Skip to content

R
rt-thread

Mr_Pangza / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 2
Star 1
Fork 1
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 05481094 编写于 作者: F FindYGL
浏览文件
操作

修改之前BSP版本存在的一些问题，使之符合规范

上级 f1a13e1f
显示空白变更内容
内联 并排
Showing with 181 addition and 168 deletion
bsp/stm32/stm32f103-dofly-lyc8/.config
浏览文件 @ 05481094
...@@ -320,7 +320,7 @@ CONFIG_SOC_SERIES_STM32F1=y ...@@ -320,7 +320,7 @@ CONFIG_SOC_SERIES_STM32F1=y
# #
# Hardware Drivers Config # Hardware Drivers Config
# #
CONFIG_SOC_STM32F103c8=y CONFIG_SOC_STM32F103C8=y
# #
# Onboard Peripheral Drivers # Onboard Peripheral Drivers
...@@ -329,8 +329,10 @@ CONFIG_SOC_STM32F103c8=y ...@@ -329,8 +329,10 @@ CONFIG_SOC_STM32F103c8=y
# #
# On-chip Peripheral Drivers # On-chip Peripheral Drivers
# #
# CONFIG_BSP_USING_GPIO is not set CONFIG_BSP_USING_GPIO=y
CONFIG_BSP_USING_UART=y
CONFIG_BSP_USING_UART1=y CONFIG_BSP_USING_UART1=y
# CONFIG_BSP_UART1_RX_USING_DMA is not set
# #
# Board extended module Drivers # Board extended module Drivers
......
bsp/stm32/stm32f103-dofly-lyc8/README.md
浏览文件 @ 05481094
# STM32F103 霸道开发板 BSP 说明 # STM32F103 德飞莱开发板 BSP 说明
## 简介 ## 简介
...@@ -26,7 +26,6 @@ LY-STM32F103C8V1.2 是德飞莱推出的一款基于 ARM Cortex-M3 内核的开 ...@@ -26,7 +26,6 @@ LY-STM32F103C8V1.2 是德飞莱推出的一款基于 ARM Cortex-M3 内核的开
- MCU：STM32F103C8T6，主频 72MHz，64KB FLASH ，20KB RAM - MCU：STM32F103C8T6，主频 72MHz，64KB FLASH ，20KB RAM
- 常用外设 - 常用外设
- LED：1个普通LED，LED1（红色，PB8） - LED：1个普通LED，LED1（红色，PB8）
- 常用接口：USB 转串口
- 调试接口，标准 JTAG/SWD - 调试接口，标准 JTAG/SWD
## 外设支持 ## 外设支持
...@@ -35,14 +34,14 @@ LY-STM32F103C8V1.2 是德飞莱推出的一款基于 ARM Cortex-M3 内核的开 ...@@ -35,14 +34,14 @@ LY-STM32F103C8V1.2 是德飞莱推出的一款基于 ARM Cortex-M3 内核的开
| **板载外设** | **支持情况** | **备注** | | **板载外设** | **支持情况** | **备注** |
| :----------------- | :----------: | :------------------------------------- | | :----------------- | :----------: | :------------------------------------- |
| USB 转串口 | 支持 | | | 红色LED | 支持 | 使用PB8 |
| **片上外设** | **支持情况** | **备注** | | **片上外设** | **支持情况** | **备注** |
| GPIO | 支持 | PA0, PA1... PB15 ---> PIN: 0, 1...47| | GPIO | 支持 | PA0, PA1... PB15 ---> PIN: 0, 1...47|
| UART | 支持 | UART1 | | UART | 支持 | UART1 |
| SPI | 暂不支持 | | | SPI | 暂不支持 | 即将支持 |
| I2C | 暂不支持 | | | I2C | 暂不支持 | 即将支持 |
| RTC | 暂不支持 | | | ADC | 暂不支持 | 即将支持 |
| PWM | 暂不支持 | | | PWM | 暂不支持 | 即将支持 |
| **扩展模块** | **支持情况** | **备注** | | **扩展模块** | **支持情况** | **备注** |
| | | | | | | |
...@@ -88,7 +87,7 @@ msh > ...@@ -88,7 +87,7 @@ msh >
``` ```
### 进阶使用 ### 进阶使用
此 BSP 默认只开启了 GPIO 和 串口1 的功能，如果需使用 SD 卡、Flash 等更多高级功能，需要利用 ENV 工具对BSP 进行配置，步骤如下： 此 BSP 默认只开启了 GPIO 和 串口1 的功能，如果需使用 ADC、PWM等更多高级功能，需要利用 ENV 工具对BSP 进行配置，步骤如下：
1. 在 bsp 下打开 env 工具。 1. 在 bsp 下打开 env 工具。
......
