#   Copyright (c) 2020 PaddlePaddle Authors. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# Define functions about array.

import paddle
from ..static import Variable
from ..framework import LayerHelper, core, _non_static_mode
from ..fluid.data_feeder import check_type
from ..fluid.data_feeder import check_variable_and_dtype

__all__ = []


def array_length(array):
    """
    This OP is used to get the length of the input array.

    Args:
        array (list|Tensor): The input array that will be used to compute the length. In dynamic mode, ``array`` is a Python list. But in static mode, array is a Tensor whose VarType is LOD_TENSOR_ARRAY.

    Returns:
        Tensor: 1-D Tensor with shape [1], which is the length of array.

    Examples:
        .. code-block:: python

            import paddle

            arr = paddle.tensor.create_array(dtype='float32')
            x = paddle.full(shape=[3, 3], fill_value=5, dtype="float32")
            i = paddle.zeros(shape=[1], dtype="int32")

            arr = paddle.tensor.array_write(x, i, array=arr)

            arr_len = paddle.tensor.array_length(arr)
            print(arr_len)  # 1
    """
    if _non_static_mode():
        assert isinstance(
            array,
            list), "The 'array' in array_write must be a list in dygraph mode"
        return len(array)

    if not isinstance(
            array,
            Variable) or array.type != core.VarDesc.VarType.LOD_TENSOR_ARRAY:
        raise TypeError(
            "array should be tensor array vairable in array_length Op")

    helper = LayerHelper('array_length', **locals())
    tmp = helper.create_variable_for_type_inference(dtype='int64')
    tmp.stop_gradient = True
    helper.append_op(
        type='lod_array_length', inputs={'X': [array]}, outputs={'Out': [tmp]})
    return tmp


def array_read(array, i):
    """
    This OP is used to read data at the specified position from the input array.

    Case:

    .. code-block:: text

        Input:
            The shape of first three tensors are [1], and that of the last one is [1,2]:
                array = ([0.6], [0.1], [0.3], [0.4, 0.2])
            And:
                i = [3]

        Output:
            output = [0.4, 0.2]

    Args:
        array (list|Tensor): The input array. In dynamic mode, ``array`` is a Python list. But in static mode, array is a Tensor whose ``VarType`` is ``LOD_TENSOR_ARRAY``.
        i (Tensor): 1-D Tensor, whose shape is [1] and dtype is int64. It represents the
            specified read position of ``array``.

    Returns:
        Tensor: A Tensor that is read at the specified position of ``array``.

    Examples:
        .. code-block:: python

            import paddle

            arr = paddle.tensor.create_array(dtype="float32")
            x = paddle.full(shape=[1, 3], fill_value=5, dtype="float32")
            i = paddle.zeros(shape=[1], dtype="int32")

            arr = paddle.tensor.array_write(x, i, array=arr)

            item = paddle.tensor.array_read(arr, i)
            print(item)     # [[5., 5., 5.]]
    """
    if _non_static_mode():
        assert isinstance(
            array,
            list), "The 'array' in array_read must be list in dygraph mode"
        assert isinstance(
            i, Variable
        ), "The index 'i' in array_read must be Variable in dygraph mode"
        assert i.shape == [
            1
        ], "The shape of index 'i' should be [1] in dygraph mode"
        i = i.numpy().item(0)
        return array[i]

    check_variable_and_dtype(i, 'i', ['int64'], 'array_read')
    helper = LayerHelper('array_read', **locals())
    if not isinstance(
            array,
            Variable) or array.type != core.VarDesc.VarType.LOD_TENSOR_ARRAY:
        raise TypeError("array should be tensor array vairable")
    out = helper.create_variable_for_type_inference(dtype=array.dtype)
    helper.append_op(
        type='read_from_array',
        inputs={'X': [array],
                'I': [i]},
        outputs={'Out': [out]})
    return out


def array_write(x, i, array=None):
    """
    This OP writes the input ``x`` into the i-th position of the ``array`` returns the modified array.
    If ``array`` is none, a new array will be created and returned.

