diff --git a/bsp/renesas/ra4m2-eco/board/Kconfig b/bsp/renesas/ra4m2-eco/board/Kconfig
index ea84a100e2681f46b8eb057d8033143224ca940f..767fa624e7bb9776a7a121f73bf514c2dd3431c2 100644
--- a/bsp/renesas/ra4m2-eco/board/Kconfig
+++ b/bsp/renesas/ra4m2-eco/board/Kconfig
@@ -190,10 +190,6 @@ menu "Hardware Drivers Config"
             default n
             select RT_USING_SPI
             if BSP_USING_SPI
-                config BSP_SPI_USING_DTC_DMA
-                    bool "Enable SPI DTC transfers data without using the CPU."
-                    default n
-
                 config BSP_USING_SPI0
                     bool "Enable SPI0 BUS"
                     default n
@@ -201,27 +197,32 @@ menu "Hardware Drivers Config"
                 config BSP_USING_SPI1
                     bool "Enable SPI1 BUS"
                     default n
-
-                config BSP_USING_SCI_SPI0
-                    bool "Enable SCI SPI0 BUS"
-                    default n
-                config BSP_USING_SCI_SPI1
-                    bool "Enable SCI SPI1 BUS"
-                    default n
-                config BSP_USING_SCI_SPI2
-                    bool "Enable SCI SPI2 BUS"
-                    default n
-                config BSP_USING_SCI_SPI3
-                    bool "Enable SCI SPI3 BUS"
-                    default n
-                config BSP_USING_SCI_SPI4
-                    bool "Enable SCI SPI4 BUS"
-                    default n
-                config BSP_USING_SCI_SPI9
-                    bool "Enable SCI SPI9 BUS"
-                    default n
-
             endif
+
+    menuconfig BSP_USING_SCI_SPI
+        bool "Enable SCI SPI BUS"
+        default n
+        select RT_USING_SPI
+        if BSP_USING_SCI_SPI 
+            config BSP_USING_SCI_SPI0
+                bool "Enable SCI SPI0 BUS"
+                default n
+            config BSP_USING_SCI_SPI1
+                bool "Enable SCI SPI1 BUS"
+                default n
+            config BSP_USING_SCI_SPI2
+                bool "Enable SCI SPI2 BUS"
+                default n
+            config BSP_USING_SCI_SPI3
+                bool "Enable SCI SPI3 BUS"
+                default n
+            config BSP_USING_SCI_SPI4
+                bool "Enable SCI SPI4 BUS"
+                default n
+            config BSP_USING_SCI_SPI9
+                bool "Enable SCI SPI9 BUS"
+                default n
+        endif
     endmenu
     menu "Board extended module Drivers"
 
diff --git a/bsp/renesas/ra6m3-ek/board/Kconfig b/bsp/renesas/ra6m3-ek/board/Kconfig
index 0e9f77599a3a9c4dec7ebfe25efb2c48b83c1f9f..7eea2a104d9a526e1cb06bb8ab1f1de72de12f0f 100644
--- a/bsp/renesas/ra6m3-ek/board/Kconfig
+++ b/bsp/renesas/ra6m3-ek/board/Kconfig
@@ -50,20 +50,6 @@ menu "Hardware Drivers Config"
                     endif
             endif
 
-        menuconfig BSP_USING_SPI
-            bool "Enable SPI BUS"
-            default n
-            select RT_USING_SPI
-            if BSP_USING_SPI
-                config BSP_USING_SPI0
-                    bool "Enable SPI0 BUS"
-                    default n
-
-                config BSP_USING_SPI1
-                    bool "Enable SPI1 BUS"
-                    default n
-            endif
-
         menuconfig BSP_USING_FS
             bool "Enable File System"
             select RT_USING_DFS
@@ -79,80 +65,86 @@ menu "Hardware Drivers Config"
                     default n
             endif
 
-    menuconfig BSP_USING_PWM
-        bool "Enable PWM"
-        default n
-        select RT_USING_PWM
-        if BSP_USING_PWM
-            config BSP_USING_PWM12
-                bool "Enable GPT12 (16-Bits) output PWM"
-                default n
-        endif
+        menuconfig BSP_USING_PWM
+            bool "Enable PWM"
+            default n
+            select RT_USING_PWM
+            if BSP_USING_PWM
+                config BSP_USING_PWM12
+                    bool "Enable GPT12 (16-Bits) output PWM"
+                    default n
+            endif
 
-    config BSP_USING_LCD
-        bool "Enable LCD"
-        select BSP_USING_GPIO
-        default n
-
-    menuconfig BSP_USING_SCI_SPI
-        bool "Enable SCI SPI BUS"
-        default n
-        select RT_USING_SPI
-        if BSP_USING_SCI_SPI 
-            config BSP_USING_SCI_SPI0
-                bool "Enable SCI SPI0 BUS"
-                default n
-            config BSP_USING_SCI_SPI3
-                bool "Enable SCI SPI3 BUS"
-                default n
-            config BSP_USING_SCI_SPI6
-                bool "Enable SCI SPI6 BUS"
-                default n
-        endif
+        config BSP_USING_LCD
+            bool "Enable LCD"
+            select BSP_USING_GPIO
+            default n
 