bsp/stm32/stm32f103-dofly-lyc8/board/Kconfig
浏览文件 @ 05481094
menu "Hardware Drivers Config" menu "Hardware Drivers Config"
config SOC_STM32F103c8 config SOC_STM32F103C8
bool bool
select SOC_SERIES_STM32F1 select SOC_SERIES_STM32F1
default y default y
...@@ -16,11 +16,21 @@ menu "On-chip Peripheral Drivers" ...@@ -16,11 +16,21 @@ menu "On-chip Peripheral Drivers"
select RT_USING_PIN select RT_USING_PIN
default y default y
menuconfig BSP_USING_UART
bool "Enable UART"
default y
select RT_USING_SERIAL
if BSP_USING_UART
config BSP_USING_UART1 config BSP_USING_UART1
bool "Enable UART1" bool "Enable UART1"
select RT_USING_SERIAL
default y default y
config BSP_UART1_RX_USING_DMA
bool "Enable UART1 RX DMA"
depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
default n
endif
endmenu endmenu
menu "Board extended module Drivers" menu "Board extended module Drivers"
......
bsp/stm32/stm32f103-dofly-lyc8/board/linker_scripts/link.lds
浏览文件 @ 05481094
...@@ -5,7 +5,7 @@ ...@@ -5,7 +5,7 @@
/* Program Entry, set to mark it as "used" and avoid gc */ /* Program Entry, set to mark it as "used" and avoid gc */
MEMORY MEMORY
{ {
ROM (rx) : ORIGIN = 0x08000000, LENGTH = 64k /* 128KB flash */ ROM (rx) : ORIGIN = 0x08000000, LENGTH = 64k /* 64KB flash */
RAM (rw) : ORIGIN = 0x20000000, LENGTH = 20k /* 20K sram */ RAM (rw) : ORIGIN = 0x20000000, LENGTH = 20k /* 20K sram */
} }
ENTRY(Reset_Handler) ENTRY(Reset_Handler)
......
bsp/stm32/stm32f103-dofly-lyc8/project.uvoptx
浏览文件 @ 05481094
...@@ -127,7 +127,7 @@ ...@@ -127,7 +127,7 @@
<tRSysVw>1</tRSysVw> <tRSysVw>1</tRSysVw>
<sRunDeb>0</sRunDeb> <sRunDeb>0</sRunDeb>
<sLrtime>0</sLrtime> <sLrtime>0</sLrtime>
<nTsel>3</nTsel> <nTsel>5</nTsel>
<sDll></sDll> <sDll></sDll>
<sDllPa></sDllPa> <sDllPa></sDllPa>
<sDlgDll></sDlgDll> <sDlgDll></sDlgDll>
...@@ -138,7 +138,7 @@ ...@@ -138,7 +138,7 @@
<tDlgDll></tDlgDll> <tDlgDll></tDlgDll>
<tDlgPa></tDlgPa> <tDlgPa></tDlgPa>
<tIfile></tIfile> <tIfile></tIfile>
<pMon>Segger\JL2CM3.dll</pMon> <pMon>STLink\ST-LINKIII-KEIL_SWO.dll</pMon>
</DebugOpt> </DebugOpt>
<TargetDriverDllRegistry> <TargetDriverDllRegistry>
<SetRegEntry> <SetRegEntry>
...@@ -149,7 +149,7 @@ ...@@ -149,7 +149,7 @@
<SetRegEntry> <SetRegEntry>
<Number>0</Number> <Number>0</Number>
<Key>JL2CM3</Key> <Key>JL2CM3</Key>
<Name>-U4294967295 -O14 -S2 -ZTIFSpeedSel5000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight JTAG-DP") -D00(3BA00477) -L00(4) -N01("ST TMC") -D01(16410041) -L01(5) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_128 -FS08000000 -FL020000 -FP0($$Device:STM32F103C8$Flash\STM32F10x_128.FLM)</Name> <Name>-U30000299 -O78 -S2 -ZTIFSpeedSel5000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(4) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC1000 -FN0</Name>
</SetRegEntry> </SetRegEntry>
<SetRegEntry> <SetRegEntry>
<Number>0</Number> <Number>0</Number>
...@@ -203,7 +203,7 @@ ...@@ -203,7 +203,7 @@
</Target> </Target>
<Group> <Group>
<GroupName>Applications</GroupName> <GroupName>Kernel</GroupName>
<tvExp>1</tvExp> <tvExp>1</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel> <cbSel>0</cbSel>
...@@ -215,207 +215,207 @@ ...@@ -215,207 +215,207 @@
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>applications\main.c</PathWithFileName> <PathWithFileName>..\..\..\src\clock.c</PathWithFileName>
<FilenameWithoutPath>main.c</FilenameWithoutPath> <FilenameWithoutPath>clock.c</FilenameWithoutPath>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
</Group>
<Group>
<GroupName>Drivers</GroupName>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>0</RteFlg>
<File> <File>
<GroupNumber>2</GroupNumber> <GroupNumber>1</GroupNumber>
<FileNumber>2</FileNumber> <FileNumber>2</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>board\board.c</PathWithFileName> <PathWithFileName>..\..\..\src\components.c</PathWithFileName>
