diff --git a/doc/fluid/design/concurrent/channel.md b/doc/fluid/design/concurrent/channel.md
new file mode 100644
index 0000000000000000000000000000000000000000..a00a3325e7b49381f0f82ebbf32b74683f02de5f
--- /dev/null
+++ b/doc/fluid/design/concurrent/channel.md
@@ -0,0 +1,139 @@
+# Channel Design
+
+## Introduction
+
+A Channel is a data structure that allows for synchronous interprocess 
+communication via message passing.  It is a fundemental component of CSP
+(communicating sequential processes), and allows for users to pass data
+between threads without having to worry about synchronization.
+
+## How to use it
+
+Paddle offers python APIs to open and close channels, along with sending
+and receiving data to/from a channel.
+
+### Create a channel
+
+Creates a new channel that takes in variables of a specific dtype.
+
+- **fluid.make_channel(dtype, capacity=0)**
+  - **dtype**: The data type of variables being sent/received through channel
+  - **capacity**: The capacity of the channel.  A capacity of 0 represents 
+    an unbuffered channel.  Capacity > 0 represents a buffered channel
+
+```
+ch = fluid.make_channel(dtype=core.VarDesc.VarType.LOD_TENSOR, 10)
+```
+
+### Close a channel
+
+Closes a channel.  Any pending senders and receivers will be awoken during
+this time.  Receivers can still receive from a closed channel, but senders
+are not allowed to send any additional data to the channel (Paddle will
+raise an exception if users try to send to a closed channel.)
+
+- **fluid.channel_close(channel)**
+
+```
+fluid.channel_close(ch)
+```
+
+### Send data to a channel
+
+Sends a variable to a channel.  Currently, variables of dtype `LoDTensor`, 
+`LoDRankTable`, `LoDTensorArray`, `SelectedRows`, `ReaderHolder`, and 
+`ChannelHolder` are supported.
+
+By default, the data of the Variable is moved from the sender to the receiver,
+however the user can optionally copy the data before performing the send.
+
+- **channel_send(channel, variable, is_copy=False)**
+  - **channel**: The channel to send the variable to
+  - **variable**: The variable to send to the channel
+  - **is_copy**: If set to True, channel_send will perform a variable assign
+  to copy the source variable to a new variable to be sent.
+  
+```
+ch = fluid.make_channel(dtype=core.VarDesc.VarType.LOD_TENSOR)
+var = fill_constant(shape=[1],dtype=core.VarDesc.VarType.INT32, value=100)
+fluid.channel_send(ch, var, True)
+```
+
+### Receive data from a channel
+
+Receives a variable from a channel.  The data of the variable is moved to the
+receiving variable.
+
+- **channel_recv(channel, return_variable)**
+  - **channel**: The channel to receive the variable from
+  - **return_variable**: The destination variable used to store the data of the
+  variable received from the channel
+  
+```
+ch = fluid.make_channel(dtype=core.VarDesc.VarType.LOD_TENSOR)
+var = fill_constant(shape=[1],dtype=core.VarDesc.VarType.INT32, value=-1)
+fluid.channel_recv(ch, var)
+```
+
+## How it Works
+
+Channels provides a simple interface for different threads to share data.
+To support the synchronization requirements, channels utilizes a series of
+internal queues, locks, and conditional variables.
+
+### QueueMessage
+
+QueueMessage encapsulates the state of the channel send/receive operation to be
+put in the **sendq/recvq**.  It contains a condition variable used to lock the 
+thread (when there are no available sends/receives).  In addition, it contains
+a callback function to notify a thread when the QueueMessage is being 
+processed by the channel.
+
+### Queues
+
+- **buff_**: This queue holds the data buffer in a buffered channel.  The
+capacity is set to the capacity of the channel.  This data buffer is not
+used in an unbuffered channel.
+
+- **sendq**: This queue holds the QueueMessage of any pending senders of a
+channel.  When a thread performs a channel_send operation on the channel, the
+channel_send operation will put a new QueueMessage on the sendq and block the
+current thread under two conditions:
+  1. The channel is buffered and is full
+  2. The channel is unbuffered and does not have a receiver
+
+- **recvq**:  This queue holds the QueueMessage of any pending receivers of a
+channel.  When a thread performs a channel_recv operation on the channel, the
+channel_recv operation will put a new QueueMessage on the recvq and block the
+current thread under two conditions:
+  1. The channel is buffered and there is no data on the buff_
+  2. The channel is unbuffered and does not have a sender
+  
+### State diagram
+
+#### Channel Send
+
+<p align="center">
+<img src="./images/channel_send.png"/><br/>
+</p>
+  
+#### Channel Receive
+
+<p align="center">
+<img src="./images/channel_recv.png"/><br/>
+</p>
+  
+## Limitations and Considerations
+
+### Variable Copy
+
+In golang, variables in channels are copied from the sender to the receiver.
+In Paddle, the data from our variables are **moved** from sender to receiver.
+As a result, these variables should not be used after they are sent.  We
+provide a flag in channel_send method to allow users to copy the variable to
+be sent before it is sent.  
+
+Please note that this is acheived by adding an **assign** operator and creating
+a temporary variable that is sent in place of the original variable.  Please
+note that **assign** operator has limited support for only certain variables 
+datatypes.
diff --git a/doc/fluid/design/concurrent/images/channel_recv.png b/doc/fluid/design/concurrent/images/channel_recv.png
new file mode 100644
index 0000000000000000000000000000000000000000..c06cd15ae7b8a8c94d5742f6675e389081fcf789
Binary files /dev/null and b/doc/fluid/design/concurrent/images/channel_recv.png differ
diff --git a/doc/fluid/design/concurrent/images/channel_send.png b/doc/fluid/design/concurrent/images/channel_send.png
new file mode 100644
index 0000000000000000000000000000000000000000..006ebb4a5a4bcd32c97847e9fb7729a740255f7c
Binary files /dev/null and b/doc/fluid/design/concurrent/images/channel_send.png differ
diff --git a/paddle/fluid/framework/CMakeLists.txt b/paddle/fluid/framework/CMakeLists.txt
index a4ea74a6d2fbc29dc33a6b57ee453f49ed36c7fa..8c8def6bf47f00a59519f5c6aebcfd0900ca38cf 100644
--- a/paddle/fluid/framework/CMakeLists.txt
+++ b/paddle/fluid/framework/CMakeLists.txt
@@ -100,7 +100,7 @@ cc_test(init_test SRCS init_test.cc DEPS init)
 cc_test(op_kernel_type_test SRCS op_kernel_type_test.cc DEPS place device_context framework_proto)
 cc_test(cow_ptr_tests SRCS details/cow_ptr_test.cc)
       