-    menuconfig BSP_USING_SPI
-        bool "Enable SPI BUS"
-        default n
-        select RT_USING_SPI
-        if BSP_USING_SPI 
-            config BSP_USING_SPI0
-                bool "Enable SPI0 BUS"
-                default n
-            config BSP_USING_SPI1
-                bool "Enable SPI1 BUS"
-                default n
-        endif
+        menuconfig BSP_USING_SCI_SPI
+            bool "Enable SCI SPI BUS"
+            default n
+            select RT_USING_SPI
+            if BSP_USING_SCI_SPI 
+                config BSP_USING_SCI_SPI0
+                    bool "Enable SCI SPI0 BUS"
+                    default n
+                config BSP_USING_SCI_SPI1
+                    bool "Enable SCI SPI1 BUS"
+                    default n
+                config BSP_USING_SCI_SPI2
+                    bool "Enable SCI SPI2 BUS"
+                    default n
+                config BSP_USING_SCI_SPI3
+                    bool "Enable SCI SPI3 BUS"
+                    default n
+                config BSP_USING_SCI_SPI6
+                    bool "Enable SCI SPI6 BUS"
+                    default n
+            endif
+
+        menuconfig BSP_USING_SPI
+            bool "Enable SPI BUS"
+            default n
+            select RT_USING_SPI
+            if BSP_USING_SPI 
+                config BSP_USING_SPI0
+                    bool "Enable SPI0 BUS"
+                    default n
+                config BSP_USING_SPI1
+                    bool "Enable SPI1 BUS"
+                    default n
+            endif
+
+        config BSP_USING_SPI_LCD
+            bool "Enable SPI LCD"
+            select BSP_USING_GPIO
+            select BSP_USING_SPI
+            select BSP_USING_SPI0
+            default n
+
+        menuconfig BSP_USING_LVGL
+            bool "Enable LVGL for LCD"
+            select PKG_USING_LVGL
+            default n
+            if BSP_USING_LVGL
+                config BSP_USING_LCD_ILI9431
+                    bool "Enable LVGL for LCD_ILI9431"
+                    select PKG_USING_ILI9341
+                    select BSP_USING_SPI_LCD
+                    default n
+                config BSP_USING_LCD_RGB
+                    bool "Enable LVGL for LCD_RGB565"
+                    select BSP_USING_LCD
+                    default n
+            endif
 
-    config BSP_USING_SPI_LCD
-        bool "Enable SPI LCD"
-        select BSP_USING_GPIO
-        select BSP_USING_SPI
-        select BSP_USING_SPI0
-        default n
-
-    menuconfig BSP_USING_LVGL
-        bool "Enable LVGL for LCD"
-        select PKG_USING_LVGL
-        default n
         if BSP_USING_LVGL
-            config BSP_USING_LCD_ILI9431
-                bool "Enable LVGL for LCD_ILI9431"
-                select PKG_USING_ILI9341
-                select BSP_USING_SPI_LCD
-                default n
-            config BSP_USING_LCD_RGB
-                bool "Enable LVGL for LCD_RGB565"
-                select BSP_USING_LCD
-                default n
+            config BSP_USING_LVGL_DEMO
+                bool "Enable LVGL demo"
+                select PKG_USING_LV_MUSIC_DEMO
+                default y
         endif
 
-    if BSP_USING_LVGL
-        config BSP_USING_LVGL_DEMO
-            bool "Enable LVGL demo"
-            select PKG_USING_LV_MUSIC_DEMO
-            default y
-    endif
-
     endmenu
 
     menu "Board extended module Drivers"
diff --git "a/bsp/renesas/ra6m3-ek/docs/lvgl\344\275\277\347\224\250\346\226\207\346\241\243.md" "b/bsp/renesas/ra6m3-ek/docs/lvgl\344\275\277\347\224\250\346\226\207\346\241\243.md"
index 9ba2d6dfa517b2457edb350829a6ab84ba74edfe..0b9a56b4a7dd77935c4ebc8ce3e5318f8a67dce5 100644
--- "a/bsp/renesas/ra6m3-ek/docs/lvgl\344\275\277\347\224\250\346\226\207\346\241\243.md"
+++ "b/bsp/renesas/ra6m3-ek/docs/lvgl\344\275\277\347\224\250\346\226\207\346\241\243.md"
@@ -68,6 +68,10 @@
 
 ![](picture/lvgl/01.png)
 
+接着在 `RT-Thread online packages → peripheral libraries and drivers → TFT-LCD ILI9341 SPI screen driver software package` 路径下配置 `ILI9341` 屏幕参数
+
+![](picture/lvgl/ili9341.png)
+
 接下来退出菜单界面，输入 `pkgs --update` 命令手动联网获取 lvgl 的软件包到 `packages` 文件夹下
 
 ![](picture/lvgl/02.png)
diff --git a/bsp/renesas/ra6m3-ek/docs/picture/lvgl/ili9341.png b/bsp/renesas/ra6m3-ek/docs/picture/lvgl/ili9341.png
new file mode 100644
index 0000000000000000000000000000000000000000..ee0101bdc2e6e0ea6c805ac673a9d2297e38b3a7
Binary files /dev/null and b/bsp/renesas/ra6m3-ek/docs/picture/lvgl/ili9341.png differ
diff --git a/bsp/renesas/ra6m4-cpk/board/Kconfig b/bsp/renesas/ra6m4-cpk/board/Kconfig
index 693136394c3ad10f53abb9d03edad04b57abbe15..308a32b6801430b01e07683dd44b9f358b7f93c1 100644
--- a/bsp/renesas/ra6m4-cpk/board/Kconfig
+++ b/bsp/renesas/ra6m4-cpk/board/Kconfig
@@ -337,6 +337,12 @@ menu "Hardware Drivers Config"
                 config BSP_USING_SCI_SPI0
                     bool "Enable SCI SPI0 BUS"
                     default n
+                config BSP_USING_SCI_SPI1
+                    bool "Enable SCI SPI1 BUS"
+                    default n
+                config BSP_USING_SCI_SPI2
+                    bool "Enable SCI SPI2 BUS"
+                    default n
                 config BSP_USING_SCI_SPI3
                     bool "Enable SCI SPI3 BUS"
                     default n