<FilenameWithoutPath>board.c</FilenameWithoutPath> <FilenameWithoutPath>components.c</FilenameWithoutPath>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File> <File>
<GroupNumber>2</GroupNumber> <GroupNumber>1</GroupNumber>
<FileNumber>3</FileNumber> <FileNumber>3</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>board\CubeMX_Config\Src\stm32f1xx_hal_msp.c</PathWithFileName> <PathWithFileName>..\..\..\src\cpu.c</PathWithFileName>
<FilenameWithoutPath>stm32f1xx_hal_msp.c</FilenameWithoutPath> <FilenameWithoutPath>cpu.c</FilenameWithoutPath>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File> <File>
<GroupNumber>2</GroupNumber> <GroupNumber>1</GroupNumber>
<FileNumber>4</FileNumber> <FileNumber>4</FileNumber>
<FileType>2</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Source\Templates\arm\startup_stm32f103xb.s</PathWithFileName> <PathWithFileName>..\..\..\src\device.c</PathWithFileName>
<FilenameWithoutPath>startup_stm32f103xb.s</FilenameWithoutPath> <FilenameWithoutPath>device.c</FilenameWithoutPath>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File> <File>
<GroupNumber>2</GroupNumber> <GroupNumber>1</GroupNumber>
<FileNumber>5</FileNumber> <FileNumber>5</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\libraries\HAL_Drivers\drv_gpio.c</PathWithFileName> <PathWithFileName>..\..\..\src\idle.c</PathWithFileName>
<FilenameWithoutPath>drv_gpio.c</FilenameWithoutPath> <FilenameWithoutPath>idle.c</FilenameWithoutPath>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File> <File>
<GroupNumber>2</GroupNumber> <GroupNumber>1</GroupNumber>
<FileNumber>6</FileNumber> <FileNumber>6</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\libraries\HAL_Drivers\drv_usart.c</PathWithFileName> <PathWithFileName>..\..\..\src\ipc.c</PathWithFileName>
<FilenameWithoutPath>drv_usart.c</FilenameWithoutPath> <FilenameWithoutPath>ipc.c</FilenameWithoutPath>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File> <File>
<GroupNumber>2</GroupNumber> <GroupNumber>1</GroupNumber>
<FileNumber>7</FileNumber> <FileNumber>7</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\libraries\HAL_Drivers\drv_common.c</PathWithFileName> <PathWithFileName>..\..\..\src\irq.c</PathWithFileName>
<FilenameWithoutPath>drv_common.c</FilenameWithoutPath> <FilenameWithoutPath>irq.c</FilenameWithoutPath>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
</Group>
<Group>
<GroupName>Kernel</GroupName>
<tvExp>1</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>0</RteFlg>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>1</GroupNumber>
<FileNumber>8</FileNumber> <FileNumber>8</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\clock.c</PathWithFileName> <PathWithFileName>..\..\..\src\kservice.c</PathWithFileName>
<FilenameWithoutPath>clock.c</FilenameWithoutPath> <FilenameWithoutPath>kservice.c</FilenameWithoutPath>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>1</GroupNumber>
<FileNumber>9</FileNumber> <FileNumber>9</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\components.c</PathWithFileName> <PathWithFileName>..\..\..\src\mem.c</PathWithFileName>
<FilenameWithoutPath>components.c</FilenameWithoutPath> <FilenameWithoutPath>mem.c</FilenameWithoutPath>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>1</GroupNumber>
<FileNumber>10</FileNumber> <FileNumber>10</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\cpu.c</PathWithFileName> <PathWithFileName>..\..\..\src\mempool.c</PathWithFileName>
<FilenameWithoutPath>cpu.c</FilenameWithoutPath> <FilenameWithoutPath>mempool.c</FilenameWithoutPath>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>1</GroupNumber>
<FileNumber>11</FileNumber> <FileNumber>11</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\device.c</PathWithFileName> <PathWithFileName>..\..\..\src\object.c</PathWithFileName>
<FilenameWithoutPath>device.c</FilenameWithoutPath> <FilenameWithoutPath>object.c</FilenameWithoutPath>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>1</GroupNumber>
<FileNumber>12</FileNumber> <FileNumber>12</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\idle.c</PathWithFileName> <PathWithFileName>..\..\..\src\scheduler.c</PathWithFileName>
<FilenameWithoutPath>idle.c</FilenameWithoutPath> <FilenameWithoutPath>scheduler.c</FilenameWithoutPath>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>1</GroupNumber>
<FileNumber>13</FileNumber> <FileNumber>13</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\ipc.c</PathWithFileName> <PathWithFileName>..\..\..\src\signal.c</PathWithFileName>
<FilenameWithoutPath>ipc.c</FilenameWithoutPath> <FilenameWithoutPath>signal.c</FilenameWithoutPath>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>1</GroupNumber>
<FileNumber>14</FileNumber> <FileNumber>14</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\irq.c</PathWithFileName> <PathWithFileName>..\..\..\src\thread.c</PathWithFileName>
<FilenameWithoutPath>irq.c</FilenameWithoutPath> <FilenameWithoutPath>thread.c</FilenameWithoutPath>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>1</GroupNumber>
<FileNumber>15</FileNumber> <FileNumber>15</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\kservice.c</PathWithFileName> <PathWithFileName>..\..\..\src\timer.c</PathWithFileName>
<FilenameWithoutPath>kservice.c</FilenameWithoutPath> <FilenameWithoutPath>timer.c</FilenameWithoutPath>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
</Group>
<Group>
<GroupName>Applications</GroupName>
<tvExp>1</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>0</RteFlg>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>2</GroupNumber>
<FileNumber>16</FileNumber> <FileNumber>16</FileNumber>
<FileType>1</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\mem.c</PathWithFileName> <PathWithFileName>applications\main.c</PathWithFileName>
<FilenameWithoutPath>mem.c</FilenameWithoutPath> <FilenameWithoutPath>main.c</FilenameWithoutPath>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
</Group>
<Group>
<GroupName>Drivers</GroupName>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>0</RteFlg>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>3</GroupNumber>
<FileNumber>17</FileNumber> <FileNumber>17</FileNumber>
...@@ -423,8 +423,8 @@ ...@@ -423,8 +423,8 @@
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\mempool.c</PathWithFileName> <PathWithFileName>board\board.c</PathWithFileName>
<FilenameWithoutPath>mempool.c</FilenameWithoutPath> <FilenameWithoutPath>board.c</FilenameWithoutPath>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
...@@ -435,20 +435,20 @@ ...@@ -435,20 +435,20 @@
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\object.c</PathWithFileName> <PathWithFileName>board\CubeMX_Config\Src\stm32f1xx_hal_msp.c</PathWithFileName>
<FilenameWithoutPath>object.c</FilenameWithoutPath> <FilenameWithoutPath>stm32f1xx_hal_msp.c</FilenameWithoutPath>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File> <File>
<GroupNumber>3</GroupNumber> <GroupNumber>3</GroupNumber>
<FileNumber>19</FileNumber> <FileNumber>19</FileNumber>
<FileType>1</FileType> <FileType>2</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\scheduler.c</PathWithFileName> <PathWithFileName>..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Source\Templates\arm\startup_stm32f103xb.s</PathWithFileName>
<FilenameWithoutPath>scheduler.c</FilenameWithoutPath> <FilenameWithoutPath>startup_stm32f103xb.s</FilenameWithoutPath>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
...@@ -459,8 +459,8 @@ ...@@ -459,8 +459,8 @@
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\signal.c</PathWithFileName> <PathWithFileName>..\libraries\HAL_Drivers\drv_gpio.c</PathWithFileName>
<FilenameWithoutPath>signal.c</FilenameWithoutPath> <FilenameWithoutPath>drv_gpio.c</FilenameWithoutPath>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
...@@ -471,8 +471,8 @@ ...@@ -471,8 +471,8 @@
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\thread.c</PathWithFileName> <PathWithFileName>..\libraries\HAL_Drivers\drv_usart.c</PathWithFileName>
<FilenameWithoutPath>thread.c</FilenameWithoutPath> <FilenameWithoutPath>drv_usart.c</FilenameWithoutPath>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
...@@ -483,16 +483,16 @@ ...@@ -483,16 +483,16 @@
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\timer.c</PathWithFileName> <PathWithFileName>..\libraries\HAL_Drivers\drv_common.c</PathWithFileName>
<FilenameWithoutPath>timer.c</FilenameWithoutPath> <FilenameWithoutPath>drv_common.c</FilenameWithoutPath>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
</Group> </Group>
<Group> <Group>
<GroupName>CORTEX-M3</GroupName> <GroupName>cpu</GroupName>
<tvExp>1</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel> <cbSel>0</cbSel>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
...@@ -503,20 +503,20 @@ ...@@ -503,20 +503,20 @@
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\..\..\libcpu\arm\cortex-m3\cpuport.c</PathWithFileName> <PathWithFileName>..\..\..\libcpu\arm\common\backtrace.c</PathWithFileName>
<FilenameWithoutPath>cpuport.c</FilenameWithoutPath> <FilenameWithoutPath>backtrace.c</FilenameWithoutPath>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File> <File>
<GroupNumber>4</GroupNumber> <GroupNumber>4</GroupNumber>
<FileNumber>24</FileNumber> <FileNumber>24</FileNumber>
<FileType>2</FileType> <FileType>1</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\..\..\libcpu\arm\cortex-m3\context_rvds.S</PathWithFileName> <PathWithFileName>..\..\..\libcpu\arm\common\div0.c</PathWithFileName>
<FilenameWithoutPath>context_rvds.S</FilenameWithoutPath> <FilenameWithoutPath>div0.c</FilenameWithoutPath>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
...@@ -527,8 +527,8 @@ ...@@ -527,8 +527,8 @@
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\..\..\libcpu\arm\common\backtrace.c</PathWithFileName> <PathWithFileName>..\..\..\libcpu\arm\common\showmem.c</PathWithFileName>
<FilenameWithoutPath>backtrace.c</FilenameWithoutPath> <FilenameWithoutPath>showmem.c</FilenameWithoutPath>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
...@@ -539,20 +539,20 @@ ...@@ -539,20 +539,20 @@
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\..\..\libcpu\arm\common\div0.c</PathWithFileName> <PathWithFileName>..\..\..\libcpu\arm\cortex-m3\cpuport.c</PathWithFileName>
<FilenameWithoutPath>div0.c</FilenameWithoutPath> <FilenameWithoutPath>cpuport.c</FilenameWithoutPath>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
<File> <File>
<GroupNumber>4</GroupNumber> <GroupNumber>4</GroupNumber>
<FileNumber>27</FileNumber> <FileNumber>27</FileNumber>
<FileType>1</FileType> <FileType>2</FileType>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\..\..\libcpu\arm\common\showmem.c</PathWithFileName> <PathWithFileName>..\..\..\libcpu\arm\cortex-m3\context_rvds.S</PathWithFileName>
<FilenameWithoutPath>showmem.c</FilenameWithoutPath> <FilenameWithoutPath>context_rvds.S</FilenameWithoutPath>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>
...@@ -560,7 +560,7 @@ ...@@ -560,7 +560,7 @@
<Group> <Group>
<GroupName>DeviceDrivers</GroupName> <GroupName>DeviceDrivers</GroupName>
<tvExp>1</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel> <cbSel>0</cbSel>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
......
