlls>
<TargetDlls>
<CpuDll></CpuDll>
<CpuDllArguments></CpuDllArguments>
<PeripheralDll></PeripheralDll>
<PeripheralDllArguments></PeripheralDllArguments>
<InitializationFile></InitializationFile>
<Driver>BIN\lmidk-agdi.dll</Driver>
</TargetDlls>
</DebugOption>
<Utilities>
<Flash1>
<UseTargetDll>1</UseTargetDll>
<UseExternalTool>0</UseExternalTool>
<RunIndependent>0</RunIndependent>
<UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
<Capability>1</Capability>
<DriverSelection>4096</DriverSelection>
</Flash1>
<bUseTDR>1</bUseTDR>
<Flash2>BIN\UL2CM3.DLL</Flash2>
<Flash3>"" ()</Flash3>
<Flash4></Flash4>
<pFcarmOut></pFcarmOut>
<pFcarmGrp></pFcarmGrp>
<pFcArmRoot></pFcArmRoot>
<FcArmLst>0</FcArmLst>
</Utilities>
<TargetArmAds>
<ArmAdsMisc>
<GenerateListings>0</GenerateListings>
<asHll>1</asHll>
<asAsm>1</asAsm>
<asMacX>1</asMacX>
<asSyms>1</asSyms>
<asFals>1</asFals>
<asDbgD>1</asDbgD>
<asForm>1</asForm>
<ldLst>0</ldLst>
<ldmm>1</ldmm>
<ldXref>1</ldXref>
<BigEnd>0</BigEnd>
<AdsALst>1</AdsALst>
<AdsACrf>1</AdsACrf>
<AdsANop>0</AdsANop>
<AdsANot>0</AdsANot>
<AdsLLst>1</AdsLLst>
<AdsLmap>1</AdsLmap>
<AdsLcgr>1</AdsLcgr>
<AdsLsym>1</AdsLsym>
<AdsLszi>1</AdsLszi>
<AdsLtoi>1</AdsLtoi>
<AdsLsun>1</AdsLsun>
<AdsLven>1</AdsLven>
<AdsLsxf>1</AdsLsxf>
<RvctClst>0</RvctClst>
<GenPPlst>0</GenPPlst>
<AdsCpuType>"Cortex-M4"</AdsCpuType>
<RvctDeviceName></RvctDeviceName>
<mOS>0</mOS>
<uocRom>0</uocRom>
<uocRam>0</uocRam>
<hadIROM>1</hadIROM>
<hadIRAM>1</hadIRAM>
<hadXRAM>0</hadXRAM>
<uocXRam>0</uocXRam>
<RvdsVP>2</RvdsVP>
<hadIRAM2>0</hadIRAM2>
<hadIROM2>0</hadIROM2>
<StupSel>8</StupSel>
<useUlib>0</useUlib>
<EndSel>0</EndSel>
<uLtcg>0</uLtcg>
<RoSelD>3</RoSelD>
<RwSelD>3</RwSelD>
<CodeSel>0</CodeSel>
<OptFeed>0</OptFeed>
<NoZi1>0</NoZi1>
<NoZi2>0</NoZi2>
<NoZi3>0</NoZi3>
<NoZi4>0</NoZi4>
<NoZi5>0</NoZi5>
<Ro1Chk>0</Ro1Chk>
<Ro2Chk>0</Ro2Chk>
<Ro3Chk>0</Ro3Chk>
<Ir1Chk>1</Ir1Chk>
<Ir2Chk>0</Ir2Chk>
<Ra1Chk>0</Ra1Chk>
<Ra2Chk>0</Ra2Chk>
<Ra3Chk>0</Ra3Chk>
<Im1Chk>1</Im1Chk>
<Im2Chk>0</Im2Chk>
<OnChipMemories>
<Ocm1>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</Ocm1>
<Ocm2>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</Ocm2>
<Ocm3>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</Ocm3>
<Ocm4>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</Ocm4>
<Ocm5>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</Ocm5>
<Ocm6>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</Ocm6>
<IRAM>
<Type>0</Type>
<StartAddress>0x20000000</StartAddress>
<Size>0x40000</Size>
</IRAM>
<IROM>
<Type>1</Type>
<StartAddress>0x0</StartAddress>
<Size>0x100000</Size>
</IROM>
<XRAM>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</XRAM>
<OCR_RVCT1>
<Type>1</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT1>
<OCR_RVCT2>
<Type>1</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT2>
<OCR_RVCT3>
<Type>1</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT3>
<OCR_RVCT4>
<Type>1</Type>
<StartAddress>0x0</StartAddress>
<Size>0x100000</Size>
</OCR_RVCT4>
<OCR_RVCT5>
