Skip to content

R
rt-thread

BaiXuePrincess / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 1
Star 0
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 9607beb2 编写于 作者: qiuyiuestc's avatar qiuyiuestc
浏览文件
操作

rename from lm3s to lm3s8962 

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1531 bbd45198-f89e-11dd-88c7-29a3b14d5316
上级 11eb2454
展开全部 显示空白变更内容
内联 并排
Showing with 0 addition and 84651 deletion
bsp/lm3s/Libraries/SConscript 已删除 100644 → 0
浏览文件 @ 11eb2454
Import('RTT_ROOT')
Import('rtconfig')
from building import *
# The set of source files associated with this SConscript file.
src = Split("""
driverlib/adc.c
driverlib/can.c
driverlib/comp.c
driverlib/cpu.c
driverlib/epi.c
driverlib/ethernet.c
driverlib/flash.c
driverlib/gpio.c
driverlib/hibernate.c
driverlib/i2c.c
driverlib/i2s.c
driverlib/interrupt.c
driverlib/mpu.c
driverlib/pwm.c
driverlib/qei.c
driverlib/ssi.c
driverlib/sysctl.c
driverlib/systick.c
driverlib/timer.c
driverlib/uart.c
driverlib/udma.c
driverlib/usb.c
driverlib/watchdog.c
""")
CPPPATH = [RTT_ROOT + '/bsp/lm3s/Libraries/inc', RTT_ROOT + '/bsp/lm3s/Libraries', RTT_ROOT + '/bsp/lm3s/Libraries/driverlib']
group = DefineGroup('library', src, depend = [''], CPPPATH = CPPPATH)
Return('group')
bsp/lm3s/Libraries/driverlib/adc.c 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/adc.h 已删除 100644 → 0
浏览文件 @ 11eb2454
//*****************************************************************************
//
// adc.h - ADC headers for using the ADC driver functions.
//
// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved.
// Software License Agreement
//
// Texas Instruments (TI) is supplying this software for use solely and
// exclusively on TI's microcontroller products. The software is owned by
// TI and/or its suppliers, and is protected under applicable copyright
// laws. You may not combine this software with "viral" open-source
// software in order to form a larger program.
//
// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
// DAMAGES, FOR ANY REASON WHATSOEVER.
//
// This is part of revision 6459 of the Stellaris Peripheral Driver Library.
//
//*****************************************************************************
#ifndef __ADC_H__
#define __ADC_H__
//*****************************************************************************
//
// If building with a C++ compiler, make all of the definitions in this header
// have a C binding.
//
//*****************************************************************************
#ifdef __cplusplus
extern "C"
{
#endif
//*****************************************************************************
//
// Values that can be passed to ADCSequenceConfigure as the ulTrigger
// parameter.
//
//*****************************************************************************
#define ADC_TRIGGER_PROCESSOR 0x00000000 // Processor event
#define ADC_TRIGGER_COMP0 0x00000001 // Analog comparator 0 event
#define ADC_TRIGGER_COMP1 0x00000002 // Analog comparator 1 event
#define ADC_TRIGGER_COMP2 0x00000003 // Analog comparator 2 event
#define ADC_TRIGGER_EXTERNAL 0x00000004 // External event
#define ADC_TRIGGER_TIMER 0x00000005 // Timer event
#define ADC_TRIGGER_PWM0 0x00000006 // PWM0 event
#define ADC_TRIGGER_PWM1 0x00000007 // PWM1 event
#define ADC_TRIGGER_PWM2 0x00000008 // PWM2 event
#define ADC_TRIGGER_PWM3 0x00000009 // PWM3 event
#define ADC_TRIGGER_ALWAYS 0x0000000F // Always event
//*****************************************************************************
//
// Values that can be passed to ADCSequenceStepConfigure as the ulConfig
// parameter.
//
//*****************************************************************************
#define ADC_CTL_TS 0x00000080 // Temperature sensor select
#define ADC_CTL_IE 0x00000040 // Interrupt enable
#define ADC_CTL_END 0x00000020 // Sequence end select
#define ADC_CTL_D 0x00000010 // Differential select
#define ADC_CTL_CH0 0x00000000 // Input channel 0
#define ADC_CTL_CH1 0x00000001 // Input channel 1
#define ADC_CTL_CH2 0x00000002 // Input channel 2
#define ADC_CTL_CH3 0x00000003 // Input channel 3
#define ADC_CTL_CH4 0x00000004 // Input channel 4
#define ADC_CTL_CH5 0x00000005 // Input channel 5
#define ADC_CTL_CH6 0x00000006 // Input channel 6
#define ADC_CTL_CH7 0x00000007 // Input channel 7
#define ADC_CTL_CH8 0x00000008 // Input channel 8
#define ADC_CTL_CH9 0x00000009 // Input channel 9
#define ADC_CTL_CH10 0x0000000A // Input channel 10
#define ADC_CTL_CH11 0x0000000B // Input channel 11
#define ADC_CTL_CH12 0x0000000C // Input channel 12
#define ADC_CTL_CH13 0x0000000D // Input channel 13
#define ADC_CTL_CH14 0x0000000E // Input channel 14
#define ADC_CTL_CH15 0x0000000F // Input channel 15
#define ADC_CTL_CMP0 0x00080000 // Select Comparator 0
#define ADC_CTL_CMP1 0x00090000 // Select Comparator 1
#define ADC_CTL_CMP2 0x000A0000 // Select Comparator 2
#define ADC_CTL_CMP3 0x000B0000 // Select Comparator 3
#define ADC_CTL_CMP4 0x000C0000 // Select Comparator 4
#define ADC_CTL_CMP5 0x000D0000 // Select Comparator 5
#define ADC_CTL_CMP6 0x000E0000 // Select Comparator 6
#define ADC_CTL_CMP7 0x000F0000 // Select Comparator 7
//*****************************************************************************
//
// Values that can be passed to ADCComparatorConfigure as part of the
// ulConfig parameter.