bsp/stm32/stm32f103-dofly-lyc8/project.uvprojx
浏览文件 @ 05481094
...@@ -53,7 +53,7 @@ ...@@ -53,7 +53,7 @@
<CreateLib>0</CreateLib> <CreateLib>0</CreateLib>
<CreateHexFile>0</CreateHexFile> <CreateHexFile>0</CreateHexFile>
<DebugInformation>1</DebugInformation> <DebugInformation>1</DebugInformation>
<BrowseInformation>1</BrowseInformation> <BrowseInformation>0</BrowseInformation>
<ListingPath>.\build\keil\List\</ListingPath> <ListingPath>.\build\keil\List\</ListingPath>
<HexFormatSelection>1</HexFormatSelection> <HexFormatSelection>1</HexFormatSelection>
<Merge32K>0</Merge32K> <Merge32K>0</Merge32K>
...@@ -334,7 +334,7 @@ ...@@ -334,7 +334,7 @@
<MiscControls></MiscControls> <MiscControls></MiscControls>
<Define>STM32F103xB, USE_HAL_DRIVER</Define> <Define>STM32F103xB, USE_HAL_DRIVER</Define>
<Undefine></Undefine> <Undefine></Undefine>
<IncludePath>applications;.;board;board\CubeMX_Config\Inc;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\include;..\..\..\libcpu\arm\cortex-m3;..\..\..\libcpu\arm\common;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\finsh;..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Include;..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Inc;..\libraries\STM32F1xx_HAL\CMSIS\Include</IncludePath> <IncludePath>.;..\..\..\include;applications;.;board;board\CubeMX_Config\Inc;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m3;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\finsh;..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Include;..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Inc;..\libraries\STM32F1xx_HAL\CMSIS\Include</IncludePath>
</VariousControls> </VariousControls>
</Cads> </Cads>
<Aads> <Aads>
...@@ -367,58 +367,13 @@ ...@@ -367,58 +367,13 @@
<ScatterFile>.\board\linker_scripts\link.sct</ScatterFile> <ScatterFile>.\board\linker_scripts\link.sct</ScatterFile>
<IncludeLibs></IncludeLibs> <IncludeLibs></IncludeLibs>
<IncludeLibsPath></IncludeLibsPath> <IncludeLibsPath></IncludeLibsPath>
<Misc>--keep *.o(.rti_fn.*) --keep *.o(FSymTab)</Misc> <Misc> --keep *.o(.rti_fn.*) --keep *.o(FSymTab)</Misc>
<LinkerInputFile></LinkerInputFile> <LinkerInputFile></LinkerInputFile>
<DisabledWarnings></DisabledWarnings> <DisabledWarnings></DisabledWarnings>
</LDads> </LDads>
</TargetArmAds> </TargetArmAds>
</TargetOption> </TargetOption>
<Groups> <Groups>
<Group>
<GroupName>Applications</GroupName>
<Files>
<File>
<FileName>main.c</FileName>
<FileType>1</FileType>
<FilePath>applications\main.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>Drivers</GroupName>
<Files>
<File>
<FileName>board.c</FileName>
<FileType>1</FileType>
<FilePath>board\board.c</FilePath>
</File>
<File>
<FileName>stm32f1xx_hal_msp.c</FileName>
<FileType>1</FileType>
<FilePath>board\CubeMX_Config\Src\stm32f1xx_hal_msp.c</FilePath>
</File>
<File>
<FileName>startup_stm32f103xb.s</FileName>
<FileType>2</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Source\Templates\arm\startup_stm32f103xb.s</FilePath>
</File>
<File>
<FileName>drv_gpio.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\HAL_Drivers\drv_gpio.c</FilePath>
