# Copyright (c) 2020 PaddlePaddle Authors. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. import warnings import paddle from ...fluid.framework import in_dygraph_mode, default_main_program from paddle.fluid.layer_helper import LayerHelper from paddle.fluid.layers.tensor import Variable, fill_constant, zeros, concat # TODO: define the common functions to build a neural network from ...fluid.layers import label_smooth #DEFINE_ALIAS from ...fluid import one_hot #DEFINE_ALIAS from ...fluid.layers import pad2d #DEFINE_ALIAS from ...fluid.layers import unfold #DEFINE_ALIAS from ...fluid.layers import assign #DEFINE_ALIAS from ...fluid.layers import squeeze #DEFINE_ALIAS from ...fluid.layers import unsqueeze #DEFINE_ALIAS from ...fluid.layers import elementwise_mul #DEFINE_ALIAS from ...tensor import clip from ...tensor import sum from ...tensor import sqrt #from ...fluid.layers import fc #DEFINE_ALIAS from ...fluid.layers import pad_constant_like #DEFINE_ALIAS from ...fluid.framework import in_dygraph_mode from ...fluid import core, dygraph_utils from ...fluid import core, layers from ...fluid.data_feeder import check_variable_and_dtype __all__ = [ 'dropout', 'dropout2d', 'dropout3d', 'alpha_dropout', # 'embedding', # 'fc', 'label_smooth', 'one_hot', 'pad', 'pad_constant_like', 'pad2d', 'unfold', # 'bilinear_tensor_product', 'assign', 'interpolate', 'bilinear', 'cosine_similarity', ] def interpolate(input, size=None, scale_factor=None, mode='nearest', align_corners=False, align_mode=1, data_format='NCHW', name=None): """ :alias_main: paddle.nn.functional.interpolate :alias: paddle.nn.functional.interpolate,paddle.nn.functional.common.interpolate This op resizes a batch of images. The input must be a 3-D Tensor of the shape (num_batches, channels, in_w) or 4-D (num_batches, channels, in_h, in_w), or a 5-D Tensor of the shape (num_batches, channels, in_d, in_h, in_w) or (num_batches, in_d, in_h, in_w, channels), and the resizing only applies on the three dimensions(depth, height and width). **Warning:** the parameter :attr:`actual_shape` will be deprecated in the future and only use :attr:`out_shape` instead. Supporting resample methods: 'linear' : Linear interpolation 'bilinear' : Bilinear interpolation 'trilinear' : Trilinear interpolation 'nearest' : Nearest neighbor interpolation 'bicubic' : Bicubic interpolation Linear interpolation is the method of using a line connecting two known quantities to determine the value of an unknown quantity between the two known quantities. Nearest neighbor interpolation is to perform nearest neighbor interpolation in both the 3rd dimension(in height direction) and the 4th dimension(in width direction) on input tensor. Bilinear interpolation is an extension of linear interpolation for interpolating functions of two variables (e.g. H-direction and W-direction in this op) on a rectilinear 2D grid. The key idea is to perform linear interpolation first in one direction, and then again in the other direction. Trilinear interpolation is an extension of linear interpolation for interpolating functions of three variables (e.g. D-direction, H-direction and W-direction in this op) on a rectilinear 3D grid. The linear interpolation is performed on three directions. Align_corners and align_mode are optional parameters,the calculation method of interpolation can be selected by them. Bicubic interpolation is an extension of cubic interpolation for interpolating data points on a two-dimensional regular grid. The interpolated surface is smoother than corresponding surfaces obtained by bilinear interpolation or nearest-neighbor interpolation. Example: .. code-block:: text For scale_factor: if align_corners = True && out_size > 1 : scale_factor = (in_size-1.0)/(out_size-1.0) else: scale_factor = float(in_size/out_size) Linear interpolation: if: align_corners = False , align_mode = 0 input : (N,C,W_in) output: (N,C,W_out) where: W_out = (W_{in}+0.5) * scale_{factor} - 0.5 else: input : (N,C,W_in) output: (N,C,W_out) where: W_out = W_{in} * scale_{factor} Nearest neighbor interpolation: if: align_corners = False input : (N,C,H_in,W_in) output: (N,C,H_out,W_out) where: H_out = floor (H_{in} * scale_{factor}) W_out = floor (W_{in} * scale_{factor}) else: align_corners = True input : (N,C,H_in,W_in) output: (N,C,H_out,W_out) where: H_out = round(H_{in} * scale_{factor}) W_out = round(W_{in} * scale_{factor}) Bilinear interpolation: if: align_corners = False , align_mode = 0 input : (N,C,H_in,W_in) output: (N,C,H_out,W_out) where: H_out = (H_{in}+0.5) * scale_{factor} - 0.5 W_out = (W_{in}+0.5) * scale_{factor} - 0.5 else: input : (N,C,H_in,W_in) output: (N,C,H_out,W_out) where: H_out = H_{in} * scale_{factor} W_out = W_{in} * scale_{factor} Bicubic interpolation: if: align_corners = False input : (N,C,H_in,W_in) output: (N,C,H_out,W_out) where: H_out = (H_{in}+0.5) * scale_{factor} - 0.5 W_out = (W_{in}+0.5) * scale_{factor} - 0.5 else: input : (N,C,H_in,W_in) output: (N,C,H_out,W_out) where: H_out = H_{in} * scale_{factor} W_out = W_{in} * scale_{factor} Trilinear interpolation: if: align_corners = False , align_mode = 0 input : (N,C,D_in,H_in,W_in) output: (N,C,D_out,H_out,W_out) where: D_out = (D_{in}+0.5) * scale_{factor} - 0.5 H_out = (H_{in}+0.5) * scale_{factor} - 0.5 W_out = (W_{in}+0.5) * scale_{factor} - 0.5 else: input : (N,C,D_in,H_in,W_in) output: (N,C,D_out,H_out,W_out) where: D_out = D_{in} * scale_{factor} H_out = H_{in} * scale_{factor} W_out = W_{in} * scale_{factor} For details of linear interpolation, please refer to Wikipedia: https://en.wikipedia.org/wiki/Linear_interpolation. For details of nearest neighbor interpolation, please refer to Wikipedia: https://en.wikipedia.org/wiki/Nearest-neighbor_interpolation. For details of bilinear interpolation, please refer to Wikipedia: https://en.wikipedia.org/wiki/Bilinear_interpolation. For details of trilinear interpolation, please refer to Wikipedia: https://en.wikipedia.org/wiki/Trilinear_interpolation. For details of bicubic interpolation, please refer to Wikipedia: https://en.wikipedia.org/wiki/Bicubic_interpolation Parameters: input (Variable): 3-D, 4-D or 5-D Tensor, its data type is float32, float64, or uint8, its data format is specified by :attr:`data_format`. size (list|tuple|Variable|None): Output shape of image resize layer, the shape is (out_w, ) when input is a 3-D Tensor, the shape is (out_h, out_w) when input is a 4-D Tensor and is (out_d, out_h, out_w) when input is a 5-D Tensor. Default: None. If a list, each element can be an integer or a Tensor Variable of shape: [1]. If a Tensor Variable, its dimensions size should be a 1. scale_factor (float|Variable|None): The multiplier for the input height or width. At least one of :attr:`out_shape` or :attr:`scale_factor` must be set. And :attr:`out_shape` has a higher priority than :attr:`scale_factor`. Default: None. mode (str): The resample method. It supports 'linear', 'nearest', 'bilinear', 'bicubic' and 'trilinear' currently. Default: 'nearest' align_corners(bool) : An optional bool, If True, the centers of the 4 corner pixels of the input and output tensors are aligned, preserving the values at the corner pixels. Default: False align_mode(int) : An optional for linear/bilinear/trilinear interpolation. Refer to the formula in the example above, it can be \'0\' for src_idx = scale_factor*(dst_indx+0.5)-0.5 , can be \'1\' for src_idx = scale_factor*dst_index. data_format (str, optional): Specify the data format of the input, and the data format of the output will be consistent with that of the input. An optional string from:`NCW`, `NWC`, `"NCHW"`, `"NHWC"`, `"NCDHW"`, `"NDHWC"`. The default is `"NCHW"`. When it is `"NCHW"`, the data is stored in the order of: `[batch_size, input_channels, input_height, input_width]`. When it is `"NCHW"`, the data is stored in the order of: `[batch_size, input_channels, input_depth, input_height, input_width]`. name(str, optional): The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name` Returns: A 3-D Tensor of the shape (num_batches, channels, out_w) or (num_batches, out_w, channels), A 4-D Tensor of the shape (num_batches, channels, out_h, out_w) or (num_batches, out_h, out_w, channels), or 5-D Tensor of the shape (num_batches, channels, out_d, out_h, out_w) or (num_batches, out_d, out_h, out_w, channels). Raises: TypeError: size should be a list or tuple or Variable. ValueError: The 'mode' of image_resize can only be 'linear', 'bilinear', 'trilinear', 'bicubic', or 'nearest' currently. ValueError: 'linear' only support 3-D tensor. ValueError: 'bilinear', 'bicubic' and 'nearest' only support 4-D tensor. ValueError: 'trilinear' only support 5-D tensor. ValueError: One of size and scale_factor must not be None. ValueError: size length should be 1 for input 3-D tensor. ValueError: size length should be 2 for input 4-D tensor. ValueError: size length should be 3 for input 5-D tensor. ValueError: scale_factor should be greater than zero. TypeError: align_corners should be a bool value ValueError: align_mode can only be '0' or '1' ValueError: data_format can only be 'NCW', 'NWC', 'NCHW', 'NHWC', 'NCDHW' or 'NDHWC'. Examples: .. code-block:: python #declarative mode import paddle import numpy as np input = fluid.data(name="input", shape=[None,3,6,10]) #1 output = paddle.nn.functional.interpolate(input=input, size=[12,12]) #2 #x = np.array([2]).astype("int32") #dim1 = fluid.data(name="dim1", shape=[1], dtype="int32") #fluid.layers.assign(input=x, output=dim1) #output = paddle.nn.functional.interpolate(input=input, size=[12,dim1]) #3 #x = np.array([3,12]).astype("int32") #shape_tensor = fluid.data(name="shape_tensor", shape=[2], dtype="int32") #fluid.layers.assign(input=x, output=shape_tensor) #output = paddle.nn.functional.interpolate(input=input, size=shape_tensor) #4 #x = np.array([0.5]).astype("float32") #scale_tensor = fluid.data(name="scale", shape=[1], dtype="float32") #fluid.layers.assign(x,scale_tensor) #output = paddle.nn.functional.interpolate(input=input, scale_factor=scale_tensor) place = fluid.CPUPlace() exe = fluid.Executor(place) exe.run(fluid.default_startup_program()) input_data = np.random.rand(2,3,6,10).astype("float32") output_data = exe.run(fluid.default_main_program(), feed={"input":input_data}, fetch_list=[output], return_numpy=True) print(output_data[0].shape) #1 # (2, 3, 12, 12) #2 # (2, 3, 12, 2) #3 # (2, 3, 3, 12) #4 # (2, 3, 3, 5) #imperative mode import paddle.fluid.dygraph as dg with dg.guard(place) as g: input = dg.to_variable(input_data) output = paddle.nn.functional.interpolate(input=input, size=[12,12]) print(output.shape) # [2L, 3L, 12L, 12L] """ data_format = data_format.upper() resample = mode.upper() resample_type = mode.lower() resample_methods = [ 'LINEAR', 'BILINEAR', 'TRILINEAR', 'NEAREST', 'BICUBIC', ] if resample not in resample_methods: raise ValueError( "The 'resample' of image_resize can only be 'linaer', 'bilinear', 'trilinear', " " 'bicubic' or 'nearest' currently.") if resample in ['LINEAR'] and len(input.shape) != 3: raise ValueError("'linear' only support 3-D tensor.") if resample in ['BILINEAR', 'NEAREST', 'BICUBIC'] and len(input.shape) != 4: raise ValueError( "'bilinear', 'bicubic' and 'nearest' only support 4-D tensor.") if resample == 'TRILINEAR' and len(input.shape) != 5: raise ValueError("'trilinear'only support 5-D tensor.") if size is None and scale_factor is None: raise ValueError("One of size and scale_factor must not be None.") if not isinstance(align_corners, bool): raise TypeError("Attr align_corners should be a bool value") if align_mode != 0 and align_mode != 1: raise ValueError("align_mode can only be 0 or 1") helper = LayerHelper('{}_interp'.format(resample_type), **locals()) dtype = helper.input_dtype() if len(input.shape) == 3 and data_format not in ['NCW', 'NWC']: raise ValueError( "Got wrong value for param `data_format`: " + data_format + " received but only `NCW` or `NWC` supported for 3-D input.") elif len(input.shape) == 4 and data_format not in ['NCHW', 'NHWC']: raise ValueError( "Got wrong value for param `data_format`: " + data_format + " received but only `NCHW` or `NHWC` supported for 4-D input.") elif len(input.shape) == 5 and data_format not in ['NCDHW', 'NDHWC']: raise ValueError( "Got wrong value for param `data_format`: " + data_format + " received but only `NCDHW` or `NDHWC` supported for 5-D input.") def _is_list_or_turple_(data): return (isinstance(data, list) or isinstance(data, tuple)) if data_format == 'NCHW' or data_format == 'NCDHW' or data_format == 'NCW': data_layout = 'NCHW' if data_format == 'NHWC' or data_format == 'NDHWC' or data_format == 'NWC': data_layout = 'NHWC' inputs = {"X": input} attrs = { "out_d": -1, "out_h": -1, "out_w": -1, "interp_method": resample_type, "align_corners": align_corners, "align_mode": align_mode, "data_layout": data_layout } out_shape = size scale = scale_factor if out_shape is not None: if isinstance(out_shape, Variable): out_shape.stop_gradient = True inputs['OutSize'] = out_shape else: if not (_is_list_or_turple_(out_shape)): raise TypeError( "out_shape should be a list or tuple or Variable.") # Validate the shape contain_var = False for dim_idx, dim_size in enumerate(out_shape): if isinstance(dim_size, Variable): contain_var = True continue assert dim_size > 0, ( "Each dimension size given in out_shape must be greater than 0." ) if contain_var: new_size_tensor = [] size_list = [] for dim in out_shape: if isinstance(dim, Variable): dim.stop_gradient = True new_size_tensor.append(dim) size_list.append(-1) else: assert (isinstance(dim, int)) temp_out = helper.create_variable_for_type_inference( 'int32') fill_constant( [1], 'int32', dim, force_cpu=True, out=temp_out) new_size_tensor.append(temp_out) size_list.append(dim) inputs['SizeTensor'] = new_size_tensor if len(input.shape) == 3: if len(out_shape) != 1: raise ValueError( "out_shape length should be 2 for input 3-D tensor") if contain_var: attrs['out_w'] = size_list[0] else: out_shape = list(map(int, out_shape)) attrs['out_w'] = out_shape[0] if len(input.shape) == 4: if len(out_shape) != 2: raise ValueError("out_shape length should be 2 for " "input 4-D tensor.") if contain_var: attrs['out_h'] = size_list[0] attrs['out_w'] = size_list[1] else: out_shape = list(map(int, out_shape)) attrs['out_h'] = out_shape[0] attrs['out_w'] = out_shape[1] if len(input.shape) == 5: if len(out_shape) != 3: raise ValueError("out_shape length should be 3 for " "input 5-D tensor.") if contain_var: attrs['out_d'] = size_list[0] attrs['out_h'] = size_list[1] attrs['out_w'] = size_list[2] else: out_shape = list(map(int, out_shape)) attrs['out_d'] = out_shape[0] attrs['out_h'] = out_shape[1] attrs['out_w'] = out_shape[2] else: if isinstance(scale, Variable): scale.stop_gradient = True inputs["Scale"] = scale elif isinstance(scale, float) or isinstance(scale, int): if scale <= 0: raise ValueError("Attr(scale) should be greater than zero.") attrs['scale'] = float(scale) else: raise TypeError( "Attr(scale)'s type should be float, int or Variable.") out = helper.create_variable_for_type_inference(dtype) helper.append_op( type='{}_interp'.format(resample_type), inputs=inputs, outputs={"Out": out}, attrs=attrs) return out def bilinear(x1, x2, weight, bias=None, name=None): """ This layer performs bilinear on two inputs. .. math:: out_{i} = x1 * W_{i} * {x2^\mathrm{T}}, i=0,1,...,size-1 out = out + b In this formula: - :math:`x1`: the first input contains in1_features elements, shape is [batch_size, in1_features]. - :math:`x2`: the second input contains in2_features elements, shape is [batch_size, in2_features]. - :math:`W_{i}`: the i-th learned weight, shape is [in1_features, in2_features], and learned weight's shape is [out_features, in1_features, in2_features]. - :math:`out_{i}`: the i-th element of out, shape is [batch_size, out_features]. - :math:`b`: the learned bias, shape is [1, out_features]. - :math:`x2^\mathrm{T}`: the transpose of :math:`x2`. Parameters: x1 (Tensor): the first input tensor, it's data type should be float32, float64. x2 (Tensor): the second input tensor, it's data type should be float32, float64. weight (Parameter): The learnable weights of this layer, shape is [out_features, in1_features, in2_features]. bias (Parameter, optional): The learnable bias(Bias) of this layer, shape is [1, out_features]. If it is set to None, no bias will be added to the output units. The default value is None. name (str, optional): The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name`. Default: None. Returns: Variable: A 2-D Tensor of shape [batch_size, out_features]. Examples: .. code-block:: python import paddle import numpy import paddle.nn.functional as F paddle.disable_static() x1 = numpy.random.random((5, 5)).astype('float32') x2 = numpy.random.random((5, 4)).astype('float32') w = numpy.random.random((1000, 5, 4)).astype('float32') b = numpy.random.random((1, 1000)).astype('float32') result = F.bilinear(paddle.to_tensor(x1), paddle.to_tensor(x2), paddle.to_tensor(w), paddle.to_tensor(b)) # result shape [5, 1000] """ if in_dygraph_mode(): return core.ops.bilinear_tensor_product(x1, x2, weight, bias) check_variable_and_dtype(x1, 'x1', ['float32', 'float64'], 'bilinear') check_variable_and_dtype(x2, 'x2', ['float32', 'float64'], 'bilinear') inputs = {"X": x1, "Y": x2, "Weight": weight} if bias is not None: inputs["Bias"] = bias helper = LayerHelper("bilinear", **locals()) out = helper.create_variable_for_type_inference(dtype=x1.dtype) helper.append_op( type="bilinear_tensor_product", inputs=inputs, outputs={"Out": out}) return out def dropout(x, p=0.5, axis=None, training=True, mode="upscale_in_train", name=None): """ Dropout is a regularization technique for reducing overfitting by preventing neuron co-adaption during training. The dropout operator randomly sets the outputs of some units to zero, while upscale others according to the given dropout probability. Args: x (Tensor): The input tensor. The data type is float32 or float64. p (float | int): Probability of setting units to zero. Default 0.5. axis (int | list): The axis along which the dropout is performed. Default None. training (bool): A flag indicating whether it is in train phrase or not. Default True. mode(str): ['upscale_in_train'(default) | 'downscale_in_infer'] 1. upscale_in_train(default), upscale the output at training time - train: out = input * mask / ( 1.0 - dropout_prob ) - inference: out = input 2. downscale_in_infer, downscale the output at inference - train: out = input * mask - inference: out = input * (1.0 - dropout_prob) name (str, optional): Name for the operation (optional, default is None). For more information, please refer to :ref:`api_guide_Name`. Returns: A Tensor representing the dropout, has same shape and data type as `x` . Examples: We use ``p=0.5`` in the following description for simplicity. 1. When ``axis=None`` , this is commonly used dropout, which dropout each element of x randomly. Let's see a simple case when x is a 2d tensor with shape 2*3: [[1 2 3] [4 5 6]] we generate mask with the same shape as x, which is 2*3. The value of mask is sampled from a Bernoulli distribution randomly. For example, we may get such mask: [[0 1 0] [1 0 1]] So the output is obtained from elementwise multiply of x and mask: [[0 2 0] [4 0 6]] Using default setting, i.e. ``mode='upscale_in_train'`` , if in training phase, the final upscale output is: [[0 4 0 ] [8 0 12]] if in test phase, the output is the same as input: [[1 2 3] [4 5 6]] we can also set ``mode='downscale_in_infer'`` , then if in training phase, the final output is: [[0 2 0] [4 0 6]] if in test phase, the scale output is: [[0.5 1. 