Skip to content

R
rt-thread

2301_76519099 / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 3
Star 1
Fork 1
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 eddf2386 编写于 作者: G GW
浏览文件
操作

修改配置选项，添加条件编译

上级 124d9d0c
隐藏空白更改
内联 并排
Showing with 2633 addition and 3189 deletion
bsp/stm32/stm32l476-st-nucleo/.config
浏览文件 @ eddf2386
...@@ -344,9 +344,7 @@ CONFIG_BSP_USING_GPIO=y ...@@ -344,9 +344,7 @@ CONFIG_BSP_USING_GPIO=y
CONFIG_BSP_USING_UART=y CONFIG_BSP_USING_UART=y
CONFIG_BSP_USING_UART2=y CONFIG_BSP_USING_UART2=y
# CONFIG_BSP_UART2_RX_USING_DMA is not set # CONFIG_BSP_UART2_RX_USING_DMA is not set
# CONFIG_BSP_USING_I2C1 is not set # CONFIG_BSP_USING_I2C is not set
# CONFIG_BSP_USING_I2C2 is not set
# CONFIG_BSP_USING_I2C3 is not set
# CONFIG_BSP_USING_ONCHIP_RTC is not set # CONFIG_BSP_USING_ONCHIP_RTC is not set
# #
......
bsp/stm32/stm32l476-st-nucleo/board/Kconfig
浏览文件 @ eddf2386
...@@ -30,67 +30,66 @@ menu "On-chip Peripheral Drivers" ...@@ -30,67 +30,66 @@ menu "On-chip Peripheral Drivers"
config BSP_USING_UART2 config BSP_USING_UART2
bool "Enable UART2" bool "Enable UART2"
default n default n
config BSP_UART2_RX_USING_DMA config BSP_UART2_RX_USING_DMA
bool "Enable UART2 RX DMA" bool "Enable UART2 RX DMA"
depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
default n default n
endif endif
menuconfig BSP_USING_I2C1 menuconfig BSP_USING_I2C
bool "Enable I2C1 BUS (software simulation)" bool "Enable I2C (software simulation)"
default n default n
select RT_USING_I2C select RT_USING_I2C
select RT_USING_I2C_BITOPS select RT_USING_I2C_BITOPS
select RT_USING_PIN select RT_USING_PIN
if BSP_USING_I2C1 if BSP_USING_I2C
config BSP_I2C1_SCL_PIN config BSP_USING_I2C1
int "i2c1 scl pin number" bool "Enable I2C1 BUS (software simulation)"
range 1 176 default n
default 22 if BSP_USING_I2C1
config BSP_I2C1_SDA_PIN config BSP_I2C1_SCL_PIN
int "I2C1 sda pin number" int "i2c1 scl pin number"
range 1 176 range 1 176
default 23 default 22
endif config BSP_I2C1_SDA_PIN
int "I2C1 sda pin number"
range 1 176
default 23
endif
menuconfig BSP_USING_I2C2 config BSP_USING_I2C2
bool "Enable I2C2 BUS (software simulation)" bool "Enable I2C2 BUS (software simulation)"
default n default n
select RT_USING_I2C if BSP_USING_I2C2
select RT_USING_I2C_BITOPS config BSP_I2C2_SCL_PIN
select RT_USING_PIN int "i2c2 scl pin number"
if BSP_USING_I2C2 range 1 176
config BSP_I2C2_SCL_PIN default 26
int "i2c2 scl pin number" config BSP_I2C2_SDA_PIN
range 1 176 int "I2C2 sda pin number"
default 26 range 1 176
config BSP_I2C2_SDA_PIN default 27
int "I2C2 sda pin number" endif
range 1 176
default 27
endif
menuconfig BSP_USING_I2C3 config BSP_USING_I2C3
bool "Enable I2C3 BUS (software simulation)" bool "Enable I2C3 BUS (software simulation)"
default n default n
select RT_USING_I2CS if BSP_USING_I2C3
select RT_USING_I2C_BITOPS config BSP_I2C3_SCL_PIN
select RT_USING_PIN int "i2c3 scl pin number"
if BSP_USING_I2C3 range 1 176
config BSP_I2C3_SCL_PIN default 32
int "i2c3 scl pin number" config BSP_I2C3_SDA_PIN
range 1 176 int "I2C3 sda pin number"
default 32 range 1 176
config BSP_I2C3_SDA_PIN default 33
int "I2C3 sda pin number" endif
range 1 176
default 33
endif endif
config BSP_USING_ONCHIP_RTC config BSP_USING_ONCHIP_RTC
bool "Enable RTC" bool "Enable RTC"
select RT_USING_RTC select RT_USING_RTC
select RT_USING_LIBC
default n default n
endmenu endmenu
......
bsp/stm32/stm32l476-st-nucleo/board/board.c
浏览文件 @ eddf2386
...@@ -16,10 +16,12 @@ void SystemClock_Config(void) ...@@ -16,10 +16,12 @@ void SystemClock_Config(void)
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
#ifdef BSP_USING_ONCHIP_RTC
/**Configure LSE Drive Capability /**Configure LSE Drive Capability
*/ */
HAL_PWR_EnableBkUpAccess(); HAL_PWR_EnableBkUpAccess();
__HAL_RCC_LSEDRIVE_CONFIG(RCC_LSEDRIVE_LOW); __HAL_RCC_LSEDRIVE_CONFIG(RCC_LSEDRIVE_LOW);
#endif
/**Initializes the CPU, AHB and APB busses clocks /**Initializes the CPU, AHB and APB busses clocks
*/ */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
......
bsp/stm32/stm32l476-st-nucleo/project.ewp
浏览文件 @ eddf2386
<?xml version="1.0" encoding="UTF-8"?>
<project> <project>
<fileVersion>3</fileVersion> <fileVersion>3</fileVersion>
<configuration> <configuration>
<name>rt-thread</name> <name>rt-thread</name>
<toolchain> <toolchain>
<name>ARM</name> <name>ARM</name>
</toolchain> </toolchain>
<debug>1</debug>
<settings>
<name>General</name>
<archiveVersion>3</archiveVersion>
<data>
<version>29</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug> <debug>1</debug>
<settings> <option>
<name>General</name> <name>ExePath</name>
<archiveVersion>3</archiveVersion> <state>build\iar\Exe</state>
<data> </option>
<version>29</version> <option>
<wantNonLocal>1</wantNonLocal> <name>ObjPath</name>
<debug>1</debug> <state>build\iar\Obj</state>
<option> </option>
<name>ExePath</name> <option>
<state>build\iar\Exe</state> <name>ListPath</name>
</option> <state>build\iar\List</state>
<option> </option>
<name>ObjPath</name> <option>
<state>build\iar\Obj</state> <name>GEndianMode</name>
</option> <state>0</state>
<option> </option>
<name>ListPath</name> <option>
<state>build\iar\List</state> <name>Input description</name>
</option> <state>Automatic choice of formatter, without multibyte support.</state>
<option> </option>
<name>GEndianMode</name> <option>
<state>0</state> <name>Output description</name>
</option> <state>Automatic choice of formatter, without multibyte support.</state>
<option> </option>
<name>Input description</name> <option>
<state>Automatic choice of formatter, without multibyte support.</state> <name>GOutputBinary</name>
</option> <state>0</state>
<option> </option>
<name>Output description</name> <option>
<state>Automatic choice of formatter, without multibyte support.</state> <name>OGCoreOrChip</name>
</option> <state>1</state>
<option> </option>
<name>GOutputBinary</name> <option>
<state>0</state> <name>GRuntimeLibSelect</name>
</option> <version>0</version>
<option> <state>1</state>
<name>OGCoreOrChip</name> </option>
<state>1</state> <option>
</option> <name>GRuntimeLibSelectSlave</name>
<option> <version>0</version>
<name>GRuntimeLibSelect</name> <state>1</state>
<version>0</version> </option>
<state>1</state> <option>
</option> <name>RTDescription</name>
<option> <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
<name>GRuntimeLibSelectSlave</name> </option>
<version>0</version> <option>
<state>1</state> <name>OGProductVersion</name>
</option> <state>6.30.6.53380</state>
<option> </option>
<name>RTDescription</name> <option>
<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state> <name>OGLastSavedByProductVersion</name>
</option> <state>8.11.3.13977</state>
<option> </option>
<name>OGProductVersion</name> <option>
<state>6.30.6.53380</state> <name>GeneralEnableMisra</name>
</option> <state>0</state>
<option> </option>
<name>OGLastSavedByProductVersion</name> <option>
<state>8.11.2.13604</state> <name>GeneralMisraVerbose</name>
</option> <state>0</state>
<option> </option>
<name>GeneralEnableMisra</name> <option>
<state>0</state> <name>OGChipSelectEditMenu</name>
</option> <state>STM32L475VE ST STM32L475VE</state>
<option> </option>
<name>GeneralMisraVerbose</name> <option>
<state>0</state> <name>GenLowLevelInterface</name>
</option> <state>1</state>
<option> </option>
<name>OGChipSelectEditMenu</name> <option>
<state>STM32L475VE ST STM32L475VE</state> <name>GEndianModeBE</name>
</option> <state>1</state>
<option> </option>
<name>GenLowLevelInterface</name> <option>
<state>1</state> <name>OGBufferedTerminalOutput</name>
</option> <state>0</state>
<option> </option>
<name>GEndianModeBE</name> <option>
<state>1</state> <name>GenStdoutInterface</name>
</option> <state>0</state>
<option> </option>
<name>OGBufferedTerminalOutput</name> <option>
<state>0</state> <name>GeneralMisraRules98</name>
</option> <version>0</version>
<option> <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
<name>GenStdoutInterface</name> </option>
<state>0</state> <option>
</option> <name>GeneralMisraVer</name>
<option> <state>0</state>
<name>GeneralMisraRules98</name> </option>
<version>0</version> <option>
<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state> <name>GeneralMisraRules04</name>
</option> <version>0</version>
<option> <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
<name>GeneralMisraVer</name> </option>
<state>0</state> <option>
</option> <name>RTConfigPath2</name>
<option> <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
<name>GeneralMisraRules04</name> </option>
<version>0</version> <option>
<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state> <name>GBECoreSlave</name>
</option> <version>25</version>
<option> <state>39</state>
<name>RTConfigPath2</name> </option>
<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state> <option>
</option> <name>OGUseCmsis</name>
<option> <state>0</state>
<name>GBECoreSlave</name> </option>
<version>25</version> <option>
<state>39</state> <name>OGUseCmsisDspLib</name>
</option> <state>0</state>
<option> </option>
<name>OGUseCmsis</name> <option>
<state>0</state> <name>GRuntimeLibThreads</name>
</option> <state>0</state>
<option> </option>
<name>OGUseCmsisDspLib</name> <option>
<state>0</state> <name>CoreVariant</name>
</option> <version>25</version>
<option> <state>39</state>
<name>GRuntimeLibThreads</name> </option>
<state>0</state> <option>
</option> <name>GFPUDeviceSlave</name>
<option> <state>STM32L475VE ST STM32L475VE</state>
<name>CoreVariant</name> </option>
<version>25</version> <option>
<state>39</state> <name>FPU2</name>
</option> <version>0</version>
<option> <state>4</state>
<name>GFPUDeviceSlave</name> </option>
<state>STM32L475VE ST STM32L475VE</state> <option>
</option> <name>NrRegs</name>
<option> <version>0</version>
<name>FPU2</name> <state>1</state>
<version>0</version> </option>
<state>4</state> <option>
</option> <name>NEON</name>
<option> <state>0</state>
<name>NrRegs</name> </option>
<version>0</version> <option>
<state>1</state> <name>GFPUCoreSlave2</name>
</option> <version>25</version>
<option> <state>39</state>
<name>NEON</name> </option>
<state>0</state> <option>
</option> <name>OGCMSISPackSelectDevice</name>
<option> </option>
<name>GFPUCoreSlave2</name> <option>
<version>25</version> <name>OgLibHeap</name>
<state>39</state> <state>0</state>
</option> </option>
<option> <option>
<name>OGCMSISPackSelectDevice</name> <name>OGLibAdditionalLocale</name>
</option> <state>0</state>
<option> </option>
<name>OgLibHeap</name> <option>
<state>0</state> <name>OGPrintfVariant</name>
</option> <version>0</version>
<option> <state>0</state>
<name>OGLibAdditionalLocale</name> </option>
<state>0</state> <option>
</option> <name>OGPrintfMultibyteSupport</name>
<option> <state>0</state>
<name>OGPrintfVariant</name> </option>
<version>0</version> <option>
<state>0</state> <name>OGScanfVariant</name>
</option> <version>0</version>
<option> <state>0</state>
<name>OGPrintfMultibyteSupport</name> </option>
<state>0</state> <option>
</option> <name>OGScanfMultibyteSupport</name>
<option> <state>0</state>
<name>OGScanfVariant</name> </option>
<version>0</version> <option>
<state>0</state> <name>GenLocaleTags</name>
</option> <state />
<option> </option>
<name>OGScanfMultibyteSupport</name> <option>
<state>0</state> <name>GenLocaleDisplayOnly</name>
</option> <state />
<option> </option>
<name>GenLocaleTags</name> <option>
<state></state> <name>DSPExtension</name>
</option> <state>1</state>
<option> </option>
<name>GenLocaleDisplayOnly</name> </data>
<state></state> </settings>
</option> <settings>
<option> <name>ICCARM</name>
<name>DSPExtension</name> <archiveVersion>2</archiveVersion>
<state>1</state> <data>
</option> <version>34</version>
</data> <wantNonLocal>1</wantNonLocal>
</settings> <debug>1</debug>
<settings> <option>
<name>ICCARM</name> <name>CCOptimizationNoSizeConstraints</name>
<archiveVersion>2</archiveVersion> <state>0</state>
<data> </option>
<version>34</version> <option>
<wantNonLocal>1</wantNonLocal> <name>CCDefines</name>
<debug>1</debug> <state />
<option> <state>STM32L476xx</state>
<name>CCOptimizationNoSizeConstraints</name> <state>RT_USING_DLIBC</state>
<state>0</state> <state>USE_HAL_DRIVER</state>
</option> </option>
<option> <option>
<name>CCDefines</name> <name>CCPreprocFile</name>
<state>STM32L476xx</state> <state>0</state>
<state>USE_HAL_DRIVER</state> </option>
</option> <option>
<option> <name>CCPreprocComments</name>
<name>CCPreprocFile</name> <state>0</state>
<state>0</state> </option>
</option> <option>
<option> <name>CCPreprocLine</name>
<name>CCPreprocComments</name> <state>0</state>
<state>0</state> </option>
</option> <option>
<option> <name>CCListCFile</name>
<name>CCPreprocLine</name> <state>0</state>
<state>0</state> </option>
</option> <option>
<option> <name>CCListCMnemonics</name>
<name>CCListCFile</name> <state>0</state>
<state>0</state> </option>
</option> <option>
<option> <name>CCListCMessages</name>
<name>CCListCMnemonics</name> <state>0</state>
<state>0</state> </option>
</option> <option>
<option> <name>CCListAssFile</name>
<name>CCListCMessages</name> <state>0</state>
<state>0</state> </option>
</option> <option>
<option> <name>CCListAssSource</name>
<name>CCListAssFile</name> <state>0</state>
<state>0</state> </option>
</option> <option>
<option> <name>CCEnableRemarks</name>
<name>CCListAssSource</name> <state>0</state>
<state>0</state> </option>
</option> <option>
<option> <name>CCDiagSuppress</name>
<name>CCEnableRemarks</name> <state>Pa050</state>
<state>0</state> </option>
</option> <option>
<option> <name>CCDiagRemark</name>
<name>CCDiagSuppress</name> <state />
<state>Pa050</state> </option>
</option> <option>
<option> <name>CCDiagWarning</name>
<name>CCDiagRemark</name> <state />
<state></state> </option>
</option> <option>
<option> <name>CCDiagError</name>
<name>CCDiagWarning</name> <state />
<state></state> </option>
</option> <option>
<option> <name>CCObjPrefix</name>
<name>CCDiagError</name> <state>1</state>
<state></state> </option>
</option> <option>
<option> <name>CCAllowList</name>
<name>CCObjPrefix</name> <version>1</version>
<state>1</state> <state>00000000</state>
</option> </option>
<option> <option>
<name>CCAllowList</name> <name>CCDebugInfo</name>
<version>1</version> <state>1</state>
<state>00000000</state> </option>
</option> <option>
<option> <name>IEndianMode</name>
<name>CCDebugInfo</name> <state>1</state>
<state>1</state> </option>
</option> <option>
<option> <name>IProcessor</name>
<name>IEndianMode</name> <state>1</state>
<state>1</state> </option>
</option> <option>
<option> <name>IExtraOptionsCheck</name>
<name>IProcessor</name> <state>0</state>
<state>1</state> </option>
</option> <option>
<option> <name>IExtraOptions</name>
<name>IExtraOptionsCheck</name> <state />
<state>0</state> </option>
</option> <option>
<option> <name>CCLangConformance</name>
<name>IExtraOptions</name> <state>0</state>
<state></state> </option>
</option> <option>
<option> <name>CCSignedPlainChar</name>
<name>CCLangConformance</name> <state>1</state>
<state>0</state> </option>
</option> <option>
<option> <name>CCRequirePrototypes</name>
<name>CCSignedPlainChar</name> <state>0</state>
<state>1</state> </option>
</option> <option>
<option> <name>CCDiagWarnAreErr</name>
<name>CCRequirePrototypes</name> <state>0</state>
<state>0</state> </option>
</option> <option>
<option> <name>CCCompilerRuntimeInfo</name>