//
//*****************************************************************************
#define ADC_COMP_TRIG_NONE 0x00000000 // Trigger Disabled
#define ADC_COMP_TRIG_LOW_ALWAYS \
0x00001000 // Trigger Low Always
#define ADC_COMP_TRIG_LOW_ONCE 0x00001100 // Trigger Low Once
#define ADC_COMP_TRIG_LOW_HALWAYS \
0x00001200 // Trigger Low Always (Hysteresis)
#define ADC_COMP_TRIG_LOW_HONCE 0x00001300 // Trigger Low Once (Hysteresis)
#define ADC_COMP_TRIG_MID_ALWAYS \
0x00001400 // Trigger Mid Always
#define ADC_COMP_TRIG_MID_ONCE 0x00001500 // Trigger Mid Once
#define ADC_COMP_TRIG_HIGH_ALWAYS \
0x00001C00 // Trigger High Always
#define ADC_COMP_TRIG_HIGH_ONCE 0x00001D00 // Trigger High Once
#define ADC_COMP_TRIG_HIGH_HALWAYS \
0x00001E00 // Trigger High Always (Hysteresis)
#define ADC_COMP_TRIG_HIGH_HONCE \
0x00001F00 // Trigger High Once (Hysteresis)
#define ADC_COMP_INT_NONE 0x00000000 // Interrupt Disabled
#define ADC_COMP_INT_LOW_ALWAYS \
0x00000010 // Interrupt Low Always
#define ADC_COMP_INT_LOW_ONCE 0x00000011 // Interrupt Low Once
#define ADC_COMP_INT_LOW_HALWAYS \
0x00000012 // Interrupt Low Always
// (Hysteresis)
#define ADC_COMP_INT_LOW_HONCE 0x00000013 // Interrupt Low Once (Hysteresis)
#define ADC_COMP_INT_MID_ALWAYS \
0x00000014 // Interrupt Mid Always
#define ADC_COMP_INT_MID_ONCE 0x00000015 // Interrupt Mid Once
#define ADC_COMP_INT_HIGH_ALWAYS \
0x0000001C // Interrupt High Always
#define ADC_COMP_INT_HIGH_ONCE 0x0000001D // Interrupt High Once
#define ADC_COMP_INT_HIGH_HALWAYS \
0x0000001E // Interrupt High Always
// (Hysteresis)
#define ADC_COMP_INT_HIGH_HONCE \
0x0000001F // Interrupt High Once (Hysteresis)
//*****************************************************************************
//
// Values that can be used to modify the sequence number passed to
// ADCProcessorTrigger in order to get cross-module synchronous processor
// triggers.
//
//*****************************************************************************
#define ADC_TRIGGER_WAIT 0x08000000 // Wait for the synchronous trigger
#define ADC_TRIGGER_SIGNAL 0x80000000 // Signal the synchronous trigger
//*****************************************************************************
//
// Values that can be passed to ADCPhaseDelaySet as the ulPhase parameter and
// returned from ADCPhaseDelayGet.
//
//*****************************************************************************
#define ADC_PHASE_0 0x00000000 // 0 degrees
#define ADC_PHASE_22_5 0x00000001 // 22.5 degrees
#define ADC_PHASE_45 0x00000002 // 45 degrees
#define ADC_PHASE_67_5 0x00000003 // 67.5 degrees
#define ADC_PHASE_90 0x00000004 // 90 degrees
#define ADC_PHASE_112_5 0x00000005 // 112.5 degrees
#define ADC_PHASE_135 0x00000006 // 135 degrees
#define ADC_PHASE_157_5 0x00000007 // 157.5 degrees
#define ADC_PHASE_180 0x00000008 // 180 degrees
#define ADC_PHASE_202_5 0x00000009 // 202.5 degrees
#define ADC_PHASE_225 0x0000000A // 225 degrees
#define ADC_PHASE_247_5 0x0000000B // 247.5 degrees
#define ADC_PHASE_270 0x0000000C // 270 degrees
#define ADC_PHASE_292_5 0x0000000D // 292.5 degrees
#define ADC_PHASE_315 0x0000000E // 315 degrees
#define ADC_PHASE_337_5 0x0000000F // 337.5 degrees
//*****************************************************************************
//
// Values that can be passed to ADCReferenceSet as the ulRef parameter.
//
//*****************************************************************************
#define ADC_REF_INT 0x00000000 // Internal reference
#define ADC_REF_EXT_3V 0x00000001 // External 3V reference
//*****************************************************************************
//
// Prototypes for the APIs.