1.5] [2. 2.5 3. ]] 2. When ``axis!=None`` , this is useful for dropping whole channels from an image or sequence. Let's see the simple case when x is a 2d tensor with shape 2*3 again: [[1 2 3] [4 5 6]] (1) If ``axis=0`` , this means the dropout is only performed in axis `0` . we generate mask with the shape 2*1. Only in axis `0` the value is randomly selected. For example, we may get such mask: [[1] [0]] The output is obtained from elementwise multiply of x and mask. Doing that the mask will be broadcast from 2*1 to 2*3: [[1 1 1] [0 0 0]] and the result after elementwise multiply is: [[1 2 3] [0 0 0]] then we can do upscale or downscale according to the setting of other arguments. (2) If ``axis=1`` , this means the dropout is only performed in axis `1` . we generate mask with the shape 1*3. Only in axis `1` the value is randomly selected. For example, we may get such mask: [[1 0 1]] Doing elementwise multiply the mask will be broadcast from 1*3 to 2*3: [[1 0 1] [1 0 1]] and the result after elementwise multiply is: [[1 0 3] [4 0 6]] (3) What about ``axis=[0, 1]`` ? This means the dropout is performed in all axes of x, which is the same case as default setting ``axis=None`` . (4) You may note that logically `axis=None` means the dropout is performed in none axis of x, We generate mask with the shape 1*1. Whole input is randomly selected or dropped. For example, we may get such mask: [[0]] Doing elementwise multiply the mask will be broadcast from 1*1 to 2*3: [[0 0 0] [0 0 0]] and the result after elementwise multiply is: [[0 0 0] [0 0 0]] Actually this is not what we want because all elements may set to zero~ When x is a 4d tensor with shape `NCHW`, we can set ``axis=[0,1]`` and the dropout will be performed in channel `N` and `C`, `H` and `W` is tied, i.e. paddle.nn.dropout(x, p, axis=[0,1]) Please refer to ``paddle.nn.functional.dropout2d`` for more details. Similarly, when x is a 5d tensor with shape `NCDHW`, we can set ``axis=[0,1]`` to perform dropout3d. Please refer to ``paddle.nn.functional.dropout3d`` for more details. .. code-block:: python import paddle import numpy as np paddle.disable_static() x = np.array([[1,2,3], [4,5,6]]).astype('float32') x = paddle.to_tensor(x) y_train = paddle.nn.functional.dropout(x, 0.5) y_test = paddle.nn.functional.dropout(x, 0.5, training=False) y_0 = paddle.nn.functional.dropout(x, axis=0) y_1 = paddle.nn.functional.dropout(x, axis=1) y_01 = paddle.nn.functional.dropout(x, axis=[0,1]) print(x.numpy()) print(y_train.numpy()) print(y_test.numpy()) print(y_0.numpy()) print(y_1.numpy()) print(y_01.numpy()) """ if not isinstance(p, (float, int)): raise TypeError("p argument should be a number") if p < 0 or p > 1: raise ValueError("p argument should between 0 and 1") if mode not in ('downscale_in_infer', 'upscale_in_train'): raise ValueError( "mode argument should be 'downscale_in_infer' or 'upscale_in_train'") if axis and not isinstance(axis, (int, list)): raise TypeError("datatype of axis argument should be int or list") if axis == None: # commonly used dropout seed = None mode = 'downgrade_in_infer' if mode == 'downscale_in_infer' else mode #semantic transfer def get_attrs(prog, dropout_prob, is_test, seed): if (seed is None or seed == 0) and prog.random_seed != 0: seed = prog.random_seed attrs = { 'dropout_prob': dropout_prob, 'is_test': is_test, 'fix_seed': seed is not None, 'seed': seed if seed is not None else 0, 'dropout_implementation': mode, } return attrs if in_dygraph_mode(): if default_main_program().random_seed != 0: seed = default_main_program().random_seed out, mask = core.ops.dropout( x, 'dropout_prob', p, 'is_test', not training, 'fix_seed', seed is not None, 'seed', seed if seed is not None else 0, 'dropout_implementation', mode) return out helper = LayerHelper('dropout', **locals()) check_variable_and_dtype(x, 'x', ['float16', 'float32', 'float64'], 'dropout') out = helper.create_variable_for_type_inference(dtype=x.dtype) mask = helper.create_variable_for_type_inference( dtype=core.VarDesc.VarType.UINT8, stop_gradient=True) attrs = get_attrs(helper.main_program, p, not training, seed) helper.append_op( type='dropout', inputs={'X': [x]}, outputs={'Out': [out], 'Mask': [mask]}, attrs=attrs) return out else: #sometimes called dropout_nd #TODO: optimize with c++ if not in_dygraph_mode(): check_variable_and_dtype(x, 'x', ['float32', 'float64'], 'dropout') dtype = x.dtype keep_prob = 1 - p if training: if p == 1.: return layers.scale(x, scale=0.) scale_input = layers.scale( x, scale=1 / keep_prob) if