Skip to content

R
rt-thread

BaiXuePrincess / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 1
Star 0
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 5321d2fb 编写于 作者: S SummerGift
浏览文件
操作

[bsp][stm32] update f7 series bsp

上级 b92f45f8
隐藏空白更改
内联 并排
Showing with 2326 addition and 2632 deletion
bsp/stm32/stm32f767-fire-challenger/README.md
浏览文件 @ 5321d2fb
......@@ -44,7 +44,7 @@
| QSPI Flash | 支持 | |
| 电位器 | 支持 | 使用 ADC1 |
| 以太网 | 暂不支持 | 移植中 |
| MPU6050六轴传感器 | 支持 | |
| MPU6050六轴传感器 | 支持 | |
| SDRAM | 支持 | |
| SD卡 | 即将支持 | |
| CAN | 即将支持 | |
......@@ -58,7 +58,7 @@
| RTC | 支持 | |
| WDT | 支持 | |
| FLASH | 支持 | 已适配 [FAL](https://github.com/RT-Thread-packages/fal) |
| SDIO | 支持 | |
| SDIO | 暂不支持 | 即将支持 |
| PWM | 暂不支持 | 即将支持 |
| USB Device | 暂不支持 | 即将支持 |
| USB Host | 暂不支持 | 即将支持 |
......
bsp/stm32/stm32f767-fire-challenger/applications/main.c
浏览文件 @ 5321d2fb
......@@ -11,14 +11,23 @@
#include <rtthread.h>
#include <rtdevice.h>
#include <board.h>
#include "drv_gpio.h"
/* defined the LED0 pin: PH10 */
#define LED0_PIN GET_PIN(H, 10)
int main(void)
{
int count = 1;
/* set LED0 pin mode to output */
rt_pin_mode(LED0_PIN, PIN_MODE_OUTPUT);
while (count++)
{
rt_pin_write(LED0_PIN, !rt_pin_read(LED0_PIN));
rt_pin_write(LED0_PIN, PIN_HIGH);
rt_thread_mdelay(500);
rt_pin_write(LED0_PIN, PIN_LOW);
rt_thread_mdelay(500);
}
return RT_EOK;
}
bsp/stm32/stm32f767-fire-challenger/board/Kconfig
浏览文件 @ 5321d2fb
......@@ -34,40 +34,6 @@ menu "Onboard Peripheral Drivers"
select PKG_USING_MPU6XXX
default n
config BSP_USING_ETH
bool "Enable Ethernet"
default n
select RT_USING_LWIP
if BSP_USING_ETH
config EXTERNAL_PHY_ADDRESS
hex
default 0x00
endif
config BSP_USING_RGB
bool "Enable RGB LED (timer5 channel1 - 3)"
select RT_USING_PWM
select BSP_USING_PWM
select BSP_USING_PWM5
select BSP_USING_PWM5_CH1
select BSP_USING_PWM5_CH2
select BSP_USING_PWM5_CH3
default n
config BSP_USING_POT
bool "Enable potentiometer"
select BSP_USING_ADC
select BSP_USING_ADC1
default n
config BSP_USING_SDCARD
bool "Enable SDCARD (sdio)"
select BSP_USING_SDIO
select RT_USING_DFS
select RT_USING_DFS_ELMFAT
select RT_USING_PIN
default n
endmenu
menu "On-chip Peripheral Drivers"
......@@ -92,10 +58,6 @@ menu "On-chip Peripheral Drivers"
select RT_USING_SERIAL
default n
config BSP_UART_USING_DMA_RX
bool "Enable UART RX DMA support"
default n
config BSP_USING_ON_CHIP_FLASH
bool "Enable on-chip FLASH"
default n
......@@ -124,47 +86,6 @@ menu "On-chip Peripheral Drivers"
select RT_USING_QSPI
select RT_USING_SPI
default n
menuconfig BSP_USING_TIM
bool "Enable timer"
default n
select RT_USING_HWTIMER
if BSP_USING_TIM
config BSP_USING_TIM11
bool "Enable TIM11"
default n
config BSP_USING_TIM13
bool "Enable TIM13"
default n
config BSP_USING_TIM14
bool "Enable TIM14"
default n
endif
menuconfig BSP_USING_PWM
bool "Enable pwm"
default n
select RT_USING_PWM
if BSP_USING_PWM
menuconfig BSP_USING_PWM5
bool "Enable timer5 output pwm"
default n
if BSP_USING_PWM5
config BSP_USING_PWM5_CH1
bool "Enable PWM5 channel1"
default n
config BSP_USING_PWM5_CH2
bool "Enable PWM5 channel2"
default n
config BSP_USING_PWM5_CH3
bool "Enable PWM5 channel3"
default n
endif
endif
menuconfig BSP_USING_ADC
bool "Enable ADC"
......@@ -174,14 +95,24 @@ menu "On-chip Peripheral Drivers"
config BSP_USING_ADC1
bool "Enable ADC1"
default n
endif
config BSP_USING_ADC2
bool "Enable ADC2"
default n
config BSP_USING_ADC3
bool "Enable ADC3"
default n
menuconfig BSP_USING_I2C1
bool "Enable I2C1 BUS (software simulation)"
default n
select RT_USING_I2C
select RT_USING_I2C_BITOPS
select RT_USING_PIN
if BSP_USING_I2C1
comment "Notice: PB6 --> 22; PB7 --> 23"
config BSP_I2C1_SCL_PIN
int "I2C1 scl pin number"
range 1 176
default 22
config BSP_I2C1_SDA_PIN
int "I2C1 sda pin number"
range 1 176
default 23
endif
menuconfig BSP_USING_I2C2
......@@ -191,15 +122,33 @@ menu "On-chip Peripheral Drivers"
select RT_USING_I2C_BITOPS
select RT_USING_PIN
if BSP_USING_I2C2
comment "Notice: PH4 --> 116; PH5 --> 117"
comment "Notice: PC15 --> 47; PD0 --> 48"
config BSP_I2C2_SCL_PIN
int "i2c2 scl pin number"
range 1 176
default 116
default 47
config BSP_I2C2_SDA_PIN
int "I2C2 sda pin number"
range 1 176
default 117
default 48
endif
menuconfig BSP_USING_I2C3
bool "Enable I2C3 BUS (software simulation)"
default n
select RT_USING_I2C
select RT_USING_I2C_BITOPS
select RT_USING_PIN
if BSP_USING_I2C3
comment "Notice: PF12 --> 92; PF13 --> 93"
config BSP_I2C3_SCL_PIN
int "i2c3 scl pin number"
range 1 176
default 92
config BSP_I2C3_SDA_PIN
int "I2C3 sda pin number"
range 1 176
default 93
endif
menuconfig BSP_USING_I2C4
......@@ -231,12 +180,6 @@ menu "On-chip Peripheral Drivers"
select RT_USING_WDT
default n
config BSP_USING_SDIO
bool "Enable SDIO"
select RT_USING_SDIO
select RT_USING_DFS
default n
endmenu
menu "Board extended module Drivers"
......
bsp/stm32/stm32f767-fire-challenger/board/SConscript
浏览文件 @ 5321d2fb
......@@ -18,9 +18,6 @@ if GetDepend(['BSP_USING_ETH']):
if GetDepend(['BSP_USING_QSPI_FLASH']):
src += Glob('ports/drv_qspi_flash.c')
if GetDepend(['BSP_USING_SDCARD']):
src += Glob('ports/sdcard_port.c')
path = [cwd]
path += [cwd + '/CubeMX_Config/Inc']
path += [cwd + '/ports']
......
bsp/stm32/stm32f767-fire-challenger/board/board.c
浏览文件 @ 5321d2fb
......@@ -60,27 +60,3 @@ void SystemClock_Config(void)
Error_Handler();
}
}
void MX_GPIO_Init(void)
{
/* GPIO Ports Clock Enable */
__HAL_RCC_GPIOF_CLK_ENABLE();
__HAL_RCC_GPIOH_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_GPIOG_CLK_ENABLE();
__HAL_RCC_GPIOE_CLK_ENABLE();
__HAL_RCC_GPIOD_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();
}
#ifdef RT_USING_PIN
int board_pin_init(void)
{
rt_pin_mode(LED0_PIN, PIN_MODE_OUTPUT);
return 0;
}
INIT_BOARD_EXPORT(board_pin_init);
#endif /* RT_USING_PIN */
bsp/stm32/stm32f767-fire-challenger/board/board.h
浏览文件 @ 5321d2fb
......@@ -15,10 +15,6 @@
#include <stm32f7xx.h>
#include "drv_common.h"
#ifdef BSP_USING_GPIO
#include "drv_gpio.h"
#endif
#define STM32_SRAM_SIZE (512)
#define STM32_SRAM_END (0x20000000 + STM32_SRAM_SIZE * 1024)
......@@ -39,13 +35,7 @@ extern int __bss_end;
#define HEAP_END STM32_SRAM_END
/* Board Pin definitions */
#define LED0_PIN GET_PIN(H, 10)
#define LED1_PIN GET_PIN(H, 11)
#define LED2_PIN GET_PIN(H, 12)
void SystemClock_Config(void);
void MX_GPIO_Init(void);
#endif
bsp/stm32/stm32f767-fire-challenger/board/ports/sdcard_port.c 已删除 100644 → 0
浏览文件 @ b92f45f8
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2018-12-13 balanceTWK add sdcard port file
*/
#include <rtthread.h>
#ifdef BSP_USING_SDCARD
#include <dfs_elm.h>
#include <dfs_fs.h>
#include <dfs_posix.h>
#include "drv_gpio.h"
#define DBG_ENABLE
#define DBG_SECTION_NAME "app.card"
#define DBG_COLOR
#define DBG_LEVEL DBG_INFO
#include <rtdbg.h>
#define WIFI_RESET_PIN GET_PIN(G, 9)
int ewm1062_disable(void)
{
rt_pin_mode(WIFI_RESET_PIN, PIN_MODE_OUTPUT);
rt_pin_write(WIFI_RESET_PIN,PIN_LOW);
return RT_EOK;
}
INIT_BOARD_EXPORT(ewm1062_disable);
void sd_mount(void *parameter)
{
while (1)
{
rt_thread_mdelay(500);
if(rt_device_find("sd0") != RT_NULL)
{
if (dfs_mount("sd0", "/", "elm", 0, 0) == RT_EOK)
{
LOG_I("sd card mount to '/'");
break;
}
else
{
LOG_W("sd card mount to '/' failed!");
}
}
}
}
int stm32_sdcard_mount(void)
{
rt_thread_t tid;
tid = rt_thread_create("sd_mount", sd_mount, RT_NULL,
1024, RT_THREAD_PRIORITY_MAX - 2, 20);
if (tid != RT_NULL)
{
rt_thread_startup(tid);
}
else
{
LOG_E("create sd_mount thread err!");
}
return RT_EOK;
}
INIT_APP_EXPORT(stm32_sdcard_mount);
#endif /* BSP_USING_SDCARD */
bsp/stm32/stm32f767-fire-challenger/project.ewp
浏览文件 @ 5321d2fb
<project>
<fileVersion>3</fileVersion>
<configuration>
<name>rt-thread</name>
<toolchain>
<name>ARM</name>
</toolchain>
<debug>1</debug>
<settings>
<name>General</name>
<archiveVersion>3</archiveVersion>
<data>
<version>29</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>ExePath</name>
<state>build\iar\Exe</state>
</option>
<option>
<name>ObjPath</name>
<state>build\iar\Obj</state>
</option>
<option>
<name>ListPath</name>
<state>build\iar\List</state>
</option>
<option>
<name>GEndianMode</name>
<state>0</state>
</option>
<option>
<name>Input description</name>
<state>Automatic choice of formatter, without multibyte support.</state>
</option>
<option>
<name>Output description</name>
<state>Automatic choice of formatter, without multibyte support.</state>
</option>
<option>
<name>GOutputBinary</name>
<state>0</state>
</option>
<option>
<name>OGCoreOrChip</name>
<state>1</state>
</option>
<option>
<name>GRuntimeLibSelect</name>
<version>0</version>
<state>1</state>
</option>
<option>
<name>GRuntimeLibSelectSlave</name>
<version>0</version>
<state>1</state>
</option>
<option>
<name>RTDescription</name>
<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
</option>
<option>
<name>OGProductVersion</name>
<state>6.30.6.53380</state>
</option>
<option>
<name>OGLastSavedByProductVersion</name>
<state>8.11.3.13977</state>
</option>
<option>
<name>GeneralEnableMisra</name>
<state>0</state>
</option>
<option>
<name>GeneralMisraVerbose</name>
<state>0</state>
</option>
<option>
<name>OGChipSelectEditMenu</name>
<state>STM32F429IG ST STM32F429IG</state>
</option>
<option>
<name>GenLowLevelInterface</name>
<state>1</state>
</option>
<option>
<name>GEndianModeBE</name>
<state>1</state>
</option>
<option>
<name>OGBufferedTerminalOutput</name>
<state>0</state>
</option>
<option>
<name>GenStdoutInterface</name>
<state>0</state>
</option>
<option>
<name>GeneralMisraRules98</name>
<version>0</version>
<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
</option>
<option>
<name>GeneralMisraVer</name>
<state>0</state>
</option>
<option>
<name>GeneralMisraRules04</name>
<version>0</version>
<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
</option>
<option>
<name>RTConfigPath2</name>
<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
</option>
<option>
<name>GBECoreSlave</name>
<version>25</version>
<state>39</state>
</option>
<option>
<name>OGUseCmsis</name>
<state>0</state>
</option>
<option>
<name>OGUseCmsisDspLib</name>
<state>0</state>
</option>
<option>
<name>GRuntimeLibThreads</name>
<state>0</state>
</option>
<option>
<name>CoreVariant</name>
<version>25</version>
<state>39</state>
</option>
<option>
<name>GFPUDeviceSlave</name>
<state>STM32F429IG ST STM32F429IG</state>
</option>
<option>
<name>FPU2</name>
<version>0</version>
<state>4</state>
</option>
<option>
<name>NrRegs</name>
<version>0</version>
<state>1</state>
</option>
<option>
<name>NEON</name>
<state>0</state>
</option>
<option>
<name>GFPUCoreSlave2</name>
<version>25</version>
<state>39</state>
</option>
<option>
<name>OGCMSISPackSelectDevice</name>
</option>
<option>
<name>OgLibHeap</name>
<state>0</state>
</option>
<option>
<name>OGLibAdditionalLocale</name>
<state>0</state>
</option>
<option>
<name>OGPrintfVariant</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>OGPrintfMultibyteSupport</name>
<state>0</state>
</option>
<option>
<name>OGScanfVariant</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>OGScanfMultibyteSupport</name>
<state>0</state>
</option>
<option>
<name>GenLocaleTags</name>
<state />
</option>
<option>
<name>GenLocaleDisplayOnly</name>