//
//*****************************************************************************
extern void ADCIntRegister(unsigned long ulBase, unsigned long ulSequenceNum,
void (*pfnHandler)(void));
extern void ADCIntUnregister(unsigned long ulBase,
unsigned long ulSequenceNum);
extern void ADCIntDisable(unsigned long ulBase, unsigned long ulSequenceNum);
extern void ADCIntEnable(unsigned long ulBase, unsigned long ulSequenceNum);
extern unsigned long ADCIntStatus(unsigned long ulBase,
unsigned long ulSequenceNum,
tBoolean bMasked);
extern void ADCIntClear(unsigned long ulBase, unsigned long ulSequenceNum);
extern void ADCSequenceEnable(unsigned long ulBase,
unsigned long ulSequenceNum);
extern void ADCSequenceDisable(unsigned long ulBase,
unsigned long ulSequenceNum);
extern void ADCSequenceConfigure(unsigned long ulBase,
unsigned long ulSequenceNum,
unsigned long ulTrigger,
unsigned long ulPriority);
extern void ADCSequenceStepConfigure(unsigned long ulBase,
unsigned long ulSequenceNum,
unsigned long ulStep,
unsigned long ulConfig);
extern long ADCSequenceOverflow(unsigned long ulBase,
unsigned long ulSequenceNum);
extern void ADCSequenceOverflowClear(unsigned long ulBase,
unsigned long ulSequenceNum);
extern long ADCSequenceUnderflow(unsigned long ulBase,
unsigned long ulSequenceNum);
extern void ADCSequenceUnderflowClear(unsigned long ulBase,
unsigned long ulSequenceNum);
extern long ADCSequenceDataGet(unsigned long ulBase,
unsigned long ulSequenceNum,
unsigned long *pulBuffer);
extern void ADCProcessorTrigger(unsigned long ulBase,
unsigned long ulSequenceNum);
extern void ADCSoftwareOversampleConfigure(unsigned long ulBase,
unsigned long ulSequenceNum,
unsigned long ulFactor);
extern void ADCSoftwareOversampleStepConfigure(unsigned long ulBase,
unsigned long ulSequenceNum,
unsigned long ulStep,
unsigned long ulConfig);
extern void ADCSoftwareOversampleDataGet(unsigned long ulBase,
unsigned long ulSequenceNum,
unsigned long *pulBuffer,
unsigned long ulCount);
extern void ADCHardwareOversampleConfigure(unsigned long ulBase,
unsigned long ulFactor);
extern void ADCComparatorConfigure(unsigned long ulBase, unsigned long ulComp,
unsigned long ulConfig);
extern void ADCComparatorRegionSet(unsigned long ulBase, unsigned long ulComp,
unsigned long ulLowRef,
unsigned long ulHighRef);
extern void ADCComparatorReset(unsigned long ulBase, unsigned long ulComp,
tBoolean bTrigger, tBoolean bInterrupt);
extern void ADCComparatorIntDisable(unsigned long ulBase,
unsigned long ulSequenceNum);
extern void ADCComparatorIntEnable(unsigned long ulBase,
unsigned long ulSequenceNum);
extern unsigned long ADCComparatorIntStatus(unsigned long ulBase);
extern void ADCComparatorIntClear(unsigned long ulBase,
unsigned long ulStatus);
extern void ADCReferenceSet(unsigned long ulBase, unsigned long ulRef);
extern unsigned long ADCReferenceGet(unsigned long ulBase);
extern void ADCPhaseDelaySet(unsigned long ulBase, unsigned long ulPhase);
extern unsigned long ADCPhaseDelayGet(unsigned long ulBase);
//*****************************************************************************
//
// Mark the end of the C bindings section for C++ compilers.
//
//*****************************************************************************
#ifdef __cplusplus
}
#endif
#endif // __ADC_H__
bsp/lm3s/Libraries/driverlib/can.c 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/can.h 已删除 100644 → 0
浏览文件 @ 11eb2454
//*****************************************************************************
//
// can.h - Defines and Macros for the CAN controller.
//
// Copyright (c) 2006-2010 Texas Instruments Incorporated. All rights reserved.
// Software License Agreement
//
// Texas Instruments (TI) is supplying this software for use solely and
// exclusively on TI's microcontroller products. The software is owned by
// TI and/or its suppliers, and is protected under applicable copyright
// laws. You may not combine this software with "viral" open-source
// software in order to form a larger program.
//
// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
// DAMAGES, FOR ANY REASON WHATSOEVER.
//
// This is part of revision 6459 of the Stellaris Peripheral Driver Library.
//
//*****************************************************************************
#ifndef __CAN_H__
#define __CAN_H__
//*****************************************************************************
//
//! \addtogroup can_api
//! @{
//
//*****************************************************************************
//*****************************************************************************
//
// If building with a C++ compiler, make all of the definitions in this header
// have a C binding.
//
//*****************************************************************************
#ifdef __cplusplus
extern "C"
{
#endif
//*****************************************************************************
//
// Miscellaneous defines for Message ID Types
//
//*****************************************************************************
//*****************************************************************************
//
// These are the flags used by the tCANMsgObject.ulFlags value when calling the
// CANMessageSet() and CANMessageGet() functions.
//
//*****************************************************************************
//
//! This definition is used with the tCANMsgObject ulFlags value and indicates
//! that transmit interrupts should be enabled, or are enabled.
//
#define MSG_OBJ_TX_INT_ENABLE 0x00000001
//
//! This indicates that receive interrupts should be enabled, or are
//! enabled.
//
#define MSG_OBJ_RX_INT_ENABLE 0x00000002
//
//! This indicates that a message object will use or is using an extended
//! identifier.
//
#define MSG_OBJ_EXTENDED_ID 0x00000004
//
//! This indicates that a message object will use or is using filtering
//! based on the object's message identifier.
//
#define MSG_OBJ_USE_ID_FILTER 0x00000008
//
//! This indicates that new data was available in the message object.
//
#define MSG_OBJ_NEW_DATA 0x00000080
//
//! This indicates that data was lost since this message object was last
//! read.
//
#define MSG_OBJ_DATA_LOST 0x00000100
//
//! This indicates that a message object will use or is using filtering
//! based on the direction of the transfer. If the direction filtering is
//! used, then ID filtering must also be enabled.
//
#define MSG_OBJ_USE_DIR_FILTER (0x00000010 | MSG_OBJ_USE_ID_FILTER)
//
//! This indicates that a message object will use or is using message
//! identifier filtering based on the extended identifier. If the extended
//! identifier filtering is used, then ID filtering must also be enabled.