mode == 'upscale_in_train' else x #get mask shape input_shape = x.shape drop_axes = [axis] if isinstance(axis, int) else axis if max(drop_axes) > len(input_shape) - 1: raise ValueError("axis value should less than dimensions of x:{}, but get drop_axes value:{} " \ .format(len(input_shape), max(drop_axes))) if len(drop_axes) > len(input_shape): raise ValueError( "length of axis should not greater than dimensions of x:{}, but get length of drop axes: {}". format(len(input_shape), len(drop_axes))) mask_shape = [1] * len(input_shape) for i in drop_axes: mask_shape[i] = input_shape[i] #get mask random_tensor = layers.uniform_random( mask_shape, dtype='float32', min=0., max=1.0) p = layers.fill_constant(shape=[1], dtype='float32', value=p) keep_mask = layers.greater_equal(random_tensor, p) scale_input = layers.cast(scale_input, dtype) keep_mask = layers.cast(keep_mask, dtype) ret = paddle.multiply(scale_input, keep_mask, name=name) return ret else: # test ret = layers.scale( x, scale=keep_prob) if mode == 'downscale_in_infer' else x return ret def dropout2d(x, p=0.5, training=True, data_format='NCHW', name=None): """ Randomly zero out entire channels (in the batched input 4d tensor with the shape `NCHW` , a channel is a 2D feature map with the shape `HW` ). Each channel will be zeroed out independently on every forward call with probability `p` using samples from a Bernoulli distribution. See ``paddle.nn.functional.dropout`` for more details. Args: x (Tensor): The input is 4-D Tensor with shape [N, C, H, W] or [N, H, W, C]. The data type is float32 or float64. p (float): Probability of setting units to zero. Default 0.5. training (bool): A flag indicating whether it is in train phrase or not. Default True. data_format (str, optional): Specify the data format of the input, and the data format of the output will be consistent with that of the input. An optional string from: `NCHW` , `NHWC` . The default is `NCHW` . When it is `NCHW` , the data is stored in the order of: [batch_size, input_channels, input_height, input_width]. name (str, optional): Name for the operation (optional, default is None). For more information, please refer to :ref:`api_guide_Name`. Returns: A Tensor representing the dropout2d, has same shape and data type as `x` . Examples: .. code-block:: python import paddle import numpy as np paddle.disable_static() x = np.random.random(size=(2, 3, 4, 5)).astype('float32') x = paddle.to_tensor(x) y_train = paddle.nn.functional.dropout2d(x) #train y_test = paddle.nn.functional.dropout2d(x, training=False) #test for i in range(2): for j in range(3): print(x.numpy()[i,j,:,:]) print(y_train.numpy()[i,j,:,:]) # may all 0 print(y_test.numpy()[i,j,:,:]) """ input_shape = x.shape if len(input_shape) != 4: raise ValueError("dimensions of x should be 4, but received {} != 4"\ .format(len(input_shape))) if data_format not in ["NCHW", "NHWC"]: raise ValueError( "Attr(data_format) should be 'NCHW' or 'NHWC'. Received " "Attr(data_format): %s." % str(data_format)) return dropout( x, p=p, axis=[0, 1] if data_format == 'NCHW' else [0, 3], training=training, mode="upscale_in_train", name=name) def dropout3d(x, p=0.5, training=True, data_format='NCDHW', name=None): """ Randomly zero out entire channels (in the batched input 5d tensor with the shape `NCDHW` , a channel is a 3D feature map with the shape `DHW` ). Each channel will be zeroed out independently on every forward call with probability `p` using samples from a Bernoulli distribution. See ``paddle.nn.functional.dropout`` for more details. Args: x (Tensor): The input is 5-D Tensor with shape [N, C, D, H, W] or [N, D, H, W, C]. The data type is float32 or float64. p (float): Probability of setting units to zero. Default 0.5. training (bool): A flag indicating whether it is in train phrase or not. Default True. data_format (str, optional): Specify the data format of the input, and the data format of the output will be consistent with that of the input. An optional string from: ``NCDHW``, ``NDHWC``. The default is ``NCDHW`` . When it is ``NCDHW`` , the data is stored in the order of: [batch_size, input_channels, input_depth, input_height, input_width]. name (str, optional): Name for the operation (optional, default is None). For more information, please refer to :ref:`api_guide_Name`. Returns: A Tensor representing the dropout3d, has same shape and data type with `x` . Examples: .. code-block:: python import paddle import numpy as np paddle.disable_static() x = np.random.random(size=(2, 3, 4, 5, 6)).astype('float32') x = paddle.to_tensor(x) y_train = paddle.nn.functional.dropout3d(x) #train y_test = paddle.nn.functional.dropout3d(x, training=False) #test print(x.numpy()[0,0,:,:,:]) print(y_train.numpy()[0,0,:,:,:]) # may all 0 print(y_test.numpy()[0,0,:,:,:]) """ input_shape = x.shape if len(input_shape) != 