<state />
</option>
<option>
<name>DSPExtension</name>
<state>1</state>
</option>
</data>
</settings>
<settings>
<name>ICCARM</name>
<archiveVersion>2</archiveVersion>
<data>
<version>34</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>CCOptimizationNoSizeConstraints</name>
<state>0</state>
</option>
<option>
<name>CCDefines</name>
<state />
<state>STM32F429xx</state>
<state>USE_HAL_DRIVER</state>
</option>
<option>
<name>CCPreprocFile</name>
<state>0</state>
</option>
<option>
<name>CCPreprocComments</name>
<state>0</state>
</option>
<option>
<name>CCPreprocLine</name>
<state>0</state>
</option>
<option>
<name>CCListCFile</name>
<state>0</state>
</option>
<option>
<name>CCListCMnemonics</name>
<state>0</state>
</option>
<option>
<name>CCListCMessages</name>
<state>0</state>
</option>
<option>
<name>CCListAssFile</name>
<state>0</state>
</option>
<option>
<name>CCListAssSource</name>
<state>0</state>
</option>
<option>
<name>CCEnableRemarks</name>
<state>0</state>
</option>
<option>
<name>CCDiagSuppress</name>
<state>Pa050</state>
</option>
<option>
<name>CCDiagRemark</name>
<state />
</option>
<option>
<name>CCDiagWarning</name>
<state />
</option>
<option>
<name>CCDiagError</name>
<state />
</option>
<option>
<name>CCObjPrefix</name>
<state>1</state>
</option>
<option>
<name>CCAllowList</name>
<version>1</version>
<state>00000000</state>
</option>
<option>
<name>CCDebugInfo</name>
<state>1</state>
</option>
<option>
<name>IEndianMode</name>
<state>1</state>
</option>
<option>
<name>IProcessor</name>
<state>1</state>
</option>
<option>
<name>IExtraOptionsCheck</name>
<state>0</state>
</option>
<option>
<name>IExtraOptions</name>
<state />
</option>
<option>
<name>CCLangConformance</name>
<state>0</state>
</option>
<option>
<name>CCSignedPlainChar</name>
<state>1</state>
</option>
<option>
<name>CCRequirePrototypes</name>
<state>0</state>
</option>
<option>
<name>CCDiagWarnAreErr</name>
<state>0</state>
</option>
<option>
<name>CCCompilerRuntimeInfo</name>
<state>0</state>
</option>
<option>
<name>IFpuProcessor</name>
<state>1</state>
</option>
<option>
<name>OutputFile</name>
<state>$FILE_BNAME$.o</state>
</option>
<option>
<name>CCLibConfigHeader</name>
<state>1</state>
</option>
<option>
<name>PreInclude</name>
<state />
</option>
<option>
<name>CompilerMisraOverride</name>
<state>0</state>
</option>
<option>
<name>CCIncludePath2</name>
<state />
<state>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\CMSIS\Include</state>
<state>$PROJ_DIR$\..\..\..\components\finsh</state>
<state>$PROJ_DIR$\..\..\..\libcpu\arm\common</state>
<state>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4</state>
<state>$PROJ_DIR$\..\..\..\components\drivers\include</state>
<state>$PROJ_DIR$\.</state>
<state>$PROJ_DIR$\applications</state>
<state>$PROJ_DIR$\..\libraries\HAL_Drivers\config</state>
<state>$PROJ_DIR$\board</state>
<state>$PROJ_DIR$\board\CubeMX_Config\Inc</state>
<state>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Include</state>
<state>$PROJ_DIR$\..\..\..\include</state>
<state>$PROJ_DIR$\..\libraries\HAL_Drivers</state>
<state>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Inc</state>
</option>
<option>
<name>CCStdIncCheck</name>
<state>0</state>
</option>
<option>
<name>CCCodeSection</name>
<state>.text</state>
</option>
<option>
<name>IProcessorMode2</name>
<state>1</state>
</option>
<option>
<name>CCOptLevel</name>
<state>1</state>
</option>
<option>
<name>CCOptStrategy</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CCOptLevelSlave</name>
<state>1</state>
</option>
<option>
<name>CompilerMisraRules98</name>
<version>0</version>
<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
</option>
<option>
<name>CompilerMisraRules04</name>
<version>0</version>
<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
</option>
<option>
<name>CCPosIndRopi</name>
<state>0</state>
</option>
<option>
<name>CCPosIndRwpi</name>
<state>0</state>
</option>
<option>
<name>CCPosIndNoDynInit</name>
<state>0</state>
</option>
<option>
<name>IccLang</name>
<state>0</state>
</option>
<option>
<name>IccCDialect</name>
<state>1</state>
</option>
<option>
<name>IccAllowVLA</name>
<state>0</state>
</option>
<option>
<name>IccStaticDestr</name>
<state>1</state>
</option>
<option>
<name>IccCppInlineSemantics</name>
<state>0</state>
</option>
<option>
<name>IccCmsis</name>
<state>1</state>
</option>
<option>
<name>IccFloatSemantics</name>
<state>0</state>
</option>
<option>
<name>CCNoLiteralPool</name>
<state>0</state>
</option>
<option>
<name>CCOptStrategySlave</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CCGuardCalls</name>
<state>1</state>
</option>
<option>
<name>CCEncSource</name>
<state>0</state>
</option>
<option>
<name>CCEncOutput</name>
<state>0</state>
</option>
<option>
<name>CCEncOutputBom</name>
<state>1</state>
</option>
<option>
<name>CCEncInput</name>
<state>0</state>
</option>
<option>
<name>IccExceptions2</name>
<state>0</state>
</option>
<option>
<name>IccRTTI2</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>AARM</name>
<archiveVersion>2</archiveVersion>
<data>
<version>10</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>AObjPrefix</name>
<state>1</state>
</option>
<option>
<name>AEndian</name>
<state>1</state>
</option>
<option>
<name>ACaseSensitivity</name>
<state>1</state>
</option>
<option>
<name>MacroChars</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>AWarnEnable</name>
<state>0</state>
</option>
<option>
<name>AWarnWhat</name>
<state>0</state>
</option>
<option>
<name>AWarnOne</name>
<state />
</option>
<option>
<name>AWarnRange1</name>
<state />
</option>
<option>
<name>AWarnRange2</name>
<state />
</option>
<option>
<name>ADebug</name>
<state>1</state>
</option>
<option>
<name>AltRegisterNames</name>
<state>0</state>
</option>
<option>
<name>ADefines</name>
<state />
</option>
<option>
<name>AList</name>
<state>0</state>
</option>
<option>
<name>AListHeader</name>
<state>1</state>
</option>
<option>
<name>AListing</name>
<state>1</state>
</option>
<option>
<name>Includes</name>
<state>0</state>
</option>
<option>
<name>MacDefs</name>
<state>0</state>
</option>
<option>
<name>MacExps</name>
<state>1</state>
</option>
<option>
<name>MacExec</name>
<state>0</state>
</option>
<option>
<name>OnlyAssed</name>
<state>0</state>
</option>
<option>
<name>MultiLine</name>
<state>0</state>
</option>
<option>
<name>PageLengthCheck</name>
<state>0</state>
</option>
<option>
<name>PageLength</name>
<state>80</state>
</option>
<option>
<name>TabSpacing</name>
<state>8</state>
</option>
<option>
<name>AXRef</name>
<state>0</state>
</option>
<option>
<name>AXRefDefines</name>
<state>0</state>
</option>
<option>
<name>AXRefInternal</name>
<state>0</state>
</option>
<option>
<name>AXRefDual</name>
<state>0</state>
</option>
<option>
<name>AProcessor</name>
<state>1</state>
</option>
<option>
<name>AFpuProcessor</name>
<state>1</state>
</option>
<option>
<name>AOutputFile</name>
<state>$FILE_BNAME$.o</state>
</option>
<option>
<name>ALimitErrorsCheck</name>
<state>0</state>
</option>
<option>
<name>ALimitErrorsEdit</name>
<state>100</state>
</option>
<option>
<name>AIgnoreStdInclude</name>
<state>0</state>
</option>
<option>
<name>AUserIncludes</name>
<state />
</option>
<option>
<name>AExtraOptionsCheckV2</name>
<state>0</state>
</option>
<option>
<name>AExtraOptionsV2</name>
<state />
</option>
<option>
<name>AsmNoLiteralPool</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>OBJCOPY</name>
<archiveVersion>0</archiveVersion>
<data>
<version>1</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>OOCOutputFormat</name>
<version>3</version>
<state>3</state>
</option>
<option>
<name>OCOutputOverride</name>
<state>1</state>
</option>
<option>
<name>OOCOutputFile</name>
<state>../../../rtthread.bin</state>
</option>
<option>
<name>OOCCommandLineProducer</name>
<state>1</state>
</option>
<option>
<name>OOCObjCopyEnable</name>
<state>1</state>
</option>
</data>
</settings>
<settings>
<name>CUSTOM</name>
<archiveVersion>3</archiveVersion>
<data>
<extensions />
<cmdline />
<hasPrio>0</hasPrio>
</data>
</settings>
<settings>
<name>BICOMP</name>
<archiveVersion>0</archiveVersion>
<data />
</settings>
<settings>
<name>BUILDACTION</name>
<archiveVersion>1</archiveVersion>
<data>
<prebuild />
<postbuild />
</data>
</settings>
<settings>
<name>ILINK</name>
<archiveVersion>0</archiveVersion>
<data>
<version>20</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>IlinkLibIOConfig</name>
<state>1</state>
</option>
<option>
<name>XLinkMisraHandler</name>
<state>0</state>
</option>
<option>
<name>IlinkInputFileSlave</name>
<state>0</state>
</option>
<option>
<name>IlinkOutputFile</name>
<state>project.out</state>
</option>
<option>
<name>IlinkDebugInfoEnable</name>
<state>1</state>
</option>
<option>
<name>IlinkKeepSymbols</name>
<state />
</option>
<option>
<name>IlinkRawBinaryFile</name>
<state />
</option>
<option>
<name>IlinkRawBinarySymbol</name>
<state />
</option>
<option>
<name>IlinkRawBinarySegment</name>
<state />
</option>
<option>
<name>IlinkRawBinaryAlign</name>
<state />
</option>
<option>
<name>IlinkDefines</name>
<state />
</option>
<option>
<name>IlinkConfigDefines</name>
<state />
</option>
<option>
<name>IlinkMapFile</name>
<state>0</state>
</option>
<option>
<name>IlinkLogFile</name>
<state>0</state>
</option>
<option>
<name>IlinkLogInitialization</name>
<state>0</state>
</option>
<option>
<name>IlinkLogModule</name>
<state>0</state>
</option>
<option>
<name>IlinkLogSection</name>
<state>0</state>
</option>
<option>
<name>IlinkLogVeneer</name>
<state>0</state>
</option>
<option>
<name>IlinkIcfOverride</name>
<state>1</state>
</option>
<option>
<name>IlinkIcfFile</name>
<state>$PROJ_DIR$\board\linker_scripts\link.icf</state>
</option>
<option>
<name>IlinkIcfFileSlave</name>
<state />
</option>
<option>
<name>IlinkEnableRemarks</name>
<state>0</state>
</option>
<option>
<name>IlinkSuppressDiags</name>
<state />
</option>
<option>
<name>IlinkTreatAsRem</name>
<state />
</option>
<option>
<name>IlinkTreatAsWarn</name>
<state />
</option>
<option>
<name>IlinkTreatAsErr</name>
<state />
</option>
<option>
<name>IlinkWarningsAreErrors</name>
<state>0</state>
</option>
<option>
<name>IlinkUseExtraOptions</name>
<state>0</state>
</option>
<option>
<name>IlinkExtraOptions</name>
<state />
</option>
<option>
<name>IlinkLowLevelInterfaceSlave</name>
<state>1</state>
</option>
<option>
<name>IlinkAutoLibEnable</name>
<state>1</state>
</option>
<option>
<name>IlinkAdditionalLibs</name>
<state />
</option>
<option>
<name>IlinkOverrideProgramEntryLabel</name>
<state>0</state>
</option>
<option>
<name>IlinkProgramEntryLabelSelect</name>
<state>0</state>
</option>
<option>
<name>IlinkProgramEntryLabel</name>
<state>__iar_program_start</state>
</option>
<option>
<name>DoFill</name>
<state>0</state>
</option>
<option>
<name>FillerByte</name>
<state>0xFF</state>
</option>
<option>
<name>FillerStart</name>
<state>0x0</state>
</option>
<option>
<name>FillerEnd</name>
<state>0x0</state>
</option>
<option>
<name>CrcSize</name>
<version>0</version>
<state>1</state>
</option>
<option>
<name>CrcAlign</name>
<state>1</state>
</option>
<option>
<name>CrcPoly</name>
<state>0x11021</state>
</option>
<option>
<name>CrcCompl</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CrcBitOrder</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CrcInitialValue</name>
<state>0x0</state>
</option>
<option>
<name>DoCrc</name>
<state>0</state>
</option>
<option>
<name>IlinkBE8Slave</name>
<state>1</state>
</option>
<option>
<name>IlinkBufferedTerminalOutput</name>
<state>1</state>
</option>
<option>
<name>IlinkStdoutInterfaceSlave</name>
<state>1</state>
</option>
<option>
<name>CrcFullSize</name>
<state>0</state>
</option>
<option>
<name>IlinkIElfToolPostProcess</name>
<state>0</state>
</option>
<option>
<name>IlinkLogAutoLibSelect</name>
<state>0</state>
</option>
<option>
<name>IlinkLogRedirSymbols</name>
<state>0</state>
</option>
<option>
<name>IlinkLogUnusedFragments</name>
<state>0</state>
</option>
<option>
<name>IlinkCrcReverseByteOrder</name>
<state>0</state>
</option>
<option>
<name>IlinkCrcUseAsInput</name>
<state>1</state>
</option>
<option>
<name>IlinkOptInline</name>
<state>0</state>
</option>
<option>
<name>IlinkOptExceptionsAllow</name>
<state>1</state>
</option>
<option>
<name>IlinkOptExceptionsForce</name>
<state>0</state>
</option>
<option>
<name>IlinkCmsis</name>
<state>1</state>
</option>
<option>
<name>IlinkOptMergeDuplSections</name>
<state>0</state>
</option>
<option>
<name>IlinkOptUseVfe</name>
<state>1</state>
</option>
<option>
<name>IlinkOptForceVfe</name>
<state>0</state>
</option>
<option>
<name>IlinkStackAnalysisEnable</name>
<state>0</state>
</option>
<option>
<name>IlinkStackControlFile</name>
<state />
</option>
<option>
<name>IlinkStackCallGraphFile</name>
<state />
</option>
<option>
<name>CrcAlgorithm</name>
<version>1</version>
<state>1</state>
</option>
<option>
<name>CrcUnitSize</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>IlinkThreadsSlave</name>
<state>1</state>
</option>
<option>
<name>IlinkLogCallGraph</name>
<state>0</state>
</option>
<option>
<name>IlinkIcfFile_AltDefault</name>
<state />
</option>
<option>
<name>IlinkEncInput</name>
<state>0</state>
</option>
<option>
<name>IlinkEncOutput</name>
<state>0</state>
</option>
<option>
<name>IlinkEncOutputBom</name>
<state>1</state>
</option>
<option>
<name>IlinkHeapSelect</name>
<state>1</state>
</option>
<option>
<name>IlinkLocaleSelect</name>
<state>1</state>
</option>
</data>
</settings>
<settings>
<name>IARCHIVE</name>
<archiveVersion>0</archiveVersion>
<data>
<version>0</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>IarchiveInputs</name>
<state />
</option>
<option>
<name>IarchiveOverride</name>
<state>0</state>
</option>
<option>
<name>IarchiveOutput</name>
<state>###Unitialized###</state>
</option>
</data>
</settings>
<settings>
<name>BILINK</name>
<archiveVersion>0</archiveVersion>
<data />
</settings>
</configuration>
<configuration>
<name>Release</name>
<toolchain>
<name>ARM</name>
</toolchain>
<debug>0</debug>
<settings>
<name>General</name>
<archiveVersion>3</archiveVersion>
<data>
<version>29</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>ExePath</name>
<state>Release\Exe</state>
</option>
<option>
<name>ObjPath</name>
<state>Release\Obj</state>
</option>
<option>
<name>ListPath</name>
<state>Release\List</state>
</option>
<option>
<name>GEndianMode</name>
<state>0</state>
</option>
<option>
<name>Input description</name>
<state />
</option>
<option>
<name>Output description</name>
<state />
</option>
<option>
<name>GOutputBinary</name>
<state>0</state>
</option>
<option>
<name>OGCoreOrChip</name>
<state>0</state>
</option>
<option>
<name>GRuntimeLibSelect</name>
<version>0</version>
<state>1</state>
</option>
<option>
<name>GRuntimeLibSelectSlave</name>
<version>0</version>
<state>1</state>
</option>
<option>
<name>RTDescription</name>
<state />
</option>
<option>
<name>OGProductVersion</name>
<state>6.30.6.53380</state>
</option>
<option>
<name>OGLastSavedByProductVersion</name>
<state>8.11.3.13977</state>
</option>
<option>
<name>GeneralEnableMisra</name>
<state>0</state>
</option>
<option>
<name>GeneralMisraVerbose</name>
<state>0</state>
</option>
<option>
<name>OGChipSelectEditMenu</name>
<state>Default None</state>
</option>
<option>
<name>GenLowLevelInterface</name>
<state>0</state>
</option>
<option>
<name>GEndianModeBE</name>
<state>0</state>
</option>
<option>
<name>OGBufferedTerminalOutput</name>
<state>0</state>
</option>
<option>
<name>GenStdoutInterface</name>
<state>0</state>
</option>
<option>
<name>GeneralMisraRules98</name>
<version>0</version>
<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
</option>
<option>
<name>GeneralMisraVer</name>
<state>0</state>
</option>
<option>
<name>GeneralMisraRules04</name>
<version>0</version>
<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
</option>
<option>
<name>RTConfigPath2</name>
<state />
</option>
<option>
<name>GBECoreSlave</name>
<version>25</version>
<state>1</state>
</option>
<option>
<name>OGUseCmsis</name>
<state>0</state>
</option>
<option>
<name>OGUseCmsisDspLib</name>
<state>0</state>
</option>
<option>
<name>GRuntimeLibThreads</name>
<state>0</state>
</option>
<option>
<name>CoreVariant</name>
<version>25</version>
<state>0</state>
</option>
<option>
<name>GFPUDeviceSlave</name>
<state>Default None</state>
</option>
<option>
<name>FPU2</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>NrRegs</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>NEON</name>
<state>0</state>
</option>
<option>
<name>GFPUCoreSlave2</name>
<version>25</version>
<state>0</state>
</option>
<option>
<name>OGCMSISPackSelectDevice</name>
</option>
<option>
<name>OgLibHeap</name>
<state>0</state>
</option>
<option>
<name>OGLibAdditionalLocale</name>
<state>0</state>
</option>
<option>
<name>OGPrintfVariant</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>OGPrintfMultibyteSupport</name>
<state>0</state>
</option>
<option>
<name>OGScanfVariant</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>OGScanfMultibyteSupport</name>
<state>0</state>
</option>
<option>
<name>GenLocaleTags</name>
<state />
</option>
<option>
<name>GenLocaleDisplayOnly</name>
<state />
</option>
<option>
<name>DSPExtension</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>ICCARM</name>
<archiveVersion>2</archiveVersion>
<data>
<version>34</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>CCOptimizationNoSizeConstraints</name>
<state>0</state>
</option>
<option>
<name>CCDefines</name>
<state />
<state>STM32F429xx</state>
<state>USE_HAL_DRIVER</state>
</option>
<option>
<name>CCPreprocFile</name>
<state>0</state>
</option>
<option>
<name>CCPreprocComments</name>
<state>0</state>
</option>
<option>
<name>CCPreprocLine</name>
<state>0</state>
</option>
<option>
<name>CCListCFile</name>
<state>0</state>
</option>
<option>
<name>CCListCMnemonics</name>
<state>0</state>
</option>
<option>
<name>CCListCMessages</name>
<state>0</state>
</option>
<option>
<name>CCListAssFile</name>
<state>0</state>
</option>
<option>
<name>CCListAssSource</name>
<state>0</state>
</option>
<option>
<name>CCEnableRemarks</name>
<state>0</state>
</option>
<option>
<name>CCDiagSuppress</name>
<state />
</option>
<option>
<name>CCDiagRemark</name>
<state />
</option>
<option>
<name>CCDiagWarning</name>
<state />
</option>
<option>
<name>CCDiagError</name>
<state />
</option>
<option>
<name>CCObjPrefix</name>
<state>1</state>
</option>
<option>
<name>CCAllowList</name>
<version>1</version>
<state>11111110</state>
</option>
<option>
<name>CCDebugInfo</name>
<state>0</state>
</option>
<option>
<name>IEndianMode</name>
<state>1</state>
</option>
<option>
<name>IProcessor</name>
<state>1</state>
</option>
<option>
<name>IExtraOptionsCheck</name>
<state>0</state>
</option>
<option>
<name>IExtraOptions</name>
<state />
</option>
<option>
<name>CCLangConformance</name>
<state>0</state>
</option>
<option>
<name>CCSignedPlainChar</name>
<state>1</state>
</option>
<option>
<name>CCRequirePrototypes</name>
<state>0</state>
</option>
<option>
<name>CCDiagWarnAreErr</name>
<state>0</state>
</option>
<option>
<name>CCCompilerRuntimeInfo</name>
<state>0</state>
</option>
<option>
<name>IFpuProcessor</name>
<state>1</state>
</option>
<option>
<name>OutputFile</name>
<state />
</option>
<option>
<name>CCLibConfigHeader</name>
<state>1</state>
</option>
<option>
<name>PreInclude</name>
<state />
</option>
<option>
<name>CompilerMisraOverride</name>
<state>0</state>
</option>
<option>
<name>CCIncludePath2</name>
<state />
<state>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\CMSIS\Include</state>
<state>$PROJ_DIR$\..\..\..\components\finsh</state>
<state>$PROJ_DIR$\..\..\..\libcpu\arm\common</state>
<state>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4</state>
<state>$PROJ_DIR$\..\..\..\components\drivers\include</state>
<state>$PROJ_DIR$\.</state>
<state>$PROJ_DIR$\applications</state>
<state>$PROJ_DIR$\..\libraries\HAL_Drivers\config</state>
<state>$PROJ_DIR$\board</state>
<state>$PROJ_DIR$\board\CubeMX_Config\Inc</state>
<state>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Include</state>
<state>$PROJ_DIR$\..\..\..\include</state>
<state>$PROJ_DIR$\..\libraries\HAL_Drivers</state>
<state>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Inc</state>
</option>
<option>
<name>CCStdIncCheck</name>
<state>0</state>
</option>
<option>
<name>CCCodeSection</name>
<state>.text</state>
</option>
<option>
<name>IProcessorMode2</name>
<state>1</state>
</option>
<option>
<name>CCOptLevel</name>
<state>3</state>
</option>
<option>
<name>CCOptStrategy</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CCOptLevelSlave</name>
<state>1</state>
</option>
<option>
<name>CompilerMisraRules98</name>
<version>0</version>
<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
</option>
<option>
<name>CompilerMisraRules04</name>
<version>0</version>
<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
</option>
<option>
<name>CCPosIndRopi</name>
<state>0</state>
</option>
<option>
<name>CCPosIndRwpi</name>
<state>0</state>
</option>
<option>
<name>CCPosIndNoDynInit</name>
<state>0</state>
</option>
<option>
<name>IccLang</name>
<state>0</state>
</option>
<option>
<name>IccCDialect</name>
<state>1</state>
</option>
<option>
<name>IccAllowVLA</name>
<state>0</state>
</option>
<option>
<name>IccStaticDestr</name>
<state>1</state>
</option>
<option>
<name>IccCppInlineSemantics</name>
<state>0</state>
</option>
<option>
<name>IccCmsis</name>
<state>1</state>
</option>
<option>
<name>IccFloatSemantics</name>
<state>0</state>
</option>
<option>
<name>CCNoLiteralPool</name>
<state>0</state>
</option>
<option>
<name>CCOptStrategySlave</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CCGuardCalls</name>
<state>1</state>
</option>
<option>
<name>CCEncSource</name>
<state>0</state>
</option>
<option>
<name>CCEncOutput</name>
<state>0</state>
</option>
<option>
<name>CCEncOutputBom</name>
<state>1</state>
</option>
<option>
<name>CCEncInput</name>
<state>0</state>
</option>
<option>
<name>IccExceptions2</name>
<state>0</state>
</option>
<option>
<name>IccRTTI2</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>AARM</name>
<archiveVersion>2</archiveVersion>
<data>
<version>10</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>AObjPrefix</name>
<state>1</state>
</option>
<option>
<name>AEndian</name>
<state>1</state>
</option>
<option>
<name>ACaseSensitivity</name>
<state>1</state>
</option>
<option>
<name>MacroChars</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>AWarnEnable</name>
<state>0</state>
</option>
<option>
<name>AWarnWhat</name>
<state>0</state>
</option>
<option>
<name>AWarnOne</name>
<state />
</option>
<option>
<name>AWarnRange1</name>
<state />
</option>
<option>
<name>AWarnRange2</name>
<state />
</option>
<option>
<name>ADebug</name>
<state>0</state>
</option>
<option>
<name>AltRegisterNames</name>
<state>0</state>
</option>
<option>
<name>ADefines</name>
<state />
</option>
<option>
<name>AList</name>
<state>0</state>
</option>
<option>
<name>AListHeader</name>
<state>1</state>
</option>
<option>
<name>AListing</name>
<state>1</state>
</option>
<option>
<name>Includes</name>
<state>0</state>
</option>
<option>
<name>MacDefs</name>
<state>0</state>
</option>
<option>
<name>MacExps</name>
<state>1</state>
</option>
<option>
<name>MacExec</name>
<state>0</state>
</option>
<option>
<name>OnlyAssed</name>
<state>0</state>
</option>
<option>
<name>MultiLine</name>
<state>0</state>
</option>
<option>
<name>PageLengthCheck</name>
<state>0</state>
</option>
<option>
<name>PageLength</name>
<state>80</state>
</option>
<option>
<name>TabSpacing</name>
<state>8</state>
</option>
<option>
<name>AXRef</name>
<state>0</state>
</option>
<option>
<name>AXRefDefines</name>
<state>0</state>
</option>
<option>
<name>AXRefInternal</name>
<state>0</state>
</option>
<option>
<name>AXRefDual</name>
<state>0</state>
</option>
<option>
<name>AProcessor</name>
<state>1</state>
</option>
<option>
<name>AFpuProcessor</name>
<state>1</state>
</option>
<option>
<name>AOutputFile</name>
<state />
</option>
<option>
<name>ALimitErrorsCheck</name>
<state>0</state>
</option>
<option>
<name>ALimitErrorsEdit</name>
<state>100</state>
</option>
<option>
<name>AIgnoreStdInclude</name>
<state>0</state>
</option>
<option>
<name>AUserIncludes</name>
<state />
</option>
<option>
<name>AExtraOptionsCheckV2</name>
<state>0</state>
</option>
<option>
<name>AExtraOptionsV2</name>
<state />
</option>
<option>
<name>AsmNoLiteralPool</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>OBJCOPY</name>
<archiveVersion>0</archiveVersion>
<data>
<version>1</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>OOCOutputFormat</name>
<version>3</version>
<state>0</state>
</option>
<option>
<name>OCOutputOverride</name>
<state>0</state>
</option>
<option>
<name>OOCOutputFile</name>
<state />
</option>
<option>
<name>OOCCommandLineProducer</name>
<state>1</state>
</option>
<option>
<name>OOCObjCopyEnable</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>CUSTOM</name>
<archiveVersion>3</archiveVersion>
<data>
<extensions />
<cmdline />
<hasPrio>0</hasPrio>
</data>
</settings>
<settings>
<name>BICOMP</name>
<archiveVersion>0</archiveVersion>
<data />
</settings>
<settings>
<name>BUILDACTION</name>
<archiveVersion>1</archiveVersion>
<data>
<prebuild />
<postbuild />
</data>
</settings>
<settings>
<name>ILINK</name>
<archiveVersion>0</archiveVersion>
<data>
<version>20</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>IlinkLibIOConfig</name>
<state>1</state>
</option>
<option>
<name>XLinkMisraHandler</name>
<state>0</state>
</option>
<option>
<name>IlinkInputFileSlave</name>
<state>0</state>
</option>
<option>
<name>IlinkOutputFile</name>
<state>###Unitialized###</state>
</option>
<option>
<name>IlinkDebugInfoEnable</name>
<state>1</state>
</option>
<option>
<name>IlinkKeepSymbols</name>
<state />
</option>
<option>
<name>IlinkRawBinaryFile</name>
<state />
</option>
<option>
<name>IlinkRawBinarySymbol</name>
<state />
</option>
<option>
<name>IlinkRawBinarySegment</name>
<state />
</option>
<option>
<name>IlinkRawBinaryAlign</name>
<state />
</option>
<option>
<name>IlinkDefines</name>
<state />
</option>
<option>
<name>IlinkConfigDefines</name>
<state />
</option>
<option>
<name>IlinkMapFile</name>
<state>0</state>
</option>
<option>
<name>IlinkLogFile</name>
<state>0</state>
</option>
<option>
<name>IlinkLogInitialization</name>
<state>0</state>
</option>
<option>
<name>IlinkLogModule</name>
<state>0</state>
</option>
<option>
<name>IlinkLogSection</name>
<state>0</state>
</option>
<option>
<name>IlinkLogVeneer</name>
<state>0</state>
</option>
<option>
<name>IlinkIcfOverride</name>
<state>0</state>
</option>
<option>
<name>IlinkIcfFile</name>
<state>lnk0t.icf</state>
</option>
<option>
<name>IlinkIcfFileSlave</name>
<state />
</option>
<option>
<name>IlinkEnableRemarks</name>
<state>0</state>
</option>
<option>
<name>IlinkSuppressDiags</name>
<state />
</option>
<option>
<name>IlinkTreatAsRem</name>
<state />
</option>
<option>
<name>IlinkTreatAsWarn</name>
<state />
</option>
<option>
<name>IlinkTreatAsErr</name>
<state />
</option>
<option>
<name>IlinkWarningsAreErrors</name>
<state>0</state>
</option>
<option>
<name>IlinkUseExtraOptions</name>
<state>0</state>
</option>
<option>
<name>IlinkExtraOptions</name>
<state />
</option>
<option>
<name>IlinkLowLevelInterfaceSlave</name>
<state>1</state>
</option>
<option>
<name>IlinkAutoLibEnable</name>
<state>1</state>
</option>
<option>
<name>IlinkAdditionalLibs</name>
<state />
</option>
<option>
<name>IlinkOverrideProgramEntryLabel</name>
<state>0</state>
</option>
<option>
<name>IlinkProgramEntryLabelSelect</name>
<state>0</state>
</option>
<option>
<name>IlinkProgramEntryLabel</name>
<state />
</option>
<option>
<name>DoFill</name>
<state>0</state>
</option>
<option>
<name>FillerByte</name>
<state>0xFF</state>
</option>
<option>
<name>FillerStart</name>
<state>0x0</state>
</option>
<option>
<name>FillerEnd</name>
<state>0x0</state>
</option>
<option>
<name>CrcSize</name>
<version>0</version>
<state>1</state>
</option>
<option>
<name>CrcAlign</name>
<state>1</state>
</option>
<option>
<name>CrcPoly</name>
<state>0x11021</state>
</option>
<option>
<name>CrcCompl</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CrcBitOrder</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CrcInitialValue</name>
<state>0x0</state>
</option>
<option>
<name>DoCrc</name>
<state>0</state>
</option>
<option>
<name>IlinkBE8Slave</name>
<state>1</state>
</option>
<option>
<name>IlinkBufferedTerminalOutput</name>
<state>1</state>
</option>
<option>
<name>IlinkStdoutInterfaceSlave</name>
<state>1</state>
</option>
<option>
<name>CrcFullSize</name>
<state>0</state>
</option>
<option>
<name>IlinkIElfToolPostProcess</name>
<state>0</state>
</option>
<option>
<name>IlinkLogAutoLibSelect</name>
<state>0</state>
</option>
<option>
<name>IlinkLogRedirSymbols</name>
<state>0</state>
</option>
<option>
<name>IlinkLogUnusedFragments</name>
<state>0</state>
</option>
<option>
<name>IlinkCrcReverseByteOrder</name>
<state>0</state>
</option>
<option>
<name>IlinkCrcUseAsInput</name>
<state>1</state>
</option>
<option>
<name>IlinkOptInline</name>
<state>1</state>
</option>
<option>
<name>IlinkOptExceptionsAllow</name>
<state>1</state>
</option>
<option>
<name>IlinkOptExceptionsForce</name>
<state>0</state>
</option>
<option>
<name>IlinkCmsis</name>
<state>1</state>
</option>
<option>
<name>IlinkOptMergeDuplSections</name>
<state>0</state>
</option>
<option>
<name>IlinkOptUseVfe</name>
<state>1</state>
</option>
<option>
<name>IlinkOptForceVfe</name>
<state>0</state>
</option>
<option>
<name>IlinkStackAnalysisEnable</name>
<state>0</state>
</option>
<option>
<name>IlinkStackControlFile</name>
<state />
</option>
<option>
<name>IlinkStackCallGraphFile</name>
<state />
</option>
<option>
<name>CrcAlgorithm</name>
<version>1</version>
<state>1</state>
</option>
<option>
<name>CrcUnitSize</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>IlinkThreadsSlave</name>
<state>1</state>
</option>
<option>
<name>IlinkLogCallGraph</name>
<state>0</state>
</option>
<option>
<name>IlinkIcfFile_AltDefault</name>
<state />
</option>
<option>
<name>IlinkEncInput</name>
<state>0</state>
</option>
<option>
<name>IlinkEncOutput</name>
<state>0</state>
</option>
<option>
<name>IlinkEncOutputBom</name>
<state>1</state>
</option>
<option>
<name>IlinkHeapSelect</name>
<state>1</state>
</option>
<option>
<name>IlinkLocaleSelect</name>
<state>1</state>
</option>
</data>
</settings>
<settings>
<name>IARCHIVE</name>
<archiveVersion>0</archiveVersion>
<data>
<version>0</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>IarchiveInputs</name>
<state />
</option>
<option>
<name>IarchiveOverride</name>
<state>0</state>
</option>
<option>
<name>IarchiveOutput</name>
<state>###Unitialized###</state>
</option>
</data>
</settings>
<settings>
<name>BILINK</name>
<archiveVersion>0</archiveVersion>
<data />
</settings>
</configuration>
<group>
<name>Applications</name>
<file>
<name>$PROJ_DIR$\applications\main.c</name>
</file>
</group>
<group>
<name>Drivers</name>
<file>
<name>$PROJ_DIR$\board\board.c</name>
</file>
<file>
<name>$PROJ_DIR$\board\CubeMX_Config\Src\stm32f4xx_hal_msp.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\iar\startup_stm32f429xx.s</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\HAL_Drivers\drv_gpio.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\HAL_Drivers\drv_usart.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\HAL_Drivers\drv_common.c</name>
</file>
</group>
<group>
<name>Kernel</name>
<file>
<name>$PROJ_DIR$\..\..\..\src\clock.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\components.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\device.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\idle.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\ipc.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\irq.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\kservice.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\mem.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\mempool.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\object.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\scheduler.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\signal.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\thread.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\timer.c</name>
</file>
</group>
<group>
<name>CORTEX-M4</name>
<file>
<name>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4\cpuport.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4\context_iar.S</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\libcpu\arm\common\backtrace.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\libcpu\arm\common\div0.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\libcpu\arm\common\showmem.c</name>
</file>
</group>
<group>
<name>DeviceDrivers</name>
<file>
<name>$PROJ_DIR$\..\..\..\components\drivers\misc\pin.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\drivers\serial\serial.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\drivers\src\completion.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\drivers\src\dataqueue.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\drivers\src\pipe.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\drivers\src\ringblk_buf.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\drivers\src\ringbuffer.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\drivers\src\waitqueue.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\drivers\src\workqueue.c</name>