<name>CCDiagWarnAreErr</name> <state>0</state>
<state>0</state> </option>
</option> <option>
<option> <name>IFpuProcessor</name>
<name>CCCompilerRuntimeInfo</name> <state>1</state>
<state>0</state> </option>
</option> <option>
<option> <name>OutputFile</name>
<name>IFpuProcessor</name> <state>$FILE_BNAME$.o</state>
<state>1</state> </option>
</option> <option>
<option> <name>CCLibConfigHeader</name>
<name>OutputFile</name> <state>1</state>
<state>$FILE_BNAME$.o</state> </option>
</option> <option>
<option> <name>PreInclude</name>
<name>CCLibConfigHeader</name> <state />
<state>1</state> </option>
</option> <option>
<option> <name>CompilerMisraOverride</name>
<name>PreInclude</name> <state>0</state>
<state></state> </option>
</option> <option>
<option> <name>CCIncludePath2</name>
<name>CompilerMisraOverride</name> <state />
<state>0</state> <state>$PROJ_DIR$\..\..\..\components\finsh</state>
</option> <state>$PROJ_DIR$\..\..\..\libcpu\arm\common</state>
<option> <state>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4</state>
<name>CCIncludePath2</name> <state>$PROJ_DIR$\board\ports</state>
<state>$PROJ_DIR$\..\..\..\components\finsh</state> <state>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Include</state>
<state>$PROJ_DIR$\..\..\..\libcpu\arm\common</state> <state>$PROJ_DIR$\..\..\..\components\drivers\include</state>
<state>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4</state> <state>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Include</state>
<state>$PROJ_DIR$\board\ports</state> <state>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Inc</state>
<state>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Include</state> <state>$PROJ_DIR$\.</state>
<state>$PROJ_DIR$\..\..\..\components\drivers\include</state> <state>$PROJ_DIR$\applications</state>
<state>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Include</state> <state>$PROJ_DIR$\..\libraries\HAL_Drivers\config</state>
<state>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Inc</state> <state>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib</state>
<state>$PROJ_DIR$\.</state> <state>$PROJ_DIR$\board</state>
<state>$PROJ_DIR$\applications</state> <state>$PROJ_DIR$\..\..\..\components\libc\compilers\common</state>
<state>$PROJ_DIR$\..\libraries\HAL_Drivers\config</state> <state>$PROJ_DIR$\board\CubeMX_Config\Inc</state>
<state>$PROJ_DIR$\board</state> <state>$PROJ_DIR$\..\..\..\include</state>
<state>$PROJ_DIR$\board\CubeMX_Config\Inc</state> <state>$PROJ_DIR$\..\libraries\HAL_Drivers</state>
<state>$PROJ_DIR$\..\..\..\include</state> </option>
<state>$PROJ_DIR$\..\libraries\HAL_Drivers</state> <option>
</option> <name>CCStdIncCheck</name>
<option> <state>0</state>
<name>CCStdIncCheck</name> </option>
<state>0</state> <option>
</option> <name>CCCodeSection</name>
<option> <state>.text</state>
<name>CCCodeSection</name> </option>
<state>.text</state> <option>
</option> <name>IProcessorMode2</name>
<option> <state>1</state>
<name>IProcessorMode2</name> </option>
<state>1</state> <option>
</option> <name>CCOptLevel</name>
<option> <state>1</state>
<name>CCOptLevel</name> </option>
<state>1</state> <option>
</option> <name>CCOptStrategy</name>
<option> <version>0</version>
<name>CCOptStrategy</name> <state>0</state>
<version>0</version> </option>
<state>0</state> <option>
</option> <name>CCOptLevelSlave</name>
<option> <state>1</state>
<name>CCOptLevelSlave</name> </option>
<state>1</state> <option>
</option> <name>CompilerMisraRules98</name>
<option> <version>0</version>
<name>CompilerMisraRules98</name> <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
<version>0</version> </option>
<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state> <option>
</option> <name>CompilerMisraRules04</name>
<option> <version>0</version>
<name>CompilerMisraRules04</name> <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
<version>0</version> </option>
<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state> <option>
</option> <name>CCPosIndRopi</name>
<option> <state>0</state>
<name>CCPosIndRopi</name> </option>
<state>0</state> <option>
</option> <name>CCPosIndRwpi</name>
<option> <state>0</state>
<name>CCPosIndRwpi</name> </option>
<state>0</state> <option>
</option> <name>CCPosIndNoDynInit</name>
<option> <state>0</state>
<name>CCPosIndNoDynInit</name> </option>
<state>0</state> <option>
</option> <name>IccLang</name>
<option> <state>0</state>
<name>IccLang</name> </option>
<state>0</state> <option>
</option> <name>IccCDialect</name>
<option> <state>1</state>
<name>IccCDialect</name> </option>
<state>1</state> <option>
</option> <name>IccAllowVLA</name>
<option> <state>0</state>
<name>IccAllowVLA</name> </option>
<state>0</state> <option>
</option> <name>IccStaticDestr</name>
<option> <state>1</state>
<name>IccStaticDestr</name> </option>
<state>1</state> <option>
</option> <name>IccCppInlineSemantics</name>
<option> <state>0</state>
<name>IccCppInlineSemantics</name> </option>
<state>0</state> <option>
</option> <name>IccCmsis</name>
<option> <state>1</state>
<name>IccCmsis</name> </option>
<state>1</state> <option>
</option> <name>IccFloatSemantics</name>
<option> <state>0</state>
<name>IccFloatSemantics</name> </option>
<state>0</state> <option>
</option> <name>CCNoLiteralPool</name>
<option> <state>0</state>
<name>CCNoLiteralPool</name> </option>
<state>0</state> <option>
</option> <name>CCOptStrategySlave</name>
<option> <version>0</version>
<name>CCOptStrategySlave</name> <state>0</state>
<version>0</version> </option>
<state>0</state> <option>
</option> <name>CCGuardCalls</name>
<option> <state>1</state>
<name>CCGuardCalls</name> </option>
<state>1</state> <option>
</option> <name>CCEncSource</name>
<option> <state>0</state>
<name>CCEncSource</name> </option>
<state>0</state> <option>
</option> <name>CCEncOutput</name>
<option> <state>0</state>
<name>CCEncOutput</name> </option>
<state>0</state> <option>
</option> <name>CCEncOutputBom</name>
<option> <state>1</state>
<name>CCEncOutputBom</name> </option>
<state>1</state> <option>
</option> <name>CCEncInput</name>
<option> <state>0</state>
<name>CCEncInput</name> </option>
<state>0</state> <option>
</option> <name>IccExceptions2</name>
<option> <state>0</state>
<name>IccExceptions2</name> </option>
<state>0</state> <option>
</option> <name>IccRTTI2</name>
<option> <state>0</state>
<name>IccRTTI2</name> </option>
<state>0</state> </data>
</option> </settings>
</data> <settings>
</settings> <name>AARM</name>
<settings> <archiveVersion>2</archiveVersion>
<name>AARM</name> <data>
<archiveVersion>2</archiveVersion> <version>10</version>
<data> <wantNonLocal>1</wantNonLocal>
<version>10</version> <debug>1</debug>
<wantNonLocal>1</wantNonLocal> <option>
<debug>1</debug> <name>AObjPrefix</name>
<option> <state>1</state>
<name>AObjPrefix</name> </option>
<state>1</state> <option>
</option> <name>AEndian</name>
<option> <state>1</state>
<name>AEndian</name> </option>
<state>1</state> <option>
</option> <name>ACaseSensitivity</name>
<option> <state>1</state>
<name>ACaseSensitivity</name> </option>
<state>1</state> <option>
</option> <name>MacroChars</name>
<option> <version>0</version>
<name>MacroChars</name> <state>0</state>
<version>0</version> </option>
<state>0</state> <option>
</option> <name>AWarnEnable</name>
<option> <state>0</state>
<name>AWarnEnable</name> </option>
<state>0</state> <option>
</option> <name>AWarnWhat</name>
<option> <state>0</state>
<name>AWarnWhat</name> </option>
<state>0</state> <option>
</option> <name>AWarnOne</name>
<option> <state />
<name>AWarnOne</name> </option>
<state></state> <option>
</option> <name>AWarnRange1</name>
<option> <state />
<name>AWarnRange1</name> </option>
<state></state> <option>
</option> <name>AWarnRange2</name>
<option> <state />
<name>AWarnRange2</name> </option>
<state></state> <option>
</option> <name>ADebug</name>
<option> <state>1</state>
<name>ADebug</name> </option>
<state>1</state> <option>
</option> <name>AltRegisterNames</name>
<option> <state>0</state>
<name>AltRegisterNames</name> </option>
<state>0</state> <option>
</option> <name>ADefines</name>
<option> <state />
<name>ADefines</name> </option>
<state></state> <option>
</option> <name>AList</name>
<option> <state>0</state>
<name>AList</name> </option>
<state>0</state> <option>
</option> <name>AListHeader</name>
<option> <state>1</state>
<name>AListHeader</name> </option>
<state>1</state> <option>
</option> <name>AListing</name>
<option> <state>1</state>
<name>AListing</name> </option>
<state>1</state> <option>
</option> <name>Includes</name>
<option> <state>0</state>
<name>Includes</name> </option>
<state>0</state> <option>
</option> <name>MacDefs</name>
<option> <state>0</state>
<name>MacDefs</name> </option>
<state>0</state> <option>
</option> <name>MacExps</name>
<option> <state>1</state>
<name>MacExps</name> </option>
<state>1</state> <option>
</option> <name>MacExec</name>
<option> <state>0</state>
<name>MacExec</name> </option>
<state>0</state> <option>
</option> <name>OnlyAssed</name>
<option> <state>0</state>
<name>OnlyAssed</name> </option>
<state>0</state> <option>
</option> <name>MultiLine</name>
<option> <state>0</state>
<name>MultiLine</name> </option>
<state>0</state> <option>
</option> <name>PageLengthCheck</name>
<option> <state>0</state>
<name>PageLengthCheck</name> </option>
<state>0</state> <option>
</option> <name>PageLength</name>
<option> <state>80</state>
<name>PageLength</name> </option>
<state>80</state> <option>
</option> <name>TabSpacing</name>
<option> <state>8</state>
<name>TabSpacing</name> </option>
<state>8</state> <option>
</option> <name>AXRef</name>
<option> <state>0</state>
<name>AXRef</name> </option>
<state>0</state> <option>
</option> <name>AXRefDefines</name>
<option> <state>0</state>
<name>AXRefDefines</name> </option>
<state>0</state> <option>
</option> <name>AXRefInternal</name>
<option> <state>0</state>
<name>AXRefInternal</name> </option>
<state>0</state> <option>
</option> <name>AXRefDual</name>
<option> <state>0</state>
<name>AXRefDual</name> </option>
<state>0</state> <option>
</option> <name>AProcessor</name>
<option> <state>1</state>
<name>AProcessor</name> </option>
<state>1</state> <option>
</option> <name>AFpuProcessor</name>
<option> <state>1</state>
<name>AFpuProcessor</name> </option>
<state>1</state> <option>
</option> <name>AOutputFile</name>
<option> <state>$FILE_BNAME$.o</state>
<name>AOutputFile</name> </option>
<state>$FILE_BNAME$.o</state> <option>
</option> <name>ALimitErrorsCheck</name>
<option> <state>0</state>
<name>ALimitErrorsCheck</name> </option>
<state>0</state> <option>
</option> <name>ALimitErrorsEdit</name>
<option> <state>100</state>
<name>ALimitErrorsEdit</name> </option>
<state>100</state> <option>
</option> <name>AIgnoreStdInclude</name>
<option> <state>0</state>
<name>AIgnoreStdInclude</name> </option>
<state>0</state> <option>
</option> <name>AUserIncludes</name>
<option> <state />
<name>AUserIncludes</name> </option>
<state></state> <option>
</option> <name>AExtraOptionsCheckV2</name>
<option> <state>0</state>
<name>AExtraOptionsCheckV2</name> </option>
<state>0</state> <option>
</option> <name>AExtraOptionsV2</name>
<option> <state />
<name>AExtraOptionsV2</name> </option>
<state></state> <option>
</option> <name>AsmNoLiteralPool</name>
<option> <state>0</state>
<name>AsmNoLiteralPool</name> </option>
<state>0</state> </data>
</option> </settings>
</data> <settings>
</settings> <name>OBJCOPY</name>
<settings> <archiveVersion>0</archiveVersion>
<name>OBJCOPY</name> <data>
<archiveVersion>0</archiveVersion> <version>1</version>
<data> <wantNonLocal>1</wantNonLocal>
<version>1</version> <debug>1</debug>
<wantNonLocal>1</wantNonLocal> <option>
<debug>1</debug> <name>OOCOutputFormat</name>
<option> <version>3</version>
<name>OOCOutputFormat</name> <state>3</state>
<version>3</version> </option>
<state>3</state> <option>
</option> <name>OCOutputOverride</name>
<option> <state>1</state>
<name>OCOutputOverride</name> </option>
<state>1</state> <option>
</option> <name>OOCOutputFile</name>
<option> <state>../../../rtthread.bin</state>
<name>OOCOutputFile</name> </option>
<state>../../../rtthread.bin</state> <option>
</option> <name>OOCCommandLineProducer</name>
<option> <state>1</state>
<name>OOCCommandLineProducer</name> </option>
<state>1</state> <option>
</option> <name>OOCObjCopyEnable</name>
<option> <state>1</state>
<name>OOCObjCopyEnable</name> </option>
<state>1</state> </data>
</option> </settings>
</data> <settings>
</settings> <name>CUSTOM</name>
<settings> <archiveVersion>3</archiveVersion>
<name>CUSTOM</name> <data>
<archiveVersion>3</archiveVersion> <extensions />
<data> <cmdline />
<extensions></extensions> <hasPrio>0</hasPrio>
<cmdline></cmdline> </data>
<hasPrio>0</hasPrio> </settings>
</data> <settings>
</settings> <name>BICOMP</name>
<settings> <archiveVersion>0</archiveVersion>
<name>BICOMP</name> <data />
<archiveVersion>0</archiveVersion> </settings>
<data /> <settings>
</settings> <name>BUILDACTION</name>
<settings> <archiveVersion>1</archiveVersion>
<name>BUILDACTION</name> <data>
<archiveVersion>1</archiveVersion> <prebuild />
<data> <postbuild />
<prebuild></prebuild> </data>
<postbuild></postbuild> </settings>
</data> <settings>
</settings> <name>ILINK</name>
<settings> <archiveVersion>0</archiveVersion>
<name>ILINK</name> <data>
<archiveVersion>0</archiveVersion> <version>20</version>
<data> <wantNonLocal>1</wantNonLocal>
<version>20</version> <debug>1</debug>
<wantNonLocal>1</wantNonLocal> <option>
<debug>1</debug> <name>IlinkLibIOConfig</name>
<option> <state>1</state>
<name>IlinkLibIOConfig</name> </option>
<state>1</state> <option>
</option> <name>XLinkMisraHandler</name>
<option> <state>0</state>
<name>XLinkMisraHandler</name> </option>
<state>0</state> <option>
</option> <name>IlinkInputFileSlave</name>
<option> <state>0</state>
<name>IlinkInputFileSlave</name> </option>
<state>0</state> <option>
</option> <name>IlinkOutputFile</name>
<option> <state>project.out</state>
<name>IlinkOutputFile</name> </option>
<state>project.out</state> <option>
</option> <name>IlinkDebugInfoEnable</name>
<option> <state>1</state>
<name>IlinkDebugInfoEnable</name> </option>
<state>1</state> <option>
</option> <name>IlinkKeepSymbols</name>
<option> <state />
<name>IlinkKeepSymbols</name> </option>
<state></state> <option>
</option> <name>IlinkRawBinaryFile</name>
<option> <state />
<name>IlinkRawBinaryFile</name> </option>
<state></state> <option>
</option> <name>IlinkRawBinarySymbol</name>
<option> <state />
<name>IlinkRawBinarySymbol</name> </option>
<state></state> <option>
</option> <name>IlinkRawBinarySegment</name>
<option> <state />
<name>IlinkRawBinarySegment</name> </option>
<state></state> <option>
</option> <name>IlinkRawBinaryAlign</name>
<option> <state />
<name>IlinkRawBinaryAlign</name> </option>
<state></state> <option>
</option> <name>IlinkDefines</name>
<option> <state />
<name>IlinkDefines</name> </option>
<state></state> <option>
</option> <name>IlinkConfigDefines</name>
<option> <state />
<name>IlinkConfigDefines</name> </option>
<state></state> <option>
</option> <name>IlinkMapFile</name>
<option> <state>0</state>
<name>IlinkMapFile</name> </option>
<state>0</state> <option>
</option> <name>IlinkLogFile</name>
<option> <state>0</state>
<name>IlinkLogFile</name> </option>
<state>0</state> <option>
</option> <name>IlinkLogInitialization</name>
<option> <state>0</state>
<name>IlinkLogInitialization</name> </option>
<state>0</state> <option>
</option> <name>IlinkLogModule</name>
<option> <state>0</state>
<name>IlinkLogModule</name> </option>
<state>0</state> <option>
</option> <name>IlinkLogSection</name>
<option> <state>0</state>
<name>IlinkLogSection</name> </option>
<state>0</state> <option>
</option> <name>IlinkLogVeneer</name>
<option> <state>0</state>
<name>IlinkLogVeneer</name> </option>
<state>0</state> <option>
</option> <name>IlinkIcfOverride</name>
<option> <state>1</state>
<name>IlinkIcfOverride</name> </option>
<state>1</state> <option>
</option> <name>IlinkIcfFile</name>
<option> <state>$PROJ_DIR$\board\linker_scripts\link.icf</state>
<name>IlinkIcfFile</name> </option>
<state>$PROJ_DIR$\board\linker_scripts\link.icf</state> <option>
</option> <name>IlinkIcfFileSlave</name>
<option> <state />
<name>IlinkIcfFileSlave</name> </option>
<state></state> <option>
</option> <name>IlinkEnableRemarks</name>
<option> <state>0</state>
<name>IlinkEnableRemarks</name> </option>
<state>0</state> <option>
</option> <name>IlinkSuppressDiags</name>
<option> <state />
<name>IlinkSuppressDiags</name> </option>
<state></state> <option>
</option> <name>IlinkTreatAsRem</name>
<option> <state />
<name>IlinkTreatAsRem</name> </option>
<state></state> <option>
</option> <name>IlinkTreatAsWarn</name>
<option> <state />
<name>IlinkTreatAsWarn</name> </option>
<state></state> <option>
</option> <name>IlinkTreatAsErr</name>
<option> <state />
<name>IlinkTreatAsErr</name> </option>
<state></state> <option>
</option> <name>IlinkWarningsAreErrors</name>
<option> <state>0</state>
<name>IlinkWarningsAreErrors</name> </option>
<state>0</state> <option>
</option> <name>IlinkUseExtraOptions</name>
<option> <state>0</state>
<name>IlinkUseExtraOptions</name> </option>
<state>0</state> <option>
</option> <name>IlinkExtraOptions</name>
<option> <state />
<name>IlinkExtraOptions</name> </option>
<state></state> <option>
</option> <name>IlinkLowLevelInterfaceSlave</name>
<option> <state>1</state>
<name>IlinkLowLevelInterfaceSlave</name> </option>
<state>1</state> <option>
</option> <name>IlinkAutoLibEnable</name>
<option> <state>1</state>
<name>IlinkAutoLibEnable</name> </option>
<state>1</state> <option>
</option> <name>IlinkAdditionalLibs</name>
<option> <state />
<name>IlinkAdditionalLibs</name> </option>
<state></state> <option>
</option> <name>IlinkOverrideProgramEntryLabel</name>
<option> <state>0</state>
<name>IlinkOverrideProgramEntryLabel</name> </option>
<state>0</state> <option>
</option> <name>IlinkProgramEntryLabelSelect</name>
<option> <state>0</state>
<name>IlinkProgramEntryLabelSelect</name> </option>
<state>0</state> <option>
</option> <name>IlinkProgramEntryLabel</name>
<option> <state>__iar_program_start</state>
<name>IlinkProgramEntryLabel</name> </option>
<state>__iar_program_start</state> <option>
</option> <name>DoFill</name>
<option> <state>0</state>
<name>DoFill</name> </option>
<state>0</state> <option>
</option> <name>FillerByte</name>
<option> <state>0xFF</state>
<name>FillerByte</name> </option>
<state>0xFF</state> <option>
</option> <name>FillerStart</name>
<option> <state>0x0</state>
<name>FillerStart</name> </option>
<state>0x0</state> <option>
</option> <name>FillerEnd</name>
<option> <state>0x0</state>
<name>FillerEnd</name> </option>
<state>0x0</state> <option>
</option> <name>CrcSize</name>
<option> <version>0</version>
<name>CrcSize</name> <state>1</state>
<version>0</version> </option>
<state>1</state> <option>
</option> <name>CrcAlign</name>
<option> <state>1</state>
<name>CrcAlign</name> </option>
<state>1</state> <option>
</option> <name>CrcPoly</name>
<option> <state>0x11021</state>
<name>CrcPoly</name> </option>
<state>0x11021</state> <option>
</option> <name>CrcCompl</name>
<option> <version>0</version>
<name>CrcCompl</name> <state>0</state>
<version>0</version> </option>
<state>0</state> <option>
</option> <name>CrcBitOrder</name>
<option> <version>0</version>
<name>CrcBitOrder</name> <state>0</state>
<version>0</version> </option>
<state>0</state> <option>
</option> <name>CrcInitialValue</name>
<option> <state>0x0</state>
<name>CrcInitialValue</name> </option>
<state>0x0</state> <option>
</option> <name>DoCrc</name>
<option> <state>0</state>
<name>DoCrc</name> </option>
<state>0</state> <option>
</option> <name>IlinkBE8Slave</name>
<option> <state>1</state>
<name>IlinkBE8Slave</name> </option>
<state>1</state> <option>
</option> <name>IlinkBufferedTerminalOutput</name>
<option> <state>1</state>
<name>IlinkBufferedTerminalOutput</name> </option>
<state>1</state> <option>
</option> <name>IlinkStdoutInterfaceSlave</name>
<option> <state>1</state>
<name>IlinkStdoutInterfaceSlave</name> </option>
<state>1</state> <option>
</option> <name>CrcFullSize</name>
<option> <state>0</state>
<name>CrcFullSize</name> </option>
<state>0</state> <option>
</option> <name>IlinkIElfToolPostProcess</name>
<option> <state>0</state>
<name>IlinkIElfToolPostProcess</name> </option>
<state>0</state> <option>
</option> <name>IlinkLogAutoLibSelect</name>
<option> <state>0</state>
<name>IlinkLogAutoLibSelect</name> </option>
<state>0</state> <option>
</option> <name>IlinkLogRedirSymbols</name>
<option> <state>0</state>
<name>IlinkLogRedirSymbols</name> </option>
<state>0</state> <option>
</option> <name>IlinkLogUnusedFragments</name>
<option> <state>0</state>
<name>IlinkLogUnusedFragments</name> </option>
<state>0</state> <option>
</option> <name>IlinkCrcReverseByteOrder</name>
<option> <state>0</state>
<name>IlinkCrcReverseByteOrder</name> </option>
<state>0</state> <option>
</option> <name>IlinkCrcUseAsInput</name>
<option> <state>1</state>
<name>IlinkCrcUseAsInput</name> </option>
<state>1</state> <option>
</option> <name>IlinkOptInline</name>
<option> <state>0</state>
<name>IlinkOptInline</name> </option>
<state>0</state> <option>
</option> <name>IlinkOptExceptionsAllow</name>
<option> <state>1</state>
<name>IlinkOptExceptionsAllow</name> </option>
<state>1</state> <option>
</option> <name>IlinkOptExceptionsForce</name>
<option> <state>0</state>
<name>IlinkOptExceptionsForce</name> </option>
<state>0</state> <option>
</option> <name>IlinkCmsis</name>
<option> <state>1</state>
<name>IlinkCmsis</name> </option>
<state>1</state> <option>
</option> <name>IlinkOptMergeDuplSections</name>
<option> <state>0</state>
<name>IlinkOptMergeDuplSections</name> </option>
<state>0</state> <option>
</option> <name>IlinkOptUseVfe</name>
<option> <state>1</state>
<name>IlinkOptUseVfe</name> </option>
<state>1</state> <option>
</option> <name>IlinkOptForceVfe</name>
<option> <state>0</state>
<name>IlinkOptForceVfe</name> </option>
<state>0</state> <option>
</option> <name>IlinkStackAnalysisEnable</name>
<option> <state>0</state>
<name>IlinkStackAnalysisEnable</name> </option>
<state>0</state> <option>
</option> <name>IlinkStackControlFile</name>
<option> <state />
<name>IlinkStackControlFile</name> </option>
<state></state> <option>
</option> <name>IlinkStackCallGraphFile</name>
<option> <state />
<name>IlinkStackCallGraphFile</name> </option>
<state></state> <option>
</option> <name>CrcAlgorithm</name>
<option> <version>1</version>
<name>CrcAlgorithm</name> <state>1</state>
<version>1</version> </option>
<state>1</state> <option>
</option> <name>CrcUnitSize</name>
<option> <version>0</version>
<name>CrcUnitSize</name> <state>0</state>
<version>0</version> </option>
<state>0</state> <option>
</option> <name>IlinkThreadsSlave</name>
<option> <state>1</state>
<name>IlinkThreadsSlave</name> </option>
<state>1</state> <option>
</option> <name>IlinkLogCallGraph</name>
<option> <state>0</state>
<name>IlinkLogCallGraph</name> </option>
<state>0</state> <option>
</option> <name>IlinkIcfFile_AltDefault</name>
<option> <state />
<name>IlinkIcfFile_AltDefault</name> </option>
<state></state> <option>
</option> <name>IlinkEncInput</name>
<option> <state>0</state>
<name>IlinkEncInput</name> </option>
<state>0</state> <option>
</option> <name>IlinkEncOutput</name>
<option> <state>0</state>
<name>IlinkEncOutput</name> </option>
<state>0</state> <option>
</option> <name>IlinkEncOutputBom</name>
<option> <state>1</state>
<name>IlinkEncOutputBom</name> </option>
<state>1</state> <option>
</option> <name>IlinkHeapSelect</name>
<option> <state>1</state>
<name>IlinkHeapSelect</name> </option>
<state>1</state> <option>
</option> <name>IlinkLocaleSelect</name>
<option> <state>1</state>
<name>IlinkLocaleSelect</name> </option>
<state>1</state> </data>
</option> </settings>
</data> <settings>
</settings> <name>IARCHIVE</name>
<settings> <archiveVersion>0</archiveVersion>
<name>IARCHIVE</name> <data>
<archiveVersion>0</archiveVersion> <version>0</version>
<data> <wantNonLocal>1</wantNonLocal>
<version>0</version> <debug>1</debug>
<wantNonLocal>1</wantNonLocal> <option>
<debug>1</debug> <name>IarchiveInputs</name>
<option> <state />
<name>IarchiveInputs</name> </option>
<state></state> <option>
</option> <name>IarchiveOverride</name>
<option> <state>0</state>
<name>IarchiveOverride</name> </option>
<state>0</state> <option>
</option> <name>IarchiveOutput</name>
<option> <state>###Unitialized###</state>
<name>IarchiveOutput</name> </option>
<state>###Unitialized###</state> </data>
</option> </settings>
</data> <settings>
</settings> <name>BILINK</name>
<settings> <archiveVersion>0</archiveVersion>
<name>BILINK</name> <data />
<archiveVersion>0</archiveVersion> </settings>
<data /> </configuration>
</settings> <configuration>
</configuration> <name>Release</name>
<configuration> <toolchain>
<name>Release</name> <name>ARM</name>
<toolchain> </toolchain>
<name>ARM</name> <debug>0</debug>
</toolchain> <settings>
<name>General</name>
<archiveVersion>3</archiveVersion>
<data>
<version>29</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>ExePath</name>
<state>Release\Exe</state>
</option>
<option>
<name>ObjPath</name>
<state>Release\Obj</state>
</option>
<option>
<name>ListPath</name>
<state>Release\List</state>
</option>
<option>
<name>GEndianMode</name>
<state>0</state>
</option>
<option>
<name>Input description</name>
<state />
</option>
<option>
<name>Output description</name>
<state />
</option>
<option>
<name>GOutputBinary</name>
<state>0</state>
</option>
<option>
<name>OGCoreOrChip</name>
<state>0</state>
</option>
<option>
<name>GRuntimeLibSelect</name>
<version>0</version>
<state>1</state>
</option>
<option>
<name>GRuntimeLibSelectSlave</name>
<version>0</version>
<state>1</state>
</option>
<option>
<name>RTDescription</name>
<state />
</option>
<option>
<name>OGProductVersion</name>
<state>6.30.6.53380</state>
</option>
<option>
<name>OGLastSavedByProductVersion</name>
<state>8.11.3.13977</state>
</option>
<option>
<name>GeneralEnableMisra</name>
<state>0</state>
</option>
<option>
<name>GeneralMisraVerbose</name>
<state>0</state>
</option>
<option>
<name>OGChipSelectEditMenu</name>
<state>Default None</state>
</option>
<option>
<name>GenLowLevelInterface</name>
<state>0</state>
</option>
<option>
<name>GEndianModeBE</name>
<state>0</state>
</option>
<option>
<name>OGBufferedTerminalOutput</name>
<state>0</state>
</option>
<option>
<name>GenStdoutInterface</name>
<state>0</state>
</option>
<option>
<name>GeneralMisraRules98</name>
<version>0</version>
<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
</option>
<option>
<name>GeneralMisraVer</name>
<state>0</state>
</option>
<option>
<name>GeneralMisraRules04</name>
<version>0</version>
<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
</option>
<option>
<name>RTConfigPath2</name>
<state />
</option>
<option>
<name>GBECoreSlave</name>
<version>25</version>
<state>1</state>
</option>
<option>
<name>OGUseCmsis</name>
<state>0</state>
</option>
<option>
<name>OGUseCmsisDspLib</name>
<state>0</state>
</option>
<option>
<name>GRuntimeLibThreads</name>
<state>0</state>
</option>
<option>
<name>CoreVariant</name>
<version>25</version>
<state>0</state>
</option>
<option>
<name>GFPUDeviceSlave</name>
<state>Default None</state>
</option>
<option>
<name>FPU2</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>NrRegs</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>NEON</name>
<state>0</state>
</option>
<option>
<name>GFPUCoreSlave2</name>
<version>25</version>
<state>0</state>
</option>
<option>
<name>OGCMSISPackSelectDevice</name>
</option>
<option>
<name>OgLibHeap</name>
<state>0</state>
</option>
<option>
<name>OGLibAdditionalLocale</name>
<state>0</state>
</option>
<option>
<name>OGPrintfVariant</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>OGPrintfMultibyteSupport</name>
<state>0</state>
</option>
<option>
<name>OGScanfVariant</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>OGScanfMultibyteSupport</name>
<state>0</state>
</option>
<option>
<name>GenLocaleTags</name>
<state />
</option>
<option>
<name>GenLocaleDisplayOnly</name>
<state />
</option>
<option>
<name>DSPExtension</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>ICCARM</name>
<archiveVersion>2</archiveVersion>
<data>
<version>34</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>CCOptimizationNoSizeConstraints</name>
<state>0</state>
</option>
<option>
<name>CCDefines</name>
<state>STM32L476xx</state>
<state>RT_USING_DLIBC</state>
<state>USE_HAL_DRIVER</state>
</option>
<option>
<name>CCPreprocFile</name>
<state>0</state>
</option>
<option>
<name>CCPreprocComments</name>
<state>0</state>
</option>
<option>
<name>CCPreprocLine</name>
<state>0</state>
</option>
<option>
<name>CCListCFile</name>
<state>0</state>
</option>
<option>
<name>CCListCMnemonics</name>
<state>0</state>
</option>
<option>
<name>CCListCMessages</name>
<state>0</state>
</option>
<option>
<name>CCListAssFile</name>
<state>0</state>
</option>
<option>
<name>CCListAssSource</name>
<state>0</state>
</option>
<option>
<name>CCEnableRemarks</name>
<state>0</state>
</option>
<option>
<name>CCDiagSuppress</name>
<state />
</option>
<option>
<name>CCDiagRemark</name>
<state />
</option>
<option>
<name>CCDiagWarning</name>
<state />
</option>
<option>
<name>CCDiagError</name>
<state />
</option>
<option>
<name>CCObjPrefix</name>
<state>1</state>
</option>
<option>
<name>CCAllowList</name>
<version>1</version>
<state>11111110</state>
</option>
<option>
<name>CCDebugInfo</name>
<state>0</state>
</option>
<option>
<name>IEndianMode</name>
<state>1</state>
</option>
<option>
<name>IProcessor</name>
<state>1</state>
</option>
<option>
<name>IExtraOptionsCheck</name>
<state>0</state>
</option>
<option>
<name>IExtraOptions</name>
<state />
</option>
<option>
<name>CCLangConformance</name>
<state>0</state>
</option>
<option>
<name>CCSignedPlainChar</name>
<state>1</state>
</option>
<option>
<name>CCRequirePrototypes</name>
<state>0</state>
</option>
<option>
<name>CCDiagWarnAreErr</name>
<state>0</state>
</option>
<option>
<name>CCCompilerRuntimeInfo</name>
<state>0</state>
</option>
<option>
<name>IFpuProcessor</name>
<state>1</state>
</option>
<option>
<name>OutputFile</name>
<state />
</option>
<option>
<name>CCLibConfigHeader</name>
<state>1</state>
</option>
<option>
<name>PreInclude</name>
<state />
</option>
<option>
<name>CompilerMisraOverride</name>
<state>0</state>
</option>
<option>
<name>CCIncludePath2</name>
<state />
<state>$PROJ_DIR$\..\..\..\components\finsh</state>
<state>$PROJ_DIR$\..\..\..\libcpu\arm\common</state>
<state>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4</state>
<state>$PROJ_DIR$\board\ports</state>
<state>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Include</state>
<state>$PROJ_DIR$\..\..\..\components\drivers\include</state>
<state>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Include</state>
<state>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Inc</state>
<state>$PROJ_DIR$\.</state>
<state>$PROJ_DIR$\applications</state>
<state>$PROJ_DIR$\..\libraries\HAL_Drivers\config</state>
<state>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib</state>
<state>$PROJ_DIR$\board</state>
<state>$PROJ_DIR$\..\..\..\components\libc\compilers\common</state>
<state>$PROJ_DIR$\board\CubeMX_Config\Inc</state>
<state>$PROJ_DIR$\..\..\..\include</state>
<state>$PROJ_DIR$\..\libraries\HAL_Drivers</state>
</option>
<option>
<name>CCStdIncCheck</name>
<state>0</state>
</option>
<option>
<name>CCCodeSection</name>
<state>.text</state>
</option>
<option>
<name>IProcessorMode2</name>
<state>1</state>
</option>
<option>
<name>CCOptLevel</name>
<state>3</state>
</option>
<option>
<name>CCOptStrategy</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CCOptLevelSlave</name>
<state>1</state>
</option>
<option>
<name>CompilerMisraRules98</name>
<version>0</version>
<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
</option>
<option>
<name>CompilerMisraRules04</name>
<version>0</version>
<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
</option>
<option>
<name>CCPosIndRopi</name>
<state>0</state>
</option>
<option>
<name>CCPosIndRwpi</name>
<state>0</state>
</option>
<option>
<name>CCPosIndNoDynInit</name>
<state>0</state>
</option>
<option>
<name>IccLang</name>
<state>0</state>
</option>
<option>
<name>IccCDialect</name>
<state>1</state>
</option>
<option>
<name>IccAllowVLA</name>
<state>0</state>
</option>
<option>
<name>IccStaticDestr</name>
<state>1</state>
</option>
<option>
<name>IccCppInlineSemantics</name>
<state>0</state>
</option>
<option>
<name>IccCmsis</name>
<state>1</state>
</option>
<option>
<name>IccFloatSemantics</name>
<state>0</state>
</option>
<option>
<name>CCNoLiteralPool</name>
<state>0</state>
</option>
<option>
<name>CCOptStrategySlave</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CCGuardCalls</name>
<state>1</state>
</option>
<option>
<name>CCEncSource</name>
<state>0</state>
</option>
<option>
<name>CCEncOutput</name>
<state>0</state>
</option>
<option>
<name>CCEncOutputBom</name>
<state>1</state>
</option>
<option>
<name>CCEncInput</name>
<state>0</state>
</option>
<option>
<name>IccExceptions2</name>
<state>0</state>
</option>
<option>
<name>IccRTTI2</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>AARM</name>
<archiveVersion>2</archiveVersion>
<data>
<version>10</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>AObjPrefix</name>
<state>1</state>
</option>
<option>
<name>AEndian</name>
<state>1</state>
</option>
<option>
<name>ACaseSensitivity</name>
<state>1</state>
</option>
<option>
<name>MacroChars</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>AWarnEnable</name>
<state>0</state>
</option>
<option>
<name>AWarnWhat</name>
<state>0</state>
</option>
<option>
<name>AWarnOne</name>
<state />
</option>
<option>
<name>AWarnRange1</name>
<state />
</option>
<option>
<name>AWarnRange2</name>
<state />
</option>
<option>
<name>ADebug</name>
<state>0</state>
</option>
<option>
<name>AltRegisterNames</name>
<state>0</state>
</option>
<option>
<name>ADefines</name>
<state />
</option>
<option>
<name>AList</name>
<state>0</state>
</option>
<option>
<name>AListHeader</name>
<state>1</state>
</option>
<option>
<name>AListing</name>
<state>1</state>
</option>
<option>
<name>Includes</name>
<state>0</state>
</option>
<option>
<name>MacDefs</name>
<state>0</state>
</option>
<option>
<name>MacExps</name>
<state>1</state>
</option>
<option>
<name>MacExec</name>
<state>0</state>
</option>
<option>
<name>OnlyAssed</name>
<state>0</state>
</option>
<option>
<name>MultiLine</name>
<state>0</state>
</option>
<option>
<name>PageLengthCheck</name>
<state>0</state>
</option>
<option>
<name>PageLength</name>
<state>80</state>
</option>
<option>
<name>TabSpacing</name>
<state>8</state>
</option>
<option>
<name>AXRef</name>
<state>0</state>
</option>
<option>
<name>AXRefDefines</name>
<state>0</state>
</option>
<option>
<name>AXRefInternal</name>
<state>0</state>
</option>
<option>
<name>AXRefDual</name>
<state>0</state>
</option>
<option>
<name>AProcessor</name>
<state>1</state>
</option>
<option>
<name>AFpuProcessor</name>
<state>1</state>
</option>
<option>
<name>AOutputFile</name>
<state />
</option>
<option>
<name>ALimitErrorsCheck</name>
<state>0</state>
</option>
<option>
<name>ALimitErrorsEdit</name>
<state>100</state>
</option>
<option>
<name>AIgnoreStdInclude</name>
<state>0</state>
</option>
<option>
<name>AUserIncludes</name>
<state />
</option>
<option>
<name>AExtraOptionsCheckV2</name>
<state>0</state>
</option>
<option>
<name>AExtraOptionsV2</name>
<state />
</option>
<option>
<name>AsmNoLiteralPool</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>OBJCOPY</name>
<archiveVersion>0</archiveVersion>
<data>
<version>1</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>OOCOutputFormat</name>
<version>3</version>
<state>0</state>
</option>
<option>
<name>OCOutputOverride</name>
<state>0</state>
</option>
<option>
<name>OOCOutputFile</name>
<state />
</option>
<option>
<name>OOCCommandLineProducer</name>
<state>1</state>
</option>
<option>
<name>OOCObjCopyEnable</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>CUSTOM</name>
<archiveVersion>3</archiveVersion>
<data>
<extensions />
<cmdline />
<hasPrio>0</hasPrio>
</data>
</settings>
<settings>
<name>BICOMP</name>
<archiveVersion>0</archiveVersion>
<data />
</settings>
<settings>
<name>BUILDACTION</name>
<archiveVersion>1</archiveVersion>
<data>
<prebuild />
<postbuild />
</data>
</settings>
<settings>
<name>ILINK</name>
<archiveVersion>0</archiveVersion>
<data>
<version>20</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>IlinkLibIOConfig</name>
<state>1</state>
</option>
<option>
<name>XLinkMisraHandler</name>
<state>0</state>
</option>
<option>
<name>IlinkInputFileSlave</name>
<state>0</state>
</option>
<option>
<name>IlinkOutputFile</name>
<state>###Unitialized###</state>
</option>
<option>
<name>IlinkDebugInfoEnable</name>
<state>1</state>
</option>
<option>
<name>IlinkKeepSymbols</name>
<state />
</option>
<option>
<name>IlinkRawBinaryFile</name>
<state />
</option>
<option>
<name>IlinkRawBinarySymbol</name>
<state />
</option>
<option>
<name>IlinkRawBinarySegment</name>
<state />
</option>
<option>
<name>IlinkRawBinaryAlign</name>
<state />
</option>
<option>
<name>IlinkDefines</name>
<state />
</option>
<option>
<name>IlinkConfigDefines</name>
<state />
</option>
<option>
<name>IlinkMapFile</name>
<state>0</state>
</option>
<option>
<name>IlinkLogFile</name>
<state>0</state>
</option>
<option>
<name>IlinkLogInitialization</name>
<state>0</state>
</option>
<option>
<name>IlinkLogModule</name>
<state>0</state>
</option>
<option>
<name>IlinkLogSection</name>
<state>0</state>
</option>
<option>
<name>IlinkLogVeneer</name>
<state>0</state>
</option>
<option>
<name>IlinkIcfOverride</name>
<state>0</state>
</option>
<option>
<name>IlinkIcfFile</name>
<state>lnk0t.icf</state>
</option>
<option>
<name>IlinkIcfFileSlave</name>
<state />
</option>
<option>
<name>IlinkEnableRemarks</name>
<state>0</state>
</option>
<option>
<name>IlinkSuppressDiags</name>
<state />
</option>
<option>
<name>IlinkTreatAsRem</name>
<state />
</option>
<option>
<name>IlinkTreatAsWarn</name>
<state />
</option>
<option>
<name>IlinkTreatAsErr</name>
<state />
</option>
<option>
<name>IlinkWarningsAreErrors</name>
<state>0</state>
</option>
<option>
<name>IlinkUseExtraOptions</name>
<state>0</state>
</option>
<option>
<name>IlinkExtraOptions</name>
<state />
</option>
<option>
<name>IlinkLowLevelInterfaceSlave</name>
<state>1</state>
</option>
<option>
<name>IlinkAutoLibEnable</name>
<state>1</state>
</option>
<option>
<name>IlinkAdditionalLibs</name>
<state />
</option>
<option>
<name>IlinkOverrideProgramEntryLabel</name>
<state>0</state>
</option>
<option>
<name>IlinkProgramEntryLabelSelect</name>
<state>0</state>
</option>
<option>
<name>IlinkProgramEntryLabel</name>
<state />
</option>
<option>
<name>DoFill</name>
<state>0</state>
</option>
<option>
<name>FillerByte</name>
<state>0xFF</state>
</option>
<option>
<name>FillerStart</name>
<state>0x0</state>
</option>
<option>
<name>FillerEnd</name>
<state>0x0</state>
</option>
<option>
<name>CrcSize</name>
<version>0</version>
<state>1</state>
</option>
<option>
<name>CrcAlign</name>
<state>1</state>
</option>
<option>
<name>CrcPoly</name>
<state>0x11021</state>
</option>
<option>
<name>CrcCompl</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CrcBitOrder</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CrcInitialValue</name>
<state>0x0</state>
</option>
<option>
<name>DoCrc</name>
<state>0</state>
</option>
<option>
<name>IlinkBE8Slave</name>
<state>1</state>
</option>
<option>
<name>IlinkBufferedTerminalOutput</name>
<state>1</state>
</option>
<option>
<name>IlinkStdoutInterfaceSlave</name>
<state>1</state>
</option>
<option>
<name>CrcFullSize</name>
<state>0</state>
</option>
<option>
<name>IlinkIElfToolPostProcess</name>
<state>0</state>
</option>
<option>
<name>IlinkLogAutoLibSelect</name>
<state>0</state>
</option>
<option>
<name>IlinkLogRedirSymbols</name>
<state>0</state>
</option>
<option>
<name>IlinkLogUnusedFragments</name>
<state>0</state>
</option>
<option>
<name>IlinkCrcReverseByteOrder</name>
<state>0</state>
</option>
<option>
<name>IlinkCrcUseAsInput</name>
<state>1</state>
</option>
<option>
<name>IlinkOptInline</name>
<state>1</state>
</option>
<option>
<name>IlinkOptExceptionsAllow</name>
<state>1</state>
</option>
<option>
<name>IlinkOptExceptionsForce</name>
<state>0</state>
</option>
<option>
<name>IlinkCmsis</name>
<state>1</state>
</option>
<option>
<name>IlinkOptMergeDuplSections</name>
<state>0</state>
</option>
<option>
<name>IlinkOptUseVfe</name>
<state>1</state>
</option>
<option>
<name>IlinkOptForceVfe</name>
<state>0</state>
</option>
<option>
<name>IlinkStackAnalysisEnable</name>
<state>0</state>
</option>
<option>
<name>IlinkStackControlFile</name>
<state />
</option>
<option>
<name>IlinkStackCallGraphFile</name>
<state />
</option>
<option>
<name>CrcAlgorithm</name>
<version>1</version>
<state>1</state>
</option>
<option>
<name>CrcUnitSize</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>IlinkThreadsSlave</name>
<state>1</state>
</option>
<option>
<name>IlinkLogCallGraph</name>
<state>0</state>
</option>
<option>
<name>IlinkIcfFile_AltDefault</name>
<state />
</option>
<option>
<name>IlinkEncInput</name>
<state>0</state>
</option>
<option>
<name>IlinkEncOutput</name>
<state>0</state>
</option>
<option>
<name>IlinkEncOutputBom</name>
<state>1</state>
</option>
<option>
<name>IlinkHeapSelect</name>
<state>1</state>
</option>
<option>
<name>IlinkLocaleSelect</name>
<state>1</state>
</option>
</data>
</settings>
<settings>
<name>IARCHIVE</name>
<archiveVersion>0</archiveVersion>
<data>
<version>0</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug> <debug>0</debug>
<settings> <option>
<name>General</name> <name>IarchiveInputs</name>
<archiveVersion>3</archiveVersion> <state />
<data> </option>
<version>29</version> <option>
<wantNonLocal>1</wantNonLocal> <name>IarchiveOverride</name>
<debug>0</debug> <state>0</state>
<option> </option>
<name>ExePath</name> <option>
<state>Release\Exe</state> <name>IarchiveOutput</name>
</option> <state>###Unitialized###</state>
<option> </option>
<name>ObjPath</name> </data>
<state>Release\Obj</state> </settings>
</option> <settings>
<option> <name>BILINK</name>
<name>ListPath</name> <archiveVersion>0</archiveVersion>
<state>Release\List</state> <data />
</option> </settings>
<option> </configuration>
<name>GEndianMode</name> <group>
<state>0</state> <name>Kernel</name>
</option> <file>
<option> <name>$PROJ_DIR$\..\..\..\src\clock.c</name>
<name>Input description</name> </file>
<state></state> <file>
</option> <name>$PROJ_DIR$\..\..\..\src\components.c</name>
<option> </file>
<name>Output description</name> <file>
<state></state> <name>$PROJ_DIR$\..\..\..\src\cpu.c</name>
</option> </file>
<option> <file>
<name>GOutputBinary</name> <name>$PROJ_DIR$\..\..\..\src\device.c</name>
<state>0</state> </file>
</option> <file>
<option> <name>$PROJ_DIR$\..\..\..\src\idle.c</name>
<name>OGCoreOrChip</name> </file>
<state>0</state> <file>
</option> <name>$PROJ_DIR$\..\..\..\src\ipc.c</name>
<option> </file>
<name>GRuntimeLibSelect</name> <file>
<version>0</version> <name>$PROJ_DIR$\..\..\..\src\irq.c</name>
<state>1</state> </file>
</option> <file>
<option> <name>$PROJ_DIR$\..\..\..\src\kservice.c</name>
<name>GRuntimeLibSelectSlave</name> </file>
<version>0</version> <file>
<state>1</state> <name>$PROJ_DIR$\..\..\..\src\mem.c</name>
</option> </file>
<option> <file>
<name>RTDescription</name> <name>$PROJ_DIR$\..\..\..\src\mempool.c</name>
<state></state> </file>
</option> <file>
<option> <name>$PROJ_DIR$\..\..\..\src\object.c</name>
<name>OGProductVersion</name> </file>
<state>6.30.6.53380</state> <file>
</option> <name>$PROJ_DIR$\..\..\..\src\scheduler.c</name>
<option> </file>
<name>OGLastSavedByProductVersion</name> <file>
<state>8.11.3.13977</state> <name>$PROJ_DIR$\..\..\..\src\signal.c</name>
</option> </file>
<option> <file>
<name>GeneralEnableMisra</name> <name>$PROJ_DIR$\..\..\..\src\thread.c</name>
<state>0</state> </file>
</option> <file>
<option> <name>$PROJ_DIR$\..\..\..\src\timer.c</name>
<name>GeneralMisraVerbose</name> </file>
<state>0</state> </group>
</option> <group>
<option> <name>Applications</name>
<name>OGChipSelectEditMenu</name> <file>
<state>Default None</state> <name>$PROJ_DIR$\applications\main.c</name>
</option> </file>
<option> </group>
<name>GenLowLevelInterface</name> <group>
<state>0</state> <name>Drivers</name>
</option> <file>
<option> <name>$PROJ_DIR$\board\board.c</name>
<name>GEndianModeBE</name> </file>
<state>0</state> <file>
</option> <name>$PROJ_DIR$\board\CubeMX_Config\Src\stm32l4xx_hal_msp.c</name>
<option> </file>
<name>OGBufferedTerminalOutput</name> <file>
<state>0</state> <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Source\Templates\iar\startup_stm32l476xx.s</name>
</option> </file>
<option> <file>
<name>GenStdoutInterface</name> <name>$PROJ_DIR$\..\libraries\HAL_Drivers\drv_gpio.c</name>
<state>0</state> </file>
</option> <file>
<option> <name>$PROJ_DIR$\..\libraries\HAL_Drivers\drv_usart.c</name>
<name>GeneralMisraRules98</name> </file>
<version>0</version> <file>
<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state> <name>$PROJ_DIR$\..\libraries\HAL_Drivers\drv_common.c</name>
</option> </file>
<option> </group>
<name>GeneralMisraVer</name> <group>
<state>0</state> <name>cpu</name>
</option> <file>
<option> <name>$PROJ_DIR$\..\..\..\libcpu\arm\common\backtrace.c</name>
<name>GeneralMisraRules04</name> </file>
<version>0</version> <file>
<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state> <name>$PROJ_DIR$\..\..\..\libcpu\arm\common\div0.c</name>
</option> </file>
<option> <file>
<name>RTConfigPath2</name> <name>$PROJ_DIR$\..\..\..\libcpu\arm\common\showmem.c</name>
<state></state> </file>
</option> <file>
<option> <name>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4\cpuport.c</name>
<name>GBECoreSlave</name> </file>
<version>25</version> <file>
<state>1</state> <name>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4\context_iar.S</name>
</option> </file>
<option> </group>
<name>OGUseCmsis</name> <group>
<state>0</state> <name>DeviceDrivers</name>
</option> <file>
<option> <name>$PROJ_DIR$\..\..\..\components\drivers\misc\pin.c</name>
<name>OGUseCmsisDspLib</name> </file>
<state>0</state> <file>
</option> <name>$PROJ_DIR$\..\..\..\components\drivers\serial\serial.c</name>
<option> </file>
<name>GRuntimeLibThreads</name> <file>
<state>0</state> <name>$PROJ_DIR$\..\..\..\components\drivers\src\completion.c</name>
</option> </file>
<option> <file>
<name>CoreVariant</name> <name>$PROJ_DIR$\..\..\..\components\drivers\src\dataqueue.c</name>
<version>25</version> </file>
<state>0</state> <file>
</option> <name>$PROJ_DIR$\..\..\..\components\drivers\src\pipe.c</name>
<option> </file>
<name>GFPUDeviceSlave</name> <file>
<state>Default None</state> <name>$PROJ_DIR$\..\..\..\components\drivers\src\ringblk_buf.c</name>
</option> </file>
<option> <file>
<name>FPU2</name> <name>$PROJ_DIR$\..\..\..\components\drivers\src\ringbuffer.c</name>
<version>0</version> </file>
<state>0</state> <file>
</option> <name>$PROJ_DIR$\..\..\..\components\drivers\src\waitqueue.c</name>
<option> </file>
<name>NrRegs</name> <file>
<version>0</version> <name>$PROJ_DIR$\..\..\..\components\drivers\src\workqueue.c</name>
<state>0</state> </file>
</option> </group>
<option> <group>
<name>NEON</name> <name>finsh</name>
<state>0</state> <file>
</option> <name>$PROJ_DIR$\..\..\..\components\finsh\shell.c</name>
<option> </file>
<name>GFPUCoreSlave2</name> <file>
<version>25</version> <name>$PROJ_DIR$\..\..\..\components\finsh\symbol.c</name>
<state>0</state> </file>
</option> <file>
<option> <name>$PROJ_DIR$\..\..\..\components\finsh\cmd.c</name>
<name>OGCMSISPackSelectDevice</name> </file>
</option> <file>
<option> <name>$PROJ_DIR$\..\..\..\components\finsh\msh.c</name>
<name>OgLibHeap</name> </file>
<state>0</state> <file>
</option> <name>$PROJ_DIR$\..\..\..\components\finsh\msh_cmd.c</name>
<option> </file>
<name>OGLibAdditionalLocale</name> <file>
<state>0</state> <name>$PROJ_DIR$\..\..\..\components\finsh\msh_file.c</name>
</option> </file>
<option> </group>
<name>OGPrintfVariant</name> <group>
<version>0</version> <name>libc</name>
<state>0</state> <file>
</option> <name>$PROJ_DIR$\..\..\..\components\libc\compilers\common\gmtime_r.c</name>
<option> </file>
<name>OGPrintfMultibyteSupport</name> </group>
<state>0</state> <group>
</option> <name>dlib</name>
<option> <file>
<name>OGScanfVariant</name> <name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\environ.c</name>
<version>0</version> </file>
<state>0</state> <file>
</option> <name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\libc.c</name>
<option> </file>
<name>OGScanfMultibyteSupport</name> <file>
<state>0</state> <name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\rmtx.c</name>
</option> </file>
<option> <file>
<name>GenLocaleTags</name> <name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\stdio.c</name>
<state></state> </file>
</option> <file>
<option> <name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_close.c</name>
<name>GenLocaleDisplayOnly</name> </file>
<state></state> <file>
</option> <name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_lseek.c</name>
<option> </file>
<name>DSPExtension</name> <file>
<state>0</state> <name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_mem.c</name>
</option> </file>
</data> <file>
</settings> <name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_open.c</name>
<settings> </file>
<name>ICCARM</name> <file>
<archiveVersion>2</archiveVersion> <name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_read.c</name>
<data> </file>
<version>34</version> <file>
<wantNonLocal>1</wantNonLocal> <name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_remove.c</name>
<debug>0</debug> </file>
<option> <file>
<name>CCOptimizationNoSizeConstraints</name> <name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_write.c</name>
<state>0</state> </file>
</option> <file>
<option> <name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\time.c</name>
<name>CCDefines</name> </file>
<state>STM32L476xx</state> </group>
<state>USE_HAL_DRIVER</state> <group>
</option> <name>STM32_HAL</name>
<option> <file>
<name>CCPreprocFile</name> <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Source\Templates\system_stm32l4xx.c</name>
<state>0</state> </file>
</option> <file>
<option> <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c</name>
<name>CCPreprocComments</name> </file>
<state>0</state> <file>
</option> <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_comp.c</name>
<option> </file>
<name>CCPreprocLine</name> <file>
<state>0</state> <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c</name>
</option> </file>
<option> <file>
<name>CCListCFile</name> <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_crc.c</name>
<state>0</state> </file>
</option> <file>
<option> <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_crc_ex.c</name>
<name>CCListCMnemonics</name> </file>
<state>0</state> <file>
</option> <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cryp.c</name>
<option> </file>
<name>CCListCMessages</name> <file>
<state>0</state> <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cryp_ex.c</name>
</option> </file>
<option> <file>
<name>CCListAssFile</name> <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c</name>
<state>0</state> </file>
</option> <file>
<option> <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c</name>
<name>CCListAssSource</name> </file>
<state>0</state> <file>
</option> <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c</name>
<option> </file>
<name>CCEnableRemarks</name> <file>
<state>0</state> <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c</name>
</option> </file>
<option> <file>
<name>CCDiagSuppress</name> <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c</name>
<state></state> </file>
</option> <file>
<option> <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c</name>
<name>CCDiagRemark</name> </file>
<state></state> <file>
</option> <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c</name>
<option> </file>
<name>CCDiagWarning</name> <file>
<state></state> <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rng.c</name>
</option> </file>
<option> <file>
<name>CCDiagError</name> <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_sram.c</name>
<state></state> </file>
</option> <file>
<option> <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c</name>
<name>CCObjPrefix</name> </file>
<state>1</state> <file>
</option> <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c</name>
<option> </file>
<name>CCAllowList</name> <file>
<version>1</version> <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c</name>
<state>11111110</state> </file>
</option> <file>
<option> <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart.c</name>
<name>CCDebugInfo</name> </file>
<state>0</state> <file>
</option> <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart_ex.c</name>
<option> </file>
<name>IEndianMode</name> </group>
<state>1</state>
</option>
<option>
<name>IProcessor</name>
<state>1</state>
</option>
<option>
<name>IExtraOptionsCheck</name>
<state>0</state>
</option>
<option>
<name>IExtraOptions</name>
<state></state>
</option>
<option>
<name>CCLangConformance</name>
<state>0</state>
</option>
<option>
<name>CCSignedPlainChar</name>
<state>1</state>
</option>
<option>
<name>CCRequirePrototypes</name>
<state>0</state>
</option>
<option>
<name>CCDiagWarnAreErr</name>
<state>0</state>
</option>
<option>
<name>CCCompilerRuntimeInfo</name>
<state>0</state>
</option>
<option>
<name>IFpuProcessor</name>
<state>1</state>
</option>
<option>
<name>OutputFile</name>
<state></state>
</option>
<option>
<name>CCLibConfigHeader</name>
<state>1</state>
</option>
<option>
<name>PreInclude</name>
<state></state>
</option>
<option>
<name>CompilerMisraOverride</name>
<state>0</state>
</option>
<option>
<name>CCIncludePath2</name>
<state>$PROJ_DIR$\..\..\..\components\finsh</state>
<state>$PROJ_DIR$\..\..\..\libcpu\arm\common</state>
<state>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4</state>
<state>$PROJ_DIR$\board\ports</state>
<state>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Include</state>
<state>$PROJ_DIR$\..\..\..\components\drivers\include</state>
<state>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Include</state>
<state>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Inc</state>
<state>$PROJ_DIR$\.</state>
<state>$PROJ_DIR$\applications</state>
<state>$PROJ_DIR$\..\libraries\HAL_Drivers\config</state>
<state>$PROJ_DIR$\board</state>
<state>$PROJ_DIR$\board\CubeMX_Config\Inc</state>
<state>$PROJ_DIR$\..\..\..\include</state>
<state>$PROJ_DIR$\..\libraries\HAL_Drivers</state>
</option>
<option>
<name>CCStdIncCheck</name>
<state>0</state>
</option>
<option>
<name>CCCodeSection</name>
<state>.text</state>
</option>
<option>
<name>IProcessorMode2</name>
<state>1</state>
</option>
<option>
<name>CCOptLevel</name>
<state>3</state>
</option>
<option>
<name>CCOptStrategy</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CCOptLevelSlave</name>
<state>1</state>
</option>
<option>
<name>CompilerMisraRules98</name>
<version>0</version>
<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
</option>
<option>
<name>CompilerMisraRules04</name>
<version>0</version>
<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
</option>
<option>
<name>CCPosIndRopi</name>
<state>0</state>
</option>
<option>
<name>CCPosIndRwpi</name>
<state>0</state>
</option>
<option>
<name>CCPosIndNoDynInit</name>
<state>0</state>
</option>
<option>
<name>IccLang</name>
<state>0</state>
</option>
<option>
<name>IccCDialect</name>
<state>1</state>
</option>
<option>
<name>IccAllowVLA</name>
<state>0</state>
</option>
<option>
<name>IccStaticDestr</name>
<state>1</state>
</option>
<option>
<name>IccCppInlineSemantics</name>
<state>0</state>
</option>
<option>
<name>IccCmsis</name>
<state>1</state>
</option>
<option>
<name>IccFloatSemantics</name>
<state>0</state>
</option>
<option>
<name>CCNoLiteralPool</name>
<state>0</state>
</option>
<option>
<name>CCOptStrategySlave</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CCGuardCalls</name>
<state>1</state>
</option>
<option>
<name>CCEncSource</name>
<state>0</state>
</option>
<option>
<name>CCEncOutput</name>
<state>0</state>
</option>
<option>
<name>CCEncOutputBom</name>
<state>1</state>
</option>
<option>
<name>CCEncInput</name>
<state>0</state>
</option>
<option>
<name>IccExceptions2</name>
<state>0</state>
</option>
<option>
<name>IccRTTI2</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>AARM</name>
<archiveVersion>2</archiveVersion>
<data>
<version>10</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>AObjPrefix</name>
<state>1</state>
</option>
<option>
<name>AEndian</name>
<state>1</state>
</option>
<option>
<name>ACaseSensitivity</name>
<state>1</state>
</option>
<option>
<name>MacroChars</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>AWarnEnable</name>
<state>0</state>
</option>
<option>
<name>AWarnWhat</name>
<state>0</state>
</option>
<option>
<name>AWarnOne</name>
<state></state>
</option>
<option>
<name>AWarnRange1</name>
<state></state>
</option>
<option>
<name>AWarnRange2</name>
<state></state>
</option>
<option>
<name>ADebug</name>
<state>0</state>
</option>
<option>
<name>AltRegisterNames</name>
<state>0</state>
</option>
<option>
<name>ADefines</name>
<state></state>
</option>
<option>
<name>AList</name>
<state>0</state>
</option>
<option>
<name>AListHeader</name>
<state>1</state>
</option>
<option>
<name>AListing</name>
<state>1</state>
</option>
<option>
<name>Includes</name>
<state>0</state>
</option>
<option>
<name>MacDefs</name>
<state>0</state>
</option>
<option>
<name>MacExps</name>
<state>1</state>
</option>
<option>
<name>MacExec</name>
<state>0</state>
</option>
<option>
<name>OnlyAssed</name>
<state>0</state>
</option>
<option>
<name>MultiLine</name>
<state>0</state>
</option>
<option>
<name>PageLengthCheck</name>
<state>0</state>
</option>
<option>
<name>PageLength</name>
<state>80</state>
</option>
<option>
<name>TabSpacing</name>
<state>8</state>
</option>
<option>
<name>AXRef</name>
<state>0</state>
</option>
<option>
<name>AXRefDefines</name>
<state>0</state>
</option>
<option>
<name>AXRefInternal</name>
<state>0</state>
</option>
<option>
<name>AXRefDual</name>
<state>0</state>
</option>
<option>
<name>AProcessor</name>
<state>1</state>
</option>
<option>
<name>AFpuProcessor</name>
<state>1</state>
</option>
<option>
<name>AOutputFile</name>
<state></state>
</option>
<option>
<name>ALimitErrorsCheck</name>
<state>0</state>
</option>
<option>
<name>ALimitErrorsEdit</name>
<state>100</state>
</option>
<option>
<name>AIgnoreStdInclude</name>
<state>0</state>
</option>
<option>
<name>AUserIncludes</name>
<state></state>
</option>
<option>
<name>AExtraOptionsCheckV2</name>
<state>0</state>
</option>
<option>
<name>AExtraOptionsV2</name>
<state></state>
</option>
<option>
<name>AsmNoLiteralPool</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>OBJCOPY</name>
<archiveVersion>0</archiveVersion>
<data>
<version>1</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>OOCOutputFormat</name>
<version>3</version>
<state>0</state>
</option>
<option>
<name>OCOutputOverride</name>
<state>0</state>
</option>
<option>
<name>OOCOutputFile</name>
<state></state>
</option>
<option>
<name>OOCCommandLineProducer</name>
<state>1</state>
</option>
<option>
<name>OOCObjCopyEnable</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>CUSTOM</name>
<archiveVersion>3</archiveVersion>
<data>
<extensions></extensions>
<cmdline></cmdline>
<hasPrio>0</hasPrio>
</data>
</settings>
<settings>
<name>BICOMP</name>
<archiveVersion>0</archiveVersion>
<data />
</settings>
<settings>
<name>BUILDACTION</name>
<archiveVersion>1</archiveVersion>
<data>
<prebuild></prebuild>
<postbuild></postbuild>
</data>
</settings>
<settings>
<name>ILINK</name>
<archiveVersion>0</archiveVersion>
<data>
<version>20</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>IlinkLibIOConfig</name>
<state>1</state>
</option>
<option>
<name>XLinkMisraHandler</name>
<state>0</state>
</option>
<option>
<name>IlinkInputFileSlave</name>
<state>0</state>
</option>
<option>
<name>IlinkOutputFile</name>
<state>###Unitialized###</state>
</option>
<option>
<name>IlinkDebugInfoEnable</name>
<state>1</state>
</option>
<option>
<name>IlinkKeepSymbols</name>
<state></state>
</option>
<option>
<name>IlinkRawBinaryFile</name>
<state></state>
</option>
<option>
<name>IlinkRawBinarySymbol</name>
<state></state>
</option>
<option>
<name>IlinkRawBinarySegment</name>
<state></state>
</option>
<option>
<name>IlinkRawBinaryAlign</name>
<state></state>
</option>
<option>
<name>IlinkDefines</name>
<state></state>
</option>
<option>
<name>IlinkConfigDefines</name>
<state></state>
</option>
<option>
<name>IlinkMapFile</name>
<state>0</state>
</option>
<option>
<name>IlinkLogFile</name>
<state>0</state>
</option>
<option>
<name>IlinkLogInitialization</name>
<state>0</state>
</option>
<option>
<name>IlinkLogModule</name>
<state>0</state>
</option>
<option>
<name>IlinkLogSection</name>
<state>0</state>
</option>
<option>
<name>IlinkLogVeneer</name>
<state>0</state>
</option>
<option>
<name>IlinkIcfOverride</name>
<state>0</state>
</option>
<option>
<name>IlinkIcfFile</name>
<state>lnk0t.icf</state>
</option>
<option>
<name>IlinkIcfFileSlave</name>
<state></state>
</option>
<option>
<name>IlinkEnableRemarks</name>
<state>0</state>
</option>
<option>
<name>IlinkSuppressDiags</name>
<state></state>
</option>
<option>
<name>IlinkTreatAsRem</name>
<state></state>
</option>
<option>
<name>IlinkTreatAsWarn</name>
<state></state>
</option>
<option>
<name>IlinkTreatAsErr</name>
<state></state>
</option>
<option>
<name>IlinkWarningsAreErrors</name>
<state>0</state>
</option>
<option>
<name>IlinkUseExtraOptions</name>
<state>0</state>
</option>
<option>
<name>IlinkExtraOptions</name>
<state></state>
</option>
<option>
<name>IlinkLowLevelInterfaceSlave</name>
<state>1</state>
</option>
<option>
<name>IlinkAutoLibEnable</name>
<state>1</state>
</option>
<option>
<name>IlinkAdditionalLibs</name>
<state></state>
</option>
<option>
<name>IlinkOverrideProgramEntryLabel</name>
<state>0</state>
</option>
<option>
<name>IlinkProgramEntryLabelSelect</name>
<state>0</state>
</option>
<option>
<name>IlinkProgramEntryLabel</name>
<state></state>
</option>
<option>
<name>DoFill</name>
<state>0</state>
</option>
<option>
<name>FillerByte</name>
<state>0xFF</state>
</option>
<option>
<name>FillerStart</name>
<state>0x0</state>
</option>
<option>
<name>FillerEnd</name>
<state>0x0</state>
</option>
<option>
<name>CrcSize</name>
<version>0</version>
<state>1</state>
</option>
<option>
<name>CrcAlign</name>
<state>1</state>
</option>
<option>
<name>CrcPoly</name>
<state>0x11021</state>
</option>
<option>
<name>CrcCompl</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CrcBitOrder</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CrcInitialValue</name>
<state>0x0</state>
</option>
<option>
<name>DoCrc</name>
<state>0</state>
</option>
<option>
<name>IlinkBE8Slave</name>
<state>1</state>
</option>
<option>
<name>IlinkBufferedTerminalOutput</name>
<state>1</state>
</option>
<option>
<name>IlinkStdoutInterfaceSlave</name>
<state>1</state>
</option>
<option>
<name>CrcFullSize</name>
<state>0</state>
</option>
<option>
<name>IlinkIElfToolPostProcess</name>
<state>0</state>
</option>
<option>
<name>IlinkLogAutoLibSelect</name>
<state>0</state>
</option>
<option>
<name>IlinkLogRedirSymbols</name>
<state>0</state>
</option>
<option>
<name>IlinkLogUnusedFragments</name>
<state>0</state>
</option>
<option>
<name>IlinkCrcReverseByteOrder</name>
<state>0</state>
</option>
<option>
<name>IlinkCrcUseAsInput</name>
<state>1</state>
</option>
<option>
<name>IlinkOptInline</name>
<state>1</state>
</option>
<option>
<name>IlinkOptExceptionsAllow</name>
<state>1</state>
</option>
<option>
<name>IlinkOptExceptionsForce</name>
<state>0</state>
</option>
<option>
<name>IlinkCmsis</name>
<state>1</state>
</option>
<option>
<name>IlinkOptMergeDuplSections</name>
<state>0</state>
</option>
<option>
<name>IlinkOptUseVfe</name>
<state>1</state>
</option>
<option>
<name>IlinkOptForceVfe</name>
<state>0</state>
</option>
<option>
<name>IlinkStackAnalysisEnable</name>
<state>0</state>
</option>
<option>
<name>IlinkStackControlFile</name>
<state></state>
</option>
<option>
<name>IlinkStackCallGraphFile</name>
<state></state>
</option>
<option>
<name>CrcAlgorithm</name>
<version>1</version>
<state>1</state>
</option>
<option>
<name>CrcUnitSize</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>IlinkThreadsSlave</name>
<state>1</state>
</option>
<option>
<name>IlinkLogCallGraph</name>
<state>0</state>
</option>
<option>
<name>IlinkIcfFile_AltDefault</name>
<state></state>
</option>
<option>
<name>IlinkEncInput</name>
<state>0</state>
</option>
<option>
<name>IlinkEncOutput</name>
<state>0</state>
</option>
<option>
<name>IlinkEncOutputBom</name>
<state>1</state>
</option>
<option>
<name>IlinkHeapSelect</name>
<state>1</state>
</option>
<option>
<name>IlinkLocaleSelect</name>
<state>1</state>
</option>
</data>
</settings>
<settings>
<name>IARCHIVE</name>
<archiveVersion>0</archiveVersion>
<data>
<version>0</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>IarchiveInputs</name>
<state></state>
</option>
<option>
<name>IarchiveOverride</name>
<state>0</state>
</option>
<option>
<name>IarchiveOutput</name>
<state>###Unitialized###</state>
</option>
</data>
</settings>
<settings>
<name>BILINK</name>
<archiveVersion>0</archiveVersion>
<data />
</settings>
</configuration>
<group>
<name>Applications</name>
<file>
<name>$PROJ_DIR$\applications\main.c</name>
</file>
</group>
<group>
<name>cpu</name>
<file>
<name>$PROJ_DIR$\..\..\..\libcpu\arm\common\backtrace.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4\context_iar.S</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4\cpuport.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\libcpu\arm\common\div0.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\libcpu\arm\common\showmem.c</name>
</file>
</group>
<group>
<name>DeviceDrivers</name>
<file>
<name>$PROJ_DIR$\..\..\..\components\drivers\src\completion.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\drivers\src\dataqueue.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\drivers\misc\pin.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\drivers\src\pipe.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\drivers\src\ringblk_buf.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\drivers\src\ringbuffer.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\drivers\serial\serial.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\drivers\src\waitqueue.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\drivers\src\workqueue.c</name>
</file>
</group>
<group>
<name>Drivers</name>
<file>
<name>$PROJ_DIR$\board\board.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\HAL_Drivers\drv_common.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\HAL_Drivers\drv_gpio.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\HAL_Drivers\drv_usart.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Source\Templates\iar\startup_stm32l476xx.s</name>
</file>
<file>
<name>$PROJ_DIR$\board\CubeMX_Config\Src\stm32l4xx_hal_msp.c</name>
</file>
</group>
<group>
<name>finsh</name>
<file>
<name>$PROJ_DIR$\..\..\..\components\finsh\cmd.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\finsh\msh.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\finsh\msh_cmd.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\finsh\msh_file.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\finsh\shell.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\finsh\symbol.c</name>
</file>
</group>
<group>
<name>Kernel</name>
<file>
<name>$PROJ_DIR$\..\..\..\src\clock.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\components.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\cpu.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\device.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\idle.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\ipc.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\irq.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\kservice.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\mem.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\mempool.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\object.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\scheduler.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\signal.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\thread.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\timer.c</name>
</file>
</group>
<group>
<name>STM32_HAL</name>
<file>
<name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_comp.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_crc.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_crc_ex.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cryp.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cryp_ex.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rng.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_sram.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart_ex.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Source\Templates\system_stm32l4xx.c</name>
</file>
</group>
</project> </project>
bsp/stm32/stm32l476-st-nucleo/project.uvoptx
浏览文件 @ eddf2386
...@@ -182,827 +182,11 @@ ...@@ -182,827 +182,11 @@
</Target> </Target>
<Group> <Group>
<GroupName>Kernel</GroupName> <GroupName>Source Group 1</GroupName>
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel> <cbSel>0</cbSel>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>1</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\clock.c</PathWithFileName>
<FilenameWithoutPath>clock.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>2</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\components.c</PathWithFileName>
<FilenameWithoutPath>components.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>3</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\cpu.c</PathWithFileName>
<FilenameWithoutPath>cpu.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>4</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\device.c</PathWithFileName>
<FilenameWithoutPath>device.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>5</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\idle.c</PathWithFileName>
<FilenameWithoutPath>idle.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>6</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\ipc.c</PathWithFileName>
<FilenameWithoutPath>ipc.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>7</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\irq.c</PathWithFileName>
<FilenameWithoutPath>irq.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>8</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\kservice.c</PathWithFileName>
<FilenameWithoutPath>kservice.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>9</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\mem.c</PathWithFileName>
<FilenameWithoutPath>mem.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>10</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\mempool.c</PathWithFileName>
<FilenameWithoutPath>mempool.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>11</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\object.c</PathWithFileName>
<FilenameWithoutPath>object.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>12</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\scheduler.c</PathWithFileName>
<FilenameWithoutPath>scheduler.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>13</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\signal.c</PathWithFileName>
<FilenameWithoutPath>signal.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>14</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\thread.c</PathWithFileName>
<FilenameWithoutPath>thread.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>15</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\timer.c</PathWithFileName>
<FilenameWithoutPath>timer.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
</Group>
<Group>
<GroupName>Applications</GroupName>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>0</RteFlg>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>16</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>applications\main.c</PathWithFileName>
<FilenameWithoutPath>main.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
</Group>
<Group>
<GroupName>Drivers</GroupName>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>0</RteFlg>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>17</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>board\board.c</PathWithFileName>
<FilenameWithoutPath>board.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>18</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>board\CubeMX_Config\Src\stm32l4xx_hal_msp.c</PathWithFileName>
<FilenameWithoutPath>stm32l4xx_hal_msp.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>19</FileNumber>
<FileType>2</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Source\Templates\arm\startup_stm32l476xx.s</PathWithFileName>
<FilenameWithoutPath>startup_stm32l476xx.s</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>20</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\libraries\HAL_Drivers\drv_gpio.c</PathWithFileName>
<FilenameWithoutPath>drv_gpio.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>21</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\libraries\HAL_Drivers\drv_usart.c</PathWithFileName>
<FilenameWithoutPath>drv_usart.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>22</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\libraries\HAL_Drivers\drv_common.c</PathWithFileName>
<FilenameWithoutPath>drv_common.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
</Group>
<Group>
<GroupName>cpu</GroupName>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>0</RteFlg>
<File>
<GroupNumber>4</GroupNumber>
<FileNumber>23</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\libcpu\arm\common\backtrace.c</PathWithFileName>
<FilenameWithoutPath>backtrace.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>4</GroupNumber>
<FileNumber>24</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\libcpu\arm\common\div0.c</PathWithFileName>
<FilenameWithoutPath>div0.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>4</GroupNumber>
<FileNumber>25</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\libcpu\arm\common\showmem.c</PathWithFileName>
<FilenameWithoutPath>showmem.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>4</GroupNumber>
<FileNumber>26</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\libcpu\arm\cortex-m4\cpuport.c</PathWithFileName>
<FilenameWithoutPath>cpuport.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>4</GroupNumber>
<FileNumber>27</FileNumber>
<FileType>2</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\libcpu\arm\cortex-m4\context_rvds.S</PathWithFileName>
<FilenameWithoutPath>context_rvds.S</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
</Group>
<Group>
<GroupName>DeviceDrivers</GroupName>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>0</RteFlg>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>28</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\components\drivers\misc\pin.c</PathWithFileName>
<FilenameWithoutPath>pin.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>29</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\components\drivers\serial\serial.c</PathWithFileName>
<FilenameWithoutPath>serial.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>30</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\components\drivers\src\completion.c</PathWithFileName>
<FilenameWithoutPath>completion.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>31</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\components\drivers\src\dataqueue.c</PathWithFileName>
<FilenameWithoutPath>dataqueue.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>32</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\components\drivers\src\pipe.c</PathWithFileName>
<FilenameWithoutPath>pipe.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>33</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\components\drivers\src\ringblk_buf.c</PathWithFileName>
<FilenameWithoutPath>ringblk_buf.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>34</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\components\drivers\src\ringbuffer.c</PathWithFileName>
<FilenameWithoutPath>ringbuffer.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>35</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\components\drivers\src\waitqueue.c</PathWithFileName>
<FilenameWithoutPath>waitqueue.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>36</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\components\drivers\src\workqueue.c</PathWithFileName>
<FilenameWithoutPath>workqueue.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
</Group>
<Group>
<GroupName>finsh</GroupName>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>0</RteFlg>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>37</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\components\finsh\shell.c</PathWithFileName>
<FilenameWithoutPath>shell.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>38</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\components\finsh\symbol.c</PathWithFileName>
<FilenameWithoutPath>symbol.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>39</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\components\finsh\cmd.c</PathWithFileName>
<FilenameWithoutPath>cmd.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>40</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\components\finsh\msh.c</PathWithFileName>
<FilenameWithoutPath>msh.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>41</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\components\finsh\msh_cmd.c</PathWithFileName>
<FilenameWithoutPath>msh_cmd.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>42</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\components\finsh\msh_file.c</PathWithFileName>
<FilenameWithoutPath>msh_file.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
</Group>
<Group>
<GroupName>STM32_HAL</GroupName>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>0</RteFlg>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>43</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Source\Templates\system_stm32l4xx.c</PathWithFileName>
<FilenameWithoutPath>system_stm32l4xx.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>44</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c</PathWithFileName>
<FilenameWithoutPath>stm32l4xx_hal.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>45</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_comp.c</PathWithFileName>
<FilenameWithoutPath>stm32l4xx_hal_comp.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>46</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c</PathWithFileName>
<FilenameWithoutPath>stm32l4xx_hal_cortex.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>47</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_crc.c</PathWithFileName>
<FilenameWithoutPath>stm32l4xx_hal_crc.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>48</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_crc_ex.c</PathWithFileName>
<FilenameWithoutPath>stm32l4xx_hal_crc_ex.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>49</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cryp.c</PathWithFileName>
<FilenameWithoutPath>stm32l4xx_hal_cryp.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>50</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cryp_ex.c</PathWithFileName>
<FilenameWithoutPath>stm32l4xx_hal_cryp_ex.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>51</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c</PathWithFileName>
<FilenameWithoutPath>stm32l4xx_hal_dma.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>52</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c</PathWithFileName>
<FilenameWithoutPath>stm32l4xx_hal_dma_ex.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>53</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c</PathWithFileName>
<FilenameWithoutPath>stm32l4xx_hal_exti.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>54</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c</PathWithFileName>
<FilenameWithoutPath>stm32l4xx_hal_pwr.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>55</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c</PathWithFileName>
<FilenameWithoutPath>stm32l4xx_hal_pwr_ex.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>56</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c</PathWithFileName>
<FilenameWithoutPath>stm32l4xx_hal_rcc.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>57</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c</PathWithFileName>
<FilenameWithoutPath>stm32l4xx_hal_rcc_ex.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>58</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rng.c</PathWithFileName>
<FilenameWithoutPath>stm32l4xx_hal_rng.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>59</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_sram.c</PathWithFileName>
<FilenameWithoutPath>stm32l4xx_hal_sram.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>60</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c</PathWithFileName>
<FilenameWithoutPath>stm32l4xx_hal_gpio.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>61</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c</PathWithFileName>
<FilenameWithoutPath>stm32l4xx_hal_uart.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>62</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c</PathWithFileName>
<FilenameWithoutPath>stm32l4xx_hal_uart_ex.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>63</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart.c</PathWithFileName>
<FilenameWithoutPath>stm32l4xx_hal_usart.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>64</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart_ex.c</PathWithFileName>
<FilenameWithoutPath>stm32l4xx_hal_usart_ex.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
</Group> </Group>
</ProjectOpt> </ProjectOpt>
bsp/stm32/stm32l476-st-nucleo/project.uvprojx
浏览文件 @ eddf2386
<?xml version="1.0" encoding="UTF-8" standalone="no" ?> <?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd"> <Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
<SchemaVersion>2.1</SchemaVersion> <SchemaVersion>2.1</SchemaVersion>
<Header>### uVision Project, (C) Keil Software</Header> <Header>### uVision Project, (C) Keil Software</Header>
<Targets> <Targets>
<Target> <Target>
<TargetName>rt-thread</TargetName> <TargetName>rt-thread</TargetName>
...@@ -19,28 +16,28 @@ ...@@ -19,28 +16,28 @@
<PackID>Keil.STM32L4xx_DFP.2.0.0</PackID> <PackID>Keil.STM32L4xx_DFP.2.0.0</PackID>
<PackURL>http://www.keil.com/pack</PackURL> <PackURL>http://www.keil.com/pack</PackURL>
<Cpu>IRAM(0x20000000,0x00018000) IRAM2(0x10000000,0x00008000) IROM(0x08000000,0x00100000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu> <Cpu>IRAM(0x20000000,0x00018000) IRAM2(0x10000000,0x00008000) IROM(0x08000000,0x00100000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec> <FlashUtilSpec />
<StartupFile></StartupFile> <StartupFile />
<FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32L4xx_1024 -FS08000000 -FL0100000 -FP0($$Device:STM32L476RGTx$CMSIS\Flash\STM32L4xx_1024.FLM))</FlashDriverDll> <FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32L4xx_1024 -FS08000000 -FL0100000 -FP0($$Device:STM32L476RGTx$CMSIS\Flash\STM32L4xx_1024.FLM))</FlashDriverDll>
<DeviceId>0</DeviceId> <DeviceId>0</DeviceId>
<RegisterFile>$$Device:STM32L476RGTx$Drivers\CMSIS\Device\ST\STM32L4xx\Include\stm32l4xx.h</RegisterFile> <RegisterFile>$$Device:STM32L476RGTx$Drivers\CMSIS\Device\ST\STM32L4xx\Include\stm32l4xx.h</RegisterFile>
<MemoryEnv></MemoryEnv> <MemoryEnv />
<Cmp></Cmp> <Cmp />
<Asm></Asm> <Asm />
<Linker></Linker> <Linker />
<OHString></OHString> <OHString />
<InfinionOptionDll></InfinionOptionDll> <InfinionOptionDll />
<SLE66CMisc></SLE66CMisc> <SLE66CMisc />
<SLE66AMisc></SLE66AMisc> <SLE66AMisc />
<SLE66LinkerMisc></SLE66LinkerMisc> <SLE66LinkerMisc />
<SFDFile>$$Device:STM32L476RGTx$CMSIS\SVD\STM32L4x6.svd</SFDFile> <SFDFile>$$Device:STM32L476RGTx$CMSIS\SVD\STM32L4x6.svd</SFDFile>
<bCustSvd>0</bCustSvd> <bCustSvd>0</bCustSvd>
<UseEnv>0</UseEnv> <UseEnv>0</UseEnv>
<BinPath></BinPath> <BinPath />
<IncludePath></IncludePath> <IncludePath />
<LibPath></LibPath> <LibPath />
<RegisterFilePath></RegisterFilePath> <RegisterFilePath />
<DBRegisterFilePath></DBRegisterFilePath> <DBRegisterFilePath />
<TargetStatus> <TargetStatus>
<Error>0</Error> <Error>0</Error>
<ExitCodeStop>0</ExitCodeStop> <ExitCodeStop>0</ExitCodeStop>
...@@ -62,8 +59,8 @@ ...@@ -62,8 +59,8 @@
<BeforeCompile> <BeforeCompile>
<RunUserProg1>0</RunUserProg1> <RunUserProg1>0</RunUserProg1>
<RunUserProg2>0</RunUserProg2> <RunUserProg2>0</RunUserProg2>
<UserProg1Name></UserProg1Name> <UserProg1Name />
<UserProg2Name></UserProg2Name> <UserProg2Name />
<UserProg1Dos16Mode>0</UserProg1Dos16Mode> <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode> <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
<nStopU1X>0</nStopU1X> <nStopU1X>0</nStopU1X>
...@@ -72,8 +69,8 @@ ...@@ -72,8 +69,8 @@
<BeforeMake> <BeforeMake>
<RunUserProg1>0</RunUserProg1> <RunUserProg1>0</RunUserProg1>
<RunUserProg2>0</RunUserProg2> <RunUserProg2>0</RunUserProg2>
<UserProg1Name></UserProg1Name> <UserProg1Name />
<UserProg2Name></UserProg2Name> <UserProg2Name />
<UserProg1Dos16Mode>0</UserProg1Dos16Mode> <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode> <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
<nStopB1X>0</nStopB1X> <nStopB1X>0</nStopB1X>
...@@ -83,14 +80,14 @@ ...@@ -83,14 +80,14 @@
<RunUserProg1>1</RunUserProg1> <RunUserProg1>1</RunUserProg1>
<RunUserProg2>0</RunUserProg2> <RunUserProg2>0</RunUserProg2>
<UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name> <UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
<UserProg2Name></UserProg2Name> <UserProg2Name />
<UserProg1Dos16Mode>0</UserProg1Dos16Mode> <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode> <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
<nStopA1X>0</nStopA1X> <nStopA1X>0</nStopA1X>
<nStopA2X>0</nStopA2X> <nStopA2X>0</nStopA2X>
</AfterMake> </AfterMake>
<SelectedForBatchBuild>0</SelectedForBatchBuild> <SelectedForBatchBuild>0</SelectedForBatchBuild>
<SVCSIdString></SVCSIdString> <SVCSIdString />
</TargetCommonOption> </TargetCommonOption>
<CommonProperty> <CommonProperty>
<UseCPPCompiler>0</UseCPPCompiler> <UseCPPCompiler>0</UseCPPCompiler>
...@@ -104,8 +101,8 @@ ...@@ -104,8 +101,8 @@
<AssembleAssemblyFile>0</AssembleAssemblyFile> <AssembleAssemblyFile>0</AssembleAssemblyFile>
<PublicsOnly>0</PublicsOnly> <PublicsOnly>0</PublicsOnly>
<StopOnExitCode>3</StopOnExitCode> <StopOnExitCode>3</StopOnExitCode>
<CustomArgument></CustomArgument> <CustomArgument />
<IncludeLibraryModules></IncludeLibraryModules> <IncludeLibraryModules />
<ComprImg>1</ComprImg> <ComprImg>1</ComprImg>
</CommonProperty> </CommonProperty>
<DllOption> <DllOption>
...@@ -138,11 +135,11 @@ ...@@ -138,11 +135,11 @@
</Flash1> </Flash1>
<bUseTDR>1</bUseTDR> <bUseTDR>1</bUseTDR>
<Flash2>BIN\UL2CM3.DLL</Flash2> <Flash2>BIN\UL2CM3.DLL</Flash2>
<Flash3></Flash3> <Flash3 />
<Flash4></Flash4> <Flash4 />
<pFcarmOut></pFcarmOut> <pFcarmOut />
<pFcarmGrp></pFcarmGrp> <pFcarmGrp />
<pFcArmRoot></pFcArmRoot> <pFcArmRoot />
<FcArmLst>0</FcArmLst> <FcArmLst>0</FcArmLst>
</Utilities> </Utilities>
<TargetArmAds> <TargetArmAds>
...@@ -175,7 +172,7 @@ ...@@ -175,7 +172,7 @@
<RvctClst>0</RvctClst> <RvctClst>0</RvctClst>
<GenPPlst>0</GenPPlst> <GenPPlst>0</GenPPlst>
<AdsCpuType>"Cortex-M4"</AdsCpuType> <AdsCpuType>"Cortex-M4"</AdsCpuType>
<RvctDeviceName></RvctDeviceName> <RvctDeviceName />
<mOS>0</mOS> <mOS>0</mOS>
<uocRom>0</uocRom> <uocRom>0</uocRom>
<uocRam>0</uocRam> <uocRam>0</uocRam>
...@@ -308,7 +305,7 @@ ...@@ -308,7 +305,7 @@
<Size>0x8000</Size> <Size>0x8000</Size>
</OCR_RVCT10> </OCR_RVCT10>
</OnChipMemories> </OnChipMemories>
<RvctStartVector></RvctStartVector> <RvctStartVector />
</ArmAdsMisc> </ArmAdsMisc>
<Cads> <Cads>
<interw>1</interw> <interw>1</interw>
...@@ -335,10 +332,10 @@ ...@@ -335,10 +332,10 @@
<v6WtE>0</v6WtE> <v6WtE>0</v6WtE>
<v6Rtti>0</v6Rtti> <v6Rtti>0</v6Rtti>
<VariousControls> <VariousControls>
<MiscControls></MiscControls> <MiscControls />
<Define>USE_HAL_DRIVER, STM32L476xx</Define> <Define>USE_HAL_DRIVER, STM32L476xx, RT_USING_ARM_LIBC</Define>
<Undefine></Undefine> <Undefine />
<IncludePath>.;..\..\..\include;.;applications;board;board\CubeMX_Config\Inc;board\ports;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m4;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\finsh;..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Inc;..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Include;..\libraries\STM32L4xx_HAL\CMSIS\Include</IncludePath> <IncludePath>.;..\..\..\include;applications;board;board\CubeMX_Config\Inc;board\ports;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m4;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\finsh;..\..\..\components\libc\compilers\armlibc;..\..\..\components\libc\compilers\common;..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Inc;..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Include;..\libraries\STM32L4xx_HAL\CMSIS\Include</IncludePath>
</VariousControls> </VariousControls>
</Cads> </Cads>
<Aads> <Aads>
...@@ -353,10 +350,10 @@ ...@@ -353,10 +350,10 @@
<useXO>0</useXO> <useXO>0</useXO>
<uClangAs>0</uClangAs> <uClangAs>0</uClangAs>
<VariousControls> <VariousControls>
<MiscControls></MiscControls> <MiscControls />
<Define></Define> <Define />
<Undefine></Undefine> <Undefine />
<IncludePath></IncludePath> <IncludePath />
</VariousControls> </VariousControls>
</Aads> </Aads>
<LDads> <LDads>
...@@ -368,13 +365,13 @@ ...@@ -368,13 +365,13 @@
<useFile>0</useFile> <useFile>0</useFile>
<TextAddressRange>0x08000000</TextAddressRange> <TextAddressRange>0x08000000</TextAddressRange>
<DataAddressRange>0x20000000</DataAddressRange> <DataAddressRange>0x20000000</DataAddressRange>
<pXoBase></pXoBase> <pXoBase />
<ScatterFile>.\board\linker_scripts\link.sct</ScatterFile> <ScatterFile>.\board\linker_scripts\link.sct</ScatterFile>
<IncludeLibs></IncludeLibs> <IncludeLibs />
<IncludeLibsPath></IncludeLibsPath> <IncludeLibsPath />
<Misc> --keep *.o(.rti_fn.*) --keep *.o(FSymTab)</Misc> <Misc> --keep *.o(.rti_fn.*) --keep *.o(FSymTab)</Misc>
<LinkerInputFile></LinkerInputFile> <LinkerInputFile />
<DisabledWarnings></DisabledWarnings> <DisabledWarnings />
</LDads> </LDads>
</TargetArmAds> </TargetArmAds>
</TargetOption> </TargetOption>
...@@ -387,71 +384,99 @@ ...@@ -387,71 +384,99 @@
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\src\clock.c</FilePath> <FilePath>..\..\..\src\clock.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>components.c</FileName> <FileName>components.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\src\components.c</FilePath> <FilePath>..\..\..\src\components.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>cpu.c</FileName> <FileName>cpu.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\src\cpu.c</FilePath> <FilePath>..\..\..\src\cpu.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>device.c</FileName> <FileName>device.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\src\device.c</FilePath> <FilePath>..\..\..\src\device.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>idle.c</FileName> <FileName>idle.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\src\idle.c</FilePath> <FilePath>..\..\..\src\idle.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>ipc.c</FileName> <FileName>ipc.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\src\ipc.c</FilePath> <FilePath>..\..\..\src\ipc.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>irq.c</FileName> <FileName>irq.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\src\irq.c</FilePath> <FilePath>..\..\..\src\irq.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>kservice.c</FileName> <FileName>kservice.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\src\kservice.c</FilePath> <FilePath>..\..\..\src\kservice.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>mem.c</FileName> <FileName>mem.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\src\mem.c</FilePath> <FilePath>..\..\..\src\mem.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>mempool.c</FileName> <FileName>mempool.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\src\mempool.c</FilePath> <FilePath>..\..\..\src\mempool.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>object.c</FileName> <FileName>object.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\src\object.c</FilePath> <FilePath>..\..\..\src\object.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>scheduler.c</FileName> <FileName>scheduler.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\src\scheduler.c</FilePath> <FilePath>..\..\..\src\scheduler.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>signal.c</FileName> <FileName>signal.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\src\signal.c</FilePath> <FilePath>..\..\..\src\signal.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>thread.c</FileName> <FileName>thread.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\src\thread.c</FilePath> <FilePath>..\..\..\src\thread.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>timer.c</FileName> <FileName>timer.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
...@@ -477,26 +502,43 @@ ...@@ -477,26 +502,43 @@
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>board\board.c</FilePath> <FilePath>board\board.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>stm32l4xx_hal_msp.c</FileName> <FileName>stm32l4xx_hal_msp.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>board\CubeMX_Config\Src\stm32l4xx_hal_msp.c</FilePath> <FilePath>board\CubeMX_Config\Src\stm32l4xx_hal_msp.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>startup_stm32l476xx.s</FileName> <FileName>startup_stm32l476xx.s</FileName>
<FileType>2</FileType> <FileType>2</FileType>
<FilePath>..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Source\Templates\arm\startup_stm32l476xx.s</FilePath> <FilePath>..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Source\Templates\arm\startup_stm32l476xx.s</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>drv_gpio.c</FileName> <FileName>drv_gpio.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\HAL_Drivers\drv_gpio.c</FilePath> <FilePath>..\libraries\HAL_Drivers\drv_gpio.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>drv_usart.c</FileName> <FileName>drv_usart.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\HAL_Drivers\drv_usart.c</FilePath> <FilePath>..\libraries\HAL_Drivers\drv_usart.c</FilePath>
</File> </File>
</Files>
<Files>
<File>
<FileName>drv_soft_i2c.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\HAL_Drivers\drv_soft_i2c.c</FilePath>
</File>
</Files>
<Files>
<File> <File>
<FileName>drv_common.c</FileName> <FileName>drv_common.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
...@@ -512,21 +554,29 @@ ...@@ -512,21 +554,29 @@
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\libcpu\arm\common\backtrace.c</FilePath> <FilePath>..\..\..\libcpu\arm\common\backtrace.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>div0.c</FileName> <FileName>div0.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\libcpu\arm\common\div0.c</FilePath> <FilePath>..\..\..\libcpu\arm\common\div0.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>showmem.c</FileName> <FileName>showmem.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\libcpu\arm\common\showmem.c</FilePath> <FilePath>..\..\..\libcpu\arm\common\showmem.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>cpuport.c</FileName> <FileName>cpuport.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\libcpu\arm\cortex-m4\cpuport.c</FilePath> <FilePath>..\..\..\libcpu\arm\cortex-m4\cpuport.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>context_rvds.S</FileName> <FileName>context_rvds.S</FileName>
<FileType>2</FileType> <FileType>2</FileType>
...@@ -536,47 +586,91 @@ ...@@ -536,47 +586,91 @@
</Group> </Group>
<Group> <Group>
<GroupName>DeviceDrivers</GroupName> <GroupName>DeviceDrivers</GroupName>
<Files>
<File>
<FileName>i2c_core.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\drivers\i2c\i2c_core.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>i2c_dev.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\drivers\i2c\i2c_dev.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>i2c-bit-ops.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\drivers\i2c\i2c-bit-ops.c</FilePath>
</File>
</Files>
<Files> <Files>
<File> <File>
<FileName>pin.c</FileName> <FileName>pin.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\components\drivers\misc\pin.c</FilePath> <FilePath>..\..\..\components\drivers\misc\pin.c</FilePath>
</File> </File>
</Files>
<Files>
<File>
<FileName>rtc.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\drivers\rtc\rtc.c</FilePath>
</File>
</Files>
<Files>
<File> <File>
<FileName>serial.c</FileName> <FileName>serial.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\components\drivers\serial\serial.c</FilePath> <FilePath>..\..\..\components\drivers\serial\serial.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>completion.c</FileName> <FileName>completion.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\components\drivers\src\completion.c</FilePath> <FilePath>..\..\..\components\drivers\src\completion.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>dataqueue.c</FileName> <FileName>dataqueue.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\components\drivers\src\dataqueue.c</FilePath> <FilePath>..\..\..\components\drivers\src\dataqueue.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>pipe.c</FileName> <FileName>pipe.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\components\drivers\src\pipe.c</FilePath> <FilePath>..\..\..\components\drivers\src\pipe.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>ringblk_buf.c</FileName> <FileName>ringblk_buf.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\components\drivers\src\ringblk_buf.c</FilePath> <FilePath>..\..\..\components\drivers\src\ringblk_buf.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>ringbuffer.c</FileName> <FileName>ringbuffer.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\components\drivers\src\ringbuffer.c</FilePath> <FilePath>..\..\..\components\drivers\src\ringbuffer.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>waitqueue.c</FileName> <FileName>waitqueue.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\components\drivers\src\waitqueue.c</FilePath> <FilePath>..\..\..\components\drivers\src\waitqueue.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>workqueue.c</FileName> <FileName>workqueue.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
...@@ -592,26 +686,36 @@ ...@@ -592,26 +686,36 @@
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\components\finsh\shell.c</FilePath> <FilePath>..\..\..\components\finsh\shell.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>symbol.c</FileName> <FileName>symbol.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\components\finsh\symbol.c</FilePath> <FilePath>..\..\..\components\finsh\symbol.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>cmd.c</FileName> <FileName>cmd.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\components\finsh\cmd.c</FilePath> <FilePath>..\..\..\components\finsh\cmd.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>msh.c</FileName> <FileName>msh.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\components\finsh\msh.c</FilePath> <FilePath>..\..\..\components\finsh\msh.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>msh_cmd.c</FileName> <FileName>msh_cmd.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\..\..\components\finsh\msh_cmd.c</FilePath> <FilePath>..\..\..\components\finsh\msh_cmd.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>msh_file.c</FileName> <FileName>msh_file.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
...@@ -619,6 +723,44 @@ ...@@ -619,6 +723,44 @@
</File> </File>
</Files> </Files>
</Group> </Group>
<Group>
<GroupName>libc</GroupName>
<Files>
<File>
<FileName>libc.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\libc\compilers\armlibc\libc.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>mem_std.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\libc\compilers\armlibc\mem_std.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>stubs.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\libc\compilers\armlibc\stubs.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>time.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\libc\compilers\armlibc\time.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>gmtime_r.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\libc\compilers\common\gmtime_r.c</FilePath>
</File>
</Files>
</Group>
<Group> <Group>
<GroupName>STM32_HAL</GroupName> <GroupName>STM32_HAL</GroupName>
<Files> <Files>
...@@ -627,121 +769,189 @@ ...@@ -627,121 +769,189 @@
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Source\Templates\system_stm32l4xx.c</FilePath> <FilePath>..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Source\Templates\system_stm32l4xx.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>stm32l4xx_hal.c</FileName> <FileName>stm32l4xx_hal.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c</FilePath> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>stm32l4xx_hal_comp.c</FileName> <FileName>stm32l4xx_hal_comp.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_comp.c</FilePath> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_comp.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>stm32l4xx_hal_cortex.c</FileName> <FileName>stm32l4xx_hal_cortex.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c</FilePath> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>stm32l4xx_hal_crc.c</FileName> <FileName>stm32l4xx_hal_crc.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_crc.c</FilePath> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_crc.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>stm32l4xx_hal_crc_ex.c</FileName> <FileName>stm32l4xx_hal_crc_ex.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_crc_ex.c</FilePath> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_crc_ex.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>stm32l4xx_hal_cryp.c</FileName> <FileName>stm32l4xx_hal_cryp.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cryp.c</FilePath> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cryp.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>stm32l4xx_hal_cryp_ex.c</FileName> <FileName>stm32l4xx_hal_cryp_ex.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cryp_ex.c</FilePath> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cryp_ex.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>stm32l4xx_hal_dma.c</FileName> <FileName>stm32l4xx_hal_dma.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c</FilePath> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>stm32l4xx_hal_dma_ex.c</FileName> <FileName>stm32l4xx_hal_dma_ex.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c</FilePath> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>stm32l4xx_hal_exti.c</FileName> <FileName>stm32l4xx_hal_exti.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c</FilePath> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>stm32l4xx_hal_pwr.c</FileName> <FileName>stm32l4xx_hal_pwr.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c</FilePath> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>stm32l4xx_hal_pwr_ex.c</FileName> <FileName>stm32l4xx_hal_pwr_ex.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c</FilePath> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>stm32l4xx_hal_rcc.c</FileName> <FileName>stm32l4xx_hal_rcc.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c</FilePath> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>stm32l4xx_hal_rcc_ex.c</FileName> <FileName>stm32l4xx_hal_rcc_ex.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c</FilePath> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>stm32l4xx_hal_rng.c</FileName> <FileName>stm32l4xx_hal_rng.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rng.c</FilePath> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rng.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>stm32l4xx_hal_sram.c</FileName> <FileName>stm32l4xx_hal_sram.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_sram.c</FilePath> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_sram.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>stm32l4xx_hal_gpio.c</FileName> <FileName>stm32l4xx_hal_gpio.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c</FilePath> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>stm32l4xx_hal_uart.c</FileName> <FileName>stm32l4xx_hal_uart.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c</FilePath> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>stm32l4xx_hal_uart_ex.c</FileName> <FileName>stm32l4xx_hal_uart_ex.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c</FilePath> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>stm32l4xx_hal_usart.c</FileName> <FileName>stm32l4xx_hal_usart.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart.c</FilePath> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart.c</FilePath>
</File> </File>
</Files>
<Files>
<File> <File>
<FileName>stm32l4xx_hal_usart_ex.c</FileName> <FileName>stm32l4xx_hal_usart_ex.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart_ex.c</FilePath> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart_ex.c</FilePath>
</File> </File>
</Files> </Files>
<Files>
<File>
<FileName>stm32l4xx_hal_i2c.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>stm32l4xx_hal_i2c_ex.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c_ex.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>stm32l4xx_hal_rtc.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rtc.c</FilePath>
</File>
</Files>
<Files>
<File>
<FileName>stm32l4xx_hal_rtc_ex.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rtc_ex.c</FilePath>
</File>
</Files>
</Group> </Group>
</Groups> </Groups>
</Target> </Target>
</Targets> </Targets>
<RTE> <RTE>
<apis/> <apis />
<components/> <components />
<files/> <files />
</RTE> </RTE>
</Project> </Project>
bsp/stm32/stm32l476-st-nucleo/rtconfig.h
浏览文件 @ eddf2386
...@@ -78,9 +78,7 @@ ...@@ -78,9 +78,7 @@
#define RT_PIPE_BUFSZ 512 #define RT_PIPE_BUFSZ 512
#define RT_USING_SERIAL #define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA #define RT_SERIAL_USING_DMA
#define RT_SERIAL_RB_BUFSZ 64
#define RT_USING_PIN #define RT_USING_PIN
#define RT_USING_RTC
/* Using WiFi */ /* Using WiFi */
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或