5: raise ValueError("dimensions of x should be 5, but received {} != 5" \ .format(len(input_shape))) if data_format not in ["NCDHW", "NDHWC"]: raise ValueError( "Attr(data_format) should be 'NCDHW' or 'NDHWC'. Received " "Attr(data_format): %s." % str(data_format)) return dropout( x, p=p, axis=[0, 1] if data_format == 'NCDHW' else [0, 4], training=training, mode="upscale_in_train", name=name) def alpha_dropout(x, p=0.5, training=True, name=None): """ Alpha Dropout is a type of Dropout that maintains the self-normalizing property. For an input with zero mean and unit standard deviation, the output of Alpha Dropout maintains the original mean and standard deviation of the input. Alpha Dropout fits well to SELU activate function by randomly setting activations to the negative saturation value. Args: x (Tensor): The input tensor. The data type is float32 or float64. p (float | int): Probability of setting units to zero. Default 0.5. training (bool): A flag indicating whether it is in train phrase or not. Default True. name (str, optional): Name for the operation (optional, default is None). For more information, please refer to :ref:`api_guide_Name`. Returns: A Tensor representing the dropout, has same shape and data type as `x`. Examples: .. code-block:: python import paddle import numpy as np paddle.disable_static() x = np.array([[-1, 1], [-1, 1]]).astype('float32') x = paddle.to_tensor(x) y_train = paddle.nn.functional.alpha_dropout(x, 0.5) y_test = paddle.nn.functional.alpha_dropout(x, 0.5, training=False) print(x.numpy()) print(y_train.numpy()) # [[-0.10721093, 1.6655989 ], [-0.7791938, -0.7791938]] (randomly) print(y_test.numpy()) """ if not isinstance(p, (float, int)): raise TypeError("p argument should be a float or int") if p < 0 or p > 1: raise ValueError("p argument should between 0 and 1") if not in_dygraph_mode(): check_variable_and_dtype(x, 'x', ['float32', 'float64'], 'alpha_dropout') if training: #get transformation params alpha = 1.6732632423543772848170429916717 scale = 1.0507009873554804934193349852946 alpha_p = -alpha * scale a = ((1 - p) * (1 + p * alpha_p**2))**-0.5 b = -a * alpha_p * p dtype = x.dtype input_shape = x.shape #get mask random_tensor = layers.uniform_random( input_shape, dtype='float32', min=0., max=1.0) p = layers.fill_constant(shape=[1], dtype='float32', value=p) keep_mask = layers.greater_equal(random_tensor, p) keep_mask = layers.cast(keep_mask, dtype) drop_mask = layers.elementwise_sub( layers.fill_constant( shape=input_shape, dtype=dtype, value=1.), keep_mask) #apply mask b = layers.fill_constant(shape=[1], dtype=dtype, value=b) y = layers.elementwise_add( paddle.multiply(x, keep_mask), layers.scale( drop_mask, scale=alpha_p)) res = layers.elementwise_add(layers.scale(y, scale=a), b, name=name) return res else: # test return x def pad(x, pad, mode='constant', value=0, data_format="NCHW", name=None): """ Pad tensor according to 'pad' and 'mode'. If mode is 'reflect', pad[0] and pad[1] must be no greater than width-1. The height and depth dimension has the same condition. Parameters: x (Tensor): The input tensor with data type float32/double/int32/int64_t. pad (Tensor | List[int32]): The padding size with data type int32. [len(padding)/2] dimensions of input will be padded. 1. If input dimension is 3, then the pad has the form (pad_left, pad_right). 2. If the input dimension is 4, then the pad has the form (pad_left, pad_right, pad_top, pad_bottom). 3. If the input dimension is 5, then the pad has the form (pad_left, pad_right, pad_top, pad_bottom, pad_front, pad_back). mode (str): Four modes: 'constant' (default), 'reflect', 'replicate', 'circular'. When in 'constant' mode, this op uses a constant value to pad the input tensor. When in 'reflect' mode, uses reflection of the input boundaries to pad the input tensor. When in 'replicate' mode, uses input boundaries to pad the input tensor. When in 'circular' mode, uses circular input to pad the input tensor. Default is 'constant' value (float32): The value to fill the padded areas in 'constant' mode . Default is 0.0 data_format (str): An string from: "NCL", "NLC", NHWC", "NCHW", "NCDHW", "NDHWC". Specify the data format of the input data. Default is "NCHW" name (str, optional) : The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name`. Returns: a Tensor padded according to pad and mode and data type is same as input. Return Type: Tensor Examples: .. code-block:: text x = [[[[[1., 2., 3.], [4., 5., 6.]]]]] Case 0: pad = [2, 2, 1, 1, 0, 0], mode = 'constant' value = 0 Out = [[[[[0. 0. 0. 0. 0. 0. 0.] [0. 0. 1. 2. 3. 0. 0.] [0. 0. 4. 5. 6. 0. 0.] [0. 0. 0. 0. 0. 0. 0.]]]]] Case 1: pad = [2, 2, 1, 1, 0, 0], mode = 'reflect' Out = [[[[[6. 5. 4. 5. 6. 5. 4.] [3. 2. 1. 2. 3. 2. 1.] [6. 5. 4. 5. 6. 5. 4.] [3. 2. 1. 2. 3. 2. 1.]]]]] Case 2: pad = [2, 2, 1, 1, 0, 0], mode = 'replicate' Out = [[[[[1. 