-cc_test(channel_test SRCS channel_test.cc)
+# cc_test(channel_test SRCS channel_test.cc)
 cc_test(tuple_test SRCS tuple_test.cc )
 cc_test(concurrency_test SRCS concurrency_test.cc DEPS go_op channel_close_op channel_create_op
         channel_send_op channel_recv_op sum_op select_op elementwise_add_op compare_op
diff --git a/python/paddle/fluid/layer_helper.py b/python/paddle/fluid/layer_helper.py
index d771837fc545167f7c32fcf914dd1c3c3ae64fb3..4341e06596892fc0969a4be79edb95cb0b0850fc 100644
--- a/python/paddle/fluid/layer_helper.py
+++ b/python/paddle/fluid/layer_helper.py
@@ -398,7 +398,6 @@ class LayerHelper(object):
             return input_var
         if isinstance(act, basestring):
             act = {'type': act}
-        tmp = self.create_tmp_variable(dtype=input_var.dtype)
 
         if 'use_mkldnn' in self.kwargs:
             act['use_mkldnn'] = self.kwargs.get('use_mkldnn')
@@ -408,9 +407,9 @@ class LayerHelper(object):
         self.append_op(
             type=act_type,
             inputs={"X": [input_var]},
-            outputs={"Out": [tmp]},
+            outputs={"Out": [input_var]},
             attrs=act)
-        return tmp
+        return input_var
 
     def _get_default_initializer(self, dtype):
         if dtype is None or dtype_is_floating(dtype) is True: