Merge pull request #5054 from yanmowudi/master

修复RTC问题，增加GCC工具链

bsp/swm320/.config

@@ -21,6 +21,13 @@ CONFIG_RT_USING_IDLE_HOOK=y
 CONFIG_RT_IDLE_HOOK_LIST_SIZE=4
 CONFIG_IDLE_THREAD_STACK_SIZE=256
 # CONFIG_RT_USING_TIMER_SOFT is not set
+
+#
+# kservice optimization
+#
+# CONFIG_RT_KSERVICE_USING_STDLIB is not set
+# CONFIG_RT_KSERVICE_USING_TINY_SIZE is not set
+# CONFIG_RT_USING_ASM_MEMCPY is not set
 CONFIG_RT_DEBUG=y
 CONFIG_RT_DEBUG_COLOR=y
 # CONFIG_RT_DEBUG_INIT_CONFIG is not set
@@ -54,6 +61,7 @@ CONFIG_RT_USING_MEMHEAP=y
 # CONFIG_RT_USING_SLAB is not set
 CONFIG_RT_USING_MEMHEAP_AS_HEAP=y
 # CONFIG_RT_USING_USERHEAP is not set
+# CONFIG_RT_USING_MEMTRACE is not set
 CONFIG_RT_USING_HEAP=y
 
 #
@@ -64,8 +72,9 @@ CONFIG_RT_USING_DEVICE=y
 # CONFIG_RT_USING_INTERRUPT_INFO is not set
 CONFIG_RT_USING_CONSOLE=y
 CONFIG_RT_CONSOLEBUF_SIZE=128
-CONFIG_RT_CONSOLE_DEVICE_NAME="uart0"
-CONFIG_RT_VER_NUM=0x40003
+CONFIG_RT_CONSOLE_DEVICE_NAME="uart1"
+# CONFIG_RT_PRINTF_LONGLONG is not set
+CONFIG_RT_VER_NUM=0x40004
 CONFIG_ARCH_ARM=y
 CONFIG_RT_USING_CPU_FFS=y
 CONFIG_ARCH_ARM_CORTEX_M=y
@@ -89,19 +98,19 @@ CONFIG_RT_MAIN_THREAD_PRIORITY=10
 # Command shell
 #
 CONFIG_RT_USING_FINSH=y
+CONFIG_RT_USING_MSH=y
+CONFIG_FINSH_USING_MSH=y
 CONFIG_FINSH_THREAD_NAME="tshell"
+CONFIG_FINSH_THREAD_PRIORITY=20
+CONFIG_FINSH_THREAD_STACK_SIZE=4096
 CONFIG_FINSH_USING_HISTORY=y
 CONFIG_FINSH_HISTORY_LINES=5
 CONFIG_FINSH_USING_SYMTAB=y
+CONFIG_FINSH_CMD_SIZE=80
+CONFIG_MSH_USING_BUILT_IN_COMMANDS=y
 CONFIG_FINSH_USING_DESCRIPTION=y
 # CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set
-CONFIG_FINSH_THREAD_PRIORITY=20
-CONFIG_FINSH_THREAD_STACK_SIZE=4096
-CONFIG_FINSH_CMD_SIZE=80
 # CONFIG_FINSH_USING_AUTH is not set
-CONFIG_FINSH_USING_MSH=y
-CONFIG_FINSH_USING_MSH_DEFAULT=y
-# CONFIG_FINSH_USING_MSH_ONLY is not set
 CONFIG_FINSH_ARG_MAX=10
 
 #
@@ -116,6 +125,8 @@ CONFIG_RT_USING_DEVICE_IPC=y
 CONFIG_RT_PIPE_BUFSZ=512
 # CONFIG_RT_USING_SYSTEM_WORKQUEUE is not set
 CONFIG_RT_USING_SERIAL=y
+CONFIG_RT_USING_SERIAL_V1=y
+# CONFIG_RT_USING_SERIAL_V2 is not set
 # CONFIG_RT_SERIAL_USING_DMA is not set
 CONFIG_RT_SERIAL_RB_BUFSZ=64
 # CONFIG_RT_USING_CAN is not set
@@ -154,6 +165,7 @@ CONFIG_RT_USING_PIN=y
 CONFIG_RT_USING_LIBC=y
 # CONFIG_RT_USING_PTHREADS is not set
 # CONFIG_RT_USING_MODULE is not set
+CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 
 #
 # Network
@@ -190,8 +202,14 @@ CONFIG_RT_USING_LIBC=y
 # CONFIG_RT_USING_RYM is not set
 # CONFIG_RT_USING_ULOG is not set
 # CONFIG_RT_USING_UTEST is not set
+# CONFIG_RT_USING_RT_LINK is not set
 # CONFIG_RT_USING_LWP is not set
 
+#
+# RT-Thread Utestcases
+#
+# CONFIG_RT_USING_UTESTCASES is not set
+
 #
 # RT-Thread online packages
 #
@@ -239,6 +257,7 @@ CONFIG_RT_USING_LIBC=y
 # CONFIG_PKG_USING_AT_DEVICE is not set
 # CONFIG_PKG_USING_ATSRV_SOCKET is not set
 # CONFIG_PKG_USING_WIZNET is not set
+# CONFIG_PKG_USING_ZB_COORDINATOR is not set
 
 #
 # IoT Cloud
@@ -259,8 +278,6 @@ CONFIG_RT_USING_LIBC=y
 # CONFIG_PKG_USING_LIBRWS is not set
 # CONFIG_PKG_USING_TCPSERVER is not set
 # CONFIG_PKG_USING_PROTOBUF_C is not set
-# CONFIG_PKG_USING_ONNX_PARSER is not set
-# CONFIG_PKG_USING_ONNX_BACKEND is not set
 # CONFIG_PKG_USING_DLT645 is not set
 # CONFIG_PKG_USING_QXWZ is not set
 # CONFIG_PKG_USING_SMTP_CLIENT is not set
@@ -275,6 +292,13 @@ CONFIG_RT_USING_LIBC=y
 # CONFIG_PKG_USING_BTSTACK is not set
 # CONFIG_PKG_USING_LORAWAN_ED_STACK is not set
 # CONFIG_PKG_USING_WAYZ_IOTKIT is not set
+# CONFIG_PKG_USING_MAVLINK is not set
+# CONFIG_PKG_USING_RAPIDJSON is not set
+# CONFIG_PKG_USING_BSAL is not set
+# CONFIG_PKG_USING_AGILE_MODBUS is not set
+# CONFIG_PKG_USING_AGILE_FTP is not set
+# CONFIG_PKG_USING_EMBEDDEDPROTO is not set
+# CONFIG_PKG_USING_RT_LINK_HW is not set
 
 #
 # security packages
@@ -291,6 +315,7 @@ CONFIG_RT_USING_LIBC=y
 # CONFIG_PKG_USING_LUA is not set
 # CONFIG_PKG_USING_JERRYSCRIPT is not set
 # CONFIG_PKG_USING_MICROPYTHON is not set
+# CONFIG_PKG_USING_PIKASCRIPT is not set
 
 #
 # multimedia packages
@@ -300,9 +325,13 @@ CONFIG_RT_USING_LIBC=y
 # CONFIG_PKG_USING_STEMWIN is not set
 # CONFIG_PKG_USING_WAVPLAYER is not set
 # CONFIG_PKG_USING_TJPGD is not set
+# CONFIG_PKG_USING_PDFGEN is not set
 # CONFIG_PKG_USING_HELIX is not set
 # CONFIG_PKG_USING_AZUREGUIX is not set
 # CONFIG_PKG_USING_TOUCHGFX2RTT is not set
+# CONFIG_PKG_USING_NUEMWIN is not set
+# CONFIG_PKG_USING_MP3PLAYER is not set
+# CONFIG_PKG_USING_TINYJPEG is not set
 
 #
 # tools packages
@@ -311,6 +340,7 @@ CONFIG_RT_USING_LIBC=y
 # CONFIG_PKG_USING_EASYFLASH is not set
 # CONFIG_PKG_USING_EASYLOGGER is not set
 # CONFIG_PKG_USING_SYSTEMVIEW is not set
+# CONFIG_PKG_USING_SEGGER_RTT is not set
 # CONFIG_PKG_USING_RDB is not set
 # CONFIG_PKG_USING_QRCODE is not set
 # CONFIG_PKG_USING_ULOG_EASYFLASH is not set
@@ -339,15 +369,37 @@ CONFIG_RT_USING_LIBC=y
 # CONFIG_PKG_USING_ANV_MEMLEAK is not set
 # CONFIG_PKG_USING_ANV_TESTSUIT is not set
 # CONFIG_PKG_USING_ANV_BENCH is not set
+# CONFIG_PKG_USING_DEVMEM is not set
+# CONFIG_PKG_USING_REGEX is not set
+# CONFIG_PKG_USING_MEM_SANDBOX is not set
+# CONFIG_PKG_USING_SOLAR_TERMS is not set
+# CONFIG_PKG_USING_GAN_ZHI is not set
 
 #
 # system packages
 #
+
+#
+# acceleration: Assembly language or algorithmic acceleration packages
+#
+# CONFIG_PKG_USING_RT_MEMCPY_CM is not set
+# CONFIG_PKG_USING_QFPLIB_M0_FULL is not set
+# CONFIG_PKG_USING_QFPLIB_M0_TINY is not set
+# CONFIG_PKG_USING_QFPLIB_M3 is not set
+
+#
+# Micrium: Micrium software products porting for RT-Thread
+#
+# CONFIG_PKG_USING_UCOSIII_WRAPPER is not set
+# CONFIG_PKG_USING_UCOSII_WRAPPER is not set
+# CONFIG_PKG_USING_UC_CRC is not set
+# CONFIG_PKG_USING_UC_CLK is not set
+# CONFIG_PKG_USING_UC_COMMON is not set
+# CONFIG_PKG_USING_UC_MODBUS is not set
 # CONFIG_PKG_USING_GUIENGINE is not set
 # CONFIG_PKG_USING_PERSIMMON is not set
 # CONFIG_PKG_USING_CAIRO is not set
 # CONFIG_PKG_USING_PIXMAN is not set
-# CONFIG_PKG_USING_LWEXT4 is not set
 # CONFIG_PKG_USING_PARTITION is not set
 # CONFIG_PKG_USING_FAL is not set
 # CONFIG_PKG_USING_FLASHDB is not set
@@ -357,6 +409,9 @@ CONFIG_RT_USING_LIBC=y
 # CONFIG_PKG_USING_CMSIS is not set
 # CONFIG_PKG_USING_DFS_YAFFS is not set
 # CONFIG_PKG_USING_LITTLEFS is not set
+# CONFIG_PKG_USING_DFS_JFFS2 is not set
+# CONFIG_PKG_USING_DFS_UFFS is not set
+# CONFIG_PKG_USING_LWEXT4 is not set
 # CONFIG_PKG_USING_THREAD_POOL is not set
 # CONFIG_PKG_USING_ROBOTS is not set
 # CONFIG_PKG_USING_EV is not set
@@ -366,24 +421,14 @@ CONFIG_RT_USING_LIBC=y
 # CONFIG_PKG_USING_RAMDISK is not set
 # CONFIG_PKG_USING_MININI is not set
 # CONFIG_PKG_USING_QBOOT is not set
-
-#
-# Micrium: Micrium software products porting for RT-Thread
-#
-# CONFIG_PKG_USING_UCOSIII_WRAPPER is not set
-# CONFIG_PKG_USING_UCOSII_WRAPPER is not set
-# CONFIG_PKG_USING_UC_CRC is not set
-# CONFIG_PKG_USING_UC_CLK is not set
-# CONFIG_PKG_USING_UC_COMMON is not set
-# CONFIG_PKG_USING_UC_MODBUS is not set
 # CONFIG_PKG_USING_PPOOL is not set
 # CONFIG_PKG_USING_OPENAMP is not set
 # CONFIG_PKG_USING_RT_KPRINTF_THREADSAFE is not set
-# CONFIG_PKG_USING_RT_MEMCPY_CM is not set
-# CONFIG_PKG_USING_QFPLIB_M0_FULL is not set
-# CONFIG_PKG_USING_QFPLIB_M0_TINY is not set
-# CONFIG_PKG_USING_QFPLIB_M3 is not set
 # CONFIG_PKG_USING_LPM is not set
+# CONFIG_PKG_USING_TLSF is not set
+# CONFIG_PKG_USING_EVENT_RECORDER is not set
+# CONFIG_PKG_USING_ARM_2D is not set
+# CONFIG_PKG_USING_WCWIDTH is not set
 
 #
 # peripheral libraries and drivers
@@ -408,7 +453,6 @@ CONFIG_RT_USING_LIBC=y
 # CONFIG_PKG_USING_WM_LIBRARIES is not set
 # CONFIG_PKG_USING_KENDRYTE_SDK is not set
 # CONFIG_PKG_USING_INFRARED is not set
-# CONFIG_PKG_USING_ROSSERIAL is not set
 # CONFIG_PKG_USING_AGILE_BUTTON is not set
 # CONFIG_PKG_USING_AGILE_LED is not set
 # CONFIG_PKG_USING_AT24CXX is not set
@@ -446,10 +490,55 @@ CONFIG_RT_USING_LIBC=y
 # CONFIG_PKG_USING_VIRTUAL_SENSOR is not set
 # CONFIG_PKG_USING_VDEVICE is not set
 # CONFIG_PKG_USING_SGM706 is not set
+# CONFIG_PKG_USING_STM32WB55_SDK is not set
+# CONFIG_PKG_USING_RDA58XX is not set
+# CONFIG_PKG_USING_LIBNFC is not set
+# CONFIG_PKG_USING_MFOC is not set
+# CONFIG_PKG_USING_TMC51XX is not set
+# CONFIG_PKG_USING_TCA9534 is not set
+# CONFIG_PKG_USING_KOBUKI is not set
+# CONFIG_PKG_USING_ROSSERIAL is not set
+# CONFIG_PKG_USING_MICRO_ROS is not set
+# CONFIG_PKG_USING_MCP23008 is not set
+# CONFIG_PKG_USING_BLUETRUM_SDK is not set
+
+#
+# AI packages
+#
+# CONFIG_PKG_USING_LIBANN is not set
+# CONFIG_PKG_USING_NNOM is not set
+# CONFIG_PKG_USING_ONNX_BACKEND is not set
+# CONFIG_PKG_USING_ONNX_PARSER is not set
+# CONFIG_PKG_USING_TENSORFLOWLITEMICRO is not set
+# CONFIG_PKG_USING_ELAPACK is not set
+# CONFIG_PKG_USING_ULAPACK is not set
+# CONFIG_PKG_USING_QUEST is not set
+# CONFIG_PKG_USING_NAXOS is not set
 
 #
 # miscellaneous packages
 #
+
+#
+# samples: kernel and components samples
+#
+# CONFIG_PKG_USING_KERNEL_SAMPLES is not set
+# CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set
+# CONFIG_PKG_USING_NETWORK_SAMPLES is not set
+# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
+
+#
+# entertainment: terminal games and other interesting software packages
+#
+# CONFIG_PKG_USING_CMATRIX is not set
+# CONFIG_PKG_USING_SL is not set
+# CONFIG_PKG_USING_CAL is not set
+# CONFIG_PKG_USING_ACLOCK is not set
+# CONFIG_PKG_USING_THREES is not set
+# CONFIG_PKG_USING_2048 is not set
+# CONFIG_PKG_USING_SNAKE is not set
+# CONFIG_PKG_USING_TETRIS is not set
+# CONFIG_PKG_USING_DONUT is not set
 # CONFIG_PKG_USING_LIBCSV is not set
 # CONFIG_PKG_USING_OPTPARSE is not set
 # CONFIG_PKG_USING_FASTLZ is not set
@@ -460,44 +549,25 @@ CONFIG_RT_USING_LIBC=y
 # CONFIG_PKG_USING_FLEXIBLE_BUTTON is not set
 # CONFIG_PKG_USING_CANFESTIVAL is not set
 # CONFIG_PKG_USING_ZLIB is not set
+# CONFIG_PKG_USING_MINIZIP is not set
 # CONFIG_PKG_USING_DSTR is not set
 # CONFIG_PKG_USING_TINYFRAME is not set
 # CONFIG_PKG_USING_KENDRYTE_DEMO is not set
 # CONFIG_PKG_USING_DIGITALCTRL is not set
 # CONFIG_PKG_USING_UPACKER is not set
 # CONFIG_PKG_USING_UPARAM is not set
-
-#
-# samples: kernel and components samples
-#
-# CONFIG_PKG_USING_KERNEL_SAMPLES is not set
-# CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set
-# CONFIG_PKG_USING_NETWORK_SAMPLES is not set
-# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
 # CONFIG_PKG_USING_HELLO is not set
 # CONFIG_PKG_USING_VI is not set
 # CONFIG_PKG_USING_KI is not set
-# CONFIG_PKG_USING_NNOM is not set
-# CONFIG_PKG_USING_LIBANN is not set
-# CONFIG_PKG_USING_ELAPACK is not set
 # CONFIG_PKG_USING_ARMv7M_DWT is not set
 # CONFIG_PKG_USING_VT100 is not set
-# CONFIG_PKG_USING_ULAPACK is not set
 # CONFIG_PKG_USING_UKAL is not set
 # CONFIG_PKG_USING_CRCLIB is not set
-
-#
-# games: games run on RT-Thread console
-#
-# CONFIG_PKG_USING_THREES is not set
-# CONFIG_PKG_USING_2048 is not set
-# CONFIG_PKG_USING_SNAKE is not set
-# CONFIG_PKG_USING_TETRIS is not set
 # CONFIG_PKG_USING_LWGPS is not set
-# CONFIG_PKG_USING_TENSORFLOWLITEMICRO is not set
 # CONFIG_PKG_USING_STATE_MACHINE is not set
 # CONFIG_PKG_USING_MCURSES is not set
 # CONFIG_PKG_USING_COWSAY is not set
+# CONFIG_PKG_USING_TERMBOX is not set
 
 #
 # Hardware Drivers Config
@@ -508,8 +578,8 @@ CONFIG_SOC_SWM320=y
 # On-chip Peripheral Drivers
 #
 CONFIG_BSP_USING_UART=y
-CONFIG_BSP_USING_UART0=y
-# CONFIG_BSP_USING_UART1 is not set
+# CONFIG_BSP_USING_UART0 is not set
+CONFIG_BSP_USING_UART1=y
 # CONFIG_BSP_USING_UART2 is not set
 # CONFIG_BSP_USING_UART3 is not set
 CONFIG_BSP_USING_GPIO=y

bsp/swm320/README.md

@@ -93,7 +93,7 @@
   - 32K片内时钟源
   - 2～32MHz片外晶振
 
-芯片更多详细信息请参考[华芯微特技术支持][http://www.synwit.cn/support-1/3.html]。
+芯片更多详细信息请参考[华芯微特技术支持](http://www.synwit.cn/support-1/3.html)。
 
 ## 编译说明
 
@@ -119,7 +119,7 @@
 
 - 使用 Jlink 连接开发板到 PC （需要 Jlink 驱动）
 
-将串口 0 引脚为：`[PA2/PA3]`和 USB 转串口模块 P2 相连，串口配置方式为115200-N-8-1。
+将串口 1 引脚为：`[PC2/PC3]`和 USB 转串口模块 J11 相连，串口配置方式为115200-N-8-1。
 
 当使用 [env工具](https://www.rt-thread.org/page/download.html) 正确编译产生出rtthread.bin映像文件后，可以使用 ISP 的方式来烧写到设备中。
 
@@ -166,4 +166,4 @@ msh />
 
 * [RT-Thread 文档中心](https://www.rt-thread.org/document/site/)
 
-* [SWM320数据手册](http://www.synwit.cn/support-1/3.html)
+* [SWM320数据手册](https://www.synwit.cn/col.jsp?id=155)

bsp/swm320/applications/main.c

 /*
- * Copyright (c) 2006-2018, RT-Thread Development Team
+ * Copyright (c) 2006-2021, RT-Thread Development Team
  *
  * SPDX-License-Identifier: Apache-2.0
  *
@@ -10,7 +10,7 @@
 #include <rtthread.h>
 #include <rtdevice.h>
 
-#define LED_PIN 21
+#define LED_PIN 32
 
 int main(void)
 {
@@ -29,7 +29,7 @@ int main(void)
 }
 
 // #ifdef RT_USING_PIN
-// #define KEY1_PIN 25
+// #define KEY1_PIN 31
 // void key1_cb(void *args)
 // {
 //     rt_kprintf("key1 irq!\n");
@@ -46,7 +46,7 @@ int main(void)
 // #endif
 
 #ifdef RT_USING_ADC
-#define ADC_DEV_NAME "adc0"
+#define ADC_DEV_NAME "adc1"
 #define ADC_DEV_CHANNEL 0
 #define REFER_VOLTAGE 330
 #define CONVERT_BITS (1 << 12)
@@ -64,16 +64,15 @@ static int adc_vol_sample(int argc, char *argv[])
         return RT_ERROR;
     }
 
-    while (1)
-    {
     ret = rt_adc_enable(adc_dev, ADC_DEV_CHANNEL);
+
     value = rt_adc_read(adc_dev, ADC_DEV_CHANNEL);
     rt_kprintf("the value is :%d,", value);
+
     vol = value * REFER_VOLTAGE / CONVERT_BITS;
     rt_kprintf("the voltage is :%d.%02d \n", vol / 100, vol % 100);
-        rt_thread_mdelay(500);
+
     ret = rt_adc_disable(adc_dev, ADC_DEV_CHANNEL);
-    }
 
     return ret;
 }
@@ -143,17 +142,17 @@ MSH_CMD_EXPORT(hwtimer_sample, hwtimer sample);
 #endif
 
 #ifdef RT_USING_PWM
-#define PWM_DEV_NAME "pwm0" /* PWM???? */
-#define PWM_DEV_CHANNEL 0   /* PWM?? */
+#define PWM_DEV_NAME "pwm0" /* PWM设备名称 */
+#define PWM_DEV_CHANNEL 0   /* PWM通道 */
 
-struct rt_device_pwm *pwm_dev; /* PWM???? */
+struct rt_device_pwm *pwm_dev; /* PWM设备句柄 */
 
 static int pwm_sample(int argc, char *argv[])
 {
     rt_uint32_t period, pulse;
 
-    period = 500000; /* ???0.5ms,?????ns */
-    pulse = 250000;  /* PWM?????,?????ns */
+    period = 500000; /* 周期为0.5ms,单位为纳秒ns */
+    pulse = 250000;  /* PWM脉冲宽度值,单位为纳秒ns */
 
     pwm_dev = (struct rt_device_pwm *)rt_device_find(PWM_DEV_NAME);
     if (pwm_dev == RT_NULL)
@@ -170,26 +169,27 @@ MSH_CMD_EXPORT(pwm_sample, pwm sample);
 #endif
 
 #ifdef RT_USING_RTC
+#include <time.h>
 static int rtc_sample(int argc, char *argv[])
 {
     rt_err_t ret = RT_EOK;
     time_t now;
 
-    ret = set_date(2020, 6, 15);
+    ret = set_date(2020, 2, 28);
     if (ret != RT_EOK)
     {
         rt_kprintf("set RTC date failed\n");
         return ret;
     }
 
-    ret = set_time(11, 15, 50);
+    ret = set_time(23, 59, 55);
     if (ret != RT_EOK)
     {
         rt_kprintf("set RTC time failed\n");
         return ret;
     }
 
-    rt_thread_mdelay(3000);
+    //rt_thread_mdelay(3000);
     now = time(RT_NULL);
     rt_kprintf("%s\n", ctime(&now));
 
@@ -205,7 +205,7 @@ static rt_device_t wdg_dev;
 
 static void idle_hook(void)
 {
-    rt_device_control(wdg_dev, RT_DEVICE_CTRL_WDT_KEEPALIVE, NULL);
+    rt_device_control(wdg_dev, RT_DEVICE_CTRL_WDT_KEEPALIVE, RT_NULL);
     rt_kprintf("feed the dog!\n ");
 }
 
@@ -264,7 +264,7 @@ MSH_CMD_EXPORT(wdt_sample, wdt sample);
 
 static int rt_hw_spi_flash_init(void)
 {
-    rt_hw_spi_device_attach("spi0", "spi00", GPIOA, PIN12);
+    rt_hw_spi_device_attach("spi0", "spi00", GPIOP, PIN22);
 
     if (RT_NULL == rt_sfud_flash_probe(W25Q_FLASH_NAME, W25Q_SPI_DEVICE_NAME))
     {
@@ -273,7 +273,6 @@ static int rt_hw_spi_flash_init(void)
 
     return RT_EOK;
 }
-/* ???????? */
 INIT_COMPONENT_EXPORT(rt_hw_spi_flash_init);
 
 static void spi_w25q_sample(int argc, char *argv[])
@@ -292,12 +291,12 @@ static void spi_w25q_sample(int argc, char *argv[])
         rt_strncpy(name, W25Q_SPI_DEVICE_NAME, RT_NAME_MAX);
     }
 
-    /* ?? spi ???????? */
+    /* 查找 spi 设备获取设备句柄 */
     spi_dev_w25q = (struct rt_spi_device *)rt_device_find(name);
     struct rt_spi_configuration cfg;
     cfg.data_width = 8;
     cfg.mode = RT_SPI_MASTER | RT_SPI_MODE_0 | RT_SPI_MSB;
-    cfg.max_hz = 20 * 1000 * 1000; /* 20M */
+    cfg.max_hz = 30 * 1000 * 1000; /* 20M */
 
     rt_spi_configure(spi_dev_w25q, &cfg);
     if (!spi_dev_w25q)
@@ -306,11 +305,11 @@ static void spi_w25q_sample(int argc, char *argv[])
     }
     else
     {
-        /* ??1:?? rt_spi_send_then_recv()??????ID */
+        /* 方式1：使用 rt_spi_send_then_recv()发送命令读取ID */
         rt_spi_send_then_recv(spi_dev_w25q, &w25x_read_id, 1, id, 5);
         rt_kprintf("use rt_spi_send_then_recv() read w25q ID is:%x%x\n", id[3], id[4]);
 
-        /* ??2:?? rt_spi_transfer_message()??????ID */
+        /* 方式2：使用 rt_spi_transfer_message()发送命令读取ID */
         struct rt_spi_message msg1, msg2;
 
         msg1.send_buf = &w25x_read_id;
@@ -352,7 +351,6 @@ static void spi_flash_elmfat_sample(void)
 
     rt_kprintf("Write string '%s' to /user/test.txt.\n", str);
 
-    /* ????????????,??????????????*/
     fd = open("/user/test.txt", O_WRONLY | O_CREAT);
     if (fd >= 0)
     {
@@ -362,7 +360,6 @@ static void spi_flash_elmfat_sample(void)
         close(fd);
     }
 
-    /* ????????? */
     fd = open("/user/test.txt", O_RDONLY);
     if (fd >= 0)
     {
@@ -397,7 +394,7 @@ MSH_CMD_EXPORT(spi_w25q_sample, spi w25q sample);
 //{
 //    int fd, size;
 //    struct statfs elm_stat;
-//    char str[] = "elmfat mount to sdcard.\r\n", buf[80];
+//    char str[] = "elmfat mount to sdcard.", buf[80];
 
 //    if (dfs_mkfs("elm", SDCARD_NAME) == 0)
 //        rt_kprintf("make elmfat filesystem success.\n");

bsp/swm320/drivers/Kconfig

@@ -245,11 +245,11 @@ menu "On-chip Peripheral Drivers"
         select RT_USING_SPI
         if BSP_USING_SPI
             config BSP_USING_SPI0
-                bool "Enable SPI0 BUS(CS/A12,MISO/A11,MOSI/A10,CLK/A9)"
+                bool "Enable SPI0 BUS(CS/P22,MISO/P19,MOSI/P18,CLK/P23)"
                 default n
 
             config BSP_USING_SPI1
-                bool "Enable SPI1 BUS(CS/C4,MISO/C5,MOSI/C6,CLK/C7)"
+                bool "Enable SPI1 BUS(CS/B6,MISO/B3,MOSI/B2,CLK/B1)"
                 default n
         endif
 

bsp/swm320/drivers/board.c

@@ -17,6 +17,7 @@ static void bsp_clock_config(void)
     SysTick_Config(SystemCoreClock / RT_TICK_PER_SECOND);
     SysTick->CTRL |= 0x00000004UL;
 }
+
 void SysTick_Handler(void)
 {
     /* enter interrupt */
@@ -28,6 +29,41 @@ void SysTick_Handler(void)
     rt_interrupt_leave();
 }
 
+/**
+ * This function will delay for some us.
+ *
+ * @param us the delay time of us
+ */
+void rt_hw_us_delay(rt_uint32_t us)
+{
+    rt_uint32_t ticks;
+    rt_uint32_t told, tnow, tcnt = 0;
+    rt_uint32_t reload = SysTick->LOAD;
+
+    ticks = us * reload / (1000000 / RT_TICK_PER_SECOND);
+    told = SysTick->VAL;
+    while (1)
+    {
+        tnow = SysTick->VAL;
+        if (tnow != told)
+        {
+            if (tnow < told)
+            {
+                tcnt += told - tnow;
+            }
+            else
+            {
+                tcnt += reload - tnow + told;
+            }
+            told = tnow;
+            if (tcnt >= ticks)
+            {
+                break;
+            }
+        }
+    }
+}
+
 void rt_hw_board_init()
 {
     bsp_clock_config();

bsp/swm320/drivers/drv_crypto.c

@@ -21,11 +21,6 @@ struct swm_hwcrypto_device
 
 #ifdef BSP_USING_CRC
 
-struct hash_ctx_des
-{
-    struct swm_crc_cfg contex;
-};
-
 static struct hwcrypto_crc_cfg crc_backup_cfg;
 
 static rt_uint32_t _crc_update(struct hwcrypto_crc *ctx, const rt_uint8_t *in, rt_size_t length)
@@ -108,6 +103,7 @@ static const struct hwcrypto_crc_ops crc_ops =
     {
         .update = _crc_update,
 };
+#endif /* BSP_USING_CRC */
 
 static rt_err_t _crypto_create(struct rt_hwcrypto_ctx *ctx)
 {
@@ -170,7 +166,7 @@ static rt_err_t _crypto_clone(struct rt_hwcrypto_ctx *des, const struct rt_hwcry
     case HWCRYPTO_TYPE_CRC:
         if (des->contex && src->contex)
         {
-            rt_memcpy(des->contex, src->contex, sizeof(struct hash_ctx_des));
+            rt_memcpy(des->contex, src->contex, sizeof(struct swm_crc_cfg));
         }
         break;
 #endif /* BSP_USING_CRC */
@@ -226,5 +222,5 @@ int rt_hw_crypto_init(void)
 }
 INIT_BOARD_EXPORT(rt_hw_crypto_init);
 
-#endif /* BSP_USING_WDT */
-#endif /* RT_USING_WDT */
+
+#endif /* RT_USING_HWCRYPTO */

bsp/swm320/drivers/drv_gpio.c

@@ -475,6 +475,7 @@ static void rt_hw_pin_isr(GPIO_TypeDef *GPIOx)
         }
     }
 }
+
 void GPIOA_Handler(void)
 {
     rt_interrupt_enter();

bsp/swm320/drivers/drv_log.h

 /*
- * Copyright (c) 2006-2018, RT-Thread Development Team
+ * Copyright (c) 2006-2021, RT-Thread Development Team
  *
  * SPDX-License-Identifier: Apache-2.0
  *

bsp/swm320/drivers/drv_rtc.c

@@ -10,6 +10,7 @@
  */
 
 #include "drv_rtc.h"
+#include <sys/time.h>
 
 #ifdef RT_USING_RTC
 #ifdef BSP_USING_RTC
@@ -18,8 +19,6 @@
 #define LOG_TAG "drv.rtc"
 #include <drv_log.h>
 
-static struct rt_device rtc_device;
-
 static uint32_t calcWeekDay(uint32_t year, uint32_t month, uint32_t date)
 {
     uint32_t i, cnt = 0;
@@ -55,8 +54,8 @@ static time_t swm_get_rtc_time_stamp(void)
     tm_new.tm_min = get_datetime.Minute;
     tm_new.tm_hour = get_datetime.Hour;
     tm_new.tm_mday = get_datetime.Date;
-    tm_new.tm_mon = get_datetime.Month - 1;
-    tm_new.tm_year = get_datetime.Year - 1900;
+    tm_new.tm_mon = get_datetime.Month;
+    tm_new.tm_year = get_datetime.Year;
 
     LOG_D("get rtc time.");
     return mktime(&tm_new);
@@ -72,9 +71,9 @@ static rt_err_t swm_set_rtc_time_stamp(time_t time_stamp)
     set_datetime.Minute = p_tm->tm_min;
     set_datetime.Hour = p_tm->tm_hour;
     set_datetime.Date = p_tm->tm_mday;
-    set_datetime.Month = p_tm->tm_mon + 1;
-    set_datetime.Year = p_tm->tm_year + 1900;
-    //    datetime.Day = p_tm->tm_wday;
+    set_datetime.Month = p_tm->tm_mon;
+    set_datetime.Year = p_tm->tm_year;
+    // set_datetime.Day = p_tm->tm_wday;
 
     RTC_Stop(RTC);
     while (RTC->CFGABLE == 0)
@@ -86,7 +85,7 @@ static rt_err_t swm_set_rtc_time_stamp(time_t time_stamp)
     RTC->MONDAY = (calcWeekDay(set_datetime.Year, set_datetime.Month, set_datetime.Date)
                    << RTC_MONDAY_DAY_Pos) |
                   ((set_datetime.Month) << RTC_MONDAY_MON_Pos);
-    RTC->YEAR = set_datetime.Year - 1901;
+    RTC->YEAR = set_datetime.Year;
     RTC->LOAD = 1 << RTC_LOAD_TIME_Pos;
     RTC_Start(RTC);
 
@@ -94,87 +93,64 @@ static rt_err_t swm_set_rtc_time_stamp(time_t time_stamp)
     return RT_EOK;
 }
 
-static rt_err_t swm_rtc_control(rt_device_t rtc_device, int cmd, void *args)
+static rt_err_t swm_rtc_init(void)
 {
-    rt_err_t result = RT_EOK;
-    RT_ASSERT(rtc_device != RT_NULL);
+    RTC_InitStructure rtc_initstruct;
 
-    switch (cmd)
-    {
-    case RT_DEVICE_CTRL_RTC_GET_TIME:
+    rtc_initstruct.Year = 2020;
+    rtc_initstruct.Month = 6;
+    rtc_initstruct.Date = 8;
+    rtc_initstruct.Hour = 12;
+    rtc_initstruct.Minute = 0;
+    rtc_initstruct.Second = 0;
+    rtc_initstruct.SecondIEn = 0;
+    rtc_initstruct.MinuteIEn = 0;
+    RTC_Init(RTC, &rtc_initstruct);
+    RTC_Start(RTC);
+
+    return RT_EOK;
+}
+
+static rt_err_t swm_rtc_get_secs(void *args)
+{
     *(rt_uint32_t *)args = swm_get_rtc_time_stamp();
     LOG_D("RTC: get rtc_time %x\n", *(rt_uint32_t *)args);
-        break;
-    case RT_DEVICE_CTRL_RTC_SET_TIME:
+
+    return RT_EOK;
+}
+
+static rt_err_t swm_rtc_set_secs(void *args)
+{
+    rt_err_t result = RT_EOK;
+
     if (swm_set_rtc_time_stamp(*(rt_uint32_t *)args))
     {
         result = -RT_ERROR;
     }
     LOG_D("RTC: set rtc_time %x\n", *(rt_uint32_t *)args);
-        break;
-    default:
-        break;
-    }
 
     return result;
 }
 
-#ifdef RT_USING_DEVICE_OPS
-const static struct rt_device_ops swm_rtc_ops =
-    {
-        RT_NULL,
+static const struct rt_rtc_ops swm_rtc_ops =
+{
+    swm_rtc_init,
+    swm_rtc_get_secs,
+    swm_rtc_set_secs,
     RT_NULL,
     RT_NULL,
     RT_NULL,
     RT_NULL,
-        swm_rtc_control};
-#endif
-
-static void swm_rtc_init(void)
-{
-    RTC_InitStructure rtc_initstruct;
-
-    rtc_initstruct.Year = 2020;
-    rtc_initstruct.Month = 6;
-    rtc_initstruct.Date = 8;
-    rtc_initstruct.Hour = 12;
-    rtc_initstruct.Minute = 0;
-    rtc_initstruct.Second = 0;
-    rtc_initstruct.SecondIEn = 0;
-    rtc_initstruct.MinuteIEn = 0;
-    RTC_Init(RTC, &rtc_initstruct);
-    RTC_Start(RTC);
-}
+};
 
-static rt_err_t rt_hw_rtc_register(rt_device_t rtc_device, const char *name, rt_uint32_t flag)
-{
-    RT_ASSERT(rtc_device != RT_NULL);
-
-    swm_rtc_init();
-
-#ifdef RT_USING_DEVICE_OPS
-    rtc_device->ops = &swm_rtc_ops;
-#else
-    rtc_device->init = RT_NULL;
-    rtc_device->open = RT_NULL;
-    rtc_device->close = RT_NULL;
-    rtc_device->read = RT_NULL;
-    rtc_device->write = RT_NULL;
-    rtc_device->control = swm_rtc_control;
-#endif
-    rtc_device->type = RT_Device_Class_RTC;
-    rtc_device->rx_indicate = RT_NULL;
-    rtc_device->tx_complete = RT_NULL;
-    rtc_device->user_data = RT_NULL;
-
-    /* register a character device */
-    return rt_device_register(rtc_device, name, flag);
-}
+static rt_rtc_dev_t swm_rtc_device;
 
 int rt_hw_rtc_init(void)
 {
     rt_err_t result;
-    result = rt_hw_rtc_register(&rtc_device, "rtc", RT_DEVICE_FLAG_RDWR);
+
+    swm_rtc_device.ops = &swm_rtc_ops;
+    result = rt_hw_rtc_register(&swm_rtc_device, "rtc", RT_DEVICE_FLAG_RDWR,RT_NULL);
     if (result != RT_EOK)
     {
         LOG_E("rtc register err code: %d", result);

bsp/swm320/drivers/drv_sdio.c

@@ -47,7 +47,7 @@ static void rthw_sdio_wait_completed(struct rthw_sdio *sdio)
     SDIO_TypeDef *hw_sdio = sdio->sdio_des.hw_sdio;
 
     if (rt_event_recv(&sdio->event, 0xffffffff, RT_EVENT_FLAG_OR | RT_EVENT_FLAG_CLEAR,
-                      rt_tick_from_millisecond(5000), &status) != RT_EOK)
+                      rt_tick_from_millisecond(1000), &status) != RT_EOK)
     {
         LOG_E("wait completed timeout");
         cmd->err = -RT_ETIMEOUT;

bsp/swm320/drivers/drv_spi.c

@@ -279,15 +279,15 @@ int rt_hw_spi_init(void)
     rt_err_t result;
 
 #ifdef BSP_USING_SPI0
-    PORT_Init(PORTA, PIN9, FUNMUX1_SPI0_SCLK, 0);
-    PORT_Init(PORTA, PIN10, FUNMUX0_SPI0_MOSI, 0);
-    PORT_Init(PORTA, PIN11, FUNMUX1_SPI0_MISO, 1);
+    PORT_Init(PORTP, PIN23, FUNMUX1_SPI0_SCLK, 0);
+    PORT_Init(PORTP, PIN18, FUNMUX0_SPI0_MOSI, 0);
+    PORT_Init(PORTP, PIN19, FUNMUX1_SPI0_MISO, 1);
 #endif //BSP_USING_SPI0
 
 #ifdef BSP_USING_SPI1
-    PORT_Init(PORTC, PIN7, FUNMUX1_SPI1_SCLK, 0);
-    PORT_Init(PORTC, PIN6, FUNMUX0_SPI1_MOSI, 0);
-    PORT_Init(PORTC, PIN5, FUNMUX1_SPI1_MISO, 1);
+    PORT_Init(PORTB, PIN1, FUNMUX1_SPI1_SCLK, 0);
+    PORT_Init(PORTB, PIN2, FUNMUX0_SPI1_MOSI, 0);
+    PORT_Init(PORTB, PIN3, FUNMUX1_SPI1_MISO, 1);
 #endif //BSP_USING_SPI1
     for (int i = 0; i < sizeof(spi_cfg) / sizeof(spi_cfg[0]); i++)
     {

bsp/swm320/drivers/linker_scripts/link.lds

-/* Entry Point */
-ENTRY(Reset_Handler)
-
-/* Specify the memory areas */
+/* Program Entry, set to mark it as "used" and avoid gc */
 MEMORY
 {
-	ROM   (arx) : ORIGIN = 0x00000000,    LENGTH = 0x00080000 /* 512k */
-    RAM   (arw) : ORIGIN = 0x20000000,    LENGTH = 0x00020000 /* 128k */
+    CODE (rx) : ORIGIN = 0x00000000, LENGTH = 512k /* 1024KB flash */
+    DATA (rw) : ORIGIN = 0x20000000, LENGTH =  128k /* 128K sram */
 }
+ENTRY(Reset_Handler)
+_system_stack_size = 0x200;
 
-/* Define output sections */
 SECTIONS
 {
-    . = ORIGIN(ROM);
     .text :
     {
-        KEEP(*(.isr_vector))
-
-        *(.text)
-        *(.text*)
+        . = ALIGN(4);
+        _stext = .;
+        KEEP(*(.isr_vector))            /* Startup code */
+        . = ALIGN(4);
+        *(.text)                        /* remaining code */
+        *(.text.*)                      /* remaining code */
+        *(.rodata)                      /* read-only data (constants) */
         *(.rodata*)
-    } > ROM
+        *(.glue_7)
+        *(.glue_7t)
+        *(.gnu.linkonce.t*)
 
+        /* section information for finsh shell */
+        . = ALIGN(4);
+        __fsymtab_start = .;
+        KEEP(*(FSymTab))
+        __fsymtab_end = .;
+        . = ALIGN(4);
+        __vsymtab_start = .;
+        KEEP(*(VSymTab))
+        __vsymtab_end = .;
+        . = ALIGN(4);
+
+        /* section information for initial. */
+        . = ALIGN(4);
+        __rt_init_start = .;
+        KEEP(*(SORT(.rti_fn*)))
+        __rt_init_end = .;
         . = ALIGN(4);
-    __data_load__ = LOADADDR(.data);
 
         . = ALIGN(4);
-    .data :
+        _etext = .;
+    } > CODE = 0
+
+    /* .ARM.exidx is sorted, so has to go in its own output section.  */
+    __exidx_start = .;
+    .ARM.exidx :
     {
-        __data_start__ = .;
+        *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+
+        /* This is used by the startup in order to initialize the .data secion */
+        _sidata = .;
+    } > CODE
+    __exidx_end = .;
+
+    /* .data section which is used for initialized data */
+
+    .data : AT (_sidata)
+    {
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .data secion */
+        _sdata = . ;
 
         *(.data)
-        *(.data*)
+        *(.data.*)
+        *(.gnu.linkonce.d*)
 
         . = ALIGN(4);
-        __data_end__ = .;
-    } > RAM AT> ROM
+        /* This is used by the startup in order to initialize the .data secion */
+        _edata = . ;
+    } >DATA
 
+    .stack : 
+    {
+        . = . + _system_stack_size;
         . = ALIGN(4);
+        _estack = .;
+    } >DATA
+
+    __bss_start = .;
     .bss :
     {
-        __bss_start__ = .;
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .bss secion */
+        _sbss = .;
 
         *(.bss)
-        *(.bss*)
+        *(.bss.*)
         *(COMMON)
 
         . = ALIGN(4);
-        __bss_end__ = .;
-    } > RAM
-    . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .bss secion */
+        _ebss = . ;
         
-    .heap :
-    {
-        end = .;
-        __HeapBase = .;
-
-        *(.heap)
-    } > RAM
+        *(.bss.init)
+    } > DATA
+    __bss_end = .;
 
-    /* .stack_dummy section doesn't contains any symbols.
-     * It is only used for linker to calculate size of stack sections */
-    .stack_dummy :
-    {
-        *(.stack)
-    } > RAM
+    _end = .;
 
-    __StackTop   = ORIGIN(RAM) + LENGTH(RAM);
-    __StackLimit = __StackTop - SIZEOF(.stack_dummy);
-    ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+    /* Stabs debugging sections.  */
+    .stab          0 : { *(.stab) }
+    .stabstr       0 : { *(.stabstr) }
+    .stab.excl     0 : { *(.stab.excl) }
+    .stab.exclstr  0 : { *(.stab.exclstr) }
+    .stab.index    0 : { *(.stab.index) }
+    .stab.indexstr 0 : { *(.stab.indexstr) }
+    .comment       0 : { *(.comment) }
+    /* DWARF debug sections.
+     * Symbols in the DWARF debugging sections are relative to the beginning
+     * of the section so we begin them at 0.  */
+    /* DWARF 1 */
+    .debug          0 : { *(.debug) }
+    .line           0 : { *(.line) }
+    /* GNU DWARF 1 extensions */
+    .debug_srcinfo  0 : { *(.debug_srcinfo) }
+    .debug_sfnames  0 : { *(.debug_sfnames) }
+    /* DWARF 1.1 and DWARF 2 */
+    .debug_aranges  0 : { *(.debug_aranges) }
+    .debug_pubnames 0 : { *(.debug_pubnames) }
+    /* DWARF 2 */
+    .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
+    .debug_abbrev   0 : { *(.debug_abbrev) }
+    .debug_line     0 : { *(.debug_line) }
+    .debug_frame    0 : { *(.debug_frame) }
+    .debug_str      0 : { *(.debug_str) }
+    .debug_loc      0 : { *(.debug_loc) }
+    .debug_macinfo  0 : { *(.debug_macinfo) }
+    /* SGI/MIPS DWARF 2 extensions */
+    .debug_weaknames 0 : { *(.debug_weaknames) }
+    .debug_funcnames 0 : { *(.debug_funcnames) }
+    .debug_typenames 0 : { *(.debug_typenames) }
+    .debug_varnames  0 : { *(.debug_varnames) }
 }

bsp/swm320/libraries/CMSIS/CoreSupport/arm_common_tables.h

@@ -85,14 +85,13 @@ extern const float32_t twiddleCoef_rfft_1024[1024];
 extern const float32_t twiddleCoef_rfft_2048[2048];
 extern const float32_t twiddleCoef_rfft_4096[4096];
 