</file>
</group>
<group>
<name>finsh</name>
<file>
<name>$PROJ_DIR$\..\..\..\components\finsh\shell.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\finsh\symbol.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\finsh\cmd.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\finsh\msh.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\finsh\msh_cmd.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\finsh\msh_file.c</name>
</file>
</group>
<group>
<name>STM32_HAL</name>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_adc.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_adc_ex.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_can.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cec.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_crc.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp_ex.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dac.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dac_ex.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dcmi.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dcmi_ex.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dfsdm.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma2d.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dsi.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_eth.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ex.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ramfunc.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_fmpi2c.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_fmpi2c_ex.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_hash.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_hash_ex.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_hcd.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c_ex.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2s.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2s_ex.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_irda.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_iwdg.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_lptim.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_ltdc.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_ltdc_ex.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_nand.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_nor.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pccard.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pcd.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pcd_ex.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_qspi.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rng.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rtc.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rtc_ex.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_sai.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_sai_ex.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_sd.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_sdram.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_smartcard.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_spdifrx.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_spi.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_sram.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim_ex.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_usart.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_wwdg.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_fmc.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_fsmc.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_sdmmc.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_usb.c</name>
</file>
</group>
</project>
<project>
<fileVersion>3</fileVersion>
<configuration>
<name>rt-thread</name>
<toolchain>
<name>ARM</name>
</toolchain>
<debug>1</debug>
<settings>
<name>General</name>
<archiveVersion>3</archiveVersion>
<data>
<version>29</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>ExePath</name>
<state>build\iar\Exe</state>
</option>
<option>
<name>ObjPath</name>
<state>build\iar\Obj</state>
</option>
<option>
<name>ListPath</name>
<state>build\iar\List</state>
</option>
<option>
<name>GEndianMode</name>
<state>0</state>
</option>
<option>
<name>Input description</name>
<state>Automatic choice of formatter, without multibyte support.</state>
</option>
<option>
<name>Output description</name>
<state>Automatic choice of formatter, without multibyte support.</state>
</option>
<option>
<name>GOutputBinary</name>
<state>0</state>
</option>
<option>
<name>OGCoreOrChip</name>
<state>1</state>
</option>
<option>
<name>GRuntimeLibSelect</name>
<version>0</version>
<state>1</state>
</option>
<option>
<name>GRuntimeLibSelectSlave</name>
<version>0</version>
<state>1</state>
</option>
<option>
<name>RTDescription</name>
<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
</option>
<option>
<name>OGProductVersion</name>
<state>6.30.6.53380</state>
</option>
<option>
<name>OGLastSavedByProductVersion</name>
<state>8.11.3.13977</state>
</option>
<option>
<name>GeneralEnableMisra</name>
<state>0</state>
</option>
<option>
<name>GeneralMisraVerbose</name>
<state>0</state>
</option>
<option>
<name>OGChipSelectEditMenu</name>
<state>STM32F407ZG ST STM32F407ZG</state>
</option>
<option>
<name>GenLowLevelInterface</name>
<state>1</state>
</option>
<option>
<name>GEndianModeBE</name>
<state>1</state>
</option>
<option>
<name>OGBufferedTerminalOutput</name>
<state>0</state>
</option>
<option>
<name>GenStdoutInterface</name>
<state>0</state>
</option>
<option>
<name>GeneralMisraRules98</name>
<version>0</version>
<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
</option>
<option>
<name>GeneralMisraVer</name>
<state>0</state>
</option>
<option>
<name>GeneralMisraRules04</name>
<version>0</version>
<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
</option>
<option>
<name>RTConfigPath2</name>
<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
</option>
<option>
<name>GBECoreSlave</name>
<version>25</version>
<state>39</state>
</option>
<option>
<name>OGUseCmsis</name>
<state>0</state>
</option>
<option>
<name>OGUseCmsisDspLib</name>
<state>0</state>
</option>
<option>
<name>GRuntimeLibThreads</name>
<state>0</state>
</option>
<option>
<name>CoreVariant</name>
<version>25</version>
<state>39</state>
</option>
<option>
<name>GFPUDeviceSlave</name>
<state>STM32F407ZG ST STM32F407ZG</state>
</option>
<option>
<name>FPU2</name>
<version>0</version>
<state>4</state>
</option>
<option>
<name>NrRegs</name>
<version>0</version>
<state>1</state>
</option>
<option>
<name>NEON</name>
<state>0</state>
</option>
<option>
<name>GFPUCoreSlave2</name>
<version>25</version>
<state>39</state>
</option>
<option>
<name>OGCMSISPackSelectDevice</name>
</option>
<option>
<name>OgLibHeap</name>
<state>0</state>
</option>
<option>
<name>OGLibAdditionalLocale</name>
<state>0</state>
</option>
<option>
<name>OGPrintfVariant</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>OGPrintfMultibyteSupport</name>
<state>0</state>
</option>
<option>
<name>OGScanfVariant</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>OGScanfMultibyteSupport</name>
<state>0</state>
</option>
<option>
<name>GenLocaleTags</name>
<state />
</option>
<option>
<name>GenLocaleDisplayOnly</name>
<state />
</option>
<option>
<name>DSPExtension</name>
<state>1</state>
</option>
</data>
</settings>
<settings>
<name>ICCARM</name>
<archiveVersion>2</archiveVersion>
<data>
<version>34</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>CCOptimizationNoSizeConstraints</name>
<state>0</state>
</option>
<option>
<name>CCDefines</name>
<state />
<state>STM32F767xx</state>
<state>USE_HAL_DRIVER</state>
</option>
<option>
<name>CCPreprocFile</name>
<state>0</state>
</option>
<option>
<name>CCPreprocComments</name>
<state>0</state>
</option>
<option>
<name>CCPreprocLine</name>
<state>0</state>
</option>
<option>
<name>CCListCFile</name>
<state>0</state>
</option>
<option>
<name>CCListCMnemonics</name>
<state>0</state>
</option>
<option>
<name>CCListCMessages</name>
<state>0</state>
</option>
<option>
<name>CCListAssFile</name>
<state>0</state>
</option>
<option>
<name>CCListAssSource</name>
<state>0</state>
</option>
<option>
<name>CCEnableRemarks</name>
<state>0</state>
</option>
<option>
<name>CCDiagSuppress</name>
<state>Pa050</state>
</option>
<option>
<name>CCDiagRemark</name>
<state />
</option>
<option>
<name>CCDiagWarning</name>
<state />
</option>
<option>
<name>CCDiagError</name>
<state />
</option>
<option>
<name>CCObjPrefix</name>
<state>1</state>
</option>
<option>
<name>CCAllowList</name>
<version>1</version>
<state>00000000</state>
</option>
<option>
<name>CCDebugInfo</name>
<state>1</state>
</option>
<option>
<name>IEndianMode</name>
<state>1</state>
</option>
<option>
<name>IProcessor</name>
<state>1</state>
</option>
<option>
<name>IExtraOptionsCheck</name>
<state>0</state>
</option>
<option>
<name>IExtraOptions</name>
<state />
</option>
<option>
<name>CCLangConformance</name>
<state>0</state>
</option>
<option>
<name>CCSignedPlainChar</name>
<state>1</state>
</option>
<option>
<name>CCRequirePrototypes</name>
<state>0</state>
</option>
<option>
<name>CCDiagWarnAreErr</name>
<state>0</state>
</option>
<option>
<name>CCCompilerRuntimeInfo</name>
<state>0</state>
</option>
<option>
<name>IFpuProcessor</name>
<state>1</state>
</option>
<option>
<name>OutputFile</name>
<state>$FILE_BNAME$.o</state>
</option>
<option>
<name>CCLibConfigHeader</name>
<state>1</state>
</option>
<option>
<name>PreInclude</name>
<state />
</option>
<option>
<name>CompilerMisraOverride</name>
<state>0</state>
</option>
<option>
<name>CCIncludePath2</name>
<state />
<state>$PROJ_DIR$\..\libraries\STM32F7xx_HAL\CMSIS\Include</state>
<state>$PROJ_DIR$\..\..\..\components\finsh</state>
<state>$PROJ_DIR$\..\..\..\libcpu\arm\common</state>
<state>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m7</state>
<state>$PROJ_DIR$\board\ports</state>
<state>$PROJ_DIR$\..\..\..\components\drivers\include</state>
<state>$PROJ_DIR$\.</state>
<state>$PROJ_DIR$\applications</state>
<state>$PROJ_DIR$\..\libraries\HAL_Drivers\config</state>
<state>$PROJ_DIR$\board</state>
<state>$PROJ_DIR$\..\libraries\STM32F7xx_HAL\STM32F7xx_HAL_Driver\Inc</state>
<state>$PROJ_DIR$\board\CubeMX_Config\Inc</state>
<state>$PROJ_DIR$\..\..\..\include</state>
<state>$PROJ_DIR$\..\libraries\HAL_Drivers</state>
<state>$PROJ_DIR$\..\libraries\STM32F7xx_HAL\CMSIS\Device\ST\STM32F7xx\Include</state>
</option>
<option>
<name>CCStdIncCheck</name>
<state>0</state>
</option>
<option>
<name>CCCodeSection</name>
<state>.text</state>
</option>
<option>
<name>IProcessorMode2</name>
<state>1</state>
</option>
<option>
<name>CCOptLevel</name>
<state>1</state>
</option>
<option>
<name>CCOptStrategy</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CCOptLevelSlave</name>
<state>1</state>
</option>
<option>
<name>CompilerMisraRules98</name>
<version>0</version>
<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
</option>
<option>
<name>CompilerMisraRules04</name>
<version>0</version>
<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
</option>
<option>
<name>CCPosIndRopi</name>
<state>0</state>
</option>
<option>
<name>CCPosIndRwpi</name>
<state>0</state>
</option>
<option>
<name>CCPosIndNoDynInit</name>
<state>0</state>
</option>
<option>
<name>IccLang</name>
<state>0</state>
</option>
<option>
<name>IccCDialect</name>
<state>1</state>
</option>
<option>
<name>IccAllowVLA</name>
<state>0</state>
</option>
<option>
<name>IccStaticDestr</name>
<state>1</state>
</option>
<option>
<name>IccCppInlineSemantics</name>
<state>0</state>
</option>
<option>
<name>IccCmsis</name>
<state>1</state>
</option>
<option>
<name>IccFloatSemantics</name>
<state>0</state>
</option>
<option>
<name>CCNoLiteralPool</name>
<state>0</state>
</option>
<option>
<name>CCOptStrategySlave</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CCGuardCalls</name>
<state>1</state>
</option>
<option>
<name>CCEncSource</name>
<state>0</state>
</option>
<option>
<name>CCEncOutput</name>
<state>0</state>
</option>
<option>
<name>CCEncOutputBom</name>
<state>1</state>
</option>
<option>
<name>CCEncInput</name>
<state>0</state>
</option>
<option>
<name>IccExceptions2</name>
<state>0</state>
</option>
<option>
<name>IccRTTI2</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>AARM</name>
<archiveVersion>2</archiveVersion>
<data>
<version>10</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>AObjPrefix</name>
<state>1</state>
</option>
<option>
<name>AEndian</name>
<state>1</state>
</option>
<option>
<name>ACaseSensitivity</name>
<state>1</state>
</option>
<option>
<name>MacroChars</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>AWarnEnable</name>
<state>0</state>
</option>
<option>
<name>AWarnWhat</name>
<state>0</state>
</option>
<option>
<name>AWarnOne</name>
<state />
</option>
<option>
<name>AWarnRange1</name>
<state />
</option>
<option>
<name>AWarnRange2</name>
<state />
</option>
<option>
<name>ADebug</name>
<state>1</state>
</option>
<option>
<name>AltRegisterNames</name>
<state>0</state>
</option>
<option>
<name>ADefines</name>
<state />
</option>
<option>
<name>AList</name>
<state>0</state>
</option>
<option>
<name>AListHeader</name>
<state>1</state>
</option>
<option>
<name>AListing</name>
<state>1</state>
</option>
<option>
<name>Includes</name>
<state>0</state>
</option>
<option>
<name>MacDefs</name>
<state>0</state>
</option>
<option>
<name>MacExps</name>
<state>1</state>
</option>
<option>
<name>MacExec</name>
<state>0</state>
</option>
<option>
<name>OnlyAssed</name>
<state>0</state>
</option>
<option>
<name>MultiLine</name>
<state>0</state>
</option>
<option>
<name>PageLengthCheck</name>
<state>0</state>
</option>
<option>
<name>PageLength</name>
<state>80</state>
</option>
<option>
<name>TabSpacing</name>
<state>8</state>
</option>
<option>
<name>AXRef</name>
<state>0</state>
</option>
<option>
<name>AXRefDefines</name>
<state>0</state>
</option>
<option>
<name>AXRefInternal</name>
<state>0</state>
</option>
<option>
<name>AXRefDual</name>
<state>0</state>
</option>
<option>
<name>AProcessor</name>
<state>1</state>
</option>
<option>
<name>AFpuProcessor</name>
<state>1</state>
</option>
<option>
<name>AOutputFile</name>
<state>$FILE_BNAME$.o</state>
</option>
<option>
<name>ALimitErrorsCheck</name>
<state>0</state>
</option>
<option>
<name>ALimitErrorsEdit</name>
<state>100</state>
</option>
<option>
<name>AIgnoreStdInclude</name>
<state>0</state>
</option>
<option>
<name>AUserIncludes</name>
<state />
</option>
<option>
<name>AExtraOptionsCheckV2</name>
<state>0</state>
</option>
<option>
<name>AExtraOptionsV2</name>
<state />
</option>
<option>
<name>AsmNoLiteralPool</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>OBJCOPY</name>
<archiveVersion>0</archiveVersion>
<data>
<version>1</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>OOCOutputFormat</name>
<version>3</version>
<state>3</state>
</option>
<option>
<name>OCOutputOverride</name>
<state>1</state>
</option>
<option>
<name>OOCOutputFile</name>
<state>../../../rtthread.bin</state>
</option>
<option>
<name>OOCCommandLineProducer</name>
<state>1</state>
</option>
<option>
<name>OOCObjCopyEnable</name>
<state>1</state>
</option>
</data>
</settings>
<settings>
<name>CUSTOM</name>
<archiveVersion>3</archiveVersion>
<data>
<extensions />
<cmdline />
<hasPrio>0</hasPrio>
</data>
</settings>
<settings>
<name>BICOMP</name>
<archiveVersion>0</archiveVersion>
<data />
</settings>
<settings>
<name>BUILDACTION</name>
<archiveVersion>1</archiveVersion>
<data>
<prebuild />
<postbuild />
</data>
</settings>
<settings>
<name>ILINK</name>
<archiveVersion>0</archiveVersion>
<data>
<version>20</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>IlinkLibIOConfig</name>
<state>1</state>
</option>
<option>
<name>XLinkMisraHandler</name>
<state>0</state>
</option>
<option>
<name>IlinkInputFileSlave</name>
<state>0</state>
</option>
<option>
<name>IlinkOutputFile</name>
<state>project.out</state>
</option>
<option>
<name>IlinkDebugInfoEnable</name>
<state>1</state>
</option>
<option>
<name>IlinkKeepSymbols</name>
<state />
</option>
<option>
<name>IlinkRawBinaryFile</name>
<state />
</option>
<option>
<name>IlinkRawBinarySymbol</name>
<state />
</option>
<option>
<name>IlinkRawBinarySegment</name>
<state />
</option>
<option>
<name>IlinkRawBinaryAlign</name>
<state />
</option>
<option>
<name>IlinkDefines</name>
<state />
</option>
<option>
<name>IlinkConfigDefines</name>
<state />
</option>
<option>
<name>IlinkMapFile</name>
<state>0</state>
</option>
<option>
<name>IlinkLogFile</name>
<state>0</state>
</option>
<option>
<name>IlinkLogInitialization</name>
<state>0</state>
</option>
<option>
<name>IlinkLogModule</name>
<state>0</state>
</option>
<option>
<name>IlinkLogSection</name>
<state>0</state>
</option>
<option>
<name>IlinkLogVeneer</name>
<state>0</state>
</option>
<option>
<name>IlinkIcfOverride</name>
<state>1</state>
</option>
<option>
<name>IlinkIcfFile</name>
<state>$PROJ_DIR$\board\linker_scripts\link.icf</state>
</option>
<option>
<name>IlinkIcfFileSlave</name>
<state />
</option>
<option>
<name>IlinkEnableRemarks</name>
<state>0</state>
</option>
<option>
<name>IlinkSuppressDiags</name>
<state />
</option>
<option>
<name>IlinkTreatAsRem</name>
<state />
</option>
<option>
<name>IlinkTreatAsWarn</name>
<state />
</option>
<option>
<name>IlinkTreatAsErr</name>
<state />
</option>
<option>
<name>IlinkWarningsAreErrors</name>
<state>0</state>
</option>
<option>
<name>IlinkUseExtraOptions</name>
<state>0</state>
</option>
<option>
<name>IlinkExtraOptions</name>
<state />
</option>
<option>
<name>IlinkLowLevelInterfaceSlave</name>
<state>1</state>
</option>
<option>
<name>IlinkAutoLibEnable</name>
<state>1</state>
</option>
<option>
<name>IlinkAdditionalLibs</name>
<state />
</option>
<option>
<name>IlinkOverrideProgramEntryLabel</name>
<state>0</state>
</option>
<option>
<name>IlinkProgramEntryLabelSelect</name>
<state>0</state>
</option>
<option>
<name>IlinkProgramEntryLabel</name>
<state>__iar_program_start</state>
</option>
<option>
<name>DoFill</name>
<state>0</state>
</option>
<option>
<name>FillerByte</name>
<state>0xFF</state>
</option>
<option>
<name>FillerStart</name>
<state>0x0</state>
</option>
<option>
<name>FillerEnd</name>
<state>0x0</state>
</option>
<option>
<name>CrcSize</name>
<version>0</version>
<state>1</state>
</option>
<option>
<name>CrcAlign</name>
<state>1</state>
</option>
<option>
<name>CrcPoly</name>
<state>0x11021</state>
</option>
<option>
<name>CrcCompl</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CrcBitOrder</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CrcInitialValue</name>
<state>0x0</state>
</option>
<option>
<name>DoCrc</name>
<state>0</state>
</option>
<option>
<name>IlinkBE8Slave</name>
<state>1</state>
</option>
<option>
<name>IlinkBufferedTerminalOutput</name>
<state>1</state>
</option>
<option>
<name>IlinkStdoutInterfaceSlave</name>
<state>1</state>
</option>
<option>
<name>CrcFullSize</name>
<state>0</state>
</option>
<option>
<name>IlinkIElfToolPostProcess</name>
<state>0</state>
</option>
<option>
<name>IlinkLogAutoLibSelect</name>
<state>0</state>
</option>
<option>
<name>IlinkLogRedirSymbols</name>
<state>0</state>
</option>
<option>
<name>IlinkLogUnusedFragments</name>
<state>0</state>
</option>
<option>
<name>IlinkCrcReverseByteOrder</name>
<state>0</state>
</option>
<option>
<name>IlinkCrcUseAsInput</name>
<state>1</state>
</option>
<option>
<name>IlinkOptInline</name>
<state>0</state>
</option>
<option>
<name>IlinkOptExceptionsAllow</name>
<state>1</state>
</option>
<option>
<name>IlinkOptExceptionsForce</name>
<state>0</state>
</option>
<option>
<name>IlinkCmsis</name>
<state>1</state>
</option>
<option>
<name>IlinkOptMergeDuplSections</name>
<state>0</state>
</option>
<option>
<name>IlinkOptUseVfe</name>
<state>1</state>
</option>
<option>
<name>IlinkOptForceVfe</name>
<state>0</state>
</option>
<option>
<name>IlinkStackAnalysisEnable</name>
<state>0</state>
</option>
<option>
<name>IlinkStackControlFile</name>
<state />
</option>
<option>
<name>IlinkStackCallGraphFile</name>
<state />
</option>
<option>
<name>CrcAlgorithm</name>
<version>1</version>
<state>1</state>
</option>
<option>
<name>CrcUnitSize</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>IlinkThreadsSlave</name>
<state>1</state>
</option>
<option>
<name>IlinkLogCallGraph</name>
<state>0</state>
</option>
<option>
<name>IlinkIcfFile_AltDefault</name>
<state />
</option>
<option>
<name>IlinkEncInput</name>
<state>0</state>
</option>
<option>
<name>IlinkEncOutput</name>
<state>0</state>
</option>
<option>
<name>IlinkEncOutputBom</name>
<state>1</state>
</option>
<option>
<name>IlinkHeapSelect</name>
<state>1</state>
</option>
<option>
<name>IlinkLocaleSelect</name>
<state>1</state>
</option>
</data>
</settings>
<settings>
<name>IARCHIVE</name>
<archiveVersion>0</archiveVersion>
<data>
<version>0</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>IarchiveInputs</name>
<state />
</option>
<option>
<name>IarchiveOverride</name>
<state>0</state>
</option>
<option>
<name>IarchiveOutput</name>
<state>###Unitialized###</state>
</option>
</data>
</settings>
<settings>
<name>BILINK</name>
<archiveVersion>0</archiveVersion>
<data />
</settings>
</configuration>
<configuration>
<name>Release</name>
<toolchain>
<name>ARM</name>
</toolchain>
<debug>0</debug>
<settings>
<name>General</name>
<archiveVersion>3</archiveVersion>
<data>
<version>29</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>ExePath</name>
<state>Release\Exe</state>
</option>
<option>
<name>ObjPath</name>
<state>Release\Obj</state>
</option>
<option>
<name>ListPath</name>
<state>Release\List</state>
</option>
<option>
<name>GEndianMode</name>
<state>0</state>
</option>
<option>
<name>Input description</name>
<state />
</option>
<option>
<name>Output description</name>
<state />
</option>
<option>
<name>GOutputBinary</name>
<state>0</state>
</option>
<option>
<name>OGCoreOrChip</name>
<state>0</state>
</option>
<option>
<name>GRuntimeLibSelect</name>
<version>0</version>
<state>1</state>
</option>
<option>
<name>GRuntimeLibSelectSlave</name>
<version>0</version>
<state>1</state>
</option>
<option>
<name>RTDescription</name>
<state />
</option>
<option>
<name>OGProductVersion</name>
<state>6.30.6.53380</state>
</option>
<option>
<name>OGLastSavedByProductVersion</name>
<state>8.11.3.13977</state>
</option>
<option>
<name>GeneralEnableMisra</name>
<state>0</state>
</option>
<option>
<name>GeneralMisraVerbose</name>
<state>0</state>
</option>
<option>
<name>OGChipSelectEditMenu</name>
<state>Default None</state>
</option>
<option>
<name>GenLowLevelInterface</name>
<state>0</state>
</option>
<option>
<name>GEndianModeBE</name>
<state>0</state>
</option>
<option>
<name>OGBufferedTerminalOutput</name>
<state>0</state>
</option>
<option>
<name>GenStdoutInterface</name>
<state>0</state>
</option>
<option>
<name>GeneralMisraRules98</name>
<version>0</version>
<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
</option>
<option>
<name>GeneralMisraVer</name>
<state>0</state>
</option>
<option>
<name>GeneralMisraRules04</name>
<version>0</version>
<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
</option>
<option>
<name>RTConfigPath2</name>
<state />
</option>
<option>
<name>GBECoreSlave</name>
<version>25</version>
<state>1</state>
</option>
<option>
<name>OGUseCmsis</name>
<state>0</state>
</option>
<option>
<name>OGUseCmsisDspLib</name>
<state>0</state>
</option>
<option>
<name>GRuntimeLibThreads</name>
<state>0</state>
</option>
<option>
<name>CoreVariant</name>
<version>25</version>
<state>0</state>
</option>
<option>
<name>GFPUDeviceSlave</name>
<state>Default None</state>
</option>
<option>
<name>FPU2</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>NrRegs</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>NEON</name>
<state>0</state>
</option>
<option>
<name>GFPUCoreSlave2</name>
<version>25</version>
<state>0</state>
</option>
<option>
<name>OGCMSISPackSelectDevice</name>
</option>
<option>
<name>OgLibHeap</name>
<state>0</state>
</option>
<option>
<name>OGLibAdditionalLocale</name>
<state>0</state>
</option>
<option>
<name>OGPrintfVariant</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>OGPrintfMultibyteSupport</name>
<state>0</state>
</option>
<option>
<name>OGScanfVariant</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>OGScanfMultibyteSupport</name>
<state>0</state>
</option>
<option>
<name>GenLocaleTags</name>
<state />
</option>
<option>
<name>GenLocaleDisplayOnly</name>
<state />
</option>
<option>
<name>DSPExtension</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>ICCARM</name>
<archiveVersion>2</archiveVersion>
<data>
<version>34</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>CCOptimizationNoSizeConstraints</name>
<state>0</state>
</option>
<option>
<name>CCDefines</name>
<state>STM32F767xx</state>
<state>USE_HAL_DRIVER</state>
</option>
<option>
<name>CCPreprocFile</name>
<state>0</state>
</option>
<option>
<name>CCPreprocComments</name>
<state>0</state>
</option>
<option>
<name>CCPreprocLine</name>
<state>0</state>
</option>
<option>
<name>CCListCFile</name>
<state>0</state>
</option>
<option>
<name>CCListCMnemonics</name>
<state>0</state>
</option>
<option>
<name>CCListCMessages</name>
<state>0</state>
</option>
<option>
<name>CCListAssFile</name>
<state>0</state>
</option>
<option>
<name>CCListAssSource</name>
<state>0</state>
</option>
<option>
<name>CCEnableRemarks</name>
<state>0</state>
</option>
<option>
<name>CCDiagSuppress</name>
<state />
</option>
<option>
<name>CCDiagRemark</name>
<state />
</option>
<option>
<name>CCDiagWarning</name>
<state />
</option>
<option>
<name>CCDiagError</name>
<state />
</option>
<option>
<name>CCObjPrefix</name>
<state>1</state>
</option>
<option>
<name>CCAllowList</name>
<version>1</version>
<state>11111110</state>
</option>
<option>
<name>CCDebugInfo</name>
<state>0</state>
</option>
<option>
<name>IEndianMode</name>
<state>1</state>
</option>
<option>
<name>IProcessor</name>
<state>1</state>
</option>
<option>
<name>IExtraOptionsCheck</name>
<state>0</state>
</option>
<option>
<name>IExtraOptions</name>
<state />
</option>
<option>
<name>CCLangConformance</name>
<state>0</state>
</option>
<option>
<name>CCSignedPlainChar</name>
<state>1</state>
</option>
<option>
<name>CCRequirePrototypes</name>
<state>0</state>
</option>
<option>
<name>CCDiagWarnAreErr</name>
<state>0</state>
</option>
<option>
<name>CCCompilerRuntimeInfo</name>
<state>0</state>
</option>
<option>
<name>IFpuProcessor</name>
<state>1</state>
</option>
<option>
<name>OutputFile</name>
<state />
</option>
<option>
<name>CCLibConfigHeader</name>
<state>1</state>
</option>
<option>
<name>PreInclude</name>
<state />
</option>
<option>
<name>CompilerMisraOverride</name>
<state>0</state>
</option>
<option>
<name>CCIncludePath2</name>
<state />
<state>$PROJ_DIR$\..\libraries\STM32F7xx_HAL\CMSIS\Include</state>
<state>$PROJ_DIR$\..\..\..\components\finsh</state>
<state>$PROJ_DIR$\..\..\..\libcpu\arm\common</state>
<state>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m7</state>
<state>$PROJ_DIR$\board\ports</state>
<state>$PROJ_DIR$\..\..\..\components\drivers\include</state>
<state>$PROJ_DIR$\.</state>
<state>$PROJ_DIR$\applications</state>
<state>$PROJ_DIR$\..\libraries\HAL_Drivers\config</state>
<state>$PROJ_DIR$\board</state>
<state>$PROJ_DIR$\..\libraries\STM32F7xx_HAL\STM32F7xx_HAL_Driver\Inc</state>
<state>$PROJ_DIR$\board\CubeMX_Config\Inc</state>
<state>$PROJ_DIR$\..\..\..\include</state>
<state>$PROJ_DIR$\..\libraries\HAL_Drivers</state>
<state>$PROJ_DIR$\..\libraries\STM32F7xx_HAL\CMSIS\Device\ST\STM32F7xx\Include</state>
</option>
<option>
<name>CCStdIncCheck</name>
<state>0</state>
</option>
<option>
<name>CCCodeSection</name>
<state>.text</state>
</option>
<option>
<name>IProcessorMode2</name>
<state>1</state>
</option>
<option>
<name>CCOptLevel</name>
<state>3</state>
</option>
<option>
<name>CCOptStrategy</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CCOptLevelSlave</name>
<state>1</state>
</option>
<option>
<name>CompilerMisraRules98</name>
<version>0</version>
<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
</option>
<option>
<name>CompilerMisraRules04</name>
<version>0</version>
<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
</option>
<option>
<name>CCPosIndRopi</name>
<state>0</state>
</option>
<option>
<name>CCPosIndRwpi</name>
<state>0</state>
</option>
<option>
<name>CCPosIndNoDynInit</name>
<state>0</state>
</option>
<option>
<name>IccLang</name>
<state>0</state>
</option>
<option>
<name>IccCDialect</name>
<state>1</state>
</option>
<option>
<name>IccAllowVLA</name>
<state>0</state>
</option>
<option>
<name>IccStaticDestr</name>
<state>1</state>
</option>
<option>
<name>IccCppInlineSemantics</name>
<state>0</state>
</option>
<option>
<name>IccCmsis</name>
<state>1</state>
</option>
<option>
<name>IccFloatSemantics</name>
<state>0</state>
</option>
<option>
<name>CCNoLiteralPool</name>
<state>0</state>
</option>
<option>
<name>CCOptStrategySlave</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CCGuardCalls</name>
<state>1</state>
</option>
<option>
<name>CCEncSource</name>
<state>0</state>
</option>
<option>
<name>CCEncOutput</name>
<state>0</state>
</option>
<option>
<name>CCEncOutputBom</name>
<state>1</state>
</option>
<option>
<name>CCEncInput</name>
<state>0</state>
</option>
<option>
<name>IccExceptions2</name>
<state>0</state>
</option>
<option>
<name>IccRTTI2</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>AARM</name>
<archiveVersion>2</archiveVersion>
<data>
<version>10</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>AObjPrefix</name>
<state>1</state>
</option>
<option>
<name>AEndian</name>
<state>1</state>
</option>
<option>
<name>ACaseSensitivity</name>
<state>1</state>
</option>
<option>
<name>MacroChars</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>AWarnEnable</name>
<state>0</state>
</option>
<option>
<name>AWarnWhat</name>
<state>0</state>
</option>
<option>
<name>AWarnOne</name>
<state />
</option>
<option>
<name>AWarnRange1</name>
<state />
</option>
<option>
<name>AWarnRange2</name>
<state />
</option>
<option>
<name>ADebug</name>
<state>0</state>
</option>
<option>
<name>AltRegisterNames</name>
<state>0</state>
</option>
<option>
<name>ADefines</name>
<state />
</option>
<option>
<name>AList</name>
<state>0</state>
</option>
<option>
<name>AListHeader</name>
<state>1</state>
</option>
<option>
<name>AListing</name>
<state>1</state>
</option>
<option>
<name>Includes</name>
<state>0</state>
</option>
<option>
<name>MacDefs</name>
<state>0</state>
</option>
<option>
<name>MacExps</name>
<state>1</state>
</option>
<option>
<name>MacExec</name>
<state>0</state>
</option>
<option>
<name>OnlyAssed</name>
<state>0</state>
</option>
<option>
<name>MultiLine</name>
<state>0</state>
</option>
<option>
<name>PageLengthCheck</name>
<state>0</state>
</option>
<option>
<name>PageLength</name>
<state>80</state>
</option>
<option>
<name>TabSpacing</name>
<state>8</state>
</option>
<option>
<name>AXRef</name>
<state>0</state>
</option>
<option>
<name>AXRefDefines</name>
<state>0</state>
</option>
<option>
<name>AXRefInternal</name>
<state>0</state>
</option>
<option>
<name>AXRefDual</name>
<state>0</state>
</option>
<option>
<name>AProcessor</name>
<state>1</state>
</option>
<option>
<name>AFpuProcessor</name>
<state>1</state>
</option>
<option>
<name>AOutputFile</name>
<state />
</option>
<option>
<name>ALimitErrorsCheck</name>
<state>0</state>
</option>
<option>
<name>ALimitErrorsEdit</name>
<state>100</state>
</option>
<option>
<name>AIgnoreStdInclude</name>
<state>0</state>
</option>
<option>
<name>AUserIncludes</name>
<state />
</option>
<option>
<name>AExtraOptionsCheckV2</name>
<state>0</state>
</option>
<option>
<name>AExtraOptionsV2</name>
<state />
</option>
<option>
<name>AsmNoLiteralPool</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>OBJCOPY</name>
<archiveVersion>0</archiveVersion>
<data>
<version>1</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>OOCOutputFormat</name>
<version>3</version>
<state>0</state>
</option>
<option>
<name>OCOutputOverride</name>
<state>0</state>
</option>
<option>
<name>OOCOutputFile</name>
<state />
</option>
<option>
<name>OOCCommandLineProducer</name>
<state>1</state>
</option>
<option>
<name>OOCObjCopyEnable</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>CUSTOM</name>
<archiveVersion>3</archiveVersion>
<data>
<extensions />
<cmdline />
<hasPrio>0</hasPrio>
</data>
</settings>
<settings>
<name>BICOMP</name>
<archiveVersion>0</archiveVersion>
<data />
</settings>
<settings>
<name>BUILDACTION</name>
<archiveVersion>1</archiveVersion>
<data>
<prebuild />
<postbuild />
</data>
</settings>
<settings>
<name>ILINK</name>
<archiveVersion>0</archiveVersion>
<data>
<version>20</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>IlinkLibIOConfig</name>
<state>1</state>
</option>
<option>
<name>XLinkMisraHandler</name>
<state>0</state>
</option>
<option>
<name>IlinkInputFileSlave</name>
<state>0</state>
</option>
<option>
<name>IlinkOutputFile</name>
<state>###Unitialized###</state>
</option>
<option>
<name>IlinkDebugInfoEnable</name>
<state>1</state>
</option>
<option>
<name>IlinkKeepSymbols</name>
<state />
</option>
<option>
<name>IlinkRawBinaryFile</name>
<state />
</option>
<option>
<name>IlinkRawBinarySymbol</name>
<state />
</option>
<option>
<name>IlinkRawBinarySegment</name>
<state />
</option>
<option>
<name>IlinkRawBinaryAlign</name>
<state />
</option>
<option>
<name>IlinkDefines</name>
<state />
</option>
<option>
<name>IlinkConfigDefines</name>
<state />
</option>
<option>
<name>IlinkMapFile</name>
<state>0</state>
</option>
<option>
<name>IlinkLogFile</name>
<state>0</state>
</option>
<option>
<name>IlinkLogInitialization</name>
<state>0</state>
</option>
<option>
<name>IlinkLogModule</name>
<state>0</state>
</option>
<option>
<name>IlinkLogSection</name>
<state>0</state>
</option>
<option>
<name>IlinkLogVeneer</name>
<state>0</state>
</option>
<option>
<name>IlinkIcfOverride</name>
<state>0</state>
</option>
<option>
<name>IlinkIcfFile</name>
<state>lnk0t.icf</state>
</option>
<option>
<name>IlinkIcfFileSlave</name>
<state />
</option>
<option>
<name>IlinkEnableRemarks</name>
<state>0</state>
</option>
<option>
<name>IlinkSuppressDiags</name>
<state />
</option>
<option>
<name>IlinkTreatAsRem</name>
<state />
</option>
<option>
<name>IlinkTreatAsWarn</name>
<state />
</option>
<option>
<name>IlinkTreatAsErr</name>
<state />
</option>
<option>
<name>IlinkWarningsAreErrors</name>
<state>0</state>
</option>
<option>
<name>IlinkUseExtraOptions</name>
<state>0</state>
</option>
<option>
<name>IlinkExtraOptions</name>
<state />
</option>
<option>
<name>IlinkLowLevelInterfaceSlave</name>
<state>1</state>
</option>
<option>
<name>IlinkAutoLibEnable</name>
<state>1</state>
</option>
<option>
<name>IlinkAdditionalLibs</name>
<state />
</option>
<option>
<name>IlinkOverrideProgramEntryLabel</name>
<state>0</state>
</option>
<option>
<name>IlinkProgramEntryLabelSelect</name>
<state>0</state>
</option>
<option>
<name>IlinkProgramEntryLabel</name>
<state />
</option>
<option>
<name>DoFill</name>
<state>0</state>
</option>
<option>
<name>FillerByte</name>
<state>0xFF</state>
</option>
<option>
<name>FillerStart</name>
<state>0x0</state>
</option>
<option>
<name>FillerEnd</name>
<state>0x0</state>
</option>
<option>
<name>CrcSize</name>
<version>0</version>
<state>1</state>
</option>
<option>
<name>CrcAlign</name>
<state>1</state>
</option>
<option>
<name>CrcPoly</name>
<state>0x11021</state>
</option>
<option>
<name>CrcCompl</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CrcBitOrder</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CrcInitialValue</name>
<state>0x0</state>
</option>
<option>
<name>DoCrc</name>
<state>0</state>
</option>
<option>
<name>IlinkBE8Slave</name>
<state>1</state>
</option>
<option>
<name>IlinkBufferedTerminalOutput</name>
<state>1</state>
</option>
<option>
<name>IlinkStdoutInterfaceSlave</name>
<state>1</state>
</option>
<option>
<name>CrcFullSize</name>
<state>0</state>
</option>
<option>
<name>IlinkIElfToolPostProcess</name>
<state>0</state>
</option>
<option>
<name>IlinkLogAutoLibSelect</name>
<state>0</state>
</option>
<option>
<name>IlinkLogRedirSymbols</name>
<state>0</state>
</option>
<option>
<name>IlinkLogUnusedFragments</name>
<state>0</state>
</option>
<option>
<name>IlinkCrcReverseByteOrder</name>
<state>0</state>
</option>
<option>
<name>IlinkCrcUseAsInput</name>
<state>1</state>
</option>
<option>
<name>IlinkOptInline</name>
<state>1</state>
</option>
<option>
<name>IlinkOptExceptionsAllow</name>
<state>1</state>
</option>
<option>
<name>IlinkOptExceptionsForce</name>
<state>0</state>
</option>
<option>
<name>IlinkCmsis</name>
<state>1</state>
</option>
<option>
<name>IlinkOptMergeDuplSections</name>
<state>0</state>
</option>
<option>
<name>IlinkOptUseVfe</name>
<state>1</state>
</option>
<option>
<name>IlinkOptForceVfe</name>
<state>0</state>
</option>
<option>
<name>IlinkStackAnalysisEnable</name>
<state>0</state>
</option>
<option>
<name>IlinkStackControlFile</name>
<state />
</option>
<option>
<name>IlinkStackCallGraphFile</name>
<state />
</option>
<option>
<name>CrcAlgorithm</name>
<version>1</version>
<state>1</state>
</option>
<option>
<name>CrcUnitSize</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>IlinkThreadsSlave</name>
<state>1</state>
</option>
<option>
<name>IlinkLogCallGraph</name>
<state>0</state>
</option>
<option>
<name>IlinkIcfFile_AltDefault</name>
<state />
</option>
<option>
<name>IlinkEncInput</name>
<state>0</state>
</option>
<option>
<name>IlinkEncOutput</name>
<state>0</state>
</option>
<option>
<name>IlinkEncOutputBom</name>
<state>1</state>
</option>
<option>
<name>IlinkHeapSelect</name>
<state>1</state>
</option>
<option>
<name>IlinkLocaleSelect</name>
<state>1</state>
</option>
</data>
</settings>
<settings>
<name>IARCHIVE</name>
<archiveVersion>0</archiveVersion>
<data>
<version>0</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>IarchiveInputs</name>
<state />
</option>
<option>
<name>IarchiveOverride</name>
<state>0</state>
</option>
<option>
<name>IarchiveOutput</name>
<state>###Unitialized###</state>
</option>
</data>
</settings>
<settings>
<name>BILINK</name>
<archiveVersion>0</archiveVersion>
<data />
</settings>
</configuration>
<group>
<name>Applications</name>
<file>
<name>$PROJ_DIR$\applications\main.c</name>
</file>
</group>
<group>
<name>Drivers</name>
<file>
<name>$PROJ_DIR$\board\board.c</name>
</file>
<file>
<name>$PROJ_DIR$\board\CubeMX_Config\Src\stm32f7xx_hal_msp.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F7xx_HAL\CMSIS\Device\ST\STM32F7xx\Source\Templates\iar\startup_stm32f767xx.s</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\HAL_Drivers\drv_gpio.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\HAL_Drivers\drv_usart.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\HAL_Drivers\drv_common.c</name>
</file>
</group>
<group>
<name>Kernel</name>
<file>
<name>$PROJ_DIR$\..\..\..\src\clock.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\components.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\cpu.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\device.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\idle.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\ipc.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\irq.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\kservice.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\memheap.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\mempool.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\object.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\scheduler.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\signal.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\thread.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\timer.c</name>
</file>
</group>
<group>
<name>CORTEX-M7</name>
<file>
<name>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m7\cpuport.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m7\context_iar.S</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\libcpu\arm\common\backtrace.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\libcpu\arm\common\div0.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\libcpu\arm\common\showmem.c</name>
</file>
</group>
<group>
<name>DeviceDrivers</name>
<file>
<name>$PROJ_DIR$\..\..\..\components\drivers\misc\pin.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\drivers\serial\serial.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\drivers\src\completion.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\drivers\src\dataqueue.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\drivers\src\pipe.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\drivers\src\ringblk_buf.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\drivers\src\ringbuffer.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\drivers\src\waitqueue.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\drivers\src\workqueue.c</name>
</file>
</group>
<group>
<name>finsh</name>
<file>
<name>$PROJ_DIR$\..\..\..\components\finsh\shell.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\finsh\symbol.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\finsh\cmd.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\finsh\msh.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\finsh\msh_cmd.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\finsh\msh_file.c</name>
</file>
</group>
<group>
<name>STM32_HAL</name>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F7xx_HAL\CMSIS\Device\ST\STM32F7xx\Source\Templates\system_stm32f7xx.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F7xx_HAL\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F7xx_HAL\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_cec.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F7xx_HAL\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_cortex.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F7xx_HAL\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_crc.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F7xx_HAL\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_cryp.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F7xx_HAL\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_cryp_ex.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F7xx_HAL\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_dma.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F7xx_HAL\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_dma_ex.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F7xx_HAL\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_pwr.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F7xx_HAL\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_pwr_ex.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F7xx_HAL\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_rcc.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F7xx_HAL\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_rcc_ex.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F7xx_HAL\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_rng.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F7xx_HAL\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_sram.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F7xx_HAL\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_gpio.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F7xx_HAL\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_uart.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32F7xx_HAL\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_usart.c</name>
</file>
</group>
</project>
bsp/stm32/stm32f767-fire-challenger/project.eww
浏览文件 @ 5321d2fb
<?xml version="1.0" encoding="iso-8859-1"?>
<workspace>
<project>
<path>$WS_DIR$\project.ewp</path>
</project>
<batchBuild/>
</workspace>
<?xml version="1.0" encoding="iso-8859-1"?>
<workspace>
<project>
<path>$WS_DIR$\project.ewp</path>
</project>
<batchBuild/>
</workspace>
bsp/stm32/stm32f767-fire-challenger/rtconfig.py
浏览文件 @ 5321d2fb
......@@ -36,6 +36,7 @@ if PLATFORM == 'gcc':
CC = PREFIX + 'gcc'
AS = PREFIX + 'gcc'
AR = PREFIX + 'ar'
CXX = PREFIX + 'g++'
LINK = PREFIX + 'gcc'
TARGET_EXT = 'elf'
SIZE = PREFIX + 'size'
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或