<Type>1</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT5>
<OCR_RVCT6>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT6>
<OCR_RVCT7>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT7>
<OCR_RVCT8>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT8>
<OCR_RVCT9>
<Type>0</Type>
<StartAddress>0x20000000</StartAddress>
<Size>0x40000</Size>
</OCR_RVCT9>
<OCR_RVCT10>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT10>
</OnChipMemories>
<RvctStartVector></RvctStartVector>
</ArmAdsMisc>
<Cads>
<interw>1</interw>
<Optim>1</Optim>
<oTime>0</oTime>
<SplitLS>0</SplitLS>
<OneElfS>0</OneElfS>
<Strict>0</Strict>
<EnumInt>0</EnumInt>
<PlainCh>0</PlainCh>
<Ropi>0</Ropi>
<Rwpi>0</Rwpi>
<wLevel>2</wLevel>
<uThumb>0</uThumb>
<uSurpInc>0</uSurpInc>
<uC99>0</uC99>
<useXO>0</useXO>
<VariousControls>
<MiscControls></MiscControls>
<Define>PART_TM4C129XNCZAD</Define>
<Undefine></Undefine>
<IncludePath>..\..\src;..\..\include;..\..\libcpu\arm\cortex-m4;..\..\components\drivers\include;..\..\components\drivers\include\drivers;..\..\components\finsh;..\tm4c129x;.\libraries\driverlib;.\libraries\inc;.\libraries\startup;.\libraries;.\drivers;.\applications;..\..\components\init</IncludePath>
</VariousControls>
</Cads>
<Aads>
<interw>1</interw>
<Ropi>0</Ropi>
<Rwpi>0</Rwpi>
<thumb>0</thumb>
<SplitLS>0</SplitLS>
<SwStkChk>0</SwStkChk>
<NoWarn>0</NoWarn>
<uSurpInc>0</uSurpInc>
<useXO>0</useXO>
<VariousControls>
<MiscControls></MiscControls>
<Define>PART_TM4C129XNCZAD</Define>
<Undefine></Undefine>
<IncludePath></IncludePath>
</VariousControls>
</Aads>
<LDads>
<umfTarg>0</umfTarg>
<Ropi>0</Ropi>
<Rwpi>1</Rwpi>
<noStLib>0</noStLib>
<RepFail>1</RepFail>
<useFile>0</useFile>
<TextAddressRange>0x00000000</TextAddressRange>
<DataAddressRange>0x00000000</DataAddressRange>
<pXoBase></pXoBase>
<ScatterFile>project.sct</ScatterFile>
<IncludeLibs></IncludeLibs>
<IncludeLibsPath></IncludeLibsPath>
<Misc></Misc>
<LinkerInputFile></LinkerInputFile>
<DisabledWarnings></DisabledWarnings>
</LDads>
</TargetArmAds>
</TargetOption>
<Groups>
<Group>
<GroupName>applcaitions</GroupName>
<Files>
<File>
<FileName>application.c</FileName>
<FileType>1</FileType>
<FilePath>.\applications\application.c</FilePath>
</File>
<File>
<FileName>board.c</FileName>
<FileType>1</FileType>
<FilePath>.\applications\board.c</FilePath>
</File>
<File>
<FileName>startup.c</FileName>
<FileType>1</FileType>
<FilePath>.\applications\startup.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>drivers</GroupName>
<Files>
<File>
<FileName>drv_uart.c</FileName>
<FileType>1</FileType>
<FilePath>.\drivers\drv_uart.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>libraries</GroupName>
<Files>
<File>
<FileName>adc.c</FileName>
<FileType>1</FileType>
<FilePath>.\libraries\driverlib\adc.c</FilePath>
</File>
<File>
<FileName>aes.c</FileName>
<FileType>1</FileType>
<FilePath>.\libraries\driverlib\aes.c</FilePath>
</File>
<File>
<FileName>can.c</FileName>
<FileType>1</FileType>
<FilePath>.\libraries\driverlib\can.c</FilePath>
</File>
<File>
<FileName>comp.c</FileName>