-
 /* floating-point bit reversal tables */
-#define ARMBITREVINDEXTABLE__16_TABLE_LENGTH ((uint16_t)20  )
-#define ARMBITREVINDEXTABLE__32_TABLE_LENGTH ((uint16_t)48  )
-#define ARMBITREVINDEXTABLE__64_TABLE_LENGTH ((uint16_t)56  )
-#define ARMBITREVINDEXTABLE_128_TABLE_LENGTH ((uint16_t)208 )
-#define ARMBITREVINDEXTABLE_256_TABLE_LENGTH ((uint16_t)440 )
-#define ARMBITREVINDEXTABLE_512_TABLE_LENGTH ((uint16_t)448 )
+#define ARMBITREVINDEXTABLE__16_TABLE_LENGTH ((uint16_t)20)
+#define ARMBITREVINDEXTABLE__32_TABLE_LENGTH ((uint16_t)48)
+#define ARMBITREVINDEXTABLE__64_TABLE_LENGTH ((uint16_t)56)
+#define ARMBITREVINDEXTABLE_128_TABLE_LENGTH ((uint16_t)208)
+#define ARMBITREVINDEXTABLE_256_TABLE_LENGTH ((uint16_t)440)
+#define ARMBITREVINDEXTABLE_512_TABLE_LENGTH ((uint16_t)448)
 #define ARMBITREVINDEXTABLE1024_TABLE_LENGTH ((uint16_t)1800)
 #define ARMBITREVINDEXTABLE2048_TABLE_LENGTH ((uint16_t)3808)
 #define ARMBITREVINDEXTABLE4096_TABLE_LENGTH ((uint16_t)4032)
@@ -108,13 +107,13 @@ extern const uint16_t armBitRevIndexTable2048[ARMBITREVINDEXTABLE2048_TABLE_LENG
 extern const uint16_t armBitRevIndexTable4096[ARMBITREVINDEXTABLE4096_TABLE_LENGTH];
 
 /* fixed-point bit reversal tables */
-#define ARMBITREVINDEXTABLE_FIXED___16_TABLE_LENGTH ((uint16_t)12  )
-#define ARMBITREVINDEXTABLE_FIXED___32_TABLE_LENGTH ((uint16_t)24  )
-#define ARMBITREVINDEXTABLE_FIXED___64_TABLE_LENGTH ((uint16_t)56  )
-#define ARMBITREVINDEXTABLE_FIXED__128_TABLE_LENGTH ((uint16_t)112 )
-#define ARMBITREVINDEXTABLE_FIXED__256_TABLE_LENGTH ((uint16_t)240 )
-#define ARMBITREVINDEXTABLE_FIXED__512_TABLE_LENGTH ((uint16_t)480 )
-#define ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH ((uint16_t)992 )
+#define ARMBITREVINDEXTABLE_FIXED___16_TABLE_LENGTH ((uint16_t)12)
+#define ARMBITREVINDEXTABLE_FIXED___32_TABLE_LENGTH ((uint16_t)24)
+#define ARMBITREVINDEXTABLE_FIXED___64_TABLE_LENGTH ((uint16_t)56)
+#define ARMBITREVINDEXTABLE_FIXED__128_TABLE_LENGTH ((uint16_t)112)
+#define ARMBITREVINDEXTABLE_FIXED__256_TABLE_LENGTH ((uint16_t)240)
+#define ARMBITREVINDEXTABLE_FIXED__512_TABLE_LENGTH ((uint16_t)480)
+#define ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH ((uint16_t)992)
 #define ARMBITREVINDEXTABLE_FIXED_2048_TABLE_LENGTH ((uint16_t)1984)
 #define ARMBITREVINDEXTABLE_FIXED_4096_TABLE_LENGTH ((uint16_t)4032)
 

bsp/swm320/libraries/CMSIS/CoreSupport/arm_const_structs.h

@@ -46,34 +46,34 @@
 #include "arm_math.h"
 #include "arm_common_tables.h"
 
-   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len16;
-   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len32;
-   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len64;
-   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len128;
-   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len256;
-   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len512;
-   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len1024;
-   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len2048;
-   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len4096;
+extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len16;
+extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len32;
+extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len64;
+extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len128;
+extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len256;
+extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len512;
+extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len1024;
+extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len2048;
+extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len4096;
 
-   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len16;
-   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len32;
-   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len64;
-   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len128;
-   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len256;
-   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len512;
-   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len1024;
-   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len2048;
-   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len4096;
+extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len16;
+extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len32;
+extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len64;
+extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len128;
+extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len256;
+extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len512;
+extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len1024;
+extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len2048;
+extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len4096;
 
-   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len16;
-   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len32;
-   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len64;
-   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len128;
-   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len256;
-   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len512;
-   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len1024;
-   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len2048;
-   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len4096;
+extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len16;
+extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len32;
+extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len64;
+extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len128;
+extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len256;
+extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len512;
+extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len1024;
+extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len2048;
+extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len4096;
 
 #endif

bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_gpio.c

@@ -23,7 +23,7 @@
 
 /******************************************************************************************************************************************
 * 函数名称: GPIO_Init()
-* 功能说明:	引脚初始化，包含引脚方向、上拉电阻、下拉电阻、开漏输出
+* 功能说明: 引脚初始化，包含引脚方向、上拉电阻、下拉电阻
 * 输    入: GPIO_TypeDef * GPIOx      指定GPIO端口，有效值包括GPIOA、GPIOB、GPIOC、GPIOM、GPION、GPIOP
 *           uint32_t n             指定GPIO引脚，有效值包括PIN0、PIN1、PIN2、... ... PIN22、PIN23
 *           uint32_t dir           引脚方向，0 输入        1 输出