    Args:
        x (Tensor): The input data to be written into array. It's multi-dimensional
            Tensor or LoDTensor. Data type: float32, float64, int32, int64 and bool.
        i (Tensor): 1-D Tensor with shape [1], which represents the position into which
            ``x`` is written.
        array (list|Tensor, optional): The array into which ``x`` is written. The default value is None,
            when a new array will be created and returned as a result. In dynamic mode, ``array`` is a Python list.
            But in static mode, array is a Tensor whose ``VarType`` is ``LOD_TENSOR_ARRAY``.

    Returns:
        list|Tensor: The input ``array`` after ``x`` is written into.

    Examples:
        .. code-block:: python

            import paddle

            arr = paddle.tensor.create_array(dtype="float32")
            x = paddle.full(shape=[1, 3], fill_value=5, dtype="float32")
            i = paddle.zeros(shape=[1], dtype="int32")

            arr = paddle.tensor.array_write(x, i, array=arr)

            item = paddle.tensor.array_read(arr, i)
            print(item)     # [[5., 5., 5.]]
    """
    if _non_static_mode():
        assert isinstance(
            x, Variable
        ), "The input data 'x' in array_write must be Variable in dygraph mode"
        assert isinstance(
            i, Variable
        ), "The index 'i' in array_write must be Variable in dygraph mode"
        assert i.shape == [
            1
        ], "The shape of index 'i' should be [1] in dygraph mode"
        i = i.numpy().item(0)
        if array is None:
            array = create_array(x.dtype)
        assert isinstance(
            array,
            list), "The 'array' in array_write must be a list in dygraph mode"
        assert i <= len(
            array
        ), "The index 'i' should not be greater than the length of 'array' in dygraph mode"
        if i < len(array):
            array[i] = x
        else:
            array.append(x)
        return array

    check_variable_and_dtype(i, 'i', ['int64'], 'array_write')
    check_type(x, 'x', (Variable), 'array_write')
    helper = LayerHelper('array_write', **locals())
    if array is not None:
        if not isinstance(
                array,
                Variable) or array.type != core.VarDesc.VarType.LOD_TENSOR_ARRAY:
            raise TypeError(
                "array should be tensor array vairable in array_write Op")
    if array is None:
        array = helper.create_variable(
            name="{0}.out".format(helper.name),
            type=core.VarDesc.VarType.LOD_TENSOR_ARRAY,
            dtype=x.dtype)
    helper.append_op(
        type='write_to_array',
        inputs={'X': [x],
                'I': [i]},
        outputs={'Out': [array]})
    return array


def create_array(dtype, initialized_list=None):
    """
    This OP creates an array. It is used as the input of :ref:`api_paddle_tensor_array_array_read` and
    :ref:`api_paddle_tensor_array_array_write`.

    Args:
        dtype (str): The data type of the elements in the array. Support data type: float32, float64, int32, int64 and bool.
        initialized_list(list): Used to initialize as default value for created array.
                    All values in initialized list should be a Tensor.

    Returns:
        list|Tensor: An empty array. In dynamic mode, ``array`` is a Python list. But in static mode, array is a Tensor
        whose ``VarType`` is ``LOD_TENSOR_ARRAY``.

    Examples:
        .. code-block:: python

            import paddle

            arr = paddle.tensor.create_array(dtype="float32")
            x = paddle.full(shape=[1, 3], fill_value=5, dtype="float32")
            i = paddle.zeros(shape=[1], dtype="int32")

            arr = paddle.tensor.array_write(x, i, array=arr)

            item = paddle.tensor.array_read(arr, i)
            print(item)     # [[5., 5., 5.]]

    """
    array = []
    if initialized_list is not None:
        if not isinstance(initialized_list, (list, tuple)):
            raise TypeError(
                "Require type(initialized_list) should be list/tuple, but received {}".
                format(type(initialized_list)))
        array = list(initialized_list)

    # NOTE: Only support plain list like [x, y,...], not support nested list in static mode.
    for val in array:
        if not isinstance(val, Variable):
            raise TypeError(
                "All values in `initialized_list` should be Variable, but recevied {}.".
                format(type(val)))

    if _non_static_mode():
        return array

    helper = LayerHelper("array", **locals())
    tensor_array = helper.create_variable(
        name="{0}.out".format(helper.name),
        type=core.VarDesc.VarType.LOD_TENSOR_ARRAY,
        dtype=dtype)

    for val in array:
        array_write(x=val, i=array_length(tensor_array), array=tensor_array)

    return tensor_array