<FileType>1</FileType>
<FilePath>.\libraries\driverlib\comp.c</FilePath>
</File>
<File>
<FileName>cpu.c</FileName>
<FileType>1</FileType>
<FilePath>.\libraries\driverlib\cpu.c</FilePath>
</File>
<File>
<FileName>crc.c</FileName>
<FileType>1</FileType>
<FilePath>.\libraries\driverlib\crc.c</FilePath>
</File>
<File>
<FileName>des.c</FileName>
<FileType>1</FileType>
<FilePath>.\libraries\driverlib\des.c</FilePath>
</File>
<File>
<FileName>eeprom.c</FileName>
<FileType>1</FileType>
<FilePath>.\libraries\driverlib\eeprom.c</FilePath>
</File>
<File>
<FileName>emac.c</FileName>
<FileType>1</FileType>
<FilePath>.\libraries\driverlib\emac.c</FilePath>
</File>
<File>
<FileName>epi.c</FileName>
<FileType>1</FileType>
<FilePath>.\libraries\driverlib\epi.c</FilePath>
</File>
<File>
<FileName>flash.c</FileName>
<FileType>1</FileType>
<FilePath>.\libraries\driverlib\flash.c</FilePath>
</File>
<File>
<FileName>fpu.c</FileName>
<FileType>1</FileType>
<FilePath>.\libraries\driverlib\fpu.c</FilePath>
</File>
<File>
<FileName>gpio.c</FileName>
<FileType>1</FileType>
<FilePath>.\libraries\driverlib\gpio.c</FilePath>
</File>
<File>
<FileName>hibernate.c</FileName>
<FileType>1</FileType>
<FilePath>.\libraries\driverlib\hibernate.c</FilePath>
</File>
<File>
<FileName>i2c.c</FileName>
<FileType>1</FileType>
<FilePath>.\libraries\driverlib\i2c.c</FilePath>
</File>
<File>
<FileName>interrupt.c</FileName>
<FileType>1</FileType>
<FilePath>.\libraries\driverlib\interrupt.c</FilePath>
</File>
<File>
<FileName>lcd.c</FileName>
<FileType>1</FileType>
<FilePath>.\libraries\driverlib\lcd.c</FilePath>
</File>
<File>
<FileName>mpu.c</FileName>
<FileType>1</FileType>
<FilePath>.\libraries\driverlib\mpu.c</FilePath>
</File>
<File>
<FileName>pwm.c</FileName>
<FileType>1</FileType>
<FilePath>.\libraries\driverlib\pwm.c</FilePath>
</File>
<File>
<FileName>qei.c</FileName>
<FileType>1</FileType>
<FilePath>.\libraries\driverlib\qei.c</FilePath>
</File>
<File>
<FileName>shamd5.c</FileName>
<FileType>1</FileType>
<FilePath>.\libraries\driverlib\shamd5.c</FilePath>
</File>
<File>
<FileName>ssi.c</FileName>
<FileType>1</FileType>
<FilePath>.\libraries\driverlib\ssi.c</FilePath>
</File>
<File>
<FileName>sw_crc.c</FileName>
<FileType>1</FileType>
<FilePath>.\libraries\driverlib\sw_crc.c</FilePath>
</File>
<File>
<FileName>sysctl.c</FileName>
<FileType>1</FileType>
<FilePath>.\libraries\driverlib\sysctl.c</FilePath>
</File>
<File>
<FileName>sysexc.c</FileName>
<FileType>1</FileType>
<FilePath>.\libraries\driverlib\sysexc.c</FilePath>
</File>
<File>
<FileName>systick.c</FileName>
<FileType>1</FileType>
<FilePath>.\libraries\driverlib\systick.c</FilePath>
</File>
<File>
<FileName>uart.c</FileName>
<FileType>1</FileType>
<FilePath>.\libraries\driverlib\uart.c</FilePath>
</File>
<File>
<FileName>udma.c</FileName>
<FileType>1</FileType>
<FilePath>.\libraries\driverlib\udma.c</FilePath>
</File>
<File>
<FileName>usb.c</FileName>
<FileType>1</FileType>
<FilePath>.\libraries\driverlib\usb.c</FilePath>
</File>
<File>
<FileName>watchdog.c</FileName>
<FileType>1</FileType>
<FilePath>.\libraries\driverlib\watchdog.c</FilePath>
</File>
<File>
<FileName>startup_rvmdk.S</FileName>
<FileType>2</FileType>
<FilePath>.\libraries\startup\startup_rvmdk.S</FilePath>
</File>
<File>
<FileName>tiva_timer.c</FileName>
<FileType>1</FileType>
<FilePath>.\libraries\driverlib\tiva_timer.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>rt_core</GroupName>
<Files>
<File>
<FileName>clock.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\clock.c</FilePath>
</File>
<File>
<FileName>device.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\device.c</FilePath>
</File>
<File>
<FileName>idle.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\idle.c</FilePath>
</File>
<File>
<FileName>ipc.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\ipc.c</FilePath>
</File>
<File>
<FileName>irq.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\irq.c</FilePath>
</File>
<File>
<FileName>kservice.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\kservice.c</FilePath>
</File>
<File>
<FileName>mem.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\mem.c</FilePath>
</File>
<File>
<FileName>memheap.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\memheap.c</FilePath>
</File>
<File>
<FileName>mempool.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\mempool.c</FilePath>
</File>
<File>
<FileName>module.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\module.c</FilePath>
</File>
<File>
<FileName>object.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\object.c</FilePath>
</File>
<File>
<FileName>scheduler.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\scheduler.c</FilePath>
</File>
<File>
<FileName>slab.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\slab.c</FilePath>
</File>
<File>
<FileName>thread.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\thread.c</FilePath>
</File>
<File>
<FileName>timer.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\timer.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>finsh</GroupName>
<Files>
<File>
<FileName>cmd.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\finsh\cmd.c</FilePath>
</File>
<File>
<FileName>finsh_compiler.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\finsh\finsh_compiler.c</FilePath>
</File>
<File>
<FileName>finsh_error.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\finsh\finsh_error.c</FilePath>
</File>
<File>
<FileName>finsh_heap.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\finsh\finsh_heap.c</FilePath>
</File>
<File>
<FileName>finsh_init.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\finsh\finsh_init.c</FilePath>
</File>
<File>
<FileName>finsh_node.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\finsh\finsh_node.c</FilePath>
</File>
<File>
<FileName>finsh_ops.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\finsh\finsh_ops.c</FilePath>
</File>
<File>
<FileName>finsh_parser.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\finsh\finsh_parser.c</FilePath>
</File>
<File>
<FileName>finsh_token.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\finsh\finsh_token.c</FilePath>
</File>
<File>
<FileName>finsh_var.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\finsh\finsh_var.c</FilePath>
</File>
<File>
<FileName>finsh_vm.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\finsh\finsh_vm.c</FilePath>
</File>
<File>
<FileName>msh.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\finsh\msh.c</FilePath>
</File>
<File>
<FileName>msh_cmd.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\finsh\msh_cmd.c</FilePath>
</File>
<File>
<FileName>shell.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\finsh\shell.c</FilePath>
</File>
<File>
<FileName>symbol.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\finsh\symbol.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>rt_hw</GroupName>
<Files>
<File>
<FileName>serial.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\drivers\serial\serial.c</FilePath>
</File>
<File>
<FileName>completion.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\drivers\src\completion.c</FilePath>
</File>
<File>
<FileName>dataqueue.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\drivers\src\dataqueue.c</FilePath>
</File>
<File>
<FileName>pipe.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\drivers\src\pipe.c</FilePath>
</File>
<File>
<FileName>portal.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\drivers\src\portal.c</FilePath>
</File>
<File>
<FileName>ringbuffer.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\drivers\src\ringbuffer.c</FilePath>
</File>
<File>
<FileName>workqueue.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\drivers\src\workqueue.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>rt_components</GroupName>
<Files>
<File>
<FileName>components.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\components\init\components.c</FilePath>
</File>
<File>
<FileName>rtconfig.h</FileName>
<FileType>5</FileType>
<FilePath>.\rtconfig.h</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>cpusupport</GroupName>
<Files>
<File>
<FileName>cpuport.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\libcpu\arm\cortex-m4\cpuport.c</FilePath>
</File>
<File>
<FileName>context_rvds.S</FileName>
<FileType>2</FileType>
<FilePath>..\..\libcpu\arm\cortex-m4\context_rvds.S</FilePath>
</File>
<File>
<FileName>backtrace.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\libcpu\arm\common\backtrace.c</FilePath>
</File>
<File>
<FileName>div0.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\libcpu\arm\common\div0.c</FilePath>
</File>
<File>
<FileName>showmem.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\libcpu\arm\common\showmem.c</FilePath>
</File>
</Files>
</Group>
</Groups>
</Target>
</Targets>
</Project>
bsp/tm4c129x/template.uvproj
浏览文件 @ f74d7f16
......@@ -7,35 +7,38 @@
<Targets>
<Target>
<TargetName>rt-thread_lm4f232</TargetName>
<TargetName>RT-Thread TM4C129X</TargetName>
<ToolsetNumber>0x4</ToolsetNumber>
<ToolsetName>ARM-ADS</ToolsetName>
<TargetOption>
<TargetCommonOption>
<Device>LM4F232H5QD</Device>
<Device>TM4C129XNCZAD</Device>
<Vendor>Texas Instruments</Vendor>
<Cpu>IRAM(0x20000000-0x20007FFF) IROM(0-0x3FFFF) CLOCK(16000000) CPUTYPE("Cortex-M4") FPU2</Cpu>
<PackID>Keil.TM4C_DFP.1.0.0</PackID>
<PackURL>http://www.keil.com/pack/</PackURL>
<Cpu>IROM(0x00000000,0x100000) IRAM(0x20000000,0x040000) CPUTYPE("Cortex-M4") FPU2 CLOCK(120000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile>"STARTUP\Luminary\Startup.s" ("Luminary Startup Code")</StartupFile>
<FlashDriverDll>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0LM4F_256 -FS00 -FL040000)</FlashDriverDll>
<DeviceId>5931</DeviceId>
<RegisterFile>LM4Fxxxx.H</RegisterFile>
<StartupFile></StartupFile>
<FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0TM4C129_1024 -FS00 -FL0100000 -FP0($$Device:TM4C129XNCZAD$Flash\TM4C129_1024.FLM))</FlashDriverDll>
<DeviceId>7096</DeviceId>
<RegisterFile>$$Device:TM4C129XNCZAD$Device\Include\TM4C129\TM4C129.h</RegisterFile>
<MemoryEnv></MemoryEnv>
<Cmp></Cmp>
<Asm></Asm>
<Linker></Linker>
<OHString></OHString>
<InfinionOptionDll></InfinionOptionDll>
<SLE66CMisc></SLE66CMisc>
<SLE66CMisc>-DTM4C129XNCZAD</SLE66CMisc>
<SLE66AMisc></SLE66AMisc>
<SLE66LinkerMisc></SLE66LinkerMisc>
<SFDFile>SFD\Luminary\LM4F232H5QD.SFR</SFDFile>
<SFDFile>$$Device:TM4C129XNCZAD$SVD\TM4C129\TM4C129XNCZAD.svd</SFDFile>
<bCustSvd>0</bCustSvd>
<UseEnv>0</UseEnv>
<BinPath></BinPath>
<IncludePath></IncludePath>
<LibPath></LibPath>
<RegisterFilePath>Luminary\</RegisterFilePath>
<DBRegisterFilePath>Luminary\</DBRegisterFilePath>
<RegisterFilePath></RegisterFilePath>
<DBRegisterFilePath></DBRegisterFilePath>
<TargetStatus>
<Error>0</Error>
<ExitCodeStop>0</ExitCodeStop>
......@@ -44,13 +47,13 @@
<InvalidFlash>1</InvalidFlash>
</TargetStatus>
<OutputDirectory>.\build\</OutputDirectory>
<OutputName>project</OutputName>
<OutputName>rtthread-tm4c</OutputName>
<CreateExecutable>1</CreateExecutable>
<CreateLib>0</CreateLib>
<CreateHexFile>0</CreateHexFile>
<DebugInformation>1</DebugInformation>
<BrowseInformation>1</BrowseInformation>
<ListingPath>.\build\</ListingPath>
<BrowseInformation>0</BrowseInformation>
<ListingPath>.\</ListingPath>
<HexFormatSelection>1</HexFormatSelection>
<Merge32K>0</Merge32K>
<CreateBatchFile>0</CreateBatchFile>
......@@ -61,6 +64,8 @@
<UserProg2Name></UserProg2Name>
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
<nStopU1X>0</nStopU1X>
<nStopU2X>0</nStopU2X>
</BeforeCompile>
<BeforeMake>
<RunUserProg1>0</RunUserProg1>
......@@ -69,6 +74,8 @@
<UserProg2Name></UserProg2Name>
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
<nStopB1X>0</nStopB1X>
<nStopB2X>0</nStopB2X>
</BeforeMake>
<AfterMake>
<RunUserProg1>0</RunUserProg1>
......@@ -95,6 +102,7 @@
<StopOnExitCode>3</StopOnExitCode>
<CustomArgument></CustomArgument>
<IncludeLibraryModules></IncludeLibraryModules>
<ComprImg>1</ComprImg>
</CommonProperty>
<DllOption>
<SimDllName>SARMCM3.DLL</SimDllName>
......@@ -124,6 +132,7 @@
<RestoreFunctions>1</RestoreFunctions>
<RestoreToolbox>1</RestoreToolbox>
<LimitSpeedToRealTime>0</LimitSpeedToRealTime>
<RestoreSysVw>1</RestoreSysVw>
</Simulator>
<Target>
<UseTarget>1</UseTarget>
......@@ -134,9 +143,12 @@
<RestoreMemoryDisplay>1</RestoreMemoryDisplay>
<RestoreFunctions>0</RestoreFunctions>
<RestoreToolbox>1</RestoreToolbox>
<RestoreTracepoints>1</RestoreTracepoints>
<RestoreSysVw>1</RestoreSysVw>
<UsePdscDebugDescription>1</UsePdscDebugDescription>
</Target>
<RunDebugAfterBuild>0</RunDebugAfterBuild>
<TargetSelection>4</TargetSelection>
<TargetSelection>3</TargetSelection>
<SimDlls>
<CpuDll></CpuDll>
<CpuDllArguments></CpuDllArguments>
......@@ -158,13 +170,18 @@
<UseTargetDll>1</UseTargetDll>
<UseExternalTool>0</UseExternalTool>
<RunIndependent>0</RunIndependent>
<UpdateFlashBeforeDebugging>0</UpdateFlashBeforeDebugging>
<UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
<Capability>1</Capability>
<DriverSelection>4097</DriverSelection>
<DriverSelection>4096</DriverSelection>
</Flash1>
<Flash2>BIN\lmidk-agdi.dll</Flash2>
<bUseTDR>1</bUseTDR>
<Flash2>BIN\UL2CM3.DLL</Flash2>
<Flash3>"" ()</Flash3>
<Flash4></Flash4>
<pFcarmOut></pFcarmOut>
<pFcarmGrp></pFcarmGrp>
<pFcArmRoot></pFcArmRoot>
<FcArmLst>0</FcArmLst>
</Utilities>
<TargetArmAds>
<ArmAdsMisc>
......@@ -208,7 +225,7 @@
<hadIRAM2>0</hadIRAM2>
<hadIROM2>0</hadIROM2>
<StupSel>8</StupSel>
<useUlib>1</useUlib>
<useUlib>0</useUlib>
<EndSel>0</EndSel>
<uLtcg>0</uLtcg>
<RoSelD>3</RoSelD>
......@@ -264,12 +281,12 @@
<IRAM>
<Type>0</Type>
<StartAddress>0x20000000</StartAddress>
<Size>0x8000</Size>
<Size>0x40000</Size>
</IRAM>
<IROM>
<Type>1</Type>
<StartAddress>0x0</StartAddress>
<Size>0x40000</Size>
<Size>0x100000</Size>
</IROM>
<XRAM>
<Type>0</Type>
......@@ -294,7 +311,7 @@
<OCR_RVCT4>
<Type>1</Type>
<StartAddress>0x0</StartAddress>
<Size>0x40000</Size>
<Size>0x100000</Size>
</OCR_RVCT4>
<OCR_RVCT5>
<Type>1</Type>
......@@ -319,7 +336,7 @@
<OCR_RVCT9>
<Type>0</Type>
<StartAddress>0x20000000</StartAddress>
<Size>0x8000</Size>
<Size>0x40000</Size>
</OCR_RVCT9>
<OCR_RVCT10>
<Type>0</Type>
......@@ -334,14 +351,17 @@
<Optim>1</Optim>
<oTime>0</oTime>
<SplitLS>0</SplitLS>
<OneElfS>1</OneElfS>
<OneElfS>0</OneElfS>
<Strict>0</Strict>
<EnumInt>0</EnumInt>
<PlainCh>0</PlainCh>
<Ropi>0</Ropi>
<Rwpi>0</Rwpi>
<wLevel>0</wLevel>
<wLevel>2</wLevel>
<uThumb>0</uThumb>
<uSurpInc>0</uSurpInc>
<uC99>0</uC99>
<useXO>0</useXO>
<VariousControls>
<MiscControls></MiscControls>
<Define></Define>
......@@ -357,6 +377,8 @@
<SplitLS>0</SplitLS>
<SwStkChk>0</SwStkChk>
<NoWarn>0</NoWarn>
<uSurpInc>0</uSurpInc>
<useXO>0</useXO>
<VariousControls>
<MiscControls></MiscControls>
<Define></Define>
......@@ -372,8 +394,9 @@
<RepFail>1</RepFail>
<useFile>0</useFile>
<TextAddressRange>0x00000000</TextAddressRange>
<DataAddressRange>0x20000000</DataAddressRange>
<ScatterFile></ScatterFile>
<DataAddressRange>0x00000000</DataAddressRange>
<pXoBase></pXoBase>
<ScatterFile>tm4c_rom.sct</ScatterFile>
<IncludeLibs></IncludeLibs>
<IncludeLibsPath></IncludeLibsPath>
<Misc></Misc>
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或