//
#define MSG_OBJ_USE_EXT_FILTER (0x00000020 | MSG_OBJ_USE_ID_FILTER)
//
//! This indicates that a message object is a remote frame.
//
#define MSG_OBJ_REMOTE_FRAME 0x00000040
//
//! This indicates that this message object is part of a FIFO structure and
//! not the final message object in a FIFO.
//
#define MSG_OBJ_FIFO 0x00000200
//
//! This indicates that a message object has no flags set.
//
#define MSG_OBJ_NO_FLAGS 0x00000000
//*****************************************************************************
//
//! This define is used with the flag values to allow checking only status
//! flags and not configuration flags.
//
//*****************************************************************************
#define MSG_OBJ_STATUS_MASK (MSG_OBJ_NEW_DATA | MSG_OBJ_DATA_LOST)
//*****************************************************************************
//
//! The structure used for encapsulating all the items associated with a CAN
//! message object in the CAN controller.
//
//*****************************************************************************
typedef struct
{
//
//! The CAN message identifier used for 11 or 29 bit identifiers.
//
unsigned long ulMsgID;
//
//! The message identifier mask used when identifier filtering is enabled.
//
unsigned long ulMsgIDMask;
//
//! This value holds various status flags and settings specified by
//! tCANObjFlags.
//
unsigned long ulFlags;
//
//! This value is the number of bytes of data in the message object.
//
unsigned long ulMsgLen;
//
//! This is a pointer to the message object's data.
//
unsigned char *pucMsgData;
}
tCANMsgObject;
//*****************************************************************************
//
//! This structure is used for encapsulating the values associated with setting
//! up the bit timing for a CAN controller. The structure is used when calling
//! the CANGetBitTiming and CANSetBitTiming functions.
//
//*****************************************************************************
typedef struct
{
//
//! This value holds the sum of the Synchronization, Propagation, and Phase
//! Buffer 1 segments, measured in time quanta. The valid values for this
//! setting range from 2 to 16.
//
unsigned int uSyncPropPhase1Seg;
//
//! This value holds the Phase Buffer 2 segment in time quanta. The valid
//! values for this setting range from 1 to 8.
//
unsigned int uPhase2Seg;
//
//! This value holds the Resynchronization Jump Width in time quanta. The
//! valid values for this setting range from 1 to 4.
//
unsigned int uSJW;
//
//! This value holds the CAN_CLK divider used to determine time quanta.
//! The valid values for this setting range from 1 to 1023.
//
unsigned int uQuantumPrescaler;
}
tCANBitClkParms;
//*****************************************************************************
//
//! This data type is used to identify the interrupt status register. This is
//! used when calling the CANIntStatus() function.
//
//*****************************************************************************
typedef enum
{
//
//! Read the CAN interrupt status information.
//
CAN_INT_STS_CAUSE,
//
//! Read a message object's interrupt status.
//
CAN_INT_STS_OBJECT
}
tCANIntStsReg;
//*****************************************************************************
//
//! This data type is used to identify which of several status registers to
//! read when calling the CANStatusGet() function.
//
//*****************************************************************************
typedef enum
{
//
//! Read the full CAN controller status.
//
CAN_STS_CONTROL,
//
//! Read the full 32-bit mask of message objects with a transmit request
//! set.
//
CAN_STS_TXREQUEST,
//
//! Read the full 32-bit mask of message objects with new data available.
//
CAN_STS_NEWDAT,
//
//! Read the full 32-bit mask of message objects that are enabled.
//
CAN_STS_MSGVAL
}
tCANStsReg;
//*****************************************************************************
//
// These definitions are used to specify interrupt sources to CANIntEnable()
// and CANIntDisable().
//
//*****************************************************************************
//
//! This flag is used to allow a CAN controller to generate error
//! interrupts.
//
#define CAN_INT_ERROR 0x00000008
//
//! This flag is used to allow a CAN controller to generate status
//! interrupts.
//
#define CAN_INT_STATUS 0x00000004
//
//! This flag is used to allow a CAN controller to generate any CAN
//! interrupts. If this is not set, then no interrupts will be generated
//! by the CAN controller.
//
#define CAN_INT_MASTER 0x00000002
//*****************************************************************************
//
//! This definition is used to determine the type of message object that will
//! be set up via a call to the CANMessageSet() API.
//
//*****************************************************************************
typedef enum
{
//
//! Transmit message object.
//
MSG_OBJ_TYPE_TX,
//
//! Transmit remote request message object
//
MSG_OBJ_TYPE_TX_REMOTE,
//
//! Receive message object.
//
MSG_OBJ_TYPE_RX,
//
//! Receive remote request message object.
//
MSG_OBJ_TYPE_RX_REMOTE,
//
//! Remote frame receive remote, with auto-transmit message object.
//
MSG_OBJ_TYPE_RXTX_REMOTE
}
tMsgObjType;
//*****************************************************************************
//
// The following enumeration contains all error or status indicators that can
// be returned when calling the CANStatusGet() function.
//
//*****************************************************************************
//
//! CAN controller has entered a Bus Off state.
//
#define CAN_STATUS_BUS_OFF 0x00000080
//
//! CAN controller error level has reached warning level.
//
#define CAN_STATUS_EWARN 0x00000040
//
//! CAN controller error level has reached error passive level.
//
#define CAN_STATUS_EPASS 0x00000020
//
//! A message was received successfully since the last read of this status.
//
#define CAN_STATUS_RXOK 0x00000010
//
//! A message was transmitted successfully since the last read of this
//! status.
//
#define CAN_STATUS_TXOK 0x00000008
//
//! This is the mask for the last error code field.
//
#define CAN_STATUS_LEC_MSK 0x00000007
//
//! There was no error.
//
#define CAN_STATUS_LEC_NONE 0x00000000
//
//! A bit stuffing error has occurred.
//
#define CAN_STATUS_LEC_STUFF 0x00000001
//
//! A formatting error has occurred.
//
#define CAN_STATUS_LEC_FORM 0x00000002
//
//! An acknowledge error has occurred.
//
#define CAN_STATUS_LEC_ACK 0x00000003
//
//! The bus remained a bit level of 1 for longer than is allowed.
//
#define CAN_STATUS_LEC_BIT1 0x00000004
//
//! The bus remained a bit level of 0 for longer than is allowed.
//
#define CAN_STATUS_LEC_BIT0 0x00000005
//
//! A CRC error has occurred.
//
#define CAN_STATUS_LEC_CRC 0x00000006
//
//! This is the mask for the CAN Last Error Code (LEC).
//
#define CAN_STATUS_LEC_MASK 0x00000007
//*****************************************************************************
//
// API Function prototypes
//
//*****************************************************************************
extern void CANBitTimingGet(unsigned long ulBase, tCANBitClkParms *pClkParms);
extern void CANBitTimingSet(unsigned long ulBase, tCANBitClkParms *pClkParms);
extern unsigned long CANBitRateSet(unsigned long ulBase,
unsigned long ulSourceClock,
unsigned long ulBitRate);
extern void CANDisable(unsigned long ulBase);
extern void CANEnable(unsigned long ulBase);
extern tBoolean CANErrCntrGet(unsigned long ulBase, unsigned long *pulRxCount,
unsigned long *pulTxCount);
extern void CANInit(unsigned long ulBase);
extern void CANIntClear(unsigned long ulBase, unsigned long ulIntClr);
extern void CANIntDisable(unsigned long ulBase, unsigned long ulIntFlags);
extern void CANIntEnable(unsigned long ulBase, unsigned long ulIntFlags);
extern void CANIntRegister(unsigned long ulBase, void (*pfnHandler)(void));
extern unsigned long CANIntStatus(unsigned long ulBase,
tCANIntStsReg eIntStsReg);
extern void CANIntUnregister(unsigned long ulBase);
extern void CANMessageClear(unsigned long ulBase, unsigned long ulObjID);
extern void CANMessageGet(unsigned long ulBase, unsigned long ulObjID,
tCANMsgObject *pMsgObject, tBoolean bClrPendingInt);
extern void CANMessageSet(unsigned long ulBase, unsigned long ulObjID,
tCANMsgObject *pMsgObject, tMsgObjType eMsgType);
extern tBoolean CANRetryGet(unsigned long ulBase);
extern void CANRetrySet(unsigned long ulBase, tBoolean bAutoRetry);
extern unsigned long CANStatusGet(unsigned long ulBase, tCANStsReg eStatusReg);
//*****************************************************************************
//
// Several CAN APIs have been renamed, with the original function name being
// deprecated. These defines provide backward compatibility.
//
//*****************************************************************************
#ifndef DEPRECATED
#define CANSetBitTiming(a, b) CANBitTimingSet(a, b)
#define CANGetBitTiming(a, b) CANBitTimingGet(a, b)
#endif
//*****************************************************************************
//
// Mark the end of the C bindings section for C++ compilers.
//
//*****************************************************************************
#ifdef __cplusplus
}
#endif
//*****************************************************************************
//
// Close the Doxygen group.
//! @}
//
//*****************************************************************************
#endif // __CAN_H__
bsp/lm3s/Libraries/driverlib/comp.c 已删除 100644 → 0
浏览文件 @ 11eb2454
//*****************************************************************************
//
// comp.c - Driver for the analog comparator.
//
// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved.
// Software License Agreement
//
// Texas Instruments (TI) is supplying this software for use solely and
// exclusively on TI's microcontroller products. The software is owned by
// TI and/or its suppliers, and is protected under applicable copyright
// laws. You may not combine this software with "viral" open-source
// software in order to form a larger program.
//
// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
// DAMAGES, FOR ANY REASON WHATSOEVER.
//
// This is part of revision 6459 of the Stellaris Peripheral Driver Library.
//
//*****************************************************************************
//*****************************************************************************
//
//! \addtogroup comp_api
//! @{
//
//*****************************************************************************
#include "inc/hw_comp.h"
#include "inc/hw_ints.h"
#include "inc/hw_memmap.h"
#include "inc/hw_types.h"
#include "driverlib/comp.h"
#include "driverlib/debug.h"
#include "driverlib/interrupt.h"
//*****************************************************************************
//
//! Configures a comparator.
//!
//! \param ulBase is the base address of the comparator module.
//! \param ulComp is the index of the comparator to configure.
//! \param ulConfig is the configuration of the comparator.
//!
//! This function will configure a comparator. The \e ulConfig parameter is
//! the result of a logical OR operation between the \b COMP_TRIG_xxx,
//! \b COMP_INT_xxx, \b COMP_ASRCP_xxx, and \b COMP_OUTPUT_xxx values.
//!
//! The \b COMP_TRIG_xxx term can take on the following values:
//!
//! - \b COMP_TRIG_NONE to have no trigger to the ADC.
//! - \b COMP_TRIG_HIGH to trigger the ADC when the comparator output is high.
//! - \b COMP_TRIG_LOW to trigger the ADC when the comparator output is low.
//! - \b COMP_TRIG_FALL to trigger the ADC when the comparator output goes low.
//! - \b COMP_TRIG_RISE to trigger the ADC when the comparator output goes
//! high.
//! - \b COMP_TRIG_BOTH to trigger the ADC when the comparator output goes low
//! or high.
//!
//! The \b COMP_INT_xxx term can take on the following values:
//!
//! - \b COMP_INT_HIGH to generate an interrupt when the comparator output is
//! high.
//! - \b COMP_INT_LOW to generate an interrupt when the comparator output is
//! low.
//! - \b COMP_INT_FALL to generate an interrupt when the comparator output goes
//! low.
//! - \b COMP_INT_RISE to generate an interrupt when the comparator output goes
//! high.
//! - \b COMP_INT_BOTH to generate an interrupt when the comparator output goes
//! low or high.
//!
//! The \b COMP_ASRCP_xxx term can take on the following values:
//!
//! - \b COMP_ASRCP_PIN to use the dedicated Comp+ pin as the reference
//! voltage.
//! - \b COMP_ASRCP_PIN0 to use the Comp0+ pin as the reference voltage (this
//! the same as \b COMP_ASRCP_PIN for the comparator 0).
//! - \b COMP_ASRCP_REF to use the internally generated voltage as the
//! reference voltage.
//!
//! The \b COMP_OUTPUT_xxx term can take on the following values:
//!
//! - \b COMP_OUTPUT_NORMAL to enable a non-inverted output from the comparator
//! to a device pin.
//! - \b COMP_OUTPUT_INVERT to enable an inverted output from the comparator to
//! a device pin.
//! - \b COMP_OUTPUT_NONE is deprecated and behaves the same as
//! \b COMP_OUTPUT_NORMAL.
//!
//! \return None.
//
//*****************************************************************************
void
ComparatorConfigure(unsigned long ulBase, unsigned long ulComp,
unsigned long ulConfig)
{
//
// Check the arguments.
//
ASSERT(ulBase == COMP_BASE);
ASSERT(ulComp < 3);
//
// Configure this comparator.
//
HWREG(ulBase + (ulComp * 0x20) + COMP_O_ACCTL0) = ulConfig;
}
//*****************************************************************************
//
//! Sets the internal reference voltage.
//!
//! \param ulBase is the base address of the comparator module.
//! \param ulRef is the desired reference voltage.
//!
//! This function will set the internal reference voltage value. The voltage
//! is specified as one of the following values:
//!
//! - \b COMP_REF_OFF to turn off the reference voltage
//! - \b COMP_REF_0V to set the reference voltage to 0 V
//! - \b COMP_REF_0_1375V to set the reference voltage to 0.1375 V
//! - \b COMP_REF_0_275V to set the reference voltage to 0.275 V
//! - \b COMP_REF_0_4125V to set the reference voltage to 0.4125 V
//! - \b COMP_REF_0_55V to set the reference voltage to 0.55 V
//! - \b COMP_REF_0_6875V to set the reference voltage to 0.6875 V
//! - \b COMP_REF_0_825V to set the reference voltage to 0.825 V
//! - \b COMP_REF_0_928125V to set the reference voltage to 0.928125 V
//! - \b COMP_REF_0_9625V to set the reference voltage to 0.9625 V
//! - \b COMP_REF_1_03125V to set the reference voltage to 1.03125 V
//! - \b COMP_REF_1_134375V to set the reference voltage to 1.134375 V
//! - \b COMP_REF_1_1V to set the reference voltage to 1.1 V
//! - \b COMP_REF_1_2375V to set the reference voltage to 1.2375 V
//! - \b COMP_REF_1_340625V to set the reference voltage to 1.340625 V
//! - \b COMP_REF_1_375V to set the reference voltage to 1.375 V
//! - \b COMP_REF_1_44375V to set the reference voltage to 1.44375 V
//! - \b COMP_REF_1_5125V to set the reference voltage to 1.5125 V
//! - \b COMP_REF_1_546875V to set the reference voltage to 1.546875 V
//! - \b COMP_REF_1_65V to set the reference voltage to 1.65 V
//! - \b COMP_REF_1_753125V to set the reference voltage to 1.753125 V
//! - \b COMP_REF_1_7875V to set the reference voltage to 1.7875 V
//! - \b COMP_REF_1_85625V to set the reference voltage to 1.85625 V
//! - \b COMP_REF_1_925V to set the reference voltage to 1.925 V
//! - \b COMP_REF_1_959375V to set the reference voltage to 1.959375 V
//! - \b COMP_REF_2_0625V to set the reference voltage to 2.0625 V
//! - \b COMP_REF_2_165625V to set the reference voltage to 2.165625 V
//! - \b COMP_REF_2_26875V to set the reference voltage to 2.26875 V
//! - \b COMP_REF_2_371875V to set the reference voltage to 2.371875 V
//!
//! \return None.
//
//*****************************************************************************
void
ComparatorRefSet(unsigned long ulBase, unsigned long ulRef)
{
//
// Check the arguments.
//
ASSERT(ulBase == COMP_BASE);
//
// Set the voltage reference voltage as requested.
//
HWREG(ulBase + COMP_O_ACREFCTL) = ulRef;
}
//*****************************************************************************
//
//! Gets the current comparator output value.
//!
//! \param ulBase is the base address of the comparator module.
//! \param ulComp is the index of the comparator.
//!
//! This function retrieves the current value of the comparator output.
//!
//! \return Returns \b true if the comparator output is high and \b false if
//! the comparator output is low.
//
//*****************************************************************************
tBoolean
ComparatorValueGet(unsigned long ulBase, unsigned long ulComp)
{
//
// Check the arguments.
//
ASSERT(ulBase == COMP_BASE);
ASSERT(ulComp < 3);
//
// Return the appropriate value based on the comparator's present output
// value.
//
if(HWREG(ulBase + (ulComp * 0x20) + COMP_O_ACSTAT0) & COMP_ACSTAT0_OVAL)
{
return(true);
}
else
{
return(false);
}
}
//*****************************************************************************
//
//! Registers an interrupt handler for the comparator interrupt.
//!
//! \param ulBase is the base address of the comparator module.
//! \param ulComp is the index of the comparator.
//! \param pfnHandler is a pointer to the function to be called when the
//! comparator interrupt occurs.
//!
//! This sets the handler to be called when the comparator interrupt occurs.
//! This will enable the interrupt in the interrupt controller; it is the
//! interrupt-handler's responsibility to clear the interrupt source via
//! ComparatorIntClear().
//!
//! \sa IntRegister() for important information about registering interrupt
//! handlers.
//!
//! \return None.
//
//*****************************************************************************
void
ComparatorIntRegister(unsigned long ulBase, unsigned long ulComp,
void (*pfnHandler)(void))
{
//
// Check the arguments.
//
ASSERT(ulBase == COMP_BASE);
ASSERT(ulComp < 3);
//
// Register the interrupt handler, returning an error if an error occurs.
//
IntRegister(INT_COMP0 + ulComp, pfnHandler);
//
// Enable the interrupt in the interrupt controller.
//
IntEnable(INT_COMP0 + ulComp);
//
// Enable the comparator interrupt.
//
HWREG(ulBase + COMP_O_ACINTEN) |= 1 << ulComp;
}
//*****************************************************************************
//
//! Unregisters an interrupt handler for a comparator interrupt.
//!
//! \param ulBase is the base address of the comparator module.
//! \param ulComp is the index of the comparator.
//!
//! This function will clear the handler to be called when a comparator
//! interrupt occurs. This will also mask off the interrupt in the interrupt
//! controller so that the interrupt handler no longer is called.
//!
//! \sa IntRegister() for important information about registering interrupt
//! handlers.
//!
//! \return None.
//
//*****************************************************************************
void
ComparatorIntUnregister(unsigned long ulBase, unsigned long ulComp)
{
//
// Check the arguments.
//
ASSERT(ulBase == COMP_BASE);
ASSERT(ulComp < 3);
//
// Disable the comparator interrupt.
//
HWREG(ulBase + COMP_O_ACINTEN) &= ~(1 << ulComp);
//
// Disable the interrupt in the interrupt controller.
//
IntDisable(INT_COMP0 + ulComp);
//
// Unregister the interrupt handler.
//
IntUnregister(INT_COMP0 + ulComp);
}
//*****************************************************************************
//
//! Enables the comparator interrupt.
//!
//! \param ulBase is the base address of the comparator module.
//! \param ulComp is the index of the comparator.
//!
//! This function enables generation of an interrupt from the specified
//! comparator. Only comparators whose interrupts are enabled can be reflected
//! to the processor.
//!
//! \return None.
//
//*****************************************************************************
void
ComparatorIntEnable(unsigned long ulBase, unsigned long ulComp)
{
//
// Check the arguments.
//
ASSERT(ulBase == COMP_BASE);
ASSERT(ulComp < 3);
//
// Enable the comparator interrupt.
//
HWREG(ulBase + COMP_O_ACINTEN) |= 1 << ulComp;
}
//*****************************************************************************
//
//! Disables the comparator interrupt.
//!
//! \param ulBase is the base address of the comparator module.
//! \param ulComp is the index of the comparator.
//!
//! This function disables generation of an interrupt from the specified
//! comparator. Only comparators whose interrupts are enabled can be reflected
//! to the processor.
//!
//! \return None.
//
//*****************************************************************************
void
ComparatorIntDisable(unsigned long ulBase, unsigned long ulComp)
{
//
// Check the arguments.
//
ASSERT(ulBase == COMP_BASE);
ASSERT(ulComp < 3);
//
// Disable the comparator interrupt.
//
HWREG(ulBase + COMP_O_ACINTEN) &= ~(1 << ulComp);
}
//*****************************************************************************
//
//! Gets the current interrupt status.
//!
//! \param ulBase is the base address of the comparator module.
//! \param ulComp is the index of the comparator.
//! \param bMasked is \b false if the raw interrupt status is required and
//! \b true if the masked interrupt status is required.
//!
//! This returns the interrupt status for the comparator. Either the raw or
//! the masked interrupt status can be returned.
//!
//! \return \b true if the interrupt is asserted and \b false if it is not
//! asserted.
//
//*****************************************************************************
tBoolean
ComparatorIntStatus(unsigned long ulBase, unsigned long ulComp,
tBoolean bMasked)
{
//
// Check the arguments.
//
ASSERT(ulBase == COMP_BASE);
ASSERT(ulComp < 3);
//
// Return either the interrupt status or the raw interrupt status as
// requested.
//
if(bMasked)
{
return(((HWREG(ulBase + COMP_O_ACMIS) >> ulComp) & 1) ? true : false);
}
else
{
return(((HWREG(ulBase + COMP_O_ACRIS) >> ulComp) & 1) ? true : false);
}
}
//*****************************************************************************
//
//! Clears a comparator interrupt.
//!
//! \param ulBase is the base address of the comparator module.
//! \param ulComp is the index of the comparator.
//!
//! The comparator interrupt is cleared, so that it no longer asserts. This
//! must be done in the interrupt handler to keep it from being called again
//! immediately upon exit. Note that for a level triggered interrupt, the
//! interrupt cannot be cleared until it stops asserting.
//!
//! \note Since there is a write buffer in the Cortex-M3 processor, it may take
//! several clock cycles before the interrupt source is actually cleared.