</File>
<File>
<FileName>drv_usart.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\HAL_Drivers\drv_usart.c</FilePath>
</File>
<File>
<FileName>drv_common.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\HAL_Drivers\drv_common.c</FilePath>
</File>
</Files>
</Group>
<Group> <Group>
<GroupName>Kernel</GroupName> <GroupName>Kernel</GroupName>
<Files> <Files>
...@@ -500,18 +455,53 @@ ...@@ -500,18 +455,53 @@
</Files> </Files>
</Group> </Group>
<Group> <Group>
<GroupName>CORTEX-M3</GroupName> <GroupName>Applications</GroupName>
<Files> <Files>
<File> <File>
<FileName>cpuport.c</FileName> <FileName>main.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\libcpu\arm\cortex-m3\cpuport.c</FilePath> <FilePath>applications\main.c</FilePath>
</File> </File>
</Files>
</Group>
<Group>
<GroupName>Drivers</GroupName>
<Files>
<File> <File>
<FileName>context_rvds.S</FileName> <FileName>board.c</FileName>
<FileType>1</FileType>
<FilePath>board\board.c</FilePath>
</File>
<File>
<FileName>stm32f1xx_hal_msp.c</FileName>
<FileType>1</FileType>
<FilePath>board\CubeMX_Config\Src\stm32f1xx_hal_msp.c</FilePath>
</File>
<File>
<FileName>startup_stm32f103xb.s</FileName>
<FileType>2</FileType> <FileType>2</FileType>
<FilePath>..\..\..\libcpu\arm\cortex-m3\context_rvds.S</FilePath> <FilePath>..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Source\Templates\arm\startup_stm32f103xb.s</FilePath>
</File>
<File>
<FileName>drv_gpio.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\HAL_Drivers\drv_gpio.c</FilePath>
</File> </File>
<File>
<FileName>drv_usart.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\HAL_Drivers\drv_usart.c</FilePath>
</File>
<File>
<FileName>drv_common.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\HAL_Drivers\drv_common.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>cpu</GroupName>
<Files>
<File> <File>
<FileName>backtrace.c</FileName> <FileName>backtrace.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
...@@ -527,6 +517,16 @@ ...@@ -527,6 +517,16 @@
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\libcpu\arm\common\showmem.c</FilePath> <FilePath>..\..\..\libcpu\arm\common\showmem.c</FilePath>
</File> </File>
<File>
<FileName>cpuport.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\libcpu\arm\cortex-m3\cpuport.c</FilePath>
</File>
<File>
<FileName>context_rvds.S</FileName>
<FileType>2</FileType>
<FilePath>..\..\..\libcpu\arm\cortex-m3\context_rvds.S</FilePath>
</File>
</Files> </Files>
</Group> </Group>
<Group> <Group>
......
bsp/stm32/stm32f103-dofly-lyc8/rtconfig.h
浏览文件 @ 05481094
...@@ -161,12 +161,14 @@ ...@@ -161,12 +161,14 @@
/* Hardware Drivers Config */ /* Hardware Drivers Config */
#define SOC_STM32F103c8 #define SOC_STM32F103C8
/* Onboard Peripheral Drivers */ /* Onboard Peripheral Drivers */
/* On-chip Peripheral Drivers */ /* On-chip Peripheral Drivers */
#define BSP_USING_GPIO
#define BSP_USING_UART
#define BSP_USING_UART1 #define BSP_USING_UART1
/* Board extended module Drivers */ /* Board extended module Drivers */
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或