1. 1. 2. 3. 3. 3.] [1. 1. 1. 2. 3. 3. 3.] [4. 4. 4. 5. 6. 6. 6.] [4. 4. 4. 5. 6. 6. 6.]]]]] Case 3: pad = [2, 2, 1, 1, 0, 0], mode = 'circular' Out = [[[[[5. 6. 4. 5. 6. 4. 5.] [2. 3. 1. 2. 3. 1. 2.] [5. 6. 4. 5. 6. 4. 5.] [2. 3. 1. 2. 3. 1. 2.]]]]] Code Examples: .. code-block:: python import numpy as np import paddle import paddle.nn.functional as F paddle.disable_static() # example 1 x_shape = (1, 1, 3) x = np.arange(np.prod(x_shape), dtype=np.float32).reshape(x_shape) + 1 tensor_x = paddle.to_tensor(x) y = F.pad(tensor_x, pad=[2, 3], value=1, mode='constant') print(y.numpy()) # [[[1. 1. 1. 2. 3. 1. 1. 1.]]] # example 2 x_shape = (1, 1, 2, 3) x = np.arange(np.prod(x_shape), dtype=np.float32).reshape(x_shape) + 1 tensor_x = paddle.to_tensor(x) y = F.pad(tensor_x, pad=[1, 2, 1, 1], value=1, mode='circular') print(y.numpy()) # [[[[6. 4. 5. 6. 4. 5.] # [3. 1. 2. 3. 1. 2.] # [6. 4. 5. 6. 4. 5.] # [3. 1. 2. 3. 1. 2.]]]] """ assert mode in ['reflect', 'replicate', 'constant', 'circular'], \ "mode should be one of constant, reflect, replicate, circular, but got {}.".format(mode) data_format = data_format.upper() assert data_format in ["NCL", "NCHW", "NCDHW", "NLC", "NHWC", "NDHWC"], \ "data_format should be in one of [NCL, NCHW, NCDHW, NLC, NHWC, NDHWC], " \ "but got {}".format(data_format) x_dim = len(x.shape) original_data_format = data_format unsqueezed_dim = [] if isinstance(pad, Variable): if data_format in ["NCL", "NCHW", "NCDHW"]: data_format = "NCDHW" if x_dim == 3: pad = concat([zeros((4, ), dtype="int32"), pad], axis=0) unsqueezed_dim = [3, 4] x = unsqueeze(x, axes=unsqueezed_dim) elif x_dim == 4: pad = concat([pad, zeros((2, ), dtype="int32")], axis=0) unsqueezed_dim = [2] x = unsqueeze(x, axes=unsqueezed_dim) elif data_format in ["NLC", "NHWC", "NDHWC"]: data_format = "NDHWC" if x_dim == 3: pad = concat([zeros((4, ), dtype="int32"), pad], axis=0) unsqueezed_dim = [2, 3] x = unsqueeze(x, axes=unsqueezed_dim) elif x_dim == 4: pad = concat([pad, zeros((2, ), dtype="int32")], axis=0) unsqueezed_dim = [1] x = unsqueeze(x, axes=unsqueezed_dim) else: if data_format in ["NCL", "NCHW", "NCDHW"]: data_format = "NCDHW" if x_dim == 3: pad = [0, 0, 0, 0] + pad unsqueezed_dim = [3, 4] x = unsqueeze(x, axes=unsqueezed_dim) elif x_dim == 4: pad = pad + [0, 0] unsqueezed_dim = [2] x = unsqueeze(x, axes=unsqueezed_dim) elif data_format in ["NLC", "NHWC", "NDHWC"]: data_format = "NDHWC" if x_dim == 3: pad = [0, 0, 0, 0] + pad unsqueezed_dim = [2, 3] x = unsqueeze(x, axes=unsqueezed_dim) elif x_dim == 4: pad = pad + [0, 0] unsqueezed_dim = [1] x = unsqueeze(x, axes=unsqueezed_dim) if in_dygraph_mode(): if isinstance(pad, Variable): pad = pad.numpy() out = core.ops.pad3d(x, "paddings", pad, "mode", mode, "value", value, "data_format", data_format, "name", name) else: attrs = {'mode': mode, 'value': value, 'data_format': data_format} inputs = {'X': [x]} if isinstance(pad, Variable): inputs['Paddings'] = [pad] attrs['paddings'] = [] else: attrs['paddings'] = pad helper = LayerHelper('pad3d', **locals()) dtype = helper.input_dtype(input_param_name='input') out = helper.create_variable_for_type_inference(dtype) helper.append_op( type='pad3d', inputs=inputs, outputs={"Out": out}, attrs=attrs) if len(unsqueezed_dim) != 0: out = squeeze(out, axes=unsqueezed_dim) return out def cosine_similarity(x1, x2, axis=1, eps=1e-8): """ Compute cosine similarity between x1 and x2 along axis. Parameters: x1 (Tensor): First input. float32/double. x2 (Tensor): Second input. float32/double. axis (int): Dimension of vectors to compute cosine similarity. Default is 1. eps(float): Small value to avoid division by zero. Default is 1e-8. Returns: a Tensor representing cosine similarity between x1 and x2 along axis. Return Type: Tensor Examples: .. code-block:: text Case 0: x1 = [[0.8024077 0.9927354 0.27238318 0.8344984 ] [0.48949873 0.5797396 0.65444374 0.66510963] [0.1031398 0.9614342 0.08365563 0.6796464 ] [0.10760343 0.7461209 0.7726148 0.5801006 ]] x2 = [[0.62913156 0.1536727 0.9847992 0.04591406] [0.9098952 0.15715368 0.8671125 0.3156102 ] [0.4427798 0.54136837 0.5276275 0.32394758] [0.3769419 0.8535014 0.48041078 0.9256797 ]] axis = 1 eps = 1e-8 Out: [0.5275037 0.8368967 0.75037485 0.9245899] Code Examples: .. code-block:: python import paddle import paddle.nn as nn import numpy as np paddle.disable_static() np.random.seed(0) x1 = np.random.rand(2,3) x2 = np.random.rand(2,3) x1 = paddle.to_tensor(x1) x2 = paddle.to_tensor(x2) result = paddle.nn.functional.cosine_similarity(x1, x2, axis=0) print(result.numpy()) # [0.99806249 0.9817672 0.94987036] """ w12 = sum(elementwise_mul(x1, x2), axis=axis) w1 = sum(elementwise_mul(x1, x1), axis=axis) w2 = sum(elementwise_mul(x2, x2), axis=axis) n12 = sqrt(clip(w1 * w2, min=eps * eps)) cos_sim = w12 / n12 return cos_sim