//! Therefore, it is recommended that the interrupt source be cleared early in
//! the interrupt handler (as opposed to the very last action) to avoid
//! returning from the interrupt handler before the interrupt source is
//! actually cleared. Failure to do so may result in the interrupt handler
//! being immediately reentered (since NVIC still sees the interrupt source
//! asserted).
//!
//! \return None.
//
//*****************************************************************************
void
ComparatorIntClear(unsigned long ulBase, unsigned long ulComp)
{
//
// Check the arguments.
//
ASSERT(ulBase == COMP_BASE);
ASSERT(ulComp < 3);
//
// Clear the interrupt.
//
HWREG(ulBase + COMP_O_ACMIS) = 1 << ulComp;
}
//*****************************************************************************
//
// Close the Doxygen group.
//! @}
//
//*****************************************************************************
bsp/lm3s/Libraries/driverlib/comp.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/cpu.c 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/cpu.h 已删除 100644 → 0
浏览文件 @ 11eb2454
//*****************************************************************************
//
// cpu.h - Prototypes for the CPU instruction wrapper functions.
//
// Copyright (c) 2006-2010 Texas Instruments Incorporated. All rights reserved.
// Software License Agreement
//
// Texas Instruments (TI) is supplying this software for use solely and
// exclusively on TI's microcontroller products. The software is owned by
// TI and/or its suppliers, and is protected under applicable copyright
// laws. You may not combine this software with "viral" open-source
// software in order to form a larger program.
//
// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
// DAMAGES, FOR ANY REASON WHATSOEVER.
//
// This is part of revision 6459 of the Stellaris Peripheral Driver Library.
//
//*****************************************************************************
#ifndef __CPU_H__
#define __CPU_H__
//*****************************************************************************
//
// If building with a C++ compiler, make all of the definitions in this header
// have a C binding.
//
//*****************************************************************************
#ifdef __cplusplus
extern "C"
{
#endif
//*****************************************************************************
//
// Prototypes.
//
//*****************************************************************************
extern unsigned long CPUcpsid(void);
extern unsigned long CPUcpsie(void);
extern unsigned long CPUprimask(void);
extern void CPUwfi(void);
extern unsigned long CPUbasepriGet(void);
extern void CPUbasepriSet(unsigned long ulNewBasepri);
//*****************************************************************************
//
// Mark the end of the C bindings section for C++ compilers.
//
//*****************************************************************************
#ifdef __cplusplus
}
#endif
#endif // __CPU_H__
bsp/lm3s/Libraries/driverlib/cr_project.xml 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/debug.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/driverlib.Opt 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/driverlib.Uv2 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/driverlib.ewp 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/epi.c 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/epi.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/ethernet.c 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/ethernet.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/flash.c 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/flash.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/gpio.c 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/gpio.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/hibernate.c 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/hibernate.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/i2c.c 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/i2c.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/i2s.c 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/i2s.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/interrupt.c 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/interrupt.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/mpu.c 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/mpu.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/pin_map.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/pwm.c 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/pwm.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/qei.c 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/qei.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/readme.txt 已删除 100644 → 0
浏览文件 @ 11eb2454
This project will build the Stellaris Peripheral Driver Library.
-------------------------------------------------------------------------------
Copyright (c) 2006-2010 Texas Instruments Incorporated. All rights reserved.
Software License Agreement
Texas Instruments (TI) is supplying this software for use solely and
exclusively on TI's microcontroller products. The software is owned by
TI and/or its suppliers, and is protected under applicable copyright
laws. You may not combine this software with "viral" open-source
software in order to form a larger program.
THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES, FOR ANY REASON WHATSOEVER.
This is part of revision 6459 of the Stellaris Peripheral Driver Library.
bsp/lm3s/Libraries/driverlib/rom.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/rom_map.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/ssi.c 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/ssi.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/sysctl.c 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/sysctl.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/systick.c 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/systick.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/timer.c 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/timer.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/uart.c 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/uart.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/udma.c 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/udma.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/usb.c 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/usb.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/watchdog.c 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/driverlib/watchdog.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/inc/asmdefs.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/inc/cr_project.xml 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/inc/hw_adc.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/inc/hw_can.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/inc/hw_comp.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/inc/hw_epi.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/inc/hw_ethernet.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/inc/hw_flash.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/inc/hw_gpio.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/inc/hw_hibernate.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/inc/hw_i2c.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/inc/hw_i2s.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/inc/hw_ints.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/inc/hw_memmap.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/inc/hw_nvic.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/inc/hw_pwm.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/inc/hw_qei.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/inc/hw_ssi.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/inc/hw_sysctl.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/inc/hw_timer.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/inc/hw_types.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/inc/hw_uart.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/inc/hw_udma.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/inc/hw_usb.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/inc/hw_watchdog.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/Libraries/inc/lm3s8962.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/SConscript 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/SConstruct 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/application.c 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/board.c 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/board.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/lm3s_rom.ld 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/lm3s_rom.sct 已删除 100644 → 0
浏览文件 @ 11eb2454
; *************************************************************
; *** Scatter-Loading Description File generated by uVision ***
; *************************************************************
LR_IROM1 0x00000000 0x00040000 { ; load region size_region
ER_IROM1 0x00000000 0x00040000 { ; load address = execution address
*.o (RESET, +First)
*(InRoot$$Sections)
.ANY (+RO)
}
RW_IRAM1 0x20000000 0x00010000 { ; RW data
.ANY (+RW +ZI)
}
}
bsp/lm3s/luminaryif.c 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/luminaryif.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/project.Uv2 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/rtconfig.h 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/rtconfig.py 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/sdcard.c 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/startup.c 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
bsp/lm3s/template.Uv2 已删除 100644 → 0
浏览文件 @ 11eb2454
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或